Whirlpool WTE3113 TS User Manual
Displayed below is the user manual for WTE3113 TS by Whirlpool which is a product in the Fridge-Freezers category. This manual has pages.
Related Manuals
Instruction for use
3
ENGLISH Instructions for use Page 4
3
4
IMPORTANT SAFETY INSTRUCTIONS
• WARNING: to avoid a hazard due
to instability, positioning or fixing
of the appliance must be done in
accordance with the manufacturer
instructions.
• WARNING: keep the appliance
ventilation openings clear of
obstruction.
• WARNING: do not damage the
appliance refrigerant circuit pipes.
• WARNING: Do not use
mechanical, electric or
chemical means other than
those recommended by the
Manufacturer to speed up the
defrost process.
• WARNING: Do not use or place
electrical devices inside the
appliance compartments if they
are not of the type expressly
authorised by the Manufacturer.
• WARNING: ice-makers and/
or water dispensers not directly
connected to the water supply
must be filled with potable water
only.
Information: This appliance does
not contain CFCs. The refrigerant
circuit contains R600a (HC).
• Appliances with Isobutane
(R600a): isobutane is a natural
gas without environmental impact,
but is flammable. Therefore,
make sure the refrigerant circuit
pipes are not damaged. Keep
special attention in case of
damaged pipes emptying the
refrigerant circuit.
• C-Pentane is used as blowing
agent in the insulation foam
and it is a flammable gas. Pay
special attention during disposal
operations.
• This appliance is intended to be
used in household and similar
applications such as
- staff kitchen areas in shops,
offices and other working
environments;
- farm houses and by clients
in hotels, motels and other
residential type environments;
- bed and breakfast type
environments;
- catering and similar non-retail
applications
• Do not store explosive
substances such as aerosol cans
with a flammable propellant in this
appliance.
• This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved.
• Cleaning and user maintenance
shall not be made by children
without supervision.
• To avoid the risk of children
becoming trapped and
suffocating, do not allow them to
play or hide inside the appliance.
55
• It must be possible to disconnect
the appliance from the power
supply by unplugging it if plug
is accessible, or by means of
an accessible multi-pole switch
installed upstream of the socket
in conformity with national safety
standards.
• Plug the appliance into a
grounding socket: the appliance
must be correctly connected to an
approved earthing system.
• Do not use single/multi adapters
or extension cords.
• During installation, make sure the
appliance does not damage the
power cable.
• Do not pull the aplliance power
cable
• The appliance must be handled
and installed by two or more
persons.
• In order to avoid an hazard,
installation and maintenance,
including Power cable
replacement, must be carried
out by a qualified technician,
in compliance with the
manufacturer’s instructions and
the local safety regulations in
force. Do not repair or replace
any part of the appliance unless
specifically stated in the user
manual.
SAFEGUARDING THE ENVIRONMENT
1. Packing
The packing material is 100% recyclable and bears
the recycling symbol . For disposal, comply with
the local regulations. Keep the packing materials
(plastic bags, polystyrene parts, etc.) out of the
reach of children, as they are a potential source of
danger.
2. Scrapping/Disposal
The appliance is manufactured using recyclable
material.
This appliance is marked in compliance with
European Directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE). By ensuring
the correct disposal of this appliance, you can help
prevent potentially negative consequences for the
environment and the health of persons.
The symbol on the appliance, or on the
accompanying documents, indicates that this
appliance should not be treated as domestic waste
but must be taken to a special collection centre for
the recycling of electrical and electronic equipment.
When scrapping the appliance, make it unusable by
cutting off the power cable and removing the doors
and shelves so that children cannot easily climb
inside and become trapped.
Scrap the appliance in compliance with local
regulations on waste disposal, taking it to a special
collection centre; do not leave the appliance
unattended even for a few days, since it is a
potential source of danger for children.
For further information on the treatment, recovery
and recycling of this product, contact your
competent local office, the household waste
collection service or the shop where you purchased
the appliance.
Declaration of conformity
• This appliance has been designed for preserving
food and is manufactured in compliance with
Regulation (CE) No. 1935/2004.
• This appliance has been designed, manufactured
and marketed in compliance with:
- safety objectives of the “Low Voltage” Directive
2006/95/CE (which replaces 73/23/CEE and
subsequent amendments);
- the protection requirements of Directive “EMC”
2004/108/EC.
66
PRECAUTIONS AND GENERAL RECOMMENDATIONS
INSTALLATION
• Be careful not to damage the floors (e.g. parquet)
when moving the appliance.
• Make sure the appliance is not near a heat
source.
• Install and level the appliance on a floor strong
enough to take its weight and in a place suitable
for its size and use.
• The appliance is arranged for operation in places
where the temperature comes within the following
ranges, according to the climatic class given on
the rating plate. The appliance may not work
properly if it is left for a long time at a temperature
outside the specified range.
Climatic Class Amb. T. (°C)
SN From 10 to 32
NFrom 16 to 32
ST From 16 to 38
TFrom 16 to 43
• Make sure the voltage specified on the rating
plate corresponds to that of your home.
SAFE USE
• Do not store or use petrol, flammable liquids
or gas in the vicinity of this or other electrical
appliances. The fumes can cause fires or
explosions.
• Do not swallow the contents (non-toxic) of the ice
packs (in some models).
• Do not eat ice cubes or ice lollies immediately
after taking them out of the freezer since they may
cause cold burns.
• For products designed to use an air filter inside an
accessible fan cover, the filter shall be always in
position when the refrigerator is in function.
• Before carrying out any maintenance or cleaning
operation, unplug the appliance or disconnect it
from the power supply.
• Use the refrigerator compartment only for storing
fresh food and the freezer compartment only
for storing frozen food, freezing fresh food and
making ice cubes.
• Do not store glass containers with liquids in the
freezer compartment since they may break.
• Avoid storing unwrapped food in direct contact
with internal surfaces of the refrigerator or freezer
compartments.
• “The bulb used inside the appliance is specifically
designed for domestic appliances and is not
suitable for general room lighting within the home
(EC Regulation 244/2009)”.
The Manufacturer declines any liability for
injury to persons or animals or damage to
property if the above advice and precautions
are not respected.
To ensure best use of your appliance, carefully
read the operating instructions which contain a
description of the product and useful advice.
Keep these instructions for future reference.
1. After unpacking the appliance, make sure it is not
damaged and that the door closes properly. Any
damage must be reported to the dealer within
24 hours of delivery of the appliance.
2. Wait at least two hours before switching the
appliance on, to ensure that the refrigerant circuit
is fully efficient.
3. Clean the inside of the appliance before using it.
BEFORE USING THE APPLIANCE
7
• Install the appliance in a dry, well ventilated room
far away from any heat source (e.g. radiator,
cooker, etc.) and in a place not exposed directly
to the sun. If required, use an insulating plate.
• To guarantee adequate ventilation follow
installation instructions.
• Insufficient ventilation on back of the product
increases energy consumption and decreases
cooling efficiency.
• The internal temperatures of the appliance
may be affected by the ambient temperature,
frequency of door opening, as well as location of
the appliance. Temperature setting should take
into consideration these factors.
• Allow warm food and drinks to cool down before
placing in the appliance.
• Do not obstruct the fan (if available) with food
items.
• After placing the food check if the door of
compartments closes properly, especially the
freezer door.
• Reduce to a minimum door opening.
• When thawing frozen food, place them in the
refrigerator. The low temperature of the frozen
products cools the food in the refrigerator.
• Appliances could have special compartments
(Fresh Food Compartment, Zero Degree Box,...).
In case not differently specified in the specific
booklet of product, they can be removed,
maintaining equivalent performances.
• Positioning of the shelves in the refrigerator has
no impact on the efficient usage of energy. Food
should be placed on the shelves in such way to
ensure proper air circulation (food should not
touch each other and distance between food and
rear wall should be kept).
• You can increase storage capacity of frozen
food by removing baskets and, if present, Stop
Frost shelve, maintaining an equivalent energy
consumption.
• Damaged gasket must be replaced as soon as
possible.
• High energy class products are fitted with high-
efficiency motors that remain operational for
longer, but have a low power consumption. Do
not worry if the engine continues to run for longer
periods.
ENERGY-SAVING TIPS
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A 13amp
fused plug, to change a fuse in this type of plug use an A.S.T.A.
approved fuse to BS 1362 type and proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
3. Refit both into plug.
Important:
The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used
until a correct replacement is fitted.
Correct replacement are identified by the colour insert or the colour embossed in words on the base of the
plug.
Replacement fuse covers are available from your local electrical store.
For the Republic of Ireland only
The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is
also used, the 2-pin, side earth type.
Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet, please contact After-sales Service for further
instruction. Please do not attempt to change plug yourself. This procedure needs to be carried out by
a qualified technician in compliance with the manufactures instructions and current standard safety
regulations.
ELECTRICAL CONNECTION FOR GREAT BRITAIN AND IRELAND ONLY
400010761957
195138732.00 01/16
FRGB