Table of Contents
Acer ApexVision L811 User Manual
Displayed below is the user manual for ApexVision L811 by Acer which is a product in the Data Projectors category. This manual has pages.
Related Manuals
Acer DLP Projector
L811/EL8630Ua/HL-4K30Ua/
GL825Ua/VL-730Ua/
A4K2101/
L812/EL8632Ua/HL-4K32Ua/
GL827Ua/VL-732Ua/L811+/
A4K2109
Series User's Guide
Copyright © 2021. Acer Incorporated.
All Rights Reserved.
Acer Projector User's Guide
Original Issue: 08/2021
Acer Projector
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.
"HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC."
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
iii
Information for Your Safety and
Comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•Install the power supply unit before connecting the power cord to the AC
power outlet.
•Unplug the power cord before removing the power supply unit from the
projector.
•If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•Do not use this product near water.
•Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
•Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
iv
•To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
•Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices.
Using electrical power
•This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
•Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
•If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
•Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
•This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.5 meters (14.76 feet) maximum length.
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•the power cord or plug is damaged, cut or frayed
•liquid was spilled into the product
•the product was exposed to rain or water
•the product has been dropped or the case has been damaged
•the product exhibits a distinct change in performance, indicating a need
for service
•the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•Do not look into the projector's lens when the light source is on. The bright
light may hurt your eyes.
•Turn on the projector first and then signal sources.
•Do not place the product in the following environments:
• Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector are necessary.
• Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
• Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shorten the life span and darken the image.
• Locations near fire alarms.
• Locations with an ambient temperature above 40 ºC/104 ºF. Such environment
RG2 IEC/EN 62471-5:2015
vi
may cause the fan(s) to operate in standby mode.
• Locations where the altitudes are higher than 10000 feet.
•Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
•Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
•Do not face the projector lens to the sun. It can lead to fire.
•When switching the projector off, please ensure the projector completes
its cooling cycle before disconnecting power.
•Do not frequently turn off the main power abruptly or unplug the
projector during operation. The best way is to wait for the fan to stop
before turning main power off.
•Do not touch the air outlet grille and bottom plate which become hot.
•Clean the air filter frequently. The temperature inside may rise and cause
damage when the filter/ventilation slots are clogged with dirt or dust.
•Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
•Always open the lens shutter or remove the lens cap when the projector is
on.
•Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the light source,
press HIDE on the remote control.
•Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you.
•Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
•This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
•Images can be projected over a full 360° range along the vertical axis,
including reproduction on a ceiling or floor. Do not use the projector with
it leaning to the left and right. This may result in a malfunction.
360º
360º
vii
Caution for Listening
To protect your hearing, follow these instructions.
•Increase the volume gradually until you can hear clearly and comfortably.
•Do not increase the volume level after your ears have adjusted.
•Do not listen to music at high volumes for extended periods.
•Do not increase the volume to block out noisy surroundings.
•Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit http://www.acer-group.com/public/
Sustainability/index.htm
Laser caution
This product belongs to CLASS I laser product and complies with IEC 60825-
1:2014.
Above laser cautions are located on the bottom of this apparatus.
•Notice is given to supervise children and to never allow them to stare into
the projector beam at any distance from the projector.
•Notice is given to use caution when using the remote control for starting
the projector while in front of the projection lens.
•Notice is given to the user to avoid the use of optical aids such as
binoculars or telescopes inside the beam.
viii
First Thing First
Usage Notes
Do:
•Turn off the product before cleaning.
•Use a soft cloth moistened with mild detergent to clean the display
housing.
•Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•Block the slots and openings on the projector provided for ventilation.
•Use abrasive cleaners, waxes or solvents to clean the unit.
•Use under the following conditions:
•In extremely hot, cold or humid environments.
•In areas susceptible to excessive dust and dirt.
•Near any appliance that generates a strong magnetic field.
•Place in direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•Do not look into the projector's lens when the projector is on. The bright light may
hurt your eyes.
•To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•Please do not open or disassemble the product as this may cause electric shock.
•When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•Turn on the projector first and then the signal sources.
•Do not use lens cap when projector is in operation.
Information for Your Safety and Comfort iii
First Thing First viii
Usage Notes viii
Precautions viii
Introduction 1
Product Features 1
Package Overview 2
Projector Overview 3
Projector Outlook 3
Control Panel 4
Remote Control Layout 5
Getting Started 7
Connecting the Projector 7
Turning the Projector On/Off 8
Turning On the Projector 8
Turning Off the Projector 9
Adjusting the Projected Image 10
Adjusting the Height of the Projected Image 10
How to Get a Preferred Image Size by Adjusting
Distance and Zoom 11
User Controls 12
Installation Menu 12
Onscreen Display (OSD) Menus 13
Color 14
Image 17
Setting 20
Management 24
Audio 25
3D 26
Language 26
Acer Splash Downloader 27
Introduction 27
Using the Acer Splash Downloader 27
Contents
1
English
Introduction
Product Features
This product is a single-chip DLP® projector, including the following
outstanding features:
•DLP® technology
•Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D
supported
•Versatile display modes enable optimum performance in any situation
NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported
•Acer ColorBoost technology delivers vivid, life-like images
•High brightness and contrast ratio
•Versatile display modes enable optimum performance in any situation
•NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported
•Lower power consumption and economy (ECO) mode extends projector life
•Acer EcoProjection Technology delivers Intelligent power management
approach and physical efficiency improvement
•Advanced keystone correction delivers optimum presentations
•Multi-language Onscreen Display (OSD) menus
•Motorised focus projection lens
•0.8 ~ 2X digital zoom and pan move function
•Microsoft® Windows® 2000, XP, 7, 8, 8.1, 10, Vista®, Macintosh OS, Chrome
OS compliant
•LAN settings enable remote management of projectors via a web browser
•Crestron compliant
•CEC (Consumer Electronics Control) function supported
•BluelightShield function supported
•Auto 360 degree cooling prevents the projector from overheating
•Adjustable light source power
•Smart system supported. For details, refer to the Acer Smart Projector
Smart System User’s Guide.
2
English
Package Overview
This projector comes with all the items shown below. Check to make sure you
have them all. Contact your dealer immediately if any thing is missing.
Note: The package content may differ by regions and models.
Projector Power cord VGA cable
(Optional)
HDMI cable
(Optional)
Security card
(Optional)
User’s guide (CD-
ROM) (Optional)
Remote control Quick start guide
AAA Battery x 2 Carrying case
(Optional)
WirelessHD dongle kit (MWIHD1)
(Optional)
Wireless dongle
(UWA5) (Optional)
3
English
Projector Overview
Projector Outlook
Front/upper side
Rear side
#Description #Description
1 Speaker grills 4 Indicator LED
2 Remote control receiver 5 Control panel
3 Projection lens
#Description #Description
1 LAN (RJ45 port for 10/100M
Ethernet)
8 RS232 connector
2 USB connector (Type A) 9 Audio output connector
3 USB-C connector 10 USB-A (for wireless dongle)
4 HDMI connector 11 Kensington™ lock port
5 USB connector (Type A) 12 Security slot
6 12V DC output connector 13 Power socket
7 S/PDIF port 14 Tilt adjusting wheel
1
2
1
3
4
5
1414 1414
11
12
13
1 4 53 9 1086 72
4
English
Bottom side
Control Panel
#Function Description
1 LAMP Light source indicator LED.
2 POWER Power indicator LED
3 Keystone Adjusts image distortion caused by tilting projection.
4 Power key Refer to the "Turning the Projector On/Off" section.
5 ENTER Confirms your selection of items.
6 BACK Cancels your selection, or goes back to previous page.
7 TEMP Temperature indicator LED.
8 SOURCE Changes the active source.
9 Four directional
selection keys
Selects items or makes adjustments to your selection
10 MENU Launches the Onscreen Display (OSD) menu, returns to
the previous step for the OSD menu operation or exits
the OSD menu.
247.81
346.34
38.01
268.63
12.17
246.36
Unit: mm
17
3
3
610
8
9
4
5
2
5
English
Remote Control Layout
#Function Description
1 POWER Refer to the "Turning the Projector On/Off" section.
2 SOURCE Changes the active source.
3 MENU Launches the Onscreen Display (OSD) menu or exits the
OSD menu.
4
Keystone
Adjusts image distortion caused by tilting projection.
Four
directional
selection
keys
Selects items or makes adjustments to your selection.
ENTER Confirms your selection of items.
Play/Pause
5 BACK Cancels your selection, or goes back to previous page.
Stop
6 FREEZE To pause the screen image.
7 VGA To change source to VGA. This connection supports
analog RGB, and YPbPr (480i/480p/576i/576p/720p/1080i/
1080p).
8 PgUp/PgDn For computer mode only. Use this button to select the
next or previous page. This function is only available
when connected to a computer via a mini USB cable.
9 COMPONENT (No function)
1
5
2
6
3
4
7
8
9
8
10
11
12
13
17
16
19
18
20
21
18
14
15
6
English
10 MEDIA Opens MEDIA SETUP page. (for LAN/wireless
compatible models)
11 Infrared
transmitter
Sends signals to the projector.
12 MOUSE Provides mouse function under the Smart system.
13 VOL+ Increases the projector’s volume.
14 VOL- Decreases the projector’s volume.
15 HOME Switches the remote control functions to the Smart
system.
16 HIDE Press "HIDE" to hide screen image; press again to
display the image.
17 HDMI/MHL To change source to HDMI™ (or MHL). (for the model
with HDMI™ or MHL connector)
18 ZOOM IN/ZOOM
OUT
Zooms the projector display in or out.
19 VIDEO To change source to composite video. (for the model
with composite video connector)
20 LAN/WiFi To change source to LAN/WiFi. (for LAN/wireless
compatible models)
21 Keypad 0~9 (No function)
#Function Description
7
English
Getting Started
Connecting the Projector
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
#Description #Description
1Power cord 7USB Type-C cable
2 HDMI cable 8 RJ45 cable
3 S/PDIF audio cable 9 Wireless dongle
4 Audio cable 10 USB drive
5 USB cable 11 12V DC cable
6 RS232 cable
1
2
2
4
3
5
6
7
7
8
11
9
10
Speakers
Smart devices
Note: Connector interface is subject to model's
specifications.
Screen
8
English
Turning the Projector On/Off
Turning On the Projector
1 Ensure that the power cord and signal cable are securely connected.
The Power LED will light red.
2 Turn on the projector by pressing (POWER) on the control panel or
remote control, and the Power indicator LED will turn blue.
3 Turn on your source (computer, notebook, video player, etc.). The
projector will detect your source automatically (when it is the first
time you turn on the projector or the Source Selection function is
"Auto").
• If the screen displays "No Signal", please make sure the signal cables
are securely connected.
• If you connect to multiple sources at the same time, use "SOURCE" on
the control panel or remote control, or the direct source key on the
remote control to switch between inputs.
9
English
Turning Off the Projector
1 To turn the projector off, press the power button. This message
appears:
"Please press power button again to complete the shutdown process"
Press the power button again.
2 The LED Power indicator will turn solid red to indicate standby mode.
3 It is now safe to unplug the power cord.
Warning indicators:
•"Projector Overheated. Lamp will automatically turn off soon."
This onscreen message indicates that the projector has overheated.
The lamp will automatically turn off, the projector will automatically
shut down, and the LED Temp indicator will turn solid red. Contact
your local dealer or service center.
•"Fan failed. Lamp will automatically turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down,
and the LED Temp indicator will blink. Contact your local dealer or
service center.
Note: Whenever the projector automatically shuts down and the
LED Temp indicator turns solid red, contact your local reseller or
service center.
10
English
Adjusting the Projected Image
Adjusting the Height of the Projected Image
The projector is equipped with elevator feet for adjusting the image height.
To raise the image:
1 Use the front Tilt adjusting wheel to raise the image to the desired
height and angle.
2 Use the rear Tilt adjusting wheel to fine-tune the display angle.
To lower the image:
1 Use the front Tilt adjusting wheel to lower the image to the desired
height and angle.
2 Use the rear Tilt adjusting wheel to fine-tune the display angle.
Tilt adjusting wheel
Tilt adjusting wheel
Tilt adjusting wheel
Tilt adjusting wheel
11
English
How to Get a Preferred Image Size by Adjusting
Distance and Zoom
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring.
To obtain an image size of 70" set the projector at a distance of 0.059 m from
the screen.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
< A > W (cm) x H (cm) Max zoom
< B >
Min zoom
< B >
From base to top of
image < C >
60 129 x 81 0.009 0.009 99
70 151 x 94 0.059 0.059 115
80 172 x 108 0.110 0.110 131
90 194 x 121 0.160 0.160 148
100 215 x 135 0.211 0.211 164
110 237 x 148 0.262 0.262 181
120 258 x 162 0.312 0.312 197
130 280 x 175 0.363 0.363 214
140 302 x 188 0.413 0.413 230
150 323 x 202 0.464 0.464 246
160 345 x 215 0.514 0.514 263
Zoom Ratio: 1.0 x
Desired distance
Height:
115 cm
From base
to top of
image
70"
Desired
image size
0.059 m
12
English
User Controls
Installation Menu
The Installation menu provides an Onscreen Display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No
signal" is displayed on the screen or when the projector searches for input
signal.
1 Turn on the projector by pressing (POWER) on the control panel or
remote control.
2 Press "MENU" on the control panel or remote control to launch the
OSD for projector installation and maintenance.
3 The background pattern acts as a guide to adjusting the calibration
and alignment settings, such as screen size and distance, focus and
more.
Note: The OSD screenshot is for reference only and may differ from the
actual design.
4 The Installation menu includes several options.
Use the up and down arrow keys to select an option, the left and right arrow keys to
adjust selected option settings, and the right arrow key to enter a submenu for
feature setting. The new settings will be saved automatically upon exiting the menu.
5 Press "MENU" anytime to exit the menu and return to the Acer
welcome screen.
13
English
Onscreen Display (OSD) Menus
The projector has multilingual Onscreen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
Using the OSD menus
•To open the OSD menu, press "MENU" on the control panel or remote
control.
•When the OSD is displayed, use to select an item in the main menu.
After selecting the desired main menu item, press to enter a submenu
for feature setting.
•Use to select the desired item and adjust the settings by using
.
•Select the next item to be adjusted in the submenu and adjust as described
above.
•Press "MENU" on the control panel or remote control, the screen will
return to the main menu.
•To exit the OSD menu, press "MENU" on the control panel or remote
control again. It will close and the projector will automatically save the
new settings.
Note: Some of the following OSD settings may not be available. Please refer
to the actual OSD of your projector.
Main menu
Submenu
Setting
14
English
Color
BluelightShield
This function protects your eyes from over-exposure to
blue light. The options are Off, Low, Medium, and High.
Choose a preferred setting to reduce the level of blue light
and get a comfortable viewing experience.
Dynamic Black
The projector can intelligently optimizes the brightness
and color saturation of projected image. The feature
greatly enhances dark detail visibility and color saturation.
•Off: For normal mode.
•On: Automatically optimizes the display of dark movie
scenes enabling them to be shown in incredible detail.
This function is unavailable when 3D is set to "On"
Display Mode
There are many factory presets optimized for various types
of images.
•Bright: For brightness optimization.
•Presentation: For meeting presentation with higher
brightness.
•Standard: For common environment.
•Movie: For brighter and general movie/video/photo
playing.
•Dark Cinema: For dark movie content.
•Game: For game content.
•Football: For football game.
•EcoPro: For extending lamp life.
•DICOM SIM: For DICOM format files in simulation
mode, and not for actual diagnosis.
•ISF Day/ISF Night: Only available when ISF is enabled.
•User 1/User 2/User 3: Memorize user’s settings. Switch
to user mode for picture quality settings.
Color Profile
Available when User 1/User 2/User 3 is selected in the
Display Mode menu. You can use one of the display modes
as a starting point and customize the settings. The below
OSD items can be adjusted and saved.
Wall Color
Use this function to choose a proper color according to the
wall. There are several choices, including White, Light
Yellow, Light Blue, Pink and Dark Green. It will compensate
for the color deviation due to the wall color to show the
correct image tone.
15
English
Brightness
Adjusts the brightness of the image.
•Press to darken the image.
•Press to lighten the image.
Contrast
Controls the degree of difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
•Press to decrease the contrast.
•Press to increase the contrast.
Saturation
Adjusts a video image from black and white to fully
saturated colors.
•Press to decrease the amount of color in the
image.
•Press to increase the amount of color in the
image.
Tint
Adjusts the color balance of red and green.
•Press to increase the amount of green in the
image.
•Press to increase the amount of red in the image.
Color
Temperature
Adjusts the color temperature. At higher color
temperatures, the screen looks colder; at lower color
temperatures, the screen looks warmer.
Gamma Effects the representation of dark scenery. With greater
gamma value, dark scenery will look brighter.
16
English
Note: "Saturation" and "Tint" functions are not supported under computer
mode.
Advanced
•Ind. Color Management: Adjusts the red, green, blue,
cyan, yellow and magenta colors.
•- Ind. Hue: Changes the hue of the color selected.
•- Ind. Saturation: Adjusts a video image from black
and white to fully saturated color.
•- Ind. Gain: Adjusts the contrast levels.
•Super Resolution: It is a super-resolution technology
which radically enhances Full HD content in terms of
colors, contrast, and textures. It's also a Detail
Enhancement Technology which refines surface
details for true-to-life images that pop off the screen.
Users can adjust levels of sharpness and detail
enhancement for optimal viewing.
•Brilliant Color: Produces an expanded on-screen color
spectrum that delivers enhanced color saturation for
bright, true-to-life images. This feature is "On" by
default.
•White Peaking: Increases the brightness of whites that
are near 100%. (Video sources only)
•Film Mode: Sets the image optimized to 24-frame True
Film mode for more realistic cadence of film playback
during motion sequences.
•ISF: This menu is password protected and only
accessible by authorized calibrators. The ISF (Imaging
Science Foundation) has developed carefully crafted,
industry-recognized standards for optimal video
performance and has implemented a training
program for technicians and installers to use these
standards to obtain optimal picture quality ISF
certified display devices. Accordingly, we recommend
that setup and calibration be performed by an ISF
certified installation technician. For more information,
go to www.imagingscience.com or contact the dealer
or retailer from whom you purchased the projector.
Rename
Available when User 1/User 2/User 3 is selected in the
Display Mode menu. You can change User 1/User 2/User 3
to your preferred mode name in English letters.
17
English
Image
Projection
Mode
• Front: The factory default setting.
• Rear: Reverses the image so you can project from
behind a translucent screen.
Projection
Location
• Auto: Automatically adjusts projection location of
image.
• Desktop
• Ceiling: Turns the image upside down for ceiling-
mounted projection.
Aspect Ratio
Use this function to choose your desired aspect ratio.
•Auto: Keeps the image with original width-height ratio
and maximizes the image to fit native horizontal or
vertical pixels.
•Full (for WXGA/1080p models): The image will be
displayed making full use of the horizontal and vertical
pixels.
•4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
•16:9: The image will be scaled to fit the screen and
displayed using a 16:9 ratio.
•L.Box (for WXGA/1080p models): Keeps the original
signal aspect ratio and zooms in by 1.333 times.
Lens Focus Press to adjust the projector’s focus.
H/V Keystone
V. Keystone
Manually adjusts image distortion caused by tilting
projection (±5 degrees).
H. Keystone
Manually adjusts image distortion caused by tilting
projection (±5 degrees).
18
English
Rotation
Rotates the projected image.
•Press to rotate the image counterclockwise.
•Press to rotate the image clockwise.
4 Corner
Correction
Manually adjusts the shape and size of an image that is
unevenly rectangular on all sides. Press "MODE" repeatedly
to select the corner that you wish to adjust. Press four
directional selection keys to adjust the image shape.
Please adjust 4-corner correction separately for each
aspect ratio, and its memory is allowed to save 4 sets of
settings only.
Digital Zoom
Out
Sets the default size of the projected image. You can further
zooms in or out the image by pressing . Using the
functions of Digital Zoom Out and Image Shift together helps
you fit the projected image full screen without adjusting the
existing ceiling mount settings.
Image Shift
Shifts the projected image by pressing . When Native
Resolution is WUXGA, this functions is only available when
the setting of Digital Zoom Out (Install) is less than 1.0.
Sharpness
Adjusts the sharpness of the image.
•Press to decrease the sharpness.
•Press to increase the sharpness.
HDMI Color
Range
Adjusts the color range of the HDMI image data to prevent
color display error.
•Auto: Automatically adjusts the color range by
information from the player.
•Limited Range: Processes the input image as limited
color range data.
•Full Range: Processes the input image as full color range
data.
19
English
Note: "HDMI Color Range" and "HDMI Scan Info" are only available when
the input signal is HDMI.
HDMI Scan Info
Adjusts the overscan ratio of the HDMI image on screen.
•Auto: Automatically adjusts the overscan ratio by
information from the player.
•Underscan: Always no overscan on the HDMI image.
•Overscan: Always keep overscan on the HDMI image.
Silent
When this function is enabled:
•The acoustic noise will be minimized.
•The display resolution will be set at 1920 x 1080.
20
English
Setting
HDR
•HDR: The projector supports HDR imaging sources. It can
automatically detect the dynamic range of the source,
and optimize settings to reproduce contents under wide
range of light conditions. If the input source is not
defined with dynamic range, you can also manually
select SDR for it.
•EOTF: This function helps provide better image quality
with options from low, middle to high.
Startup Screen
Use this function to select your desired startup screen. If you
change the setting, it will take effect when you exit the OSD
menu.
•Acer: The default startup screen of your Acer projector.
•User: Use the picture you transfer to the projector. See
"Acer Splash Downloader" for how to transfer the
picture.
Warping
Note: Some of the following OSD settings may not be
available. Please refer to the actual OSD of your
projector.
The function is to configure the geometric distortion of the
projector’s images when the images are projected onto
screens which have a kind of uneven surface such as a
cylinder, a spherical shape, etc.
Enable
Keystone and corner correction functions will not be
available when Warping is enabled.
Control Channel
Allows you to select a preferred control method for warping
adjustment.
Warping Correction
This function is available when On is selected in the Warping
> Enable menu and OSD is selected in the Warping > Control
Channel menu.
Source Selection
•Manual: When switching input signals, you need to press
"SOURCE" on the control panel or remote control, or
the direct source key on the remote control.
•Auto: The projector will detect your source
automatically.
Auto Screen The default value is "On". The up/down move of your
electronic screen relates to power on/off of the projector.
21
English
Using a web browser to control your projector
1. Make sure that your PC and the projector are connected to the same local
USB 5V
(Standby)
Selecting "On" enables the function. The MHL port(s) and the
DC 5V out port/USB A port (if available) on the projector can
output 5V power when the projector is turned on or in
standby mode.
Only MHL port(s) will provide power output when
MHL port(s) and USB A port are both plugged.
HDMI CEC
Selecting "On" allows synchronized power ON/OFF operation
between the projector and a CEC-compatible device
connected to the HDMI port of the projector.
This function is only available for the HDMI port.
Low Input Lag
This function is especially suitable for gaming environment. It
reduces input to output latency and helps create a seamless
experience.
This function is only available for certain input timings.
After turned on, performing Auto Keystone or
adjusting the following settings will deactivate this
function: Aspect ratio, Keystone, H. Position, V.
Position, Frequency, HDMI Scan Info, Digital Zoom.
When Display Mode is Game Dark or Game Bright, this
function will be automatically turned on.
LAN
LAN (Standby)
The default value is "Off". Choose "On" to enable the LAN
connection.
LAN IP/Mask
Identify IP and Mask address.
MAC Address
Identify MAC address.
DHCP
Selecting "On" when you are in a DHCP environment to
obtain the IP address automatically. Selecting "Off" and
you’ll have to manually assign the IP Address, Subnet Mask,
Gateway and DNS.
LAN Reset
Press "ENTER" after choosing "Yes" to return all items on the
LAN Setting page to the default settings.
Reset Press "ENTER" after choosing "Yes" to return the display
parameters on all menus to the factory default settings.
22
English
area network.
2. Open the web browser on your PC and type in the LAN IP of the projector.
(See the LAN IP in the Setting > LAN > LAN IP/ Mask menu.)
3. Set a password. Password needs to be at lest 8 characters in length and use
a mix of the following 3 types of letters: uppercase letters, lowercase letters
and digits. Enter the password a again to confirm it.
4. The remote network operation page displays and you can control the
projector. If not, perform LAN Reset in the Setting > LAN menu of the
projector’s OSD menu and then try again.
Note 1 : An overview of the remote network operation page
Note 2 : An overview of the Tools page
Note 3: The Info page shows the projector information and status.
To switch input
signals, click your
desired signal.
These buttons
function the
same as those
on the OSD
menus,
projector
control panel,
or remote
control.
See Note 2 and
Note 3.
You can enter
the projector
information.
DHCP can be
disabled and
these settings
have to be
configured
manually.
You can set the
user password/
administrator
password to
prevent
unauthorized use
of the remote
network
operation/Tools
page.
Mac Address
can be
obtained
from here.
23
English
This projector can be controlled by using a PC (laptop) or other external
device via LAN / RJ45 port and compatible with Crestron / AMX (Device -
Discovery) / PJLink.
• Crestron is a registered trademark of Crestron Electronics, Inc. of the
United States.
• AMX is a registered trademark of AMX LLC of the United States.
• PJLink applied for trademark and logo registration in Japan, the United
States of America, and other countries by JBMIA.
The projector is supported by the specified commands of the Crestron
Electronics controller and related software,
for example RoomView®.
For more information, visit http://www.crestron.com/
This projector is supported by AMX (Device Discovery).
For more information, visit http://www.amx.com/
This projector supports most commands of PJLink Class1 (Version 1.00).
For more information, visit http://pjlink.jbmia.or.jp/english/
24
English
Management
ECO Mode
Choose "ECO" to dim the projector lamp, which will also
lower the power consumption, reduce noise, and extend
the lamp life. Choose "User" allows you to adjust the light
source power. Choose "Off" to return to the normal mode.
Light Source
Power
This function is only available when "Custom" is selected
in the ECO Mode menu. You can adjust the light source
power to extend the light source life and decreases the fan
noise.
High Altitude
Choose "On" to turn on the High Altitude mode. When
this function is turned on, the projector fans operate at full
speed continuously to cool down the projector’s
temperature.
Auto Shutdown
(Minutes)
The projector will automatically shut down while there is
no signal input detected after the time you set.
Menu Display
Time (Seconds)
•5/15/30: Chooses the length of time the OSD menu
will remain active after your last key press.
•Manual: The OSD menu remains active. The only way
to launch or exit the OSD menu is by pressing
"BACK".
Auto Power On
AC Power On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
power cord.
HDMI Power On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
power cord and the HDMI signal is supplied via the HDMI
cable.
25
English
Audio
Control Panel
Lock
•Off: Allows all keys on the control panel to operate
normally.
•Child Lock: Disables the Power key on the control
panel when the projector is in standby mode to
prevent it from being accidentally turned on. To turn
the projector on, press and hold the Power key for 3
seconds.
•Full Lock: Disables all keys on the control panel. If you
turn off the projector without disabling the Full Lock
function, the projector will still be in locked status the
next time it is turned on. To disable Full Lock function,
press and hold "POWER" on the control panel for 7
seconds and the Control Panel Lock will be set to
"Off". When the projector is in standby mode, press
and hold "POWER" on the control panel for 7 seconds
to turn the projector on and the Control Panel Lock
will be set to "Off".
Information Displays current status of this projector.
Volume •Press to decrease the volume.
•Press to increase the volume.
Mute •Choose "On" to turn mute on.
•Choose "Off" to turn mute off.
Power On/Off
Volume
Select this function to adjust the notification volume
when turning the projector on/off.
SPDIF
The default value is "Off". When this function is
enabled, the audio output connector and internal
speaker(s) will be turned off.
Audio Mode
Mode
There are several factory-preset sound modes optimized
for different audio categories.
Treble
Adjusts treble level.
Bass
Adjusts bass level.
26
English
3D
Note: For supported 3D signal timings. Please find the 3D support
document.
It needs correct settings on graphics card 3D application program for correct
3D display.
Note: "3D L/R Invert" and "3D Format" are only available when "3D" is
enabled.
Language
3D
Selects "On" to enable the 3D function supported by DLP 3D
technology.
•On: Select this item while using DLP 3D glasses, quad
buffer (NVIDIA/ATI...) graphics card and HQFS format file
or DVD with corresponding SW player.
•Off: Turns off the 3D mode.
3D Format
If the 3D content is not displayed correctly, you can select a
3D format that suits the 3D content you are viewing and
obtain the best result.
24P 3D Choose 96Hz or 144Hz for 24p 3D.
3D L/R Invert
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute "Invert" to get best
match of left/right image sequence to get the correct image
(for DLP 3D).
3D Warning
Message
Choose "On" to display the 3D warning message.
Language Sets a language for the OSD menus. Use to
select your preferred language.
27
English
Acer Splash Downloader
Introduction
Acer Splash Downloader allows you to upload your desired picture onto an Acer
projector. You can select the picture as the startup screen via the projector’s
OSD menu.
System Requirements
Using the Acer Splash Downloader
1. Entering download mode
Long press the POWER and MENU buttons on the control panel simultaneously
while plugging in the power cord until the LED indicator lights up red.
Maximum image size 6 Mbytes
Maximum image resolution 1920 x 1200
Recommended: Native resolution
Minimum image resolution 800 x 600
Maximum color bits 24 bits
Image format BMP, JPG, PNG
Supported operation
system
Windows 7, 8, 8.1, 10 (32 / 64 Bit)
28
English
2. Connecting the computer to the projector
Use an USB cable to connect the computer and the projector.
3. Executing the Acer Splash Downloader tool on the computer
If the projector is not properly connecting to the computer, below message will
be displayed.
If the projector successfully connects the computer, below message will be
displayed. Press "Logo Replace" to proceed.
4. Loading the image
First, select the native resolution for the projector by adjusting "PJ Native
Resolution" and decide if you want the image to be displayed full screen or in
its original aspect ratio.
Press "LoadImage" and choose an image from your computer.
29
English
If the image is loaded successfully, the tool status will display "Load Image
successfully".
"Setting changed!! Please load image again." will be displayed in the tool
status when PJ Native Resolution or aspect ratio is adjusted after the image is
loaded successfully.
"Image size is over defined range" will be displayed in the tool status when the
image is too large, and "Load Image fail" will be displayed when the image
format is not supported.
5. Downloading the image to the projector
Press "Download" to start downloading the image to the projector.
Note: If "Unknown" is shown in the Manufacture or Device ID
field, the projector is not in a status suitable for download. Go
back to step 1 and try again.
After the image is downloaded successfully, the projector will
automatically shut down (enter standby mode), and the Startup Screen
function in the OSD menu will be set to "User".
30
English
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
# Problem Solution
1 No image appears
onscreen •Make sure all the cables are correctly connected as
described in the "Getting Started" section.
•Ensure none of the connector pins are bent or
broken.
•Make sure the projector is switched on.
2 Partial, scrolling
or incorrectly
displayed image
(For PC)
•For an incorrectly displayed image:
•Open "My Computer > Control Panel," and
then double-click the "Display" icon.
•Select the "Settings" tab.
•Verify that your display resolution setting is
lower than or equal to 1600 x 1200 or 1920 x
1080.
•Click the "Advanced Properties" button.
If the problem still appears, change the monitor display
you are using and follow the steps below:
•Verify that the resolution setting is lower than
or equal to 1600 x 1200 or 1920 x 1080.
•Click the "Change" button under the
"Monitor" tab.
•Click "Show all devices > Standard monitor
types" under the SP box, and choose the
resolution mode you need under the "Models"
box.
•Verify that the resolution setting of the
monitor display is lower than or equal to 1600 x
1200 or 1920 x 1080.
31
English
3 Partial, scrolling
or incorrectly
displayed image
(For notebooks)
•For an incorrectly displayed image:
•Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP
[Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]
•If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
4 The screen of the
notebook
computer is not
displaying your
presentation
•If you are using a Microsoft® Windows® based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
•If you are using an Apple® Mac® OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On."
5 Image is unstable
or flickering •Change the display color setting on your computer.
6 Image has vertical
flickering bar •Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
7 Image is out of
focus •Adjust the focus settings.
•Make sure the projection screen is within the
required distance. (Refer to "Projection distance
with clear focus" section for more information.)
Refer to the "How to Get a Preferred Image Size by
Adjusting Distance and Zoom" section for more
information.
8 Image is stretched
when displaying a
"widescreen"
DVD title
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•If you play a 4:3 format DVD title, please change the
format to 4:3 with the projector OSD.
•If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
9 Image is too small
or too large •Adjust the zoom lever on the top of the projector.
•Move the projector closer to or further from the
screen.
•Press "MENU" on the control panel or remote
control. Go to "Image" > "Aspect Ratio" and try
different settings.
32
English
Problems with the Projector
10 Image has slanted
sides •If possible, reposition the projector so that it is
centered on the screen and below the bottom of the
screen.
•Press the Keystone correction keys on the control
panel or remote control until the image becomes
square.
•Press "MENU" on the control panel or remote
control to open the OSD menu. Go to "Image" > "H/
V Keystone" or "Image" > "4 Corner Correction" to
make adjustments.
11 Image is reversed •Select "Image" > "Projection Mode", "Image" >
"Projection Location" on the OSD and adjust the
projection direction.
# Condition Solution
1 The projector stops responding
to all controls
•If possible, turn off the projector, then
unplug the power cord and wait at
least 30 seconds before reconnecting
power.
•Make sure that the control panel lock
function is disabled.
2 Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, contact
your local dealer or Acer service center.
33
English
OSD Messages
# Condition Message Reminder
1 Message Fan Fail - the system fan is not working.
Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed to
cool down before it is used.
Fan Fail.
Laser will automatically turn off soon.
Projector Overheated.
Laser will automatically turn off soon.
34
English
LED & Alarm Definition Listing
LED Messages
Message Power LED LAMP LED TEMP LED
Red Blue Red Red
Standby
(Power cord plugged in)
V-- -- --
Power on -- V -- --
Lamp retry -- Quick
flashing
-- --
Turning off (Cooling
state)
Quick
flashing
-- -- --
Turning off (Cooling
completed)
V-- -- --
Firmware download V -- V V
Acer splash download V -- V V
Error (Thermal failure) -- V -- V
Error (Fan lock failure) -- V -- Quick
flashing
Error (Lamp breakdown) -- V V --
Error (Color wheel
failure)
-- V Quick
flashing
--
35
English
Ceiling Mount Installation
If you wish to use a third party ceiling mount kit, please ensure the screws used
to attach a mount to the projector meet the following specifications:
• Screw type: M4 x 10L
Note: Please note that damage resulting from incorrect
installation will void the warranty.
Warning:
•If you buy a ceiling mount from another company, please be sure to use
the correct screw size. Screw size will vary depending on the thickness of
the mounting plate.
•Be sure to keep at least 10 cm gap between the ceiling and the bottom of
the projector.
•Avoid installing the projector near a heat source.
247.81
346.34
38.01
268.63
12.17
246.36
Unit: mm
36
English
Specifications
The specifications below are subject to change without notice. For final specs,
please refer to Acer's marketing documentation.
Projection system DLP™
Computer compatibility Refer to the "Compatibility Modes" section for more
information.
Video compatibility NTSC/NTSC4.43/PAL (M/N)/ SECAM/ PAL60/ NTSC (480i)/
480p/ PAL (576i)/ 576p, HDTV (720p/1080i/1080p)
Displayable colors 1.07 billion colors
Digital zoom 0.8 – 2 X
Weight Approximate 7.8 kg (17.2 lbs.)
Dimensions (W x D x H) 429 x 389 x 143 mm (16.9" x 15.3"x 5.6")
429 x 389 x 158 mm (16.9" x 15.3"x 6.2") (with tilt
adjusting wheels)
Power supply Universal AC input 100 - 240 V, input frequency 50/60
Hz
Operating temperature 0ºC to 40ºC / 32ºF to 104ºF
Standard package contents •AC power cord x 1
•Remote control x 1
•Battery x 2 (for the remote control)
•Quick start guide x 1
Accessory (optional) •User's guide (CD-ROM) x 1
•VGA cable x 1
•HDMI cable x 1
•Security card x 1
•Carrying case x 1
•WirelessHD dongle kit (MWIHD1) x 1
•Wireless dongle (UWA5) x 1
37
English
L811/EL8630Ua/HL-4K30Ua/GL825Ua/VL-730Ua/L812/EL8632Ua/
HL-4K32Ua/GL827Ua/VL-732Ua/L811+
* Design and specifications are subject to change without notice.
Resolution Native: 3840x 2160
Maximum: UHD (3,840 x 2,160)
Aspect ratio Auto, 4:3, 16:9, Full, L.Box
Projection lens F = 2, f = 24.85 mm,
1:1.0 Motorized Focus
Projection screen size (diagonal) 70" – 120" (1.78 m – 3.05 m)
Projection distance with clear
focus
0.059 m – 0.312 m (2.32" – 12.28")
Throw ratio 0.252 (100”@0.211 m)
Horizontal scan rate 15 – 100 KHz
Vertical refresh scan rate 24 – 120 Hz
Keystone correction +/-5 Degrees (Vertical & Horizontal), Manual
Audio 10W speaker x 2
Power consumption Standard mode: 370 W @100 VAC
ECO mode: 220 W @ 100 VAC
Standby mode: < 0.5 W
Power socket V
USB V
LAN V
USB Type C V
HDMI 1 V
HDMI 2 V
USB (for service) V
DC 12V OUT V
S/PDIF V
RS232 V
AUDIO OUT V
WIRELESS DONGLE V
I/O connectors
L811/EL8630Ua/HL-4K30Ua/GL825Ua/VL-730Ua/L812/
EL8632Ua/HL-4K32Ua/GL827Ua/VL-732Ua/L811+
38
English
Compatibility Modes
1 HDMI - PC Signal
Mode Resolution V.Frequency [Hz] H.Frequency
[KHz]
VGA_60
640 x 480
59.94 31.469
VGA_72 72.809 37.861
VGA_75 75 37.5
VGA_85 85.008 43.269
SVGA_56
800 x 600
56.25 35.156
SVGA_60 60.317 37.879
SVGA_72 72.188 48.077
SVGA_75 75 46.875
SVGA_85 85.061 53.674
SVGA_120 119.854 77.425
XGA_60
1024 x 768
60.004 48.363
XGA_70 70.069 56.476
XGA_75 75.029 60.023
XGA_85 84.997 98.667
XGA_120 119.804 98.958
SXGA_75 1152 x 864 75 67.5
SXGA_85 84.99 77.094
1280 x 720_60 1280 x 720 60 45
1280 x 720_120 120 90
WXGA_60
1280 x 768
59.87 47.776
WXGA_75 74.893 60.289
WXGA_85 84.837 68.633
WXGA_60 1280 x 800 59.81 49.702
WXGA_120 119.909 101.563
SXGA_60
1280 x 1024
60.02 63.981
SXGA_72 72 76.97
SXGA_75 75.025 79.976
SXGA_85 85.024 91.146
QuadVGA_60 1280 x 960 60 60
QuadVGA_75 75 75
1366 x 768_60 1366 x 768 59.79 47.712
WXGA+_60 1440 x 900 59.887 55.935
SXGA+_60 1400 x 1050 59.978 65.317
UXGA 1600 x 1200 60 75
39
English
2 HDMI - Video Signal
1680 x 1050_60 1680 x 1050 59.954 65.29
1920 x 1080_RB 1920 x1080 60 66.587
1920 x 1080_60 60 67.5
1920 x 1200 (Reduce
blanking) 1920 x 1200 59.95 74.038
MAC13 640 x 480@67Hz 66.667 35
MAC19 1024 x 768@75Hz 75.02 60.241
MAC21 1152 x 870@75Hz 75.06 68.68
1920 x 1080_120 1920 x 1080@120Hz 120 135
1920 x 1080_240 1920 x 1080@240Hz 239.76 291.309
1920 x 1440 1920 x 1440 60 90
2048 x 1152 2048 x 1152-RB 60 72
2048 x 1536 2048 x 1536-RB 60 94.769
3840 x 2160_24
3840 x 2160
24 54
3840 x 2160_25 25 56.25
3840 x 2160_30 30 67.5
3840 x 2160_50 50 112.5
3840 x 2160_60 60 135
Mode Resolution V.Frequency [Hz] H.Frequency [KHz]
480i 720 x 480
(1440 x 480) 60 15.73
480p 720 x 480 60 31.47
576i 720 x 576
(1440 x 576) 50 15.63
576p 720 x 576 50 31.25
720p/50p 1280 x 720 50 37.5
720p/60p 1280 x 720 60 45
1080/50i 1920 x 1080 50 28.13
1080/60i 1920 x 1080 60 33.75
1080/23.98P 1920 x 1080 23.98 26.97
1080/24P 1920 x 1080 24 27
1080/30P 1920 x 1080 33.75 30
1080/50P 1920 x 1080 50 56.26
1080/60P 1920 x 1080 60 67.5
2160/24P 3840 × 2160 24 54
2160/25P 3840 × 2160 25 56.25
2160/30P 3840 × 2160 30 67.5
2160/50P 3840 × 2160 50 112.5
2160/60P 3840 × 2160 60 135
40
English
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the device and receiver.
•Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
41
English
English
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Compliant with Russian/Ukraine/Belarus/Morocco regulatory certification
Radio device regulatory notice
Note: The regulatory information below is for models with
wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules).
Canada — Low-power license-exempt radio
communication devices (RSS-247)
a Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
List of applicable countries
This device must be used in strict accordance with the regulations and constraints in the
country of use. For further information, please contact a local office in the country of use.
Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.
42
English
EU Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
And,
Acer Italy s.r.l
Viale delle Industrie 1/A, 20020 Arese (MI), Italy
Tel: +39-02-939-921, Fax: +39-02-9399-2913
www.acer.it
Product:
DLP Projector
Trade Name:
Acer
Model Number:
RU Jan/Sr. Manager
Acer Incorporated (Taipei, Taiwan)
Date
July 23, 2021
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
Year to begin affixing CE marking 2021.
A4K2101/A4K2109
EN 55032:2015+AC:2016-07, Class B
EN 55024:2010+A1:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
LVD Directive: 2014/35/EU
RoHS Directive: 2011/65/EU
EN 50581:2012
ErP Directive: 2009/125/EC
Regulation (EU) No. 617/ 2013
Regulation (EC) No. 1275/2008; EN 50564:2011
Regulation (EU) No. 2019/1782; EN 50563:2011
We, Acer Incorporated, hereby declare under our sole responsibility that the product described
above is in conformity with the relevant Union harmonization legislations as below Directive
and following harmonized standards and/or other relevant standards have been applied:
EN 62368-1:2014+A11:2020
RED Directive: 2014/53/EU
EN 300 328 V2.2.2
EN 301 893 V2.1.1
EN 300 440 V2.2.1
Radio Equipment (WiFi Dongle) Type: UWA5
Operation frequency and radio-frequency power are listed as below:
WLAN 2.4GHz: 2412MHz-2462MHz < 20dBm
WLAN 5GHz: 5180MHz-5240MHz < 23dBm
WLAN 5GHz: 5745MHz-5825MHz < 23dBm
SKU Number: L811/EL8630Ua/HL-4K30Ua/GL825Ua/VL-730Ua/
L812/EL8632Ua/HL-4K32Ua/GL827Ua/VL-732Ua/L811+
AT BE DEBG CH CY CZ
DK EE HREL ES FI FR
HU IE LUIS IT LI LT
LV MT SENL PL PT RO
SI SK TR
EMC Directive: 2014/30/EU
EN 301 489-17 V3.2.2
EN 50566:2017
43
English
English
Acer America Corporation
333 West San Carlos St.,
Suite 1500
San Jose, CA 95110
U. S. A.
Tel: 254-298-4000
Fax: 254-298-4147
www.acer.com
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The following local Manufacturer /Importer is responsible for this declaration:
Product: DLP Projector
Trade Number: Acer
Model Number: A4K2101/A4K2109
SKU Number: L811/EL8630Ua/HL-4K30Ua/GL825Ua/
VL-730Ua/L812/EL8632Ua/HL-
4K32Ua/GL827Ua/VL-732Ua/L811+
Name of Responsible Party: Acer America Corporation
Address of Responsible Party: 333 West San Carlos St.
Suite 1500
San Jose, CA 95110
U. S. A.
Contact Person: Acer Representative
Phone No.: 254-298-4000
Fax No.: 254-298-4147