TP-Link TL-SG1016D User Manual
Displayed below is the user manual for TL-SG1016D by TP-Link which is a product in the Network Switches category. This manual has pages.
16/24-Port Gigabit Switch
MODELS: TL-SG1016D/ TL-SG1024D Datasheet
The TL-SG1016D/TL-SG1024D Gigabit Ethernet Switch represents a high-performance,
low-cost, simple, seamless, and standardized upgrade that allows you to transform your
existing network and achieve 1000Mbps speeds. All 16/24 ports support auto MDI/MDIX, so
there is no need to worry about cable types. Simply plug and play. With the innovative
energy-ecient technology, the TL-SG1016D/TL-SG1024D can reduce power consumption
and the vast majority of its packaging material can be recycled, making it an eco-friendly
solution for your business network.
Overview
Enhanced Performance
TP-Link Green Technology
The new TL-SG1016D/TL-SG1024D Gigabit Switch features a variety of energy-ecient
technologies that allow you to increase your network capacity while consuming less power.
The switch limits the carbon footprint of your network by automatically adjusting power con-
sumption in accordance with link status and cable length. It complies with the EU RoHS, which
prohibits the use of certain hazardous
materials, and most of the packaging material is recyclable.
All 16/24 ports are Gigabit RJ-45 ports, allowing them to support large le transfers and
makes them compatible with 10Mbps and 100Mbps Ethernet devices. Since both switches
feature a non-blocking switching architecture, the TL-SG1016D and TL-SG1024D forward
and lter packets at full wire-speed, achieving maximum throughput. 10KB Jumbo frame
signicantly improves performance during large le transfers. IEEE 802.3x ow control
supports Full Duplex mode and backpressure for Half Duplex mode alleviates trac
congestion to make the TL-SG1016D/TL-SG1024D more reliable. This makes the
TL-SG1016D/TL-SG1024D a perfect choice for upgrading your network to Gigabit speed
while protecting your previous investment.
Easy of Use
The automated features of this gigabit switch make installation hassle-free. No conguration is
required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each
port senses the link speed of network devices (10,100, or 1000 Mbps) and intelligently adjusts
for compatibility and optimal performance.
Product Picture
Model TL-SG1016D TL-SG1024D
Hardware
Features
Standards and Protocols IEEE 802i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1p
Interface 16 10/100/1000Mbps RJ45 Ports,
Auto Negotiation/Auto MDI/MDIX
24 10/100/1000Mbps RJ45 Ports,
Auto Negotiation/Auto MDI/MDIX
Forwarding Mode Store-and-Forward
Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m)
Power Supply 100-240VAC, 50/60Hz
Green Technology Yes
802.1p/DSCP QoS Yes
LED Power, 1000Mbps, Link/Act
Dimensions 11.6*7.1*1.7 in. (294*180*44 mm)
Fanless Yes
Performance
Switching Capacity 32Gbps 48Gbps
Packet Forwarding Rate 23.8Mpps 35.7Mpps
MAC Address Table 8K
Jumbo Frame 10KB
Max Power Consumption 9.26W (220V/50Hz) 13.08W (220V/50Hz)
Max Heat Dissipation 31.60 BTU/h 44.63 BTU/h
CE, FCC, RoHS
Environment
Operating Temperature 0°C~40°C (32°F~104°F)
Storage Temperature -40°C~70°C (-40°F~158°F)
Operating Humidity 10%~90%RH non-condensing
Storage Humidity 5%~90%RH non-condensing
Ordering Information 16-Port Gigabit switch 24-Port Gigabit switch
Specications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or
registered trademarks of their respective holders. Copyright @ 2016 TP-Link Technologies Co., Ltd. All rights reserved.
Features & Performance
Specications
www.tp-link.com