Notices
Chapter 1: Product introduction
Chapter 2: Hardware information
Chapter 3: BIOS setup
Chapter 4: Software support
Chapter 5: Multiple GPU technology support
- 5.1 ATI® CrossFireX™ technology
- 5.2 NVIDIA® SLI™ technology

ASUS Crosshair V Formula-Z User Manual

Displayed below is the user manual for Crosshair V Formula-Z by ASUS which is a product in the Motherboards category. This manual has pages.

Related Manuals

ASUS ROG CROSSHAIR VI HERO (WI-FI AC) Manual

ASUS ROG CROSSHAIR VI EXTREME Manual

ASUS ROG Crosshair VIII Hero (WI-FI) Manual

ASUS ROG Crosshair VIII Hero Manual

ASUS ROG Crosshair VIII Impact Manual

ASUS Crosshair VIII Hero Manual

ASUS ROG Crosshair VIII Formula Manual

Motherboard

Crosshair V

Formula Series

E6693

Second Edition

July 2011

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Notices ........................................................................................................ vii

FCC Radio Frequency (RF) Exposure Caution Statement .............. vii

Declaration of Conformity (R&TTE directive 1999/5/EC) ................ viii

CE Marking ..................................................................................... viii

Wireless Operation Channel for Different Domains ..........................ix

France Restricted Wireless Frequency Bands ..................................ix

IC Radiation Exposure Statement for Canada ...................................x

Safety information ...................................................................................... xi

About this guide ....................................................................................... xiii

Crosshair V Formula specications summary ....................................... xv

ROG ThunderBolt specications summary ......................................... xviii

Chapter 1: Product introduction

1.1 Welcome! ...................................................................................... 1-1

1.2 Package contents ......................................................................... 1-1

1.3 Special features ............................................................................ 1-2

1.3.1 Product highlights ........................................................... 1-2

1.3.2 ROG ThunderBolt LAN/Audio Combo ........................... 1-3

1.3.3 ROG Intelligent Performance & Overclocking features ... 1-4

1.3.4 ASUS special features .................................................... 1-7

Chapter 2: Hardware information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard overview ................................................................. 2-2

2.2.1 Motherboard layout ......................................................... 2-2

2.2.2 Layout contents ............................................................... 2-3

2.2.3 Central Processing Unit (CPU) ....................................... 2-4

2.2.4 System memory .............................................................. 2-5

2.2.5 Expansion slots ............................................................. 2-12

2.2.6 Onboard LEDs .............................................................. 2-15

2.2.7 Jumpers ........................................................................ 2-19

2.2.8 Internal connectors ....................................................... 2-20

2.2.9 Onboard switches ......................................................... 2-29

2.2.10 ProbeIt .......................................................................... 2-32

2.3 Building your computer system ............................................... 2-33

2.3.1 Additional tools and components to build a PC system 2-33

Contents

2.3.2 CPU installation ............................................................ 2-34

2.3.3 CPU heatsink and fan assembly installation ................. 2-35

2.3.4 DIMM installation .......................................................... 2-38

2.3.5 Motherboard installation ................................................ 2-39

2.3.6 ATX Power connection .................................................. 2-41

2.3.7 SATA device connection ................................................ 2-42

2.3.8 Front I/O Connector ...................................................... 2-43

2.3.9 Expension Card installation .......................................... 2-44

2.3.10 ROG ThunderBolt Installation ....................................... 2-45

2.3.11 Rear panel connectors .................................................. 2-47

2.3.12 Audio I/O connections ................................................... 2-48

2.4 Starting up for the rst time ...................................................... 2-51

2.5 Turning off the computer ........................................................... 2-52

2.5.1 Using the OS shut down function .................................. 2-52

2.5.2 Using the dual function power switch ............................ 2-52

Chapter 3: BIOS setup

3.1 Knowing BIOS .............................................................................. 3-1

3.2 BIOS setup program .................................................................... 3-1

3.2.1 EZ Mode ......................................................................... 3-2

3.2.2 Advanced Mode .............................................................. 3-3

3.3 Extreme Tweaker menu ............................................................... 3-5

3.4 Main menu .................................................................................. 3-12

3.4.1 System Language [English] .......................................... 3-12

3.4.2 System Date [Day xx/xx/xxxx] ....................................... 3-12

3.4.3 System Time [xx:xx:xx] ................................................. 3-12

3.4.4 Security ......................................................................... 3-13

3.5 Advanced menu ......................................................................... 3-15

3.5.1 CPU Conguration ........................................................ 3-16

3.5.2 North Bridge Conguration ........................................... 3-17

3.5.3 SATA Conguration ....................................................... 3-18

3.5.4 USB Conguration ........................................................ 3-20

3.5.5 CPU Core On/ Off Function .......................................... 3-22

3.5.6 Onboard Devices Conguration .................................... 3-23

3.5.7 APM .............................................................................. 3-25

3.5.8 iROG Conguration ....................................................... 3-26

Contents

3.5.9 ROG Connect ............................................................... 3-26

3.5.10 LED Control .................................................................. 3-27

3.6 Monitor menu ............................................................................. 3-29

3.7 Boot menu .................................................................................. 3-33

3.8 Tools menu ................................................................................. 3-35

3.8.1 ASUS EZ Flash 2 Utility ................................................ 3-35

3.8.2 ASUS SPD Information ................................................. 3-35

3.8.3 ASUS O.C. Prole ......................................................... 3-36

3.8.4 GO Button File .............................................................. 3-37

3.9 Exit menu .................................................................................... 3-38

3.10 Updating BIOS ............................................................................ 3-39

3.10.1 ASUS Update utility ...................................................... 3-40

3.10.2 ASUS EZ Flash 2 Utility ................................................ 3-43

3.10.3 ASUS BIOS Updater ..................................................... 3-45

Chapter 4: Software support

4.1 Installing an operating system ................................................... 4-1

4.2 Support DVD information ............................................................ 4-1

4.2.1 Running the support DVD ............................................... 4-1

4.2.2 Drivers menu ................................................................... 4-2

4.2.3 Utilities menu .................................................................. 4-3

4.2.4 Make disk menu .............................................................. 4-4

4.2.5 Manual menu .................................................................. 4-4

4.2.6 Video menu ..................................................................... 4-5

4.2.7 ASUS Contact information .............................................. 4-5

4.2.8 Other information ............................................................ 4-6

4.3 Software information ................................................................... 4-8

4.3.1 ASUS AI Suite II .............................................................. 4-8

4.3.2 Tool ................................................................................. 4-9

4.3.3 DIGI+ VRM .................................................................... 4-14

4.3.4 EPU ............................................................................... 4-18

4.3.5 FAN Xpert ..................................................................... 4-19

4.3.6 Probe II ......................................................................... 4-20

4.3.7 Sensor Recorder ........................................................... 4-22

4.3.8 ROG Connect ............................................................... 4-25

4.3.9 ROG ThunderBolt LAN ................................................. 4-28

4.3.10 ThunderBolt Audio ........................................................ 4-31

4.3.11 Sound Blaster X-Fi MB 2 ............................................. 4-35

4.4 RAID congurations .................................................................. 4-38

4.4.1 RAID denitions ............................................................ 4-38

4.4.2 Installing Serial ATA hard disks ..................................... 4-39

4.4.3 Setting the RAID item in BIOS ...................................... 4-39

4.4.4 AMD® Option ROM Utility .............................................. 4-40

4.5 Creating a RAID driver disk ....................................................... 4-43

4.5.1 Creating a RAID driver disk without entering the OS .... 4-43

4.5.2 Creating a RAID driver disk in Windows®...................... 4-43

4.5.3 Installing the RAID driver during Windows®

OS installation ............................................................... 4-44

4.5.4 Using a USB oppy disk drive ....................................... 4-45

Chapter 5: Multiple GPU technology support

5.1 ATI® CrossFireX™ technology .................................................... 5-1

5.1.1 Requirements .................................................................. 5-1

5.1.2 Before you begin ............................................................. 5-1

5.1.3 Installing CrossFireX graphics cards .............................. 5-2

5.1.4 Installing the device drivers ............................................. 5-3

5.1.5 Enabling the ATI® CrossFireX™ technology ................... 5-3

5.2 NVIDIA® SLI™ technology ........................................................... 5-5

5.2.1 Requirements .................................................................. 5-5

5.2.2 Installing two SLI-ready graphics cards .......................... 5-5

5.2.3 Installing the device drivers ............................................. 5-6

5.2.4 Enabling the NVIDIA® SLI™ technology ......................... 5-6

Contents

vii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with manufacturer’s

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modications

to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

FCC Radio Frequency (RF) Exposure Caution Statement

Any changes or modications not expressly approved by the party responsible

for compliance could void the user’s authority to operate this equipment. “The

manufacture declares that this device is limited to Channels 1 through 11 in the

2.4GHz frequency by specied rmware controlled in the USA.”

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. To maintain compliance with FCC RF exposure

compliance requirements, please avoid direct contact to the transmitting antenna

during transmitting. End users must follow the specic operating instructions for

satisfying RF exposure compliance.

viii

RF exposure warning

This equipment must be installed and operated in accordance with provided

instructions and the antenna(s) used for this transmitter must be installed to

provide a separation distance of at least 20 cm from all persons and must not

be co-located or operating in conjunction with any other antenna or transmitter.

End-users and installers must be provide with antenna installation instructions and

transmitter operating conditions for satisfying RF exposure compliance.

Declaration of Conformity (R&TTE directive 1999/5/EC)

The following items were completed and are considered relevant and sufcient:

• Essential requirements as in [Article 3]

• Protection requirements for health and safety as in [Article 3.1a]

• Testing for electric safety according to [EN 60950]

• Protection requirements for electromagnetic compatibility in [Article 3.1b]

• Testing for electromagnetic compatibility in [EN 301 489-1] & [EN 301 489-17]

• Effective use of the radio spectrum as in [Article 3.2]

• Radio test suites according to [EN 300 328-2]

CE Marking

CE marking for devices without wireless LAN/Bluetooth

The shipped version of this device complies with the requirements of the EEC

directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low

voltage directive”.

CE marking for devices with wireless LAN/ Bluetooth

This equipment complies with the requirements of Directive 1999/5/EC of the

European Parliament and Commission from 9 March, 1999 governing Radio and

Telecommunications Equipment and mutual recognition of conformity.

Wireless Operation Channel for Different Domains

N. America 2.412-2.462 GHz Ch01 through CH11

Japan 2.412-2.484 GHz Ch01 through Ch14

Europe ETSI 2.412-2.472 GHz Ch01 through Ch13

France Restricted Wireless Frequency Bands

Some areas of France have a restricted frequency band. The worst case maximum

authorized power indoors are:

• 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)

• 100mW for frequencies between 2446.5 MHz and 2483.5 MHz

Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5

MHz.

There are few possibilities for outdoor use: On private property or on the private

property of public persons, use is subject to a preliminary authorization procedure

by the Ministry of Defense, with maximum authorized power of 100mW in the

2446.5–2483.5 MHz band. Use outdoors on public property is not permitted.

In the departments listed below, for the entire 2.4 GHz band:

• Maximum authorized power indoors is 100mW

• Maximum authorized power outdoors is 10mW

Departments in which the use of the 2400–2483.5 MHz band is permitted with an

EIRP of less than 100mW indoors and less than 10mW outdoors:

01 Ain 02 Aisne 03 Allier 05 Hautes Alpes

08 Ardennes 09 Ariège 11 Aude 12 Aveyron

16 Charente 24 Dordogne 25 Doubs 26 Drôme

32 Gers 36 Indre 37 Indre et Loire 41 Loir et Cher

45 Loiret 50 Manche 55 Meuse 58 Nièvre

59 Nord 60 Oise 61 Orne 63 Puy du Dôme

64 Pyrénées Atlantique 66 Pyrénées Orientales

67 Bas Rhin 68 Haut Rhin 70 Haute Saône 71 Saône et Loire

75 Paris 82 Tarn et Garonne 84 Vaucluse

88 Vosges 89 Yonne 90 Territoire de Belfort

94 Val de Marne

This requirement is likely to change over time, allowing you to use your wireless

LAN card in more areas within France. Please check with ART for the latest

information (www.art-telecom.fr)

Your WLAN Card transmits less than 100mW, but more than 10mW.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

IC Radiation Exposure Statement for Canada

This equipment complies with IC radiation exposure limits set forth for an

uncontrolled environment. To maintain compliance with IC RF exposure

compliance requirements, please avoid direct contact to the transmitting antenna

during transmitting. End users must follow the specic operating instructions for

satisfying RF exposure compliance.

Operation is subject to the following two conditions:

• This device may not cause interference and

• This device must accept any interference, including interference that may

cause undesired operation of the device.

To prevent radio interference to the licensed service (i.e. co-channel Mobile

Satellite systems) this device is intended to be operated indoors and away from

windows to provide maximum shielding. Equipment (or its transmit antenna) that is

installed outdoors is subject to licensing.

The user is cautioned that this device should be used only as specied within

this manual to meet RF exposure requirements. Use of this device in a manner

inconsistent with this manual could lead to excessive RF exposure conditions.

This device and its antenna(s) must not be co-located or operating in conjunction

with any other antenna or transmitter.

Country Code selection feature to be disabled for products marketed to the US/

CANADA.

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

• When adding or removing devices to or from the system, ensure that the power

cables for the devices are unplugged before the signal cables are connected. If

possible, disconnect all power cables from the existing system before you add

a device.

• Before connecting or removing signal cables from the motherboard, ensure

that all power cables are unplugged.

• Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

• Ensure that your power supply is set to the correct voltage in your area. If you

are not sure about the voltage of the electrical outlet you are using, contact

your local power company.

• If the power supply is broken, do not try to x it by yourself. Contact a qualied

service technician or your retailer.

• The optical S/PDIF is an optional component (may or may not be included in

your motherboard) and is dened as a CLASS 1 LASER PRODUCT.

INVISIBLE LASER RADIATION, AVOID EXPOSURE TO BEAM.

• Never dispose of the battery in re. It could explode and release harmful

substances into the environment.

• Never dispose of the battery with your regular household waste. Take it to a

hazardous material collection point.

• Never replace the battery with an incorrect battery type.

• RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT

TYPE.

• DISPOSE OF USED BATTERIES ACCORDING TO THE ABOVE

BATTERY-RELATED INSTRUCTIONS.

xii

Operation safety

• Before installing the motherboard and adding devices on it, carefully read all

the manuals that came with the package.

• Before using the product, ensure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in

any area where it may become wet.

This motherboard should only be used in environments with ambient

temperatures between 5ºC (41ºF) and 40ºC (104ºF).

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualied

service technician or your retailer.

DO NOT throw the motherboard in municipal waste. This product has been

designed to enable proper reuse of parts and recycling. This symbol of the

crossed out wheeled bin indicates that the product (electrical and electronic

equipment) should not be placed in municipal waste. Check local regulations for

disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste.

This symbol of the crossed out wheeled bin indicates that the battery should not

be placed in municipal waste.

xiii

Where to nd more information

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and

software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty

yers, that may have been added by your dealer. These documents are not

part of the standard package.

About this guide

This user guide contains the information you need when installing and conguring

the motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technology it supports.

• Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to perform

when installing system components. It includes description of the switches,

jumpers, and connectors on the motherboard.

• Chapter 3: BIOS setup

This chapter tells how to change system settings through the BIOS Setup

menus. Detailed descriptions of the BIOS parameters are also provided.

• Chapter 4: Software support

This chapter describes the contents of the support DVD that comes with the

motherboard package and the software.

• Chapter 5: Multiple GPU technology support

This chapter describes how to install and congure multiple ATI®

CrossFireX™ and NVIDIA® SLI™ graphics cards.

xiv

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT: Instructions that you MUST follow to complete a

task.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following

symbols used throughout this manual.

Typography

Bold text Indicates a menu or an item to select.

Italics Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign

means that you must press the enclosed key.

Example: <Enter> means that you must press the Enter

or Return key.

<Key1+Key2+Key3> If you must press two or more keys simultaneously, the

key names are linked with a plus sign (+).

Example: <Ctrl+Alt+D>

Command Means that you must type the command exactly as

shown, then supply the required item or value enclosed

in brackets.

Example: At the DOS prompt, type the command line:

afudos /iC5F.ROM

Crosshair V Formula specications summary

CPU AMD socket for AM3+ FX™/Phenom™ II/Athlon™ II/

Sempron™ 100 Series Processors

Supports 32nm CPU, up to 8 cores

AMD Cool 'n' Quiet™ Technology

AMD 140W CPU Support

Chipset AMD® 990FX / SB950

System Bus Up to 5200 MT/s HyperTransport™ 3.0

Memory Dual channel memory architecture

4 x DIMM, max. 32GB, DDR3 2133(O.C.)/2000(O.

C.)/1800(O.C.)/1600/1333/1066 MHz, ECC and non-

ECC, un-buffered memory

*Refer to www.asus.com or user manual for the Memory

QVL (Qualied Vendors Lists)

**Due to OS limitation, when installing total memory

of 4GB capacity or more, Windowsof 4GB capacity or more, Windows® 32-bit operation

system may only recognize less than 3GB. Hence, asystem may only recognize less than 3GB. Hence, a

total installed memory of less than 3GB istotal installed memory of less than 3GB is

recommended.recommended.

Expansion Slots 3 x PCIe 2.0 x16 slots (dual @ x16; x16 x8 x8)

1 x PCIe 2.0 x16 (x4 speed)

1 x PCIe 2.0 x1

1 x PCI 2.2

Multi-GPU Technology Supports 3-Way NVIDIA® SLI™ / AMD CrossFireX™

Technology

Storage SB950 South Bridge:

- 6 x SATA 6Gb/s ports with RAID 0, 1, 5, 10, red

ASMedia® controllers:

- 1 x SATA 6Gb/s port, red

- 1 x eSATA 6Gb/s port, red

LAN Intel® Ethernet Gigabit LAN

High Denition Audio SupremeFX X-Fi 2 built-in 8-channel High Denition

Audio CODEC

- EAX® Advanced™ HD 5.0

- THX® TruStudio PRO™

- X-Fi® Xtreme Fidelity™

- Creative® ALchemy

- Supports Blu-ray audio layer content protection

- Supports 1 Optical S/PDIF out port at back I/O

- Supports Jack-sensing, Multi-streaming, Front

Panel Jack-Retasking

(continued on the next page)

xvi

USB ASMedia® USB 3.0 controller

- 6 x USB 3.0/2.0 ports (4 at back I/O ; 2 at mid-

board)

AMD® SB950 chipset

- 12 x USB 2.0/1.1 ports (8 ports at back I/O,

black+white, 4 ports at mid-board)

ROG Exclusive

Overclocking Features

ROG Connect

- RC Poster

- RC Remote

- RC Diagram

- GPU TweakIt

GPU.DIMM Post

BIOS Print

GameFirst

Extreme Tweaker

ROG Extreme Engine Digi+

- 8+2 phase CPU power design

CPU Level Up

MemOK!

Intelligent overclocking tools:

- ASUS TPU

- O.C. Prole

Overclocking Protection:

- COP EX (Component Overheat Protection - EX)

- Voltiminder LED

- ASUS C.P.R.(CPU Parameter Recall)

Other Special Features Core Unlocker

ASUS Fan Xpert

ASUS Q-Connector

ASUS Q-Shield

ASUS Q- LED (CPU, DRAM, VGA, Boot Device LEDs)

Ai Charger+

ASUS EZ Flash 2

ASUS MyLogo 3

BIOS Features 32Mb Flash ROM, UEFI BIOS, PnP, DMI2.0, WfM2.0, SM

BIOS 2.5, ACPI2.0a Multi-Language BIOS

Manageability WOL by PME, WOR by PME, PXE

Back Panel I/O Ports 1 x PS/2 Keyboard/Mouse Combo port

1 x External SATA port

1 x LAN (RJ45) port

4 x USB 3.0/2.0 ports

8 x USB 2.0/1.1 ports (1 port can be switched to ROG

Connect)

1 x S/PDIF Out (Optical)

8-channel Audio I/O

1 x Clr CMOS switch

(continued on the next page)

Crosshair V Formula specications summary

xvii

Internal I/O Connectors 1 x USB 3.0/2.0 connector supports additional 2 USB

3.0/2.0 ports

2 x USB 2.0/1.1 connectors support additional 4 USB

2.0/1.1 ports

7 x SATA 6Gb/s connectors (Red)

8 x Fan connectors: 2 x CPU / 3 x Chassis / 3x Optional

8 x ProbeIt measurement points

3 x Thermal sensor connectors

1 x SPDIF_out connector

1 x 24-pin ATX power connector

1 x 8-pin ATX 12V power connector

1 x 4-pin ATX 12V power connector

1 x EZ Plug connector (4-pin Molex Power connector)

1 x En/Dis-able Clr CMOS header

1 x CPU Level Up button

1 x ROG Connect switch

1 x START (Power on) button

1 x RESET button

1 x Go button

1 x Audio front panel (AAFP) header

1 x System panel connector

Software Drivers

Sound Blaster® X-Fi 2 Utility

Kaspersky® Anti-Virus

DAEMON Tools Pro Standard

ROG CPU-Z

ASUS Utilities

Form Factor ATX Form Factor, 12”x 9.6” (30.5cm x 24.4cm)

*Specications are subject to change without notice.

Crosshair V Formula specications summary

xviii

ThunderBolt LAN/

Audio Combo Card

Dedicated Network Processing Unit (NPU)

- Advanced Game Detect™

- Visual Bandwidth Control™

- Application Blocking

- Online Gaming PC Monitor™

- Bandwidth Tester

- Game Networking DNA™

Built-in 2-Channel High Quality DAC/ADC

- Output Signal-to-Noise Ratio (A-Weighted): 116dB

- Output THD+N at 1KHz: 105dB

- C-Media 6631 audio processor (Max. 192KHz/24-bit)

- TI 6120A2 high delity headphone amplier

- Digital-to-Analog Converter: 120dB (Max. 192kHz/ 24-bit)

- Analog-to-Digital Converter: 114dB (Max. 192KHz/24-bit)

- Supports 3 Headphone Impedance Gain Modes (up to 300

ohms)

- Fine-tuned Game Genre EQ Proles

- Xear™ Surround Headphone

- Xear™ SingFX

- Equalizer, Environment Effects, FlexBass, Smart Volume,

Virtual Speaker Shifter

- DS3D GX 1.0 OpenAL

- Front-panel audio connector (AAFP)

- Line-in, Line out, Optical S/PDIF out ports

- USB 2.0 Interface

ROG ThunderBolt specications summary

*ROG ThunderBolt is only available on selected models.

Chapter 1: Product

introduction

This chapter describes the motherboard

features and the new technologies

it supports.

ROG Crosshair V Formula

Chapter summary 1

1.1 Welcome! ...................................................................................... 1-1

1.2 Package contents ......................................................................... 1-1

1.3 Special features ............................................................................ 1-2

ROG Crosshair V Formula 1-1

1.1 Welcome!

Thank you for buying an ROG Crosshair V Formula motherboard!

The motherboard delivers a host of new features and latest technologies, making it

another standout in the long line of ASUS quality motherboards!

Before you start installing the motherboard, and hardware devices on it, check the

items in your package with the list below.

1.2 Package contents

Check your motherboard package for the following items.

Motherboard ROG Crosshair V Formula

Card *ROG ThunderBolt

Cables 1 x ROG Connect cable

1 x CrossFire Cable

1 x SLI Cable

3 x 2-in-1 SATA 6G cables

*1 x USB to USB cable for ThunderBolt

Accessories 1 x 2-in-1 ASUS Q-Connector Kit

1 x 3-Way SLI Bridge

1 x Cable Ties Pack

1 x ROG Theme Label

1 x 12-in-1 ROG SATA Cable Label

1 x I/O Shield

Application DVD ROG motherboard support DVD

Documentation User guide

*ROG ThunderBolt Audio Precision Test Report

If any of the above items is damaged or missing, contact your retailer.

*The ThunderBolt is only available on selected models.

1-2 Chapter 1: Product Introduction

1.3 Special features

1.3.1 Product highlights

Republic of Gamers

The Republic of Gamers consists only the best of the best. We offer the best

hardware engineering, the fastest performance, the most innovating ideas, and we

welcome the best gamers to join in. In the Republic of Gamers, mercy rules are

only for the weak, and bragging rights means everything. We believe in making

statements and we excel in competitions. If your character matches our trait, then

join the elite club, make your presence felt, in the Republic of Gamers.

FX™/Phenom™ II/Athlon™ II/ Sempron™ 100 Series Processors

(AM3+ CPU)

This motherboard supports latest AMD® Socket AM3+ multi-core processors

with up to 8-core native CPU cores and delivers better overclocking capabilities

with less power consumption. It features AMD Turbo CORE Technology 2.0 and

accelerates data transfer rate up to 5200MT/s via HyperTransport™ 3.0 based

system bus. This motherboard also supports AMD® CPUs in the new 32nm

manufacturing process.

AMD 990FX Chipset

AMD 990FX Chipset is designed to support up to 5.2GT/s HyperTransport™

3.0 (HT 3.0) interface speed and dual PCI Express™ 2.0 x16 graphics. It is

optimized with AMD latest AM3+ and multi-core CPUs to provide excellent system

performance and overclocking capabilities.

DDR3 2133(O.C.) Support

This motherboard supports DDR3 2133(O.C.) that provides faster data transfer

rate and more bandwith to increase memory computing efciency, enhancing

system performance in 3D graphics and other memory demanding applications.

Refer to www.asus.com for the supported CPU models.

ROG Crosshair V Formula 1-3

SLI/CrossFireX On-Demand

Why choose when you can have both?

SLI or CrossFireX? Fret no longer because with the ROG Crosshair V Formula,

you'll be able to run both multi-GPU setups. The board features SLI/CrossFireX

on Demand technology, supporting SLI or CrossFireX conguration. Whichever

path you take, you can be assured of jaw-dropping graphics at a level previously

unseen.

PCIe 2.0

Double Speed; Double Bandwidth

This motherboard supports the latest PCIe 2.0 devices for double speed and

bandwidth which enhances system performance.

1.3.2 ROG ThunderBolt LAN/Audio Combo

Built-in Headphone Amp.

Sound GREATER

The ROG ThunderBolt is a dedicated LAN/audio combo card designed for gamers.

With the ROG ThunderBolt's high sound quality and built-in amp, gamers can

discover the enemy's position much easier and react earlier, making it just like

another weapon in a gamer's arsenal! With ne-tuned background sound effects

for popular game types and Xear 3D Surround tech, ROG ThunderBolt lets you

hear better and win easier!

Dedicated NPU

Play FASTER

Even with a high-end CPU and GPU, FPS and MMORPGs can still become

a laggy mess if the LAN performance sucks. Gamers yearn to keep gaming

framerates solid. The ROG ThunderBolt has been designed from continual

feedback from the PC gaming community. By enhancing the 2 key factors (Speed

and Sound) that dominate your gaming experience, the advanced integration of the

LAN/Audio combo ThunderBolt offers higher throughput and decreased latency is

about to bring the best in-game experience to you!

Note: Network Processing Unit (NPU)

ROG ThunderBolt is only available on selected models.

1-4 Chapter 1: Product Introduction

1.3.3 ROG Intelligent Performance & Overclocking features

Extreme Engine Digi+

Powerful combination of analog and digital design elements

Extreme Engine Digi+ equipped with high performance digital VRM design can

easily achieve the ultimate performance with adjustable CPU PWM frequency. It

expedites heat dissipation and achieves better electric conduction keeping critical

components reliable. Now you'll be able to push your spanking new CPU to the

limit, hitting benchmark scores that others only dream of. Extreme Engine Digi+

balances the need for voltage and the desire for rock solid performance to bring

the ultimate user experience.

ROG Connect

Plug and Overclock - Tweak it the hardcore way!

Monitor the status of your desktop PC and tweak its parameters in real-time via a

notebook—just like a race car engineer—with ROG Connect. ROG Connect links

your main system to a notebook through a USB cable, allowing you to view real-

time POST code and hardware status readouts on your notebook, as well as make

on-the-y parameter adjustments at a purely hardware level. Diagram, power, reset

button, ash BIOS through notebook. Refer to page 2-29 for details.

GameFirst

The speed you need to pwn

Low Internet latency allows you to frag more, and get fragged less. That's why

ROG has introduced GameFirst, a feature that manages the ow of trafc

according to your needs so that you can still listen to online music, download and

upload les, and engage in Internet chats without sacricing the low ping times you

need to pwn your opponents.

iROG

Intelligent multiple control at hand

The iROG is a special IC which enables several ROG highlighted functions that

gives users full disposal of the motherboard at any stage! This design allows

advanced user control and management to be processed purely at a hardware

level. iROG greatly increases fun during overclocking for PC enthusiasts and it

offers system maintenance and management with more control and efciency.

ROG Crosshair V Formula 1-5

CPU Level Up

A simple click for instant upgrade!

Ever wish that you could have a more expansive CPU? Upgrade your CPU at no

additional cost with ROG's CPU Level Up! Simply pick the processor you wanted

to OC to, and the motherboard will do the rest! See the new CPU speed and enjoy

that performance instantly. Overclocking is never as easy as this.

GPU.DIMM Post

Easily check the status of your graphics cards and memory in the BIOS!

Notice potential problems even before you enter the OS! Overclockers can save

valuable minutes in detecting component failure under extreme conditions. With

GPU.DIMM Post, quickly and easily check your graphics cards and memory

DIMMs status in the BIOS, potentially keeping that record-breaking overclock!

BIOS Print

One click, easily share your BIOS settings

ROG offers a whole new UEFI BIOS feature to handle the demands of an

overclocking experience. Crosshair V Formula features ROG BIOS Print which

allows users to easily share their BIOS settings to others with the press of a button.

The days of using a camera to take BIOS screenshot are over.

ProbeIt

Get all hands-on with hardware-based overclocking

ProbeIt takes the guesswork out of locating the motherboard’s measurement

points, identifying them clearly in the form of 8 sets of detection points so you’ll

know exactly where to get quick yet accurate readings using a multitester.

MemOK!

Any memory is A-OK!

Memory compatibility is among the top concerns when it comes to computer

upgrades. Worry no more, MemOK! is the fastest memory booting solution today.

This remarkable memory rescue tool requires nothing but a push of a button

to patch memory issues and get your system up and running in no time. The

technology is able to determine failsafe settings that can dramatically improve

system booting success.

1-6 Chapter 1: Product Introduction

Extreme Tweaker

One stop performance tuning shop

Extreme Tweakers is the one stop shop to ne-tune your system to optimal

performance. No matter if you're looking for frequency adjustment, over-voltage

options, or memory timing settings, they're all here!

Voltiminder LED

Friendly reminder on Voltage Settings

In the pursuit of extreme performance, overvoltage adjustment is critical but

risky. Acting as the "red zone" of a tachometer, the Voltiminder LED displays the

voltage status for CPU, PCH, and Memory in a intuitive color-coded fashion. The

voltiminder LED allows quick voltage monitoring for overclockers.

COP EX

Maximum OC with condence with burn proof protection to chipsets and

GPU!

The COP EX allows overclockers to increase chipset voltage without the worries

of overheating. It can also be used to monitor and save an overheating GPU.

The COP EX allows more freedom and less constraint for maximum performance

achievement.

Loadline Calibration

Optimal power boost for extreme CPU overclocking!

Maintaining ample voltage support for the CPU is critical during overclocking.

The Loadline Calibration ensures stable and optimal CPU voltage under heavy

loading. It helps overclockers enjoy the motherboard's ultimate OC capabilities and

benchmark scores.

Onboard Switches

No more shorting pins or moving jumpers

With an easy press during overclock, this exclusive onboard switch allows gamer

to effortlessly ne-tune the performance without having to short the pins or moving

jumpers!

ROG Crosshair V Formula 1-7

SupremeFX X-Fi 2 Built-in

Play with ultra-real cinematic in-game surround sound!

SupremeFX X-Fi 2 delivers incredible gaming audio experiences to ROG die

hards. It features EAX 5.0 and OpenAL for ultra-real cinematic in-game audio.

It even comes with THX TruStudio Pro, which makes games, music and movies

sound way better! SupremeFX X-Fi 2 also implements gold-plated jacks and high

quality capacitors to ensure high denition adventures in audio.

1.3.4 ASUS special features

ASUS TPU

The Ultimate O.C. Processor

Unleash your performance with ASUS’ simple onboard switch or AI Suite II utility.

The TPU chip offers precise voltage control and advanced monitoring through Auto

Tuning and TurboV functions. Auto Tuning offers a user friendly way to automtically

optimize the system for fast, yet stable clock speeds, while TurboV enables

unlimited freedom to adjust CPU frequencies and ratios for optimized performance

in diverse situations.

USB 3.0 Support

10X Faster Date Rates!

Experience ultra-fast data transfers at 4.8Gbps with USB 3.0—the latest

connectivity standard. Built to connect easily with next generation components and

peripherals, USB 3.0 transfers data 10X faster and is also backward compatible

with USB 2.0 components.

SATA 6Gb/s Support

Experience the Future of Storage!

Supporting next-generation Serial ATA (SATA) storage interface, this motherboard

delivers up to 6Gb/s data transfer rates. Additionally, get enhanced scalability,

faster data retrieval, double the bandwidth of current bus systems.

1-8 Chapter 1: Product Introduction

ASUS Fan Xpert

ASUS Fan Xpert intelligently allows you to adjust both the CPU and chassis fan

speeds according to different ambient temperatures caused by different climate

conditions in different geographic regions and your PC’s loading. The built-in

variety of useful proles offer exible controls of fan speed to achieve a quiet and

cool environment.

ASUS Q-Connector

Make connections quick and accurate

The Q-Connector allows you to connect or disconnect chassis front panel cables

in one easy step with one complete module. This unique adapter eliminates the

trouble of plugging in one cable at a time, making connection quick and accurate.

Kaspersky® Anti-Virus

The best protection from viruses and spyware

Kaspersky® Anti-Virus Personal offers premium antivirus protection for individual

users and home ofces. It is based on advanced antivirus technologies. The

product incorporates the Kaspersky® Anti-Virus engine, which is renowned for

malicious program detection rates that are among the industry's highest.

Chapter 2: Hardware

information

This chapter lists the hardware setup

procedures that you have to perform

when installing system components. It

includes description of the jumpers and

connectors on the motherboard.

ROG Crosshair V Formula

Chapter summary 2

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard overview ................................................................. 2-2

2.3 Building your computer system ............................................... 2-32

2.4 Starting up for the rst time ...................................................... 2-50

2.5 Turning off the computer ........................................................... 2-51

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Before handling components, use a grounded wrist strap or touch a safely

grounded object or a metal object, such as the power supply case, to avoid

damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, ensure that the ATX power

supply is switched off or the power cord is detached from the power

supply. Failure to do so may cause severe damage to the motherboard,

peripherals, or components.

ROG Crosshair V Formula 2-1

2.2 Motherboard overview

2.2.1 Motherboard layout

2-2 Chapter 2: Hardware information

2.2.2 Layout contents

Refer to 2.2.8 and 2.3.11 for more information about internal and rear panel

connectors.

Connectors/Jumpers/Switches/Slots Page

1. 8-pin/4-pin ATX 12V power connectors; EZ PLUG 2-25

2. AMD AM3+ CPU Socket 2-4

3. CPU, chassis, and optional fan connectors (4-pin CPU_FAN; 4-pin

CPU_OPT; 4-pin CHA_FAN1–3; 4-pin OPT_FAN1–3)

2-22

4. DDR3 DIMM slots 2-5

5. Go button 2-29

6. Thermal sensor cable connectors (2-pin OPT_TEMP1–3) 2-23

7. USB3.0 connectors (18-1 pin USB3_56) 2-21

8. AMD SB950 Serial ATA connectors (7-pin SATA6G 1-6) 2-19

9. Asmedia Serial ATA 6Gb/s connectors (7-pin SATA6G_E1) 2-20

10. Clear RTC RAM (3-pin CLRTC_SW) 2-18

11. System panel connector (20-8 pin PANEL) 2-26

12. USB 2.0 connectors (10-1 pin USB910, USB1112) 2-20

13. Reset switch 2-28

14. Power-on switch 2-28

15. CPU Level Up switch 2-30

16. Front panel audio connector (10-1 pin AAFP) 2-24

17. Digital audio connector (4-1 pin SPDIF_OUT) 2-23

18. ROG connect switch (3-pin ROG) 2-29

ROG Crosshair V Formula 2-3

2.2.3 Central Processing Unit (CPU)

The motherboard comes with an AM3+ socket designed for AMD® Next

Generation CPU up to 8-core, also compatible with AMD® socket AM3 for AMD®

Phenom™ II/Athlon™ II/ Sempron™ 100 Series Processors.

Ensure that you use a CPU designed for the AM3+/AM3 socket. The CPU ts in

only one correct orientation. DO NOT force the CPU into the socket to prevent

bending the connectors on the socket and damaging the CPU!

Ensure that all power cables are unplugged before installing the CPU.

2-4 Chapter 2: Hardware information

2.2.4 System memory

The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory

Modules (DIMM) slots.

A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT

install a DDR or DDR2 memory module to the DDR3 slot.

ROG Crosshair V Formula 2-5

Memory congurations

You may install 512MB, 1GB, 2GB, 4GB, and 8GB unbuffered ECC and non-ECC

DDR3 DIMMs into the DIMM sockets.

• The default memory operation frequency is dependent on its Serial

Presence Detect (SPD), which is the standard way of accessing information

from a memory module. Under the default state, some memory modules

for overclocking may operate at a lower frequency than the vendor-marked

value. To operate at the vendor-marked or at a higher frequency, refer

to section 3.3 Extreme Tweaker menu for manual memory frequency

adjustment.

• For system stability, use a more efcient memory cooling system to support

a full memory load (4 DIMMs) or overclocking condition.

• You may install varying memory sizes in Channel A and Channel B. The

system maps the total size of the lower-sized channel for the dual-channel

conguration. Any excess memory from the higher-sized channel is then

mapped for single-channel operation.

• We recommend that you install the memory modules from the red slots for

better overclocking capability.

• Always install DIMMs with the same CAS latency. For optimum

compatibility, we recommend that you obtain memory modules from the

same vendor.

• When overclocking, some AMD CPU models may not support DDR3 1600

or higher frequency DIMMs.

• Due to the memory address limitation on 32-bit Windows OS, when you

install 4GB or more memory on the motherboard, the actual usable memory

for the OS can be about 3GB or less. For effective use of memory, we

recommend that you do any of the following:

- Use a maximum of 3GB system memory if you are using a 32-bit

Windows OS.

- Install a 64-bit Windows OS when you want to install 4GB or more on the

motherboard.

For more details, refer to the Microsoft® support site at

http://support.microsoft.com/kb/929605/en-us.

• This motherboard does not support DIMMs made up of 512Mb (64MB)

chips or less (Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1

Megabyte/MB).

2-6 Chapter 2: Hardware information

Crosshair V Formula Motherboard Qualied Vendors Lists (QVL)

DDR3 1066 MHz capability

Vendors Part No. Size SS/

DS Chip Brand Chip NO. Timing Voltage

DIMM socket

support

(Optional)

2 DIMM 4 DIMM

A-DATA AD63I1B0823EV 2GB SS A-DATA 3CCA-1509A - - • •

A-DATA AXDU1333GC2G9(XMP) 2GB SS - - 9-9-9-24 1.25~1.35 • •

A-DATA SU3U1333W8G9-B 8GB DS Elpida J4208BASE-DJ-F 9 - • •

Apacer 78.01GC6.9L0 1GB SS Apacer AM5D5808DEJSBG 9 - • •

Apacer 78.A1GC6.9L1 2GB DS Apacer AM5D5808FEQSBG 9 - • •

Apacer 78.B1GDE.9L10C 4GB DS Apacer AM5D5908CEHSBG 9 - • •

CORSAIR TW3X4G1333C9A 4GB (2 x 2GB ) DS - - 9-9-9-24 1.5 • •

CORSAIR CMX8GX3M2A1333C9(XMP) 8GB (2 x 4GB ) DS - - 9-9-9-24 1.5 • •

CORSAIR CMX8GX3M4A1333C9 8GB (4 x 2GB) DS - - 9-9-9-24 1.5 • •

Crucial CT12864BA1339.8FF 1GB SS MICRON D9KPT 9 - • •

Crucial BL25664BN1337.16FF(XMP) 2GB DS - - 7-7-7-24 1.65 • •

Crucial CT25664BA1339.16FF 2GB DS MICRON D9KPT 9 - • •

Crucial CT25672BA1339.18FF 2GB DS MICRON D9KPT(ECC) 9 - • •

ELPIDA EBJ10UE8BDF0-DJ-F 1GB SS ELPIDA J1108BDSE-DJ-F - - •

ELPIDA EBJ10UE8EDF0-DJ-F 1GB SS ELPIDA J1108EDSE-DJ-F - - • •

ELPIDA EBJ20UF8BCF0-DJ-F 2GB SS Elpida J2108BCSE-DJ-F - - • •

ELPIDA EBJ21UE8BDF0-DJ-F 2GB DS ELPIDA J1108BDSE-DJ-F - - • •

G.SKILL F3-10600CL9D-4GBNT 4GB (2 x 2GB ) DS G.SKILL D3 128M8CE9 2GB 9-9-9-24 1.5 • •

G.SKILL F3-10666CL8D-

4GBHK(XMP) 4GB (2 x 2GB ) DS - - 8-8-8-21 1.5 • •

G.SKILL F3-10666CL7D-

4GBRH(XMP) 4GB (2 x 2GB) DS - - 7-7-7-21 1.5 • •

G.SKILL F3-10666CL8D-

4GBECO(XMP) 4GB (2 x 2GB) DS - - 8-8-8-24 1.35 • •

G.SKILL F3-10666CL9D-8GBRL 8GB (2 x 4GB ) DS - - 9-9-9-24 1.5 • •

G.SKILL F3-10666CL9D-8GBRL 8GB (2 x 4GB) DS - - 9-9-9-24 1.5 • •

GEIL GET316GB1333C9QC 16GB (4 x 4GB) DS - - 9-9-9-24 1.5 • •

GEIL GG34GB1333C9DC 4GB (2 x 2GB) DS GEIL GL1L128M88BA115FW 9-9-9-24 1.3 • •

GEIL GB34GB1333C7DC 4GB (2 x 2GB) DS GEIL GL1L128M88BA15FW 7-7-7-24 1.5 • •

GEIL GG34GB1333C9DC 4GB (2 x 2GB) DS GEIL GL1L128M88BA12N 9-9-9-24 1.3 • •

GEIL GV34GB1333C7DC 4GB (2 x 2GB) DS - - 7-7-7-24 1.5 • •

GEIL GVP38GB1333C7QC 8GB (4 x 2GB) DS - - 7-7-7-24 1.5 • •

Hynix HMT112U6TFR8A-H9 1GB SS Hynix H5TC1G83TFR - - • •

Vendors Part No. Size SS/

DS Chip Brand Chip NO. Timing Voltage

DIMM socket

support (Optional)

2 DIMM 4 DIMM

Crucial CT12864BA1067.8FF 1GB SS MICRON D9KPT 7 - • •

Crucial CT12864BA1067.8SFD 1GB SS MICRON D9JNL 7 - • •

Crucial CT12872BA1067.9FF 1GB SS MICRON D9KPT(ECC) 7 - • •

Crucial CT25664BA1067.16FF 2GB DS MICRON D9KPT 7 - • •

Crucial CT25664BA1067.16SFD 2GB DS MICRON D9JNL 7 - • •

Crucial CT25672BA1067.18FF 2GB DS MICRON D9KPT(ECC) 7 - • •

ELPIDA EBJ10UE8BAW0-AE-E 1GB SS ELPIDA J1108BABG-DJ-E 7 - • •

ELPIDA EBJ10UE8EDF0-AE-F 1GB SS ELPIDA J1108EDSE-DJ-F - - • •

ELPIDA EBJ21UE8BAW0-AE-E 2GB DS ELPIDA J1108BABG-DJ-E 7 - • •

ELPIDA EBJ21UE8EDF0-AE-F 2GB DS ELPIDA J1108EDSE-DJ-F - - • •

Hynix HMT112U6AFP8C-G7N0 1GB SS HYNIX H5TQ1G83AFPG7C 7 - • •

Hynix HMT125U6AFP8C-G7N0 2GB DS HYNIX H5TQ1G83AFPG7C 7 - • •

Hynix HYMT125U64ZNF8-G7 2GB DS HYNIX HY5TQ1G831ZNFP-G7 7 - • •

Kingston KVR1066D3N7/1G 1GB SS Kingston D1288JPNDPLD9U 7 1.5 • •

Kingston KVR1066D3N7/2G 2GB DS Elpida J1108BDSE-DJ-F 7 1.5 • •

KINGSTON KVR1066D3N7K2/4G 4GB(2 x 2GB ) DS KINGSTON D1288JELDNGD9U - 1.5 • •

SAMSUNG M378B5273BH1-CF8 4GB DS SAMSUNG K4B2G0846B-HCF8 8 1.5 • •

Elixir M2Y2G64CB8HC5N-BE 2GB DS Elixir N2CB1G80CN-BE - - • •

Elixir M2Y2G64CB8HC9N-BE 2GB DS - - - - • •

Crosshair V Formula Motherboard Qualied Vendors Lists (QVL)

DDR3 1333 MHz capability

(DDR3 1333 MHz continued on next page)

ROG Crosshair V Formula 2-7

Hynix HMT325U6BFR8C-H9 2GB SS Hynix H5TQ2G83BFR - - • •

Hynix HMT125U6BFR8C-H9 2GB DS Hynix H5TQ1G83BFRH9C 9 - • •

Hynix HMT125U6TFR8A-H9 2GB DS Hynix H5TC1G83TFR - - • •

Hynix HMT351U6BFR8C-H9 4GB DS Hynix H5TQ2G83BFR - - • •

KINGMAX FLFE85F-C8KM9 2GB SS Kingmax KFC8FNMXF-BXX-15A - - •

KINGMAX FLFE85F-B8KL9 2GB DS KINGMAX KFB8FNLXL-BNF-15A - - • •

KINGMAX FLFF65F-C8KM9 4GB DS Kingmax KFC8FNMXF-BXX-15A - - • •

Kingston KVR1333D3N9/1G 1GB SS Elpida J1108BDSE-DJ-F 9 1.5 • •

Kingston KVR1333D3N9/2G 2GB DS Kingston D1288JPNDPLD9U 9 1.5 • •

Kingston KHX1333C9D3UK2/

4GX(XMP) 4GB (2 x 2GB) DS - - 9 1.25 • •

KINGSTON KVR1333D3N9K2/4G 4GB (2 x 2GB) DS KINGSTON D1288JEMFPGD9U - 1.5 • •

MICRON MT4JTF12864AZ-1G4D1 1GB SS Micron D9LGQ - - • •

MICRON MT8JTF25664AZ-1G4D1 2GB SS Micron D9LGK - - • •

MICRON MT16JTF51264AZ-1G4D1 4GB DS Micron D9LGK - - • •

OCZ OCZ3P1333LV3GK 3GB (3 x 1GB) SS - - 7-7-7 1.65 • •

OCZ OCZ3G1333LV4GK 4GB (2 x 2GB) DS - - 9-9-9 1.65 • •

OCZ OCZ3P1333LV4GK 4GB (2 x 2GB) DS - - 7-7-7 1.65 • •

OCZ OCZ3G1333LV8GK 8GB (2 x 4GB) DS - - 9-9-9 1.65 • •

PSC PC310600U-9-10-A0 1GB SS PSC A3P1GF3FGF - - • •

PSC AL8F8G73D-DG1 2GB DS PSC A3P1GF3DGF - - • •

PSC PC310600U-9-10-B0 2GB DS PSC A3P1GF3FGF - - • •

SAMSUNG M378B2873EH1-CH9 1GB SS SAMSUNG K4B1G0846E - - • •

SAMSUNG M378B2873FHS-CH9 1GB SS SAMSUNG K4B1G0846F - - • •

SAMSUNG M378B5773DH0-CH9 2GB SS Samsung K4B2G08460 - - • •

SAMSUNG M378B5673FH0-CH9 2GB DS SAMSUNG K4B1G0846F - - • •

SAMSUNG M378B5273BH1-CH9 4GB DS SAMSUNG K4B2G0846B-HCH9 9 - • •

SAMSUNG M378B5273CH0-CH9 4GB DS SAMSUNG K4B2G0846C K4B2G0846C - • •

SAMSUNG M378B5273DH0-CH9 4GB DS Samsung K4B2G08460 - - • •

SAMSUNG M378B1G73AH0-CH9 8GB DS SAMSUNG K4B4G0846A-HCH9 - - • •

Transcend TS256MLK64V3N (566577) 2GB SS Hynix H5TQ2G83BFR 9 - • •

Transcend TS256MLK64V3N (574206) 2GB SS Micron D9LGK 9 - • •

Transcend TS512MLK64V3N (389889) 4GB DS Hynix H5TQ2G83BFR 9 - •

Transcend TS512MLK64V3N (574831) 4GB DS Micron D9LGK 9 - • •

ACTICA ACT1GHU64B8F1333S 1GB SS Samsung K4B1G0846F - - • •

ACTICA ACT1GHU72C8G1333S 1GB SS Samsung K4B1G0846F(ECC) - - • •

ACTICA ACT2GHU64B8G1333M 2GB DS Micron D9KPT - - • •

ACTICA ACT2GHU64B8G1333S 2GB DS Samsung K4B1G0846F - - • •

ACTICA ACT2GHU72D8G1333M 2GB DS Micron D9KPT(ECC) - - • •

ACTICA ACT2GHU72D8G1333S 2GB DS Samsung K4B1G0846F(ECC) - - • •

ACTICA ACT4GHU64B8H1333H 4GB DS Hynix H5TQ2G83AFR - - • •

ACTICA ACT4GHU72D8H1333H 4GB DS Hynix H5TQ2G83AFR(ECC) - - • •

BUFFALO D3U1333-1G 1GB SS Elpida J1108BFBG-DJ-F - - • •

BUFFALO FSH1333D3G-T3G(XMP) 3GB(3 x 1GB) SS - - 7-7-7-20 - • •

BUFFALO D3U1333-2G 2GB DS Elpida J1108BFBG-DJ-F - • •

BUFFALO D3U1333-4G 4GB DS NANYA NT5CB256M8BN-CG - • •

EK Memory EKM324L28BP8-I13 4GB(2 x 2GB) DS - - 9 - • •

Elixir M2F2G64CB88B7N-CG 2GB SS Elixir N2CB2G808N-CG - - • •

Elixir M2F4G64CB8HB5N-CG 4GB DS Elixir N2CB2G808N-CG - - • •

GoodRam GR1333D364L9/2G 2GB DS Qimonda IDSH1G-03A1F1C-13H - - • •

KINGTIGER F10DA2T1680 2GB DS KINGTIGER KTG1333PS1208NST-

C9 - - • •

KINGTIGER KTG2G1333PG3 2GB DS - - - - • •

Patriot PSD32G13332 2GB DS Prtriot PM128M8D3BU-15 9 - • •

Patriot PGS34G1333LLKA 4GB(2 x 2GB) DS - - 7-7-7-20 1.7 • •

Silicon

Power SP001GBLTE133S01 1GB SS NANYA NT5CB128M8AN-CG - - • •

Silicon

Power SP001GBLTU1333S01 1GB SS NANYA NT5CB128M8AN-CG - - • •

Silicon

Power SP002GBLTE133S01 2GB DS NANYA NT5CB128M8AN-CG - - • •

Silicon

Power SP002GBLTU133S02 2GB DS S-POWER I0YT3E0 9 - • •

Team TXD31024M1333C7(XMP) 1GB SS Team T3D1288LT-13 7-7-7-21 1.75 • •

Team TXD31048M1333C7-D(XMP) 1GB SS Team T3D1288LT-13 7-7-7-21 1.75 • •

Team TXD32048M1333C7-D(XMP) 2GB DS Team T3D1288LT-13 7-7-7-21 1.5-1.6 • •

(DDR3 1333 MHz continued)

2-8 Chapter 2: Hardware information

Crosshair V Formula Motherboard Qualied Vendors Lists (QVL)

DDR3 1600 MHz capability

Vendors Part No. Size SS/

Chip

Brand Chip NO. Timing Voltage

DIMM socket

support (Optional)

2 DIMM 4 DIMM

A-DATA AX3U1600GC4G9(XMP) 4GB DS - - 9-9-9-24 1.55~1.75 • •

A-DATA AX3U1600XC4G79(XMP) 4GB DS - - 7-9-7-21 1.55~1.75 • •

CORSAIR HX3X12G1600C9(XMP) 12GB (6 x 2GB ) DS - - 9-9-9-24 1.6 • •

CORSAIR CMZ16GX3M4A1600C9(XMP) 16GB (4 x 4GB ) DS - - 9-9-9-24 1.5 • •

CORSAIR CMG4GX3M2A1600C6 4GB (2 x 2GB ) DS - - 6-6-6-18 1.65 • •

CORSAIR CMD4GX3M2B1600C8 4GB (2 x 2GB ) DS - - 8-8-8-24 1.65 •

CORSAIR CMG4GX3M2A1600C6 4GB (2 x 2GB ) DS - - 6-6-6-18 1.65 •

CORSAIR CMX4GX3M2A1600C8(XMP) 4GB (2 x 2GB ) DS - - 8-8-8-24 1.65 • •

CORSAIR CMD4GX3M2A1600C8(XMP) 4GB (2 x 2GB) DS - - 8-8-8-24 1.65 •

CORSAIR CMG4GX3M2A1600C7(XMP) 4GB (2 x 2GB) DS - - 7-7-7-20 1.65 •

CORSAIR CMX4GX3M2A1600C9(XMP) 4GB (2 x 2GB) DS - - 9-9-9-24 1.65 •

CORSAIR CMP6GX3M3A1600C8(XMP) 6GB (3 x 2GB ) DS - - 8-8-8-24 1.65 • •

CORSAIR CMX6GX3M3C1600C7(XMP) 6GB (3 x 2GB ) DS - - 7-8-7-20 1.65 • •

CORSAIR TR3X6G1600C8D(XMP) 6GB (3 x 2GB) DS - - 8-8-8-24 1.65 •

CORSAIR CMP8GX3M2A1600C9(XMP) 8GB (2 x 4GB ) DS - - 9-9-9-24 1.65 •

CORSAIR CMZ8GX3M2A1600C8(XMP) 8GB (2 x 4GB ) DS - - 8-8-8-24 1.5 • •

CORSAIR CMZ8GX3M2A1600C9(XMP) 8GB (2 x 4GB ) DS - - 9-9-9-24 1.5 • •

CORSAIR CMX8GX3M4A1600C9(XMP) 8GB (4 x 2GB) DS - - 9-9-9-24 1.65 •

Crucial BL12864BN1608.8FF(XMP) 2GB (2 x 1GB ) SS - - 8-8-8-24 1.65 • •

Crucial BL25664BN1608.16FF(XMP) 2GB DS - - 8-8-8-24 1.65 • •

G.SKILL F3-12800CL9D-4GBNQ(XMP) 4GB (2 x 2GB ) DS - - 9-9-9-24 1.5 • •

G.SKILL F3-12800CL7D-4GBECO(XMP) 4GB (2 x 2GB) DS - - 7-8-7-24 - •

G.SKILL F3-12800CL7D-4GBRH(XMP) 4GB (2 x 2GB) DS - - 7-7-7-24 1.65 • •

G.SKILL F3-12800CL8D-4GBRM(XMP) 4GB (2 x 2GB) DS - - 8-8-8-24 1.6 • •

G.SKILL F3-12800CL9D-4GBECO(XMP) 4GB (2 x 2GB) DS - - 9-9-9-24 1.35 • •

G.SKILL F3-12800CL8T-6GBPI(XMP) 6GB (3 x 2GB) DS - - 8-8-8-21 1.6~1.65 •

G.SKILL F3-12800CL7D-8GBRH(XMP) 8GB (2 x 4GB ) DS - - 7-8-7-24 1.6 • •

G.SKILL F3-12800CL7D-8GBXH(XMP) 8GB (2 x 4GB ) DS - - 7-8-7-24 1.6 • •

G.SKILL F3-12800CL9D-8GBRL(XMP) 8GB (2 x 4GB ) DS - - 9-9-9-24 1.5 • •

G.SKILL F3-12800CL9D-8GBSR2(XMP) 8GB (2x 4GB ) DS - - 9-9-9-24 1.25 • •

G.SKILL F3-12800CL8D-8GBECO(XMP) 8GB (2x4GB ) DS - - 8-8-8-24 1.35 • •

GEIL GET316GB1600C9QC(XMP) 16GB (4 x 4GB ) DS - - 9-9-9-28 1.6 • •

GEIL GE34GB1600C9DC(XMP) 4GB (2 x 2GB ) DS - - 9-9-9-28 1.6 •

GEIL GUP34GB1600C7DC(XMP) 4GB (2 x 2GB ) DS - - 7-7-7-24 1.6 • •

GEIL GVP38GB1600C8QC(XMP) 8GB (4 x 2GB ) DS - - 8-8-8-28 1.6 • •

KINGMAX FLGD45F-B8MF7(XMP) 1GB SS - - - • •

KINGSTON KHX1600C9D3K3/12GX(XMP) 12GB (3 x 4GB ) DS N/A - - 1.65 • •

KINGSTON KHX1600C9D3K6/24GX(XMP) 24GB (6 x 4GB ) DS - - 9 1.65 •

KINGSTON KHX1600C7D3K2/4GX(XMP) 4GB (2 x 2GB ) DS - - - 1.65 • •

KINGSTON KHX1600C8D3K2/4GX(XMP) 4GB (2 x 2GB ) DS - - 8 1.65 • •

KINGSTON KHX1600C9D3K2/4GX(XMP) 4GB (2 x 2GB ) DS - - - 1.65 • •

Kingston KHX1600C9D3LK2/4GX(XMP) 4GB (2 x 2GB ) DS - - - 1.65 • •

Kingston KHX1600C9D3X1K2/4G 4GB (2 x 2GB ) DS - - - 1.65 • •

KINGSTON KHX1600C9D3X2K2/4GX(XMP) 4GB (2 x 2GB ) DS - - 9 1.65 • •

KINGSTON KHX1600C9D3K3/6GX(XMP) 6GB (3 x 2GB ) DS - - 9 1.65 • •

Kingston KHX1600C9D3T1BK3/

6GX(XMP) 6GB (3 x 2GB ) DS - - 9 1.65 • •

KINGSTON KHX1600C9D3T1K3/6GX(XMP) 6GB (3 x 2GB ) DS - - - 1.65 • •

OCZ OCZ3G16004GK 4GB (2 x 2GB ) DS - - 8-8-8 1.7 •

OCZ OCZ3BE1600C8LV4GK 4GB (2 x 2GB ) DS - - 8-8-8 1.65 • •

OCZ OCZ3OB1600LV4GK 4GB (2 x 2GB) DS - - 9-9-9 1.65 • •

OCZ OCZ3X1600LV4GK(XMP) 4GB (2 x 2GB) DS - - 8-8-8 1.65 • •

OCZ OCZ3G1600LV6GK 6GB (3 x 2GB) DS - - 8-8-8 1.65 •

OCZ OCZ3X1600LV6GK(XMP) 6GB (3 x 2GB) DS - - 8-8-8 1.65 • •

Super Talent WP160UX4G8(XMP) 4GB (2 x 2GB) DS - - 8 - •

Super Talent WP160UX4G9(XMP) 4GB (2 x 2GB) DS - - 9 - • •

Super Talent WB160UX6G8(XMP) 6GB (3 x 2GB) DS - - - - • •

Super Talent WB160UX6G8(XMP) 6GB (3 x 2GB) DS - - 8 - • •

AEXEA AXA3PS2G1600S18V(XMP) 2GB DS - - - 1.65 • •

AEXEA AXA3PS4GK1600S18V(XMP) 4GB (2 x 2GB ) DS - - - 1.65 • •

Asint SLZ3128M8-EGJ1D(XMP) 2GB DS Asint 3128M8-

GJ1D - - • •

(DDR3 1600 MHz continued on next page)

ROG Crosshair V Formula 2-9

Crosshair V Formula Motherboard Qualied Vendors Lists (QVL)

DDR3 1866 MHz capability

Vendors Part No. Size SS/

Chip

Brand Chip NO. Timing Voltage

DIMM socket support

(Optional)

1 DIMM 2 DIMM 4 DIMM

CORSAIR CMZ8GX3M2A1866C9(XMP) 8GB (2 x 4GB ) DS - - 9-10-9-27 1.5 • • •

G.SKILL F3-15000CL9D-4GBRH (XMP) 4GB (2 x 2GB) DS - - 9-9-9-24 1.65 • • •

G.SKILL F3-15000CL9D-4GBTD(XMP) 4GB (2 x 2GB) DS - - 9-9-9-24 1.65 • • •

G.SKILL F3-14900CL9D-8GBSR(XMP) 8GB (2 x 4GB ) DS - - 9-10-9-28 1.5 • • •

KINGSTON KHX1866C9D3T1K3/3GX(XMP) 3GB (3 x 1GB ) SS - - - 1.65 • • •

OCZ OCZ3RPR1866C9LV3GK 3GB (3 x 1GB ) DS - - 9-9-9 1.65 •

OCZ OCZ3G1866LV4GK 4GB (2 x 2GB ) DS - - 10-10-10 1.65 • •

OCZ OCZ3P1866C9LV6GK 6GB (3 x 2GB) DS - - 9-9-9 1.65 •

Super Talent W1866UX2G8(XMP) 2GB (2 x 1GB) SS - - 8-8-8-24 - •

Team TXD32048M1866C9(XMP) 2GB DS Team T3D1288RT-16 9-9-9-24 1.65 • • •

Crosshair V Formula Motherboard Qualied Vendors Lists (QVL)

DDR3 1800 MHz capability

Vendors Part No. Size SS/

Chip

Brand Chip NO. Timing Voltage

DIMM socket support

(Optional)

1 DIMM 2 DIMM 4 DIMM

G.SKILL F3-14400CL6D-4GBFLS(XMP) 4GB (2 x 2GB) DS - - 6-8-6-24 1.65 • • •

G.SKILL F3-14400CL9D-4GBRL(XMP) 4GB (2 x 2GB) DS - - 9-9-9-24 1.6 • • •

KINGSTON KHX1800C9D3T1K3/6GX(XMP) 6GB (3 x 2GB) DS - - - 1.65 • • •

EK Memory EKM324L28BP8-I16(XMP) 4GB (2 x 2GB ) DS - - 9 - • •

EK Memory EKM324L28BP8-I16(XMP) 4GB (2 x 2GB) DS - - 9 - • •

Elixir M2P2G64CB8HC9N-DG(XMP) 2GB DS - - - - • •

GoodRam GR1600D364L9/2G 2GB DS GoodRam GF1008KC-

JN - - • •

KINGTIGER KTG2G1600PG3(XMP) 2GB DS - - - - • •

Mushkin 996805(XMP) 4GB (2 x 2GB ) DS - - 6-8-6-24 1.65 • •

Mushkin 998805(XMP) 6GB (3 x 2GB ) DS - - 6-8-6-24 1.65 • •

Patriot PX7312G1600LLK(XMP) 12GB (3 x 4GB ) DS - - 8-9-8-24 1.65 • •

Patriot PGS34G1600LLKA2 4GB (2 x 2GB ) DS - - 8-8-8-24 1.7 • •

Patriot PGS34G1600LLKA 4GB (2 x 2GB ) DS - - 7-7-7-20 1.7 • •

PATRIOT PGS34G1600LLKA 4GB (2 x 2GB) DS - - 7-7-7-20 1.7 • •

Patriot PVT36G1600LLK(XMP) 6GB (3 x 2GB) DS - - 8-8-8-24 1.65 •

Patriot PX538G1600LLK(XMP) 8GB (2 x 4GB ) DS - - 8-9-8-24 1.65 • •

Team TXD31024M1600C8-D(XMP) 1GB SS Team T3D1288RT-

16 8-8-8-24 1.65 • •

Team TXD32048M1600C7-L(XMP) 2GB DS Team T3D1288LT-

16 7-7-7-24 1.65 • •

Team TXD32048M1600HC8-D(XMP) 2GB DS Team T3D1288RT-

16 8-8-8-24 1.65 • •

(DDR3 1600 MHz continued)

2-10 Chapter 2: Hardware information

Crosshair V Formula Motherboard Qualified Vendors Lists (QVL)

DDR3 2000 MHz capability

Crosshair V Formula Motherboard Qualied Vendors Lists (QVL)

DDR3 2133 MHz capability

Vendors Part No. Size SS/DS Chip Brand Chip NO. Timing Voltage

DIMM socket support

(Optional)

2 DIMM 4 DIMM

G.SKILL F3-17066CL7D-4GBPIS 4GB (2 x 2GB) DS - - 7-10-7-27 1.65 •

Side(s): SS - Single-sided DS - Double-sided

DIMM support:

• 1 DIMM: Supports one (1) module inserted into any slot as Single-channel

memory conguration.

• 2 DIMMs: Supports one pair of modules inserted into either the red or the

black slots as one pair of Dual-channel memory conguration.

• 4 DIMMs: Supports four (4) modules inserted into both the red or the black

slots as two pairs of Dual-channel memory conguration.

• When installing total memory of 4GB capacity or more, Windows 32-

bit operation system may only recognize less than 3GB. Hence, a total

installed memory of less than 3GB is recommended.

• The default DIMM frequency depends on its Seriel Presence Detect (SPD),

which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may

operate at a lower frequency than the vendor-marked value.

Vendors Part No. Size SS/

Chip

Brand Chip NO. Timing Voltage

DIMM socket support

(Optional)

1 DIMM 2 DIMM 4 DIMM

A-DATA AX3U2000GB2G9B(XMP) 2GB DS - - 9-11-9-27 1.55~1.75 •

A-DATA AX3U2000GC4G9B(XMP) 4GB DS - - 9-11-9-27 1.55~1.75 • •

Apacer 78.AAGD5.9KD(XMP) 6GB (3 x 2GB) DS - - 9-9-9-27 - •

CORSAIR CMT6GX3M3A2000C8(XMP) 6GB (3 x 2GB ) DS - - 8-9-8-24 1.65 •

G.SKILL F3-16000CL9D-4GBRH(XMP) 4GB (2 x 2GB) DS - - 9-9-9-24 1.65 • •

G.SKILL F3-16000CL9D-4GBTD(XMP) 4GB (2 x 2GB) DS - - 9-9-9-24 1.65 • •

G.SKILL F3-16000CL9T-6GBPS(XMP) 6GB (3 x 2GB) DS - - 9-9-9-24 1.65 •

G.SKILL F3-16000CL9T-6GBTD(XMP) 6GB (3 x 2GB) DS - - 9-9-9-24 1.6 •

G.SKILL F3-16000CL7Q-8GBFLS(XMP) 8GB (4 x 2GB) DS - - 7-9-7-24 1.65 • •

GEIL GUP34GB2000C9DC(XMP) 4GB (2 x 2GB ) DS - - 9-9-9-28 1.65 • •

GEIL GE38GB2000C9QC(XMP) 8GB (4 x 2GB) DS - - 9-9-9-28 1.65 •

KINGSTON KHX2000C9AD3T1K3/

3GX(XMP) 3GB (3 x 1GB ) SS - - - 1.65 •

KINGSTON KHX2000C9AD3T1K2/

4GX(XMP) 4GB (2 x 2GB ) DS - - 9 1.65 •

KINGSTON KHX2000C9D3T1K2/4GX(XMP) 4GB (2 x 2GB ) DS - - - 1.65 •

KINGSTON KHX2000C9AD3T1K3/

6GX(XMP) 6GB (3 x 2GB ) DS - - 9 1.65 •

KINGSTON KHX2000C9AD3T1K3/

6GX(XMP) 6GB (3 x 2GB ) DS - - - 1.65 •

KINGSTON KHX2000C9AD3W1K3/

6GX(XMP) 6GB (3 x 2GB ) DS - - 9 1.65 •

OCZ OCZ3B2000LV6GK 6GB (3 x 2GB) DS - - 7-8-7 1.65 •

Transcend TX2000KLN-8GK

(388375)(XMP) 4GB DS - - 1.6 • •

AEXEA AXA3ES2G2000LG28V(XMP) 2GB DS - - - 1.65 •

AEXEA AXA3ES4GK2000LG28V(XMP) 4GB (2 x 2GB ) DS - - - 1.65 •

Patriot PX7312G2000ELK(XMP) 12GB (3 x 4GB ) DS - - 9-11-9-27 1.65 • •

Team TXD32048M2000C9(XMP) 2GB DS Team T3D1288RT-20 9-9-9-24 1.5 •

Team TXD32048M2000C9-L(XMP) 2GB DS Team T3D1288RT-20 9-9-9-24 1.6 •

ROG Crosshair V Formula 2-11

2.2.5 Expansion slots

In the future, you may need to install expansion cards. The following sub-sections

describe the slots and the expansion cards that they support.

Installing an expansion card

To install an expansion card:

1. Before installing the expansion card, read the documentation that came with

it and make the necessary hardware settings for the card.

2. Remove the system unit cover (if your motherboard is already installed in a

chassis).

3. Remove the bracket opposite the slot that you intend to use. Keep the screw

for later use.

4. Align the card connector with the slot and press rmly until the card is

completely seated on the slot.

5. Secure the card to the chassis with the screw you removed earlier.

6. Replace the system cover.

Ensure to unplug the power cord before adding or removing expansion cards.

Failure to do so may cause you physical injury and damage motherboard

components.

When using PCI cards on shared slots, ensure that the drivers support “Share

IRQ” or that the cards do not need IRQ assignments. Otherwise, conicts will

arise between the two PCI groups, making the system unstable and the card

inoperable. Refer to the table on the next page for details.

2-12 Chapter 2: Hardware information

PCI Express x1 slots

This motherboard has one PCI Express x1 slot that supports a PCI Express x1

card complying with the PCI Express specications. Refer to the gure below for

the location of the slot.

PCI Express x16 slots

This motherboard has four PCI Express x16 slots that support PCI Express x16

cards complying with the PCI Express specications. Refer to the gure below for

the location of the slot.

VGA conguration PCI Express operating mode

PCIe x16_1 PCIe x8/x1_2 PCIe x16/x8_3

Single VGA/PCIe card x16 (Recommend

for single VGA) N/A x16 (Single VGA)

Dual VGA/PCIe card x16 x1 x16

Triple VGA/PCIe card x16 x8 x8

ROG Crosshair V Formula 2-13

• In single VGA card mode, use rst the PCIe 2.0 x16_1 slot or PCIe 2.0 x16/

x8_3 slot for a PCI Express x16 graphics card to get better performance.

• In CrossFireX™ or SLI™ mode, use the PCIe 2.0 x16_1 and PCIe 2.0 x16/

x8_3 slots for PCI Express x16 graphics cards to get better performance.

• Use the PCIe x16_1, PCIe x8/x1_2, and PCIe x16/x8_3 slots for 3-Way SLI

or CrossFireX™ mode.

• If you install a PCIe x16 graphics card on to the PCIe x16_1 slot, a PCIe

device with a bandwidth faster than x8 link to the PCIe x16/x8_3 slot, and a

PCIe device with a bandwidth slower than x4 link to the PCIe x8/x1_2 slot,

the three PCIe x16 slots will work at x16, x16, x1 link as the default.

• If you install a PCIe x16 graphics card on to the PCIe x16_1 slot, a PCIe

device with a bandwidth slower than x8 link to the PCIe x16/x8_3 slot, and

a PCIe device with a bandwidth faster than x4 link to the PCIe x8/x1_2 slot,

the three PCIe x16 slots will work at x16, x8, x8 link as the default.

• We recommend that you provide sufcient power when running

CrossFireX™ or SLI™ mode.

• Connect a chassis fan to the motherboard connector labeled

CHA_FAN1/2/3 when using multiple graphics cards for better thermal

environment.

IRQ assignments for this motherboard

A B C D E F G H

Intel 82583V – ––––shared –

ASM1061 ––––shared – – –

ASM1042 USB3.0_1 –––shared – – – –

ASM1042 USB3.0_2 – – shared –––––

ASM1042 USB3.0_3 shared –––––––

Onchip SATA Controller –––shared – – – –

Onchip USB_1 – – shared –––––

Onchip USB_2 – – shared –––––

Onchip Azaliz shared –––––––

PCI Slot ––––shared – – –

PCIE_X16_1 shared –––––––

PCIE_X8/X1_2 ––––shared – – –

PCIE_X16/X8_3 shared – – – – – –

PCIE_X4_4 shared –––––––

PCIE_X1_1 –––––––shared

2-14 Chapter 2: Hardware information

2.2.6 Onboard LEDs

The motherboard comes with a set of LEDs that indicate the voltage conditions

of CPU, memory, northbridge and southbridge. You may adjust the voltages in

BIOS. There are also an LED for hard disk drive activity and an onboard switch for

power status. For more information about voltage adjustment, refer to 3.3 Extreme

Tweaker menu.

1. CPU LED

The CPU LED has three voltage displays: CPU Voltage, CPU/NB, and VDDA

Voltage 2.5V; you can select the voltage to display in BIOS. Refer to the

illustration below for the location of the CPU LED and the table below for LED

denition.

2. Memory LED

The Memory LED has two voltage displays: DDR and VDDR. Refer to the

illustration below for the location of the memory LED and the table below for

LED denition.

3. Northbridge/Southbridge LEDs

Northbridge and southbridge LEDs each have two different voltage displays.

The northbridge LED displays the NB voltage, the NB 1.8V voltage or the

VDDPCIE The southbridge LED shows either the SB voltage or the HT

voltage. You can select the voltage to display in BIOS. Refer to the illustration

below for the location of the northbridge/southbridge LEDs and the table

below for LED denition.

ROG Crosshair V Formula 2-15

4. Hard Disk LED

The hard disk LED is designed to indicate the hard disk activity. It blinks when

data is being written into or read from the hard disk drive. The LED does not

light up when there is no hard disk drive connected to the motherboard or

when the hard disk drive does not function.

Normal (green) High (yellow) Crazy (red)

CPU Voltage (default) by CPU–1.36875 1.3750–1.49375 1.5–by CPU

CPU/NB Voltage by CPU–1.36875 1.3750–1.49375 1.5–by CPU

VDDA Voltage 2.5V 2.20000–2.76875 2.77500–3.00625 3.01250–3.18750

NB Voltage 0.80000–1.59375 1.60000–1.84375 1.85000-2.00000

NB 1.8 Voltage 1.80200-1.89475 1.90800-1.94775 1.96100-3.00775

VDD PCIE Voltage 1.11300-1.59000 1.60325-1.84175 1.85500-2.00075

SB Voltage 1.11300-1.44425 1.45750-1.69600 1.70925-1.802

HT Voltage 0.80000–1.39375 1.40000-1.65000 1.65625-2.00000

DRAM BUS 1.5V Voltage 1.20000-1.72500 1.73125-2.32500 2.33125-2.90000

VDDR Voltage 1.20500-1.39125 1.40450-1.65625 1.66950-1.802

2-16 Chapter 2: Hardware information

5. GO LED

Blinking: Indicates that MemOK! is enabled before POST.

Lighting: Indicates that the system loads the preset prole (GO_Button le)

for temporary overclocking when in OS.

6. Q LED

Q LEDs check key components (CPU, DRAM, VGA card, and booting

devices) in sequence during motherboard booting process. If an error is

found , the corresponding LED will continue lighting until the problem is

solved. This user-friendly design provides an intuitional way to locate the root

problem within a second.

ROG Crosshair V Formula 2-17

7. Power LED

The motherboard comes with a power-on switch that lights up to indicate

that the system is ON, in sleep mode, or in soft-off mode. This is a reminder

that you should shut down the system and unplug the power cable before

removing or plugging in any motherboard component. The illustration below

shows the location of the onboard power-on switch.

2-18 Chapter 2: Hardware information

2.2.7 Jumpers

1. Clear RTC RAM (3-pin CLRTC)

This jumper allows you to clear the Real Time Clock (RTC) RAM in

CMOS. You can clear the CMOS memory of date, time, and system setup

parameters by erasing the CMOS RTC RAM data. The onboard button

cell battery powers the RAM data in CMOS, which include system setup

information such as system passwords.

To erase the RTC RAM

1. Turn OFF the computer and unplug the power cord.

2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on

pins 2-3 for about 5–10 seconds, then move the cap back to pins 1-2.

3. Plug the power cord and turn ON the computer.

4. Hold down the <Del> key during the boot process and enter BIOS setup to

re-enter data.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper

default position. Removing the cap will cause system boot failure!

• If the steps above do not help, remove the onboard battery and move

the jumper again to clear the CMOS RTC RAM data. After the CMOS

clearance, reinstall the battery.

• You do not need to clear the RTC when the system hangs due to

overclocking. For system failure due to overclocking, use the C.P.R. (CPU

Parameter Recall) feature. Shut down and reboot the system so the BIOS

can automatically reset parameter settings to default values.

• Due to the chipset behavior, AC power off is required to enable C.P.R.

function. You must turn off and on the power supply or unplug and plug the

power cord before rebooting the system.

ROG Crosshair V Formula 2-19

AMD

2.2.8 Internal connectors

1. AMD SB950 Serial ATA connectors (7-pin SATA6G_1-6)AMD SB950 Serial ATA connectors (7-pin SATA6G_1-6)

These connectors are for the Serial ATA signal cables for Serial ATA hard disk

drives and optical disc drives.

If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5,

and 10 conguration with the onboard AMD® SB950 RAID controllers.

• These connectors are set to AHCI mode by default. In AHCI mode, you

can connect Serial ATA boot/data hard disk drives to these connectors.

If you intend to create a Serial ATA RAID set using these connectors, set

the SATA Port1-4 item in the BIOS to [RAID]. See section 3.5.3 Storage

Conguration for details.

• Before creating a RAID set, refer to section 4.4 RAID congurations or the

manual bundled in the motherboard support DVD.

•

You must install Windows® XP Service Pack 2 or later versions before using

Serial ATA hard disk drives. The Serial ATA RAID feature is available only if

you are using Windows® XP SP2 or later versions.

•

When using hot-plug and NCQ, set the SATA Port1-4 in the BIOS to [AHCI].

See section 3.5.3 Storage Conguration for details.

2-20 Chapter 2: Hardware information

3. USB 2.0 connectors (10-1 pin USB910 and USB1112)

These connectors are for USB 2.0 ports. Connect the USB module cables to

these connectors, then install the modules to slots opening at the back of the

system chassis. This USB connectors comply with USB 2.0 specication that

supports up to 480 Mbps connection speed.

2. Asmedia® Serial ATA 6Gb/s connectors (7-pin SATA6G_E1)

These connectors connect to Serial ATA 6Gb/s hard disk drives and optical

disc drives via Serial ATA 6Gb/s signal cables.

ROG Crosshair V Formula 2-21

Never connect a 1394 cable to the USB connectors. Doing so will damage the

motherboard!

4. USB 3.0 connectors (18-1 pin USB3_56)

These connectors are for USB 3.0 ports. Connect the USB 3.0 module cables

to these connectors, then install the modules to slots opening at the back of

the system chassis.

You can connect the USB 2.0 cable to ASUS Q-Connector (USB, blue) rst, and

then install the Q-Connector (USB) to the USB 2.0 connector onboard.

2-22 Chapter 2: Hardware information

5. CPU, chassis, and optional fan connectors

(4-pin CPU_FAN, 4-pin CPU_OPT, 4-pin CHA_FAN1–3, 4-pin OPT_FAN1–

The fan connectors support cooling fans of 350 mA–2000 mA (24 W max.)

or a total of 1 A–7 A (84 W max.) at +12V. Connect the fan cables to the fan

connectors on the motherboard, ensuring that the black wire of each cable

matches the ground pin of the connector.

DO NOT forget to connect the fan cables to the fan connectors. Insufcient air

ow inside the system may damage the motherboard components. These are

not jumpers! DO NOT place jumper caps on the fan connectors!

If you install two VGA cards, we recommend that you plug the chassis fan

cable to the motherboard connector labeled OPT_FAN1/2/3 for better thermal

environment.

ROG Crosshair V Formula 2-23

6. Thermal sensor cable connectors (2-pin OPT_TEMP1/2/3)

These connectors are for temperature monitoring. Connect the thermal

sensor cables to these connectors and place the other ends to the devices

which you want to monitor temperature. The optional fan1/2/3 can work with

the temperature sensors for a better cooling effect.

Enable OPT FAN1/2/3 overheat protection in BIOS if you connect thermal

sensor cables to these connectors.

7. Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF)

port(s). Connect the S/PDIF Out module cable to this connector, then install

the module to a slot opening at the back of the system chassis.

The S/PDIF module and the thermal sensor cable are purchased separately.

2-24 Chapter 2: Hardware information

• We recommend that you connect a high-definition front panel audio

module to this connector to avail of the motherboard’s high-denition audio

capability.

• If you want to connect a high-denition front panel audio module to thisIf you want to connect a high-denition front panel audio module to this

connector, set the Front Panel Type item in the BIOS setup to [HD Audio];

if you want to connect an AC'97 front panel audio module to this connector,

set the item to [AC97]. By default, this connector is set to [HD Audio].

8. Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that

supports either HD Audio or legacy AC`97 audio standard. Connect one end

of the front panel audio I/O module cable to this connector.

ROG Crosshair V Formula 2-25

9. ATX power connectors

(8-pin EATX12V, 4-pin EATX12V_1, 24-pin EATXPWR, 4-pin EZ_PLUG)

These connectors are for ATX power supply plugs. The power supply plugs

are designed to t these connectors in only one orientation. Find the proper

orientation and push down rmly until the connectors completely t.

• For a fully congured system, we recommend that you use a power supply

unit (PSU) that complies with ATX 12 V Specication 2.0 (or later version)

and provides a minimum power of 600 W.

• Do not forget to connect the 8-pin EATX12V power plug; otherwise, the

system will not boot.

• Connect the 4-pin EZ_PLUG power plugs to ensure sufcient power supply

when you install multiple graphics cards.

• Use of a PSU with a higher power output is recommended when

conguring a system with more power-consuming devices. The system

may become unstable or may not boot up if the power is inadequate. Refer

to the Appendix for the certied 500W power supply or above.

• If you are uncertain about the minimum power supply requirement for your

system, refer to the Recommended Power Supply Wattage Calculator

at http://support.asus.com/PowerSupplyCalculator/PSCalculator.

aspx?SLanguage=en-us for details.

2-26 Chapter 2: Hardware information

•

System power LED (2-pin PLED)

This 2-pin connector is for the system power LED. Connect the chassis

power LED cable to this connector. The system power LED lights up when

you turn on the system power, and blinks when the system is in sleep mode.

•

Hard disk drive activity LED (2-pin IDE_LED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity

LED cable to this connector. The IDE LED lights up or ashes when data is

read from or written to the HDD.

•

System warning speaker (4-pin SPEAKER)

This 4-pin connector is for the chassis-mounted system warning speaker. The

speaker allows you to hear system beeps and warnings.

•

ATX power button/soft-off button (2-pin PWRSW)

This connector is for the system power button. Pressing the power button

turns the system on or puts the system in sleep or soft-off mode depending

on the BIOS settings. Pressing the power switch for more than four seconds

while the system is ON turns the system OFF.

•

Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system

reboot without turning off the system power.

10. System panel connector (20-8 pin PANEL)

This connector supports several chassis-mounted functions.

ROG Crosshair V Formula 2-27

11. ASUS Q-Connector (system panel)

Use the ASUS Q-Connector to connect/disconnect the chassis front panel cables.

To install the ASUS Q-Connector:

1. Connect the front panel cables to the

ASUS Q-Connector.

Refer to the labels on the

Q-Connector to know the detailed

pin denitions, and then match them

to their respective front panel cable

labels.

The labels on the front panel

cables may vary depending on the

chassis model.

2. Install the ASUS Q-Connector to the

system panel connector, ensuring

the orientation matches the labels

on the motherboard.

3. The front panel functions are now

enabled. The gure shows the Q-

Connector is properly installed on

the motherboard.

IDE_LED

POWER SW

RESET SW

IDE_LED-

IDE_LED+

PWR

Reset

Ground

2-28 Chapter 2: Hardware information

2.2.9 Onboard switches

Onboard switches allow you to ne-tune performance when working on a bare

or open-case system. This is ideal for overclockers and gamers who continually

change settings to enhance system performance.

1. Power-on switch

Press the power-on switch to wake/power up the system.

2. Reset switch

Press the reset switch to reboot the system.

ROG Crosshair V Formula 2-29

3. GO button

Press the GO button before POST to enable MemOK! or press it to quickly

load the preset prole (GO_Button le) for temporary overclocking when in

OS.

4. ROG Connect switch

Use the ROG Connect switch to enable/disable the ROG Connect fuctions.

2-30 Chapter 2: Hardware information

5. CPU Level Up switch

Use the CPU Level Up switch to overclock immediately with OC prole

presets without the hassle of entering BIOS.

ROG Crosshair V Formula 2-31

2.2.10 ProbeIt

The ROG ProbeIt feature provides a nice touch for your convenient and accurate

OC settings. No time wasted fumbling around on the complicated motherboard

layout, the clearly marked area gives you easier access to the measure points

when a multitester is employed for more accurate measurements during your busy

overclocking work.

Refer to the following illustration for ProbeIt location.

Using ProbeIt

You may connect the multitester to the motherboard as shown on Figure 1, or use

the ProbeIt cable to connect to the motherboard as shown on Figure 2.

The photos above are for reference only, the actual motherboard layout and

measure points location may differ by models.

Figure 1 Figure 2

2-32 Chapter 2: Hardware information

2.3 Building your computer system

2.3.1 Additional tools and components to build a PC system

1 bag of screws Philips (cross) screwdriver

PC chassis Power supply unit

AMD AM3+/AM3 CPU AMD AM3+ compatible CPU Fan

DIMM SATA hard disk drive

SATA optical disc drive (optional) Graphics card

The tools and components in the table above are not included in the

motherboard package.

ROG Crosshair V Formula 2-33

2.3.2 CPU installation

The AM3+ socket has a different pinout from the AM2+/AM2 socket. Ensure

you use a CPU designed for the AM3+ socket. The CPU ts in only one correct

orientation. DO NOT force the CPU into the socket to prevent bending the

connectors on the socket and damaging the CPU!

2-34 Chapter 2: Hardware information

2.3.3 CPU heatsink and fan assembly installation

Apply the Thermal Interface

Material to the CPU heatsink

and CPU before you install the

heatsink and fan if necessary.

ROG Crosshair V Formula 2-35

2.3.3 To install the CPU heatsink and fan assembly

2-36 Chapter 2: Hardware information

ROG Crosshair V Formula 2-37

To remove a DIMM

2.3.4 DIMM installation

2-38 Chapter 2: Hardware information

2.3.5 Motherboard installation

The diagrams in this section are for reference only. The motherboard layout may

vary with models, but the installation steps remain the same.

ROG Crosshair V Formula 2-39

DO NOT overtighten the screws! Doing so can damage the motherboard.

2-40 Chapter 2: Hardware information

2.3.6 ATX Power connection

OR OR

ROG Crosshair V Formula 2-41

2.3.7 SATA device connection

2-42 Chapter 2: Hardware information

2.3.8 Front I/O Connector

IDE_LED

POWER SW

RESET SW

IDE_LED-

IDE_LED+

PWR

Reset

Ground

USB

AAFP

To install ASUS Q-Connector

To install USB Connector To install front panel audio

connector

ROG Crosshair V Formula 2-43

2.3.9 Expension Card installation

To install PCIe x16 cards

To install PCIe x1 cards To install PCI cards

2-44 Chapter 2: Hardware information

2.3.10 ROG ThunderBolt Installation

Combing a dedicated Network Processing Unit (NPU) and a built-in headphone

amplier, ThunderBolt provides you with a best solution to online games, a

maximum game performance and less lag problems.

Installing ThunderBolt

1. Locate the most suitable PCIe x1 or PCIe x16 slot for the ThunderBolt. You

can either install ThunderBolt to the PCIe x1 slot or the PCIe x16 slot.

2. Align the card connector with the slot and press rmly until the card sits on

the slot completely.

ROG Crosshair V Formula 2-45

3. Connect the USB cable to the onboard USB connector.

4. Connect the 4-pin molex power connector to the ThunderBolt.

• Ensure to connect the AAFP cable from the chassis front panel to the

ThunderBolt AAFP connector.

• Install the ThunderBolt on the PCIE x16 slot for a better LAN performance.

• ROG ThunderBolt is only available on selected model.

2-46 Chapter 2: Hardware information

2.3.11 Rear panel connectors

Rear panel connectors

1. PS/2 keyboard/Mouse Combo port 7. External SATA port

2. USB 2.0 ports 1 and 2 8. Optical S/PDIF Out port

3. USB 3.0 ports 3 and 4 9. USB 2.0 ports 3 and 4

4. LAN (RJ-45) port* 10. USB 2.0 ports 5, 6, 7 and 8 (1 port can

be switched to ROG Connect)

5. USB 3.0 ports 1 and 2 11. Audio ports

6. Clear CMOS switch

To use hot-plug, set the Controller Mode in the BIOS settings to [AHCI] mode.

See section 3.5.6 Onboard Devices Conguration for details.

* LAN port LED indications

Activity/Link Speed LED Description

OFF OFF Soft-off Mode

Yellow Blinking OFF 10 Mbps connection or suspend

Yellow Blinking ORANGE 100 Mbps connection

Yellow Blinking GREEN 1 Gbps connection

Speed

LED

Activity/

Link LED

LAN port

ROG Crosshair V Formula 2-47

2.3.12 Audio I/O connections

Connect to Headphone and Mic

Audio 2, 4, 6, or 8-channel conguration

Port Headset

2-channel 4-channel 6-channel 8-channel

Light Blue Line In Line In Line In Line In

Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink Mic In Mic In Mic In Mic In

Orange – – Center/Subwoofer Center/Subwoofer

Black –Rear Speaker Out Rear Speaker Out Rear Speaker Out

Gray – – – Side Speaker Out

Audio I/O ports

2-48 Chapter 2: Hardware information

Connect to 4.1-channel Speakers

Connect to Stereo / 2.1-channel Speakers

Connect to 5.1-channel Speakers

ROG Crosshair V Formula 2-49

Connect to 7.1-channel Speakers

2-50 Chapter 2: Hardware information

2.4 Starting up for the rst time

1. After making all the connections, replace the system case cover.

2. Be sure that all switches are off.

3. Connect the power cord to the power connector at the back of the system

chassis.

4. Connect the power cord to a power outlet that is equipped with a surge

protector.

5. Turn on the devices in the following order:

a. Monitor

b. External SCSI devices (starting with the last device on the chain)

c. System power

6. After applying power, the system power LED on the system front panel case

lights up. For systems with ATX power supplies, the system LED lights up

when you press the ATX power button. If your monitor complies with “green”

standards or if it has a “power standby” feature, the monitor LED may light up

or switch between orange and green after the system LED turns on.

The system then runs the power-on self tests or POST. While the tests are

running, the BIOS beeps (see BIOS beep codes table below) or additional

messages appear on the screen. If you do not see anything within 30

seconds from the time you turned on the power, the system may have failed

a power-on test. Check the jumper settings and connections or call your

retailer for assistance.

BIOS Beep Description

One short beep VGA detected

Quick boot set to disabled

No keyboard detected

One continuous beep followed by two

short beeps then a pause (repeated)

No memory detected

One continuous beep followed by three

short beeps

No VGA detected

One continuous beep followed by four

short beeps

Hardware component failure

7. At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the

instructions in Chapter 3.

ROG Crosshair V Formula 2-51

2.5 Turning off the computer

2.5.1 Using the OS shut down function

If you are using Windows® Vista™/ Windows® 7:

1. Click the Start button then select Shut Down.

2. The power supply should turn off after Windows® shuts down.

If you are using Windows® XP:

1. Click the Start button then select Turn Off Computer.

2. Click the Turn Off button to shut down the computer.

3. The power supply should turn off after Windows® shuts down.

2.5.2 Using the dual function power switch

While the system is ON, pressing the power switch for less than four seconds puts

the system to sleep mode or to soft-off mode, depending on the BIOS setting.

Pressing the power switch for more than four seconds lets the system enter the

soft-off mode regardless of the BIOS setting.

2-52 Chapter 2: Hardware information

BIOS setup

This chapter tells how to change the

system settings through the BIOS Setup

menus. Detailed descriptions of the BIOS

parameters are also provided.

Chapter summary 3

ROG Crosshair V Formula

3.1 Knowing BIOS .............................................................................. 3-1

3.2 BIOS setup program .................................................................... 3-1

3.3 Extreme Tweaker menu ............................................................... 3-5

3.4 Main menuMain menu menu .................................................................................. 3-12

3.5 Advanced menu ......................................................................... 3-15

3.6 Monitor menu ............................................................................. 3-29

3.7 Boot menu .................................................................................. 3-33

3.8 Tools menu ................................................................................. 3-35

3.9 Exit menu .................................................................................... 3-38

3.10 Updating BIOS ............................................................................ 3-39

ROG Crosshair V Formula 3-1

3.1 Knowing BIOS

BIOS (Basic Input and Output System) stores system hardware settings

such as storage device conguration, overclocking settings, advanced power

management, and boot device conguration that are needed for system startup in

the motherboard CMOS. In normal circumstances, the default BIOS settings apply

to most conditions to ensure optimum performance. We recommend that you not

change the default BIOS settings except in the following circumstances:

• An error message appears on the screen during the system bootup and

requests you to run the BIOS Setup.

• You have installed a new system component that requires further BIOS

settings or update.

Inappropriate settings of the BIOS may result to instability or failure to boot. We

strongly recommend that you change the BIOS settings only with the help

of a trained service personnel.

3.2 BIOS setup program

A BIOS setup program is provided for BIOS item modication. When you start up

the computer, the system provides you with the opportunity to run this program.

Press <Del> during the Power-On Self-Test (POST) to enter the Setup utility.

Otherwise, POST continues with its test routines.

If you wish to enter Setup after POST, press <Ctrl> + <Alt> + <Delete>, or press

the reset button on the system chassis to restart the system. You can also turn the

system off and then turn it back on to restart the system. Do this last option only if

the rst two failed.

• The BIOS setup screens shown in this section are for reference purposes

only, and may not exactly match what you see on your screen.

• Ensure that a USB mouse is connected to your motherboard if you want to

use the mouse to control the BIOS setup program.

• If the system becomes unstable after changing any BIOS setting, load the

default settings to ensure system compatibility and stability. Select the Load

Optimized Defaults item under the Exit menu. See section 3.9 Exit Menu for

details.

• If the system fails to boot after changing any BIOS setting, try to clear the

CMOS and reset the motherboard to the default value. See section 2.3.11

Rear panel connectors for information on how to erase the RTC RAM.

The BIOS setup program is designed to make it as easy to use as possible. Being

a menu-driven program, it lets you scroll through the various submenus and select

from the available options using a keyboard or a USB mouse.

The BIOS setup program can be used under two modes: EZ Mode and Advanced

Mode. You can change modes from the Exit menu or from the Exit/Advanced

Mode button in the EZ Mode/Advanced Mode screen.

3-2 Chapter 3: BIOS setup

3.2.1 EZ Mode

The EZ Mode provides you an overview of the basic system information, and

allows you to select the display language, system performance mode and boot

device priority. To access the Advanced Mode, click Exit/Advanced Mode, then

select Advanced Mode.

The default screen for entering the BIOS setup program can be changed. Refer

to the Setup Mode item in sectionsection 3.7 Boot memu for details.

Exits the BIOS setup program without saving

the changes, saves the changes and resets

the system, or enters the Advanced Mode

Selects the display language

of the BIOS setup program

Displays the CPU/motherboard

temperature, CPU/5V/3.3V/12V voltage

output, CPU/chassis/power fan speed

Power Saving mode

Normal mode ASUS Optimal

mode

Loads optimized default

Selects the boot device priority

• The boot device options vary depending on the devices you installed to the

system.

• The Boot Menu(F8) button is available only when the boot device is

installed to the system.

Displays the system properties of

the selected mode on the right hand

side

Clicks to display all fan

speeds if available

ROG Crosshair V Formula 3-3

3.2.2 Advanced Mode

By default, the Advanced Mode appears when you enter the BIOS setup program.

The Advanced Mode provides advanced options for experienced end-users to

congure the BIOS settings. The gure below shows an example of the Advanced

Mode. Refer to the following sections for the detailed congurations.

To access the EZ Mode, click Exit, then select ASUS EZ Mode.

Menu bar

The menu bar on top of the screen has the following main items:

Extreme Tweaker For changing the overclocking settings

Main For changing the basic system conguration

Advanced For changing the advanced system settings

Monitor For displaying the system temperature, power status, and changing

the fan settings.

Boot For changing the system boot conguration

Tool For conguring options for special functions

Exit For selecting the exit options and loading default settings

Navigation keys

General

help

Menu bar

Submenu item

Conguration

elds

items

Scroll bar

Pop-up window

3-4 Chapter 3: BIOS setup

Menu items

The highlighted item on the menu bar displays the specic items for that menu. For

example, selecting Main shows the Main menu items.

The other items (Extreme Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the

menu bar have their respective menu items.

Back button

This button appears when entering a submenu. Press <Esc> or use the USB

mouse to click this button to return to the previous menu screen.

Submenu items

A greater than sign (>) before each item on any menu screen means that the item

has a submenu. To display the submenu, select the item and press <Enter>.

Pop-up window

Select a menu item and press <Enter> to display a pop-up window with the

conguration options for that item.

Scroll bar

A scroll bar appears on the right side of a menu screen when there are items that

do not t on the screen. Press the Up/Down arrow keys or <Page Up> / <Page

Down> keys to display the other items on the screen.

Navigation keys

At the bottom right corner of the menu screen are the navigation keys for the

BIOS setup program. Use the navigation keys to select items in the menu and

change the settings. Use <F12> key to capture the BIOS screen and save it to theUse <F12> key to capture the BIOS screen and save it to the

removable storage device.

General help

At the top right corner of the menu screen is a brief description of the selected

item.

Conguration elds

These elds show the values for the menu items. If an item is user-congurable,

you can change the value of the eld opposite the item. You cannot select an item

that is not user-congurable.

A congurable eld is highlighted when selected. To change the value of a eld,

select it and press <Enter> to display a list of options.

ROG Crosshair V Formula 3-5

3.3 Extreme Tweaker menu

The Extreme Tweaker menu items allow you to congure overclocking-related

items.

Be cautious when changing the settings of the Extreme Tweaker menu items.

Incorrect eld values can cause the system to malfunction.

The conguration options for this section vary depending on the CPU and DIMM

model you installed on the motherboard.

Scroll down to display the following items:

3-6 Chapter 3: BIOS setup

Scroll down to display the following items:

Ai Overclock Tuner [Auto]

Allows you to select the CPU overclocking options to achieve the desired CPU

internal frequency. Select any of these preset overclocking conguration options:

[Auto] Loads the optimal settings for the system.

[Manual] Allows you to individually set overclocking parameters.

[D.O.C.P.] Allows you to select a DRAM overclocking prole.

OC Tuner [CANCEL]

OC Tuner automatically overclocks the frequency and voltage of CPU and DRAM.

Conguration options: [CANCEL] [OK]

CPU Ratio [Auto]

Allows you to manually adjust the maximum non-CPB CPU ratio. Use <+> and

<-> keys to adjust the value. The valid value ranges vary according to your CPU

model.

Memory Frequency [Auto]

Allows you to set the memory operating frequency. Conguration options: [DDR3-

800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-1600MHz]

Selecting a very high memory frequency may cause the system to become

unstable! If this happens, revert to the default setting.

CPU/NB Frequency [Auto]

Sets the ratio between northbridge (in CPU) Clock and the CPU Bus frequency.

Conguration options: [Auto] [1400MHz] [1600MHz] [1800MHz] [2000MHz]

[2200MHz] [2400MHz] [2600MHz] [2800MHz] [3000MHz] [3200MHz]

ROG Crosshair V Formula 3-7

HT Link Speed [Auto]

Allows you to set the HyperTransport link speed.

Conguration options: [Auto] [800MHz] [1000MHz] [1200MHz] [1400MHz]

[1600MHz] [1800MHz] [2000MHz]

CPU Spread Spectrum [Auto]

[Auto] Automatic conguration.

[Disabled] Enhances the BCLK overclocking ability.

[Enabled] Sets to [Enabled] for EMI control.

PCIe Spread Spectrum [Auto]

[Auto] Automatic conguration.

[Disabled] Enhances the PCIE overclocking ability.

[Enabled] Sets to [Enabled] for EMI control.

EPU Power Saving Mode [Disabled]

Allows you to enable or disable the EPU power saving function.

Conguration options: [Disabled] [Enabled]

DRAM Timing Control

The sub-items in this menu allow you to set the DRAM timing control features. Use

the <+> and <-> keys to adjust the value. To restore the default setting, type [auto]

using the keyboard and press the <Enter> key.

Changing the values in this menu may cause the system to become unstable! If

this happens, revert to the default settings.

DRAM Driving Control

DCT0 Information:

CKE drive strength [Auto]

Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]

CS/ODT drive strength [Auto]

Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]

ADDR/CMD drive strength [Auto]

Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]

MEMCLK drive strength [Auto]

Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]

Data drive strength [Auto]

Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]

DQS drive strength [Auto]

Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]

3-8 Chapter 3: BIOS setup

Processor ODT [Auto]

Conguration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60

ohms +/- 20%]

DCT1 Information:

CKE drive strength [Auto]

Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]

CS/ODT drive strength [Auto]

Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]

ADDR/CMD drive strength [Auto]

Conguration options: [Auto] [1x] [1.25x] [1.5x] [2x]

MEMCLK drive strength [Auto]

Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]

Data drive strength [Auto]

Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]

DQS drive strength [Auto]

Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]

Processor ODT [Auto]

Conguration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60

ohms +/- 20%]

GPU.DIMM Post

The sub-items in this menu display the status of the installed VGA cards and

memory. The eld shows N/A if there’s no device installed on that slot.

DIGI + VRM/Power Control

CPU Load-line Calibration [Auto]

Load-line is dened by AMD CPU spec and affects CPU voltage. The CPU working

voltage will decrease proportionally to CPU loading. Higher Load-line calibration

would get higher voltage and better overclocking performance, but increase the

CPU and VRM thermal. This item allows you to adjust the voltage range from

the following percentages to boost the system performance: 0% (Regular), 25%

(Medium), 50% (High), 75% (Ultra High) and 100% (Extreme).

Conguration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]

The actual performance boost may vary depending on your CPU speciation.

CPU/NB Load Line Calibration [Auto]

Allows you to select the CPU/NB Load-Line mode.

Conguration options: [Auto] [Regular] [High] [Extreme]

ROG Crosshair V Formula 3-9

CPU Voltage Over-Current Protection [Auto]

This item provides wider total power range for overclocking. A higher value

brings a wider total power range and extends the overclocking frequency range

simultaneously.

Conguration options: [Auto] [100%] [110%] [120%] [130%] [140%] [Disabled]

Do not remove the thermal module while changing the DIGI+ VRM related

parrameters . The thermal conditions should be monitored.

Some of the following items are adjusted by typing the desired values using

the numeric keypad and press the <Enter> key. You can also use the <+> and

<-> keys to adjust the value. To restore the default setting, type [auto] using the

keyboard and press the <Enter> key.

CPU/NB Over-Current Protection [Auto]

This item provides wider total power range for overclocking. A higher value

brings a wider total power range and extends the overclocking frequency range

simultaneously.

Conguration options: [Auto] [100%] [110%] [120%] [130%]

CPU PWM Phase Control [Extreme]

Phase number is the number of woorking VRM phase. Increasing phase number

under heavy system loading to get more transient and better thermal performance.

Reducing phase number under light system loading to increase VRM efciency

[Standard] Proceeds phase control depending on the CPU loading.

[Optimized] Loads the ASUS optimized phase tuning prole.

[Extreme] Proceeds the full phase mode.

[Manual Adjustment] Allows manual adjustment

VRM Over Temperature Protection [Enabled]

CPU Voltage Frequency [Auto]

Allows you to select the CPU Voltage Frequency.

Conguration options: [Auto] [Manual]

VRM Fixed Frequency Mode [300]

This item appears only when you set the CPU Voltage Frequency item to

[Manual] and allows you to set a xed VRM frequency. Use the <+> and <->

keys to adjust the value. The values range from 300k Hz to 500k Hz with a

10k Hz interval.

CPU PWM mode [Extreme]

[T.Probe] Maintains the VRM thermal balance.

[Extreme] Maintains the VRM current balance.

3-10 Chapter 3: BIOS setup

Extreme OV [Disabled]

[Enabled] Enables the Extreme OV function.

[Disabled] Disables this function.

CPU & CPU/NB Voltage mode [Manual Mode]

[Manual Mode] Allows you to set a xed CPU voltage.

[Offset Mode] Allows you to set the Offset voltage.

CPU Manual Voltage [Auto]

This item appears only when you set the CPU & NB Voltage item to [Manual

Mode] and allows you to set a xed CPU voltage. The values range depends

on your CPU.

CPU/NB Manual Voltage [Auto]

This item appears only when you set the CPU & NB Voltage item to [Manual

Mode] and allows you to set a xed CPU/NB voltage. The values range

depends on your CPU.

Refer to the CPU documentation before setting the CPU voltage. Setting a

high voltage may damage the CPU permanently, and setting a low voltage may

make the system unstable.

CPU VDDA Voltage [Auto]

Allows you to set the CPU VDDA voltage. The values range from 2.20000V

to 3.18750V with a 0.00625V interval. The text color in the conguration eld

indicates voltage condition.

DRAM Voltage [Auto]

Allows you to set the DRAM voltage. The values range from 1.20V to 2.90V with a

0.00625V interval.

According to CPU spec, DIMMs with voltage requirement over 1.65V may

damage the CPU permanently. We recommend you install the DIMMs with the

voltage requirement below 1.65V.

VDDR [Auto]

Allows you to set the VDDR voltage. The values range from 1.20575V to 1.80200V

with a 0.01325V interval.

DRAM VREFDQ [Auto]

Allows you to set the DRAM VREFDQ Voltage. The values range from 0.5900V to

0.9750V with a 0.0025V interval.

DRAM VREFCA [Auto]

Allows you to set the DRAM VREFCA Voltage. The values range from 0.5900V to

0.9750V with a 0.0025V interval.

ROG Crosshair V Formula 3-11

DRAM VREFCA on CPU [Auto]

Allows you to set the DRAM VREFCA on CPU Voltage. The values range from

0.5900V to 0.9750V with a 0.0025V interval.

DRAM Voltage Switching Frequency [Auto]

Allows you to switch DRAM voltage frequency. Conguration options: [Auto] [1] [2x]

DRAM Voltage Over-Current Protection [Auto]

Conguration options: [Enabled] [Disabled]

NB Voltage [Auto]

Allows you to set the North Bridge voltage. The values range from 0.80000V to

2.00000V with a 0.00625V interval.

NB HT Voltage [Auto]

Allows you to set the NB HT voltage. The values range from 0.80000V to 2.00000V

with a 0.00625V interval.

NB 1.8V Voltage [Auto]

Allows you to set the NB 1.8V voltage. The values range from 1.80200V to

3.00775V with a 0.01325V interval.

VDD PCIE [Auto]

Allows you to set the VDD PCIE voltage. The values range from 1.11300V

to 2.00075V with a 0.01325V interval. The text color in the conguration eld

indicates voltage condition.

SB Voltage [Auto]

Allows you to set the SB voltage. The values range from 1.11300V to 1.80200V

with a 0.01325V interval.

NB Voltage Switching Frequency [Auto]

Allows you to switch NB voltage frequency. Conguration options: [Auto] [1] [2x]

NB 1.8V Switching Frequency [Auto]

Allows you to switch NB 1.8V voltage frequency. Conguration options: [Auto] [1]

[2x]

VDD PCIE Switching Frequency [Auto]

Allows you to switch VDD PCIE voltage frequency. Conguration options: [Auto]

[1] [2x]

3-12 Chapter 3: BIOS setup

3.4 Main menu

The Main menu screen appears when you enter the Advanced Mode of the BIOS

Setup program. The Main menu provides you an overview of the basic system

information, and allows you to set the system date, time, language, and security

settings.

3.4.1 System Language [English]

Allows you to choose the BIOS language version from the options. Conguration

options: [English]

3.4.2 System Date [Day xx/xx/xxxx]

Allows you to set the system date.

3.4.3 System Time [xx:xx:xx]

Allows you to set the system time.

ROG Crosshair V Formula 3-13

3.4.4 Security

The Security menu items allow you to change the system security settings.

• If you have forgotten your BIOS password, erase the CMOS Real Time

Clock (RTC) RAM to clear the BIOS password. See section 2.3.11 Rear

panel connectors for information on how to erase the RTC RAM.

• The Administrator or User Password items on top of the screen show

the default Not Installed. After you set a password, these items show

Installed.

Administrator Password

If you have set an administrator password, we recommend that you enter the

administrator password for accessing the system. Otherwise, you might be able to

see or change only selected elds in the BIOS setup program.

To set an administrator password:

1. Select the Administrator Password item and press <Enter>.

2. From the Create New Password box, key in a password, then press

<Enter>.

3. Conrm the password when prompted.

3-14 Chapter 3: BIOS setup

To change an administrator password:

1. Select the Administrator Password item and press <Enter>.

2. From the Enter Current Password box, key in the current password, then

press <Enter>.

3. From the Create New Password box, key in a new password, then press

<Enter>.

4. Conrm the password when prompted.

To clear the administrator password, follow the same steps as in changing an

administrator password, but press <Enter> when prompted to create/conrm the

password. After you clear the password, the Administrator Password item on top

of the screen shows Not Installed.

User Password

If you have set a user password, you must enter the user password for accessing

the system. The User Password item on top of the screen shows the default Not

Installed. After you set a password, this item shows Installed.

To set a user password:

1. Select the User Password item and press <Enter>.

2. From the Create New Password box, key in a password, then press

<Enter>.

3. Conrm the password when prompted.

To change a user password:

1. Select the User Password item and press <Enter>.

2. From the Enter Current Password box, key in the current password, then

press <Enter>.

3. From the Create New Password box, key in a new password, then press

<Enter>.

4. Conrm the password when prompted.

To clear the user password, follow the same steps as in changing a user password,

but press <Enter> when prompted to create/conrm the password. After you clear

the password, the User Password item on top of the screen shows Not Installed.

ROG Crosshair V Formula 3-15

Be cautious when changing the settings of the Advanced menu items. Incorrect

eld values can cause the system to malfunction.

3.5 Advanced menu

The Advanced menu items allow you to change the settings for the CPU and other

system devices.

3-16 Chapter 3: BIOS setup

3.5.1 CPU Conguration

The items in this menu show the CPU-related information that the BIOS

automatically detects.

The items shown in this screen may be different due to the CPU you installed.

Cool‘n’Quiet [Disabled]

[Enabled] Enables the AMD Cool’n’Quiet function.

[Disabled] Disables this function.

C1E [Disabled]

[Enabled] Enables the C1E support function. This item should be enabled in

order to enable the Enhanced Halt Sate.

[Disabled] Disables this function.

SVM [Enabled]

[Enabled] Enables AMD virtualization in CPU. This secure virtual mode will let

you run multiple operation system on the same physical hardware

by decoupling operation system and physical hardware with the

hypervisor layer.

[Disabled] Disables this function.

ROG Crosshair V Formula 3-17

3.5.2 North Bridge Conguration

IOMMU [Disabled]

Conguration options: [Disabled] [64MB]

Memory Conguration

Bank Interleaving [Auto]

Allows you to enable Memory Bank Interleaving fuction. Conguration

options: [Auto] [Disabled]

Channel Interleaving [Auto]

Allows you to enable Memory Channel Interleaving fuction. Conguration

options: [Auto] [Disabled]

ECC Mode [Disabled]

Allows you to enable or disable the ECC Mode.

Conguration options: [Enabled] [Disabled]

Power Down Enable [Disabled]

Allows you to enable or disable DDR power down mode.

Conguration options: [Enabled] [Disabled]

Memory Hole Remapping [Enabled]

Allows you to enable or disable Memory Hole Remapping fuction.

Conguration options: [Enabled] [Disabled]

DCT Unganged Mode [Enabled]

Allows you to select unganged DRAM mode (64-bit width).

[Enabled]: Unganged mode.

[Disabled]: Ganged mode.

Initiate Graphic Adapter [PEG/PCI]

Allows you to decide which graphics controller to use as the primary boot device.

Conguration options: [PCI/PEG] [PEG/PCI]

Socket 0 Information

View information related to Socket 0.

3-18 Chapter 3: BIOS setup

3.5.3 SATA Conguration

While entering Setup, the BIOS automatically detects the presence of SATA devices.

The SATA Port items show Not Present if no SATA device is installed to the

corresponding SATA port.

Onchip SATA Channel [Enabled]

Conguration options: [Disabled] [Disabled]

SATA Port1-Port4 [AHCI]

Allows you to set the SATA conguration. This item appears only when you set the

OnChip SATA Channel item to [Enabled].

[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[RAID] Set to [RAID] when you want to create a RAID conguration from the

SATA hard disk drives.

[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the

AHCI (Advanced Host Controller Interface). The AHCI allows the

onboard storage driver to enable advanced Serial ATA features that

increases storage performance on random workloads by allowing the

drive to internally optimize the order of commands.

ROG Crosshair V Formula 3-19

SATA Port5-Port6 [AHCI]

Allows you to set the SATA conguration. This item appears only when you set the

OnChip SATA Channel item to [Enabled].

[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives

as Parallel ATA physical storage devices.

[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the

AHCI (Advanced Host Controller Interface). The AHCI allows the

onboard storage driver to enable advanced Serial ATA features

that increases storage performance on random workloads by

allowing the drive to internally optimize the order of commands.

You can only set SATA Port5-Port6 to [IDE] if Port1-Port4 is set to [IDE]

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor

system. When read/write of your hard disk errors occur, this feature allows the hard

disk to report warning messages during the POST.

Conguration options: [Disabled] [Enabled]

SATA Hot Plug on PORT1-6 [Disabled]

Allows you to set SATA Hot Plug on PORT1-6 to external SATA port.

Conguration options: [Disabled] [Enabled]

3-20 Chapter 3: BIOS setup

3.5.4 USB Conguration

The items in this menu allow you to change the USB-related features.

The USB Devices item shows the auto-detected values. If no USB device is

detected, the item shows None.

Legacy USB Support [Enabled]

[Disabled] Disables the function.

[Enabled] Enables the support for USB devices on legacy operating systems

(OS).

[Auto] Allows the system to detect the presence of USB devices at

startup. If detected, the USB controller legacy mode is enabled. If

no USB device is detected, the legacy USB support is disabled.

Legacy USB3.0 Support [Enabled]

[Enabled] Enables the support for USB 3.0 devices on legacy operating

systems (OS).

[Disabled] Disables the function.

EHCI Hand-off [Disabled]

[Disabled] Disables the function.

[Enabled] Enables the support for operating systems without an EHCI

hand-off feature.

ROG Crosshair V Formula 3-21

SB USB Conguration

The sub-items in this menu allow you to set the SB USB Conguration.

OHCI HC (Bus 0 Dev 18 Fn 0) [Enabled]

Enable or disable OHCI USB1.1 Controller. Conguration options: [Disabled]

[Enabled]

OHCI HC (Bus 0 Dev 19 Fn 0) [Enabled]

Enable or disable OHCI USB1.1 Controller. Conguration options: [Disabled]

[Enabled]

OHCI HC (Bus 0 Dev 22 Fn 0) [Enabled]

Enable or disable OHCI USB1.1 Controller. Conguration options: [Disabled]

[Enabled]

OHCI HC (Bus 0 Dev 20 Fn 5) [Enabled]

Enable or disable OHCI USB1.1 Controller. Conguration options: [Disabled]

[Enabled]

USB PORT 0-13 [Enabled]

Enable or disable USB port 0-13. Conguration options: [Disabled] [Enabled]

USB PORT FL0-FL1 [Enabled]

Enable or disable USB port FL0-FL1. Conguration options: [Disabled]

[Enabled]

USB Device Wakeup From S3 or S4 [Enabled]

Enable or disable USB Device Wakeup From S3 or S4 funtion. Conguration

options: [Disabled] [Enabled]

3-22 Chapter 3: BIOS setup

3.5.5 CPU Core On/ Off Function

ASUS Core Unlocker [Disabled]

Allows you to enable ASUS Core Unlocker to get full computing power of

processor.Conguration options: [Disabled] [Enabled]

System might become unstable due to different CPU margins.

CPU Core Activation [Auto]

Allows you to manually turn off the second or the third core.

Conguration options: [Auto] [Manual]

ROG Crosshair V Formula 3-23

3.5.6 Onboard Devices Conguration

ASM1061 Storage Controller [ACHI Mode]

Allows you to select the ASM1061 storage controller operating mode.

[Disabled] Disables the controller.

[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives

as Parallel ATA physical storage devices.

[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the

AHCI (Advanced Host Controller Interface). The AHCI allows the

onboard storage driver to enable advanced Serial ATA features that

increases storage performance on random workloads by allowing

the drive to internally optimize the order of commands.

ASM1061 Storage OPROM [Enabled]

This item appears only when you set the previous item to [Enabled] and allows you

to enable or disable the OptionRom of the ASM1061 storage controller.

Conguration options: [Enabled] [Disabled]

Asmedia USB 3.0 Controller [Enabled]

[Enabled] Enables the Asmedia USB 3.0 Controller.

[Disabled] Disables the controller.

3-24 Chapter 3: BIOS setup

Asmedia USB 3.0 Battery Charging Support [Disabled]

[Enabled] Enables the Asmedia USB 3.0 Battery Charging Support fuction.

[Disabled] Disables the fuction.

Intel 82583 LAN [Enabled]

[Enabled] Enables the Intel 82583 LAN controller.

[Disabled] Disables the controller.

Launch PXE OPROM [Disabled]

This item appears only when you set the previous item to [Enabled] and allows you

to enable or disable boot option for PXE OPROM.

Conguration options: [Enabled] [Disabled]

SB HD Azalia Conguration

HD Audio Azalia Device [Enabled]

[Enabled] Enables the HD Audio Device.

[Disabled] Disables the controller.

Azalia Front Panel [HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or

high-denition audio depending on the audio standard that the front panel audio

module supports.

[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97

[HD] Sets the front panel audio connector (AAFP) mode to high

denition audio.

SPDIF Out Type [SPDIF]

[SPDIF] Sets to [SPDIF] for SPDIF audio output.

[HDMI] Sets to [HDMI] for HDMI audio output.

ROG Crosshair V Formula 3-25

ErP Ready [Disabled]

[Disabled] Disables the Energy Using Products (EuP) Ready function.

[Enabled] Allows BIOS to switch off some power at S5 state to get system

ready for the EuP requirement. When set to [Enabled], power for

WOL, WO_USB, audio and onboard LEDs will be switched off at

S5 state.

Restore AC Power Loss [Power Off]

[Power On] The system goes into on state after an AC power loss.

[Power Off] The system goes into off state after an AC power loss.

[Last State] The system goes into either off or on state, whatever the system

state was before the AC power loss.

Power On By PS/2 Device [Disabled]

[Disabled] Disables the Power On by a PS/2 device.

[Enabled] Enables the Power On by a PS/2 device. This feature requires an

ATX power supply that provides at least 1A on the +5VSB lead.

Power On By PME [Disabled]

[Disabled] Disables the PME devices to generate a wake event.

[Enabled] Enables the PME devices to generate a wake event.

Power On By RTC [Disabled]

[Disabled] Disables RTC to generate a wake event.

[Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and

Hour/Minute/Second will become user-congurable with set values.

3.5.7 APM

3-26 Chapter 3: BIOS setup

3.5.8 iROG Conguration

iROG Timer Keeper [Last State]

Allows you to set the iROG Time Keeper operation mode.

Conguration options: [Last State] [Disabled] [Enabled]

3.5.9 ROG Connect

ROG Connect [Enabled]

Allows you to enable or disable the ROG Connect function.

Conguration options: [Enabled] [Disabled]

RC Poster Mode [String]

RC Poster describes what occurs during the POST.

Conguration options: [String] [Code]

ROG Crosshair V Formula 3-27

3.5.10 LED Control

The LED Control menu items allow you to change the advanced settings for the

onboard LEDs.

Take caution when changing the settings of the LED Control menu items.

Incorrect eld values can cause the system to malfunction.

The following items appear only when you set All LED Control to [Enabled].

ROG Logo [Enabled]

Allows you to enable or disable the onboard ROG logo LED.

Conguration options: [Enabled] [Disabled]

Voltiminder LED [Enabled]

Allows you to enable or disable the onboard Voltiminder LED.

Conguration options: [Enabled] [Disabled]

CPU LED Selection [CPU]

Allows you to switch the onboard CPU LED display between CPU voltage [CPU],

CPU/NB voltage [CPU/NB], and CPU VDDA [CPU VDDA]. Conguration options:

[CPU] [CPU/NB] [CPU VDDA]

All LED Control [Enabled]

Allows you to enable or disable the onboard LEDs control.

Conguration options: [Enabled] [Disabled]

3-28 Chapter 3: BIOS setup

NB LED Selection [NB]

Allows you to switch the onboard NB LED display between NB voltage [NB], NB

1.8V [NB 1.8V], and VDDPCIE voltage [VDDPCIE].

Conguration options: [NB] [NB 1.8V] [VDDPCIE]

SB LED Selection [SB]

Allows you to switch the onboard SB LED display between SB voltage [NB] and HT

voltage [HT]. Conguration options: [SB] [HT]

DDR LED Selection [DDR]

Allows you to switch the onboard DDR LED display between DDR voltage [DDR]

and VDDR voltage [VDDR]. Conguration options: [DDR] [VDDR]

ROG Crosshair V Formula 3-29

3.6 Monitor menu

The Monitor menu displays the system temperature/power status, and allows you

to change the fan settings.

Voltage Monitor

Vcore Voltage; 3.3V Voltage; 5V Voltage; 12V Voltage; VDDA2.5V Voltage;

CPU/NB Voltage; DRAM Voltage; HT Voltage; NB Voltage;

SB Voltage [xxxV]

The onboard hardware monitor automatically detects the voltage output

through the onboard voltage regulators.

Temperature Monitor

CPU Temperature; MB Temperature; NB Temperature; SB Temperature;

OPT1/2/3 Temperature[xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the CPU,

motherboard, and the assigned devices temperatures. Select [Ignored] if you

do not wish to display the detected temperatures.

NB Overheat Protection [90ºC]

The system automatically shuts down when the NB is heated over the set

temperature to protect it from damage.

Conguration options: [Disabled] [70ºC] [80ºC] [90ºC] [100ºC]

3-30 Chapter 3: BIOS setup

SB Overheat Protection [90ºC]

The system automatically shuts down when the SB is heated over the set

temperature to protect it from damage.

Conguration options: [Disabled] [70ºC] [80ºC] [90ºC] [100ºC]

OPT TEMP1/2/3 Overheat Protection [90ºC]

Allows you to set the temperature over which the system automatically shuts

down when any of the thermal sensor cables connected to the motherboard

detects device overheat to protect the device from damage.

Conguration options: [Disabled] [70ºC] [80ºC] [90ºC] [100ºC]

Fan Speed Monitor

CPU FAN; CPU Opt FAN; Chassis FAN1/2/3 Speed;

Opt 1/2/3 FAN Speed [xxxxRPM] or [N/A]

The onboard hardware monitor automatically detects and displays the CPU

fan, chassis fan, power fan, and optional fan speed in rotations per minute

(RPM). If any of the fans is not connected to the motherboard, the eld shows

[N/A]. These items are not user-congurable.

Fan Speed Control

CPU Q-Fan Control [Disabled]

Allows you to enable or disable the CPU fan controller.

[Disabled] Disables the CPU Q-fan controller.

[Enabled] Enables the CPU Q-fan controller.

The following items appear when you enable the CPU Fan Control feature.

Select Fan Type [PWM Fan]

Conguration options: [PWM Fan] [DC Fan]

CPU Fan Profile [Standard]

Allows you to set the appropriate performance level of the CPU fan.

[Standard] Sets to [Standard] to make the chassis fan automatically adjust

depending on the CPU temperature.

[Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan

operation.

[Turbo] Set to [Turbo] to achieve maximum CPU fan speed.

[Manual] Sets to [Manual] to display more items for you to manually

adjust the CPU upper/lower temperature, and CPU fan upper/

lower duty cycle.

The following four items appear only when you set CPU Fan Prole to [Manual].

ROG Crosshair V Formula 3-31

CPU Upper Temperature [70]

Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The

values range from 20ºC to 75ºC.

CPU Lower Temperature [20]

Displays the lower limit of the CPU temperature.

CPU Fan Max. Duty Cycle(%) [20]

Use the <+> and <-> keys to adjust the Maximum CPU fan duty cycle. The values

range from 20% to 100%. When the CPU temperature reaches upper limit, the CPU

fan will operate at the maximum duty cycle.

CPU Fan Min. Duty Cycle(%) [20]

Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values

range from 20% to 100%. When the CPU temperature is under 40ºC, the CPU fan

will operate at the minimum duty cycle.

CPU Fan Speed Low Limit [600 RPM]

Allows you to set the low speed limit of the CPU fan and the system sends

warning message when the fan speed drops below the set value.

Conguration options: [Ignored] [100 RPM] [200 RPM] [300 RPM] [400 RPM]

[500 RPM] [600 RPM]

Chassis Q-Fan Control [Disabled]

[Disabled] Disables the Chassis Q-Fan control feature.

[Enabled] Enables the Chassis Q-Fan control feature.

Chassis Fan Profile [Standard]

This item appears only when you enable the Chassis Q-Fan Control feature

and allows you to set the appropriate performance level of the chassis fan.

[Standard] Sets to [Standard] to make the chassis fan automatically adjust

depending on the chassis temperature.

[Silent] Sets to [Silent] to minimize the fan speed for quiet chassis fan

operation.

[Turbo] Sets to [Turbo] to achieve maximum chassis fan speed.

[Manual] Sets to [Manual] to assign detailed fan speed control parameters.

The following four items appear only when you set Chassis Fan Prole to

[Manual].

Chassis Upper Temperature [70]

Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The

values range from 40ºC to 90ºC.

Chassis Lower Temperature [40]

Displays the lower limit of the chassis temperature.

Chassis Fan Max. Duty Cycle(%) [60]

Use the <+> and <-> keys to adjust the maximum chassis fan duty cycle. The values

range from 60% to 100%. When the chassis temperature reaches upper limit, the

chassis fan will operate at the maximum duty cycle.

3-32 Chapter 3: BIOS setup

Chassis Fan Min. Duty Cycle(%) [60]

Use the <+> and <-> keys to adjust the minimum chassis fan duty cycle. The values

range from 60% to 100%. When the chassis temperature is under 40ºC, the chassis

fan will operate at the minimum duty cycle.

Chassis Fan Speed Low Limit [600 RPM]

This item appears only when you enable the Chassis Q-Fan Control feature and

allows you to disable or set the chassis fan warning speed.

Conguration options: [Ignore] [100 RPM] [200 RPM] [300 RPM] [400 RPM] [500

RPM] [600 RPM]

OPTFAN 1/2/3 Control [Disabled]

Allows you to select the optional fan control mode. When this item is set to [Duty

Mode], you can congure the OPT Fan1/2/3 Duty item. If you set this item to [User

Mode], you are allowed to congure the OPT Fan1/2/3 Low Speed Temp and

OPT Fan1/2/3 Full Speed Temp item.

Conguration options: [Disabled] [Duty Mode] [User Mode]

OPTFAN 1/2/3 Low Speed Temp [25˚C]

Allows you to set the temperature at which the power fan rotates at low speed.

This item appears when the OPTFAN1/2/3 Control item is set to [User Mode].

Conguration options: [25˚C] [30˚C] [35˚C] [40˚C]

OPTFAN 1/2/3 Full Speed Temp [60˚C]

Allows you to set the temperature at which the power fan rotates at full speed.

This item appears when the OPTFAN1/2/3 Control item is set to [User Mode].

Conguration options: [60˚C] [70˚C] [80˚C] [90˚C]

ROG Crosshair V Formula 3-33

3.7 Boot menu

The Boot menu items allow you to change the system boot options.

3-34 Chapter 3: BIOS setup

Bootup NumLock State [On]

[On] Sets the power-on state of the NumLock to [On].

[Off] Sets the power-on state of the NumLock to [Off].

Full Screen Logo [Enabled]

[Enabled] Enables the full screen logo display feature.

[Disabled] Disables the full screen logo display feature.

Set this item to [Enabled] to use the ASUS MyLogo 3™ feature.

Option ROM Messages [Force BIOS]

[Force BIOS] The third-party ROM messages will be forced to display during the

boot sequence.

[Keep Current] The third-party ROM messages will be displayed only if the third-

party manufacturer had set the add-on device to do so.

Interrupt 19 Capture [Disabled]

[Enabled]: Allows option ROMs to trap Int 19.

[Disabled]: Stops option ROMs to trap Int 19.

Setup Mode [Advanced Mode]

[Advanced Mode] Sets Advanced Mode as the default screen for entering the

BIOS setup program.

[EZ Mode] Sets EZ Mode as the default screen for entering the BIOS setup

program.

Wait for ‘F1’ If Error [Enabled]

When set to [Enabled], the system waits for the <F1> key to be pressed when error

occurs.

Boot Option Priorities

These items specify the boot device priority sequence from the available devices.

The number of device items that appears on the screen depends on the number of

devices installed in the system.

• To select the boot device during system startup, press <F8> when ASUS

Logo appears.

• To access Windows OS in Safe Mode, do any of the following:

- Press <F8> after POST.

Boot Override

These items displays the available devices. The number of device items that

appears on the screen depends on the number of devices installed in the system.

Click an item to start booting from the selected device.

ROG Crosshair V Formula 3-35

3.8 Tools menu

The Tools menu items allow you to congure options for special functions. Select

an item then press <Enter> to display the submenu.

3.8.1 ASUS EZ Flash 2 Utility

Allows you to run ASUS EZ Flash 2 Utility. When you press <Enter> to start the

application.

For more details, refer to section 3.10.2 ASUS EZ Flash 2 Utility.

3.8.2 ASUS SPD Information

Allows you to get DRAM SPD information.

3-36 Chapter 3: BIOS setup

3.8.3 ASUS O.C. Prole

This item allows you to store or load multiple BIOS settings.

Add Your CMOS Prole

Allows you to save the current BIOS le to the BIOS Flash. In the Label sub-item,

type your prole name and press <Enter>, and then choose a prole number to

save your CMOS settings in the Save to Prole sub-item.

Load CMOS Proles

Allows you to load the previous BIOS settings saved in the BIOS Flash. Press

<Enter>, and choose a prole to load.

ROG Crosshair V Formula 3-37

3.8.4 GO Button File

This menu allows you to set the GO Button les, and load the desired GO Button

le.

Scroll down to display the following items:

CPU Bus/PEG Frequency; PCIE Frequency; CPU Ratio; CPU Voltage;

CPU/NB Voltage; CPU VDDA Voltage; DRAM Voltage; NB Voltage; NB

HT Voltage; NB 1.8V Voltage; SB Voltage; VDD PCIE; VDDR

Allows you to use the <+> and <-> keys to adjust the values for each item. Refer to

3.3 Extreme Tweaker Menu for details.

Load Default

Allows you to load default settings.

Save Above Settings

Allows you to save the adjusted values for specic items as a GO Button le.

3-38 Chapter 3: BIOS setup

3.9 Exit menu

The Exit menu items allow you to load the optimal default values for the BIOS

items, and save or discard your changes to the BIOS items. You can access the

EZ Mode from the Exit menu.

Load Optimized Defaults

This option allows you to load the default values for each of the parameters on the

Setup menus. When you select this option or if you press <F5>, a conrmation

window appears. Select Yes to load the default values.

Save Changes & Reset

Once you are nished making your selections, choose this option from the Exit

menu to ensure the values you selected are saved. When you select this option or

if you press <F10>, a conrmation window appears. Select Yes to save changes

and exit.

Discard Changes & Exit

This option allows you to exit the Setup program without saving your changes.

When you select this option or if you press <Esc>, a conrmation window appears.

Select Yes to discard changes and exit..

ASUS EZ Mode

This option allows you to enter the EZ Mode screen.

Launch EFI Shell from lesystem device

This option allows you to attempt to launch the EFI Shell application (shellx64.e)

from one of the available lesystem devices.

ROG Crosshair V Formula 3-39

3.10 Updating BIOS

The ASUS website publishes the latest BIOS versions to provide enhancements

on system stability, compatibility, or performance. However, BIOS updating is

potentially risky. If there is no problem using the current version of BIOS, DO

NOT manually update the BIOS. Inappropriate BIOS updating may result in the

system’s failure to boot. Carefully follow the instructions of this chapter to update

your BIOS if necessary.

Visit the ASUS website (www.asus.com) to download the latest BIOS le for this

motherboard.

The following utilities allow you to manage and update the motherboard BIOS

setup program.

1. ASUS Update: Updates the BIOS in Windows® environment.

2. ASUS EZ Flash 2: Updates the BIOS using a USB ash drive.

3. ASUS BIOS Updater: Updates and backups the BIOS in DOS environment

using the motherboard support DVD and a USB ash disk drive.

Refer to the corresponding sections for details on these utilities.

Save a copy of the original motherboard BIOS le to a USB ash disk in case

you need to restore the BIOS in the future. Copy the original motherboard BIOS

using the ASUS Update or BIOS Updater utilities.

3-40 Chapter 3: BIOS setup

3.10.1 ASUS Update utility

The ASUS Update is a utility that allows you to manage, save, and update the

motherboard BIOS in Windows® environment. The ASUS Update utility allows you

to:

• Update the BIOS directly from the Internet

• Download the latest BIOS le from the Internet

• Update the BIOS from an updated BIOS le

• Save the current BIOS le

• View the BIOS version information

This utility is available in the support DVD that comes with the motherboard

package.

ASUS Update requires an Internet connection either through a network or an

Internet Service Provider (ISP).

Launching ASUS Update

After installing AI Suite II from the motherboard support DVD, launch ASUS

Update by clicking Update > ASUS Update on the AI Suite II main menu bar.

Quit all Windows® applications before you update the BIOS using this utility.

Updating the BIOS through the Internet

To update the BIOS through the

Internet:

1. From the ASUS Update screen,

select Update BIOS from

Internet, and then click Next.

2. Select the ASUS FTP site

nearest you to avoid network

trafc.

If you want to enable the BIOS

downgradable function and auto

BIOS backup function, check the

checkboxs before the two items

on the screen.

ROG Crosshair V Formula 3-41

4. You can decide whether to

change the BIOS boot logo,

which is the image appearing

on screen during the Power-On

Self-Tests (POST). Click Yes if

you want to change the boot logo

or No to continue.

3. Select the BIOS version that you

want to download. Click Next.

7. Follow the onscreen instructions to complete the update process.

5. Click Browse to locate your

desired picture le.

6. Adjust the picture resolution

if needed and click Next to

continue.

3-42 Chapter 3: BIOS setup

• The screenshots in this section are for reference only. The actual BIOS

information vary by models.

• Refer to the software manual in the support DVD or visit the ASUS website

at www.asus.com for detailed software conguration.

Updating the BIOS through a BIOS le

To update the BIOS through a BIOS le:

1. From the ASUS Update screen,

select Update BIOS from le,

and then click Next.

2. Locate the BIOS le from the

Open window, click Open, and

click Next.

3. You can decide whether to

change the BIOS boot logo. Click

Yes if you want to change the

boot logo or No to continue.

4. Follow the onscreen instructions

to complete the update process.

ROG Crosshair V Formula 3-43

3.10.2 ASUS EZ Flash 2 Utility

The ASUS EZ Flash 2 Utility feature allows you to update the BIOS without having

to use a bootable oppy disk or an OS-based utility.

Before you start using this utility, download the latest BIOS from the ASUS

website at www.asus.com.

To update the BIOS using EZ Flash 2 Utility:

1. Insert the USB ash disk that contains the latest BIOS le to the USB port.

2. Enter the Advanced Mode of the BIOS setup program. Go to theEnter the Advanced Mode of the BIOS setup program. Go to the Tool menu

to select ASUS EZ Flash 2 Utility and press <Enter> to enable it.

3. Press <Tab> to switch to the Drive eld.

4. Press the Up/Down arrow keys to nd the USB ash disk that contains the

latest BIOS, and then press <Enter>.

5. Press <Tab> to switch to the Folder Info eld.

6. Press the Up/Down arrow keys to nd the BIOS le, and then press <Enter>

to perform the BIOS update process. Reboot the system when the update

process is done.

3-44 Chapter 3: BIOS setup

• This function can support devices such as a USB ash disk with FAT 32/16

format and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent

system boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and

stability. Select the Load Optimized Defaults item under the Exit menu. See

section 3.9 Exit Menu for details.

ROG Crosshair V Formula 3-45

Booting the system in DOS environment

1. Insert the USB ash drive with the latest BIOS le and BIOS Updater to the

USB port.

2. Boot your computer. When the ASUS Logo appears, press <F8> to show

the BIOS Boot Device Select Menu. Insert the support DVD into the optical

drive and select the optical drive as the boot device.

Welcome to FreeDOS (http://www.freedos.org)!

C:\>d:

D:\>

3. When the Make Disk menu appears, select the FreeDOS command prompt

item by pressing the item number.

4. At the FreeDOS prompt, type d: and press <Enter> to switch the disk from

Drive C (optical drive) to Drive D (USB ash drive).

3.10.3 ASUS BIOS Updater

The ASUS BIOS Updater allows you to update BIOS in DOS environment. This

utility also allows you to copy the current BIOS le that you can use as a backup

when the BIOS fails or gets corrupted during the updating process.

The succeeding utility screens are for reference only. The actual utility screen

displays may not be same as shown.

Before updating BIOS

1. Prepare the motherboard support DVD and a USB ash drive in FAT32/16

format and single partition.

2. Download the latest BIOS le and BIOS Updater from the ASUS website at

http://support.asus.com and save them on the USB ash drive.

• NTFS is not supported under DOS environment. Do not save the BIOS le

and BIOS Updater to a hard disk drive or USB ash drive in NTFS format.

• Do not save the BIOS le to a oppy disk due to low disk capacity.

3. Turn off the computer and disconnect all SATA hard disk drives (optional).

Please select boot device:

SATA: XXXXXXXXXXXXXXXX

USB XXXXXXXXXXXXXXXXX

UEFI: XXXXXXXXXXXXXXXX

Enter Setup

 ↑ and ↓ to move selection

ENTER to select boot device

ESC to boot using defaults

3-46 Chapter 3: BIOS setup

2. The BIOS Updater backup screen appears indicating the BIOS backup

process. When BIOS backup is done, press any key to return to the DOS

prompt.

ASUSTek BIOS Updater for DOS V1.18 [2011/04/08]

Current ROM Update ROM

Note

Saving BIOS:

PATH: A:\

BOARD: Crosshair V Formula

VER: 0239

DATE: 08/04/2011

BOARD: Unknown

VER: Unknown

DATE: Unknown

BIOS backup is done! Press any key to continue.

D:\>bupdater /oOLDBIOS1.rom

Filename Extension

Backing up the current BIOS

To backup the current BIOS le using the BIOS Updater

Ensure that the USB ash drive is not write-protected and has enough free

space to save the le.

1. At the FreeDOS prompt, type bupdater /o[lename] and press <Enter>.

The [lename] is any user-assigned lename with no more than eight

alphanumeric characters for the lename and three alphanumeric characters

for the extension.

ROG Crosshair V Formula 3-47

4. Select Yes and press <Enter>. When BIOS update is done, press <ESC> to

exit BIOS Updater. Restart your computer.

DO NOT shut down or reset the system while updating the BIOS to prevent

system boot failure!

• For BIOS Updater version 1.04 or later, the utility automatically exits to the

DOS prompt after updating BIOS.

• Ensure to load the BIOS default settings to ensure system compatibility and

stability. Select the Load Optimized Defaults item under the Exit BIOS

menu. See Chaper 3 of your motherboard user manual for details.

• Ensure to connect all SATA hard disk drives after updating the BIOS le if

you have disconnected them.

Updating the BIOS le

To update the BIOS le using BIOS Updater

1. At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.

ASUSTek BIOS Updater for DOS V1.18 [2011/04/08]

Current ROM Update ROM

Note

[Enter] Select or Load [Tab] Switch [V] Drive Info

[Up/Down/Home/End] Move [B] Backup [Esc] Exit

P8P67D.ROM 4194304 2010-08-05 17:30:48

PATH: A:\

BOARD: Crosshair V Formula

VER: 0204

DATE: 08/04/2011

BOARD: Unknown

VER: Unknown

DATE: Unknown

D:\>bupdater /pc /g

2. The BIOS Updater screen appears as below.

3. Press <Tab> to switch between screen elds and use the <Up/Down/Home/

End> keys to select the BIOS le and press <Enter>. BIOS Updater checks

the selected BIOS le and prompts you to conrm BIOS update.

Are you sure to update BIOS?

Yes No

3-48 Chapter 3: BIOS setup

Software

support

This chapter describes the contents of

the support DVD that comes with the

motherboard package and the software.

ROG Crosshair V Formula

Chapter summary 4

4.1 Installing an operating system ................................................... 4-1

4.2 Support DVD information ............................................................ 4-1

4.3 Software information ................................................................... 4-8

4.4 RAID congurations .................................................................. 4-38

4.5 Creating a RAID driver disk ....................................................... 4-43

ROG Crosshair V Formula 4-1

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the le ASSETUP.EXE from the BIN folder. Double-click the

ASSETUP.EXE to run the DVD.

4.1 Installing an operating system

This motherboard supports Windows® XP/64-bit XP/Vista/7 operating systemsXP/64-bit XP/Vista/7 operating systems operating systems

(OS). Always install the latest OS version and corresponding updates to maximize

the features of your hardware.

4.2 Support DVD information

The support DVD that came with the motherboard package contains the drivers,

software applications, and utilities that you can install to avail all motherboard features.

4.2.1 Running the support DVD

Place the support DVD to the optical drive. The DVD automatically displays the

Drivers menu if Autorun is enabled in your computer.

• Motherboard settings and hardware options vary. Use the setup

procedures presented in this chapter for reference only. Refer to your OS

documentation for detailed information.

• Ensure that you install Windows® XP Service Pack 3 or later versions

before installing the drivers for better compatibility and system stability.

The contents of the support DVD are subject to change at any time without

notice. Visit the ASUS website at www.asus.com for updates.

Click an icon to

display support

DVD/motherboard

information

Click an item to install

4-2 Chapter 4: Software support

4.2.2 Drivers menu

The drivers menu shows the available device drivers if the system detects installed

devices. Install the necessary drivers to activate the devices.

AMD Chipset Driver

Installs the AMD® chipset driver.

Realtek Audio Driver

Installs the Realtek® audio driver and application.

ASUS ROG THUNDERBOLT Audio Driver

Installs the ASUS ROG ThunderBolt audio driver and application.

ASUS ROG THUNDERBOLT LAN Driver

Installs the ASUS ROG ThunderBolt LAN driver and application.

Browser Conguration Utility

Installs the browser conguration utility.

USB 3.0 Driver

Installs the USB 3.0 driver.

Asmedia SATA Controller Driver

Installs the Asmedia SATA Controller driver.

The ASUS ROG THUNDERBOLT Audio/LAN Drivers appear only when ROG

ThunderBolt has been installed in the system.

ROG Crosshair V Formula 4-3

4.2.3 Utilities menu

The Utilities menu shows the applications and other software that the motherboard

supports.

ASUS AI Suite II

Installs the ASUS AI Suite II.

ASUS ROG Connect

Installs the ASUS ROG Connect utility.

ASUS ROG Connect Plus

Installs the ASUS ROG Connect Plus utility.

ASUS ROG GameFirst

Installs the ASUS ROG GameFirst utility.

AMD OverDrive Utility (AOD)

Installs the AMD® OverDrive utility.

Sound Blaster X-Fi MB 2

Installs the Sound Blaster X-Fi MB 2 utility.

Adobe Reader 9

Installs the Adobe® Reader that allows you to open, view, and print documents in

Portable Document Format (PDF).

Anti-Virus Utility

The anti-virus application scans, identies, and removes computer viruses. View

the online help for detailed information.

4-4 Chapter 4: Software support

4.2.4 Make disk menu

The Make disk menu contains items to create the AMD AHCI/RAID 32/64bit driver

disk.

AMD AHCI/RAID Driver Disk

Allows you to create an AMD AHCI/RAID driver disk.

4.2.5 Manual menu

The Manuals menu contains a list of supplementary user manuals. Click an item to

open the folder of the user manual.

Most user manual les are in Portable Document Format (PDF). Install the

Adobe® Acrobat® Reader from the Utilities menu before opening a user manual

le.

ROG Crosshair V Formula 4-5

4.2.7 ASUS Contact information

Click the Contact tab to display the ASUS contact information.

4.2.6 Video menu

Click the Video tab to display a list of video clips. Click the video titles to watch

ROG users’ outstanding performances with ROG motherboards.

4-6 Chapter 4: Software support

4.2.8 Other information

The icons on the top right corner of the screen give additional information on the

motherboard and the contents of the support DVD. Click an icon to display the

specied information.

Motherboard Info

Displays the general specications of the motherboard.

Browse this DVD

Displays the support DVD contents in graphical format.

ROG Crosshair V Formula 4-7

Filelist

Displays the contents of the support DVD and a brief description of each in text format.

4-8 Chapter 4: Software support

4.3 Software information

Most of the applications in the support DVD have wizards that will conveniently

guide you through the installation. View the online help or readme le that came

with the software application for more information.

4.3.1 ASUS AI Suite II

ASUS AI Suite II allows you to launch several ASUS utilities easily.

Installing AI Suite II

To install AI Suite II on your computer:

1. Place the support DVD to the optical drive. The Drivers installation tab

appears if your computer has an enabled Autorun feature.

2. Click the Utilities tab, then click AI Suite II.

3. Follow the screen instructions to complete installation.

Launching AI Suite II

You can launch AI Suite II right after installation or anytime from the Windows®

desktop.

To launch AI Suite from the Windows® desktop, click Start > All Programs >

ASUS > AI Suite II > AI Suite II v1.xx.xx. The AI Suite II main window appears.

After launching the application, the AI Suite II icon appears in the Windows®

notication area. Click the icon to close or restore the application.

Using AI Suite II

Click each button to select and launch a desired utility, to monitor or update the

system, to display the system information and to customize your settings.

The screenshots of AI Suite II in this user manual are for regerence only. The

actual screenshots vary with models.

ROG Crosshair V Formula 4-9

4.3.2 Tool

TurboV EVO

ASUS TurboV EVO introduces Manual Mode that allows you to manually adjust

the CPU frequency and related voltages as well as Auto Tuning function that offers

automatic and easy overlocking and system level up. After installing AI Suite II from

the motherboard support DVD, launch TurboV EVO by clicking Tool > TurboV

EVO on the AI Suite II main menu bar.

Refer to the software manual in the support DVD or visit the ASUS website at

www.asus.com for detailed software conguration.

Manual Mode

Manual Mode allows you to overclock the BCLK frequency, CPU voltage, IMC

voltage, and DRAM Bus voltage in WIndows® environment and takes effect in

real-time without exiting and rebooting the OS.

Refer to the CPU documentation before adjusting CPU voltage settings. Setting

a high voltage may damage the CPU permanently, and setting a low voltage

may make the system unstable.

For advanced overclock ability, adjust rst the BIOS items, and then proceed

more detailed adjustments in More Settings.

Save the current

settings as a new

prole

Voltage

Adjustment bars

Current values

Target values

Load prole

Manual Mode

Auto Tuning Mode

Click to show / hide

more settings

Applies all changes

immediately

Undoes all changes

without applying

Click to restore all

start-up settings

For system stability, all changes made in TurboV will not be saved to BIOS

settings and will not be kept on the next system boot. Use the Save Prole

function to save your customized overclocking settings and manually load the

prole after Windows starts.

4-10 Chapter 4: Software support

Using Advanced Mode

Click More Settings, and then click the Advanced Mode tab to adjust the

advanced voltage settings.

Advanced mode

Applies all changes

immediately

Undoes all changes

without applying

Click to restore

all start-up

settings

Current values

Target values Voltage

Adjustment bars

CPU Ratio

Allows you to manually adjust the CPU ratio.

1. Click More Settings, and then click the CPU Ratio tab.

2. Drag the adjustment bar upwards or downwards to the desired value.

3. You will requested to restart the system. Click Yes to make the change take

effect.

ROG Crosshair V Formula 4-11

CPU Ratio

Applies all changes

immediately

Undoes all changes

without applying

Click to restore

all start-up

settings

Adjustment bar

• Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU

Ratio function in TurboV. Refer to Chapter 3 of your motherboard user

manual for details.

• The CPU Ratio bars show the status of the CPU cores, which vary with

your CPU model.

Auto Tuning

ASUS TurboV EVO includes two auto tuning modes, providing the most exible

auto-tuning options.

• The overclocking result varies with the CPU model and the system

conguration.

• To prevent overheating from damaging the motherboard, a better thermal

environment is strongly recommended.

• Fast Tuning: fast CPU overclocking

• Extreme Tuning: extreme

overclocking for CPU and memory

Using Fast Tuning

1. Click the Auto Tuning tab

and then click Fast.

2. Read through the warning

messages and click OK to

start auto-overclocking.

4-12 Chapter 4: Software support

3. TurboV automatically

overclocks the CPU, saves

BIOS settings and restarts

the system. After re-entering

Windows, a message

appears indicating auto

tuning success. Click OK to

exit.

Using Extreme Tuning

1. Click the Auto Tuning tab

and then click Extreme.

2. Read through the warning

messages and click OK to

start auto-overclocking.

3. TurboV automatically

overclocks the CPU and

memory and restarts the

system. After re-entering

Windows, a message

appears indicating the

current overclocking result.

To keep the result, click

Stop.

ROG Crosshair V Formula 4-13

4. If you did not click Stop in

the previous step, TurboV

automatically starts further

system overclocking and

stability test. An animation

appears indicating the

overclocking process. Click

Stop if you want to cancel the

Overclocking process.

5. TurboV automatically adjusts

and saves BIOS settings

and restarts the system.

After re-entering Windows, a

message appears indicating

auto tuning success. Click

OK to exit.

4-14 Chapter 4: Software support

4.3.3 DIGI+ VRM

ASUS DIGI+ VRM allows you to adjust VRM voltage and frequency modulation

to enhance reliability and stability. It also provides the highest power efciency,

generating less heat to longer component lifespan and minimize power loss.

After installing AI Suite II from the motherboard support DVD, launch DIGI+ VRM

by clicking Tool > DIGI+ VRM on the AI Suite II main menu bar.

Application helps

Configuration

items and options

Apply all changes

immediately

Undo all changes

without applying

CPU Load-line Calibration

Load-line is dened by AMD® VRM

spec and affects CPU voltage. The

CPU working voltage will decrease

proportionally to CPU loading. Higher

load-line calibration could get higher

voltage and good overclocking

performance but increase the CPU and

VRM thermal.

• Regular: 0%

• Medium: 25%

• High: 50%

• Ultra High: 75%

• Extreme: 100%

• The actual performance boost may vary depending on your CPU

specication.

• Do not remove the thermal module. The thermal conditions should be

monitored.

Introduction on DIGI+ VRM Conguration Items

ROG Crosshair V Formula 4-15

CPU Current Capability

CPU Current Capability provides wider

total power range for overclocking. A

higher value setting gets higher VRM

power consumption delivery.

A higher value brings a wider total power

range and extends the overclocking

frequency range simultaneously.

Do not remove the thermal module when switching to Manual mode. The

thermal conditions should be monitored.

CPU Voltage Frequency

Switching frequency will affect the VRM

transient response and component

thermal. Higher frequency gets quicker

transient response.

Enable Spread Spectrum to enhance

system stability.

• VRM Fixed Frequency Range:

300–550kHz

• Manual Frequency Step: 10kHz

Suggestion: choose higher value when overclocking or under high CPU loading

for extra power support.

4-16 Chapter 4: Software support

• The actual performance boost may vary depending on your CPU

specication.

• Do not remove the thermal module. The thermal conditions should be

monitored.

CPU/NB Load-line Calibration

Load-line is dened by AMD VRM

spec and affects CPU/NB voltage. The

CPU/NB working voltage will decrease

proportionally to CPU/NB loading.

Higher load-line calibration could get

higher voltage and good overclocking

performance but increase the CPU/NB

and VRM thermal.

• Regular: 0%

• High: 50%

• Extreme: 100%

CPU/NB Current Capability

CPU/NB Current Capability provides

wider total power range for overclocking.

A higher value setting gets higher VRM

power consumption delivery.

A higher value brings a wider total power

range and extends the overclocking

frequency range simultaneously.

Suggestion: choose higher value when overclocking or under high CPU loading

for extra power support.

ROG Crosshair V Formula 4-17

CPU Power Phase Control

Phase number is the number of working

VRM phase. Increase phase number

under heavy system loading to get more

transient and better thermal performance.

Reduce phase number under light system

loading to increase VRM efciency.

• Standard: Phase control based on

CPU command.

• Optimized: ASUS optimized phase

tuning prole

• Extreme: Full phase mode

• Manual Adjustment: Phase number adjusted by current (A) step

Do not remove the thermal module when switching to Extreme and Manual

mode. The thermal conditions should be monitored.

CPU Power Duty Control

CPU Power Duty Control adjusts the

current of every VRM phase and the

thermal of every phase component.

Select the [T.Probe] option to maintain

VRM thermal balance or the [Extreme]

option to maintain VRM current balance.

• T.Probe: Thermal balance

• Extreme: Current balance

Do not remove the thermal module. The thermal conditions should be

monitored.

4-18 Chapter 4: Software support

4.3.4 EPU

EPU is an energy-efcient tool that satises different computing needs. This utility

provides several modes that you can select to save system power. Selecting

Auto mode will have the system shift modes automatically according to current

system status. You can also customize each mode by conguring settings like CPU

frequency, GPU frequency, vCore Voltage, and Fan Control.

Launching EPU

After installing AI Suite II from the motherboard support DVD, launch EPU by

clicking Tool > EPU on the AI Suite II main menu bar.

*• Select From EPU Installation to show the CO2 that has been reduced since

you installed EPU.

*• Select From the Last Reset to show the total CO2 that has been reduced

since you click the Clear button .

• Refer to the software manual in the support DVD or visit the ASUS website

at www.asus.com for detailed software conguration.

*Shifts between the display of

Total and Current CO2 reduced

vCore Voltage Downgrade

Adjustment bars

Displays the following

message if no VGA power

saving engine is detected.

Advanced settings for each mode

Multiple system

operating modes

Displays current mode

The items lighting up means

power saving engine is

activated

Displays the amount of CO2

reduced

Displays the

current CPU power

ROG Crosshair V Formula 4-19

4.3.5 FAN Xpert

FAN Xpert allows you to adjust both the CPU and chassis fan speeds according

to different ambient temperatures and your PC’s system loading. The various fan

proles offer exible controls of fan speeds to achieve a quiet and cool system

environment.

Launching FAN Xpert

After installing AI Suite II from the motherboard support DVD, launch FAN Xpert

by clicking Tool > Fan Xpert on the AI Suite II main window.

Setting

• Disable: disables the Fan Xpert function.

• Standard: adjusts fan speed in a moderate pattern.

• Silent: minimizes fan speed for quiet fan operation.

• Turbo: maximizes the fan speed for the best cooling effect.

• User: Allows you to congure the CPU fan prole under certain limitations.

Using FAN Xpert

Click Fan Name to select a fan to test the speed or click Setting to select a preset

mode for your selected fan.

4-20 Chapter 4: Software support

4.3.6 Probe II

Probe II is a utility that monitors the computer’s vital components, and detects and

alerts you of any problem with these components. Probe II senses fan rotations,

CPU temperature, and system voltages, among others. Because Probe II is

software-based, you can start monitoring your computer the moment you turn

it on. With this utility, you are assured that your computer is always at a healthy

operating condition.

Launching Probe II

After installing AI Suite II from the motherboard support DVD, launch PC Probe II

by clicking Tool > Probe II on the AI Suite II main window.

Monitoring hardware

The hardware monitor panels display the current value of a system sensor such

as fan rotation, CPU temperature, and voltages. Click the tab on the top to switch

display content. Click the box before each sensor to enable the alert function.

Adjusting the sensor threshold value

You can adjust the sensor threshold value in the monitor panel by moving the

sliders.

ROG Crosshair V Formula 4-21

Setting preference

Click Preference on the top to customize Probe II, including detection cycle, and

temperature display unit.

Checking Alert Log

Click Alert Log on the top to check the log. Click Clear to reset the log if needed.

4-22 Chapter 4: Software support

4.3.7 Sensor Recorder

Sensor Recorder allows you to monitor the changes in the system voltage,

temperature, and fan speed, as well as recording the changes.

Launching Sensor Recorder

After installing AI Suite II from the motherboard support DVD, click Tool > Sensor

Recorder on the AI Suite II main menu bar to launch PC Probe II.

Conguring Sensor Recorder

Click the Voltage/Temperature/Fan Speed tabs and select the sensors that you

want to monitor. The History Record tab allows you to record the changes in the

sensors that you enable.

Select the

sensors that

you want to

monitor

Click to zoom in/out the Y axis

Click to zoom in/out the X axis

Click to return to

the default mode

Drag to view

the status

during a

certain period

of time

ROG Crosshair V Formula 4-23

Voltage

The Voltage tab displays the status

of the system voltages. Select the

items that you want to monitor.

Temperature

The Temperature tab displays

the status of the CPU and

motherboard temperatures. Select

the items that you want to monitor.

Fan Speed

The Fan Speed tab displays

the status of the rotations (per

minute) of the CPU, chassis, and

power fans. Select the items that

you want to monitor.

4-24 Chapter 4: Software support

History Record

The History Record tab allows you to record the changes in the system.

To use the recording function

1. Select the sensor type, and then select the sensors whose changes you

want to record.

2. Select the record interval and duration.

3. Click Start recording. To stop, click Recording while the recording is in

progress.

To edit the recorded history

• Select a date to view a certain recorded history.

• If you want to delete a recorded history, click beside the date of the

selected recorded history to clear it.

ROG Crosshair V Formula 4-25

4.3.8 ROG Connect

ROG Connect allows you to monitor and adjust the local PC through your remote

PC.

Setting up USB connection between your local and remote PC

• Install ROG Connect on the remote PC from the provided Support DVD

before using ROG Connect.

• ROG Connect must work with ROG Connect Plus to avail full function.

Ensure that you install ROG Connect Plus on your local PC from the

provided Support DVD before using ROG Connect.

1. Connect the provided ROG Connect

cable to the local PC and the remote

PC.

2. Switch on the ROG Connect switch

on the board.

3. Double-click the RC TweakIt shortcut

on the remote PC to activate the function

Using RC TweakIt

Use the sliders and buttons to monitor or adjust your local PC.

4-26 Chapter 4: Software support

RC Poster

RC Poster shows the status of the local

system during the POST. You can switch

the display mode between String and

Code.

RC Remote

RC Remote allows you to operate your

local system through the ROG Connect

cable.

RC Diagram

RC Diagram allows you to monitor and

record your local system status.

Click Function to display more options.

ROG Crosshair V Formula 4-27

GPU TweakIt

GPU TweakIt allows you to control and monitor the installed GPU on the

local system. Use the sliders to adjust the values and click Apply to save your

customized settings.

4-28 Chapter 4: Software support

4.3.9 ROG ThunderBolt LAN

Bigfoot Killer Network Manager

1. Double-click Bigfoot Killer Network Manager on the desktop.

2. Ensure that you have connected to the internet and click

Start to perform the bandwidth test.

Network

Click the Network tab on the left to congure your network settings.

ROG ThunderBolt is only available on selected model.

ROG Crosshair V Formula 4-29

Advanced

Click the Advanced tab on the left to congure Killer Network Manager settings.

You can select the display information, set up the application control, and other

congurations.

Overviews

Click the Overview tab on the left to see the system information and the current

status of the network connection.

4-30 Chapter 4: Software support

PC Monitor

Click the PC Monitor tab on the left to monitor and record the performance of your

system. Click View Type to select a desired device for monitoring.

Applications

Click the Applications tab on the left to see the network usage of each applications.

To see the network usage of the applications, you have to enable the application

control rst. Click the Advanced tab and enable the Application Control.

ROG Crosshair V Formula 4-31

4.3.10 ThunderBolt Audio

Double-click ROG ThunderBolt Audio on the desktop.

Link to ROG

ofcial website

Select and switch

the audio output and

input device

Conguration area

Congure the Settings

Switch the

display panel

Adjust the volume

Main Control Panel

Enable SVN

Activate DS3D GX

• If you connect your speakers or headphone to the audio

jack of the ThunderBolt bracket, select Speakers as your

default audio output device.

• If you connect your speakers or headphone to the audio

jack of the chassis front panel, select Headphone as your

default audio output device.

• SVN (Smart Volume Normalization): Enable this function to avoid large volume

uctuations.

• DS3D GX: Enable DirectSound3D Game Extensions to support EAX and

DirectSound3D extensions for EAX and DS3D games on Windows.

ROG ThunderBolt is only available on selected model.

4-32 Chapter 4: Software support

Game Proles

Click the Switch to switch the panel from Status Panel to the Game Proles Panel.

Click the plus sign (+) to add your customized proles or the minus sign (-) to

delete unwanted proles.

Switch to the corresponding game prole according to the game you play.

Switches the display panel

Add or Delete a prole

FPS Mode (First Person Shooter mode)

HiFi Mode

Racing Mode

RTS Mode (Real-Time Strategy mode)

Manual (You customized mode)

ROG Crosshair V Formula 4-33

Audio output

Click the corresponding box to select from Speakers, Headphones, and SPDIF-Out

for the output device. Click each button directly to congure the related settings.

Headphone Settings

Click Headphone and select Headphone Settings to do the gain adjustment.

Select the gain tuning according to your headphone impedance.

A wrong gain tuning setting may damage your headphone. Select a proper gain

according to your headphone specication.

Only audio output from the front panel via the AAFP cable supports the

headphone gain tuning function.

4-34 Chapter 4: Software support

Audio input

Click the corresponding box to select from Mic and Line-In for the input device.

Click each button directly to congure the related settings.

Xear Surround Effect

Click Headphone and select Xear Surround Effect to enable the Xear

Surround Effect.

Ensure to select a proper Room Size for a better surround effect.

ROG Crosshair V Formula 4-35

4.3.11 Sound Blaster X-Fi MB 2

This application is available only under Windows Vista and Windows 7 operating

system.

The onboard 8-channel HD audio (High Denition Audio, previously code-named

Azalia) CODEC enables high-quality 192KHz/24-bit audio output, jack-sensing

feature, retasking functions and multi-streaming technology that simultaneously

sends different audio streams to different destinations.

Activating Sound Blaster X-Fi MB 2

After installing Sound Blaster X-Fi MB 2 successfully, you need to activate this

utility online before rst use.

1. Double-click Activate on the desktop.

Ensure that you have successfully installed the LAN driver and have connected

to the Internet.

2. Click Activate to start activation.

This installation requires that you have the latest version of the Windows Media

Player installed on your system. Ensure to download and install the latest

Windows Media Player before installing Sound Blaster X-Fi MB 2.

4-36 Chapter 4: Software support

Using Sound Blaster X-Fi MB 2

Speaker and Headphone

EAX

Equalizer

Mixer

THX

Adjusting Volume

Restoring to the Default

Mute

Speaker and Headphone

You can adjust the

speaker-related or the

headphone-related congurations.

Environment audio extensions

(EAX)

After enabling the EAX effects,

you are allowed to select and add

your desired environment sounds

into the music.

ROG Crosshair V Formula 4-37

Equalizer

You can manually adjust the audio

frequency with the equalizer and

customize your presets for later

use.

Mixer

You can manually adjust the

audio volumes, including Line In,

Stereo Mix and Microphone, when

recording or during the playback.

THX

THX is a high-delity sound

technology that allows you to

adjust the surround sound effect,

sub-woofer volume, etc..

4-38 Chapter 4: Software support

4.4 RAID congurations

The motherboard comes with the AMD

SB950 chipset that allows you to congure

Serial ATA hard disk drives as RAID sets. The motherboard supports the following

RAID congurations: RAID 0, RAID 1, RAID 5 and RAID 10.

• You must install Windows® XP Service Pack 2 or later versions before using

Serial ATA hard disk drives. The Serial ATA RAID feature is available only if

you are using Windows® XP SP2 or later versions.

• Due to Windows® XP / Vista limitation, a RAID array with the total capacity

over 2TB cannot be set as a boot disk. A RAID array over 2TB can only be

set as a data disk only.

• If you want to install a Windows® operating system to a hard disk drive

included in a RAID set, you have to create a RAID driver disk and load the

RAID driver during OS installation. Refer to section 4.5 Creating a RAID

driver disk for details.

4.4.1 RAID denitions

RAID 0 (Data striping) optimizes two identical hard disk drives to read and write

data in parallel, interleaved stacks. Two hard disks perform the same work as a

single drive but at a sustained data transfer rate, double that of a single disk alone,

thus improving data access and storage. Use of two new identical hard disk drives

is required for this setup.

RAID 1 (Data mirroring) copies and maintains an identical image of data from

one drive to a second drive. If one drive fails, the disk array management software

directs all applications to the surviving drive as it contains a complete copy of

the data in the other drive. This RAID conguration provides data protection and

increases fault tolerance to the entire system. Use two new drives or use an

existing drive and a new drive for this setup. The new drive must be of the same

size or larger than the existing drive.

RAID 5 stripes both data and parity information across three or more hard

disk drives. Among the advantages of RAID 5 conguration include better

HDD performance, fault tolerance, and higher storage capacity. The RAID

5 conguration is best suited for transaction processing, relational database

applications, enterprise resource planning, and other business systems. Use a

minimum of three identical hard disk drives for this setup.

RAID 10 is data striping and data mirroring combined without parity (redundancy

data) having to be calculated and written. With the RAID 10 conguration you get

all the benets of both RAID 0 and RAID 1 congurations. Use four new hard disk

drives or use an existing drive and three new drives for this setup.

ROG Crosshair V Formula 4-39

4.4.2 Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance,

install identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID conguration:

1. Install the SATA hard disks into the drive bays.

2. Connect the SATA signal cables.

3. Connect a SATA power cable to the power connector on each drive.

4.4.3 Setting the RAID item in BIOS

You must enable the RAID function in the BIOS Setup before creating RAID

volume(s) using SATA HDDs. To do this:

1. Enter the BIOS Setup during POST.

2. Go to the Advanced menu > SATA Conguration, and then press <Enter>.

3. Set the SATA Port1-Port4 item to [RAID].

4. Save your changes, and then exit the BIOS Setup.

Refer to Chapter 3 for details on entering and navigating through the BIOS

Setup.

When setting the SATA Port1-Port4 item to [RAID], all four SATA ports run at

RAID mode. However, you can set the SATA ports 5 and 6 to [IDE] mode. See

section 3.5.4 SATA Conguration for details.

4-40 Chapter 4: Software support

The Main Menu allows you to select an operation to perform. The Main Menu

options include:

• View Drive Assignments: shows the status of the hard disk drives.

• LD View / LD Dene Menu�Dene Menu�: displays the existing RAID set information /

creates a

RAID 0, RAID 1, RAID 5 or RAID 10 conguration.

• Delete LD Menu: deletes a selected RAID set and partition.

• Controller Conguration� shows the system resources conguration.

Press <1>, <2>, <3>, or <4> to enter the option you need; press <ESC> to exit the

utility.

The RAID BIOS setup screens shown in this section are for reference only, and

may not exactly match the items on your screen.

To create a RAID volume using more than four hard disk drives, ensure that the

SATA connectors 5/6 are set to [RAID] mode.

View Drive Assignments .......[ 1 ]

LD View / LD Dene Menu ......[ 2 ]

Delete LD Menu ...............[ 3 ]

Controller Conguration ......[ 4 ]

[ Main Menu ]

Press 1..4 to Select Option [ESC] Exit

[ Keys Available ]

4.4.4 AMD® Option ROM Utility

To enter the AMDAMD® Option ROM utility:Option ROM utility:

1. Boot up your computer.

2. During POST, press <Ctrl> + <F> to display the utility main menu.

ROG Crosshair V Formula 4-41

Creating a RAID volume

To create a RAID volume:

1. In the Main Menu, press <2> to enter the LD View / LD Dene Menu

function.

2. Press <Ctrl> + <C>, and the following screen appears.

3. Move to the RAID Mode item and press <Space> to select a RAID mode to

create.

4. Move to the Assignment item by using the down arrow key and set Y to

select the hard disk drives you want to include in the RAID set.

5. Press <Ctrl> + <Y> to save the setting.

6. The utility prompts the following message. Press <Ctrl> + <Y> to input the LDThe utility prompts the following message. Press <Ctrl> + <Y> to input the LDPress <Ctrl> + <Y> to input the LD

name.

[↑] Up [↓] Down [PaUp/PaDn] Switch page [Space] Change Option

[Ctrl-Y] Save [ESC] Exit

[ Keys Available ]

[ LD Dene Menu ]

[ Drives Assignments ]

Port:ID Drive Model Capabilities Capacity(GB) Assignment

01:00 xxxxxxxxx xxxxxxx xxxxxx Y

02:00 xxxxxxxxx xxxxxxx xxxxxx Y

03:00 xxxxxxxxx xxxxxxx xxxxxx N

04:00 xxxxxxxxx xxxxxxx xxxxxx N

LD No LD Name RAID Mode Drv

LD 1 Logical Drive 1 RAID 0 2

Strip Block 64 KB Fast Init ON

Gigabyte Boundary ON Cache Mode WriteThru

Please press Ctrl-Y key to input the LD Name

or press any key to exit.

If you do not input any LD name, the default LD

name will be used.

7. Eenter an LD name, and then press any key to continue.enter an LD name, and then press any key to continue.

Enter the LD name here:

Fast Initialization Option has been selected

It will erase the MBR data of the disks.

8. Press <Ctrl> + <Y> to erase the MBR, or you may press any key to abort thePress <Ctrl> + <Y> to erase the MBR, or you may press any key to abort the

settings.

9. Press <Ctrl> + <Y> to enter the screen to modify the array capacity, or press

any key to use the maximum capacity.

4-42 Chapter 4: Software support

Deleting a RAID conguration

Take caution when deleting a RAID volume. You will lose all data on the hard

disk drives when you delete a RAID volume.

To delete a RAID volume:

1. In the Main Menu, press <3> to enter the Delete LD function.

2. Select the RAID item you want to delete and press <Del> or <Alt> + <D>.

[↑] Up [↓] Down [PaUp/PaDn] Switch page [Del/Alt+D] Delete LD

[ Keys Available ]

[ Delete LD Menu ]

LD No RAID Mode Drv Capacity(GB) Status

LD 1 RAID 0 2 xxxxxx Functional

Dispalying a RAID set information

To display a RAID set information:

1. In the Main Menu, press <2> to enter the “LD View / LD Dene Menu”

function.

2. Select a RAID item and press <Enter> to display its information.

Any Key To Continue.......

[ View LD Denation Menu ]

[ Drives Assignments ]

Port:ID Drive Model Capabilities Capacity(GB)

01:00 xxxxxxxxx xxxxxxx xxxxxx

02:00 xxxxxxxxx xxxxxxx xxxxxx

LD No LD Name RAID Mode Drv Capacity(GB)

LD 1 xxxxx RAID 0 2 157.99

Strip Block 64 KB Cache Mode WriteThru

3. The utility prompts the following messages:

Press <Ctrl> + <Y> to delete the RAID volume.

Press Ctrl-Y to delte the data in the disk!

or press any other key to abort...

ROG Crosshair V Formula 4-43

4.5 Creating a RAID driver disk

A oppy disk with the RAID driver is required when installing Windows® XP

operating system on a hard disk drive that is included in a RAID set. For Windows®

Vista or later operating systems, use either a USB ash drive with the RAID driver

or the support DVD.

• The motherboard does not provide a oppy drive connector. You have

to use a USB oppy disk drive when creating a SATA RAID driver disk.

• Windows® XP may not recognize the USB oppy disk drive due to

Windows® XP limitation. To work around this OS limitation, refer to section

4.5.4 Using a USB oppy disk drive.

4.5.1 Creating a RAID driver disk without entering the OS

To create a RAID driver disk without entering the OS

1. Boot your computer.

2. Press <Del> during POST to enter the BIOS setup utility.

3. Set the optical drive as the primary boot device.

4. Insert the support DVD into the optical drive.

5. Save changes and exit BIOS.

6. When the Make Disk menu appears, press <1> to create a RAID driver disk.

7. Insert a formatted oppy disk into the USB oppy disk drive, then press

<Enter>.

8. Follow the succeeding screen instructions to complete the process.

4.5.2 Creating a RAID driver disk in Windows®

To create a RAID driver disk in Windows®:

1. Start Windows®.

2. Plug the USB oppy disk drive and insert a oppy disk.

3. Place the motherboard support DVD into the optical drive.

4. Go to the Make Disk menu, and then click AMD AHCI/RAID 32/64bit xxxx

Driver to create a RAID driver disk.

5. Select USB oppy disk drive as the destination disk.

6. Follow the succeeding screen instructions to complete the process.

Write-protect the oppy disk to avoid a computer virus infection.

4-44 Chapter 4: Software support

4.5.3 Installing the RAID driver during Windows® OS

installation

If you use a SATA optical drive to run the OS installation disk, we strongly

recommend that you install the optical dirve to the SATA connectors 5/6 and set

them to [IDE] mode.

To install the RAID driver for Windows® XP

1. During the OS installation, the system prompts you to press the F6 key to

install

third-party SCSI or RAID driver.

2. Press <F6>, and then insert the oppy disk with RAID driver into the USB oppy

disk drive.

3. When prompted to select the SCSI adapter to install, select the RAID driver

for the corresponding OS version.

4. Follow the succeeding screen instructions to complete the installation.

To install the RAID driver for Windows® Vista or later OS

1. During the OS installation, click Load Driver to allow you to select the

installation media containing the RAID driver.

2. Insert the USB ash drive with RAID driver into the USB port or the support

DVD into the optical drive, and then click Browse.

3. Click the name of the device you’ve inserted, go to Drivers > RAID, and then

select the RAID driver for the corresponding OS version. Click OK.

4. Follow the succeeding screen instructions to complete the installation.

Before loading the RAID driver from a USB ash drive, you have to use anotheryou have to use another

computer to copy the RAID driver from the support DVD to the USB ash drive.

ROG Crosshair V Formula 4-45

4.5.4 Using a USB oppy disk drive

Due to OS limitation, Windows® XP may not recognize the USB oppy disk drive

when you install the RAID driver from a oppy disk during the OS installation.

To solve this issue, add the USB oppy disk drive’s Vendor ID (VID) and Product

ID (PID) to the oppy disk containing the RAID driver. Refer to the steps below:

1. Using another computer, plug the USB oppy disk drive, and insert the oppy

disk containing the RAID driver.

2. Right-click My Computer on

the Windows® desktop or start

menu, and then select Manage

from the pop-up window.

3. Select Device Manager.

From the Universal Serial Bus

controllers, right-click xxxxxx USB

Floppy, and then select Properties

from the pop-up window.

The name of the USB oppy

disk drive varies with different

vendors.

4. Click Details tab. The Vendor ID

(VID) and Product ID (PID) are

displayed.

5. Browse the contents of the

RAID driver disk to locate the le

txtsetup.oem.

6. Double-click the le. A window

appears, allowing you to select the

program for opening the oem le.

4-46 Chapter 4: Software support

7. Use Notepad to open the le.

8. Find the [HardwareIds.SCSI.Napa_i386_ahci8086] and

[HardwareIds.SCSI.Napa_amd64_ahci] sections in the txtsetup.oem le.

9. Type the following line to the bottom of the two sections:

id = “USB\VID_xxxx&PID_xxxx”, “usbstor”

[HardwareIds.SCSI.Napa_i386_ahci8086]

id= “PCI\VEN_1002&DEV_4392&CC_0104”,”ahcix86”

id= “PCI\VEN_1002&DEV_4391&CC_0106”,”ahcix86”

id= “PCI\VEN_1002&DEV_4393&CC_0104”,”ahcix86”

id= “USB\VID_03EE&PID_6901”, “usbstor”

[HardwareIds.SCSI.Napa_amd64_ahci]

id= “PCI\VEN_1002&DEV_4392&CC_0104”,”ahcix64”

id= “PCI\VEN_1002&DEV_4391&CC_0106”,”ahcix64”

id= “PCI\VEN_1002&DEV_4393&CC_0104”,”ahcix64”

id= “USB\VID_03EE&PID_6901”, “usbstor”

Multiple GPU

technology support

This chapter describes how to install and

congure multiple ATI® CrossFireX™ and

NVIDIA® SLI™ graphics cards.

ROG Crosshair V Formula

Chapter summary 5

5.1 ATI® CrossFireX™ technology .................................................... 5-1

5.2 NVIDIA® SLI™ technology ........................................................... 5-5

ROG Crosshair V Formula 5-1

5.1 ATI® CrossFireX™ technology

The motherboard supports the ATI® CrossFireX™ technology that allows you to

install multi-graphics processing units (GPU) graphics cards. Follow the installation

procedures in this section.

5.1.1 Requirements

• You should have two identical CrossFireX-ready graphics cards or one

CrossFireX-ready dual-GPU graphics card that are ATI® certied.

• Ensure that your graphics card driver supports the ATI CrossFireX technology.

Download the latest driver from the AMD website at www.amd.com.

• Ensure that your power supply unit (PSU) can provide at least the minimum

power required by your system.

5.1.2 Before you begin

For ATI CrossFireX to work properly, you have to uninstall all existing graphics card

drivers before installing ATI CrossFireX graphics cards to your system.

To uninstall existing graphics card drivers

1. Close all current applications.

2. For Windows XP, go to Control Panel > Add/Remove Programs.

For Windows Vista, go to Control Panel > Programs and Features.

For Windows 7, go to Control Panel > Programs > Uninstall a program.

3. Select your current graphics card driver/s.

4. For Windows XP, select Add/Remove.

For Windows Vista and 7, select Uninstall.

5. Turn off your computer.

• We recommend that you install additional chassis fans for better thermal

environment.

• Visit the ATI Game website at http://game.amd.com for the latest certied

graphics card and the supported 3D application list.

5-2 Chapter 5: Multiple GPU technology support

5. Connect two independent auxiliary

power sources from the power

supply to the two graphics cards

separately.

6. Connect a VGA or a DVI cable to the

graphics card.

4. Align and rmly insert the

CrossFireX bridge connector to the

goldngers on each graphics card.

Ensure that the connector is rmly

in place.

5.1.3 Installing CrossFireX graphics cards

The following pictures are for reference only. The graphics cards and the

motherboard layout may vary with models, but the installation steps remain the

same.

1. Prepare two CrossFireX-ready

graphics cards.

2. Insert the two graphics card into the

PCIEX16 slots.

3. Ensure that the cards are properly

seated on the slots.

Goldngers

CrossFireX bridge

ROG Crosshair V Formula 5-3

5.1.4 Installing the device drivers

Refer to the documentation that came with your graphics card package to install

the device drivers.

Ensure that your PCI Express graphics card driver supports the ATI®

CrossFireX™ technology. Download the latest driver from the AMD website

(www.amd.com).

5.1.5 Enabling the ATI® CrossFireX™ technology

After installing your graphics cards and the device drivers, enable the CrossFireX™

feature through the ATI Catalyst™ Control Center in Windows environment.

Launching the ATI Catalyst Control Center

To launch the ATI Catalyst Control Center

1. Right-click on the Windows® desktop and

select Catalyst(TM) Control Center.

You can also right-click the ATI icon in

the Windows notication area and select

Cayalist Control Center.

2. The Catalyst Control Center Setup

Assistant appears when the system

detects the existance of multi-

graphics cards. Click Go to continue

to the Catalyst Control Center

Advanced View window.

5-4 Chapter 5: Multiple GPU technology support

Enabling CrossFireX settings

1. In the Catalyst Control Center

window, click Graphics Settings >

CrossFireX > Congure.

2. From the Graphics Adapter list,

select the graphics card to act as

the display GPU.

3. Select Enable CrossFireX.

4. Click Apply, and then click OK to

exit the window.

ROG Crosshair V Formula 5-5

5.2 NVIDIA® SLI™ technology

The motherboard supports the NVIDIA® SLI™ (Scalable Link Interface) technology

that allows you to install multi-graphics processing units (GPU) graphics cards.

Follow the installation procedures in this section.

5.2.1 Requirements

• In SLI mode, you should have two identical SLI-ready graphics cards that are

NVIDIA® certied.

• Ensure that your graphics card driver supports the NVIDIA SLI technology.

Download the latest driver from the NVIDIA website (www.nvidia.com).

• Ensure that your power supply unit (PSU) can provide at least the minimum

power required by your system.

5.2.2 Installing two SLI-ready graphics cards

The following pictures are for reference only. The graphics cards and the

motherboard layout may vary with models, but the installation steps remain the

same.

1. Prepare two SLI-ready graphics

cards.

2. Insert the two graphics card into the

PCIEX16 slots. If your motherboard

has more than two PCIEX16 slots,

refer to Chapter 2 in this user

manual for the locations of the

PCIEX16 slots recommended for

multi-graphics card installation.

3. Ensure that the cards are properly seated on the slots.

• We recommend that you install additional chassis fans for better thermal

environment.

• Visit the NVIDIA zone website (http://www.nzone.com) for the latest certied

graphics card and supported 3D application list.

5-6 Chapter 5: Multiple GPU technology support

4. Align and rmly insert the SLI bridge connector to the goldngers on each

graphics card. Ensure that the connector is rmly in place.

5. Connect two independent auxiliary power sources from the power supply to

the two graphics cards separately.

6. Connect a VGA or a DVI cable to the graphics card.

5.2.3 Installing the device drivers

Refer to the documentation that came with your graphics card package to install

the device drivers.

Ensure that your PCI Express graphics card driver supports the NVIDIA® SLI™

technology. Download the latest driver from the NVIDIA website (www.nvidia.

com).

Goldngers

SLI bridge

5.2.4 Enabling the NVIDIA® SLI™ technology

After installing your graphics cards and the device drivers, enable the SLI feature

in NVIDIA® Control Panel under the Windows® operating system.

Launching the NVIDIA Control Panel

You can launch the NVIDIA Control Panel by the following two methods.

A. Right click on the empty space of the Windows®

desktop and select NVIDIA Control Panel.

The NVIDIA Control Panel window appears (See

Step B5).

ROG Crosshair V Formula 5-7

B1. If you cannot see the NVIDIA Control Panel item in

step (A), select Personalize.

B2. From the Personalization window,

select Display Settings.

B3. From the Display Settings dialog

box, click Advanced Settings.

5-8 Chapter 5: Multiple GPU technology support

B4. Select the NVIDIA GeForce tab, and

then click Start the NVIDIA Control

Panel.

B5. The NVIDIA Control Panel window

appears.

Enabling SLI settings

From the NVIDIA Control Panel window,

select Set SLI Conguration. Click

Enable SLI and set the display for

viewing SLI rendered content. When

done, click Apply.

ASUS contact information

ASUSTeK COMPUTER INC.

Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259

Telephone +886-2-2894-3447

Fax +886-2-2890-7798

E-mail info@asus.com.tw

Web site www.asus.com.tw

Technical Support

Telephone +86-21-38429911

Online support support.asus.com

ASUS COMPUTER INTERNATIONAL (America)

Address 800 Corporate Way, Fremont, CA 94539, USA

Telephone +1-812-282-3777

Fax +1-510-608-4555

Web site usa.asus.com

Technical Support

Telephone +1-812-282-2787

Support fax +1-812-284-0883

Online support support.asus.com

ASUS COMPUTER GmbH (Germany and Austria)

Address Harkort Str. 21-23, D-40880 Ratingen, Germany

Fax +49-2102-959911

Web site www.asus.de

Online contact www.asus.de/sales

Technical Support

Telephone +49-1805-010923*

Support Fax +49-2102-9599-11

Online support support.asus.com

* EUR 0.14/minute from a German xed landline; EUR 0.42/minute from a mobile phone.

EC Declaration of Conformity

We, the undersigned,

Manufacturer: ASUSTek COMPUTER INC.

Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C.

Country: TAIWAN

Authorized representative in Europe: ASUS COMPUTER GmbH

Address, City: HARKORT STR. 21-23, 40880 RATINGEN

Country: GERMANY

declare the following apparatus:

Product name : Motherboard

Model name : CROSSHAIR V FORMULA

conform with the essential requirements of the following directives:

2004/108/EC-EMC Directive

EN 55022:2006+A1:2007

EN 61000-3-2:2006+A1:2009+A2:2009

EN 55013:2001+A1:2003+A2:2006

EN 55024:1998+A1:2001+A2:2003

EN 61000-3-3:2008

EN 55020:2007

1999/5/EC-R &TTE Directive

EN 300 328 V1.7.1(2006-05)

EN 300 440-1 V1.4.1(2008-05)

EN 300 440-2 V1.2.1(2008-03)

EN 301 511 V9.0.2(2003-03)

EN 301 908-1 V3.2.1(2007-05)

EN 301 908-2 V3.2.1(2007-05)

EN 301 893 V1.4.1(2005-03)

EN 302 544-2 V1.1.1(2009-01)

EN 50360:2001

EN 50371:2002

EN 50385:2002

EN 301 489-1 V1.8.1(2008-04)

EN 301 489-3 V1.4.1(2002-08)

EN 301 489-4 V1.3.1(2002-08)

EN 301 489-7 V1.3.1(2005-11)

EN 301 489-9 V1.4.1(2007-11)

EN 301 489-17 V2.1.1(2009-05)

EN 301 489-24 V1.4.1(2007-09)

EN 302 326-2 V1.2.2(2007-06)

EN 302 326-3 V1.3.1(2007-09)

EN 301 357-2 V1.3.1(2006-05)

EN 302 623 V1.1.1(2009-01)

2006/95/EC-LVD Directive

EN 60950-1:2006

EN 60950-1:2006+A11:2009

EN 60065:2002+A1:2006+A11:2008

2009/125/EC-ErP Directive

Regulation (EC) No. 1275/2008

EN 62301:2005

Regulation (EC) No. 642/2009

EN 62301:2005

Regulation (EC) No. 278/2009

EN 62301:2005

Ver. 110101

CE marking

Declaration Date: May. 04, 2011

Year to begin affixing CE marking:2011

Position : CEO

Name : Jerry Shen

Signature : __________

(

EC conformit

markin

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2. 1077(a)

Responsible Party Name:

Asus Computer International

Address: 800 Corporate Way, Fremont

, CA 94539.

Phone/Fax No: (510)739-3777/(510)608-4555

hereby declares that the product

Product Name : Motherboard

Model Number : CROSSHAIR V FORMULA

Conforms to the following specifications:

FCC Part 15, Subpart B, Unintentional Radiators

FCC Part 15, Subpart C, Intentional Radiators

FCC Part 15, Subpart E, Intentional Radiators

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Representative Person’s Name : Steve Chang / President

Signature :

Date : May. 04, 2011

Ver. 110101

EC Declaration of Conformity

We, the undersigned,

Manufacturer: ASUSTek COMPUTER INC.

Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C.

Country: TAIWAN

Authorized representative in Europe: ASUS COMPUTER GmbH

Address, City: HARKORT STR. 21-23, 40880 RATINGEN

Country: GERMANY

declare the following apparatus:

Product name : Network/Sound Card

Model name : THUNDERBOLT

conform with the essential requirements of the following directives:

2004/108/EC-EMC Directive

EN 55022:2006+A1:2007

EN 61000-3-2:2006

EN 55013:2001+A1:2003+A2:2006

EN 55024:1998+A1:2001+A2:2003

EN 61000-3-3:2008

EN 55020:2007

1999/5/EC-R &TTE Directive

EN 300 328 V1.7.1(2006-05)

EN 300 440-1 V1.4.1(2008-05)

EN 300 440-2 V1.2.1(2008-03)

EN 301 511 V9.0.2(2003-03)

EN 301 908-1 V3.2.1(2007-05)

EN 301 908-2 V3.2.1(2007-05)

EN 301 893 V1.4.1(2005-03)

EN 302 544-2 V1.1.1(2009-01)

EN 50360:2001

EN 50371:2002

EN 50385:2002

EN 301 489-1 V1.8.1(2008-04)

EN 301 489-3 V1.4.1(2002-08)

EN 301 489-4 V1.3.1(2002-08)

EN 301 489-7 V1.3.1(2005-11)

EN 301 489-9 V1.4.1(2007-11)

EN 301 489-17 V2.1.1(2009-05)

EN 301 489-24 V1.4.1(2007-09)

EN 302 326-2 V1.2.2(2007-06)

EN 302 326-3 V1.3.1(2007-09)

EN 301 357-2 V1.3.1(2006-05)

EN 302 623 V1.1.1(2009-01)

2006/95/EC-LVD Directive

EN 60950-1:2006

EN 60950-1:2006+A11:2009

EN 60065:2002+A1:2006+A11:2008

2009/125/EC-ErP Directive

Regulation (EC) No. 1275/2008

EN 62301:2005

Regulation (EC) No. 642/2009

EN 62301:2005

Regulation (EC) No. 278/2009

EN 62301:2005

Ver. 110101

CE marking

Declaration Date: Jan. 28, 2011

Year to begin affixing CE marking:2011

Position : CEO

Name : Jerry Shen

Signature : __________

(

EC conformit

markin

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2. 1077(a)

Responsible Party Name:

Asus Computer International

Address: 800 Corporate Way, Fremont

, CA 94539.

Phone/Fax No: (510)739-3777/(510)608-4555

hereby declares that the product

Product Name : Network/Sound Card

Model Number : THUNDERBOLT

Conforms to the following specifications:

FCC Part 15, Subpart B, Unintentional Radiators

FCC Part 15, Subpart C, Intentional Radiators

FCC Part 15, Subpart E, Intentional Radiators

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Representative Person’s Name : Steve Chang / President

Signature :

Date : Jan. 28, 2011

Ver. 110101

Table of Contents

ASUS Crosshair V Formula-Z User Manual

Related Manuals