Whirlpool FWG UTZU38 WS IT User Manual
Displayed below is the user manual for FWG UTZU38 WS IT by Whirlpool which is a product in the Washing Machines category. This manual has pages.
Related Manuals
www. whirlpool .eu/register
User Manual
2
HEALTH & SAFETY GUIDE ................................................................. 3
Safety Instructions ........................................................................................3
USER MANUAL ........................................................................... 5
Product description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Detergent dispenser .......................................................................................5
Technical data for water connection ........................................................................5
Control panel ..............................................................................................6
Programmes ...............................................................................................6
options & Functions ........................................................................................ 7
Programme chart ..........................................................................................8
Door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Accessories ................................................................................................8
How to use the appliance .................................................................................9
First time use ..............................................................................................9
Daily use ...................................................................................................9
Indicators .................................................................................................11
Hints and tips .............................................................................................11
Cleaning & maintenance .................................................................................12
Cleaning the outside of the washing machine ..............................................................12
Checking the water supply hose ...........................................................................12
Cleaning the mesh lters in the water supply hose .........................................................13
Cleaning the detergent dispenser .........................................................................13
Cleaning the water lter / draining residual water ..........................................................14
Troubleshooting .........................................................................................15
Door – how to open it in case of a failure, to take out your laundry ..........................................16
Transport and handling ...................................................................................16
After-sales service .......................................................................................17
INSTALLATION GUIDE ...................................................................18
USER MANUAL
THANK YOU FOR BUYING A WHILPOOL PRODUCT.
In order to receive a more complete assistance,
please register your appliance on www.whirlpool.eu/register
INDEX
EN
Health & Safety guide
3
SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVED
Before using the appliance, read these safety
instructions. Keep them nearby for future reference.
These instructions and the appliance itself provide
important safety warnings, to be observed at all
times. The manufacturer declines any liability for
failure to observe these safety instructions, for
inappropriate use of the appliance or incorrect
setting of controls.
Very young children (0-3 years) should be kept
away from the appliance. Young children (3-8years)
should be kept away from the appliance unless
continuously supervised. Children from 8years old
and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge can use this appliance only if they
are supervised or have been given instructions on
safe use and understand the hazards involved.
Children must not play with the appliance. Cleaning
and user maintenance must not be carried out by
children without supervision.
Never open the door forcibly or use it as a step.
PERMITTED USE
CAUTION: The appliance is not intended to be
operated by means of an external switching device,
such as a timer, or separate remote controlled system.
This appliance is intended to be used in household
and similar applications such as: sta kitchen areas in
shops, oces and other working environments; farm
houses; by clients in hotels, motels, bed & breakfast
and other residential environments.
Do not load the machine above the maximum
capacity (kg of dry cloth) indicated in the programme
table.
This appliance is not for professional use. Do not
use the appliance outdoors.
Do not use any solvents (e.g. turpentine, benzene),
detergents containing solvents, scouring powder,
glass or general purpose cleaners, or ammable
uids; do not machine wash fabrics that have been
treated with solvents or ammable liquids.
INSTALLATION
The appliance must be handled and installed by
two or more persons- risk of injury. Use protective
gloves to unpack and install- risk of cuts.
If you want to stack a dryer on top of your washing
machine, rst contact our After-Sales Service or your
specialist dealer to verify whether this is possible.
This is only possible if the dryer is attached to the
washing machine by means of appropriate stacking
kit available through our After- Sales Service or your
specialist dealer.
Move the appliance without lifting it by the
worktop or top lid.
Installation, including water supply (if any) and
electrical connections and repairs must be carried
out by a qualied technician. Do not repair or replace
any part of the appliance unless specically stated in
the user manual. Keep children away from the
installation site. After unpacking the appliance,
make sure that it has not been damaged during
transport. In the event of problems, contact the
dealer or your nearest After-sales Service. Once
installed, packaging waste (plastic, styrofoam parts
etc.) must be stored out of reach of children- risk of
suocation. The appliance must be disconnected
from the power supply before any installation
operation- risk of electric shock. During installation,
make sure the appliance does not damage the
power cable - risk of re or electric shock. Only
activate the appliance when the installation has
been completed.
Do not install your appliance where it may be
exposed to extreme conditions, such as: poor
ventilation, temperatures below 5°C or above 35°C.
When installing the appliance make sure that the
four feet are stable and resting on the oor, adjusting
them as required, and check that the appliance is
perfectly to level using a spirit level.
If the appliance is being installed on wood or
“oating” oors (certain parquet and laminate
materials), secure a 60x60x3cm (at least) sheet of
plywood to the oor then place the appliance on
top of this.
Connect the water inlet hose(s) to the water
supply in accordance with the regulations of your
local water company.
For cold ll only models: do not connect to the
hot water supply.
For models with hot ll: the hot water inlet
temperature must not exceed 60°C.
The washing machine is tted with transport
bolts to prevent any possible damage to the interior
during transport. Before using the machine, it is
imperative that the transport bolts are removed.
After their removal, cover the openings with the 4
enclosed plastic caps.
After installation of the device, wait a few hours
before starting it so that it acclimates to the
environmental conditions of the room.
Make sure that the ventilation openings in the
base of your washing machine (if available on your
model) are not obstructed by a carpet or other
material.
Health & Safety guide
4
Use only new hoses to connect the appliance to
the water supply. The old hose-sets should not be
reused.
The supply water pressure must be in the
01-1Mpa range.
ELECTRICAL WARNINGS
It must be possible to disconnect the appliance
from the power supply by unplugging it if plug is
accessible, or by a multi-pole switch installed
upstream of the socket in accordance with the
wiring rules and the appliance must be earthed in
conformity with national electrical safety standards.
Do not use extension leads, multiple sockets or
adapters. The electrical components must not be
accessible to the user after installation. Do not use
the appliance when you are wet or barefoot. Do not
operate this appliance if it has a damaged power
cable or plug, if it is not working properly, or if it has
been damaged or dropped.
If the supply cord is damaged, it must be replaced
with an identical one by the manufacturer, its service
agent or similarly qualied persons in order to avoid
a hazard- risk of electric shock.
CLEANING AND MAINTENANCE
WARNING: Ensure that the appliance is switched
o and disconnected from the power supply before
performing any maintenance operation; never use
steam cleaning equipment- risk of electric shock.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the recycle
symbol .
The various parts of the packaging must therefore be disposed of
responsibly and in full compliance with local authority regulations
governing waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable materials.
Dispose of it in accordance with local waste disposal regulations.
For further information on the treatment, recovery and recycling of
household electrical appliances, contact your local authority, the
collection service for household waste or the store where you purchased
the appliance. This appliance is marked in compliance with European
Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent
negative consequences for the environment and human health.
The symbol on the product or on the accompanying documentation
indicates that it should not be treated as domestic waste but must be
taken to an appropriate collection center for the recycling of electrical
and electronic equipment.
EN
User manual
5
PRODUCT DESCRIPTION
1.
2.
7.
3.
4.
5.
6.
8.
1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Door
6. Water lter - behind plinth
7. Plinth (removable)
8. Adjustable feet (4)
DETERGENT DISPENSER
1. Main wash compartment
• Detergent for the main wash
• Stain remover
• Water softener
• For a liquid detergent it is recommended to use
removable plastic partition A (supplied) for a proper
dosage. If powder detergent is used, place the
partition into slot B.
2. Prewash compartment
• Detergent for the prewash
3. Softener compartment
• Fabric softener
• Liquid starch
Pour softener or starch solution only up to the
“MAX” mark.
4. Release button
(press to remove the detergent dispenser for cleaning)
A
B
TECHNICAL DATA FOR WATER CONNECTION
Water connection
Water supply Cold
Water tap 3/4” threaded hose connector
Minimum water supply pressure 100 kPa (1 bar)
Maximum water supply pressure 1000 kPa (10 bar)
User manual
6
PROGRAMMES
For choosing the appropriate programme for your kind of laundry, always respect the instructions on the care labels of the laundry.
The value given in the tub symbol is the maximum temperature possible for washing the garment.
CONTROL PANEL
1 “ON/OFF” button
2 Programme selector
3 “Start/Pause” button
4 “Spin” button
5 “Intensive rinse” button
6 “Clean+” button
7 “Start delay” button
8 “FreshCare+”/
“Key lock“button
9 “Temperature” button
MIXED
For washing lightly to normally soiled resilient garments in
cotton, linen, synthetic bres and mixed bres.
WHITE
For washing normally to heavily soiled towels, underwear,
table and bed linen, etc in resilient cotton and linen. Only
when the temperature is selected at 90°C the cycle is
provided with a prewash phase before main washing phase.
In this case it is recommended to add detergent both, in the
prewash and main wash section.
COTTON
Normally to heavily soiled and robust cottons .
COTTON
For washing normally soiled cotton garments. At 40°c and
60°C, this is the standard cotton programme and the most
ecient in terms of water and energy consumption.
SPORT
For washing lightly soiled sports clothing (tracksuits, shorts,
etc.). For best results, we recommend not exceeding the
maximum load indicated in the ‚“PROGRAMME CHART”. We
recommend using liquid detergent , and adding the amount
suitable for half-load.
DUVET
Designed for washing eiderdown padded items such
as double or single duvets, cushions and anoraks. It is
recommended to load such padded items in the drum with
the edges folded inwards and not to exceed ¾ of the drum’s
volume. For optimal washing, we recommend using a liquid
detergent.
JEANS
Turn garments inside-out before washing and use a liquid
detergent.
SPIN & DRAIN
Spins the load then empties the water. For resilient
garments. If you exclude the spin cycle, the machine will
drain only
RINSE & SPIN
Rinses and the spins. For resilient garments.
RAPID 30’
For washing lightly soiled garments quickly. This cycle lasts
only 30 minutes, saving time and energy.
COLOURS 15°
This cycle helps protect colours by washing in cold water
(15°C) and uses less energy to heat the water while still
oering satisfactory wash results. Suitable for lightly
soiled, unstained garments. This cycle oers wash results
comparable to 40°c mixed at just 15°C
WOOL
All wool garments can be washed using programme ‚“Wool“
even those carryng the “hand-wash only“ label. For best
results, use special detergents and do not exceed max kg
declaration of laundry.
DELICATES
For washing particularly delicate garments. Preferably turn
garments inside out before washing.
SYNTHETICS
For washing normally soiled garments made from synthetic
bres (such as polyester, polyacrylic, viscose etc.) or cotton/
synthetic blends.
21 53
9
47
8
6
EN
User manual
7
CLEAN+
Clean+ is an option working on 3 dierent levels (Intensive,
Daily and Fast) that are specially designed to set the right
washing action, depending on your cleaning needs:
Intensive : this option is designed for high levels of
dirtiness, removing most stubborn stains.
Daily : this option is designed to remove everyday stains.
Fast : this option is designed to remove lightly soiled
stains.
INTENSIVE RINSE
By selecting this option, the eciency of the rinse is
increased and optimal detergent removal is guaranteed. It is
particularly useful for sensitive skin. Press the button once,
two or three times to select an additional 1
+1
, 2
+2
or 3
+3
rinses after the standard cycle rinse and remove all traces of
detergent. Press the button again to go back to the “Normal
rinse” rinse type.
START DELAY
To set the selected programme to start at a later time, press
the button to set the desired delay time. The symbol
lights on the display when this fuction is enabled. To cancel
the delayed start, press the button again untile the value
‚‘‘0‘‘ is shown on the display.
ON/OFF
To switch on the washing machine: press the
“ON/OFF“ button, the “Start/Pause” button light up.
To switch o the washing machine during the wash cycle,
press and hold the button for approximately 3 seconds. If
the button is pressed briey or accidentally the machine will
not switch o.
To switch o the washing machine after programme end:
press the “ON/OFF“ button until the lights go o.
KNOB
To select and conrm programmes. Turn to
select.
START/PAUSE
To start the programme, after you have nished your
settings. To pause a running programme. To continue a
paused programme.
KEY LOCK
To lock the control panel, press and hold the
“Key lock” button for approximately 3 seconds. The
symbol will light up on the display to indicate that the
control panel has been locked (with the exception of the
“ON/OFF“ button). This prevents unintentional changes
to programmes, especially with children near the machine.
To unlock the control panel, press and hold the “Key lock”
button for approximately 3 seconds .
FUNCTIONS
OPTIONS
BLEACHING
If you wish to bleach the laundry, load the washing machine
and set the “Rinse & Spin” programme.
Start the machine and wait for it to complete the rst water
lling cycle (roughly 2 minutes). Put the machine in pause
mode by pressing the “Start/Pause” button, open
the detergent drawer and pour the bleach (observe the
recommended doses indicated on the package) into the
main wash compartment where the partition was previously
mounted. Restart the cycle by pressing the “Start/Pause”
button.
If desired, it is possible to add fabric softener into the
appropriate compartment of the detergent drawer.
DEMO MODE
This function is only used for sales presentations. By this
you can interact with washing machine and see it working
without water. To enter Demo mode, switch the washing
machine ON and OFF again. Press and hold “Start/Pause”
button, then within 5 seconds press also “ON/OFF“
button and hold both buttons for 10 seconds.
To deactivate this function, switch the washing machine
OFF. Than press and hold “Start/Pause” button, within
5 seconds press also “ON/OFF“ button and hold both
buttons for 2 seconds.
! If the selected function is incompatible with the set programme, the incompatibility will be signalled by a buzzer (3 beeps).
! If the selected function is incompatible with another previously set function the function will not be enabled.
FRESHCARE+
This option enhances washing performance by generating
steam to inhibit the proliferation of the main bad odour
sources inside the machine. After steam phase, the washing
machine will perform gentle tumbling through slow
rotations of the drum. FreshCare+ option starts after the
cycle ends for a maximum duration of 6h and you can
interrupt it at any time by pressing any button on control
panel or turning the knob. Wait around 5 minutes before
door can be opened.
TEMPERATURE
Every programme has a predened temperature. If you
want to change the temperature, press the “temperature”
button. The value appears on the display.
SPIN
Every programme has a predened spin speed. If you want
to change the spin speed, press the "Spin" button. The value
appears on the display.
User manual
8
PROGRAMME CHART
Max load 8 Kg
Power consumption in o-mode 0.5 W / in left-on mode 8.0 W Detergents and additives Recommended
detergent
Residual
dampness % *
Energy
consumption
kWh
Total water lt
Programme
Temperatures Max. spin
speed
(rpm)
Max
load
(kg)
Duration
(Minutes)
Pre-
wash
Main
wash Softener
Powder Liquid
Default Range
Misti Mixed 40°C - 40°C 1000 4.5 ** — —— — —
Bianchi White 60°C - 90°C 1200 8.0 ** (90°) — — —
Cotone Cotton 40°C - 60°C 1200 8.0 220 — 53 1.03 92
Cotone Cotton 60°C - 60°C 1200 8.0 230 — 53 0.70 55
- 40°C 1200 8.0 220 — 53 1.03 92
Sport Sport 40°C - 40°C 600 4.0 ** — —— — —
Piumoni Duvet 30°C - 30°C 1000 3.5 ** — —— — —
Jeans Jeans 40°C - 40°C 800 4.0 ** — —— — —
Centrifuga &
Scarico Spin & Drain — — 1200 8.0 ** — — — — — — — —
Risciacquo &
Centrifuga Rinse & Spin — — 1200 8.0 ** — — — — — — —
Rapido 30´ Rapid 30’ 30°C - 30°C 800 4.5 ** — —— — —
Colours 15° Colours 15° 15°C 15°C 1000 4.5 ** — —— — —
Lana Wool 40°C - 40°C 800 2.0 ** — —— — —
Delicati Delicates 30°C - 30°C — 1.0 ** — —— — —
Sintetici Synthetics 40°C - 60°C 1200 4.5 200 — 32 0.80 78
Dosing required Dosing optional
Cotton - Test wash cycles in compliance with regulations
1061/2010
These are the reference programs for the energy label. Set
this wash cycles with a temperature of 40°C or 60°C. They are
the most efficient programmes in terms of energy and water
consumption for washing normally soiled cotton laundry. The
actual water temperature may differ from the declared one.
For all Test Institutes
Long wash cycle for cottons: set wash cycle Cotton with a
temperature of 40°C.
Synthetic program along: set wash cycle Synthetics with a
temperature of 40°C.
This data may dier in your home due to changing
conditions in inlet water temperature, water pressure etc.
Approximate programme duration values refer to the
default setting of the programmes, without options.
* After programme end and spinning with maximum
selectable spin speed, in default programme setting.
** The duration of the programme is shown on the
display.
6th Sense - the sensor technology adapts water, energy and
programme duration to your wash load.
DOOR
To open the door, pull the handle. To close the door, hold the handle and
push so that you can hear it click shut.
ACCESSORIES
Contact our After-Sales Service to check if the following accessories are available for your washing machine (and dryer) model
STACKING KIT SHELF
By which your dryer can be xed on top of your washing
machine to save space and to facilitate loading and unloading
your dryer in the higher position.
EN
User manual
9
HOW TO USE THE APPLIANCE
FIRST TIME USE
Remove any manufacturing debris:
• Select the “Cotton” programme at a temperature of 60°C.
• Pour a small quantity of detergent powder into the
main wash compartment of the detergent dispenser
(maximum 1/3 of the quantity the detergent manufacturer
recommends for lightly soiled laundry).
• Start the programme without adding any laundry (with
empty drum).
• See section “DAILY USE” for more information on how to
select and start a programme.
DAILY USE
PREPARING THE LAUNDRY
Empty pockets
• Coins, paper clips, etc. could damage the load and
the washing machine components.
• Tissues will break down during the wash cycle,
and the fragments will have to be subsequently
removed by hand.
Close all zippers, buttons, and hooks. Tie all
ribbons or belts
• Insert the smaller garments (e.g. nylon hosiery,
belts, etc.) and garments with hooks (e.g. braziers)
into a fabric bag or a pillowcase with a zipper.
Remove any rings from curtains, or else place the
curtains inside a fabric bag together with the rings.
Fabric type / Symbol on the wash label
• Cottons, mixed bres, easy care/synthetics, wool,
handwash items.
• Colour
Separate coloured and white items. Wash new coloured
articles separately.
• Size
Wash items of dierent sizes in the same wash load, to
improve washing eciency and distribution of the articles
in the drum.
• Delicates
Wash delicate items separately; they require gentle
treatment.
HOW TO USE THE WASHING MACHINE
1. Load laundry
Open the door and load the laundry. Load the
articles one at a time loosely into the drum, without
overlling. Observe the load sizes given in the
“PROGRAMME CHART” table. Overloading the machine will
result in unsatisfactory washing results and creased laundry.
2. Close door
Make sure that no laundry gets stuck between
door glass and rubber seal. Close the door so
that you can hear it click shut.
3. Open water tap
Make sure that the washing machine is connected to
the water mains. Open the water tap.
Switch on washing machine
Press the “ON/OFF” , the “Start/Pause” lamp ashes
slowly.
4. Set the desired programme
Select the required programme with the “Programme
selector” dial. The duration of the wash cycle is shown
on the display. The washing machine automatically
displays the maximum temperature and spin speed settings
possible for the selected programme. Adjust the temperature
and/or spin speed settings if needed with the relative
buttons.
Change temperature, if needed
Press the “Temperature” button to progressively lower
the temperature setting until cold wash has been set
(“- -“ will be shown on the display). Pressing the button
again sets the highest possible setting.
Change spin speed, if needed
Press the “Spin” button to progressively decrease the
spin speed until the spin cycle is turned o (“0” will be
shown on the display). Pressing the button again sets
the highest possible setting.
Select options, if needed
Press the button to select the option; the respective symbol
on display illuminates.
Press the button again to cancel the option; the light
extinguishes.
! If the selected option is incompatible with the programme
set, the incompatibility will be signalled by a buzzer (3 beeps)
and the corresponding indicator light will ash.
! If the selected option is incompatible with another
previously set option, only the most recent selection will
remain active.
User manual
10
5. Add detergent
Pull out the detergent dispenser and add
detergent (and additives/softener) into the relative
compartments as described in section “DETERGENT
DISPENSER”. Observe the dosing recommendations
on the detergent pack.
Correct dosing of detergent / additives is important, because:
• it optimizes the cleaning result
• it avoids irritating residues of surplus detergent in your
laundry
• it saves money by avoiding waste of surplus detergent
• it protects the washing machine by avoiding
calcication of components
• it respects the environment by avoiding unnecessary
environmental burden.
6. Delaying the start of a programme
• To set a programme to start at a later time, see the
section “OPTIONS/ START DELAY”
7. Start programme
• Press the “Start/Pause” . The relative indicator lamp
illuminates, the door locks and the “Door locked”
indicator lights up.
• To avoid overow, do not open the detergent
dispenser during a running programme anymore.
• The remaining programme duration can vary. Factors
like unbalance in the wash load, or foam formation, can
have an eect on the programme duration.
8. Change the settings of a running programme, if
needed
You can still change the settings while a programme is
running. The changes will be applied, provided the respective
programme phase has not nished yet.
To change the settings of a running programme:
• Press “Start/Pause” to put the running programme
on pause.
• Change your settings.
• Press “Start/Pause” again to continue the
programme.
If you have changed the programme, do not add detergent
for the new programme.
To prevent that a running programme is changed by accident
(for instance by children), use the “Key lock” (see section
“FUNCTIONS”).
Pause a running programme and open the door, if
needed
• Press “Start/Pause” to pause a running programme.
• Provided water level or temperature is not too high,
the “Door locked” indicator light turns o. You can
open the door, for example to add more laundry, or to
remove laundry which was loaded by mistake.
• Press “Start/Pause” to proceed with the
programme.
9. Cancelling a running programme, if needed
• Press and hold the “ON/OFF“ button until the
washing machine stops.
• If the water level and temperature are low enough, the
door unlocks and may be opened.
• The door remains locked if there is water in the drum.
To unlock the door, switch the washing machine on,
select the "Spin & Drain" programme and turn the spin
option o by setting the spin speed to “0“.
• The water is emptied and the door unlocks at the end
of the programme.
10. Switch o the washing machine after programme End
• At the end of the cycle, the message "END" is shown on
the display.
• The door can only be opened when the symbol “Door
locked” light turns o.
• Check that the “Door locked” indicator is o, then
open the door and take out the laundry.
• Press “ON/OFF” to switch the washing machine o.
To save energy, if the washing machine is not switched
o manually with the button, it turns o automatically
approximately 30 minutes after the end of the programme.
Leave the door ajar to let the interior of the washing
machine to dry.
EN
User manual
11
DISPLAY INDICATORS
Door locked
This indicator will light up
• after you have started a programme
• the porthole door is locked
FreshCare+ This indicator will light up
• after you press Freshcare+ button
Start delay This indicator will light up
• after you press Start delay button
Key lock This indicator will light up
• after you press Key lock button
Washing phase
indicator
This indicator shows the current programme phase, running from left
to right through wash, rinse and drain. The illuminated indicator light
shows which phase is in progress.
Call Service
Failure: Call After-sales service
• Refer to Troubleshooting section
• If the indicator persist, call After-sales service
Water lter
clogged
Failure: Water lter clogged
• Water cannot be drained; water lter might be blocked
No water Failure: No water
• No or not sucient inlet water.
HINTS AND TIPS
RULES FOR SEPARATING LAUNDRY
• Fabric type / indications on label (cotton, mixed bres,
synthetic, wool, handwash items)
• Colour (separate coloured garments from whites, wash
new coloured items separately)
• Size (wash items of dierent sizes in the same load to
improve washing ecacy and weight distribution in the
drum)
• Delicates (place small items – such as nylon stockings –
and garments with clasps – such as braziers – in a laundry
bag or in a pillow case with a zip).
WASH SYMBOLS ON GARMENT LABELS
The value given in the tub symbol is the maximum
temperature possible for washing the garment.
Normal mechanical action
Reduced mechanical action
Much reduced mechanical action
Hand wash only
Do not wash
CLEAN THE WATER FILTER REGULARLY
• This is needed to prevent the lter from blocking and
preventing the water from draining correctly.
SAVING ENERGY AND PROTECTING THE
ENVIRONMENT
• Keeping within the load limits indicated in the
“PROGRAMM CHART” will optimise energy, water and
detergent consumption and reduce washing times.
• Do not exceed the detergent quantities recommended by
the detergent manufacturer.
• Save energy by using a 60 °C instead of a 90 °C wash
programme, or by using a 40 °C instead of a 60 °C wash
programme. We recommend using the “ Cotton " the
60 °C programme for cotton garments, which is longer,
but uses less energy.
• To save energy and time when washing, select highest
spin speed available for the programme to reduce the
residual water remaining in the garments at the end of the
wash cycle.
• Pretreat any stains with an appropriate stain remover,
or else dampen any dried-on stains with water prior
to washing, as this will reduce the need to use a high
temperature wash programme.
• Use the “Colours 15°” programme for lightly soiled
coloured garments; this will reduce the amount of energy
used to heat the water.
User manual
12
CLEANING & MAINTENANCE
For any cleaning and maintenance, switch o and unplug the washing machine.
Do not use ammable uids to clean the washing machine.
CLEANING THE OUTSIDE OF THE WASHING MACHINE
Use a soft damp cloth to clean the outer parts of the washing
machine.
Do not use glass or general purpose cleaners, scouring
powder or similar to clean the control panel – these
substances might damage the printing.
CHECKING THE WATER SUPPLY HOSE
Check the inlet hose regularly for brittleness and cracks. If
damaged, replace it by a new hose available through our
After-Sales Service or your specialist dealer.
Depending on the hose type:
If the inlet hose has a transparent coating, periodically check
if the colour intensies locally. If yes, the hose may have a leak
and should be replaced.
For water stop hoses: check the small safety valve inspection
window (see arrow). If it is red, the water stop function was
triggered, and the hose must be replaced by a new one.
For unscrewing this hose, press the release button (if
available) while unscrewing the hose.
EN
User manual
13
CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE
1. Close water tap and unscrew the inlet hose.
2.
1
2
Clean the mesh lter at the hose’s end carefully with a
ne brush.
3. Now unscrew the inlet hose on the back of the washing
machine by hand. Pull out the mesh lter from the valve
on the back of the washing machine with pliers and
carefully clean it.
4. Insert the mesh lter again. Connect the inlet hose to
water tap and washing machine again. Do not use a tool
to connect the inlet hose. Open the water tap and check
that all connections are tight.
2
1
CLEANING THE DETERGENT DISPENSER
1. Remove the detergent dispenser by pressing on the
release button and at the same time pulling out the
detergent dispenser.
2.
1
2
Remove the insert from the softener compartment.
3. Clean all parts under running water, removing all
detergent or softener residues.
4.
Wipe the parts dry with a soft cloth.
5. Reinstall the detergent dispenser and push it back into
the detergent compartment.
User manual
14
CLEANING THE WATER FILTER / DRAINING RESIDUAL WATER
Switch o and unplug the washing machine before cleaning the water lter or draining residual water. If you used a
hot wash programme, wait until the water has cooled down before draining any water.
Clean the water lter regularly, to avoid that the water cannot drain after the wash due to obstruction of the lter.
If the water cannot drain, the display indicates that the water lter may be clogged.
6. Remove the kick panel: Using a screwdriver, do that which
is shown in the following gure.
7. Container for the drained water:
Place a low and wide container under the water lter in
order to collect the residual water.
8. Drain the water:
Slowly turn the lter counter-clockwise until all the water
has come out. Allow the water to ow out without
removing the lter. Once the container is full, close the
water lter by turning it clockwise. Empty the container.
Repeat the procedure until all the water has been drained.
9. Remove lter: Lay a cotton cloth beneath the water lter,
which can absorb a small amount of rest water. Then
remove the water lter by turning it out anticlockwise.
10. Clean the water lter: remove residues in the lter and
clean it under running water.
11. Insert the water lter and reinstall the plinth: Reinsert the
water lter again by turning it in clockwise direction. Make
sure to turn it in as far as it goes; the lter handle must be in
vertical position. To test water tightness of the water lter, you
can pour about 1 liter of water into the detergent dispenser.
Then reinstall the plinth.
1
2
EN
User manual
15
TROUBLESHOOTING
Your washing machine is equipped with various automatic
safety and feedback functions. They enable failures
and needed maintenance to be detected and indicated
accordingly.
These failures are frequently so minor that they can be
removed within a few minutes.
Anomalies: Possible causes / Solution:
The washing machine does not
turn on.
• The plug is not inserted into the electrical outlet, or not enough to make contact.
• There has been a power failure.
• The door is not fully closed.
The wash cycle does not start.
• The “ON/OFF” button has not been pressed.
• The “Start/Pause” button has not been pressed.
• The water tap is not open.
• A “Start delay” has been set.
The washing machine does not ll
with water (the message “h2o” is
shown on the display). “Beep”
sound every 5 seconds.
• The water intake hose is not connected to the tap.
• The hose is bent.
• The water tap is not open.
• The mains water supply has been shut o.
• There is not enough pressure.
The washing machine loads and
drains water continuously.
• The “Start/Pause” button has not been pressed.
• The drain hose has not been installed at 65 to 100 cm from the ground.
• The end of the drain hose is immersed in water.
• The drain connector on the wall does not have an air vent.
• If the problem persists after having performed these checks, close the water tap,
shut o the washing machine, and call the After-sales service. If the dwelling is
located on one of the uppermost oors of a building, a siphon eect can
sometimes occur, thus causing the washing machine to load and drain water
continuously. Special anti-siphon valves are available on the market to prevent
these types of problems.
The washing machine does not
drain or does not spin.
• The programme does not include the draining function: with certain programmes
it must be activated manually.
• The drain hose is bent.
• The drain line is obstructed.
The washing machine vibrates
excessively during the spin cycle.
• At the time of installation, the drum was not properly unblocked.
• The washing machine is not level.
• The washing machine is squeezed between furniture and the wall.
The washing machine leaks water.
• The water intake hose has not been tightened properly.
• The detergent dispenser is clogged.
• The drain hose has not been properly fastened.
The machine is locked and the
display ashes, indicating an
error code (e.g. F-01, F-..).
• Shut o the machine, disconnect the plug from the outlet, and wait about 1
minute before turning it back on.
• If the problem persists, call the After-sales service.
Too much foam is formed.
• The detergent is not compatible with the washing machine (it must bear the
wording “for washing machines”, “for hand washing and washing machines”, or
something similar).
• The dosage was excessive.
Door is locked, with or without
failure indication, and the
programme does not run.
• Door is locked in case of power breakdown. Programme will continue
automatically as soon as the mains is available again.
• Washing machine is in a standstill. Programme will continue automatically after
the origin of the standstill does not persist anymore.
User manual
16
TRANSPORT AND HANDLING
Never lift the washing machine by holding it at the worktop.
1. Pull out the mains plug, and close the water tap.
2. Make sure that door and detergent dispenser are properly
closed.
3. Disconnect the inlet hose from the water tap, and remove
the drain hose from your draining point. Remove all rest
water from the hoses, and x them so that they cannot
get damaged during transport.
4. Ret the transport bolts. Follow the instructions for
removing the transport bolts in the “Installation Guide” in
reverse order.
Important: Do not transport the washing machine without
having xed the transport bolts.
EN
User manual
17
AFTERSALES SERVICE
BEFORE CALLING THE AFTERSALES SERVICE
1. See if you can solve the problem by yourself with the help
of the suggestions given in the TROUBLESHOOTING
2. Switch the appliance o and back on again to see if the
fault persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL
OCCURS, GET IN TOUCH WITH THE NEAREST
AFTERSALES SERVICE
To receive assistance, call the number shown on the warranty
booklet or follow the instructions on the website
www .whirlpool. eu
When contacting our Client After-sales service, always
specify:
• a brief description of the fault;
• the type and exact model of the appliance;
XXXXXXXXXX
• the service number (number after the word Service on
the rating plate).
• your full address;
• your telephone number.
If any repairs are required, please contact an authorised after-
sales service (to guarantee that original spare parts will be
used and repairs carried out correctly).
18
1a
1b
x 4
17 mm - 0.67 inch
12 mm - 0.47 inch
3
4
x 1
x 1
2
1c
1d
x 4
1
2 cm - 0,7 inch
Installation guide
19
859991535400EN
max 2,0 cm
max 0,8 inch
ext nn
x 4
m
a
x
2
,
5
m
/
8
,
2
f
e
e
t
max 100cm / 39 inch
min 60cm / 24 inch
A
max 100cm / 39 inch
min 60cm / 24 inch
B
Installation guide