Candy GSV C10TE-80 User Manual
Displayed below is the user manual for GSV C10TE-80 by Candy which is a product in the Tumble Dryers category. This manual has pages.
Related Manuals
EN
2
Index
1. SAFETY REMINDERS
2. DRAIN HOSE KIT: FITTING
INSTRUCTIONS
3. PREPARING THE LOAD
4. CLEANING AND ROUTINE
MAINTENANCE
5. WATER CONTAINER
6. DOOR AND FILTER AND CONDENSER
7. CONTROLS AND INDICATORS
8. SELECTING THE PROGRAMME AND
SET THE FUNCTION
9. TROUBLESHOOTING CUSTOMER
SERVICE
Please read and follow these nstructons
carefully a n d o p e r a t e the m a c h n e
accordngly. Ths booklet provdes mportant
gudelnes for safe use, nstallaton,
mantenance and some useful advce for best
results when using your machine.
Keep all documentation in a safe place for
future reference or for any future owners.
Please check that the followng tems are
delvered wth the applance:
● Instruction manual
● Guarantee card
● Energy label
By placng the mark on ths product,
we are confrmng complance to all relevant
European safety, health and envronmental
requrements whch are applcable n
legslaton for ths product.
Check that no damage has occurred to
the machine during transit. If it has, call for
service by GIAS. Failure to comply with the
above can compromise the safety of the
appliance. You may be charged for a service
call if a problem with your machine is caused
by misuse.
1.
SAFETY REMINDERS
This appliance can be used by
children aged from 8 years and
above and persons with
reduced physical,sensory or
mental capabilities or lack of
experience and knowledge if
t h e y h a v e b e e n g i v e n
supervision or instruction
c o n c e r n i n g u s e o f t h e
appliance in a safe way and
under stand the hazards
involved.Children shall not play
with the appliance. Cleaning and
user maintenance should not be
made by children without
supervision.Children of less than
3 years should be kept away
unless continuously supervised.
WARNING Misuse of a tumble
dryer may create a fire hazard.
This appliances is intended to be
used in household and similar
applications such as:
Staff kitchen areas in shops ,
offices and other working
environments;
Farm houses;
By clients in hotels, motels and
o t h e r r e s i d e n t i a l t y p e
environments;
Bed and breakfast type
environments.
A different use of this appliance
from household environment or
from typical housekeeping
functions,as commercial use by
expert or trained users, is
excluded even in the above
applications.
If the appliance is used in a
manner inconsistent with this
it may reduce the life of the
appliance and may void the
manufacturer’s warranty.
Any damage to the appliance
or other damage or loss
arising through use that is not
consistent with domestic or
household use ( even if
located in a domestic or
household environment)
shall not be accepted by the
manufacturer to the fullest
extent permitted by law.
● This machine should only be
used for its intended purpose
as described in this manual.
Ensure that the instructions
for installation and use are
fully understood before
operating the appliance.
● Do not touch the appliance
when hands or feet are damp
or wet.
● Do not lean on the door when
loading the machine or use
the door to lift or move the
machine.
● Do not allow children to play
with the machine or its
controls.
3
●
●
●
-
-
-
-
EN
WARNING Do not use the
product if the fluff filter is not in
position or is damaged; fluff
could be ignited.
WARNING Where the hot
surface symbol is located
the temperature rise during
operation of the tumble dryer
may be in excess of 60
degrees C.
Remove the plug from the
electricity supply. Always
remove the plug before
cleaning the appliance.
Do not continue to use this
machine if it appears to be
faulty.
Lint and fluff must not be
allowed to collect on the floor
around the outside of the
machine.
The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
The tumble dryer is not to be
used if industrial chemicals
have been used for cleaning.
WARNING: Never stop a
tumble dryer before the end of
the drying cycle unless all
items are quickly removed and
spread out so that the heat is
dissipated.
Maximum load drying weight :
see energy label.
Installation
Do not use adapters, multiple
connectors and/or extensions.
Never install the dryer against
curtains and be sure to prevent
items from falling or collecting
behind the dryer.
The appliance must not be
installed behind a lockable
door, a sliding door or a door
with a hinge on the opposite
side to that of the tumble dryer.
4
●
●
●
●
●
●
●
●
●
●
●
●
5
The Laundry
EN
The Laundry
●the tumble dryer.
●Do not tumble dry
fabrics treated with dry cleaning
fluids.
●Fo a m r u b b e r
materials can, under certain
circumstances, when heated
b e c o m e i g n i t e d b y
spontaneous combustion.
Items such as foam rubber
(latex foam), shower caps,
waterproof textiles, rubber
backed articles and clothes or
pillows fitted with foam rubber
pads MUST NOT be dried in the
tumble dryer.
●Always refer to the laundry care
labe ls fo r d ir ec ti on s on
suitability for drying.
●Clothes should be spin dried or
thoroughly wrung before they
are put into the tumble dryer.
Clothes that are dripping wet
should not be put into the dryer.
●Lighters and matches must not
be left in pockets and NEVER
use flammable liquids near the
machine.
●Glass fibre curtains should
NEVER be put in this machine.
Skin irritation may occur if other
garments are contaminated
with the glass fibres.
●Items that have been soiled
with substances such as
cooking oil, acetone, alcohol,
Do not dry unwashed items in
WARNING
WAR N IN G
Ɣ
●
Ventilation
petrol, kerosene, spot
removers, turpentine, waxes
and wax removers should be
washed in hot water with an
extra amount of detergent
before being dried in the
tumble dryer.
●
products, should be used as
specified by the fabric
softener instructions.
Fabric softeners, or similar
●
provided in the room where
the tumble dryer is located to
p r e v e n t g a s e s f r o m
appliances burning other
fuels, including open fires,
being drawn into the room
during operation of the
tumble dryer.
●Installing the rear of the
appliance close to a wall or
vertical surface.
●There should be a gap of at
least 12 mm between the
m a c h i n e a n d a n y
obstrubtions.The inlet and
outlet should be kept clear of
o b st r u c t i o n. To e ns u r e
adequate ventilation the
space between the bottom of
the machine and the floor
must not be obstructed.
●Check regularly that the air
flowing through the dryer is not
restricted.
Adequate ventilation must be
PDWFKHV
5HPRYH DOO REMHFWV IURP
SRFNHWV VXFK DV OLJKWHUV DQG
6
Do not install the product in a
low temperature room or in a
room where there is a risk of frost
occurring. At temperature around
freezing point the product may
not be able to operate properly:
there is a risk of damage if the
water is allowed to freeze in the
hydraulic circuit (valves, hoses,
pumps). For a better product
performance the ambient room
temperature must be between
5-35°C. Please note that
operating in cold condition
(between +2 and +5°C) might
simply some water condensation
and water drops on floor.
●
after use, and clean, if necessary.
●Prevent items from falling or
collecting behind the dryer as
these may obstruct the air inlet
●NEVER install the dryer up
against curtains.
Check frequently the fluff filter
In cases where the dryer is
installed on top of a washing
machine, a suitable stacking kit
must be used according to the
configuration of your appliance:
- Stacking kit "standard size":
minimum depth of 44 cm;
The stacking kit shall be
obtainable from
service.
The instructions for installation
and any fixing attachments, are
provided with the stacking kit.
●
for washing machine with
- Stacking kit "slim size":
minimum depth of 40 cm.
for washing machine with
our spare
KDVEHHQLQVWDOOHG
Ɣ
WARNING: the appliance
switched on and off by a utility.
Ɣ
and outlet.
7KHSOXJVKRXOGEHDFFHVVLEOHIRU
GLVFRQQHFWLRQ DIWHU WKHDSSOLDQFH
Air Inlet Air outlet
,IWKHVXSSO\FRUGLVGDPDJHG
LW PXVW EH UHSODFHG E\ WKH
PDQXIDFWXUHULWVVHUYLFHDJHQWRU
VLPLODUO\ TXDOLILHG SHUVRQV LQ
RUGHUWRDYRLGDKD]DUG
must not be supplied through
such as a timer, or connected
to a circuit that is regularly
an external switching device,
Environmental Issues
● All packaging materials used are
environmentally-friendly and recyclable.
Please help dispose of the packaging via
environmentally-friendly means. Your local
council will be able to give you details of
current means of disposal.
● To ensure safety when disposing of an old
tumble dryer disconnect the mains plug from
the socket, cut the mains power cable and
destroy this together with the plug. To prevent
children shutting themselves in the machine
break the door hinges or the door lock.
European Directive 2012/19/EU
This appliance is marked according
to the European directive 2012/19/EU
on Waste Electrical and Electronic
Equipment (WEEE).
WEEE contains both polluting substances (which
can cause negative consequences for the
environment) and basic components (which can
be re-used). It is important to have WEEE
subjected to specific treatments, in order to remove
and dispose properly all pollutants, and recover
and recycle all materials.
Individuals can play an important role in ensuring
that WEEE does not become an environmental
issue; it is essential to follow some basic rules:
- WEEE should not be treated as household
waste.
- WEEE should be handed over to the relevant
collection points managed by the municipality or by
registered companies. In many countries, for large
WEEE, home collection could be present.
In many countries, when you buy a new appliance,
the old one may be returned to the retailer who has
to collect it free of charge on a one-to-one basis, as
long as the equipment is of equivalent type and
has the same functions as the supplied equipment.
Electrical Requirements
Tumble dryers are supplied to operate at a
voltage of 220-240V, 50 Hz single phase.
Check that the supply circuit is rated to at least
13 A.
Electricity can be extremely dangerous.
This appliance must be earthed.
The socket outlet and the plug on the
appliance must be of the same type.
Do not use multiple adapters and/or
extension leads.
The plug should be accessible for
disconnection after the appliance has
been installed.
You may be charged for a service
call if a problem with your machine is
caused by incorrect installation.
If the mains cord on this appliance
is damaged, it must be replaced by a
special cord which is ONLY obtainable
from the spares service. It must be
installed by a competent person.
Do not plug the machine in and
switch it on at the mains until the
installation is completed.For your safety,
this dryer must be correctly installed. If
there is any doubt about installation, call
GIAS Service for advice.
GIAS Service
● To ensure the continued safe and efficient
operation of this appliance we recommend that
any servicing or repairs are only carried out by
an authorised GIAS service engineer.
Adjusting the Feet
Once the machine is
in place the feet
should be adjusted to
e n s u r e t h a t t h e
machine is level.
7
EN
2.
DRAIN HOSE : FITTING INSTRUCTIONS
FOR TANK IN DOOR DRAWER
To avoid emptying the water container after
each drying cycle, the water can be discharged
directly to a waste water drain pipe (the same
drainage system as household sinks). Water
Bye-Laws prohibit connection to a surface
water drain. The waste water drain pipe should
be located adjacent to the tumble dryer.
The kit consists of:1 hose and 1 tap.
WARNING! Switch off and remove the
tumble dryer plug from the electricity supply
before carrying out any work.
Fit the Hose as Follows:
1.Tilt the machine
backwards.
2. The waste water
pipe is situated at the
right-hand side of the
machine (see the
picture). A grey hose
connects to the bridge
at the left hand side of
the machine. Using
pliers, remove the
pipe retaining clip
from the bridge.
3. Pull the hose off the
bridge connection.
4. Attach the black
hose from the kit,
(using the connector
a n d p i p e c l i p s
supplied), to the hose
removed from the
bridge connection.
5 . P l a c e t h e t a p
supplied by the kit to
close the remaing
hose.
Connect the new drain
hose to the waste
black water pipe .
6. Once the machine is
in place, check the
bottom to ensure that
the new hose does not
kink when pushing the
tumbl e drye r i nto
position.
Connect to the mains
electricity supply.
8
1
2
3
4
5
6
3.
PREPARING THE LOAD
Before using the tumble dryer for the first time:
● Please read this instruction book thoroughly.
● Remove all items packed inside drum.
● Wipe the inside of the drum and door with a
damp cloth to remove any dust which may have
settled in transit.
Make sure that the laundry you are going to
dry is suitable for drying in a tumble dryer, as
shown by the care symbols on each item.
Check that all fastenings are closed and that
pockets are empty. Turn the articles inside out.
Place clothes loosely in the drum to make sure
that they don't get tangled.
Clothes Preparation
Do Not Tumble Dry:
Silk, nylon stockings, delicate embroidery,
fabrics with metallic decorations, garments
with PVC or leather trimmings.
IMPORTANT: Do not dry articles which
have been treated with a dry cleaning fluid or
rubber clothes (danger of fire or explosion).
During the last 15 minutes the load is always
tumbled in cool air.
Only put into the tumble dryer laundry which has
been thoroughly wrung or spin-dried. The drier
the laundry the shorter the drying time thus
saving electricity.
ALWAYS
● Check that the filter is clean before every
drying cycle.
NEVER
● Put dripping wet items into the tumble dryer,
this may damage the appliance.
Energy Saving
. .
.
● By care symbols
These can be found on the collar or inside seam:
Suitable for tumble drying.
Tumble drying at high temperature.
Tumble drying at low temperature only.
Do not tumble dry.
Sort the Load as Follows
Do not overload the drum, large items
when wet exceed the maximum
admissible clothes load (for example:
sleeping bags, duvets).
If the item does not have a care label it must
be assumed that it is not suitable for tumble
drying.
● By amount and thickness
Whenever the load is bigger than the dryer
capacity, separate clothes according to
thickness (e.g. towels from thin underwear).
● By type of fabric
Cottons/linen: Towels, cotton jersey, bed
and table linen.
Synthetics: Blouses, shirts, overalls, etc.
made of polyester or polyamid, as well as
for cotton/synthetic mixes.
4.
CLEANING AND ROUTINE
MAINTENANCE
WARNING! The Drum, door and load
may be very hot.
IMPORTANT Always switch off and
remove the plug from the electricity supply
before cleaning this appliance.
For electrical data refer to the rating
label on the front of the dryer cabinet (with
the door open).
Cleaning the Dryer
● Clean the filter and empty the water
container after every drying cycle.
● Regularly clean the condenser.
● After each period of use, wipe the inside
of the drum and leave the door open for a
while to allow circulation of air to dry it.
● Wipe the outside of the machine and the
door with a soft cloth.
● DO NOT use abrasive pads or cleaning
agents.
● To prevent the door sticking or the build
up of fluff clean the inner door and gasket
with a damp cloth after every drying cycle.
9
EN
5.
WATER CONTAINER
To remove the container
tank in door drawer
To remove the container
bottom water drawer
1. Gently pull out the
water container holding
the handle. (A)
When it is full the
water container will
weigh about 6 kg.
2. T i l t t h e w a t e r
container to empty the
water out through the
spout. (B)
When empty, replace
the water container
back as shown; (C) first
insert the base of the
container into position
as shown (1) then
gentle push the top into
position (2).
3. Press Button to
restart the cycle.
NOTE: If you have the
option of drainage near
to the dryer you can use
the discharge kit to
provide a permanent
drainage for the water
c o l l e c t e d i n t h e
container of the dryer.
This means that you
don't have to empty the
water container.
A
B
1C
10
1.Gently pull the bottom
of the kickplate so that it
unclips from the dryer.
The top section can
th e n b e u n hi n ge d
allowing the kickplate to
b e c o m p l e t e l y
removed. (A)
2.Pull firmly on the
handgrip and slide the
water container out of
the dryer. (B)
Support the container
w i t h b o t h h a n d s .
(C)When full, the water
container will weigh
about 4kg.
3. Open the lid located
on the top of the
container and empty
the water.(D)
4. Refit the lid and slide
the water container
back into position. (D)
PUSH FIRMLY INTO
PLACE.
5. Refit the kickplate by
engaging the hinges at
the top and 'snapping'
the lower clips into
place.
A
B
C
D
The water removed from the laundry during the drying cycle is collected in a containe
the container is full the indicator on the control panel will light, an
emptied. However, we recommend that the container is emptied after each drying cycle.
NOTE: Very little water will collect during the first few cycles of a new machine as an internal
reservoir is filled first.
r. When
bed the container MUST
6.
DOOR and FILTER
Pull on handle to open the door.
To restart the dryer, close the door and press
Start / Pause button.
WARNING! When the tumble dryer is in
use the drum and door may be VERY HOT.
Filter
IMPORTANT: To maintain the efficiency of
the dryer check that the fluff filter is clean
before each drying cycle.
1. P u l l t h e f i l t e r
upwards.
2. Open filter as shown.
3. Gently remove lint
using a soft brush or
your fingertips.
4. S n a p t h e f i l t e r
together and push
back into place.
1
2
Filter Care Indicator
Lights when the filter needs cleaning.
If the laundry is not drying check that the filter
is not clogged.
IF YOU CLEAN FILTER UNDER
WATER, REMEMBER TO DRY IT.
WARNING! If you open the door mid
cycle, before the cool-down cycle has
completed,the handle may be hot. Please use
extreme caution when attempting to empty
the water reservoir during the cycle.
11
To Remove the Condenser
1.Remove the kickplate.
2.Turn the two locking
levers anti-clockwise
and p ull o ut the
condenser.
3.Pull out the condenser
unit.
4.Gently remove any
dust or fluff with a
cloth, then wash the
unit by holding it under
a running tap turning it
so that water flows
between the plates, to
remove any dust or
fluff.
5.Check the gasket
p o s i t i o n a f t e r
c l e a n i n g . F i t t h e
gasket in to the groove
if it is misaligned.
6.Refit the condenser
ensuring it is in the
c o r r e c t w a y ( a s
i nd i c a t e d b y t h e
arrow) and pushed
firmly into place. Lock
the two levers by
t u r n i n g t h e m
clockwise.Be sure
that condenser unit
fixed to the basement
tightly.
7. Refit the kickplate.
UP
EN
Clean the filters before every cycle
7.
CONTROLS AND
INDICATORS
12
A
E
1
765432
8
BD
C
A-Programme Selector - Rotating the knob
in both directions it's possible to select the
desired drying program. To cancel the
selections or switch off the dryer rotate the
knob on OFF.
B- Display Digit - The display shows the
remaining time for drying, the postponed
time in case of delayed start selection and
other notifications setting.
C-Buttons -
1.Start/Pause Button - To start the selected
program and/or suspend it.
2. Super Easy Iron - This option allows to
reduce folds and tangles, thanks to
alternating movements of the drum during
and after drying and automatically, setting
the ironi drying level (the drying level setting
can be modified after the option selection).
The option can be set up to five minutes after
the start of the cycle and is activated only on
automatic cycles.
3.Rapids Button - It's possible switch an
automatic program to RAPID program, up to
3 minutes after the start of the cycle. The
progressive pressure increases the time (30-
45-59 minutes).
After this selection to reset the automatic
drying functioning is necessary to switch off
the dryer. In case of incompatibility, all LEDs
flash quickly for 3 times.
4.Drying Selection Button
It allows to set the desired dryness level
editable option up to 5 minutes after the
starting of the cycle:
- Ready to Iron : It leaves the garments
slightly wet to facilitate ironing.
- Dry Hanger : To get garment ready to be
hang
- Dry wardrobe : For laundry that can be
directly stored
-Extra-dry : To get completely dry
garments, ideal for full load.
This appliances is equipped with Drying
Manager Function. On automatic cycles,
each level of intermediate drying, prior to the
reaching the selected one, is indicated by
flashing the light indicator corresponding to
the degree of drying
5.Delay Start Button - It allows to delay the
start of the program from 1 to 24 hours in 1-
hour intervals. The delay selected is shown
on the display.
After pressing the START button the time showed
decrease hour after hour.
Opening of the porthole with delayed start set,
after re-closing the porthole, press start again to
resume the counting.
6.Memory - This option allows you to
store the options set on a cycle.
STORAGE When the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
Recall: After the selection of the cycle Push the
button "memory" for recall the stored options.
(not the cycle)
7.Time cycle selection - It's possible transform
a cycle from automatic to programmed, up to 3
minutes after the start of the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic functioning is necessary to
switch off the dryer. In case of incompatibility, all
LEDs flash quickly for 3 times.
8.Keylock - This function allows to block
unwanted changes of the set options on the
bezel , during drying phase.
Activation/ Inactivation: Push 4 and 5 buttons
simultaneously for two seconds . The sign
"LOC" appears on the display. Unlocking the
option, on the display appears the sign "Unl",
only once. In case of opening of 'porthole' with
activated key lock, the cycle stops but the lock
is kept: to restart the cycle, you must remove
the lock and restore Start. When the dryer is
off, the option is automatically inactivated.Key
lock can be modified at any time of the cycle.
drying
reached.
The wool drying cycle of this
m a c h i n e h a s b e e n
approved by The Woolmark
Company for the drying of
machine washable wool
products provided that the
products are washed and
dried according to the instructions on the
garment label and those issues by the
manufacturer of this machine M1524.
In UK, Eire, Hong Kong and India the Woolmark
trade mark is a Certification trade mark.
Drying Guide
The standard cycle COTTON DRY ( ) is the
most energy efficient and best suited for drying
normal wet cotton laundry.
The table in last page shows the approximate time
and energy consumption of the main drying
programmes.
Technical Specifications
Drum capacty 125
Maxmum load See energy label
Heght 85 cm
Wdth 60 cm
Depth 60 cm
Energy class See energy label
EN 61121 Programme To Use
-DRY COTTON - COTTON OR
-COTTON OR WHITES
-DELICATES OR SYNTHETIC
-IRON DRY COTTON
-EASY-CARE TEXTILE
Information for Test Laboratory
D- Led
Water tank - It lights up when it's necessary
to empty the condensate water tank.
Filter cleaning - It lights up when the
cleaning of the filters is requested (the door and
the lower filter).
Cooling - It lights up when the cycle is in the
final cooling phase.
TOUCH area - pressing the
START/PAUSE button allows to a previously
downloaded cycle to start whilst the Touch
position is selected on the programme knob
(for downloading cycles from the App see the
relevant section of this user manual).
13
Max.capacity declared
Max.4 Kg
Maximum Drying Weight
Cottons
Synthetics or Delicates
The real duration of drying cycle
depends by the starting humidity level of
the laundry due to spin speed, type and
amount of load, cleanliness of filters and
ambient temperature.
OPERATION
1. Open the door and load the drum
with laundry. Ensure that garments do
not hinder closure of the door.
2. Gently close the door pushing it
slowly until you hear the door 'click'
shut.
3. Turn the Programme Selector dial to
select the required drying programme
(see Programme Guide).
4. Press the button. The dryer will
start automatically and the indicator
above the button will be continuously
lit.
5. If the door is opened during the
programme to check the laundry, it is
necessary to press to recommence
drying after the door has been closed.
6. W h e n t h e c y c l e i s n e a r i n g
completion the machine will enter the
cool down phase, the clothes will be
tumbled in cool air allowing the load to
cool down.
7. Following the completion of the
cycle the drum will rotate intermittently
to mi nim ize crea sin g . This will
continue until the machine is switched
OFF or the door is opened.
Do not open the door during the automatic
programs in order to obtain a proper drying.
Automatic Anti crease
This option automatically activates an anti-
creases movement of the drum, pre cycle in
case of activation of the delay and at the end
of drying cycle for 6 hours. It is activated
every 10 minutes. To stop the movements
set the knob to OFF.
Useful when it's not possible to remove
immediately the laundry.
0,40 W
0,75 W
Power consumption of off-mode
Power consumption of on-mode
EN
E- SMART
8.
SELECTING THE PROGRAMME AND SET THE FUNCTION
14
PROGRAM
PROGRAM DESCRIPTION
DRYING
TIME
(min)
CAPACITY
(kg)
The right cycle to dry cottons, sponges and towels.
Program Eco normative (hang dry) drying. The most efficient
program in energy consumption. Suitable for cottons and linens.
To dry all together different kind of fabrics as
mix, synthetics.
Perfect cycle to dry uniformly duvets and quilts, revitalizing the
smoothness of the feathers.
Specific cycle dedicated to dry huge linens size like curtains,
sheets and tableclothes. Thanks to a specifics movement of the
drum the linens will be dry minimazing tangles and folds.
The perfect cycle to remove the bad smells from the linens
smoothing creases.
This is a warm cycle that in only 12 minutes helps to relaxe folds
and creases.
This specifics cycle has been conceived to dry shirts minimizing
tangles and folds thanks specific movements of the drum. It's
recommended to take out the linens immediately after drying cycle.
To dry delicate and synthetic fabrics that need an accurate
and specific treatment.
Dedicated to dry uniformly fabrics like jeans or denim. It's
recommended flip over the garments before drying.
Dedicated to technical garments for sport and fitness, drying
gently with special care to avoid shrinking and deterioration
of elastic fibers.
Woolen clothes: the program can be used to dry up to 1 kg of
laundry (around 3 jumpers). It is recommended to reverse all
clothes before drying. Timing can change due to dimensions
and thickness of load and to spinning chosen during
washing. At the end of the cycle, clothes are ready to be
worn, but if they are heavier, edges can be a bit wet: it is
suggested to dry them naturally. It is recommended to
unload clothes at the very end of the cycle. Attention: felting
process of wool is irreversible; please dry exclusively clothes
with symbol (symbol "ok tumble"); this program is not
indicated for acrylic clothes.
One specifics cycle that dry and in the same time helps to
reduce the main allergens as dustmites, pet hair, pollens and
residual of powder detergents.
Customizable setting that interacts with the App on your android smartphone and to download
the cycles (see the dedicated section). The factory sets the default programme Auto-Hygiene,
which will sanitize the machine.
Full
4
4
2.5
4
4
4
4
1
4
6
2.5
2.5
*
*
*
*
*
*
*
*
*
70’
220’
220’
*
*
* The real duration of drying cycle depends by the starting humidity level of the laundry due to spin speed, type
and amount of load, cleanliness of filters and ambient temperature.
A delicate and specific cycle to dry dark or colour cotton or
synthetics garments.
Full
cotton , linen,
15
SMART TOUCH
This appliance is equipped with Smart Touch
technology that allows you to interact, via the
App, with smartphones based on Android
operating system and equipped with NFC
(Near Field Communication) function.
● Download on your smartphone the Candy
simply-Fi App.
The Candy simply-Fi App is available
for devices running both Android
and iOS, both for tablets and for
smartphones. However, you can
interact with the machine and take
advantage of the potential offered by
Smart Touch only with Android
smartphones equipped with NFC
technology, according to following
functional scheme:
Android smartphone
with NFC technology
Interaction with the
machine + contents
Android smartphone
without NFC technology Contents only
Android Tablet
Apple iPhone
Apple iPad
Contents only
Contents only
Contents only
FUNCTIONS
The main functions available using the App
are:
● Voice Assistant – A guide to help you
choose the ideal cycle with only three voice
inputs (clothes/fabrics, colour, drying level).
● Cycles – To download and launch new
drying programmes.
Get all the details of the Smart Touch
functions, browsing the App in DEMO
mode or go to:
www.candysmarttouch.com
HOW TO USE SMART TOUCH
FIRST TIME - Machine registration
Enter the "Settings" menu of your
Android smartphone and activate the
NFC function inside the "Wireless &
Networks" menu.
Depending on the smartphone model
and its Android OS version, the
process of the NFC activation may be
different. Refer to the smartphone
manual for more details.
● Turn the knob to the Smart Touch
position to enable the sensor on the
dashboard.
● Open the App, create the user profile
and register the appliance following the
instructions on the phone display or the
"Quick Guide" attached on the machine.
More information, F.A.Q. and the video
for an easy registration are available
on:
www.candysmarttouch.com/how-to
● Smart Care – -Smart Check-up and a
troubleshooting guide.
● My Statistics – Drying statistics and
tips for a more efficient use of your
machine.
EN
16
NEXT TIME – Regular usage
● Every time you want to manage the
machine through the App, first you have to
enable the Smart Touch mode by turning
the knob to the Smart Touch indicator.
● Make sure you have unlocked your phone
(from stand-by mode) and you have
activated the NFC function; then, follow the
steps mentioned earlier.
● If you want to start a dry cycle, load
the laundry and close the door.
● Select the desired function in the App (e.g.:
starting a programme, the Smart Check-
up cycle, update statistics, etc…).
● Follow the instructions on the phone
display, KEEPING IT ON the Smart Touch
logo on the machine dashboard, when
requested to do so by the App.
NOTES:
Place your smartphone so that the NFC
antenna on its back matches the position
of the Smart Touch logo on the appliance
(as illustrated below).
If you do not know the position of your NFC
antenna, slightly move the smartphone in a
circular motion over the Smart Touch logo
until the App confirms the connection. In
order for the data transfer to be successful,
it is essential TO KEEP THE SMARTPHONE
ON THE DASHBOARD DURING THESE
FEW SECONDS OF THE PROCEDURE; a
message on the device will inform about the
correct outcome of the operation and advise
you when it is possible to move the
smartphone away.
Thick cases or metallic stickers on your
smartphone could affect or prevent the
transmission of data between machine
and telephone. If necessary, remove them.
The replacement of some components of
the smartphone (e.g. back cover, battery,
etc...) with non-original ones, could result
in the NFC antenna removal, preventing
the full use of the App.
The management and the control of the
machine via App is only possible "by
proximity": it is therefore not possible to
perform remote operations (e.g.: from
another room; outside of the house).
WIRELESS PARAMETERS
With this the Candy Hoover Group Srl,
declares that this appliance marked with
complies with the essential
requirements of the Directive 2014/53/EU.
To receive a copy of the declaration of
c o n f o r m i t y, p l e a s e c o n t a c t t h e
manufacturer at:
www.candy-group.com
Wireless Standard
ISO/IEC 14443 Type A and NFC Forum Type 4
Frequency band
Magnetic field limit
13,553-13,567 MHz (centre frequency 13,560 MHz)
< 42dBμA/m (at 10 meters)
Parameter
Specifications
17
9.
TROUBLESHOOTING
What Might be the Cause of...
Defects you can remedy yourself
Before calling service for technical advice please
run through the following checklist. A charge will
be made if the machine is found to be working or
has been installed incorrectly or used incorrectly.
If the problem persists after completing the
recommended checks, please call Service, they
may be able to assist you over the telephone.
Time display to end could change during
drying cycle. The time to end is continuously
checked during the drying cycle and the time
is adjusted to give the best estimation time.
The displayed time may increase or decrease
during the cycle and this is normal.
Drying time is too long/clothes are not dry
enough…
● Have you selected the correct drying
time/programme?
● Were the clothes too wet? Were the clothes
thoroughly wrung or spindried?
● Does the filter need cleaning?
● Is the dryer overloaded?
The dryer does not operate…
● Is there a working electricity supply to the
dryer? Check using another appliance such as a
table lamp.
● Is the plug properly connected to the mains
supply?
● Is there a power failure?
● Has the fuse blown?
● Is the door fully closed?
● Is the dryer switched on, both at the mains
supply and at the machine?
● Has the drying time or the programme been
selected?
● Has the machine been switched on again after
opening the door?
The dryer is noisy…
● Switch off the dryer and contact GIAS
Service for advice.
The Indicator is on…
● Does the filter need cleaning?
The Indicator is on…
● Does the water container need
emptying?
CUSTOMER SERVICE
Should there still be a problem with your
dr y e r a f t er c o mp l e ti n g a l l th e
recommended checks, please call
service for advice.
They may be able to assist you over the
telephone or arrange for a suitable
appointment for an engineer to call under
the terms of your guarantee. However, a
charge may be made if any of the
following applies to your machine:
● Is found to be in working order.
● Has not been installed in accordance
with the installation instructions.
● Has been used incorrectly.
Spares
Service
Always use genuine spares, available
direct from service.
For service and repairs call your local
service engineer.
The manufacturer declines all
responsibility in the event of any
printing mistakes in this booklet. The
manufacturer also reserves the right
to make appropriate modifications to
its products without changing the
essential characteristics.
FOR SMART TOUCH MODELS
The Candy simply-Fi app has a Smart Check-up function that allows you to confirm the
functionality and status of the product at any time. To use the Candy simply-Fi APP you will need
an Android smartphone with NFC technology.
More info can be found on the App.
If the display of the machine is showing an error (by a code or blinking LEDs), you should turn on the
App on your Android smartphone, with NFC on, selecting "Read the error" on the "Help on line"
menu place your smart phone against the Smart Touch logo on the control panel. You should now
be able to read the fault directory to solve the issue.
EN
40014036
Energy Capacity Time
Capacity (kg) 6 7 8 9 10
Class B B B B B
Energy kWh 4,44 5,04 5,64 6,24 6,80
Time Min. 170 191 214 225 230
Energy kWh 4,18 4,75 5,31 5,88 6,44
Time Min. 148 166 185 205 210
Energy kWh 3,70 4,20 4,70 5,20 5,70
Time Min. 126 141 157 176 195
Energy kWh 2,05 2,31 2,56 2,80 3,00
Time Min. 77 84 91 100 108
Energy kWh 2,96 3,36 3,76 4,16 4,56
Time Min. 104 116 129 144 159
Capacity (kg) 6 7 8 9
Class C C C C
Energy kWh 4,86 5,46 6,06 6,65
Time Min. 184 207 229 230
Energy kWh 4,58 5,14 5,71 6,26
Time Min. 160 179 199 210
Energy kWh 4,05 4,55 5,05 5,54
Time Min. 136 152 168 190
Energy kWh 2,26 2,52 2,77 3,01
Time Min. 84 89 97 107
Energy kWh 3,24 3,64 4,04 4,43
Time Min. 112 125 137 155
Whites
Whites
Whites
Whites
Cotton
Cotton
Cotton
Cotton
½
½
Whites
Whites