Table of Contents
Acer X168H User Manual
Displayed below is the user manual for X168H by Acer which is a product in the Data Projectors category. This manual has pages.
Related Manuals
Acer Projectors
with 3D Technology
Quick Guide
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
© 2014 All Rights Reserved.
Acer Projector Series Quick Guide
Original Issue: 10/2014
3
English
The Acer projector you have bought has integrated DLP technology.
If you have connected your projector to a computer, please read sections
"Using DLP 3D / NVIDIA 3DTV Play technology" on page 4.
If you have connected your projector to a DVD or Blu-ray player, please read
"Watching 3D DVD or Blu-ray content" on page 7.
Important: When you turn the 3D technology on, you will be
shown a reminder that 3D is enabled. If you do not wish to view
3D content, you should turn it off, otherwise the image may not
be projected at full brightness.
Using 3D glasses
DLP 3D glasses are powered. In order to enhance battery life, they turn off after
a few minutes of inactivity. Before you can view 3D content, you need to ensure
the glasses are turned on. In many cases, there is a power switch on one of the
arms that you can press, and an LED that indicates if the glasses are turned on
or not.
Note: Refer to the documentation that came with your glasses for
instructions how to turn them on and how to change the battery.
Note: Suggest to use Acer DLP 3D glasses to enjoy perfect 3D
performance without compatibility issues.
Note: Require DLP Link 3D glasses and support 96Hz, 100Hz,
120Hz sync signal. Acer projectors need 3D glasses to support
144Hz sync signal for 24P contents. (1080P, 24Hz)
4
English
Using DLP 3D / NVIDIA 3DTV Play
technology
Requires DLP 3D glasses.
Before you can enjoy the benefits of the DLP 3D technology, you will need to
do the following.
1 Ensure your graphics card supports 3D playback.
Note: Please refer to your graphics card’s documentation.
2 Download and install the latest drivers for your graphics card.
Note: Please refer to your graphics card vendor’s website for the
latest driver version.
3 You should also download a suitable 3D player such as the one available
from www.3dtv.at.
To download software and use an NVIDIA 3DTV Play ready projector with
DLP glasses, refer to the NVIDIA 3DTV Play website: www.nvidia.com/3dtv.
Note: You may need to purchase additional software.
4 Ensure you have the correct DLP-compatible 3D glasses.
Setting up a 3D environment
Once you have installed the drivers, you will need to set up the environment.
1 Set the refresh rate to 100/120 Hz on your graphics card for frame/field
sequential 3D formats. Others, please set refresh rate which the 3D content
requires.
If you are viewing Blu-ray 3D content over an HDMI 1.4a or later
connection, this will be set automatically.
2 Press the menu button on the projector remote control to open the OSD.
Select the 3D section (the sixth menu option) on the left-hand side of the
window.
Note: Blu-ray 3D content over an HDMI 1.4a or later connection is
not supported on most of LED projectors.
5
English
3 Set 3D to On.
4 Alternatively, press the 3D Key on your projector’s remote control. From the
3D options, select
On
.
5
2D to 3D
supports most of 2D contents convert to 3D display. And provide
different 3D mode, convergence and depth setting.
6
3D Format
shows while no enough info, please choose suitable one for
correct 3D displaying.
Note:
1. The "3D Format" is only available for HDMI 1.4 or 2nd
generation 3D projectors.
2. The "Frame Packing" is only existed at HDMI 1.4 or later input.
3. "2D to 3D" is only available on some specific models.
4. Design and functions are subject to model’s specifications and
change without notice.
6
English
7 If you find that the 3D content is not displaying properly, try selecting
24P
3D
to compatible with 3D glasses.
8 If you find that the 3D content is not displaying properly, try selecting 3D
L/R Invert from the projector OSD or 3D Key for frame / field sequential 3D
format. Otherwise, try to change the 3D Format to match the 3D signal.
Important: If you have an NVIDIA graphics card and the
NVIDIA 3D
Vision/ 3DTV Play
drivers installed, you may need to disable the
Stereoscopic feature to use the DLP 3D technology, while you are
using non-NVIDIA 3D Players.
Using the stereoscopic player
You need to have a stereoscopic player in order to view 3D content. The
instructions below explain how to view 3D content using the Stereoscopic
player that is available at www.3dtv.at.
Other players may have different procedures, e.g. to download and use the
NVIDIA 3DTV Play software (including a free photo viewer) with DLP glasses,
refer to the NVIDIA 3DTV website: www.nvidia.com/3dtv.
7
English
1 Open the stereoscopic player and set the viewing method by going to View
> Viewing Method > Software pageflipping.
2 Open the 3D content in the player.
Note: You need to view content at fullscreen resolution in order
to get the 3D effects.
Watching 3D DVD or Blu-ray
content
If you have a DVD or Blu-ray player that supports 3D playback, you can watch
3D DVD content using your Acer 3D-enabled projector. Connect your DVD or
Blu-ray player to the projector using any of the available input formats.
To enable and adjust 3D function, follow the procedures in the "Setting up a 3D
environment" section on pages 4-6.
Note: If your DVD or Blu-ray player supports 3D over HDMI 1.4a,
check that 3D options are on and the video uses 24p before
turning on your projector.
Older connections should check the resolution is set to 480i or
576i.