Table of Contents
Acer H6523BD User Manual
Displayed below is the user manual for H6523BD by Acer which is a product in the Data Projectors category. This manual has pages.
Related Manuals
Copyright © 2020. Acer Incorporated.
All Rights Reserved.
Acer Projector User's Guide
Original Issue: 03/2020
Acer Projector
H6522BD/V6510/H6518ST/X1527H/
H6523BD/E145F+/V150/E146S/
D656F/E147/HE-801K+/HT-800/
E145S+/M457/HE-803/H6517ABD+/
HV520/HE-802ST/AF610/GM514/
GM513/TH-420/HE-801ST+/HE-810/
VH-415/VH-413/H6517ST+/EV-F57/
H6522ABD/GM513S/BS-425/
VH-413S/DX525/X158H/KF320/
H6523ABD/H6541BD/H6541BD+/
X158HP/D1P1845/D1P1849/
D1P1848/D1P1915/D1P2001
User's Guide
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Model number: _________________________________
Serial number: __________________________________
Date of purchase: _______________________________
Place of purchase: ______________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product
names or trademarks are used herein for identification purposes only and belong to their respective
companies.
"HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC."
iii
Information for your safety and
comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•Install the power supply unit before connecting the power cord to the AC
power outlet.
•Unplug the power cord before removing the power supply unit from the
projector.
•If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•Do not use this product near water.
•Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
•Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
•This product should never be placed near or over a radiator or heat
register, or in a built-in installation unless proper ventilation is provided.
•Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
•To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
iv
•Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
•This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
•Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
•
If an extension cord is used with this product, make sure that the total ampere
rating of the equipment plugged into the extension cord does not exceed the
extension cord ampere rating. Also, make sure that the total rating of all
products plugged into the wall outlet does not exceed the fuse rating.
•Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
•This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.5 meters (15 feet) maximum length.
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•the power cord or plug is damaged, cut or frayed
v
•liquid was spilled into the product
•the product was exposed to rain or water
•the product has been dropped or the case has been damaged
•the product exhibits a distinct change in performance, indicating a need
for service
•the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•Do not look into the projector's lens when the lamp is on. The bright may
hurt your eyes.
•Turn on the projector first and then signal sources
•Do not place the product in following environments:
• Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector is necessary.
• Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
• Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shortening the life span and darkening the image.
• Locations near fire alarms.
• Locations with an ambient temperature above 40 ºC/104 ºF.
• Locations where the altitudes are higher than 10000 feet.
•Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
•Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
•Do not face the projector lens to the sun. It can lead to fire.
•When switching the projector off, suggest to ensure the projector
completes its cooling cycle before disconnecting power.
•Do not frequently turn off the main power abruptly or unplug the
projector during operation. The best way is to wait for the fan to turn off
before turning main power off.
vi
•Do not touch air outlet grille and bottom plate which becomes hot.
•Clean the air filter frequently if have. The temperature inside may rise and
cause damage when the filter/ventilation slots clogged with dirt or dust.
•Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
•Always open the lens shutter or remove the lens cap when the projector is
on.
•Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press
HIDE on the remote control.
•The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
•Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
•Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
•The product will detect the life of the lamp itself. Please be sure to change
the lamp when is showing warning message.
•When changing the lamp, please allow unit to cool down, and follow all
changing instructions.
•Reset the "Lamp Hour Reset" function from the Onscreen display
"Management" menu after replacing the lamp module.
•Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
•Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
•This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
•The projector should be placed in a horizontal way by means of desktop or
ceiling mount mode only, and its tilt angles should not exceed 6 degrees,
otherwise it would cause dramatical decrease of lamp life or severe safety
concern of system malfunction.
6°
6°
vii
Caution for Listening
To protect your hearing, follow these instructions.
•Increase the volume gradually until you can hear clearly and comfortably.
•Do not increase the volume level after your ears have adjusted.
•Do not listen to music at high volumes for extended periods.
•Do not increase the volume to block out noisy surroundings.
•Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit
http://www.acer-group.com/public/Sustainability/sustainability01.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org
Do not stare into the beam, RG2
"As with any bright source, do not stare into the direct beam, RG2 IEC 62471-
5:2015"
“Lamp(s) contain Mercury,
Dispose Properly.”
RG2
viii
First things first
Usage Notes
Do:
•Turn off the product before cleaning.
•Use a soft cloth moistened with mild detergent to clean the display
housing.
•Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•Block the slots and openings on the unit provided for ventilation.
•Use abrasive cleaners, waxes or solvents to clean the unit.
•Use under the following conditions:
•In extremely hot, cold or humid environments.
•In areas susceptible to excessive dust and dirt.
•Near any appliance that generates a strong magnetic field.
•Place In direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
•To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•Please do not open or disassemble the product as this may cause electric shock.
•When changing the lamp, please allow unit to cool down, and follow all changing
instructions.
•This product will detect the life of the lamp itself. Please be sure to change the lamp
when it shows warning messages.
•Reset the "Lamp Hour Reset" function from the Onscreen display "Management"
menu after replacing the lamp module.
•When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•Turn on the projector first and then the signal sources.
•Do not use lens cap when projector is in operation.
•When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the procedures listed under
"Replacing the Lamp (For service personnel only)".
ix
Cleaning the lens
•Before cleaning the lens, be sure to turn off the projector and unplug the
power cord to allow the projector to cool down for at least 30 minutes.
•Use a compressed air tank to remove the dust.
•Use a special cloth for cleaning lens and gently wipe the lens. Do not touch
the lens with your fingers.
•Do not use alkaline/acid detergents or volatile solvents such as alcohol for
cleaning lens. If the lens is damaged due to the cleaning process, it is not
covered by the warranty.
Warning:
•Do not use a spray containing flammable gases to remove dust or dirt from the lens.
This may cause a fire due to excessive heat inside the projector.
•Do not clean the lens if the projector is warming up as this may cause the lens’ surface
film to peel off.
•Do not wipe or tap the lens with a hard object.
x
Information for your safety and comfort iii
First things first viii
Usage Notes viii
Precautions viii
Cleaning the lens ix
Introduction 1
Product Features 1
Package Overview 2
Projector Overview 4
Projector Outlook 4
Control Panel 6
Remote Control Layout 7
MHL (Mobile High-Definition Link) Control 10
Getting Started 12
Connecting the Projector 12
Turning the Projector On/Off 14
Turning on the Projector 14
Turning the projector off 15
Adjusting the Projected Image 16
Adjusting the Height of Projected Image 16
How to get a preferred image size by adjusting
distance and zoom 17
User Controls 20
Installation menu 20
Onscreen Display (OSD) Menus 21
Color 22
Image 26
Setting 29
Management 32
Audio 34
3D 34
Language 35
Appendices 36
Contents
1
English
Introduction
Product Features
This product is a single-chip DLP® projector. Outstanding features include:
•DLP® technology
•Enables projecting 3D content via DLP Link Technology: Blue-Ray 3D
supported
•Acer ColorBoost technology delivers nature’s true colors for vivid, life-like
images
•High brightness and contrast ratio
•Acer LumiSense technology can intelligently optimize the projection
images to the most comfortable visual lumens automatically based on
display content.
•Versatile display modes enable optimum performance in any situation
•NTSC / PAL / SECAM compatible and HDTV (480i/p, 576i/p, 720p, 1080i/p)
supported
•Lower power consumption, economy (ECO) mode and EcoPro mode extend
lamp life
•Acer EcoProjeciton Technology delivers Intelligent power management
approach and physical efficiency improvement
•Equipped with HDMI™ & MHL connection supporting HDCP
•Smart detection delivers quick, intelligent source detection
•Multi-language onscreen display (OSD) menus
•Manual focus/zoom projection lens
•0.8 ~ 2X digital zoom and pan move function
•Microsoft® Windows® 2000, XP, Vista®, Windows 7, Windows 8.1,
Windows 10, Macintosh® OS compliant
•Support MHL V2.1 signal display
•Support LumiSense
•Support HDR format under 1080p resolution
•Support 1080P/120Hz
•Support 8.3ms low input lag
•Support Acer Display Widget
Note: Functions vary depending on model definition.
2
English
Package Overview
This projector comes with all the items shown below. Check to make sure your
unit is complete. Contact your dealer immediately if any thing is missing.
Projector Power cord HDMI cable (option)
VGA cable (option) Security card
(option)
User’s guide (option)
Quick start guide Carrying case
(option)
Remote control
AAA battery x2
(option)
WirelessCAST
(option)
WirelessHD-Kit
(option)
User's guide
(for multi-media and
wireless functions)
Quick start guide
(for multi-media and
wireless functions)
WirelessProjection-Kit
(option)
Quick Start Guide
Panduan ringkas
Stručná příručka
Hurtig start-guide
Schnellstartanleitung
Guía de inicio rápido
Höôùng daãn söû duïng nhanh
Guide de démarrage rapide
Vodič za brzi početak rada
Guida rapida
Gyors üzembe helyezési útmutató
Snelstartgids
Hurtigstartveiledning
Instrukcja szybkiego uruchomienia
Guia de consulta rápida
Краткое руководство
Hızlı başlangıç kılavuzu
Ghid de pornire rapidă
Priročnik za hiter začetek
Stručná príručka
Pikaopas
Snabbstartguide
Ръководство за бърз старт
Οδηγός γρήγορης εκκίνησης
פഀٺҢࡾࠒ
ڽବҵܶԧ
クイックスタートガイド
ว็รเดวร งา่ยอนาง้ชใม่ิรเรากอืมู่ค
ꠕꌭ겑녆ꐺ
Vodič za brzo učenje i početak rada
Керівництво для швидкого
початку експлуатації
DC 5V IN
MHL HDMI
3
English
Note: When projecting a 4K2K/60Hz signal, use an HDMI Premium
certified 4K2K/60Hz cable supporting 18Gbps bandwidth.
Trust the cable with the label
4
English
Projector Overview
Projector Outlook
Front / upper side
#Description #Description
1 Lamp cover 7 Focus ring
2 Air outlet 8 Remote control receiver
3 Control panel 9 Projection lens
4 Power button 10 Lens cap
5 Zoom ring 11 Tilt adjusting wheels
6 Air inlet
11
231
9
10
8
7
5
6
4
9
10
8
7
6
5
English
Rear side
Note: Functions vary depending on model definition.
#Description #Description
1 Power socket 6 Kensington™ lock port
2 HDMI connector 7 Composite video input connector
3 HDMI (MHL) connector 8 Audio in connector
4 DC 5V output (service) 9 Audio out connector
5 PC analog signal/HDTV/component
video input connector
10 RS232 connector
4 75 961 832
5
2
9
87
104
6
English
Control Panel
Note: Functions vary depending on model definition.
#Icon Function Description
1 POWER POWER Power Indicator LED
2 LAMP LAMP Lamp Indicator LED
3 TEMP TEMP Temp Indicator LED
4POWER See the contents in "Turning the Projector
On/Off" section.
5Four directional select
keys
Use to select items or make
adjustments to your selection.
6 BACK BACK Returns to the previous operation.
7 SOURCE SOURCE Changes the active source.
8 ENTER ENTER Confirm your selection of items.
9KEYSTONEAdjusts the image to compensate for
distortion caused by tilting the projector.
10 MENU MENU Press "MENU" to launch the Onscreen
display (OSD) menu or exit the OSD menu.
21
106
4 7
9
5
3
8
7
English
Remote Control Layout
#Icon Function Description
1Infrared
transmitter Sends signals to the projector.
2 POWER Refer to the "Turning the Projector On/Off" section.
1
6
5
26
8
9
10
11
18
12
13
14
15
16
17
19
20
21
22
23
24
25
4
2
7
Model No:J-25091
MC.JQ011.004
1
6
5
7
8
9
10
11
18
12
13
14
15
16
17
19
20
21
22
23
24
25
4
2
3
Model No:T-2502
MC.JPQ11.004
Model No:T-2501
MC.JPQ11.003
27
1
3
2
4
6
5
7
8
9
10
11
18
12
13
14
15
16
17
19
20
21
22
23
24
25
28
Model No:J-25050
MC.JMV11.009
Model No:J-25021
MC.JMV11.006
8
English
3 MUTE To turn on/off the volume.
4 RATIO To choose the desired aspect ratio.
5Select/Enter Confirm your selection of items.
Play/Pause Press to begin/pause playback.
6
Four
directional
select keys
Use up, down, left, right buttons to select items or make
adjustments to your selection.
7 3D Press "3D" to select 3D models.
8 SOURCE Changes the active source.
9 MODE Chooses a display mode.
10 KEYSTONE Adjusts the image to compensate for distortion caused
by tilting the projector.
11 BACK Returns to the previous operation.
STOP Press to stop playback.
12 VGA
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
13 FREEZE To pause the screen image.
14 PgUp
For computer mode only. Use this button to select the
previous page. This function is only available when USB
Ctrl connector (mini type B) is connected to a computer
via a USB cable.
15 COMPONENT No function.
16 PgDn
For computer mode only. Use this button to select the
next page. This function is only available when USB Ctrl
connector (mini type B) is connected to a computer via a
USB cable.
17 MEDIA Press "MEDIA" to return to the home page of media
mode.
18 KeyPad 0~9 Press "0~9" to input a password in the "Security" OSD.
19 MENU Press "MENU" to launch the Onscreen display (OSD)
menu or exit the OSD menu.
20 HDMI™/MHL To change source to HDMI/MHL.
21 HIDE Momentarily turns off the video. Press "HIDE" to hide
the image, press again to display the image.
#Icon Function Description
9
English
Note: Functions vary depending on model definition.
22 ZOOM IN Zooms the projector display in.
23 VIDEO To change source to COMPOSITE VIDEO.
24 ZOOM OUT Zooms the projector display out.
25 LAN/WiFi No function.
26 Backlight Remote backlight.
27 Laser pointer Aim the remote at the viewing screen.
28 Laser button Aim the remote at the viewing screen, press and hold
this button to activate the laser pointer.
#Icon Function Description
10
English
MHL (Mobile High-Definition Link) Control
#Icon Function Description
1 SOURCE Press the "SOURCE" button to toggle between
Navigation, Numeric and Multi-Media mode.
2MODE
•Press "MODE" button for one second to activate
the MHL Control Mode.
•To exit, press the "MODE" button again.
3Volume UP Increases the volume. (only for Multi-Media mode)
4Volume Down Decreases the volume. (only for Multi-Media mode)
5
Select/Enter Press to select/enter the file. (only for Navigation mode)
Play/Pause Toggles between playback and pause. (only for Multi-
Media mode)
6MENU
Press to launch the root memu.
(only for Navigation mode)
7
Four
directional
select keys
Use up, down, left, right buttons to select items or make
adjustments to your selection.
(only for Navigation mode)
7
1
2
8
10
6
9
5
3
4
7
1
2
8
10
6
9
5
3
4
7
2
8
10
6
3
4
9
1
5
11
English
Note: Functions vary depending on model definition.
8Back/Exit
•Press "BACK" to go back one menu step.
•To exit the file.
(only for Navigation mode)
Stop Discontinues playback. (only for Multi-Media mode)
9PgUp/PgDn
Use the button to select the next or previous page. (only
for Navigation mode)
10 KeyPad 0~9 Number buttons. (only for Numeric mode)
#Icon Function Description
12
English
Getting Started
Connecting the Projector
11
13
R
L
HDTV adapter
RCA
46
2
10
10
3
3
3
9
5
5
8
7
12
2
2
1
14
Smart devices
Video output
Display
Screen
Speakers
3D IR emitter
13
English
Note 1:
To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible with
the projector.
Note 2:
Functions vary depending on model definition
Note 3:
USB cable needs powered extender if the length is over 5 m.
Note 4:
Some smartphones require a converter (supplied by
smartphone maker) to enable the MHL function.
Note 5:
USB DC 5V out connector support 5V power output for
power bank charging only when MHL source is not detected.
Note 6:
VGA OUT loops through for VGA IN 1 only.
Note 7:
Some smart devices require a converter (supplied by the
smart device maker) to enable the MHL function.
Note 8:
Compatible HDMI/MHL dongles: WirelessHD (MWIHD1),
MWA3, Chromecast™.
#Description #Description
1 Power cord 8 RS232 cable
2 Audio cable 9 WirelessHD dongle
3 HDMI (MHL) cable 10 Wireless dongle
4 VGA to component/HDTV adapter 11 Wired remote control
5 VGA cable 12 LAN cable
6 3 RCA component cable 13 12V DC cable
7 Composite video cable 14 3D SYNC cable
14
English
Turning the Projector On/Off
Turning on the Projector
1 Ensure that the power cord and signal cable are securely connected. The
Power indicator LED will flash red.
2 Turn on the projector by pressing "Power" button on the control panel or
remote control, and the Power indicator LED will turn blue.
3 Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
• If the screen displays "Lock" and "Source" icons, it means the
projector is locked onto a specific source type and there is no such
type of input signal detected.
• If the screen displays "No Signal", please make sure the signal cables
are securely connected or press source direct key.
• If you connect to multiple sources at the same time, use the "Source"
button on either control panel or the remote control or direct source
key on the remote control to switch between inputs.
15
English
Turning the projector off
1 To turn the projector off, press and hold the power button. This message
appears: "Please press the power button again to complete the shutdown
process." Press the power button again.
2 The LED power indicator will turn RED and blink rapidly after the projector
is turned off, and the fan(s) will continue to operate for about 2 minutes to
ensure that the system cools properly. (only supported under "Instant
Resume" mode)
3 As long as the power cord remains plugged in, you can press the power
button to turn the projector immediately back on anytime during the 2-
minute shutdown process. (only supported under "Instant Resume" mode)
4 Once the system has finished cooling, the LED power indicator will stop
blinking and turn solid red to indicate standby mode.
5 It is now safe to unplug the power cord.
Warning indicators:
•"Projector Overheated. Lamp will automatically turn off soon."
This onscreen message indicates that the projector has overheated.
The lamp with automatically turn off, the projector will automatically
shut down, and the LED temp indicator will turn solid red. Contact
your local dealer or service center.
•"Fan failed. Lamp will automatically turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down,
and the LED temp indicator will blink. Contact your local dealer or
service center.
Note 1: Whenever the projector automatically shuts down and the
LED lamp indicator turns solid red, contact your local reseller or
service center.
Note 2: Functions vary depending on model definition.
Attention! The projector will enter a two minute cool down
period to ensure continued optimal lamp operation.
Attention! Please do not turn off projector within 1 minute after
power on.
16
English
Adjusting the Projected Image
Adjusting the Height of Projected Image
The projector is equipped with elevator feet for adjusting the height of image.
To raise/lower the image:
Use Tilt adjusting wheel to fine-tune the display angle.
Tilt adjusting wheel
17
English
How to get a preferred image size by adjusting
distance and zoom
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring.
•1080p series with a zoom ratio of 1.1x and a throw ratio of 1.47~1.62:1
To obtain an image size of 60" set the projector at a distance 2.0 m and 2.2 m
from the screen.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
<A> W (cm) x H (cm) Max zoom
<B>
Min zoom
<C>
From base to top of
image
<D>
28 62 x 35 1.0 40
50 111 x 62 1.6 1.8 72
60 133 x 75 2.0 2.2 87
70 155 x 87 2.3 2.5 101
80 177 x 100 2.6 2.9 116
90 199 x 112 2.9 3.2 130
100 221 x 125 3.3 3.6 144
120 266 x 149 3.9 4.3 173
150 332 x 187 4.9 5.4 217
200 443 x 249 6.5 7.2 289
250 553 x 311 8.1 9.0 361
300 664 x 374 9.76 433
Zoom Ratio: 1.1x
A
C
D
B
Desired Distance
2.2 m
2.0 m
Height: 87 cm
from base to top of
image
60"
Desired
image size
18
English
•1080p series with a zoom ratio of 1.0x and a throw ratio of 0.5:1
To obtain an image size of 60" set the projector at a distance 0.7 m from the
screen.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
<A> W (cm) x H (cm) Max zoom
<B>
From base to top of image
<C>
45 100 x 56 0.5 65
50 111 x 62 0.6 72
60 133 x 75 0.7 87
70 155 x 87 0.8 101
80 177 x 100 0.9 116
90 199 x 112 1.0 130
100 221 x 125 1.1 144
120 266 x 149 1.3 173
150 332 x 187 1.7 217
180 398 x 224 2.0 260
200 443 x 249 2.2 289
247 553 x 311 2.8 361
303 671 x 377 3.3 438
Zoom Ratio: 1.0x
A
C
B
Desired Distance
0.7 m
Height: 87 cm
from base to top of
image
60"
Desired
image size
19
English
•1080p series with a zoom ratio of 1.1x and a throw ratio of 1.5~1.66:1
To obtain an image size of 60" set the projector at a distance 2.0 m and 2.2 m
from the screen.
Desired Image Size Distance (m) Top (cm)
Diagonal (inch)
<A> W (cm) x H (cm) Max zoom
<B>
Min zoom
<C>
From base to top of
image
<D>
27 60 x 34 1.0 39
50 111 x 62 1.7 1.8 72
60 133 x 75 2.0 2.2 87
70 155 x 87 2.3 2.5 101
80 177 x 100 2.7 2.9 116
90 199 x 112 3.0 3.3 130
100 221 x 125 3.3 3.7 144
120 266 x 149 4.0 4.4 173
150 332 x 187 5.0 5.5 217
200 443 x 249 6.6 7.3 289
250 553 x 311 8.3 9.2 361
300 664 x 374 9.96 433
Zoom Ratio: 1.1x
A
C
D
B
Desired Distance
2.2 m
2.0 m
Height: 87 cm
from base to top of
image
60"
Desired
image size
20
English
User Controls
Installation menu
The installation menu provides an onscreen display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No signal
input" is displayed on the screen.
The menu options include settings and adjustments for screen size and distance,
focus, keystone correction and more .
1 Turn on the projector by pressing "Power" button on the control pad.
2 Press the "MENU" button on the remote control to launch the OSD for
projector installation and maintenance.
3 The background pattern acts as a guide to adjusting the calibration and
alignment settings, such as screen size and distance, focus and more .
4 The Installation menu includes the several options.
Use the up and down arrow keys to select an option, the left and right
arrow keys to adjust selected option settings, and the "ENTER" to enter a
submenu for feature setting. The new settings will be saved automatically
upon exiting the menu.
5 Push the "MENU" or "BACK" button anytime to exit the menu and return
to the Acer welcome screen.
Note: Functions vary depending on model definition.
21
English
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments
and change a variety of settings.
Using the OSD menus
•To open the OSD menu, press "MENU" on the remote control or control
panel.
•When the OSD is displayed, use the keys to select any item in the
main menu. After selecting the desired main menu item, press "ENTER" to
enter submenu for feature setting.
•Use the keys to select the desired item and adjust the settings by
using the keys.
•Select the next item to be adjusted in the submenu and adjust as described
above.
•Press "BACK" on the remote control or control panel, the screen will return
to the main menu.
•To exit OSD, press "BACK" on the remote control or control panel. The
OSD menu will close and the projector will automatically save the new
settings.
Note 1: Some of the following OSD settings may not be available. Please
refer to the actual OSD of your projector.
Note 2: Functions vary depending on model definition.
Main menu
Sub menu
Setting
22
English
Color
LumiSense Acer LumiSense technology can intelligently optimize the
projection images to the most comfortable visual lumens
automatically based on display content. The feature greatly
enhances dark detail visibility and color saturation.
•Off: Default setting.
•Normal: Select "Normal" to meet the visual effect of dark
detail enhancement.
•Boost: Select "Boost" to meet the visual effect of brightness
boost.
•Dynamic Black:automatically optimize the display of dark
movie scenes enabling them to be shown in incredible detail.
<Note>: Once LumiSense is enabled, BluelightShield switches to
“Off”.
BluelightShield •Off: Default setting.
•Low / Medium / High: Select Low / Medium / High to reduce
different exposure levels of blue light dynamically.
<Note>: Once BluelightShield is enabled, LumiSense switches to
“Off”.
Display Mode There are many factory presets optimized for various types of
images.
•Bright: For brightness optimization.
•Presentation: For meeting presentation.
•Standard: For common environment.
•Video: For playing video in a bright environment.
•Game: For game content.
•Education: For education environment.
•Movie: For brighter and general movie/video/photo playing.
•Game Dark: Play game in the dark environment.
•Game Bright: Play game in the bright environment.
•sRGB: standard RGB color space.
•Football: For football performance.
•Dark Cinema: For dark movie content.
•Rec. 709: standard Rec. 709 color space.
•ISF Day: Calibrate and optimize the projection image based
on bright environment by an ISF Certified technician.
•ISF Night: Calibrate and optimize the projection image based
on dark environment by an ISF Certified technician.
•
Game Auto: For game content and automatically adjusts image
contrast and saturation according to the displayed content.
•Dark FPS: For darker game content and brings out more
details in the darker areas.
•Bright FPS: For brighter game content and increases image
contrast and saturation.
•EcoPro: For extending lamp life.
•User: Memorize user's settings.
23
English
Color Profile User can choose all the display mode setting as reference setting of
the current "User 1", "User 2" or "User 3" except itself. When User
choose the display mode "User 1", "User 2" and "User 3", then OSD
will showup the "color profile" and "rename". Both of User1/
User2/User3 are default Standard.
Wall color Use this function to choose a proper color according to the wall.
There are several choices, including white, light yellow, light blue,
pink, dark green. It will compensate the color deviation due to the
wall color to show the correct image tone.
Brightness Adjust the brightness of the image.
•Press to darken the image.
•Press to lighten the image.
Contrast "Contrast" controls the difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the
amount of black and white in the image.
•Press to decrease the contrast.
•Press to increase the contrast.
Saturation Adjusts a video image from black and white to fully saturated
color.
•Press to decrease the amount of color in the image.
•Press to increase the amount of color in the image.
Tint Adjusts the color balance of red and green.
•Press to increase the amount of green in the image.
•Press to increase the amount of red in the image.
Color
Temperature
Mode
Use this function to choose CT1, CT2, CT3, User mode.
R Gain
Adjusts the red gain for color temperature optimization.
G Gain
Adjusts the green gain for color temperature optimization.
B Gain
Adjusts the blue gain for color temperature optimization.
Gamma Effects the representation of dark scenery. With greater gamma
value, dark scenery looks brighter.
24
English
Advanced Ind. Color Management
Adjusts the red, green, blue, cyan, yellow and magenta colors.
Ind. Hue
Adjusts the color balance of red and green.
Ind. Saturation
Adjusts the selected color to be less or more saturated color.
Ind. Gain
Adjusts the selected color's contrast.
Brilliant Color
Produces an expanded on-screen color spectrum that delivers
enhanced color saturation for bright, true-to-life images.
White Peaking
Increases the brightness of whites that are near 100%. (video
sources only)
Film Mode
Sets the image optimized to 24-frame True Film mode.
Noise Reduction
Adjusts signal noise reduction."0" means the noise reduction is off,
">0" increase noise reduction.
Black Extension
This ensures optimum black level for each analog source.
Wall color
Use this function to choose a proper color according to the wall.
There are several choices, including white, light yellow, light blue,
pink, dark green. It will compensate the color deviation due to the
wall color to show the correct image tone.
ISF
1. The certified ISF technician will calibrate and optimize the
projection image according to your actual environment. The ISF
input password will be kept by technician only.
2. “ISF Day” and “ISF Night” will not be shown in display mode if
projector equipped with ISF function has not been calibrated by an
ISF certified technician. For more information, please go to ISF
official website: https://www.imagingscience.com and contact the
dealer located in your country.
3. The ISF calibration will be charged and guaranteed by ISF
certified calibrator, and thereby Acer is not responsible for the
calibration service.
Low Input Lag
Use this function to make the projected screen smoothly without
any lag.
<Note> When the setting is set to "On", the 3D/Aspect Ratio/
Keystone/H. Position/V. Position/HDMI Scan Info/Tracking/Digital
Zoom function will be reset to its factory default settings.
25
English
Note 1: "Saturation" and "Tint" functions are not supported under
computer or HDMI mode.
Note 2: Functions vary depending on model definition.
Rename
1. When User choose the display mode "User 1", "User 2" or "User
3", then OSD will showup the "color profile" and "rename"
2. Timely saved when user change the name.
3. Only English is supported. When user changes any kind of system
languages, show the English characters which user renamed.
26
English
Image
Projection • Front: The factory default setting.
• Rear: Reverses the image so you can project from behind a
translucent screen.
• Rear-Ceiling: When you select this function, the projector
reverses and inverts the image at same time. You can project from
behind a translucent screen with ceiling mounted projection.
• Front-Ceiling: When you select this function, the projector
•inverts the image for ceiling-mounted projection.
Projection Mode
• Front: The factory default setting.
• Rear: Reverses the image so you can project from behind a
translucent screen.
Projection Location
• Auto: Automatically adjusts projection location of image.
• Desktop
• Ceiling: Turns the image upside down for ceiling-mounted
projection.
Aspect Ratio Use this function to choose your desired aspect ratio.
•Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
•Full: Resize image to fit full screen by width (3840 pixels) and
height (2160 pixels).
•4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
•16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
•L.Box: Keep original signal aspect ratio and zoom in by 1.333
times.
Keystone Adjust image distortion caused by tilting projection.
Auto Keystone Automatically adjusts vertical image.
Manual Keystone Adjust image distortion caused by tilting projection.
<Note> The Manual Keystone function is unavailable under Auto
Keystone setting to "On".
27
English
H./V. Keystone H. Keystone
Press the or button to adjust image distortion horizontally
and makes a squarer image.
V. Keystone
Press the or button to adjust image distortion vertically and
makes a squarer image.
4 Corner
Correction
Manually adjusts the shape and size of an image that is unevenly
rectangular on all sides. Press "MODE" repeatedly to select the corner
that you wish to adjust. Press four directional selection keys to adjust
the image shape.
<Note> The function is unavailable when H./ V. Keystone is adjusted.
Digital Zoom Out
(Install)
Sets the default size of the projected image. You can further zooms in
or out the image by pressing or . Using the functions of
Digital Zoom Out (Install) and Image Shift together helps you fit the
projected image full screen without adjusting the existing ceiling
mount settings.
Image Shift Shifts the projected image by pressing . When Native
Resolution is WUXGA, this functions is only available when the setting
of Digital Zoom Out (Install) is less than 1.0.
Sharpness Adjusts the sharpness of the image.
•Press to decrease the sharpness.
•Press to increase the sharpness.
H. Position
(Horizontal
position)
•Press to move the image left.
•Press to move the image right.
V. Position
(Vertical position) •Press to move the image down.
•Press to move the image up.
Frequency "Frequency" changes the projector's refresh rate to match the
frequency of your computer’s graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Tracking Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
HDMI Color Range Adjust the color range of the HDMI image data to correct color display
error.
•Auto: Automatically adjust by information from player.
•
Limited Range: Prosess the input image as limited color range data.
•Full Range: Prosess the input image as full color range data.
28
English
Note 1: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under HDMI or Video mode.
Note 2: "HDMI Color Range" and "HDMI Scan Info" functions are only
supported under HDMI mode.
Note 3: Functions vary depending on model definition.
HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen.
•Auto: Automatically adjust by information from player.
•Underscan: Always no overscan on HDMI image.
•Overscan: Always keep overscan on HDMI image.
29
English
Setting
Startup Screen Use this function to select your desired startup screen. If you
change the setting, the changes will take effect when you exit the
OSD menu.
•Acer: The default startup screen of your Acer projector.
•User: Use memorize picture from "Screen Capture" function.
Screen Capture Use this function to customize the startup screen. To capture the
image that you want to use as the startup screen, follow the
instructions below.
Notice:
Before proceeding with the following steps, make sure that the
"Keystone" is set to the default value 0.
•Press "Screen Capture" to customize the startup screen.
•Pop message to suggest user to input native source. The
"resolution" shown in the text is based on native timing. Press
"Start" to go next UI; press "Back" to previous UI .
•A dialog box appears to confirm the action. Show a message:
Adjust your desired image in the red frame and system will
capture your image after pressing "ENTER". Choose "ENTER"
to use the current image as your customized startup screen.
Choose "Back" to cancel the screen capture and exit the
onscreen display (OSD).
•A message appears, stating that the screen capture is in
progress.
•When the screen capture is finished, the message disappears
and the original display is shown.
•The customized startup screen takes effect when there is a
new input signal or when you restart the projector.
Source Selection Manual by source menu, Auto by Smart Detection.
Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3,
CC4, (CC1 displays captions in the primary language in your area).
Select "Off" to turn off the captioning feature. This function is only
available when a composite video or S-Video input signal is
selected and its system format is NTSC.
<Note> Set your screen aspect ratio to 4:3. This function is not
available when the aspect ratio is "16:9" or "Auto" .
DC 5V Out Default is "On". Choose "Off" to Disable DC 5V Out connection.
<Note>
5V power output if MHL source is not detected.
Warning! The DC 5V Out may happen power conflict if connecting
to PC and result in electric shock and/or injury.
VGA OUT (Standby) Default is "Off". Choose "On" to enable VGA OUT connection.
HDMI CEC Default is "Off". Choose "On" to enable HDMI CEC function.
30
English
Security Security
This projector provides a useful security function for the
administrator to manage usage of the projector .
Press "ENTER" to change the "Security" setting. If the security
function is enabled, your must enter the "Administrator Password"
first before changing the security settings.
•Select "On" to enable the security function. The user has to
enter a password to operate the projector. Please refer to the
"User Password" section for details.
•If "Off" is selected, then the user can turn on the projector
without password.
Timeout(Min.)
Once "Security" is activated to "On", the administrator can set
timeout function.
•Press or to select the timeout interval.
•The range is from 10 minute to 990 minutes.
•When the time is up, the projector will prompt the user to
enter the password again.
•The factory default setting of "Timeout(Min.)" is "Off".
•Once the security function is enabled, the projector will
request user to enter password when switch on the projector .
Both "User Password" and "Administrator Password" can be
accepted for this dialogue.
User Password
•Press "ENTER" to setup or change the "User Password".
•Press number keys to set your password on the remote control
and press "ENTER" to confirm.
•Press to delete character.
•Enter the password when you see "Confirm Password"
displayed.
•The password should be between 4 and 8 characters long.
•If you select "Request password only when plugging the
power cord in.", the projector will prompt the user to enter
the password every time the power cord is plugged.
•If you select "Always request password while projector turns
on.", the user has to enter the password every time when the
projector is turned on.
Administrator Password
The "Administrator Password" can be used in both the "Enter
Administrator Password" and "Enter Password" dialog boxes.
•Press "ENTER" to change the "Administrator Password".
•The factory default of "Administrator Password" is "1234".
If you forgot your administrator password, do the following to
retrieve the administrator password:
•An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number which will be accepted by
projector anytime no matter what the Administrator
Password is.
•If losing this security card and number, please contact with an
Acer service center.
31
English
Note: Functions vary depending on model definition.
Lock User Startup Screen
Default Lock User Startup Screen is "Off". If lock user startup screen
is "On", users cannot change startup screen anymore and avoid
other users change that arbitrarily. Choose "Off" to unlock startup
screen.
Network LAN IP/Mask
Identify IP and Mask address.
WiFi IP/Mask
Identify IP and Mask address.
MAC Address
Identify MAC address.
Wake on LAN (Standby)
Set to "On" to enable wake-on-LAN function to power on
projector via LAN under standby status. It is required to download
WOL (wake-on-LAN; WOL) tool or app for PC/Mobile by users for
this function.
DHCP
• On: Projector will obtain an IP address automatically from your
network.
• Off: Assign an IP address manually.
<Note>
1. Only available when DHCP set to Off, and will gray out if DHCP
set to On.
2. Press "Enter" to let users key in values and press "Enter" again to
save values temporarily.
3. Press "Apply" to confirm to save the settings for all in LAN
setting page.
<Note> Grey out when LAN isn't plugged in and LAN IP X.X.X.X
show 0.0.0.0
LAN Reset
Reset LAN function.
Reset Press the "ENTER" button and choose "Yes" to return the
parameters on all menus to the factory default settings.
32
English
Management
ECO Mode Choose "ECO" or "EcoPro" to dim the projector lamp, which will
also lower the power consumption, reduce noise, and extend the
lamp life. ("EcoPro" makes the lamp last longer.) Choose "Off" to
return to the normal mode.
<Note> Gray out ECO mode item while either Lumisense or
LumiSense+ or BluelightShield item is "On".
High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Turn Off Mode •Standard: Properly shuts down the projector after fan
cooling.
•Instant Resume: Resumes the system when the Power button
is pressed again within 2 minutes.
Auto Shutdown The projector will automatically shutdown when there is no signal
input after the allocated time. (default is 15 minutes)
Menu Display Time
(Seconds)
Choose the OSD menu display time. (Default is 15 seconds). Select
“Manual” to turn off main menu/one direct-key menu manually by
user.
Auto Power On AC Power On
Choose "On" to power on projector while AC power plug in.
Control Panel Lock Off
Default is set to “Off”.
Child Lock
•Enable “Child Lock” to disable the power key on projector
while in the standby mode to avoid power trigger from
children. (Take effect after power off).
•Disable “Child Lock” temporarily to turn on projector by
quick key, holding the power key on projector for 3 seconds.
No need to lock any key after power on.
Full Lock
•Enable “Full Lock” to lock all keys on projector. (Take effect
once done the setting; show warning message while user
presses keypad.)
•Disable “Full Lock” function, press “ENTER” key for 7 seconds.
And then, the OSD of “Control Panel Lock” is set to “Off” and
not required to go back to “Full Lock” again.
•Pop up a warning message: To disable “Full Lock” function,
press “ENTER” key for 7 second, while user presses any key on
keypad panel under "Full Lock" mode.
Lamp Information Lamp Hour Elapse
Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Lamp Hour Reset
Choose "Yes" and press "ENTER"to turn the lamp hour counter to
0 hours.
33
English
Note: Functions vary depending on model definition.
Information Display the projector information for Input Source, Signal Type,
Display Mode, Serial No., Software Version and QR code on the
screen.
Scan QR code linking to Acer projector portal via mobile.
34
English
Audio
Note: Functions vary depending on model definition.
3D
Note 1: It needs correct settings on graphic card 3D application program for
correct 3D display.
Note 2: The SW players, such as Stereoscopic Player and DDD TriDef Media
Player can support 3D format files. You can download these three players
on web page below,
- Stereoscopic Player (Trial):
http://www.3dtv.at/Downloads/Index_en.aspx
- DDD TriDef Media Player (Trial):
http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html
Note 3: "3D L/R Invert" is only available when 3D is enabled.
Volume •Press to decrease the volume.
•Press to increase the volume.
Mute •Choose "On" to mute the volume.
•Choose "Off" to restore the volume.
Power On/Off Volume Select this function to adjust the notification volume when
turning the projector on/off.
3D Choose "On" to enable DLP 3D function.
•On: Choose this item while using DLP 3D glasses, 120Hz 3D
capable graphics cards and HQFS format file or DVD with
corresponding SW player.
•Off: Turn off 3D mode.
3D Format If the 3D content is not displayed correctly, you can select a 3D
format that suits the 3D content you are viewing and obtain the
best result.
24P 3D Choose "96Hz" or "144Hz" to compatible with 3D glasses.
3D L/R Invert If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute "Invert" to get best match of
left/right image sequence to get the correct image (for DLP 3D).
3D Warning Message Choose "On" to display the 3D warning message.
35
English
Note 4: There has reminder screen if 3D still enable when power on projector.
Please adjust setting depended on your purpose.
Note 5: WUXGA model 24P 3D cannot be scaling due to TI ASIC buffer
memory limitation, and once detect 24P 3D (96Hz or 144Hz) inputs, Aspect
Ratio / HDMI Scan Info will be gray out, also HIDE will be not supported.
Language
Language Choose the multilingual OSD menu. Use the
key to select your preferred menu language.
•Press "ENTER" to confirm the selection.
36
English
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
# Problem Solution
1 No image appears
onscreen •Connected as described in the "Getting Started"
section.
•Ensure none of the connector pins are bent or
broken.
•Check if the projector lamp has been securely
installed. Please refer to the "Replacing the Lamp
(For service personnel only)" section.
•Make sure you have removed the lens cap and the
projector is switched on.
2 Partial, scrolling
or incorrectly
displayed image
(for PC (Windows
2000/XP/Vista/
Windows 7/
Windows 8))
•For an incorrectly displayed image:
•Open "My Computer", open the "Control
Panel", and then double-click the "Display"
icon.
•Select the "Settings" tab.
•Verify that your display resolution setting is
lower than or equal to WUXGA-RB (1920 x
1200).
•Click the "Advanced Properties" button.
If the problem still appears, change the monitor display
you are using and follow the steps below:
•Verify that the resolution setting is lower than
or equal to WUXGA-RB (1920 x 1200).
•Click the "Change" button under the
"Monitor" tab.
•Click "Show all devices". Next, select "Standard
monitor types" under the SP box, and choose
the resolution mode you need under the
"Models" box.
•Verify that the resolution setting of the
monitor display is lower than or equal to
WUXGA-RB (1920 x 1200).
37
English
3 Partial, scrolling
or incorrectly
displayed image
(For notebooks)
•For an incorrectly displayed image:
•Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4],
NEC [Fn]+[F3], Toshiba [Fn]+[F5]
•If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
4 The screen of the
notebook
computer is not
displaying your
presentation
•If you are using a Microsoft® Windows® based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
•If you are using an Apple® Mac® OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On".
5 Image is unstable
or flickering •Adjust the "Tracking" to correct it. Refer to the
"Image" section for more information.
•Change the display color depth settings on your
computer.
6 Image has vertical
flickering bar •Use "Frequency" to make an adjustment. Refer to
the "Image" section for more information.
•Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
7 Image is out of
focus •Make sure the lens cap is removed.
•Adjusts the focus ring on the projector lens.
•Make sure the projection screen is within the
required distance from the projector. Refer to the
"How to get a preferred image size by adjusting
distance and zoom" section for more information.
8 Image is stretched
when displaying a
"widescreen"
DVD title
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•If you play a 4:3 format DVD title, please change the
format to 4:3 in the projector OSD.
•If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
•If you play an Letterbox (LBX) format DVD title,
please change the format to Letterbox (LBX) in the
projector OSD.
38
English
9 Image is too small
or too large •Adjust the zoom ring on the projector.
•Move the projector closer to or further from the
screen.
•Press "MENU" on the remote control. Go to "Image -
-> Aspect Ratio" and try different settings or press
"RATIO" on the remote control to adjust directly.
10 Image has slanted
sides •If possible, reposition the projector so that it is
centered on the screen.
•Press the "Keystone / " button on the remote
control until the sides are vertical.
11 Image is reversed •Select "Image --> Projection Mode" on the OSD and
adjust the projection direction.
12 LAN/WiFi, USB
Display source
show No signal
•Power off peojector and power on again.
13 Image hangs up
when displaying
photo or
document in
Media
•Power off peojector and power on again.
39
English
OSD Messages
Problems with the Projector
# Condition Message Reminder
1 Message •Fan Fail - the system fan is not working.
•Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed
to cool down before it may be used. Please check the
following message.
Please also check the dust filters if they are installed. If the
dust filter is clogged with dust, please clean it.
•Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
# Condition Solution
1 The projector stops responding
to all controls
•If possible, turn off the projector, then
unplug the power cord and wait at
least 30 seconds before reconnecting
power.
•Make sure that the control panel lock
function is disabled.
2 Lamp burns out or makes a
popping sound
•When the lamp reaches the end of its
useful life, it will burn out and may
make a loud popping sound. If this
happens, the projector will not turn on
until the lamp module has been
replaced. To replace the lamp, follow
the procedures in the "Replacing the
Lamp (For service personnel only)"
section.
40
English
LED & Alarm Definition Listing
LED Messages
Message
Lamp_LED Temp_LED Power LED
Red Red Red Blue
Input power plug Flash ON to
OFF 100ms
Flash ON to
OFF 100ms
Flash ON to
OFF 100ms
--
Standby -- -- ON --
Power button ON -- -- -- ON
Lamp retry -- -- -- Quick
Flashing
Power off (Cooling state) -- -- Quick
Flashing
--
Power button OFF
(cooling completed;
standby mode)
-- -- ON --
Error (thermal failure) -- ON -- ON
Error (fan lock) -- Quick
Flashing
-- ON
Error (lamp breakdown) ON -- -- ON
Error (color wheel fail) Quick
Flashing
-- -- ON
41
English
Replacing the Lamp (For service personnel
only)
The projector will detect the lamp life. You will be shown a warning message
"Lamp is approaching the end of its useful life in full power operation.
Replacement suggested!" When you see this message, change the lamp as soon
as possible. Make sure the projector has been cooling down for at least 45
minutes before changing the lamp.
Warning: The lamp compartment is hot! Allow it to cool down
before changing the lamp.
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
Warning: Do not attempt to replace the lamp yourself. Contact
the qualified service personnel for replacement.
42
English
Ceiling Mount Installation
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
1 Drill four holes into a solid, structural ceiling member, and secure the
ceiling mount base to the ceiling.
2 Choose the length combination based on actual environment. (CM-01S
doesn’t include Type 2 and Type 3.)
Type 1 Type 2 Type 3
43
English
3 Type 1:
For the standard size use three bracket screws to mount the projector to
the ceiling mount bracket.
Type 2 and Type 3:
Alternatively, for the larger size, use the sliding extensions for more
supports.
Note: It is recommended that you keep a reasonable space
between the bracket and the projector to allow for proper heat
distribution.
4 Connect the main body connector to the projector bracket (illustration 1),
and then screw up four screws (illustration 2).
Type 1: Type 2: Type 3:
Illustration 1 Illustration 2
44
English
5 Adjust the angle and positioning as necessary.
Screw Type B Washer Type
Diameter (mm) Length (mm) Large Small
425VV
360°
55.00mm 55.00mm
313.50mm
8.00mm
107.00mm
113.68mm
100.18mm
48.19mm
254.10mm
169.80mm
82.30mm
255.25mm
SCREW SPEC. M4 x 25 mm
45
English
Specifications
The specifications listed below are subject to change without notice. For final
specs, please refer to Acer's published marketing specifications.
Projection system DLP®
Computer compatibility IBM PC and compatibles, Apple Macintosh, iMac and
VESA standards: SXGA, XGA, VGA, SVGA, SXGA+,
WXGA, WXGA+, WSXGA +
Video compatibility NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/
K/K1/L), HDTV (720p, 1080i, 1080p), EDTV (480p,
576p), SDTV (480i, 576i)
Displayable colors 1.07 billion colors
Horizontal scan rate 15 - 100 kHz
Vertical refresh scan rate 24 - 120 Hz
Digital zoom 0.8x ~ 2.0x
Power supply AC input 100 - 240 V auto-switching power supply
Operating temperature 0ºC to 40ºC / 32ºF to 104ºF
Standard package contents •AC power cord x1
•HDMI cable x1 (option)
•VGA cable x1 (option)
•Remote control x1
•AAA battery x2 (for remote control) (option)
•User’s guide (Projector) (CD-ROM) x1
•User's guide (Media/Wireless function) (CD-ROM)
x1 (option)
•Quick start guide (Projector) x1
•Quick start guide (Media/Wireless function) x1
(option)
•Security card x1 (option)
•Carrying case x1 (option)
46
English
\
H6522BD/V6510/E145F+/V150/HE-801K+/HT-800/H6517ABD+/HV520/GM513/
TH-420/VH-413/H6522ABD/D1P1845/D1P1849
Resolution 1920x1080 1080p resolution
•Maximum: UXGA (1600 x 1200), WSXGA+
(1680x1050), 1080p(1920x1080), WUXGA-RB (1920
x 1200)
Aspect ratio Auto, Full, 4:3, 16:9, L.Box
Optical zoom ratio 1.1X
Throw ratio 1.47 ~ 1.62 (61"@2m)
Projection lens F = 2.1 ~ 2.31, f = 15.59 ~ 17.14mm, Manual Zoom &
Focus
Projection screen size (diagonal) 28" ~ 300" (71cm ~ 762cm)
Projection distance 1.0m ~ 9.8m (3.3' ~ 32.0')
Lamp type 240 W user-replaceable lamp
Audio Internal speaker with 3W x 1 output
Weight 2.8 Kg (6.17 lbs)
Dimensions (W x D x H)
(with feet)
313mm x 272.4mm x 110.7mm (12.3" x 10.7" x 4.4")
Power consumption Normal mode: 300W ± 10% @ 110VAC
ECO mode: 210W ± 10% @ 110VAC
Standby mode < 0.5W
I/O connectors
Power socket V
VGA IN V
Composite video V
3.5 mm audio jack input V
3.5 mm audio jack output V
5V DC output V
HDMI 1 V
HDMI 2/MHL V
47
English
\
Note 1: Design and specifications are subject to change without
notice.
Note 2: * Functions vary depending on model definition.
H6518ST/E146S/E145S+/HE-802ST/HE-801ST+/H6517ST+/GM513S/VH-413S/
D1P1848
Resolution 1920x1080 1080p resolution
•Maximum: UXGA (1600 x 1200), WSXGA+
(1680x1050), 1080p(1920x1080), WUXGA-RB (1920
x 1200)
Aspect ratio Auto, Full, 4:3, 16:9, L.Box
Optical zoom ratio 1.0X
Throw ratio 0.499 (100"@1.1m)
Projection lens F = 2.8, f = 7.42mm, Manual Focus
Projection screen size (diagonal) 45" ~ 300" (115cm ~ 762cm)
Projection distance 0.5m ~ 3.3m (1.6' ~ 10.9')
Lamp type 240 W user-replaceable lamp
Audio Internal speaker with 3W x 1 output
Weight 2.8 Kg (6.17 lbs)
Dimensions (W x D x H)
(with feet)
313mm x 272.4mm x 110.7mm (12.3" x 10.7" x 4.4")
Power consumption Normal mode: 300W ± 10% @ 110VAC
ECO mode: 210W ± 10% @ 110VAC
Standby mode < 0.5W
I/O connectors
Power socket V
VGA IN V
Composite video V
3.5 mm audio jack input V
3.5 mm audio jack output V
5V DC output V
HDMI 1 V
HDMI 2/MHL V
48
English
\
Note 1: Design and specifications are subject to change without
notice.
Note 2: * Functions vary depending on model definition.
X1527H/D656F/M457/AF610/HE-810/EV-F57/BS-425/DX525/KF320/H6541BD/
H6541BD+/X158HP/D1P1915
Resolution 1920x1080 1080p resolution
•Maximum: UXGA (1600 x 1200), WSXGA+
(1680x1050), 1080p(1920x1080), WUXGA-RB (1920
x 1200)
Aspect ratio Auto, 4:3, 16:9, L.Box
Optical zoom ratio 1.1X
Throw ratio 1.50 ~ 1.66 (60"@2m)
Projection lens F = 1.98 ~ 2.03, f = 15.84mm ~ 17.44mm, Manual
Zoom & Focus
Projection screen size (diagonal) 27" ~ 301" (69cm ~ 765cm)
Projection distance 1.0m ~ 10m (3.3' ~ 32.7')
Lamp type 240 W user-replaceable lamp
Audio Internal speaker with 3W x 1 output
Weight 2.9 Kg (6.4 lbs)
Dimensions (W x D x H)
(with feet)
313 mm x 247.4 mm x 110.7 mm (12.3" x 9.7"x 4.4")
Power consumption Normal mode: 290W ± 10% @ 110VAC
ECO mode: 210W ± 10% @ 110VAC
Standby mode < 0.5W
I/O connectors
Power socket V
VGA IN V
HDMI 1 V
HDMI 2 V
Composite video V
RS232 V
3.5 mm audio jack input V
3.5 mm audio jack output V
5V DC output V
49
English
\
Note 1: Design and specifications are subject to change without
notice.
Note 2: * Functions vary depending on model definition.
H6523BD/E147/HE-803/GM514/VH-415/H6522BD/H6522ABD/X158H/H6523ABD/
D1P2001
Resolution 1920x1080 1080p resolution
•Maximum: UXGA (1600 x 1200), WSXGA+
(1680x1050), 1080p(1920x1080), WUXGA-RB (1920
x 1200)
Aspect ratio Auto, 4:3, 16:9, L.Box
Optical zoom ratio 1.1X
Throw ratio 1.47 ~ 1.62 (61"@2m)
Projection lens F = 2.1 ~ 2.31, f = 15.59 ~ 17.14mm, Manual Zoom &
Focus
Projection screen size (diagonal) 28" ~ 300" (71cm ~ 762cm)
Projection distance 1.0m ~ 9.8m (3.3' ~ 32.0')
Lamp type 240 W user-replaceable lamp
Audio Internal speaker with 3W x 1 output
Weight 2.8 Kg (6.17 lbs)
Dimensions (W x D x H)
(with feet)
313 mm x 245.1 mm x 110.7 mm (12.3" x 9.6"x 4.4")
Power consumption Normal mode: 290W ± 10% @ 110VAC
ECO mode: 210W ± 10% @ 110VAC
Standby mode < 0.5W
I/O connectors
Power socket V
VGA IN V
HDMI 1 V
HDMI 2 V
Composite video V
RS232 V
3.5 mm audio jack input V
3.5 mm audio jack output V
5V DC output V
50
English
Compatibility modes
A. VGA Analog
1 VGA Analog - PC Signal
Modes Resolution V.Frequency [Hz] H.Frequency [KHz]
VGA 640x480 60 31.5
640x480 72 37.9
640x480 75 37.5
640x480 85 43.3
640x480 120 61.9
SVGA 800x600 56 35.1
800x600 60 37.9
800x600 72 48.1
800x600 75 46.9
800x600 85 53.7
800x600 120 77.4
XGA 1024x768 60 48.4
1024x768 70 56.5
1024x768 75 60.0
1024x768 85 68.7
1024x768 120 99.0
SXGA 1152x864 70 63.8
1152x864 75 67.5
1152x864 85 77.1
1280x1024 60 64.0
1280x1024 72 77.0
1280x1024 75 80.0
1280x1024 85 91.1
QuadVGA 1280x960 60 60.0
1280x960 75 75.2
SXGA+ 1400x1050 60 65.3
UXGA 1600x1200 60 75.0
PowerBook G4 640x480 60 31.4
PowerBook G4 640x480 66.6(67) 34.9
PowerBook G4 800x600 60 37.9
PowerBook G4 1024x768 60 48.4
PowerBook G4 1152x870 75 68.7
PowerBook G4 1280x960 75 75.0
i Mac DV (G3) 1024x768 75 60.0
51
English
2 VGA Analog - Extended Wide timing
3 VGA Analog -Component Signal
B. HDMI Digital
1 HDMI - PC Signal
Modes Resolution V.Frequency [Hz] H.Frequency [KHz]
WXGA 1280x768 60 47.8
1280x768 75 60.3
1280x768 85 68.6
1280x720 60 44.8
1280x720 120 92.9
1280x800 60 49.6
1280x800 119.909 101.6
1920x1200 60 74
1440x900 60 59.9
WSXGA+ 1680x1050 60 65.3
1920x1080
(1080P) 60 67.5
1366x768 60 47.7
WUXGA 1920x1200-RB 59.94 74.04
Modes Resolution V.Frequency [Hz] H.Frequency [KHz]
480i 720x480(1440x480) 59.94 (29.97) 15.7
576i 720x576(1440x576) 50(25) 15.6
480p 720x480 59.94 31.5
576p 720x576 50 31.3
720p 1280x720 60 45.0
720p 1280x720 50 37.5
1080i 1920x1080 60(30) 33.8
1080i 1920x1080 50(25) 28.1
1080p 1920x1080 23.97/24 27.0
1080p 1920x1080 60 67.5
1080p 1920x1080 50 56.3
Modes Resolution V.Frequency [Hz] H.Frequency [KHz]
VGA 640x480 60 31.5
640x480 72 37.9
640x480 75 37.5
640x480 85 43.3
52
English
2 HDMI - Extended Wide timing
640x480 120 61.9
SVGA 800x600 56 35.1
800x600 60 37.9
800x600 72 48.1
800x600 75 46.9
800x600 85 53.7
800x600 120 77.4
XGA 1024x768 60 48.4
1024x768 70 56.5
1024x768 75 60.0
1024x768 85 68.7
1024x768 120 99.0
SXGA 1152x864 70 63.8
1152x864 75 67.5
1152x864 85 77.1
1280x1024 60 64.0
1280x1024 72 77.0
1280x1024 75 80.0
1280x1024 85 91.1
QuadVGA 1280x960 60 60.0
1280x960 75 75.2
SXGA+ 1400x1050 60 65.3
UXGA 1600x1200 60 75.0
PowerBook G4 640x480 60 31.4
PowerBook G4 640x480 66.6(67) 34.9
PowerBook G4 800x600 60 37.9
PowerBook G4 1024x768 60 48.4
PowerBook G4 1152x870 75 68.7
PowerBook G4 1280x960 75 75.0
i Mac DV (G3) 1024x768 75 60.0
Modes Resolution V.Frequency [Hz] H.Frequency [KHz]
WXGA 1280x768 60 47.8
1280x768 75 60.3
1280x768 85 68.6
1280x720 60 44.8
1280x720 120 92.9
1280x800 60 49.6
1280x800-RB 119.909 101.6
1440x900 60 59.9
53
English
3 HDMI - Video Signal
4 HDMI - 1.4a 3D Timing
1920x1200 60 74
WSXGA+ 1680x1050 60 65.3
1920x1080
(1080P) 60 67.5
1920x1080
(1080P) 50 56.3
1366x768 60 47.7
WUXGA 1920x1200-RB 59.94 74.04
Modes Resolution V.Frequency [Hz] H.Frequency [KHz]
480i 720x480(1440x480) 59.94 (29.97) 15.7
576i 720x576(1440x576) 50(25) 15.6
480p 640x480 59.94/60 31.5
480p 720x480 59.94 31.5
576p 720x576 50 31.3
720p 1280x720 60 45.0
720p 1280x720 50 37.5
1080i 1920x1080 60(30) 33.8
1080i 1920x1080 50(25) 28.1
1080p 1920x1080 23.97/24 27.0
1080p 1920x1080 25 28.1
1080p 1920x1080 29.97/30 33.8
1080p 1920x1080 60 67.5
1080p 1920x1080 50 56.3
1080p 1920x1200-RB 59.94 74.04
Modes Resolution V.Frequency [Hz] H.Frequency [KHz]
720p (Frame Packing) 1280 x 720 50 37.5
720p (Frame Packing) 1280 x 720 60 45.0
1080p (Frame Packing ) 1920 x1080 24 27.0
720p (Frame Packing) 1280 x 720 50 37.5
720p (Frame Packing) 1280 x 720 60 45.0
1080i (Top and Bottom) 1920 x1080 50 (25) 28.1
1080i (Top and Bottom) 1920 x1080 60 (30) 33.8
1080p (Top and Bottom) 1920 x1080 24 27.0
1080p (Top and Bottom) 1920 x1080 50 56.3
1080p (Top and Bottom) 1920 x1080 60 67.5
54
English
C. MHL Digital
Note 1: Functions vary depending on model definition.
Note 2: MHL 1080p 3D 24p frame packing is not supported.
720p (Side by Side (Half)) 1280 x 720 60 45.0
1080i (Side by Side (Half)) 1920 x1080 50 (25) 28.1
1080i (Side by Side (Half)) 1920 x1080 60 (30) 33.8
1080p (Side by Side (Half)) 1920 x1080 50 56.3
1080p (Side by Side (Half)) 1920 x1080 60 67.5
Graphic source monitor
range limits
Horizontal scan rate: 15k-100kHz
Vertical scan rate: 24-120 Hz
Max. pixel rate: Analog:165MHz
Digital:165MHz
Modes Resolution V.Frequency
[Hz]
H.Frequency
[KHz]
VGA 640x480 59.94/60 31.5
480i 720x480 (1440x480) 59.94/60 15.7
576i 720x576 (1440x576) 50(25) 15.6
480p 720x480 59.94/60 31.5
480p_2x 1440x480 59.94/60 31.5
576p 720x576 50 31.3
576p_2x 1440x576 50 31.3
720p 1280x720 59.94/60 45.0
720p 1280x720 50 37.5
1080i 1920x1080 60(30) 33.8
1080i 1920x1080 50(25) 28.1
1080p 1920x1080 23.97/24 27.0
1080p 1920x1080 25 28.1
1080p 1920x1080 29.97/30 33.8
Graphic source monitor
range limits
Horizontal scan rate: 15k-50 kHz
Vertical scan rate: 24-60 Hz
Max. pixel rate: Digital: 75 MHz
55
English
English
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the device and receiver.
•Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
56
English
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Compliant with Russian/ Ukraine regulatory certification
Radio device regulatory notice
Note: The regulatory information below is for models with
wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules).
Canada — Low-power license-exempt radio
communication devices (RSS-247)
a Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
List of applicable countries
This device must be used in strict accordance with the regulations and constraints in the
country of use. For further information, please contact the local office in the country of use.
Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
And,
Acer Italy s.r.l.
Viale delle Industrie 1/A, 20020 Arese (MI), Italy
Tel: +39-02-939-921 ,Fax: +39-02 9399-2913
www.acer.it
Product: DLP Projector
Trade Name: Acer
Model Number: D1P1845/D1P1849/D1P1848/D1P1915/D1P2001
Marketing name:
H6522BD/V6510/H6518ST/X1527H/H6523BD/E145F+/V150/E146S/D656F/E147/HE-801K+/
HT-800/E145S+/M457/HE-803/H6517ABD+/HV520/HE-802ST/AF610/GM514/GM513/
TH-420/HE-801ST+/HE-810/VH-415/VH-413/H6517ST+/EV-F57/H6522ABD/GM513S/
BS-425/VH-413S/DX525/X158H/KF320/H6523ABD/H6541BD/H6541BD+/X158HP
Mar. 18, 2020
RU Jan / Sr. Manager Date
Acer Incorporated (Taipei, Taiwan)
We, Acer Incorporated, hereby declare under our sole responsibility that the product described above
is in conformity with the relevant Union harmonizaon legislaons: Direcve 2014/53/EU on Radio
Equipment, RoHS Direcve 2011/65/EU and ErP Direcve 2009/125/EC. The following harmonized
standards and/or other relevant standards have been applied:
Year to begin affixing CE marking 2020.
E
R
H
R
E
E
lectromag
n
EN 55032:2015+AC:2016, Class B
EN 61000-3-2:2014 Class D
EN 61000-3-3:2013
R
adio freq
u
EN 300 328 V2.1.1
EN 300 440-1 V1.6.1
EN 300 440 V2.1.1
EN 302 291-1 V1.1.1
H
ealthy an
d
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
EN 62209-1:2006
EN 62209-2:2010
R
oHS
EN 50581:2012
E
rP
Regulaon (EU) No. 617/ 2013
Regulaon (EC) No. 1275/ 2008; EN 50564:2011
n
ec comp
a
u
ency spect
d
Safety
a
bility
rum usage
EN 55024: 2010+A1:2015
EN 301 489-1 V2.1.1
EN 301 489-3 V2.1.1
EN 302 291-2 V1.1.1
EN 301 511 V9.0.2
EN 301 893 V2.1.1
EN 62311:2008
EN 62479:2010
Regulaon (EC) No. 278/2009; EN 50563:2011
EN 301 489-7 V1.3.1
EN 301 489-17 V3.1.1
EN 301 489-24 V1.5.1
EN 301 908-1 V7.1.1
EN 301 908-2 V6.2.1
EN 301 908-13 V6.2.1
EN 50360: 2001/A1: 2012
EN 50566:2013
EU Declaraon of Conformity
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The following local Manufacturer / Importer is responsible for this declaration:
rotcejorP PLD:tcudorP
Model Number:
D1P1845/D1P1849/D1P1848
Machine Type:
H6522BD/V6510/H6518ST/X1527H/H6523BD/
E145F+/V150/E146S/D656F/E147/HE-801K+/
HT-800/E145S+/M457/HE-803/H6517ABD+/
HV520/HE-802ST/AF610/GM514/GM513/TH-420/
HE-801ST+/HE-810/VH-415/VH-413/H6517ST+/
EV-F57/H6522ABD/GM513S/BS-425/VH-413S/
DX525/X158H/KF320/H6523ABD/H6541BD/
H6541BD+/X158HP
Name of Responsible Party: Acer America Corporation
Address of Responsible Party: 333 West San Carlos St.
Suite 1500
San Jose, CA 95110
U. S. A.
Contact Person: Acer Representative
Phone No.: 254-298-4000
7414-892-452:.oN xaF
Acer America Corporation
333 West San Carlos St.,
Suite 1500
San Jose, CA 95110
U. S. A.
Tel: 254-298-4000
Fax: 254-298-4147
www.acer.com