Table of Contents
- Copyright
- Table of Contents
- Safety
- Welcome
- Assemble the Scanner
- Installation
- Loading Documents to Scan
- Maintenance
- Appendix A: Regulatory Information
- Appendix B: Compliance Information
Xerox XD-Combo User Manual
Displayed below is the user manual for XD-Combo by Xerox which is a product in the Scanners category. This manual has pages.
Related Manuals
Xerox® Duplex Combo Scanner
Scanner User Guide for Microsoft® Windows.
MAY 2021
05-0978-100
© 2021 Xerox Corporation. All rights reserved. Xerox® is a registered trademark of Xerox
Corporation in the United States and/or other countries. Visioneer is a trademark licensee of
Xerox®. BR24495
Content © 2021 Visioneer, Inc. All rights reserved. The Visioneer brand name and OneTouch®
logo are registered trademarks of Visioneer, Inc.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as
allowed under the copyright laws. Copyright protection claimed includes all forms of matters of
copyrightable materials and information now allowed by statutory or judicial law or hereinafter
granted, including without limitation, material generated from the software programs which are
displayed on the screen such as styles, templates, icons, screen displays, looks, etc.
Document Version: 05-0978-100 (May 2021)
ISIS® is a registered trademark of EMC2® Corporation in the United States and/or other countries.
Adobe®, Adobe® Acrobat®, Adobe® Reader®, and the Adobe® PDF logo are registered
trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Post-It® is a registered trademark of 3M in the United States and/or other countries.
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows™ and SharePoint® are
registered trademarks of Microsoft Corporation.
ZyINDEX is a registered trademark of ZyLAB International, Inc. ZyINDEX toolkit portions,
Copyright © 1990-1998, ZyLAB International, Inc.
TWAIN™ is a trademark of TWAIN Working Group.
Intel® and Pentium® are trademarks of Intel Corporation in the United States and/or other
countries.
Universal Serial Bus is a trademark of USB Implementers Forum, Inc. (USB-IF).
Kensington® is a registered trademark of ACCO Brands Corporation.
All other products mentioned herein may be trademarks of their respective companies and are
hereby acknowledged.
Changes are periodically made to this document. Changes, technical inaccuracies, and
typographic errors will be corrected in subsequent editions. Information is subject to change
without notice and does not represent a commitment on the part of Visioneer.
The software described is furnished under a licensing agreement. The software may be used or
copied only in accordance with the terms of such an agreement. It is against the law to copy the
software on any medium except as specifically allowed in the licensing agreement. No part of this
document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, or
translated to another language, for any purpose other than the licensee's personal use and as
specifically allowed in the licensing agreement, without the express written permission of
Visioneer.
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii)
of the Rights in Technical Data and Computer Software Clause 52.227-FAR14. Material scanned
by this product may be protected by governmental laws and other regulations, such as copyright
laws. The customer is solely responsible for complying with all such laws and regulations.
User Guide iv
Table of Contents
1 Safety ....................................................................................................................... 1-1
Safety Introduction ...........................................................................................................................1-1
Operational Safety Information..................................................................................................1-1
Electrical Information.......................................................................................................................1-2
Warning - Electrical Safety Information......................................................................1-2
Electrical Supply......................................................................................................................1-2
Disconnect Device .................................................................................................................1-3
Emergency Power Off.......................................................................................................................1-3
Maintenance Information..............................................................................................................1-3
Product Safety Certification ..........................................................................................................1-3
Environmental Health and Safety Contacts...........................................................................1-4
2 Welcome ................................................................................................................. 2-1
What’s in the Box ...............................................................................................................................2-1
System Requirements.......................................................................................................................2-2
Documentation ...................................................................................................................................2-2
Xerox® Duplex Combo Scanner Features...............................................................................2-3
3 Assemble the Scanner....................................................................................... 3-1
Connect the Power Cord..................................................................................................................3-2
4 Installation............................................................................................................. 4-1
Install the Software and Connect the Scanner .....................................................................4-1
Installing the Scanner Driver.............................................................................................4-4
Connect the USB Cable and Turn on the Power.......................................................4-5
Installing Visioneer OneTouch.........................................................................................4-7
Installing Additional Applications...............................................................................................4-8
View the User Guides........................................................................................................................4-9
Register Your Scanner....................................................................................................................4-10
5 Loading Documents to Scan .......................................................................... 5-1
Scanning from the Automatic Document Feeder (ADF) ..................................................5-1
Supported Document Types .............................................................................................5-1
Documents to Avoid Scanning.........................................................................................5-1
Unsupported Document Types........................................................................................5-2
Preparing Documents for Scanning...............................................................................5-2
Loading Documents..............................................................................................................5-3
Scanning from the Flatbed Glass ................................................................................................5-3
Xerox® Duplex Combo Scanner Table of Contents
User Guide
Supported Document Types .............................................................................................5-3
Loading Documents..............................................................................................................5-3
Scanning Interfaces ..........................................................................................................................5-5
6 Maintenance ......................................................................................................... 6-1
Safety Precautions .............................................................................................................................6-1
Hardware Properties..........................................................................................................................6-1
Device Settings........................................................................................................................6-2
Driver Settings .........................................................................................................................6-3
Clearing Paper Jams..........................................................................................................................6-3
Cleaning the Scanner........................................................................................................................6-4
Cleaning Inside the Automatic Document Feeder .................................................6-4
Cleaning the Scanner Glass...............................................................................................6-6
Calibrating Your Scanner ................................................................................................................6-6
Calibration Error......................................................................................................................6-8
Replacing the ADF Pad Assembly................................................................................................6-8
Troubleshooting...............................................................................................................................6-11
Error Light Troubleshooting Codes..............................................................................6-13
Uninstalling Your Scanner ...........................................................................................................6-14
Xerox® Duplex Combo Scanner Specifications.................................................................6-16
Xerox® Duplex Combo Scanner Parts List ...........................................................................6-17
7 Appendix A: Regulatory Information ......................................................... 7-1
Basic Regulations................................................................................................................................7-1
United States (FCC Regulations).....................................................................................7-1
European Union......................................................................................................................7-1
Turkey (RoHS Regulation) ..................................................................................................7-2
Copy Regulations................................................................................................................................7-2
United States ...........................................................................................................................7-2
Canada .......................................................................................................................................7-3
Other Countries.......................................................................................................................7-4
8 Appendix B: Compliance Information ....................................................... 8-1
Product Recycling & Disposal........................................................................................................8-1
USA & Canada.........................................................................................................................8-1
European Union......................................................................................................................8-1
ENERGY STAR for the USA..............................................................................................................8-1
User Guide 1-1
Safety Introduction
Notices and Safety
Please read the following instructions carefully before operating the machine and refer to them as
needed to ensure the continued safe operation of your machine.
Your Xero x® product and supplies have been designed and tested to meet strict safety
requirements. These include safety agency evaluation and certification, and compliance with
electromagnetic regulations and established environmental standards.
WARNING:
The safety and environment testing and performance of this product have been verified using
Xerox® materials only. Unauthorized alterations, which may include the addition of new
functions or connection of external devices, may impact the product certification. Please
contact your Xerox representative for more information.
Operational Safety Information
Your Xero x® equipment and supplies have been designed and tested to meet strict safety
requirements. These include safety agency examination, approval, and compliance with
established environmental standards.
To ensure the continued safe operation of your Xerox® equipment, follow these safety guidelines
at all times:
Do these:
• Always follow all warnings and instructions that are marked on or supplied with the
equipment.
• Always use materials specifically designated for this product, the use of other materials may
result in poor performance and create a hazardous situation. Do not use aerosol cleaners,
they may be explosive and flammable under certain conditions.
• Always exercise care when moving or relocating equipment.
• Always locate the machine on a solid support surface that has adequate strength to support
the weight of the machine.
• Always locate the machine in an area that has adequate ventilation and room for servicing.
• Always unplug this equipment from the electrical outlet before cleaning.
Note: Your Xerox® machine is equipped with an energy saving device to conserve power when the
machine is not in use. The machine may be left on continuously.
Do not do these:
• Never use a ground adapter plug to connect the equipment to a power outlet that lacks a
ground connection terminal.
1. Safety
Xerox® Duplex Combo Scanner Safety
1-2 User Guide
• Never attempt any maintenance function that is not specifically described in this
documentation.
• Never remove covers or guards that are fastened with screws. There are no operator
serviceable areas within these covers.
• Never locate the machine near a radiator or any other heat source.
• Never override or “cheat” any of the electrical or mechanical interlock devices.
• Never place this equipment where people might step on or trip on the power cord.
Caution: This device is not intended for use in the direct field of view at visual display
workplaces
To avoid incommoding reflections at visual display workplaces this device must not be placed in
the direct field of view.
Electrical Information
Warning - Electrical Safety Information
1. The power receptacle for the machine must meet the requirements stated on the data plate
on the rear of the machine. If you are not sure that your electrical supply meets the
requirements, please consult your local power company or an electrician for advice.
2. The socket outlet shall be installed near the equipment and shall be easily accessible.
3. Use the power cable that is supplied with your machine. Do not use an extension cord or
remove or modify the power cord plug.
4. Plug the power cable directly into a correctly grounded electrical outlet. If you are not sure
whether or not an outlet is correctly grounded, consult an electrician.
5. Do not use an adapter to connect any Xerox® equipment to an electrical outlet that lacks a
ground connection terminal.
6. Do not place this equipment where people might step or trip on the power cable.
7. Do not place objects on the power cable.
8. Do not override or disable electrical or mechanical interlock devices.
9. Do not push objects into slots or openings on the machine. Electrical shock or fire may result.
Electrical Supply
• This product shall be operated from the type of electrical supply indicted on the product’s
data plate label. If you are not sure that your electrical supply meets the requirements, please
consult your local power company for advice.
• Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet
checked by a qualified electrician.
Safety Xerox® Duplex Combo Scanner
User Guide 1-3
WARNING: This equipment must be connected to a protective earth circuit
This equipment is supplied with a plug that has a protective earth pin. This plug will only fit into
an earthed electrical outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace the outlet.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the side of the
machine as a plug-in device. To remove all electrical power from the equipment, disconnect the
power cable(s) from the electrical outlet.
Emergency Power Off
If any of the following conditions occur, turn off the machine immediately and disconnect the
power cable(s) from the electrical outlet(s).
• The equipment emits unusual odors or makes unusual noises.
• The power cable is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device has been tripped.
• Liquid is spilled into the machine.
• The machine is exposed to water.
• Any part of the machine is damaged.
Maintenance Information
1. Any operator product maintenance procedures will be described in the user documentation
supplied with the product.
2. Do not carry out any maintenance on this product which is not described in the customer
documentation.
3. Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor
performance of the equipment, and could cause a dangerous condition.
4. Use supplies and cleaning materials only as directed in this manual.
5. Do not remove covers or guards that are fastened with screws. There are no parts behind
these covers that you can maintain or service.
6. Do not perform any maintenance procedures unless you have been trained to do them by an
authorized local dealer or unless a procedure is specifically described in the user manuals.
Product Safety Certification
This product is certified by the following Agency using the Safety standards listed:
Standard
UL60950-1 (USA)
CSA 22.2 No. 60950-1 (Canada)
IEC 60950-1, IEC 62368-1
Xerox® Duplex Combo Scanner Safety
1-4 User Guide
Environmental Health and Safety Contacts
Contact Information
For more information on Environment, Health, and Safety in relation to this Xerox® product and
supplies, please contact the following customer help lines:
North America & Europe (Phone): 1-800-ASK-XEROX
North America & Europe (Fax): 1-585-422-8217
User Guide 2-1
Your n ew Xerox® scanner can quickly scan stacks of documents with the Automatic Document
Feeder (ADF), or single pages on the Flatbed glass.
What’s in the Box
Before proceeding, check the contents of the box. If items are missing or damaged, contact the
dealer where you purchased the scanner.
Xerox® Duplex Combo Scanner Quick Install Guide Technical Support Card
USB Cable Power Supply Power plug adapter
Spare ADF Pad Calibration Page
2. Welcome
Xerox® Duplex Combo Scanner Welcome
2-2 User Guide
System Requirements
*Refer to your Windows documentation for instructions on setting the color quality and resolution for the monitor.
Documentation
The following printed documentation is provided in the box:
•Installation guide—abbreviated scanner setup and installation instructions.
•Technical support card—contact information for technical support and customer service,
and a brief overview of our standard product warranty.
The following soft-copy documentation is available on the installation disc:
•Scanner user guide—instructions for scanner setup, installation, operation, maintenance,
safety, and warranty.
•OneTouch scanning guide—instructions for configuring and scanning using OneTouch.
•TWAIN scanning guide—instructions for accessing and scanning using the TWAIN
interface.
•Patch code sheets—use with an application that supports detection of patch code data
when using the TWAIN interface. The patch code page layouts have been specifically
designed for your scanner. The file contains Patch 1 layouts for A4 and U.S. Letter size pages.
Make sure you print the correct page size for the paper in your printer. Also, make sure the
application you are using is not set to automatically scale the page to fit on the paper in your
printer.
Minimum Recommended
Processor 2Ghz Intel Core 2 Duo 2.0GHz i3 6th generation
USB Port An available Universal Serial Bus
(USB) 2.0 port
An available Universal Serial Bus (USB)
2.0 port
OS Microsoft® Windows® operating
system:
• 32-bit or 64-bit Windows 7
(Service Pack 1)
• 32-bit or 64-bit Windows 8 /
8.1
• 32-bit or 64-bit Windows 10
Microsoft® Windows® operating
system:
• 64-bit Windows 7 (Service Pack 1)
• 64-bit Windows 8 / 8.1
• 64-bit Windows 10
RAM 2 gigabyte (GB) of internal
memory (RAM)
4 gigabyte (GB) of internal memory
DDR4(RAM)
Hard Drive Space • 350 MB for the scanner driver
• 1 GB for Visioneer OneTouch
• 1 to 2 GB for each additional
application
• 350 MB for the scanner driver
• 1 GB for Visioneer OneTouch
• 1 to 2 GB for each additional
application
Monitor* Color quality of 16-bit or 32-bit
Resolution set to at least 1024 x
768 pixels
Color quality of 16-bit or 32-bit
Resolution set to at least 1024 x 768
pixels
Welcome Xerox® Duplex Combo Scanner
User Guide 2-3
Xerox® Duplex Combo Scanner Features
1. Input Tray—Holds the documents in the Automatic Document Feeder for scanning.
2. Paper Guides—Guides adjust to support various document widths.
3. Automatic Document Feeder—Feeds documents through the scanner during scanning.
4. Scanner Lid—Lift lid to place an item on the flatbed glass for scanning.
5. Control panel—OneTouch scanning controls.
–LED Number—The selected OneTouch function for the Scan button.
–Function buttons—Selects the scan setting for the OneTouch buttons. Press the up or
down arrow to cycle through the settings.
–Simplex Button—Press to scan single-sided documents.
–Duplex Button—Press to scan double-sided documents.
–Status light / Power Button—Turns the scanner’s power off and indicates the scanner’s
status.
6. Output Tray—Holds documents after being scanned through the Automatic Document
Feeder.
7. Lock—Locks or unlocks the scanning head; located on the underside of the scanner.
8. Power jack—Connects the power cord to the scanner.
9. Universal Serial Bus (USB) port—Connects the scanner to the computer.
1
2
3
45
6
89
7
Xerox® Duplex Combo Scanner Welcome
2-4 User Guide
User Guide 3-1
1. Remove the scanner from its protective foam and plastic bag.
2. Remove all shipping tape from the top and bottom of the scanner.
3. Lift the scanner lid. Remove any tape and protective foam from around or on the flatbed
glass.
4. Open the automatic document feeder cover and remove any tape or protective foam from
inside the feeder. Close the feeder cover when you are finished.
3. Assemble the Scanner
Xerox® Duplex Combo Scanner Assemble the Scanner
3-2 User Guide
5. Slide the locking tab on the bottom of the scanner to its unlocked position. The scanner will
not scan when locked.
Connect the Power Cord
Note: Only use the power supply (WA-36A24R made by APD) included with your scanner.
Connecting any other type of power supply may damage your scanner, and will void its warranty.
Assemble the power adapter:
1. Select the power plug adapter that is appropriate for the wall outlet in your country.
2. Slide the power plug adapter into the power supply base.
3. Plug the power supply into the power port on the scanner.
U.K., North America, Europe
Assemble the Scanner Xerox® Duplex Combo Scanner
User Guide 3-3
4. Plug the power cord into the power supply and into a wall outlet.
Xerox® Duplex Combo Scanner Assemble the Scanner
3-4 User Guide
User Guide 4-1
Please make sure of the following before you begin installation:
• If you are prompted to reboot during installation, please select "No". Finish installing the rest
of the software, then close all open windows and reboot your computer.
• The information in this guide may cover software not provided with the scanner you
purchased. Please disregard any information about the software not applicable to your
scanner.
• If your computer has AntiVirus or AntiSpyware software running, you may encounter alerts or
messages during installation asking you to allow the installation to proceed. Although the
messages will differ based on the software your computer is running, in each case you should
allow the installation to proceed if that option is available. Alternatively, you can turn off the
AntiVirus or AntiSpyware software before installing your scanner, but if you do, make sure to
turn it back on again when installation is finished.
• If your computer is running Windows 7 or later, you may see the Windows User Account
Control screen asking you to confirm system changes. Click the Yes button to allow the
installation to proceed.
Install the Software and Connect the Scanner
1. Start Microsoft Windows and make sure that no other applications are running.
2. Go to www.visioneer.com/install.
3. Launch the installer, once the download is complete.
4. Plug the USB cable into the USB port on the scanner then into a USB port on the computer.
Turn on the scanner power.
5. Click OK.
4. Installation
Xerox® Duplex Combo Scanner Installation
4-2 User Guide
6. Select your scanner from the list.
7. Click Proceed.
8. The Select Language window opens. Click the drop-down menu arrow and select the
language to use. Click OK.
9. Make sure the boxes for Scanner Driver and Visioneer OneTouch are selected, as well as any
other applications you want to install.
Note: The software provided with your scanner may differ slightly from the list shown in the
window.
10. If a version of the software is already installed on the system, the option will be greyed out.
However, if there is a newer version available, it will be possible to download and install.
11. The software will have to first be downloaded by clicking Download. The total size of the
download is shown at the bottom.
Installation Xerox® Duplex Combo Scanner
User Guide 4-3
12. After the download has begun, it can be paused. If changes to the selections are required, it is
necessary to click Reset while the download is paused. This will allow the settings to be
changed.
Note: Clicking the Reset button in either the Main menu or the Install menu will cause both
partially completed and previously downloaded files to be deleted. In order to be installed
they will have to be downloaded again.
13. Once all software has been downloaded, click Install.
Installing the Scanner Driver
The scanner driver installation will start first.
1. The Welcome screen for the scanner driver Setup Wizard opens. Click Next.
Note: there may be an option in the installation window to remove any current scanning
profiles. You will see this prompt if you already have a previous version of the scanner driver
installed. Select the option in the installation window only if you want the existing profiles
removed.
2. On the Xerox License Agreement window, read the license agreement. If you accept the
terms, select I Agree then click Next.
If you choose not to accept the license agreement, click Cancel. Click Close on the
Installation Interrupted window.
3. The software will now be installed.
Xerox® Duplex Combo Scanner Installation
4-4 User Guide
4. Stop when you see the “Complete the installation by connecting your hardware” window. Do
not click OK yet. Leave the window open and proceed to the next section.
Note: If you do not see this on-screen diagram for connecting the scanner, stop and follow the
instructions below.
Connect the USB Cable and Turn on the Power
If you did not connect the scanner earlier, proceed with the instructions below.
1. Remove any tape from the USB cable.
2. Plug the USB cable into the USB port on the scanner then into a USB port on the computer.
Check your computer’s manual for USB port locations.
If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force
the plug into either connection.
Installation Xerox® Duplex Combo Scanner
User Guide 4-5
3. Turn on the scanner power.
The status light comes on and flashes indicating that the scanner is receiving power.
Your computer recognizes that a scanner has been plugged into the USB port and
automatically loads the appropriate software to run the scanner.
4. When you’re certain that the software has completely loaded, return to the “Complete the
installation by connecting your hardware” window.
5. Click OK to complete the installation process.
Xerox® Duplex Combo Scanner Installation
4-6 User Guide
6. Click Close on the Installation Complete window to close and exit the driver installer.
Installing Visioneer OneTouch
The Visioneer OneTouch software installation will start automatically after you click Close on the
driver Installation Complete window.
1. Click Next on the Welcome to the OneTouch Setup Wizard.
Note: there may be an option in the installation window to remove any current scanning
profiles. You will see this prompt if you already have a previous version of OneTouch installed.
Select the option in the installation window only if you want the existing profiles removed.
2. On the Visioneer License Agreement window, read the license agreement. If you accept the
terms, select I Agree then click Next.
If you choose not to accept the license agreement, the installation will terminate and
OneTouch will not be installed.
3. Click Close on the Installation Complete window to close and exit the software installer.
Installation Xerox® Duplex Combo Scanner
User Guide 4-7
4. After OneTouch is installed, a splash screen will be displayed while it initializes and searches
for installed scanners. Please wait for this screen to disappear before attempting to use
OneTouch.
Note: If you selected other software to install during installation, that software will automatically
start after you click Close on the Installation Complete window. Follow the instructions on-screen
to install each application you selected.
Installing Additional Applications
1. Return to the Main menu and click Install software.
2. If a version of the software is already installed on the system, the option will be greyed out.
However, if there is a newer version available, it will be possible to download and install.
3. The software will have to first be downloaded by clicking Download.
4. Once all software has been downloaded, click Install.
5. Follow the instructions on the screen to install each of the additional applications.
View the User Guides
1. Launch Visioneer Update, go to the main menu and click on View user guides.
2. Click on View scanner documentation to access the scanner user guide and scanning guides
for OneTouch and TWAIN.
Xerox® Duplex Combo Scanner Installation
4-8 User Guide
–Scanner user guide—Instructions for scanner setup, installation, operation,
maintenance, safety, and warranty
–OneTouch scanning guide—Instructions for configuring and scanning using OneTouch
–TWAIN scanning guide—Instructions for accessing and scanning using the TWAIN
interface
Click on View software documentation to access the user guides for the software
applications provided with the scanner.
From either of these user guide windows, click on the User guide menu button to return to
the main user guide window, then select the other documentation section to view the user
guides.
3. Click the links of the guides you want to view.
4. When you’re finished, click Main menu to return to the Main menu window and click Exit.
Register Your Scanner
Registering your scanner is important as it provides you with access to our free telephone support
service. Registration also gives you free access to software updates for your scanner.
You will need an active internet connection to register your scanner. If you do not have internet
access you can contact our customer service department to register the scanner. Please refer to
the Technical Support Card, that you received with the scanner, for our customer service contact
information.
1. Open an Internet Explorer window, or any other Internet browser you have installed on your
computer.
2. In the web address field type www.xeroxscanners.com.
3. Press Enter on your computer’s keyboard or click the option on screen to go to the web
address.
4. When the Xerox® scanners web page loads click on Register Your Product.
5. Fill in the registration form, all required fields have an asterisk (*).
A valid email address is required for registration.
6. You will be asked to enter the serial number for the scanner, it is located on the back or
underside of the scanner.
7. After filling in the form, click on Submit Your Registration to complete the registration.
Scanner documentation window
User Guide 5-1
Always remove any staples or paper clips from documents before inserting them into the scanner.
Staples and paper clips can jam the feed mechanism and scratch the internal components. Also
remove any labels, stickers, or Post-It™ notes that may come off during the scanning process and
get stuck in the scanner. Misuse as described here will void your scanner’s warranty.
Please go to www.xeroxscanners.com, select your product, and then click the “Warranty Program”
link to view the warranty terms and conditions for your scanner.
Scanning from the Automatic Document Feeder (ADF)
Supported Document Types
You can scan the following types of documents and cards with this scanner.
• Maximum amount of paper in the input tray
– Approximately 35 pages of 20 lb (75–80 g/m2) new printer paper
•Document size
– Minimum size (width x length) – 3 x 5.9 inches (76 x 150 mm)
– Maximum size (width x length) – 8.5 x 14 inches (216 x 356 mm)
– Maximum length with long document enabled
– 118 inches (2997 mm) up to 300dpi
– 59 inches (1499mm) at 400dpi
We recommend scanning one page at a time when the documents you are scanning are
longer than 14 inches (356 mm).
• Valid mixed document size sets without long document enabled
– Scanner minimum to maximum
Arrange the documents so that all items are centered in the stack. The document sensor,
paper separation, and feed rollers are located in the middle of the paper path. If smaller
items are offset from the center they will not be detected. This will cause feeding issues
and paper jams.
• Paper thickness between 16–28 lb paper (60–105 g/m2)
5. Loading Documents to Scan
Xerox® Duplex Combo Scanner Loading Documents to Scan
5-2 User Guide
Documents to Avoid Scanning
The documents in this list can be scanned, but please note that scanning documents of this type
will reduce the life of the scanner. Maintenance will be required more often and replaceable parts
will wear faster. These types of documents will jam more frequently and damage to the original
documents may occur. If you do choose to scan these document types, do not scan large batches.
This type of use is not covered under the scanner warranty and alters replacement parts life
expectancy.
We recommend you limit the amount or completely avoid scanning documents that are in this list.
• Curled, wrinkled or folded documents may cause paper jams or multiple pages being fed
through the scanner at one time.
• Perforated or punched paper that could tear when the separation roller engages.
• Coated paper or photographs where the coating can flake off during scanning and leave
residue in the scanner.
• Extremely smooth, shiny, or highly textured paper may cause the paper feed rollers to slip
across the page and cause the scanner to report a paper jam.
• Carbonless copy paper may tear while being fed through the scanner and the pressure of the
rollers may leave streaks on the page. The chemical coating on this paper will rub off on the
rollers during the scan process, increasing the frequency of miss-feeds and paper jams.
• Partially transparent paper such as tracing paper as any images from the opposite side of the
page or black background will appear in the scanned images.
Unsupported Document Types
Do not scan the following types of documents as they may cause damage to the scanner.
• Items outside of the specified supported sizes, thickness, and weight defined in this
document.
• Non-rectangular or irregularly shaped paper will cause the scanner to detect and report
document skew errors or paper jams.
• Carbon paper that will leave residue in the scanner and on the rollers that will transfer to the
next set of documents scanned.
• Documents with hard items attached such as paper clips, binder clips, and staples.
• Documents with wet ink or white-out.
• Thermal or photosensitive paper.
• Overhead projector sheets, plastic film, camera film, and any other type of transparent or
partially transparent plastic item.
• Documents that have been glued together.
• Cloth or metallic sheets.
Loading Documents to Scan Xerox® Duplex Combo Scanner
User Guide 5-3
Preparing Documents for Scanning
• Fan the documents to make sure all pages in the stack are separated.
• Bend and then flatten the document stack to make sure the horizontal edges are aligned to
help prevent paper from skewing while being pulled through the scanner.
• Pinch the ends to align the leading edges slantwise to help prevent multiple pages from being
fed through at a single time.
Loading Documents
1. Adjust the paper guides for the width of the documents being scanned. If needed, pull out
the input tray extension and flip up the paper stop.
2. Load the documents face up with their tops into the Automatic Document Feeder.
3. You can now scan the documents using the scanner buttons, OneTouch, or one of the other
scanning interfaces.
Xerox® Duplex Combo Scanner Loading Documents to Scan
5-4 User Guide
Scanning from the Flatbed Glass
Supported Document Types
You can scan the following types of documents with this scanner.
•Document size
– Minimum size (width x length) – 0.5 x 0.5 inches (13 x 13 mm)
– Maximum size (width x length) – 8.5 x 11.70 inches (216 x 297 mm)
Loading Documents
Use the Flatbed glass to scan documents on light weight paper, such as credit card receipts, or
items that cannot be scanned with the Automatic Document Feeder, such as pages in a book or
plastic cards.
Note: You must remove any pages from the Automatic Document Feeder before scanning from
the Flatbed glass. If pages are in the Automatic Document Feeder, they will be scanned instead of
the page on the Flatbed glass.
1. Open the scanner lid and place the page on the scanner glass, face down.
2. Align the item with the arrow on the reference frame then close the cover.
3. You can now scan the document using the scanner buttons, OneTouch, or one of the other
scanning interfaces.
Loading Documents to Scan Xerox® Duplex Combo Scanner
User Guide 5-5
Scanning Interfaces
•Scanner Control Panel—When you press the Simplex or Duplex button on the scanner, the
scanner starts scanning using the settings for the current LED number. The scanned image is
then sent to a destination on your computer or network drive.
OneTouch Button Panel—Use this scan option when you want to scan from the computer
screen. Scanning from the on-screen OneTouch Button Panel is the same as selecting a
scanning option on the scanner, except you click an icon that represents the function.
Please see the OneTouch Scanning Guide on the installation disc for instructions. You can also
click the Help button in the OneTouch Properties window to open the instructions in an
Internet browser.
Scanner Control Panel OneTouch Button Panel
Xerox® Duplex Combo Scanner Loading Documents to Scan
5-6 User Guide
•TWAIN and WIA Interface—this option uses your scanner’s TWAIN interface to scan. Select
scanning options before scanning, put the document in the scanner, then click the Scan
button in the TWAIN interface window.
Please see the TWAIN Scanning Guide on the installation disc for instructions. You can also
click the Help button in the TWAIN interface to open the instructions in an Internet browser.
•ISIS Interface—This option uses the ISIS interface for scanning. Please refer the user
manual for your ISIS scanning application for instructions on scanning with the ISIS interface.
User Guide 6-1
This section contains information about maintenance, troubleshooting, uninstalling, scanner
specifications, and spare parts.
Safety Precautions
When servicing the scanner you should take the following precautions to ensure your safety and
prevent damage to the scanner.
Do These
• Wear protective gloves when cleaning the scanner with Isopropyl rubbing alcohol. Rubbing
alcohol may irritate sensitive skin.
• Only perform scanner maintenance as described in this chapter.
• Keep the scanner and cleaning supplies away from any open flame or heat source as any
form of alcohol is flammable.
• Always read the instructions in each section carefully, the instructions are specific to the part
you are installing or servicing.
• Move the scanner to an area that has adequate room for opening the scanner.
• If your scanner has a power cord and/or power switch, always turn off the scanner and unplug
the power cord before performing maintenance, unless the maintenance instructions below
specifically state to leave the scanner plugged in and powered on.
• Always unplug the USB cable from the scanner before performing maintenance, unless the
maintenance instructions below specifically state to leave the scanner plugged in.
• Wear an anti-static strap to prevent electrostatic discharge when touching metal
components.
• Keep all cleaning supplies, scanner parts and accessories out of the reach of children.
Do Not Do These
• Never attempt installation of any part not described in this manual.
• Never service the scanner near a radiator or any other heat source.
• Never use aerosol sprays or compressed air, or attempt to lubricate parts with an oil or silicon
spray.
• Never service the scanner in an area where there are open liquid containers.
• Never pour or spill liquid on the scanner or any of its components.
Hardware Properties
You can use the scanner’s properties page to keep track of scanner maintenance, change some of
the hardware options, configure the scanner interface behavior, and adjust application options
that may be available for your scanner.
6. Maintenance
Xerox® Duplex Combo Scanner Maintenance
6-2 User Guide
To open the scanner hardware properties page:
•Windows 7 or later—from the Windows Control Panel, open Hardware and Sound and then
Devices and Printers. Right-click on the scanner and then select Scan properties from the
list.
Device Settings
The Device Settings tab shows the hardware information for your scanner. The options on the
Device Settings tab will be available based on whether or not the scanner hardware supports the
feature. Some features described herein may not be available for the current scanner. Please
disregard any information about features that you do not see in the interface for your scanner.
Scanner Details
•Firmware version—this is the scanner’s hardware processor version number.
•Serial number—the scanner’s unique identification number.
•LLD version—the scanner’s base driver version. This is not the OneTouch software revision,
TWAIN or WIA driver versions.
•Driver version—this is the version of the scanner’s TWAIN driver.
Scanner Settings
•Counters—click the reset button next to the counter you want to set back to 0.
Power Settings
•Sleep mode—sleep mode is the low-power state when the scanner is not in use. You can
adjust the amount of time you want the scanner to wait before it goes into low power.
Click the green enter button to save any changes in the Sleep mode field.
Click the red reset button to reset to the default timeout value.
•Power off—input the number of minutes you want the scanner to wait before it turns itself
off.
Click the green enter button to save any changes in the power off field.
Click the red reset button to reset to the default timeout value.
Maintenance Xerox® Duplex Combo Scanner
User Guide 6-3
Driver Settings
The options in this panel are for configuring how the TWAIN interface will behave in some
scenarios. Please see the TWAIN scanning guide on the installation disc for instructions.
Clearing Paper Jams
If your scanner stops scanning due to a paper jam in the Automatic Document Feeder, a warning
opens after a few moments.
1. Open the Automatic Document Feeder cover.
Do not attempt to remove a jammed page with the scanner closed.
Xerox® Duplex Combo Scanner Maintenance
6-4 User Guide
2. Remove the jammed page from the scanner.
3. Close the ADF cover. Carefully press down on the ADF cover until it locks in place with a “click”.
To reduce the number of paper jams, smooth and straighten the paper before scanning, adjust
the guides to the paper size, and insert the paper evenly into the ADF.
Cleaning the Scanner
Regular maintenance of your scanner can help to ensure continual optimal performance.
Using a soft, lint-free cloth, wipe down all plastic surfaces on the scanner.
Cleaning Inside the Automatic Document Feeder
Cleaning the inside of the scanner helps to keep your scanner operating at optimum performance.
You should clean the inside of the scanner at least once a week or after 1,000 pages have been
scanned. If you are getting frequent paper jams, multiple pages feeding at the same time, or
you’re seeing lines in the scanned image, it is time to clean the scanner.
Note: Be careful when cleaning the rollers. All of the rollers, except the free rollers, are designed to
rotate in one direction only. Do not force the roller to rotate in the opposite direction. Forcing the
roller to rotate will damage it, and cause the scanner to feed pages incorrectly.
1. Wet a soft cloth with some Isopropyl rubbing alcohol (70%).
Maintenance Xerox® Duplex Combo Scanner
User Guide 6-5
2. Open the Automatic Document Feeder cover.
3. Wipe the feed roller from side to side. Rotate the roller to clean its entire surface.
4. Close the ADF cover. Carefully press down on the ADF cover until it locks in place with a “click”.
Xerox® Duplex Combo Scanner Maintenance
6-6 User Guide
5. Wipe clean the glass strip on the underside of the duplex lamp module. Wipe clean the glass
strip in the body of the scanner.
Cleaning the Scanner Glass
Scanning items that have excessive amounts of dirt or dust may dirty the glass. To ensure the best
quality scanned item, wipe the scanner glass with a soft, dry, clean cloth to rid the glass of dust or
other debris.
If any residue remains after wiping the glass with a dry cloth, try adding a few drops of Isopropyl
alcohol (rubbing alcohol) to the cloth and wipe off the residue.
Calibrating Your Scanner
If your scanned images have black or colored vertical lines and cleaning does not resolve the
problem, this may be a sign that you need to perform a calibration.
Maintenance Xerox® Duplex Combo Scanner
User Guide 6-7
The scanner should be calibrated as part of your monthly maintenance of the scanner. If the
scanner is used daily you may need to calibrate the scanner more often. You will need to have the
calibration page ready.
Caution: do
not
attempt to calibrate the scanner with any other type of document
(i.e. white paper or a copy of the calibration page).
The calibration routine will fail and indicate the failed calibration by flashing a red LED on the
scanner. A calibration page was included with your scanner, if you do not have one available,
you can order a replacement from the Parts & Accessories page for your scanner at
www.xeroxscanners.com.
To calibrate the scanner:
1. Open the scanner’s hardware properties page as described on page 6-1.
2. Click on the Device Settings tab.
3. Click on the Calibrate button to start the calibration utility.
Xerox® Duplex Combo Scanner Maintenance
6-8 User Guide
4. Place the calibration page in the scanner as shown in the following image.
5. The scanner pulls in the calibration page and feeds it slowly through the paper path.
6. When calibration is complete the scanner will clear the calibration page out of the scanner.
Remove the calibration page when the utility prompts you to. Do not forcefully pull the page
out of the scanner, the scanner will release the page when it has fully exited out of the
scanner.
Calibration Error
If there is an error during calibration or if the scanner should disconnect during calibration. The
error will display on-screen. If you see a message that calibration failed, please run the calibration
utility again.
Note: if you attempted to calibrate the scanner with any page other than the calibration page
provided with your scanner, the calibration routine will fail. You will need to power cycle the
scanner, through unplug then re-plug of the USB cable, and then restart the calibration.
Replacing the ADF Pad Assembly
Problems with documents feeding into the ADF is an indication that the pad is wearing thin. The
usage life of the ADF pad varies by what type of documents are generally scanned. Scanning large
batches of heavily textured paper and embossed plastic cards will cause the ADF pad to wear
faster. Large continuous batch scanning will also cause the ADF pad to wear faster. The ADF pad
can be used to scan up to 30,000 pages.
You received a replacement pad in the original scanner box, you can also order a new one.
Replacement parts can be purchased from the Parts & Accessories page for your scanner at
www.xeroxscanners.com.
Maintenance Xerox® Duplex Combo Scanner
User Guide 6-9
To replace the ADF Pad:
1. Open the Automatic Document Feeder cover.
2. Squeeze the plastic clamp that holds the pad assembly in place.
3. Rotate the ADF pad until it is able to slide free.
4. Lift the pad up and out of the scanner.
Xerox® Duplex Combo Scanner Maintenance
6-10 User Guide
5. Remove the tensions spring that is located under the ADF pad.
6. Place the new tension sping in the scanner.
7. Place the new ADF pad in the scanner and rotate it back into place.
8. Press down on the ADF pad until you hear a "click" when it locks in place.
9. Close the scanner when you’re finished.
Maintenance Xerox® Duplex Combo Scanner
User Guide 6-11
Troubleshooting
Problem: The scanner won’t scan. What’s wrong?
Check for one of these possible causes:
•Are the cables loose or not plugged in securely? Inspect the cable connections. Make sure
the cables are plugged in securely.
•Is the scanner’s status light on? Turn on the scanner’s power. If the status light doesn’t
come on, plug the power supply into another electrical outlet. If you are using a UPS battery
back-up or power strip, try plugging the scanner directly to a wall outlet.
•Did you restart the computer and scanner? If the scanner gets a paper jam, or looses
connection because of an error, try restarting your computer and power cycling the scanner.
•Did you plug the scanner into a USB hub? If you’re using a USB hub to connect the scanner
try plugging the scanner’s USB cable directly to the back of the computer. It is not
recommended that you use the scanner with a USB hub, if you are using a hub, the hub must
have its own power supply.
•Is the USB cable 6’ or less? If you are using a USB cable that is longer than 6’ you may lose
connection to the scanner. The recommended USB cable length is 6’ or less, the USB cable
provided with your scanner is within this range.
•Did you select another image source in the scanning software? If you use multiple
imaging devices with your computer, such as a camera, all-in-one printer, or another scanner,
you may have selected another source for images. Make sure Xerox® Simplex Combo Scanner
is selected as the scanner.
Problem: Why does my scanner not function after performing a system restore on Windows?
The system restore process may have corrupted some of the driver components. It is
recommended that you reinstall your scanner driver. Please refer to “Uninstalling Your Scanner” on
page 6-14 for installation instructions.
Problem: Why won’t my scanner buttons work after scanning with Windows Image Acquisition
(WIA)?
After performing a scan using the WIA interface you must close the application you were using
before scanning with the buttons on the scanner. This does not occur when scanning using the
TWAIN or ISIS interface.
Problem: Why won’t my scanner work after the computer has been sitting idle for several hours?
To resolve the problem, simply turn off the scanner power then turn it back on again.
This may occur after Windows goes into power saving mode to “hibernate” the computer into a
low power state. When you move your mouse or type on the keyboard it “wakes” the computer
back up and restores full power to the system. This power fluctuation during the computer’s
hibernating period may sometimes cause the scanner to lose communication to the computer.
Xerox® Duplex Combo Scanner Maintenance
6-12 User Guide
Problem: The installation will not complete successfully. If installation finishes, the scanner’s
OneTouch options do not seem to work properly.
A likely cause is that some driver programs are already installed on your computer for another
scanner. Or you previously had another Visioneer® or Xerox® scanner and that driver program is
still on your computer. They are interfering with the installation and OneTouch options, and you
need to remove those other drivers and re-install your Xerox® scanner. Please see the
documentation that you received with the other scanner for the steps to remove its driver
programs.
Problem: My computer keeps giving me out of hard drive space error messages.
The minimum requirement of free hard drive space is for the installation of the scanner driver and
basic, low resolution, scanning. High resolution scans result in files that can be over 1 gigabyte in
size. Free up some space on your hard drive for the software to be able to save the scanned
images.
Problem: The paper jams the ADF.
To reduce the number of paper jams, smooth and straighten the paper before scanning, and
adjust the guides to the paper size. Paper fed into the ADF at an angle can cause the feed
mechanism to jam. If paper jams are occurring more frequently, try cleaning the roller with a soft
cloth dampened with Isopropyl rubbing alcohol. Excessive dust on the roller can make it appear
worn and will cause issues feeding paper. See “Cleaning Inside the Automatic Document Feeder”
on page 6-4 for cleaning instructions.
Problem: The ADF won’t feed pages properly.
A dirty or worn ADF pad assembly or dirt on the roller can cause documents to feed in skewed at
an angle, or multiple pages to feed at the same time. Try cleaning the roller first. See “Cleaning
Inside the Automatic Document Feeder” on page 6-4. If that doesn’t solve the problem, the pad
assembly may need to be replaced. It is user replaceable. See “Replacing the ADF Pad Assembly”
on page 6-8 for the steps to replace the pad.
Problem: If the USB cable is disconnected during a scan, the scanner does not reconnect when
the USB cable is plugged back in.
Unplug the power cable from the scanner, and then plug it back in.
If the scanner does not reconnect:
1. Unplug the power cable from the scanner.
2. Restart your computer.
3. After the restart is complete, plug the power cable back in.
Problem: The scans from the input tray are always crooked.
Make sure to align the paper guides to the edges of the paper. If you are scanning small items
that are smaller than the paper guides’ minimum adjustment, scan these items from the front
feed tray instead.
Maintenance Xerox® Duplex Combo Scanner
User Guide 6-13
Problem: The scans from the ADF are always crooked.
Make sure to align the paper guides to the edges of the paper. If you are scanning small items
that are smaller than the paper guides’ minimum adjustment, scan these items on the Flatbed
glass instead.
Problem: The paper jams about halfway through the scan.
Check the flatbed glass to make sure no items are on it when you scan from the ADF. Multiple
items placed on the Flatbed glass will raise the lid slightly. When that occurs, the pages are unable
to feed back out of the ADF and the pages can jam.
Error Light Troubleshooting Codes
Normal Operation
•Steady blue: indicates the scanner is ready to scan.
•Slow flashing blue: indicates the scanner is in low power mode.
•Rapid flashing blue: indicates the scanner is waking up from low power mode.
•Steady red: the scanner is busy.
•Flashing red: the scanner is reporting an error.
Error Codes
The status light indicates the current state of the scanner. If your scanner experiences hardware
problems, the status light turns red and will flash a specific number of times, pause, and then
repeat the same number of flashes. The number of flashes between pauses indicates the
hardware error code. The LED display will also flash an “E” then the error code number that
matches the status light’s blinking pattern.
Descriptions of the most common patterns are listed below. In all cases, you should turn off the
scanner and check the scanner setup. Make sure the USB cable is plugged into the scanner and
computer. Make sure the power cord is plugged into the scanner and into a wall outlet. Contact
Xerox Technical Support if you experience a different blinking pattern.
Error
Code
Problem Description Solution
0 Scanner is not connected to
the computer
(The LED does not flash “E”
and the status light remains
blue.)
A cable may be loose. Check that the scanner’s cables are
correctly attached to the computer. If the scanner still does not
connect, re-boot the computer.
3 The scanner was locked
when you tried to scan.
Turn off the scanner, slide the locking tab to the unlocked
position, then turn the scanner back on. See page 1-3 for the
lock’s location. If the problem persists, reboot your computer.
4 Paper jam Open the ADF cover and remove the jammed page. See
“Clearing Paper Jams” on page 6-3.
6 The scanner’s cover is open The ADF door is not closed all the way. Open the scanner then
close it again. Push down on the lid until it locks into place.
Xerox® Duplex Combo Scanner Maintenance
6-14 User Guide
Uninstalling Your Scanner
Use the options in the Windows Control Panel to remove the scanner driver and modules, and any
other software provided with the scanner.
Please leave the scanner’s USB cable plugged into the computer while uninstalling the scanner
driver. Unplug the USB cable when directed to do so in the instructions below.
Open the list of installed programs in the Windows Control panel.
• Windows 7 and later: Open Programs and Features
Uninstalling the scanner driver:
1. In the list of installed programs click on Xerox® Duplex Combo Scanner driver.
2. Click the Change/Remove or Uninstall button.
3. Click Yes when asked to confirm that you want to remove the driver.
When the driver uninstallation is complete the progress window will automatically close.
4. Turn off the scanner and unplug the USB cable.
5. Reboot the computer if you are prompted to do so.
Follow these instructions to remove any of the other software you installed with your scanner.
Depending on the software provided with your scanner, and which applications you installed
during the scanner setup, the application list may include:
• Visioneer OneTouch
• Visioneer OneTouch OCR module
Uninstalling Visioneer Acuity™:
Visioneer Acuity is automatically installed when you install the scanner driver using the installation
disc. You can also download the Visioneer Acuity module from the support pages for your scanner
at www.xeroxscanners.com. Visioneer Acuity is a utility with advanced image processing options
to instantly improve the visual clarity of anything you scan.
1. In the list of installed programs select Visioneer Acuity Assets.
2. Click Yes when asked to confirm you want to remove the software.
Depending on the method of installation, and your scanner model, there may be multiple entries
1, 2, 7
or 8
The lamp in the scanner
body or lid has
malfunctioned
This usually occurs if the power was disconnected during a
scan. Turn the scanner off, then back on again. If the problem
persists, turn off the scanner, re-start the computer, then turn
the scanner on. If the problem continues, and your scanner’s
power is plugged into a surge protector or UPS battery backup,
try plugging the scanner power directly into a wall outlet.
All
Other
Codes
An internal part in the
scanner may have
malfunctioned
Turn off the power to your scanner, then turn it back on. If the
problem persists, re-boot your computer. If the problem still
persists, contact Xerox Technical Support.
Error
Code
Problem Description Solution
Maintenance Xerox® Duplex Combo Scanner
User Guide 6-15
for Visioneer Acuity in the installed programs list. The additional entries in this list are the image
processing libraries needed to support various scanner models. These additional items will be
called “Visioneer Acuity Assets” followed by a version number. In the scenario described here,
when you want to uninstall Visioneer Acuity make sure you select and uninstall Visioneer Acuity. If
you uninstall one of the entries labeled as an “asset” you will still need to uninstall the main
Visioneer Acuity utility.
Xerox® Duplex Combo Scanner Maintenance
6-16 User Guide
Xerox® Duplex Combo Scanner Specifications
Scanner Specifications
Document Requirements (ADF)
Minimum Item Size 3 x 5.9 inches (76 x 150 mm)
Maximum Item Size 8.5 x 14inches (216 x 356mm)
Capacity 35 pages of 20lb printer paper (75–80 gsm)
Paper Thickness 16–28 lbs. (60–125 gsm)
Document Requirements (Flatbed)
Minimum Item Size 0.5 x 0.5 inches ( 13 x 13 mm)
Maximum Item Size 8.5 x 11.70 inches (216 x 297 mm)
Item Thickness 0.39 inch (10 mm)
General Specifications
Optical Resolution 600 dpi
Output Bit Depth 24-bit color, 8-bit grayscale, 1-bit bitonal (black & white)
Scan Method Duplex Automatic Document Feeder (ADF)
Simplex U.S. Letter / A4 Flatbed
Image Sensor CIS (Contact Image Sensor)
Light Source RGB LED lamp
Interface Hi-Speed USB 2.0, compatible with USB 1.1
Certifications UL/C-UL, FCC CLASS B, CE, CB, WEEE, ROHS, ENERGY STAR, MEXICO ENERGY
(CFE), RCM, USB-IF, CCC
Operating Temperature 40° ~ 95° F (5° ~ 35° C without condensation)
Relative Humidity 10% ~ 90%
Scanner Dimensions (Trays Extended)
Width 15.8 inches (402 mm)
Depth 13 inches (330 mm)
Height 5.5 inches (139 mm)
Weight 5.94 pounds (2.7 kg)
Power Information
Power Supply APD (WA-36A24R)
DC Jack, 2P, 100~240Vac, 24Vdc, 1.5A, 36W, Class 1, ENERGY STAR, RoHS
Scanner Rating 24Vdc, 1,5A
Power consumption ≤ 15 Watts (during operation)
≤ 6.0 Watts (on standby)
< 2.0 Watts (power save after 15 minutes without scanning)
≤ 0.5 Watt (power off)
Cable Information
USB cable 1850 mm, 28AWG, with core, RoHS compliant
Maintenance Xerox® Duplex Combo Scanner
User Guide 6-17
* Speeds achieved using a computer with suitable specifications.
Xerox® Duplex Combo Scanner Parts List
Software Information
Supported Operating
Systems
Microsoft Windows
–32-bit or 64-bit 7 (Service Pack 1)
–32-bit or 64-bit 8 / 8.1
–32-bit or 64-bit 10
Scanner Drivers TWAIN, WIA, ISIS
Bundled Software Visioneer® OneTouch®
Visioneer® Acuity Module
Part Name Part Number
ADF Pad 57-0156-000
USB Cable 35-0118-000
Power Supply
Power Adapter Plugs
37-0100-000
Scanner Specifications
Xerox® Duplex Combo Scanner Maintenance
6-18 User Guide
User Guide 7-1
Basic Regulations
United States (FCC Regulations)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes and modifications to this equipment not specifically approved by Xerox® may void the
user’s authority to operate this equipment.
Shielded cables must be used with this equipment to maintain compliance with FCC regulations.
European Union
The CE mark applied to this product, symbolizes our declaration of conformity with the following
applicable European Union Directives, as of the dates indicated:
This machine is certified as Class 1 LED product. This means that this machine does not produce
hazardous laser radiation.
September 8, 2017: Council Directive 2014/35/EU as amended. Approximation of the laws of the
member states related to low voltage equipment.
August 12, 2016: Council Directive 2014/30/EU as amended. Approximation of the laws of the
member states related to electromagnetic compatibility.
7. Appendix A: Regulatory Information
Xerox® Duplex Combo Scanner Appendix A: Regulatory Information
7-2 User Guide
A full declaration of conformity, defining the relevant directives and referenced standards, can be
obtained from your Xerox Limited representative or by contacting:
Environment, Heath and Safety
Xerox (NL)
Sint Jansweg 15
NL-5928 RC Venlo
Telephone 1-800-ASK-XEROX
Turkey (RoHS Regulation)
In compliance with Article 7 (d) We hereby certify “It is in compliance with the EEE Regulation”.
(“EEE yönetmeliğine uygundur“)
Copy Regulations
United States
Congress, by statute, has forbidden the reproduction of the following subjects under certain
circumstances. Penalties of fine or imprisonment may be imposed on those guilty of making
such reproductions.
1. Obligations or Securities of the United States Government, such as:
Bonds and Obligations of certain agencies of the government, such as FHA, etc.
Bonds. (U.S. Savings Bonds may be photographed only for publicity purposes in connection
with the campaign for the sale of such bonds.)
Internal Revenue Stamps. (If it is necessary to reproduce a legal document on which there is a
canceled revenue stamp, this may be done provided the reproduction of the document is
performed for lawful purposes.)
Postage Stamps, canceled or uncanceled. (For philatelic purposes, Postage Stamps may be
photographed, provided the reproduction is in black and white and is less than 75% or more
than 150% of the linear dimensions of the original.)
Postal Money Orders.
Bills, Checks, or Drafts of money drawn by or upon authorized officers of the United States.
Stamps and other representatives of value, of whatever denomination, which have been or
may be issued under any Act of Congress.
2. Adjusted Compensation Certificates for Veterans of the World Wars.
3. Obligations or Securities of any Foreign Government, Bank, or Corporation.
Certificates of Indebtedness National Bank Currency Coupons from Bonds
Federal Reserve Bank Notes Silver Certificates Gold Certificates
United States Bonds Treasury Notes Federal Reserve Notes
Fractional Notes Certificates of Deposit Paper Money
Appendix A: Regulatory Information Xerox® Duplex Combo Scanner
User Guide 7-3
4. Copyrighted material, unless permission of the copyright owner has been obtained or the
reproduction falls within the “fair use” or library reproduction rights provisions of the copyright
law. Further information of these provisions may be obtained from the Copyright Office,
Library of Congress, Washington, D.C. 20559. Ask for Circular R21.
5. Certificates of Citizenship or Naturalization. (Foreign Naturalization Certificates may be
photographed.)
6. Passports. (Foreign Passports may be photographed.)
7. Immigration Papers.
8. Draft Registration Cards.
9. Selective Service Induction Papers that bear any of the following Registrant’s information:
Exception: U. S. Army and Navy discharge certificates may be photographed.
10. Badges, Identification Cards, Passes, or Insignia carried by military personnel, or by members
of the various Federal Departments, such as FBI, Treasury, etc. (unless photograph is ordered
by the head of such department or bureau.)
11. Reproducing the following is also prohibited in certain states: Automobile Licenses — Drivers’
Licenses — Automobile Certificates of Title.
The above list is not all inclusive, and no liability is assumed for its completeness or accuracy. In
case of doubt, consult your attorney.
Canada
Parliament, by statute, has forbidden the reproduction of the following subjects under certain
circumstances. Penalties of fines or imprisonment may be imposed on those guilty of making such
copies.
1. Current bank notes or current paper money.
2. Obligations or securities of a government or bank.
3. Exchequer bill paper or revenue paper.
4. The public seal of Canada or of a province, or the seal of a public body or authority in Canada,
or of a court of law.
5. Proclamations, orders, regulations or appointments, or notices thereof (with intent to falsely
cause same to purport to have been printed by the Queen’s Printer for Canada, or the
equivalent printer for a province).
6. Marks, brands, seals, wrappers or designs used by or on behalf of the Government of Canada
or of a province, the government of a state other than Canada or a department, board,
Commission or agency established by the Government of Canada or of a province or of a
government of a state other than Canada.
7. Impressed or adhesive stamps used for the purpose of revenue by the Government of Canada
or of a province or by the government of a state other than Canada.
Earnings or Income Dependency Status Court Record
Previous military service Physical or mental condition
Xerox® Duplex Combo Scanner Appendix A: Regulatory Information
7-4 User Guide
8. Documents, registers or records kept by public officials charged with the duty of making or
issuing certified copies thereof, where the reproduction falsely purports to be a certified copy
thereof.
9. Copyrighted material or trademarks of any manner or kind without the consent of the
copyright or trademark owner.
The above list is provided for your convenience and assistance, but it is not all inclusive, and no
liability is assumed for its completeness or accuracy. In case of doubt, consult your solicitor.
Other Countries
Copying certain documents may be illegal in your country. Penalties of fine or imprisonment may
be imposed on those found guilty of making such reproductions.
• Currency notes
• Bank notes and cheques
• Bank and government bonds and securities
• Passports and identification cards
• Copyright material or trademarks without the consent of the owner
• Postage stamps and other negotiable instruments
Note: this list is not inclusive and no liability is assumed for either its completeness or accuracy. In
case of doubt, contact your legal counsel.
User Guide 8-1
Product Recycling & Disposal
USA & Canada
If you are managing the disposal of your Xerox® product, please note that the product may
contain lead, mercury, Perchlorate, and other materials whose disposal may be regulated due to
environmental considerations. The presence of these materials is fully consistent with global
regulations applicable at the time that the product was placed on the market. For recycling and
disposal information, contact your local authorities. In the United States, you may also refer to the
Electronic Industries Alliance web site: http://www.eiae.org.
Perchlorate Material - This product may contain one or more Perchlorate-containing devices, such
as batteries. Special handling may apply, please see:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/.
European Union
RoHS and WEEE Compliance
This product is compliant with RoHS Regulations of the European Parliament and Council Directive
on the Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment (2011/65/EU), and with the Waste Electrical and Electronic Equipment (WEEE)
Directive (2012/19/EU).
Some equipment may be used in both a domestic/household and a professional/business
application.
Professional/Business Environment
Application of this symbol on your equipment is confirmation that you must dispose of this
equipment in compliance with agreed national procedures. In accordance with European
legislation, end of life electrical and electronic equipment subject to disposal must be managed
within agreed procedures.
8. Appendix B: Compliance Information
Xerox® Duplex Combo Scanner Appendix B: Compliance Information
8-2 User Guide
ENERGY STAR for the USA
Energy Program Compliance
The Xerox® Duplex Combo Scanner is ENERGY STAR qualified under the ENERGY STAR Program
Requirements for Imaging Equipment.
The ENERGY STAR and ENERGY STAR MARK are registered United States trademarks. The
ENERGY STAR Imaging Equipment Program is a team effort between U.S., European Union and
Japanese governments and the office equipment industry to promote energy-efficient copiers,
printers, fax, multifunction machine, personal computers, and monitors. Reducing product energy
consumption helps combat smog, acid rain and long-term changes to the climate by decreasing
the emissions that result from generating electricity.
Xerox® equipment is preset at the factory. Your machine will be delivered with the timer for
switching to Power Save Mode from the last scan set at 15 minutes.