EOS 2000D
Introduction
Getting Started
Basic Shooting and Image Playback
Creative Shooting
Advanced Shooting
Shooting with the LCD Monitor (Live View Shooting)
Shooting Movies
Handy Features
Image Playback
Post-Processing Images
- Applying Creative Filters
- Resizing JPEG Images
Printing Images
Customizing the Camera
Reference
Software Start Guide / Downloading Images to a Computer

Canon EOS 2000D 18-55 DC + SB130 + 16GB User Manual

Displayed below is the user manual for EOS 2000D 18-55 DC + SB130 + 16GB by Canon which is a product in the Digital Cameras category. This manual has pages.

Related Manuals

Canon EOS 200D + 18-55 DC III + 100EG + SD 16GB Manual

Canon EOS 2000D + 18-55 IS Kit Manual

Trust 18552 Manual

Canon 2000D + EF-S 18-55 IS II + EF 50mm Manual

Instruction manuals (PDF files) and software can be

downloaded from the Canon website (p.4, 315).

www.canon.com/icpd

Instruction Manual

ENGLISH

The EOS 2000D is a digital single-lens reflex camera featuring

a fine-detail CMOS sensor with approx. 24.1 effective megapixels,

DIGIC 4+, high-precision and high-speed 9-point AF, approx.

3.0 shots/sec. continuous shooting, Live View shooting,

Full High-Definition (Full HD) movie shooting, and Wi-Fi/NFC

(wireless communication) function.

Before Starting to Shoot, Be Sure to Read the Following

To avoid botched pictures and accidents, first read the “Safety

Instructions” (p.20-22) and “Handling Precautions” (p.23-25). Also,

read this manual carefully to ensure that you use the camera correctly.

Refer to This Manual while Using the Camera to Further

Familiarize Yourself with the Camera

While reading this manual, take a few test shots and see how they

come out. You can then better understand the camera. Be sure to store

this manual safely, too, so that you can refer to it again when necessary.

Testing the Camera Before Use and Liability

After shooting, play images back and check whether they have been

properly recorded. If the camera or memory card is faulty and the

images cannot be recorded or downloaded to a computer, Canon

cannot be held liable for any loss or inconvenience caused.

Copyrights

images or copyrighted music and images with music in the memory

card for anything other than private enjoyment. Also be aware that

certain public performances, exhibitions, etc. may prohibit photography

even for private enjoyment.

Introduction

Before starting, check that all the following items are included with your

camera. If anything is missing, contact your dealer.

* Battery Charger LC-E10E comes with a power cord.

The camera does not come with the Software CD-ROM, an interface cable

or HDMI cable.

The Instruction Manuals provided are listed on the next page.

If you purchased a Lens Kit, check that the lenses are included.

Be careful not to lose any of the above items.

For items sold separately, see the System Map (p.278).

Item Check List

Battery Pack LP-E10

(with protective cover)

Battery Charger

LC-E10E*

Strap

Camera

(with eyecup and body cap)

When you need Lens Instruction Manuals, download them from the Canon

website (p.4).

The Lens Instruction Manuals (PDF) are for lenses sold individually. Note

that when purchasing the Lens Kit, some of the accessories included with

the lens may not match those listed in the Lens Instruction Manual.

Software can be downloaded from the Canon website (p.315) for your use.

Quick Reference Guide

The booklet describes the basic operations.

More detailed Instruction Manuals (PDF files) can be

downloaded from the Canon website.

1Download the Instruction Manuals (PDF files).

Connect to the Internet and access the following Canon website.

www.canon.com/icpd

Select your country or region of residence and download the

Instruction Manuals.

Instruction Manuals Available for Download

• Camera Instruction Manual

• Wireless Function Instruction Manual

• Quick Reference Guide

• Lens Instruction Manuals

• Software Instruction Manuals

2View the Instruction Manuals (PDF files).

Double-click the downloaded Instruction Manual (PDF file) to

open it.

To view the Instruction Manuals (PDF files), Adobe Acrobat

Reader DC or other Adobe PDF viewer (most recent version

recommended) is required.

Adobe Acrobat Reader DC can be downloaded for free from the

Internet.

To learn how to use PDF viewing software, refer to the software’s

Help section.

Instruction Manuals

Downloading and Viewing the Instruction Manuals (PDF Files)

The following cards can be used with the camera regardless of

capacity: If the card is new or was previously formatted by another

camera or computer, it is recommended that you format the card

with this camera (p.52).

• SD memory cards

• SDHC memory cards

• SDXC memory cards

When shooting movies, use a large-capacity SD card rated SD

Speed Class 6 “ ” or higher.

If you use a slow-writing card when shooting movies, the movie may

not be recorded properly. Also, if you play back a movie on a card

with a slow reading speed, the movie may not play back properly.

To check the card’s writing/reading speed, refer to the card

manufacturer’s website.

Compatible Cards

Cards that Can Record Movies

The camera can use UHS-I cards, but since it is not compatible with the

UHS-I standard, writing/reading speeds will be equivalent to SD Speed

Class 10 at most.

In this manual, “card” refers to SD memory cards, SDHC memory

cards, and SDXC memory cards.

*The camera does not come with a card for recording images/

movies. Please purchase it separately.

Quick Start Guide

1Insert the battery (p.36).



To charge the battery, see page 34.

2Insert the card (p.36).



With the card’s label facing toward

the back of the camera, insert it into

the card slot.

3Attach the lens (p.44).



Align the lens’s white or red mount

index with the camera’s mount index

of the same color to attach the lens.

4Set the lens’s focus mode

switch to <AF> (p.44).

5Set the power switch to <1>

(p.39).



When the LCD monitor displays the

date/time/zone setting screen, see

page 41.

White index Red index

Quick Start Guide

6Set the Mode Dial to <A>

(Scene Intelligent Auto) (p.58).

All the necessary camera settings

will be set automatically.

7Focus on the subject (p.47).

Look through the viewfinder and

aim the viewfinder center over the

subject.



Press the shutter button halfway, and

the camera will focus on the subject.

If necessary, the built-in flash will be

raised.

8Take the picture (p.47).

Press the shutter button completely

to take the picture.

9Review the picture.

The captured image will be

displayed for approx. 2 sec. on the

LCD monitor.

To display the image again, press

the <x> button (p.83).

To shoot while looking at the LCD monitor, see “Live View

Shooting” (p.139).

To view the images captured so far, see “Image Playback” (p.83).

To delete an image, see “Erasing Images” (p.230).

Icons in this Manual

<6> : Indicates the Main Dial.

<W><X><Y><Z> : Indicates the <S> cross keys on the top,

bottom, left, and right.

<0> : Indicates the Setting button.

0, 9, 7, 8: Indicates that each function remains active for

approx. 4 sec., 6 sec., 10 sec., or 16 sec. after

you let go of the button.

* In addition to the above, the icons and symbols used on the camera’s buttons

and displayed on the LCD monitor are also used in this manual when discussing

relevant operations and functionality.

3: Indicates a function that can be changed by pressing the

<M> button to change its settings.

M: This icon at the upper right of the page titles indicates that

the function is available only in the Creative Zone modes

(p.30).

(p.**) : Reference page numbers for more information.

: Warning to prevent shooting problems.

: Supplemental information.

: Tips or advice for better shooting.

: Troubleshooting advice.

Basic Assumptions and Sample Photos

All operations explained in this manual assume that the power switch

is set to <1> (p.39).

It is assumed that all the menu settings and Custom Functions are

set to their defaults.

The illustrations in this manual show the camera attached with the

EF-S18-55mm f/3.5-5.6 IS II lens as an example.

The sample photos used in this manual are only for illustrative

purposes to show the effects more clearly.

Conventions Used in this Manual

Chapters

Introduction 2

Getting Started 33

Basic Shooting and Image Playback 57

Creative Shooting 85

Advanced Shooting 107

Shooting with the LCD Monitor (Live View

Shooting) 139

Shooting Movies 159

Handy Features 183

Image Playback 207

Post-Processing Images 235

Printing Images 241

Customizing the Camera 257

Reference 269

Software Start Guide /

Downloading Images to a Computer 313

Contents at a Glance

Shooting

Shoot automatically  p.57-82 (Basic Zone modes)

Shoot continuously  p.102 (i Continuous shooting)



Take a picture of yourself in a group

 p.103 (j Self-timer)

Freeze the action  p.108 (s Shutter-priority AE)

Blur the action

Blur the background  p.64 (C Creative Auto)



Keep the background in sharp focus

 p.110 (f Aperture-priority AE)



Adjust the image brightness (exposure)

 p.116 (Exposure compensation)

Shoot in low light  p.58, 104 (D Flash photography)

p.92 (ISO speed setting)

Shoot without flash  p.63 (7 Flash Off)

 p.75 (b Flash Off)

Shoot fireworks at night  p.114 (Bulb exposure)



Shoot while viewing the LCD monitor

 p.139 (A Live View shooting)

Shoot movies  p.159 (k Movie shooting)

Image Quality

Shoot with image effects  p.95 (Picture Style)

matching the subject



Make a large-size print of the picture

 p.88 (73, 83, 1)

Take many pictures  p.88 (7a, 8a, b, c)

Focusing

Change the point of focus  p.99 (S AF point selection)

Shoot a moving subject  p.70, 98 (AI Servo AF)

Playback

View the images on the camera  p.83 (x Playback)

Search for pictures quickly  p.208 (H Index display)

p.209 (I Image browsing)

Rate images  p.212 (Ratings)

Prevent important images  p.228 (K Image protect)

from accidental deletion

Delete unnecessary images  p.230 (L Delete)



Auto play back photos and movies

 p.222 (Slide show)



View the photos or movies on a TV set

 p.226 (TV set)



Adjust the LCD monitor brightness

 p.185 (LCD monitor brightness)

Apply special effect to images  p.236 (Creative filters)

Printing

Print pictures easily  p.241 (Direct printing)

Power

Battery

• Charging  p.34

• Installing/Removing  p.36

• Battery level  p.40

Household power outlet  p.270

Auto power off  p.39

Cards

Installing/Removing  p.36

Formatting  p.52

Release shutter

without card  p.184

Lens

Attaching/Detaching  p.44

Zoom  p.45

Basic Settings

Dioptric adjustment  p.46

Language  p.43

Date/Time/Zone  p.41

Beeper  p.184

LCD off/on button  p.197

LCD brightness

adjustment  p.185

Recording Images

Creating/Selecting

a folder  p.186

File numbering  p.188

Image Quality

Image-recording quality  p.88

Picture Style  p.95

White balance  p.131

Color space  p.137

Image enhancement features

• Auto Lighting Optimizer  p.123

• Lens peripheral

illumination correction  p.124

• Noise reduction for

long exposures  p.262

• Noise reduction for

high ISO speeds  p.263

• Highlight tone priority  p.263

AF operation  p.97

AF point selection  p.99

Manual focusing  p.101

Drive

Drive mode  p.28

Continuous shooting  p.102

Self-timer  p.103

Maximum burst  p.90

Shooting

Shooting mode  p.30

ISO speed  p.92

Feature guide  p.55

Bulb  p.114

Metering mode  p.115

Quick Control  p.48

Index to Features

Exposure

Exposure compensation  p.116

AEB  p.118

AE lock  p.120

Flash

Built-in flash  p.104

• Flash exposure

compensation  p.117

• FE lock  p.121

External flash  p.272

Flash control  p.198

Live View Shooting

Live View shooting  p.139

Autofocusing (AF)

methods  p.148

Aspect ratio  p.146

Grid  p.145

Quick Control  p.144

Movie Shooting

Movie shooting  p.159

Sound recording  p.178

Grid  p.179

Manual exposure  p.162

Quick Control  p.167

Video snapshot  p.170

Playback

Image review time  p.184

Single-image display  p.83

Shooting information

display  p.232

Index display  p.208

Image browsing

(Jump display)  p.209

Magnified view  p.210

Image rotate  p.211

Rating  p.212

Movie playback  p.218

Editing out movie’s

first/last scene  p.220

Slide show  p.222

Viewing images on a

TV set  p.226

Protect  p.228

Erase  p.230

Quick Control  p.214

Image Editing

Creative filters  p.236

Resize  p.239

Printing

PictBridge  p.244

Print Order (DPOF)  p.251

Photobook Set-up  p.255

Customization

Custom Functions (C.Fn)  p.258

My Menu  p.267

Software

Software Start Guide  p.314

Software Instruction

Manuals  p.316

Wireless Functions

Wireless Function Instruction

Manual

Introduction 2

Item Check List................................................................................. 3

Instruction Manuals .......................................................................... 4

Compatible Cards............................................................................. 5

Quick Start Guide ............................................................................. 6

Conventions Used in this Manual..................................................... 8

Chapters........................................................................................... 9

Contents at a Glance...................................................................... 10

Index to Features ........................................................................... 12

Safety Instructions.......................................................................... 20

Handling Precautions ..................................................................... 23

Nomenclature ................................................................................. 26

Getting Started 33

Charging the Battery ...................................................................... 34

Installing and Removing the Battery and Card............................... 36

Turning on the Power ..................................................................... 39

Setting the Date, Time, and Zone................................................... 41

Selecting the Interface Language................................................... 43

Attaching and Detaching a Lens..................................................... 44

Basic Operation.............................................................................. 46

Q Quick Control for Shooting Functions ....................................... 48

3 Menu Operations.................................................................. 50

Formatting the Card ....................................................................... 52

Switching the LCD Monitor Display ................................................ 54

Feature Guide ................................................................................ 55

Contents

2Basic Shooting and Image Playback 57

A Fully Automatic Shooting (Scene Intelligent Auto) ...................58

A Full Auto Techniques (Scene Intelligent Auto)..........................61

7 Disabling Flash .........................................................................63

C Creative Auto Shooting.............................................................64

2 Shooting Portraits ......................................................................67

3 Shooting Landscapes ...............................................................68

4 Shooting Close-ups....................................................................69

5 Shooting Moving Subjects ........................................................70

P Shooting Food ............................................................................71

6 Shooting Night Portraits .............................................................72

Q Quick Control.............................................................................74

Shooting with Ambience Selection..................................................76

Shooting by Lighting or Scene Type ...............................................80

x Image Playback ........................................................................83

Creative Shooting 85

d: Program AE...............................................................................86

Setting the Image-Recording Quality ..............................................88

i: Changing the ISO Speed to Suit the Light Level.....................92

A Selecting Optimal Image Characteristics for the Subject

(Picture Style)..................................................................................95

f: Changing the Autofocus Operation (AF operation)..................97

S Selecting the AF Point ..............................................................99

Subjects Difficult to Focus on........................................................101

MF: Manual Focus .....................................................................101

i Continuous Shooting ...............................................................102

j Using the Self-timer .................................................................103

D Using the Built-in Flash .............................................................104

Contents

4Advanced Shooting 107

s: Conveying the Subject’s Movement ..................................... 108

f: Changing the Depth of Field .................................................110

Depth-of-Field Preview ...............................................................112

a: Manual Exposure ....................................................................113

q Changing the Metering Mode ..................................................115

Setting Exposure Compensation...................................................116

Auto Exposure Bracketing.............................................................118

A Locking the Exposure ............................................................. 120

A Locking the Flash Exposure.................................................... 121

Auto Correction of Brightness and Contrast

(Auto Lighting Optimizer).............................................................. 123

Correcting the Image’s Dark Corners........................................... 124

A Customizing Image Characteristics (Picture Style) .............. 126

Registering Preferred Image Characteristics (Picture Style)

... 129

B: Matching the Light Source (White balance)......................... 131

u Adjusting the Color Tone for the Light Source......................... 135

Setting the Color Reproduction Range (Color space) .................. 137

Shooting with the LCD Monitor (Live View Shooting)

139

A Shooting with the LCD Monitor .............................................. 140

Shooting Function Settings .......................................................... 144

Menu Function Settings................................................................ 145

Using AF to Focus (AF Method)................................................... 148

MF: Focusing Manually ................................................................ 156

Contents

6Shooting Movies 159

k Shooting Movies .....................................................................160

Autoexposure Shooting..............................................................160

Manual Exposure Shooting ........................................................162

Shooting Function Settings ...........................................................167

Setting the Movie Recording Size.................................................168

Shooting Video Snapshots............................................................170

Menu Function Settings ................................................................176

Handy Features 183

Handy Features ............................................................................184

Disabling the Beeper..................................................................184

Card Reminder...........................................................................184

Setting the Image Review Time .................................................184

Setting the Auto Power-off Time ................................................185

Adjusting the LCD Monitor Brightness .......................................185

Creating and Selecting a Folder.................................................186

File Numbering Methods ............................................................188

Setting Copyright Information.....................................................190

Auto Rotation of Vertical Images ................................................192

Checking Camera Settings ........................................................193

Reverting the Camera to the Default Settings............................194

Turning the LCD Monitor Off/On ................................................197

Changing the Shooting Settings Screen Color...........................197

Setting the Flash ...........................................................................198

Appending Dust Delete Data ........................................................202

Manual Sensor Cleaning...............................................................204

Contents

8Image Playback 207

x Searching for Images Quickly ................................................ 208

u/y Magnified View ................................................................... 210

b Rotating the Image...................................................................211

Setting Ratings ............................................................................. 212

Q Quick Control for Playback ..................................................... 214

k Enjoying Movies ..................................................................... 216

k Playing Back Movies .............................................................. 218

X Editing a Movie’s First and Last Scenes ................................. 220

Slide Show (Auto Playback) ......................................................... 222

Viewing Images on a TV Set ........................................................ 226

K Protecting Images................................................................... 228

L Erasing Images........................................................................ 230

B Shooting Information Display............................................... 232

Post-Processing Images 235

U Applying Creative Filters......................................................... 236

S Resizing JPEG Images........................................................... 239

Printing Images 241

Preparing to Print.......................................................................... 242

w Printing................................................................................... 244

Cropping the Image ................................................................... 249

W Digital Print Order Format (DPOF) ......................................... 251

W Direct Printing of Print-Ordered Images ................................. 254

p Specifying Images for a Photobook ......................................... 255

Contents

Customizing the Camera 257

Setting Custom Functions.............................................................258

Custom Function Settings.............................................................260

C.Fn I: Exposure ........................................................................260

C.Fn II: Image ............................................................................262

C.Fn III: Autofocus/Drive ............................................................264

C.Fn IV: Operation/Others..........................................................265

Registering My Menu....................................................................267

Reference 269

Using a Household Power Outlet..................................................270

F Using a Remote Switch.............................................................271

External Speedlites .......................................................................272

H Using Eye-Fi Cards .................................................................273

Function Availability Table by Shooting Mode...............................276

System Map ..................................................................................278

Menu Settings...............................................................................280

Troubleshooting Guide..................................................................286

Error Codes...................................................................................298

Specifications ................................................................................299

Software Start Guide /

Downloading Images to a Computer 313

Software Start Guide.....................................................................314

Downloading and Viewing the Software Instruction Manuals

(PDF Files)....................................................................................316

Downloading Images to a Computer.............................................317

Index .............................................................................................319

Be sure to read these instructions in order to operate the product safely.

Follow these instructions to prevent injury or harm to the operator of the

product or others.

Safety Instructions

WARNING: Denotes the risk of serious injury or death.

Keep the product out of the reach of young children.

A strap wrapped around a person’s neck may result in strangulation.

The parts or provided items of cameras or accessories are dangerous if swallowed. If

swallowed, seek immediate medical assistance.

The battery is dangerous if swallowed. If swallowed, seek immediate medical

assistance.

Use only power sources specified in this instruction manual for use with the product.

Do not disassemble or modify the product.

Do not expose the product to strong shocks or vibration.

Do not touch any exposed internal parts.

Stop using the product in any case of unusual circumstances such as the presence

of smoke or a strange smell.

Do not use organic solvents such as alcohol, benzine or paint thinner to clean the

product.

Do not get the product wet. Do not insert foreign objects or liquids into the product.

Do not subject the product to high water pressure or get it wet with large quantities of

liquids. Do not insert foreign objects or liquids into the product.

Do not insert foreign objects or liquids into the product.

Do not use the product where flammable gases may be present.

This may cause electric shock, explosion or fire.

Do not leave a lens or a camera with a lens attached, exposed without the lens cap

attached.

The lens may concentrate the light and cause fire.

Do not look through the viewfinder at strong light sources such as the sun on a bright

day or lasers and other strong artificial light sources.

This may harm your vision.

Do not touch the product connected to a power outlet during lightning storms.

This may cause electric shock.

Observe the following instructions when using commercially available batteries or

provided battery packs.

• Use batteries/battery packs only with their specified product.

• Do not heat batteries/battery packs or expose them to fire.

• Do not charge batteries/battery packs using non-authorized battery chargers.

• Do not expose the terminals to dirt or let them come into contact with metallic pins

or other metal objects.

• Do not use leaking batteries/battery packs.

• When disposing of batteries/battery packs, insulate the terminals with tape or

other means.

This may cause electric shock, explosion or fire.

If a battery/battery pack leaks and the material contacts your skin or clothing, flush the

exposed area thoroughly with running water. In case of eye contact, flush thoroughly

with copious amounts of clean running water and seek immediate medical assistance.

Safety Instructions

Observe the following instructions when using a battery charger or AC adapter.

• Periodically remove any dust buildup from the power plug and power outlet using a

dry cloth.

• Do not plug in or unplug the product with wet hands.

• Do not use the product if the power plug is not fully inserted into the power outlet.

• Do not expose the power plug and terminals to dirt or let them come into contact

with metallic pins or other metal objects.

Do not touch the battery charger or AC adapter connected to a power outlet during

lightning storms.

Do not place heavy objects on the power cord. Do not damage, break or modify the

power cord.

Do not wrap the product in cloth or other materials when in use or shortly after use

when the product is still warm in temperature.

Do not unplug the product by pulling the power cord.

Do not leave the product connected to a power source for long periods of time.

Do not charge batteries/battery packs at temperatures outside the range of 6 - 40 °C

(43 - 104 °F).

This may cause electric shock, explosion or fire.

Do not allow the product to maintain contact with the same area of skin for extended

periods of time during use.

This may result in low-temperature contact burns, including skin redness and blistering,

even if the product does not feel hot. The use of a tripod or similar equipment is

recommended when using the product in hot places and for people with circulation

problems or less sensitive skin.

Follow any indications to turn off the product in places where its use is forbidden.

Not doing so may cause other equipment to malfunction due to the effect of

electromagnetic waves and even result in accidents.

To prevent fire, excessive heat, chemical leakage, explosions, and electrical shock,

follow the safeguards below:

• Do not insert the battery’s plus and minus ends incorrectly.

Do not leave any cords near a heat source.

It can deform the cord or melt the insulation and cause a fire or electrical shock.

Do not fire the flash at anyone driving a car or other vehicle.

It may cause an accident.

Do not use or store the equipment in dusty or humid places. Likewise, keep the

battery away from metallic items and store it with its protective cover attached to

prevent short-circuit.

This is to prevent fire, excessive heat, electrical shock, and burns.

To prevent a fire and electrical shock, follow the safeguards below:

• Do not connect too many power plugs to the same power outlet.

• Do not use a cord whose wire is broken or insulation is damaged.



Do not connect the battery directly to an electrical outlet or a car’s cigarette lighter outlet.

The battery may leak, generate excessive heat or explode, causing fire, burns, or injuries.

A thorough explanation of how to use the product by an adult is required when the

product is used by children. Supervise children while they are using the product.

Incorrect usage may result in electrical shock or injury.

Safety Instructions

CAUTION: Denotes the risk of injury.

Do not fire the flash near the eyes.

It may hurt the eyes.

Strap is intended for use on the body only. Hanging the strap with any product

attached on a hook or other object may damage the product. Also, do not shake the

product or expose the product to strong impacts.

Do not apply strong pressure on the lens or allow an object to hit it.

This may cause injury or damage to the product.

Flash emits high temperatures when fired. Keep fingers, any other part of your body,

and objects away from the flash unit while taking pictures.

This may cause burns or malfunction of the flash.

Do not leave the product in places exposed to extremely high or low temperatures.

The product may become extremely hot/cold and cause burns or injury when touched.

Only mount the product on a tripod that is sufficiently sturdy.

Do not carry the product when it is mounted on a tripod.

This may cause injury or may result in an accident.

Do not look at the screen or through the viewfinder for prolonged periods of time.

This may induce symptoms similar to motion sickness. In such a case, stop using the

product immediately and rest for a while before resuming use.

Do not touch any parts inside the product.

This may cause injury.

Camera Care

This camera is a precision instrument. Do not drop it or subject it to physical

shock.

The camera is not waterproof and cannot be used underwater. If you

accidentally drop the camera into water, promptly consult the nearest Canon

Service Center. Wipe off any water droplets with a dry and clean cloth. If the

camera has been exposed to salty air, wipe it with a well-wrung wet cloth.

Never leave the camera near anything having a strong magnetic field such

as a magnet or electric motor. Also, avoid using or leaving the camera near

anything emitting strong radio waves, such as a large antenna. Strong

magnetic fields can cause camera misoperation or destroy image data.

Do not leave the camera in excessive heat, such as in a car in direct

sunlight.

The camera contains precision electronic circuitry. Never attempt to

disassemble the camera yourself.

Do not block the built-in flash or mirror operation with your finger, etc. Doing

so may cause a malfunction.

Use only a commercially-available blower to blow away dust when it adheres

to the lens, viewfinder, reflex mirror, focusing screen, etc. Do not use

cleaners that contain organic solvents to clean the camera body or lens. For

stubborn dirt, take the camera to the nearest Canon Service Center.

Do not touch the camera’s electrical contacts with your fingers. This is to

prevent the contacts from corroding. Corroded contacts may cause camera

misoperation.

If the camera is suddenly brought in from the cold into a warm room,

condensation may form on the camera and internal parts. To prevent

condensation, first put the camera in a sealed plastic bag and let it adjust to

the warmer temperature before taking it out of the bag.

Handling Precautions

If condensation forms on the camera, do not use the camera. This is to avoid

damaging the camera. If there is condensation, remove the lens, card and

battery from the camera, and wait until condensation has evaporated before

using the camera.

If the camera will not be used for an extended period, remove the battery

and store the camera in a cool, dry, well-ventilated location. Even while the

camera is in storage, press the shutter button a few times once in a while to

check that the camera is still working.

Avoid storing the camera where there are chemicals that result in rust and

corrosion such as in a chemical lab.

If the camera has not been used for an extended period, test all its functions

before using it. If you have not used the camera for some time or if there is

an important shoot such as a foreign trip coming up, have the camera

checked by your nearest Canon Service Center or check the camera

yourself and make sure it is working properly.

If you use continuous shooting, Live View shooting, or movie shooting for a

prolonged period, the camera may become hot. This is not a malfunction.

If there is a bright light source inside or outside the image area, ghosting

may occur.

LCD Monitor

Although the LCD monitor is manufactured with very high precision

technology with over 99.99% effective pixels, there may be a few dead pixels

displaying only black or red, etc. among the remaining 0.01% or less pixels.

Dead pixels are not a malfunction. They do not affect the images recorded.

If the LCD monitor is left on for a prolonged period, screen burn-in may occur

where you see remnants of what was displayed. However, this is only

temporary and will disappear when the camera is left unused for a few days.

The LCD monitor display may seem slow in low temperatures, or look black

in high temperatures. It will return to normal at room temperature.

Handling Precautions

Cards

To protect the card and its recorded data, note the following:

Do not drop, bend, or wet the card. Do not subject it to excessive force,

physical shock, or vibration.

Do not touch the card’s electronic contacts with your fingers or anything

metallic.

Do not affix any stickers, etc. on the card.

Do not store or use the card near anything that has a strong magnetic field,

such as a TV set, speakers, or magnets. Also avoid places prone to having

static electricity.

Do not leave the card in direct sunlight or near a heat source.

Store the card in a case, etc.

Do not store the card in hot, dusty, or humid locations.

Lens

After detaching the lens from the camera, put down the lens

with the rear end up and attach the rear lens cap to avoid

scratching the lens surface and electrical contacts.

Smudges Adhering to the Front of the Sensor

Besides dust entering the camera from outside, in rare

cases lubricant from the camera’s internal parts may adhere

to the front of the sensor. If smudges are visible on the

images, having the sensor cleaned by a Canon Service

Center is recommended.

Contacts

26
* Used for wireless connections via the NFC function.
Nomenclature
Red-eye 
reduction/
Self-timer lamp 
(p.106/103)
Mode Dial (p.30)
Power switch (p.39)
<D> Flash button 
(p.104)
<6> Main Dial
Shutter button 
(p.47)
Grip
Mirror (p.204)
Contacts (p.25)
Lens mount
Lens lock pin
Built-in flash/AF-assist beam emitter 
(p.104/100)
EF Lens mount index (p.44)
EF-S Lens mount index (p.44)
Hot shoe
Microphone 
(p.160, 178)
<V> Focal plane 
mark (p.69)
Speaker 
(p.218)
Strap mount 
(p.33)
p (N-Mark)*
Terminal cover
Lens release button 
(p.45)
Remote control terminal (p.271)
Digital terminal (p.242, 317)
HDMI mini OUT terminal (p.226)
Body cap (p.44)

27
Nomenclature
<A> Live View shooting/
Movie shooting button (p.140/160)
Dioptric adjustment knob (p.46)
Eyecup (p.271)
Viewfinder eyepiece
LCD monitor 
(p.50, 185)
<O/L> Aperture/
Exposure compensation button/
Erase button (p.113/116/230)
<Q> Quick Control 
button (p.48)
Tripod socket
<M> Menu button (p.50)
<x> Playback button (p.83)
<0> Setting button (p.50)
<W><X><Y><Z>: <S> Cross keys (p.50)
<Wi> ISO speed setting button (p.92)
<XB> White balance selection button (p.131)
<Yi/j> Drive/Self-timer selection button 
(p.102-103)
<Zf> AF operation selection button (p.97)
Battery compartment (p.36)
<B> Display button 
(p.54, 83, 142, 164, 193)
<A/Hy> AE lock/
FE lock button/Index/
Reduce button 
(p.120/121/208/210, 249)
<S/u> AF point 
selection button/
Magnify button 
(p.99/210, 249)
DC cord hole 
(p.270)
Card slot/Battery 
compartment cover (p.36)
Card slot/Battery compartment 
cover release lever (p.36)
Card slot (p.36)
Access lamp (p.38)
<k> Wi-Fi lamp
Serial number

Nomenclature

Shooting Function Settings (in Creative Zone modes, p.30)

The display will show only the settings currently applied.

c Main Dial pointer (p.107)

Shooting mode

Exposure level indicator

Exposure

compensation

amount (p.116)

AEB range (p.118)

Picture Style (p.95)

AF operation (p.97)

One-Shot AF

AI Focus AF

AI Servo AF

MF:

Manual Focus

Quick Control icon

(p.48, 74)

Battery level (p.40)

zxcn

White balance (p.131)

QAuto: Ambience priority

Auto: White priority

WDaylight

EShade

RCloudy

YTungsten light

UWhite fluorescent light

IFlash

OCustom

Drive/self-timer (p.102-103)

uSingle shooting

iContinuous shooting

jSelf-timer: 10 sec.

lSelf-timer: 2 sec.

qSelf-timer: Continuous

Shutter speed

Aperture

Auto Lighting Optimizer (p.123)

ISO speed (p.92)

Highlight tone priority

(p.263)

y Flash exposure

compensation (p.117)

0 External flash

exposure compensation

Raise built-in flash (p.49)

Image-recording quality

(p.88)

73 Large/Fine

83 Large/Normal

74 Medium/Fine

84 Medium/Normal

7aSmall 1/Fine

8aSmall 1/Normal

bSmall 2 (Fine)

cSmall 3 (Fine)

1+73

RAW+Large/Fine

1RAW

Possible shots

Possible shots during white

balance bracketing

Self-timer countdown

u White balance correction (p.135)

B White balance bracketing (p.136)

Metering mode (p.115)

q Evaluative metering

w Partial metering

Center-weighted average metering

GPS connection indicator (p.282)

Eye-Fi transmission status (p.273)

Nomenclature

Viewfinder Information

The display will show only the settings currently applied.

Focusing screen

<A> AE lock/

AEB in-progress

<D> Flash-ready

FE lock out of range

warning

<e> High-speed sync

(FP flash)

<d> FE lock/

FEB in-progress

<y> Flash exposure

compensation

Shutter speed

FE lock (FEL)

Busy (buSY)

Built-in flash recycling (D buSY)

Card full warning (FuLL)

Card error warning (Card)

No card warning (Card)

AF point activation indicator <•>

AF point

ISO speed

White balance

correction

<o> Focus indicator

Maximum burst

<0> Monochrome

shooting

ISO speed

<A> Highlight tone priority

Exposure level indicator

Exposure compensation amount

AEB range

Red-eye reduction lamp ON

Aperture

Nomenclature

Mode Dial

The Mode Dial includes the Basic Zone modes, Creative Zone modes,

and the Movie shooting mode.

Creative Zone

These modes give you more control for

shooting various subjects as desired.

d: Program AE (p.86)

s: Shutter-priority AE (p.108)

f: Aperture-priority AE (p.110)

a: Manual exposure (p.113)

Basic Zone

All you do is press the shutter

button. The camera sets everything

to suit the subject or scene for

shooting.

A: Scene Intelligent Auto (p.58)

7: Flash Off (p.63)

C: Creative Auto (p.64)

Image Zone

2: Portrait (p.67)

3: Landscape (p.68)

4: Close-up (p.69)

5: Sports (p.70)

P: Food (p.71)

6: Night Portrait (p.72)

k: Movie Shooting

(p.159)

Nomenclature

Battery Charger LC-E10E

Charger for Battery Pack LP-E10 (p.34).

Power cord

Power cord socket

Battery pack slot

Charge lamp

Full-charge lamp

Getting Started

This chapter explains preparatory steps before you start

shooting and basic camera operations.

Attaching the Strap

Pass the end of the strap through

the camera’s strap mount eyelet

from the bottom. Then pass it

through the strap’s buckle as shown

in the illustration. Pull the strap to

take up any slack and make sure

the strap will not loosen from the

buckle.

The eyepiece cover is attached to

the strap (p.271).

Eyepiece cover

1Remove the protective cover.

Detach the protective cover provided

with the battery.

2Attach the battery.

As shown in the illustration, attach the

battery securely to the charger.

To detach the battery, follow the

above procedure in reverse.

3Recharge the battery.

Connect the power cord to the

charger and insert the plug into a

power outlet.

Recharging starts and the charge

lamp lights up in orange.

When the battery is fully recharged,

the full-charge lamp will light up in

green.

It takes approx. 2 hours to fully recharge a completely

exhausted battery at room temperature (23°C / 73°F). The time

required to recharge the battery will vary greatly depending on

the ambient temperature and the battery’s remaining capacity.

For safety reasons, recharging in low temperatures (6°C - 10°C /

43°F - 50°F) will take longer (up to approx. 4 hours).

Charging the Battery

Upon purchase, the battery is not fully charged.

Charge the battery before use.

Recharge the battery on the day before or on the day it is to be

used.

Even during storage, a charged battery will gradually drain and lose

its capacity.

After recharging the battery, detach it and disconnect the

charger from the power outlet.

When not using the camera, remove the battery.

If the battery is left in the camera for a prolonged period, a small

amount of power current is released, resulting in excess discharge

and shorter battery life. Store the battery with the protective cover

(provided) attached. Storing the battery when it is fully charged may

lower the battery’s performance.

The battery charger can also be used in foreign countries.

The battery charger is compatible with a 100 V AC to 240 V AC 50/

60 Hz power source. If necessary, attach a commercially-available

plug adapter for the respective country or region. Do not attach any

portable voltage transformer to the battery charger. Doing so can

damage the battery charger.

If the battery becomes exhausted quickly even after being fully

charged, the battery has reached the end of its service life.

Purchase a new battery.

Tips for Using the Battery and Charger

After disconnecting the charger’s power plug, do not touch the prongs for

at least 3 sec.

Do not charge any battery other than a Battery Pack LP-E10.

Battery Pack LP-E10 is dedicated to Canon products only. Using it with

an incompatible battery charger or product may result in malfunction or

accidents for which Canon cannot be held liable.

Load a fully charged Battery Pack LP-E10 into the camera. You can use

an SD, SDHC, or SDXC memory card (sold separately) with the

camera. The captured images are recorded onto the card.

Make sure the card’s write-protect switch is set upward to

enable writing and erasing.

1Open the cover.

Slide the lever as shown by the

arrows and open the cover.

2Insert the battery.

Insert the end with the electrical

contacts.

Insert the battery until it locks in

place.

3Insert the card.

As shown by the illustration, face

the card’s label side toward the

back of the camera and insert it

until it clicks in place.

4Close the cover.

Press the cover until it snaps shut.

When you set the power switch to

<1>, the number of possible shots

will be displayed on the LCD monitor.

Installing and Removing the Battery and Card

Installing the Battery and Card

Write-protect switch

Possible shots

Installing and Removing the Battery and Card

1Set the power switch to <2>

(p.39).

2Open the cover.

Make sure the access lamp is off,

then open the cover.

If [Recording...] is displayed, close

the cover.

3Remove the battery.

Press the battery lock lever as shown

by the arrow and remove the battery.

To prevent short circuiting of the

electrical contacts, be sure to attach

the provided protective cover (p.34)

to the battery.

4Remove the card.

Gently push in the card, then let it go

to eject.

Pull the card straight out.

5Close the cover.

Press the cover until it snaps shut.

Removing the Battery and Card

After opening the card slot/battery compartment cover, be careful not to

forcefully swing it back further. Otherwise, the hinge may break.

The number of possible shots depends on the remaining capacity of the

card, image-recording quality, ISO speed, etc.

Setting [z1: Release shutter without card] to [Disable] will prevent

you from shooting without a card inserted (p.184).

Installing and Removing the Battery and Card

When the access lamp is lit or blinking, it indicates that images are

being written to, read from, or erased from the card, or data is being

transferred. Do not open the card slot/battery compartment cover.

Also, never do any of the following while the access lamp is lit or

blinking. Otherwise, it can damage the image data, card, or camera.

• Removing the card.

• Removing the battery.

• Shaking or banging the camera around.

• Unplugging and connecting a power cord (when household power

outlet accessories (sold separately, p.270) are used).

If the card already contains recorded images, the image number may not

start from 0001 (p.188).

If a card-related error message is displayed on the LCD monitor, remove

and reinsert the card. If the error persists, use a different card.

If you can transfer all the images on the card to a computer, transfer all

the images and then format the card with the camera (p.52). The card

may then return to normal.

Do not touch the card’s contacts with your fingers or metal objects. Do

not expose the contacts to dust or water. If a smudge adheres to the

contacts, contact failure may result.

Multimedia cards (MMC) cannot be used (card error will be displayed).

If you turn on the power and the date/time/zone setting screen

appears, see page 41 to set the date/time/zone.

<1> : The camera turns on.

<2> : The camera is turned off and

does not function. Set to this

position when not using the

camera.

To save battery power, the camera turns off automatically after

approx. 30 seconds of non-operation. To turn on the camera again,

just press the shutter button halfway (p.47).

You can change the auto power off time with [51: Auto power off]

(p.185).

Turning on the Power

3 Auto Power Off

If you set the power switch to <2> while an image is being recorded to

the card, [Recording...] will be displayed and the power will turn off after the

recording finishes.

Turning on the Power

When the power is turned on, the battery level will be indicated in one of

the four levels.

z: Battery level is sufficient.

x: Battery level is low, but the

camera can still be used.

c: Battery will be exhausted soon.

(Blinks)

n: Recharge the battery.

Number of Possible Shots with Viewfinder Shooting

The figures above are based on a fully-charged Battery Pack LP-E10, no Live

View shooting, and CIPA (Camera & Imaging Products Association) testing

standards.

z Battery Level Indicator

Temperature Room Temperature

(23°C / 73°F)

Low Temperatures

(0°C / 32°F)

No Flash Approx. 600 shots Approx. 580 shots

50% Flash Use Approx. 500 shots Approx. 410 shots

Doing any of the following will exhaust the battery faster:

• Pressing the shutter button halfway for a prolonged period.

• Activating the AF frequently without taking a picture.

• Using the lens Image Stabilizer.

• Using the LCD monitor frequently.

• Using the Wi-Fi function.

The number of possible shots may decrease depending on the actual

shooting conditions.

The lens operation is powered by the camera’s battery. Some lenses

may exhaust the battery faster than others.

For the number of possible shots with Live View shooting, see page 141.

When you turn on the power for the first time or if the date/time/zone

have been reset, the date/time/zone setting screen will appear. Follow

the steps below to set the time zone first. Set the camera to the time

zone in which you currently live so that, when you travel, you can simply

change the setting to the correct time zone for your destination, and the

camera will automatically adjust the date/time.

Note that the date/time appended to recorded images will be based

on this date/time setting. Be sure to set the correct date/time.

1Display the menu screen.

Press the <M> button to display

the menu screen.

2Under the [52] tab, select [Date/

Time/Zone].

Press the <Y> <Z> keys to select

the [52] tab.

Press the <W> <X> keys to select

[Date/Time/Zone], then press <0>.

3Set the time zone.

[London] is set by default.

Press the <Y> <Z> keys to select

the time zone box.

Press <0> so <a> is displayed.

Press the <W> <X> keys to select

the time zone, then press <0>.

(Returns to .)

3 Setting the Date, Time, and Zone

The menu setting procedure is explained on pages 50-51.

In step 3, the time displayed on the upper right of the screen is the time

difference compared with Coordinated Universal Time (UTC). If you do

not see your time zone, set the time zone while referring to the difference

with UTC.

3 Setting the Date, Time, and Zone

4Set the date and time.

Press the <Y> <Z> keys to select

the number.

Press <0> so <a> is displayed.

Press the <W> <X> keys to set the

number, then press <0>. (Returns

to .)

5Set the daylight saving time.

Set it if necessary.



Press the <

> <

> keys to select [

Press <0> so <a> is displayed.

Press the <W> <X> keys to select

[Z], then press <0>.

When the daylight saving time is set

to [Z], the time set in step 4 will

advance by 1 hour. If [Y] is set, the

daylight saving time will be canceled

and the time will go back by 1 hour.

6Exit the setting.

Press the <Y> <Z> keys to select

[OK], then press <0>.

The date/time/zone and daylight

saving time will be set and the menu

will reappear.

The date/time/zone settings may be reset in the following cases. If this

happens, set the date/time/zone again.

• When the camera is stored without the battery.

• When the camera’s battery becomes exhausted.

• When the camera is exposed to below freezing temperatures for a

prolonged period.

The date/time that was set will start from when you press <0> in step 6.



After changing the time zone, check that the correct date and time are set.

1Display the menu screen.

Press the <M> button to display

the menu screen.

2Under the [52] tab, select

[LanguageK].

Press the <Y> <Z> keys to select

the [52] tab.

Press the <W> <X> keys to select

the [LanguageK], then press <0>.

3Set the desired language.

Press the <W> <X> and <Y> <Z>

keys to select the language, then

press <0>.

The interface language will change.

3 Selecting the Interface Language

The camera is compatible with all Canon EF and EF-S lenses. The

camera cannot be used with EF-M lenses.

1Remove the caps.

Remove the rear lens cap and the

body cap by turning them as shown

by the arrows.

2Attach the lens.

Align the lens’s red or white index

with the camera’s index matching the

same color. Turn the lens as shown

by the arrow until it clicks in place.

3Set the lens’s focus mode switch

to <AF>.

<AF> stands for autofocus.

If it is set to <MF> (manual focus),

autofocus will not operate.

4Remove the front lens cap.

Attaching and Detaching a Lens

Attaching a Lens

White index

Red index

Tips for Avoiding Smudges and Dust

When changing lenses, do it quickly in a place with minimal dust.

When storing the camera without a lens attached, be sure to attach the

body cap to the camera.

Remove dust on the body cap before attaching it.

Attaching and Detaching a Lens

Turn the zoom ring on the lens

with your fingers.

If you want to zoom, do it before

focusing. Turning the zoom ring after

achieving focus may throw off the

focus.

While pressing the lens release

button, turn the lens as shown by

the arrow.



Turn the lens until it stops, then detach it.

Attach the rear lens cap to the

detached lens.

Zooming

Detaching the Lens

Do not look at the sun directly through any lens. Doing so may cause

loss of vision.

When attaching or detaching a lens, set the camera’s power switch

to <2>.

If the front part (focusing ring) of the lens rotates during autofocusing, do

not touch the rotating part.

If you use a TS-E lens, certain shift and rotation functions may be

restricted, and attaching or detaching the lens may also be restricted.

If you use a TS-E lens and shift or tilt the lens or use an Extension Tube,

the standard exposure may not be obtained or the exposure may be

irregular.

Angle of View

Since the image sensor size is

smaller than the 35mm film

format, the angle of view of an

attached lens will be

equivalent to that of a lens with

approx. 1.6x of the focal length

indicated.

Image area (Approx.)

(22.3 x 14.9 mm / 0.88 x 0.59 in.)

35mm film format

(36 x 24 mm / 1.42 x 0.94 in.)

Turn the dioptric adjustment

knob.

Turn the knob left or right so that the

AF points (nine boxes) in the

viewfinder look the sharpest.

If the knob is difficult to turn, remove

the eyecup (p.271).

To obtain sharp images, hold the camera still to minimize camera shake.

1. Wrap your right hand around the camera grip firmly.

2. Hold the lens bottom with your left hand.

3. Rest your hand’s right index finger lightly on the shutter button.

4. Press your arms and elbows lightly against the front of your body.

To maintain a stable stance, place one foot slightly ahead of the other.

6. Press the camera against your face and look through the viewfinder.

Basic Operation

Adjusting the Viewfinder Clarity

Holding the Camera

If the camera dioptric adjustment still cannot provide a sharp viewfinder

image, using E-series Dioptric Adjustment Lenses (sold separately) is

recommended.

Vertical shooting

Horizontal shooting

To shoot while looking at the LCD monitor, see page 139.

Basic Operation

The shutter button has two steps. You can press the shutter button

halfway. Then you can further press the shutter button completely.

Pressing Halfway

This activates autofocusing and the

automatic exposure system that sets the

shutter speed and aperture.

The exposure setting (shutter speed and

aperture) is displayed in the viewfinder

(0).

While you press the shutter button

halfway, the LCD monitor will turn off

(p.197).

Pressing Completely

This releases the shutter and takes the

picture.

Preventing Camera Shake

Hand-held camera movement during the moment of exposure is called

camera shake. It can cause blurred pictures. To prevent camera shake,

note the following:

• Hold and steady the camera as shown on the preceding page.

• Press the shutter button halfway to autofocus, then slowly press the

shutter button completely.

Shutter Button

If you press the shutter button completely without pressing it halfway

first, or if you press the shutter button halfway and then press it

completely immediately, the camera will take a moment before it takes

the picture.

Even during menu display, image playback, or image recording, you can

instantly go back to shooting-ready by pressing the shutter button

halfway.

You can directly select and set the shooting functions displayed on the

LCD monitor. This is called Quick Control.

1Press the <Q> button.

The Quick Control screen will appear

(7).

2Set the desired function.

Press the <S> cross keys to select a

function.

The settings of the selected function

and Feature guide (p.55) will appear.

Turn the <6> dial to change the

setting.

You can also select from a list by

selecting a function and pressing

<0>.

3Take the picture.

Press the shutter button completely to

take the picture.

The captured image will be displayed.

Q Quick Control for Shooting Functions

Basic Zone modes Creative Zone modes

For the functions settable in Basic Zone modes and their setting

procedures, see page 74.

Q Quick Control for Shooting Functions

Select the desired function and press

<0>. The function’s setting screen

will appear.

Press the <Y> <Z> keys or turn the

<6> dial to change some of the

settings. Also, some functions can be

set by pressing the button.

Press <0> to finalize the setting and

return to the Quick Control screen.

Sample Quick Control Screen

Function Setting Screen

Shutter speed (p.108)

Flash exposure

compensation (p.117)

AF operation (p.97)

Shooting mode* (p.30) Highlight tone priority* (p.263)

Auto Lighting Optimizer

(p.123)

Metering mode (p.115)

Exposure compensation/

AEB setting (p.116, 118)

Picture Style (p.95)

ISO speed (p.92)

Image-recording quality

(p.88)

Aperture (p.110)

Raise built-in flash

White balance (p.131)

Drive/self-timer (p.102-103)

Functions marked with an asterisk * cannot be set with the Quick

Control.

When you select <s> and press <0>, the built-in flash will be raised.

<0>



You can set various settings with the menus such as the image-

recording quality, date and time, etc.

3 Menu Operations

<S> cross keys

LCD monitor

<0> button

The menu tabs and items displayed will differ depending on the

shooting mode.

Menu Screen

Creative Zone modes

<M> button

Basic Zone modes Movie shooting mode

Menu items

Menu settings

zShooting

5Set-up

9My Menu

3Playback

Tab

3 Menu Operations

1Display the menu screen.

Press the <M> button to display

the menu screen.

2Select a tab.



Press the <

> <

> cross keys to

select a tab (group of functions).



For example, in this manual, “the [

]

tab” refers to the screen displayed

when the third

(Shooting) tab from

the left [

] is selected.

3Select the desired item.

Press the <W> <X> cross keys to

select the item, then press <0>.

4Select the setting.



Press the <

> <

> or <

> <

cross keys to select the desired setting.

(Some settings are selected with the

> and <

> keys, and others are

selected with the <

> and <

> keys.)



The current setting is indicated in blue.

5Set the desired setting.

Press <0> to set it.

6Exit the setting.

Press the <M> button to return to

the shooting function settings display.

Menu Setting Procedure

In step 2, you can also turn the <6> dial to select a menu tab.

The explanation of menu functions hereafter assumes that you have

pressed the <M> button to display the menu screen.

To cancel the operation, press the <M> button.

For details about each menu item, see page 280.

If the card is new or was previously formatted by another camera or

computer, format the card with this camera.

1Select [Format card].

Under the [51] tab, select [Format

card], then press <0>.

2Format the card.

Select [OK], then press <0>.

The card will be formatted.

When the formatting is completed,

the menu will reappear.

For low-level formatting, press the

<L> button to add a checkmark [X]

to [Low level format], then select

[OK].

3 Formatting the Card

When the card is formatted, all images and data on the card will be

erased. Even protected images will be erased, so make sure there is

nothing you need to keep. Make sure to transfer the indispensable

data to a computer, etc. before formatting the card.

3 Formatting the Card

The card is new.

The card was formatted by a different camera or a computer.

The card is full with images or data.

A card-related error is displayed (p.298).

Format the card in the following cases:

Low-level Formatting

Perform low-level formatting if the card’s recording or reading speed seems

slow or if you want to totally erase data on the card.

Since low-level formatting will format all recordable sectors on the card, the

formatting will take slightly longer than normal formatting.

You can stop the low-level formatting by selecting [Cancel]. Even in this

case, normal formatting will already be complete and you can use the card

as usual.

When the card is formatted or data is erased, only the file management

information is changed. The actual data is not completely erased. Be aware

of this when selling or discarding the card. When discarding the card,

execute low-level formatting or destroy the card physically to prevent the

personal data from being leaked.

The card capacity displayed on the card format screen may be smaller

than the capacity indicated on the card.

This device incorporates exFAT technology licensed from Microsoft.

The LCD monitor can display the shooting settings screen, menu

screen, captured images, etc.

When you turn on the power, the

shooting settings will be displayed.

When you press the shutter button

halfway, the display will turn off.

And when you let go of the shutter

button, the display will turn on.

You can also turn off the display by

pressing the button. Press

the button again to turn on the

display.

Switching the LCD Monitor Display

Shooting Function Settings

Appears when you press the

<M> button. Press the

button again to return to the

shooting settings screen.

Appears when you press the

<x> button. Press the button

again to return to the shooting

settings screen.

Menu Functions Captured Image

You can set [52: LCD off/on btn] so that the shooting settings display

does not keep turning off and on (p.197).

Even when the menu screen or captured image is displayed, pressing

the shutter button will enable you to shoot immediately.

The Feature guide appears when you change the shooting mode or set

a shooting function, Live View shooting, movie shooting, or Quick

Control for playback, and it displays a brief description of that mode,

function or option. It displays the description when you select a function

or option with the Quick Control. The Feature guide turns off when you

further proceed with any operation.

Shooting mode (Sample)

Quick Control (Sample)

Select [Feature guide].

Under the [52] tab, select [Feature

guide], then press <0>.

Select [Disable], then press <0>.

Feature Guide

3 Disabling the Feature Guide

Shooting settings Live View shooting Playback

Basic Shooting and

Image Playback

This chapter explains how to use the Basic Zone modes

on the Mode Dial for best results and how to play back

images.

With Basic Zone modes, all you do is point and shoot while the

camera sets everything automatically (p.75, 276). Also, to

prevent botched pictures due to mistaken operations,

advanced shooting function settings cannot be changed.

Auto Lighting Optimizer

In Basic Zone modes, the Auto Lighting Optimizer (p.123) will

adjust the image automatically to obtain the optimum brightness

and contrast. It is also enabled by default in Creative Zone modes.

<A> is a fully automatic mode. The camera analyzes the scene

and sets the optimum settings automatically. It also adjusts focus

automatically by detecting whether the subject is still or moving (p.61).

1Set the Mode Dial to <A>.

2Aim any AF point over the

subject.

All the AF points will be used to focus,

and the camera will normally focus on

the closest object.

Aiming the center AF point over the

subject will make focusing easier.

3Focus on the subject.

Press the shutter button halfway. The

lens focusing ring will rotate to focus.

The dot inside the AF point achieving

focus flashes briefly in red. At the

same time, the beeper will sound and

the focus indicator <o> in the

viewfinder will light up.

If necessary, the built-in flash will be

raised automatically.

Fully Automatic Shooting (Scene Intelligent Auto)

AF point

Focus indicator

A Fully Automatic Shooting (Scene Intelligent Auto)

4Take the picture.

Press the shutter button completely to

take the picture.

The captured image will be displayed

for approx. 2 sec. on the LCD

monitor.

After you finish shooting, push down

the built-in flash with your fingers.

The focus indicator <o> blinks and focus is not achieved.

Aim the AF point over an area with good contrast, then press the

shutter button halfway (p.47). If you are too close to the subject,

move away and try again.

Multiple AF points flash simultaneously.

This indicates that focus is achieved at all those AF points. When the

AF point covering the desired subject also flashes, take the picture.

The beeper continues to beep softly. (The focus indicator <o>

does not light up.)

It indicates that the camera is focusing continuously on a moving

subject. (The focus indicator <o> does not light up.) You can take

sharp pictures of a moving subject.

Note that the focus lock (p.61) will not work in this case.

Pressing the shutter button halfway does not focus on the

subject.

If the focus mode switch on the lens is set to <MF> (manual focus),

set it to <AF> (autofocus).

FAQ

The <A> mode makes the colors look more impressive in nature, outdoor,

and sunset scenes. If you did not obtain the desired color tones, change the

mode to a Creative Zone mode and select a Picture Style other than

<D>, then shoot again (p.95).

A Fully Automatic Shooting (Scene Intelligent Auto)

The flash fired even though it was daylight.

For a backlit subject, the flash may fire to help lighten the subject’s

dark areas. If you do not want the flash to fire, use the Flash off

mode (p.63). Other than the flash setting, the camera will shoot with

the same settings as with <A>.

The flash fired and the picture came out extremely bright.

Move further away from the subject and shoot. When shooting flash

photography, if the subject is too close to the camera, the picture

may come out extremely bright (overexposure).

In low light, the built-in flash fired a series of flashes.

Pressing the shutter button halfway may trigger the built-in flash to

fire a series of flashes to assist autofocusing. This is called the AF-

assist beam. Its effective range is approx. 4 meters / 13.1 feet.

When flash was used, the bottom part of the picture came out

unnaturally dark.

The shadow of the lens barrel was captured in the picture because

the subject was too close to the camera. Move further away from the

subject and shoot. If a hood is attached to the lens, remove it before

taking the flash picture.

Depending on the scene, position the subject toward the left or right to

create a balanced background and good perspective.

In the <A> mode, pressing the shutter button halfway to focus on a

still subject will lock the focus on that subject. Recompose the shot

while keeping the shutter button pressed halfway, and then press the

shutter button completely to take the picture. This is called “focus lock”.

Focus lock is also possible in other Basic Zone modes (except <5>).

In the <A> mode, if the subject moves (distance to camera changes)

while or after you focus, AI Servo AF will take effect to focus on the

subject continuously. (The beeper will continue beeping softly.) As long

as you keep aiming the AF point on the subject while pressing the

shutter button halfway, the focusing will be continuous. When you want

to take the picture, press the shutter button completely.

Full Auto Techniques (Scene Intelligent Auto)

Recomposing the Shot

Shooting a Moving Subject

A Full Auto Techniques (Scene Intelligent Auto)

You can shoot while viewing the image on the LCD monitor. This is

called “Live View shooting”. For details, see page 139.

1Display the Live View image on

the LCD monitor.

Press the <A> button.

The Live View image will appear on

the LCD monitor.

2Focus on the subject.

Aim the center AF point < > on the

subject.

Press the shutter button halfway to

focus.

When focus is achieved, the AF point

will turn green and the beeper will

sound.

If necessary, the built-in flash will be

raised automatically.

3Take the picture.

Press the shutter button completely.

The picture is taken and the captured

image is displayed on the LCD

monitor.

When the playback display ends, the

camera will return to Live View

shooting automatically.

Press the <A> button to exit the

Live View shooting.

A Live View Shooting

The camera analyzes the scene and sets the optimum settings

automatically. In places where flash photography is prohibited such as

in a museum or an aquarium, use the <7> (Flash Off) mode. This

mode is also effective for capturing the particular ambience of a scene,

such as candlelight scenes.

Prevent camera shake if the numeric display (shutter speed) in

the viewfinder blinks.

Under low light when camera shake is prone to occur, the

viewfinder’s shutter speed display will blink. Hold the camera steady

or use a tripod. When using a zoom lens, use a wide angle to reduce

blur caused by camera shake even with handheld shooting.

When shooting portraits

In low-light conditions, tell the subject to keep still until the picture is

taken. Any movement by the subject during shooting may result in

the subject being blurred in the picture.

7 Disabling Flash

Shooting Tips

In the <C> mode, you can easily change the depth of field, drive/self-

timer, and flash firing. You can also select and shoot with the ambience

you want to convey in your images. The default settings are the same

as the <A> mode.

* CA stands for Creative Auto.

1Set the Mode Dial to <C>.

2Press the <Q> button (7).

The Quick Control screen will appear.

3Set the desired function.

Press the <S> cross keys to select a

function.

The settings of the selected function

and Feature guide (p.55) will appear.

For the setting procedure and details

on each function, see pages 65-66.

4Take the picture.

Press the shutter button completely to

take the picture.

C Creative Auto Shooting

Pressing the <Q> button enables you to set the following:

(1) Ambience-based shots

You can select and shoot with the ambience you want to convey in

your images. Press the <Y> <Z> keys or turn the <6> dial to

select the ambience. You can also select it from a list by pressing

<0>. For details, see page 76.

(2) Blurring/sharpening the background

If you move the index mark toward the left, the background will look

more blurred. If you move it toward the right, the background will

look more in focus. If you want to blur the background, see “Shooting

Portraits” on page 67. Press the <Y> <Z> keys or turn the <6>

dial to select the desired degree of blur.

Depending on the lens and shooting conditions, the background

may not look so blurred.

This function cannot be set if you use flash. Also, the setting will not

be applied if <a> has been selected and the flash is fired.

Shutter speed (1)

(2)

(4)

Battery level Possible shots

ISO speed

Image-recording quality

Aperture

(3)

C Creative Auto Shooting

(3) Drive/self-timer: Press <0> and set it with the <Y> <Z> keys or

<6> dial.

Single shooting: Shoot one image at a time.

Continuous shooting:

While you hold down the shutter button

completely, shots will be taken

continuously. You can shoot up to

approx. 3 shots per second.

<j>Self-timer: 10 sec. : The picture is taken 10 seconds after

you press the shutter button.

<q>Self-timer: Continuous:

Press the <W> <X> keys to set the

number of multiple shots (2 to 10) to be

taken with the self-timer. 10 seconds

after you press the shutter button, the

set number of multiple shots will be

taken.

(4) Built-in flash firing: Press <0> and set it with the <Y> <Z> keys

or <6> dial.

<a>Auto built-in flash : The flash fires automatically when

necessary.

Built-in flash on : The flash fires at all times.

Built-in flash off : The flash is disabled.

When using the self-timer, see the notes on page 103 for shooting.

When using , see “Disabling Flash” on page 63.

The <2> (Portrait) mode blurs the background to make the human

subject stand out. It also makes skin tones and hair look softer.

Select the location where the distance between the subject and

the background is the farthest.

The further the distance between the subject and background, the

more blurred the background will look. The subject will also stand

out better against an uncluttered dark background.

Use a telephoto lens.

If you have a zoom lens, use the telephoto end to fill the frame with

the subject from the waist up. Move in closer if necessary.

Focus on the face.

Check that the AF point covering the face lights up. For close-ups of

the face, focus on the eyes.

2 Shooting Portraits

Shooting Tips

If you hold down the shutter button, you can shoot continuously (max.

approx. 3 shots/sec.) to capture changes in the subject’s facial

expression and pose.

If necessary, the built-in flash will fire automatically.

Use the <3> (Landscape) mode for wide scenery or to have

everything in focus from near to far. For vivid blues and greens, and

very sharp and crisp images.

With a zoom lens, use the wide-angle end.

When using the wide-angle end of a zoom lens, objects near and far

will be in focus better than at the telephoto end. It also adds breadth

to landscapes.

When shooting night scenes.

Since the built-in flash will be disabled, this

mode <3> is also good for night scenes.

Use a tripod to prevent camera shake.

If you want to shoot a person against a

night scene, set the Mode Dial to <6>

(Night Portrait) and use a tripod (p.72).

3 Shooting Landscapes

Shooting Tips

The built-in flash will not fire even in backlit or low-light conditions.

If you are using an external Speedlite, the Speedlite will fire.

When you want to shoot flowers or small things up close, use the <4>

(Close-up) mode. To make small things appear much larger, use a

macro lens (sold separately).

Use a simple background.

A simple background makes small objects such as flowers stand out

better.

Move in as close as possible to the subject.

Check the lens for its minimum focusing distance. Some lenses

have indications such as <MACRO 0.25m/0.8ft> on them. The lens

minimum focusing distance is measured from the <V> (focal

plane) mark on the top of the camera to the subject. If you are too

close to the subject, the focus indicator <o> will blink.

If you use flash and the bottom part of the picture comes out

unnaturally dark, move away from the subject and try again.

With a zoom lens, use the telephoto end.

If you have a zoom lens, using the telephoto end will make the

subject look larger.

4 Shooting Close-ups

Shooting Tips

If necessary, the built-in flash will fire automatically.

Use the <5> (Sports) mode to shoot a moving subject, such as a

running person or a moving vehicle.

Use a telephoto lens.

The use of a telephoto lens is recommended for shooting from a

distance.

Use the center AF point to focus.

Aim the center AF point over the subject, then press the shutter

button halfway to autofocus. During autofocusing, the beeper will

continue beeping softly. If focus cannot be achieved, the focus

indicator <o> will blink.

When you want to take the picture, press the shutter button

completely. If you hold down the shutter button, you can shoot

continuously (max. approx. 3 shots/sec.) while maintaining

autofocusing to capture changes in the subject’s movement.

5 Shooting Moving Subjects

Shooting Tips

The built-in flash will not fire even in backlit or low-light conditions.

Under low light when camera shake tends to occur, the viewfinder’s

shutter speed display on the bottom left will blink. Hold the camera

steady and shoot.

If you are using an external Speedlite, the Speedlite will fire.

When shooting food, use (Food). The photo will look bright and

appetizing. Also, depending on the light source, the reddish tinge will be

suppressed in the pictures taken under tungsten lights, etc.

Change the color tone.

You can change [Color tone]. To increase the food’s reddish tinge,

set it toward [Warm]. Set it toward [Cool] if it looks too red.

Avoid using flash.

If you use flash, the light may reflect off the dish or food and results

in unnatural shadows. By default, (Built-in flash off) is set. Try

to prevent camera shake when shooting in low-light conditions.

P Shooting Food

Shooting Tips

Since this mode lets you shoot the food in appetizing color tones, human

subjects may be shot in an unsuitable skin tone.

The warm color cast of subjects may fade.

When multiple light sources are included on the screen, the warm color

cast of the picture may not be lessened.

If you use flash, the [Color tone] setting will switch to the standard

setting.

To shoot people at night and obtain a natural-looking night scene in the

background, use the <6> (Night Portrait) mode. Using a tripod is

recommended.

Use a wide-angle lens and a tripod.

When using a zoom lens, use the wide-angle end to obtain a wide

night view. Also, use a tripod to prevent camera shake.

Check the subject’s brightness.

Under low light, the built-in flash will fire automatically to obtain a

good exposure of the subject.

It is recommended to play back the image after shooting to check

the image brightness. If the subject looks dark, move nearer and

shoot again.

Also shoot with the <A> (Scene Intelligent Auto) mode.

Since camera shake is prone to occur with night shots, shooting also

in the <A> mode is recommended.

6 Shooting Night Portraits

Shooting Tips

6 Shooting Night Portraits

During Live View shooting, it may be difficult to focus on dots of light such as

in a night scene. In such a case, it is recommended that you set the AF

method to [Quick mode] and shoot. If it is still difficult to focus, set the lens’s

focus mode switch to <MF> and focus manually.

Tell the subject to keep still even after the flash fires.

If you use the self-timer together with flash, the self-timer lamp will light

up briefly after the picture is taken.

In Basic Zone modes, when the shooting function settings are

displayed, you can press the <Q> button to display the Quick Control

screen and can set the functions shown in the table on the next page.

1Set the Mode Dial to a Basic Zone

mode.

2Press the <Q> button (7).

The Quick Control screen will appear.

3Set the desired function.

Press the <S> cross keys to select a

function. (This step is not necessary

in the A/7 mode.)

The settings of the selected function

and Feature guide (p.55) will appear.

Press the <Y> <Z> keys or turn the

<6> dial to change some of the

settings.

You can also select from a list by

selecting a function and pressing

<0>.

Q Quick Control

Example: Portrait mode

Q Quick Control

Settable Functions in Basic Zone Modes

o: Default setting k: User selectable : Not selectable

* Use the <W> <X> keys to set the number of continuous shots.

Function A 7 C2 3 4 5 P 6

Drive/

self-timer

(p.102-103)

u: Single shooting ooo oo oo

i: Continuous

shooting ko o

j: 10 sec. kkkkkkkkk

q: Continuous

shooting* kkkkkkkkk

Built-in flash

firing

a: Automatic firing ooo o o

D: Flash on (Fires at

all times) k k

b: Flash off ok ooo

Ambience-based shots (p.76) kkkkkkk

Light/scene-based shots (p.80) kkkk

Blurring/sharpening the background

(p.65) k

Color tone (p.71) k

If you change the shooting mode or set the power switch to <2>, all the

functions will revert to the default settings (except the self-timer).

Except in the <A> and <7> Basic Zone modes, you can select the

ambience for shooting.

1Set the Mode Dial to any of the

following modes: <C>, <2>,

<3>, <4>, <5>, , or <6>.

2Display the Live View image.

Press the <A> button to display the

Live View image.

3With Quick Control, select the

desired ambience.

Press the <Q> button (7).

Press the <W> <X> keys to select

[Standard setting]. [Ambience-

based shots] will appear on the

screen.

Press the <Y> <Z> keys or turn the

<6> dial to select the ambience.

The LCD monitor will display how the

image will look with the selected

ambience.

Shooting with Ambience Selection

Ambience A 7 C2 3 4 5 P 6 Ambience Effect

(1) Standard setting kkkkkkk No setting

(2) Vivid kkkkk kLow / Standard / Strong

(3) Soft kkkkk kLow / Standard / Strong

(4) Warm kkkkk kLow / Standard / Strong

(5) Intense kkkkk kLow / Standard / Strong

(6) Cool kkkkk kLow / Standard / Strong

(7) Brighter kkkkkkk

Low / Medium / High

(8) Darker kkkkkkk

Low / Medium / High

(9) Monochrome kkkkkkk

Blue / B/W / Sepia

Shooting with Ambience Selection

4Set the ambience effect.

Press the <W> <X> keys to select

the effect so that [Effect] appears at

the bottom.

Press the <Y> <Z> keys or turn the

<6> dial to select the desired

effect.

5Take the picture.

Press the shutter button completely to

take the picture.

To return to viewfinder shooting,

press the <A> button to exit Live

View shooting. Then press the shutter

button completely to take the picture.

If you change the shooting mode or

set the power switch to <2>, the

setting will revert back to [Standard

setting].

The Live View image shown with the ambience setting applied will not

look exactly the same as the actual photo.

Using flash may reduce the ambience effect.

In bright outdoors, the Live View image you see on the LCD monitor may

not have exactly the same brightness or ambience as with the actual

captured image. Set [52: LCD brightness] to 4, and look at the Live

View image, preventing the surrounding light from affecting the image

viewing.

If you do not want the Live View image to be displayed when setting

functions, press the <Q> button after step 1 and set [Ambience-based

shots] and [Effect].

Shooting with Ambience Selection

Ambience Settings

(1) Standard setting

Standard image characteristics for the respective shooting mode.

Note that <2> has image characteristics geared for portraits and

<3> is geared for landscapes. Each ambience is a modification of

the respective shooting mode’s image characteristics.

(2) Vivid

The subject will look sharp and vivid. It makes the photo look more

impressive than with [Standard setting].

(3) Soft

The subject will look softer and more dainty. Good for portraits, pets,

flowers, etc.

(4) Warm

The subject will look softer with warmer colors. Good for portraits,

pets, and other subjects to which you want to give a warm look.

(5) Intense

While the overall brightness is slightly lowered, the subject is

emphasized for a more intense feeling. Makes the human or living

subject stand out more.

(6) Cool

The overall brightness is slightly lowered with a cooler color cast. A

subject in the shade will look more calm and impressive.

Shooting with Ambience Selection

(7) Brighter

The picture will look brighter.

(8) Darker

The picture will look darker.

(9) Monochrome

The picture will be monochrome. You can select the monochrome

color to be blue, black and white, or sepia. When [Monochrome] is

selected, <0> will appear in the viewfinder.

In the <2>, <3>, <4>, and <5> Basic Zone modes, you can shoot

with the settings matching the lighting or scene type. Normally, [Default

setting] is adequate, but if the settings match the lighting condition or

scene, the picture will look more accurate to your eyes.

For Live View shooting, if you set both [Light/scene-based shots] and

[Ambience-based shots] (p.76), you should first set [Light/scene-

based shots]. This will make it easier to see the resulting effect on the

LCD monitor.

1Set the Mode Dial to any of the

following modes: <2>, <3>,

<4>, or <5>.

2Display the Live View image.

Press the <A> button to display the

Live View image.

Shooting by Lighting or Scene Type

Lighting or Scene A 7 C2 3 4 5 P 6

(1) Default setting kkkk

(2) Daylight kkkk

(3) Shade kkkk

(4) Cloudy kkkk

(5) Tungsten light kkk

(6) Fluorescent light kkk

(7) Sunset kkkk

Shooting by Lighting or Scene Type

3With Quick Control, select the

lighting or scene type.

Press the <Q> button (7).

Press the <W> <X> keys to select

[Default setting]. [Light/scene-

based shots] will appear on the

screen.

Press the <Y> <Z> keys or turn the

<6> dial to select the lighting or

scene type.

The resulting image with the selected

lighting or scene type will be

displayed.

4Take the picture.

Press the shutter button completely to

take the picture.

To return to viewfinder shooting,

press the <A> button to exit Live

View shooting. Then press the shutter

button completely to take the picture.

If you change the shooting mode or

set the power switch to <2>, the

setting will revert back to [Default

setting].

If you use flash, the setting will switch to [Default setting]. (However, the

shooting information will display the lighting or scene type that is set.)

If you want to set this function together with [Ambience-based shots],

set the lighting or scene type that best matches the ambience you have

set. In the case of [Sunset], particularly, warm colors will become

prominent so the ambience you set may not be effective.

If you do not want the Live View image to be displayed when setting

functions, press the <Q> button after step 1 and set [Light/scene-based

shots].

Shooting by Lighting or Scene Type

Lighting or Scene Type Settings

(1) Default setting

Default setting suited for most subjects.

(2) Daylight

For subjects under sunlight. Gives more natural-looking blue skies

and greenery and reproduces light-colored flowers better.

(3) Shade

For subjects in the shade. Suitable for skin tones, which may look

too bluish, and for light-colored flowers.

(4) Cloudy

For subjects under overcast skies. Makes skin tones and

landscapes, which may otherwise look dull on a cloudy day, look

warmer. Also effective for light-colored flowers.

(5) Tungsten light

For subjects lit under tungsten lighting. Reduces the reddish-orange

color cast caused by tungsten lighting.

(6) Fluorescent light

For subjects under fluorescent lighting. Suited for all types of

fluorescent lighting.

(7) Sunset

Suitable when you want to capture the sunset’s impressive colors.

The easiest way to play back images is explained below. For more

details on the playback procedure, see page 207.

1Play back the image.

Press the <x> button.

The last image captured or played

back will appear.

2Select an image.

To view images starting with the last

captured image, press the <Y> key.

To view images starting with the first

(oldest) image, press the <Z> key.



Each time you press the <

> button,

the information display will change.

3Exit the image playback.

Press the <x> button to exit the

image playback and return to the

shooting function settings display.

x Image Playback

Basic information display

Histogram

Basic information +

Image quality/Playback number

Shooting information display

Creative Shooting

In the Basic Zone modes, to prevent spoiled shots,

most advanced functions are set automatically and

cannot be changed. In the <d> (Program AE) mode,

you can set various functions and be more creative.

In the <d> mode, the camera sets the shutter speed and

aperture automatically to obtain the standard exposure.

The difference between the Basic Zone modes and <d> is

explained on pages 276-277.

The functions explained in this chapter can also be used in

the <s>, <f>, and <a> modes explained in Chapter

The M icon at the upper right of the page title indicates that

the function is available only in Creative Zone modes

(p.30).

The camera automatically sets the shutter speed and aperture to suit

the subject’s brightness. This is called Program AE.

*<d> stands for Program.

*AE stands for Auto Exposure.

1Set the Mode Dial to <d>.

2Focus on the subject.

Look through the viewfinder and aim

the selected AF point over the

subject. Then press the shutter button

halfway.

The dot inside the AF point achieving

focus lights up briefly in red, and the

focus indicator <o> on the

viewfinder’s bottom right lights up (in

One-Shot AF mode).

The shutter speed and aperture will

be set automatically and displayed in

the viewfinder.

3Check the display.

The standard exposure will be

obtained as long as the shutter speed

and aperture display do not blink.

4Take the picture.

Compose the shot and press the

shutter button completely.

d: Program AE

Change the ISO speed. Use the built-in flash.

To match the subject and ambient lighting level, you can change the

ISO speed (p.92) or use the built-in flash (p.104). In the <d> mode,

the built-in flash will not fire automatically. When indoors or during

low light shooting, it is recommended that you press the (flash)

button to raise the built-in flash. (You can also raise the built-in flash

by selecting <s> with the Quick Control.)

Change the program using Program shift.

After pressing the shutter button halfway, turn the <6> dial to

change the shutter speed and aperture setting combination

(program). Program shift is canceled automatically when the

metering timer (0) ends (exposure setting display turns off).

Program shift is not possible with flash.

Shooting Tips

If the “30"” shutter speed and the lowest f/number

blink, it indicates underexposure. Increase the ISO

speed or use flash.

If the “4000” shutter speed and the highest f/number

blink, it indicates overexposure. Decrease the ISO

speed.

Differences Between <d> and <A>

In the <A> mode, many functions, such as the AF operation and metering

mode, are set automatically to prevent spoiled shots. The functions you can

set are limited. With <d> mode, only the shutter speed and aperture are set

automatically. You can freely set the AF operation, metering mode, and

other functions (p.276).

You can select the pixel count and the image quality. Ten image-

recording quality settings are provided: 73, 83, 74, 84, 7a,

8a, b, c, 1+73, 1.

1Select the image-recording

quality.

Under the [z1] tab, select [Image

quality], then press <0>.

[Image quality] will appear.

2Set the image-recording quality.

Select the image-recording quality,

referring to the respective quality’s

pixel count and number of possible

shots displayed on the screen, then

press <0>.

Setting the Image-Recording Quality

Pixels recorded (pixel count)

Possible shots

3 Setting the Image-Recording Quality

The file size, possible shots, and maximum burst during continuous shooting

are based on Canon’s testing standards (3:2 aspect ratio, ISO 100 and

Standard Picture Style) using an 8 GB card. These figures will vary by the

subject, card brand, aspect ratio, ISO speed, Picture Style, Custom

Functions, and other settings.

“Full” indicates that shooting is possible until the card becomes full with the

listed conditions.

Guide to Image-Recording Quality Settings (Approx.)

Image Quality

Pixels

Recorded

(megapixels)

File Size

(MB)

Possible

Shots

Maximum

Burst

73 High

quality

JPEG

24M 7.5 940 150

83 3.7 1920 Full

74 Medium

quality 11M 3.9 1820 Full

84 1.9 3580 Full

Low

quality

5.9M 2.4 2880 Full

8a1.3 5440 Full

b2.5M 1.3 5440 Full

c0.3M 0.3 19380 Full

1+73 High

quality 24M 30.3+7.5 180 6

130.3 230 11

3 Setting the Image-Recording Quality

I want to select the image-recording quality matching the paper

size for printing.

Refer to the diagram on the left when

choosing the image-recording quality. If

you want to crop the image, selecting a

higher quality (more pixels) such as 73,

83, 1+73, or 1 is recommended.

b is suitable for playing back the image

with a commercially-available digital

photo frame. c is suitable for emailing

the image or using it on a website.

What’s the difference between 7 and 8?

These settings indicate the different levels of image quality caused

by different compression rates. The 7 setting produces a higher

image quality with the same number of pixels. Although 8 produces

a slightly lower image quality, this allows more images to be saved

on the card. Both b and c have 7 (Fine) quality.

I was able to take more shots than the number of possible shots

indicated.

Depending on the shooting conditions, you may be able to take more

shots than is indicated. On the contrary, it may also be fewer than

indicated. The number of possible shots displayed is only approximate.

Does the camera display the maximum burst?

The maximum burst is displayed on the viewfinder’s right side. Since

it is only a single-digit indicator 0 - 9, any number higher than 8 will

be displayed only as “9”. Note that this number will also be displayed

even when no card is installed in the camera. Be careful not to shoot

without a card in the camera.

When should I use 1?

1 images must be processed on a computer. For details, see

“1” and “1+73” on the next page.

FAQ

Paper size

A2 (59.4x42 cm/23.4x16.5 in.)

1+73

A3 (42x29.7 cm/

16.5x11.7 in.)

A4 (29.7x21 cm/11.7x8.3 in.)

12.7x8.9 cm/5.0x3.5 in.

3 Setting the Image-Recording Quality

1 is the raw image data before it is made into 73 or other images.

1 images cannot be viewed on a computer without the use of

software, such as Digital Photo Professional (EOS software, p.314).

However, you can perform various adjustments on them that are

impossible with other image types such as 73. 1 is effective when

you want to precisely adjust the image yourself or shoot an important

subject.

1+73 records a 1 image and a 73 image with a single shot. The

two images are saved to the card simultaneously. The two images will

be saved in the same folder with the same file numbers (file extension

.JPG for JPEG and .CR2 for RAW). 73 images can be viewed or

printed even with a computer which does not have the EOS software

installed.

1+73

1 image

73 image

0001 . CR2

0001 . JPG

File number File extension

RAW Image Processing Software

To display RAW images on a computer, using Digital Photo Professional

(DPP, EOS software) is recommended (p.314).

Previous versions of DPP Ver.4.x cannot process RAW images taken

with this camera. If a previous version of DPP Ver.4.x is installed on your

computer, obtain and install the latest version of DPP from the Canon

website to update it (p.315). (The previous version will be overwritten.)

Note that DPP Ver.3.x or earlier cannot process RAW images taken with

this camera.

Commercially-available software may not be able to display RAW

images taken with this camera. For compatibility information, contact the

software manufacturer.

Set the ISO speed (image sensor’s sensitivity to light) to suit the

ambient light level. In Basic Zone modes, the ISO speed is set

automatically (p.94).

1Press the <Wi> button.

[ISO speed] will appear.

2Set the ISO speed.

Press the <Y> <Z> keys or turn the

<6> dial to select the desired ISO

speed, then press <0>.

With [AUTO] selected, the ISO speed

will be set automatically (p.93).

ISO Speed Guide

* High ISO speeds will result in grainier images.

: Changing the ISO Speed to Suit the Light Level

ISO Speed Shooting Situation

(No flash) Flash Range

ISO 100 - ISO 400 Sunny outdoors The higher the ISO

speed, the farther the

flash range will extend

(p.105).

ISO 400 - ISO 1600 Overcast skies or evening time

ISO 1600 - ISO 6400, H Dark indoors or night

Under [53: Custom Functions (C.Fn)], if [2: ISO expansion] is set to

[1: On], “H” (equivalent to ISO 12800) can also be selected (p.260).

Under [53: Custom Functions (C.Fn)], if [10: Flash button function]

is set to [1: ISO speed], you can set the ISO speed with the <D> button.

Under [53: Custom Functions (C.Fn)], if [6: Highlight tone priority] is

set to [1: Enable], ISO 100 and “H” (equivalent to ISO 12800) cannot be

selected (p.263).

Shooting in high temperatures may result in images that look grainier.

Long exposures can also cause irregular colors in the image.

i: Changing the ISO Speed to Suit the Light LevelN

If the ISO speed is set to [AUTO], the

actual ISO speed setting will be

displayed when you press the shutter

button halfway. As indicated on the next

page, the ISO speed will be set

automatically to suit the shooting mode.

ISO [AUTO]

When you shoot at high ISO speeds, noise (such as dots of light and

banding) may become noticeable.

If you use a high ISO speed and flash to shoot a close subject,

overexposure may result.

As “H” (equivalent to ISO 12800) is an expanded ISO speed setting,

noise (such as dots of light and banding) and irregular colors will be more

noticeable, and the resolution will be lower than usual.

i: Changing the ISO Speed to Suit the Light LevelN

*1: Depends on the maximum ISO speed limit set.

*2: If fill-in flash will cause overexposure, ISO speed may be reduced, down to a

possible minimum of ISO 100.

*3: If bounce flash is used with an external Speedlite in a Basic Zone (except

<6>) mode or <d>, ISO 800 - ISO 1600 (or up to the maximum limit) will be

set automatically.

*4: Fixed at ISO 400 in mode. If bounce flash is used with an external

Speedlite in mode, ISO 400 - ISO 1600 will be set automatically.

*5: Fixed at ISO 400 if the maximum limit is ISO 400.

For ISO Auto, you can set the maximum ISO speed limit within ISO 400 -

ISO 6400.

Under the [z3] tab, select [ISO Auto],

then press <0>. Select the ISO speed,

then press <0>.

Shooting Mode ISO Speed Setting

A/7/C/3/4/5/P/6Automatically set within ISO 100 - ISO 3200

d/s/f/aAutomatically set within ISO 100 - ISO 6400*1

2ISO 100

With flash ISO 800*2*3*4*5

With bulb exposures ISO 800*5

3 Setting the Maximum ISO Speed for [AUTO]N

When [AUTO] is set, the ISO speed is indicated in whole-stop

increments. However, the ISO speed is actually set in finer increments.

Therefore, in the image’s shooting information (p.232), you may find an

ISO speed such as ISO 125 or ISO 640 displayed as the ISO speed.

In the <2> mode, an ISO speed other than ISO 100 may be displayed,

but the actual ISO speed used is the one shown in the table above.

By selecting a Picture Style, you can obtain image characteristics

matching your photographic expression or the subject.

In Basic Zone modes, you cannot select the Picture Style.

1Select [Picture Style].

Under the [z2] tab, select [Picture

Style], then press <0>.

The Picture Style selection screen will

appear.

2Select a Picture Style.

Press the <W> <X> keys to select a

Picture Style, then press <0>.

The Picture Style will be set and the

menu will reappear.

DAuto

The color tone will be adjusted automatically to suit the scene. The

colors will look vivid for blue skies, greenery and sunsets,

particularly in nature, outdoor and sunset scenes.

PStandard

The image looks vivid, sharp, and crisp. This is a general-purpose

Picture Style suitable for most scenes.

QPortrait

For nice skin tones. The image looks softer. Suited for close-up

portraits.

By changing the [

Color tone

] (p.127), you can adjust the skin tone.

Selecting Optimal Image Characteristics

for the Subject

Picture Style Characteristics

If the desired color tone is not obtained with [

Auto

], use another Picture Style.

A Selecting Optimal Image Characteristics for the SubjectN

RLandscape

For vivid blues and greens, and very sharp and crisp images.

Effective for impressive landscapes.

SNeutral

This Picture Style is for users who prefer to process images with

their computer. For natural colors and subdued images with

modest brightness and color saturation.

UFaithful

This Picture Style is for users who prefer to process images with

their computer. The color of a subject that is captured in sunlight at

a color temperature of 5200K will be adjusted to match the

subject’s colorimetrical color. For subdued images with modest

brightness and color saturation.

VMonochrome

Creates black-and-white images.

WUser Def. 1-3

You can register a base style such as [Portrait], [Landscape], a

Picture Style file, etc., and adjust it as desired (p.129). Any User

Defined Picture Style that has not been set will have the same

default settings as the [Auto] Picture Style.

Black-and-white images shot in formats other than 1 cannot be

reverted to color. Be careful not to leave the [Monochrome] setting

on when you want to shoot photos in color again. When

[Monochrome] is selected, <0> will appear in the viewfinder.

You can select the AF (autofocus) operation characteristics suiting the

shooting conditions or subject. In Basic Zone modes, the optimum AF

operation is set automatically for the respective shooting mode.

1Set the lens’s focus mode switch

to <AF>.

2Press the <Zf> button.

[AF operation] will appear.

3Select the AF operation.

Press the <Y> <Z> keys or turn the

<6> dial to select the desired AF

operation, then press <0>.

4Focus on the subject.

Aim the AF point over the subject and

press the shutter button halfway. The

camera will then autofocus in the

selected AF operation.

Suited for still subjects. When you press the shutter button

halfway, the camera will focus only once.

When focus is achieved, the dot inside the AF point achieving focus

lights up briefly in red, and the focus indicator <o> appears in the

viewfinder.

With evaluative metering (p.115), the exposure setting will be set at

the same time focus is achieved.

While you hold down the shutter button halfway, the focus will be

locked. You can then recompose the shot if desired.

f: Changing the Autofocus OperationN

One-Shot AF for Still Subjects

f: Changing the Autofocus OperationN

This AF operation is suited for moving subjects when the focusing

distance keeps changing. While you hold down the shutter button

halfway, the camera will keep focusing on the subject

continuously.

The exposure is set at the moment the picture is taken.

When the AF point selection (p.99) is automatic, the camera first

uses the center AF point to focus. During autofocusing, if the subject

moves away from the center AF point, focus tracking continues as

long as the subject is covered by another AF point.

AI Focus AF switches the AF operation from One-Shot AF to AI

Servo AF automatically if a still subject starts moving.

After the subject is focused in One-Shot AF, if the subject starts

moving, the camera will detect the movement, change the AF

operation automatically to AI Servo AF, and start tracking the moving

subject.

AI Servo AF for Moving Subjects

AI Focus AF for Switching the AF Operation Automatically

If focus cannot be achieved, the focus indicator <o> in the viewfinder

will blink. If this occurs, the picture cannot be taken even if the shutter

button is pressed completely. Recompose the shot and try to focus

again, or see “Subjects Difficult to Focus on” (p.101).

If [z1: Beep] is set to [Disable], the beeper will not sound when focus

is achieved.

With AI Servo AF, the beeper will not sound even when focus is achieved.

Also, the focus indicator <o> in the viewfinder will not light up.

When focus is achieved in the AI Focus AF operation with the Servo mode

active, the beeper will sound softly. However, the focus indicator <o> in the

viewfinder will not light up. Note that focus will not be locked in this case.

In Basic Zone modes, the camera will normally focus on the closest

subject automatically. Therefore, it may not always focus on your target

subject.

In the <d>, <s>, <f>, and <a> modes, you can select one AF

point and focus only on the area covered by that AF point.

1Press the <S> button (9).

The selected AF point will be

displayed on the LCD monitor and in

the viewfinder.

2Select the AF point.

Use the <S> cross keys to select

the AF point.

While looking through the viewfinder,

you can select the AF point by turning

the <6> dial until the desired AF

point lights up in red.

When all the AF points light up,

automatic AF point selection will be

set. The AF point will be selected

automatically to focus on the subject.

Pressing <0> toggles the AF point

selection between the center AF point

and automatic AF point selection.

3Focus on the subject.

Aim the selected AF point over the

subject and press the shutter button

halfway to focus.

S Selecting the AF PointN

100

When shooting a portrait up close, use One-Shot AF and focus

on the eyes.

If you set the composition after focusing on the eyes of the person to

be photographed, the vivid facial expression will stand out more in

the picture.

If it is difficult to focus, select and use the center AF point.

The center AF point is the most sensitive among the nine AF points.

To make it easier to focus on a moving subject, set the camera

to automatic AF point selection and AI Servo AF (p.98).

The center AF point will first be used to focus on the subject. During

autofocusing, if the subject moves away from the center AF point,

focus tracking continues as long as the subject is covered by

another AF point.

Under low-light conditions, when you press the shutter button halfway,

the built-in flash may fire a brief burst of flashes. This illuminates the

subject to help autofocusing.

Shooting Tips

AF-Assist Beam with the Built-in Flash

AF-assist beam will not be emitted from the built-in flash in <7>, <3>,

or <5> mode, or when [Built-in flash firing] is set to in <C> or

mode.

The AF-assist beam will not be emitted with AI Servo AF operation.

The effective range of the AF-assist beam emitted by the built-in flash is

approx. 4 meters / 13.1 feet.

In Creative Zone modes, when you raise the built-in flash with the

button (p.104), the AF-assist beam will be emitted as necessary. Note

that the AF-assist beam will be emitted according to the setting of [7: AF-

assist beam firing] under [53: Custom Functions(C.Fn)] (p.264).

If you use an Extender (sold separately) and the maximum aperture

becomes higher than f/5.6, AF shooting will not be possible (except in

[FlexiZone - Single] and [u Live mode] during Live View shooting). For

details, refer to the Extender’s instruction manual.

101

Autofocus can fail to achieve focus (viewfinder’s focus indicator <o>

blinks) with certain subjects such as the following:

Subjects with very low contrast

(Example: Blue skies, solid-color flat surfaces, etc.)

Subjects in very low light

Strongly backlit and reflective subjects

(Example: Cars with highly reflective bodies, etc.)

Near and distant subjects framed close to an AF point

(Example: Animals in cages, etc.)

Subjects such as dots of light framed close to an AF point

(Example: Night scenes, etc.)

Repetitive patterns

(Example: Skyscraper windows, computer keyboards, etc.)

In such cases, focus by doing either of the following:

(1) With One-Shot AF, focus on an object at the same distance as the

subject and lock the focus, then recompose the shot (p.61).

(2) Set the lens’s focus mode switch to <MF> and focus manually.

1Set the lens’s focus mode switch

to <MF>.

2Focus on the subject.

Focus by turning the lens’s focusing

ring until the subject looks sharp in

the viewfinder.

Subjects Difficult to Focus on

MF: Manual Focus

Depending on the subject, focus may be achieved by slightly

recomposing the shot and performing AF operation again.

For subjects difficult to focus on during Live View shooting with

[FlexiZone - Single] and [u Live mode], see page 152.

Focusing ring

If you press the shutter button halfway and focus manually, the AF point

achieving focus will light up briefly in red, the beeper will sound, and the

focus indicator <o> in the viewfinder will light up.

102

You can shoot up to approx. 3 shots per second. This is effective for

photographing a child running toward you or capturing different facial

expressions.

1Press the <Yij> button.

2Select .

Press the <Y> <Z> keys or turn the

<6> dial to select continuous

shooting , then press <0>.

3Take the picture.

The camera shoots continuously

while you hold down the shutter

button completely.

Also set the AF operation (p.97) matching the subject.

• For a moving subject

When AI Servo AF is set, focusing will be continuous during

continuous shooting.

• For a still subject

When One-Shot AF is set, the camera will focus only once during

continuous shooting.

i Continuous ShootingN

Shooting Tips

Under [53: Custom Functions (C.Fn)], if [5: High ISO speed noise

reduct’n] is set to [2: Strong] (p.263), the maximum burst during

continuous shooting will greatly decrease. Also, the continuous shooting

speed may be slower.

The continuous shooting speed may become slower if the remaining

battery level is low or if you shoot under low-light conditions.

In AI Servo AF operation, the continuous shooting speed may become

slightly slower depending on the subject and the lens used.

103

1Press the <Yij> button.

2Select the self-timer.

Press the <Y> <Z> keys or turn the

<6> dial to select the self-timer,

then press <0>.

j: Shoot in approx. 10 sec.

l: Shoot in approx. 2 sec.N

Take the set number of shots

continuously in approx. 10 sec.

Press the <

> <

> keys

to set the number of

multiple shots (2 to 10) to

be taken with the self-timer.

3Take the picture.

Look through the viewfinder, focus on

the subject, then press the shutter

button completely.

You can check the self-timer operation with the self-timer lamp,

beeper, and countdown display (in seconds) on the LCD monitor.

2 sec. before the picture is taken, the self-timer lamp will light up and

the beeper will sound faster.

j Using the Self-timer

With <q>, the interval between the multiple shots may be prolonged

depending on the shooting functions settings such as the image-

recording quality or flash.

If you do not look through the viewfinder when you press the shutter

button, attach the eyepiece cover (p.271). If stray light enters the

viewfinder when the picture is taken, it may throw off the exposure.

After taking self-timer shots, playing back the image (p.83) to check

focus and exposure is recommended.

When using the self-timer to shoot yourself, use focus lock (p.61) on an

object at the same distance as where you will stand.

To cancel the self-timer after it starts, press the <Yij> button.

104

In indoor, low light or backlit conditions in daylight, just raise the built-in

flash and press the shutter button to take flash pictures. In the <d>

mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set

automatically to prevent camera shake.

1Press the <D> button.

In Creative Zone modes, you can

press the <D> button anytime to take

flash pictures.

While the flash is recycling, “DbuSY”

is displayed in the viewfinder, and

[BUSYD] is displayed on the LCD

monitor.

2Press the shutter button halfway.

In the bottom left of the viewfinder,

check that the <D> icon is lit.

3Take the picture.

When focus is achieved and you

press the shutter button completely,

the flash will fire at all times.

In bright light, decrease the ISO speed.

If the exposure setting in the viewfinder blinks, decrease the ISO

speed.

Detach the lens hood. Do not get too close to the subject.

If the lens has a hood attached or you are too close to the subject,

the bottom of the picture may look dark due to the obstructed flash.

For important shots, play back the image and check to make sure

the picture does not look unnaturally dark at the bottom part.

D Using the Built-in Flash

Shooting Tips

105

D Using the Built-in Flash

Effective Range of Built-in Flash (Approx. in meters / feet)

* For fill-in flash, the ISO speed may be set lower than ISO 800.

ISO Speed

(p.92)

EF-S18-55mm f/3.5-5.6 IS II

Wide Angle Telephoto

f/3.5 f/5.6

ISO 100 1 - 2.6 / 3.3 - 8.5 1 - 1.6 / 3.3 - 5.2

ISO 400 1 - 5.3 / 3.3 - 17.4 1 - 3.3 / 3.3 - 10.8

ISO 800/AUTO* 1 - 7.4 / 3.3 - 24.3 1 - 4.6 / 3.3 - 15.1

ISO 1600 1.3 - 10.5 / 4.3 - 34.4 1 - 6.6 / 3.3 - 21.7

ISO 6400 2.6 - 21.0 / 8.5 - 68.9 1.6 - 13.1 / 5.2 - 43.0

When a high ISO speed is set and focusing distance is long, appropriate

exposure may not be obtained depending on the subject conditions, etc.

Do not perform flash photography when the built-in flash is held down

with your finger or not fully raised for some other reason.

D Using the Built-in Flash

106

Using the red-eye reduction lamp before taking a flash picture can

reduce red eye.

Red-eye reduction will function in any shooting mode except <7>,

<3>, <5>, or <k>.

Under the [z1] tab, select [Red-eye

reduc.], then press <0>.

Select [Enable], then press <0>.

For flash photography, when you

press the shutter button halfway, the

red-eye reduction lamp will light up.

Then when you press the shutter

button completely, the picture will be

taken.

3 Red-eye Reduction

The red-eye reduction feature is more effective when the subject looks at

the red-eye reduction lamp, when the room is well lit, or when you are

close to the subject.

When you press the shutter button halfway, the

scale display on the bottom of the viewfinder will

shrink and turn off. For best results, take the picture after this scale

display turns off.

The effectiveness of red-eye reduction varies depending on the

individual subject.

107

Advanced Shooting

This chapter builds on Chapter 3 and introduces more

ways to shoot creatively.

The first half of this chapter explains how to use the <s>,

<f>, and <a> modes on the Mode Dial.

All the functions explained in Chapter 3 can also be used in

the <s>, <f>, and <a> modes.

To see which functions can be used in each shooting mode,

see page 276.

The M icon at the upper right of the page title indicates that

the function is available only in Creative Zone modes

(p.30).

The pointer icon <c> displayed

together with the shutter speed, aperture

setting, or exposure compensation

amount indicates that you can turn

<6> (the Main Dial) to adjust the

respective setting.

c Main Dial Pointer

108

You can either freeze the action or create motion blur with the <s>

(Shutter-priority AE) mode on the Mode Dial.

* <s> stands for Time value.

1Set the Mode Dial to <s>.

2Set the desired shutter speed.

See “Shooting Tips” for advice on

setting the shutter speed.

Turning the <6> dial to the right

sets a faster shutter speed, and

turning it to the left sets a slower one.

3Take the picture.

When you focus and press the

shutter button completely, the picture

will be taken at the selected shutter

speed.

s: Conveying the Subject’s Movement

Blurred motion

(Slow shutter speed: 1/30 sec.)

Frozen motion

(Fast shutter speed: 1/2000 sec.)

Shutter Speed Display

The LCD monitor displays the shutter speed as a fraction. However, the

viewfinder displays only the denominator. “0"5” indicates 0.5 sec. and “15"”

is 15 sec.

109

s: Conveying the Subject’s Movement

To freeze the motion of a fast-moving subject

Use a fast shutter speed such as 1/4000 sec. to 1/500 sec.

according to the speed of the moving subject.

To blur a running child or animal and convey an impression of

motion

Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow

the moving subject through the viewfinder and press the shutter

button to take the picture. If you use a telephoto lens, hold it steady

to prevent camera shake.

To blur a flowing river or fountain

Use a slow shutter speed of 1/30 sec. or slower. Use a tripod to

prevent hand-held camera shake.



Set the shutter speed so that the aperture display does not blink.

If you press the shutter button halfway and change

the shutter speed while the aperture is displayed,

the aperture display will also change to maintain the

same exposure (amount of light reaching the image

sensor). If you exceed the adjustable aperture

range, the aperture display will blink to indicate that

the standard exposure cannot be obtained.

If the exposure will be too dark, the maximum aperture (lowest f/

number) will blink. If this happens, turn the <6> dial to the left to

set a slower shutter speed or increase the ISO speed.

If the exposure will be too bright, the minimum aperture (highest f/

number) will blink. If this happens, turn the <6> dial to the right to

set a faster shutter speed or decrease the ISO speed.

To obtain the correct flash exposure on the main subject, the flash

output will be set automatically (autoflash) to match the automatically-

set aperture. Note that the range of settable shutter speed will be

limited within 1/200 sec. to 30 sec.

Shooting Tips

D Using the Built-in Flash

110

To blur the background or to make everything near and far look sharp,

set the Mode Dial to <f> (Aperture-priority AE) to adjust the depth of

field (range of acceptable focus).

*<f> stands for Aperture value, which is the size of the diaphragm hole inside

the lens.

1Set the Mode Dial to <f>.

2Set the desired aperture.

The higher the f/number, the wider

the depth of field where sharper focus

is obtained in both the foreground

and background.

Turning the <6> dial to the right will

set a higher f/number (smaller

aperture opening), and turning it to

the left will set a lower f/number

(larger aperture opening).

3Take the picture.

Focus and press the shutter button

completely. The picture will be taken

with the selected aperture.

f: Changing the Depth of Field

Sharp foreground and background

(With a high aperture f/number: f/32)

Blurred background

(With a low aperture f/number: f/5.6)

Aperture Display

The higher the f/number, the smaller the aperture opening will be. The

f/number displayed will differ depending on the lens. If no lens is attached to

the camera, “00” will be displayed for the aperture.

111

f: Changing the Depth of Field

When using an aperture with a high f/number or shooting in low

light scenes, note that camera shake can occur.

A higher aperture f/number will make the shutter speed slower.

Under low light, the shutter speed can be as long as 30 sec. In such

cases, increase the ISO speed and hold the camera steady or use a

tripod.

The depth of field depends not only on the aperture, but also on

the lens and on the subject distance.

Since wide-angle lenses have a wide depth of field (range of

acceptable focus in front of and behind the point of focus), you need

not set a high aperture f/number to obtain a sharp picture from the

foreground to the background. On the other hand, a telephoto lens

has a narrow depth of field.

And the closer the subject, the narrower the depth of field. A farther

subject will have a wider depth of field.

Set the aperture so that the shutter speed display does not

blink.

If you press the shutter button halfway and change

the aperture while the shutter speed is displayed,

the shutter speed display will also change to

maintain the same exposure (amount of light

reaching the image sensor). If you exceed the

adjustable shutter speed range, the shutter speed

display will blink to indicate that the standard

exposure cannot be obtained.

If the picture will be too dark, the “30"” (30 sec.) shutter speed

display will blink. If this happens, turn the <6> dial to the left to set

a lower f/number or increase the ISO speed.

If the picture will be too bright, the “4000” (1/4000 sec.) shutter

speed display will blink. If this happens, turn the <6> dial to the

right to set a higher f/number or decrease the ISO speed.

Shooting Tips

f: Changing the Depth of Field

112

To obtain a correct flash exposure, the flash output will be set

automatically to match the set aperture (autoflash). The shutter speed

will be set automatically between 1/200 sec. - 30 sec. to suit the scene’s

brightness.

In low light, the main subject is exposed with the autoflash, and the

background is exposed with a slow shutter speed set automatically.

Both the subject and background look properly exposed with a touch of

atmosphere (automatic slow-speed flash sync). If you are handholding

the camera, keep it steady to prevent camera shake. Using a tripod is

recommended.

To prevent a slow shutter speed, under [53: Custom Functions

(C.Fn)], set [3: Flash sync. speed in Av mode] to [1: 1/200-1/60sec.

auto] or [2: 1/200sec. (fixed)] (p.261).

The aperture opening (diaphragm) changes only at the moment when

the picture is taken. Otherwise, the aperture remains fully open.

Therefore, when you look at the scene through the viewfinder or on the

LCD monitor, the depth of field will look narrow. With the procedure

below, you can check the depth of field before taking the picture.

1Enable depth-of-field preview to be used.

Under [53: Custom Functions (C.Fn)], set [9: Assign SET

button] to [4: Depth-of-field preview] (p.266).

For details about Custom Function settings, see page 258.

2Exit the menu.

Press the <M> button two times to exit the menu.

3Press the <0> button.



The aperture will be stopped down so you can see the depth of field.

D Using the Built-in Flash

3 Depth-of-Field PreviewN

While looking at the Live View image (p.140) and holding down the <

button, you can change the aperture and see how the depth of field changes.

113

You can set both the shutter speed and aperture manually as desired.

While referring to the exposure level indicator in the viewfinder, you can

set the exposure as desired. This method is called manual exposure.

* <a> stands for Manual.

1Set the Mode Dial to <a>.

2Set the ISO speed (p.92).

Set the shutter speed and aperture.

To set the shutter speed, turn the

<6> dial.



To set the aperture, hold down the

> button and turn the <

> dial.

4Focus on the subject.

Press the shutter button halfway.

The exposure setting will be

displayed in the viewfinder.



The exposure level mark <

> indicates

how far the current exposure level is

from the standard exposure level.

5Set the exposure and take the picture.

Set the shutter speed and aperture as desired.

If the exposure level exceeds ±2 stops from the standard

exposure, the end of the exposure level indicator will display

or <J> in the viewfinder. (On the LCD monitor, if the exposure

level exceeds ±3 stops, the <N> icon will blink at where <-3> or

<+3> is displayed.)

a: Manual Exposure

<6>

Exposure level mark

Standard exposure index

If [z2: Auto Lighting Optimizer] (p.123) is set to any setting other

than [Disable], the image may still look bright even if a darker exposure

has been set.

If ISO Auto is set, the ISO speed setting will change to suit the shutter

speed and aperture in order to obtain the standard exposure. Therefore,

you may not obtain the desired exposure effect.

a: Manual Exposure

114

To obtain the correct flash exposure on the main subject, the flash

output will be set automatically (autoflash) to match the manually-set

aperture. The shutter speed can be set from 1/200 sec. to 30 sec. or to

bulb.

A bulb exposure keeps the shutter open

for as long as you hold down the shutter

button. It can be used to shoot fireworks

and other subjects requiring long

exposures.

In step 3 on the preceding page, turn the

<6> dial to the left to set <BULB>.

The elapsed exposure time will be

displayed on the LCD monitor.

I Using the Built-in Flash

BULB: Bulb Exposures

Elapsed exposure time

Do not point the camera toward an intense light source, such as the sun

or an intense artificial light source. Doing so may damage the image

sensor or the camera’s internal components.

Since long bulb exposures produce more noise than usual, the image

may look slightly grainy.

You can reduce the noise due to long exposures by setting [4: Long exp.

noise reduction] under [53: Custom Functions (C.Fn)] to [1: Auto] or

[2: On] (p.262).

If ISO Auto is set for a bulb exposure, the ISO speed will be fixed at ISO

800 (p.94).

For bulb exposures, using a tripod and a remote switch (sold separately,

p.271) is recommended.

115

Three methods (metering modes) to measure the subject’s brightness

are provided. Normally, evaluative metering is recommended.

In Basic Zone modes, metering mode is set automatically.

1Select [Metering mode].

Under the [z2] tab, select [Metering

mode], then press <0>.

2Set the metering mode.

Select the desired metering mode,

then press <0>.

q Evaluative metering

General-purpose metering mode suited even

for backlit subjects. The camera sets the

exposure automatically to suit the scene.

w Partial metering

Effective where there are much brighter lights

around the subject due to backlight, etc. The

gray area in the left figure is approximately

where the brightness is metered to obtain the

standard exposure.

e Center-weighted average metering

The brightness is metered at the image center

and then averaged for the entire scene. This

metering mode is for advanced users.

q Changing the Metering ModeN

With q (Evaluative metering), the exposure setting will be locked when you

press the shutter button halfway and focus is achieved. In the w (Partial

metering) and e (Center-weighted average metering) modes, the

exposure is set at the moment the picture is taken. (Pressing the shutter

button halfway does not lock the exposure.)

116

Set exposure compensation if the exposure (without flash) does not

come out as desired. This feature can be used in Creative Zone modes

except <a>. You can set the exposure compensation up to ±5 stops in

1/3-stop increments.

Making it brighter

Hold down the <O> button and

turn the <6> dial to the right

(increased exposure).

Making it darker

Hold down the <O> button and

turn the <6> dial to the left

(decreased exposure).

As shown in the figure, the exposure

level is displayed on the LCD monitor

and in the viewfinder.

After taking the picture, cancel the

exposure compensation by setting

it back to 0.

Setting Exposure CompensationN

O Setting Exposure Compensation

Increased exposure for a brighter image

Decreased exposure for a darker image

The exposure compensation amount displayed in the viewfinder goes up

to only ±2 stops. If the exposure compensation amount exceeds ±2

stops, the end of the exposure level indicator will display or <J>.

If you want to set exposure compensation exceeding ±2 stops, setting it

with [z2: Expo.comp./AEB] (p.118) or with the Quick Control (p.48) is

recommended.

Dark exposure Increased exposure for a brighter image

117

Setting Exposure CompensationN

Set flash exposure compensation if the flash exposure of the subject

does not come out as desired. You can set the flash exposure

compensation up to ±2 stops in 1/3-stop increments.

1Press the <Q> button (7).

The Quick Control screen will appear

(p.48).

2Select [y].

Press the <S> cross keys to select

[y*].

[Flash exposure comp.] will be

displayed at the bottom.

3Set the flash exposure

compensation amount.

If the exposure is too dark, turn the

<6> dial to the right (for increased

exposure).

If the exposure is too bright, turn the

<6> dial to the left (for decreased

exposure).

When you press the shutter button halfway, the <y> icon will

appear in the viewfinder.

After taking the picture, cancel the flash exposure

compensation by setting it back to 0.

y Setting Flash Exposure Compensation

If [z2: Auto Lighting Optimizer] (p.123) is set to any setting other than

[Disable], the image may still look bright even if a decreased exposure

compensation or decreased flash exposure compensation is set.

You can also set flash exposure compensation with [Built-in flash func.

setting] in [z1: Flash control] (p.199).

118

This feature takes exposure compensation a step further by varying the

exposure automatically (up to ±2 stops in 1/3-stop increments) with

three shots as shown below. You can then choose the best exposure.

This is called AEB (Auto Exposure Bracketing).

1Select [Expo.comp./AEB].



Under the [

] tab, select

[

Expo.comp./AEB

], then press <

2Set the AEB range.

Turn the <6> dial to set the AEB

range.

Press the <Y> <Z> keys to set the

exposure compensation amount. If

AEB is combined with exposure

compensation, AEB will be applied

centering on level of exposure

compensation.

Press <0> to set it.

When you press the <M> button

to exit the menu, the AEB range will

be displayed on the LCD monitor.

3Take the picture.

Focus and press the shutter button

completely. The three bracketed

shots will be taken in this sequence:

standard exposure, decreased

exposure, and increased exposure.

3 Auto Exposure BracketingN

Standard exposure Darker exposure

(Decreased exposure)

Brighter exposure

(Increased exposure)

AEB range

119

3 Auto Exposure BracketingN

Follow steps 1 and 2 to turn off the AEB range display.

The AEB setting will also be canceled automatically if the power

switch is set to <2>, flash recycling is completed, etc.

Using AEB with continuous shooting

If continuous shooting (p.102) is set and you press the shutter

button completely, the three bracketed shots will be taken

continuously in this sequence: standard exposure, decreased

exposure, and increased exposure.

Using AEB with single shooting (u)

Press the shutter button three times to take the three bracketed

shots. The three bracketed shots will be taken in the following

sequence: standard exposure, decreased exposure, and increased

exposure.

Using AEB with the self-timer

With the self-timer <j> <l> (p.103), you can take three

continuous shots after a delay of approx. 10 sec. or approx. 2 sec.

With <q> (p.103) set, the number of continuous shots will be three

times the number set.

Canceling AEB

Shooting Tips

AEB will not work with flash or bulb exposures.

If [z2: Auto Lighting Optimizer] (p.123) is set to any setting other

than [Disable], the effect of AEB may be reduced.

120

You can lock the exposure when the area of focus is to be different from

the exposure metering area or when you want to take multiple shots at

the same exposure setting. Press the <A> button to lock the exposure,

then recompose and take the picture. This is called AE lock. It is

effective for shooting backlit subjects, etc. This feature can be used in

Creative Zone modes except <a>.

1Focus on the subject.

Press the shutter button halfway.



The exposure setting will be displayed.

2Press the <A> button (0).

The <A> icon lights up in the

viewfinder to indicate that the

exposure setting is locked (AE lock).

Each time you press the <A> button,

the current exposure setting is

locked.

3Recompose and take the picture.

If you want to take more pictures

while maintaining the AE lock, keep

holding down the <A> button and

press the shutter button to take

another picture.

* When the lens’s focus mode switch is set to <MF>, AE lock is implemented with

the exposure weighting centered on the center AF point.

A Locking the ExposureN

AE Lock Effects

Metering Mode

(p.115)

AF Point Selection Method (p.99)

Automatic Selection Manual Selection

q*AE lock is applied at the AF

point that achieved focus.

AE lock is applied at the

selected AF point.

we AE lock is applied to the center AF point.

121

If the subject is on the side of the frame and you use flash, the subject

may turn out to be too bright or dark depending on the background, etc.

Use FE lock in such a case. After setting the flash output for the

appropriate subject brightness, you can recompose (put the subject

toward the side) and shoot. This feature can also be used with a Canon

EX-series Speedlite.

* FE stands for Flash Exposure.

1Press the <D> button.

The built-in flash will be raised.

Press the shutter button halfway and

look in the viewfinder to check that

the <D> icon is lit.

2Focus on the subject.

3Press the <A> button (8).



Aim the viewfinder center over the

subject where you want to lock the flash

exposure, then press the <

> button.

The flash will fire a preflash and the

required flash output is calculated

and retained in memory.

In the viewfinder, “FEL” is displayed

for a moment and <d> will light up.

Each time you press the <A> button,

a preflash is fired and the required

flash output is calculated and retained

in memory.

4Take the picture.

Compose the shot and press the

shutter button completely.

The flash is fired, and the picture is

taken.

A Locking the Flash ExposureN

122



If the subject is too far away and the captured image comes out dark, the

> icon will blink. Move closer to the subject and repeat steps 2 to 4.

FE lock is not possible during Live View shooting.

123

If the image comes out dark or the contrast is low, the brightness and

contrast can be corrected automatically. This function is called Auto

Lighting Optimizer. The default setting is [Standard]. With JPEG

images, the correction is applied when the image is captured.

In Basic Zone modes, [Standard] is set automatically.

1Select [Auto Lighting Optimizer].

Under the [z2] tab, select [Auto

Lighting Optimizer], then press

<0>.

2Select the setting.

Select the desired setting, then press

<0>.

3Take the picture.

The image will be recorded with the

brightness and contrast corrected if

necessary.

Auto Correction of Brightness and Contrast

Under [53: Custom Functions (C.Fn)], if [6: Highlight tone priority] is

set to [1: Enable], the Auto Lighting Optimizer will be set automatically to

[Disable], and the setting cannot be changed.

If the Auto Lighting Optimizer’s effect is too strong and the image is too

bright, set [Low] or [Disable].

If a setting other than [Disable] is set and you use exposure

compensation or flash exposure compensation to darken the exposure,

the image may still come out bright. If you want a darker exposure, set

this function to [Disable].

Depending on the shooting conditions, noise may increase.

124

Due to the lens characteristics, the four corners of the picture may look

darker. This phenomenon is called lens light fall-off or drop in peripheral

illumination and can be corrected. The default setting is [Enable]. With

JPEG images, the correction is applied when the image is captured. For

RAW images, it can be corrected with Digital Photo Professional (EOS

software, p.314).

1Select [Peripheral illumin.

correct.].

Under the [z1] tab, select

[Peripheral illumin. correct.], then

press <0>.

2Select the setting.

Check that [Correction data

available] is displayed for the

attached lens.

If [Correction data not available] is

displayed, see “Lens Correction Data”

on the next page.

Select [Enable], then press <0>.

3Take the picture.

The image will be recorded with the

peripheral illumination corrected.

Correcting the Image’s Dark Corners

Correction disabled Correction enabled

125

3 Correcting the Image’s Dark Corners

The camera already contains lens peripheral illumination correction

data for approx. 30 lenses. In step 2, if you select [Enable], the

peripheral illumination correction will be applied automatically for any

lens whose correction data has been registered in the camera.

With EOS Utility (EOS software, p.314), you can check which lenses

have their correction data registered in the camera. You can also

the EOS Utility Instruction Manual.

Lens Correction Data

Peripheral illumination correction cannot be applied to JPEG images

already taken.

Depending on shooting conditions, noise may appear on the image

periphery.

When using a non-Canon lens, setting the corrections to [Disable] is

recommended even if [Correction data available] is displayed.

If you use the magnified view during Live View shooting, the peripheral

illumination correction will not be reflected in the image displayed on the

screen.

If the effect of the correction is not visible, magnify the image after

shooting and check it again.

Corrections can be applied even when an Extender or Life-size

Converter is attached.

If the correction data for the attached lens is not registered to the

camera, the result will be the same as when the correction is set to

[Disable].

The correction amount applied will be slightly lower than the maximum

correction amount settable with Digital Photo Professional (EOS

software).

The correction amount will be less if the lens used does not have

distance information.

The higher the ISO speed, the lower the correction amount will be.

126

You can customize a Picture Style by adjusting individual parameters

such as [Sharpness] and [Contrast] from the default. To see the

resulting effects, take test shots. To customize [Monochrome], see

page 128.

1Select [Picture Style].

Under the [z2] tab, select [Picture

Style], then press <0>.

The Picture Style selection screen will

appear.

2Select a Picture Style.

Select a Picture Style, then press the

button.

3Select a parameter.

Select a parameter such as

[Sharpness], then press <0>.

4Set the parameter.

Press the <Y> <Z> keys to adjust

the parameter as desired, then press

<0>.

Press the <M> button to save the

adjusted parameters. The Picture

Style selection screen will reappear.

Any parameter settings different from

the default will be displayed in blue.

A Customizing Image CharacteristicsN

By selecting [Default set.] in step 3, you can revert the parameter

settings of the respective Picture Style to their defaults.

To shoot with the Picture Style you adjusted, follow step 2 on page 95 to

select the adjusted Picture Style, then shoot.

127

A Customizing Image CharacteristicsN

Sharpness

Adjusts the sharpness of the subject.

To make it less sharp, set it toward the E end. The closer it is to E,

the softer the image will look.

To make it sharper, set it toward the F end. The closer it is to F, the

sharper the image will look.

Contrast

Adjusts the image contrast and the vividness of colors.

To decrease the contrast, set it toward the minus end. The closer it is

to G, the more muted the image will look.

To increase the contrast, set it toward the plus end. The closer it is to

H, the crisper the image will look.

Saturation

Adjusts the color saturation in the image.

To decrease the color saturation, set it toward the minus end.

The closer it is to G, the more diluted the colors will look.

To increase the color saturation, set it toward the plus end. The

closer it is to H, the bolder the colors will look.

Color tone

Adjusts the color tone of skin.

To make the skin tone redder, set it toward the minus end. The

closer it is to G, the redder the skin tone will look.

To reduce skin redness, set it toward the plus end. The closer it is to

H, the more yellow the skin tone will look.

Parameter Settings and Effects

A Customizing Image CharacteristicsN

128

For Monochrome, you can also set [Filter effect] and [Toning effect] in

addition to [Sharpness] and [Contrast] explained on the preceding

page.

kFilter Effect

With a filter effect applied to a

monochrome image, you can make

white clouds or green trees stand out

more.

lToning Effect

By applying a toning effect, you can

create a monochrome image in that

color. It can make the image look more

impressive.

The following can be selected: [N:None],

[S:Sepia], [B:Blue], [P:Purple] or

[G:Green].

V Monochrome Adjustment

Filter Sample Effects

N: None Normal black-and-white image with no filter effects.

Ye: Yellow The blue sky will look more natural, and the white clouds will look

crisper.

Or: Orange The blue sky will look slightly darker. The sunset will look more

brilliant.

R: Red The blue sky will look quite dark. Fall leaves will look crisper and

brighter.

G: Green Skin tones and lips will appear muted. Green tree leaves will look

crisper and brighter.

Increasing the [Contrast] will make the filter effect more pronounced.

129

You can select a base Picture Style such as [Portrait] or [Landscape],

adjust its parameters as desired and register it under [User Def. 1],

[User Def. 2], or [User Def. 3].

You can create multiple Picture Styles with different settings for

parameters such as sharpness and contrast.

You can also adjust the parameters of a Picture Style that is registered

to the camera with EOS Utility (EOS software, p.314).

1Select [Picture Style].

Under the [z2] tab, select [Picture

Style], then press <0>.

The Picture Style selection screen will

appear.

2Select [User Def. *].

Select [User Def. *], then press the

button.

The Detail setting screen will appear.

3Press <0>.

With [Picture Style] selected, press

<0>.

4Select the base Picture Style.



Press the <

> <

> keys to select the

base Picture Style, then press <

To adjust the parameters of a Picture

Style that is registered to the camera

with EOS Utility (EOS software),

select the Picture Style here.

Registering Preferred Image Characteristics

A Registering Preferred Image CharacteristicsN

130

5Select a parameter.

Select a parameter such as

[Sharpness], then press <0>.

6Set the parameter.

Press the <Y> <Z> keys to adjust

the parameter as desired, then press

<0>.

For details, see “Customizing Image

Characteristics” on pages 126-128.



Press the <

> button to register the

modified Picture Style. The Picture Style

selection screen will then reappear.

The base Picture Style will be

indicated on the right of [User Def. *].

If the settings in a Picture Style

registered under [User Def. *] have

been modified from the base Picture

Style settings, the Picture Style’s

name will be displayed in blue.

If a Picture Style has already been registered under [User Def. *],

changing the base Picture Style in step 4 will nullify the parameter

settings of the registered Picture Style.

If you perform [Clear all camera settings] (p.194), all the [User Def. *]

settings will revert to their defaults. Any Picture Style registered via EOS

Utility (EOS software) will have only its modified parameters reverted to

the default setting.

To shoot with a registered Picture Style, follow step 2 on page 95 to

select [User Def. *], then shoot.

Regarding the procedure to register a Picture Style file to the camera,

refer to the EOS Utility Instruction Manual.

131

The function adjusting the color tone so that white objects look white in

the picture is called white balance (WB). Normally, the Auto [Q]

(Ambience priority) or [Qw] (White priority) setting will obtain the

correct white balance. If natural-looking colors cannot be obtained with

Auto, you can select the white balance to match the light source or set it

manually by shooting a white object.

In Basic Zone modes, [Q] (Ambience priority) is set automatically. (In

the mode, [Qw] (White priority) is set.)

1Press the <XB> button.

[White balance] will appear.

2Select a white balance setting.

Press the <Y> <Z> keys or turn the

<6> dial to select the desired

setting, then press <0>.

The “Approx. ****K” (K: Kelvin)

displayed for the white balance

settings <W>, <E>, <R>, <Y>

or is the respective color

temperature.

B: Matching the Light SourceN

132

With [Q] (Ambience priority), you can increase the intensity of the

image’s warm color cast when shooting a tungsten-light scene. If you

select [Qw] (White priority), you can reduce the intensity of the

image’s warm color cast.

If you want to match the Auto white balance of previous EOS camera

models, select [Q] (Ambience priority).

1Press the <XB> button.

[White balance] will appear.

2Select [Q].

Select [Q], then press the

button.

3Select the desired item.

Select [Auto: Ambience priority] or

[Auto: White priority], then press

<0>.

Q: Auto: Ambience priority

Qw: Auto: White priority

Q Setting the Auto White Balance

Cautions for Setting [Qw] (White priority)

The warm color cast of subjects may fade.

When multiple light sources are included on the screen, the warm color

cast of the picture may not be lessened.

When using flash, the color tone will be the same as [Q] (Ambience

priority).

133

B: Matching the Light SourceN

Custom white balance enables you to manually set the white balance

for a specific light source. Make sure to perform this procedure under

the light source at the actual location of the shoot.

1Shoot a white object.

A plain, white object should fill the

viewfinder’s center.

Focus manually and shoot with the

standard exposure set for the white

object.

You can use any white balance

setting.

2Select [Custom White Balance].

Under the [z2] tab, select [Custom

White Balance], then press <0>.

The custom white balance selection

screen will appear.

3Import the white balance data.

Select the image that was captured in

step 1, then press <0>.

On the dialog screen that appears,

select [OK], and the data will be

imported.

When the menu reappears, press the

<M> button to exit the menu.

O Custom White Balance

B: Matching the Light SourceN

134

4Select [O (Custom)].

Press the <XB> button.

Select [O (Custom)], then press

<0>.

If the exposure obtained in step 1 differs greatly from the standard

exposure, a correct white balance may not be obtained.

In step 3, the following images cannot be selected: Images captured with

the Picture Style set to [Monochrome] (p.96), images processed with a

Creative filter, or images shot with another camera.

135

You can correct the white balance that is set. This adjustment will have

the same effect as using a commercially-available color temperature

conversion filter or color compensating filter. Each color can be

corrected to one of nine levels.

This function is for advanced users, particularly for those users who

understand the use of color temperature conversion and color

compensating filters and their effects.

1Select [WB Shift/Bkt.].

Under the [z2] tab, select [WB

Shift/Bkt.], then press <0>.

The WB correction/WB bracketing

screen will appear.

2Set the white balance correction.

Press the <S> cross keys to move

the “ ” mark to the desired position.



B is for blue, A for amber, M for

magenta, and G for green. The image’s

color balance will be adjusted toward

the color in the direction of the move.

On the right of the screen, “Shift”

indicates the direction and correction

amount, respectively.



Pressing the <

> button will

cancel all the [

WB Shift/Bkt.

] settings.

Press <0> to exit the setting and

return to the menu.

Adjusting the Color Tone for the Light Source

White Balance Correction

Sample setting: A2, G1

When the white balance is corrected, will be displayed in the

viewfinder and on the LCD monitor.

One level of the blue/amber correction is equivalent to approx. 5 mireds

of a color temperature conversion filter. (Mired: Measuring unit indicating

the density of a color temperature conversion filter.)

u Adjusting the Color Tone for the Light SourceN

136

With just one shot, three images with different color tones can be recorded

simultaneously. Based on the color temperature of the current white balance

setting, the image will be bracketed with a blue/amber bias or magenta/

green bias. This is called white balance bracketing (WB Bkt.). White balance

bracketing is possible up to ±3 levels in single-level increments.

Set the white balance bracketing

amount.

In step 2 for “White Balance

Correction”, when you turn the <6>

dial, the “ ” mark on the screen will

change to “ ” (3 points).

Turning the dial to the right sets the B/

A bracketing, and turning it to the left

sets the M/G bracketing.



On the right, “

Bracket

” indicates the

bracketing direction and correction amount.



Pressing the <

> button will cancel

all the [

WB Shift/Bkt.

] settings.

Press <0> to exit the setting and

return to the menu.

Bracketing Sequence

The images will be bracketed in the following sequence: 1. Standard

white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard

white balance, 2. Magenta (M) bias, and 3. Green (G) bias.

White Balance Auto Bracketing

B/A bias ±3 levels

During WB bracketing, the maximum burst for continuous shooting will be lower and the

number of possible shots will also decrease to approx. one-third the normal number.

You can also set white balance correction and AEB together with white

balance bracketing. If you set AEB in combination with white balance

bracketing, a total of nine images will be recorded for a single shot.

Since three images are recorded for one shot, it takes longer to record

the image on the card.

During Live View shooting, the white balance icon will blink.

“Bkt.” stands for bracketing.

137

The range of reproducible colors is called “color space”. With this

camera, you can set the color space for captured images to sRGB or

Adobe RGB. For normal shooting, sRGB is recommended.

In Basic Zone modes, sRGB is set automatically.

1Select [Color space].

Under the [z2] tab, select [Color

space], then press <0>.

2Set the desired color space.

Select [sRGB] or [Adobe RGB], then

press <0>.

This color space is mainly used for commercial printing and other

industrial uses. This setting is not recommended if you are not familiar

with image processing, Adobe RGB, and Design rule for Camera File

System 2.0 (Exif 2.21 or higher). The image will look very subdued in an

sRGB computer environment and with printers not compliant to Design

rule for Camera File System 2.0 (Exif 2.21 or higher). Post-processing

of the image with computer software will therefore be required.

Setting the Color Reproduction Range

Adobe RGB

If the captured still photo was shot in the Adobe RGB color space, the

first character in the file name will be an underscore “_”.

The ICC profile is not appended. For explanations about the ICC profile,

refer to the Digital Photo Professional Instruction Manual.

138

139

Shooting with the LCD Monitor

(Live View Shooting)

You can shoot while viewing the picture on the camera’s

LCD monitor. This is called “Live View shooting”.

Live View shooting is effective for still subjects which do

not move.

If you handhold the camera and shoot while viewing the

LCD monitor, camera shake can cause blurred images.

Using a tripod is recommended.

Remote Live View Shooting

With EOS Utility (EOS software, p.314) installed on your computer,

you can connect the camera to the computer and shoot remotely

while viewing the computer screen. For details, refer to the EOS

Utility Instruction Manual.

140

1Display the Live View image.

Press the <A> button.

The Live View image will appear on

the LCD monitor.

The Live View image will closely

reflect the brightness level of the

actual image you capture.

2Focus on the subject.

When you press the shutter button

halfway, the camera will focus with

the current AF method (p.148).

3Take the picture.

Press the shutter button completely.

The picture is taken and the captured

image is displayed on the LCD

monitor.

When the playback display ends, the

camera will return to Live View

shooting automatically.

Press the <A> button to exit the

Live View shooting.

A Shooting with the LCD Monitor

The image’s field of view is approx. 100% (with image-recording quality

set to JPEG 73 and aspect ratio set to 3:2).

During Live View shooting, the camera will shoot with One-Shot AF

(p.97) in all shooting modes.

The metering mode will be fixed to evaluative metering for Live View

shooting.

In Creative Zone modes, you can check the depth of field by setting [9:

Assign SET button] under [53: Custom Functions (C.Fn)] to [4:

Depth-of-field preview] and pressing <0>.

During continuous shooting, the exposure set for the first shot will also

be applied to the subsequent shots.

141

A Shooting with the LCD Monitor

Set [Live View shoot.] to [Enable].

In Basic Zone modes, the Live View

menu options will be displayed under

[z2], and in Creative Zone modes, they

will be displayed under [z4].

Number of Possible Shots with Live View Shooting

The figures above are based on a fully-charged Battery Pack LP-E10 and CIPA

(Camera & Imaging Products Association) testing standards.

With a fully-charged Battery Pack LP-E10, the total time available for Live View

shooting is approx. 2 hr. 10 min. at room temperature (23°C / 73°F).

Enabling Live View Shooting

Temperature Room Temperature

(23°C / 73°F)

Low Temperatures

(0°C / 32°F)

No Flash Approx. 260 shots Approx. 250 shots

50% Flash Use Approx. 240 shots Approx. 230 shots

Do not point the camera toward an intense light source, such as the sun

or an intense artificial light source. Doing so may damage the image

sensor or the camera’s internal components.

General Live View Shooting Cautions are on pages 157-158.



When flash is used, there will be two shutter sounds, but only one shot will

be taken. Also, the time it takes to capture an image after you press the

shutter button completely will be slightly longer than with viewfinder shooting.

If the camera is not operated for a prolonged period, the power will turn

off automatically after the time set in [51: Auto power off] (p.185).

If [51: Auto power off] is set to [Disable], Live View shooting will end

automatically after approx. 30 min. (camera power remains on).

With an HDMI cable (sold separately), you can display the Live View

image on a TV set (p.226). Note that no sound will be output.

Do not allow the product to maintain contact with the same area of

skin for extended periods of time during use.

This may result in low-temperature contact burns, including skin redness and

blistering, even if the product does not feel hot. The use of a tripod or similar

equipment is recommended when using the product in hot places and for

people with circulation problems or less sensitive skin.

A Shooting with the LCD Monitor

142

Each time you press the button, the information display will

change.

Information Display

AF method

•d: FlexiZone - Single

•c: u Live mode

•f: Quick mode

Magnifying frame

ISO speed

Exposure level indicator/AEB range

Aperture

Shutter speed

Picture Style

Battery level

Exposure

simulation

Image-recording

quality

White balance

yFlash exposure

compensation

0External flash exposure

compensation

AF point (Quick mode)

FEB

AEB

Highlight tone priority

Histogram display

Drive/self-timer

AE lock

D Flash-ready

b Flash Off

e High-speed sync

Auto Lighting

Optimizer

Possible shots

GPS connection indicator

Shooting mode

Eye-Fi card transmission status

Temperature

warning

143

A Shooting with the LCD Monitor

Final image simulation is a function that shows the Live View image as

it will look with the current settings for Picture Style, white balance, and

other shooting functions applied.

During shooting, the Live View image will automatically reflect the

function settings listed below. However, it may be slightly different from

the resulting image.

Final Image Simulation During Live View Shooting

Picture Style

* All settings such as sharpness, contrast, color saturation, and color tone will

be reflected.

White balance

White balance correction

Ambience-based shots

Lighting/scene-based shots

Color tone (in mode)

Exposure

Depth of field (with C.Fn-9-4 set and <0> ON)

Auto Lighting Optimizer

Peripheral illumination correction

Highlight tone priority

Aspect ratio (shooting range confirmation)

Final Image Simulation

When <g> is displayed in white, it indicates that the Live View image

brightness is close to what the captured image will look like.



If <

> is blinking, it indicates that the Live View image is displayed at

a brightness that differs from the actual shooting result because of low- or

bright-light conditions. However, the actual image recorded will reflect the

exposure setting. Note that noise may be more noticeable than the actual

image recorded.

If flash is used or bulb exposure is set, the <g> icon and histogram

will be grayed out (for your reference). The image will be displayed on

the LCD monitor at the standard brightness. The histogram may not be

properly displayed in low- or bright-light conditions.

144

Function settings particular to Live View shooting are explained here.

If you press the <Q> button while the image is displayed on the LCD

monitor in a Creative Zone mode, you can set any of the following: AF

method, Drive/self-timer, White balance, Picture Style, Auto Lighting

Optimizer, Image-recording quality, and ISO speed. In Basic Zone

modes, you can set the functions shown in the table on page 75, as well

as the functions in bold above.

1Press the <Q> button (7).

The functions settable with Quick

Control will appear on the left of the

screen.

If the AF method is <f>, the AF

point will also be displayed. You can

also select the AF point (p.154).

2Select a function and set it.

Press the <W> <X> keys to select a

function.

The settings of the selected function

and Feature guide (p.55) will appear.

Press the <Y> <Z> keys or turn the

<6> dial to set the function.

Pressing <0> will display the

respective function setting screen.

To set Auto white balance, select

[Q], press <0>, then press the

button.

3Exit the setting.

Press the <Q> button to return to

Live View shooting.

Shooting Function Settings

Q Quick Control

In Creative Zone modes, if [10: Flash button function] is set to [1: ISO

speed] under [53: Custom Functions (C.Fn)], you can raise the built-in

flash with Quick Control. The ISO speed will be set with the <D> button.

145

The menu options displayed are as

follows.

The settable functions on this menu

screen apply only to Live View

shooting. They do not work with

viewfinder shooting (settings are

disabled).

In Basic Zone modes, the Live View

menu options will be displayed under

[z2], and in Creative Zone modes, they

will be displayed under [z4].

Live View shooting

You can set Live View shooting to [Enable] or [Disable].

AF method

You can select [FlexiZone - Single], [u Live mode], or [Quick

mode]. See pages 148-155 for more about the AF method.

Grid display

With [Grid 1l] or [Grid 2m], you can display grid lines. You can

check horizontal or vertical tilt when shooting.

Menu Function Settings

146

Aspect ratioN

The image’s aspect ratio can be set to [3:2], [4:3], [16:9], or [1:1].

The area surrounding the image area is masked in black when the

following aspect ratios are set: [4:3] [16:9] [1:1].

JPEG images will be saved with the set aspect ratio. RAW images

will always be saved with the [3:2] aspect ratio. The selected aspect

ratio information is added to the RAW image file. When you process

the RAW image with the EOS software, this allows you to generate

an image with the same aspect ratio that was set for shooting. In the

case of the [4:3], [16:9], and [1:1] aspect ratios, the lines to indicate

the aspect ratio will appear during image playback, but they are not

actually drawn on the image.

Image

Quality

Aspect Ratio and Pixel Count (Approx.)

3:2 4:3 16:9 1:1

36000x4000

(24.0 megapixels)

5328x4000*

(21.3 megapixels)

6000x3368*

(20.2 megapixels)

4000x4000

(16.0 megapixels)

43984x2656

(10.6 megapixels)

3552x2664

(9.5 megapixels)

3984x2240*

(8.9 megapixels)

2656x2656

(7.1 megapixels)

a2976x1984

(5.9 megapixels)

2656x1992

(5.3 megapixels)

2976x1680*

(5.0 megapixels)

1984x1984

(3.9 megapixels)

b1920x1280

(2.5 megapixels)

1696x1280*

(2.2 megapixels)

1920x1080

(2.1 megapixels)

1280x1280

(1.6 megapixels)

c720x480

(350,000 pixels)

640x480

(310,000 pixels)

720x408*

(290,000 pixels)

480x480

(230,000 pixels)

The asterisked image-recording quality settings do not match the

respective aspect ratio exactly.

The image area displayed for the asterisked aspect ratio may be slightly

different from the actual image area. Check the captured images on the

LCD monitor when shooting.

If you use a different camera to directly print images shot with this

camera in the 1:1 aspect ratio, the images may not be correctly printed.

147

Menu Function Settings

Metering timerN

You can change how long the exposure setting is displayed (AE lock

time). In Basic Zone modes, metering timer is fixed at 8 sec.

Any of the following operations will stop Live View shooting. To start Live

View shooting again, press the <A> button again.

• Selecting [z3: Dust Delete Data], [52: Clean manually], [53: Clear

settings], or [53: Firmware Ver.]

• Switching the shooting mode (between a Basic Zone mode and a Creative

Zone mode).

148

You can select an AF method to suit the shooting conditions and your

subject. The following AF methods are provided: [FlexiZone - Single],

[u Live mode] (face detection, p.149), and [Quick mode] (p.154).

If you want to achieve precise focus, set the lens’s focus mode switch to

<MF>, magnify the image, and focus manually (p.156).

Select the AF method.

Under the [z4] tab, select [AF

method]. (In Basic Zone modes, it is

under the [z2] tab.)

Select the desired AF method, then

press <0>.

While the Live View image is

displayed, you can also press the

<Q> button to select the AF method

with the Quick Control (p.144).

The image sensor is used to focus. Although AF is possible with the

Live View image displayed, the AF operation will take longer than

with the Quick mode. Also, achieving focus may be more difficult than

with the Quick mode.

1Display the Live View image.

Press the <A> button.

The Live View image will appear on

the LCD monitor.

The AF point < > will appear.

2Move the AF point.

Press the <S> cross keys to move

the AF point to where you want to

focus. (It cannot be moved to the

edge of the screen.)

Press <0> to return the AF point to the center. (If C.Fn-9 is set,

hold down the <O/L> button and press <0>.)

Using AF to Focus (AF Method)

Selecting the AF Method

FlexiZone - Single: d

AF point

149

Using AF to Focus (AF Method)

3Focus on the subject.

Aim the AF point over the subject and

press the shutter button halfway.

When focus is achieved, the AF point

will turn green and the beeper will

sound.

If focus is not achieved, the AF point

will turn orange.

4Take the picture.

Check the focus and exposure, then

press the shutter button completely to

take the picture (p.140).

Human faces are detected and focused on with the same AF method as

FlexiZone - Single. Have the person whose picture you want to take

face the camera.

1Display the Live View image.

Press the <A> button.

The Live View image will appear on

the LCD monitor.

2Check the AF point.

When a face is detected, the

frame will appear on the face for

focusing.

If multiple faces are detected, <q>

will be displayed. Use the <Y> <Z>

keys to move the <q> frame over

the face you want to focus on.

u (Face detection) Live Mode: c

Using AF to Focus (AF Method)

150

3Focus on the subject.

Press the shutter button halfway and

the camera will focus on the face

covered by the frame.

When focus is achieved, the AF point

will turn green and the beeper will

sound.

If focus is not achieved, the AF point

will turn orange.

If a face cannot be detected, the AF

point < > will be displayed and AF

will be executed at the center.

4Take the picture.

Check the focus and exposure, then

press the shutter button completely to

take the picture (p.140).

If the subject’s face is significantly out of focus, face detection will not be

possible. If the lens enables manual focusing even while the lens’s focus

mode switch is set to <f>, turn the focusing ring to attain rough focus.

The face will then be detected and will be displayed.

An object other than a human face may be detected as a face.



Face detection will not work if the face is very small or large in the picture,

too bright or too dark, tilted horizontally or diagonally, or partially hidden.

The may cover only a part of the face, not the whole face.



When you press <

>, the AF method will switch to [

FlexiZone - Single

]

(p.148). You can then press the <

> cross keys to move the AF point.

Press <

> again to return to [

u(Face detection) Live Mode

]. (If C.Fn-9

is set, hold down the <

> button and press <

>.)

Since AF is not possible with a face detected near the edge of the

picture, the will be grayed out. Then if you press the shutter button

halfway, the center AF point < > will be used to focus.

151

Using AF to Focus (AF Method)

AF Operation

Focusing will take longer than with [Quick mode].

Even when focus is achieved, pressing the shutter button halfway

will focus again.

You cannot focus on a moving subject continuously.

The image brightness may change during and after the AF

operation.

If the light source changes while the Live View image is displayed,

the screen may flicker and focusing may be difficult. If this happens,

exit Live View shooting and execute AF under the actual light

source.

When [FlexiZone - Single] is set and you press the button, the

area covered by the AF point will be magnified. Press the shutter

button halfway to focus in the magnified view. This is effective when

the camera is attached to a tripod and you need to attain very

precise focus. If focusing is difficult in magnified view, return to the

normal display and use AF. Note that the AF speed may differ

between the normal and magnified views.

If you magnify the view after focusing with [FlexiZone - Single] in

the normal view, precise focus may not be achieved.

If [u Live mode] is set, magnified view is not possible.

Notes for [FlexiZone - Single] and [u Live mode]

Magnified View

Using AF to Focus (AF Method)

152

Shooting Conditions that Make Focusing Difficult

Low-contrast subjects such as the blue sky, solid-color flat surfaces

or when highlight or shadow details are lost.

Subjects in low light.

Stripes and other patterns where there is contrast only in the

horizontal direction.

Subjects with repetitive patterns (Example: Skyscraper windows,

computer keyboards, etc.).

Fine lines and subject outlines.

Under a light source whose brightness, color, or pattern keeps

changing.

Night scenes or points of light.

The image flickers under fluorescent or LED lighting.

Extremely small subjects.

Subjects at the edge of the picture.

Strongly backlit or reflective subjects (Example: Car with a highly

reflective body, etc.).

The AF point covers both near and distant subjects (Example:

Animal in a cage, etc.).

Subjects that keep moving within the AF point and cannot keep still

due to camera shake or subject blur.

A subject approaching or moving away from the camera.

Autofocusing while the subject is very far out of focus.

Soft focus effect is applied with a soft focus lens.

A special effect filter is used.

Noise (dots of light, banding, etc.) appears on the screen during AF.

153

Using AF to Focus (AF Method)

If focus is not achieved with the shooting conditions on the preceding

page, set the lens’s focus mode switch to <MF> and focus manually.

If you use AF with any of the following lenses, using [Quick mode] is

recommended. Autofocusing with [FlexiZone - Single] or [u Live

mode] may take longer or correct focus may not be achieved.

EF50mm f/1.4 USM, EF50mm f/1.8 II, EF50mm f/2.5 Compact Macro,

EF100mm f/2.8 Macro USM, EF75-300mm f/4-5.6 III,

EF75-300mm f/4-5.6 III USM

For information on other lenses, refer to the Canon website.

If you shoot a peripheral subject and it is slightly out of focus, recompose

to move the subject (and AF point) toward the screen center, focus again

and then take the picture.

The AF-assist beam will not be emitted. However, if an EX-series

Speedlite (sold separately) equipped with an LED light is used, the LED

light will turn on for AF-assist when necessary.

In magnified view, focusing may be difficult due to camera shake. Using

a tripod is recommended.

Using AF to Focus (AF Method)

154

The dedicated AF sensor is used to focus in One-Shot AF (p.97), using

the same AF method as with viewfinder shooting.

Although you can focus on the target subject quickly, the Live View

image will be interrupted momentarily during the AF operation.

You can use nine AF points to focus (automatic selection). You can also

select one AF point to focus and focus only on the area covered by that

AF point (manual selection).

1Display the Live View image.

Press the <A> button.

The Live View image will appear on

the LCD monitor.

The small boxes on the screen are

the AF points, and the larger box is

the magnifying frame.

2Select the AF point.N

Press the <Q> button (7) to

display the Quick Control screen.

The settable functions will be

displayed on the left of the screen.

Press the <W> <X> keys to make the

AF point selectable.

Turn the <6> dial to select the AF

point.

Quick Mode: f

AF point

Magnifying frame

155

Using AF to Focus (AF Method)

3Focus on the subject.

Aim the AF point over the subject and

press the shutter button halfway.

The Live View image will turn off, the

reflex mirror will go back down, and

AF will be executed. (No picture is

taken.)

When focus is achieved, the AF point

that achieved focus will turn green

and the Live View image will

reappear.

If focus is not achieved, the AF point

will turn orange and blink.

4Take the picture.

Check the focus and exposure, then

press the shutter button completely to

take the picture (p.140).

You cannot take a picture during autofocusing. Take the picture while the

Live View image is displayed.

156

You can magnify the image and focus precisely with manual focus.

1Set the lens’s focus mode switch

to <MF>.

Turn the lens focusing ring to focus

roughly.

2Move the magnifying frame.

Press the <S> cross keys to move

the magnifying frame to the position

where you want to focus.

Press <0> to return the magnifying

frame to the center. (If C.Fn-9 is set,

hold down the <O/L> button and

press <0>.)

3Magnify the image.

Press the button.

The area within the magnifying frame

will be magnified.

Each time you press the button,

the magnification of the image will

change in the following sequence:

4Focus manually.

While looking at the magnified image,

turn the lens focusing ring to focus.

After achieving focus, press the

button to return to the normal view.

5Take the picture.

Check the focus and exposure, then

press the shutter button to take the

picture (p.140).

MF: Focusing Manually

Magnifying frame

AE lock

Magnified area position

Magnification

5x 9 10x 9 Normal view

157

General Live View Shooting Cautions

Image Quality

When you shoot at high ISO speeds, noise (such as dots of light and

banding) may become noticeable.

Shooting in high temperatures may cause noise and irregular colors in

the image.

If Live View shooting is used continuously for a prolonged period, the

camera’s internal temperature may rise, and image quality may

deteriorate. Always exit Live View shooting when you are not shooting.

If you shoot a long exposure while the camera’s internal temperature is

high, image quality may deteriorate. Exit Live View shooting and wait a

few minutes before shooting again.

White <s> and Red <E> Internal Temperature Warning Icons

If the camera’s internal temperature increases due to prolonged Live

View shooting or under a high ambient temperature, a white <s> or red

<E> icon will appear.

The white <s> icon indicates that the image quality of still photos will

deteriorate. It is recommended that you temporarily exit Live View

shooting and allow the camera to cool down before shooting again.

The red <E> icon indicates that the Live View shooting will soon stop

automatically. If this happens, you will not be able to shoot again until the

camera’s internal temperature decreases. Exit the Live View shooting or

turn off the power and let the camera rest for a while.

Using Live View shooting at a high temperature for a prolonged period

will cause the <s> or <E> icon to appear earlier. When you are not

shooting, always turn off the camera.

If the camera’s internal temperature is high, the quality of images shot

with high ISO speed or long exposure may deteriorate even before the

white <s> icon is displayed.

Shooting Results

If you take the picture in magnified view, the exposure may not come out

as desired. Return to the normal view before taking the picture. In

magnified view, the shutter speed and aperture will be displayed in

orange. Even if you take the picture in magnified view, the image area for

the normal veiw will be captured.

If you use a TS-E lens and shift or tilt the lens or use an Extension Tube,

the standard exposure may not be obtained or the exposure may be

irregular.

158

General Live View Shooting Cautions

Live View Image

Under low- or bright-light conditions, the Live View image may not reflect

the brightness of the captured image.

Even if a low ISO speed is set, noise may be noticeable in the displayed

Live View image under low light. However, when you shoot, the image

recorded will have less noise. (The image quality of the Live View image

is different from that of the recorded image.)

If the light source (illumination) within the image changes, the screen

may flicker. If this happens, exit Live View shooting and resume Live

View shooting under the actual light source.

If you point the camera in a different direction, it may throw off the Live

View image’s correct brightness momentarily. Wait until the brightness

level stabilizes before shooting.

If there is a very bright light source in the image, the bright area may

appear black on the LCD monitor. However, the actual captured image

will correctly show the bright area.

In low light, if you set the [52: LCD brightness] to a bright setting, noise

or irregular colors may appear in the Live View image. However, the

noise or irregular colors will not be recorded in the captured image.

When you magnify the image, the image sharpness may look more

pronounced than in the actual image.

Custom Functions

During Live View shooting, some Custom Function settings will not take

effect (p.259).

Lens and Flash

During Live View shooting, focus preset for (super) telephoto lenses

cannot be used.

FE lock will not work when the built-in flash or an external Speedlite is

used. Modeling flash also will not work if an external Speedlite is used.

159

Shooting Movies

Movie shooting is enabled by

setting the Mode Dial to <k>.

The movie recording format will

be MOV.

For cards that can record movies, see page 5.

Full HD 1080

Full HD 1080 indicates compatibility with High-

Definition featuring 1080 vertical pixels (scanning

lines).

160

Connecting the camera to a TV set is recommended to play back the

movies shot (p.226).

1Set the Mode Dial to <k>.

The reflex mirror will make a sound,

then the image will appear on the

LCD monitor.

2Focus on the subject.

Before shooting a movie, focus with

AF or manual focus (p.148-156).

When you press the shutter button

halfway, the camera will focus with

the current AF method.

3Shoot the movie.

Press the <A> button to start

shooting a movie. To stop movie

shooting, press the <A> button

again.

While the movie is being shot, the [o]

mark will be displayed on the upper

right of the screen.

Sound will be recorded by the built-in

microphone.

k Shooting Movies

Autoexposure Shooting

Recording movie

Built-in microphone

161

k Shooting Movies

General Movie Shooting Cautions are on pages 181-182.

If necessary, also read General Live View Shooting Cautions on

pages 157-158.

The ISO speed (ISO 100 - ISO 6400), shutter speed, and aperture are

set automatically.

You can press the <A> button (p.120) to lock the exposure (AE lock).

The exposure setting will be displayed for the number of seconds set

with [k2: Metering timer]. After applying AE lock during movie

shooting, you can cancel it by pressing the <S> button. (AE lock setting

is retained until you press the <S> button.)

By holding down the <O> button and turning the <6> dial, you can

set the exposure compensation.

If you shoot a movie with autoexposure, the ISO speed, shutter speed,

and aperture will not be recorded in the movie’s Exif information.

With autoexposure movie shooting, the camera will automatically turn on

the Speedlite’s LED light under low-light conditions. For details, refer to

the Instruction Manual of the EX-series Speedlite equipped with an LED

light.

k Shooting Movies

162

You can manually set the shutter speed, aperture, and ISO speed for

movie shooting. Using manual exposure to shoot movies is for

advanced users.

1Set the Mode Dial to <k>.

The reflex mirror will make a sound,

then the image will appear on the

LCD monitor.

2Select [Movie exposure].

Press the <M> button and under

the [k1] tab, select [Movie

exposure], then press <0>.

3Select [Manual].

Select [Manual], then press <0>.

Press the <M> button to exit the

menu, and return to the movie

shooting screen.

4Set the shutter speed and

aperture.

To set the shutter speed, turn the

<6> dial. The settable shutter

speeds vary depending on the frame

rate <9>.

•6 5 4: 1/4000 sec. - 1/30 sec.

•8 7: 1/4000 sec. - 1/60 sec.

To set the aperture, hold down the

<O> button and turn the <6>

dial.

5 Set the ISO speed.

Press the <D> button and press the

dial to select the ISO speed.

For details on the ISO speed, see the

next page.

Manual Exposure Shooting

<6>

163

k Shooting Movies

6Focus and shoot the movie.

The procedure is the same as steps 2

and 3 for “Autoexposure Shooting”

(p.160).

ISO Speed During Manual Exposure Shooting

With [Auto], the ISO speed will be set automatically within ISO 100 -

ISO 6400.

You can set the ISO speed manually within ISO 100 - ISO 6400 in

whole-stop increments.

If [k1: k Highlight tone priority] is set to [Enable], the ISO

speed will be ISO 200 - ISO 6400.

AE lock and exposure compensation cannot be set.

Changing the shutter speed or aperture during movie shooting is not

recommended since the changes in the exposure will be recorded.

If you change the shutter speed while shooting a movie under

fluorescent or LED lighting, image flicker may be recorded.

With ISO Auto, the movie shooting can record a suitable exposure even

when the ambient brightness changes.

By pressing the button, you can display the histogram.

When shooting a movie of a moving subject, a shutter speed of 1/30 sec.

to 1/125 sec. is recommended. The faster the shutter speed, the less

smooth the subject’s movement will look.

k Shooting Movies

164

Each time you press the button, the information display will

change.

Information Display

Movie shooting remaining time / Elapsed time

Recording movie

Magnifying

frame

AF point (Quick mode)

ISO speed

Exposure level indicator

Aperture

AE lock

White balance

Movie recording

size

Auto Lighting

Optimizer

Shutter speed

Picture Style

AF method

•d: FlexiZone - Single

•c: u Live mode

•f: Quick mode

Battery level

Frame rate

Movie shooting mode

Eye-Fi card transmission status

LED light

Highlight tone priority

GPS connection indicator

Exposure mode

L: Autoexposure

K: Manual

exposure

Recording level:

Manual

Video snapshot

Video snapshot shooting time

Temperature

warning

If there is no card in the camera, the movie shooting remaining time will

be displayed in red.

When movie shooting starts, the movie shooting remaining time will

change to the elapsed time.

165

k Shooting Movies

Notes for Movie Shooting

Do not allow the product to maintain contact with the same area of

skin for extended periods of time during use.

This may result in low-temperature contact burns, including skin redness

and blistering, even if the product does not feel hot. The use of a tripod or

similar equipment is recommended when using the product in hot places

and for people with circulation problems or less sensitive skin.

Do not point the camera toward an intense light source, such as the sun

or an intense artificial light source. Doing so may damage the image

sensor or the camera’s internal components.

When [k1: AF w/ shutter button during k] is set to [Enable]

(p.176), pressing the shutter button halfway during movie shooting will

perform autofocusing. However, the following may occur.

• Focus may become far off momentarily.

• The brightness of the recorded movie may change.

• The recorded movie may be momentarily still.

• The movie may record the lens operation sound.

If <Q> or <Qw> is set and the ISO speed or aperture changes during

movie shooting, the white balance may also change.

If you shoot a movie under fluorescent or LED lighting, the movie may

flicker.

Shooting a few test movies is recommended where you will perform

zooming during movie shooting. Zooming during movie shooting may

result in recording of changes in exposure or mechanical sound of the

lens, or images may be out of focus.

During movie shooting, you cannot magnify the image even if you press

the button.

If you connect or disconnect the HDMI cable during movie shooting, the

movie shooting will end.

Be careful not to cover the built-in microphone (p.160) with your finger,

etc.

General Movie Shooting Cautions are on pages 181-182.

If necessary, also read General Live View Shooting Cautions on

pages 157-158.

k Shooting Movies

166

Final image simulation is a function that shows the movie as it will look

with the current settings for Picture Style, white balance and other

shooting functions applied.

During movie shooting, the image displayed will automatically show the

effects of the settings listed below.

Final Image Simulation for Movie Shooting

Picture Style

* All settings such as sharpness, contrast, color saturation, and color tone will

be reflected.

White balance

Exposure

Depth of field

Auto Lighting Optimizer

Peripheral illumination correction

Highlight tone priority

Still photo shooting is not possible in movie shooting mode. To

shoot still photos, turn the Mode Dial to change the shooting mode.

Final Image Simulation

Still Photo Shooting

Movie-related settings are under the [k1], [k2], and [k3] tabs

(p.176).

A movie file is recorded each time you shoot a movie (p.169).

The movie image’s field of view is approx. 100% (with movie recording

size set to [A]).

Monaural sound is recorded by the camera’s built-in microphone (p.160).

With a fully-charged Battery Pack LP-E10, the total movie shooting time

will be as follows: approx. 1 hr. 30 min. at room temperature (23°C/73°F),

and approx. 1 hr. 25 min. at low temperatures (0°C/32°F).

During movie shooting, focus preset for (super) telephoto lenses cannot

be used.

167

Function settings particular to movie shooting are explained here.

If you press the <Q> button while the image is displayed on the LCD

monitor, you can set any of the following: AF method, White balance,

Picture Style, Auto Lighting Optimizer, Movie-recording size, and Video

snapshot.

1Press the <Q> button (7).

The settable functions will be

displayed.

If the AF method is <f>, the AF

point will also be displayed. You can

also select the AF point (p.154).

2Select a function and set it.

Press the <W> <X> keys to select a

function.

The settings of the selected function

and Feature guide (p.55) will appear.

Press the <Y> <Z> keys or turn the

<6> dial to set the function.

Pressing <0> will display the

respective function setting screen.

To set Auto white balance, select

[Q], press <0>, then press the

button.

3Exit the setting.

Press the <Q> button to return to

movie shooting.

Shooting Function Settings

Q Quick Control

For manual exposures, ISO speed can also be set.

168

The menu option [k2: Movie rec. size]

enables you to select the movie’s image

size [****x****] and frame rate [9]

(frames recorded per second). The 9

(frame rate) switches automatically

depending on the [k2: Video system]

setting.

Image Size

[1920x1080] (A) : Full High-Definition (Full HD) recording quality.

The aspect ratio is 16:9.

[1280x720] (B) : High-Definition (HD) recording quality. The

aspect ratio is 16:9.

[640x480] (C) : Standard-definition recording quality. The

aspect ratio is 4:3.

Frame Rate (fps: frame per second)

6/8: For areas where the TV system is NTSC (North America,

Japan, South Korea, Mexico, etc.).

5/7: For areas where the TV system is PAL (Europe, Russia,

China, Australia, India, etc.).

4: Mainly for motion pictures.

3 Setting the Movie Recording Size

169

3 Setting the Movie Recording Size

Total Movie Recording Time and File Size Per Minute (Approx.)

Movie Files Exceeding 4 GB

Due to the file system, movie shooting will stop automatically if the

file size of a single movie clip reaches 4 GB. You can start shooting a

movie again by pressing the <A> button. (The movie will be

recorded as a new movie file.)

Movie Shooting Time Limit

The maximum recording time of one movie clip is 29 min. 59 sec. If

the movie shooting time reaches 29 min. 59 sec., the movie shooting

will stop automatically. You can start shooting a movie again by

pressing the <A> button. (The movie will be recorded as a new

movie file.)

Movie recording

Size

Total Recording Time on Card File Size

4 GB 16 GB 64 GB

[1920x1080]

11 min. 44 min. 2 hr. 59 min. 340 MB/min.5

[1280x720]811 min. 44 min. 2 hr. 59 min. 340 MB/min.

[640x480]642 min. 2 hr. 50 min. 11 hr. 20 min. 90 MB/min.

An increase of the camera’s internal temperature may cause movie shooting

to stop before the maximum recording time shown in the table above

(p.181).

170

You can shoot a series of short movie clips lasting approx. 2 sec., 4

sec., or 8 sec. called video snapshots. The video snapshots can be

joined together into a single movie called a video snapshot album. You

can thereby show quick highlights of a trip or event.

A video snapshot album can also be played back together with

background music (p.174, 219).

1Select [Video snapshot].

Under the [k2] tab, select [Video

snapshot], then press <0>.

2Select the [Video snapshot]

shooting time.

Select the shooting time for one video

snapshot, then press <0>.

Press the <M> button to exit the

menu, and return to the movie

shooting screen.

3 Shooting Video Snapshots

Setting the Video Snapshot Shooting Duration

Video Snapshot Album Concept

Video snapshot album

Video

snapshot 1

Video

snapshot 2

Video

snapshot **

171

3 Shooting Video Snapshots

3Shoot the first video snapshot.

Press the <A> button, then shoot.

The blue bar indicating the shooting

duration will gradually decrease. After

the set shooting duration elapses, the

shooting stops automatically.

The confirmation screen will appear

(p.172).

4Save as a video snapshot album.

Select [J Save as album], then

press <0>.

The movie clip will be saved as the

video snapshot album’s first video

snapshot.

5Continue to shoot more video

snapshots.

Repeat step 3 to shoot the next video

snapshot.

Select [J Add to album], then press

<0>.

To create another video snapshot

album, select [W Save as a new

album].

Repeat step 5 as necessary.

6Exit the video snapshot shooting.

Set [Video snapshot] to [Disable].

To return to normal movie

shooting, be sure to set [Disable].

Press the <M> button to exit the

menu, and return to the normal movie

shooting.

Creating a Video Snapshot Album

Shooting duration

3 Shooting Video Snapshots

172

Options in Steps 4 and 5

[Playback video snapshot] Operations

*With [Skip backward] and [Skip forward], the skipping length corresponds to the

number of seconds set under [Video snapshot] (approx. 2 sec., 4 sec., or 8 sec.).

Function Description

J Save as album

(Step 4)

The movie clip will be saved as the video snapshot

album’s first video snapshot.

J Add to album

(Step 5)

The video snapshot just recorded will be added to

the album recorded immediately before.

Save as a new album

(Step 5)

A new video snapshot album is created and the

movie clip is saved as the first video snapshot. Select

[

] on the confirmation dialog. The new album will

be a different file from the previously recorded album.

Playback video snapshot

(Step 4 and 5)

The video snapshot just recorded will be played

back. For playback operations, see the table below.

r Do not save to album

(Step 4)

Delete without saving

to album

(Step 5)

The video snapshot just recorded will be erased

instead of being saved to the album. Select [OK] on

the confirmation dialog.

Function Playback Description

2 Exit The previous screen will reappear.

7 Play By pressing <0>, you can play back or pause the video

snapshot recorded immediately before.

5 First frame Displays the first scene of the album’s first video snapshot.

P Skip backward* Each time you press <0>, the video snapshot skips back

by a few seconds.

3 Previous frame Each time you press <0>, the previous frame is

displayed. If you hold down <0>, it will rewind the movie.

6 Next frame

Each time you press <

>, the movie will play frame-by-

frame. If you hold down <

>, it will fast forward the movie.

O Skip forward* Each time you press <0>, the video snapshot skips

forward by a few seconds.

4 Last frame Displays the last scene of the album’s last video snapshot.

Playback position

mm' ss" Playback time (minutes:seconds)

9 Volume Turn the <6> dial to adjust the volume of the built-in

speaker (p.218).

173

3 Shooting Video Snapshots

Cautions for Shooting Video Snapshots

You can add to an album only video snapshots with the same duration

(approx. 2 sec., 4 sec., or 8 sec. each).

Note that if you do any of the following while shooting video snapshots, a

new album will be created for subsequent video snapshots.

• Changing the [Movie rec. size] (p.168).

• Changing the [Video snapshot]’s shooting time (p.170).

• Changing the [Sound rec.] setting from [Auto]/[Manual] to [Disable]

or from [Disable] to [Auto]/[Manual] (p.178).

• Opening the card slot/battery compartment cover.

• Updating the firmware.

The sequence of snapshots in an album cannot be changed.

Video snapshots taken afterward cannot be added to an existing album.

The shooting duration of a video snapshot is only approximate.

Depending on the frame rate, the shooting duration displayed during

playback may not be exact.

3 Shooting Video Snapshots

174

You can play back a video snapshot album in the same way as a normal

movie (p.218).

1Play back the movie.

Press the <x> button to display an

image.

2Select the album.

In the single-image display, the

[ts] icon displayed on the upper

left of the screen indicates a video

snapshot album.

Press the <Y> <Z> keys to select a

video snapshot album, then press

<0>.

3Play back the album.

On the movie playback panel

displayed, select [7] (Play), then

press <0>.

Playing back an Album

175

3 Shooting Video Snapshots

Background Music

You can play background music when you play back albums, normal

movies, and slide shows on the camera (p.174, 219). To play

background music, you must first copy the background music to the card

using EOS Utility (EOS software). For information on how to copy the

background music, refer to the EOS Utility Instruction Manual.

Music recorded on the memory card must be used only for private

enjoyment. Do not violate the rights of the copyright holder.

176

Menu options under the [k1], [k2], and [k3] tabs are explained

below.

[k1]

Movie exposure

Normally, set this to [Auto].

Setting it to [Manual] will enable you to manually set the ISO speed,

shutter speed, and aperture for movie shooting (p.162).

AF method

The AF methods are the same as described on pages 148-155. You

can select [FlexiZone - Single], [u Live mode], or [Quick mode].

Note that continuous focusing on a moving subject is not possible.

AF with shutter button during k

When [Enable] is set, AF is possible during movie shooting.

However, continuous autofocusing is not possible. If you autofocus

during movie shooting, the focus may be momentarily thrown off or

the exposure may be changed. The movie will also record the lens

operation sound.

During movie shooting, if the AF method is set to [Quick mode], AF

will be executed in [FlexiZone - Single].

3 Menu Function Settings

The settings under the [k1], [k2], and [k3] menu tabs will take

effect only in the <k> mode.

The [AF method] setting will also be applied to Live View shooting.

177

3 Menu Function Settings

kShutter/AE lock button

You can change the function assigned to the shutter button’s halfway

position and to the AE lock button.

• AF/AE lock:

Normal function. Press the shutter button halfway to execute AF.

Press the <A> button for AE lock.

• AE lock/AF:

Press the shutter button halfway for AE lock. For AF, press the

<A> button. This is convenient when you want to focus and meter

separately.

• AF/AF lock, no AE lock:

Press the shutter button halfway to execute AF. While you

autofocus by pressing the shutter button halfway, you can pause

the autofocus by holding down the <A> button. You can resume

the autofocus by letting go of the <A> button. AE lock is not

possible.

• AE/AF, no AE lock:

Press the shutter button halfway for metering. For AF, press the

<A> button. AE lock is not possible.

kHighlight tone priority

If [Enable] is set, highlight detail will be improved. The dynamic

range is expanded from the standard 18% gray to bright highlights.

The gradation between the grays and highlights becomes smoother.

The settable ISO speed range will be ISO 200 - ISO 6400. The Auto

Lighting Optimizer will also be set automatically to [Disable] and

cannot be changed.

3 Menu Function Settings

178

[k2]

Movie recording size

You can set the movie recording size (image size and frame rate).

For details, see page 168.

Sound recording

Sound will be recorded by the built-in

monaural microphone. An external

microphone cannot be used.

[Sound rec.] and [Rec. level] options

[Auto] : The sound-recording level is adjusted automatically.

Auto level control will operate automatically in

response to the sound level.

[Manual] : For advanced users. You can adjust the sound-

recording level to one of 64 levels.

Select [Rec. level] and look at the level meter while

pressing the <Y> <Z> keys to adjust the sound-

recording level. Look at the peak hold indicator, and

adjust so that the level meter sometimes lights up on

the right of the “12” (-12 dB) mark for the loudest

sounds. If it exceeds “0”, the sound will be distorted.

[Disable] : Sound will not be recorded.

Level meter

179

3 Menu Function Settings

[Wind filter]

When set to [Enable], it reduces wind noise when there is wind

outdoors.

Note that [Enable] will also reduce low bass sounds, so set this

function to [Disable] when there is no wind. It will record a more

natural sound than with [Enable].

Metering timer

You can change how long the exposure setting is displayed (AE lock

time).

Grid display

With [Grid 1l] or [Grid 2m], you can display grid lines. You can

check horizontal or vertical tilt when shooting.

Video snapshot

You can shoot video snapshots. For details, see page 170.

Video system

Select [NTSC] or [PAL] to suit your TV set’s video system (p.168).

Sound is recorded at a sampling rate of 48 kHz/16-bit.

The Metering timer and Grid display settings will also be reflected in Live

View shooting. (The Metering timer setting will take effect only in Creative

Zone modes.)

3 Menu Function Settings

180

[k3]

Exposure compensation

The exposure compensation amount can be set up to ±3 stops.

Auto Lighting Optimizer

The Auto Lighting Optimizer can be set as explained on page 123.

If the [k1] menu tab’s [kHighlight tone priority] is set to

[Enable], the Auto Lighting Optimizer will be set automatically to

[Disable] and cannot be changed.

Custom White Balance

As explained on page 133, the image for custom white balance can

be selected.

Picture Style

The Picture Style can be set as explained on page 95.

181

General Movie Shooting Cautions

Red <E> Internal Temperature Warning Icon

If the camera’s internal temperature increases due to prolonged movie

shooting or under a high ambient temperature, a red <E> icon will

appear.

The red <E> icon indicates that movie shooting will soon be terminated

automatically. If this happens, you will not be able to shoot again until the

camera’s internal temperature decreases. Turn off the power and let the

camera rest for a while.

Shooting a movie at a high temperature for a prolonged period will cause

the <E> icon to appear earlier. When you are not shooting, always turn

off the camera.

Recording and Image Quality

If the attached lens has an Image Stabilizer and you set the Image

Stabilizer (IS) switch to <1>, the Image Stabilizer will operate at all

times even if you do not press the shutter button halfway. The Image

Stabilizer consumes battery power and may shorten the total movie

shooting time. If you use a tripod or if the Image Stabilizer is not

necessary, it is recommended to set the IS switch to <2>.

The camera’s built-in microphone will also record the operation sound

and mechanical sound of the camera during shooting.

If the brightness changes during autoexposure movie shooting, the

movie may freeze temporarily. In such cases, shoot movies with manual

exposure.

If there is a very bright light source in the image, the bright area may

appear black on the LCD monitor. The movie will be recorded almost

exactly as it appears on the LCD monitor.

In low light, noise or irregular colors may appear in the image. The movie

will be recorded almost exactly as it appears on the LCD monitor.

182

General Movie Shooting Cautions

Recording and Image Quality

If you use a card with a slow writing speed, a five-level

indicator may appear on the right of the screen during movie

shooting. It indicates how much data has not yet been

written to the card (remaining capacity of the internal buffer

memory). The slower the card, the faster the indicator will

climb upward. If the indicator becomes full, movie shooting

will stop automatically.

If the card has a fast writing speed, the indicator will either

not appear or the level (if displayed) will hardly go upward.

First, shoot a few test movies to see if the card can write fast enough.

Playback and TV Connection

If you connect the camera to a TV set with an HDMI cable (p.226) and

shoot a movie at [1920x1080] or [1280x720], the movie being shot will

be displayed in a small size on the TV set. The movie will still be

recorded in the movie-recording size that was set.

If you connect the camera to a TV set (p.226) and shoot a movie, the TV

set will not output any sound during the shooting. However, the sound

will be properly recorded.

Indicator

183

Handy Features

Disabling the Beeper (p.184)

Card Reminder (p.184)

Setting the Image Review Time (p.184)

Setting the Auto Power-off Time (p.185)

Adjusting the LCD Monitor Brightness (p.185)

Creating and Selecting a Folder (p.186)

File Numbering Methods (p.188)

Setting Copyright Information (p.190)

Auto Rotation of Vertical Images (p.192)

Checking Camera Settings (p.193)

Reverting the Camera to the Default Settings (p.194)

Turning the LCD Monitor Off/On (p.197)

Changing the Shooting Settings Screen Color (p.197)

Setting the Flash (p.198)

Appending Dust Delete Data (p.202)

Manual Sensor Cleaning (p.204)

184

You can prevent the beeper from sounding when focus is achieved or

during self-timer operation.

Under the [z1] tab, select [Beep], then

press <0>. Select [Disable], then press

<0>.

This setting prevents shooting if there is no card in the camera.

Under the [z1] tab, select [Release

shutter without card], then press <0>.

Select [Disable], then press <0>.

If there is no card inserted in the camera

and you press the shutter button, “Card”

will be displayed in the viewfinder, and

you cannot release the shutter.

You can set how long the image is displayed on the LCD monitor

immediately after shooting. If [Off] is set, the image will not be displayed

immediately after shooting. If [Hold] is set, the image review will be

displayed up until the [51: Auto power off] time has elapsed.

During image review, if you operate any camera controls such as

pressing the shutter button halfway, the image review will end.

Under the [z1] tab, select [Image

review], then press <0>. Select the

desired setting, then press <0>.

Handy Features

3 Disabling the Beeper

3 Card Reminder

3 Setting the Image Review Time

185

Handy Features

To save battery power, the camera turns off automatically after the set

time of idle operation elapses. You can set this auto power-off time.

When the camera is turned off due to auto power off, you can turn it on

again by pressing the shutter button, etc.

If [Disable] is set, either turn off the camera or press the

button to turn off the LCD monitor to save battery power.

Even when [Disable] is set, if the camera is not used for 30 min.,

the LCD monitor will turn off automatically. To turn on the LCD

monitor again, press the button.

Under the [51] tab, select [Auto power

off], then press <0>. Select the desired

setting, then press <0>.

You can adjust the brightness of the LCD monitor to make it easier to view.

Under the [52] tab, select [LCD

brightness], then press <0>. Press the

<Y> <Z> keys to adjust the brightness

on the adjustment screen, then press

<0>.

When checking the exposure of an

image, set the LCD monitor brightness to

4 and prevent the ambient light from

affecting the image.

3 Setting the Auto Power-off Time

3 Adjusting the LCD Monitor Brightness

Handy Features

186

You can freely create and select the folder where the captured images

are to be saved.

This operation is optional since a folder will be created automatically for

saving captured images.

Creating a Folder

1Select [Select folder].

Under the [51] tab, select [Select

folder], then press <0>.

2Select [Create folder].

Select [Create folder], then press

<0>.

3Create a new folder.

Select [OK], then press <0>.

A new folder with the folder number

increased by one is created.

3 Creating and Selecting a Folder

187

Handy Features

Selecting a Folder

With the folder selection screen

displayed, select a folder and press

<0>.

The folder where the captured

images will be saved is selected.

Subsequent captured images will be

recorded into the selected folder.

Number of images in folder

Folder name

Lowest file number

Highest file number

Folders

As with “100CANON” for example, the folder name starts with three digits

(the folder number) followed by five alphanumeric characters. A folder can

contain up to 9999 images (file number 0001 - 9999). When a folder

becomes full, a new folder with the folder number increased by one is

created automatically. Also, if manual reset (p.189) is executed, a new

folder will be created automatically. Folders numbered from 100 to 999 can

be created.

Creating Folders with a Computer

With the card open on the screen, create a new folder named “DCIM”. Open

the DCIM folder and create as many folders as necessary to save and

organize your images. The folder name must follow the format

“100ABC_D”. The first three digits are the folder number, from 100 to 999.

The last five characters can be any combination of upper- and lower-case

letters from A to Z, numerals, and the underscore “_”. The space cannot be

used. Also note that two folder names cannot share the same three-digit

folder number (for example, “100ABC_D” and “100W_XYZ”), even if the last

five characters in each name are different.

Handy Features

188

The image files will be numbered from 0001 to 9999 in the order the

images are taken, then saved in a folder. You can change how the file

number is assigned.

The file number will appear on your computer in this format:

IMG_0001.JPG.

Under the [51] tab, select [File

numbering], then press <0>. The

available settings are described below.

Select the option, then press <0>.

[Continuous]: The file numbering continues in sequence even

after you replace the card or create a folder.

Even after you replace the card or create a new folder, the file

numbering continues in sequence up to 9999. This is useful when

you want to save images numbered anywhere between 0001 to

9999 on multiple cards or in multiple folders into one folder on a

computer.

If the replacement card or existing folder already contains images

recorded previously, the file numbering of the new images may

continue from the file numbering of the existing images on the card

or in the folder. If you want to use continuous file numbering, it is

recommended that you use a newly-formatted card each time.

3 File Numbering Methods

File numbering after

replacing the card

Next sequential file number

File numbering after

creating a folder

Card-1 Card-2

0051 0052

Card-1

100 101

0051 0052

189

Handy Features

[Auto reset]: The file numbering restarts from 0001 each time

the card is replaced or a new folder is created.

When you replace the card or create a folder, the file numbering

restarts from 0001 for the new images saved. This is useful if you

want to organize images by cards or folders.

If the replacement card or existing folder already contains images

recorded previously, the file numbering of the new images may

continue from the file numbering of the existing images on the card

or in the folder. If you want to save images with the file numbering

starting from 0001, use a newly formatted card each time.

[Manual reset]: To reset the file numbering to 0001 manually or

to start from file number 0001 in a new folder.

When you reset the file numbering manually, a new folder is created

automatically and the file numbering of images saved to that folder

starts from 0001.

This is useful, for example, when you want to use different folders for

the images taken yesterday and the ones taken today. After the

manual reset, the file numbering returns to continuous or auto reset.

(There will be no manual reset confirmation dialog.)

File numbering after

replacing the card

File numbering is reset

File numbering after

creating a folder

Card-1 Card-2

0051 0001

Card-1

100 101

0051 0001

If the file number in folder 999 reaches 9999, shooting will not be possible

even if the card still has storage capacity. The LCD monitor will display a

message telling you to replace the card. Replace it with a new card.

For both JPEG and RAW images, the file name will start with “IMG_”. Movie

file names will start with “MVI_”. The extension will be “.JPG” for JPEG

images, “.CR2” for RAW images, and “.MOV” for movies.

Handy Features

190

When you set the copyright information, it will be appended to the

image as Exif information.

1Select [Copyright information].

Under the [53] tab, select [Copyright

information], then press <0>.

2Select the option to be set.

Select [Enter author’s name] or

[Enter copyright details], then press

<0>.

The text entry screen will appear.

Select [Display copyright info.] to

check the copyright information

currently set.

Select [Delete copyright

information] to delete the copyright

information currently set.

3Enter text.

See “Text Entry Procedure” on the

next page and enter the copyright

information.

Enter up to 63 alphanumeric

characters and symbols.

4Exit the setting.

After entering the text, press the

<M> button to exit.

3 Setting Copyright InformationN

191

Handy Features

Text Entry Procedure

Changing the entry area

Press the <Q> button to toggle

between the top and bottom entry

areas.

Moving the cursor

Press the <Y> <Z> keys to move

the cursor.

Entering text

In the bottom area, press the <S> cross keys or turn the <6> dial

to select a character, then press <0> to enter it.

Deleting a character

Press the <L> button to delete one character.

Finishing the text entry

After entering the text, press the <M> button to finalize the text

entry and return to the screen in step 2.

Canceling the text entry

To cancel the text entry, press the button to cancel it and

return to the screen in step 2.

You can also set or check the copyright information with EOS Utility (EOS

software, p.314).

Handy Features

192

Vertical images are rotated automatically so they

are displayed vertically on the camera’s LCD

monitor and on the computer instead of

horizontally. You can change the setting for this

feature.

Under the [51] tab, select [Auto rotate],

then press <0>. The available settings

are described below. Select the desired

setting, then press <0>.

[OnzD]:

The vertical image is automatically rotated during playback

on both the camera’s LCD monitor and on the computer.

[OnD]:The vertical image is automatically rotated only on the

computer.

[Off] : The vertical image is not automatically rotated.

The vertical image is not rotated during the image review

immediately after shooting.

Press the <x> button and the image playback will display the

rotated image.



[

OnzD

] is set, but the image does not rotate during playback.

Auto rotate will not work with vertical images captured while [

Auto

rotate

] was set to [

Off

]. If the vertical image is taken while the camera

is pointed up or down, the image may not be rotated automatically for

playback. In such a case, see “Rotating the Image” on page 211.

On the camera’s LCD monitor, I want to rotate an image

captured when [OnD] had been set.

Set [OnzD], then play back the image. It will be rotated.

The vertical image does not rotate on the computer screen.

The software used is not compatible with image rotation. Use EOS

software instead.

3 Auto Rotation of Vertical Images

FAQ

193

Handy Features

While the menu is displayed, press the button to display the

camera’s major function settings.

While the menu is displayed, press

the button to display the

settings.

Press the button again to

return to the menu.

B Checking Camera Settings

Date/Time (p.41)

WB correction (p.135)/

WB bracketing (p.136)

Color space (p.137)

Auto rotate display (p.192)

Auto power off (p.185)

Remaining card capacity

Settings display

Red-eye reduction (p.106)

Beeper (p.184)

Live View shooting (p.139)

Daylight saving time (p.42)

Handy Features

194

The camera’s shooting function settings and menu settings can be

reverted to their defaults. This option is available in Creative Zone

modes.

1Select [Clear settings].

Under the [53] tab, select [Clear

settings], then press <0>.

2Select [Clear all camera settings].

Select [Clear all camera settings],

then press <0>.

3Select [OK].

Select [OK], then press <0>.

Setting [Clear all camera settings]

will reset the camera to the default

settings as shown on the next pages.

Clearing all camera settings

After the procedure above, select [Clear all Custom Func. (C.Fn)]

in [53: Clear settings] to clear all the Custom Function settings

(p.258).

3 Reverting the Camera to the Default SettingsN

FAQ

195

Handy Features

Shooting Function Settings Image Recording Settings

AF operation One-Shot AF Image quality 73

AF point selection Automatic

selection

Picture Style Auto

Auto Lighting

Optimizer Standard

Drive/self-timer u (Single

shooting) Peripheral

illumination

correction

Enable /

Correction

data retained

Metering mode q (Evaluative

metering)

ISO speed AUTO (Auto) Color space sRGB

ISO Auto Maximum 3200 White balance Q (Ambience

priority)

Exposure

compensation/AEB Canceled

Custom White

Balance Canceled

Flash exposure

compensation 0 (Zero)

White balance

correction Canceled

Custom Functions Unchanged

White balance

bracketing Canceled

File numbering Continuous

Dust Delete Data Erased

Handy Features

196

Camera Settings Live View Shooting Settings

Auto power off 30 sec. Live View shooting Enable

Beep Enable AF method

FlexiZone - Single

Release shutter

without card Enable Grid display Hide

Aspect ratio 3:2

Image review 2 sec. Metering timer 8 sec.

Histogram display Brightness

Image jump w/ 6e (10 images) Movie Shooting Settings

Auto rotate OnzD

Movie shooting mode

Auto

LCD brightness AF method

FlexiZone - Single

LCD off/on button Shutter button AF with shutter

button during

movie recording

DisableDate/Time/Zone Unchanged

Language Unchanged

Screen color 1kShutter/AE lock

button AF/AE lock

Feature guide Enable

information Unchanged kHighlight tone

priority Disable

Eye-Fi transmission Disable

Movie recording size

1920x1080

Wi-Fi/NFC Disable Sound recording Auto

Wi-Fi function Unchanged Metering timer 8 sec.

My Menu settings Unchanged Grid display Hide

Display from My

Menu Disable Video snapshot Disable

Video system Unchanged

Exposure

compensation Canceled

Auto Lighting

Optimizer Standard

Custom White Balance

Canceled

Picture Style Auto

For Wi-Fi/NFC settings, refer to the Wireless Function Instruction Manual.

197

Handy Features

You can set the camera so that the shooting function settings display

(p.54) does not turn off and on as you press the shutter button halfway

(or press the <A> button).

Under the [52] tab, select [LCD off/on

btn], then press <0>. The available

settings are described below. Select the

option, then press <0>.

[Shutter btn.]: When you press the shutter button halfway, the

display will turn off. When you let go of the shutter

button, the display will turn on.

[Shutter/DISP]: When you press the shutter button halfway, the

display will turn off. The display will remain off even

after you let go of the shutter button. To turn on the

display, press the button.

[Remains on]: Display remains on even when you press the

shutter button halfway. To turn off the display, press

the button.

You can change the background color of the shooting settings screen.

Under the [51] tab, select [Screen

color], then press <0>. Select the

desired color, then press <0>.

When you exit the menu, the shooting

settings screen based on the selected

color will be displayed.

3 Turning the LCD Monitor Off/On

3 Changing the Shooting Settings Screen Color

198

The built-in flash and external Speedlite settings can be set with the

camera’s menu. You can use the camera’s menu to set the external

Speedlite function settings only if an EX-series Speedlite compatible

with this function is attached.

The setting procedure is the same as when setting a camera menu

function.

Select [Flash control].

Under the [z1] tab, select [Flash

control], then press <0>.

The flash control screen will appear.

Normally, set this to [Enable].

If [Disable] is set, neither the built-

in flash nor the external Speedlite

will fire. This is useful when you want

to use only the flash’s AF-assist

beam.

3 Setting the FlashN

[Flash firing]

Even if [Flash firing] is set to [Disable], if focus is difficult to achieve in low

light, the built-in flash may still fire a series of flashes (AF-assist beam,

p.100).

199

3 Setting the FlashN

With [

Built-in flash func. setting

] and [

External flash func. setting

you can set the functions in the table below. The functions displayed under

[

External

flash func. setting

] vary depending on the Speedlite model.

Select [Built-in flash func. setting]

or [External flash func. setting].

The flash functions will be displayed.

The highlighted functions can be

selected and set.

[Built-in flash func. setting] and [External flash func. setting] Functions

* Regarding [FEB] (Flash exposure bracketing), [Zoom], and [Wireless func.],

refer to the Speedlite’s instruction manual compatible with the function.

[Built-in flash func. setting] and [External flash func. setting]

Function [Built-in flash func.

setting]

[External flash func.

setting]Page

Flash mode E-TTL II (Fixed) k200

Shutter synchronization k200

FEB* -k-

Flash exposure

compensation k117

E-TTL II flash metering k200

Zoom* -k-

Wireless functions* -k-

Cautions for Radio Transmission Wireless Flash Shooting

• Radio transmission wireless flash shooting cannot be set with the

camera. Use the Speedlite to set the function.

• Set flash sync speed to 1/100 or less.

• High-speed synchronization is not possible.

• Group flash is not possible.

• Remote release from a receiver unit is not possible.

• Linked shooting is not possible.

The camera may not be able to set some of the functions of [Flash

mode] and [Zoom], depending on the Speedlite model used. In such a

case, use the Speedlite to set the functions.

3 Setting the FlashN

200

Flash mode

When using an external Speedlite, you can select the flash mode to

suit your desired flash shooting.

[E-TTL II] is the standard mode of

EX-series Speedlites for automatic

flash shooting.

[Manual flash] enables you to set the

flash output yourself. This is for

advanced users.

Regarding other flash modes, refer to

the instruction manual of a Speedlite

compatible with the functions.

Shutter synchronization

Normally, set this to [1st curtain] so that the flash fires immediately

after the exposure starts.

If [2nd curtain] is set, the flash will fire right before the shutter

closes. When this is combined with a slow shutter speed, you can

create a trail of light such as from car headlights at night with a more

natural feel. With E-TTL II (auto flash exposure), the flash will be

fired twice in a row: once when you press the shutter button

completely and once right before the end of the exposure. Also, if

the shutter speed is 1/30 sec. or faster, first-curtain synchronization

will be applied automatically.

If an external Speedlite is attached, you can also select [Hi-speed]

(e). For details, refer to the Speedlite’s instruction manual.

Flash exposure compensation

See “Setting Flash Exposure Compensation” on page 117.

E-TTL II flash metering

For normal flash exposures, set it to [Evaluative]. [Average] is for

advanced users. As with an external Speedlite, the metering is

averaged for the entire area. Depending on the scene, flash

exposure compensation may be necessary.

201

3 Setting the FlashN

Clear flash settings

With the [External flash func. setting] screen, press the

button to display the screen to clear the flash settings. When you

select [OK], the settings for the built-in flash and external

Speedlite will be cleared.

The Custom Functions displayed under [External flash C.Fn setting]

vary depending on the Speedlite model.

1Display the Custom Function.

Select [External flash C.Fn setting],

then press <0>.

2Set the Custom Function.

Press the <Y> <Z> keys to select

the function number, then set the

function. The procedure is the same

as setting the camera’s Custom

Functions (p.258).

To clear all the Custom Function

settings, select [Clear ext. flash C.Fn

set.] in step 1.

Setting the External Speedlite Custom Functions

202

Dust entering the camera can adhere to the image sensor and cause

dust spots to be visible on the captured images. To erase these dust

spots, you can append the Dust Delete Data to the images. The Dust

Delete Data is used by Digital Photo Professional (EOS software,

p.314) to erase the dust spots automatically.

Prepare a solid white object such as a sheet of paper.

Set the lens focal length to 50 mm or longer.

Set the lens’s focus mode switch to <MF> and set the focus to

infinity (u). If the lens has no distance scale, rotate the camera to

face toward you and turn the focusing ring clockwise all the way.

1Select [Dust Delete Data].

Under the [z3] tab, select [Dust

Delete Data], then press <0>.

2Select [OK].

Select [OK], then press <0>.

Instructions will appear.

3 Appending Dust Delete DataN

Preparation

Obtaining the Dust Delete Data

203

3 Appending Dust Delete DataN

3Shoot a solid-white object.



At a distance of 20 cm - 30 cm (0.7 ft. -

1.0 ft.), fill the viewfinder with a

patternless, solid-white object and

take a picture.

The picture will be taken in aperture-

priority AE mode at an aperture of

f/22.

Since the image will not be saved, the

data can still be obtained even if there

is no card in the camera.



When the picture is taken, the camera

will start collecting the Dust Delete

Data. When the Dust Delete Data is

obtained, a message will appear.

Select [

] and the menu will reappear.



If the data is not obtained successfully,

an error message will appear. Follow

the “Preparation” procedure on the

preceding page, then select [

Take the picture again.

After the Dust Delete Data is obtained, it is appended to all the JPEG

and RAW images captured thereafter. Before an important shoot, it is

recommended to update the Dust Delete Data by obtaining it again.

For details about using Digital Photo Professional (EOS software,

p.314) to erase dust spots, refer to the Digital Photo Professional

Instruction Manual.

The Dust Delete Data appended to the image is so small that it hardly

affects the image file size.

Dust Delete Data

Be sure to use a solid-white object such as a new sheet of white paper. If the

object has any pattern or design, it may be recognized as dust data and

affect the accuracy of the dust deletion with Digital Photo Professional (EOS

software).

204

If dust adheres to the image sensor and dust spots appear on the

images, you can clean the image sensor yourself with a commercially-

available camera blower. Before cleaning the sensor, detach the lens

from the camera.

The image sensor is extremely delicate. If the sensor needs to be

cleaned directly, having it done by a Canon Service Center is

recommended.

1Select [Clean manually].

Under the [52] tab, select [Clean

manually], then press <0>.

2Select [OK].

Select [OK], then press <0>.

In a moment, the reflex mirror will lock

up and the shutter will open.

3Clean the sensor.

4End the cleaning.

Set the power switch to <2>.

3 Manual Sensor CleaningN

If you use a battery, make sure it is fully charged.

For the power source, using DC Coupler DR-E10 (sold separately) and

Compact Power Adapter CA-PS700 (sold separately) is recommended.

205

3 Manual Sensor CleaningN

While cleaning the sensor, never do any of the following. If the

power is cut off, the shutter will close and the shutter curtains and

image sensor may get damaged.

• Setting the power switch to <2>.

• Opening the card slot/battery compartment cover.

The surface of the image sensor is extremely delicate. Clean the sensor

with care.

Use a plain blower without any brush attached. A brush can scratch the

sensor.

Do not insert the blower tip inside the camera beyond the lens mount. If

the power is turned off, the shutter will close and the shutter curtains or

reflex mirror may get damaged.

Never use pressurized air or gas to clean the sensor. Pressurized air

may damage the sensor, and sprayed gas may freeze on the sensor and

scratch it.

If the battery level becomes low while cleaning the sensor, the beeper

will sound as a warning. Stop cleaning the sensor.

If a smudge that cannot be removed with a blower remains, having the

sensor cleaned by a Canon Service Center is recommended.

206

207

Image Playback

This chapter explains functions related to viewing

photos and movies, with more advanced uses than in

Chapter 2 “Basic Shooting and Image Playback”. Here

you will find explanations of how to play back and erase

photos and movies with the camera and view them on a

TV set.

Images shot and saved with another device

The camera may not be able to properly display images captured

with a different camera, edited with a computer, or that have had their

file names changed.

208

Search for images quickly with the index display showing four or nine

images on one screen.

1Play back the image.

When you press the <x> button, the

last image captured will be displayed.

2Switch to the index display.

Press the <Hy> button.

The 4-image index display will

appear. The selected image is

highlighted with an orange frame.

Press the <Hy> button again to

switch to the 9-image display.

Pressing the button will switch

the display between nine images, four

images and one image displayed.

3Select an image.

Press the <S> cross keys to move

the orange frame to select an image.

Turning the <6> dial will display

image(s) on the next or previous

screen.

Press <0> in the index display to

display the selected image in the

single-image display.

x Searching for Images Quickly

Displaying Multiple Images on One Screen (Index Display)



209

x Searching for Images Quickly

In the single-image display, you can turn the <6> dial to jump through

the images forward or backward according to the jump method set.

1Select [Image jump w/6].

Under the [x2] tab, select [Image

jump w/6], then press <0>.

2Select the jump method.

Press the <S> cross keys to select

the jump method, then press <0>.

d: Display images one by one

e: Jump 10 images

f: Jump 100 images

g: Display by date

h: Display by folder

i: Display movies only

j: Display stills only

k: Display by image rating (p.212)

Turn the <6> dial to select.

3Browse by jumping.

Press the <x> button to play back

images.

In the single-image display, turn the

<6> dial.

You can browse images with the

method that was set.

I Jumping through Images (Jump Display)

Playback position

Jump method

To search images by shooting date, select [Date].

To search images by folder, select [Folder].

If the card contains both movies and still photos, select [Movies] or

[Stills] to display only one or the other.

If no images match the selected [Rating], you cannot browse through the

images with the <6> dial.

210

You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor.

1Magnify the image.

Press the button during image

playback.

The image will be magnified.

If you hold down the button, the

image will be magnified until it

reaches the maximum magnification.

Press the <Hy> button to reduce

the magnification. If you hold down

the button, the magnification will be

reduced to the single-image display.

2Shift the display area.

The magnified display area will be

shifted in the direction of the <S>

cross keys pressed.

To exit magnified view, press the

<x> button and the single-image

display will reappear.

u/y Magnified View

Magnified area position

In magnified view, you can turn the <6> dial to view another image at

the same magnification.

The image cannot be magnified during the image review immediately

after shooting.

A movie cannot be magnified.

211

You can rotate the displayed image to the desired orientation.

1Select [Rotate image].

Under the [x1] tab, select [Rotate

image], then press <0>.

2Select an image.

Press the <Y> <Z> keys to select

the image to be rotated.

You can also select an image in the

index display (p.208).

3Rotate the image.

Each time you press <0>, the image

will rotate clockwise as follows:

90° 9 270° 9 0°.

To rotate another image, repeat steps

2 and 3.

To exit and return to the menu, press

the <M> button.

b Rotating the Image

If you set [51: Auto rotate] to [OnzD] (p.192) before taking vertical

shots, you need not rotate the image as described above.

If the rotated image is not displayed in the rotated orientation during

image playback, set [51: Auto rotate] to [OnzD].

A movie cannot be rotated.

212

You can rate images (still photos and movies) with one of five rating

marks: l/m/n/o/p. This function is called rating.

1Select [Rating].

Under the [x2] tab, select [Rating],

then press <0>.

2Select an image.

Press the <Y> <Z> keys to select a

still photo or movie to be rated.

By pressing the <Hy> button, you

can select images from a three-image

display. To return to the single-image

display, press the button.

3Rate the image.

Press the <W> <X> keys to select a

rating.

When you select a rating for the

image, the number beside the set

rating will increase by one.

To rate another image, repeat steps 2

and 3.

To return to the menu, press the

<M> button.

3 Setting Ratings

213

3 Setting Ratings

A total of up to 999 images of a given rating can be displayed. If there are

more than 999 images with a given rating, [###] will be displayed.

Taking Advantage of Ratings

With [x2: Image jump w/6], you can display only images having the

specified rating.

With [x2: Slide show], you can play back only images having the

specified rating.

Depending on the computer OS, you can see each file’s rating as part of

the file information display or in the provided image viewer (JPEG

images only).

214

During playback, you can press the <Q> button to set any of the

following: [J: Protect images], [b: Rotate image], [9: Rating],

[U: Creative filters], [S: Resize (JPEG images only)], and [e: Image

jump w/6].

For movies, only the functions in bold above can be set.

1Press the <Q> button.

During image playback, press the

<Q> button.

The Quick Control options will

appear.

2Select a function and set it.

Press the <W> <X> keys to select a

function.

The name and current setting of the

selected function are displayed at the

bottom of the screen.

Set it by pressing the <Y> <Z>

keys.

For Creative filters and Resize, press

<0> and set the function. For

details, see page 236 for Creative

filters and page 239 for Resize. To

cancel, press the <M> button.

3Exit the setting.

Press the <Q> button to exit the

Quick Control.

Q Quick Control for Playback

215

Q Quick Control for Playback

To rotate an image, set [51: Auto rotate] to [OnzD]. If [51: Auto rotate]

is set to [OnD] or [Off], the [b Rotate image] setting will be recorded to

the image, but the camera will not rotate the image for display.

Pressing the <Q> button during the index display will switch to the

single-image display and the Quick Control icons will appear. Pressing

the <Q> button again will return to the index display.

For images taken with another camera, the options you can select may

be restricted.

216

You can play back movies in the following three ways:

An HDMI cable (sold separately) is

necessary to connect the camera to a

TV set. Also, an HDMI terminal on a

TV set is required.

When the camera is connected to a TV

set with an HDMI cable, you can play

back movies and still photos on the TV

set.

If you have a High-Definition TV set and

connect your camera with an HDMI

cable, you can watch Full High-Definition

(Full HD: 1920x1080) and High-

Definition (HD: 1280x720) movies with

higher image quality.

k Enjoying Movies

Playback on a TV Set (p.226)

The camera does not have an audio/video OUT terminal. Therefore, the

camera cannot be connected to a TV set with an analog AV cable.

Even if the camera is connected to a hard disk recorder with a USB

cable, movies and still photos cannot be played back or saved.

If the playback device is not compatible with MOV files, the movie cannot

be played back.

217

k Enjoying Movies

You can play back movies on the

camera’s LCD monitor. You can also edit

out the movie’s first and last scenes, and

play back the still photos and movies on

the card in an automatic slide show.

To play back or edit a movie, use pre-

installed or general-purpose software,

compatible with the movie’s recording

format.

Playback on the Camera’s LCD Monitor (p.218-225)

Playback and Editing with a Computer

A movie edited with a computer cannot be rewritten to the card or played

back with the camera.

If you want to use commercially-available software to play back or edit the

movies, be sure it is compatible with MOV-format movies. For details on

commercially-available software, contact the software manufacturer.

218

1Play back the image.

Press the <x> button to display an

image.

2Select a movie.

Press the <Y> <Z> keys to select a

movie.

In the single-image display, the

<1s> icon displayed on the

upper left of the screen indicates a

movie. If the movie is a video

snapshot, [ts] will be displayed.

In the index display, perforations at

the left edge of a thumbnail indicate a

movie. As movies cannot be played

back from the index display, press

<0> to switch to the single-image

display.

3In the single-image display, press

<0>.

The movie playback panel will appear

at the bottom of the screen.

4Play back the movie.

Select [7] (Play), then press <0>.

The movie will start playing back.

You can pause the movie playback by

pressing <0>.

You can adjust the built-in speaker’s

volume by turning the <6> dial

even during movie playback.

For more details on the playback

procedure, see the next page.

k Playing Back Movies

Speaker

219

k Playing Back Movies

Movie Playback Panel

* When background music is set, the movie sound will not be played back.

Operation Playback Description

2 Exit Returns to the single-image display.

7 Play Pressing <0> toggles between playback and stop.

8 Slow motion

Adjust the slow motion speed by pressing the <Y>

<Z> keys. The slow motion speed is indicated on the

upper right of the screen.

5 First frame Displays the movie’s first frame.

3 Previous frame

Each time you press <0>, the previous frame is

displayed. If you hold down <0>, it will rewind the

movie.

6 Next frame

Each time you press <0>, the movie will play frame-

by-frame. If you hold down <0>, it will fast forward the

movie.

4 Last frame Displays the movie’s last frame.

X Edit Displays the editing screen (p.220).

Background music

*Plays back a movie with the selected background music

(p.225).

Playback position

mm' ss" Playback time (minutes:seconds)

9 Volume Turn the <6> dial to adjust the volume of the built-in

speaker (p.218).

The camera may not be able to play back movies shot with another camera.



With a fully-charged Battery Pack LP-E10, the continuous playback time

at room temperature (23°C / 73°F) will be as follows: Approx. 2 hr. 20 min.

During the single-image display, you can press the button to

change the display format (p.233).

If you connect the camera to a TV set (p.226) to play back a movie,

adjust the sound volume with the TV set. (Turning the <6> dial will not

change the sound volume.)

220

You can edit out the first and last scenes of a movie in approx. 1-sec.

increments.

1On the movie playback screen,

select [X].

The editing screen will be displayed.

2Specify the part to be edited out.

Select either [U] (Cut beginning) or

[V] (Cut end), then press <0>.

Press the <Y> <Z> keys to see the

previous or next frames. Holding

down the key will fast forward or fast

rewind the frames.

After deciding which part to edit out,

press <0>. The portion highlighted

in white on the top is what will remain.

3Check the edited movie.

Select [7] and press <0> to play

back the edited movie.

To change the editing, go back to step

To cancel the editing, select [2],

then press <0>. Select [OK] on the

confirmation dialog, then press <0>.

X Editing a Movie’s First and Last Scenes

221

X Editing a Movie’s First and Last Scenes

4Save the edited movie.

Select [W], then press <0>.

The save screen will appear.

To save it as a new movie, select

[New file]. To save it and overwrite

the original movie file, select

[Overwrite], then press <0>.

On the confirmation dialog, select

[OK], then press <0> to save the

edited movie and return to the movie

playback screen.

Since the editing is performed in approx. 1-sec. increments (position

indicated by [Z] on the top of the screen), the actual position where the

movie is edited may differ from the position you specified.

If the card does not have enough free space, [New file] will not be

available.

When the battery level is low, movie editing is not possible. Use a fully-

charged battery.

Movies shot with another camera cannot be edited with this camera.

222

You can play back the images on the card as an automatic slide show.

1Select [Slide show].

Under the [x2] tab, select [Slide

show], then press <0>.

2Select the images to be played

back.

Press the <W> <X> keys to select

the desired option, then press <0>.

All images/Movies/Stills

Press the <W> <X> keys to select

one of the following: [jAll images]

[kMovies] [zStills]. Then press

<0>.

Date/Folder/Rating

Press the <W> <X> keys to select

one of the following: [iDate]

[nFolder] [9Rating].

When <zH> is highlighted,

press the button.

Press the <W> <X> keys to select an

option, then press <0>.

3 Slide Show (Auto Playback)

Number of images to be

played back

[Date][Folder][Rating]

223

3 Slide Show (Auto Playback)

3Configure [Set up] as desired.

Press the <W> <X> keys to select

[Set up], then press <0>.

Set the [Display time], [Repeat]

(repeated playback), [Transition

effect] (effect when changing

images), and [Background music]

for the still photos.

The background music selection

procedure is explained on page 225.

After selecting the settings, press the

<M> button.

Item Playback Description

jAll images All the still photos and movies on the card will be played

back.

iDate Still photos and movies taken on the selected shooting date

will be played back.

nFolder Still photos and movies in the selected folder will be played

back.

kMovies Only the movies on the card will be played back.

zStills Only the still photos on the card will be played back.

9Rating Still photos and movies with the selected rating will be

played back.

[Display time][Repeat]

3 Slide Show (Auto Playback)

224

4Start the slide show.

Press the <W><X> keys to select

[Start], then press <0>.

After [Loading image...] is displayed,

the slide show will start.

5Exit the slide show.

To exit the slide show and return to

the setting screen, press the <M>

button.

[Transition effect][Background music]

To pause the slide show, press <0>. During pause, [G] will be displayed

on the upper left of the image. Press <0> again to resume the slide

show.

During auto playback, you can press the button to change the

still photo display format (p.83).

During movie playback, you can adjust the sound volume by turning the

<6> dial.

During auto playback or pause, you can press the <Y> <Z> keys to

view another image.

During auto playback, auto power off will not take effect.

The display time may vary depending on the image.

To view the slide show on a TV set, see page 226.

225

3 Slide Show (Auto Playback)

If you copy a background music to the card using the EOS Utility (EOS

software), you can play back the slide show while playing the

background music.

1Select [Background music].

Set [Background music] to [On],

then press <0>.

If the card has no background music,

you cannot perform step 2.

2Select the background music.

Press the <W> <X> keys to select

the desired background music, then

press <0>. You can also select

multiple background music tracks.

3Play the background music.

To listen to a sample of the

background music, press the

button.

Press the <W> <X> keys to play

another background music track. To

stop listening to the background

music, press the button

again.

Adjust the sound volume by turning

the <6> dial.

To delete a background music track,

press the <W> <X> keys and select

the track, then press the <L> button.

Selecting the Background Music

At the time of purchase, the camera does not have background music. The

procedure to copy background music to a card is explained in the EOS

Utility Instruction Manual.

226

You can play back still photos and movies on a TV set. An HDMI cable

(sold separately) is necessary to connect the camera to a TV set.

Also, an HDMI terminal on a TV set is required.

1Connect the HDMI cable to the

camera.

With the plug’s <dHDMI MINI> logo

facing the front of the camera, insert it

into the <D> terminal.

2Connect the HDMI cable to the TV

set.

Connect the HDMI cable to the TV

set’s HDMI IN port.

3Turn on the TV set and switch the

TV set’s video input to select the

connected port.

4Set the camera’s power switch to

<1>.

Viewing Images on a TV Set

If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected to a

TV set. Set [Wi-Fi/NFC] to [Disable], then reconnect the camera to the TV

set with an HDMI cable.

227

Viewing Images on a TV Set

5Press the <x> button.

The image will appear on the TV

screen. (Nothing will be displayed on

the camera’s LCD monitor.)

The images will automatically be

displayed at the optimum resolution

of the TV set.

By pressing the button, you

can change the display format.

To play back movies, see page 218.

Adjust movie sound volume with the TV set. The sound volume cannot

be adjusted with the camera.

Before connecting or disconnecting the cable between the camera and

TV set, turn off the camera and TV set.

Depending on the TV set, part of the image displayed may be cut off.

Do not connect any other device’s output to the camera’s <D>

terminal. Doing so may cause a malfunction.

Certain TV sets may not be able to play back the captured images.

228

You can set protections to prevent the precious images from being

erased accidentally.

1Select [Protect images].

Under the [x1] tab, select [Protect

images], then press <0>.

The protect setting screen will

appear.

2Select [Select images].

Select [Select images], then press

<0>.

An image will be displayed.

3Protect the image.

Press the <Y> <Z> keys to select

the image to be protected, then press

<0>.

When an image is protected, the

<K> icon will appear on the top of

the screen.

To cancel the image protection, press

<0> again. The <K> icon will

disappear.

To protect another image, repeat step

To return to the menu, press the

<M> button.

K Protecting Images

3 Protecting a Single Image

Image protect icon

229

K Protecting Images

You can protect all the images in a folder or on a card at one time.

When you select [All images in folder]

or [All images on card] in [x1: Protect

images], all the images in the folder or

on the card will be protected.

To cancel the image protection, select

[Unprotect all images in folder] or

[Unprotect all images on card].

3 Protecting All Images in a Folder or on a Card

If you format the card (p.52), the protected images will also be erased.

Movies can also be protected.

Once an image is protected, it cannot be erased by the camera’s erase

function. To erase a protected image, you must first cancel the

protection.

If you erase all the images (p.231), only the protected images will

remain. This is convenient when you want to erase unnecessary images

all at once.

230

You can either select and erase unnecessary images one by one or

erase them in one batch. Protected images (p.228) will not be erased.

1Play back the image to be erased.

2Press the <L> button.

The Erase menu will appear.

3Erase the image.

Select [Erase], then press <0>. The

image displayed will be erased.

By adding checkmarks [X] to the images to be erased, you can erase

multiple images at once.

1Select [Erase images].

Under the [x1] tab, select [Erase

images], then press <0>.

L Erasing Images

Erasing a Single Image

Once an image is erased, it cannot be recovered. Make sure you no

longer need the image before erasing it. To prevent important images

from being erased accidentally, protect them. Erasing a 1+73

image will erase both the RAW and JPEG images.

3 Checkmarking [X] Images to Be Erased in a Batch

231

L Erasing Images

2Select [Select and erase images].

Select [Select and erase images],

then press <0>.

An image will be displayed.

To display the three-image display,

press the <Hy> button. To return to

the single-image display, press the

button.

3Select the images to be erased.

Press the <Y> <Z> keys to select

the image to be erased, then press

the <W> <X> keys.

A checkmark [X] will be displayed on

the upper left of the screen.

To select another image to be erased,

repeat step 3.

4Erase the image.

Press the <L> button.

Select [OK], then press <0>.

The selected images will be erased.

You can erase all the images in a folder or on a card at one time. When

[x1: Erase images] is set to [All images in folder] or [All images on

card], all the images in the folder or on the card will be erased.

3 Erasing All Images in a Folder or on a Card

To erase all images including protected images, format the card (p.52).

232

*With 1+73 images, the 1 file size is displayed.

* If a Creative filter or Resize has been applied to the image, the <1+> icon will

change to .

* Images taken with flash without any flash exposure compensation are marked

with the <0> icon. Images taken with flash exposure compensation are marked

with the <y> icon.

B Shooting Information Display

Sample Still Photo Taken in a Creative Zone Mode

Flash exposure

compensation amount

Metering mode

Shooting mode

Highlight tone priority

Shooting date and time

White balance correction

Histogram

(Brightness/RGB)

Color space

White balance

Picture Style/Settings

File size

Image-recording

quality

Playback number/

Total images recorded

Folder number - File number

Rating

Aperture

Shutter speed

Protect imagesExposure compensation amount

ISO speed

Eye-Fi transfer

If the image was taken by another camera, certain shooting information

may not be displayed.

It may not be possible to play back images taken with this camera on

other cameras.

233

B Shooting Information Display

* With images taken in a Basic Zone mode, the information displayed will differ

depending on the shooting mode.

* If manual exposure is used, the shutter speed, aperture, and ISO speed (when

set manually) will be displayed.

*The <t> icon will be displayed for video snapshots.

Sample Still Photo Taken in a Basic Zone Mode

Sample Movie Information Display

Ambience and

ambience effects

Lighting or scene

Shooting mode

Movie shooting

mode

Movie file size

Recording format

Frame rateMovie recording size

Shooting duration

Movie/Playback

Shutter speed

Aperture

ISO speed

B Shooting Information Display

234

Highlight Alert

When the shooting information is displayed, any overexposed areas of the

image will blink. To obtain more image detail in the overexposed, blinking

areas, set the exposure compensation to a negative amount and shoot again.

Histogram

The brightness histogram shows the exposure level distribution and overall

brightness. The RGB histogram is for checking the color saturation and

gradation. The display can be switched with [

x2: Histogram disp

[Brightness] Display

This histogram is a graph showing the distribution of

the image’s brightness level. The horizontal axis

indicates the brightness level (darker on the left and

brighter on the right), while the vertical axis indicates

how many pixels exist for each brightness level. The

more pixels there are toward the left, the darker the

image. The more pixels there are toward the right,

the brighter the image. If there are too many pixels

on the left, the shadow detail will be lost. If there are

too many pixels on the right, the highlight detail will

be lost. The gradation in-between will be reproduced.

By checking the image and its brightness histogram,

you can see the exposure level inclination and the overall gradation.

[RGB] Display

This histogram is a graph showing the distribution of each primary

color’s brightness level in the image (RGB or red, green, and blue).

The horizontal axis indicates the color’s brightness level (darker on

the left and brighter on the right), while the vertical axis indicates how

many pixels exist for each color brightness level. The more pixels

there are toward the left, the darker and less prominent the color. The

more pixels there are toward the right, the brighter and denser the

color. If there are too many pixels on the left, the respective color

information will be lacking. If there are too many pixels on the right,

the color will be too saturated with no gradation. By checking the

image’s RGB histogram, you can see the color’s saturation and

gradation condition, as well as white balance inclination.

Sample Histograms

Dark image

Normal brightness

Bright image

235

Post-Processing

Images

After taking a picture, you can apply a Creative filter or

resize the JPEG image (reduce the number of pixels).

The camera may not be able to process images taken with

another camera.

Post-processing images as described in this chapter is not

possible while the camera is connected to a computer via the

interface cable.

236

You can apply the following Creative filters to an image and save it as a

new image: Grainy B/W, Soft focus, Fish-eye effect, Toy camera effect,

and Miniature effect.

1Select [Creative filters].

Under the [x1] tab, select [Creative

filters], then press <0>.

An image will be displayed.

2Select an image.

Select the image you want to apply a

filter to.

By pressing the <Hy> button, you

can switch to the index display and

select an image.

3Select a filter.

When you press <0>, the types of

Creative filters will be displayed

(p.238).

Press the <Y> <Z> keys to select a

filter, then press <0>.

The image will be displayed with the

effects of the filter applied.

4Adjust the filter effect.

Press the <Y> <Z> keys to adjust

the filter effect, then press <0>.

For the Miniature effect, press the

<W> <X> keys to move the white

frame to where you want the image to

look sharp, then press <0>.

U Applying Creative Filters

237

U Applying Creative Filters

5Save the image.

Select [OK] to save the image.

Check the destination folder and

image file number, then select [OK].

To apply a filter to another image,

repeat steps 2 to 5.

To return to the menu, press the

<M> button.

When shooting 1+73 or 1 image, the filter effect will be applied to

the 1 image and the image will be saved as a JPEG image.

If an aspect ratio was set for a 1 image and the filter effect is applied

to it, the image will be saved in the aspect ratio that is set.

Dust Delete Data (p.202) will not be appended to images with Fish-eye

effect applied.

U Applying Creative Filters

238

V Grainy B/W

Creates a grainy black-and-white photo. You can change the black-

and-white effect by adjusting the contrast.

W Soft focus

Gives the image a soft look. You can change the degree of softness

by adjusting the blur.

X Fish-eye effect

Gives the effect of a fish-eye lens. The image will have a barrel-type

distortion.

Depending on the level of this filter effect, the area trimmed along

the periphery of the image changes. Also, since this filter effect will

magnify the image center, the apparent resolution at the center may

degrade depending on the number of recorded pixels. Set the filter

effect in step 4 while checking the resulting image.

Y Toy camera effect

Darkens the photo’s corners and applies a color tone that makes it

look as if it was shot by a toy camera. You can change the color cast

by adjusting the color tone.

Z Miniature effect

Creates a diorama effect. You can change where the image looks

sharp. In step 4 on page 236, if you press the button, you

can switch between the white frame’s vertical and horizontal

orientations.

Creative Filter Characteristics

239

You can resize a JPEG image to make the pixel count lower and save it

as a new image. Resizing an image is possible only with JPEG 3/4/a/

b images. JPEG c and RAW images cannot be resized.

1Select [Resize].

Under the [x1] tab, select [Resize],

then press <0>.

An image will be displayed.

2Select an image.

Select the image you want to resize.

By pressing the <Hy> button, you

can switch to the index display and

select an image.

3Select the desired image size.

Press <0> to display the image

sizes.

Press the <Y> <Z> keys to select

the desired image size, then press

<0>.

4Save the image.

Select [OK] to save the resized

image.

Check the destination folder and

image file number, then select [OK].

To resize another image, repeat steps

2 to 4.

To return to the menu, press the

<M> button.

S Resizing JPEG Images

Target sizes

S Resizing JPEG Images

240

Resize Options by Original Image Size

The image sizes displayed in step 3 on the preceding page, such as

[***M ****x****], have a 3:2 aspect ratio. The image sizes by aspect

ratios are shown in the table below.

Original Image

Size

Available Resize Settings

4a b c

3kkkk

4kkk

akk

Image Sizes

Image

Quality

Aspect Ratio and Pixel Count (Approx.)

3:2 4:3 16:9 1:1

43984x2656

(10.6 megapixels)

3552x2664

(9.5 megapixels)

3984x2240*

(8.9 megapixels)

2656x2656

(7.1 megapixels)

a2976x1984

(5.9 megapixels)

2656x1992

(5.3 megapixels)

2976x1680*

(5.0 megapixels)

1984x1984

(3.9 megapixels)

b1920x1280

(2.5 megapixels)

1696x1280*

(2.2 megapixels)

1920x1080

(2.1 megapixels)

1280x1280

(1.6 megapixels)

c720x480

(350,000 pixels)

640x480

(310,000 pixels)

720x408*

(290,000 pixels)

480x480

(230,000 pixels)

The actual aspect ratio of images in the sizes marked with an asterisk

will differ from the aspect ratio indicated.

The image may be cropped slightly depending on the resizing conditions.

241

Printing Images

Printing (p.242)

You can connect the camera directly to a printer and print

out the images on the card. The camera is compliant with

“wPictBridge”, which is the standard for direct printing.

You can also use a wireless LAN to send images to a

PictBridge (Wireless LAN) printer and print them. For

details, refer to the Wireless Function Instruction Manual.

Digital Print Order Format (DPOF) (p.251)

DPOF (Digital Print Order Format) enables you to print

images recorded on the card according to your printing

instructions such as the image selection, quantity to print,

etc. You can print multiple images in one batch or give the

print order to a photofinisher.

Specifying Images for a Photobook (p.255)

You can specify images on the card for printing in a

photobook.

242

The direct printing procedure can be performed entirely with the

camera while looking at the setting screens on camera’s LCD monitor.

1Set the camera’s power switch to

<2>.

2Set up the printer.

For details, refer to the printer’s

instruction manual.

3Connect the camera to the

printer.

Connect them with an interface cable

(sold separately).

Connect the cable to the camera’s

digital terminal with the cable plug’s

<D> icon facing the front of the

camera.

To connect to the printer, refer to the

printer’s instruction manual.

4Turn on the printer.

5Set the camera’s power switch to

<1>.

Some printers may make a beeping

sound.

Preparing to Print

Connecting the Camera to a Printer

243

Preparing to Print

6Play back the image.

Press the <x> button.

The image will appear with the <w>

icon on the upper left of the screen to

indicate that the camera is connected

to a printer.

Before using the printer, make sure it has a PictBridge connection port.

Movies cannot be printed.

The camera cannot be used with printers compatible only with CP Direct

or Bubble Jet Direct.

If there is a long beeping sound in step 5, it indicates a problem with the

printer. Resolve the problem displayed in the error message (p.250).

If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected to

a printer. Set [Wi-Fi/NFC] to [Disable], then reconnect the camera to a

printer with an interface cable.

You can also print RAW images taken with this camera.

When you use a battery to power the camera, make sure it is fully

charged.

Before disconnecting the cable, first turn off the camera and printer. Hold

the plug (not the cord) to pull out the cable.

For direct printing, using DC Coupler DR-E10 (sold separately) and

Compact Power Adapter CA-PS700 (sold separately) to power the

camera is recommended.

244

The screen display and setting options will differ depending on the

printer. Some settings may not be available. For details, refer to the

printer’s instruction manual.

1Select the image to be printed.

Check that the <w> icon is

displayed on the upper left of the LCD

monitor.

Press the <Y> <Z> keys to select

the image to be printed.

2Press <0>.

The print setting screen will appear.

3Select [Paper settings].

Select [Paper settings], then press

<0>.

The paper settings screen will

appear.

w Printing

Printer-connected icon

Print setting screen

* Depending on the printer, certain settings such as the date and file

number imprinting and cropping may not be selectable.

Sets the printing effects (p.246).

Sets the date or file number imprinting to on or off.

Sets the quantity to be printed.

Sets the print area (p.249).

Sets the paper size, type, and layout.

Returns to the screen in step 1.

Starts the printing.

The paper size, type, and layout you have set are displayed.

245

w Printing

Select the size of the paper loaded in

the printer, then press <0>.

The paper type screen will appear.

Select the type of the paper loaded in

the printer, then press <0>.

The page layout screen will appear.

Select the page layout, then press

<0>.

The print setting screen will reappear.

*1: From the Exif data, the camera name, lens name, shooting mode, shutter

speed, aperture, exposure compensation amount, ISO speed, white balance,

etc. can be imprinted.

*2: After ordering the prints with “Digital Print Order Format (DPOF)” (p.251),

printing by following “Direct Printing of Print-Ordered Images” (p.254) is

recommended.

QSetting the Paper Size

YSetting the Paper Type

USetting the Page Layout

Bordered Prints with white borders along the edges.

Borderless Prints with no borders. If your printer cannot print borderless

prints, the print will have borders.

BorderedcImprints the shooting information*1 on the border on 9x13 cm or

larger prints.

xx-up Option to print 2, 4, 8, 9, 16, or 20 images on one sheet.

20-upc

35-upp

Prints 20 or 35 images as thumbnails on A4 or Letter size paper*2.

• Imprints the shooting information*1 with [20-upc].

Default

The page layout varies depending on the printer model or its settings.

If the image’s aspect ratio is different from the printing paper’s aspect ratio, the

image may be cropped significantly when you print it as a borderless print. If the

image is cropped, the print may look grainier due to the fewer number of pixels.

w Printing

246

4Set the printing effects (image

optimization).

Set them if necessary. If you do not

need to set any printing effects, go to

step 5.

Contents displayed on the screen

vary depending on the printer.

Select the option, then press <0>.

Select the desired printing effect, then

press <0>.

If the <e> icon is displayed brightly

next to <z>, you can also adjust

the printing effect (p.248).

When you change the printing effects, changes are reflected in the image

displayed on the upper left of the screen. Note that the printed image may look

slightly different from the displayed image, which is only an approximation.

This also applies to [Brightness] and [Adjust levels] on page 248.

Printing Effect Description

EOn Prints with the printer’s standard colors. The image’s Exif data

is used to make automatic corrections.

EOff No automatic correction is applied.

EVivid

Prints with higher saturation to produce more vivid blues and greens.

ENR Image noise is reduced before printing.

0 B/W Prints in black-and-white with true blacks.

0 Cool tone Prints in black-and-white with cool, bluish blacks.

Warm tone

Prints in black-and-white with warm, yellowish blacks.

zNatural Prints the image in the actual colors and contrast. No automatic

color adjustments are applied.

zNatural M

Printing characteristics are the same as the “Natural” setting.

However, this setting enables finer printing adjustments than

with “Natural”.

EDefault Printing differs depending on the printer. For details, refer to the

printer’s instruction manual.

If you imprint shooting information on an image shot at an expanded ISO

speed (H), the correct ISO speed may not be imprinted.

247

w Printing

5Set the date and file number

imprinting.

Set them if necessary.

Select , then press <0>.

Set the print settings as desired, then

press <0>.

6Set the number of copies.

Set it if necessary.

Select <R>, then press <0>.

Set the number of copies, then press

<0>.

7Start printing.

Select [Print], then press <0>.

The [Default] setting for printing effects and other options are the

printer’s own default settings as set by the printer’s manufacturer. Refer

to the printer’s instruction manual to find out what the [Default] settings

are.

Depending on the image’s file size and image-recording quality, it may

take some time for the printing to start after you select [Print].

If image tilt correction (p.249) is applied, it may take longer to print the

image.

To stop the printing, press <0> while [Stop] is displayed, then select

[OK].

If you execute [Clear all camera settings] (p.194), all the settings will

revert to their defaults.

w Printing

248

In step 4 on page 246, select the printing

effect. When the <e> icon is displayed

brightly next to <z>, you can press

the button to adjust the printing

effect. What can be adjusted or what is

displayed will depend on the selection

made in step 4.

Brightness

The image brightness can be adjusted.

Adjust levels

When you select [Manual], you can change

the histogram’s distribution and adjust the

image’s brightness and contrast.

With the Adjust levels screen displayed, press

the button to change the position of

the <h>. Press the <Y> <Z> keys to freely

adjust the shadow level (0-127) or highlight

level (128-255).

kBrightener

Effective in backlit conditions where the subject’s face looks dark.

When [On] is set, the face will be brightened for printing.

Red-eye corr.

Effective in flash images where the subject has red eyes. When [On]

is set, the red eye will be corrected for printing.

e Adjusting Printing Effects

The [kBrightener] and [Red-eye corr.] effects will not be reflected on

the screen.

When [Detail set.] is selected, you can adjust the [Contrast],

[Saturation], [Color tone], and [Color balance]. To adjust the [Color

balance], use the <S> cross keys. B is for blue, A for amber, M for

magenta, and G for green. The image’s color balance will be adjusted

toward the color in the direction of the move.

If you select [Clear all], all the printing effect settings will be reverted to

their defaults.

249

w Printing

You can crop the image and print only an

enlarged version of the cropped portion,

as if the image is recomposed.

Set the cropping right before printing.

If you change the print settings after

setting the cropping, you may have to set

the cropping again before printing.

1 On the print setting screen, select [Cropping].

2 Set the cropping frame size, position, and aspect ratio.



The image area within the cropping frame will be printed. The

cropping frame’s aspect ratio can be changed with [

Paper settings

Changing the Cropping Frame Size

Press the or <Hy> button to change the cropping frame

size. The smaller the cropping frame, the larger the image

magnification will be for printing.

Moving the Cropping Frame

Press the <S> cross keys to move the frame over the image

vertically or horizontally. Move the cropping frame until it covers

the desired image area.

Rotate the Cropping Frame

Pressing the button will toggle the cropping frame

between the vertical and horizontal orientations. This enables you

to create a vertically oriented print from a horizontal image.

Image Tilt Correction

By turning the <6> dial, you can adjust the image tilt angle up to

±10 degrees in 0.5-degree increments. When you adjust the

image tilt, the <O> icon on the screen will turn blue.

3 Press <0> to exit the cropping.

The print setting screen will reappear.

You can check the print area on the upper left of the print setting

screen.

Cropping the Image

Tilt correction

w Printing

250

Depending on the printer, the cropped image area may not be printed as

you specified.

The smaller you make the cropping frame, the grainier the picture will

look in the print.

Check the camera’s LCD monitor while cropping the image. If you look at

the image on a TV screen, the cropping frame may not be displayed

accurately.

Handling Printer Errors

If printing does not resume after you resolve a printer error (no ink, no paper,

etc.) and select [Continue], operate the buttons on the printer to resume

printing. For details on resuming the printing, refer to the printer’s instruction

manual.

Error Messages

If a problem occurs during printing, an error message will appear on the

camera’s LCD monitor. Press <0> to stop printing. After fixing the problem,

resume printing. For details on how to fix a printing problem, refer to the

printer’s instruction manual.

Paper Error

Check whether the paper is properly loaded in the printer.

Ink Error

Check the printer’s ink level and the waste ink tank.

Hardware Error

Check for any printer problems other than paper and ink problems.

File Error

The selected image cannot be printed via PictBridge. Images taken with a

different camera or images edited with a computer may not be printable.

251

You can set the print type, date imprinting, and file number imprinting.

The print settings will be applied to all print-ordered images. (They

cannot be set individually for each image.)

1Select [Print order].

Under the [x1] tab, select [Print

order], then press <0>.

2Select [Set up].

Select [Set up], then press <0>.

3Set the option as desired.

Set the [Print type], [Date], and [File

No.].

Select the option to be set, then press

<0>. Select the desired setting, then

press <0>.

W Digital Print Order Format (DPOF)

Setting the Printing Options

[Print type][Date][File No.]

W Digital Print Order Format (DPOF)

252

4 Exit the setting.

Press the <7> button.

The print order screen will reappear.

Next, select [Sel.Image], [Byn], or

[All images] to order the images to

be printed.

Print type

KStandard Prints one image on one sheet.

LIndex Multiple thumbnail images are printed on

one sheet.

LBoth Prints both the standard and index prints.

Date On [On] imprints the recorded date on the print.

Off

File number On [On] imprints the file number on the print.

Off

RAW images and movies cannot be print ordered. You can print RAW

images with PictBridge (p.242).

Even if [Date] and [File No.] are set to [On], the date or file number may

not be imprinted depending on the print type setting and printer model.

With [Index] prints, the [Date] and [File No.] cannot both be set to [On]

at the same time.

When printing, use the card whose print order specifications have been

set. It cannot be printed with the specified print order if you just extract

images from the card and try to print them.

Certain DPOF-compatible printers and photofinishers may not be able to

print the images as you specified. Refer to the printer’s instruction

manual before printing, or check with your photofinisher about

compatibility when ordering prints.

Do not insert into the camera a card whose print order was set by a

different camera and then try to specify a print order. The print order may

be overwritten. Also, the print order may not be possible, depending on

the image type.

253

W Digital Print Order Format (DPOF)

Selecting images

Select and order images one by one.

To display the three-image display, press

the <Hy> button. To return to the

single-image display, press the

button.

Press the <M> button to save the

print order to the card.

[Standard] [Both]

Press the <W> <X> keys to set the

number of copies to be printed for the

displayed image.

[Index]

Press the <W> <X> keys to add a

checkmark to the box <X>. The image

will be included in the index print.

Byn

Select [Mark all in folder] and select the folder. A print order for one

copy of all the images in the folder will be specified. If you select

[Clear all in folder] and select the folder, the print order for that

folder will all be canceled.

All images

If you select [Mark all on card], one copy of all the images on the

card will be set for printing. If you select [Clear all on card], the print

order will be cleared for all the images on the card.

Print Ordering

Quantity

Total images selected

Index icon

Checkmark

Note that RAW images and movies will not be included in the print order

even if you set [Byn] or [All images].

When using a PictBridge-compatible printer, do not specify more than

400 images for one print order. If you specify more than this, all the

images may not be printed.

254

With a PictBridge printer, you can easily

print images with DPOF.

1 Prepare to print.

See page 242.

Follow the “Connecting the Camera to a Printer” procedure up to step 5.

2 Under the [x1] tab, select [Print order].

3 Select [Print].

[Print] will be displayed only if the camera is connected to a

printer and printing is possible.

4 Set the [Paper settings] (p.244).

Set the printing effects (p.246) if necessary.

5 Select [OK].

W Direct Printing of Print-Ordered Images

Before printing, be sure to set the paper size.

Certain printers cannot imprint the file number.

If [Bordered] is set, certain printers may imprint the date on the border.

Depending on the printer, the date may appear faint if it is imprinted on a

bright background or on the border.

Under [Adjust levels], [Manual] cannot be selected.

If you stopped the printing and want to resume printing the remaining

images, select [Resume]. Note that printing will not resume if any of the

following occurs.

• You changed the print order or deleted any of the print ordered images

before resuming the printing.

• When index is set, you changed the paper setting before resuming the

printing.

• The card’s remaining capacity was low when you paused the printing.

If a problem occurs during printing, see page 250.

255

You can specify up to 998 images to be printed in a photobook. When

you use EOS Utility (EOS software) to transfer images to a computer,

the specified images will be copied into a dedicated folder. This function

is useful for ordering photobooks online and for printing photobooks on

a printer.

1Select [Photobook Set-up].

Under the [x1] tab, select

[Photobook Set-up], then press

<0>.

2Select [Select images].

Select [Select images], then press

<0>.

An image will be displayed.

To display the three-image display,

press the <Hy> button. To return to

the single-image display, press the

button.

3Select the image to be specified.

Press the <Y> <Z> keys to select

the image to be specified, then press

the <W> <X> keys.

Repeat this step to select another

image. The number of images that

have been specified will be displayed

on the upper left of the screen.

To cancel the image specification,

press the <W> <X> keys again.

To return to the menu, press the

<M> button.

p Specifying Images for a Photobook

Specifying One Image at a Time

p Specifying Images for a Photobook

256

You can specify all the images in a folder or on a card at once.

When [x1: Photobook Set-up] is set

to [All images in folder] or [All images

on card], all the images in the folder or

on the card will be specified.

To cancel the image specification, select

[Clear all in folder] or [Clear all on

card].

Specifying All Images in a Folder or on a Card

RAW images and movies cannot be specified.

Do not specify images already specified for a photobook in another

camera for another photobook with this camera. The photobook settings

may be overwritten.

257

Customizing the

Camera

You can make fine adjustments to various camera

functions to suit your picture-taking preferences with

Custom Functions. Custom Functions can be set and

used only in Creative Zone modes.

258

1Select [Custom Functions (C.Fn)].

Under the [53] tab, select [Custom

Functions (C.Fn)], then press <0>.

2Select the Custom Function

number.

Press the <Y> <Z> keys to select

the Custom Function number, then

press <0>.

3Change the setting as desired.

Press the <W> <X> keys to select

the desired setting (number), then

press <0>.

Repeat steps 2 and 3 if you want to

set other Custom Functions.

At the bottom of the screen, the

current Custom Function settings are

indicated below the respective

function numbers.

4Exit the setting.

Press the <M> button.

The screen for step 1 will reappear.

Under [53: Clear settings], select [Clear all Custom Func. (C.Fn)] to

clear all the Custom Function settings (p.194).

3 Setting Custom FunctionsN

Custom Function number

Clearing All Custom Functions

259

3 Setting Custom FunctionsN

* If you use an EX-series Speedlite (sold separately) equipped with an LED light,

the LED light will turn on for AF-assist even in the d or c mode.

Custom Functions

C.Fn I: Exposure ALV Shooting

1Exposure level increments

p.260

2ISO expansion k

Flash synchronization speed in Av mode

p.261 k

C.Fn II: Image

4Long exposure noise reduction p.262 k

5High ISO speed noise reduction

p.263

6 Highlight tone priority k

C.Fn III: Autofocus/Drive

7AF-assist beam firing p.264 k (With f*)

C.Fn IV: Operation/Others

8Shutter/AE lock button p.265 k

9Assign SET button

p.266

k (Except 3)

10 Flash button function k

11 LCD display when power ON

Custom Functions cannot be set during movie shooting. (Settings

already set will also be disabled.)

Shaded Custom Function does not function during Live View (LV)

shooting.

260

Custom Functions are organized into four groups based on the function

type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn

IV: Operation/Others.

3 Custom Function SettingsN

C.Fn I: Exposure

C.Fn-1 Exposure level increments

0: 1/3-stop

1: 1/2-stop

Sets 1/2-stop increments for the shutter speed, aperture, exposure

compensation, AEB, flash exposure compensation, etc. This is

effective when you prefer to control the exposure in less fine

increments than 1/3-stop increments.

C.Fn-2 ISO expansion

0: Off

1: On

When you set the ISO speed, you will be able to set “H”

(equivalent to ISO 12800). Note that if [C.Fn-6: Highlight tone

priority] is set to [1: Enable], “H” cannot be set.

When 1 is set, the exposure level will be displayed in the viewfinder and on

the LCD monitor as shown below.

261

3 Custom Function SettingsN

C.Fn-3 Flash Synchronization Speed in Av Mode

You can set the flash sync speed for flash photography in the

aperture-priority AE <f> mode.

0: Auto

The flash sync speed is set automatically within a range of 1/200

sec. to 30 sec. to suit the scene’s brightness. With an external

Speedlite, high-speed sync will also be possible.

1: 1/200-1/60 sec. auto

Prevents a slow shutter speed from being set in low-light

conditions. It is effective for preventing subject blur and camera

shake. However, while the subject will be properly exposed with

the flash, the background may come out dark.

2: 1/200 sec. (fixed)

The flash sync speed is fixed at 1/200 sec. This more effectively

prevents subject blur and camera shake than [1: 1/200-1/60sec.

auto]. However, in low light, the subject’s background will come

out darker than with [1: 1/200-1/60sec. auto].

When 1 or 2 is set, high-speed sync cannot be used with an external

Speedlite.

3 Custom Function SettingsN

262

C.Fn II: Image

C.Fn-4 Long Exposure Noise Reduction

0: Off

1: Auto

For exposures of 1 sec. or longer, noise reduction is performed

automatically if noise typical of long exposures is detected. This

[Auto] setting is effective in most cases.

2: On

Noise reduction is performed for all exposures of 1 sec. or longer.

The [2: On] setting may reduce noise that cannot be detected with

the [1: Auto] setting.

With settings 1 and 2, after the picture is taken, the noise reduction

process may take the same amount of time as the exposure. You cannot

take another picture until the noise reduction process is completed.

At ISO 1600 or higher, noise may be more pronounced with setting 2

than with setting 0 or 1.

With setting 1 or 2, if a long exposure is shot with the Live View image

displayed, “BUSY” will be displayed during the noise reduction process.

The Live View display will not appear until the noise reduction is

completed. (You cannot take another picture.)

263

3 Custom Function SettingsN

C.Fn-5 High ISO speed noise reduction

This function reduces the noise generated in the image. Although

noise reduction is applied at all ISO speeds, it is particularly effective

at high ISO speeds. At low ISO speeds, the noise in the darker parts of

the image (shadow areas) is further reduced. Change the setting to

suit the noise level.

0: Standard 2: Strong

1: Low 3: Disable

C.Fn-6 Highlight tone priority

0: Disable

1: Enable

Improves the highlight detail. The dynamic range is expanded from

the standard 18% gray to bright highlights. The gradation between

the grays and highlights becomes smoother.

With setting 2, the maximum burst during continuous shooting will greatly

decrease. Also, the continuous shooting speed may be slower.

If you play back or directly print a 1 or 1+73 image with the

camera, the high ISO speed noise reduction effect may become smaller.

Check the noise reduction effect or print noise-reduced images with

Digital Photo Professional (EOS software, p.314).

If you send RAW images to a smartphone, the high ISO speed noise

reduction effect of saved images on the smartphone may become

smaller. Therefore, if you shoot RAW images, setting the image-

recording quality to 1+73 is recommended.

With setting 1, the Auto Lighting Optimizer (p.123) is automatically set to

[Disable] and the setting cannot be changed.

With setting 1, noise (grainy image, banding, etc.) may become slightly

more noticeable than with setting 0.

With setting 1, the ISO setting range will be ISO 200 - ISO 6400.

Also, the <A> icon will be displayed on the LCD monitor and in the

viewfinder to indicate that highlight tone priority is enabled.

3 Custom Function SettingsN

264

C.Fn III: Autofocus/Drive

C.Fn-7 AF-assist beam firing

Enables or disables the built-in flash’s AF-assist beam or the EOS-

dedicated external Speedlite’s AF-assist beam.

0: Enable

The AF-assist beam will be emitted when necessary.

1: Disable

The AF-assist beam will not be emitted. This prevents the AF-

assist beam from disturbing others.

2: Enable external flash only

If an external Speedlite is attached, it will emit the AF-assist beam

when necessary. The camera’s built-in flash will not fire the AF-

assist beam.

3: IR AF assist beam only

When an external Speedlite is attached, only the infrared AF-assist

beam will be emitted. This prevents any Speedlite which uses a

series of intermittent flashes (like the built-in flash) from emitting

the AF-assist beam.

With an EX-series Speedlite equipped with an LED light, the LED

light will not automatically turn on for AF-assist.

If an external Speedlite’s [AF-assist beam firing] Custom Function is set

to [Disabled], the Speedlite will not emit the AF-assist beam even if the

camera’s C.Fn-7 is set to 0, 2, or 3.

265

3 Custom Function SettingsN

C.Fn IV: Operation/Others

C.Fn-8 Shutter/AE lock button

0: AF/AE lock

1: AE lock/AF

This is convenient when you want to focus and meter separately.

Press the <A> button to autofocus, and press the shutter button

halfway to apply AE lock.

2: AF/AF lock, no AE lock

During AI Servo AF, you can press the <A> button to pause the

AF operation momentarily. This prevents the AF from being thrown

off by any obstacle passing between the camera and subject. The

exposure is set at the moment the picture is taken.

3: AE/AF, no AE lock

This is useful for subjects that keep moving and stopping

repeatedly. During AI Servo AF, you can press the <A> button to

start or stop the AI Servo AF operation. The exposure is set at the

moment the picture is taken. Thus, you can set your camera, so

that the optimum focusing and exposure can be achieved and wait

for the decisive moment.

During Live View shooting

With setting 1 or 3, press the <A> button for One-Shot AF.

With setting 0 or 2, press the shutter button halfway for One-Shot AF.

3 Custom Function SettingsN

266

C.Fn-9 Assign SET button

You can assign a frequently-used function to <

>. When the camera is ready to

shoot, pressing the <

> button will display the respective function setting screen.

0: Normal (disabled)

1: Image quality

The image quality setting screen will appear. Select the desired

image-recording quality, then press <0>.

2: Flash exposure compensation

The flash exposure compensation setting screen will appear. Set

the adjustment amount, then press <0>.

3: LCD monitor On/Off

You can turn on or off the LCD monitor.

4: Depth-of-field preview

The lens will stop down to the aperture that was set, and you can see the depth

of field (range of acceptable focus) in the viewfinder or in the Live View image.

C.Fn-10 Flash button function

0: Raise built-in flash

1: ISO speed

The ISO speed setting screen will appear. Press the <Y> <Z>

keys or turn the <6> dial to change the ISO speed. You can also

refer to the viewfinder to set the ISO speed.

C.Fn-11 LCD display when power ON

0: Display on

When you turn on the power, the shooting function settings will be

displayed (p.54).

1: Previous display status

If you pressed the button and turned off the camera while

the LCD monitor was off, the shooting function settings will not be

displayed when you turn on the camera again. This helps to save

battery power. The menu operations and image playback will be

available as usual.

If you pressed the button to display the shooting function

settings and then turned off the camera, the shooting settings will

be displayed when you turn on the camera again.

267

Under the My Menu tab, you can register up to six menu options and

Custom Functions whose settings you change frequently.

1Select [My Menu settings].

Under the [9] tab, select [My Menu

settings], then press <0>.

2Select [Register to My Menu].

Select [Register to My Menu], then

press <0>.

3Register the desired items.

Select the item, then press <0>.

On the confirmation dialog, select

[OK] and press <0> to register the

item.

You can register up to six items.

To return to the screen in step 2,

press the <M> button.

Sort

You can change the order of the registered items in My Menu. Select

[Sort] and select the item whose order you want to change. Then

press <0>. With [z] displayed, press the <W> <X> keys to

change the order, then press <0>.

Delete item/items and Delete all items

You can delete any of the registered items. [Delete item/items]

deletes one item at a time, and [Delete all items] deletes all

registered items.

Display from My Menu

When [Enable] is set, the [9] tab will be displayed first when you

display the menu screen.

3 Registering My MenuN

My Menu Settings

268

269

Reference

This chapter provides reference information for camera

features, system accessories, etc.

Certification Logo

Under the [53] tab, if you select [Certification Logo Display]

and press <0>, some of the logos of the camera’s certifications

will appear. Other certification logos can be found in this

Instruction Manual, on the camera body, and on the camera’s

package.

270

You can power the camera with a household power outlet by using the

DC Coupler DR-E10 and Compact Power Adapter CA-PS700 (both

sold separately).

1Connect the DC coupler.

Connect the DC cord’s plug to the DC

coupler.

2Insert the DC coupler.

Open the cover and insert the DC

coupler until it locks in place.

3Push in the DC cord.

Open the DC cord hole cover and

install the cord as shown in the

illustration.

Close the cover.

4Connect the power cord.

Connect the power cord as shown in

the illustration.

After using the camera, unplug the

power plug from the power outlet.

Using a Household Power Outlet

Do not connect or disconnect the power cord when the camera’s power

switch is set to <1>.

AC Adapter Kit ACK-E10 can also be used.

271

Remote Switch RS-60E3 (sold separately) comes with an approx. 60 cm/

2.0 ft cord. When connected to the camera’s remote control terminal, it

can be pressed halfway and completely, just like the shutter button.

When you use the self-timer, bulb, or a remote switch and do not look

through the viewfinder, stray light entering the viewfinder can cause the

picture to look dark (underexposure). To prevent this, use the eyepiece

cover (p.33) attached to the camera strap.

During Live View shooting and movie shooting, attaching the

eyepiece cover is unnecessary.

1Detach the eyecup.

Push the bottom of the eyecup to

detach it.

2Attach the eyepiece cover.

Slide the eyepiece cover down into

the eyepiece groove to attach it.

After you finish shooting, detach the

eyepiece cover and attach the

eyecup by sliding it down into the

eyepiece groove.

F Using a Remote Switch

Using the Eyepiece Cover

Remote Controller RC-6, RC-1, and RC-5 (all sold separately) cannot be

used with this camera.

272

Easy basic operation, like using a built-in flash.

When an EX-series Speedlite (sold separately) is attached to the

camera, almost all the autoflash control is done by the camera. In other

words, it is like a high-output flash attached externally in place of the

built-in flash.

For detailed instructions, refer to the EX-series Speedlite’s

instruction manual. This camera is a Type-A camera.

External Speedlites

EOS-dedicated, EX-series Speedlites

Canon Speedlites other than the EX-series will not fire.

If the camera is used with a flash unit or flash accessory dedicated to

another camera brand, not only will the camera not operate as usual but

it may also result in a malfunction.

The flash fires only once even when MULTI flash is set with the

Speedlite.

With an EX-series Speedlite not compatible with flash function settings

(p.199), only [Flash exp. comp] and [E-TTL II meter.] can be set for

[External flash func. setting]. ([Shutter sync.] can also be set with

certain EX-series Speedlites.)

If flash exposure compensation is set with the external Speedlite, the

flash exposure compensation icon displayed on the camera’s LCD

monitor will change from y to 0.

If the external Speedlite’s Custom Function has the flash metering mode

set to TTL autoflash, the flash will not fire.

273

With a commercially-available Eye-Fi card already set up, you can

automatically transfer captured images to a computer or upload them to

an online service via a wireless LAN.

The image transfer is a function of the Eye-Fi card. For instructions on

how to set up and use the Eye-Fi card or to troubleshoot any image

transfer problems, refer to the Eye-Fi card’s instruction manual or

contact the card manufacturer.

The camera is not guaranteed to support Eye-Fi card functions

(including wireless transfer). In case of a problem with an Eye-

Fi card, please check with the card manufacturer. Also note that

approval is required to use Eye-Fi cards in many countries or

regions. Without approval, use of the card is not permitted. If it

is unclear whether the card has been approved for use in your

area, please check with the card manufacturer.

1Insert an Eye-Fi card (p.36).

2Select [Eye-Fi settings].

Under the [51] tab, select [Eye-Fi

settings], then press <0>.

This menu is displayed only when an

Eye-Fi card is inserted into the

camera.

3Enable Eye-Fi transmission.



Select [

Eye-Fi trans.

], then press <

Select [Enable], then press <0>.

If you set [Disable], there will be no

automatic transmission even with the

Eye-Fi card inserted (transmission

status icon I).

Display the connection information.

Select [Connection info.], then press

<0>.

H Using Eye-Fi Cards

274

5Check the [Access point SSID:].

Check that an access point is

displayed for [Access point SSID:].

You can also check the Eye-Fi card’s

MAC address and firmware version.

Press the <M> button three times

to exit the menu.

6Take the picture.

The picture is transferred and the

<H> icon switches from gray (not

connected) to one of the icons below.

For transferred images, O is

displayed in the shooting information

display (p.232).

H (Gray) Not connected : No connection with access point.

H (Blinking) Connecting... : Connecting to access point.

H (Illuminated) Connected:

Connection to access point established.

H () Transferring... :

Image transfer to access point in progress.

Transmission status icon

275

H Using Eye-Fi Cards

Cautions for Using Eye-Fi Cards

If [53:Wi-Fi/NFC] is set to [Enable], image transfer with an Eye-Fi card

is not possible.

If “J” is displayed, an error occurred while retrieving the card

information. Turn the camera power off and on again.

Even if [51: Eye-Fi trans.] is set to [Disable], it may still transmit a

signal. In hospitals, airports, and other places where wireless

transmissions are prohibited, remove the Eye-Fi card from the camera in

advance.

If the image transfer does not function, check the Eye-Fi card and

computer settings. For details, refer to the card’s instruction manual.

Depending on the wireless LAN’s connection conditions, the image

transfer may take longer or it may be interrupted.

The Eye-Fi card may become hot as it transmits.

The battery power will be consumed faster.

During the image transfer, auto power off will not take effect.

If you insert a wireless LAN card other than an Eye-Fi card, [51: Eye-Fi

settings] will not appear. Also, the transmission status icon <H> will not

appear.

276

o: Set automatically k: User selectable

: Not selectable/Disabled

*1: Settable only for manual exposures.

*2: If used during movie shooting, it will switch to <d>.

Function Availability Table by Shooting Mode

Mode Dial Basic Zone Creative Zone k

A 7 C2 3 4 5 P 6 d sf a

All image quality settings

selectable kkkkkkk k kkkkk

ISO speed

Automatically set/

Auto ooooooo o okkkk k

Manually set kkkkk

Maximum for Auto kkkk

Picture

Style

Automatically set/

Auto ooooooo o okkkk k

Manual selection kkkk k

Ambience-based shots kkkkk k k

Lighting/scene-based shots kkkk

Blurring/sharpening the

background k

Color tone k

White

balance

Auto QQQQQQQQwQkkkk k

Preset kkkk k

Custom kkkk k

Correction/

Bracketing kkkk

Auto Lighting Optimizer ooooooo o okkkk k

Peripheral illumination correction

kkkkkkk k kkkkk k

Long exposure noise reduction

kkkk

High ISO speed noise reduction

ooooooo o okkkk

Highlight tone priority kkkk k

Color space sRGB ooooooo o okkkk o

Adobe RGB kkkk

AF operation

(Viewfinder

shooting)

One-Shot AF ooo o okkkk

AI Servo AF okkkk

AI Focus AF ooo kkkk

AF operation

(Live View

shooting)

One-Shot AF ooooooo o ooooo o

AF method

(Live View

shooting)

dkkkkkkk k kkkkk k

ckkkkkkk k kkkkk k

fkkkkkkk k kkkkkk

277

Function Availability Table by Shooting Mode

*3:

When an external Speedlite is used, it will emit the AF-assist beam when necessary.

*4: If the AF method is <f> during Live View shooting / movie shooting, the

external Speedlite will emit the AF-assist beam when necessary.

*5: Settable only for autoexposures.

*6: Settable only during Live View shooting.

Mode Dial Basic Zone Creative Zone k

A 7 C2 3 4 5 P 6 d s f a

AF AF point selection kkkk

AF-assist beam ooo *3 o*4 ookkkk *4

Metering

mode

Evaluative metering

oooooooookkkk

Metering mode

selection kkkk

Exposure

Program shift k

Exposure

compensation kkk k*5

AEB kkkk

AE lock kkk k*5

Depth-of-field preview

k (C.Fn-9-4)

Drive/

self-timer

Single shooting kkk kk kkkkkk

Continuous shooting

kk kkkkk

j (10 sec.) kkkkkkkkkkkkk

l (2 sec.) kkkk

q (Continuous) kkkkkkkkkkkkk

Built-in

flash

Automatic firing oko o o

Flash on (Fires at

all times) k k kkkk

Flash off ok ook kkkk o

Red-eye reduction kkk kkkkkkk

FE lock kkkk

Flash exposure

compensation kkkk

External

flash

Function settings kkkk

Custom Function

settings kkkk

Live View shooting kkkkkkkkkkkkk

Aspect ratio*6 kkkk

Quick Control kkkkkkkkkkkkk k

Feature guide kkkkkkkkkkkkk k

278

System Map

Bundled

Accessories

270EX IIST-E2 ST-E3-RT Macro Ring Lite

MR-14EX II

Battery Pack

LP-E10

Battery Charger

LC-E10E

Strap

Eyecup Ef

Compact Power

Adapter

CA-PS700

DC Coupler

DR-E10*1

430EX III-RT/

430EX III

Eyepiece Extender

EP-EX15

Rubber Frame Ef

E-series Dioptric

Adjustment Lenses

Angle Finder C

Semi Hard Case

EH26-L/EH27-L

Magnifier

MG-Ef

600EX II-RT Macro Twin Lite

MT-26EX-RT

Hand Strap E2

Protecting Cloth

PC-E1/PC-E2

279

System Map

SD/SDHC/SDXC

memory card Card reader

Interface Cable IFC-200U/500U

(1.9 m/6.2 ft.) / (4.7 m/15.4 ft.)

PictBridge-compatible printer

HDMI Cable

HTC-100 (2.9 m/9.5 ft.)

TV set/Monitor

EF lenses EF-S lenses

Remote Switch

RS-60E3

GPS Receiver

GP-E2

*1: AC Adapter Kit ACK-E10 can also be used.

*2: When using the GP-E2 with this camera, connect it to the camera with the cable provided

with the GP-E2.

* All cable lengths given are approximate figures.

Remote Controller Adapter RA-E3

Connect Station

CS100

Timer Remote

Controller

TC-80N3

Card slot

USB port

Computer

Interface Cable

IFC-400PCU (1.3 m/4.3 ft.)

280

J Shooting 1 (Red) Page

K Shooting 2 (Red)

3 Menu Settings

Viewfinder Shooting and Live View Shooting

Image quality 73 / 83 / 74 / 84 / 7a / 8a / b / c /

1+73 / 188

Beep Enable / Disable 184

Release shutter

without card Enable / Disable 184

Image review Off / 2 sec. / 4 sec. / 8 sec. / Hold 184

Peripheral illumination

correction

Enable / Disable 124

Red-eye reduction Disable / Enable 106

Flash control

Flash firing / Built-in flash function setting /

External flash function setting / External flash

C.Fn setting / Clear external flash C.Fn setting

198

Exposure

compensation/AEB

1/3-stop or 1/2-stop increments, ±5 stops

(AEB: ±2 stops)

116

118

Auto Lighting

Optimizer Disable / Low / Standard / High 123

Metering mode Evaluative metering / Partial metering /

Center-weighted average metering 115

Custom White

Balance Manual setting of white balance 133

White balance shift/

bracketing

WB correction: White balance correction

BKT setting: White balance bracketing

135

136

Color space sRGB / Adobe RGB 137

Picture Style

DAuto / PStandard / QPortrait /

RLandscape / SNeutral / UFaithful /

VMonochrome / WUser Def. 1-3

126

129

Shaded menu options are not displayed in Basic Zone modes.

281

3 Menu Settings

L Shooting 3 (Red) Page

M Shooting 4* (Red)

* In Basic Zone modes, these menu options are displayed under the [z2] tab.

1 Playback 1 (Blue)

Dust Delete Data Obtains data to be used to erase dust spots 202

ISO Auto Max.:400 / Max.:800 / Max.:1600 / Max.:3200 /

Max.:6400 94

Live View shooting Enable / Disable 141

AF method FlexiZone - Single / uLive mode / Quick mode 148

Grid display Off / Grid 1l / Grid 2m145

Aspect ratio 3:2 / 4:3 / 16:9 / 1:1 146

Metering timer 4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. /

10 min. / 30 min. 147

Protect images Protect images 228

Rotate image Rotate images 211

Erase images Erase images 230

Print order Specify images to be printed (DPOF) 251

Photobook Set-up Specify images for a photobook 255

Creative filters Grainy B/W / Soft focus / Fish-eye effect /

Toy camera effect / Miniature effect 236

Resize Downsize JPEG image’s pixel count 239

3 Menu Settings

282

2 Playback 2 (Blue) Page

4 Set-up 1 (Yellow)

6 Set-up 2 (Yellow)

Histogram display Brightness / RGB 234

Image jump w/61 image / 10 images / 100 images / Date /

Folder / Movies / Stills / Rating 209

Slide show Playback description / Display time / Repeat /

Transition effect / Background music 222

Rating [OFF] / l / m / n / o / p212

Auto power off 30 sec. / 1 min. / 2 min. / 4 min. / 8 min. /

15 min. / Disable 185

Auto rotate OnzD / OnD / Off 192

Format card Initialize and erase data on the card 52

File numbering Continuous / Auto reset / Manual reset 188

Select folder Create and select a folder 186

Screen color Select the shooting settings screen color 197

Eye-Fi settings Displayed when a commercially-available

Eye-Fi card is inserted 273

LCD brightness Adjust the brightness (seven levels) 185

LCD off/on button Shutter button / Shutter/DISP / Remains on 197

Date/Time/Zone Date (year, month, day) / Time (hour, min.,

sec.) / Daylight saving time / Time zone 41

LanguageKSelect the interface language 43

Clean manually Clean image sensor manually 204

Feature guide Enable / Disable 55

GPS device settings Settings available when the GPS Receiver

GP-E2 (sold separately) is attached 283

283

3 Menu Settings

7 Set-up 3 (Yellow) Page

* For details, refer to the Wireless Function Instruction Manual.

9 My Menu (Green)

Wi-Fi/NFC Disable / Enable

Allow NFC connections

Wi-Fi function

Transfer images between cameras /

Connect to smartphone /

Print from Wi-Fi printer / Upload to Web service

Certification Logo

Display

Displays some of the logos of the camera’s

certifications 269

Custom Functions (C.Fn )

Customize camera functions as desired 258

Display copyright information /

Enter author’s name / Enter copyright details /

Delete copyright information

190

Clear settings Clear all camera settings / Clear all Custom

Func. (C.Fn) 194

Firmware Ver. For updating the firmware -

My Menu settings Register frequently-used menu options and

Custom Functions 267

When using a wireless communication function, be sure to check the

countries and areas of use, and observe the laws and regulations of the

country or region.

[Wi-Fi/NFC] cannot be set if the camera is connected to a computer,

printer, GPS receiver, TV set, or other device with a cable. When [Wi-Fi/

NFC] is set to [Enable], you cannot connect the camera to the above

devices with a cable.

Cautions for Using GPS Receiver GP-E2 (sold separately)

Be sure to check the countries and areas of use, and observe the laws

and regulations of the country or region.



When using the GP-E2 with the camera, connect it to the camera with the

cable that came with the GP-E2. If you do not use the provided cable, the

geotag information will not be appended to the image when you shoot.



Certain functions of the GP-E2 will not work with this camera. Note the following:

• The shooting direction is not recorded. (The digital compass cannot be

used.)

• The geotag information can be appended to a movie when the

shooting starts. However, the location will not be displayed on Map

Utility (EOS software). Check the location with the camera.

3 Menu Settings

284

a Movie 1 (Red) Page

c Movie 2 (Red)

k Movie Shooting

Movie exposure Auto / Manual 176

AF method FlexiZone - Single / uLive mode /

Quick mode 176

AF with shutter button

during movie recording Disable / Enable 176

kShutter button/

AE lock button

AF/AE lock / AE lock/AF /

AF/AF lock, no AE lock /

AE/AF, no AE lock

177

kHighlight tone

priority Disable / Enable 177

Movie recording size 1920x1080 (6/5/4) / 1280x720 (8/7) /

640x480 (6/5)168

Sound recording

Sound recording: Auto / Manual / Disable

178Recording level

Wind filter: Disable/ Enable

Metering timer 4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. /

10 min. / 30 min. 179

Grid display Off / Grid 1l / Grid 2m179

Video snapshot Disable / 2 sec. movie / 4 sec. movie /

8 sec. movie 170

Video system NTSC / PAL 179

285

3 Menu Settings

d Movie 3 (Red) Page

Exposure

compensation 1/3-stop increments, ±3 stops 180

Auto Lighting

Optimizer Disable / Low / Standard / High 180

Custom White Balance Manual setting of white balance 180

Picture Style

DAuto / PStandard / QPortrait /

RLandscape / SNeutral / UFaithful /

VMonochrome / WUser Def. 1-3

180

Menus for Movie Shooting Mode

The [k1], [k2], and [k3] tabs appear only in the movie shooting

mode.

The [z2], [z3], [z4], and [9] tabs do not appear.

The following menu items do not appear:

•[z1]: Red-eye reduction, Flash control

•[51]: Screen color

•[52]: LCD off/on button, Clean manually

•[53]: Certification Logo Display, Custom Functions (C.Fn), Copyright

information, Clear settings, Firmware Ver.

286

If a problem occurs with the camera, first consult this Troubleshooting

Guide. If this Troubleshooting Guide does not resolve the problem,

contact your dealer or nearest Canon Service Center.

Do not use any battery other than a genuine Canon Battery Pack

LP-E10.

If the battery charger has a problem, the protection circuit will stop the

charging and the charge lamp will blink in orange. If this happens,

unplug the charger’s power plug from the power outlet and detach the

battery. Attach the battery to the charger again and wait a while before

connecting the charger to a power outlet again. If the problem persists,

contact your dealer or nearest Canon Service Center.

Make sure the battery is properly installed in the camera (p.36).

Make sure the card slot/battery compartment cover is closed (p.36).

Recharge the battery (p.34).

Press the button (p.54).

If the power is turned off while an image is being recorded to the card,

the access lamp will remain on/continue to blink for a few seconds.

When the image recording is completed, the power will turn off

automatically.

Troubleshooting Guide

Power-Related Problems

The battery does not recharge.

The battery charger’s lamp blinks.

The camera does not operate even when the power

switch is set to <1>.

The access lamp still lights or blinks even when the

power switch is <2>.

287

Troubleshooting Guide

Use a fully-charged battery (p.34).

The rechargeable battery performance will degrade over repeated

use. Purchase a new one.

The number of possible shots will decrease with any of the following

operations:

• Pressing the shutter button halfway for a prolonged period.

• Activating the AF frequently without taking a picture.

• Using the lens’s Image Stabilizer.

• Using the LCD monitor frequently.

• Continuing Live View shooting or movie shooting for a prolonged

period.

• Using the Wi-Fi function.

• The Eye-Fi card’s communication function is operating.

Auto power off is in effect. If you do not want auto power off to take

effect, set [51: Auto power off] to [Disable] (p.185).

Even if [51: Auto power off] is set to [Disable], the LCD monitor will

still turn off after the camera is left idle for approx. 30 min. (The

camera’s power does not turn off.) Press the button to turn on

the LCD monitor.

The camera cannot be used with EF-M lenses (p.44).

The battery becomes exhausted quickly.

The camera turns off by itself.

Shooting-Related Problems

The lens cannot be attached.

Troubleshooting Guide

288

Make sure the card is properly inserted (p.36).

Slide the card’s write-protect switch to the write/erase position (p.36).

If the card is full, replace the card or delete unnecessary images to

make space (p.36, 230).

If you try to focus in the One-Shot AF mode and the focus indicator

<o> in the viewfinder blinks, a picture cannot be taken. Press the

shutter button halfway again to refocus automatically, or focus

manually (p.47, 101).

If a card error message is displayed, see page 38 or 298.

Set the lens’s focus mode switch to <AF> (p.44).

Press the shutter button gently to prevent camera shake (p.46-47).

If the lens has an Image Stabilizer, set the IS switch to <1>.

In low light, the shutter speed may become slow. Use a faster shutter

speed (p.108), set a higher ISO speed (p.92), use flash (p.104), or use

a tripod.

Set the AF operation to One-Shot AF. Focus lock is not possible in the

AI Servo AF mode, or when servo takes effect in AI Focus AF mode

(p.97).

No images can be shot or recorded.

The card cannot be used.

The image is out of focus.

I cannot lock the focus and recompose the shot.

289

Troubleshooting Guide

Horizontal stripes (noise) or irregular exposures can be caused by

fluorescent lighting, LED lighting, or other light sources during

viewfinder or Live View shooting. Also, the exposure or color tone may

not come out right. A slow shutter speed may solve the problem.

If you use a TS-E lens and shift or tilt the lens or use an Extension

Tube, the standard exposure may not be obtained or the exposure

may be irregular.

Depending on the lens type, shutter speed, aperture, subject

conditions, brightness, etc., the continuous shooting speed may

become slower.

Under [53: Custom Functions (C.Fn)], set [5: High ISO speed

noise reduct’n] to [0: Standard], [1: Low], or [3: Disable]. If it is set to

[2: Strong], the maximum burst during continuous shooting will greatly

decrease (p.263).

During white balance bracketing, the maximum burst for continuous

shooting will decrease (p.136).

If you shoot something that has fine detail such as a field of grass, the

file size will be larger, and the actual maximum burst may be lower

than the number mentioned on page 89.

Horizontal stripes appear, or the exposure

or color tone look strange.

The standard exposure cannot be obtained or the

exposure is irregular.

The continuous shooting speed is slow.

The maximum burst during continuous shooting is lower.

Troubleshooting Guide

290

Under [53: Custom Functions (C.Fn)], if [6: Highlight tone priority]

is set to [1: Enable], ISO 100 cannot be set. If [0: Disable] is set, ISO

100 can be set (p.263). This also applies to movie shooting (p.177).

Under [53: Custom Functions (C.Fn)], if [6: Highlight tone priority]

is set to [1: Enable], the [H] ISO speed (equivalent to ISO 12800)

cannot be selected even when [2: ISO expansion] is set to [1: On]. If

[0: Disable] is set for [6: Highlight tone priority], [H] can be set

(p.263).

Under [53: Custom Functions (C.Fn)], if [6: Highlight tone priority]

is set to [1: Enable], the Auto Lighting Optimizer cannot be set. If [0:

Disable] is set, the Auto Lighting Optimizer can be set (p.263).

Set [z2: Auto Lighting Optimizer] to [Disable]. When [Low],

[Standard], or [High] is set, even if you set a decreased exposure

compensation or flash exposure compensation, the image may come

out bright (p.123).

ISO 100 cannot be set.

ISO speed [H] (equivalent to ISO 12800) cannot be set.

The Auto Lighting Optimizer cannot be set.

Even though I set a decreased exposure compensation,

the image comes out bright.

291

Troubleshooting Guide

If you shoot at night when the background is dark, the shutter speed

automatically becomes slow (slow-sync shooting) so that both the

subject and background are properly exposed. To prevent a slow

shutter speed, under [53: Custom Functions (C.Fn)], set [3: Flash

sync. speed in Av mode] to [1: 1/200-1/60sec. auto] or [2: 1/200sec.

(fixed)] (p.261).

In shooting modes (<A> <C> <2> <4> <6>) whose default

setting is <a> (built-in flash auto firing), the built-in flash will be raised

automatically when necessary.

If you use the built-in flash too often in too short a period of time, the

flash may stop firing for a while to protect the light-emitting unit.

Canon Speedlites other than the EX-series will not fire.

Under [z1: Flash control], if [Flash metering mode] in [External

flash C.Fn setting] is set to [TTL], the flash will not fire.

If flash exposure compensation is set with the external Speedlite, flash

exposure compensation cannot be set with the camera. When the

external Speedlite’s flash exposure compensation is canceled (set to

0), flash exposure compensation can be set with the camera.

When I use the <f> mode with flash, the shutter

speed becomes slow.

The built-in flash rises by itself.

The built-in flash does not fire.

The external flash does not fire.

Flash exposure compensation cannot be set for

the external Speedlite.

Troubleshooting Guide

292

Under [53: Custom Functions (C.Fn)], set [3: Flash sync. speed in

Av mode] to [0: Auto] (p.261).

A small noise may be heard when the camera’s internal mechanism

moves slightly. This is not a malfunction.

If you use flash, the shutter will make two sounds each time you shoot

(p.141).

It indicates that the camera’s internal temperature is high. If the white

<s> icon is displayed, the still photo’s image quality may deteriorate.

If the red <E> icon is displayed, it indicates that the Live View

shooting will soon stop automatically (p.157).

It indicates that the camera’s internal temperature is high. If the red

<E> icon is displayed, it indicates that the movie shooting will soon

stop automatically (p.181).

If the card’s writing speed is slow, movie shooting may stop

automatically. Use an SD Speed Class 6 “ ” or faster card. To

find out the card’s writing/reading speed, refer to the card

manufacturer’s website, etc.

If a movie clip’s file size reaches 4 GB or the shooting length reaches

29 min. 59 sec., the movie shooting will stop automatically.

High-speed sync cannot be set in the <f> mode.

The camera makes a noise when it is shaken.

The shutter makes two shooting sounds during Live View shooting.

During Live View shooting, a white <s> or red

<E> icon is displayed.

During movie shooting, a red E icon is displayed.

Movie shooting stops by itself.

293

Troubleshooting Guide

If [k1: Movie exposure] is set to [Auto], the ISO speed will be set

automatically. If [Manual] is set, you can set the ISO speed manually

(p.162).

If you change the shutter speed or aperture during movie shooting, the

changes in the exposure may be recorded.

Shooting a few test movies is recommended where you will perform

zooming during movie shooting. Zooming during movie shooting may

result in recording of changes in exposure or mechanical sound of the

lens, or images may be out of focus.

If you move the camera to the left or right quickly (high-speed panning)

or shoot a moving subject, the image may look distorted.

Flickering, horizontal stripes (noise), or irregular exposures can be

caused by fluorescent lighting, LED lighting, or other light sources

during movie shooting. Also, changes in the exposure (brightness) or

color tone may be recorded. With manual exposure, a slow shutter

speed may solve the problem.

If the camera is connected to a computer, printer, GPS receiver, TV

set, or other device with a cable, Wi-Fi cannot be set ([53: Wi-Fi/NFC]

will be grayed out). Disconnect the cable before changing any settings.

Refer to the Wireless Function Instruction Manual.

The ISO speed cannot be set for movie shooting.

The exposure changes during movie shooting.

The subject looks distorted during movie shooting.

The image flickers or horizontal stripes appear during movie shooting.

Wi-Fi

Wi-Fi cannot be set.

Troubleshooting Guide

294

In Basic Zone modes and in movie shooting mode, certain tabs and

menu options are not displayed. Set the shooting mode to a Creative

Zone mode (p.50).

Set the color space to sRGB. If Adobe RGB is set, the first character

will be an underscore (p.137).

It is a movie file (p.189).

If the card already contains recorded images, the image number may

not start from 0001 (p.188).

Check that the correct date and time are set (p.41).

Check the time zone and daylight saving time (p.41).

The shooting date and time do not appear in the picture. The date and

time are instead recorded in the image data as shooting information.

When printing, you can imprint the date and time in the picture, using

the date and time recorded in the shooting information (p.247).

If the number of images recorded on the card exceeds the number the

camera can display, [###] will be displayed (p.213).

Display Problems

The menu screen shows fewer tabs and options.

The file name’s first character is an underscore (“_”).

The file name starts with “MVI_”.

The file numbering does not start from 0001.

The shooting date and time displayed is incorrect.

The date and time are not in the picture.

[###] is displayed.

295

Troubleshooting Guide

If the LCD monitor is dirty, use a soft cloth to clean it.

In low or high temperatures, the LCD monitor display may seem slow

or may look black. It will return to normal at room temperature.

[Eye-Fi settings] will appear only when an Eye-Fi card is inserted in

the camera. If the Eye-Fi card has a write-protect switch set to the

LOCK position, you will not be able to check the card’s connection

status or disable Eye-Fi transmission (p.273).

It is the highlight alert (p.234). Overexposed areas with clipped

highlights will blink.

If the image is protected, it cannot be erased (p.228).

Movies edited with a computer cannot be played back with the

camera.

If you operate the camera’s dials or lens during movie shooting, the

operation sound will also be recorded.

The LCD monitor does not display a clear image.

[Eye-Fi settings] does not appear.

Playback Problems

Part of the image blinks in black.

The image cannot be erased.

The movie cannot be played back.

Camera operation sound can be heard when the movie

is played back.

Troubleshooting Guide

296

During autoexposure movie shooting, if there is a drastic change in the

exposure level, the recording will stop momentarily until the brightness

stabilizes. In such cases, shoot movies with manual exposure (p.162).

An HDMI cable (sold separately) is necessary to connect the camera

to a TV set. Using the HDMI Cable HTC-100 (sold separately) is

recommended (p.226).

Also check that your TV set has an HDMI IN terminal. If the TV set

does not have an HDMI IN terminal and has only an A/V IN jack, the

camera cannot be connected.

Check that the HDMI cable’s plug is inserted all the way in (p.226).

If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected

to a TV set. Set [Wi-Fi/NFC] to [Disable], then reconnect the camera

to the TV set with an HDMI cable.

Depending on the card reader and computer OS used, SDXC cards

may not be correctly recognized. In such a case, connect your camera

to the computer with the interface cable, then transfer the images to

your computer using EOS Utility (EOS software, p.314).

JPEG c and RAW images cannot be resized with the camera

(p.239).

The movie has still moments.

I cannot connect the camera to my TV set.

No picture on the TV set.

My card reader does not recognize the card.

I cannot resize the image.

297

Troubleshooting Guide

If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected

to a printer with an interface cable. Set [Wi-Fi/NFC] to [Disable], then

reconnect the camera to a printer with an interface cable.

Contents displayed on the screen vary depending on the printer. This

instruction manual lists all the printing effects available (p.246).

Install the EOS software on the computer (p.315).

If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected

to a computer. Set [Wi-Fi/NFC] to [Disable], then reconnect the

camera to a computer with an interface cable.

Printing-Related Problems

I cannot connect the camera to my printer.

There are fewer printing effects than listed

in the instruction manual.

Computer Connection Problems

I cannot download images to a computer.

298

If there is a problem with the camera, an

error message will appear. Follow the on-

screen instructions.

* If the error still persists, write down the error number and contact your

nearest Canon Service Center.

Error Codes

Number Error Message and Solution

Communications between the camera and lens is faulty. Clean the

lens contacts.

Clean the electrical contacts on the camera and lens, use a Canon

lens, or remove and install the battery again (p.25, 26, 36).

Card cannot be accessed. Reinsert/change card or format card

with camera.

Remove and insert the card again, replace the card, or format the

card (p.36, 52).

Cannot save images because card is full. Replace card.

Replace the card, erase unnecessary images, or format the card

(p.36, 230, 52).

The built-in flash could not be raised. Turn the camera off and on

again.

Operate the power switch (p.39).

10, 20

30, 40

50, 60

70, 80

An error prevented shooting. Turn the camera off and on again or

re-install the battery.

Operate the power switch, remove and install the battery again, or

use a Canon lens (p.39, 36).

Error number

Cause and countermeasures

299

•Type

Type:

Digital, single-lens reflex, AF/AE camera with built-in flash

Recording media:

SD memory card, SDHC memory card, SDXC memory card

Image sensor size: Approx. 22.3 x 14.9 mm

Compatible lenses: Canon EF lenses (including EF-S lenses)

* Excluding EF-M lenses

(35mm-equivalent angle of view is that of a lens with

approx. 1.6x the focal length indicated.)

Lens mount: Canon EF mount

• Image Sensor

Type: CMOS sensor

Effective pixels: Approx. 24.1 megapixels

* Rounded to the nearest 100,000.

Aspect ratio: 3:2

Dust delete feature: Dust Delete Data appending, Clean manually

• Recording System

Recording format: Design rule for Camera File System (DCF) 2.0

Image type: JPEG, RAW (14-bit Canon original)

RAW+JPEG Large simultaneous recording possible

Pixels recorded: L (Large) : 24 megapixels (6000 x 4000)

M (Medium) : Approx. 10.6 megapixels (3984 x 2656)

S1 (Small 1) : Approx. 5.9 megapixels (2976 x 1984)

S2 (Small 2) : Approx. 2.5 megapixels (1920 x 1280)

S3 (Small 3) : Approx. 350,000 pixels (720 x 480)

RAW : 24 megapixels (6000 x 4000)

* Rounded to the nearest 100,000. (For the S3, rounded

to the nearest 10,000.)

Create/select a folder: Possible

File numbering: Continuous, Auto reset, Manual reset

• Image Processing During Shooting

Picture Style: Auto, Standard, Portrait, Landscape, Neutral, Faithful,

Monochrome, User Def. 1 - 3

Basic+: Ambience-based shots, Light/scene-based shots

White balance: Auto (Ambience priority), Auto (White priority), Preset

(Daylight, Shade, Cloudy, Tungsten light, White

fluorescent light, Flash), Custom

White balance correction, and White balance bracketing

provided

* Flash color temperature information transmission

enabled

Specifications

300

Specifications

Noise reduction: Applicable to long exposures and high ISO speed shots

Automatic image

brightness correction:

Auto Lighting Optimizer provided

Highlight tone priority: Provided

Lens peripheral

illumination correction:

Provided

• Viewfinder

Type: Eye-level pentamirror

Field of view coverage: Vertical/Horizontal approx. 95% (with eyepoint approx.

21 mm)

Magnification: Approx. 0.8x (-1 m-1 with 50mm lens at infinity)

Eyepoint: Approx. 21 mm (from eyepiece lens center at -1 m-1)

Dioptric adjustment

range:

Approx. -2.5 - +0.5 m-1 (dpt)

Focusing screen: Fixed, Precision Matte

Mirror: Quick-return type

Depth-of-field preview: Enabled with Custom Function setting

• Autofocus (for viewfinder shooting)

Type: TTL secondary image-registration, phase-difference

detection with the dedicated AF sensor

AF points: 9-point (All AF points support f/5.6. Cross-type AF with

center AF point.)

Focusing brightness

range:

EV 0 - 18 (Center AF point)

EV 1 - 18 (Other AF points)

(With One-Shot AF, at room temperature, ISO 100)

AF operation: One-Shot AF, AI Servo AF, AI Focus AF

AF-assist beam: Small series of flashes fired by built-in flash

• Exposure Control

Metering modes: 63-zone TTL open-aperture metering

• Evaluative metering (linked to all AF points)

• Partial metering (approx. 10% of viewfinder at center)

• Center-weighted average metering

Metering brightness

range:

EV 1 - 20 (at room temperature, ISO 100)

Shooting mode: Basic Zone modes:

Scene Intelligent Auto, Flash Off, Creative Auto, Portrait,

Landscape, Close-up, Sports, Food, Night Portrait

Creative Zone modes:

Program AE, Shutter-priority AE, Aperture-priority AE,

Manual exposure

301

Specifications

ISO speed

(Recommended

exposure index):

Basic Zone modes*: ISO 100 - ISO 3200 set automatically

* Portrait: ISO 100

Creative Zone modes: ISO 100 - ISO 6400 set manually

(whole-stop increments), ISO 100 - ISO 6400 set

automatically, maximum ISO speed settable for ISO

Auto, or ISO expansion to “H” (equivalent to ISO 12800)

Exposure

compensation:

Manual: ±5 stops in 1/3- or 1/2-stop increments

AEB: ±2 stops in 1/3- or 1/2-stop increments (can be

combined with manual exposure compensation)

AE lock: Auto: Applied in One-Shot AF with evaluative

metering when focus is achieved

Manual: With AE lock button

•Shutter

Type: Electronically-controlled, focal-plane shutter

Shutter speed: 1/4000 sec. to 30 sec. (Total shutter speed range.

Available range varies by shooting mode.), Bulb, X-sync

at 1/200 sec.

•Flash

Built-in flash: Retractable, auto pop-up flash

Guide No.: Approx. 9.2/30.2 (ISO 100, in meters/feet) or

approx. 13/42.7 (ISO 200, in meters/feet)

Flash coverage: Approx. 17mm lens angle of view

Recharge time: Approx. 2 sec.

External Speedlite: Compatible with EX-series Speedlites

Flash metering: E-TTL II autoflash

Flash exposure

compensation:

±2 stops in 1/3- or 1/2-stop increments

FE lock: Provided

PC terminal: Not provided

• Drive System

Drive mode: Single shooting, Continuous shooting, Self-timer with 10-

sec. or 2-sec. delay and 10-sec. delay with continuous

shooting

Continuous shooting

speed:

Max. approx. 3.0 shots/sec.

Max. burst (Approx.): JPEG Large/Fine: 150 shots

RAW: 11 shots

RAW+JPEG Large/Fine: 6 shots

* Figures are based on Canon’s testing standards (ISO

100 and Standard Picture Style) using an 8 GB card.

302

Specifications

• Live View Shooting

Aspect ratio: 3:2, 4:3, 16:9, 1:1

Focus method: Contrast detection (FlexiZone-Single, Face detection

Live mode), Phase-difference detection (Quick mode)

Manual focus (approx. 5x / 10x magnification possible)

Focusing brightness range:

EV 1 - 18 (at room temperature, ISO 100)

Metering mode: Real-time metering with image sensor

Metering brightness

range:

EV 0 - 20 (at room temperature, ISO 100)

Grid display: Two types

• Movie Shooting

Recording format: MOV

Movie: MPEG-4 AVC/H.264

Variable (average) bit rate

Audio: Linear PCM

Recording size and

frame rate:

1920x1080 (Full HD): 30p/25p/24p

1280x720 (HD) : 60p/50p

640x480 (VGA) : 30p/25p

* 30p: 29.97 fps, 25p: 25.00 fps, 24p: 23.98 fps,

60p: 59.94 fps, 50p: 50.00 fps

Bit rate: 1920x1080 (30p/25p/24p): Approx. 46 Mbps

1280x720 (60p/50p) : Approx. 46 Mbps

640x480 (30p/25p) : Approx. 11 Mbps

Focus method: Same as focusing with Live View shooting

Focusing brightness range:

EV 1 - 18 (at room temperature, ISO 100)

Metering mode: Center-weighted average and evaluative metering with

the image sensor

* Automatically set by the focus method.

Metering brightness

range:

EV 0 - 20 (at room temperature, ISO 100)

Exposure control: Autoexposure and manual exposure

Exposure compensation:

±3 stops in 1/3-stop increments

ISO speed

(Recommended

exposure index):

With autoexposure shooting:

ISO 100 - ISO 6400 set automatically

With manual exposure:

ISO 100 - ISO 6400 set automatically/manually

Video snapshots: Settable to 2 sec./4 sec./8 sec.

Sound recording: Built-in monaural microphone

Sound-recording level adjustable, wind filter provided

Grid display: Two types

Still photo shooting: Not possible during movie shooting

303

Specifications

•LCD Monitor

Type: TFT color liquid-crystal monitor

Monitor size and dots: Approx. 7.5 cm (3.0 in.) (4:3) with approx. 920,000 dots

Brightness adjustment: Manual (7 levels)

Interface languages: 25

Feature guide: Displayable

•Playback

Image display format: Basic info, basic info + image quality/playback number,

shooting info. display, histogram, index display (4/9)

Zoom magnification: Approx. 1.5x - 10x

Highlight alert: Overexposed highlights blink

Image browsing

method:

Single image, jump by 10 or 100 images, by shooting

date, by folder, by movies, by stills, by rating

Image rotation: Possible

Ratings: Provided

Movie playback: Enabled (LCD monitor, HDMI)

Built-in speaker

Image protection: Possible

Slide show: All images, by date, by folder, by movies, by stills, by

rating

Five transition effects selectable

Background music: Selectable for slide shows and movie playback

• Post-Processing of Images

Creative filters: Grainy B/W, Soft focus, Fish-eye effect, Toy camera

effect, Miniature effect

Resize: Possible

• Direct Printing

Compatible printers: PictBridge-compatible printers

Printable images: JPEG and RAW images

Print ordering: DPOF Version 1.1 compatible

• Customization Features

Custom Functions: 11

My Menu registration: Possible

304

Specifications

• Interface

Digital terminal: Hi-Speed USB equivalent: Computer communication,

Direct printing, GPS Receiver GP-E2, Connect Station

CS100 connection

HDMI mini OUT

terminal:

Type C (Auto switching of resolution)

Remote control terminal:For Remote Switch RS-60E3

Eye-Fi card: Compatible

•Power

Battery: Battery Pack LP-E10 (Quantity 1)

* AC power can be supplied via household power outlet

accessories.

Number of possible

shots:

(Based on CIPA testing

standards, with 50%

flash use)

With viewfinder shooting:

Approx. 500 shots at room temperature (23°C/73°F),

approx. 410 shots at low temperatures (0°C/32°F)

With Live View shooting:

Approx. 240 shots at room temperature (23°C/73°F),

approx. 230 shots at low temperatures (0°C/32°F)

* With a fully-charged Battery Pack LP-E10.

Movie shooting time: Approx. 1 hr. 30 min. at room temperature (23°C/73°F)

Approx. 1 hr. 25 min. at low temperatures (0°C/32°F)

* With a fully-charged Battery Pack LP-E10.

• Dimensions and Weight

Dimensions (W x H x D):Approx. 129.0 x 101.3 x 77.6 mm / 5.08 x 3.99 x 3.06 in.

Weight: Approx. 475 g / 16.75 oz. (Including battery and card),

Approx. 427 g / 15.06 oz. (Body only)

• Operation Environment

Working temperature

range:

0°C - 40°C / 32°F - 104°F

Working humidity: 85% or less

All the data above is based on Canon’s testing standards and CIPA (Camera &

Imaging Products Association) testing standards and guidelines.

Dimensions and weight listed above are based on CIPA Guidelines (except

weight for camera body only).

Product specifications and the exterior are subject to change without notice.

If a problem occurs with a non-Canon lens attached to the camera, consult the

respective lens manufacturer.

305

Trademarks

Adobe is a trademark of Adobe Systems Incorporated.

Microsoft and Windows are trademarks or registered trademarks of Microsoft

Corporation in the United States and/or other countries.

Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and

other countries.

SDXC logo is a trademark of SD-3C, LLC.

HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

All other trademarks are the property of their respective owners.

About MPEG-4 Licensing

“This product is licensed under AT&T patents for the MPEG-4 standard and may be

used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video

that was encoded only (1) for a personal and non-commercial purpose or (2) by a

video provider licensed under the AT&T patents to provide MPEG-4 compliant video.

No license is granted or implied for any other use for MPEG-4 standard.”

* Notice displayed in English as required.

306

Third party software

This product includes third party software.

expat.h

Permission is hereby granted, free of charge, to any person obtaining a

copy of this software and associated documentation files (the

"Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute,

sublicense, and/or sell copies of the Software, and to permit persons to

whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included

in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF

ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED

TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT

SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR

ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN

ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE

OR OTHER DEALINGS IN THE SOFTWARE.

307

Use of genuine Canon accessories is recommended

This product is designed to achieve excellent performance when used with

genuine Canon accessories.

Canon shall not be liable for any damage to this product and/or accidents such

as fire, etc. caused by the malfunction of non-genuine Canon accessories

(e.g., a leakage and/or explosion of a battery pack). Please note that this

warranty does not apply to repairs arising out of the malfunction of non-genuine

Canon accessories, although you may request such repairs on a chargeable

basis.

308

Only for European Union and EEA (Norway, Iceland

and Liechtenstein)

These symbols indicate that this product is not to be

disposed of with your household waste, according to the

WEEE Directive (2012/19/EU), the Battery Directive

(2006/66/EC) and/or national legislation implementing

those Directives.

If a chemical symbol is printed beneath the symbol shown above, in

accordance with the Battery Directive, this indicates that a heavy metal

(Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or

accumulator at a concentration above an applicable threshold specified in

the Battery Directive.

This product should be handed over to a designated collection point, e.g.,

on an authorized one-for-one basis when you buy a new similar product or

to an authorized collection site for recycling waste electrical and electronic

equipment (EEE) and batteries and accumulators. Improper handling of this

type of waste could have a possible impact on the environment and human

health due to potentially hazardous substances that are generally associated

with EEE. Your cooperation in the correct disposal of this product will

contribute to the effective usage of natural resources.

For more information about the recycling of this product, please contact

your local city office, waste authority, approved scheme or your household

waste disposal service or visit www.canon-europe.com/weee,

or www.canon-europe.com/battery.

309

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.

310

311

312

313

Software Start Guide /

Downloading Images to a Computer

This chapter explains the following:

Overview of the software for EOS cameras

How to download and install the software on a computer

How to download and view the Software Instruction

Manuals (PDF files)

How to download images from the camera to a computer

314

This section explains an overview of various software applications

for EOS cameras. Internet connection is required to download and

install the software. Download and installation are not possible in

environments with no Internet connection.

EOS Utility

With the camera connected to a computer, EOS Utility enables you to

transfer still photos and movies shot with the camera to the computer.

You can also use this software to set various camera settings and shoot

remotely from the computer connected to the camera. Also, you can

copy background music tracks, such as EOS Sample Music*, to the

card.

* You can use the background music as the soundtrack for a video snapshot

album, movie, or slide show played back with your camera.

Digital Photo Professional

This software is recommended for users who shoot RAW images. You

can view, edit, and print RAW and JPEG images.

* Some functions differ between the version to be installed on a 64-bit computer

and that to be installed on a 32-bit computer.

Picture Style Editor

You can edit Picture Styles, and create and save original Picture Style

files. This software is aimed at advanced users who are experienced in

processing images.

Software Start Guide

Software Overview

315

Software Start Guide

1Download the software.

Connect to the Internet from a computer and access the following

Canon website.

www.canon.com/icpd

Select your country or region of residence and download the

software.

Decompress it on the computer.

For Windows: Click the displayed installer file to start the

installer.

For Macintosh: A dmg file will be created and displayed. Follow

the steps below to start the installer.

(1) Double-click the dmg file.

A drive icon and installer file will appear on the desktop.

If the installer file does not appear, double-click the drive

icon to display it.

(2) Double-click the installer file.

The installer starts.

2Follow the on-screen instructions to install.

Downloading and Installing the Software

Do not connect the camera to your computer before you install the

software. Otherwise, the software will not be installed properly.

Even if a previous version of the software is installed on your computer,

follow the procedure below to install the latest version. (The previous

version will be overwritten.)

316

Internet connection is required to download the Software Instruction

Manuals (PDF files). Download is not possible in environments with no

Internet connection.

1Download the Software Instruction Manuals (PDF files).

Connect to the Internet and access the following Canon website.

www.canon.com/icpd

Select your country or region of residence and download the

Instruction Manuals.

2View the Software Instruction Manuals (PDF files).

Double-click a downloaded Instruction Manual (PDF file) to open

it.

To view the Instruction Manuals (PDF files), Adobe Acrobat

Reader DC or other Adobe PDF viewer (most recent version

recommended) is required.

Adobe Acrobat Reader DC can be downloaded free from the

Internet.

To learn how to use a PDF viewer, refer to its Help section.

Downloading and Viewing the Software

Instruction Manuals (PDF Files)

317

You can use the EOS software to download the images in the camera to

a computer. There are two ways to do this.

1Install the software (p.315).

2Use an interface cable (sold

separately) to connect the camera

to the computer.

Connect the cable to the camera’s

digital terminal with the cable plug’s

<D> icon facing the front of the

camera.

Connect the cord’s plug to the

computer’s USB terminal.

3Use EOS Utility to download the

images.

Refer to the EOS Utility Instruction

Manual.

Downloading Images to a Computer

Downloading by Connecting the Camera to the Computer

If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected to a

computer. Set [Wi-Fi/NFC] to [Disable], then reconnect the camera to a

computer with an interface cable.

Downloading Images to a Computer

318

You can also use a card reader to download images to a computer.

1Install the software (p.315).

2Insert the card into the card

reader.

3Use Digital Photo Professional to

download the images.

Refer to the Digital Photo

Professional Instruction Manual.

Downloading Images with a Card Reader

When downloading images from the camera to a computer with a card

reader without using EOS software, copy the DCIM folder on the card to the

computer.

319

Index

Numerics

10- or 2-sec. self-timer ..................103

1280x720 (movie) .........................168

1920x1080 (movie) .......................168

640x480 (movie) ...........................168

9-point AF auto selection ................99

A (Scene Intelligent Auto)............58

Access lamp....................................38

Accessories.......................................3

Adobe RGB...................................137

AE lock..........................................120

AEB

(Auto exposure bracketing)...118, 260

AF 9 Focusing

AI FOCUS (AI Focus AF)................98

AI SERVO (AI Servo AF) ................98

Ambience-based shots ...................76

Angle of view...................................45

Aperture-priority AE ......................110

Aspect ratio...................................146

Auto Lighting Optimizer...........57, 123

Auto playback ...............................222

Auto power off.........................39, 185

Auto reset......................................189

Auto rotate vertical images ...........192

Autofocus ..................................97, 99

Automatic selection (AF point)........99

Av (Aperture-priority AE) ...............110

B/W (Monochrome).................96, 128

Background music ........................225

Basic Zone modes ..........................30

Battery.................................34, 36, 40

Beep (Beeper)...............................184

Black-and-white images ... 76, 96, 128

Bracketing ............................ 118, 136

Brightness (exposure) .................. 116

Auto exposure bracketing

(AEB) ............................... 118, 260

Autoexposure lock (AE lock).... 120

Exposure compensation .......... 116

Measurement method

(metering mode)....................... 115

Built-in flash.................................. 104

Function settings...................... 199

BULB (bulb exposure) .................. 114

C (Creative Auto) ......................... 64

Cable .................... 226, 242, 279, 317

Camera

Clearing the settings to default

... 194

Holding the camera.................... 46

Settings display........................ 193

Camera shake ................................ 46

Cards.................................. 25, 36, 52

Card reminder .......................... 184

Formatting.................................. 52

Low-level formatting................... 53

SD speed class ............................ 5

Troubleshooting ................... 38, 53

Write protection .......................... 36

Center-weighted average

metering ....................................... 115

Charger .................................... 31, 34

Checking depth of field................. 112

Cleaning (image sensor) .............. 204

Clearing the camera settings

to default....................................... 194

Clipped highlights ......................... 234

Close-ups ....................................... 69

Color saturation ............................ 127

Color space

(color reproduction range) ............ 137

320

Index

Color temperature.........................131

Color tone ............................... 71, 127

Continuous file numbering ............188

Continuous shooting .....................102

Contrast ........................................ 127

Creative Auto .................................. 64

Creative filters............................... 236

M (Creative Zone) icon....................8

Creative Zone modes .....................30

Custom Functions......................... 258

Custom white balance ..................133

Date/time ........................................41

Daylight saving time........................42

DC Coupler ...................................270

Depth-of-field preview...................112

Dial..........................................26, 107

Digital terminal ......................242, 317

Dioptric adjustment .........................46

Direct printing................................242

DPOF (Digital Print Order Format)

...251

Drive/Self-timer ..................... 102, 103

Dust Delete Data .......................... 202

Erasing images.............................230

Error codes ...................................298

Evaluative metering ......................115

Exposure compensation ...............116

Exposure level increments............260

External flash ................................ 272

Custom Functions ....................201

Eyecup.......................................... 271

Eye-Fi cards.................................. 273

Eyepiece cover .......................33, 271

Faithful ........................................... 96

FE lock ......................................... 121

Feature guide ................................. 55

FEB .............................................. 199

File extension ............................... 189

File name ..................................... 188

File size .......................... 89, 169, 232

Filter effects.................................. 128

Final image simulation ......... 143, 166

Fine (image-recording quality) ....... 28

Firmware ...................................... 283

First-curtain synchronization ........ 200

Fish-eye effect.............................. 238

Flash (Speedlite)

Built-in flash ............................. 104

Custom Functions.................... 201

Effective range......................... 105

External flash ........................... 272

FE lock..................................... 121

Flash control ............................ 198

Flash exposure compensation

... 117

Flash mode .............................. 200

Flash off ............................... 63, 75

Flash sync speed ..................... 261

Manual flash ............................ 200

Red-eye reduction ................... 106

Shutter synchronization

(1st/2nd curtain)....................... 200

Focus indicator............................... 58

Focus lock ...................................... 61

Focus mode

switch ............................. 44, 101, 156

Focusing

AF method ....................... 148, 176

AF operation .............................. 97

AF point selection ...................... 99

321

Index

AF-assist beam.................100, 264

Beeper ......................................184

Difficult subjects for AF .....101, 152

Manual focusing ...............101, 156

Out of focus ................46, 101, 152

Recomposing..............................61

Focusing point (AF point)................99

Folder creation/selection...............186

Food................................................71

Formatting (card initialization).........52

Frame rate ....................................168

Full High-Definition

(Full HD)................................168, 216

Fully automatic shooting (Scene

Intelligent Auto)...............................58

Functions settable by

shooting mode ..............................276

Grainy B/W....................................238

Grid display ...........................145, 179

HDMI.....................................216, 226

High ISO speed noise reduction ...263

High-Definition (HD) movies .........168

Highlight alert................................234

Highlight tone priority ............177, 263

Histogram (Brightness/RGB) ........234

Hot shoe..........................................26

Household power ..........................270

ICC profile .....................................137

Image dust prevention ..........202, 204

Image review time.........................184

Image Zone.....................................30

Image-recording quality ..................88

Images

Auto playback .......................... 222

Auto rotation............................. 192

Erasing..................................... 230

Highlight alert ........................... 234

Histogram................................. 234

Image characteristics

(Picture Style)............. 95, 126, 129

Index display ............................ 208

Jump display

(image browsing) ..................... 209

Magnified view ......................... 210

Manual rotation ........................ 211

Numbering ............................... 188

Playback ............................ 83, 207

Protecting................................. 228

Rating....................................... 212

Review time ............................. 184

Shooting information ................ 232

Slide show................................ 222

Viewing on a TV set ......... 216, 226

Index display ................................ 208

ISO speed ...................................... 92

Automatic setting (Auto)............. 93

ISO expansion ......................... 260

Maximum ISO speed

for ISO Auto ............................... 94

JPEG .............................................. 89

Jump display ................................ 209

Landscape................................ 68, 96

Language selection ........................ 43

Large (image-recording quality) ..... 28

LCD monitor ................................... 24

Brightness adjustment ............. 185

Image playback.................. 83, 207

Menu display ...................... 50, 280

Screen color............................. 197

Shooting function settings.... 28, 54

322

Index

Lens................................................44

Lock release ...............................45

Peripheral illumination

correction.................................. 124

Lighting/scene-based shots ............80

Live View shooting..................62, 139

Aspect ratio ..............................146

Face detection Live mode

(AF) .......................................... 149

FlexiZone - Single ....................148

Grid display ..............................145

Information display ................... 142

Manual focusing (MF).......101, 156

Metering timer .......................... 147

Possible shots ..........................141

Quick Control............................ 144

Quick mode ..............................154

Long exposure noise reduction.....262

Long exposures ............................114

M (Manual exposure)....................113

Macro photography.........................69

Magnified view......................156, 210

Manual exposure ..................113, 162

Manual focusing (MF)...........101, 156

Manual reset.................................189

Manual selection (AF point)............99

Maximum burst ......................... 89, 90

Medium (image-recording quality)

...28

Memory cards 9 Cards

Menu...............................................50

My Menu...................................267

Setting procedure .......................51

Settings .................................... 280

3 icon .........................................8

Metering mode..............................115

Metering timer....................... 147, 179

MF (manual focusing)...........101, 156

Microphone .................................. 160

Miniature effect............................. 238

Mode Dial ....................................... 30

Monochrome .................... 76, 96, 128

Movies.......................................... 159

AF method ....................... 167, 176

Autoexposure........................... 160

Editing out first and

last scenes............................... 220

Enjoying ................................... 216

File size.................................... 169

Frame rate ............................... 168

Grid display .............................. 179

Information display................... 164

Manual exposure shooting....... 162

Metering timer.......................... 179

Movie recording size................ 168

Playback .................................. 218

Quick Control ........................... 167

Recording time......................... 169

Sound recording ...................... 178

Video snapshot album ............. 170

Video snapshots ...................... 170

Viewing on a TV set ......... 216, 226

Wind filter................................. 179

My Menu ...................................... 267

Neutral............................................ 96

Night Portrait .................................. 72

Night scenes ............................ 68, 72

Noise reduction

High ISO speed ....................... 263

Long exposures ....................... 262

Nomenclature................................. 26

Normal (image-recording quality)... 28

NTSC ................................... 168, 284

323

Index

ONE SHOT (One-Shot AF).............97

P (Program AE)...............................86

PAL .......................................168, 284

Paper settings (printing)................244

Partial metering.............................115

Peripheral illumination correction

...124

Photobook set-up..........................255

PictBridge......................................241

Picture Style....................95, 126, 129

Pixel count ......................................88

Playback .................................83, 207

Portrait ......................................67, 95

Possible recording time (movie)....169

Possible shots...................40, 88, 141

Power..............................................39

Auto power off ..........................185

Battery level................................40

Household power......................270

Possible shots ..............40, 88, 141

Recharge ....................................34

Predictive (AI Servo).......................98

Pressing completely........................47

Pressing halfway.............................47

Printing..........................................241

Cropping ...................................249

Page layout...............................245

Paper settings...........................244

Photobook set-up .....................255

Print order (DPOF) ...................251

Printing effects..........................246

Tilt correction ............................249

Program AE ....................................86

Program shift...................................87

Protecting images .........................228

(Quick Control)

... 48, 74, 144, 167, 214

Quick mode .................................. 154

Rating mark .................................. 212

RAW ................................... 28, 89, 91

RAW+JPEG........................ 28, 89, 91

Recharging ..................................... 34

Red-eye reduction ........................ 106

Release shutter without card........ 184

Remote switch.............................. 271

Resizing........................................ 239

Revert to default settings.............. 194

Rotation (image)................... 192, 211

Safety Instructions.......................... 20

SD, SDHC, SDXC cards 9 Cards

Second-curtain synchronization ... 200

Self-timer ...................................... 103

Sensitivity 9 ISO speed

Sensor cleaning............................ 204

Sepia (monochrome).............. 76, 128

Sharpness .................................... 127

Shooting function settings ........ 28, 54

Shooting information display ........ 232

Shooting modes ............................. 30

Av (Aperture-priority AE).......... 110

M (Manual exposure) ............... 113

P (Program AE).......................... 86

Tv (Shutter-priority AE) ............ 108

A (Scene Intelligent Auto)....... 58

7 (Flash Off) ............................ 63

C (Creative Auto)..................... 64

324

Index

2 (Portrait) ................................67

3 (Landscape) .........................68

4 (Close-up) .............................69

5 (Sports).................................70

P (Food) .................................... 71

6 (Night Portrait) .......................72

Shutter button .................................47

Shutter synchronization

(1st/2nd curtain)............................ 200

Shutter-priority AE ........................108

Single shooting .............................277

Single-image display.......................83

Single-point AF ...............................99

Slide show ....................................222

Small (image-recording quality)......28

Soft focus......................................238

Speaker.........................................218

Sports..............................................70

sRGB ............................................137

Stop down aperture.......................266

Strap ...............................................33

System map..................................278

Temperature warning ............157, 181

Time zone .......................................41

Tone priority ..........................177, 263

Toning effect (monochrome) .........128

Toy camera effect .........................238

Tripod socket ..................................27

Troubleshooting ............................ 286

Tv (Shutter-priority AE) .................108

USB (digital) terminal............ 242, 317

Video snapshot album.................. 170

Video snapshots........................... 170

Video system........................ 168, 179

Viewfinder ...................................... 29

Dioptric adjustment .................... 46

Viewing on a TV set ............. 216, 226

Volume (movie playback) ............. 219

White balance (WB) ..................... 131

Ambience priority (Q)............ 132

Bracketing................................ 136

Correction ................................ 135

Custom .................................... 133

White priority (Qw)................ 132

Wi-Fi/NFC .................................... 283

Wind filter ..................................... 179

CANON INC.

30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

Europe, Africa & Middle East

CANON EUROPA N.V.

Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands

For your local Canon office, please refer to your warranty card or to www.canon-europe.com/Support

The product and associated warranty are provided in European countries by Canon Europa N.V.

The descriptions in this Instruction Manual are current as of December 2017.

For information on the compatibility with any products introduced after this date,

contact any Canon Service Center. For the latest version Instruction Manual,

refer to the Canon website.

Table of Contents

Canon EOS 2000D 18-55 DC + SB130 + 16GB User Manual

Related Manuals

Canon EOS 200D + 18-55 DC III + 100EG + SD 16GB Manual

Canon EOS 2000D + 18-55 IS Kit Manual

Canon EOS 2000D + 18-55 IS Kit Manual

Canon EOS 2000D + 18-55 IS Kit Manual

Trust 18552 Manual

Canon 2000D + EF-S 18-55 IS II + EF 50mm Manual