be quiet! Dark Rock Pro TR4 User Manual
Displayed below is the user manual for Dark Rock Pro TR4 by be quiet! which is a product in the Computer Cooling Systems category. This manual has pages.
Related Manuals
Introduction: Thank you for deciding to purchase a be quiet!
product. The following instructions will guide you through the
installation process. If you do encounter installation problems,
please don't hesitate to contact our customer services by
mailing service@bequiet.com. Please note that be quiet!
cannot accept liability for damage caused by compatibility
problems.
Warranty:
• 3-year manufacturer guarantee for consumers (original
purchase from authorized be quiet! dealers only)
• Guarantee work can only be processed with a copy
included of the purchase receipt from an authorized
be quiet! dealer
• Manipulation and structural changes of any kind, including
any damage caused by external mechanical force, will
lead to a complete voiding of the guarantee
• Our General Warranty Conditions apply, which can be
viewed on bequiet.com
Listan GmbH & Co.KG . Biedenkamp 3a . 21509 Glinde
Germany
For further information contact us via e-mail:
service@bequiet.com
SCOPE OF DELIVERY
We recommend removal of the cooler prior to transportation.
06/2018
!
Part name Quantity
be quiet! Dark Rock Pro TR4
cooler 1
135mm fan 1
120mm fan 1
Long TR4 mounting bracket 1
Short TR4 mounting bracket 1
Cooler mounting bridge 1
2
3
4
5
6
Part name Quantity
TR4 spacer nuts 4
TR4 screws 4
Cross-tip screwdriver 1
Thermal paste 1
Fan clips 6
Y cable 1
7
8
9
10
11
12
Position the Cooler mounting bridge (6) centrally on the cooler
(1). Next place the cooler unit over the CPU. Loosen both
heatpipe caps that are found in the middle of the topside of the
cooler.
Tighten the screws of the cooler mounting bridge alternately.
You can use the cross-tip screwdriver (9) for this. Subsequently
retighten both heatpipe caps on the topside of the cooler.
Fasten the 120mm fan (3) using fan clips (11) onto the front
side of the cooler. Slide the 135mm fan (2) between the two
heatsinks and fasten this with fan clips (11). Connect both fans
using the Y cable (12). Connect this to the CPU fan connector
on the motherboard.
When dismantling the fans, push the notches of the fan clips
(11) away from the fan.
General
We recommend preparatory mounting of the
cooler outside the PC case for subsequent
installation.
Assembly of the cooler mounting frame
Place the TR4 spacer nuts (7) onto the socket bolts protruding
through the front side and affi x the long TR4 mounting bracket
(4) with the TR4 screws (8). Next assemble the opposite side
with the short TR4 mounting bracket (5) as you did before.
Mounting the CPU cooler:
First remove the protective foil from the underside of the
cooler. Spread the thermal paste (10) on the surface of the
CPU. The amount supplied is suffi cient for one or two
applications.
Caution: The thermal paste supplied is not suitable for human
consumption. If swallowed, drink lots of water and urgently
seek medical attention. Keep it out of the reach of children.
Avoid contact with skin and eyes.
AMD TR4
Installation video
Limited Warranty
As per the terms and conditions of this limited warranty as given
below, be quiet! warrants its new products to be free of defects
resulting from faulty materials and faulty manufacturing for the length
of the warranty period.
I. APPLICABILITY
This non-transferable warranty is applicable to newly purchased,
previously unopened be quiet! products and is enforceable by only
the original consumer purchaser. Proof of purchase is required for
warranty service, so should be retained. be quiet! does not provide
warranty registration services.
II. WARRANTY PERIOD
For eligible products, parts and labor are warranted for the appli-
cable warranty period from the date of purchase. The applicable
warranty period varies by product model, and is identifi ed in your
user documentation, on the product package, or as listed below.
Should any of these warranty periods diff er, the longest specifi ed
warranty period will apply. Replaced products will be warranted
for the remainder of the original warranty period or thirty days,
whichever is longer.
III. EXCLUSIONS
The following are not covered by the warranty:
1. Normal wear and tear.
2. Any product which has been modifi ed without permission from
be quiet!, or on which the serial number or warranty sticker has been
defaced, modifi ed, or removed.
3. Damage, deterioration or malfunction resulting from:
Accident, abuse, misuse or improper use, neglect, connection to
an improper voltage source, unauthorized product modifi cation, or
failure to follow instructions included with the product.
Fire, water, lightning, or other acts of nature.
Repair or attempted repair by anyone not authorized by be quiet!.
Shipping or transport damage (claims must be made with the carrier).
Any other cause which does not relate to a defect in materials or
manufacturing workmanship.
4. Cartons, cases, batteries, cabinets, tapes, accessories or other
consumables used with this product.
5. be quiet!, Inc. does not warrant that this product will meet your
requirements. It is your responsibility to determine the suitability of
this product for your purpose.
6. Removal or installation charges.
7. Shipping charges.
8. Any incidental charges.
IV. EXCLUSION OF DAMAGES
be quiet!‘s sole obligation and liability under this warranty is limited
to the repair or replacement of a defective product at its option.
be quiet! shall not, in any event, be liable for any special, incidental,
indirect, or consequential damages whatsoever, including but not
limited to loss of profi ts, revenue, or data (whether direct or indirect),
damages resulting from interruption of service and loss of business,
or for liability in tort relating to this product or resulting from its use
or possession, even if be quiet! has been advised previously of the
possibility of such damages.
V. LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied, including but not
limited to those of merchantability or fi tness for a particular purpose.
The duration of implied warranties is limited to the warranty length
specifi ed in Paragraph II.50
VI. LOCAL LAW AND YOUR WARRANTY
This warranty gives you specifi c legal rights. You may also have other
rights granted under local law. These rights may vary.
VII. NO OTHER WARRANTY
No be quiet! employee, dealer, or other agent is authorized to make
any modifi cation, extension, or addition to this warranty.
VIII. TO OBTAIN TECHNICAL SUPPORT OR WARRANTY SERVICE
Please see your product owner’s manual or visit the service section
at www.bequiet.com for details and contact information. You will
need to provide proof of purchase for warranty service.
bequiet.com
DARK ROCK PRO TR4
DARK ROCK PRO TR4
LIEFERUMFANG
Bezeichnung Anzahl
be quiet! Dark Rock Pro TR4
CPU-Kühler 1
135mm Lüfter 1
120mm Lüfter 1
Lange TR4 Montagebrücke 1
Kurze TR4 Montagebrücke 1
Kühler-Montagebrücke 1
2
3
4
5
6
Bezeichnung Anzahl
TR4 Abstandsbolzen 4
TR4 Schrauben 4
Kreuzschraubenzieher 1
Wärmeleitpaste 1
Lüfterklammern 6
Y-Kabel 1
Legen Sie die Kühler-Montagebrücke (6) mittig auf den Kühler
(1). Anschließend platzieren Sie den Kühler auf der CPU.
Drehen Sie die beiden mittig positionierten Heatpipe-Caps auf
der Oberseite des Kühlers ab.
Ziehen Sie die Schrauben der Kühler-Montagebrücke ab-
wechselnd fest. Hierzu können Sie den Kreuzschraubenzieher
(9) benutzen.
Befestigen Sie den 120mm Lüfter (3) mit Hilfe der
Lüfterklammern (11) auf der Vorderseite des Kühlers. Den
135mm Lüfter (2) schieben Sie zwischen den beiden
Kühlkörpern entlang und befestigen auch diesen mit den
Lüfterklammern (11). Verbinden Sie die beiden Lüfter über
das Y-Kabel (12) und schließen Sie dieses an den CPU
Lüfteranschluss des Mainboards an.
Zur Demontage der Lüfter drücken Sie die Kerben der
Lüfterklammern (11) vom Lüfter weg.
Allgemeines
Für die Montage des Kühlers empfehlen wir
die Installation außerhalb des Gehäuses.
Aufbau des Kühlerbefestigungsrahmens
Platzieren Sie über die Vorderseite die vier TR4 Abstands-
bolzen (7) auf die Bolzen des Sockels und fi xieren die lange
TR4 Montagebrücke (4) mit Hilfe der TR4 Schrauben (8).
Wiederholen Sie anschließend den Vorgang auf der gegen-
überliegenden Seite mit der kurzen TR4 Montagebrücke (5).
Montage des CPU-Kühlers
Entfernen Sie zunächst die Schutzfolie von der Unterseite
des Kühlers. Tragen Sie die Wärmeleitpaste (10) auf die CPU
Oberfl äche auf. Der Inhalt reicht für ca. 1 – 2 Anwendungen.
Vorsicht: Die mitgelieferte Wärmeleitpaste ist nicht zum
Verzehr geeignet. Bei Verzehr ausreichend Wasser trinken und
umgehend einen Arzt aufsuchen. Außerhalb der Reichweite
von Kindern aufbewahren. Vermeiden Sie Haut- und
Augenkontakt.
AMD TR4
Installation video
Limited Warranty
As per the terms and conditions of this limited warranty as given
below, be quiet! warrants its new products to be free of defects
resulting from faulty materials and faulty manufacturing for the length
of the warranty period.
I. APPLICABILITY
This non-transferable warranty is applicable to newly purchased,
previously unopened be quiet! products and is enforceable by only
the original consumer purchaser. Proof of purchase is required for
warranty service, so should be retained. be quiet! does not provide
warranty registration services.
II. WARRANTY PERIOD
For eligible products, parts and labor are warranted for the appli-
cable warranty period from the date of purchase. The applicable
warranty period varies by product model, and is identifi ed in your
user documentation, on the product package, or as listed below.
Should any of these warranty periods diff er, the longest specifi ed
warranty period will apply. Replaced products will be warranted
for the remainder of the original warranty period or thirty days,
whichever is longer.
III. EXCLUSIONS
The following are not covered by the warranty:
1. Normal wear and tear.
2. Any product which has been modifi ed without permission from
be quiet!, or on which the serial number or warranty sticker has been
defaced, modifi ed, or removed.
3. Damage, deterioration or malfunction resulting from:
Accident, abuse, misuse or improper use, neglect, connection to
an improper voltage source, unauthorized product modifi cation, or
failure to follow instructions included with the product.
Fire, water, lightning, or other acts of nature.
Repair or attempted repair by anyone not authorized by be quiet!.
Shipping or transport damage (claims must be made with the carrier).
Any other cause which does not relate to a defect in materials or
manufacturing workmanship.
4. Cartons, cases, batteries, cabinets, tapes, accessories or other
consumables used with this product.
5. be quiet!, Inc. does not warrant that this product will meet your
requirements. It is your responsibility to determine the suitability of
this product for your purpose.
6. Removal or installation charges.
7. Shipping charges.
8. Any incidental charges.
IV. EXCLUSION OF DAMAGES
be quiet!‘s sole obligation and liability under this warranty is limited
to the repair or replacement of a defective product at its option.
be quiet! shall not, in any event, be liable for any special, incidental,
indirect, or consequential damages whatsoever, including but not
limited to loss of profi ts, revenue, or data (whether direct or indirect),
damages resulting from interruption of service and loss of business,
or for liability in tort relating to this product or resulting from its use
or possession, even if be quiet! has been advised previously of the
possibility of such damages.
V. LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied, including but not
limited to those of merchantability or fi tness for a particular purpose.
The duration of implied warranties is limited to the warranty length
specifi ed in Paragraph II.50
VI. LOCAL LAW AND YOUR WARRANTY
This warranty gives you specifi c legal rights. You may also have other
rights granted under local law. These rights may vary.
VII. NO OTHER WARRANTY
No be quiet! employee, dealer, or other agent is authorized to make
any modifi cation, extension, or addition to this warranty.
VIII. TO OBTAIN TECHNICAL SUPPORT OR WARRANTY SERVICE
Please see your product owner’s manual or visit the service section
at www.bequiet.com for details and contact information. You will
need to provide proof of purchase for warranty service.
bequiet.com
DARK ROCK PRO TR4
DARK ROCK PRO TR4
Einleitung: Vielen Dank, dass Sie sich für ein be quiet!
Produkt entschieden haben. Diese Anleitung wird Ihnen beim
Installationsprozess behilfl ich sein. Sollten bei der Installation
Schwierigkeiten auftreten, kontaktieren Sie bitte unseren
Kundenservice unter service@bequiet.com. be quiet! kann
keinerlei Haftung für durch Kompatibilitätsprobleme bedingte
Schäden übernehmen.
Garantie:
• 3 Jahre Herstellergarantie für Endkonsumenten (nur Erst-
erwerb vom autorisierten be quiet! Händler), ab Datum des
Kaufbelegs
• Eine Garantieabwicklung ist nur in Verbindung mit einer
beigefügten Kopie des Kaufbeleges eines autorisierten
be quiet! Händlers möglich
• Manipulationen und bauliche Veränderungen jeglicher
Art, sowie Beschädigungen durch äußere mechanische
Einwirkungen führen zum totalen Garantieverlust
• Es gelten unsere allgemeinen Garantiebestimmungen, die
Sie unter www.bequiet.com im Internet abrufen können
Listan GmbH & Co. KG . Biedenkamp 3a . 21509 Glinde .
Deutschland
Für weitere Unterstützung erreichen Sie uns via E-Mail:
service@bequiet.com
Wir empfehlen den Kühler für den Transport auszubauen.
06/2018
!
7
11
12
10
9
8