TP-Link UE300C User Manual
Displayed below is the user manual for UE300C by TP-Link which is a product in the Network Cards category. This manual has pages.
User Guide
Model No.UE300C, UE300, UE330, UE200
©2020 TP-Link 7106508740 REV4.0.0
ATTENTION
♦ When product has power button, the power button is one of the way to shut o the
product; when there is no power button, the only way to completely shut o power is
to disconnect the product or the power adapter from the power source.
♦ Don’t disassemble the product, or make repairs yourself. You run the risk of electric
shock and voiding the limited warranty. If you need service, please contact us.
♦ Keep the device away from water, re, humidity or hot environments.
Recycling
This product bears the selective sorting symbol for Waste electrical and electronic
equipment (WEEE).
This means that this product must be handled pursuant to European directive 2012/19/EU
in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer
when he buys a new electrical or electronic equipment.
For technical support, replacement services, the user guide and more
information, please visit https://www.tp-link.com/support, or simply scan
the QR code.
If you have any suggestions or needs for our product guides, you
are welcome to email techwriter@tp-link.com.cn.
To communicate with TP-Link users or engineers, please visit
https://community.tp-link.com to join TP-Link Community.
LED Indication
*
*
UE300C:
For Windows 7/8/8.1, Mac OS X 10.8 and older version, please download and install a
driver from our ocial website: www.tp-link.com, and search the model No.
UE300, UE330 and UE200:
For Windows 7/8/8.1, please click to install a driver if prompted to do so. For Windows 7,
please click CANCEL if prompted "The program might not
have installed correctly" after installation.
For Mac OS X 10.8 and older version, please download
and install a driver from our ocial website:
www.tp-link.com, and search the model No.
This adapter supports Plug and Play feature. Plug in and wait for seconds.
Then this adapter is ready to use.
Status IndicationLED (for UE330)
LED (for UE300C, UE300, UE200)
Green
Yellow The Ethernet cable is properly connected
White
White
White
Flashing
Flashing
On
On
On The adapter is properly connected and hub is ready to use
Network data is being transferred
Both the adapter and Ethernet cable are properly connected
Network data is being transferred
USB Port
wired network
RJ45 Port
computer
*use UE330 as illustration
BSMI Notice
安全諮詢及注意事項
♦ 請使用原裝電源供應器或只能按照本產品注明的
電源類型使用本產品。
♦
清潔本產品之前請先拔掉電源線。請勿使用液體、
噴霧清潔劑或濕布進行清潔。
♦
注意防潮，請勿將水或其他液體潑灑到本產品上。
♦ 插槽與開口供通風使用，以確保本產品的操作可
靠並防止過熱，請勿堵塞或覆蓋開口。
♦ 請勿將本產品置放於靠近熱源的地方。除非有正
常的通風，否則不可放在密閉位置中。
♦
請不要私自打開機殼，不要嘗試自行維修本產品，
請由授權的專業人士進行此項工作。
限用物質及其化學符號
鉛
Pb 鎘
Cd 汞
Hg 六價鉻
CrVI 多溴聯苯
PBB 多溴二苯醚
PBDE
產品元
件名稱
PCB
外殼
○ ○ ○ ○
○ ○ ○ ○ ○
○
○
備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 系指限用物
質之百分比含量超出百分比含量基準值。
備考2. "○"系指該項限用物質之百分比含量未超出百分
比含量基準值。
備考3. " — " 系指該項限用物質為排除項目。
限用物質含有情況標示聲明書
TP-Link hereby declares that the device is in
compliance with the essential requirements
and other relevant provisions of directives
2014/30/EU, 2014/35/EU, 2009/125/EC,
2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may
be found at https://www.tp-link.com/en/ce
FCC STATEMENT
This device complies with part 15
of the FCC Rules. Operation is
subject to the following two conditions:
1) This device may not cause harmful
interference.
2)
This device must accept any interference
received, including cause undesired
operation.
Any changes or modications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
CE Mark Warning
This is a class B product. In a
domestic environment, this
product may cause radio interference, in
which case the user may be required to
take adequate measures.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
○