Acer Z271 bmiphz User Manual

Displayed below is the user manual for Z271 bmiphz by Acer which is a product in the Computer Monitors category. This manual has pages.

Related Manuals

Acer XB323UGP Manual

Acer CP514-1W Manual

Acer SF314-59-78ME Manual

Acer K243YBMIX Manual

Acer A3-A10 Manual

Acer GN246HL Bbid Manual

Acer P1510 Manual

Acer WirelessCAST (MWA3) Manual

Acer LCD Monitor

User’s Guide

Acer LCD Monitor User’s Guide

Original Issue: 04/2016

Changes may be made periodically to the information in this publication without obligation to notify

any person of such revisions or changes. Such changes will be incorporated in new editions of this

manual or supplementary documents and publications. This company makes no representations or

warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims

the implied warranties of merchantability or fitness for a particular purpose.

Record the model number, serial number, purchase date and place of purchase information in the

space provided below. The serial number and model number are recorded on the label affixed to

your computer. All correspondence concerning your unit should include the serial number, model

number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any

form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without

the prior written permission of Acer Incorporated.

Acer LCD Monitor User’s Guide

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product

names or trademarks are used herein for identification purposes only and belong to their respective

companies.

iiiPB

Special notes on LCD monitors

The following are normal with the LCD monitor and do not indicate a problem.

• Duetothenatureofthefluorescentlight,thescreenmayflickerduringinitial

use.Turnoffthepowerswitchandthenturnitonagaintomakesuretheflicker

disappears.

• Youmayfindslightlyunevenbrightnessonthescreendependingonthedesktop

patternyouuse.

• TheLCDscreenhas99.99%ormoreeffectivepixels.Itmayincludeblemishesof

0.01%orlesssuchasamissingpixelorapixellitallthetime.

• DuetothenatureoftheLCDscreen,anafterimageofthepreviousscreenmay

remainafterswitchingtheimage,whenthesameimageisdisplayedforhours.In

thiscase,thescreenisrecoveredslowlybychangingtheimageorturningoffthe

powerswitchforafewhours.

Information for your safety and

comfort

Safetyinstructions

Read these instructions carefully. Keep this document for future reference. Follow all

warnings and instructions marked on the product.

Cleaningyourmonitor

Please carefully follow these guidelines when cleaning the monitor:

• Alwaysunplugthemonitorbeforecleaning.

• Useasoftclothtowipethescreenandcabinetfrontandsides.

Connecting/disconnectingthedevice

Observe the following guidelines when connecting and disconnecting power from the

LCD monitor:

• Makesurethemonitorisattachedtoitsbasebeforeconnectingthepowercordto

theACpoweroutlet.

• MakesureboththeLCDmonitorandthecomputerareturnedoffbefore

connectinganycableorunpluggingthepowercord.

• Ifthesystemhasmultiplesourcesofpower,disconnectpowerfromthesystemby

unpluggingallpowercordsfromthepowersupplies.

viv

Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and

located as close to the equipment operator as possible. When you need to disconnect

power from the equipment, be sure to unplug the power cord from the electrical outlet.

Safelistening

To protect your hearing, follow these instructions.

• Graduallyincreasethevolumeuntilyoucanhearitclearlyandcomfortablyand

withoutdistortion.

• Aftersettingthevolumelevel,donotincreaseitafteryourearshaveadjusted.

• Limittheamountoftimelisteningtomusicathighvolume.

• Avoidturningupthevolumetoblockoutnoisysurroundings.

• Turnthevolumedownifyoucan’thearpeoplespeakingnearyou.

Warnings

• Donotusethisproductnearwater.

• Donotplacethisproductonanunstablecart,standortable.Iftheproductfalls,it

couldbeseriouslydamaged.

• Slotsandopeningsareprovidedforventilationtoensurereliableoperationofthe

productandtoprotectitfromoverheating.Theseopeningsmustnotbeblocked

orcovered.Theopeningsshouldneverbeblockedbyplacingtheproductonabed,

sofa,rugorothersimilarsurface.Thisproductshouldneverbeplacednearorover

aradiatororheatregister,orinabuilt-ininstallationunlessproperventilationis

provided.

• Neverpushobjectsofanykindintothisproductthroughcabinetslotsastheymay

touchdangerousvoltagepointsorshort-outpartsthatcouldresultinafireor

electricshock.Neverspillliquidofanykindontoorintotheproduct.

• Toavoiddamageofinternalcomponentsandtopreventbatteryleakage,donot

placetheproductonavibratingsurface.

• Neveruseitundersporting,exercising,oranyvibratingenvironmentwhichwill

probablycauseunexpectedshortcurrentordamageinternaldevices.

Usingelectricalpower

• Thisproductshouldbeoperatedfromthetypeofpowerindicatedonthemarking

label.Ifyouarenotsureofthetypeofpoweravailable,consultyourdealerorlocal

viv

powercompany.

• Donotallowanythingtorestonthepowercord.Donotlocatethisproductwhere

peoplewillwalkonthecord.

• Ifanextensioncordisusedwiththisproduct,makesurethatthetotalampere

ratingoftheequipmentpluggedintotheextensioncorddoesnotexceedthe

extensioncordampererating.Also,makesurethatthetotalratingofallproducts

pluggedintothewalloutletdoesnotexceedthefuserating.

• Donotoverloadapoweroutlet,striporreceptaclebypluggingintoomany

devices.Theoverallsystemloadmustnotexceed80%ofthebranchcircuitrating.

Ifpowerstripsareused,theloadshouldnotexceed80%ofthepowerstrip’sinput

rating.

• Thisproduct’spowercordisequippedwithathree-wiregroundedplug.Theplug

onlyfitsinagroundedpoweroutlet.Makesurethepoweroutletisproperly

groundedbeforeinsertingthepowercordplug.Donotinserttheplugintoanon-

groundedpoweroutlet.Contactyourelectricianfordetails.

Warning! The grounding pin is a safety feature. Using a power

outlet that is not properly grounded may result in electric

shock and/or injury.

Note: Thegroundingpinalsoprovidesgoodprotectionfrom

unexpectednoiseproducedbyothernearbyelectricaldevicesthat

mayinterferewiththeperformanceofthisproduct.

• Usetheproductonlywiththesuppliedpowersupplycordset.Ifyouneedto

replacethepowercordset,makesurethatthenewpowercordmeetsthe

followingrequirements:detachabletype,ULlisted/CSAcertified,typeSPT-2,rated

7A125Vminimum,VDEapprovedoritsequivalent,4.5meters(15feet)maximum

length.

Productservicing

Donotattempttoservicethisproductyourself,asopeningorremovingcoversmay

exposeyoutodangerousvoltagepointsorotherrisks.Referallservicingtoqualified

servicepersonnel.

Unplugthisproductfromthewalloutletandreferservicingtoqualifiedservice

viivi

personnelwhen:

• thepowercordorplugisdamaged,cutorfrayed

• liquidwasspilledintotheproduct

• theproductwasexposedtorainorwater

• theproducthasbeendroppedorthecasehasbeendamaged

• theproductexhibitsadistinctchangeinperformance,indicatinganeedforservice

• theproductdoesnotoperatenormallyafterfollowingtheoperatinginstructions

Potentiallyexplosiveenvironments

Switch off your device in any area with a potentially explosive atmosphere and obey all

signs and instructions. Potentially explosive atmospheres include areas where you would

normally be advised to turn off your vehicle engine. Sparks in such areas could cause

an explosion or fire resulting in bodily injury or even death. Switch off the device near

gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel

depots, storage and distribution areas; chemical plants; or where blasting operations are

in progress. Areas with a potentially explosive atmosphere are often, but not always,

marked. They include below deck on boats, chemical transfer or storage facilities,

vehicles using liquefied petroleum gas (such as propane or butane), and areas where the

air contains chemicals or particles such as grain, dust or metal powders.

Additionalsafetyinformation

Your device and its enhancements may contain small parts. Keep them out of the reach

of small children.

ITEquipmentRecyclingInformation

Acer is strongly committed to environmental protection and views recycling, in the form

of salvaging and disposal of used equipment, as one of the company’s top priorities in

minimizing the burden placed on the environment.

We at Acer are very conscious of the environmental effects of our business and strive to

identify and provide the best working procedures to reduce the environmental impact

of our products.

For more information and help when recycling, please go to this website:

http://www.acer-group.com/public/Sustainability

Note: Adjustonlythosecontrolsthatarecoveredbytheoperating

instructions,sinceimproperadjustmentofothercontrolsmayresult

indamageandwilloftenrequireextensiveworkbyaqualified

techniciantorestoretheproducttonormalcondition.

viivi

Visit www.acer-group.com for further information on the features and benefits of our

other products.

Disposalinstructions

Do not throw this electronic device into the trash when discarding. To minimize

pollution and ensure utmost protection of the global environment, please recycle.

For more information on the Waste from Electrical and Electronics Equipment (WEEE)

regulations, visit http://www.acer-group.com/public/Sustainability

LCDpixelstatement

The LCD unit is produced with high-precision manufacturing techniques. Nevertheless,

some pixels may occasionally misfire or appear as black or red dots. This has no effect on

the recorded image and does not constitute a malfunction.

This product has been shipped enabled for power management:

• Activatedisplay’sSleepmodewithin5minutesofuserinactivity.

• WakethemonitorwhenitisinActiveOffmode,movethemouseorpressany

keyboardkey.

Tipsandinformationforcomfortableuse

Computer users may complain of eyestrain and headaches after prolonged use. Users are

also at risk of physical injury after long hours of working in front of a computer. Long

work periods, bad posture, poor work habits, stress, inadequate working conditions,

personal health and other factors greatly increase the risk of physical injury.

Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis

or other musculoskeletal disorders. The following symptoms may appear in the hands,

wrists, arms, shoulders, neck or back:

• numbness,oraburningortinglingsensation

• aching,sorenessortenderness

ixviii

• pain,swellingorthrobbing

• stiffnessortightness

• coldnessorweakness

If you have these symptoms, or any other recurring or persistent discomfort and/or pain

related to computer use, consult a physician immediately and inform your company’s

health and safety department.

The following section provides tips for more comfortable computer use.

Findingyourcomfortzone

Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest,

or raising your sitting height to achieve maximum comfort. Observe the following tips:

• refrainfromstayingtoolonginonefixedposture

• avoidslouchingforwardand/orleaningbackward

• standupandwalkaroundregularlytoremovethestrainonyourlegmuscles

Takingcareofyourvision

Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room

lighting, poorly focused screens, very small typefaces and low-contrast displays could

stress your eyes. The following sections provide suggestions on how to reduce eyestrain.

Eyes

• Restyoureyesfrequently.

• Giveyoureyesregularbreaksbylookingawayfromthemonitorandfocusingona

distantpoint.

• Blinkfrequentlytokeepyoureyesfromdryingout.

Display

• Keepyourdisplayclean.

• Keepyourheadatahigherlevelthanthetopedgeofthedisplaysoyoureyes

pointdownwardwhenlookingatthemiddleofthedisplay.

• Adjustthedisplaybrightnessand/orcontrasttoacomfortablelevelforenhanced

textreadabilityandgraphicsclarity.

• Eliminateglareandreflectionsby:

• placingyourdisplayinsuchawaythatthesidefacesthewindoworanylight

source

ixviii

• minimizingroomlightbyusingdrapes,shadesorblinds

• usingatasklight

• changingthedisplay’sviewingangle

• usingaglare-reductionfilter

• usingadisplayvisor,suchasapieceofcardboardextendedfromthedisplay’s

topfrontedge

• Avoidadjustingyourdisplaytoanawkwardviewingangle.

• Avoidlookingatbrightlightsources,suchasopenwindows,forextendedperiods

oftime.

Developinggoodworkhabits

Developthefollowingworkhabitstomakeyourcomputerusemorerelaxingand

productive:

• Takeshortbreaksregularlyandoften.

• Performsomestretchingexercises.

• Breathefreshairasoftenaspossible.

• Exerciseregularlyandmaintainahealthybody.

Acer Incorporated

8F, 88, Sec. 1, Xintai 5th Rd., Xizhi

New Taipei City 221, Taiwan

Declaration of Conformity

We,

Acer Incorporated

8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan

And,

Acer Italy s.r.l.

Viale De Gasperi 88/A, 20017 Mazzo di Rho (MI) Italy

Tel: +39-02-939-921 ,Fax: +39-02 9399-2913

www.acer.it

Product: LCD Monitor

Trade Name: ACER

Model Number: VA221Q

SKU Number: VA221Q xxxxxx;

(“x” = 0~9, a ~ z, A ~ Z, or blank)

We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in

conformity with the relevant Union harmonization legislations as below Directive and following harmonized

standards and/or other relevant standards have been applied:

EMC Directive: 2014/30/EU

EN 55022:2010+AC:2011 Class B

EN 61000-3-2:2006+A2:2009 Class D

EN 55024:2010

EN 61000-3-3:2013

LVD Directive: 2014/35/EU

EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013

RoHS Directive: 2011/65/EU

EN 50581:2012

ErP Directive: 2009/125/EC

Regulation (EC) No. 1275/ 2008; EN 50564:2011

Year to begin affixing CE marking: 2016.

_______________________________

29/04/2016

RU Jan / Sr. Manager Date

Acer Incorporated (Taipei, Taiwan)

Federal Communications Commission

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

The following local Manufacturer /Importer is responsible for this declaration:

Product: LCD Monitor

Model Number: VA221Q

SKU Number: VA221Q xxxxxx

(“x” = 0~9, a ~ z, or A ~ Z)

Name of Responsible Party: Acer America

Corporation

Address of Responsible Party:

333 West San Carlos St.

Suite 1500 San Jose, CA

95110 U. S. A.

Contact Person: Acer Representative

Phone No.: 254-298-4000

Fax No.: 254-298-4147

Acer America Corporation

333 West San Carlos St., San Jose

Suite 1500

CA 95110, U. S. A.

Tel : 254-298-4000

Fax : 254-298-4147

www.acer.com

Special notes on LCD monitors iii

Information for your safety and comfort iii

Safety instructions iii

Cleaning your monitor iii

Connecting/disconnecting the device iii

Accessibility iv

Safe listening iv

Warnings iv

Using electrical power iv

Product servicing v

Potentially explosive environments vi

Additional safety information vi

IT Equipment Recycling Information vi

Disposal instructions vii

LCD pixel statement vii

Tips and information for comfortable use vii

Declaration of Conformity

Federal Communications Commission

Declaration of Conformity

Unpacking 1

ATTACHING/ REMOVING THE BASE 2

Screen position adjustment 3

Connecting the Power cord 4

Power saving 4

Display Data Channel (DDC) 4

Connector pin assignment 5

Standard timing table 7

Installation 8

Users controls 9

Using the Shortcut Menu 9

Input Source Selection 10

Acer eColor Management 10

Adjusting the OSD settings 12

Adjusting the OSD position 13

Adjusting the setting 14

Product information 15

Troubleshooting 16

VGA Mode 16

DVI mode 17

HDMI/DP Mode (Optional) 17

English

1PB

Unpacking

Please check that the following items are present when you unpack the box, and save

the packing materials in case you need to ship or transport the monitor in the future.

LCD monitor Quick start guide HDMI cable (Option)

VGA cable DVI cable (Optional) AC Power cord

Audio cable (Optional)

English

ATTACHING/ REMOVING THE BASE

Install: Align the base with the stand and push the base towards the top of

the monitor, and then rotate the base clockwise. Tighten the screw clockwise.

①

②

Remove: Press release bottom and reverse the steps to remove the base.

Warning:

• Actionsbelowarenotallowedwhilemovingandwalking:highadjustment,tilt,

swivel and pivot because of safety requirement.

• Topreventfragilepanelbroken,whenmovinganddisassemblingtheproduct,it

must pull the monitor head to the top at first and place the horizontal direction on

the table.

English

Scre

en positio

n adjustment

Tooptimizetheviewingposition,youcanadjustthemonitortiltbyusing

both of your hands to hold the edges of the monitor as shown below.

Themonitorcanbeadjustedto20degreesupor5degreesdown.

English

Connecting the Power cord

• Check first to make sure that the power cord you use is the correct type required

for your area.

• Themonitorhasauniversalpowersupplythatallowsoperationineither100/120V

ACor220/240VACvoltagearea.Nouser-adjustmentisrequired.

• Plug one end of the power cord to the AC inlet, and plug the other end into an AC

outlet.

• Forunitsusing120VAC:

UseaUL-listedcordset,typeSVTwireandplugrated10A/125V.

• Forunitsusing220/240VAC:

UseacordsetconsistingofH05VV-Fcordandplugrated10A/250V.Thecord

set should have the appropriate safety approvals for the country in which the

equipment will be installed.

Power saving

The monitor will be switched to “power saving” mode by the control signal from the

displaycontroller,asindicatedbytheamber-coloredpowerLED.

Mode LEDlight

On Blue

Power saving Amber

The power saving mode will be kept until a control signal has been detected or the

keyboard or mouse is activated. The recovery time from “power saving” mode back to

“on” is around 3 seconds.

Display Data Channel (DDC)

To make installation easier, so long as your system supports the DDC protocol, the

monitorisabletoplug-and-play.TheDDCisacommunicationprotocolthroughwhich

the monitor automatically informs the host system about its capabilities; for example,

supported resolutions and corresponding timing. The monitor supports the DDC2B

standard.

English

Connector pin assignment

610

11 15

15-pincolordisplaysignalcable

PINNo. Description PINNo. Description

1 Red 9 +5V

2 Green 10 Logic ground

3 Blue 11 Monitor ground

4 Monitor ground 12 DDC-serialdata

5 DDC-return 13 H-sync

6R-ground 14 V-sync

7G-ground 15 DDC-serialclock

8B-ground

English

PB6

24-pincolordisplaysignalcable*

PINNo. Description PINNo. Description

1TMDSdata2- 13 NC

2TMDSdata2+ 14 +5Vpower

3TMDSdata2/4shield 15 GND(returnfor+5Vhsync.vsync)

4NC 16 Hot-plugdetection

5 NC 17 TMDSdata0-

6 DDC clock 18 TMDSdata0+

7 DDC data 19 TMDSdata0/5shield

8NC 20 NC

9TMDSdata1- 21 NC

10 TMDSdata1+ 22 TMDSclockshield

11 TMDSdata1/3shield 23 TMDSclock+

12 NC 24 DDCTMDSclock-

1113151719 97531

26481014 121618

19-pincolordisplaysignalcable

PIN No. Description PIN No. Description

1TMDSData2+ 2TMDSData2Shield

3TMDSData2- 4TMDSData1+

5 TMDSData1Shield 6TMDSData1-

7TMDSData0+ 8TMDSData0Shield

9TMDSData0- 10 TMDSClock+

11 TMDSClockShield 12 TMDSClock-

13 CEC 14 Reserved(N.C.ondevice)

15 SCL 16 SDA

17 DDC/CECGround 18 +5VPower

19 Hot Plug Detect

English

7PB

Standard timing table

1 VGA 640×480 60 Hz

2 MAC 640×480 66.66 Hz

3 VESA 720×400 70 Hz

4 SVGA 800×600 56 Hz

5 SVGA 800×600 60 Hz

6 XGA 1024×768 60 Hz

7 XGA 1024×768 70 Hz

8 VESA 1152×864 75 Hz

9 SXGA 1280×1024 60 Hz

10 VESA 1280×720 60 Hz

11 WXGA 1280×800 60 Hz

12 WXGA+ 1440×900 60 Hz

13 WXGA+ 1680×1050 60 Hz

14 UXGA 1920×1080 60 Hz

English

PB8

Installation

To install the monitor on your host system, please follow the steps below:

Steps

1 Connect the video cable

a Make sure both the monitor and computer are switched off.

b Connect the VGA video cable to the computer.

c Connect DVI Cable (Optional, only Dual-Input Model)to the computer.

d Connect the HDMI Cable (Optional, only HDMI-Input Model)to the computer.

e Connect the audio cable (Optional, only Audio-input Model)to the computer.

2 Connect the power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

3 Turn on the monitor and computer

Turn on the monitor first, then the computer. This sequence is very important.

4 If the monitor does not function properly, please refer to the troubleshooting section

to diagnose the problem.

HDMI HDMI

AUDIO IN

VGA IN

DVI-D IN

HDMI

In order to prevent damage to the monitor, do not lift the monitor by its base.

9PB

Users controls

Power Switch / Power LED:

To turn the monitor ON or OFF.

Lights up to indicate the power is turned ON.

Using the Shortcut Menu

AUTOInput

Press the function button to open the shortcut menu. The shortcut menu lets you

quickly select the most commonly accessed settings.

Icon Item Description

Empowering Press the Empowering Key to open the Acer eColor

Management and access the scenario modes.

AUTO

Auto Press the Auto button to activate the Auto Adjustment

function and the monitor will automatically optimize the

display position, focus, and clock of your display. (For VGA

mode only)

Menu Press the Menu button to activate the OSD menu.

Volume Press the Volume button to adjust volume. (Optional, only

Audio-Input Model)

Input

Input Press the Input button to select from different video

sources that may be connected to your monitor. (Optional,

only Dual-Input Model or HDMI-Input Model) When Auto

Source is off, press the “Input” Hot key to display the input

source Menu. User can switch input source, or to control the

“Auto Source” function.

1110

Input Source Selection

OFF Auto Source On

VGA

DVI

HDMI

Input

Setting

Wide Mode

DDC/CI

ACM

Input

Quick Start Mode

Reset

Full

OFF

Auto Source OFF

OFF

Language

VGA

English

OD Normal

Exit Enter

1. The default of Auto Source is “On”, it can support auto search for signal source in

order.

2. When Auto Source is Off, press the “Input” Hot key to display the input source Menu.

User can switch input source, or to control the “Auto Source” function.

Acer eColor Management

mpowering Technology

MovieGraphicsStandardECOUser

Adjust/Exit

Operation instructions

Step 1: Press “ “ Key to open the Acer eColor Management OSD and access the scenario

modes

Step 2: Press “

“ or “

” to select the mode Features and Benefits

Step 3: Press “ AUTO “ Key to confirm the mode and exit the eColor menu.

1110

Features and benefits

Main Menu

icon

Sub Menu

icon

Sub Menu

item Description

N/A User

mode

User defined. Settings can be fine-tuned to

suit any situation

N/A ECO mode

Adjusts the settings to reduce power

consumption.

N/A Standard

mode

Default Setting. Reflects native display

capability

N/A Grahpic

mode

Enhances colors and emphasize fine detail.

Pictures and photographs appear in vibrant

colors with sharp detail.

N/A Movie

mode

Displays scenes in clearest detail. Presents

gre at vi sua ls , even in unsui tably - lit

environments.

1312

Adjusting the OSD settings

Note: The following content is for general reference only. Actual

product specifications may vary.

Your LCD monitor is equipped with an on-screen display (OSD) menu for making various

adjustments and settings.

Press the Menu button to open the OSD menu. You can use the OSD menu to adjust the picture

quality, OSD timeout, and general settings.

Picture Menu

The Picture menu is used for adjusting the picture quality.

PicturePicture

Acer eColor Management

Brightness

Contrast

6-axis Saturate

Color Temp Blue Light

Auto Config

Blue Light Off

H.Position 20

V.Position 50

Focus 70

Clock 50

6-axis Hue

Exit Enter Exit Enter

1. Press the MENU key to bring up the OSD.

2. Using the

keys, select Picture from the OSD. Then navigate to the picture

element you wish to adjust.

3. Use the

keys to adjust the sliding scales.

4. The following options are available in the Picture menu: Acer ecolor Management,

Blue Light, Brightness, Contrast, H.Position, V.Position, Focus, Clock, Color Temp,

6-axis Saturate, 6-axis Hue and Auto Config.

5. Blue Light: filter out blue light by adjusting different Blue Light showing ratio

-80%, 70%, 60%, 50%.

Note: Higher values allow more blue light through. For the best

protection select a lower value.

1312

6. Brightness: Adjust the brightness from 0 to 100.

Note: Adjusts the balance between light and dark shades.

7 Contrast: Adjust the contrast from 0 to 100.

Note: Sets the degree of difference between light and dark areas.

8. H.Position: adjust the horizontal position of the picture.

9. V.Position: adjust the vertical position of the picture.

10. Focus: adjust clk phase to ADC.

11. Clock: adjust ADC Clock Fast Lock.

12. Color Temp is for user to adjust the colour temperature from blue light, warm, cool

and user. The default value is warm.

13. 6-axis Saturate: Adjust saturation of red, green, blue, yellow, magenta and cyan.

6-axis Hue: Adjust hue for red, green, blue, yellow, magenta and cyan.

14. Auto Config: Press this button to activate the Auto Adjustment function. The Auto

adjustment function is used to set the HPos, VPos, Clock and Focus. (Only available on

VGA port.)

Adjusting the OSD position

Exit

OSD

OSD Timeout 10

Enter

1514

1. Press the MENU key to bring up the OSD.

2. Using the directional keys, select OSD from the on screen display. Then navigate

to the feature you wish to adjust.

3. Press the

button to adjust the OSD Timeout (10 ~ 120 seconds), the default

is10 seconds.

Adjusting the setting

OFF

Setting

Wide Mode

DDC/CI

ACM

Input

Quick Start Mode

Reset

Full

OFF

Auto Source ON

OFF

Language

VGA

English

OD Normal

Exit Enter

1 Press the Menu button to bring up the OSD menu.

2 Press the < / > button to select Setting and press the Menu button to enter the

Setting menu.

The following options are available in the Setting menu: Wide Mode, DDC/CI, OD,

ACM, Input, Language, Auto Source, Quick Start mode, and Reset.

3 Press the < / > button to scroll through the Setting options, and press the Menu

button to enter its sub-menu.

4 Press the < / > button to adjust/select the setting and press the Auto button to

confirm.

5 Wide mode: You can select which screen aspect you are using. The options are Full,

Aspect, and 1:1.

6 DDC/CI: Allows the monitor settings to be set through the software on the PC.

7 OD: Select Off, Normal, or Extreme.

8 ACM: Turn ACM on or off. The default is off.

Note: DDC/CI, short for Display Data Channel/Command Interface,

which allows monitor controls to be sent via software.

1514

9 Input: Select the source from VGA, DVI or HDMI.

10 Language: Set the OSD menu language.

11 Auto Source:The default is “On”, can support auto search for signal source in order.

12 Quick start mode: Select Off or On. The default is “Off”. Turn on to speed up boot

speed.

Product information

Exit

Information

S/N:ETL5309 1326350380B3742

1920x1080

H:65KHz V:60Hz

VGA Input

1. Press the MENU key to bring up the OSD.

2. Using the / keys, select Information from the OSD. Then the basic information

of LCD monitor will show up for current input.

English

1716

Troubleshooting

Before sending your LCD monitor for servicing, please check the troubleshooting list

below to see if you can self-diagnose the problem.

VGA Mode

Problem LED status Remedy

No picture visible Blue Using the OSD menu, adjust brightness

and contrast to maximum or reset to their

default settings.

Off Check the power switch.

Check if the power cord is properly

connected to the monitor.

Amber Check if the video signal cable is properly

connected at the back of monitor.

Check if the computer system is switched

on and in power saving/standby mode.

Unstable picture Blue Check if the specification of graphics

adapter and monitor is in compliance

which may be causing the input signal

frequency mismatch.

Abnormal picture Image is missing,

off-center, too

large or too small

on the screen.

Using the OSD menu, adjust focus, clock,

H-position and V-position with non-

standard signals.

Check the display setting on your system.

In case of a missing image, please select

another resolution or vertical refresh rate.

Wait for a few seconds after adjusting

the size of the image before changing

or disconnecting the signal cable or

switching off the monitor.

English

1716

DVI mode

Problem LED status Remedy

No picture visible Blue Using the OSD menu, adjust brightness and

contrast to maximum or reset to their default

settings.

Off Check the power switch.

Check if the AC power cord is properly

connected to the monitor.

Amber Check if the video signal cable is properly

connected at the back of monitor.

Check if the computer system is switched on

and in power saving/standby mode.

HDMI/DP Mode (Optional)

Problem LED status Remedy

No picture visible Blue Using the OSD, adjust brightness and contrast

to maximum or reset to their default settings.

Off Check the power switch.

Check if the AC power cord is properly

connected to the monitor.

Amber Check if the video signal cable is properly

connected at the back of monitor.

Check that the computer system is switched

on and in power saving/ standby mode.