Table of Contents
- About This Guide
- Get to Know Your Powerline Extender
- Initial Use
- Configuring via Web Management Interface
TP-Link TL-WPA7517 KIT User Manual
Displayed below is the user manual for TL-WPA7517 KIT by TP-Link which is a product in the PowerLine Network Adapters category. This manual has pages.
Related Manuals
©2020 TP-Link 1910012909 REV1.0.0
User Guide
AV1000 Gigabit Powerline ac Wi-Fi Extender
TL-WPA7517
Contents
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Chapter 1. Get to Know Your Powerline Extender . . . . . . . . . . . . . . . . . . . .2
1. 1. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 2. Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 3. Product Appearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 3. 1. LED Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 3. 2. Physical Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 2. Initial Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2. 1. To Set Up a New Secure Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. 2. To Extend the Existing Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 3. Conguring via Web Management Interface. . . . . . . . . . . . 11
3. 1. Management Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. 1. 1. Log In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. 2. Manage Powerline Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3. 2. 1. Add a New Device to the Powerline Network . . . . . . . . . . . . . . . . . . . . . . . . 13
3. 2. 2. Change Powerline Network Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3. 3. Wi-Fi Move . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3. 4. Wi-Fi Clone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3. 5. Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3. 5. 1. Customize Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3. 5. 2. Wireless Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3. 6. LED Schedules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3. 7. Schedule Your Wireless Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3. 8. Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3. 9. Guest Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3. 10. MAC Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3. 11. Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3. 11. 1. LAN IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3. 11. 2. Set Up System Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3. 11. 3. Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3. 11. 4. Back Up and Restore Conguration Settings . . . . . . . . . . . . . . . . . . . . . . . . 27
3. 11. 5. Change Login Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3. 11. 6. System Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
1
About This Guide
This guide is a complement to Quick Installation Guide. The Quick Installation Guide
provides instructions for quick Internet setup, while this guide contains details of each
function and demonstrates how to configure them in typical scenarios.
When using this guide, please notice that features of the powerline adapter and
extender may vary slightly depending on the model and software version you have, and
on your location and language. All images, parameters and descriptions documented in
this guide are used for demonstration only.
Conventions
In this guide the following conventions are used:
Convention Description
Powerline extender Stands for AV1000 Powerline Wi-Fi Extender without any explanation.
Teal_Underlined Hyperlinks are in teal and underlined. You can click to redirect to a
website or a specific section.
Teal Key information appears in teal, including management page text such
as menus, items, buttons and so on.
>
The menu structures to show the path to load the corresponding page.
For example, Wireless > MAC Filter means the MAC Filter function page
is under the Wireless menu.
Note: Ignoring this type of note might result in a malfunction or damage to
the device.
Tips: Indicates important information that helps you make better use of your
device.
Symbols on the
web page
•click to edit the corresponding entry.
•click to delete the corresponding entry.
•click to enable or disable the corresponding entry.
More Info
•The latest software, management app and utility are available from the Download
Center at https://www.tp-link.com/support/download/.
•The Quick Installation Guide (QIG) can be found where you find this guide or inside the
product packaging.
• Specifications can be found on the product page at https://www.tp-link.com.
•Our Technical Support contact information can be found at the Contact Technical
Support page at https://www.tp-link.com/support.
•TP-Link Community is provided for you to discuss our products and share knowledge
at https://community.tp-link.com/.
3
Chapter 1 Get to Know Your Powerline Extender
1. 1. Product Overview
TP-Link’s Powerline Wi-Fi Extender is a combined wired/wireless network expansion
device. With the help of your home’s existing electrical circuitry, it can extend your Wi-Fi
to wherever you want in your house.
Ethernet ports and built-in antennas enable the powerline Wi-Fi extender to provide
wired and wireless access for multiple computers and mobile devices.
With an array of additional features, the powerline Wi-Fi extender is the perfect choice
for your home or business network.
1. 2. Main Features
• HomePlug AV2 Standard Compliant: Provides users with stable, high-speed data
transfer rates of up to 1000 Mbps on a line length of up to 300 meters.
• One-Touch Wi-Fi Configuration: With just a tap, copy your router’s wireless settings
onto the extender to share the same SSID and password.
• Gigabit Ethernet for Reliable Connections: Provide warp-speed wired connections for
4K HD streaming, lag-free gaming, and more.
• Easy Setup and Management: Quickly set up a secured Powerline network with Plug &
Play and easily manage it via the tpPLC app, Utility, and/or Web Interface.
1. 3. Product Appearance
Your powerline extender may differ in appearance slightly from that depicted because
of the region and product version. European version is used for demonstration in this
guide.
1. 3. 1. LED Legend
LEDs indicate the powerline extender’s working status. For more details, please refer to
the following table.
4
Chapter 1 Get to Know Your Powerline Extender
Name Status Indication
Power
On/Off The powerline extender is on or off.
Blinking Quickly: Pairing is in progress.
Slowly: Power-saving Mode is on.*(TL-PA7017 Only)
Powerline
On The powerline extender is connected to the powerline
network and is in a suitable location.
Off The powerline extender is not connected to any
powerline network.
Ethernet
On At least one Ethernet port is connected to a powered-on
device.
Off No Ethernet port is connected to a powered-on device.
Wireless
On The wireless function is enabled.
Off The wireless function is disabled.
Blinking
Slowly: The powerline extender is cloning wireless
network settings from the main router.
Quickly: The powerline extender is syncing wireless
network settings.
1. 3. 2. Physical Interface
Plug
Pair/Reset Button
Ethernet Port
Wi-Fi Button
LED ON/Off Button
5
Chapter 1 Get to Know Your Powerline Extender
Ethernet Port
Connect the Ethernet ports to your wired devices, such as a computer, a router or a
game console, via Ethernet cables.
Pair/Reset Button
Press and hold the button for 1 second to join a powerline network. Go to To Set Up a
New Secure Wireless Network for more information.
Press and hold the Pair button for at least 6 seconds, then release the button to reset
the adapter/extender to default settings.
LED On/Off Button
Press to turn on or off the LEDs.
Wi-Fi Button
Press and hold the button for 1 second to copy wireless settings from the main router
to the extender. Go to Wi-Fi Clone for more information.
Press and hold the button for about 5 seconds to turn the wireless function on or off.
The wireless function is on by default.
Plug
The powerline adapter has a Plug that can be connected to any standard power socket.
Note:
1. The provided plug may differ from the picture due to different regional power specifications.
2. Use the product in below directions.
3. Plug the product directly into a wall socket instead of a power strip.
Wall Outlet Power Strip
7
Chapter 2 Initial Use
2. 1. To Set Up a New Secure Wireless Network
Use the Powerline Wi-Fi Kit to set up a new secure wireless network in my house.
For example, I have a wireless router in my house, but the wireless signal cannot reach
every corner. So I bought a Powerline Wi-Fi Kit to extend the wireless network. The
Powerline Wi-Fi Kit includes a powerline adapter and a powerline extender.
1. Connect the powerline adapter to an available LAN port of the router.
2. Plug the powerline adapter into a wall socket.
3. Plug the powerline extender into a wall socket near the adapter.
Ethernet Cable
Extender
TL-WPA7517
Adapter
TL-PA7017
Powerline
Router
WAN LAN
4. Pair the powerline devices.
a . Press the Pair button on the powerline adapter for 1 second. The Power LED starts
blinking.
Note: If the Power LED does not blink, press the Pair button again.
a . Within two minutes, press the Pair button on the powerline extender for 1 second.
The Power LED starts blinking. When the Powerline LED turns solid on, the pairing
process is complete.
I want to:
How can I do that?
8
Chapter 2 Initial Use
5. Relocate the extender to the Wi-Fi “dead” zone. Use the SSID (network name) and
password on the label at the top of the extender.
Note: A blinking Powerline LED indicates poor signal strength. Move the extender to another location.
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Wireless Password:XXXXXXXX
SSID:TP-LINK_XXXX
SSID:TP-LINK_XXXX_5G
Wireless Password:XXXXXXXX
Now enjoy the internet!
2. 2. To Extend the Existing Wireless Network
Extend the existing wireless network by adding a new powerline extender to the existing
powerline network.
For example, I already set up a wireless network using powerline devices, but the
wireless network is still not big enough to reach the top floor. So I bought a new powerline
extender to extend the wireless network.
1. Plug the new powerline extender into a wall socket near one of the existing powerline
extender.
Done!
I want to:
How can I do that?
9
Chapter 2 Initial Use
New Powerline Extender
TL-WPA7517
Existing Powerline Device
(For demonstration only)
Powerline
2. Check the new extender’s Powerline LED . Is it on?
• If it is on, follow Step 4 > A.
• If it is off, follow Step 3 and Step 4 > B.
3. Add the new powerline extender to the existing powerline network by pairing two
powerline devices.
a . Press the Pair button on the existing powerline device for 1 second. The Power
LED starts blinking.
Note: If the Power LED does not blink, press the button again.
b . Within two minutes, press the Pair button on the new powerline extender for 1
second. The Power LED starts blinking. When the Powerline LED turns solid on,
the pairing process is complete.
Existing
Powerline Device
Blinking
New Powerline Extender
TL-WPA7517
Blinking
On
Within 2 minutes
4. Relocate the new extender to the Wi-Fi “dead” zone.
Note: A blinking Powerline LED indicates poor signal strength. Move the extender to another location.
A . Use the SSID (network name) and password on the on the label at the top of the
extender to connect to the internet.
C . If you cannot find the default SSID in your Wi-Fi network list, this may mean the
Wi-Fi Move feature has automatically copied over the existing wireless settings.
10
Chapter 2 Initial Use
In this case, use the SSID and password of your existing powerline network to
connect.
Enjoy the internet through your extended network!
Done!
Chapter 3
Configuring via Web
Management Interface
The powerline extender has a management interface to configure all settings. The
management interface can be opened on any device that has a web browser, such as
Internet Explorer, Chrome or Firefox. This chapter is going to give detailed information
on what functions the powerline extender has and how to configure them.
It contains the following sections:
• Management Interface
• Manage Powerline Network
• Wi-Fi Move
• Wi-Fi Clone
• Wireless Network
• LED Schedules
• Schedule Your Wireless Function
• Parental Controls
• Guest Network
• MAC Filter
• Administration
12
Chapter 3 Conguring via Web Management Interface
3. 1. Management Interface
3. 1. 1. Log In
There are two methods to log in to the management interface.
Method 1: Via web browser
Follow the steps below:
1. Connect your device to the powerline extender wirelessly.
2. Launch a web browser and type in http://tplinkplc.net to open the management
interface.
3. Create a password to log in.
4. Click Login.
Method 2: Via tpPLC utility
Follow the steps below:
1. Connect your computer to the powerline extender via an Ethernet cable or wirelessly.
2. Obtain and install the tpPLC Utility from the product’s Support page at
https://www.tp-link.com/support.
3. Open the utility, move your mouse over your powerline extender, and click the
icon that appears beside it.
4. Create a password to log in.
Method 3: Via tpPLC app
1. Connect your computer to the powerline extender wirelessly.
2. Obtain and install the tpPLC app from App Store or Google Play, or simply scan the
QR code.
13
Chapter 3 Conguring via Web Management Interface
3. Connect your phone to the wireless network of the extender. Then launch the app
and you can see the extender you added on Device list.
4. Create a password to log in.
3. 2. Manage Powerline Network
A powerline network is formed of powerline devices, including adapters and extenders.
Powerline devices in the same powerline network share the same powerline network
name.
3. 2. 1. Add a New Device to the Powerline Network
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the password you set for the extender.
2. Go to the Status page and click the Powerline Network icon to open the Powerline
Device List.
3. Click the add icon and enter the Powerline Key of the device you want to add. The
Powerline Key contains 16 capital letters, formed like XXXX-XXXX-XXXX-XXXX. It is
printed on the back of the powerline device.
4. Click ADD to add the device.
3. 2. 2. Change Powerline Network Name
You can change the extender’s powerline network name to add it to or remove it from a
powerline network.
Follow the steps below to change the name.
14
Chapter 3 Conguring via Web Management Interface
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to Basic > Powerline.
3. Change the Network Name. You can also click Default to use the default network
name, e.g. HomePlugAV. However, if the default name is used, the Wi-Fi Move function
will be automatically disabled.
4. Click Save to make the settings effective.
3. 3. Wi-Fi Move
Wi-Fi Move is enabled by default. With the feature enabled, any changes made to the
Wi-Fi settings and LED schedules of one powerline extender will be automatically
synchronized to other powerline extenders whose Wi-Fi Move feature is also enabled
on the same powerline network .
Follow the steps below to enable the Wi-Fi Move feature:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to Advanced > Wireless > Wi-Fi Move.
3. Toggle on WiFi Move to enable the feature.
Note:
When Wi-Fi Move is enabled, the following features will be synced: Wireless SSID & Password, Wireless
Security, Wireless Mode, Wireless Radio Status, Wi-Fi Schedules, LED Schedules, Wi-Fi Clone Settings,
MAC Filter Settings, Parental Controls, and Guest Network.
3. 4. Wi-Fi Clone
I want to:
15
Chapter 3 Conguring via Web Management Interface
Copy wireless settings from my router to my extender, so I can use the same SSID and
password to access the internet in my house.
1. Before cloning, make sure your router supports the same band as your extender.
If you do not know how to check this, go to your router’s User Guide for more
information.
2. Plug your extender near your router.
3. Press the WPS button on your router.
4.
Wireless Router
WPS/
WPS
5. Within two minutes, press the Wi-Fi button on the front panel of the extender for 1
second. The Wi-Fi LED starts blinking.
Extender
Blinking
On
Wi-Fi
When the Wi-Fi LED blinks quickly for 3 seconds and then stays on, the Wi-Fi Clone
process is complete.
Note: By default, both band settings will be copied, but if you just want to copy one band settings, go to
Advanced > Wireless > Wi-Fi Clone, and select the band you want to copy then follow the steps above.
How can I do that?
Done!
16
Chapter 3 Conguring via Web Management Interface
3. 5. Wireless Network
3. 5. 1. Customize Wireless Settings
The powerline extender’s wireless network name (SSID), password, and security option
are preset in the factory. The preset SSID and password can be found on the product
label. You can customize the wireless settings according to your needs.
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
Go to Basic > Wireless Settings page.
To enable or disable the wireless function:
Select the box to enable the wireless function. Deselect the box to disable wireless
function. If disabled, all wireless settings will be ineffective.
To change the wireless network name (SSID) or hide SSID :
The default SSIDs are TP-Link_XXXX and TP-Link_XXXX_5G, and the default password
is printed on the product label. You can change the default ones by directly entering new
ones in the field. SSID is up to 32 characters, and the value in both SSID and password
is case-sensitive.
Select Hide SSID, and your SSID will not be broadcasted. It won’t display when you scan
for local wireless network list on your wireless device and you need to manually join the
network.
Note:
Remember to write down the new SSIDs, for you will be disconnected when new settings are effective.
17
Chapter 3 Conguring via Web Management Interface
To customize more advanced settings
Security: Select an option from the Security drop-down list. The extender provides
three options, No Security, WPA/WPA2 Personal (Recommended), and WEP. WPA2
uses the newest standard and the security level is the highest. Don’t change the default
settings unless necessary.
Version: You can select one of following versions.
• Auto (Recommended) - Select WPA-Personal or WPA2-Personal automatically
based on the wireless station’s capability and request.
• WPA-PSK - Pre-shared key of WPA.
Ecryption: You can select either Automatic(Recommended), TKIP or AES
Password: Set the password of the Wi-Fi network.
Channel: Select the channel you want to use from the drop-down list. This field
determines which operating frequency will be used. It is not necessary to change the
wireless channel unless you notice interference problems with another nearby access
point.
Mode: Select the desired mode.
• 802.11n only: Select only if all of your wireless clients are 802.11n devices.
• 802.11g/n mixed: Select if you are using both 802.11g and 802.11n wireless clients.
• 802.11b/g/n mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless
clients.
Note: When 802.11n only mode is selected, only 802.11n wireless clients can connect to the extender. It
is strongly recommended that you select 802.11b/g/n mixed, so that all of 802.11b, 802.11g, and 802.11n
wireless clients can connect to the extender.
Channel Width: Select the channel width. The default setting is Auto, which can adjust
the channel width for your clients automatically.
Transmit Power: Select the level of transmit power. We recommend you choose High to
have the best signal strength.
18
Chapter 3 Conguring via Web Management Interface
3. 5. 2. Wireless Clients
Follow the steps below to view detailed information of all wireless clients connected to
the extender.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to Wireless > Clients page.
3. Now you can view the detailed information, including device name, MAC address,
connected wireless band, and IP address.
Tips: You can also see the wireless details by clicking the wireless clients icon on the Status > Wireless
Clients page.
3. 6. LED Schedules
Automatically turn off LEDs at times when I do not want light in my room.
For example, I want to turn LEDs off from 21:00 to 08:00 every weekday.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net and log in
with the username and password you set for the extender.
2. Go to Wireless > Device Settings > LED Control.
3. Enable LED Status to turn on the extender’s LEDs.
I want to:
How can I do that?
19
Chapter 3 Conguring via Web Management Interface
4. Enable LED Schedule.
5. Click Add and choose LED Off Time from 21:00 to 08:00 (next day).
Note: Please make sure that the system time is correct before using this function.
6. Click SAVE.
Now your LEDs will be turned off automatically at 21:00 and turned on at 8:00am the
next morning.
3. 7. Schedule Your Wireless Function
Automatically turn off my wireless network at times when I do not need the wireless
connection.
For example, I want to turn them off from 21:00 to 09:00 every weekday.
Done!
I want to:
20
Chapter 3 Conguring via Web Management Interface
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net and log in
with the username and password you set for the extender.
2. Go to Advanced > Wireless > WiFi Schedule.
3. Toggle on the WiFi Schedule.
Note: If you check the box of Do not turn off Wi-Fi while clients are connected to it, the WiFI schedule are
not enabled when any clients are connected to your extender.
4. Click Add to add an entry.
5. Choose WiFi Off Time from 21:00 to 09:00, and then check all boxes from Monday
to Friday.
Note: Please make sure that the system time is correct before using this function.
6. Click SAVE to save the settings.
How can I do that?
21
Chapter 3 Conguring via Web Management Interface
Now your Wi-Fi will be automatically turned off at 00:00 and turned on at 7:00am the
next morning.
Note: The Wi-Fi LED will turn off if the wireless network is disabled.
3. 8. Parental Controls
Control when my children’s wireless devices can access the internet.
For example, I want to allow my children’s wireless devices to access only from 18:00
(6PM) to 22:00 (10PM) on weekdays and not other times.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in
with the username and password you set for the extender.
2. Go to Advanced > Parental Controls.
Done!
I want to:
How can I do that?
22
Chapter 3 Conguring via Web Management Interface
3. Toggle on Parental Controls.
4. Click Add.
5. Click Select from Device List and select the device to be controlled. Or select Add
Manually and enter the MAC address manually.
6. Choose Internet Access Time from 18:00 to 22:00, and then check all boxes from
Sunday to Saturday.
7. Give a description to the device to be controlled.
8. Click SAVE to save the settings.
Note: Please make sure that the system time is correct before using this function.
Now the controlled device can access only from 18:00 (6PM) to 22:00 (10PM) on
weekdays and not other times.
3. 9. Guest Network
Create a network for my guests, providing internet access for them while at the same
time limit the network authorities for guests to ensure network security and privacy.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in
with the password you set for the extender.
2. Go to Advanced > Guest Network.
3. Check the box of relative entry to limit network authorities.
4. Select 2.4GHz or 5GHz and configure the following settings.
Done!
I want to:
How can I do that?
23
Chapter 3 Conguring via Web Management Interface
To enable or disable the guest network function:
Select the box 2.4GHz or 5GHz to enable the guest network function. Deselect the
box to disable guest network function. If disabled, all guest network settings of the
corresponding band will be ineffective.
To change the guest network name (SSID) and password:
The default SSIDs are TP-Link_Guest_XXXX and TP-Link_Guest_XXXX_5G, and the
default password is printed on the product label. You can change the default ones by
directly entering new ones in the field. SSID is up to 32 characters, and the value in both
SSID and password is case-sensitive.
Now you can tell your guests to connect to the guest network
you created.
3. 10. MAC Filter
This function exploits the uniqueness of the MAC (Medium Access Control) address,
a unique 12-digit hexadecimal address (for example, D8-5D-4C-B4-46-EA) of every
network device, to determine if the device can or cannot access your wireless network.
Prevent unauthorized users from accessing my wireless network by utilizing the network
device’s MAC address.
For example, I have a computer that is connected to my wireless network. Now, an
unknown device (an intruder) is also using my wireless network, which affects my
internet speed. I would like to control my wireless network with the following capabilities:
• My computer is always allowed to access the wireless network.
• The unknown device is not allowed to access the wireless network.
• I don’t have to keep changing my wireless password as often.
Done!
I want to:
24
Chapter 3 Conguring via Web Management Interface
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in
with the username and password you set for the extender.
2. Go to Advanced > Wireless > MAC Filter.
3. Toggle on MAC Filter.
4. Select either of the filtering rules (here we select Black List).
5. Click Add to add devices to the list.
6. Select Select From Device List to see how many devices are now connected to the
network. Select a device and click ADD to finish the settings.
7. You can also add devices manually. Select Add Manually, enter device name and the
MAC address and click ADD to finish the settings.
Now MAC Filter is implemented to protect your wireless network.
How can I do that?
Done!
25
Chapter 3 Conguring via Web Management Interface
3. 11. Administration
3. 11. 1. LAN IP Address
Follow the steps below to configure LAN settings of the extender.
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
Go to Device Settings > LAN Settings.
LAN Type: Select Obtain an IP address automatically to have your extender automatically
obtain IP Address from the main router. Select Use the following IP address to manually
configure the LAN parameters.
IP Address: The IP address of the powerline extender.
Subnet Mask: The subnet mask associated with IP address.
Gateway: The IP address of the gateway device.
Primary DNS: Input the DNS IP address provided by your ISP.
Secondary DNS: Input the IP address of another DNS server if your ISP provides two
DNS servers.
3. 11. 2. Set Up System Time
System time is the time displayed while the extender is running. The system time you
configure here will be used for other time-based functions like Parental Controls and
Wi-Fi Schedules. You can manually set how to get the system time.
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
Go to Settings > Time Settings page.
26
Chapter 3 Conguring via Web Management Interface
To automatically synchronize the time:
1. Select Get from the Internet.
1. Select your local Time Zone from the drop-down menu.
2. In the NTP Server I field, enter the IP address or domain name of your desired NTP
Server. (Optional)
3. In the NTP Server II field, enter the IP address or domain name of the second NTP
Server. (Optional)
4. Click SAVE .
To manually set the date and time:
1. Select Manually.
2. Enter the current Date.
3. Set the current Time (In 24-hour clock format, e.g. 16:00:00 is 04:00PM).
4. Click SAVE .
To set up Daylight Saving time:
1. Check the box of Daylight Saving Time.
27
Chapter 3 Conguring via Web Management Interface
2. Select the correct Start date and time when daylight saving time starts at your local
time zone.
3. Select the correct End date and time when daylight saving time ends at your local
time zone.
4. Click SAVE .
3. 11. 3. Upgrade the Firmware
TP-Link is dedicated to improving and richening the product features, giving you a better
network experience. We will release the latest firmware at our official website, you can
download the latest firmware file from our website: www.tp-link.com and upgrade the
firmware to the latest version.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to Settings > Firmware Upgrade page and confirm the Hardware Version.
3. Go to www.tp-link.com. Download the latest firmware file for the extender.
Note: The upgraded firmware version must correspond to the hardware.
4. Click BROWSE to locate the downloaded new firmware file, and click UPGRAGE.
5. Wait a few minutes for the upgrading and rebooting.
Note:
1. Before upgrading the firmware, it’s better to back up your current settings.
2. During the upgrading process, do not turn off or reset the extender.
3. If the upgrade is interrupted, it’s possible your extender may stop working and its LEDs blink once a second. In
this case, please connect your computer to the extender via an Ethernet cable, and set your computer to static IP
192.168.0.X and subnet mask 255.255.255.0. Then visit http://192.168.0.254 to complete the upgrade.
3. 11. 4. Back Up and Restore Configuration Settings
The configuration settings are stored as a configuration file in the extender. You can
back up the configuration file to your computer for future use and restore the extender
to a previous settings from the backup file when needed. Moreover, if needed, you can
erase the current settings and reset the extender to the default factory settings.
28
Chapter 3 Conguring via Web Management Interface
To backup configuration settings:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to Settings > Backup & Restore page.
3. Click BACK UP to save a copy of the current settings to your local computer. A config.
bin file will be stored to your computer.
To restore configuration settings:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to Settings > Backup & Restore page.
3. Click BROWSE to locate the backup configuration file stored on your computer, and
click RESTORE. The configuration file is config.bin.
4. Wait a few minutes for the restoring and rebooting.
Note: During the restoring process, do not turn off or reset the extender.
To reset the extender to factory default settings:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to Settings > Factory Default Restore page.
3. Click FACTORY RESTORE to reset the extender.
4. Wait a few minutes for the resetting and rebooting.
Note:
1. During the resetting process, do not turn off the extender.
29
Chapter 3 Conguring via Web Management Interface
2. We strongly recommend you back up the current configuration settings before resetting the extender.
3. 11. 5. Change Login Password
Go to Settings > Change Login Password, and you can change the login password of
the extender.
Note:
1. The new password must be 6-32 characters long and not include any spacing.
3. 11. 6. System Log
When the extender does not work properly, you can save the system log and send it to
the technical support for troubleshooting.
Follow the steps below to save the system log:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the password you set for the extender.
2. Go to Settings > System Log.
3. Choose the type and level of the system log according to your need.
4. Click SAVE LOG to save the system log to local.
30
FCC STATEMENT
Product Name: AV1000 Gigabit Powerline ac Wi-Fi Extender
Model Number: TL-WPA7517
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1 ) This device may not cause harmful interference.
2 ) This device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
31
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to
only Mobile Configurations. The antennas used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above
has been shown to comply with the applicable technical standards, FCC part 15. There
is no unauthorized change is made in the equipment and the equipment is properly
maintained and operated.
Issue Date: 2020.9.29
32
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
OPERATING FREQUENCY(the maximum transmitted power)
2400 MHz -2483.5 MHz(20dBm)
5150 MHz -5250 MHz(23dBm)
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and
(EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/ce
National restrictions
Attention: This device may only be used indoors in all EU member states and EFTA
countries.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of
exposure of the general public to electromagnetic fields by way of health protection.
The device complies with RF specifications when the device used at 20 cm from your
body.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is subject
to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
33
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le
brouillage est susceptible d’en compromettre le fonctionnement.
Caution:
1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems;
Avertissement:
1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement
pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable
aux systèmes de satellites mobiles utilisant les mêmes canaux;
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec
un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
CAN ICES-6/NMB-6
Korea Warning Statements:
당해 무선설비는 운용중 전파혼신 가능성이 있음.
NCC Notice
NCC Notice
注意！
依據 低功率電波輻射性電機管理辦法
LP0002低功率射頻器材技術規範_章節3.8.2
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻
率、加大功率或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立
即停用，並改善至無干擾時方得繼續使用。
34
前述合法通信，指依電信管理法規定作業之無線電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
5.7.9.1應避免影響附近雷達系統之操作。
BSMI Notice
安全諮詢及注意事項
• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。
• 清潔本產品之前請先切斷電源。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮，請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開
口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置
中。
• 不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。
設備名稱：AV1000 Gigabit Powerline ac Wi-Fi Extender
Equipment name
型號（型式）：TL-WPA7517
Type designation (Type)
單元
Ｕnit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
PCB ○ ○ ○ ○ ○ ○
外殼 ○ ○ ○ ○ ○ ○
電源供應板 − ○ ○ ○ ○ ○
其他及其
配件 − ○ ○ ○ ○ ○
備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值
Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of
the restricted substance exceeds the reference percentage value of presence condition.
備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the
percentage of reference value of presence.
備考3.〝−〞係指該項限用物質為排除項目。
Note 3：The “−” indicates that the restricted substance corresponds to the exemption.
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність
вимогам нормативних документів та вимогам, що передбачені чинними
законодавчими актами України.
35
Safety Information
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• Plug the powerline devices directly into the wall outlets but not the power strips.
• Plug the powerline devices into the wall outlets with earthing connection.
Environment:
• Operating Temperature: 0°C ~ 40°C (32°F ~104°F)
• Alert to service person
CAUTION NEUTRAL FUSING
Please read and follow the above safety information when operating the device. We
cannot guarantee that no accidents or damage will occur due to improper use of the
device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Symbol Explanation
Class II equipment
AC voltage
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys a new electrical or electronic equipment.
Indoor use only
Protection earth
36
Warning electric shock
Fuse is used in neutral N