TP-Link Talon AD7200 User Manual
Displayed below is the user manual for Talon AD7200 by TP-Link which is a product in the Wired Routers category. This manual has pages.
Quick Installation Guide
AD7200 Multi-band Wi-Fi Router
Connecting the Hardware
Turn on the modem, and
then wait about 2 minutes
for it to restart.
Connect the modem to the
Internet port on your router with
an Ethernet cable.
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, then follow steps 5 and 6 to
complete the hardware connection.
Router
Modem
Power adapter
7106506096 REV1.0.1
Turn off the modem,
and remove the backup
battery if it has one.
2
Place the router horizontally and extend the
antennas to the maximum angle.
1
Note: For best performance, horizontal installation is recommended.
Antenna direction and position can affect performance in vertical
installation situations.
4
3
Turn on the router.
5
Verify that the following LEDs are on and stable before continuing with
the configuration.
6
Internet
On
Internet5GHz
On
60GHz
On
Power
On
2.4GHz
On
AD7200
Note:
1. If all the LEDs are off, press the LED On/Off button for 1 second, then check the LEDs again.
2. If the 2.4GHz, 5GHz, and 60GHz LEDs are off, press the Wi-Fi On/Off button for 2 seconds, then check the
LEDs again in a few seconds.
Power adapter
Configuring the Router
Wired
Connect your computer to the router (wired or wireless).
1.
Enter http://tplinkwifi.net or http://192.168.0.1 in the address bar of a web
browser. Use admin for both username and password, and click Login.
Note: If the login page does not appear, please refer to FAQ > Q1.
A
Login
●●●●●
admin
http://tplinkwifi.net
Click Quick Setup, select your time zone, and click Next.
C
Internet Connection Type
Time Zone
Wireless Settings
Summary
Test Internet Connection
NextExit
(GMT-08:00) Pacific Time
Time Zone:
Create a new username and password, then click Confirm. Re-login using the
new credentials.
B
HighMiddleLow
Confirm
User_123
New Username:
●●●●●●●●
New Password:
●●●●●●●●
Confirm New Password:
FAQ (Frequently Asked Questions)
Q1. What can I do if the login page does not appear?
A1. If the computer is set to a static or fixed IP address, change the setting to obtain
an IP address automatically.
A2. Verify that http://tplinkwifi.net is correctly entered in the web browser.
Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web browser
and press Enter.
A3. Use another web browser and try again.
A4. Reboot your router and try again.
A5. Disable then re-enable the network adapter being used.
Q2. What can I do if I cannot access the Internet?
A1. Check if the Internet is working properly by connecting a computer directly to
the modem using an Ethernet cable. If it is not, contact your Internet Service
Provider.
A2. Log into the Web Management page of the router, and go to the Basic >
Network Map page to check whether the Internet IP address is valid or not. If it is,
please run the Quick Setup again; otherwise, recheck the hardware connection.
A3. For cable modem users, log into the Web Management page of the router. Go to
Advanced > Network > Internet > MAC Clone, click Use Current Computer
MAC Address and click Save, then reboot both the modem and the router.
A4. Reboot your router and try again.
Q3. How do I restore the router to its factory default settings?
A1. While the router is powered on, press and hold the Reset button on the back for
about 10 seconds until all LEDs go on, then release the button.
A2. Log into the Web Management page of the router. Go to Advanced > System
Tools > Backup & Restore, and click Factory Restore. The router will restore and
reboot automatically.
Q4. What can I do if I forgot my web management password?
A. Refer to FAQ > Q3 to reset the router, and then use the default admin (all
lowercase) for both username and password to log in.
Q5. What can I do if I forgot my wireless network password?
A1. The factory default Wireless Password/PIN is printed on the product label of the
router.
A2. Log into the router’s Web Management page, and go to Basic > Wireless to
obtain or reset your wireless password.
To learn more about the USB features,
visit http://www.tp-link.com/app/usb/, or simply scan the QR code.
USB Features
Use the USB ports for media sharing, storage sharing and printer sharing across your
local network. You can also set up an FTP server to access your files remotely through
the Internet.
Remote Access
via FTP Server Media Sharing Local Storage
Sharing Printer Sharing
USB 3.0 Port
Ethernet Cable
Connect wirelessly by using the SSIDs
(network names) and Wireless Password
printed on the product label at the bottom
of the router.
You can also connect by pressing the WPS
button on the front panel of the router.
For more information about WPS, refer to
the User Guide at www.tp-link.com.
Wireless
Turn off the Wi-Fi on your computer and connect the devices as shown below.
©2016 TP-LINK
Confirm your settings, and then click Save.
F
Test your Internet connection, then click Finish to complete the Quick Setup.
G
Internet Connection Type Wireless Settings
Summary
Test Internet Connection
FinishBack
Congratulations!
You have completed the Quick Setup process.
Click Test Internet Connection below, then click Finish.
Test Internet Connection
Time Zone
Use the default or change the wireless settings, and click Next.
Note: If you change the default SSID and password, please note the new wireless settings.
E
Internet Connection Type Wireless Settings
Summary
Test Internet Connection
Next
Back
2.4GHz Wireless:
Network Name(SSID):
Password:
TP-LINK_7A30
12345670
Hide SSID
Enable Wireless Radio
5GHz Wireless:
Network Name(SSID):
Password:
TP-LINK_7A30_5G
12345670
Hide SSID
Enable Wireless Radio
60GHz Wireless:
Network Name(SSID):
Password:
TP-LINK_7A30_60G
12345670
Hide SSID
Enable Wireless Radio
Time Zone
Select your Internet Connection Type, or click Auto Detect if you are unsure of
what your connection type is. Click Next and follow the instructions.
D
Next
Auto Detect
Dynamic IP
Static IP
PPPoE
L2TP
PPTP
Note: If you are not sure which Internet Connection Type you have, use Auto Detect or contact
your Internet Service Provider (ISP) for assistance.
Back
Internet Connection Type Wireless Settings Test Internet Connection
Summary
Time Zone
To conveniently manage your network, scan the QR code to
download the Tether app on your mobile device.
Tether App
USB 3.0 Port
Configure the router via a web browser.
2.