TP-Link UH400 User Manual
Displayed below is the user manual for UH400 by TP-Link which is a product in the Interface Hubs category. This manual has pages.
Explanation of the symbols on the
product label
Class II equipment
AC voltage
DC voltage
Indoor use only
Energy eciency Marking
Recycling
This product bears the selective sorting
symbol for Waste electrical and electronic
equipment (WEEE). This means that this
product must be handled pursuant to
European directive 2012/19/EU in order to
be recycled or dismantled to minimize its
impact on the environment.
User has the choice to give his product to a
competent recycling organization or to the
retailer when he buys a new electrical or
electronic equipment.
ATTENTION
♦ Keep the hub away from water, re, humidity or hot environments.
♦ Do not heavily drop or impact the hub.
♦ Do not attempt to disassemble, modify or x the hub by yourself. You run the
risk of electric shock and voiding the limited warranty. If you need service,
please contact us.
♦ Disconnect the hub from the computer before cleaning it. Do not use liquid
cleaning method.
♦ This hub can be powered only by CE certied computers that comply with
Limited Power Source (LPS).
♦ The rated input current is 3.8A.
♦ TP-Link will not be held responsible for any damage to disk or hard disk data
caused by improper use.
COPYRIGHT & TRADEMARKS
♦ Specications are subject to change without notice. TP-Link is a registered
trademark of TP-Link Technologies Co., Ltd. Other brands and product names
are registered trademarks of their respective holders.
♦ No part of the specications may be reproduced in any form or by any means
or used to make any derivative such as translation, transformation, or adaptation
without permission from TP-Link Technologies Co., Ltd.
Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.
http://www.tp-link.com
User Guide
USB 3.0 4-Port Portable Hub
Model No. UH400
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
UkrSEPRO
Продукт сертифіковано згідно с
правилами системи УкрСЕПРО на
відповідність вимогам нормативних
документів та вимогам, що передбачені
чинними законодавчими актами України.
BSMI Notice 安全諮詢及注意事項
♦ 請使用原裝電源供應器或只能按照本產品注明的
電源類型使用本產品。
♦
清潔本產品之前請先拔掉電源線。請勿使用液體、
噴霧清潔劑或濕布進行清潔。
♦
注意防潮，請勿將水或其他液體潑灑到本產品上。
♦ 插槽與開口供通風使用，以確保本產品的操作可
靠並防止過熱，請勿堵塞或覆蓋開口。
♦ 請勿將本產品置放於靠近熱源的地方。除非有正
常的通風，否則不可放在密閉位置中。
♦
請不要私自打開機殼，不要嘗試自行維修本產品，
請由授權的專業人士進行此項工作。
Technical Support
Tel: +86 755 2650 4400
E-mail: support@tp-link.com
Web: http://www.tp-link.com/support
www.tp-link.com
Usage Tips: 1. The USB 3.0 ports are also compatible with USB 2.0 and
USB 1.1 specications.
2. The USB 3.0 ports transfer data at a rate up to 5Gbps, but
the actual rate is limited by the USB transfer rate of the
connected devices.
3. The performance of 2.4GHz wireless devices (
wireless
keyboards, mouses, etc.
) may be aected when they are
working too close to the USB 3.0 hub.
FCC & CE
FCC STATEMENT
This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions:
1) This device may not cause harmful
interference.
2) This device must accept any interference
received, including cause undesired
operation.
Any changes or modications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
CE Mark Warning
This is a class B product. In a domestic
environment, this product may cause
radio interference, in which case the
user may be required to take adequate measures.
Hardware Connection
Plug the USB cable into the computer’s USB port and the
hub is ready to use.
Usage Tips:
Using the Hub
This hub provides your computer with 4 additional USB 3.0
ports for super-speed USB 3.0 connections.
Smartphone USB Flash Disk Mobile Hard Disk USB Mouse
1. The TP-Link USB 3.0 hub is plug-and-play and requires no
driver for Windows, Mac OS X or Linux systems.
2. The LED will light upwhen the corresponding USB port is
connected to a USB device.
1910012401 REV3.0.0
Safety Information
♦ When product has power button, the
power button is one of the way to shut
o the product; when there is no power
button, the only way to completely shut
o power is to disconnect the product or
the power adapter from the power source.
♦ Don’t disassemble the product, or make
repairs yourself. You run the risk of electric
shock and voiding the limited warranty.
If you need service, please contact us.
♦ Avoid water and wet locations.