TP-Link TL-WA801N User Manual

Displayed below is the user manual for TL-WA801N by TP-Link which is a product in the Wireless Access Points category. This manual has pages.

Before your start

Operation Mode

Access Point Mode

(Default Mode)

Range Extender Mode

Scenario

You want to transform your wired (Ethernet) network to a

wireless one.

Which mode do you need? Refer to the table to choose a proper mode.

Multi-SSID Mode

You want to connect your devices to dierent wireless

networks and become isolated by VLANs.

Client Mode

You have a wired device with an Ethernet port and no wireless

capability, for example, a Smart TV, Media Player, or game

console. You want to connect it to the internet wirelessly.

You are in a Wi-Fi dead-zone or a place with weak wireless

signal. You want to have a larger eective range of the

wireless signal throughout your home or oce.

Access Point Mode (Default) Transforms your existing wired network to a wireless one.

Quick Installation Guide

Congure the Access Point

Tips for Optimal Wireless Signal

• Halfway is the best way.

Generally, the ideal location for a repeater is about halfway between your wireless router and your

wireless clients and make sure that the location you choose is within the range of the host router. If

that is not possible, place it closer to your wireless router to ensure stable performance.

• Less obstacles ensure better performance.

Choose a location with less obstacles around that may block the signal between the access point and

the host network. An open corridor or a spacious location is ideal.

• Less interference provides more stability.

Choose a location away from Bluetooth devices and other household electronics, such as cordless

phones, microwaves, and baby monitors to minimize signal interference.

Router Devices

Halfway

1. Connect the access point according to Step A to D in the diagram.

2. Turn on the power, and wait until the Power ( ) and Wireless ( ) LEDs are lit

and stable.

3. Use the default SSID and Password printed on the label of the access point to

join its Wi-Fi network.

Note: You can surf the internet now. For your wireless network security, it is recommended to change the default SSID

(network name) and the password of your Wi-Fi network. To do so, perform the following steps. Enjoy!

4. Launch a web browser and enter http://tplinkap.net. Create a password to log in.

5. Click Quick Setup, select Access Point mode and click Next. Follow the

step-by-step instructions to complete the conguration.

6. Now, reconnect your wireless devices to the new Wi-Fi network.

Range Extender Mode Extends the range of an existing Wi-Fi network.

1. Connect the access point according to Step A and B in the diagram.

2. Turn on the power, and wait until the Power ( ) and Wireless ( ) LEDs are lit

and stable.

3. Use the default SSID and Password printed on the label of the access point to

join its Wi-Fi network.

4. Launch a web browser and enter http://tplinkap.net. Create a password to log in. Enjoy!

5. Click Quick Setup, select Range Extender mode and click Next. Follow the

step-by-step instructions to complete the conguration.

6. Relocate the access point to a suitable place. For details, refer to the tips below.

7. Now, connect your devices to the access point wirelessly or via an Ethernet

cable.

Existing Router

Internet

TL-WA901N’s SSID

TL-WA901N is used for demonstration in this guide.

Images may dier from actual product.

Internet Host AP’s SSID TL-WA901N’s SSID

OR OR

TV Other

Wired

Devices

Setup with videos

Scan QR code or visit

www.tp-link.com/support/setup-video/

SSID 1 for VLAN 1

SSID 2 for VLAN 2

SSID 3 for VLAN 3

SSID 4 for VLAN 4

Creates multiple wireless networks to provide dierent security and VLAN groups.

Multi-SSID Mode

VLAN 1

VLAN 2

VLAN 3

VLAN 4

Existing Router

Internet

Frequently Asked Questions (FAQ)

Q1. How do I restore the access point to its factory default settings?

• With the access point powered on, use a pin to press and hold the RESET button until the Power LED starts

blinking, and then release the button.

Note: Resetting the access point will clear all previous congurations, and the access point will reset to the default Access Point

mode.

Q2. What should I do if I cannot access the web management page?

• If the computer has a static IP address, change its settings to obtain an IP address automatically.

• Verify that http://tplinkap.net or http://192.168.0.254 is correctly entered in the web browser.

• Use another web browser and try again.

• Reboot your access point and try again.

• Power o your host AP and enter http://tplinkap.net in the web browser to try again.

Q3. How do I recover the access point’s web management password or retrieve my Wi-Fi password?

• If you forget the password for the web management page, refer to Q1 to reset the access point to its factory

default settings.

• If your forget your Wi-Fi password, but are able to log in to the web management page, log in and go to Wireless

> Wireless Security to retrieve or reset your Wi-Fi password.

Client Mode Connects your wired devices to a wireless network.

D A

Safety Information

• Keep the device away from water, re, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device.

• Do not use any other chargers than those recommended.

• Do not use damaged charger or USB cable to charge the device.

• Do not use the device where wireless devices are not allowed.

• Adapter shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or

damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

1. Connect the access point according to Step A to B in the diagram.

2. Turn on the power, and wait until the Power ( ) and Wireless ( ) LEDs are lit

and stable.

3. Use the default SSID and Password printed on the label of the access point to

join its Wi-Fi network.

Enjoy!

4. Launch a web browser and enter http://tplinkap.net. Create a password to log in.

5. Click Quick Setup, select Client mode and click Next. Follow the step-by-step

instructions to complete the conguration.

6. Now, connect your wired device to the access point via an Ethernet cable.

1. Connect the access point according to Step A to D in the diagram.

2. Turn on the power, and wait until the Power ( ) and Wireless ( ) LEDs are lit

and stable.

3. Use the default SSID and Password printed on the label of the access point to

join its Wi-Fi network. Enjoy!

4. Launch a web browser and enter http://tplinkap.net. Create a password to log in.

5. Click Quick Setup, select Multi-SSID mode and click Next. Follow the

step-by-step instructions to complete the conguration.

6. Now, connect your wireless devices to the Wi-Fi networks isolated by VLANs.

Q4. What should I do if my wireless network is not stable?

This could be caused by interference. You can try the following methods:

• Log in to the web management page. Go to Wireless > Wireless Settings and change your wireless channel to a

dierent one.

• Move the access point to a new location away from Bluetooth devices and other household electronics, such as

cordless phones, microwaves, and baby monitors to minimize signal interference.

Power the device with the included passive PoE injector when the access point is located far from a power outlet.

Note: The passive PoE injector supports a cable length up to 30 meters, but the value may vary due to the environment.

Power on via the PoE Injector

Passive PoE InjectorExisting Router

Internet

TL-WA901N’s SSID

If you have any suggestions or needs on the product guides, welcome to email

techwriter@tp-link.com.cn.

To ask questions, find answers, and communicate with TP-Link users or engineers,

please visit https://community.tp-link.com to join TP-Link Community.

For technical support, the user guide and other information, please

visit https://www.tp-link.com/support, or simply scan the QR code.

Internet Host AP’s SSID

OR OR

TV Other

Wired

Devices