Vertiv 03.630.805.1 User Manual
Displayed below is the user manual for 03.630.805.1 by Vertiv which is a product in the Power Distribution Units (PDUs) category. This manual has pages.
Related Manuals
7
DI-STRIP®
Power Distribution Units
also for France, Switzerland, USA
7.1
SOCKET STRIPS
DOS00365
19’’
1 HU
= 44.45 mm
465 mm
483 mm
DOS00291
DOS00312
Socket Strips
DI-STRIP®
Strong points 7.3
DI-STRIP®
TriplePower 7.6
BladePower 7.8
PizzaPower 7.9
Classic 7.9
Compact 7.10
Protector 7.11
Cleaner 7.13
Safety Basic 7.14
Safety Standard 7.15
Master-Slave 7.16
Combi 7.17
GST18, 1-phase 7.18
GST18, 3-phase 7.19
DI-STRIP®
Euro Plug System 7.22
DI-STRIP®
For France 7.25
DI-STRIP®
For Switzerland 7.36
DI-STRIP®
USA 7.39
Remote PDU 7.40
Note
You will find more information on DI-STRIP®
at: www.knuerr-distrip.com
DOS00721
DOS00318
DOS00317
SOCKET STRIPS
7.2
DOS00317
DI-STRIP®
Strong points
Robust!
Plug field protected with raised
casing edges.
Stability
High stability and torisional
strength provided with closed
sheet steel casing.
Electrical safety
Full power to all connected con-
sumers with full-length brass
busbar.
Shock hazard-proof and low con-
tact resistance with double
spring contacts.
19” installation
Optimum use of space with 19”
installation:
- With low height, 1 HU
(44.45 mm)
- With 45° positioning of the
sockets
International compatibility
Numerous standard products in
accordance with international
standards. Special models on re-
quest.
Flexibility
Plenty of room for movement
with 2.5 m power supply cable.
Flexibility provided by standard
plug with dual earthing system.
3
1
6
5
4
2
Aesthetics
Appealing design with extruded
casing and design side panels in
visible area.
Cost-conscious
Quick and easy mounting on the
rack extrusion.
Universal
1 and 3-phase systems.
Modularity
Socket strip modules can be eas-
ily combined using plug-in con-
nections.
Plug-in
Proven GST18 plug-in system for
connecting socket strip modules.
Certifications
Worldwide approvals and
certifi-
cations are a quality feature.
12
11
10
9
8
7
DOS00366
DOS20134
DOS20144
DOS20131
DOS20142
DOS20134
7.3
SOCKET STRIPS
SOCKET STRIPS
7.4
DOS20155a
DI-STRIP®Classic
- Socket spacing: 100 mm
- With/without switch
DI-STRIP®Compact
- Socket spacing: 50 mm
- With/without switch
DI-STRIP®Protector
- User protection (FI)
- Circuit breaker (LS)
- User protection and circuit breaker (FI/LS)
- Equipment protection (BladePower/PizzaPower)
DI-STRIP®Protector Emergency STOP
- User protection / circuit breaker (FI/LS)
- With emergency stop switch
DI-STRIP®Power Cleaner
- Mains filter (MF)
DI-STRIP®Safety Basic
DI-STRIP®Safety Standard
- Overvoltage protection
DI-STRIP®Master Slave
- Automatic consumer switching
DI-STRIP®Combi
- Automatic consumer switching with overvoltage
protection and mains filter
DI-STRIP®GST18
Compact/Master Slave/Safety Basic/Safety Standard/IEC320
- Without cable for GST18 plug-in system (Wieland)
GST18 accessories
Remote PDU
DOS00402
DOS00401
DOS00399
DOS00679 DOS20112
DOS00394
DOS00457
19’’
19’’
19’’
19’’
19’’
19’’
19’’
19’’
DOS00455
DOS00400 DOS20108
DOS00397 DOS20110
DOS00396
19’’
19’’
Euro Plug
System
Page 7.22
Page 7.8
Page 7.19
Page 7.19
Page 7.19
Page 7.41
Standard DIN 49 440
Page 7.9 / Page 7.41 / Page 7.42
Page 7.10 / Page 7.41
Page 7.11
Page 7.12
Page 7.13
Page 7.14
Page 7.16
Page 7.17
Page 7.18
Page 7.20
DOS80001
7.5
SOCKET STRIPS
DOS20153a
DOS00402 DOS00717 DOS00685
DOS00399
DOS00463
DOS20103
DOS00401 DOS20074 DOS00686 DOS20121
19’’
19’’
19’’
19’’
19’’ 19’’ 19’’
DOS20065 DOS00719
DOS20059
DOS00400
DOS00397 DOS00720 DOS00687
DOS00464
19’’ 19’’ 19’’ 19’’
UTE Standard
Page 7.25
Page 7.26
Page 7.27
Page 7.28
Page 7.29
Page 7.30
Page 7.32
Page 7.33
Page 7.34
Swiss Standard
Page 7.36
Page 7.37
Page 7.38
Page 7.38
USA Standard
Page 7.39
Page 7.39
Page 7.40
Three-Phase
System
Page 7.7
Page 7.8
Page 7.20
SOCKET STRIPS
7.6
TriplePower®
New: Three Phase DI-STRIP®
TriplePower®
The TriplePower ®name reflects the performance of our lat-
est development. The DI-STRIP®TriplePower®supplies
net-
work racks with three times the normal power. This
requirement is generated by the increasingly greater pack-
ing densities
and constantly rising energy requirements in
racks, which are often caused by aptly named “Blade
Servers” or 1 HU “Pizza Servers”, more than 40 of which
can be integrated into a Knürr Miracel rack.
The DI-STRIP®TriplePower®uses a classic 3-phase feed
with
3x16A, which it optimally distributes throughout the
whole rack. The 23 HU and 41 HU standard lengths cover
the entire rack height range of the Knürr Smaract2and
Miracel rack families.
DOS20149
DOS20148
At the maximum configura-
tion
level, up to 48 users
can
be connected to a
DI-
STRIP®TriplePower®
(Euro socket strip). Wit re-
dundant feed, 96A
can con-
sequently be provided in a
19” rack
with only
two DI-
STRIP®TriplePower®
.
Note
You will find more information on TriplePower®
at: www.triple-power.com
7.7
SOCKET STRIPS
Dimensions in mm:
L = Length, S = Switch, n = Number of sockets,
F1 = Standard side piece, F2 = Design side piece,
19” = Suitable for 19” installation, Safe = Child-safe
HU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DOS20126
DI-STRIP®TriplePower®Euro Plug-In System, IEC 320
With cable
- With 3-way Euro combinations of IEC 320
sockets in acc. with IEC 60320
- Cable: H05VV-F 5 G 2.5 mm2
- Cable: 2.5 m
(optional with IEC60309 plug, 3Ph/N/PE 6h)
- Easy mounting on the rack extrusion
- 3x16A feed as standard
- Ideal for implementing redundancies
(e.g. 96 A with redundant feed)
- Colour coding of the phase assignment
- Optimum distribution over the entire rack
height (23 HU and 41 HU)
- Alternative to 3-phase GST18 system
(see page 7.20)
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals/certificates
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Load rating
100-240/173-415 Vac
Input: 3x 16 A
Output: 10 A (NA 15 A)
Approval symbols for IEC 320 3-way Euro
combinations
VDE, UR, CSA
Supply schedule
1 socket strip
2 mounting brackets
DI-STRIP®TriplePower®
Strong points
DOS20131
1DOS20126
3
DOS20147
2DOS20129
4
Cost-conscious
Quick and easy mounting on the
rack extrusion.
Costs reduction with regard to
mounting and wiring.
Feed
- 3x16A as standard
- Ideal for implementing
redundancies (e.g. 96 A)
At a glance
Phase assignment colour coding
(L1, L2, L3).
Installation
Optimum distribution over the
entire rack height
(standard: 23 HU and 41 HU).
Technical alternatives
- For 3-phase GST18 system
(see page 7.19).
L S n F1 F2 19“ Safe Model Order no. UP
1033 24 •03.600.024.1 1 unit
1833 48 •03.600.048.1 1 unit
1033 24 •With plug 03.600.824.1 1 unit
1833 48 •With plug 03.600.848.1 1 unit
SOCKET STRIPS
7.8
BladePower®
PizzaPower®
New:Three Phase – DI-STRIP®
BladePower®
PizzaPower®
A new generation of the power distribution units of the
DI-
STRIP® range now ensures even more power: Blade-
Power®and PizzaPower®for fail-safe power
supply
distribution in network racks.
Increasingly greater packing densities and therefore con-
stantly increasing energy requirements in server racks
caused by blade servers or 1 HU pizza servers will now be
handled electrically.
Up to 35 kW dissipated heat can be removed from modern
CoolTherm®server racks. But how is the necessary power
supplied into the rack, which can cause such power
losses?
The PDUs (3x32 A) optimally distribute the required power
over the entire rack, with connection of up to 21 con-
sumers possible at the highest configuration level. 192 A
can be supplied to the rack with redundant feed.
Note
For more information on effective high density
power distribution see
: www.blade-power.com
DOS20153
DI-STRIP®BladePower®
Technical data
- EC 320 sockets (10 A and 16 A).
- Individually fused via thermal circuit breaker
that can be reset in acc. with IEC60934.
- Cable: H05VV-F 5 G 4 mm2
- Cable: 4 m
- With IEC60309 plug, 1Ph/N/PE 6h blue,
3Ph/N/PE 6h red
Material / Finish
Casing: sheet steel, zinc-plated,
powder-coated
Dimensions
Height: approx. 60 mm
Casing width: 84 mm
Colour
Casing: RAL 9005 black
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova GS
- CSA NRTL/C
Load rating
100-240/173-415 Vac
Input: 1x32 A or 3x32 A
Output: 10 A / 16 A
Supply schedule
1 socket strip (PDU)
2 mounting brackets
1 19” mounting bracket
(additional with 19 installation option)
Operating instructions
DI-STRIP®
Strong points
Cost-conscious
Quick and easy installation on the
server rack’s extrusion.
Costs reduction with regard to
mounting and wiring.
Feed
- Single-phase 32 A and
three-phase 32 A
- ≤22 kVA
- Ideal for implementing
redundancies (e.g. 192 A)
Crystal clear assignment
Unmistakeable phase assignment
colour-coding (L1, L2, L3).
Installation
Optimum distribution of blade cen-
ter
and pizza server supply with
simple power distribution unit
(PDU)
installation.
Availability
Prevention of “Single Point of
Failure” with individual fusing.
Certification
DOS20155
L S n F1 19“ Plug Model Order no. UP
375 5 ••• BladePower®PDU 1x 32 A 03.630.005.1 1 unit
740 15 ••BladePower®PDU 3x 32 A 03.630.015.1 1 unit
375 5 •• BladePower®PDU 1x 32 A 03.630.805.1 1 unit
740 15 •BladePower®PDU 3x 32 A 03.630.815.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.9
SOCKET STRIPS
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
DOS00260 With switch
Without switch
DOS00261
- Optionally with lit switch,
2-pole switching
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
- Optionally with Euro plug, IEC320
for UPS applications
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 100 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
DI-STRIP®Classic
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
1783 17 •03.300.067.x 1 unit
1383 13 •03.300.063.x 1 unit
983 9 •03.300.059.x 1 unit
583 5 •03.300.055.x 1 unit
1733 •16 •With switch 03.302.066.x 1 unit
1333 •12 •With switch 03.302.062.x 1 unit
933 •8•With switch 03.302.058.x 1 unit
533 •4•With switch 03.302.054.x 1 unit
DOS00403
DOS20158
DI-STRIP®PizzaPower®
Technical data
- IEC 320 sockets (10 A)
- Individually fused via thermal circuit breaker
that can be reset in acc. with IEC60934.
- Cable: H05VV-F 5 G 4 mm2
- Cable: 4 m
- With IEC60309 plug, 1Ph/N/PE 6h blue,
3Ph/N/PE 6h red
Material / Finish
Casing: sheet steel, zinc-plated,
powder-coated
Dimensions
Height: approx. 60 mm
Casing width: 84 mm
Height with cable: Approx. 176 mm
Colour
Casing: RAL 9005 black
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova GS
- CSA NRTL/C
Load rating
100-240/173-415 Vac
Input: 1x32 A or 3x32 A
Output: 10 A
Supply schedule
1 socket strip (PDU)
2 mounting brackets
1 19” mounting bracket
(additional with 19 installation option)
Operating instructions
DOS20159
Note
For more information on effective high density
power distribution see
: www.pizza-power.com
L S n F1 19“ Plug Model Order no. UP
400 7 ••• PizzaPower®PDU 1x 32 A 03.631.007.1 1 unit
933 21 ••PizzaPower®PDU 3x 32 A 03.631.021.1 1 unit
400 7 •• PizzaPower®PDU 1x 32 A 03.631.807.1 1 unit
933 21 •PizzaPower®PDU 3x 32 A 03.631.821.1 1 unit
SOCKET STRIPS
7.10
DOS20021 With switch
With switch
With switch
Without switch
Without switch
DOS00401
DOS00263
DOS20020
DOS00262
- Optionally with lit switch, 2-pole switching
- 19” installation option (with length 483 mm)
- 2 versions: Standard side panel or Design
side panel
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
- Optionally with Euro plug, IEC320
for UPS applications
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Compact
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
883 15 •03.300.015.x 1 unit
732 11 •03.300.111.x 1 unit
683 11 •03.300.011.x 1 unit
532 7 •• 03.301.107.x 1 unit
532 7 •03.300.107.x 1 unit
483 7 •• 03.300.007.x 1 unit
483 8 •• 03.300.008.1 1 unit
382 4 •• 03.301.104.x 1 unit
382 4 •03.300.104.x 1 unit
333 4 •03.300.004.x 1 unit
883 •14 •With switch 03.302.014.x 1 unit
732 •10 •With switch 03.302.110.x 1 unit
683 •10 •With switch 03.302.010.x 1 unit
532 •6•• With switch 03.303.106.x 1 unit
532 •6•With switch 03.302.106.x 1 unit
483 •6•• With switch 03.302.006.x 1 unit
483 7 •• With switch 03.302.007.1 1 unit
382 •3•• With switch 03.303.103.x 1 unit
382 •3•With switch 03.302.103.x 1 unit
333 •3•With switch 03.302.003.x 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.11
SOCKET STRIPS
DOS00692
Protector FI
RCCB for user protection
- Protection with indirect contact as error
protection by switching off with inadmis-
sible high contact voltage through con-
tact with electrical equipment
- Protection with direct contact as
back-up protection
- Residual operating current Ig = 10mA for
alternating and intermittent fault direct
current
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20065 With fault current circuit
breaker
With fault current circuit
breaker
With circuit breaker
DOS00264 With circuit breaker
DOS00264
DI-STRIP®Protector FI
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
883 13 •03.304.013.1 1 unit
683 9 •03.304.009.1 1 unit
483 5 •• 03.304.005.1 1 unit
Protector circuit breaker
- Circuit breaker for overload and short
circuit
- Protects cables and feeds with rapid
switching off with short circuit and de-
fined delayed cutoff with overload
- Circuit breaker: 16 A
- Tripping characteristic
type B, 2-pole
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Protector LS
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
883 13 •03.308.013.1 1 unit
683 9 •03.308.009.1 1 unit
483 5 •• 03.308.005.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.12
DOS00693
DOS00264
DOS20059
DOS00486
Classic with
emergency stop switch
DOS00487
Protector with
emergency stop switch
Protector FI / LS
- RCCB and circuit breaker
- Provides a combination of user, overload
and short circuit protection
- Residual operating current Ig = 30 mA
for alternating and intermittent fault
direct current
- Circuit breaker 16 A
- Tripping characteristic
type B, 2-pole
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length bus bar,
brass
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Protector FI / LS
Standard DIN 49 440
- With 2-pole emergency stop switch for user
protection
- For protecting operating personnel
- For manual emergency switch-off
of connected equipment
- Phase and neutral conductors are safely
separated
- Switch must be specifically unlocked to
restart
- 19” installation option
(with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length bus bar,
brass
Dimensions
Socket spacing: Classic: 100 mm,
Compact: 50 mm
Height: 101 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combinations
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Protector Emergency STOP
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
883 13 •03.310.013.1 1 unit
683 9 •03.310.009.1 1 unit
483 5 •• 03.310.005.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
683 10 •Compact 03.326.010.1 1 unit
483 6 •• Compact 03.326.006.1 1 unit
1333 12 •Classic 03.326.062.1 1 unit
933 8 •Classic 03.326.058.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.13
SOCKET STRIPS
DOS00456
DOS00488
DOS20061
DOS00266
- With 2-pole emergency stop switch for user
protection
- For protecting operating personnel
- For manual emergency switch-off
of connected equipment
- Phase and neutral conductors are safely
separated
- Switch must be specifically unlocked to
restart
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing:
Compact: 50 mm
Height: 101 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combinations
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Additional:
With 2-pole fault current switch and cir-
cuit breaker
Provides a combination of user, overload
and short circuit protection
Load rating
100-240Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
DI-STRIP®Protector Emergency Stop FI / LS
Standard DIN 49 440
-
High-frequency glitches are generally caused
by
switching processes in an operation from
100 kHz to 5MHz. This high-frequency rate
overloads the mains frequency and affects
ad-
jacent electronic equipment.
The mains filter
attenuates this high-frequency
rate.
-
The attenuation behaviour is harmonized with
the
typical interference spectrum.
- The mains filter works in both directions.
This means that glitches from the equip-
ment to the socket strips are therefore also
kept away from the mains.
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Technical data
Nominal voltage: max. 250 Vac, 50 Hz
Nominal current: max. 16 A
Filter in acc. with VDE 0565-3
(EN 60939-1)
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Power Cleaner
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
683 8 •03.328.008.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
883 13 •03.312.013.x 1 unit
683 9 •03.312.009.x 1 unit
483 5 •• 03.312.005.x 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.14
DOS00306
DOS20068
DOS00270
With overvoltage protection
With overvoltage protection
With overvoltage protection
-
For protecting against transient overvoltages
from the mains, which, for example, are
caused
by switching machines on and off.
- With critical overvoltages the mains is
separated.
- Once the safety arrester has been triggered
the green function display goes out. The
socket strip
can then no longer be used.
Send the socket strip to the manufacturer for
the safety arrester to be replaced!
The safety effect of the type 3 test category
and requirements category “D” is to protect
the equipment, i.e. precision protection.
The protection devices of the test and re-
quirements
categories 1 and 2 and B and C
must be preconnected
in the building instal-
lation to ensure optimum protection.
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Technical data
Test category: Type 3
- In acc. with DIN EN 61643-11
Feature class: D
- In acc. with VDE 0675-6
Mains voltage: 230 VAC
Nominal current: max. 16 A
Cut-off discharge current (8/20 ?s): 10 kA
Reaction time: ‹ 25 ns
Protection level
(with 100 A varistor peak current):
- L with respect to N: ‹ 800 V
- L/N with respect to PE: ‹ 1500 V
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Safety Basic
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
732 10 •03.316.110.1 1 unit
683 10 •03.316.010.x 1 unit
532 6 •• 03.317.106.1 1 unit
532 6 •03.316.106.1 1 unit
483 6 •• 03.316.006.x 1 unit
432 4 •• 03.317.104.1 1 unit
432 4 •03.316.104.1 1 unit
383 4 •03.316.004.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.15
SOCKET STRIPS
DOS20069
DOS00307
DOS00271
With overvoltage protection
and mains filter
With overvoltage protection
and mains filter
- The “Safety Standard” models consist of a
combined overvoltage protection/mains
filter element.
-
For protecting against transient overvoltages
from the mains, which, for example, are
caused
by switching machines on and off.
- With critical overvoltages the mains is
separated.
- Once the safety arrester has been triggered
the green function display goes out. The socket
strip can then no longer be used. Send the
socket strip to the manufacturer for the safety
arrester to be replaced!
-
The safety effect of the type 3 test category
and requirements category “D” is to protect
the equipment, i.e. precision protection.
The protection devices of the test and re-
quirements categories 1 and 2 and B and C
must be preconnected in the building instal-
lation to ensure optimum protection.
- High-frequency glitches are generally
caused by switching processes in an operation
from 100 kHz to 5MHz.
- This high-frequency rate overloads the
mains frequency and affects adjacent elec-
tronic equipment. The mains filter attenu-
ates this high-frequency rate.
-
The attenuation behaviour is harmonized with
the
typical interference spectrum.
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Technical data
Mains voltage: 230 VAC
Nominal current: max. 16 A
Cut-off discharge current (8/20 ?s): 10 kA
Reaction time: ‹ 25 ns
Protection level
(with 100 A varistor peak current):
- L with respect to N: ‹ 800 V
- L/N with respect to PE: ‹ 1500 V
Overvoltage protection
- Test category: Type 3
in acc. with DIN EN61643-11
- Feature class: D
- In acc. with VDE 0675-6
Mains filter
- In acc. with VDE 0565 (EN 60939)
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Safety Standard
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
883 •13 •With switch 03.318.013.x 1 unit
732 •9•• With switch 03.319.109.x 1 unit
732 •9•With switch 03.318.109.x 1 unit
683 •9•With switch 03.318.009.x 1 unit
532 •5•• With switch 03.319.105.x 1 unit
532 •5•With switch 03.318.105.x 1 unit
483 •5•• With switch 03.318.005.x 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.16
DOS20070
DOS00268
With master-slave module
With master-slave module
- If the master equipment is switched, the
slave sockets are also switched (together,
with a short delay to the master). Enables
easy switching on and off of several difficult
to access pieces of equipment. Switching
thresholds can be set from outside via po-
tentiometer.
- Note:
- Power consumption of the master equip-
ment must be constantly over the switch-
ing-on threshold. When switching off the
master equipment, the power consumption
must fall below the switching-off thresh-
old.
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: HO5VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number 1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
Max. 250 Vac/16 A
Technical data
Threshold setting range
On: 20 mA - 200 mA (approx. 55 mA, sup-
ply status)
Off: 16 mA - 160 mA (approx. 44 mA, sup-
ply status)
Switching delay 550 ms ±/-20 %
Electronic module, 2-pole switching
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Master-Slave
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
683 9 •03.314.009.1 1 unit
483 5 •• 03.314.005.1 1 unit
See also: The current
Telecom Special Catalogue!
Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.17
SOCKET STRIPS
- Master-slave with overvoltage protection
and mains filter
- Automatic consumer switching
- Combines functions of the Master-Slave
(page 7.16) and the Safety Standard
(page 7.15)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Technical data
Overvoltage protection and mains filter:
Mains voltage: max. 250 Vac
Nominal current 16A
Feature class: D (refined protection in ac-
cordance with DIN VDE 0675)
Surge current resistance (8/20 μs wave):
max. 10 kA
Protection level (1.5/50 μs wave): ‹ 1500 V
(L/N against PE)
Master-slave function:
Threshold setting range
On: 20 mA - 200 mA (approx. 55 mA, sup-
ply status)
Off: 16 mA - 160 mA (approx. 44 mA, sup-
ply status)
Switching delay 550 ms ±/- 20 %
Electronic module, 2-pole switching
Supply schedule
1 socket strip
2 mounting brackets
DOS00273
DOS00325
DOS00272
With master-slave
overvoltage protection
and mains filter
With master-slave
overvoltage protection
and mains filter
DI-STRIP®Combi
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
782 9 •03.320.109.1 1 unit
733 9 •03.320.009.1 1 unit
582 5 •• 03.321.105.1 1 unit
582 5 •03.320.105.1 1 unit
533 5 •03.320.005.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.18
DOS20060
DOS00663
DOS20045
DOS20046
With switch
Without switch
DOS20072
- Quick and efficient plug connection system
- Plug-in electro-installation in place of con-
ventional wiring
- Speed:
- Due to simple plugging together of precon-
figured elements
- Flexibility:
- Due to cable (cable length)
- Efficient:
- Easy exchange of socket strips, without ca-
bling expenses
- Safety:
- Due to plug system, all faulty installations
are excluded
- Space-saving:
- Use of protection and switching functions
can be extended to additional socket strips
with no loss of plugging space by extending
cable (maximum load rating of 16 A)
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
DI-STRIP®GST18 Plug System (Wieland) Compact
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
583 •6•With switch 03.302.206.1 1 unit
433 •3•With switch 03.302.203.1 1 unit
533 7 •03.300.207.1 1 unit
383 4 •03.300.204.1 1 unit
- With overvoltage protection
- Technical description, see page 7.14
DI-STRIP®Safety Basic
With GST18 plug system
DOS00464
- Technical description, see page 7.16
DI-STRIP®Master-Slave
With GST18 plug system
DOS20073
- With overvoltage protection, with integrated
mains filter and lit switch
- Technical description, see page 7.15
DI-STRIP®Safety Standard
With GST18 plug system
L S n F1 F2 19” Safe Model Order no. UP
433 4 03.316.204.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
583 5 03.318.205.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
533 5 03.314.205.1 1 unit
7.19
SOCKET STRIPS
DOS20110
- With overvoltage protection
- Technical description, see page 7.14
DI-STRIP®Safety Basic Euro Socket System IEC 320
With GST18 plug system
DOS20108
- Technical description, see page 7.13
DI-STRIP®Power Cleaner
With GST18 plug system
DOS20109
- With overvoltage protection with integrated
mains filter
- Technical description, see page 7.15
DI-STRIP®Safety Standard
With GST18 plug system
L S n F1 F2 19” Safe Model Order no. UP
483 03.616.206.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
483 6 03.618.206.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
483 6 03.612.206.1 1 unit
DI-STRIP®Euro Socket System, IEC 320
With GST18 plug system
- With 3-way Euro combinations of IEC 320
sockets
- Without fuse protection
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Load rating
100-240 Vac/10 A
Approval symbols for IEC 320 3-way Euro
combinations
VDE, UR, CSA
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20112
DOS20107 Input
Output for
further cabling
DOS20106
L S n F1 F2 19” Safe Model Order no. UP
383 6 •03.600.206.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.20
Requirement
Constantly increasing energy re-
quirements in the rack caused by
high packing densities (e.g. 1 HU
Pizza Servers, Blade Servers,
etc.)
Solution
3-phase distributor with GST18
plug system, e.g. 96 A and more
with redundant feed
Advantages
- Modularity
- Plug-in capability
(no wiring required)
- Expandability
- Cascadability
- Easy implementation of redun-
dancies / UPS secured circuits
- Mix of, for example, DIN pro-
tected contacts /
IEC 320 Euro systems
- Installation position freely
selectable
- Good alternatives to 3-phase
DI-STRIP Triple Power
(see page 7.6)
3
2
1
- GST 18 socket for connecting GST18i5 dis-
tributor block with 3 phases
- 5-pole (L1, L2, L3, N, PE) 250/400 V ~
- Cable: HO5VV-F 5G 2.5 mm2
Colour
Black
Power Supply Cable, 3-Phase
Accessories for GST 18 plug system
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.048.0 1 unit
DOS20104
DOS20103
- For individual, customer-side connection
- Modular plug-in connection
- Distribution of 3 phases on various sockets
- Including mounting panel
Colour
Black
GST18i5 Distributor Block, 3-Phase
L S n F1 F2 19” Safe Model Order no. UP
04.000.038.9 1 unit
3-phase in rack with GST18
Strong points
DOS20147 DOS20132
DOS20142 DOS20135
7.21
SOCKET STRIPS
- GST 18 plug
- GST 18 socket
- Cable, H05VV-F 3G 1.5 mm2
Colour
For colour coding circuits (e.g. UPS)
Connection Cable
Accessories for GST 18 plug system
L S n F1 F2 19” Safe Model Order no. UP
200 White 04.000.042.0 1 unit
200 Black 04.000.042.9 1 uni
500 White 04.000.037.0 1 unit
500 Black 04.000.037.9 1 unit
1000 White 04.000.044.0 1 unit
1000 Black 04.000.044.9 1 unit
5000 White 04.000.045.0 1 unit
DOS00469
- With screw terminal for cross-section
1.5-2.5 mm2with cable strain relief
- For individual, customer-side additional
cabling
Colour
White
GST18 Plug Part
L S n F1 F2 19” Safe Model Order no. UP
04.000.047.0 1 unit
DOS00470
- Mains plug CEE/VII - GST18 socket (Wieland)
- Cable, H05VV-F 3G 1.5 mm2
Colour
White
Power Supply Cable, 1-Phase
Accessories for GST 18 plug system
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.040.0 1 unit
5000 04.000.041.0 1 unit
DOS00467
- With screw terminal for cross-section
1.5-2.5 mm2with cable strain relief
- For individual, customer-side connection
Colour
White
GST18 Socket Part
L S n F1 F2 19” Safe Model Order no. UP
04.000.046.0 1 unit
DOS00471
DOS20105
SOCKET STRIPS
7.22
DI-STRIP®Euro Socket System, IEC 320
With cable and right angle plug
- Optionally with lit switch, 2-pole switching
- 19” installation option
- With 3-way Euro combinations of IEC 320
sockets
- Cable: H05VV-F 3G 1.5 mm2
- Cable: 2.5 m
- Moulded right angle plug, CEE7/VII
- Without fuse protection
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Load rating
250 VAC/10 A
Approval symbols for IEC 320 3-way Euro
combinations
VDE, UR, CSA
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Euro Socket System, IEC 320
Euro input in the plug field
- With fine-wire fuse 10A
- Optionally with lit switch, 2-pole switching
- 19” installation option
- With 3-way Euro combinations of IEC 320
sockets
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Load rating
100-240 Vac
Input: max. 10 A
Output: max. 10 A
Approval symbols for IEC 320 3-way Euro
combinations
VDE, UR, CSA
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20062
DOS00498
DOS20042
DOS00458
DOS20041
DOS20040
With switch
Without switch
L S n F1 F2 19” Safe Model Order no. UP
483 •9•• With switch 03.602.009.1 1 unit
333 6 •03.600.006.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
383 6 •03.622.006.1 1 unit
483 9 •• 03.622.009.1 1 unit
433 •6•With switch 03.624.006.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.23
SOCKET STRIPS
DI-STRIP®Euro Socket System, IEC 320
Euro input on the side panel
- With fine-wire fuse 10A
- Optionally with lit switch, 2-pole switching
- 19” installation option
- With 3-way Euro combinations of IEC 320
sockets
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Load rating
100-240 Vac
Input: max. 10 A
Output: max. 10 A
Approval symbols for IEC 320 3-way Euro
combinations
VDE, UR, CSA
Supply schedule
1 socket strip
2 mounting brackets
DOS00460
DOS00461
DOS20044
DOS20043
Without switch
With switch
L S n F1 F2 19” Safe Model Order no. UP
333 6 •03.622.706.1 1 unit
433 9 •03.622.709.1 1 unit
383 •6•With switch 03.624.706.1 1 unit
483 •9•With switch 03.624.709.1 1 unit
DI-STRIP®Euro Socket System, IEC 320
With cable and right angle plug
- With thermal overload protection, 10 A (can
be reset)
- With lit switch,
1-pole switching
- 19” installation option
- With 2 5-way Euro combinations of IEC 320
sockets
- Cable: H05VV-F 3G 2.5 mm2
- Cable: approx. 5 m
- Moulded right angle plug, CEE7/VII,
optional blue 16 A-6h (2P+PE) CEE17 plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Load rating
250 Vac/10 A
Approval symbols for IEC 320, 5-way
Euro combinations
UR, CSA, VDE
Supply schedule
1 Socket strip
2 Mounting brackets
2 19” Mounting brackets
DOS20102
L S n F1 F2 19” Safe Model Order no. UP
483 •10 •• With switch 03.632.010.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.24
Mains Cable for Euro Socket Strip
For DIN 49 440 and French/Belgian standard
- Mains plug CEE/VII - Euro socket
IEC 320
- Cable: HO5VV-F 3G 1 mm2
Mains voltage
250 VAC
Nominal current
10 A
Mains Cable for Euro Socket Strip
For Swiss standard
- Mains plug: Type12 - Euro socket IEC 320
- Cable: HO5VV-F 3G 1 mm2
Mains voltage
250 VAC
Nominal current
10 A
DOS00076
DOS00077
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.054.9 1 unit
6000 04.000.053.9 1 unit
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.055.9 1 unit
DOS00078
DOS00519
Mains Cable for Euro Socket Strip
For British standard
- Mains plug: type BS 1363 - Euro socket
IEC320
- Cable: HO5VV-F 3G 1 mm2
Mains voltage
250 VAC
Nominal current
10 A
Euro Connection Cable
- Mains plug: IEC 320 - Euro socket IEC 320
- Cable: HO5VV-F 3G 1 mm2
- USA: SJT AWG18 with USA approval
Mains voltage
250 VAC
Nominal current
10 A
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.056.9 1 unit
L S n F1 F2 19” Safe Model Order no. UP
900 EU 04.000.051.9 1 unit
900 USA 04.000.052.9 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.25
SOCKET STRIPS
- Optionally with lit switch, 2-pole switching
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 100 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
DOS20018
DOS20019
DI-STRIP®Classic
Standard CEE 7 V (UTE) / France
L S n F1 F2 19” Safe Model Order no. UP
1783 17 •• 03.400.067.x 1 unit
1383 13 •• 03.400.063.x 1 unit
983 9 •• 03.400.059.x 1 unit
583 5 •• 03.400.055.x 1 unit
1733 •16 ••
With switch 03.402.066.x 1 unit
1333 •12 ••
With switch 03.402.062.x 1 unit
933 •8••
With switch 03.402.058.x 1 unit
533 •4••
With switch 03.402.054.x 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.26
DOS20025
DOS20023
DOS20024
DOS20022
With switch
With switch
Without switch
Without switch
- Optionally with lit switch, 2-pole switching
- 19” installation option
(with length 483 mm)
- 2 versions: Standard side panel or Design
side panel
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Compact
Standard CEE 7 V (UTE) / France
L S n F1 F2 19” Safe Model Order no. UP
883 15 •• 03.400.015.x 1 unit
732 11 •• 03.400.111.x 1 unit
683 11 •• 03.400.011.x 1 unit
532 7 •• 03.400.107.x 1 unit
483 7 ••• 03.400.007.x 1 unit
382 4 •• 03.400.104.x 1 unit
333 4 •• 03.400.004.x 1 unit
883 •14 ••
With switch 03.402.014.x 1 unit
732 •10 •• With switch 03.402.110.x 1 unit
683 •10 ••
With switch 03.402.010.x 1 unit
532 •6•• With switch 03.402.106.x 1 unit
483 •6••• With switch 03.402.006.x 1 unit
382 •3•• With switch 03.402.103.x 1 unit
333 •3••
With switch 03.402.003.x 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.27
SOCKET STRIPS
DI-STRIP®Protector FI
Standard CEE 7 V (UTE) / France
Protector FI
RCCB for user protection
- Protection with indirect contact as error
protection by switching off with inadmis-
sible high contact voltage through con-
tact with electrical equipment
- Protection with direct contact as
back-up protection
- Residual operating current Ig = 10mA for
alternating and intermittent fault direct
current
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Protector LS
Standard CEE 7 V (UTE) / France
Protector circuit breaker
- Circuit breaker for overload and short
circuit
- Protects cables and feeds with rapid
switching off with short circuit and de-
fined delayed cutoff with overload
- Circuit breaker: 16 A
- Tripping characteristic
type B, 2-pole
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20026
DOS20026
L S n F1 F2 19” Safe Model Order no. UP
883 13 •❖03.404.013.1 1 unit
683 9 •• 03.404.009.1 1 unit
483 5 ••• 03.404.005.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
883 13 •• 03.408.013.1 1 unit
683 9 •• 03.408.009.1 1 unit
483 5 ••• 03.408.005.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.28
DI-STRIP®Protector FI / LS
Standard CEE 7 V (UTE) / France
Protector FI / LS
- RCCB and circuit breaker
- Provides a combination of user, overload
and short circuit protection
- Residual operating current Ig = 30 mA
for alternating and intermittent fault
direct current
- Circuit breaker 16 A
- Tripping characteristic
type B, 2-pole
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Protector Emergency STOP
Standard CEE 7 V (UTE) / France
- With 2-pole emergency stop switch for user
protection
- For protecting operating personnel
- For manual emergency switch-off
of connected equipment
- Phase and neutral conductors are safely
separated
- Switch must be specifically unlocked to
restart
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: Classic: 100 mm, Com-
pact: 50 mm
Height: 101 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combinations
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS 20026
DOS20027
DOS20028
Classic with
emergency stop
switch
Compact with
emergency stop
switch
L S n F1 F2 19” Safe Model Order no. UP
883 13 •• 03.410.013.1 1 unit
683 9 •• 03.410.009.1 1 unit
483 5 ••• 03.410.005.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
683 10 ••
Compact 03.426.010.1 1 unit
483 6 ••• Compact 03.426.006.1 1 unit
1333 12 ••
Classic 03.426.062.1 1 unit
933 8 ••
Classic 03.426.058.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.29
SOCKET STRIPS
DI-STRIP®Protector Emergency Stop FI / LS
Standard CEE 7 V (UTE) / France
- With 2-pole emergency stop switch for user
protection
- For protecting operating personnel
- For manual emergency switch-off
of connected equipment
- Phase and neutral conductors are safely
separated
- Switch must be specifically unlocked to
restart
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing:
Compact: 50 mm
Height: 101 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combinations
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Additional:
With 2-pole fault current switch and cir-
cuit breaker
Provides a combination of user, overload
and short circuit protection
Load rating
100-240Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
DI-STRIP®Power Cleaner
Standard CEE 7 V (UTE) / France
-
High-frequency glitches are generally caused
by
switching processes in an operation from
100 kHz to 5MHz. This high-frequency rate
overloads the mains frequency and affects
ad-
jacent electronic equipment.
The mains filter
attenuates this high-frequency
rate.
-
The attenuation behaviour is harmonized with
the
typical interference spectrum.
- The mains filter works in both directions.
This means that glitches from the equip-
ment to the socket strips are therefore also
kept away from the mains.
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number 0.6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
Nominal voltage: max. 250 Vac, 50 Hz
Nominal current: max. 16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20029
DOS20030
With emergency Off switch
and FI-/ LS circuit breaker
With mains filter
L S n F1 F2 19” Safe Model Order no. UP
683 8 •• 03.428.008.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
883 13 •• 03.412.013.x 1 unit
683 9 •• 03.412.009.x 1 unit
483 5 ••• 03.412.005.x 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.30
DI-STRIP®Safety Basic
Standard CEE 7 V (UTE) / France
- For protecting against transient overvoltages
from the mains, which, for example, are
caused by switching machines on and off.
- With critical overvoltages the mains is sepa-
rated.
- Once the safety arrester has been triggered
the green function display goes out. The
socket strip can then no longer be used.
Send the socket strip to the manufacturer
for the safety arrester to be replaced!
The safety effect of the type 3 test category
and requirements category “D” is to protect
the equipment, i.e. precision protection.
The protection devices of the test and require-
ments categories 1 and 2 and B and C must be
preconnected in the building installation to
ensure optimum protection.
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour
Final digit of order number .1:
RAL 7035 light-grey
Technical data
Test category: Type 3
- In acc. with DIN EN 61643-11
Feature class: D
- In acc. with VDE 0675-6
Mains voltage: 230 VAC
Nominal current: max. 16 A
Cut-off discharge current (8/20 ?s): 10 kA
Reaction time: ‹ 25 ns
Protection level
(with 100 A varistor peak current):
- L with respect to N: ‹ 800 V
- L/N with respect to PE: ‹ 1500 V
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20032
DOS20031
L S n F1 F2 19” Safe Model Order no. UP
732 10 •• 03.416.110.1 1 unit
683 10 •• 03.416.010.1 1 unit
532 6 •• 03.416.106.1 1 unit
483 6 ••• 03.416.006.1 1 unit
432 4 •• 03.416.104.1 1 unit
383 4 •• 03.416.004.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.31
SOCKET STRIPS
DI-STRIP®Safety Standard
Standard CEE 7 V (UTE) / France
- The “Safety Standard” models consist of a
combined overvoltage protection/filter ele-
ment.
-
For protecting against transient overvoltages
from the mains, which, for example, are
caused
by switching machines on and off.
- With critical overvoltages the mains is
separated.
- Once the safety arrester has been triggered
the green function display goes out. The socket
strip can then no longer be used. Send the
socket strip to the manufacturer for the safety
arrester to be replaced!
-
The safety effect of the type 3 test category
and requirements category “D” is to protect
the equipment, i.e. precision protection.
The protection devices of the test and re-
quirements categories 1 and 2 and B and C
must be preconnected in the building instal-
lation to ensure optimum protection.
- High-frequency glitches are generally
caused by switching processes in an operation
from 100 kHz to 5MHz.
- This high-frequency rate overloads the
mains frequency and affects adjacent elec-
tronic equipment. The mains filter attenu-
ates this high-frequency rate.
-
The attenuation behaviour is harmonized with
the
typical interference spectrum.
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Technical data
Mains voltage: 230 VAC
Nominal current: max. 16 A
Cut-off discharge current (8/20 μs): 10 kA
Reaction time: ‹ 25 ns
Protection level
(with 100 A varistor peak current):
- L with respect to N: ‹ 800 V
- L/N with respect to PE: ‹ 1500 V
Overvoltage protection
Feature class: D
- In acc. with VDE 0675-6
Mains filter
- In acc. with VDE 0565 (EN 60939)
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20034
DOS20033 With overvoltage protection
and mains filter
With overvoltage protection
and mains filter
L S n F1 F2 19” Safe Model Order no. UP
883 •13 ••
With switch 03.418.013.x 1 unit
732 •9•• With switch 03.418.109.x 1 unit
683 •9••
With switch 03.418.009.x 1 unit
532 •5•• With switch 03.418.105.x 1 unit
483 •5••• With switch 03.418.005.x 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.32
DI-STRIP®Master-Slave
Standard CEE 7 V (UTE) / France
- If the master equipment is switched, the
slave sockets are also switched (together,
with a short delay to the master). Enables
easy switching on and off of several difficult
to access pieces of equipment. Switching
thresholds can be set from outside via po-
tentiometer.
- Note:
- Power consumption of the master equip-
ment must be constantly over the switch-
ing-on threshold. When switching off the
master equipment, the power consumption
must fall below the switching-off thresh-
old.
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: HO5VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number 1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
Max. 250 Vac/16 A
Technical data
Threshold setting range
On: 20 mA - 200 mA (approx. 55 mA, sup-
ply status)
Off: 16 mA - 160 mA (approx. 44 mA, sup-
ply status)
Switching delay 550 ms ±/-20 %
Electronic module, 2-pole switching
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20035 With master-slave module
L S n F1 F2 19” Safe Model Order no. UP
683 9 •• 03.414.009.1 1 unit
483 5 ••• 03.414.005.1 1 unit
See also: The current
Telecom Special Catalogue!
Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.33
SOCKET STRIPS
DI-STRIP®Combi
Standard CEE 7 V (UTE) / France
- Master-slave with overvoltage protection
and mains filter
- Automatic consumer switching
- Combines functions of the master-slave
(page 7.32) and the safety standard
(page 7.31)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Technical data
Overvoltage protection and mains filter:
Mains voltage: max. 250 Vac
Nominal current 16A
Feature class: D (refined protection in ac-
cordance with DIN VDE 0675)
Surge current resistance (8/20 μs wave):
max. 10 kA
Protection level (1.5/50 μs wave): ‹ 1500 V
(L/N against PE)
Master-slave function:
Threshold setting range
On: 20 mA - 200 mA (approx. 55 mA, sup-
ply status)
Off: 16 mA - 160 mA (approx. 44 mA, sup-
ply status)
Switching delay 550 ms ±/- 20 %
Electronic module, 2-pole switching
Supply schedule
1 socket strip
2 mounting brackets
DOS20037
DOS20036
With master-slave,
overvoltage protection
and mains filter
With master-slave,
overvoltage protection
and mains filter
L S n F1 F2 19” Safe Model Order no. UP
782 9 •• 03.420.109.1 1 unit
733 9 •• 03.420.009.1 1 unit
582 5 •• 03.420.105.1 1 unit
533 5 •• 03.420.005.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.34
DI-STRIP®Compact GST 18 Plug System (Wieland)
Standard CEE 7 V (UTE) / France
- Quick and efficient plug connection system
- Plug-in electro-installation in place of con-
ventional wiring
- Speed:
- Due to simple plugging together of precon-
figured elements
- Flexibility:
- Due to cable (cable length)
- Efficient:
- Easy exchange of socket strips, without ca-
bling expenses
- Safety:
- Due to plug system, all faulty installations
are excluded
- Space-saving:
- Use of protection and switching functions
can be extended to additional socket strips
with no loss of plugging space by extending
cable (maximum load rating of 16 A)
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
DOS20048
DOS20047
DOS20051
DOS20052
DOS20054
DI-STRIP®Safety Basic
With GST 18 plug system / France
- With overvoltage protection
- Technical description, see page 7.30
DI-STRIP®Safety Standard
With GST18 plug system
- With overvoltage protection, with integrated
mains filter and lit switch
- Technical description, see page 7.31
DI-STRIP®Master Slave
With GST18 plug system
- Technical description, see page 7.32
GST 18 with switch
GST 18 without switch
L S n F1 F2 19” Safe Model Order no. UP
583 •6••
With switch 03.402.206.1 1 unit
433 •3••
With switch 03.402.203.1 1 unit
533 7 •• 03.400.207.1 1 unit
383 4 •• 03.400.204.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
433 4 •03.416.204.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
583 5 •03.418.205.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
533 5 •03.414.205.1 1 unit
7.35
SOCKET STRIPS
Power Supply Cable
For GST18 plug system
- Mains plug CEE/VII - GST18 socket (Wieland)
- Cable: HO5VV-F 3G 1.5 mm2
Colour
White
Connection Cable
For GST18 plug system
- GST18 plug - GST 18 socket
- Cable: HO5VV-F 3G 1.5 mm2
Colour
White
GST18 Socket Part
Input
- With screw terminal for cross-section
1.5-2.5 mm2with cable strain relief
- For individual, customer-side connection
Colour
White
GST18 Plug Part
Output
- With screw terminal for cross-section 1.5-
2.5 mm2with cable strain relief
- For individual, customer-side additional ca-
bling
Colour
White
L S n F1 F2 19” Safe Model Order no. UP
2000 04.000.040.0 1 unit
5000 04.000.041.0 1 unit
L S n F1 F2 19” Safe Model Order no. UP
1000 04.000.044.0 1 unit
5000 04.000.045.0 1 unit
L S n F1 F2 19” Safe Model Order no. UP
04.000.046.0 1 unit
L S n F1 F2 19” Safe Model Order no. UP
04.000.047.0 1 unit
DOS00467
DOS00469
DOS00471
DOS00470
For more GST18 accessories see page 7.20
SOCKET STRIPS
7.36
DI-STRIP®Classic
Standard CH SEV 1011
- With/without switch, socket spacing, 100
mm
- Optionally with lit switch, 2-pole switching
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 100 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/10 A
Supply schedule
1 socket strip
2 mounting brackets
DOS00717
DOS00664
DOS00665
Classic with switch
Classic without switch
L S n F1 F2 19” Safe Model Order no. UP
1783 17 •03.700.067.x 1 unit
1383 13 •03.700.063.x 1 unit
983 9 •03.700.059.x 1 unit
583 5 •03.700.055.x 1 unit
1733 •16 •With switch 03.702.066.x 1 unit
1333 •12 •With switch 03.702.062.x 1 unit
933 •8•With switch 03.702.058.x 1 unit
533 •4•With switch 03.702.054.x 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.37
SOCKET STRIPS
DI-STRIP®Compact
Standard CH SEV 1011
- Optionally with lit switch, 2-pole switching
- 19” installation option (with length 483 mm)
- 2 Versions, standard side or design side
- Socket rotation: 45º
- Cable: H05VV-F 3G 1.5 mm2
- Moulded plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/10 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20074
DOS20039
DOS00666
DOS00667
DOS20038
L S n F1 F2 19” Safe Model Order no. UP
883 15 •03.700.015.1 1 unit
732 11 •03.700.111.1 1 unit
683 11 •03.700.011.1 1 unit
532 7 •03.700.107.1 1 unit
483 7 •• 03.700.007.1 1 unit
382 4 •03.700.104.1 1 unit
333 4 •03.700.004.1 1 unit
732 •10 •With switch 03.702.110.1 1 unit
683 •10 •With switch 03.702.010.1 1 unit
532 •6•With switch 03.702.106.1 1 unit
483 •6•• With switch 03.702.006.1 1 unit
382 •3•With switch 03.702.103.1 1 unit
333 •3•With switch 03.702.003.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.38
DI-STRIP®Protector FI/LS
Standard CH SEV 1011
Protector FI / LS
- RCCB and circuit breaker
- Provides a combination of user, overload
and short circuit protection
- Residual operating current Ig = 30 mA
for alternating and intermittent fault
direct current
- Circuit breaker 10 A
- Tripping characteristic type B, 2-pole
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/10 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP®Safety Standard
Standard CH SEV 1011
- With overvoltage protection and integrated
mains filter
- With lit switch,
2-pole switching
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 mm
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Description and technical data
(See page 7.15)
Nominal current 10 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” Mounting brackets (additional with
19” installation option)
DOS00719
DOS00668
DOS00720
DOS00669 With overvoltage protec-
tion and mains filter
L S n F1 F2 19” Safe Model Order no. UP
683 9 •03.710.009.1 1 unit
483 5 •• 03.710.005.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
683 •9•With switch 03.718.009.1 1 unit
483 •5•• With switch 03.718.005.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.39
SOCKET STRIPS
DI-STRIP®Classic
Standard USA NEMA5-15R
- With lit switch
- With overload protection 15A
- Cable: SJT 14 AWG x 3C
- Moulded plug, NEMA5-15P
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 100 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Socket parts and cable: RAL 9011,
graphite black
Load rating
125 Vac/15 A
Supply schedule
1 socket strip
2 mounting brackets
DOS00670 With switch
L S n F1 F2 19” Safe Model Order no. UP
1383 •12 •With switch 03.532.062.1 1 unit
DI-STRIP®Compact
Standard USA NEMA5-15R
- With lit switch
- With overload protection 15A
- 19” installation option (with length 483 mm)
- Cable: SJT 14 AWG x 3C
- Moulded plug, NEMA5-15P
Material / Finish
Casing: closed sheet-steel extrusion,
sheet steel, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 32 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Socket parts and cable: RAL 9011,
graphite black
Load rating
125 Vac/15 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20016 With switch
L S n F1 F2 19” Safe Model Order no. UP
483 •9•• With switch 03.532.009.1 1 unit
383 •6•With switch 03.532.006.1 1 unit
DOS00685
DOS00686
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
SOCKET STRIPS
7.40
DI-STRIP®Surge Protector
Standard USA NEMA5-15R
- With light switch
- With overload protection 15A
- With overvoltage protection
- 19” installation option
- Cable: SJT 14 AWG x 3C
- Moulded plug, NEMA5-15P
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 32 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Socket parts and cable: RAL 9011,
graphite black
Technical data
Mains voltage, 125 Vac
Nominal current 15 A
Surge current resistance (8/20 μs wave):
max. 8 kA
Protection level: ‹ 800 V
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting bracket
DOS20017 With overvoltage protection
L S n F1 F2 19” Safe Model Order no. UP
483 •6•• With switch 03.534.006.1 1 unit
DOS00687
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
Remote PDU, IEC 320
Feed, 16/32 A
DOS80002
IP Ready
• Web Interface
• IPMI 2.0 Interface
• SMASH CLI Interface
• SNMP alarm signalling and SNMP MIB
• Controls with the Raritan Command
Center Secure Gateway
Supervision and control
•
All outputs can be controlled remote and
local
• Power, current, voltage
• RMS power and RMS current
• “History” safety function
• Modern fuse systems
• Alarm and trap signals to
different destinations
• AES 256 hardware
• User authentication via LDAP, MSAD,
CCSG
• SSH CLI
Monitoring
• Internal temperature sensor
• “Feature bus” (RS 485 + single wire)
for external sensors
Power metering
• Max. load rating: 30A, 7200 W
• Available measured variables per
out put:
- Average power consumption
- Real power effective value
- Voltage effective value
- Current effective value
- Apparent power
• The maximum actual value present is
saved and can be also be deleted
• All measurement results can be retrieved
via IPMI,
SNMP, DES SMASH CLI or HTML
interface
• HTML interface for visualising data
history
Power control
• Each connection can be controlled
separately
•
Programmable switch-on delay:
User-definable
• Outputs can be programmed in
virtual groups
• Groups can be defined and real
connections can be assigned
to groups
• All outputs can communicate with IPMI,
SNMP, SMASH CLI and HTML interface
protocols
• 2 fuses per output and group
• Adjustable tripping current
7.41
SOCKET STRIPS
Alarm signalling
• Limit values for current and voltage can
be freely set
• Alarm signalling via e-mail (SMS),
SNMP trap
•
Critical values are displayed red in the
browser window
• Alarm states
• Fuse tripping
• Alarm with an internal temperature of
80°C; automatic alarm switch-off when
the temp. goes back below 70°C
• Alarm when set current and
voltage limit
values are reached
• Display of total power of the connected
devices and the effective power con
sumption
• Status display of fuses
• Connection option for sensors
- Temperature/air humidity
- Digital sensors
Housing / Connections
• All 0 HU, 1 and 2 HU models have:
LED displays
• Can switch between different outputs
• Show the current power consumption
• Status display of fuses
• Serial RJ 11
• SMASH CLI (IPMI profile)
• RJ 45 Ethernet 10/100
• All IP-based connections
• Links status and 10/100 status per LED
• Feature connector
• RS 485 interface
• 1 wire bus
• Connection for external sensors
• Beeper for acoustic signal
(release of circuit breaker)
LEDs control
• Off = unit is not connected to power,
control circuitry’s power supply is
defective, LED is defective
• Red = ON (relay closed) and LIVE
(voltage present)
• Red flashing = ON and LIVE, but there is
overload, current has crossed critical
threshold
• Green = OFF (relay open) and LIVE
• Yellow flashing = ON but NOT LIVE
(circuit breaker open, or other high
voltage rail error)
• Green flashing = OFF but NOT LIVE
Standards
• Linux Core (2.6)
• Standard Security Architecture
• Independent authentication
• Authentication on LDAP, MSAD, NDS
• Server-side certificates
• User rights per outlet
• SSL encryption
• Standard Interfaces
• Web-based access
•
IPMI, IPMI clients with LAN-channel
support
• SMASH CLI (serial, LAN)
• WS MAN (1Q 2007)
• Baytech SNMP over serial
• Standard protocols
• IP v4, IP v6 (from Q2 2007)
• SNMP
DOS80002
DOS80002
Model HU Model V/A Plug Order no. UP
DPCS 12A-16 Remote PDU 0 12x IEC320 C13 230V/16A IEC60309 16A 06.005.281.1 1 unit
DPCS 20A-16 Remote PDU 0 20x IEC320 C13 230V/16A IEC60309 16A 06.005.282.1 1 unit
DPCS 20A-32 Remote PDU 0 20x IEC320 C13 230V/32A IEC60309 32A 06.005.283.1 1 unit
DPCR 8A-16 Remote PDU 1 8x IEC320 C13 230V/16A IEC60309 16A 06.005.284.1 1 unit
DPCR 2x 8A-16 Remote PDU 2 2x 8 IEC320 C13 230V/16A IEC60309 16A 06.005.285.1 1 unit
DPCR 20A-16 Remote PDU 2 20x IEC320 C13 230V/16A IEC60309 16A 06.005.286.1 1 unit
DPCR 20A-32 Remote PDU 2 20x IEC320 C13 230V/32A IEC60309 32A 06.005.287.1 1 unit