Whirlpool WWDP 10716 User Manual
Displayed below is the user manual for WWDP 10716 by Whirlpool which is a product in the Washer Dryers category. This manual has pages.
Related Manuals
www.whirlpool.eu/register
Instructions for use
2
ENGLISH ................................... 3
3
EN
ENGLISH
SAFETY AND INSTALLATION
INSTRUCTIONS
THANK YOU FOR BUYING AN WHIRLPOOL PRODUCT.
For even more complete user support, register your
appliance at www.whirlpool.eu/register
Use and Maintenance
Index
Health and Safety guide
SAFETY INSTRUCTIONS ...................................................................... 5
IMPORTANT: TO BE READ AND RESPECTED .............................................................5
SAFEGUARDING THE ENVIRONMENT .......................................................... 8
DECLARATION OF CONFORMITY .............................................................. 9
PRODUCT DESCRIPTION ....................................................................10
APPLIANCE ..........................................................................................10
CONTROL PANEL .....................................................................................10
DETERGENT DISPENSER ..............................................................................11
TECHNICAL SPECIFICATIONS FOR THE WATER CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
DOOR ...............................................................................................12
HOW TO USE THE APPLIANCE ................................................................13
FIRST TIME USE ......................................................................................13
DAILY USE ...........................................................................................13
HOW TO USE THE WASHER DRYER ....................................................................14
PROGRAMMES AND OPTIONS ........................................................................16
FUNCTIONS ..........................................................................................19
HINTS AND TIPS ......................................................................................20
ENERGY SAVING TIPS .................................................................................21
4
CLEANING AND MAINTENANCE ..............................................................22
CLEANING THE WASHER DRYER EXTERNALLY ..........................................................22
CHECKING THE WATER INTAKE HOSE ..................................................................23
WATER PROTECTION SYSTEM ........................................................................24
CLEANING THE FILTERS IN THE WATER INTAKE HOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
CLEANING THE DETERGENT DISPENSER ...............................................................26
CLEANING THE WATER FILTER / DRAINING THE RESIDUAL WATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
TRANSPORT AND HANDLING .........................................................................29
TROUBLESHOOTING ........................................................................30
DOOR – HOW TO OPEN IT TO REMOVE THE LAUNDRY IN THE EVENT OF A MALFUNCTION . . . . . . . . . . . . . . .32
CUSTOMER SUPPORT SERVICE ........................................................................33
INSTALLATION GUIDES ..............................................................................34
EN
5
SAFETY INSTRUCTIONS
IMPORTANT: TO BE READ AND RESPECTED
Health and Safety guide
! This symbol is used to remind you to read this manual.
Before using the appliance
carefully read Health and
Safety and Use and Care
guides.
Keep these instructions close
at hand for future reference.
YOUR SAFETY AND SAFETY
OF OTHERS IS VERY
IMPORTANT.
This manual and the appliance
itself provide important safety
warnings, to be read and
observed at all times.
This is the safety alert symbol.
This symbol alerts you to
potential hazards that can kill
or hurt you and others.
All safety messages will follow
the safety alert symbol or the
word “DANGER” or
“WARNING”. These words
mean:
DANGER
Indicates a hazardous situation
which, if not avoided, will cause
serious injury.
WARNING
Indicates a hazardous situation
which, if not avoided, could
cause in serious injury.
All safety warnings give
specic details of the potential
risk presented and indicate
how to reduce risk of injury,
damage and electric shock
resulting from improper use of
the appliance. Carefully
observe the following
instructions.
Failure to observe these
instructions may lead to risks.
The Manufacturer declines any
liability for injury to persons or
animals or damage to property
if these advices and
precautions are not respected.
Very young (0-3 years) and
young children (3-8 years) shall
be kept away unless
continuously supervised.
Children from 8 years old and
above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge can
use this appliance only if they
are supervised or have been
given instructions on safe
appliance use and if they
understand the hazards
involved. Children shall not
play with the appliance.
Cleaning and user
maintenance shall not be
made by children without
supervision.
Remove the transport bolts
The appliance is tted with
transport bolts to avoid any
possible damage to the interior
during transport. The safety
bolts used for transport must
absolutely be removed before
activating the washer dryer.
After their removal, cover the
openings with the 4 enclosed
plastic caps.
Never open the door forcibly
or use it as a step.
Items that have been soiled
with substances such as
cooking oil, acetone, alcohol,
petrol, kerosene, spot
removers, turpentine, waxes
and wax removers should be
washed in hot water with an
extra amount of detergent
before being dried in the
tumble dryer.
Items such as foam rubber
(latex foam), shower caps,
waterproof textiles, rubber
backed articles and clothes or
pillows tted with foam rubber
pads should not be dried in the
tumble dryer.
WARNING
Remove all objects from
pockets such as lighters and
matches.
Do not use the tumble dryer if
chemicals have been used for
cleaning.
Oil-soaked items ignite
spontaneously, especially
when exposed to heat sources
such as in a tumble dryer. The
items become warm, causing
an oxidation reaction in the oil.
Oxidation creates heat. If the
heat is unable to be dissipated,
the resulting overheating could
cause the garments to catch
re.Piling, stacking or storing
oil-soaked items can prevent
heat from escaping and so
create a re hazard.
6
When installing the appliance
make sure that the four feet are
stable and resting on the oor,
adjusting them as required,
and check that the appliance is
perfectly level using a spirit
level.
In the case of installation on
wood or oating oors,
position the washer dryer on a
plywood panel that has been
xed to the oor, which must
be at least 60 x 60 cm in size,
and at least 3 cm thick.
Use only new hoses to connect
the appliance to the water
supply. Used hoses must not
be used and should be
discarded.
Do not move the washer dryer
while holding onto its upper
surface.
Connect the water inlet hose(s)
to the water supply in
accordance with the
regulations of your local water
company.
For models dedicated only for
cold water: Do not connect to
the hot water supply.
For models with hot ll: the hot
water inlet temperature must
not exceed 60°C.
Make sure that the ventilation
openings in the base of your
appliance (if available on your
model) are not obstructed by a
carpet or other material.
The supply water pressure
must be in range 0.1 -1 MPa.
The appliance must not be
installed in such a way as to
impede its door from opening
completely (e.g. behind a
lockable door, a sliding door, or
a door that is hinged on the
side opposite to that of the
appliance itself).
ELECTRICAL WARNINGS
Make sure the voltage
specied on the rating plate
Do not stop the appliance until
the drying cycle has been
completed;if this should be
necessary, quickly remove all
the garments and lay them out
in order to facilitate the heat's
dissipation.
The last phase of the drying
cycle is done without heat
(cool down phase), to assure
that the laundry stays at a
temperature level which is not
leading to a damaging of the
laundry.
INTENDED USE OF THE
PRODUCT
This appliance is designed
solely for domestic usage. To
aim the appliance as
professional use is forbidden.
The manufacturer declines all
responsibility for inappropriate
use or incorrect setting of the
controls.
CAUTION : The appliance is
not intended to be operated
by means of an external timer
or separate remote control
system.
Do not use the appliance
outdoors.
Do not store explosive or
ammable substances such as
aerosol cans and do not place
or use gasoline or other
ammable materials in or near
the appliance: a re may break
out if the appliance is
inadvertently switched on.
This appliance is designed
exclusively for domestic use
with loads of laundry that can
be washed and spun in a
washer dryer machines.
INSTALLATION
Installation and repairs must
be carried out by a qualied
technician, in compliance with
the manufacturer’s instructions
and local safety regulations. Do
not repair or replace any part
of the appliance unless
specically stated in the user
manual.
Children should not perform
installation operations. Keep
children away during
installation of the appliance.
Keep the packaging materials
(plastic bags, polystyrene
parts, etc.) out of reach of
children, during and after the
installation of the appliance.
Use protective gloves to
perform all unpacking and
installation operations.
After unpacking the appliance,
make sure that it has not been
damaged during transport. In
the event of problems, contact
the dealer or your nearest
Customer Support Service.
The appliance must be
handled and installed by two
or more persons.
Keep children away during
installation of the appliance.
The appliance must be
disconnected from the power
supply before carrying out any
installation operation.
During installation, make sure
the appliance does not
damage the power cable.
Only activate the appliance
when the installation
procedure has been
completed.
After installation of the device
to wait a few hours before
starting it, to acclimatise to the
environmental conditions of
the room.
Do not install your appliance
where it may be exposed to
extreme conditions, such as:
poor ventilation, temperature
below 5°C or above 35°C.
EN
7
Socket outlet / plug (valid for
both countries)
If the tted plug is not suitable
for your socket outlet, contact
Customer Support for further
instruction. Do not replace the
plug on your own.This
operation must only be carried
out by a qualied technician, in
compliance with the
manufacturer's instructions
and the current safety
regulations.
CORRECT USE
Do not exceed the maximum
load allowed. Check the
maximum load allowed in the
programme chart.
Close the water tap when the
washer dryer is not in use.
Do not use any solvents (e.g.
turpentine, benzene),
detergents containing
solvents, scouring powder,
glass or general purpose
cleaners, and ammable uids;
do not wash fabrics treated
with solvents or ammable
liquids in the washer dryer.
Do not over-dry the laundry.
Fabric softeners, or similar
products, should be used as
specied by the fabric softener
instructions.
Do not dry unwashed laundry.
CLEANING AND
MAINTENANCE
The appliance must be
disconnected from the power
supply before carrying out any
cleaning or maintenance
operation.
Never use steam cleaning
equipment.
corresponds to that of your
home.
For installation to comply with
current safety regulations, an
omnipolar switch with
minimum contact gap of 3mm
is required.
Regulation require that the
appliance is earthed.
For appliances with tted plug,
if the plug is not suitable for
your socket outlet, contact a
qualied technician.
Do not use extension leads,
multiple sockets or adapters.
Do not connect the appliance
to a socket which can be
operated by remote control.
The power cable must be long
enough for connecting the
appliance, once tted in its
housing, to the main power
supply.
Do not pull the power supply
cable.
If the power cable is damaged
it must be replaced with an
identical one. The power cable
must only be replaced by a
qualied technician in
compliance with the
manufacturer instruction and
current safety regulations.
Contact an authorised service
centre.
Do not operate this appliance
if it has a damaged mains cord
or plug, if it is not working
properly, or if it has been
damaged or dropped. Do not
immerse the mains cord or
plug in water. Keep the cord
away from hot surfaces.
The electrical components
must not be accessible to the
user after installation.
Do not touch the appliance
with any wet part of the body
and do not operate it when
barefoot.
ELECTRICAL CONNECTIONS
FOR GREAT BRITAIN AND
IRELAND ONLY
Fuse replacement
If the mains lead of this
appliance is tted with a BS
1363A 13amp fused plug, to
change a fuse in this type of
plug use an A .S .T .A .
approved fuse to BS 1362 type
and proceed as follows:
1. Remove the fuse cover (A)
and the fuse (B).
2. Insert the 13A replacement
fuse inside the cover.
3. Insert both into the plug.
Important:
The cover must be re-installed
after having replaced the
fuse;if lost, the plug cannot be
used and must be replaced.
Correct replacement are
identied by the colour insert
or the colour embossed in
words on the base of the plug.
Replacement fuse covers are
available from your local
electrical store.
For the Republic of Ireland
only
The information given in
respect of Great Britain will
frequently apply, but a third
type of plug and socket is also
used, the 2-pin, side earth
type.
8
This appliance is marked in
compliance with European
Directive 2012/19/EU, Waste
Electrical and Electronic
Equipment (WEEE).
By ensuring this product is
disposed of correctly, you will
help prevent potential negative
consequences for the
environment and human
health, which could otherwise
be caused by inappropriate
waste handling of this product.
The symbol (*) on the
product or on the
accompanying
documentation indicates
that it should not be treated as
domestic waste but must be
taken to an appropriate
collection centre for the
recycling of electrical and
electronic equipment.
ENERGY SAVING TIPS
Always dry a full load,
depending on the type of
laundry and the programme/
drying time. For more detailed
information, see the
programme chart.
By preference use the
maximum spin speed allowed
by your appliance, since
draining the water mechanically
requires less energy. You will
save time and energy when
running your drying cycle.
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is 100%
recyclable and is marked with
the recycle symbol (*). The
various parts of the packaging
must therefore be disposed of
responsibly, and in strict
compliance with the regulations
established by the local
authorities.
SCRAPPING OF HOUSEHOLD
APPLIANCES
When scrapping the appliance,
make it unusable by cutting o
the power cable and removing
the doors and shelves (if
present) so that children cannot
easily climb inside and become
trapped.
This appliance is manufactured
with recyclable (*) or reusable
materials. Dispose of it in
accordance with local waste
disposal regulations.
For further information on the
treatment, recovery and
recycling of household
electrical appliances, contact
your competent local authority,
the collection service for
household waste or the store
where you purchase the
appliance.
SAFEGUARDING
THE ENVIRONMENT
Always select the correct
programme/drying time for the
load in order to obtain the
desired drying results.
Select the ‘Gentle’ option only
in case of drying small loads.
When drying cotton garments,
for example, load the garments
to be ironed and those not to
be ironed together. Begin by
setting the programme or the
drying time for the garments
to be ironed; at the end of the
cycle, remove the laundry to
be ironed, then dry the
remainder of the load by
setting the programme for the
garments that do not need to
be ironed.
EN
9
“This appliance has been
designed, constructed and
distributed in compliance with
the safety requirements of
European Directives :
-2006/95/EC Low Voltage
Directive
-2004/108/EC Electromagnetic
Compatibility Directive”.
DECLARATION OF
CONFORMITY
10
APPLIANCE
PRODUCT DESCRIPTION
CONTROL PANEL
1.
3.
2.
5.
4.
7.
6.
8.
Use and Maintenance
1. Top
2. Detergent dispenser
3. Control Panel
4. Lid handle
5. Door
6. Water lter - behind
kick panel
7. Removable kick panel
8. Adjustable feet (2)
30’
45’
90’
40°
60°
h.
1. 2. 3. 12. 11.
9.8.
6.
4. 10.
13.
7.
5.
1. On/O button
2. Programme selector
3. Key Lock button
4. Drying settings button
5. Dry Only Button
6. Temperature button
7. Spin button
8. Delay timer button
9. Easy Iron button
10. Intensive Rinse
button
11. Colours 15°C button
12. Display
13. Start/Pause button
11
EN
Prewash Compartment
• Detergent for prewash
Main Wash Compartment
• Detergent for the main wash
• Stain remover
• Water softener
Softener compartment
• Softener
• Liquid starch
Pour softener or starch solution into
the compartment without exceeding
the “max” level.
Release button
(press to remove tray for cleaning).
Preferably use the partition A when
washing with a liquid detergent for
washing, to ensure that the correct
quantity of detergent is used (the
partition is included in the bag containing
the instructions).
Move the partition into slot B when using
detergent powder.
DETERGENT DISPENSER
BA
12
TECHNICAL SPECIFICATIONS FOR THE WATER
CONNECTION
INPUT WATER Cold
WATER TAP Threaded attachment for 3/4" exible hose
MINIMUM WATER INTAKE PRESSURE 100 kPa (1 bar)
MAXIMUM WATER INTAKE PRESSURE 1000 kPa (10 bar)
DOOR
To open the door, pull the handle. To close the door, push on the handle until it clicks.
13
EN
The rst time the machine is switched on, you will
be asked to select the language and the display will
automatically show the language selection menu.
To select the desired language press the and
h.
buttons; to conrm the selection press the
button.
To change the language switch o the machine and
press buttons , , simultaneously until an
alarm is heard: the language-selection menu will be
displayed again.
To change the display luminosity, which by default
is set to the medium value, switch the machine o
then simultaneously press buttons , and
until the buzzer sounds. Press buttons and
h.
to
choose the desired level of luminosity then conrm
by pressing button .
HOW TO USE THE
APPLIANCE
FIRST TIME USE
1. EMPTY POCKETS
• Coins, paper clips, etc. could damage the
load and the washer dryer's components.
• Tissues will break down during the wash
cycle, and the fragments will have to be
subsequently removed by hand.
2. CLOSE ALL ZIPPERS,
BUTTONS, AND HOOKS. TIE ALL
RIBBONS OR BELTS.
• Insert the smaller garments
(e.g. nylon hosiery, belts, etc.) and garments
with hooks (e.g. braziers) into a fabric bag or a
pillowcase with a zipper. Remove any rings from
curtains, or else place the curtains inside a fabric
bag together with the rings.
3. FABRIC TYPE / SYMBOL ON THE WASH LABEL
Cotton, mixed fabrics, synthetics, wool, garments
to be washed by hand.
• Colour
separate the white garments from the coloured
garments. Wash any new coloured garments
separately.
• Size
Wash items of dierent sizes in the same load to
improve washing ecacy and weight distribution
inside the drum.
• Delicates
Wash delicate garments separately; these
garments require special handling.
DAILY USE
PREPARING THE LAUNDRY
Remove any manufacturing debris:
• Select the programme with a temperature
setting of 90°C.
• Pour a small quantity of detergent powder into
the main wash compartment of the
detergent dispenser (maximum 1/3 of
the quantity the detergent
manufacturer recommends for lightly
soiled laundry).
• Start the programme without loading the
washer dryer machine (with empty drum).
14
HOW TO USE THE WASHER DRYER
1. LOADING LAUNDRY.
•Prepare the laundry, following the
recommendations given in the section
“HINTS AND TIPS”. - Open the door and
load the laundry into the drum, without
exceeding the maximum load capacities
indicated in the Programmes and Options.
•Close the door, pressing until the latch
audibly locks, and check that there
is no laundry trapped between the
door glass and the rubber seal.
2. OPEN THE WATER TAP
Check that the washer dryer is connected
correctly to the water mains. Open the water
tap.
3. SWITCHING ON THE WASHER DRYER
MACHINE.
Press button ; the lamp ashes slowly.
4. SELECTING A PROGRAMME AND
CUSTOMISING A CYCLE. The following
functions are possible with this appliance:
•Wash only
•Wash and dry
•Dry only
Wash only
Select the required programme with the
PROGRAMME selector dial. The display will
show the name and duration of the cycle. The
washer dryer machine automatically displays
the maximum temperature and spin speed
settings possible for the selected programme.
Adjust the temperature and/or spin speed
settings if needed with the relative buttons.
•Press button to cycle through
progressively lower temperature settings
until cold wash is set (“- -“) shown on display.
•Press button to cycle through
progressively lower spin speed settings until
the spin cycle is turned o (“- -“ shown on
display).
Pressing the button again sets the highest
possible setting.
Select the required options (if necessary).
•Pressthebuttontoselecttheoption;the
respective button lamp illuminates.
•Pressthebuttonagaintocanceltheoption;
the lamp extinguishes.
! If the selected option is not compatible
with the programme set, an error warning
tone sounds and the wording “No Selection”
is shown on the display. The option is not
selected.
Wash and dry
To wash and dry a load with no interruption
between the wash and dry cycles, make sure
that the load does not exceed the maximum
permissible drying load for the selected
programme (see the column “Max. drying load”
in the Programmes and Options).
1. Follow the instructions given in the
paragraph “Wash Only” to select and,
if necessary, customise the required
programme.
2. Press to select the required drying mode.
Two drying modes are available: automatic or
timer.
- Automatic drying with selectable levels:
In automatic drying mode, the washer dryer
machine dries the laundry until the set level
of dryness is reached. Pressing button once
automatically selects the highest drying level
available for the selected programme. Press
the button again to reduce the drying level.
The following levels are available:
Cupboard extra dry : suitable for garments
which need to be dried completely, such as
sponges and bathrobes.
Cupboard dry : laundry is completely dry
and ready to be put away in the wardrobe
without ironing.
Hanger dry : laundry is left slightly damp to
minimise creasing. Garments must be hung
to air dry completely.
Iron dry : garments are left reasonably
damp to make ironing easier.
- Timer drying mode:
Press button repeatedly to set timer drying
mode. After cycling through all the automatic
drying levels, continue pressing button
until the desired time is displayed. Values
from 180 to 30 minutes are settable.
To wash a load of laundry larger than the
maximum permissible load for drying (see the
column “Max. drying load” in the Programmes
and Options), remove a few garments once the
washing cycle has nished before starting the
drying cycle. Proceed as follows:
1. Follow the instructions given in the paragraph
“Wash Only” to select and, if necessary,
customise the required programme.
2. Do not include a drying cycle.
3. Once the washing cycle is nished, open the
door and remove a few garments to reduce
the load. Now follow the instructions for
“Dry only”.
N.B.: always allow a cooling down period after
drying before opening the door.
When using the two preset cycles and
, it is not necessary to select and start a
drying cycle.
15
EN
Dry only
This function is used to simply dry a wet load
washed previously in the washer dryer or by
hand.
1. Select a suitable programme for the laundry
you want to dry (e.g. select cotton to dry wet
cotton laundry).
2. Press button to dry without a wash cycle.
3. Press to select the required drying mode. Two
drying modes are available: automatic drying by
levels or drying by time.
- Automatic drying with selectable levels:
In automatic drying mode, the washer dryer
machine dries the laundry until the set level of
dryness is reached. Pressing button once
automatically selects the highest drying level
available for the selected programme. Press the
button again to reduce the drying level.
The following levels are available:
Cupboard extra dry : suitable for garments
which need to be dried completely, such as
sponges and bathrobes.
Cupboard dry : laundry is completely dry and
ready to be put away in the wardrobe without
ironing.
Hanger dry : laundry is left slightly damp to
minimise creasing. Garments must be hung to
air dry completely.
Iron dry : garments are left reasonably damp
to make ironing easier.
- Timer drying mode:
Press button repeatedly to set timer drying
mode. After cycling through all the automatic
drying levels, continue pressing button until
the desired time is displayed.
Values from 180 to 30 minutes are settable.
N.B.: always allow a cooling down period after
drying before opening the door.
5. USING THE CORRECT AMOUNT OF
DETERGENT. Pull out the tray and pour
detergent into the relative compartments
as described in “Detergent dispenser”. This is only
necessary when using a wash only or a wash +
dry programme.
6. DELAYING THE START OF A PROGRAMME. To
set a programme to start at a later time, see the
section “Programmes and Options”.
7. STARTING A PROGRAMME.
Press the START/PAUSE button. The relative
indicator lamp illuminates, the door locks
and the door open symbol extinguishes.
To change a programme while a cycle is in
progress, press START/PAUSE to pause the
washer dryer (the START/ PAUSE lamp ashes
amber slowly); then select the required cycle
and press START/PAUSE again. To open the
door while a cycle is in progress, press START/
PAUSE; the door may be opened if the
symbol lights. Press the START/PAUSE button
again to resume the programme from where it
was paused.
8. CANCELLING A RUNNING PROGRAMME IF
NECESSARY
Press and hold the button until the washer
dryer stops.
If the water level and temperature are low
enough, the door unlocks and may be opened.
The door remains locked if there is water in the
drum. To unlock the door, switch the washer
dryer on, select the
programme and turn the spin function o
by setting the spin speed to “- -“. The water is
emptied and the door unlocks at the end of the
programme.
9. SWITCHING THE WASHER DRYER OFF AT THE
END OF A PROGRAMME.
At the end of the cycle, the message “Cycle end”
is shown on the display. The door can only be
opened when the symbol lights. Check that
the door unlocked symbol is lit, then open the
door and take out the laundry.
Press to switch the washer dryer o. To save
energy, if the washer dryer is not switched
o manually with the button, it turns o
automatically approximately 30 minutes after
the end of the programme.
Leave the door ajar to let the interior of the
washer dryer dry.
16
PROGRAMME Wash type and recommendations Wash
symbols
Settings
COTTON For washing normally to heavily soiled
towels, underwear, table and bed linen
etc. in resilient cotton and linen.
Max. wash load max
Max. drying load 7 kg
TeMperaTure Cold - 90°C
Max. spin speed max
selecTable opTions Delay Timer,
Colours 15°, Easy Iron,
Intensive Rinse, Dry Only
COLOURS For washing coloured cotton garments.
This programme is optimised to keep
colours bright even after repeated
washing.
Max. wash load max
Max. drying load 7 kg
TeMperaTure Cold - 40°C
Max. spin speed max
selecTable opTions Delay Timer,
Colours 15°, Easy Iron,
Intensive Rinse, Dry Only
SYNTHETICS For washing normally soiled garments
made from synthetic bres (such as
polyester, polyacrylic, viscose etc.) or
cotton/synthetic blends.
Max. wash load 5 kg
Max. drying load 5 kg
TeMperaTure Cold - 60°C
Max. spin speed 1000
selecTable opTions Delay Timer,
Colours 15°, Easy Iron,
Intensive Rinse, Dry Only
DELICATES For washing particularly delicate
garments. Preferably turn garments
inside out before washing.
Max. wash load 1 kg
Max. drying load 1 kg
TeMperaTure Cold - 30°C
Max. spin speed -
selecTable opTions Delay
Timer, Colours 15°, Easy
Iron, Dry Only
WOOL Woolmark Apparel Care - Green:
The wool wash cycle of this machine
has been approved by The Woolmark
Company for the washing of wool
garments labelled as “hand wash”
provided that the products are washed
according to the instructions on the
garment label and those issued by
the manufacturer of this washer dryer.
(M1135)
Max. wash load 2,5 kg
Max. drying load 2,5 kg
TeMperaTure Cold - 40°C
Max. spin speed 800
selecTable opTions Delay
Timer, Colours 15°,
Intensive Rinse (Extra +1),
Dry Only
ECO
COTTON 12
For washing normally soiled cotton
garments. At 60°C, this is the standard
cotton programme and the most
ecient in terms of water and energy
consumption.
Max. wash load max
Max. drying load 7 kg
TeMperaTure Cold - 60°C
Max. spin speed max
selecTable opTions Delay
Timer, Dry Only
PROGRAMMES AND OPTIONS
In order to select the most suitable programme for the type of load in question, refer to the instructions
indicated on the garments' wash labels.
17
EN
PROGRAMME Wash type and recommendations Wash
symbols
Settings
COTTON
+
PREWASH
For washing heavily soiled towels,
underwear, table and bed linen etc.
in resilient cotton and linen where
a prewash is required. Use only
powder detergent in the “Main wash
compartment”.
Max. wash load max
Max. drying load 7 kg
TeMperaTure Cold - 90°C
Max. spin speed max
selecTable opTions Delay Timer,
Colours 15°, Easy Iron,
Intensive Rinse, Dry Only
SPIN +
DRAIN
Spins the load then empties the water.
For resilient garments.
Max. wash load max
Max. drying load 7 kg
TeMperaTure -
Max. spin speed max
selecTable opTions Delay
Timer, Dry Only
RINSE +
SPIN
Rinses and then spins. For resilient
garments.
Max. wash load max
Max. drying load 7 kg
TeMperaTure -
Max. spin speed max
selecTable opTions Delay
Timer, Intensive Rinse,
Dry Only
SPORT for washing lightly soiled sports
clothing (tracksuits, shorts, etc.); for best
results, we recommend not exceeding
the maximum load. We recommend
using liquid detergent, and adding the
amount suitable for a half-load.
Max. wash load 4 kg
Max. drying load 4 kg
TeMperaTure Cold - 40°C
Max. spin speed 600
selecTable opTions Delay Timer,
Colours 15°, Dry Only
DUVET designed for washing eiderdown
padded items such as double or single
duvets, cushions and anoraks. It is
recommended to load such padded
items in the drum with the edges folded
inwards and not to exceed ¾ of the
drum’s volume. For optimal washing, we
recommend using a liquid detergent.
Max. wash load 3,5 kg
Max. drying load -
TeMperaTure Cold - 30°C
Max. spin speed 1000
selecTable opTions Delay
Timer, Colours 15°, Easy
Iron, Intensive Rinse
RAPID 30’ For washing lightly soiled garments
quickly: this cycle lasts only 30 minutes,
saving time and energy. Maximum
load 4 Kg.
Max. wash load 4 kg
Max. drying load -
TeMperaTure Cold - 30°C
Max. spin speed 800
selecTable opTions Delay
Timer, Colours 15°,
Intensive Rinse (Extra +1)
STEAM
REFRESH
For refreshing garments, neutralised
unpleasant odours and relaxing the
bres by delivering steam into the
drum. The garments will be damp at
the end of the cycle.
Max. wash load 2 kg
Max. drying load -
TeMperaTure -
Max. spin speed -
selecTable opTions Delay
Timer
18
COLOURS 15°
This option helps protect colours by washing
in cold water (15°C). This option uses less
energy to heat the water while still oering
satisfactory wash results.
Suitable for lightly soiled, unstained garments,
depending on the programme previously
selected.
Note: selecting this option together with the
programme oers wash results comparable
to a 40°C cycle at just 15°C.
DELAY TIMER
To set the selected programme to start at a
later time, press the button to set the desired
delay time. To cancel the delayed start, press
the button again until the value “-- h” is shown
on the display.
INTENSIVE RINSE
Option makes it possible to select the desired
rinse type for sensitive skin. Press the button
once for the “Extra +1” level, which makes it
h.
OPTIONS
! If the selected option is not compatible with
the set programme, an error alarm will sound
and the indicator light will ash three times. The
option is not selected.
possible to select an additional rinse after the
standard cycle rinse and remove all traces
of detergent. Press the button again for the
“Extra +2” level, which makes it possible to
select two additional rinses to the standard
cycle rinses; it is recommended for very
sensitive skin. When the button is pressed for
the third time, the “Extra +3” level is set, thus
allowing the selection of 3 rinses in addition to
the standard cycle’s rinses. The option - started
with cycles at a temperature of 40°C - makes
it possible to remove major allergens such
as pollen, cat and dog hair. With cycles at a
temperature higher than 40° a very good level
of antiallergic protection is achieved. Press the
button again to go back to the “Normal rinse”
rinse type.
If the current adjustment can be neither
set nor changed, the display will show “No
Selection” or “No Change”.
EASY IRON
By selecting this option, the wash and spin
cycles will be modied in order to reduce the
formation of creases.
At the end of the cycle the Washer-dryer drum
will rotate slowly; the START/PAUSE button Led
will ash slowly and the wording “Post care”
will appear on the display. To end the cycle
press the START/PAUSE button.
PROGRAMME Wash type and recommendations Wash
symbols
Settings
WASH&DRY 45’ For washing and drying lightly soiled
garments (Cotton and Synthetics)
quickly. This cycle washes and dries a
laundry load of up to 1 Kg in just 45
minutes.
Max. wash load 1 kg
Max. drying load 1 kg
TeMperaTure 30°C
Max. spin speed max
selecTable opTions Delay Timer
WASH&DRY 90’ For washing and drying cotton and
synthetic bre garments quickly. This
cycle washes and dries a laundry load
of up to 2 Kg in just 90 minutes.
Max. wash load 2 kg
Max. drying load 2 kg
TeMperaTure 30°C
Max. spin speed 1200
selecTable opTions Delay
Timer
MIXED For washing lightly to normally soiled
resilient garments in cotton, linen,
synthetic bres and mixed bres.
Max. wash load 5,5 kg
Max. drying load 5.5 kg
TeMperaTure Cold - 40°C
Max. spin speed 1000
selecTable opTions Delay
Timer, Colours 15°, Easy
Iron, Intensive Rinse, Dry
Only
1) Test programme in compliance with standard EN 50229 (Wash): select the programme with a temperature of 60°C.
2) Long cotton programme: set the programme with a temperature of 40°C.
Test programme in compliance with standard EN 50229 (Drying): the greater load (7kg) must be dried by selecting the dryness level.
The remainder of the load must be dried by selecting the dryness level: the load must consist of 3 sheets, 2 pillowcases and 1 hand towel.
19
EN
FUNCTIONS
SELECTOR DIAL • Allows for the programmes to be
selected.
• Turn the dial to make a selection
LOCK BUTTON to lock the control panel, press
and hold the button for
approximately 2 seconds. When the
display visualises “KEY LOCK ON”
the control panel is locked (with the
exception of the button). This
prevents unintentional changes to
programmes, especially with children
near the machine.
To unlock the control panel, press and
hold the button for approximately
2 seconds.
ON/OFF To turn on the washer dryer: press
this button until the Start/Pause
button turns on.
To cancel a programme in progress:
Press and hold the button until the
washer dryer stops.
To shut o the washer dryer at the
end of the programme:
press the button until the lights
turn o.
START/PAUSE • For starting the programme after
having selected the settings
• For pausing a programme in
progress
• For resuming a programme that
was previously paused
20
RULES FOR SEPARATING LAUNDRY
• Fabric type / indications on label (cotton, mixed
bres, synthetic, wool, handwash items)
• Colour (separate coloured garments from whites,
wash new coloured items separately)
• Size (wash items of dierent sizes in the same
load to improve washing ecacy and weight
distribution in the drum)
• Delicates (place small items – such as nylon
stockings – and garments with clasps – such as
braziers – in a laundry bag or in a pillow case with
a zip).
EMPTY POCKETS
• Objects like coins or safety pins can damage the
laundry as well as the washer dryer's drum.
WASH SYMBOLS
ON GARMENT LABELS
The value given in the tub symbol is the maximum
temperature possible for washing the garment.
Normal mechanical action
Reduced mechanical action
Much reduced mechanical action
Hand wash only
Do not wash
CLEAN THE WATER FILTER REGULARLY
• This is needed to prevent the lter from blocking
and preventing the water from draining correctly.
SAVING ENERGY AND PROTECTING THE
ENVIRONMENT
• Keeping within the load limits indicated in the
programme chart will optimise energy, water
and detergent consumption and reduce washing
times.
• Do not exceed the detergent quantities
recommended by the detergent manufacturer.
• Save energy by using a 60°C instead of a 90°C
wash programme, or by using a 40°C instead of
a 60°C wash programme. We recommend using
the 60°C programme for cotton garments,
which is longer, but uses less energy.
• To save energy and time when washing and
drying, select highest spin speed available for
the programme to reduce the residual water
remaining in the garments at the end of the wash
cycle.
HINTS AND TIPS
21
EN
• Keeping within the load limits indicated in the
programme chart will optimise energy, water,
and detergent consumption, and will reduce
washing times.
• Only use the “Prewash” programme for heavily
soiled laundry.
• Pretreat any stains with an appropriate stain
remover, or else dampen any dried-on stains
with water prior to washing, as this will reduce
the need to use a high temperature watch
programme.
• In order to save energy, use a 60°C wash
programme rather than a 95°C programme,
or else use a 40°C programme instead of a
60°C programme. The 60°C programme is
recommended for cotton laundry.
ENERGY SAVING TIPS
• In order to save time and energy, be sure to
select a high spin speed in order to reduce the
amount of water remaining in the garments
before using a dryer.
• Use the “Colours 15°” option for lightly soiled
coloured garments; this will reduce the amount
of energy used to heat the water.
22
CLEANING AND MAINTENANCE
CLEANING THE WASHER DRYER EXTERNALLY
Clean the washer dryer's external parts using a soft
damp cloth.
Do not use generic detergents, glass detergents,
abrasive powders, or other similar products to
clean the control panel, as these could damage the
printed elements.
WARNING
Be sure to turn o the washer dryer and
disconnect it from its electrical power supply
before performing any cleaning or maintenance
operations.
Never use ammable liquids to clean the washer
dryer.
23
EN
Periodically check the integrity of the water
intake hose. If it is found to be damaged, contact
Customer Support or an authorised dealer in order
to obtain a replacement hose.
Based on the type of hose:
If the water intake hose has a transparent cover,
periodically check to make sure that there are no
areas where the colour is more pronounced.In such
cases, the hose may have a leak and may need to
be replaced.
For ood protection hoses: check the safety valve's
inspection window (see the arrow). If it's red, this
means that the ood protection function has
been engaged; in this case, the hose will have to
be replaced with a new one. In order to detach
the hose, press the release button (if present) and
unscrew the hose.
CHECKING THE WATER INTAKE HOSE
24
Connect the A device to a cold water tap using a 3/4
gas threaded attachment, then perform the
connection by screwing the supply hose to the
device.
Before performing the connection, allow the water
to run freely until it is perfectly clear.
For a correct installation of the device, follow the
instructions given in the packaging.
! The device is already adjusted for the correct
operation of the washer-dryer and therefore it is
recommended not to change its settings.
WATER PROTECTION SYSTEM
A
25
EN
CLEANING THE FILTERS IN THE WATER INTAKE HOSE
1. Close the water tap and unscrew the intake
hose.
1
2
2. Thoroughly clean the mesh lter at the end of
the hose using a brush.
3. At this point, manually unscrew the intake hose
from the back of the washer dryer. Using pliers,
extract the mesh lter from the valve on the back
of the washer dryer and clean it.
4. Re-insert the mesh lter. Reconnect the intake
hose to the water tap and the washer dryer. Do
not use tools to connect the intake hose. Open
the water tap and check to make sure that all the
connections have been tightened properly.
2
1
26
CLEANING THE DETERGENT DISPENSER
1. Remove the detergent dispenser by pressing
the release button and pulling on the dispenser at
the same time.
1
2
1
2
2. Remove the insert from the fabric softener
compartment.
3. Wash the components under running water,
taking care to remove all the detergent and fabric
softener residues.
4. Dry with a soft cloth.
5. Re-install the detergent dispenser and close it.
27
EN
WARNING
Make sure that the washer dryer has been shut
o and disconnected from its electrical power
supply before cleaning the water lter or draining
the residual water.If a high temperature wash
programme has recently been used, wait for the
water to cool before draining it.
The water lter should be cleaned regularly in
order to prevent water from remaining inside
the appliance after wash cycles due to lter
obstructions.
CLEANING THE WATER FILTER /
DRAINING THE RESIDUAL WATER
1. Remove the kick panel: Using a screwdriver,
do that which is shown in the following gure.
2. Container for the drained water:
Place a low and wide container under the water
lter in order to collect the residual water.
3. Drain the water:
Slowly turn the lter counter-clockwise until all the
water has come out. Allow the water to ow out
without removing the lter.
Once the container is full, close the water lter by
turning it clockwise. Empty the container. Repeat
the procedure until all the water has been drained.
4. Remove the lter: Place a cotton cloth under
the water lter in order to absorb any small
amounts of residual water. Next, remove the water
lter by turning it counter-clockwise.
28
5. Clean the water lter: remove any residues
from the lter and wash it under running water.
6. Insert the water lter and reinstall the kick
panel: Re-insert the water lter by turning it
clockwise. Turn it as far as it will go; the lter's grip
should be in its vertical position. In order to check
the lter's seal, pour about 1 litre of water into the
detergent dispenser.
Re-install the kick panel.
1
2
29
EN
TRANSPORT AND HANDLING
1. Disconnect the electrical plug and close the
water tap.
2. Check to make sure that the door and the
detergent dispenser are securely closed.
3. Disconnect the intake hose from the water
tap, then disconnect the drain hose. Eliminate all
the residual water from the hoses, and secure them
in such a way that they will not be damaged during
the transport operations.
4. Reapply the transport bolts. Follow the
procedure for removing the transport bolts
described in the Installation Instructions, in the
opposite order.
Important: never transport the washer dryer
without having applied the transport bolts.
WARNING
Do not lift the washer dryer while holding onto its
upper surface.
30
TROUBLESHOOTING
The washer dryer may sometimes not work properly for certain reasons. Before calling the Support
Centre, it is recommended to check to see if the problem can be easily resolved using the following list.
Anomalies: Possible causes / Solution:
The washer dryer does not
turn on.
• Theplugisnotinsertedintotheelectricaloutlet,ornot
enough to make contact.
• Therehasbeenapowerfailure.
• Thedoorisnotfullyclosed.
The wash cycle does not start. • TheON/OFFbuttonhasnotbeenpressed.
• TheSTART/PAUSEbuttonhasnotbeenpressed.
• Thewatertapisnotopen.
• Astartdelayhasbeenset.
The washer dryer does not ll
with water (the message “NO
WATER, Turn tap on” is shown
on the display).
• Thewaterintakehoseisnotconnectedtothetap.
• Thehoseisbent.
• Thewatertapisnotopen.
• Themainswatersupplyhasbeenshuto.
• Thereisnotenoughpressure.
The washer dryer loads and
drains water continuously.
• TheSTART/PAUSEbuttonhasnotbeenpressed.
• Thedrainhosehasnotbeeninstalledat65to100cmfrom
the ground.
• Theendofthedrainhoseisimmersedinwater.
• Thedrainconnectoronthewalldoesnothaveanairvent.
If the problem persists after having performed these
checks, close the water tap, shut o the washer dryer, and
call the Support Centre.If the dwelling is located on one
of the uppermost oors of a building, a siphon eect can
sometimes occur, thus causing the washer dryer to load
and drain water continuously.Special anti-siphon valves are
available on the market to prevent these types of problems.
The washer dryer does not
drain or does not spin.
• Theprogrammedoesnotincludethedrainingfunction:with
certain programmes it must be activated manually.
• Thedrainhoseisbent.
• Thedrainlineisobstructed.
The washer dryer vibrates
excessively during the spin
cycle.
• Atthetimeofinstallation,thedrumwasnotproperly
unlocked.
• Thewasherdryerisnotlevel.
• Thewasherdryerissqueezedbetweenfurnitureandthewall.
The washer dryer leaks water. • Thewaterintakehosehasnotbeentightenedproperly.
• Thedetergentdispenserisclogged.
• Thedrainhosehasnotbeenproperlyfastened.
The machine is locked and the
display ashes, indicating an
error code (e.g. F-01, F-..).
• Shutothemachine,disconnecttheplugfromtheoutlet,
and weight about 1 minute before turning it back on.
If the problem persists, call the Support Centre.
31
EN
Too much foam is formed. • The detergent is not compatible with the washer dryer (it
must bear the wording “for washing machines”, “ for hand
washing and washing machines”, or something similar).
• Thedosagewasexcessive.
The washer dryer does not dry. • Theplugisnotinsertedintotheelectricaloutlet.
• Therehasbeenapowerfailure.
• Thedoorisnotfullyclosed
• Astartdelayhasbeenset.
• TheDRYfunctionissettoits0position.
32
DOOR – HOW TO OPEN IT TO REMOVE THE
LAUNDRY IN THE EVENT OF A MALFUNCTION
1. Drain the residual water as described in the
section titled “Draining the residual water”.
2. Use a screwdriver to remove the screw.
3. Pull the cord downwards as indicated in the
following gure. At this point, the door will unlock
and the laundry can be removed.
4. Afterwards, reattach the cord by inserting the
screw with the help of a screwdriver.
5. Re-install the kick panel.
Shut o the washer dryer and disconnect it
from its electrical power supply. Close the
water tap.
Wait for the drum to come to a complete stop.
If a high temperature program was selected,
wait for the water and the laundry to cool.
33
EN
CUSTOMER SUPPORT SERVICE
BEFORE CONTACTING
CUSTOMER SUPPORT
IF THE PROBLEM PERSISTS,
CONTACT CUSTOMER SUPPORT
Call the number shown on the warranty booklet,
or follow the instructions provided at the
website www.whirlpool.eu
1. Try to resolve any problems you may encounter
on your own by consulting the section titled.
TROUBLESHOOTING
2. Shut o the washer dryer and turn it back on
to see if the problem persists.
Always provide:
A brief description of the problem.
The washer dryer model (see the data plate inside
the door).
Your address and telephone number.
For any repairs that may be required, please
contact an authorised Customer Support Centre
in order to ensure that the repairs are performed
correctly using original spare parts.
Manufacturer:
Whirlpool EMEA S.p.A. - Socio Unico
Via Carlo Pisacane n. 1
20016 Pero (MI)
Italy
34
1. 2.
10 mm - 0,39 inch
150 ml
100 ml
50 ml
INSTALLATION GUIDES
35
EN
3.
2 cm - 0,7 inch
4.
36
6.
7.
5.
8.
max 0,5 cm
max 0,2 inch
37
EN
11.
9. 10.
38
12.
13.
max 100 cm
39 inch
min 65 cm
25 inch
max 100 cm
39 inch
min 65 cm
25 inch
max 100 cm
39 inch
min 65 cm
25 inch
14.
39
EN
n
001
Whirlpool® Registered trademark/TM Trademark of Whirlpool group of companies -
© Copyright Whirlpool Europe s.r.l. 2014. All rights reserved - http://www.whirlpool.eu
195138098.00