TP-Link RE305 User Manual

Displayed below is the user manual for RE305 by TP-Link which is a product in the Network Extenders category. This manual has pages.

Related Manuals

TP-Link RE305 Manual

7106508271 REV3.0.0

Plug the extender into a power outlet next to your router. Wait until its

Power LED turns solid on.

Power On

Relocate

Set Up

Method 3: Via the WPS Button

1. Press the WPS button on your router.

The WPS button might

look like one of these:

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the

extender’s network TP-Link_Extender. If you are

using a computer, unplug the Ethernet cable if any.

Method 1: Via the Tether App

1. Get the up-to-date Tether app.

2. Connect your smartphone to the extender’s

network TP-Link_Extender.

3. Launch the Tether app, and select your extender.

Create a password to log in.

Scan for Tether Tether

1. Plug in the extender about halfway between your router and the Wi-Fi dead

zone. The location you choose must be within the range of your router.

2. Wait for about 2 minutes until the Signal LED turns solid blue. If it doesn't,

relocate the extender closer to the router to achieve better signal quality.

Quick Installation Guide

Range Extender

RE305

Blinking Solid On

Note: If the LED does not turn solid on, try again or use Method 1

or 2.

4. Follow app instructions to complete the setup.

The Signal LED should turn solid on, indicating

successful connection to your router.

Note: If the LED does not turn solid on, refer to FAQ > Q2.

2. Within 2 minutes, press the WPS button on the

extender for 1 second. The Signal LED should

change from blinking to solid on, indicating

successful connection.

3. If the extender connects to a dual band router,

repeat steps 1 and 2 above to connect to the

other band.

Router Devices

Halfway

Enjoy!

Connect your devices to the extender wirelessly or via an Ethernet cable, then

enjoy the internet.

Need setup videos?

Scan the QR code, or visit

https://www.tp-link.com/download/RE305.html

2. Launch a web browser, and enter

http://tplinkrepeater.net or http://192.168.0.254

in the address bar. Create a password to log in.

Note: If the login window does not appear, refer to FAQ > Q1.

http://tplinkrepeater.net

Start

Conrm Password

Create Password

Low Middle High

Extended Network Names:

Router’s network name with

_EXT

at the end

Passwords:

Same as your router

Note:

If you want to change the extended network

names, refer to Access Extender Settings on the

back page.

Tip: For more intuitive location assistant, access extender settings via the Tether app and go to Tools > Location Assistant.

Tip: You can also set up the extender in Access Point mode to transform your existing wired network

to a wireless one. For details, refer to the user guide at https://www.tp-link.com/support.

Solid On

Next to

Laptop

Smartphone

Tablet

Smart TV

Game Console

Desktop

Blue: Suitable location

Red: Too far from router

Connections are available

Wireless Network Connection

Connect automatically Connect

√

TP-Link_Extender

Wi-Fi

TP-Link_Extender

CHOOSE A NETWORK...

Other...

< Settings

My Devices

Local Device

RE305

XX-XX-XX-XX-XX-XX

Solid On

3. Follow web instructions to complete the setup.

The Signal LED should turn solid on, indicating

successful connection to your router.

Note: If the LED does not turn solid on, refer to FAQ > Q2.

Solid On

Q1. What should I do if I cannot access the extender’s web

management page?

Make sure your computer or smartphone has connected to the extender’s

network, and not that of your router. If your router and extender share the same

network name, connect your computer to the extender via an Ethernet cable, or

use the Tether app.

If you are using a computer, make sure it is set to obtain an IP address and DNS

server address automatically.

Verify that http://tplinkrepeater.net or http://192.168.0.254 is correctly entered

in the web browser and press Enter. Note that http://192.168.0.254 applies only

for extenders with factory default settings.

Use another web browser and try again.

Reboot or reset the extender and try again.

If you are still having problems, contact our technical support.

Q2. What should I do if the Signal LED doesn’t turn solid on after

completing setup via the Tether app or web browser?

You may have entered incorrect Wi-Fi passwords for your host networks during

the conguration. Check the passwords and try again.

Make sure the extender is close to your router, preferably within 16 feet, and

away from large electrical appliances.

If you have enabled wireless MAC ltering, wireless access control, or access

control list (ACL) on your router, disable them rst, then follow any method on the

front page to complete the conguration.

Try setting up via the WPS button.

Reset the extender and go through the conguration again.

If you are still having problems, contact our technical support.

Q3. How do I reset the extender?

With the extender powered on, use a pin to press the RESET button for 1

second. The extender will reboot.

LED Explanation

Method 2: Via a Web Browser

Method 1: Via the Tether App

1. Connect your computer or smartphone to the extender’s network

If you are

using a computer, unplug the Ethernet cable if any.

2. Launch a web browser, enter http://tplinkrepeater.net in the address bar,

and log in.

Note: If the login window does not appear, refer to FAQ > Q1.

3. View or change extender settings as needed.

1. Connect your smartphone to the extender‘s or router’s network.

2. Launch the Tether app, select your extender, and log in.

3. View or change extender settings as needed.

Access Extender Settings

After setup, you can access extender settings via any of the methods below.

You can reselect host network, change extended network settings and more.

http://tplinkrepeater.net

Note: If your extender and router use the same network name, Method 1 is recommended.

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device.

Do not use the device where wireless devices are not allowed.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device.

Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

RESET

LED Status Indication (For Range Extender Mode)

The extender is connected or not connected to the

5GHz wireless network of your router.

5GHz On/O

The extender is connected or not connected to the

2.4GHz wireless network of your router.

2.4GHz On/O

The extender is on or o.

The system is starting up or rmware upgrade is in

progress.

Power

On/O

Blinking

The extender is connected to your router’s

wireless network and is in a suitable location.

The extender is receiving a weak signal. Try

relocating it closer to your router.

WPS connection is in progress.

No wireless connection is established.

Signal

Solid blue

Solid red

Blinking

O

Tether

For technical support, the user guide and other information, please

visit https://www.tp-link.com/support, or simply scan the QR code.