Table of Contents
- Cover
- Introduction
- Getting Started and Basic Camera Operations
- Charging the Battery
- Installing and Removing the Battery and Card
- Using the LCD Monitor
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Shooting Operations
- Setting the Screen Display Level
- Quick Control for Shooting Functions
- Menu Operations and Configurations
- Operating the Camera with Touch Screen
- Formatting the Card
- Switching the LCD Monitor Display
- Basic Shooting and Image Playback
- Fully Automatic Shooting (Scene Intelligent Auto)
- Full Auto Techniques (Scene Intelligent Auto)
- Shooting When You Cannot Use Flash
- Creative Auto Shooting
- Special Scene Mode
- Shooting Portraits
- Shooting Group Photos
- Shooting Landscapes
- Shooting Moving Subjects
- Photographing Children
- Shooting Close-ups
- Shooting Food
- Shooting Candlelight Portraits
- Shooting Night Portraits (With a Tripod)
- Shooting Night Scenes (Handheld)
- Shooting Backlit Scenes
- Shooting with Creative Filter Effects
- Quick Control
- Adjusting the Brightness
- Image Playback
- Setting the AF and Drive Modes
- Image Settings
- Setting the Image-Recording Quality
- Setting the ISO Speed for Still Photos
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Matching the Light Source
- Adjusting the Color Tone for the Light Source
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Correction of Lens Aberrations due to Optical Characteristics
- Setting the Color Reproduction Range
- Advanced Operations for Photographic Effects
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Handy Features
- Image Playback
- Searching for Images Quickly
- Magnifying Images
- Playing Back with the Touch Screen
- Rotating the Image
- Setting Ratings
- Filtering Images for Playback
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Protecting Images
- Erasing Images
- Digital Print Order Format (DPOF)
- Specifying Images for a Photobook
- Shooting Information Display
- Post-Processing Images
- Customizing the Camera
- Reference
- Software Start Guide / Downloading Images to a Computer
Canon EOS 200D + 18-55 DC III + 100EG + SD 16GB User Manual
Displayed below is the user manual for EOS 200D + 18-55 DC III + 100EG + SD 16GB by Canon which is a product in the Digital Cameras category. This manual has pages.
Related Manuals
2
The EOS REBEL SL2 or EOS 200D is a digital single-lens reflex camera
featuring a fine-detail CMOS sensor with approx. 24.2 effective
megapixels, DIGIC 7, high-precision and high-speed 9-point AF,
maximum continuous shooting speed of approx. 5.0 shots/sec., Live
View shooting, Full High-Definition (Full HD) movie shooting, and Wi-Fi/
NFC/Bluetooth (wireless communication) function.
Before Starting to Shoot, Be Sure to Read the Following
To avoid botched pictures and accidents, first read the “Safety
Precautions” (p.22-24) and “Handling Precautions” (p.25-27). Also, read
this manual carefully to ensure that you use the camera correctly.
Refer to This Manual while Using the Camera to Further
Familiarize Yourself with the Camera
While reading this manual, take a few test shots and see how they
come out. You can then better understand the camera. Be sure to store
this manual safely, too, so that you can refer to it again when necessary.
Testing the Camera Before Use and Liability
After shooting, play images back and check whether they have been
properly recorded. If the camera or memory card is faulty and the
images cannot be recorded or downloaded to a computer, Canon
cannot be held liable for any loss or inconvenience caused.
Copyrights
Copyright laws in your country may prohibit the use of your recorded
images or copyrighted music and images with music on the memory
card for anything other than private enjoyment. Also be aware that
certain public performances, exhibitions, etc. may prohibit photography
even for private enjoyment.
Introduction
3
Before starting, check that all the following items are included with your
camera. If anything is missing, contact your dealer.
* Battery Charger LC-E17 or LC-E17E is provided. (The LC-E17E comes with a
power cord.)
The camera does not come with the Software CD-ROM, an interface cable
or HDMI cable.
The Instruction Manuals are listed on the next page.
If you purchased a Lens Kit, check that the lenses are included.
Be careful not to lose any of the above items.
For items sold separately, see the System Map (p.400).
Item Check List
Battery Pack
LP-E17
(with protective cover)
Battery Charger
LC-E17/LC-E17E*
Strap
Camera
(with eyecup and body cap)
When you need Lens Instruction Manuals, download them from the Canon
Web site (p.4).
The Lens Instruction Manuals (PDF files) are for lenses sold individually.
Note that when purchasing the Lens Kit, some of the accessories included
with the lens may not match those listed in the Lens Instruction Manual.
Software can be downloaded from the Canon Web site (p.445).
4
Camera and Wi-Fi (Wireless Communication) Function
Basic Instruction Manual
The booklet is the Basic Instruction Manual.
More detailed Instruction Manuals (PDF files) can be
downloaded from the Canon Web site.
1Download the Instruction Manuals (PDF files).
Connect to the Internet and access the following Canon Web site.
www.canon.com/icpd
Select your country or region of residence and download the
Instruction Manuals.
Instruction Manuals Available for Download
• Camera Instruction Manual
• Wi-Fi (Wireless Communication) Function Instruction
Manual
• Camera and Wi-Fi (Wireless Communication) Function
Basic Instruction Manual
• Lens Instruction Manuals
• Software Instruction Manuals
2View the Instruction Manuals (PDF files).
Double-click the downloaded Instruction Manual (PDF file) to
open it.
To view the Instruction Manuals (PDF files), an Adobe PDF
viewing software such as Adobe Acrobat Reader DC (most recent
version recommended) is required.
Adobe Acrobat Reader DC can be downloaded for free from the
Internet.
To learn how to use PDF viewing software, refer to the software’s
Help section, etc.
Instruction Manuals
Downloading and Viewing the Instruction Manuals (PDF Files)
5
Instruction Manuals
The Instruction Manuals (PDF files) can also be downloaded using the QR
code.
www.canon.com/icpd
A software application is required to read the QR code.
Select your country or region of residence, then download the Instruction
Manuals.
The QR code can also be displayed under [54: Manual/software URL].
6
Quick Start Guide
1Insert the battery (p.38).
Upon purchase, charge the battery
to start using (p.36).
2Insert the card (p.38).
With the card’s label facing toward
the back of the camera, insert it into
the card slot.
3Attach the lens (p.48).
Align the lens’s white or red mount
index with the camera’s mount
index of the same color to attach
the lens.
4Set the lens’s focus mode
switch to <f> (p.48).
5Set the power switch to <1>,
then set the Mode Dial to <A>
(Scene Intelligent Auto) (p.72).
All the necessary camera settings
will be set automatically.
White index Red index
7
Quick Start Guide
6Flip out the LCD monitor (p.41).
When the LCD monitor displays the
date/time/zone setting screen, see
page 44.
7Focus on the subject (p.51).
Look through the viewfinder and
aim the viewfinder center over the
subject.
Press the shutter button halfway,
and the camera will focus on the
subject.
The built-in flash will be raised as
necessary.
8Take the picture (p.51).
Press the shutter button completely
to take the picture.
9Review the picture.
The image just captured will be
displayed for approx. 2 sec. on the
LCD monitor.
To display the image again, press
the <x> button (p.110).
To shoot while looking at the LCD monitor, see “Live View
Shooting” (p.195).
To view the images captured so far, see “Image Playback” (p.110).
To delete images, see “Erasing Images” (p.339).
8
The following cards can be used with the camera regardless of
capacity. If the card is new or was previously formatted (initialized)
by another camera or computer, format the card with this camera
(p.68).
SD/SDHC*/SDXC* memory cards
* UHS-I cards supported.
When shooting movies, use a large-capacity card with a writing/reading
speed class at least as high as shown in the following table.
* Image-recording quality that is automatically set for time-lapse movie shooting
(p.254).
If you use a slow-writing card when shooting movies, the movie may
not be recorded properly. Also, if you play back a movie on a card
with a slow reading speed, the movie may not be played back
properly.
To check the card’s writing/reading speed, refer to the card
manufacturer’s Web site.
Compatible Cards
Cards that Can Record Movies
Movie Recording Size
(p.245)
Recording Formats
MOV MP4
ALL-I*UHS Speed Class 3 or
faster -
IPB
(Standard)
L: 8 7-SD Speed Class 10 or
faster
Other than
above -SD Speed Class 6 or
faster
IPB (Light) -SD Speed Class 4 or
faster
In this manual, “card” refers to SD memory cards, SDHC memory
cards, and SDXC memory cards.
*The camera does not come with a card for recording photos/
movies. Please purchase it separately.
9
Chapters
Introduction 2
Getting Started and Basic Camera Operations 35
Basic Shooting and Image Playback 71
Setting the AF and Drive Modes 113
Image Settings 127
Advanced Operations for Photographic Effects 161
Flash Photography 181
Shooting with the LCD Monitor
(Live View Shooting) 195
Shooting Movies 233
Handy Features 281
Image Playback 309
Post-Processing Images 355
Customizing the Camera 363
Reference 379
Software Start Guide /
Downloading Images to a Computer 443
1
2
3
4
5
6
7
8
9
1
0
11
1
2
13
14
10
Contents by Purpose
Shooting
Shoot automatically Î p.71-109 (Basic Zone modes)
Shoot continuously Î p.123 (i Continuous shooting)
Take a picture of yourself in a group
Î p.125 (j Self-timer)
Freeze the action Î p.164 (s Shutter-priority AE)
Blur the action
Blur the background Î p.78 (C Creative Auto)
Keep the background in sharp focus
p.166 (f Aperture-priority AE)
Adjust the image brightness
(exposure) Î p.174 (Exposure compensation)
Shoot in low light Î p.72, 182 (D Flash photography)
p.132 (ISO speed setting)
Shoot without flash Î p.77 (7 Flash Off)
p.107 (b Flash off)
Shoot fireworks at night Î p.171 (Bulb exposure)
Shoot while viewing the LCD monitor
Î p.195 (A Live View shooting)
Shoot with creative effects Î p.100, 205 (Creative filters)
Take a Self Portrait Î p.226 ( Selfie)
Shoot movies Î p.233 (k Movie shooting)
11
Image Quality
Shoot with image effects
matching the subject Î p.135 (Picture Style)
Make a large-size print of the picture
Î p.128 (73, 83, 1)
Take a lot of pictures Î p.128 (7a, 8a, b)
AF (Focusing)
Change the point of focus Î p.119 (S AF point selection)
Shoot a moving subject Î p.90, 91, 116 (AI Servo AF)
Playback
View the images on the camera Î p.110 (x Playback)
Search for pictures quickly Î p.310 (H Index display)
p.311 (I Image browsing)
Rate images Î p.317 (Ratings)
Prevent important images Î p.336 (K Image protect)
from accidental erasure
Delete unnecessary images Î p.339 (L Delete)
Auto play back photos and movies
Î p.330 (Slide show)
View the photos and movies on a TV set
Î p.333 (TV set)
Adjust the LCD monitor brightness
Î p.289 (LCD monitor brightness)
Apply special effect to images Î p.356 (Creative filters)
12
Power
Battery
• Charging Î p.36
• Installing/Removing Î p.38
• Battery level Î p.43
• Checking battery
information Î p.380
Household power outlet Î p.381
Auto power off Î p.42
Cards
Installing/Removing Î p.38
Formatting Î p.68
Releasing shutter
without card Î p.287
Lens
Attaching/Detaching Î p.48
Zoom Î p.49
Basic Settings
Dioptric adjustment Î p.50
Language Î p.47
Date/Time/Zone Î p.44
Beeper Î p.287
LCD monitor
Using the LCD monitor Î p.41
LCD off/on button Î p.301
Brightness adjustment Î p.289
Touch screen Î p.65
Display level settings Î p.52
Feature guide Î p.56
Recording Images
Creating/Selecting
a folder Î p.290
File numbering Î p.292
AF
AF operation Î p.114
AF point selection Î p.119
Manual focusing Î p.122
Drive
Drive mode Î p.123
Continuous shooting Î p.123
Self-timer Î p.125
Maximum burst Î p.129
Image Quality
Image-recording quality Î p.128
Picture Style Î p.135
White balance Î p.143
Auto Lighting Optimizer Î p.149
Noise reduction for long
exposures Î p.151
Noise reduction for
high ISO speeds Î p.150
Lens aberration
correction Î p.153
Highlight tone priority Î p.367
Color space Î p.159
Index to Features
13
Index to Features
Shooting
Shooting mode Î p.30
ISO speed Î p.132
Bulb Î p.171
Metering mode Î p.172
Mirror lockup Î p.179
Remote control Î p.382
Exposure Adjustment
Exposure compensation Î p.174
Exposure compensation
with M+ISO Auto Î p.170
AEB Î p.176
AE lock Î p.178
Flash
Built-in flash Î p.182
External flash Î p.187
Flash function settings Î p.189
Live View Shooting
Live View shooting Î p.195
Aspect ratio Î p.210
AF operation Î p.211
AF method Î p.214
Creative filters Î p.205
Touch Shutter Î p.224
Self portrait Î p.226
Movie Shooting
Movie shooting Î p.233
AF method Î p.214
Movie recording size Î p.245
Movie Servo AF Î p.273
Sound recording Î p.271
Manual exposure Î p.238
Digital zoom Î p.248
HDR movie shooting Î p.249
Creative filters for movies
Î p.250
Video snapshot Î p.261
Time-lapse movie Î p.254
Remote control shooting Î p.382
Playback
Image review time Î p.288
Single-image display Î p.110
Shooting information Î p.349
Index display Î p.310
Image browsing
(Jump display) Î p.311
Magnified view Î p.313
Image rotation Î p.316
Rating Î p.317
Movie playback Î p.326
Slide show Î p.330
Viewing images on a TV set
Î p.333
Protect Î p.336
Erasing Î p.339
Touch playback Î p.314
Print Order (DPOF) Î p.342
Photobook Set-up Î p.346
15
Icons in this Manual
<6> : Indicates the Main Dial.
<W><X><Y><Z> : Indicate up, down, left, and right on the <V>
cross keys respectively.
<0> : Indicates the Setting button.
0/9/7/8: Indicates that each function remains active
for approx. 4 sec., 6 sec., 10 sec., or 16 sec.
after you let go of the button.
* In addition to the above, the icons and symbols used on the camera’s buttons
and displayed on the LCD monitor are also used in this manual when discussing
relevant operations and functionality.
3: Indicates a function that can be changed by pressing the
<M> button to change its settings.
O: This icon at the upper right of the page titles indicates that
the function is available only in the Creative Zone modes
(p.31).
(p.**) : Reference page numbers for more information.
: Warning to prevent shooting problems.
: Supplemental information.
: Tips or advice for better shooting.
: Troubleshooting advice.
Basic Assumptions for Operational Instructions and Notes
on Sample Photos
All operations described in this manual assume that the power switch
is set to <1> (p.42).
It is assumed that all the menu settings and Custom Functions are
set to their defaults.
The illustrations in this manual describe the camera attached with the
EF-S18-55mm f/4-5.6 IS STM lens as an example.
The sample photos displayed on the camera and used in this manual
are only for illustrative purposes to show the effects more clearly.
Conventions Used in this Manual
16
1
Introduction 2
Item Check List................................................................................. 3
Instruction Manuals .......................................................................... 4
Quick Start Guide ............................................................................. 6
Compatible Cards............................................................................. 8
Chapters........................................................................................... 9
Contents by Purpose...................................................................... 10
Index to Features ........................................................................... 12
Conventions Used in this Manual................................................... 15
Safety Precautions ......................................................................... 22
Handling Precautions ..................................................................... 25
Nomenclature ................................................................................. 28
Getting Started and Basic Camera Operations 35
Charging the Battery ...................................................................... 36
Installing and Removing the Battery and Card............................... 38
Using the LCD Monitor ................................................................... 41
Turning on the Power ..................................................................... 42
Setting the Date, Time, and Zone................................................... 44
Selecting the Interface Language................................................... 47
Attaching and Detaching a Lens..................................................... 48
Basic Shooting Operations............................................................. 50
Setting the Screen Display Level ................................................... 52
Q Quick Control for Shooting Functions ....................................... 58
3 Menu Operations and Configurations................................... 60
d Operating the Camera with Touch Screen ................................. 65
Formatting the Card ....................................................................... 68
Switching the LCD Monitor Display ................................................ 70
Contents
17
Contents
2
3
Basic Shooting and Image Playback 71
A Fully Automatic Shooting (Scene Intelligent Auto) ...................72
A Full Auto Techniques (Scene Intelligent Auto)..........................75
7 Shooting When You Cannot Use Flash .................................... 77
C Creative Auto Shooting.............................................................78
8: Special Scene Mode ............................................................. 85
2 Shooting Portraits ......................................................................87
q Shooting Group Photos ............................................................. 88
3 Shooting Landscapes ...............................................................89
5 Shooting Moving Subjects ........................................................90
C Photographing Children .............................................................91
4 Shooting Close-ups....................................................................92
P Shooting Food ............................................................................ 93
x Shooting Candlelight Portraits ................................................... 94
6 Shooting Night Portraits (With a Tripod) ....................................95
F Shooting Night Scenes (Handheld)............................................96
G Shooting Backlit Scenes............................................................97
v Shooting with Creative Filter Effects ....................................... 100
Q Quick Control...........................................................................106
Adjusting the Brightness ...............................................................109
x Image Playback ...................................................................... 110
Setting the AF and Drive Modes 113
f: Changing the Autofocus Operation (AF operation) ............... 114
S Selecting the AF Point ............................................................ 119
Subjects Difficult to Focus on........................................................121
MF: Manual Focus .....................................................................122
i Selecting the Drive Mode........................................................123
j Using the Self-timer ................................................................. 125
Contents
18
6
5
4Image Settings 127
Setting the Image-Recording Quality ........................................... 128
g: Setting the ISO Speed for Still Photos................................. 132
A Selecting a Picture Style ...................................................... 135
A Customizing a Picture Style ................................................. 138
A Registering a Picture Style ................................................... 141
B: Matching the Light Source (White balance)......................... 143
u Adjusting the Color Tone for the Light Source......................... 147
Auto Correction of Brightness and Contrast (Auto Lighting Optimizer)
.. 149
Setting Noise Reduction............................................................... 150
Correction of Lens Aberrations due to Optical Characteristics..... 153
Setting the Color Reproduction Range (Color space) .................. 159
Advanced Operations for Photographic Effects 161
d: Program AE ............................................................................ 162
s: Conveying the Subject’s Movement (Shutter priority AE)..... 164
f: Changing the Depth of Field (Aperture priority AE).............. 166
Depth-of-Field Preview .............................................................. 168
a: Manual Exposure ................................................................... 169
q Changing the Metering Mode ................................................. 172
Setting the Desired Exposure Compensation
............................... 174
Auto Exposure Bracketing (AEB) ................................................. 176
A Locking the Exposure (AE Lock)............................................. 178
Mirror Lockup to Reduce Camera Vibration Blur.......................... 179
Flash Photography 181
D Using the Built-in Flash............................................................. 182
D Using an External Speedlite ..................................................... 187
Setting the Flash Function............................................................ 189
19
Contents
8
7
9
Shooting with the LCD Monitor (Live View Shooting) 195
A Shooting with the LCD Monitor............................................... 196
Shooting Function Settings ...........................................................203
U Shooting with Creative Filter Effects .......................................205
Menu Function Settings ................................................................209
Changing the Autofocus Operation (AF operation)....................... 211
Focusing with AF (AF method) .....................................................214
x Shooting with the Touch Shutter .............................................224
g Taking a Self Portrait...............................................................226
MF: Focusing Manually.................................................................228
Shooting Movies 233
k Shooting Movies .....................................................................234
Autoexposure Shooting..............................................................234
Manual Exposure Shooting ........................................................238
Shooting Function Settings ...........................................................244
Setting the Movie Recording Size.................................................245
Using Movie Digital Zoom .............................................................248
u Shooting HDR Movies .............................................................249
v Shooting Movies with Creative Filter Effects ...........................250
N Shooting Time-lapse Movies.................................................254
Shooting Video Snapshots............................................................261
Menu Function Settings ................................................................271
Handy Features 281
Geotagging Images....................................................................... 282
Handy Features ............................................................................287
Disabling the Beeper..................................................................287
Card Reminder...........................................................................287
Setting the Image Review Time .................................................288
Contents
20
10
Setting the Auto Power Off Time ............................................... 288
Adjusting the LCD Monitor Brightness....................................... 289
Creating and Selecting a Folder ................................................ 290
File Numbering Methods............................................................ 292
Setting the Copyright Information .............................................. 295
Setting the Auto Rotation of Vertical Images ............................. 297
Reverting the Camera to the Default Settings ........................... 298
Turning the LCD Monitor Off/On ................................................ 301
f Automatic Sensor Cleaning .................................................. 302
Appending Dust Delete Data........................................................ 304
Manual Sensor Cleaning .............................................................. 306
Image Playback 309
x Searching for Images Quickly ................................................ 310
u/y Magnifying Images ............................................................. 313
d Playing Back with the Touch Screen ........................................ 314
b Rotating the Image.................................................................. 316
Setting Ratings ............................................................................. 317
Filtering Images for Playback....................................................... 320
Q Quick Control for Playback ..................................................... 322
k Enjoying Movies ..................................................................... 324
k Playing Back Movies .............................................................. 326
X Editing a Movie’s First and Last Scenes ................................. 328
Slide Show (Auto Playback) ......................................................... 330
Viewing Images on a TV Set ........................................................ 333
K Protecting Images................................................................... 336
L Erasing Images........................................................................ 339
W Digital Print Order Format (DPOF) ......................................... 342
p Specifying Images for a Photobook ......................................... 346
B: Shooting Information Display ............................................ 349
21
Contents
11
14
13
12
Post-Processing Images 355
U Applying Creative Filter Effects ...............................................356
S Resizing JPEG Images ...........................................................359
N Cropping JPEG Images...........................................................361
Customizing the Camera 363
Setting Custom Functions.............................................................364
Custom Function Setting Items.....................................................366
C.Fn I: Exposure ........................................................................366
C.Fn II: Image ............................................................................ 367
C.Fn III: Autofocus/Drive ............................................................368
C.Fn IV: Operation/Others..........................................................369
Registering My Menu....................................................................373
Reference 379
Checking the Battery Information..................................................380
Using a Household Power Outlet.................................................. 381
Remote Control Shooting..............................................................382
H Using Eye-Fi Cards .................................................................387
Function Availability Table by Shooting Mode...............................390
System Map .................................................................................. 400
Menu Settings...............................................................................402
Troubleshooting Guide..................................................................412
Error Codes................................................................................... 427
Specifications ................................................................................ 428
Software Start Guide / Downloading Images to a Computer
443
Software Start Guide.....................................................................444
Downloading and Viewing the Software Instruction Manuals (PDF Files)
..446
Downloading Images to a Computer.............................................447
Index .............................................................................................449
22
The following precautions are provided to prevent harm or injury to
yourself and others. Make sure to thoroughly understand and follow
these precautions before using the product.
If you experience any malfunctions, problems, or damage to the
product, contact the nearest Canon Service Center or the dealer
from whom you purchased the product.
Safety Precautions
Warnings: Follow the warnings below. Otherwise, death or
serious injuries may result.
To prevent fire, excessive heat, chemical leakage, explosions, and electrical shock,
follow the safeguards below:
• Do not use any batteries, power sources, or accessories not specified in the
Instruction Manual. Do not use any home-made or modified batteries, or the
product if it is damaged.
• Do not short-circuit, disassemble, or modify the battery. Do not apply heat or
solder to the battery. Do not expose the battery to fire or water. Do not subject the
battery to strong physical shock.
• Do not insert the battery’s plus and minus ends incorrectly.
• Do not recharge the battery in temperatures outside the allowable charging
(working) temperature range. Also, do not exceed the recharge time indicated in
the Instruction Manual.
• Do not insert any foreign metallic objects into the electrical contacts of the camera,
accessories, connecting cables, etc.
When disposing of a battery, insulate the electrical contacts with tape. Contact with
other metallic objects or batteries may cause a fire or an explosion.
If excessive heat, smoke, or fumes are emitted when recharging the battery,
immediately unplug the battery charger from the power outlet to stop recharging.
Otherwise, it may cause a fire, heat damage, or electrical shock.
If the battery leaks, changes color, deforms, or emits smoke or fumes, remove it
immediately. Be careful not to get burned in the process. It may cause a fire, electrical
shock or burns if you keep using it.
Prevent any battery leakage from contacting your eyes, skin, and clothing. It can
cause blindness or skin problems. If the battery leakage comes in contact with your
eyes, skin, or clothing, flush the affected area with lots of clean water without rubbing
it. See a physician immediately.
Do not leave any cords near a heat source. It can deform the cord or melt the
insulation and cause a fire or electrical shock.
Do not hold the camera in the same position for long periods of time. Even if the
camera does not feel too hot, prolonged contact with the same body part may cause
skin redness or blistering due to low-temperature contact burns. Using a tripod is
recommended when using the camera in very hot places or for people with circulation
problems or poor skin sensation.
Do not fire the flash at anyone driving a car or other vehicle. It may cause an accident.
23
Safety Precautions
When the camera or accessories are not in use, make sure to remove the battery, and
disconnect the power plug and connecting cables from the equipment before storing.
This is to prevent electrical shock, excessive heat, fire, and corrosion.
Do not use the equipment where there is flammable gas. This is to prevent an
explosion or a fire.
If you drop the equipment and the casing breaks open to expose the internal parts,
do not touch the exposed internal parts. There is a possibility of an electrical shock.
Do not disassemble or modify the equipment. High-voltage internal parts can cause
electrical shock.
Do not look at the sun or an extremely bright light source through the camera or
lens. Doing so may damage your vision.
Keep equipment out of the reach of children and infants, including when in use. Straps
or cords may accidentally cause choking, electrical shock, or injury. Choking or injury
may also occur if a child or infant accidentally swallows a camera part or accessory. If
a child or infant swallows a part or accessory, consult a physician immediately.
Do not use or store the equipment in dusty or humid places. Likewise, keep the battery
away from metallic items and store it with its protective cover attached to prevent short-
circuit. This is to prevent fire, excessive heat, electrical shock, and burns.
Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane’s
instruments or the hospital’s medical equipment.
To prevent a fire and electrical shock, follow the safeguards below:
• Always insert the power plug all the way in.
• Do not handle a power plug with wet hands.
• When unplugging a power plug, grasp and pull the plug instead of the cord.
• Do not scratch, cut, or excessively bend the cord or put a heavy object on the
cord. Also do not twist or tie the cords.
• Do not connect too many power plugs to the same power outlet.
• Do not use a cord whose wire is broken or insulation is damaged.
Unplug the power plug periodically and clean off the dust around the power outlet
with a dry cloth. If the surrounding is dusty, humid, or oily, the dust on the power
outlet may become moist and short-circuit the outlet, causing a fire.
Do not connect the battery directly to an electrical outlet or a car’s cigarette lighter
outlet. The battery may leak, generate excessive heat or explode, causing fire,
burns, or injuries.
A thorough explanation of how to use the product by an adult is required when the
product is used by children. Supervise children while they are using the product.
Incorrect usage may result in electrical shock or injury.
Do not leave a lens or lens-attached camera in the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
Do not cover or wrap the product with a cloth when using it. Doing so may trap heat
within and cause the casing to deform or catch fire.
Be careful not to get the camera wet. If you drop the product in the water or if water
or metal get inside the product, promptly remove the battery. This is to prevent fire,
electrical shock, and burns.
Do not use paint thinner, benzene, or other organic solvents to clean the product.
Doing so may cause fire or a health hazard.
Safety Precautions
24
Cautions: Follow the cautions below. Otherwise, physical injury
or property damage may result.
Do not use or store the product in a high-temperature location such as inside a car
under the hot sun. The product may become hot and cause burns. Doing so may
also cause battery leakage or explosion, which will degrade the performance or
shorten the life of the product.
Do not carry the camera around when it is attached to a tripod. Doing so may cause
an injury or an accident. Also make sure the tripod is sturdy enough to support the
camera and lens.
Do not leave the product in a low-temperature environment for an extended period of
time. The product will become cold and may cause injury when touched.
Do not fire the flash near the eyes. It may hurt the eyes.
25
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult the nearest Canon
Service Center. Wipe off any water droplets with a dry and clean cloth. If the
camera has been exposed to salty air, wipe it with a clean, well-wrung wet
cloth.
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also, avoid using or leaving the camera near
anything emitting strong radio waves, such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat, such as in a car in direct
sunlight. High temperatures can cause the camera to malfunction.
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
Do not block the mirror operation with your finger, etc. Doing so may cause a
malfunction.
Use only a commercially-available blower to blow away dust when it adheres
to the lens, viewfinder, reflex mirror, focusing screen, etc. Do not use
cleaners that contain organic solvents to clean the camera body or lens. For
stubborn dirt, take the camera to the nearest Canon Service Center.
Do not touch the camera’s electrical contacts with your fingers. This is to
prevent the contacts from corroding. Corroded contacts can cause camera
malfunction.
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
Handling Precautions
Handling Precautions
26
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If there is condensation, remove the lens, card and
battery from the camera, and wait until condensation has evaporated before
using the camera.
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
Avoid storing the camera where there are chemicals that result in rust and
corrosion such as in a chemical lab.
If the camera has not been used for an extended period, test all its functions
before using it. If you have not used the camera for some time or if there is
an important shoot such as a foreign trip coming up, have the camera
checked by your nearest Canon Service Center or check the camera
yourself and make sure it is working properly.
If you repeat continuous shooting or perform Live View shooting or movie
shooting for a prolonged period, the camera may become hot. This is not a
malfunction.
If there is a bright light source inside or outside the image area, ghosting
may occur.
LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, 0.01% or fewer of the pixels
may be dead, and there may also be spots of black, red, or other colors.
Dead pixels are not a malfunction. They do not affect the images recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporary and will disappear when the camera is left unused for a few days.
The LCD monitor display may seem slightly slow in low temperatures, or
look black in high temperatures. It will return to normal at room temperature.
27
Handling Precautions
Cards
To protect the card and its recorded data, note the following:
Do not drop, bend, or wet the card. Do not subject it to excessive force,
physical shock, or vibration.
Do not touch the card’s electronic contacts with your fingers or anything
metallic.
Do not affix any stickers, etc. on the card.
Do not store or use the card near anything that has a strong magnetic field,
such as a TV set, speakers, or magnets. Also avoid places prone to having
static electricity.
Do not leave the card in direct sunlight or near a heat source.
Store the card in a case.
Do not store the card in hot, dusty, or humid locations.
Smudges Adhering to the Front of the Sensor
Besides dust entering the camera from outside, in rare cases, lubricant from the
camera’s internal parts may adhere to the front of the sensor. If smudges are
visible on the images, having the sensor cleaned by a Canon Service Center is
recommended.
Lens
After detaching the lens from the camera, put down the lens
with the rear end up and attach the rear lens cap to avoid
scratching the lens surface and electrical contacts.
Contacts
28
Nomenclature
Built-in flash/AF-assist beam emitter
(p.182/117)
Wi-Fi lamp
<g> ISO speed setting
button (p.132)
<6> Main Dial
Shutter button
(p.51)
Mirror (p.179, 306)
Contacts (p.27)
Lens mount
Lens lock pin
<Y> External microphone IN terminal
(p.271)
<F> Remote control terminal (p.385)
Depth-of-field preview button
(p.168)
Lens release button (p.49)
Red-eye
reduction/
Self-timer
lamp
(p.183/125)
EF lens mount index (p.48)
Built-in
microphones
(p.234)
Flash sync contacts
Hot shoe (p.187)
<D> Flash button (p.182)
Speaker (p.326)
Strap mount
(p.35)
Body cap (p.48)
<U> Display button
(p.70)
p (N-Mark)*
* Used for Wi-Fi connections via the NFC function.
<V> Focal plane
mark (p.92)
Mode Dial (p.30)
Power switch (p.42)
EF-S lens mount index (p.48)
<k> Wi-Fi button
Grip
29
Nomenclature
Viewfinder eyepiece
Eyecup (p.386)
<B> Info button
(p.110, 199, 240)
<M> Menu
button (p.60)
LCD monitor/
Touch screen
(p.60, 288/65,
314, 328)
Tripod socket
<x> Playback button (p.110)
<W><X><Y><Z>: <V> Cross keys (p.60)
<Q/0> Quick Control button/
Setting button (p.58/60)
<D> HDMI mini OUT terminal (p.333)
<A/I> AE lock/
FE lock button/
Index/Reduce button
(p.178/185/310/313)
<S/u>
AF point selection/
Magnify button
(p.119/313)
Access lamp
(p.40)
DC cord hole
(p.381)
Card slot/Battery
compartment cover
release lever (p.38)
<L> Erase button (p.339)
Card slot (p.38)
Card slot/Battery
compartment cover (p.38)
<g> Aperture/
Exposure compensation
button
<A> Live View shooting/
Movie shooting button (p.196/234)
Battery compartment (p.38)
<D> Digital terminal (p.447)
Dioptric adjustment knob (p.50)
Nomenclature
30
Mode Dial
The Mode Dial includes the Basic Zone modes and Creative Zone
modes.
Basic Zone
All you do is press the shutter button. The camera sets everything to
suit the subject or scene for shooting.
A:Scene Intelligent Auto
(p.72)
7:Flash Off (p.77)
C:Creative Auto (p.78)
8:Special scene (p.85)
v:Creative filters (p.100)
2Portrait (p.87) PFood (p.93)
qGroup Photo (p.88) xCandlelight (p.94)
3Landscape (p.89) 6Night Portrait (p.95)
5Sports (p.90) FHandheld Night Scene (p.96)
CKids (p.91) GHDR Backlight Control (p.97)
4Close-up (p.92)
GGrainy B/W (p.102) cMiniature effect (p.103)
WSoft focus (p.102) AHDR art standard (p.103)
XFish-eye effect (p.102) BHDR art vivid (p.103)
ZWater painting effect (p.103) CHDR art bold (p.104)
HToy camera effect (p.103) DHDR art embossed (p.104)
Nomenclature
32
Quick Control Screen
(Example in the <
d
> mode with
[s: Shooting screen: Standard]
set (p.58))
The display will show only the settings currently applied.
Shutter speed
Exposure level indicator
Exposure compensation amount
(p.174)
AEB range (p.176)
Shooting mode
Picture Style (p.135)
Aperture
z Main Dial pointer
AF operation (p.114)
Manual focus
(p.122, 228)
u White balance correction (p.147)
B White balance bracketing (p.148)
Multi Shot Noise Reduction (p.150)
Possible shots during
white balance bracketing
Possible shots
Image-recording quality
(p.128)
73 Large/Fine
83 Large/Normal
74 Medium/Fine
84 Medium/Normal
7aSmall 1/Fine
8aSmall 1/Normal
bSmall 2 (Fine)
1+73
RAW+Large/
Fine
1RAW
Flash exposure
compensation
(p.184)
Highlight tone priority
(p.367)
ISO speed (p.132)
Self-timer countdown
Metering mode (p.172)
Auto Lighting Optimizer (p.149)
Quick Control icon
(p.59)
Battery level (p.43)
White balance (p.143)
Wi-Fi signal strength
Eye-Fi transmission status (p.387)
Drive mode (p.123, 125)
AF point selection (p.119)
GPS connection indicator (p.282)
Bluetooth function (p.382)
Wi-Fi function
33
Nomenclature
Viewfinder Information Display
The display will show only the settings currently applied.
Shutter speed (p.164)
Bulb exposure (buLb)
FE lock (FEL)
Busy (buSY)
Built-in flash recharging (D buSY)
No card warning (Card)
Card error (Card)
Card full warning (FuLL)
Error code (Err)
Spot metering circle (p.172)
Focusing screen
<A> AE lock (p.178)
AEB in-progress (p.176)
<D> Flash-ready
(p.182, 187)
Improper FE lock
warning
<e> High-speed sync
(p.193)
<d>FE lock (p.185) /
FEB in-progress
<y> Flash exposure
compensation (p.184)
Aperture (p.166)
Exposure level indicator
Exposure compensation amount (p.174)
AEB range (p.176)
Red-eye reduction lamp ON
<A> Highlight tone priority
(p.367)
ISO speed (p.132)
Maximum burst
<o> Focus indicator
<g> ISO speed
indicator (p.132)
AF point (p.119)
<•> AF point activation indicator
<O> Exposure compensation (p.174)
<i> Warning icon
(p.369)
Nomenclature
34
Battery Charger LC-E17
Charger for Battery Pack LP-E17 (p.36).
Battery Charger LC-E17E
Charger for Battery Pack LP-E17 (p.36).
Power plug
Charge lamp
Full-charge lamp
Battery pack slot
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet, if needed.
Power cord
Power cord socket
Battery pack slot
Charge lamp
Full-charge lamp
35
1
Getting Started and
Basic Camera Operations
This chapter describes preparatory steps before you
start shooting and the basic camera operations.
Attaching the Provided Strap
Pass the end of the strap through
the camera’s strap mount eyelet
from the bottom. Then pass it
through the strap’s buckle as shown
in the illustration. Pull the strap to
take up any slack and make sure
the strap will not loosen from the
buckle.
The eyepiece cover is also
attached to the strap (p.386).
Eyepiece cover
36
1Remove the protective cover.
Detach the protective cover provided
with the battery.
2Attach the battery.
As shown in the illustration, attach the
battery securely to the charger.
To detach the battery, follow the
above procedure in reverse.
3Recharge the battery.
For LC-E17
As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.
For LC-E17E
Connect the power cord to the
charger and insert the plug into a
power outlet.
XRecharging starts automatically and
the charge lamp lights up in orange.
XWhen the battery is fully recharged,
the full-charge lamp will light up in
green.
It takes approx. 2 hours to fully recharge a completely
exhausted battery at room temperature (23°C / 73°F). The time
required to recharge the battery will vary greatly depending on the
ambient temperature and the battery’s remaining capacity.
For safety reasons, recharging in low temperatures (5°C - 10°C /
41°F - 50°F) will take longer (up to approx. 4 hr.).
Charging the Battery
LC-E17
LC-E17E
Full-charge lamp
Charge lamp
37
Charging the Battery
Upon purchase, the battery is not fully charged.
Charge the battery before use.
Recharge the battery on the day before or on the day it is to be
used.
Even during storage, a charged battery will gradually drain and lose
its capacity.
After recharging the battery, detach it and disconnect the
charger from the power outlet.
When not using the camera, remove the battery.
If the battery is left in the camera for a prolonged period, a small
amount of power current will keep being released, resulting in
excess discharge and shorter battery life. Store the battery with the
protective cover (provided) attached. Storing the battery when it is
fully charged may lower the battery performance.
The battery charger can also be used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/
60 Hz power source. If necessary, attach a commercially-available
plug adapter for the respective country or region. Do not attach any
portable voltage transformer to the battery charger. Doing so may
damage the battery charger.
If the battery becomes exhausted quickly even after having
been fully charged, the battery has reached the end of its
service life.
Check the battery’s recharge performance (p.380) and purchase a
new battery.
Tips for Using the Battery and Charger
After disconnecting the charger’s power plug, do not touch the prongs for
approx. 5 sec.
Do not charge any battery other than a Battery Pack LP-E17.
Battery Pack LP-E17 is dedicated to Canon products only. Using it with
an incompatible battery charger or product may result in malfunction or
accidents for which Canon cannot be held liable.
38
Load a fully charged Battery Pack LP-E17 into the camera. The camera
can use an SD, SDHC, or SDXC memory card (sold separately). UHS-I
Speed Class SDHC and SDXC memory cards can also be used. The
captured images are recorded onto the card.
Make sure the card’s write-protect switch is set upward to
enable writing/erasing.
1Open the cover.
Slide the lever as shown by the
arrows and open the cover.
2Insert the battery.
Insert the end with the battery
contacts.
Insert the battery until it locks in
place.
3Insert the card.
As shown by the illustration, face
the card’s label side toward the
back of the camera and insert it
until it clicks in place.
4Close the cover.
Press the cover until it snaps shut.
When you set the power switch to
<1>, the number of possible shots
(p.43) will be displayed on the LCD
monitor.
Installing and Removing the Battery and Card
Installing the Battery and Card
Write-protect switch
39
Installing and Removing the Battery and Card
1Set the power switch to <2>
(p.42).
2Open the cover.
Make sure the access lamp is off,
then open the cover.
If [Recording...] is displayed, close
the cover.
3Remove the battery.
Press the battery lock lever as shown
by the arrow and remove the battery.
To prevent short-circuiting, be sure to
attach the provided protective cover
(p.36) to the battery.
4Remove the card.
Gently push in the card, then let go to
eject it.
Pull the card straight out.
5Close the cover.
Press the cover until it snaps shut.
Removing the Battery and Card
After opening the card slot/battery compartment cover, be careful not to
swing it back any further. Otherwise, the hinge may break.
The number of possible shots varies depending on the remaining
capacity of the card, image-recording quality, ISO speed, etc.
Setting [z1: Release shutter without card] to [Disable] will prevent
you from forgetting to insert a card before shooting (p.287).
Installing and Removing the Battery and Card
40
When the access lamp is lit or blinking, it indicates that images are
being written to, read from, or erased from the card, or data is being
transferred. Do not open the card slot/battery compartment cover.
Also, never do any of the following while the access lamp is lit or
blinking. Otherwise, it can damage the image data, card, or camera.
• Removing the card.
• Removing the battery.
• Shaking or banging the camera around.
• Unplugging and connecting a power cord (when household power
outlet accessories (sold separately, p.381) are used).
If the card already contains recorded images, the image number may not
start from 0001 (p.292).
If a card-related error message is displayed on the LCD monitor, remove
and reinsert the card. If the error persists, use a different card.
If you can transfer images on the card to a computer, transfer all the
images and then format the card with the camera (p.68). The card may
then return to normal.
Do not touch the card’s contacts with your fingers or metal objects. Do
not expose the contacts to dust or water. If smudges adhere to the
contacts, contact failure may result.
Multimedia cards (MMC) cannot be used. (Card error will be displayed.)
41
After you flip out the LCD monitor, you can set menu functions, use Live
View shooting, shoot movies, or play back photos and movies. You can
change the direction and angle of the LCD monitor.
1Flip out the LCD monitor.
2Rotate the LCD monitor.
When the LCD monitor is swung out,
you can rotate it up, down, or over
180° to face the subject.
The indicated angle is only
approximate.
3Face it toward you.
Normally, use the camera with the
LCD monitor facing you.
Using the LCD Monitor
175°
180°
90°
Be careful not to forcefully rotate the LCD monitor, putting much power
on the rotating axis (hinge).
When a cable is connected to a camera terminal, the rotation angle
range of the flipped out LCD monitor will be limited.
When not using the camera, close the LCD monitor with the screen
facing inward. You can protect the screen.
During Live View shooting or movie shooting, facing the LCD monitor
toward the subject will display a mirror image on the screen (right/left
reversed).
42
If you turn on the power switch and the date/time/zone setting
screen appears, see page 44 to set the date/time/zone.
<k> : The camera turns on. You can
shoot movies (p.234).
<1> : The camera turns on. You can
shoot still photos.
<2> : The camera is turned off and
does not function. Set the
power switch to this position
when not using the camera.
Whenever you set the power switch to <1> or <2>, sensor
cleaning will be performed automatically. (A small sound may be
heard.) During the sensor cleaning, the LCD monitor will display
<f>.
Even during the sensor cleaning, if you press the shutter button
halfway (p.51), cleaning operation will be stopped, and you can take
a picture immediately.
If you repeatedly turn the power switch <1>/<2> at a short
interval, the <f> icon may not be displayed. This is normal and
not a malfunction.
To save battery power, if the camera is not operated for a prolonged
period, the power will turn off automatically after the time set under [52:
Auto power off] (p.288). To turn on the camera again, just press the
shutter button halfway (p.51).
Turning on the Power
Automatic Sensor Cleaning
3 Auto Power Off
If you set the power switch to <2> while an image is being recorded to
the card, [Recording...] will be displayed and the power will turn off after the
recording finishes.
43
Turning on the Power
When the power is turned on, the battery level will be indicated in one of
the four levels.
z: Battery level is sufficient.
x: Battery level is low, but the
camera can still be used.
c: Battery will be exhausted soon.
(Blinks)
n: Recharge the battery.
Number of Possible Shots with Viewfinder Shooting
(Approx. number of shots)
The figures above are based on a fully-charged Battery Pack LP-E17, no Live
View shooting, and CIPA (Camera & Imaging Products Association) testing
standards.
z Battery Level Indicator
Temperature Room Temperature
(23°C / 73°F)
Low Temperatures
(0°C / 32°F)
No Flash 840 770
50% Flash Use 650 620
Doing any of the following will exhaust the battery faster:
• Pressing the shutter button halfway for a prolonged period.
• Activating the AF frequently without taking a picture.
• Using the lens’s Image Stabilizer.
• Using the LCD monitor frequently.
• Using the Wi-Fi function.
The number of possible shots may decrease depending on the actual
shooting conditions.
The lens operation is powered by the camera’s battery. Certain lenses
may exhaust the battery faster than others.
For the number of possible shots with Live View shooting, see page 197.
See [53: Battery info.] to check the battery condition (p.380).
44
When you turn on the power for the first time or if the date/time/zone
have been reset, the date/time/zone setting screen will appear. Follow
the steps below to set the time zone first. Set the camera to the time
zone in which you currently live so that, when you travel, you can simply
change the setting to the correct time zone for your destination, and the
camera will automatically adjust the date/time.
Note that the date/time appended to recorded images will be based
on this date/time setting. Be sure to set the correct date/time.
1Display the main tabs.
Press the <M> button to display
the main tabs.
2Under the [52] tab, select [Date/
Time/Zone].
Press the <Y> <Z> keys to select
the [5] tab, then press <0>.
Press the <Y> <Z> keys to select
the [52] tab.
Press the <W> <X> keys to select
[Date/Time/Zone], then press
<0>.
3Set the time zone.
[London] is set by default.
Press the <Y> <Z> keys to select
[Time zone], then press <0>.
3 Setting the Date, Time, and Zone
For the menu function setting procedures, see pages 60-64.
In step 3, the time displayed in [Time zone] is the time difference
compared to Coordinated Universal Time (UTC).
45
3 Setting the Date, Time, and Zone
Press <0> again.
Press the <W> <X> keys to select
the time zone, then press <0>.
If your desired time zone is not listed,
press the <M> button, then
proceed to the next step to set it (with
the time difference from the
Coordinated Universal Time, UTC).
To set the time difference from UTC,
press the <Y> <Z> keys to select a
parameter (+/-/hour/minute) for [Time
difference].
Press <0> so <r> is displayed.
Press the <W> <X> keys to set it,
then press <0>. (Returns to <s>.)
After entering the time zone or time
difference, press the <Y> <Z> keys
to select [OK], then press <0>.
4Set the date and time.
Press the <Y> <Z> keys to select
the number.
Press <0> so <r> is displayed.
Press the <W> <X> keys to set it,
then press <0>. (Returns to <s>.)
3 Setting the Date, Time, and Zone
46
5Set the daylight saving time.
Set it as necessary.
Press the <Y> <Z> keys to select
[Y].
Press <0> so <r> is displayed.
Press the <W> <X> keys to select
[Z], then press <0>.
When the daylight saving time is set
to [Z], the time set in step 4 will
advance by 1 hour. If [Y] is set, the
daylight saving time will be canceled
and the time will go back by 1 hour.
6Exit the setting.
Press the <Y> <Z> keys to select
[OK], then press <0>.
XThe date/time/zone and daylight
saving time will be set and the menu
will reappear.
The date/time/zone settings may be reset in the following cases. If this
happens, set the date/time/zone again.
• When the camera is stored without the battery.
• When the camera’s battery becomes exhausted.
• When the camera is exposed to below freezing temperatures for a
prolonged period.
The set time and date will start from when you select [OK] in step 6.
Even if [52: Auto power off] is set to [4 min.] or less, the auto power off
time will be approx. 6 min. when the [52: Date/Time/Zone] setting
screen is displayed.
After changing the time zone or time difference setting, check that the
correct date and time are set.
47
1Display the main tabs.
Press the <M> button to display
the main tabs.
2Under the [52] tab, select
[LanguageK].
Press the <Y> <Z> keys to select
the [5] tab, then press <0>.
Press the <Y> <Z> keys to select
the [52] tab.
Press the <W> <X> keys to select
the [LanguageK], then press
<0>.
3Set the desired language.
Press the <W> <X> keys to select
the language, then press <0>.
XThe interface language will change.
3 Selecting the Interface Language
48
The camera is compatible with all Canon EF and EF-S lenses. Note
that you cannot use the EF-M lenses.
1Remove the caps.
Remove the rear lens cap and the
body cap by turning them as shown
by the arrows.
2Attach the lens.
Align the lens’s red or white index
with the camera’s index matching the
same color. Turn the lens as shown
by the arrow until it clicks in place.
3Set the lens’s focus mode switch
to <AF>.
<AF> stands for autofocus.
<MF> stands for manual focus.
4Remove the front lens cap.
Attaching and Detaching a Lens
Attaching a Lens
White index
Red index
Tips for Avoiding Smudges and Dust
When changing lenses, do it quickly in a place with minimal dust.
When storing the camera without a lens attached, be sure to attach the
body cap to the camera.
Remove dust on the body cap before attaching it.
49
Attaching and Detaching a Lens
Turn the zoom ring on the lens
with your fingers.
Perform the zoom operation before
focusing. Turning the zoom ring after
achieving focus may throw off the focus.
While pressing the lens release
button, turn the lens as shown by
the arrow.
Turn the lens until it stops, then detach it.
Attach the rear lens cap to the
detached lens.
Zooming
Detaching the Lens
Do not look at the sun directly through any lens. Doing so may cause loss of vision.
When attaching or detaching a lens, set the camera’s power switch
to <2>.
If the front part (focusing ring) of the lens rotates during autofocusing, do
not touch the rotating part.
During viewfinder shooting or Live View shooting, if you use a TS-E lens
(except the TS-E17mm f/4L or TS-E24mm f/3.5L II) and shift or tilt the
lens or use an extension tube, the standard exposure may not be
obtained or the exposure may be irregular.
If you use a TS-E lens, certain shift and rotation functions may be
restricted, and attaching or detaching the lens may also be restricted.
Angle of View
Since the image area is smaller than
the 35mm film format, the effective
angle of view of an attached lens will be
equivalent to that of a lens with approx.
1.6x of the focal length indicated.
Image area (Approx.)
(22.3 x 14.9 mm /
0.88 x 0.59 in.)
35mm film format
(36 x 24 mm /
1.42 x 0.94 in.)
For instructions on how to use the lens, refer to the Lens Instruction Manual (p.4).
50
Turn the dioptric adjustment
knob.
Turn the knob left or right so that the
AF points in the viewfinder look
sharp.
If the knob is difficult to turn, remove
the eyecup (p.386).
To obtain sharp images, hold the camera still to minimize camera shake.
1. Wrap your right hand around the camera grip firmly.
2. Hold the lens bottom with your left hand.
3. Rest your right index finger lightly on the shutter button.
4. Press your arms and elbows lightly against the front of your body.
5. To maintain a stable stance, place one foot slightly ahead of the other.
6. Press the camera against your face and look through the viewfinder.
Basic Shooting Operations
Adjusting the Viewfinder Clarity
Holding the Camera
If the camera’s dioptric adjustment still cannot provide a sharp viewfinder
image, using E-series Dioptric Adjustment Lenses (sold separately) is
recommended.
Vertical shooting
Horizontal shooting
To shoot while looking at the LCD monitor, see page 195.
51
Basic Shooting Operations
The shutter button has two steps. You can press the shutter button
halfway. Then you can further press the shutter button completely.
Pressing Halfway
This activates autofocusing and the
automatic exposure system that sets the
shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayed in the viewfinder
(0).
While you press the shutter button
halfway, the LCD monitor will turn off
(p.301).
Pressing Completely
This releases the shutter and takes the
picture.
Preventing Camera Shake
Hand-held camera movement during the moment of exposure is called
camera shake. It can cause blurred pictures. To prevent camera shake,
note the following:
• Hold and steady the camera as shown on the preceding page.
• Press the shutter button halfway to autofocus, then slowly press the
shutter button completely.
Shutter Button
If you press the shutter button completely without pressing it halfway
first, or if you press the shutter button halfway and then press it
completely immediately, the camera will take a moment before it takes
the picture.
Even during menu display, image playback, or image recording, you can
immediately go back to shooting-ready state by pressing the shutter
button halfway.
52
You can set how information is displayed on the screen according to
your preference. Change the settings as necessary.
1Display the main tabs.
Press the <M> button to display
the main tabs.
2Select the [s] tab.
Press the <Y> <Z> keys of the
cross keys to select the [s] tab,
then press <0>.
You can select [Standard] or [Guided] (friendly display) for the Quick
Control screen in viewfinder shooting. By default, it is set to [Guided].
1Select [Shooting screen].
2Select the display method.
3 Setting the Screen Display Level
Shooting Screen
53
3 Setting the Screen Display Level
Sample Screens
<C>: Standard<C>: Guided
<f>: Standard<f>: Guided
In Creative Zone modes, when [Guided] is set, only the functions particular
to the set shooting mode are displayed on the Quick Control screen. Note
that items that cannot be set from the Quick Control screen when [Guided]
is selected can be set via the menu screen (p.61).
3 Setting the Screen Display Level
54
You can select the display type from [Standard] or [Guided]. If you set
[Guided], main tab descriptions are provided when you press the
<M> button. If you set [Standard], you proceed directly to the
menu screen when you press the <M> button. By default, it is set to
[Guided].
1Select [Menu display].
2Select the display type.
Menu Display
Main tabs
When [Guided] is set, the [9 (My Menu)] tab does not appear. To set My
Menu (p.373), change the menu display level to [Standard].
55
3 Setting the Screen Display Level
You can display the description of the shooting mode (mode guide)
when switching the shooting mode during viewfinder shooting. By
default, it is set to [Enable].
1Select [Mode guide].
2Select [Enable].
3Turn the Mode Dial.
XA description of the selected shooting
mode will appear.
4Press the <X> key.
XThe rest of the description will
appear.
When you press <0>, the
description will disappear and the
Quick Control screen will appear.
In the <8> and <v> shooting
modes, the shooting mode selection
screen will appear.
Shooting Mode Guide
In step 3 and step 4, if you tap on [OK] or press the shutter button halfway,
the description will disappear and the Quick Control screen will appear.
3 Setting the Screen Display Level
56
When using Quick Control or setting menu items, you can display a
brief description of functions and options (feature guide). By default, it is
set to [Enable].
1Select [Feature guide].
2Select [Enable].
Sample Screens
Feature Guide
Quick Control screen Menu screen
Feature guide
The description will disappear when you tap on it or proceed with the
operation.
57
3 Setting the Screen Display Level
Shooting tips appear when [Shooting screen] is set to [Guided] (p.52)
and the camera settings result in any of the following conditions. In
Basic Zone modes, shooting tips appear regardless of the [Shooting
screen] setting.
• You want to blur the background further (by setting the lowest aperture
value in the <f> mode).
• The image is likely to be overexposed.
• The image is likely to be underexposed.
• Camera shake is likely to occur (only in Basic Zone modes).
1Tap on the area within the frame.
XThe shooting tips will appear.
You can also display the shooting tips
by pressing the <L> button.
2Check the shooting tips.
You can scroll up and down by
tapping on the screen.
You can also scroll by pressing the
<W> <X> keys.
3Tap on [2].
XShooting tips will disappear, and the
screen in step 1 will reappear.
You can also hide the shooting tips by
pressing <0>.
Shooting Tips
58
You can directly select and set the shooting functions displayed on the
LCD monitor with intuitive operations. This is called Quick Control.
1Press the <Q> button (7).
XThe Quick Control screen will appear.
2Set the desired functions.
Press the <V> cross keys to select a
function.
XThe settings of the selected function
and Feature guide (p.56) will appear.
Turn the <6> dial to change the
setting.
3Take the picture.
Press the shutter button completely to
take the picture.
XThe captured image will be displayed.
Q Quick Control for Shooting Functions
Basic Zone modes Creative Zone modes
For the functions settable in Basic Zone modes and their setting
procedures, see page 107.
In steps 1 and 2, you can also tap on the LCD monitor to perform the
operation (p.65).
59
Q Quick Control for Shooting Functions
When [s: Shooting screen: Guided] is Set
When [s: Shooting screen: Standard] is Set
* These functions cannot be set with Quick Control.
Sample Quick Control Screen
Exposure
compensation
(p.174)
Aperture (p.166)
AF operation (p.114)
Drive mode (p.123)
Return
AF point selection (p.119)
Shutter speed (p.164)
AF operation (p.114)
White balance correction (p.147)
Shooting mode* (p.30) Highlight tone priority* (p.367)
Auto Lighting Optimizer (p.149)
Picture Style (p.135)
Exposure
compensation/
AEB setting
(p.174/176)
ISO speed (p.132)
Image-recording quality
(p.128)
Aperture (p.166)
Flash exposure
compensation (p.184)
White balance bracketing (p.148)
AF point selection (p.119)
White balance (p.143)
Return
Metering mode (p.172)
Auto Lighting Optimizer (p.149)
Drive mode (p.123)
60
You can configure various settings with the menus such as the image-
recording quality, date/time, etc.
3
Menu Operations and Configurations
The menu tabs and items displayed vary depending on the shooting
mode.
Menu Screen
LCD monitor
<0> button
Creative Zone modes
<M> button
Basic Zone modes Movie shooting
<V> cross keys
Menu items Menu settings
Secondary
tabs
61
3 Menu Operations and Configurations
When [s: Menu display: Guided] is Set
1Display the main tabs.
When you press the <M> button,
the main tabs and a description of the
selected tab will appear.
2Select a main tab.
Each time you press the <Y> <Z>
keys of the cross keys, the main tab
(group of functions) will switch.
3Display the menu screen.
Press <0> to display the menu
screen.
To return to the main tab screen,
press the <M> button.
4Select a secondary tab.
Press the <Y> <Z> keys of the
cross keys to select a secondary tab.
For example, in this manual, the
[z4] tab refers to the screen
displayed when the z (Shooting)
tab’s [4] is selected.
5Select the desired item.
Press the <W> <X> keys of the cross
keys to select the item, then press
<0>.
Menu Setting Procedure
Main tabs
3 Menu Operations and Configurations
62
6Select the setting.
Press the <W> <X> or <Y> <Z>
keys of the cross keys to select the
desired setting. (Some settings are
selected with the <W> and <X> keys,
and others are selected with the <Y>
and <Z> keys.)
The current setting is indicated in
blue.
7Set the setting.
Press <0> to set it.
XIf you change the setting from the
default, it will be indicated in blue
(available only for the menu items
under the [z] tab).
8Exit the setting.
Press the <M> button twice to
exit the menu and return to shooting-
ready state.
In step 2, you can also use the <6> dial.
You can also go to the menu screen by tapping on [OK] in step 3.
In steps 2 to 8, you can also tap on the LCD monitor to perform the
operation (p.65).
The description of menu functions hereafter assumes that the menu
screen is displayed.
To cancel the operation, press the <M> button.
For details about each menu item, see page 402.
63
3 Menu Operations and Configurations
When [s: Menu display: Standard] is Set
1Display the menu screen.
Press the <M> button to display
the menu screen.
2Select a tab.
Turn the <6> dial or press the <Y>
<Z> keys to select the main tab and
secondary tab.
For example, in this manual, the
[z4] tab refers to the screen
displayed when the z (Shooting)
tab’s [4] is selected.
The subsequent operations are the
same as those for [s: Menu
display: Guided]. See the steps on
page 61, starting with step 5.
To exit the setting, press the <M>
button once.
Main tabs
3 Menu Operations and Configurations
64
Example: When [Multi Shot
Noise Reduction] is set
Dimmed menu items cannot be set. The
menu item is dimmed if another function
setting is overriding it.
You can see the overriding function by
selecting the dimmed menu item and
pressing <0>.
If you cancel the overriding function’s
setting, the dimmed menu item will
become settable.
Dimmed Menu Items
You may not be able to see the overriding function for certain dimmed menu
items.
With [Clear all camera settings] under [54: Clear settings], you can reset
the menu functions to the default settings (p.298).
65
You can operate the camera by tapping on the LCD monitor (touch-
sensitive panel) with your fingers.
Sample Screen (Quick Control)
Use your finger to tap on (touch
briefly and then remove your finger
from) the LCD monitor.
By tapping, you can select menus,
icons, etc. displayed on the LCD
monitor.
For example, when you tap on [ ],
the Quick Control screen appears. By
tapping on [Q], you can return to
the preceding screen.
Operations possible by tapping on the screen
Setting menu functions after pressing the <M> button
Quick Control
Setting functions after pressing the <g> or <S> button
Touch AF and Touch Shutter in Live View shooting
AF point selection in movie shooting
Setting functions in Live View shooting and movie shooting
Playback operations
d
Operating the Camera with Touch Screen
Tap
If [53: Beep] is set to [Touch n], the beep will not sound for touch
operations (p.287).
d Operating the Camera with Touch Screen
66
Sample Screen (Menu screen)
Slide your finger while touching the
LCD monitor.
Sample Screen (Scale display)
Operations possible by dragging your finger on the screen
Selecting a menu tab or item after pressing the <M> button
Setting with scale display
Quick Control
Selecting AF points
Setting functions in Live View shooting and movie shooting
Playback operations
Drag
67
d Operating the Camera with Touch Screen
1Select [Touch control].
Under the [53] tab, select [Touch
control], then press <0>.
2Set the touch control response
setting.
Select the desired setting, then press
<0>.
[Standard] is the normal setting.
[Sensitive] provides a more reactive
touch screen response than
[Standard]. Try using both settings
and select the one you prefer.
To disable touch operations, select
[Disable].
3 Setting the Touch Control Response
Cautions for Touch Control Operations
Since the LCD monitor is not pressure sensitive, do not use any sharp
objects, such as your fingernail or a ballpoint pen, for touch operations.
Do not use wet fingers for touch operations.
If the LCD monitor has any moisture or if your fingers are wet, the touch
screen may not respond or malfunction may occur. In such a case, turn
off the power and wipe off the moisture with a cloth.
Attaching any commercially-available protective sheet or sticker on the
LCD monitor may degrade the touch operation response.
If you quickly perform touch operation when [Sensitive] is set, the touch
operation response may be poor.
68
If the card is new or was previously formatted by another camera or
computer, format the card with this camera.
1Select [Format card].
Under the [51] tab, select [Format
card], then press <0>.
2Format the card.
Select [OK], then press <0>.
XThe card will be formatted.
XWhen the formatting is complete, the
menu will reappear.
For low-level formatting, press the
<L> button to add a checkmark <X>
to [Low level format], then select
[OK].
3 Formatting the Card
When the card is formatted, all images and data on the card will be
erased. Even protected images will be erased, so make sure there is
nothing you need to keep. If necessary, transfer the images and data to
a computer, etc. before formatting the card.
The card capacity displayed on the card format screen may be smaller
than the capacity indicated on the card.
This device incorporates exFAT technology licensed from Microsoft.
69
3 Formatting the Card
The card is new.
The card was formatted by a different camera or a computer.
The card is full of images or data.
A card-related error is displayed (p.427).
Card’s file formats
SD/SDHC cards will be formatted in FAT32. SDXC cards will be
formatted in exFAT.
When shooting a movie with a card formatted in exFAT, the movie
will be recorded in a single file (instead of being split into multiple
files) even if it exceeds 4 GB. (The movie file will exceed 4 GB.)
Perform [Format card] in the following cases:
Low-level Formatting
Perform low-level formatting if the card’s writing or reading speed seems
slow or if you want to totally erase the data on the card.
Since low-level formatting will format all recordable sectors on the card, the
formatting will take slightly longer than normal formatting.
You can stop the low-level formatting by selecting [Cancel]. Even in this
case, normal formatting will already be complete and you can use the card
as usual.
If you format an SDXC card with this camera and then insert it into
another camera, an error may be displayed and the card may become
unusable. Certain computer operating systems or card readers may not
recognize a card formatted in exFAT.
When the card is formatted or data is erased, only the file management
information is changed. The actual data is not completely erased. Be
aware of this when selling or discarding the card. When discarding the
card, perform low-level formatting or destroy the card physically to
prevent personal data from being leaked.
Before using a new Eye-Fi card, the software on the card must be
installed on your computer. Then format the card with the camera.
70
The LCD monitor can display the Quick Control screen, menu screen,
captured images, etc.
When you turn on the power, the
Quick Control screen will appear. You
can then check the current shooting
function settings.
When you press the shutter button
halfway, the display will turn off.
And when you let go of the shutter
button, the display will turn on.
You can also turn off the display by
pressing the <U> button. Press
the button again to turn on the
display.
Switching the LCD Monitor Display
Appears when you press the
<M> button. Press the
button again to return to the
previous screen.
Appears when you press the
<x> button. Press the button
again to return to the previous
screen.
Menu Functions Captured Image
You can set [52: LCD off/on btn] so that the LCD monitor does not turn
off or on (p.301).
Even when the menu screen or captured image is displayed, pressing
the shutter button will enable you to shoot immediately.
71
2
Basic Shooting and
Image Playback
This chapter describes how to use the Basic Zone
modes on the Mode Dial for best results and how to
play back images.
With Basic Zone modes, all you do is point and shoot, and the
camera sets everything automatically (p.107, 390). Also,
because advanced shooting function settings cannot be
changed, you can enjoy shooting photographs without
worrying about botched pictures due to misoperation.
B
a
s
i
c
Z
o
n
e
Before Shooting in the <8> or <v> Mode
When the LCD monitor is turned off, press the <Q> button (p.85,
100) to check which shooting mode is set, then start shooting.
*<8>: Special scene
*<v> : Creative filters
72
<A> is a fully automatic mode. The camera analyzes the scene
and sets the optimum settings automatically. It can also adjust focus
automatically on either the still or moving subject by detecting the
motion of the subject (p.75).
1Set the Mode Dial to <A>.
2Aim the AF point over the subject.
All the AF points will be used to focus,
and the camera will normally focus on
the closest object.
Aiming the center of the AF point over
the subject will make focusing easier.
3Focus on the subject.
Press the shutter button halfway. The
lens elements will shift to focus.
XWhen achieving focus, the dot inside
the AF point achieving focus flashes
briefly in red. At the same time, the
beeper will sound and the focus
indicator <o> in the viewfinder will
light up.
XIn low light, the AF point(s) will light
up briefly in red.
XThe built-in flash will be raised
automatically as necessary.
A
Fully Automatic Shooting (Scene Intelligent Auto)
AF point
Focus indicator
If a description of the shooting mode appears in step 1, press <0> to hide
it (p.55).
73
A Fully Automatic Shooting (Scene Intelligent Auto)
4Take the picture.
Press the shutter button completely to
take the picture.
XThe captured image will be displayed
for approx. 2 sec. on the LCD
monitor.
When you finish shooting, push down
the built-in flash with your fingers.
The focus indicator <o> blinks and focus is not achieved.
• Aim the AF point over an area with good contrast, then press the
shutter button halfway (p.51).
• If you are too close to the subject, move away and shoot again.
• Select the AF point nearest to where you want to focus (p.119).
The default setting is Automatic selection AF.
Multiple AF points light up simultaneously.
Focus has been achieved at all those points that flash in red. You
can take the picture as long as an AF point covering the target
subject is lighting up.
FAQ
The <A> mode makes the colors look more impressive in nature, outdoor,
and sunset scenes. If you do not obtain the desired color tones, change the
mode to a Creative Zone mode and select a Picture Style other than
<D>, then shoot again (p.135).
A Fully Automatic Shooting (Scene Intelligent Auto)
74
The beeper continues to beep softly. (The focus indicator <o>
does not light up.)
It indicates that the camera is focusing continuously on a moving
subject. (The focus indicator <o> does not light up.) You can take
sharp pictures of a moving subject.
Note that focus lock (p.75) will not work in this case.
Pressing the shutter button halfway does not focus on the
subject.
If the focus mode switch of the lens is set to <MF> (manual focus),
set it to <AF> (autofocus).
The flash fired even if it was daylight.
For a backlit subject, the flash may fire to help lighten the subject’s
dark areas. If you do not want the flash to fire, use the Quick Control
to set [Built-in flash firing] to [b] (p.106) or set the <7> (Flash
Off) mode and shoot (p.77).
The built-in flash fired and the picture came out extremely
bright.
Move further away from the subject and shoot. When shooting with
flash, if the subject is too close to the camera, the picture may come
out extremely bright (overexposure).
In low light, the built-in flash fired a series of flashes.
Pressing the shutter button halfway may trigger the built-in flash to
fire a series of flashes to assist autofocusing. This is called the AF-
assist beam. Its effective range is approx. 4 meters / 13.1 feet. Note
that the built-in flash will make a sound when firing continuously.
This is normal and not a malfunction.
When flash was used, the bottom part of the picture came out
unnaturally dark.
The shadow of the lens barrel was captured in the picture because
the subject was too close to the camera. Move further away from the
subject and shoot. If a hood is attached to the lens, remove it before
taking the flash picture.
75
Depending on the scene, positioning the subject toward the left or right to
include a balanced background will result in a picture with better perspective.
In the <A> mode, pressing the shutter button halfway to focus on a
still subject will lock the focus on that subject. Recompose the shot
while keeping the shutter button pressed halfway, and then press the
shutter button completely to take the picture. This is called “focus lock”.
Focus lock is also possible in other Basic Zone modes (except <8:
5C>).
In the <A> mode, if the subject moves (distance to camera changes)
during or after focusing, AI Servo AF will take effect to focus on the
subject continuously. (The beeper will continue beeping softly.) As long
as you keep the AF point positioned over the subject while pressing the
shutter button halfway, focusing will be continuous. At the decisive
moment, press the shutter button completely to take the picture.
A
Full Auto Techniques (Scene Intelligent Auto)
Recomposing the Shot
Shooting a Moving Subject
A Full Auto Techniques (Scene Intelligent Auto)
76
You can shoot while viewing the image on the LCD monitor. This is
called “Live View shooting”. For details, see page 195.
1Display the Live View image on
the LCD monitor.
Press the <A> button.
XThe Live View image will appear on
the LCD monitor.
2Focus on the subject.
Press the shutter button halfway to
focus.
XWhen focus is achieved, the AF point
will turn green and the beeper will
sound.
3Take the picture.
Press the shutter button completely.
XThe picture is taken and the captured
image is displayed on the LCD
monitor.
XWhen the playback display ends, the
camera will return to Live View
shooting automatically.
Press the <A> button to exit the
Live View shooting.
You can also rotate the LCD monitor for different angles (p.41).
A Live View Shooting
Normal angle Low angle High angle
77
The camera analyzes the scene and sets the optimum settings
automatically. In places where flash photography is prohibited such as
in a museum or an aquarium, use the <7> (Flash Off) mode.
Prevent camera shake if the numeric display (shutter speed) in
the viewfinder blinks.
Under low light when camera shake is prone to occur, the
viewfinder’s shutter speed display will blink. Hold the camera steady
or use a tripod. When using a zoom lens, use the wide-angle end to
reduce blur caused by camera shake even with handheld shooting.
Take portraits without flash.
In low-light conditions, tell the subject to keep still until the picture is
taken. Any movement by the subject during shooting may result in
the subject being blurred in the picture.
7 Shooting When You Cannot Use Flash
Shooting Tips
78
<C> is a fully-automatic shooting mode that is a step more advanced
from <A>. You can adjust the photo’s ambience, background blur, etc.
before shooting.
By pressing the <Q> button, you can set 1. Ambience-based shots, 2.
Background blur setting, 3. Drive mode, and 4. Built-in flash firing with
Quick Control.
*<C> stands for Creative Auto.
1Set the Mode Dial to <C>.
2Press the <Q> button (7).
XThe Quick Control screen will appear.
3Set the desired functions.
Press the <V> cross keys to select a
function.
XThe settings of the selected function
and Feature guide (p.56) will appear.
For the setting procedure and details
on each function, see pages 79-84.
4Take the picture.
Press the shutter button completely to
take the picture.
C Creative Auto Shooting
79
C Creative Auto Shooting
If you set (1) or (2) when the camera is set for Live View shooting, you
can see the effect on the screen before you start shooting.
(1) Ambience-based shots
You can select and shoot with the ambience you want to convey in
your images. Turn the <6> dial to select the ambience. You can
also select it from a list by pressing <0>. For details, see page
82.
Shutter speed
(1)
(2)
Battery level Possible shots
ISO speed
Aperture
(4)
(3)
Image-recording quality
C Creative Auto Shooting
80
(2) Background blur
• If [OFF] is set, the degree of background blur will change
depending on the brightness.
• If it is set to any setting other than [OFF], you can adjust the
background blur regardless of the brightness.
• The further you move the cursor to the right with the <6> dial,
the sharper the background will look in the picture.
• The further you move the cursor to the left with the <6> dial, the
more blurred the background around the subject will be. Note that
depending on the speed of the lens (f/number), certain slider
adjustments may not be selectable (indicated by •).
• When operating the <6> dial during Live View shooting,
[Simulating blur] will be displayed on the LCD monitor. You can
see the degree of front and background blur in contrast with the
subject that is focused on during setting operation (while
[Simulating blur] is being displayed).
• If you want to blur the background, see “Shooting Portraits” on
page 87.
• Depending on the lens used and shooting conditions, the
background may not look so blurred.
• This function cannot be set if you use flash. If <a> is set and you
set background blur, <b> will be set automatically.
If [Simulating blur] is enabled during Live View shooting, the image
displayed with <g> (p.199) blinking may have more noise than the actual
image being recorded, or it may look dark.
81
C Creative Auto Shooting
(3) Drive mode: Use the <6> dial to make the selection. You can also
select it from a list by pressing <0>.
<u>Single shooting:
Shoot one image at a time.
<i>Continuous shooting:
While you hold down the shutter button completely, shots will
be taken continuously. You can shoot up to approx. 5.0 shots
per second.
<m> <Q>Self-timer: 10 sec./remote control
(when Wireless Remote Control BR-E1 (sold separately) is
used):
The picture is taken 10 seconds after you press the shutter
button. Remote control shooting using the BR-E1 is also
possible.
<l>Self-timer: 2 sec.:
The picture is taken 2 seconds after you press the shutter
button.
<q>Self-timer: Continuous:
Press the <W> <X> keys to set the number of multiple shots
(2 to 10) to be taken with the self-timer. 10 seconds after you
press the shutter button, the set number of multiple shots are
taken.
(4) Built-in flash firing: Turn the <6> dial to select the desired
setting. You can also select it from a list by pressing <0>.
<a>Auto built-in flash: The flash fires automatically as
necessary.
<D>Built-in flash on : The flash fires at all times.
<b>Built-in flash off : The flash is disabled.
When using the self-timer, see the notes on page 126.
For remote control shooting, see page 382.
When the camera is paired with BR-E1, <m> will change into <Q>
(p.384).
When using <b>, see “Shooting When You Cannot Use Flash” on page
77.
C Creative Auto Shooting
82
1Display the Live View image.
Press the <A> button to display the
Live View image.
2With Quick Control, select the
desired ambience.
Press the <Q> button (7).
Press the <W> <X> keys to select
[1 Ambience: Standard].
[Ambience-based shots] will appear
on the screen.
Press the <Y> <Z> keys to select
the desired ambience.
XThe LCD monitor will display how the
image will look with the selected
ambience.
Shooting with Ambience Selection
Ambience Ambience Effect
1 Ambience: Standard No setting
2 Vivid Low / Standard / Strong
3 Soft Low / Standard / Strong
4 Warm Low / Standard / Strong
5 Intense Low / Standard / Strong
6 Cool Low / Standard / Strong
7 Brighter Low / Medium / High
8 Darker Low / Medium / High
9 Monochrome Blue / B/W / Sepia
83
C Creative Auto Shooting
3Set the ambience effect.
Press the <W> <X> keys to select
the effect so that [Effect] appears at
the bottom of the screen.
Press the <Y> <Z> keys to select
the desired effect.
4Take the picture.
Press the shutter button completely to
take the picture.
To return to viewfinder shooting,
press the <A> button to exit Live
View shooting. Then press the shutter
button completely to take the picture.
If you change the shooting mode or
set the power switch to <2>, the
setting will revert back to [1
Ambience: Standard].
The Live View image shown with the ambience setting applied will not
look exactly the same as the captured image.
The ambience effect may be reduced in flash photography.
In bright outdoors, the Live View image you see on the LCD monitor may
not have exactly the same brightness or ambience as with the actual
captured image. Set [52: LCD brightness] to 4, and look at the Live
View image, preventing the outside light from affecting the image
viewing.
If you do not want the Live View image to be displayed when setting this
function, start the operation from step 2.
C Creative Auto Shooting
84
1Ambience: Standard
This provides standard image characteristics.
2Vivid
The subject looks crisp, sharp and vivid. Effective for making the
picture look more impressive than with [1 Ambience: Standard].
3Soft
The subject is less defined, giving the picture a softer and daintier
look. Good for portraits, pets, flowers, etc.
4Warm
The subject is less defined with a warmer color cast, giving the
picture a warmer and gentler look. Good for portraits, pets, and other
subjects to which you want to give a warm look.
5Intense
While the overall brightness is slightly lowered, the subject is
emphasized for a more intense feeling in the picture. Effective for
making the human or living subject stand out more.
6Cool
The overall brightness is slightly lowered with a cooler color cast in
the picture. Effective for making a subject in the shade look more
calm and impressive.
7Brighter
The picture looks brighter.
8Darker
The picture looks darker.
9Monochrome
The picture becomes monochrome. You can select the monochrome
color to be blue, black and white, or sepia.
Ambience Settings
85
The camera will automatically choose the appropriate settings when
you select a shooting mode for your subject or scene.
*<8> stands for Special Scene.
1Set the Mode Dial to <8>.
2Press the <Q> button.
3Select a shooting mode.
Press the <W> <X> keys to select
the desired shooting mode, then
press <0>.
You can also select by turning the
<6> dial.
8: Special Scene Mode
87
The <2> (Portrait) mode blurs the background to make the human
subject stand out. It also makes skin tones and hair look softer.
Select the location where the distance between the subject and
the background is the farthest.
The further the distance between the subject and background, the
more blurred the background will look. The subject will also stand
out better against an uncluttered dark background.
Use a telephoto lens.
If you have a zoom lens, use the telephoto end to fill the frame with
the subject from the waist up. Move in closer as necessary.
Focus on the face.
Check that the AF point covering the face lights up. For close-ups of
the face, focus on the eyes.
2 Shooting Portraits
Shooting Tips
アテ
The default setting is <i> (Continuous shooting). If you keep holding down
the shutter button, you can shoot continuously (max. approx. 5.0 shots/sec.)
to capture changes in the subject’s facial expression and pose.
88
Use the <q> (Group Photo) mode to shoot group photos. You can take
a picture in which both the people in the front and people in the back are
all in focus.
Use a wide-angle lens.
When using a zoom lens, use the wide-angle end to make it easy to
get all the people in the group in focus at once, from the front row to
the back. Also, if you place a little distance between the camera and
the subjects (so that the subjects’ entire bodies are in the shot), the
focus range increases in depth.
Take multiple shots of the group.
It is recommended to shoot multiple photos in case some people
close their eyes.
q Shooting Group Photos
Shooting Tips
See the cautions on page 98.
When shooting indoors or in low-light, hold the camera steady or use a
tripod to prevent camera shake.
You can adjust the image brightness with [Brightness].
89
Use the <3> (Landscape) mode for wide scenery or to have
everything in focus from near to far. For vivid blues and greens, and
very sharp and crisp images.
With a zoom lens, use the wide-angle end.
When using a zoom lens, set the lens to the wide-angle end to make
the objects near and far in focus. It also adds breadth to landscapes.
Shooting night scenes.
The <3> mode is also good for night scenes because it disables
the built-in flash. When shooting night scenes, use a tripod to
prevent camera shake.
3 Shooting Landscapes
Shooting Tips
The built-in flash will not fire even in backlit or low-light conditions.
If you are using an external Speedlite, the Speedlite will fire.
90
Use the <5> (Sports) mode to shoot a moving subject, such as a
running person or a moving vehicle.
Use a telephoto lens.
Use of a telephoto lens is recommended for shooting from a
distance.
Use the center AF point to focus.
Aim the center AF point over the subject, then press the shutter
button halfway to autofocus. During autofocusing, the beeper will
continue beeping softly. If focus cannot be achieved, the focus
indicator <o> will blink.
The default setting is <i> (Continuous shooting). At the decisive
moment, press the shutter button completely to take the picture. If
you keep holding down the shutter button, you can shoot
continuously while maintaining autofocus to capture changes in the
subject’s movement.
5 Shooting Moving Subjects
Shooting Tips
The built-in flash will not fire even in backlit or low-light conditions.
Under low light where camera shake tends to occur, the viewfinder’s
shutter speed display on the bottom left will blink. Hold the camera
steady and shoot.
If you are using an external Speedlite, the Speedlite will fire.
91
When you want to continuously focus on and photograph children
running around, use <C> (Kids). Skin tones will look healthy.
Use the center AF point to focus.
Aim the center AF point over the subject, then press the shutter
button halfway to autofocus. During autofocusing, the beeper will
continue beeping softly. If focus cannot be achieved, the focus
indicator <o> will blink.
Shoot continuously.
The default setting is <i> (Continuous shooting). At the decisive
moment, press the shutter button completely to take the picture. If
you keep holding down the shutter button, you can shoot
continuously while maintaining autofocusing to capture changes in
the subject’s facial expression and movement.
C Photographing Children
Shooting Tips
While the flash is recharging, “DbuSY” is displayed in the viewfinder, and
a picture cannot be taken. Take the picture after this display turns off.
See the cautions on page 98.
92
When you want to shoot flowers or small things up close, use the <4>
(Close-up) mode. To make small things appear much larger, use a
macro lens (sold separately).
Use a simple background.
A simple background makes small objects such as flowers stand out
better.
Move in as close as possible to the subject.
Check the lens for its minimum focusing distance. Some lenses
have indications such as <0.25m/0.8ft> on them. The lens minimum
focusing distance is measured from the <V> (focal plane) mark on
the top of the camera to the subject. If you are too close to the
subject and focus cannot be achieved, the focus indicator <o> will
blink.
If the built-in flash is fired and the bottom part of the picture comes
out unnaturally dark, move away a little from the subject and try
again.
With a zoom lens, use the telephoto end.
When using a zoom lens, using the telephoto end will make the
subject look larger.
4 Shooting Close-ups
Shooting Tips
93
When shooting food, use <P> (Food). The photo will look bright and
appetizing. Also, depending on the light source, the reddish tinge will be
suppressed in the pictures taken under tungsten lights, etc.
Change the color tone.
You can change [Color tone]. To increase the food’s reddish tinge,
set it toward [Warm]. Set it toward [Cool] if it looks too red.
Avoid using flash.
If you use flash, the light may reflect off the dish or food and results
in unnatural shadows. Therefore, <b> (Built-in flash off) is set by
default. Try to prevent camera shake when shooting in low-light
locations.
P Shooting Food
Shooting Tips
Since this mode lets you shoot the food in appetizing color tones, human
subjects may be photographed with an unsuitable skin tone.
The warm color cast of subjects may fade.
When multiple light sources are included on the screen, the warm color
cast of the picture may not be reduced.
If you use flash, the [Color tone] setting will switch to the standard.
94
When you want to photograph a human subject lit in candlelight, use
<x> (Candlelight). The atmosphere of candlelight is reflected in the
color tones of the picture.
Use the center AF point to focus.
Aim the center AF point in the viewfinder over the subject, then
shoot.
Prevent camera shake if the numeric display (shutter speed) in
the viewfinder blinks.
Under low light, the viewfinder’s shutter speed display will blink.
Hold the camera steady or use a tripod. When using a zoom lens,
you can reduce the blur caused by camera shake by setting the lens
to the wide-angle end.
Change the color tone.
You can change [Color tone]. To increase the candlelight’s reddish
tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red.
x Shooting Candlelight Portraits
Shooting Tips
Live View shooting is not possible.
Flash photography is not possible. In low light, the AF-assist beam may
be emitted (p.117).
95
When you want to photograph people at night and obtain a natural-
looking night scene in the background, use the <6> (Night Portrait)
mode. Using a tripod is recommended.
Use a wide-angle lens and a tripod.
When using a zoom lens, use the wide-angle end to obtain a wide
night view. Also, since camera shake is prone to occur with
handheld shooting, use a tripod.
Check the subject’s brightness.
Under low light, the built-in flash will fire automatically to obtain a
good exposure of the subject.
Note that it is recommended to play back the captured image on
location to check the image brightness. If the subject looks dark,
move nearer and shoot again.
Also shoot in other shooting modes.
Since camera shake is prone to occur with night shots, shooting also
with <A> and <F> is recommended.
6
Shooting Night Portraits (With a Tripod)
Shooting Tips
Tell the subject to keep still even after the flash fires.
If you use the self-timer together with flash, the self-timer lamp will light
up briefly after the picture is taken.
See the cautions on page 98.
96
Using a tripod when shooting a night scene gives the best results.
However, the <F> (Handheld Night Scene) mode enables you to shoot
night scenes even while handholding the camera. In this shooting
mode, four shots are taken consecutively for each picture, and the
resulting one image with reduced camera shake is recorded.
Hold the camera firmly.
During shooting, hold the camera firmly and steadily. In this mode,
four shots are aligned and merged into a single image. However, if
there is significant misalignment in any of the four shots due to
camera shake, they may not align properly in the final image.
For shots including people, fire the flash.
If you are to include people in the night scene shot, press the <Q>
button to set <D> (Built-in flash on). To take a nice portrait, the first
shot will use flash. Tell the subject not to move until all four
consecutive shots are taken.
F Shooting Night Scenes (Handheld)
Shooting Tips
Compared to other shooting modes, the shooting range will be smaller.
See the cautions on pages 98-99.
97
When shooting a scene having both the bright and dark areas, use the
<G> (HDR Backlight Control) mode. When you take one picture in this
mode, three consecutive shots are taken at different exposures. This
results in one image, with a wide tonal range, that has minimized the
clipped shadows caused by backlighting.
Hold the camera firmly.
During shooting, hold the camera firmly and steadily. In this mode,
three shots are aligned and merged into a single image. However, if
there is significant misalignment in any of the three shots due to
camera shake, they may not align properly in the final image.
G Shooting Backlit Scenes
Shooting Tips
Compared to other shooting modes, the shooting range will be smaller.
Flash photography is not possible. In low light, the AF-assist beam may
be emitted (p.117).
See the cautions on page 99.
HDR stands for High Dynamic Range.
98
Cautions for <q> Group Photo
Since distortion correction is applied, the camera records an image area
narrower than the one seen through the viewfinder. (The image
periphery is slightly trimmed and the resolution looks slightly lowered.)
Also, during Live View shooting, the angle of view changes slightly.
Cautions for <C> Kids
During Live View shooting, if flash is fired in continuous shooting, the
continuous shooting speed will decrease. Even if the flash is not fired for
subsequent shots, shooting will still be performed with the decreased
continuous shooting speed.
Cautions for <6> Night Portrait and <F> Handheld Night Scene
During Live View shooting, achieving focus may be difficult with point
sources of light, such as may be found in a night scene. In such a case,
set the lens’s focus mode switch to <MF> and focus manually.
The Live View image displayed will not look exactly the same as the
actual captured image.
Cautions for <6> Night Portrait
During Live View shooting, achieving focus may be difficult when the
face of the subject looks dark. In such a case, set the lens’s focus mode
switch to <MF> and focus manually.
99
Cautions for <F> Handheld Night Scene and <G> HDR Backlight
Control
You cannot select 1+73 or 1. If 1+73 or 1 is set, the image
will be recorded in 73 quality.
If you shoot a moving subject, the subject’s movement may leave
afterimages, or the surrounding area of the subject may become dark.
The image alignment may not function properly with repetitive patterns
(lattice, stripes, etc.), flat or single-tone images, or images significantly
misaligned due to camera shake.
It takes some time to record images to the card since they are merged
after shooting. During the image processing, “buSY” will be displayed in
the viewfinder, and you cannot take another picture until the processing
is complete.
Cautions for <F> Handheld Night Scene
In flash photography, if the subject is too close to the camera, the picture
may come out extremely bright (overexposure).
In flash photography, if you shoot a night scene with limited lights, the
shots may not align correctly. This may result in a blurry picture.
In flash photography, if the human subject is close to the background that
is also illuminated by the flash, the shots may not align correctly. This
may result in a blurry picture. Unnatural shadows and unsuitable colors
may also appear.
Flash coverage angle with an external Speedlite:
• When using a Speedlite with automatic flash coverage setting, the
zoom position will be fixed to the wide (wide-angle) end regardless of
the lens’s zoom position.
• When using a Speedlite requiring manual flash coverage setting, set
the flash head to the normal position.
Cautions for <G> HDR Backlight Control
The image may not be rendered with a smooth gradation and may look
irregular or have significant noise.
HDR Backlight Control may not be effective for excessively backlit
scenes or extremely high-contrast scenes.
When shooting subjects that are sufficiently bright as they are, for
example for normally lit scenes, the image may look unnatural due to the
HDR effect.
100
In the <v> (Creative filter) mode, you can apply one of ten filter effects
(Grainy B/W*, Soft focus*, Fish-eye effect*, Water painting effect*, Toy
camera effect*, Miniature effect*, HDR art standard, HDR art vivid, HDR
art bold, and HDR art embossed) for shooting. When the camera is set
for Live View shooting, you can see the effect on the screen before you
start shooting. The camera saves only the image with the Creative filter
effects applied.
For the effects marked with an asterisk, you can also take a picture without a
Creative filter, then apply the effect afterward and save it as a new image (p.356).
1Set the Mode Dial to <v>.
2Display the Live View image.
Press the <A> button to display the
Live View image.
3Select [Creative filters] with Quick
Control.
Press the <Q> button (7).
Press the <W> <X> keys to select
[G] on the upper left of the screen,
then press <0>.
v Shooting with Creative Filter Effects
If you do not want the Live View image to be displayed when setting
functions, press the <Q> button after step 1 and select [Choose filter].
101
v Shooting with Creative Filter Effects
4Select a shooting mode.
Press the <W> <X> keys to select a
shooting mode, then press <0>.
XThe image will be displayed with the
effects of the filter applied.
Available Shooting Modes in the v Mode
5Adjust the effect.
Press the <Q> button and select the
icon below [Creative filters] (except
for c, A, B, C, and D).
Press the <Y> <Z> keys to adjust
the filter effect, then press <0>.
6Take the picture.
Press the shutter button completely to
take the picture.
To return to viewfinder shooting,
press the <A> button to exit Live
View shooting. Then press the shutter
button completely to take the picture.
Shooting Mode Page Shooting Mode Page
GGrainy B/W p.102 cMiniature effect p.103
WSoft focus p.102 AHDR art standard p.103
XFish-eye effect p.102 BHDR art vivid p.103
ZWater painting effect p.103 CHDR art bold p.104
HToy camera effect p.103 DHDR art embossed p.104
v Shooting with Creative Filter Effects
102
G Grainy B/W
Creates a grainy black-and-white photo. You can change the black-
and-white effect by adjusting the contrast.
W Soft focus
Gives the image a soft look. You can change the degree of softness
by adjusting the blur.
X Fish-eye effect
Gives the effect of a fish-eye lens. The image will have a barrel-type
distortion.
Depending on the level of this filter effect, the area trimmed along
the periphery of the image changes. Also, since this filter expands
the center part of the image, the resolution at the center may
decrease depending on the number of recorded pixels. Check the
image on the screen when setting this filter. The AF point will be
fixed to the one at the center.
Creative Filter Characteristics
You cannot select 1+73 or 1. If 1+73 or 1 is set, the image
will be recorded in 73 quality.
When <G>, <W>, <X>, <Z>, <H>, or <c> is set, continuous
shooting cannot be set.
Dust Delete Data (p.304) will not be appended to images shot with Fish-
eye effect applied.
<c> is set to <b> (Flash Off) by default. Try to prevent camera shake
when shooting in low-light conditions.
During Live View Shooting
With Grainy B/W, the grainy effect displayed on the LCD monitor will look
different from the grainy effect recorded in the picture.
With the Soft focus and Miniature effects, the blurred effect displayed on
the LCD monitor may look different from the blurred effect recorded in
the picture.
The histogram is not displayed.
Magnified view is not possible.
In Creative Zone modes, you can set some Creative filters with Quick
Control (p.205).
103
v Shooting with Creative Filter Effects
Z Water painting effect
Makes the photo look like a watercolor painting with soft colors. You
can control the color density by adjusting the filter effect. Note that
night scenes or dark scenes may not be rendered with a smooth
gradation and may look irregular or have significant noise.
H Toy camera effect
Darkens the photo’s corners and applies a unique color tone that
makes it look as if it was shot by a toy camera. You can change the
color cast by adjusting the color tone.
c Miniature effect
Creates a diorama effect.
If you want the image center to look sharp, take the picture without
changing any setting.
To move the area that looks sharp (miniature effect frame) in Live
View shooting, see “Adjusting Miniature Effect” (p.105). The AF
method will be Live 1-point AF. Positioning the miniature effect frame
over the AF point before shooting is recommended.
During viewfinder shooting, aim the center AF point over the subject
and shoot.
A HDR art standard
Clipped highlights and shadows will be reduced. The low contrast
and flat gradation create a painting-like effect. The subject outlines
will have bright (or dark) edges.
B HDR art vivid
The colors are more saturated than with [HDR art standard], and
the low contrast and flat gradation create a graphic art effect.
For <A> <B> <C> <D>, clipped highlights and shadows will be
reduced for a high dynamic range of tones even with high-contrast scenes.
Three images of different exposures are captured continuously for
each shot and merged into a single image. See the cautions on
page 104.
v Shooting with Creative Filter Effects
104
C HDR art bold
The colors are the most saturated, making the subject pop out, and
the picture looks like an oil painting.
D HDR art embossed
The color saturation, brightness, contrast and gradation are
decreased to make the picture look flat. The picture looks faded and
old. The subject outlines will have bolder bright (or dark) edges.
Cautions for <A> HDR Art Standard, <B> HDR Art Vivid,
<C> HDR Art Bold, and <D> HDR Art Embossed
Compared to other shooting modes, the image area will be smaller.
The Live View image displayed with the filter applied will not look exactly
the same as the actual captured image.
If you shoot a moving subject, the subject’s movement may leave
afterimages, or the surrounding area of the subject may become dark.
The image alignment may not function properly with repetitive patterns
(lattice, stripes, etc.), flat or single-tone images, or images significantly
misaligned due to camera shake.
If you are handholding the camera, try to prevent camera shake when
shooting.
The color gradation of the sky or white walls may not be reproduced
correctly. Irregular exposure, irregular colors, or noise may appear.
Shooting under fluorescent or LED lighting may result in unnatural color
reproduction of the illuminated areas.
It takes some time to record images to the card since they are merged
after shooting. During the image processing, “buSY” will be displayed in
the viewfinder, and you cannot take another picture until the processing
is complete.
Flash photography is not possible. Note that in low light, the AF-assist
beam may be emitted (p.117).
105
v Shooting with Creative Filter Effects
1Move the AF point.
Move the AF point to where you want
to focus on.
XIf the AF point is not fully covered by
the miniature effect frame, the [r]
icon on the bottom right of the screen
will blink. In the next step, adjust the
position of the miniature effect frame
so that it covers the AF point.
2Move the miniature effect frame.
Press the <u> button (or tap on the
[r] icon at the bottom right of the
screen). The miniature effect frame
will turn orange and can be moved.
Press the <B> button (or tap on
the [T] icon at the bottom left of the
screen) to switch between the vertical
and horizontal orientations of the
miniature effect frame.
Press <0> to set the position of
the miniature effect frame.
Press <W> <X> or <Y> <Z> to
move the AF point or miniature effect
frame. Press the <L> button to
return the AF point or miniature effect
frame to the screen center.
3Take the picture.
Adjusting Miniature Effect
106
In Basic Zone modes, pressing the <Q> button sets the camera to the
Quick Control state and enables you to set the items shown in the
tables on pages 107-108.
1Set the Mode Dial to a Basic Zone
mode.
2Press the <Q> button (7).
XThe Quick Control screen will appear.
3Set the desired functions.
Press the <V> cross keys to select a
function. (This procedure is not
necessary in the 7 mode.)
XThe settings of the selected function
and Feature guide (p.56) will appear.
Turn the <6> dial to change the
setting.
You can also select from a list by
selecting a function and pressing
<0>.
When [s: Shooting screen: Standard] is set, a screen such as
the following will appear.
Q Quick Control
Example: <C>
Example: <C>
107
Q Quick Control
Settable Functions in Basic Zone Modes
o: Default setting* k: User selectable : Not selectable
* If you change the shooting mode or set the power switch to <2>, all the
functions will revert to the default settings (except the self-timer).
Function A 7 C8
2 q 3 5
Drive
mode
(p.123)
u: Single shooting o o o k o o k
i: Continuous shooting k k k o k k o
m/Q: Self-timer: 10 sec./
remote control kkkkkkk
l: 2sec. kkkkkkk
q: Continuous shooting kkkkkkk
Built-in
flash firing
a: Automatic firing o o o o
D: Flash on (Fires at all times) k k k k
b: Flash off k o k k k o o
Ambience-based shots (p.82) k
Background blur (p.80) k
Brightness (p.109) kkkk
Function 8
C 4 P x 6 F G
Drive
mode
(p.123)
u: Single shooting koooooo
i: Continuous shooting o k k k k k k
m/Q: Self-timer: 10 sec./
remote control kkkkkkk
l: 2sec. kkkkkkk
q: Continuous shooting kkkkkkk
Built-in
flash firing
a: Automatic firing o o o
D: Flash on (Fires at all times) k k k k
b: Flash off k k o o o o
Brightness (p.109) k k k k k k
Color tone (p.93, 94) k k
Q Quick Control
108
o: Default setting* k: User selectable : Not selectable
* If you change the shooting mode or set the power switch to <2>, all the
functions will revert to the default settings (except the self-timer).
Function v
G W X Z H
Drive
mode
(p.123)
u: Single shooting o o o o o
i: Continuous shooting
m/Q: Self-timer: 10 sec./
remote control k k k k k
l: 2sec. k k k k k
q: Continuous shooting k k k k k
Built-in
flash firing
a: Automatic firing o o o o o
D: Flash on (Fires at all times) k k k k k
b: Flash off k k k k k
Adjustment of effects (p.100) k k k k k
Function v
cA B C D
Drive
mode
(p.123)
u: Single shooting o o o o o
i: Continuous shooting k k k k
m/Q: Self-timer: 10 sec./
remote control k k k k k
l: 2sec. k k k k k
q: Continuous shooting k k k k k
Built-in
flash firing
a: Automatic firing k
D: Flash on (Fires at all times) k
b: Flash off o o o o o
Adjustment of effects (p.100)
109
In Basic Zone modes, when a mode other than <A>, <7>, <C>,
<8: G>, or <v> is set, you can adjust the brightness for shooting.
You can adjust both the brightness and darkness across 3-step ranges
with 0 being the standard.
1Set the Mode Dial to <8:
2q35C4Px6F>.
Set to any mode other than <G>.
2Display the Live View image.
Press the <A> button to display the
Live View image (except <x>).
3With Quick Control, select the
desired brightness.
Press the <Q> button (7).
Press the <W> <X> keys to select
[wBrightness], then press the
<Y> <Z> keys to select the desired
brightness.
X
The image with the selected brightness
adjustment applied will appear.
4Take the picture.
Press the shutter button completely to take the picture.
To return to viewfinder shooting, press the <A> button to exit
Live View shooting. Then press the shutter button completely to
take the picture.
If you change the shooting mode or set the power switch to
<2>, the setting will revert to [0] (standard).
Adjusting the Brightness
If you do not want the Live View image to be displayed when setting
functions, start the procedure from step 3.
110
The easiest way to play back images is described below. For more
details on the playback procedure, see page 309.
1Play back the image.
Press the <x> button.
XThe last image captured or played
back will appear.
2Select an image.
To play back images starting with the
last image captured, press the <Y>
key. To play back images starting with
the first captured image, press the
<Z> key.
Each time you press the <B>
button, the display will change.
x Image Playback
No information Basic information
display
Shooting information display
111
x Image Playback
3Exit the image playback.
Press the <x> button to exit the
image playback and return to
shooting-ready state.
With the shooting information screen displayed (p.110), you can press
the <W> <X> keys to change the shooting information displayed at the
screen bottom as follows. For details, see pages 350-351.
Shooting Information Display
Detailed information
Lens / Histogram information
White balance information
Picture Style information 1
Lens aberration correction information
Color space / Noise reduction information
Picture Style information 2
The information displayed varies depending on the shooting mode and
settings.
If you use GPS Receiver GP-E2 or a smartphone to record GPS
information for the image, the “GPS information” screen will also appear.
112
113
3
Setting the AF and
Drive Modes
The AF points in the viewfinder are
arranged to make AF shooting
suitable for a wide variety of
subjects and scenes.
You can also select the AF operation and drive mode
that best match the shooting conditions and subject.
The O icon at the upper right of the page title indicates that
the function is available only in Creative Zone modes
(p.31).
In Basic Zone modes, the AF operation is set automatically.
<AF> stands for autofocus. <MF> stands for manual focus.
114
You can select the AF (autofocus) operation characteristics to suit the
shooting conditions or subject. In Basic Zone modes, the optimum AF
operation is set automatically for the respective shooting mode.
1Set the lens focus mode switch to
<AF>.
2Turn the Mode Dial to a Creative
Zone mode.
3Select [AF operation].
Under the [z1] tab, select [AF
operation], then press <0>.
X[AF operation] will appear.
4Select the AF operation.
Press the <Y> <Z> keys to select
the desired AF operation, then press
<0>.
5Focus on the subject.
Aim the AF point over the subject and
press the shutter button halfway. The
camera will then autofocus in the
selected AF operation.
f: Changing the Autofocus OperationN
115
f: Changing the Autofocus OperationN
Suited for still subjects. When you
press the shutter button halfway, the
camera will focus only once.
The dot inside the AF point achieving
focus lights up briefly in red, and the
focus indicator <o> in the viewfinder
will also light up.
With evaluative metering, the
exposure setting will be set at the
same time focus is achieved.
While you keep holding down the shutter button halfway, the focus
will be locked. You can then recompose the shot if desired.
One-Shot AF for Still Subjects
Focus indicator
AF point
If focus cannot be achieved, the focus indicator <o> in the viewfinder
will blink. If this occurs, the picture cannot be taken even if the shutter
button is pressed completely. Recompose the shot or see “Subjects
Difficult to Focus on” (p.121) and try to focus again.
If [53: Beep] is set to [Disable], the beeper will not sound when focus is
achieved.
After achieving focus with One-Shot AF, you can lock the focus on a
subject and recompose the shot. This is called “focus lock”. This is useful
when you want to focus on a peripheral subject.
When a lens equipped with an electronic manual focusing function is
used, see page 118.
f: Changing the Autofocus OperationN
116
This AF operation is suited for moving subjects when the focusing
distance keeps changing. While you hold down the shutter button
halfway, the camera will keep focusing on the subject
continuously.
The exposure is set at the moment the picture is taken.
When the AF point selection (p.119) is automatic, the camera first
uses the center AF point to focus. During autofocusing, if the subject
moves away from the center AF point, focus tracking continues as
long as the subject is covered by another AF point.
AI Focus AF switches the AF operation from One-Shot AF to AI
Servo AF automatically if a still subject starts moving.
After the subject is in focus in One-Shot AF, if the subject starts
moving, the camera will detect the movement, change the AF
operation automatically to AI Servo AF, and start tracking the moving
subject.
AI Servo AF for Moving Subjects
AI Focus AF for Switching the AF Operation Automatically
With AI Servo AF, the beeper will not sound even when focus is achieved.
Also, the focus indicator <o> in the viewfinder will not light up.
When focus is achieved with AI Focus AF with the Servo operation active,
the beeper will continue beeping softly. However, the focus indicator <o> in
the viewfinder will not light up. Note that focus lock is not possible in this
case.
117
f: Changing the Autofocus OperationN
Under low-light conditions, when you press the shutter button halfway,
the built-in flash may fire a brief burst of flashes. This illuminates the
subject to help autofocusing.
AF-Assist Beam with the Built-in Flash
AF-assist beam will not be emitted from the built-in flash in <7> <8:
5C> modes.
AF-assist beam will not be emitted from the built-in flash when [Built-in
flash firing] is set to <b> in <A>, <C>, <8: 2q4PF>, or
<v: GWXZHc> mode.
The AF-assist beam will not be emitted with AI Servo AF operation.
The built-in flash makes a sound when firing continuously. This is normal
and not a malfunction.
The effective range of the AF-assist beam emitted by the built-in flash is
approx. 4 meters / 13.1 feet.
In Creative Zone modes, when you raise the built-in flash with the <D>
button, the AF-assist beam will be emitted as necessary. Note that
depending on the setting for [5: AF-assist beam firing] under [54:
Custom Functions (C.Fn)], AF-assist beam will not be emitted (p.368).
f: Changing the Autofocus OperationN
118
With the following USM and STM lenses equipped with electronic
manual focusing function, you can set whether to use electronic manual
focusing in One-Shot AF mode. The default setting is [Disable after
One-Shot AF].
* As of the product’s release date.
1Select [Lens electronic MF].
Under the [z1] tab, select [Lens
electronic MF], then press <0>.
2Set the desired setting.
Select the setting, then press <0>.
Disable after One-Shot AF
Manual focus adjustment after the AF operation is disabled.
Enable after One-Shot AF
You can manually adjust the focus after the AF operation if you keep
holding down the shutter button halfway.
3 Setting Lens Electronic MF
EF-S18-135mm f/3.5-5.6 IS USM
EF300mm f/2.8L USM EF1200mm f/5.6L USM
EF50mm f/1.0L USM EF400mm f/2.8L USM EF28-80mm f/2.8-4L USM
EF85mm f/1.2L USM EF400mm f/2.8L II USM
EF70-300mm f/4-5.6 IS II USM
EF85mm f/1.2L II USM EF500mm f/4.5L USM
EF200mm f/1.8L USM EF600mm f/4L USM
EF-S24mm f/2.8 STM EF-S18-55mm f/4-5.6 IS STM EF50mm f/1.8 STM
EF-S35mm f/2.8 Macro IS STM
EF-S18-135mm f/3.5-5.6 IS STM
EF24-105mm f/3.5-5.6 IS STM
EF-S10-18mm f/4.5-6.3 IS STM EF-S55-250mm f/4-5.6 IS STM
EF-S18-55mm f/3.5-5.6 IS STM
EF40mm f/2.8 STM
119
When <8: x> or <v: Xc> mode is set, since the camera
automatically focuses on the closest subject in normal cases, it may not
always focus on your desired subject.
In any other mode, you can select one AF point to focus solely on the
subject that AF point is aimed over.
1Press the <S> button (9).
XThe selected AF point will be
displayed on the LCD monitor and in
the viewfinder.
2Select the AF point.
Use the <V> cross keys to select the
AF point.
To select the AF point while looking in
the viewfinder, turn the <6> dial to
switch the point lit in red.
When all the AF points light up,
automatic AF point selection will be
set. The AF point will be selected
automatically to focus on the subject.
Pressing <0> toggles the AF point
selection between the center AF point
and automatic AF point selection.
3Focus on the subject.
Aim the selected AF point over the
subject and press the shutter button
halfway to focus.
S Selecting the AF Point
You can also tap on the LCD monitor screen to select the AF point.
During manual AF point selection, tapping on the [ ] icon at the
bottom left of the screen will switch the mode to automatic AF point
selection.
If you set [53: Switch S/A button] to [Enable], you can switch the
functions of the <S> button and <A> button.
S Selecting the AF Point
120
When shooting a portrait up close, use One-Shot AF and focus
on the eyes.
If you set the composition after focusing on the eyes of the person to
be photographed, the vivid facial expression will stand out more in
the picture.
If it is difficult to focus, select the center AF point.
The center AF point has the highest focusing performance among
the nine AF points.
When you want to keep focusing on a moving subject easily,
use automatic AF point selection and AI Servo AF in
combination (p.116).
The center AF point will first be used to focus on the subject. During
autofocusing, if the subject moves away from the center AF point,
focus tracking continues as long as the subject is covered by
another AF point.
Shooting Tips
If you use an extender (sold separately) in combination and the open
aperture f/number becomes higher than f/5.6, AF shooting will not be
possible (except in Live View shooting). For details, refer to the extender’s
instruction manual.
121
Autofocus may fail to achieve focus (focus indicator <o> in the
viewfinder blinks) with special subjects such as the following:
Subjects with very low contrast
(Example: Blue skies, solid-color flat surfaces, etc.)
Subjects in very low light
Strongly backlit or reflective subjects
(Example: Cars with highly reflective bodies, etc.)
Near and distant subjects positioned close to an AF point
(Example: Animals in cages, etc.)
Light source such as dots of light positioned close to an AF point
(Example: Night scenes, etc.)
Subjects with repetitive patterns
(Example: Skyscraper windows, computer keyboards, etc.)
Subjects with finer patterns than an AF point
(Example: Faces or flowers as small as or smaller than an AF point,
etc.)
In such cases, focus in either of the following two ways.
(1) With One-Shot AF, focus on an object at the same distance as the
subject and lock the focus, then recompose the shot (p.75).
(2) Set the lens’s focus mode switch to <MF> and focus manually.
Subjects Difficult to Focus on
Depending on the subject, focus may be achieved by slightly
recomposing the shot and performing AF operation again.
For conditions that make focusing difficult with AF during Live View
shooting or movie shooting, see page 221.
Subjects Difficult to Focus on
122
1Set the lens’s focus mode switch
to <MF>.
2Focus on the subject.
Focus by turning the lens focusing
ring until the subject looks sharp in
the viewfinder.
MF: Manual Focus
Focusing ring
If you press the shutter button halfway and focus manually, the AF point
achieving focus will light up briefly in red, and the focus indicator <o> will
light up in the viewfinder.
123
Single and continuous drive modes are provided.
1Press the <Q> button.
XThe Quick Control screen will appear.
2Select [ ].
Press the <Y> <Z> keys to select
[ ], then press <0>.
3Select the drive mode.
Press the <Y> <Z> keys to select
the desired drive mode, then press
<0>.
u:Single shooting
When you press the shutter button completely, only one shot will
be taken.
i:Continuous shooting (Max. approx. 5.0 shots/sec.)
When you press the shutter button completely, the camera will
shoot continuously while you keep holding it down.
B:Silent single shootingN
When you press the shutter button completely, only one shot will
be taken quietly.
M:Silent continuous shooting (Max. approx. 2.5 shots/sec.)N
When you press the shutter button completely, the camera will
shoot continuously quietly while you keep holding it down.
i Selecting the Drive Mode
i Selecting the Drive Mode
124
m/Q:10-sec. self-timer/remote control (when Wireless Remote
Control BR-E1 (sold separately) is used)
l:2-sec. self-timer
q:Self-timer: Continuous
For self-timer shooting, see page 125. For remote control
shooting with the BR-E1, see page 382.
i: The approx. 5.0 shots/sec. maximum high-speed continuous
shooting speed is achieved under the following conditions*: 1/500 sec. or
faster shutter speed, maximum aperture (varies depending on the lens),
fully charged battery pack, and room temperature (23°C / 73°F). The
continuous shooting speed may become slower depending on the
shutter speed, aperture, subject conditions, brightness, lens, flash use,
temperature, power source, remaining battery level, etc.
* With the AF mode set to One-Shot AF and the Image Stabilizer turned off
when using the following lenses: EF300mm f/4L IS USM, EF28-135mm f/3.5-
5.6 IS USM, EF75-300mm f/4-5.6 IS USM, EF100-400mm f/4.5-5.6L IS
USM.
With Live View shooting, the <B> and <M> cannot be set.
The continuous shooting speed may become slower if the remaining
battery level is low or if you shoot under low-light conditions.
In AI Servo AF operation, the continuous shooting speed may become
slightly slower depending on the subject conditions and the lens used.
When internal memory becomes full during continuous shooting, the
continuous shooting speed may drop off because shooting will be
temporarily disabled.
When the camera is paired with BR-E1, <
m
> will change to <
Q
>
(p.382).
125
1Press the <Q> button.
XThe Quick Control screen will appear.
2Select [ ].
Press the <Y> <Z> keys to select
[ ], then press <0>.
3Select the self-timer.
Press the <Y> <Z> keys to select
the self-timer, then press <0>.
m/Q:10 sec./remote control
self-timer
Remote control shooting with the
Wireless Remote Control BR-E1
(sold separately) is also possible
(p.382).
l:2-sec. self-timer (p.81)
q:10-sec. self-timer plus
continuous shots
Press the <W> <X> keys to set the
number of multiple shots (2 to 10) to
be taken with the self-timer.
4Take the picture.
Look through the viewfinder, focus on
the subject, then press the shutter
button completely.
XYou can check the self-timer
operation with the self-timer lamp,
beeper, and countdown display (in
seconds) on the LCD monitor.
X2 sec. before the picture is taken, the self-timer lamp will light up and
the beeper will sound faster.
j Using the Self-timer
j Using the Self-timer
126
With <q>, the interval between the multiple shots may be prolonged
depending on the shooting functions settings such as the image-
recording quality or flash.
If you do not look through the viewfinder when you press the shutter
button, attach the eyepiece cover (p.386). If stray light enters the
viewfinder when the picture is taken, it may throw off the exposure.
After taking self-timer shots, playing back the image (p.110) to check
focus and exposure is recommended.
When using the self-timer to shoot yourself, use focus lock (p.75) on an
object at the same distance as where you will stand.
To cancel the self-timer after it starts, either tap on the LCD monitor or
press <0>.
127
4
Image Settings
This chapter describes image-related function settings:
Image-recording quality, ISO speed, Picture Style, white
balance, Auto Lighting Optimizer, noise reduction, lens
aberration correction, and other functions.
The O icon at the upper right of the page title indicates that
the function is available only in Creative Zone modes
(p.31).
128
You can select the pixel count and its image quality. Nine image-
recording quality settings are provided: 73, 83, 74, 84, 7a,
8a, b, 1+73, 1.
1Select the image-recording
quality.
Under the [z1] tab, select [Image
quality], then press <0>.
X[Image quality] will appear.
2Set the image-recording quality.
Select the image-recording quality,
referring to the respective quality’s
pixel count and number of possible
shots displayed on the screen, then
press <0>.
3 Setting the Image-Recording Quality
Pixels recorded (pixel count)
Possible shots
129
3 Setting the Image-Recording Quality
Guide to Image-recording Quality Settings (Approx.)
* The file size, possible shots, and maximum burst are based on Canon’s testing
standards (3:2 aspect ratio, ISO 100 and Standard Picture Style) using an 8 GB
card. These figures vary depending on the subject, card brand, aspect
ratio, ISO speed, Picture Style, Custom Functions, and other settings.
* Figures in parentheses apply to a UHS-I class 16 GB card conforming to
Canon’s testing standards.
“Full” indicates that shooting is possible until the card no longer has any free
space (card is full).
Image Quality Pixels
Recorded
File Size
(MB)
Possible
Shots Maximum Burst
73 High
quality
JPEG
24M 7.6 950 Full (Full)
83 3.9 1840 Full (Full)
74 Medium
quality 11M 4.1 1790 Full (Full)
84 2.0 3480 Full (Full)
7a
Low
quality
5.9M 2.6 2730 Full (Full)
8a1.3 5260 Full (Full)
b3.8M 1.8 3810 Full (Full)
1+73 High
quality 24M 29.4+7.6 170 6 (6)
129.4 210 6 (6)
Even if you use a UHS-I class card, the maximum burst indicator will not
change. The maximum burst in parentheses in the table will apply instead.
3 Setting the Image-Recording Quality
130
I want to select the image-recording quality matching the paper
size for printing.
Refer to the diagram on the left when
choosing the image-recording quality. If
you want to crop the image, selecting a
higher quality (more pixels) such as 73,
83, 1+73, or 1 is recommended.
b is suitable for playing back the image
with a digital photo frame.
What’s the difference between 7 and 8?
These settings indicate the different levels of image quality caused
by different compression rates. The 7 setting produces a higher
image quality with the same number of pixels. Although 8 produces
a slightly lower image quality, this allows more images to be saved
on the card. b will be in 7 (Fine) quality.
I was able to take more shots than the number of possible shots
indicated.
Depending on the shooting conditions, you may be able to take
more shots than is indicated. On the contrary, it may also be fewer
than indicated. The number of possible shots displayed is only
approximate.
Does the camera display the maximum burst?
The maximum burst is displayed on the viewfinder’s right side. Since
it is only a single-digit indicator 0 - 9, any number higher than 8 will
be displayed only as “9”. Note that this number will also be displayed
even when no card is installed in the camera. Be careful not to shoot
without a card in the camera.
When should I use 1?
1 images must be processed on a computer. For details, see
“1” and “1+73” on the next page.
FAQ
7a
8a
b
74
84
73
83
1
+
73
1
12.7x8.9 cm/5.0x3.5 in.
Paper size
A4 (29.7x21 cm/11.7x8.3 in.)
A2 (59.4x42 cm/23.4x16.5 in.)
A3 (42x29.7 cm/
16.5x11.7 in.)
131
3 Setting the Image-Recording Quality
1 is the raw image data before it is made into 73 or other images.
1 images cannot be viewed on a computer without the use of
software, such as Digital Photo Professional (EOS software, p.444).
However, you can perform various adjustments on them that are
impossible with other image types such as 73. 1 is effective when
you want to precisely adjust the image yourself or shoot an important
subject.
1+73 records a 1 image and a 73 image with a single shot. The
two images are saved to the card simultaneously. The two images will
be saved in the same folder with the same file numbers (file extension
.JPG for JPEG and .CR2 for RAW). 73 images can be viewed or
printed even with a computer that does not have EOS software
installed.
1
1+73
1 image
73 image
File number File extension
0001 . CR2
0001 . JPG
RAW Image Processing Software
To display RAW images on a computer, using Digital Photo Professional
(hereafter DPP, EOS software) is recommended (p.444).
Previous versions of DPP Ver.4.x cannot process RAW images taken with
this camera. If a previous version of DPP Ver.4.x is installed on your
computer, obtain and install the latest version of DPP from the Canon Web
site to update it. (The previous version will be overwritten.) Note that DPP
Ver.3.x or earlier cannot process RAW images taken with this camera.
Commercially-available software may not be able to display RAW
images taken with this camera. For compatibility information, contact the
software manufacturer.
132
Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient
light level. In Basic Zone modes, the ISO speed is set automatically.
Regarding the ISO speed during movie shooting, see pages 236 and
239.
1Press the <g> button (9).
2Set the ISO speed.
While looking in the viewfinder or at
the LCD monitor, press the <Y>
<Z> keys or turn the <6> dial to
select the desired ISO speed, then
press <0>.
ISO speed can be set within ISO 100 -
ISO 25600.
With [AUTO] selected, the ISO speed
will be set automatically (p.133).
When setting under [z2: zISO
speed] (shown on the left), you can
press the <B> button to set the
ISO speed to [AUTO].
ISO Speed Guide
* High ISO speeds will result in grainier images.
g
: Setting the ISO Speed for Still Photos
N
ISO Speed Shooting Situation
(No flash) Flash Range
ISO 100 - ISO 400 Sunny outdoors
The higher the ISO speed,
the farther the effective flash
range will be (p.182).
ISO 400 - ISO 1600 Overcast skies or
evening time
ISO 1600 - ISO 25600, H Dark indoors or night
You can also set with [z2: zISO speed].
Under [54: Custom Functions (C.Fn)], if [2: ISO expansion] is set to
[1:On], “H” (equivalent to ISO 51200) can also be selected (p.366).
133
g: Setting the ISO Speed for Still PhotosN
If the ISO speed is set to [AUTO], the
actual ISO speed setting will be
displayed in the viewfinder or on the
LCD monitor when you press the
shutter button halfway.
When [AUTO] is set, the ISO speed is
indicated in whole-stop increments.
However, the ISO speed is actually
set in finer increments. Therefore, in
the image’s shooting information
(p.349), you may find an ISO speed
such as ISO 125 or ISO 640
displayed as the ISO speed.
Automatic ISO speed setting: ISO [AUTO]
Under [54: Custom Functions (C.Fn)], if [4: Highlight tone priority] is
set to [1:Enable], ISO 100 and “H” (equivalent to ISO 51200) cannot be
selected (p.367).
Shooting in high temperatures may result in images that look grainier.
Long exposures can also cause irregular colors in the image.
When you shoot at high ISO speeds, noise (such as dots of light and
banding) may become noticeable.
If you use a high ISO speed and flash to shoot a close subject,
overexposure may result.
When shooting in conditions that produce an extreme amount of noise,
such as a combination of high ISO speed, high temperature, and long
exposure, images may not be recorded properly.
As “H” (equivalent to ISO 51200) is an expanded ISO speed setting,
noise (dots of light, banding, etc.) and irregular colors will be more
noticeable, and the resolution will be lower compared to the standard
setting.
g: Setting the ISO Speed for Still PhotosN
134
For ISO Auto, you can set the maximum ISO speed limit within
ISO 400 - ISO 25600.
Under the [z2] tab, select [zISO
Auto], then press <0>. Select the
ISO speed, then press <0>.
3 Setting the Maximum ISO Speed for [AUTO]N
135
Just by selecting a preset Picture Style, you can obtain image
characteristics effectively matching your photographic expression or the
subject.
1Select [Picture Style].
Under the [z4] tab, select [Picture
Style], then press <0>.
XThe Picture Style selection screen will
appear.
2Select a Picture Style.
Select a Picture Style, then press
<0>.
XThe Picture Style will be set.
D Auto
The color tone will be adjusted automatically to suit the scene. The
colors will look vivid for blue skies, greenery and sunsets,
particularly in nature, outdoor and sunset scenes.
P Standard
The image looks vivid, sharp, and crisp. This is a general-purpose
Picture Style suitable for most scenes.
A Selecting a Picture StyleN
Picture Style Characteristics
If the desired color tone is not obtained with [Auto], use another Picture
Style.
A Selecting a Picture StyleN
136
Q Portrait
For nice skin tones. The image looks softer. Suited for close-up portraits.
By changing the [Color tone] (p.139), you can adjust the skin tone.
R Landscape
For vivid blues and greens, and very sharp and crisp images.
Effective for impressive landscapes.
u Fine Detail
Suited for detailed outline and fine texture description of the subject.
The colors will be slightly vivid.
S Neutral
Geared for users who prefer to process images with their computer.
For natural colors and subdued images with modest brightness and
color saturation.
U Faithful
Geared for users who prefer to process images with their computer.
The color of a subject that is captured in ambient light at a color
temperature of 5200K will be adjusted to match the subject’s
colorimetrical color. For subdued images with modest brightness
and color saturation.
V Monochrome
Creates black-and-white images.
W User Defined 1-3
You can register a basic style such as [Portrait], [Landscape], a
Picture Style file, etc. and adjust it as desired (p.141). With any of
the User Defined Picture Style that has not yet been set, pictures will
be taken with the same characteristics settings as with the default
settings of [Auto].
Black-and-white images shot in JPEG cannot be turned into color. Be
careful not to leave the [Monochrome] setting on when you want to shoot
photos in color again.
You can set the camera to display <i> in the viewfinder for when
[Monochrome] is set (p.369).
137
A Selecting a Picture StyleN
The Picture Style selection screen has icons for [Strength], [Fineness],
or [Threshold] for [Sharpness] as well as [Contrast] and other
parameters. The numerals indicate the values for these parameters set
for the respective Picture Style.
Symbols
Symbols
g
Sharpness
JStrength
KFineness
LThreshold
hContrast
iSaturation
jColor tone
kFilter effect (Monochrome)
lToning effect (Monochrome)
During movie shooting, “ * ” will be displayed for both [Fineness] and
[Threshold] for [Sharpness]. [Fineness] and [Threshold] will not be
applied to movies.
138
You can customize the Picture Styles. You can change or adjust the
parameter settings of Picture Styles such as [Strength], [Fineness], or
[Threshold] for [Sharpness] as well as [Contrast] and other
parameters from the default settings. To see the resulting effects, take
test shots. To customize [Monochrome], see page 140.
1Select [Picture Style].
Under the [z4] tab, select [Picture
Style], then press <0>.
XThe Picture Style selection screen will
appear.
2Select a Picture Style.
Select a Picture Style, then press the
<B> button.
3Select a parameter.
Select the parameter (such as
[Strength] of [Sharpness]) to be set,
then press <0>.
See page 139 for settings and effects.
4Set the parameter.
Press the <Y> <Z> keys to adjust
the effect of the parameter, then
press <0>.
Press the <M> button to save the
adjusted parameter settings. The
Picture Style selection screen will
reappear.
XThe value of parameter settings
different from the default will be
displayed in blue.
A Customizing a Picture StyleN
139
A Customizing a Picture StyleN
*1: Indicates the fineness of the outlines to be emphasized. The smaller the
number, the finer the outlines that can be emphasized.
*2: Sets how much the outline is emphasized based on the difference in contrast
between the subject and the surrounding area. The smaller the number, the
more the outline will be emphasized when the contrast difference is low.
However, noise tends to be more noticeable when the number is smaller.
Parameter Settings and Effects
g
Sharpness
JStrength 0: Weak outline emphasis 7: Strong outline emphasis
KFineness*1 1: Fine 5: Grainy
LThreshold*2 1: Low 5: High
h Contrast -4: Low contrast +4: High contrast
i Saturation -4: Low saturation +4: High saturation
j Color tone -4: Reddish skin tone +4: Yellowish skin tone
For movie shooting, [Fineness] and [Threshold] for [Sharpness] cannot
be set (not displayed).
By selecting [Default set.] in step 3, you can revert the parameter
settings of the respective Picture Style to their defaults.
To shoot with the Picture Style you adjusted, first select the adjusted
Picture Style, then shoot.
A Customizing a Picture StyleN
140
Besides the effects described on the preceding page such as
[Contrast], or [Strength], [Fineness] and [Threshold] for
[Sharpness], you can also set [Filter effect] and [Toning effect].
kFilter effect
With a filter effect applied to a
monochrome image, you can make
white clouds or green trees stand out
more than the original.
lToning effect
By applying a toning effect, you can
create a monochrome image in the
selected color. Effective when you want
to create more impressive images.
The following can be selected: [N:None],
[S:Sepia], [B:Blue], [P:Purple] or
[G:Green].
V Monochrome Adjustment
Filter Sample Effects
N: None Normal black-and-white image with no filter effects.
Ye: Yellow The blue sky will look more natural, and the white clouds will look
crisper.
Or: Orange The blue sky will look slightly darker. The sunset will look more
brilliant.
R: Red The blue sky will look quite dark. Fall leaves will look crisper and
brighter.
G: Green Skin tones and lips will appear muted. Green tree leaves will look
crisper and brighter.
Increasing the [Contrast] will make the filter effect more pronounced.
141
You can select a base Picture Style such as [Portrait] or [Landscape],
adjust its parameters as desired and register it under [User Def. 1],
[User Def. 2], or [User Def. 3]. Useful when you want to preset multiple
Picture Styles with different settings.
You can also adjust the parameters of a Picture Style that is registered
to the camera with EOS Utility (EOS software, p.444) here.
1Select [Picture Style].
Under the [z4] tab, select [Picture
Style], then press <0>.
XThe Picture Style selection screen will
appear.
2Select [User Def. *].
Select [User Def. *], then press the
<B> button.
3Press <0>.
With [Picture Style] selected, press
<0>.
4Select the base Picture Style.
Select the base Picture Style, then
press <0>.
To adjust the parameters of a Picture
Style registered to the camera with
EOS Utility (EOS software), select the
Picture Style here.
A Registering a Picture StyleN
A Registering a Picture StyleN
142
5Select a parameter.
Select the parameter (such as
[Strength] of [Sharpness]) to be set,
then press <0>.
6Set the parameter.
Press the <Y> <Z> keys to adjust
the effect of the parameter, then
press <0>.
For details, see “Customizing a
Picture Style” (p.138-140).
Press the <M> button to register
the adjusted parameter settings. The
Picture Style selection screen will
then reappear.
XThe base Picture Style will be
indicated on the right of [User Def. *].
If a Picture Style is already registered under [User Def. *], changing the
base Picture Style in step 4 will clear the parameter settings of the
previously registered User Defined Picture Style.
If you perform [Clear all camera settings] under [54: Clear settings]
(p.298), all the [User Def. *] styles and settings will revert to their
defaults. Any Picture Style registered via EOS Utility (EOS software) will
have only its modified parameters reverted to the default setting.
To shoot with a registered Picture Style, follow step 2 on page 135 to
select [User Def. *], then shoot.
Regarding the procedure to register a Picture Style file to the camera,
refer to the EOS Utility Instruction Manual.
143
White balance (WB) is for making the white areas look white. Normally,
the Auto [Q] (Ambience priority) or [Qw] (White priority) setting will
obtain the correct white balance. If natural-looking colors cannot be
obtained with Auto, you can select the white balance to match the light
source or set it manually by shooting a white object.
In Basic Zone modes, [Q] (Ambience priority) is set automatically. (In
the <P> mode, [Qw] (White priority) is set.)
1Select [White balance].
Under the [z3] tab, select [White
balance], then press <0>.
X[White balance] will appear.
2Select a white balance setting.
Select the desired setting, then press
<0>.
The “Approx. ****K” (K: Kelvin)
displayed for the white balance
settings <W>, <E>, <R>, <Y>
or <U> is the respective color
temperature to be set.
To the human eye, a white object looks white regardless of the type of
lighting. With a digital camera, the white for color correction basis is
decided depending on the color temperature of the illumination, and
then the color is adjusted with software to make the white areas look
white. With this function, you can take the pictures with natural color
tones.
B: Matching the Light SourceN
White Balance
B: Matching the Light SourceN
144
With [Q] (Ambience priority), you can increase the intensity of the
image’s warm color cast when shooting a tungsten-light scene. If you
select [Qw] (White priority), you can reduce the intensity of the
image’s warm color cast.
If you want to match the Auto white balance of previous EOS DIGITAL
camera models, select [Q] (Ambience priority).
1Select [White balance].
Under the [z3] tab, select [White
balance], then press <0>.
X[White balance] will appear.
2Select [Q].
With [Q] selected, press the
<B> button.
3Select the desired item.
Select [Auto: Ambience priority] or
[Auto: White priority], then press
<0>.
Q: Auto: Ambience priority
Qw: Auto: White priority
Q Auto White Balance
Cautions for Setting [Qw] (White priority)
The warm color cast of subjects may fade.
When multiple light sources are included on the screen, the warm color
cast of the picture may not be reduced.
When using flash, the color tone will be the same as with [Q]
(Ambience priority).
145
B: Matching the Light SourceN
With custom white balance, you can set the white balance for the
specific light source of the shooting location. Make sure to perform this
procedure under the light source at the actual location of the shoot.
1Shoot a white object.
Look through the viewfinder and aim
the entire dotted line box (shown in
the illustration) over a plain, white
object.
Focus manually and shoot with the
standard exposure set for the white
object.
You can use any of the white balance
settings.
2Select [Custom White Balance].
Under the [z3] tab, select [Custom
White Balance], then press <0>.
XThe custom white balance selection
screen will appear.
3Import the white balance data.
Select the image captured in step 1,
then press <0>.
XOn the dialog screen that appears,
select [OK], and the data will be
imported.
When the menu reappears, press the
<M> button to exit the menu.
O Custom White Balance
B: Matching the Light SourceN
146
4Select [O (Custom)].
Under the [z3] tab, select [White
balance], then press <0>.
Select [O (Custom)], then press
<0>.
If the exposure obtained in step 1 differs greatly from the standard
exposure, a correct white balance may not be obtained.
In step 3, the following images cannot be selected: Images captured with
the Picture Style set to [Monochrome] (p.136), images shot with a
Creative filter, images processed with a Creative filter after shooting,
cropped images, and images shot with another camera.
147
You can correct the white balance that is set. This adjustment will have
the same effect as using a commercially-available color temperature
conversion filter or color compensating filter. Each color can be
corrected to one of nine levels.
This function is for advanced users, particularly for those users who
understand the use of color temperature conversion and color
compensating filters and their effects.
1Select [WB Shift/Bkt.].
Under the [z3] tab, select [WB
Shift/Bkt.], then press <0>.
XThe WB correction/WB bracketing
screen will appear.
2Set the white balance correction.
Press the <W> <X> or <Y> <Z>
keys to move the “ ” mark to the
appropriate position.
B is for blue, A for amber, M for
magenta, and G for green. The
image’s color balance will be adjusted
toward the color in the direction of the
move.
On the right of the screen, “Shift”
indicates the direction and correction
amount, respectively.
Pressing the <L> button will cancel
all the [WB Shift/Bkt.] settings.
Press <0> to exit the setting and
return to the menu.
u
Adjusting the Color Tone for the Light Source
N
White Balance Correction
Sample setting: A2, G1
You can set the camera to display <i> in the viewfinder and on the LCD
monitor for when white balance correction is set (p.369).
One level of the blue/amber correction is equivalent to approx. 5 mireds
of a color temperature conversion filter. (Mired: Unit of measure for color
temperature used to indicate values such as the density of a color
temperature conversion filter.)
u Adjusting the Color Tone for the Light SourceN
148
With just one shot, three images with different color tones can be
recorded simultaneously. Based on the color temperature of the current
white balance setting, the image will be bracketed with a blue/amber
bias and magenta/green bias. This function is called white balance
bracketing (WB Bkt.). White balance bracketing is possible up to ±3
levels in single-level increments.
Set the white balance bracketing amount.
In step 2 for “White Balance
Correction”, when you turn the <6>
dial, the “ ” mark on the screen will
change to “ ” (3 points).
Turning the dial clockwise sets the B/
A bracketing, and turning it
counterclockwise sets the M/G
bracketing.
XOn the right, “Bracket” indicates the
bracketing direction and correction
amount.
Pressing the <L> button will cancel
all the [WB Shift/Bkt.] settings.
Press <0> to exit the setting and
return to the menu.
Bracketing Sequence
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, and 3. Green (G) bias.
White Balance Auto Bracketing
B/A bias ±3 levels
During white balance bracketing, the maximum burst will be lower and
the number of possible shots will also decrease to approx. one-third the
normal number.
Since three images are recorded for one shot, it takes longer to record
the image to the card.
You can also set white balance correction and AEB together with white
balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
During Live View shooting, the white balance icon will blink.
“Bkt.” stands for bracketing.
149
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. This function is called Auto
Lighting Optimizer. The default setting is [Standard]. With JPEG
images, the correction is applied when the image is captured.
In Basic Zone modes, [Standard] is set automatically.
1Select [Auto Lighting Optimizer].
Under the [z3] tab, select [Auto
Lighting Optimizer], then press
<0>.
2Select the setting.
Select the desired setting, then press
<0>.
3Take the picture.
The image will be recorded with the
brightness and contrast corrected as
necessary.
3
Auto Correction of Brightness and Contrast
N
Under [54: Custom Functions (C.Fn)], if [4: Highlight tone priority] is
set to [1:Enable], [Auto Lighting Optimizer] will be set automatically to
[Disable].
If a setting other than [Disable] is set and you use exposure
compensation or flash exposure compensation to darken the exposure,
the image may still come out bright. If you want a darker exposure, set
this function to [Disable].
Depending on the shooting conditions, noise may increase.
In step 2, if you press the <B> button and remove the checkmark [X] for
[Disable during man expo] setting, the Auto Lighting Optimizer can also be
set in the <a> mode.
150
This function reduces the noise generated in the image. Although noise
reduction is applied at all ISO speeds, it is particularly effective at high
ISO speeds. When shooting at low ISO speeds, the noise in the darker
parts of the image (shadow areas) can further be reduced. Change the
setting to match the noise level.
1Select [High ISO speed NR].
Under the [z4] tab, select [High ISO
speed NR], then press <0>.
2Set the level.
Select the desired noise reduction
level, then press <0>.
[M: Multi Shot Noise Reduction]
Applies the noise reduction with higher image quality than [High].
For a single photo, four shots are taken continuously and aligned
and merged automatically into a single JPEG image.
If the image-recording quality is set to 1 or 1+73, you cannot
set [Multi Shot Noise Reduction].
3Take the picture.
The image will be recorded with noise
reduction applied.
3 Setting Noise ReductionN
High ISO Speed Noise Reduction
You can set the camera to display <i> in the viewfinder for when Multi Shot
Noise Reduction is set (p.369).
151
3 Setting Noise ReductionN
Noise reduction is possible with images exposed for 1 sec. or longer.
1Select [Long exp. noise
reduction].
Under the [z4] tab, select [Long
exp. noise reduction], then press
<0>.
Long Exposure Noise Reduction
When [Multi Shot Noise Reduction] is Set
If there is significant misalignment in the image due to camera shake, the
noise reduction effect may become smaller.
If you are handholding the camera, keep it steady to prevent camera
shake. Using a tripod is recommended.
If you shoot a moving subject, the moving subject may leave
afterimages.
The image alignment may not function properly with repetitive patterns
(lattice, stripes, etc.) or flat, single-tone images.
If the subject’s brightness changes as the four consecutive shots are
taken, irregular exposure in the image may result.
After shooting, it may take some time to record an image to the card after
performing noise reduction and merging the images. During the image
processing, “buSY” will be displayed in the viewfinder, and you cannot
take another picture until the processing is complete.
You cannot use AEB and white balance bracketing.
If [z4: Long exp. noise reduction], AEB, or white balance bracketing
is set, [Multi Shot Noise Reduction] cannot be set.
The [Distortion] setting will be set automatically to [Disable].
Flash photography is not possible. However, the AF-assist beam will be
emitted according to the setting of [5: AF-assist beam firing] under
[54: Custom Functions(C.Fn)].
You cannot set [Multi Shot Noise Reduction] for bulb exposures.
If you turn off the power, change the shooting mode to a Basic Zone
mode, shoot a bulb exposure, or shoot a movie, the setting will
automatically be changed to [Standard].
[z4: Dust Delete Data] cannot be set.
3 Setting Noise ReductionN
152
2Set the desired setting.
Select the desired setting, then press
<0>.
[Auto]
For exposures of 1 sec. or longer, noise reduction is performed
automatically if noise typical of long exposures is detected. This
[Auto] setting is effective enough in most cases.
[Enable]
Noise reduction is performed for all exposures of 1 sec. or longer.
The [Enable] setting may reduce noise that cannot be detected with
the [Auto] setting.
3Take the picture.
The image will be recorded with noise
reduction applied.
With [
Auto
] or [
Enable
] set, the noise reduction process after the picture
is taken may take the same amount of time as that for the exposure. You
cannot take another picture until the noise reduction process is complete.
Images taken at ISO 1600 or higher may look grainier with the [Enable]
setting than with the [Disable] or [Auto] setting.
With [Auto] or [Enable] set, if a long exposure is used with the Live View
image displayed, “BUSY” will be displayed during the noise reduction
process. The Live View display will not appear until the noise reduction is
complete. (You cannot take another picture.)
153
Peripheral light fall-off is a phenomenon that makes the image corners
look darker due to the optical characteristics of the lens. Color fringing
along subject outlines is called chromatic aberration. Image distortion
due to optical characteristics of the lens is called distortion. And
decreased image sharpness due to the aperture is called diffraction
phenomenon. These lens aberrations can be corrected.
By default, [Peripheral illum corr], [Chromatic aberr corr], and
[Diffraction correction] are set to [Enable], and [Distortion
correction] is set to [Disable].
If the lens correction data is registered (saved) in the camera,
peripheral illumination correction, chromatic aberration correction, and
diffraction correction will be applied even in Basic Zone modes.
If the setting screen displays [Correction data not available] or the
[F] icon, it means that the correction data for the respective lens is not
registered in the camera. See “Lens Correction Data” on page 157.
1Select [Lens aberration
correction].
Under the [z2] tab, select [Lens
aberration correction], then press
<0>.
2Select [Peripheral illum corr].
3
Correction of Lens Aberrations due to
Optical Characteristics
N
Peripheral Illumination Correction
3 Correction of Lens Aberrations due to Optical CharacteristicsN
154
3Select [Enable].
Check that [Correction data
available] is displayed for the
attached lens.
Select [Enable], then press <0>.
4Take the picture.
The image will be recorded with the
peripheral illumination corrected.
Depending on shooting conditions, noise may appear on the image
periphery.
The higher the ISO speed, the lower the correction amount will be.
If you use the magnified view during Live View shooting, the peripheral
illumination correction will not be reflected in the image displayed on the
screen.
The correction amount applied will be slightly lower than the maximum
correction amount that can be applied with Digital Photo Professional (EOS
software, p.444).
155
3 Correction of Lens Aberrations due to Optical CharacteristicsN
1Select [Chromatic aberr corr].
2Select [Enable].
Check that [Correction data
available] is displayed for the
attached lens.
Select [Enable], then press <0>.
3Take the picture.
The image will be recorded with the
chromatic aberration corrected.
1Select [Distortion correction].
2Select [Enable].
Check that [Correction data
available] is displayed for the
attached lens.
Select [Enable], then press <0>.
3Take the picture.
The image will be recorded with the
distortion corrected.
Chromatic Aberration Correction
Distortion Correction
3 Correction of Lens Aberrations due to Optical CharacteristicsN
156
1Select [Diffraction correction].
2Select [Enable].
Select [Enable], then press <0>.
3Take the picture.
The image will be recorded with the
diffraction corrected.
Diffraction Correction
Since distortion correction is applied, the camera records an image
range narrower than the one seen through the viewfinder. (The image
periphery is slightly trimmed and the resolution looks slightly lowered.)
Distortion correction will be reflected in the captured image, but it cannot
be seen in the viewfinder during shooting.
Distortion correction cannot be set during movie shooting or when Multi
Shot Noise Reduction is set.
Using distortion correction during Live View shooting will slightly affect
the angle of view.
When you magnify the image during Live View shooting, distortion correction
is not applied to the image displayed. Therefore, magnifying the periphery of
the image may display parts of the image that will not be recorded.
Images with distortion correction applied will not have the Dust Delete
Data (p.304) appended. Also, the AF point(s) will not be displayed
(p.349) for image playback.
Depending on shooting conditions, noise may be intensified together
with the effects of correction.
The higher the ISO speed, the lower the correction amount will be.
Diffraction correction will not be applied to the Live View image.
For movie shooting, [Diffraction correction] will not appear. (Correction
is not possible.)
With “Diffraction correction”, degraded resolution due to the low-pass filter,
etc. is corrected in addition to diffraction. Therefore, correction is effective
even at an aperture close to the open aperture.
157
3 Correction of Lens Aberrations due to Optical CharacteristicsN
The lens correction data for lens aberration corrections is registered
(stored) in the camera. With [Enable] selected, the peripheral
illumination correction, chromatic aberration correction, distortion
correction, and diffraction correction will be applied automatically.
With EOS Utility (EOS software, p.444), you can check which lenses
have their correction data registered in the camera. You can also
register the correction data for unregistered lenses. For details, refer to
the EOS Utility Instruction Manual.
For lenses incorporating the correction data, it is not necessary to
register the correction data to the camera.
Lens Correction Data
3 Correction of Lens Aberrations due to Optical CharacteristicsN
158
General Cautions for Lens Aberration Correction
Peripheral illumination correction, chromatic aberration correction,
distortion correction, and diffraction correction cannot be applied to
JPEG images already taken.
When using a non-Canon lens, setting the corrections to [Disable] is
recommended even if [Correction data available] is displayed.
The correction amount will be less (except for diffraction correction) if the
lens used does not have distance information.
General Notes for Lens Aberration Correction
The effect of the lens aberration correction varies depending on the lens
used and shooting conditions. Also, the effect may be difficult to discern
depending on the lens used, shooting conditions, etc.
If the effect of the correction is not visible, magnify the image after
shooting and check it again.
Corrections can be applied even when an extender or life-size converter
is attached.
If the correction data for the attached lens is not registered to the
camera, the result will be the same as when the correction is set to
[Disable] (except for diffraction correction).
In Basic Zone modes, peripheral illumination correction, chromatic
aberration correction, and diffraction correction will be applied
automatically. Distortion correction will be applied automatically only in
the <q> mode.
159
The range of reproducible colors is called “color space”. With this
camera, you can set the color space for captured images to sRGB or
Adobe RGB. For normal shooting, sRGB is recommended.
In Basic Zone modes, [sRGB] is set automatically.
1Select [Color space].
Under the [z3] tab, select [Color
space], then press <0>.
2Set the desired color space.
Select [sRGB] or [Adobe RGB], then
press <0>.
This color space is mainly used for commercial printing and other
industrial uses. This setting is not recommended if you are not familiar
with image processing, Adobe RGB, and Design rule for Camera File
System 2.0 (Exif 2.21 or higher). The image will look very subdued in an
sRGB computer environment and with printers not compliant to Design
rule for Camera File System 2.0 (Exif 2.21 or higher). Post-processing
of the image with computer software will therefore be required.
3
Setting the Color Reproduction Range
N
Adobe RGB
If the still photo is shot in the Adobe RGB color space, the first character
in the file name will be an underscore “_”.
The ICC profile is not appended. For explanations about the ICC profile,
refer to the Digital Photo Professional Instruction Manual.
160
161
5
Advanced Operations
for Photographic Effects
In Creative Zone modes, you
can change various settings of
the camera as you desire to
obtain a wide variety of
shooting results, by selecting
the shutter speed and/or
aperture, adjusting the
exposure as you prefer, etc.
The O icon at the upper right of the page title indicates that
the function is available only in Creative Zone modes.
After you press the shutter button halfway and let it go, the
exposure settings will remain displayed in the viewfinder for
approx. 4 sec. (0) by the metering timer function.
For the functions settable in each shooting mode, see page
396.
The pointer icon <z> displayed
together with the shutter speed or
aperture setting indicates that you can turn the <6> dial to
adjust the respective setting.
z Main Dial Pointer
C
r
e
a
t
i
v
e
Z
o
n
e
162
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
*<d> stands for Program.
* AE stands for Auto Exposure.
1Set the Mode Dial to <d>.
2Focus on the subject.
Look through the viewfinder and aim
the AF point over the subject. Then
press the shutter button halfway.
XWhen focus is achieved, the dot
inside the AF point achieving focus
lights up briefly in red, and the focus
indicator <o> on the viewfinder’s
bottom right will light up (in One-Shot
AF mode).
XThe shutter speed and aperture will
be set automatically and displayed in
the viewfinder.
3Check the display.
The standard exposure will be
obtained as long as the shutter speed
and aperture displays do not blink.
4Take the picture.
Compose the shot and press the
shutter button completely.
d: Program AE
If a description of the shooting mode appears in step 1, press <0> to hide
it (p.55).
163
d: Program AE
Change the ISO speed. Use the built-in flash.
To match the subject and ambient lighting level, you can change the
ISO speed (p.132) or use the built-in flash (p.182). In the <d>
mode, the built-in flash will not fire automatically. Therefore, press
the <D> (flash) button to raise the built-in flash when indoors or
shooting in low light.
Change the program using Program shift.
After pressing the shutter button halfway, turn the <6> dial to
change the shutter speed and aperture setting combination
(program). Program shift is canceled automatically after the picture
is taken. Program shift is not possible with flash.
Shooting Tips
If the “30"” shutter speed and the lowest f/number
blink, it indicates underexposure. Increase the ISO
speed or use flash.
If the “4000” shutter speed and the highest f/number
blink, it indicates overexposure. Decrease the ISO
speed.
Differences Between <d> and <A> (Scene Intelligent Auto)
In the <A> mode, many functions, such as the AF operation and metering
mode, are set automatically to prevent spoiled shots. The functions you can
set are limited. On the other hand, with <d> mode, only the shutter speed
and aperture are set automatically. You can freely set the AF operation,
metering mode, and other functions (p.390).
164
You can either freeze the action or create motion blur with the <s>
(Shutter-priority AE) mode on the Mode Dial.
*<s> stands for Time value.
1Set the Mode Dial to <s>.
2Set the desired shutter speed.
See “Shooting Tips” on the next page
for advice on setting the shutter
speed.
Turning the <6> dial clockwise sets
a faster shutter speed, and turning it
counterclockwise sets a slower one.
3Take the picture.
When you focus and press the
shutter button completely, the picture
will be taken at the set shutter speed.
s: Conveying the Subject’s Movement
Blurred motion
(Slow shutter speed: 1/30 sec.)
Frozen motion
(Fast shutter speed: 1/2000 sec.)
Shutter Speed Display
The LCD monitor displays the shutter speed as a fraction. However, the
viewfinder displays only the denominator. “0"5” indicates 0.5 sec. and “15"”
is 15 sec.
165
s: Conveying the Subject’s Movement
To freeze the motion of a fast-moving subject
Use a fast shutter speed such as 1/4000 sec. to 1/500 sec.
according to the speed of the moving subject.
To blur a running child or animal and convey an impression of
motion
Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow
the moving subject through the viewfinder and press the shutter
button to take the picture. If you use a telephoto lens, hold it steady
to prevent camera shake.
To blur a flowing river or fountain
Use a slow shutter speed of 1/30 sec. or slower. Use a tripod to
prevent hand-held camera shake.
Set the shutter speed so that the aperture display does not blink.
If you press the shutter button halfway and change
the shutter speed with the aperture displayed, the
aperture value will also change to maintain the
same exposure (amount of light reaching the image
sensor). In this operation, if the aperture value
exceeds the adjustable range, it will blink to indicate
that the standard exposure cannot be obtained.
If the exposure will be too dark, the maximum aperture (lowest
f/number) will blink. If this happens, turn the <6> dial
counterclockwise to set a slower shutter speed or increase the ISO
speed.
If the exposure will be too bright, the minimum aperture (highest
f/number) will blink. If this happens, turn the <6> dial clockwise to
set a faster shutter speed or decrease the ISO speed.
To obtain a correct flash exposure on the main subject, the flash
output will be set automatically (autoflash) to match the
automatically-set aperture. Note that the range of settable shutter
speed will be limited within 1/200 sec. to 30 sec.
Shooting Tips
D Using the Built-in Flash
166
To blur the background or to make everything near and far look sharp,
set the Mode Dial to <f> (Aperture-priority AE) to adjust the depth of
field (range of acceptable focus).
*<f> stands for Aperture value (the size of the lens diaphragm opening).
1Set the Mode Dial to <f>.
2Set the desired aperture.
The higher the f/number, the wider
the depth of field where sharper focus
is obtained in both the foreground
and background.
Turning the <6> dial clockwise sets
a higher f/number (smaller aperture
opening), and turning it
counterclockwise sets a lower
f/number (larger aperture opening).
3Take the picture.
When you focus and press the
shutter button completely, the picture
will be taken with the set aperture.
f: Changing the Depth of Field
Sharp foreground and background
(With a high aperture f/number: f/32)
Blurred background
(With a low aperture f/number: f/5.6)
Aperture Value Display
The higher the f/number, the smaller the aperture opening will be. The
f/number displayed will differ depending on the lens. If no lens is attached to
the camera, “00” will be displayed for the aperture.
167
f: Changing the Depth of Field
When using an aperture with a high f/number or shooting in low
light scenes, note that camera shake can occur.
A higher aperture f/number will make the shutter speed slower.
Under low light, the shutter speed can be as long as 30 sec. In such
cases, increase the ISO speed and hold the camera steady or use a
tripod.
The depth of field will vary depending not only on the aperture,
but also on the lens and on the subject distance.
Since wide-angle lenses have a wide depth of field (range of
acceptable focus in front of and behind the point of focus), you need
not set a high aperture f/number to obtain a sharp picture from the
foreground to the background. On the other hand, a telephoto lens
has a narrow depth of field.
And the closer the subject, the narrower the depth of field. A farther
subject will have a wider depth of field.
Set the aperture so that the shutter speed display does not
blink.
If you press the shutter button halfway and change
the aperture with the shutter speed displayed, the
shutter speed will also change to maintain the
same exposure (amount of light reaching the
image sensor). In this operation, if the shutter
speed exceeds the adjustable range, it will blink to
indicate that the standard exposure cannot be
obtained.
If the picture will be too dark, the “30"” (30 sec.) shutter speed
display will blink. If this happens, turn the <6> dial
counterclockwise to set a lower f/number or increase the ISO speed.
If the picture will be too bright, the “4000” (1/4000 sec.) shutter
speed display will blink. If this happens, turn the <6> dial
clockwise to set a higher f/number or decrease the ISO speed.
Shooting Tips
f: Changing the Depth of Field
168
To obtain a correct flash exposure, the flash output will be automatically
controlled (autoflash) to match the set aperture. The shutter speed will
be set automatically within the range of 1/200 sec. - 30 sec. to match
the brightness of the scene.
In low light, the main subject is exposed with the autoflash, and the
background is exposed with a slow shutter speed set automatically. The
picture comes out with the standard exposure for both the subject and
background with a touch of the atmosphere (automatic slow-speed
flash sync). If you are handholding the camera, keep it steady to
prevent camera shake. Using a tripod is recommended to prevent
camera shake.
To prevent a slow shutter speed, under [z2: Flash control], set
[Flash sync. speed in Av mode] to [1/200-1/60sec. auto] or [1/200
sec. (fixed)] (p.190).
The aperture opening (diaphragm) changes only at the moment when
the picture is taken. Otherwise, the aperture remains fully open.
Therefore, when you look at the scene through the viewfinder or on the
LCD monitor, the depth of field will look narrow.
Press the depth-of-field preview button
to stop down the lens to the current
aperture setting and check the depth of
field (range of acceptable focus).
D Using the Built-in Flash
Depth-of-Field PreviewN
While looking at the Live View image (p.196) and holding down the depth-of-
field preview button, you can see how the range of acceptable focus will
change as you adjust the aperture.
169
You can set both the shutter speed and aperture manually as desired.
While referring to the exposure level indicator in the viewfinder, you can
set the exposure as desired. This method is called manual exposure.
*<a> stands for Manual.
1Set the Mode Dial to <a>.
2Set the ISO speed (p.132).
3Set the shutter speed and
aperture.
To set the shutter speed, turn the
<6> dial.
To set the aperture, turn the <6>
dial while holding down the <g>
button.
4Focus on the subject.
Press the shutter button halfway.
XThe exposure setting will be
displayed in the viewfinder.
Check the exposure level mark <h>
to see how far the current exposure
level is from the standard exposure
level.
5Set the exposure and take the picture.
Check the exposure level indicator and set the desired shutter
speed and aperture.
If the exposure level exceeds ±2 stops from the standard
exposure, the end of the exposure level indicator will display <I>
or <J> in the viewfinder. (On the LCD monitor, if the exposure
level exceeds ±3 stops, <I> or <J> will be displayed.)
a: Manual Exposure
<6>
<g> + <6>
Exposure level mark
Standard exposure index
The set exposure setting will not be maintained for movie shooting.
a: Manual Exposure
170
If the ISO speed is set to [AUTO] for manual exposure shooting, you
can set exposure compensation (p.174) as follows:
[z2: Expo.comp./AEB]
[5:Expo comp (hold btn, turn S)] with [9: Assign SET button]
under [54: Custom Functions(C.Fn)] (p.371)
Quick Control (p.58)
To obtain a correct flash exposure on the main subject, the flash output
will be set automatically (autoflash) to match the manually-set aperture.
Note that the range of settable shutter speed will be limited within 1/200
sec. to 30 sec. or to bulb.
Exposure Compensation with ISO Auto
D Using the Built-in Flash
If ISO Auto is set, the ISO speed setting will change to obtain the
standard exposure with the set shutter speed and aperture. Therefore,
you may not obtain the desired exposure effect. In such a case, set the
exposure compensation.
If flash is used when ISO Auto is set, exposure compensation will not be
applied even if an exposure compensation amount is set.
Under [z3: Auto Lighting Optimizer], if the checkmark [X] for
[Disable during man expo] is removed, Auto Lighting Optimizer can be
set even in the <a> mode (p.149).
When ISO Auto is set, you can press the <A> button to lock the ISO
speed.
If you press the <A> button and recompose the shot, you can see the
exposure level difference on the exposure level indicator compared to
when the <A> button was pressed.
If exposure compensation (p.174) was applied in <d>, <s>, or <f>
mode, the exposure compensation amount already set will still be
maintained when the shooting mode is switched to <a> with ISO Auto
set.
171
a: Manual Exposure
A bulb exposure keeps the shutter open
for as long as you hold down the shutter
button. It can be used to shoot fireworks
and other subjects requiring long
exposures.
In step 3 on page 169, turn the <6>
dial to the left to set <BULB>. The
elapsed exposure time will be displayed
on the LCD monitor.
BULB: Long (Bulb) Exposures
Elapsed exposure time
Do not point the camera toward an intense light source, such as the sun
or an intense artificial light source. Doing so may damage the image
sensor or the camera’s internal components.
Since long bulb exposures produce more noise than usual, the image
may look slightly grainy.
If ISO Auto is set, the ISO speed will be ISO 400.
When shooting bulb exposures, if you use both the self-timer and mirror
lockup, keep pressing the shutter button completely (for self-timer delay
time + bulb exposure time). If you let go of the shutter button during the
self-timer countdown, there will be a shutter-release sound, but no
picture will be taken.
You can reduce the noise due to long exposures by setting [z4: Long
exp. noise reduction] to [Auto] or [Enable] (p.151).
For bulb exposures, using a tripod and a remote switch (sold separately,
p.385) is recommended.
You can also use Wireless Remote Control BR-E1 (sold separately,
p.382) for bulb exposures. When you press the BR-E1’s release button
(transmit button), the bulb exposure will start immediately or 2 sec. later.
Press the button again to stop the bulb exposure.
You can turn off the elapsed exposure time display by pressing the
<U> button.
172
Four methods (metering modes) to measure the subject’s brightness are
provided. Normally, evaluative metering is recommended. In Basic Zone
modes, evaluative metering is set automatically. (In the <
8:
x
> and
<
v:
X
> modes, center-weighted average metering is set.)
1Select [Metering mode].
Under the [z3] tab, select [Metering
mode], then press <0>.
2Set the metering mode.
Select the desired metering mode,
then press <0>.
q Evaluative metering
General-purpose metering mode suited even
for backlit subjects. The camera adjusts the
exposure automatically to suit the scene.
w Partial metering
Effective where there are much brighter lights
around the subject due to backlight, etc. The
gray area in the left figure is approximately
where the brightness is metered to obtain the
standard exposure.
r Spot metering
Effective when metering a specific part of the
subject or scene. The gray area in the left figure
is approximately where the brightness is
metered to obtain the standard exposure. This
metering mode is for advanced users.
q Changing the Metering ModeN
173
q Changing the Metering ModeN
e Center-weighted average metering
The metering is averaged for the entire scene
with the screen center weighted more heavily.
This metering mode is for advanced experts.
With q (Evaluative metering), the exposure setting will be locked when you
press the shutter button halfway and focus is achieved. In the w (Partial
metering), r (Spot metering), and e (Center-weighted average metering)
modes, the exposure is set at the moment the picture is taken. (Pressing the
shutter button halfway does not lock the exposure.)
174
Set exposure compensation if the results of shooting without using the
flash are not as bright as expected. This feature can be used in Creative
Zone modes (except <a>). You can set the exposure compensation up
to ±5 stops* in 1/3-stop increments.
If the <a> mode and ISO Auto are both set, see page 170 to set the
exposure compensation.
* In Live View shooting/movie shooting, or when [s: Shooting screen] is set to
[Guided], exposure compensation can be set up to ±3 stops.
1Check the exposure level
indicator.
Press the shutter button halfway
(0) and check the exposure level
indicator in the viewfinder or on the
LCD monitor.
2Set the compensation amount.
If the exposure is too dark, turn the
<6> dial clockwise while holding
down the <g> button (for
increased exposure).
If the exposure is too bright, turn the
<6> dial counterclockwise while
holding down the <g> button (for
decreased exposure).
3Take the picture.
To cancel the exposure
compensation, set the compensation
amount back to <E>.
Setting the Desired Exposure Compensation
N
Increased exposure
for a brighter image
Decreased exposure
for a darker image
175
Setting the Desired Exposure CompensationN
If [z3: Auto Lighting Optimizer] (p.149) is set to any setting other than
[Disable], the image may still look bright even if a decreased exposure
compensation for a darker image is set.
The set exposure compensation level will not be applied to movie
shooting.
When you set the power switch to <2>, the exposure compensation
setting will be canceled.
The exposure compensation amount displayed in the viewfinder goes up
to only ±2 stops. If the exposure compensation amount exceeds ±2
stops, the end of the exposure level indicator will display <I> or <J>.
If you want to set exposure compensation exceeding ±2 stops, setting it
with [z2: Expo.comp./AEB] (p.176) is recommended.
176
This feature takes exposure compensation a step further by varying the
exposure automatically in the range of ±2 stops in 1/3-stop increments
with three shots as shown below. You can then choose the best exposure.
This is called AEB (Auto Exposure Bracketing).
1Select [Expo.comp./AEB].
Under the [
z2
] tab, select
[
Expo.comp./AEB
], then press
<
0
>.
2Set the AEB range.
Turn the <6> dial to set the AEB
range.
Press the <Y> <Z> keys to set the
exposure compensation amount. If
AEB is combined with exposure
compensation, AEB will be applied
centering on level of exposure
compensation.
Press <0> to set it.
When you press the shutter button
halfway, the AEB range will be
displayed in the viewfinder.
3Take the picture.
Focus and press the shutter button
completely, and the shots will be
taken in the sequence of standard
exposure, decreased exposure, and
increased exposure.
3 Auto Exposure BracketingN
Standard exposure Darker exposure
(Decreased exposure)
Brighter exposure
(Increased exposure)
AEB range
177
3 Auto Exposure BracketingN
Follow steps 1 and 2 to turn off the AEB range display (set to 0).
The AEB setting will also be canceled automatically if the power
switch is set to <2>, flash recharging is complete, etc.
Using AEB with continuous shooting
If you set the drive mode to <i> or <M> (p.123) and press the
shutter button completely, the three bracketed shots will be taken
consecutively in the sequence of standard exposure, decreased
exposure, and increased exposure, and then the camera will
automatically stop shooting.
Using AEB with single shooting (u/B)
Press the shutter button three times to take the three bracketed
shots. The shots will be taken in the sequence of standard exposure,
decreased exposure, and increased exposure.
Using AEB with the self-timer or a remote controller (sold
separately)
With the self-timer (<m> <l>), Wireless Remote Control BR-E1
<Q> or Remote Switch RS-60E3, you can take three consecutive
shots after a 10-sec. or 2-sec. delay. With <q> (p.125) set, the
number of consecutive shots will be three times the number set.
Canceling AEB
Shooting Tips
During AEB, <A> and AEB range in the viewfinder will blink.
AEB cannot be used with flash, when [Multi Shot Noise Reduction] is
set, for shooting with a Creative filter, or with bulb exposures.
If [z3: Auto Lighting Optimizer] (p.149) is set to any setting other than
[Disable], the effect of AEB may be reduced.
178
You can lock the exposure when you want to set the focus and
exposure separately or when you are to take multiple shots at the same
exposure setting. Press the <A> button to lock the exposure, then
recompose and take the picture. This is called AE lock. It is effective for
shooting backlit subjects, etc.
1Focus on the subject.
Press the shutter button halfway.
XThe exposure setting will be
displayed.
2Press the <A> button (0).
XThe <A> icon lights up in the
viewfinder to indicate that the
exposure setting is locked (AE lock).
Each time you press the <A> button,
the current exposure setting is
locked.
3Recompose and take the picture.
When you are to take more pictures
while maintaining the AE lock, keep
holding down the <A> button and
press the shutter button to take
another picture.
* When the lens’s focus mode switch is set to <MF>, AE lock is implemented with
the exposure weighting centered on the center AF point.
A Locking the ExposureN
AE Lock Effects
Metering
Mode
(p.172)
AF Point Selection Method (p.119)
Automatic Selection Manual Selection
q*AE lock is applied at the AF
point that achieved focus.
AE lock is applied at the
selected AF point.
wre AE lock is applied at the center AF point.
AE lock is not possible with bulb exposures.
179
You can use the mirror lockup function to prevent the disturbing
mechanical vibrations (mirror shock) when shooting with super
telephoto lenses or shooting close-ups (macro photography).
Mirror lockup is enabled by setting [6: Mirror lockup] to [1:Enable]
in [54: Custom Functions (C.Fn)] (p.369).
1 Focus on the subject, then press the shutter button
completely.
XThe mirror will swing up.
2 Press the shutter button completely again.
XThe picture is taken and the mirror goes back down.
After taking the picture, set [6: Mirror lockup] to [0:Disable].
Using the self-timer <m>, <l> with mirror lockup
When you press the shutter button completely, the mirror locks up.
The picture will be then taken 10 sec. or 2 sec. later.
Remote control shooting
Since you do not touch the camera when the picture is taken, remote
control shooting together with mirror lockup can further reduce the
camera vibration blur (p.382).
With Wireless Remote Control BR-E1 (sold separately) set to the 2-
sec. delay, press the release button to lock up the mirror, and the
picture will be taken 2 sec. after the mirror lockup.
With Remote Switch RS-60E3 (sold separately), press the release
button completely to lock up the mirror, and press it completely again
to take the picture.
Mirror Lockup to Reduce Camera Vibration Blur
N
Shooting Tips
Mirror Lockup to Reduce Camera Vibration BlurN
180
Do not point the camera toward an intense light source, such as the sun
or an intense artificial light source. Doing so may damage the image
sensor or the camera’s internal components.
In very bright light, such as at the beach or a ski slope on a sunny day,
take the picture promptly after mirror lockup is stabilized.
When shooting with mirror lockup, if you use both the self-timer and bulb
exposures, keep pressing the shutter button completely (for self-timer
delay time + bulb exposure time). If you let go of the shutter button
during the self-timer countdown, there will be a shutter-release sound,
but no picture will be taken.
During mirror lockup, shooting function settings, menu operations, etc.
are disabled.
When you use flash, the red-eye reduction lamp will not light up (p.183).
Even if you set the drive mode to <i>, <M>, or <q>, the camera
will still shoot in single shooting mode.
When [z4: High ISO speed NR] is set to [Multi Shot Noise
Reduction], four consecutive shots will be taken for a single picture
regardless of the [6: Mirror lockup] setting.
If approx. 30 sec. elapse after the mirror has locked up, it will go back
down automatically. Pressing the shutter button completely locks up the
mirror again.
When shooting with mirror lockup, using a tripod and Wireless Remote
Control BR-E1 (sold separately, p.382) or Remote Switch RS-60E3 (sold
separately, p.385) is recommended.
181
6
Flash Photography
This chapter describes how to shoot with built-in flash
and external Speedlites (EX-series, sold separately),
and how to set flash settings on the camera’s menu
screen.
AEB cannot be used in flash photography.
182
In indoor, low light, or backlit conditions in daylight, just raise the built-in
flash and press the shutter button to easily take beautiful pictures. In the
<d> mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set
automatically to prevent camera shake.
1Press the <D> button.
In Creative Zone modes, you can
press the <D> button anytime to take
flash pictures.
While the flash is recharging,
“DbuSY” is displayed in the
viewfinder, and [BUSYD] is displayed
on the LCD monitor.
2Press the shutter button halfway.
In the bottom left of the viewfinder,
check that the <D> icon is displayed.
3Take the picture.
When focus is achieved and you
press the shutter button completely,
the flash will fire at all times.
Effective Range of Built-in Flash (Approx. in meters / feet)
* When a high ISO speed is set and focusing distance is long, appropriate
exposure may not be obtained depending on the subject conditions, etc.
D Using the Built-in Flash
ISO Speed
(p.132)
EF-S18-55mm f/4-5.6 IS STM
Wide Angle Telephoto
f/4 f/5.6
ISO 100 1 - 2.5 / 3.3 - 8.2 1 - 1.8 / 3.3 - 5.9
ISO 400 1 - 4.9 / 3.3 - 16.1 1 - 3.5 / 3.3 - 11.5
ISO 1600 1.2 - 9.8 / 3.9 - 32.2 1 - 7.0 / 3.3 - 23.0
ISO 6400 2.5 - 19.6 / 8.2 - 64.3 1.8 - 14.0 / 5.9 - 45.9
183
D Using the Built-in Flash
In bright light, decrease the ISO speed.
If the exposure setting in the viewfinder blinks, decrease the ISO
speed.
Detach the lens hood. Do not get too close to the subject.
If the lens has a hood attached or you are too close to the subject,
the bottom of the picture may look dark due to the obstructed flash
light. For important shots, play back the image and check to make
sure the picture does not look unnaturally dark at the bottom part.
Using the red-eye reduction lamp before taking a flash picture can
reduce red eye.
Under the [z2] tab (the [z1] tab in
Basic Zone modes), select [Red-eye
reduc.], then press <0>.
Select [Enable], then press <0>.
For flash photography, when you
press the shutter button halfway, the
red-eye reduction lamp will light up.
Then when you press the shutter
button completely, the picture will be
taken.
Shooting Tips
3 Red-eye Reduction
The red-eye reduction feature is more effective when the subject looks at
the red-eye reduction lamp, when the room is well lit, or when you are
close to the subject.
When you press the shutter button halfway, the
scale display on the bottom of the viewfinder will
gradually shrink toward the center to turn off. For
best results, take the picture after this scale display disappears.
The effectiveness of red-eye reduction varies depending on the
individual subject.
D Using the Built-in Flash
184
Set the flash exposure compensation if the brightness of the subject
does not come out as desired (so you want to adjust the flash output) in
flash photography. You can set the flash exposure compensation up to
±2 stops in 1/3-stop increments.
1Select [Flash control].
Under the [z2] tab, select [Flash
control], then press <0>.
2Select [Built-in flash settings].
3Select [2exp. comp.].
4Set the compensation amount.
If the exposure is too dark, press the
<Z> key (for increased exposure).
If the exposure is too bright, press the
<Y> key (for decreased exposure).
XWhen you press the shutter button halfway, the <y> icon will
appear in the viewfinder.
After taking the picture, cancel the flash exposure
compensation by setting it back to 0.
3 Flash Exposure CompensationN
185
D Using the Built-in Flash
If the subject is at the edge of the screen, and you use flash, the subject
may turn out to be too bright or dark depending on the background, etc.
Use FE lock in such a case. After setting the flash output for the
appropriate subject brightness, you can recompose (put the subject
toward the side) and shoot. This feature can also be used with a Canon
EX-series Speedlite.
* FE stands for Flash Exposure.
1Press the <D> button.
XThe built-in flash will be raised.
Press the shutter button halfway and
look in the viewfinder to check that
the <D> icon is lit.
2Focus on the subject.
A Locking the Flash Exposure (FE lock)N
If [z3: Auto Lighting Optimizer] (p.149) is set to any setting other than
[Disable], the image may still look bright even if a decreased flash
exposure compensation is set.
If flash exposure compensation is set with an external Speedlite (sold
separately, p.187), you cannot set the flash exposure compensation with
the camera (Quick Control or External flash function settings). If it is set
with both the camera and external Speedlite, the Speedlite’s setting
overrides the camera’s.
The compensation amount will be retained even after you set the power
switch to <2>.
D Using the Built-in Flash
186
3Press the <A> button (8).
Aim the viewfinder center over the
subject where you want to lock the
flash exposure, then press the <A>
button.
XThe flash will fire a preflash and the
required flash output is calculated
and retained in memory.
XIn the viewfinder, “FEL” is displayed
for a moment and <d> will light up.
Each time you press the <A> button,
a preflash is fired and the required
flash output is calculated and retained
in memory.
4Take the picture.
Compose the shot and press the
shutter button completely.
XThe flash is fired, and the picture is
taken.
If the subject is too far away and the captured image comes out dark, the
<D> icon will blink. Move closer to the subject and repeat steps 2 to 4.
FE lock is not possible during Live View shooting.
187
Using an EX-series Speedlite (sold separately) makes flash
photography easy.
For operation procedures, refer to the EX-series Speedlite’s
Instruction Manual. This camera is a Type-A camera that can use all
the features of EX-series Speedlites.
To set the flash functions and flash Custom Functions on the camera’s
menu screen, see pages 189-194.
D Using an External Speedlite
EOS-dedicated, EX-series Speedlites
Shoe-mount Speedlites Macro Lites
With an EX-series Speedlite not compatible with the flash function
settings (p.189), only [Flash exp. comp] and [E-TTL II meter.] can be
set for [External flash func. setting]. ([Shutter sync.] can also be set
with certain EX-series Speedlites.)
If flash exposure compensation is set with the external Speedlite, the
flash exposure compensation icon displayed on the camera’s LCD
monitor will change from y to 0 (when [s: Shooting screen] is set
to [Standard]).
D Using an External Speedlite
188
With an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL
autoflash mode, the flash is fired at full output at all times.
Set the camera’s shooting mode to <a> (manual exposure) or
<f> (aperture-priority AE) and adjust the aperture setting before
shooting.
When using a Speedlite that has manual flash mode, shoot in the
manual flash mode.
Sync Speed
The camera can synchronize with compact, non-Canon flash units at
1/200 sec. or slower shutter speeds. Use a sync speed slower than
1/200 sec.
Be sure to test the flash unit beforehand to make sure it synchronizes
properly with the camera.
Cautions for Live View Shooting
A non-Canon flash will not fire during Live View shooting.
Canon Speedlites Other Than the EX-series
Using Non-Canon Flash Units
If the camera is used with a flash unit or flash accessory dedicated to
another camera brand, the camera not only may not operate properly,
but malfunction may result.
Do not attach a high-voltage flash unit to the camera’s hot shoe. It may
not be fired.
189
With the built-in flash or an EX-series, external Speedlite compatible
with the flash function settings, you can use the camera’s menu screen
to set flash functions and the external Speedlite’s Custom Functions.
If you use an external Speedlite, attach the Speedlite to the camera
and turn on the Speedlite before setting the flash functions. For
details on the external Speedlite’s flash functions, refer to the
Speedlite’s instruction manual.
1Select [Flash control].
Under the [z2] tab, select [Flash
control], then press <0>.
XThe Flash control screen will appear.
2Select the desired item.
Select the menu option to be set, then
press <0>.
To enable flash photography, set
[Enable]. To enable only the AF-assist
beam to be emitted, set [Disable].
For normal flash exposures, set it to
[Evaluative]. If [Average] is set, the
flash exposure will be averaged for the
entire metered scene. Depending on the
scene, flash exposure compensation
may be necessary. This setting is for
advanced users.
3 Setting the Flash FunctionN
Flash Firing
E-TTL II Flash Metering
Even if [Flash firing] is set to [Disable], if focus is difficult to achieve in low
light, the flash may still fire a series of flashes (AF-assist beam, p.117).
3 Setting the Flash FunctionN
190
You can set the flash-sync speed for
flash photography in the aperture-priority
AE <f> mode.
4: Auto
The flash sync speed is set automatically within a range of 1/200
sec. to 30 sec. to suit the scene’s brightness. High-speed sync is
also possible. (The shutter speed is set automatically within a range
of 1/4000 to 30 sec.)
6: 1/200-1/60 sec. auto
Prevents a slow shutter speed from being set in low-light conditions.
It is effective for preventing subject blur and camera shake.
However, while the subject will be properly exposed with the flash,
the background may come out dark.
7: 1/200 sec. (fixed)
The flash sync speed is fixed at 1/200 sec. This more effectively
prevents subject blur and camera shake than with [1/200-1/60sec.
auto]. However, in low light, the subject’s background will come out
darker than with [1/200-1/60sec. auto].
Flash Sync. Speed in Av Mode
If [1/200-1/60sec. auto] or [1/200 sec. (fixed)] is set, high-speed sync is not
possible in the <f> mode with the external Speedlite.
191
3 Setting the Flash FunctionN
When you use the built-in flash or an
external, EX-series Speedlite compatible
with the flash function settings, you can
press the <D> button to directly display
the [Built-in flash settings] or [External
flash func. setting] screen without first
displaying the menu screen.
With built-in flash
Press the <D> button twice.
Press the button to raise the built-in
flash.
Press the button again to display the
[Built-in flash settings] screen.
If [Flash firing] is set to [Disable], the
[z2: Flash control] screen will
appear (p.189).
With external Speedlite
Press the <D> button.
With the external Speedlite turned on,
press the <D> button to display the
[External flash func. setting]
screen.
Displaying the Flash Function Setting Screen Directly
When you press the <D> button to display the flash function setting screen,
you cannot set [Flash firing], [E-TTL II meter.], [Flash sync. speed in Av
mode], or [External flash C.Fn setting]. Set these functions with [z2:
Flash control] instead.
3 Setting the Flash FunctionN
192
You can set the functions in the table below. The functions displayed under
[
External flash func. setting
] vary depending on the Speedlite model.
Select [Built-in flash settings] or
[External flash func. setting].
XThe flash function setting screen will
be displayed. With [Built-in flash
settings], only the highlighted
functions can be selected and set.
Main Functions for [Built-in flash settings] and [External flash
func. settings]
*For [Flash exposure bracketing] and [Flash zoom], refer to the instruction
manual of a Speedlite compatible with the functions.
[Built-in flash settings] and [External flash func. setting]
Function [Built-in flash settings][External flash func.
setting]Page
Normal Firing
Flash mode k193
Shutter
synchronization kk193
Flash exposure
bracketing* k
Flash exposure
compensation k k 184
Flash ratio control k
Master flash firing k
Flash zoom* k
[Built-in flash settings][External flash func. setting]
Flash mode
Flash zoom
(Flash coverage)
Flash exposure
compensation
Shutter
synchronization
Flash exposure
bracketing
193
3 Setting the Flash FunctionN
Flash mode
When using an external Speedlite, you can select the flash mode to
suit your desired photographic effects.
[E-TTL II] is the standard mode of
EX-series Speedlites for automatic
flash photography.
[Manual flash] is the mode for
advanced users who want to set the
[Flash output] (1/1 to 1/128)
themselves.
Regarding other flash modes, refer to
the instruction manual of a Speedlite
compatible with the respective flash
mode.
Shutter synchronization
Normally, set this to [First-curtain synchronization] so that the
flash fires immediately after the exposure starts.
If [Second-curtain synchronization] is set, the flash will be fired
right before the shutter closes. When this is combined with a slow
shutter speed, you can create a trail of light such as from car
headlights at night with a more natural feel. When second-curtain
synchronization is set together with [E-TTL II], the flash will be fired
twice in a row: once when you press the shutter button completely
and once right before the end of the exposure. Also, if the shutter
speed is 1/30 sec. or faster, first-curtain synchronization will be
applied automatically.
If an external Speedlite is attached, you can also select [High-speed
synchronization] (e). For details, refer to the Speedlite’s
instruction manual.
Flash exposure compensation
See “Flash Exposure Compensation” on page 184.
3 Setting the Flash FunctionN
194
The Custom Functions displayed under [External flash C.Fn setting]
vary depending on the Speedlite model.
1Display the Custom Function.
With the camera ready to shoot with
an external Speedlite, select
[External flash C.Fn setting], then
press <0>.
2Set the Custom Function.
Press the <Y> <Z> keys to select
the function number, then set the
function. The procedure is the same
as setting the camera’s Custom
Functions (p.364).
1Select [Clear settings].
Under the [z2: Flash control] tab,
select [Clear settings], then press
<0>.
2Select the settings to be cleared.
Select [Clear built-in flash set.],
[Clear external flash set.], or [Clear
ext. flash C.Fn set.], then press
<0>.
When you select [OK], the respective
flash settings will be cleared.
Setting the External Speedlite Custom Functions
Clear All Settings to Default
With an EX-series Speedlite, if the [Flash metering mode] Custom
Function is set to [TTL flash metering] (autoflash), the Speedlite will always
fire at full output.
The Speedlite’s Personal Function (P.Fn) cannot be set or canceled on the
camera’s [Flash control] screen. Set it directly on the Speedlite.
195
7
Shooting with the LCD Monitor
(Live View Shooting)
You can shoot while viewing the image on the camera’s
LCD monitor. This is called “Live View shooting”.
If you handhold the camera and shoot while viewing the
LCD monitor, camera shake may cause blurred images.
Using a tripod is recommended in such cases.
Remote Live View Shooting
With EOS Utility (EOS software, p.444) installed on your computer,
you can connect the camera to the computer and shoot remotely
while viewing the computer screen. For details, refer to the EOS
Utility Instruction Manual.
196
1Display the Live View image.
Press the <A> button.
XThe Live View image will appear on
the LCD monitor. In the <A> mode,
the scene icon for the scene detected
by the camera is displayed on the
upper left of the screen (p.201).
The Live View image will be displayed
in the brightness level closely
matching that of the actual image to
be captured.
2Focus on the subject.
When you press the shutter button
halfway, the camera will focus with
the current AF method (p.214).
You can also tap on the screen to
select the face or subject (p.224).
3Take the picture.
Press the shutter button completely.
XThe picture is taken and the captured
image is displayed on the LCD
monitor.
XWhen the playback display ends, the
camera will return to Live View
shooting automatically.
Press the <A> button to exit the
Live View shooting.
A Shooting with the LCD Monitor
The image’s field of view is approx. 100% (with image-recording quality
set to JPEG 73 and aspect ratio set to 3:2).
In Creative Zone modes, you can check the depth of field by pressing the
depth-of-field preview button.
You can also use a Wireless Remote Control BR-E1 (sold separately) or
Remote Switch RS-60E3 (sold separately) for Live View shooting (p.382,
385).
197
A Shooting with the LCD Monitor
Set [z4: Live View shoot.] (the [z1]
tab in Basic Zone modes) to [Enable].
Number of Possible Shots with Live View Shooting
(Approx. number of shots)
The figures above are based on a fully-charged Battery Pack LP-E17 and CIPA
(Camera & Imaging Products Association) testing standards.
With a fully-charged Battery Pack LP-E17, continuous Live View shooting is
possible for approx. 2 hr. 15 min. at room temperature (23°C / 73°F).
During Live View shooting, if you perform <i> Continuous shooting
with One-Shot AF, keep holding down the shutter button completely to
display (play back) the captured images continuously. When the
continuous shooting ends (shutter button is returned to halfway
position), the Live View image will be displayed.
3 Enabling Live View Shooting
Temperature Room Temperature
(23°C / 73°F)
Low Temperatures
(0°C / 32°F)
No Flash 290 260
50% Flash Use 260 240
Continuous Shooting Display
Depending on the shooting conditions such as when shooting with flash or
shooting long exposures, the captured images may not be displayed (played
back) continuously.
A Shooting with the LCD Monitor
198
In the <8: x> mode, Live View shooting is not possible.
In the <8: q> mode, the angle of view changes slightly in Live View
shooting because distortion correction is applied.
In the <8: FG> and <v: ABCD> modes, the image area
will be smaller.
For flash photography, the continuous shooting speed will become
slower.
Do not point the camera toward an intense light source, such as the sun
or an intense artificial light source. Doing so may damage the image
sensor or the camera’s internal components.
General Live View Shooting Cautions are on pages 230-231.
When flash is used, there will be two shutter sounds, but only one shot
will be taken. Also, the time it takes to take the picture after you press the
shutter button completely will be longer than with viewfinder shooting.
If the camera is not operated for a prolonged period, the power will turn
off automatically after the time set in [52: Auto power off] (p.288). If
[52: Auto power off] is set to [Disable], Live View shooting will end
automatically after 30 min. (Camera power remains on.)
With the HDMI cable, you can display the Live View image on a TV set
(p.333). Note that no sound will be output. If the picture does not appear
on the TV screen, check if the [53: Video system] is correctly set to
[For NTSC] or [For PAL] (depending on the video system of your TV
set).
199
A Shooting with the LCD Monitor
Each time you press the <B> button, the information display will
change.
* The number will be displayed when the maximum burst decreases to nine or
lower.
Information Display
ISO speed
Metering mode
AF point (Live 1-point AF)
AEB/FEB/Multi Shot
Noise Reduction
Histogram display
Drive mode
AE lock
Flash-ready/Flash off
Auto Lighting
Optimizer
GPS connection indicator
Wi-Fi signal strength/
Eye-Fi card transmission status
Shooting mode
Exposure level indicator/AEB range
Magnified view
Touch Shutter
Quick Control
White balance/
White balance
correction
Creative filters
Battery level
Picture Style
Image-recording
quality
Highlight tone priority
Exposure
simulation
AF method
Possible shots
AF operation
Aperture
Maximum burst*
Bluetooth function
Wi-Fi function
Shutter speed
Flash exposure compensation
A Shooting with the LCD Monitor
200
You can display the histogram by pressing the <B> button. However,
the histogram is not displayed while pressing the shutter button
completely.
When <g> is displayed in white, it indicates that the Live View image
is displayed at the brightness level closely matching that of the actual
image to be captured.
If <g> is blinking, it indicates that the Live View image is displayed at
a brightness that differs from the actual shooting result because of low-
or bright-light conditions. However, the actual image recorded will reflect
the exposure setting. Note that the noise may be more noticeable than
the actual image recorded.
Exposure simulation is not performed in <8: FG> modes, when
Multi Shot Noise Reduction is set, when flash is used, or when bulb
exposure is used. The <g> icon and histogram will be displayed in
gray. The image is displayed on the LCD monitor with standard
brightness. Also, the histogram may not be properly displayed in low- or
bright-light conditions.
The <g> icon will also be displayed in gray in the <v:
ABCD> modes. The histogram will not be displayed.
Do not hold the camera in the same position for long periods of time.
Even if the camera does not feel too hot, prolonged contact with the same
body part may cause skin redness or blistering due to low-temperature
contact burns. Using a tripod is recommended when using the camera in
very hot places or for people with circulation problems or poor skin
sensation.
201
A Shooting with the LCD Monitor
In the <A> shooting mode, the camera detects the scene type and
sets everything automatically to suit the scene. The detected scene
type is indicated on the upper left of the screen.
*1: Displayed only when the AF method is set to [u+Tracking]. If another AF
method is set, the “Non-portrait” icon will be displayed even if a person is
detected.
*2: Displayed when the attached lens has distance information. With an extension
tube or close-up lens, the icon displayed may not match the actual scene.
*3: The icon of the scene selected from the detectable scenes will be displayed.
Scene Icons
Subject Portrait*1 Non-Portrait
Background
Color
Background
Movement Nature and
Outdoor Scene Movement
Close*2
Bright
Gray
Backlit
Blue Sky
Included Light blue
Backlit
Sunset *3 *3 Orange
Spotlight
Dark blue
Dark
With
Tripod
*4*5 *3 *4*5 *3
For certain scenes or shooting conditions, the icon displayed may not match
the actual scene.
A Shooting with the LCD Monitor
202
*4: Displayed when all the following conditions apply:
The shooting scene is dark, it is a night scene, and the camera is mounted on
a tripod.
*5: Displayed with any of the lenses below:
• EF-S18-55mm f/3.5-5.6 IS II • EF-S55-250mm f/4-5.6 IS II
• EF300mm f/2.8L IS II USM • EF400mm f/2.8L IS II USM
• EF500mm f/4L IS II USM • EF600mm f/4L IS II USM
• Image Stabilizer lenses released in and after 2012.
*4+*5:If the conditions in both *4 and *5 are met, the shutter speed will slow down.
Final image simulation is a function that shows the Live View image with
the effects of the current settings for Picture Style, white balance, and
other shooting functions applied.
The Live View image will automatically reflect the function settings listed
below. However, it may be slightly different from the resulting image.
Final Image Simulation During Live View Shooting
Picture Style
* Sharpness (Strength), contrast, color saturation, and color tone will be
reflected.
White balance
White balance correction
Ambience-based shots (in <C> mode)
Background blur (in <C> mode)
* You can check the effect only during the setting procedure (when
[Simulating blur] is displayed).
Color tone (in <P> mode)
Brightness
Metering mode
Exposure
Depth of field (with depth-of-field preview button ON)
Auto Lighting Optimizer
Peripheral illumination correction
Chromatic aberration correction
Distortion correction
Highlight tone priority
Aspect ratio (Image area confirmation)
Final Image Simulation
203
Function settings particular to Live View shooting are described here.
In Creative Zone modes, if you press the <Q> button with the image
displayed on the LCD monitor, you can set AF method, AF operation,
Drive mode, Metering mode, Image quality, White balance, Picture
Style, Auto Lighting Optimizer, and Creative filters.
In Basic Zone modes, you can set the functions shown in the table on
pages 107-108 (except background blur) as well as the functions in bold
above.
1Press the <Q> button (7).
XThe settable functions will be
displayed.
2 Select a function and set it.
Press the <W> <X> keys to select a function.
XThe settings of the selected function and Feature guide (p.56)
will appear on the screen.
Press the <Y> <Z> keys to set the function.
In the <8> and <v> modes, select the shooting mode box
on the upper left of the screen, then press <0> to select the
shooting mode.
To set Auto white balance, select [Q], then press <0>.
To set the drive mode’s <q> setting, WB correction/WB
bracketing, Picture Style parameters, or Creative filter effects,
press the <B> button.
Shooting Function Settings
Q Quick Control
Shooting Function Settings
204
3Exit the setting.
Press <0> to finalize the setting
and return to Live View shooting.
You can also select [2] to return to
Live View shooting.
In Creative Zone modes, you can set the ISO speed by pressing the
<g> button.
When you set w (Partial metering) or r (Spot metering), a metering
circle will be displayed at the center of the screen.
With Live View shooting, you cannot set <B> and <M> in drive mode
or self-timer.
205
While viewing the Live View image, you can apply one of seven filter
effects (Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water
painting effect, Toy camera effect, and Miniature effect) for shooting.
The camera saves only the image with the Creative filter applied. You
can also take a picture without a Creative filter, then apply an effect
afterward and save it as a new image (p.356).
1Turn the Mode Dial to a Creative
Zone mode.
2Press the <Q> button (7).
XThe Quick Control screen will appear.
3Select [x].
Press the <W> <X> keys to select
[x] (Creative filter) on the right side
of the screen.
4Select a filter effect.
Press the <Y> <Z> keys to select a
filter effect (p.207).
XThe image will be displayed with the
effects of the filter applied.
U Shooting with Creative Filter EffectsN
U Shooting with Creative Filter EffectsN
206
5Adjust the filter effect.
Press the <B> button (except for
c).
Press the <Y> <Z> keys to adjust
the effect, then press <0>.
6Take the picture.
XThe image is shot with the filter effect
applied.
When you set a Creative filter, single shooting will take effect even if the
drive mode is set to <i>.
You cannot shoot with Creative filters if the recording quality is 1 or
1+73, or if AEB, white balance bracketing, or Multi Shot Noise
Reduction is set.
The histogram is not displayed when you shoot with Creative filters.
207
U Shooting with Creative Filter EffectsN
G Grainy B/W
Creates a grainy black-and-white photo. You can change the black-
and-white effect by adjusting the contrast.
W Soft focus
Gives the image a soft look. You can change the degree of softness
by adjusting the blur.
X Fish-eye effect
Gives the effect of a fish-eye lens. The image will have a barrel-type
distortion.
Depending on the level of this filter effect, the area trimmed along
the periphery of the image changes. Also, since this filter expands
the center part of the image, the resolution at the center may
decrease depending on the number of recorded pixels. Check the
image on the screen when setting this filter. Note that the AF method
will be Live 1-point AF (fixed at center).
Y Art bold effect
Makes the photo look like an oil painting and the subject look more
three-dimensional. You can adjust the contrast and saturation. Note
that subjects such as the sky or white walls may not be rendered
with a smooth gradation and may look irregular or have significant
noise.
Z Water painting effect
Makes the photo look like a watercolor painting with soft colors. You
can control the color density by adjusting the filter effect. Note that
night scenes or dark scenes may not be rendered with a smooth
gradation and may look irregular or have significant noise.
Creative Filter Characteristics
U Shooting with Creative Filter EffectsN
208
H Toy camera effect
Darkens the photo’s corners and applies a unique color tone that
makes it look as if it was shot by a toy camera. You can change the
color cast by adjusting the color tone.
c Miniature effect
Creates a diorama effect.
If you want the image center to look sharp, take the picture without
changing any setting.
To move the area that looks sharp (miniature effect frame), see
“Adjusting Miniature Effect” (p.105). The AF method will be Live 1-
point AF. Positioning the miniature effect frame over the AF point
before shooting is recommended.
With Grainy B/W, the grainy effect displayed on the LCD monitor will look
different from the grainy effect recorded in the picture.
With the Soft focus and Miniature effect, the blurred effect displayed on
the LCD monitor may look different from the blurred effect recorded in
the picture. You can check the picture’s blurred effect by pressing the
depth-of-field preview button.
209
When the camera is set for Live View
shooting, menu options exclusive to Live
View shooting will appear under the
[z5] tab (the [z2] tab in Basic Zone
modes).
AF method
You can select [u+Tracking], [Smooth zone], or [Live 1-point AF].
See pages 214-223 for the AF method.
Touch Shutter
Just by tapping on the LCD monitor screen, you can focus and take
the picture automatically. For details, see page 224.
Metering timerN
You can change how long the exposure setting is displayed (AE lock
time). In Basic Zone modes, metering timer is fixed at 8 sec.
Grid display
With [3x3 l] or [6x4 m], you can display grid lines to help you
level the camera vertically or horizontally. Also, with [3x3+diag n],
the grid is displayed together with diagonal lines to help you
compose with better balance by aligning the intersections over the
subject.
3 Menu Function Settings
Selecting [z4: Dust Delete Data] or either [Clean manually] or [Clean
nowf] under [53: Sensor cleaning] will stop the Live View shooting. To
start Live View shooting again, press the <A> button.
3 Menu Function Settings
210
Aspect ratioN
You can change the image’s aspect ratio. [3:2] is set by default. The
area surrounding the Live View image is masked in black when the
following aspect ratios are set: [4:3] [16:9] [1:1].
JPEG images will be saved with the set aspect ratio. RAW images
will always be saved with the [3:2] aspect ratio. The selected aspect
ratio information is added to the RAW image file. When you process
the RAW image with Digital Photo Professional (EOS software), this
allows you to generate an image with the same aspect ratio that was
set for shooting. In the case of the [4:3], [16:9], and [1:1] aspect
ratios, the lines to indicate the aspect ratio will appear during image
playback, but they are not actually drawn on the image.
Image
Quality
Aspect Ratio and Pixel Count (Approx.)
3:2 4:3 16:9 1:1
3/1
6000x4000
(24 megapixels)
5328x4000*
(21.3 megapixels)
6000x3368*
(20.2 megapixels)
4000x4000
(16 megapixels)
43984x2656
(10.6 megapixels)
3552x2664
(9.5 megapixels)
3984x2240*
(8.9 megapixels)
2656x2656
(7.1 megapixels)
a2976x1984
(5.9 megapixels)
2656x1992
(5.3 megapixels)
2976x1680*
(5 megapixels)
1984x1984
(3.9 megapixels)
b2400x1600
(3.8 megapixels)
2112x1600*
(3.4 megapixels)
2400x1344*
(3.2 megapixels)
1600x1600
(2.6 megapixels)
The image-recording quality and aspect ratio with an asterisk do not
exactly match the indicated ratio.
The image area displayed for the asterisked aspect ratio may be slightly
different from the actual image area. Check the captured images on the
LCD monitor when shooting.
211
You can select the AF (autofocus) operation characteristics to suit the
shooting conditions or subject. In Basic Zone modes, the optimum AF
operation is set automatically for the respective shooting mode.
1Press the <Q> button.
XThe Quick Control screen will appear.
2Select [X].
Press the <W> <X> keys to select
[X] (AF operation) on the left
side of the screen.
3Select the AF operation.
Press the <Y> <Z> keys to select
the desired AF operation, then press
<0>.
X: One-Shot AF
K: Servo AF
4Focus on the subject.
Aim the AF point over the subject and
press the shutter button halfway. The
camera will then autofocus in the
selected AF operation.
Changing the Autofocus OperationN
Settable only for Live View shooting (not settable for movie shooting).
If focus cannot be achieved, the AF point will turn orange. If this occurs,
the picture cannot be taken even if the shutter button is pressed
completely. Recompose the shot and try to focus again. Or, see
“Shooting Conditions that Make Focusing Difficult” (p.221).
Changing the Autofocus OperationN
212
Suited for still subjects. When you press the shutter button
halfway, the camera will focus only once.
When focus is achieved, the AF point will turn green and the beeper
will sound.
The focus remains locked while you hold down the shutter button
halfway, allowing you to recompose the image before taking the
picture.
When the drive mode is set to <i> for continuous shooting, the
maximum continuous shooting speed is approx. 5.0 shots/sec.
For flash photography, the continuous shooting speed will become
slower (max. approx. 1.4 shots/sec.).
One-Shot AF for Still Subjects
If [53: Beep] is set to [Disable], the beeper will not sound when focus is
achieved.
213
Changing the Autofocus OperationN
This AF operation is suited for moving subjects. While you hold
down the shutter button halfway, the camera will keep focusing on
the subject continuously.
When the drive mode is set to <i> for continuous shooting, the
maximum continuous shooting speed is approx. 3.5 shots/sec. The
pictures will be taken with priority given to subject tracking.
For flash photography, the continuous shooting speed will become
slower (max. approx. 1.4 shots/sec.).
When focus is achieved, the AF point will turn blue.
The exposure is set at the moment the picture is taken.
When [AF method] is set to [u+Tracking], focusing will be
continuous as long as the Area AF frame can track the subject.
Servo AF for Moving Subjects
Depending on the lens used, the distance to the subject and the subject’s
speed, the camera may not be able to achieve correct focus.
Zooming during continuous shooting may throw off the focus. Zoom first,
then recompose and shoot.
With Servo AF, the beeper will not sound even when focus is achieved.
214
You can select an AF method to suit the shooting conditions and your
subject. The following AF methods are provided: [u(face)+Tracking]
(p.215), [Smooth zone] (p.217), and [Live 1-point AF] (p.219).
If you want to achieve precise focus, set the lens’s focus mode switch to
<MF>, magnify the image, and focus manually (p.228).
Select the AF method.
Under the [z5] tab (the [z2] tab in
Basic Zone modes), select [AF
method].
Select the desired AF method, then
press <0>.
While the Live View image is
displayed, you can also press the
<Q> button to select the AF method
on the Quick Control screen (p.203).
3 Focusing with AF
Selecting the AF Method
The descriptions on pages 215-219 assume that [AF operation] is set to
[One Shot AF] (p.212). With [Servo AF] (p.213) set, the AF point will
turn blue when focus is achieved.
In the <8: C5> modes, Servo AF is set automatically, and when
focus is achieved, the AF point will turn blue and the beeper will sound.
Regarding the Touch Shutter (AF and shutter release by touch
operation), see page 224.
215
3 Focusing with AF
The camera detects and focuses on human faces. If a face moves, the
AF point <p> also moves to track the face.
1Display the Live View image.
Press the <A> button.
XThe Live View image will appear on
the LCD monitor.
XThe Area AF frame will appear.
2Check the AF point.
When a face is detected, <p> will
appear over the face to be focused
on.
If multiple faces are detected, <q>
will be displayed. Use <Y> <Z> to
move <q> over the face you want
to focus on.
You can also tap on the LCD monitor
screen to select the face or subject. If
you tap on a subject other than a
human face, the AF point will be
switched to <z>.
3Focus on the subject.
Press the shutter button halfway to
focus.
XIf no faces can be detected or if you
do not tap anything on the screen,
focus will be achieved within the Area
AF frame.
XWhen focus is achieved, the AF point
will turn green and the beeper will
sound.
XIf focus is not achieved, the AF point
will turn orange.
u(face)+Tracking: c
Area AF frame
3 Focusing with AF
216
4Take the picture.
Check the focus and exposure, then
press the shutter button completely to
take the picture (p.196).
Focusing on a subject other than a human face
If you press the <L> button, the AF point <z> will appear at the
screen center, and you can use the <V> cross keys to move the AF
point. Once the AF point <z> achieves focus, the AF point will also
move to track the subject if you change the composition or if the
subject moves.
If the subject’s face is significantly out of focus, face detection will not be
possible. Adjust the focus manually (p.228) so that the face can be
detected, then perform AF.
An object other than a human face may be detected as a face.
Face detection will not work if the face is very small or large in the
picture, too bright or too dark, or partially hidden.
The <p> may cover only a part of the face, not the whole face.
Use the Area AF frame as a guide to focus within the Area AF frame.
The size of the AF point changes depending on the subject.
217
3 Focusing with AF
The selected Zone AF frame is used to focus. The AF area is larger
than with [Live 1-point AF].
1Display the Live View image.
Press the <A> button.
XThe Live View image will appear on
the LCD monitor.
2Select the AF point.
Use the <V> cross keys to select a
zone. To return to the center zone,
press the <L> button.
You can also touch the LCD monitor
screen to move the Zone AF frame.
3Focus on the subject.
Aim the Zone AF frame over the
subject and press the shutter button
halfway.
XWhen focus is achieved, the AF point
will turn green and the beeper will
sound.
XIf focus is not achieved, the Zone AF
frame will turn orange.
Smooth Zone: o
Zone AF frame
219
3 Focusing with AF
The camera focuses with a single AF point. This is effective when you
want to focus on a particular subject.
1Display the Live View image.
Press the <A> button.
XThe Live View image will appear on
the LCD monitor.
XThe AF point < > will appear.
During movie shooting, if [Movie
Servo AF] is set to [Enable], a larger
AF point will be displayed.
2Move the AF point.
Press the <V> cross keys to move
the AF point to where you want to
focus. (It cannot go to the edge of the
screen.)
Pressing the <L> button will return
the AF point to the screen center.
You can also touch the LCD monitor
screen to move the AF point.
3Focus on the subject.
Aim the AF point over the subject and
press the shutter button halfway.
XWhen focus is achieved, the AF point
will turn green and the beeper will
sound.
XIf focus is not achieved, the AF point
will turn orange.
4Take the picture.
Check the focus and exposure, then
press the shutter button completely to
take the picture (p.196).
Live 1-point AF: d
AF point
3 Focusing with AF
220
AF Operation
Even when focus is achieved, pressing the shutter button halfway
will focus again.
The image brightness may change during and after the AF
operation.
Depending on the subject and shooting conditions, it may take
longer to focus, or the continuous shooting speed may decrease.
If the light source changes while the Live View image is displayed,
the screen may flicker and focusing may be difficult. If this happens,
exit Live View shooting and perform AF under the actual light source
under which you are shooting.
Notes for AF
If you cannot achieve focus with AF, set the lens’s focus mode switch to
<MF> and focus manually (p.228).
If you shoot the subject at the periphery and it is slightly out of focus,
recompose to move the subject (and AF point) toward the screen center,
focus again, then take the picture.
The AF-assist beam will not be emitted. However, if an EX-series
Speedlite (sold separately) equipped with an LED light is used, the LED
light will turn on for AF-assist as necessary.
With certain lenses, it may take more time to achieve focus with
autofocus, or accurate focusing may not be achieved.
221
3 Focusing with AF
Shooting Conditions that Make Focusing Difficult
Subject with low-contrast such as the blue sky, solid-color flat
surfaces or when highlight or shadow details are clipped.
Subjects in low light.
Stripes and other patterns where there is contrast only in the
horizontal direction.
Subjects with repetitive patterns (Example: Skyscraper windows,
computer keyboards, etc.).
Fine lines and subject outlines.
Under a light source whose brightness, color, or pattern keeps
changing.
Night scenes or points of light.
The image flickers under fluorescent or LED lighting.
Extremely small subjects.
Subjects at the edge of the screen.
Strongly backlit or reflective subjects (Example: Car with a highly
reflective body, etc.).
Near and distant subjects covered by an AF point (Example: Animal
in a cage, etc.).
Subjects that keep moving within the AF point and will not stay still
due to camera shake or subject blur.
Performing AF when the subject is very far out of focus.
Soft focus effect is applied with a soft focus lens.
A special effect filter is used.
Noise (dots of light, banding, etc.) appears on the screen during AF.
3 Focusing with AF
222
In the [Smooth zone] and [Live 1-point
AF] modes, either press the <u> button
or tap on [Y] displayed on the bottom
right of the screen to magnify the image
by approx. 5x or 10x and check the
focus.
Magnified view is not possible with
[u+Tracking].
To move the AF point, press the <V> cross keys or tap on the spot
you want to magnify.
Either press the <u> button or tap on [Y] to magnify the area
covered by the magnifying frame. Each time you press the <u>
button or tap on [Y], the magnification ratio changes.
The magnifying frame will appear at the center of the Zone AF frame
when [Smooth zone] is set, and it will appear around the position of
the AF point when [Live 1-point AF] is set.
At 100% (approx. 1x) magnification, press the <V> cross keys or
touch the screen to move the magnifying frame. Pressing the <L>
button will return the magnifying frame to the screen center.
When the image is magnified by approx. 5x or 10x, you can change
the magnified area by pressing the <V> cross keys or tapping on
the triangle on the screen top, bottom, left, or right.
When you press the shutter button halfway, the normal view will
return for [Smooth zone]. For [Live 1-point AF], AF will proceed
with the magnified view.
With Servo AF, if you press the shutter button halfway in the
magnified view, the camera will return to the normal view for
focusing.
Magnified View
223
3 Focusing with AF
If focusing is difficult in the magnified view, return to the normal view and
perform AF.
If you perform AF in the normal view and then use the magnified view,
accurate focus may not be achieved.
AF speed differs between normal view and magnified view.
When in magnified view, Movie Servo AF (p.273) will not function.
With the magnified view, achieving focus becomes more difficult due to
camera shake. Using a tripod is recommended.
224
Just by tapping on the LCD monitor screen, you can focus and take the
picture automatically.
1Display the Live View image.
Press the <A> button.
XThe Live View image will appear on
the LCD monitor.
2Enable the Touch Shutter.
Tap [y] on the screen’s bottom left.
Each time you tap on the icon, it will
toggle between [y] and [x].
[x] (Touch Shutter: Enable)
The camera will focus on the spot you
tap on, then the picture will be taken.
[y] (Touch Shutter: Disable)
You can tap on a spot to perform
focusing on the spot (Touch AF).
Press the shutter button completely to
take the picture.
3Tap on the screen to shoot.
Tap on the face or subject on the
screen.
XOn the point you tap, the camera will
focus with the AF method that was
set (p.214-219). When [Smooth
zone] is set, it will switch to [Live
1-point AF].
XWhen focus is achieved, the AF point
turns green and the picture is taken
automatically.
If focus is not achieved, the AF point
turns orange and the picture cannot
be taken. Tap on the face or subject
on the screen again.
x Shooting with the Touch Shutter
225
x Shooting with the Touch Shutter
Even if you set the drive mode to <i>, the camera will still shoot in the
single shooting mode.
Even if [AF operation] is set to [Servo AF], tapping on the screen will
focus on the image with [One-Shot AF].
Tapping on the screen in magnified view will not focus or take the picture.
If the Fish-eye effect Creative filter is set, the camera will focus using the
AF point at the center of the screen regardless of the point you tap on.
If the Miniature effect Creative filter is set, the Touch Shutter does not
work.
You can also set the Touch Shutter with [z5: Touch Shutter] (the [z2]
tab in Basic Zone modes).
To shoot with bulb exposure, tap on the screen twice. The first tap on the
screen will start the bulb exposure. Tapping it again will stop the
exposure. Be careful not to shake the camera when tapping on the
screen.
226
The Self Portrait mode processes the image to suit human subjects. In
this mode, you can also adjust the background blur and brightness
when shooting.
1Display the Live View image.
Press the <A> button.
XThe Live View image will appear on
the LCD monitor.
2Face the LCD monitor toward the
front of the camera.
As shown in the illustration, flip out
the LCD monitor and face it toward
the front of the camera (p.41).
3Tap [g] on the screen.
Enable the self portrait.
4Take the picture.
When using the Touch Shutter:
Set to [x] (Touch Shutter: Enable)
(p.224).
Tap on the spot where you want to
focus, then take the picture.
g Taking a Self Portrait (Selfie)
227
g Taking a Self Portrait (Selfie)
When using the shutter button:
Press the shutter button halfway to
focus, then press it completely to take
the picture.
After the camera achieves focus, do not change the distance between
you and the camera until the picture is taken.
Be careful not to drop the camera.
Flash photography is not possible. Try to prevent camera shake when
shooting in low-light conditions.
The Self Portrait mode will be canceled when you set the camera switch
to <2> or do any of the following:
• Tapping [g] on the screen.
• Rotating the LCD monitor back to its original position.
• Pressing the <A> button.
228
You can magnify the image and focus precisely with MF (manual focus).
1Set the lens’s focus mode switch
to <MF>.
Turn the lens focusing ring to focus
roughly.
2Display the magnifying frame.
Press the <u> button.
XThe magnifying frame will appear.
You can also tap [1] on the screen to
magnify the image.
3Move the magnifying frame.
Press the <V> cross keys to move
the magnifying frame to where you
want to focus.
Pressing the <L> button will return
the magnifying frame to the screen
center.
4Magnify the image.
Each time you press the <u> button,
the magnification of the image will
change in the following sequence:
MF: Focusing Manually
Magnifying frame
AE lock
Magnified area position
Magnification
1x 9 5x 9 10x 9 Normal view
229
MF: Focusing Manually
5Focus manually.
While looking at the magnified image,
turn the lens focusing ring to focus.
After achieving focus, press the <u>
button to return to the normal view.
6Take the picture.
Check the focus and exposure, then
press the shutter button to take the
picture (p.196).
In magnified view, the exposure is locked. (Shutter speed and aperture
will be displayed in red.)
Even with manual focusing, you can use the Touch Shutter to take a
picture.
230
General Live View Shooting Cautions
Image Quality
When you shoot at high ISO speeds, noise (such as dots of light and
banding) may become noticeable.
Shooting in high temperatures may cause noise and irregular colors in
the image.
If Live View shooting is used continuously for a prolonged period, the
camera’s internal temperature may rise, and image quality may
deteriorate. Always exit Live View shooting when you are not shooting.
If you shoot a long exposure while the camera’s internal temperature is
high, image quality may deteriorate. Exit Live View shooting and wait a
few minutes before shooting again.
White <s> and Red <E> Internal Temperature Warning Icons
If the camera’s internal temperature increases due to prolonged Live
View shooting or under a high ambient temperature, a white <s> or red
<E> icon will appear.
The white <s> icon indicates that the image quality of still photos will
deteriorate. It is recommended that you temporarily exit Live View
shooting and allow the camera to cool down before shooting again.
The red <E> icon indicates that the Live View shooting will soon stop
automatically. If this happens, you will not be able to shoot again until the
camera’s internal temperature decreases. Temporarily exit the Live View
shooting or turn off the power and let the camera rest for a while.
Using Live View shooting at a high temperature for a prolonged period
will cause the <s> or <E> icon to appear earlier. When you are not
shooting, always turn off the camera.
If the camera’s internal temperature is high, the quality of images shot
with a high ISO speed or long exposure may deteriorate even before the
white <s> icon is displayed.
Shooting Results
If you take the picture in magnified view, the exposure may not come out
as desired. Return to the normal view before taking the picture. In
magnified view, the shutter speed and aperture will be displayed in
orange. Even if you take the picture in magnified view, the image will be
captured with the image area of the normal view.
If you use a TS-E lens (except the TS-E17mm f/4L or TS-E24mm f/3.5L
II) for shifting or tilting the lens or if you use an extension tube, the
standard exposure may not be obtained, or an irregular exposure may
result.
231
General Live View Shooting Cautions
Live View Image
Under low- or bright-light conditions, the Live View image may not reflect
the brightness of the captured image.
Even if a low ISO speed is set, noise may be noticeable in the displayed
Live View image under low light. However, when you shoot, the image
recorded will have less noise. (The image quality of the Live View image
is different from that of the recorded image.)
If the light source (illumination) within the image changes, the screen
may flicker. If this happens, exit Live View shooting and resume Live
View shooting under the actual light source.
If you point the camera in a different direction, it may throw off the Live
View image’s correct brightness momentarily. Wait until the brightness
level stabilizes before shooting.
If there is a very bright light source in the image, the bright area may
appear black on the LCD monitor. However, the actual captured image
will correctly show the bright area.
In low light, if you set the [52: LCD brightness] to a bright setting, noise
or irregular colors may appear in the Live View image. However, the
noise or irregular colors will not be recorded in the captured image.
When you magnify the image, the image sharpness may look more
pronounced than in the actual image.
If the shutter speed is 1 sec. or slower, “BUSY” is displayed on the LCD
monitor, and the Live View display will not appear until the exposure is
complete.
Custom Functions
During Live View shooting, certain Custom Function settings will not take
effect (p.365).
Lens and Flash
If the attached lens has an Image Stabilizer and you set the Image
Stabilizer (IS) switch to <1>, the Image Stabilizer will operate at all
times even if you do not press the shutter button halfway. The Image
Stabilizer consumes battery power and may decrease the number of
possible shots depending on the shooting conditions. When the Image
Stabilizer is not necessary, such as when using a tripod, it is
recommended that you set the IS switch to <2>.
The focus preset function is possible for Live View shooting only when
using a (super) telephoto lens equipped with the focus preset mode
released in and after the second half of 2011.
FE lock will not work if the built-in flash is used. FE lock and modeling
flash will not work if an external Speedlite is used.
232
233
8
Shooting Movies
Movie shooting is enabled by setting
the power switch to <k>.
For cards that can record movies, see page 8.
If you handhold the camera and shoot movies, camera
shake can cause blurred movies. In such a case, using a
tripod is recommended.
To shoot while handholding the camera, see page 76.
Full HD 1080
Full HD 1080 indicates compatibility with High-
Definition featuring 1080 vertical pixels (scanning
lines).
234
Connecting the camera to a TV set is recommended to play back the
shot movies (p.333-335).
When the shooting mode is set to any mode other than <
a
>,
autoexposure control will take effect to suit the scene’s current brightness.
1Set the power switch to <k>.
XThe reflex mirror will make a sound,
then the image will appear on the
LCD monitor.
2Set the Mode Dial to a mode other
than <8>, <v>, or <a>.
3Focus on the subject.
Before shooting a movie, focus with
AF or manual focus (p.214-223, 228).
By default, [Movie Servo AF:
Enable] is set so that the camera
always keeps focusing. To stop Movie
Servo AF, see page 273.
4Shoot the movie.
Press the <A> button to start
shooting a movie. To stop movie
shooting, press the <A> button
again.
XWhile the movie is being shot, the
“o” mark will be displayed on the
upper right of the screen.
XSound will be recorded by the built-in
microphones.
k Shooting Movies
Autoexposure Shooting
Recording movie
Built-in microphones
235
k Shooting Movies
General Movie Shooting Cautions are on pages 278-279.
If necessary, also read “General Live View Shooting Cautions” on
pages 230-231.
In Basic Zone modes (except the <8> and <v> modes), the
shooting result will be the same as with <A>. Also, the scene icon for
the scene detected by the camera is displayed on the upper left (p.237).
In the <f> and <s> shooting modes, the settings will be the same
as when shooting in the <d> mode.
Settable menu functions differ between Basic Zone modes and Creative
Zone modes (p.410).
Shutter speed, aperture and ISO speed are set automatically.
In Creative Zone modes, you can press the <A> button (p.178) to lock
the exposure (AE lock). The exposure setting will be displayed for the
number of seconds set with [z4: Metering timer]. After applying AE
lock during movie shooting, you can cancel it by pressing the <S>
button. (AE lock setting is retained until you press the <S> button.)
In Creative Zone modes, you can turn the <6> dial while holding down
the <g> button to set the exposure compensation.
If you shoot a movie with autoexposure, the shutter speed, aperture and
ISO speed will not be recorded in the movie’s Exif information.
With autoexposure movie shooting (except in time-lapse movie
shooting), the camera will automatically turn on the Speedlite’s LED light
under low-light conditions. For details, refer to the Instruction Manual of
the EX-series Speedlite equipped with an LED light.
k Shooting Movies
236
ISO Speed in Basic Zone Modes
The ISO speed will be set automatically within ISO 100 - ISO 12800.
ISO Speed in the <d>, <s>, and <f> Modes
The ISO speed will be set automatically within ISO 100 - ISO 12800.
The maximum limit varies depending on the [kISO Auto] setting
(p.277).
Under [54: Custom Functions(C.Fn)], if [2: ISO expansion] is set
to [1:On], [Max.:H(25600)] can also be selected for [kISO Auto].
Under [54: Custom Functions(C.Fn)], if [4: Highlight tone
priority] is set to [1:Enable], the ISO speed will be ISO 200 - ISO
12800.
When switching from still photo shooting to movie shooting, check the ISO
speed settings again before shooting movies.
237
k Shooting Movies
During movie shooting in Basic Zone modes (except the <8> and
<v> modes), an icon representing the scene detected by the camera
will be displayed, and the shooting will be performed to suit the scene.
For certain scenes or shooting conditions, the icon displayed may not
match the actual scene.
*1: • Displayed only when the AF method is set to [u+Tracking]. If another AF
method is set, the “Non-portrait” icon will be displayed even if a person is
detected.
• During time-lapse movie shooting, the “Non-portrait” icon will be displayed
even if a person is detected.
*2: Displayed when the attached lens has distance information. With an extension
tube or close-up lens, the icon displayed may not match the actual scene.
*3: The icon of the scene selected from the detectable scenes will be displayed.
Scene Icons
Subject
Portrait*1
Non-Portrait Background
Color
Background
Nature and
Outdoor Scene Close*2
Bright
Gray
Backlit
Blue Sky Included
Light blue
Backlit
Sunset *3 *3 Orange
Spotlight
Dark blue
Dark
k Shooting Movies
238
In the <a> mode, you can manually set the shutter speed, aperture,
and ISO speed for movie shooting. Using manual exposure to shoot
movies is for advanced users.
1Set the power switch to <k>.
XThe reflex mirror will make a sound,
then the image will appear on the
LCD monitor.
2Set the Mode Dial to <a>.
3 Set the ISO speed.
Press the <g> button and press
the <Y> <Z> keys or turn the <6>
dial to select the ISO speed.
For details on the ISO speed, see the
next page.
4Set the shutter speed and
aperture.
To set the shutter speed, turn the
<6> dial. The settable shutter
speeds vary depending on the frame
rate.
•5 4: 1/4000 sec. - 1/25 sec.
•6: 1/4000 sec. - 1/30 sec.
•7: 1/4000 sec. - 1/50 sec.
•8: 1/4000 sec. - 1/60 sec.
To set the aperture, turn the <6>
dial while holding down the <g>
button.
Manual Exposure Shooting
<6>
<g> + <6>
239
k Shooting Movies
5Focus and shoot the movie.
The procedure is the same as steps 3
and 4 for “Autoexposure Shooting”
(p.234).
ISO Speed During Manual Exposure Shooting
With [
AUTO
], the ISO speed will be set automatically within
ISO 100 - ISO 12800. The maximum limit varies depending on the
[
kISO Auto
] setting (p.
277
).
You can set the ISO speed manually within ISO 100 - ISO 12800 in
whole-stop increments. Under [54: Custom Functions(C.Fn)], if
you set [2: ISO expansion] to [1:On], the maximum limit of the
manual ISO speed setting range will be expanded so you can also
select H (equivalent to ISO 25600).
Under [54: Custom Functions(C.Fn)], if [4: Highlight tone
priority] is set to [1:Enable], the ISO speed will be ISO 200 -
ISO 12800.
Since shooting a movie at ISO 25600 equivalent may result in much
noise, it is designated as an expanded ISO speed (displayed as “H”).
When switching from still photo shooting to movie shooting, check the
camera settings again before shooting movies.
Changing the shutter speed or aperture during movie shooting is not
recommended since the changes in the exposure will be recorded.
When shooting a movie of a moving subject, a shutter speed of approx.
1/30 sec. to 1/125 sec. is recommended. The faster the shutter speed,
the less smooth the subject’s movement will look.
If you change the shutter speed while shooting under fluorescent or LED
lighting, image flicker may be recorded.
If you set [5:Expo comp (hold btn, turn S)] with [9: Assign SET
button] under [54: Custom Functions(C.Fn)] (p.371), you can use
exposure compensation with ISO Auto set.
When ISO Auto is set, you can press the <A> button to lock the ISO
speed.
If you press the <A> button and recompose the shot, you can see the
exposure level difference on the exposure level indicator (p.240)
compared to when the <A> button is pressed.
By pressing the <B> button, you can display the histogram.
k Shooting Movies
240
Each time you press the <B> button, the information display will
change.
* Applies to a single movie clip.
Information Display
Picture Style
Quick Control
AF point (Live 1-point AF)
Exposure level indicator
Aperture
Shutter speed
White balance
Movie shooting mode/
Scene icon
y: Autoexposure
(Basic Zone
modes)
k: Autoexposure
(Creative Zone
modes)
M: Manual exposure
u: HDR movie
l: Creative filters
N: Time-lapse
movie
Movie recording size
AE lock
AF method
•c: u+Tracking
•o: Smooth zone
•d: Live 1-point AF
Battery level
Frame rate
ISO speed
Recording level (manual)
Wi-Fi signal strength/
Eye-Fi card transmission status
Auto Lighting
Optimizer
Movie shooting remaining time*/Elapsed time
Wi-Fi function
Wind filter: Disable
Attenuator
Digital zoom
Movie Servo AF
GPS connection
indicator
Magnify/
Digital zoom
Exposure compensation
Movie recording format
Creative filters
Highlight tone priority
Video snapshot
Bluetooth function
241
k Shooting Movies
Final image simulation is a function that shows the movie as it will look
with the current settings for the Picture Style, white balance and other
shooting functions applied.
During movie shooting, the image displayed will automatically show the
effects of the settings listed below.
Final Image Simulation for Movie Shooting
Picture Style
* Sharpness (Strength), contrast, color saturation, and color tone will be
reflected.
White balance
White balance correction
Exposure
Depth of field
Auto Lighting Optimizer
Peripheral illumination correction
Chromatic aberration correction
Highlight tone priority
HDR movie
Creative filters
Final Image Simulation
The grid lines, or histogram cannot be displayed during movie shooting.
(The display will disappear when you start shooting a movie.)
When movie shooting starts, the movie shooting remaining time will
change to the elapsed time.
k Shooting Movies
242
Still photos cannot be taken during movie shooting. To take still
photos, stop the movie shooting and take still photos using viewfinder
shooting or Live View shooting.
Still Photo Shooting
Cautions for Movie Shooting
Do not point the camera toward an intense light source, such as the sun
or an intense artificial light source. Doing so may damage the image
sensor or the camera’s internal components.
When you press the shutter button halfway to autofocus during movie
shooting, the following phenomena may occur.
• Focus may become far off momentarily.
• The brightness of the recorded movie may change.
• The recorded movie may be momentarily still.
• The movie may record the lens mechanical sound.
If <Q> or <Qw> is set and the ISO speed or aperture changes during
movie shooting, the white balance may also change.
If you shoot a movie under fluorescent or LED lighting, the movie image
may flicker.
Shooting a few test movies is recommended if you intend to perform
zooming during movie shooting. Zooming during movie shooting may
result in recording of changes in exposure or mechanical sound of the
lens, or images may be out of focus.
During movie shooting, you cannot magnify the image even if you press
the <u> button.
Be careful not to cover the built-in microphones (p.234) with your fingers,
etc.
If you connect or disconnect the HDMI cable during movie shooting, the
movie shooting will end.
General Movie Shooting Cautions are on pages 278-279.
If necessary, also read “General Live View Shooting Cautions” on
pages 230-231.
Do not hold the camera in the same position for long periods of time.
Even if the camera does not feel too hot, prolonged contact with the same
body part may cause skin redness or blistering due to low-temperature
contact burns. Using a tripod is recommended when using the camera in
very hot places or for people with circulation problems or very sensitive skin.
243
k Shooting Movies
Notes for Movie Shooting
Each time you shoot a movie, a new movie file is created on the card.
The movie image’s field of view is approx. 100% (with movie recording
size set to [1920x1080]).
Stereo sound is recorded by the camera’s built-in microphones.
If you connect the Directional Stereo Microphone DM-E1 (sold
separately) to the camera’s external microphone IN terminal (p.28), the
external microphone is given the priority.
Most external microphones equipped with a 3.5 mm diameter mini plug
can be used.
With a fully-charged Battery Pack LP-E17, the possible movie shooting
time will be as follows: approx. 2 hr. at room temperature (23°C / 73°F) and
approx. 1 hr. 45 min. at low temperatures (0°C / 32°F) (with movie
recording size set to
L6
/
5X
and [
z4: Movie Servo AF:
Disable
] set).
The focus preset function is possible for movie shooting when using a
(super) telephoto lens equipped with the focus preset mode, released in
and after the second half of 2011.
244
Function settings particular to movie shooting are described here.
If you press the <Q> button when the image is displayed on the LCD
monitor, you can set AF method, Movie rec. size, Digital zoom, Video
snapshot, White balance, Picture Style, Auto Lighting Optimizer, and
Creative filters.
In Basic Zone modes, only the functions in bold above can be set.
1Press the <Q> button (7).
XThe settable functions will be
displayed.
2Select a function and set it.
Press the <W> <X> keys to select a
function.
XThe settings of the selected function
and Feature guide (p.56) will appear
on the screen.
Press the <Y> <Z> keys to set the
function.
To set Auto white balance, select
[Q], then press <0>.
To set the WB correction, Picture
Style parameters, or Creative filters,
press the <B> button.
Pressing <0> will return the
camera to movie shooting.
You can also select [2] to return to
movie shooting.
Shooting Function Settings
Q Quick Control
245
With [z1: Movie rec. size], you can set
the movie recording size (image size,
frame rate, and compression method)
and other functions.
Movies will be recorded in the MP4
format.
Image size
L 1920x1080
Full High-Definition (Full HD) recording quality. The aspect ratio is
16:9.
w 1280x720
High-Definition (HD) recording quality. The aspect ratio is 16:9.
x 640x480
Standard-definition recording quality. The aspect ratio is 4:3.
Frame rate (fps: frame per second)
6 29.97 fps/8 59.94 fps
For areas where the TV system is NTSC (North America, Japan,
South Korea, Mexico, etc.).
5 25.00 fps/7 50.00 fps
For areas where the TV system is PAL (Europe, Russia, China,
Australia, etc.).
4 23.98 fps
Mainly for motion pictures.
3 Setting the Movie Recording Size
The frame rate displayed on the movie recording size screen switches
depending on whether [53: Video system] is set to [For NTSC] or [For
PAL]. 4 (23.98 fps) can be selected only when [For NTSC] is set.
If you change the [53: Video system] setting, set the movie recording
size again.
3 Setting the Movie Recording Size
246
Compression method
X IPB (Standard)
Compresses multiple frames at a time efficiently for recording.
Xv IPB (Light)
Since the movie is recorded at a low bit rate for playback on various
devices, the file size will be smaller than with IPB (Standard).
Therefore, you can shoot longer than with IPB (Standard).
Total Movie Recording Time and File Size Per Minute (Approx.)
Movie Recording Size Total Recording Time on Card File Size
4 GB 16 GB 64 GB
L
[1920x
1080]
87
Standard
8 min. 35 min. 2 hr. 21 min. 431 MB/min.
654
Standard
17 min. 1 hr. 10 min. 4 hr. 41 min. 216 MB/min.
65
Light
43 min. 2 hr. 53 min. 11 hr. 35 min. 87 MB/min.
w
[1280x
720]
87
Standard
20 min. 1 hr. 21 min. 5 hr. 24 min. 184 MB/min.
65
Light
2 hr. 5 min. 8 hr. 20 min. 33 hr. 22 min. 30 MB/min.
x
[640x
480]
65
Standard
57 min. 3 hr. 50 min. 15 hr. 20 min. 66 MB/min.
65
Light
2 hr. 43 min. 10 hr. 53 min. 43 hr. 32 min. 23 MB/min.
HDR movie (p.249)
17 min. 1 hr. 10 min. 4 hr. 41 min. 216 MB/min.
Time-lapse movie (p.254)
5 min. 23 min. 1 hr. 34 min. 643 MB/min.
An increase in the camera’s internal temperature may cause movie shooting
to stop before the total recording time shown in the table above (p.278).
247
3 Setting the Movie Recording Size
Movie Files Exceeding 4 GB
Even if you shoot a movie exceeding 4 GB, you can keep shooting
without interruption.
Using SD/SDHC cards formatted with the camera
If you use the camera to format an SD/SDHC card, the camera will
format it in FAT32.
With a FAT32-formatted card, if you shoot a movie and the file size
exceeds 4 GB, a new movie file will be created automatically.
When you play back the movie, you will have to play each movie file
individually. Movie files cannot be played back automatically in
consecutive order. After the movie playback ends, select the next
movie and play it back.
Using SDXC cards formatted with the camera
If you use the camera to format an SDXC card, the camera will
format it in exFAT.
When using an exFAT-formatted card, even if the file size exceeds 4
GB during movie shooting, the movie will be saved as a single file
(rather than being split into multiple files).
Movie Shooting Time Limit
The maximum recording time of one movie clip is 29 min. 59 sec. If the
movie shooting time reaches 29 min. 59 sec., the movie shooting will
stop automatically. You can start shooting a movie again by pressing
the <A> button. (The movie will be recorded as a new movie file.)
When downloading movie files exceeding 4 GB to a computer, use either
the EOS Utility (p.444) or a card reader (p.448). Movie files exceeding 4 GB
will not be downloaded if you perform image download with the function of
the computer’s operating system.
248
When the recording size is L6/4 (NTSC) or L5 (PAL),
you can shoot with an approx. 3x to 10x digital zoom.
1Set the Mode Dial to a mode other
than <8> or <v>.
2Select [Digital zoom].
Under the [z1] tab, select [Digital
zoom], then press <0>.
3Select [Approx. 3-10x zoom].
Select [Approx. 3-10x zoom], then
press <0>.
Press the <M> button to exit the
menu and return to movie shooting.
4Use digital zoom.
Press the <W> <X> keys.
XThe digital zoom bar will appear.
Press the <W> key to zoom in or
press the <X> key to zoom out.
When you press the shutter button
halfway, the camera will focus with
[Live 1-point AF] (fixed at center).
To cancel digital zoom, set [Disable]
in step 2.
3 Using Movie Digital Zoom
Using a tripod to prevent camera shake is recommended.
Time-lapse movie and Creative filter cannot be set.
The maximum ISO speed will be ISO 6400.
Magnified view is not possible.
Since Movie digital zoom processes the image digitally, the image will
look grainier at higher magnifications. Noise, dots of light, etc. may also
become noticeable.
The scene icon will not be displayed.
Also see “Shooting Conditions that Make Focusing Difficult” on page
221.
249
You can reduce the clipped highlights of bright areas, which may make
details hard to see, as you shoot movies even in high-contrast scenes.
The recording size is L6X (NTSC) or L5X (PAL).
1Set the Mode Dial to <8>.
2Shoot an HDR movie.
u Shooting HDR Movies
Since multiple frames are merged to create an HDR movie, certain parts
of the movie image may look distorted. During handheld shooting,
camera shake may make the distortion look more noticeable. Using a
tripod is recommended. Note that even if a tripod is used for shooting,
afterimages or noise may become more noticeable when the HDR movie
is played back frame-by-frame or in slow-motion compared to normal
playback.
Movie digital zoom, video snapshot, and time-lapse movie cannot be set.
250
In the <v> (Creative filters) mode, you can shoot movies with one of
five filter effects (Dream, Old Movies, Memory, Dramatic B&W, and
Miniature effect movie).
The recording size can be set to L6/4 (NTSC) or L5
(PAL).
1Set the Mode Dial to <v>.
2Press the <Q> button (7).
XThe Quick Control screen will appear.
3Select [l].
Press the <W> <X> keys to select
[l] (Creative filters) on the upper left
of the screen, then press <0>.
4Select a filter effect.
Press the <W> <X> keys to select a
filter effect (p.251), then press <0>
and select [OK].
XThe image will be displayed with the
effects of the filter applied.
v
Shooting Movies with Creative Filter Effects
251
v Shooting Movies with Creative Filter Effects
5Adjust the filter effect level.
Press the <Q> button and select the
icon below [Creative filters].
Press the <Y> <Z> keys to adjust
the filter effect, then press <0>.
When the Miniature effect movie is
set, select the playback speed.
6Shoot the movie.
l Dream
Creates a soft, dreamy, otherworldly atmosphere. Gives the movie a
soft look overall, blurring the periphery of the screen. You can adjust
the blurry areas along the screen edges.
m Old Movies
Creates an atmosphere like an old film by adding wavering,
scratches, and flickering effects to the image. The top and bottom of
the screen are masked in black. You can modify the wavering and
scratch effects by adjusting the filter effect.
Creative Filter Characteristics
Magnified view is not possible.
The histogram is not displayed.
Movie digital zoom, video snapshot, and time-lapse movie cannot be set.
The color gradation of the sky or white walls may not be reproduced
correctly. Irregular exposure, irregular colors, or noise may appear.
In Creative Zone modes, you can set Creative filters with Quick Control
(p.244).
v Shooting Movies with Creative Filter Effects
252
k Memory
Creates the atmosphere of a distant memory. Gives the movie a soft
look overall, reducing brightness of the periphery of the screen. You
can modify the overall saturation and the dark areas along the
screen edges by adjusting the filter effect.
n Dramatic B&W
Creates an atmosphere of dramatic realism with high-contrast black
and white. You can adjust the graininess and black-and-white effect.
o Miniature effect movie
You can shoot movies having a Miniature (diorama) effect. Select
the playback speed and shoot.
If you want the image center to look sharp, take the picture without
changing any setting.
To move the area where you want to look sharp (miniature effect
frame), see “Adjusting Miniature Effect” (p.105). The AF method will
be Live 1-point AF. Positioning the miniature effect frame over the
AF point before shooting is recommended. During shooting, neither
the AF point nor the miniature effect frame will be displayed.
In step 5, set the playback speed to [5x], [10x], or [20x] and shoot.
Playback Speed and Length (for 1-minute movie)
Speed Playback Length
5x Approx. 12 sec.
10x Approx. 6 sec.
20x Approx. 3 sec.
254
Images shot at a set interval can be stitched together automatically to
create a movie file. A time-lapse movie shows how a subject changes in
a much shorter period of time than the actual time it took. It is effective
for a fixed-point observation of changing scenery, growing plants, etc.
Time-lapse movies are recorded in the MOV format and in L6W
(NTSC) or L5W (PAL) recording size.
1Set the Mode Dial to a mode other
than <8> or <v>.
2Select [Time-lapse movie].
Under the [z5] tab (the [z3] tab in
Basic Zone modes), select [Time-
lapse movie] and press <0>.
3Select [Enable].
N Shooting Time-lapse Movies
Do not point the camera toward an intense light source, such as the sun or
an intense artificial light source. Doing so may damage the image sensor or
the camera’s internal components.
255
N Shooting Time-lapse Movies
4Set the shooting interval and
number of shots.
Check the [
k: Time required
] and
[
3: Playback time
] displayed at the
bottom of the screen to set the
shooting interval and number of shots.
Set the shooting interval
(hours:minutes:seconds) with
[Interval].
Set the number of shots with [No. of shots].
Press <0> so <r> is displayed.
Set the desired number, then press <0>. (Returns to <s>.)
After completing the settings, select [OK] to return to the previous
screen.
Interval
Settable in the range from [00:00:01] to [99:59:59].
Number of shots
Settable in the range from [0002] to [3600]. Set one digit at a time. If
3600 is set, the time-lapse movie will be approx. 2 min. for NTSC
and approx. 2 min. 24 sec. for PAL.
5Set the exposure.
Select [Auto exposure] and set.
Fixed 1st frame
The second and subsequent frames will also be shot with the same
exposure and other shooting function settings as the first frame.
Each frame
Each frame will be shot with the exposure adjusted to match the
brightness of the scene. Note that function settings such as Picture
Style and white balance will automatically be set for each frame
when they are set to [Auto].
T
ime required Playback
time
N Shooting Time-lapse Movies
256
6Set whether to turn off the LCD
monitor automatically.
Select [LCD auto off] and set.
Disable
The Live View image will remain displayed during shooting. Note
that the LCD monitor will turn off when approx. 30 min. elapse after
the shooting started.
Enable
The LCD monitor will turn off approx. 10 sec. after shooting the first
frame.
7Set the beeper for shooting.
Select [Beep as img taken] and set.
If [Disable] is set, the beeper will not
sound for shooting.
8Check the settings.
You can press the <B> button to turn off or on the LCD monitor during
shooting.
T
ime required Playback
time
If [53: Beep] is set to [Disable], the setting in step 7 cannot be set.
257
N Shooting Time-lapse Movies
Time required
Indicates the time required to shoot the set number of shots with the
set interval. If it exceeds 24 hours, “*** days” will be displayed.
Playback time
Indicates the recording time (time required to play back the movie)
when shooting with the set intervals to create the movie in
“L 6 W (NTSC)” or “L 5 W (PAL)” format.
9Exit the menu.
Press the <M> button to turn off
the menu screen.
10
Shoot the time-lapse movie.
Press the shutter button halfway to
check the focus and exposure.
Press the <A> button to start time-
lapse movie shooting.
AF will not work during time-lapse
movie shooting.
Since the electronic shutter is used
for shooting, the reflex mirror and
shutter make no mechanical sound
during time-lapse movie shooting.
When the set number of shots are
taken, the time-lapse movie shooting
will stop and be automatically
canceled.
Shots remaining
Time-lapse movie
N Shooting Time-lapse Movies
258
Using a tripod is recommended.
To cancel the time-lapse movie shooting, press the <A> button. (The
setting will be switched to [Disable].) The time-lapse movie shot so far
will be recorded on the card.
You can play back the shot time-lapse movie with this camera the same
way that you play back normal movies.
If the time required for shooting is more than 24 hours but not more than
48, “2 days” will be indicated. If three or more days are required, the
number of days will be indicated in 24-hour increments.
Even if the time-lapse movie’s playback time is less than 1 sec., a movie
file will still be created. For [Playback time], “00:00:00” will be displayed.
If the shooting time is long, using the household power outlet
accessories (sold separately, p.381) is recommended.
With time-lapse movie set to [Enable], you cannot set [z1: Movie rec.
size] or [53: Video system].
Time-lapse movie shooting cannot be set when Movie digital zoom,
Video snapshot or Creative filter is set, or when Wi-Fi connection is
established.
If the camera is connected to a computer with the interface cable, or if an
HDMI cable is connected to the camera, you cannot select [Enable].
Movie Servo AF will not function.
Regarding the settable shutter speed for manual exposure, see page
238.
With [Interval] set to 3 sec. or less and [Auto exposure] set to [Each
frame], if the brightness of the subject is significantly different from that
for the last shot frame, shooting may not be performed with the set
interval.
If the image is displayed on the LCD monitor during time-lapse movie
shooting, the Live View image will freeze momentarily at the time of
shooting.
Do not zoom the lens during time-lapse movie shooting. Zooming the
lens may cause the image to be out of focus, the exposure to change, or
the lens aberration correction not to function properly.
259
N Shooting Time-lapse Movies
During time-lapse movie shooting, auto power off will not take effect.
Also, you cannot adjust the shooting function and menu function
settings, play back images, etc.
Sound is not recorded for time-lapse movies.
If the next scheduled shot is not possible, it will be skipped. This may
shorten the recording time of the created time-lapse movie.
If the time it takes to record to the card exceeds the interval between
shots due to the shooting functions set or card performance, some of the
shots may not be taken with the set intervals.
If the card does not have enough free space to record the set number of
shots, [Playback time] will be displayed in red. Although the camera can
continue shooting, the shooting will stop when the card becomes full.
If the card has no available capacity, “remaining number of possible
shots” will be displayed in red as [z 0000], and you will not be able to
shoot.
If you connect the camera to a computer with an interface cable and use
EOS Utility (EOS software), set [z5: Time-lapse movie] to [Disable]. If
it is set to [Enable], the camera cannot communicate with the computer.
During time-lapse movie shooting, the lens’s Image Stabilizer will not
operate.
If the power switch is set to <2>, time-lapse movie shooting will be
terminated and the setting will be switched to [Disable].
Even if a flash is used, it will not fire.
Shooting-ready state of the time-lapse movie is canceled and the setting
is switched to [Disable] with the following operations:
• Performing [53: Sensor cleaning] or performing [Clear all camera
settings] under [54: Clear settings].
When time-lapse movie shooting ends, the settings are cleared
automatically, and the camera returns to normal movie shooting.
N Shooting Time-lapse Movies
260
You can shoot time-lapse movies with a fully-charged Battery Pack LP-E17
as shown in the table below (approx. time from start of shooting until the
battery becomes exhausted). The possible shooting time will vary
depending on the shooting conditions.
Total Possible Time for Time-lapse Movie Shooting (Approx.)
* When shooting interval is set to [00:00:03]
LCD Monitor
During Shooting
Room Temperature
(23°C / 73°F)
Low Temperatures
(0°C / 32°F)
Tur ned on 2 hr. 15 min. 2 hr.
Tur ned off 3 hr. 15 min. 3 hr. 10 min.
You can use Wireless Remote Control BR-E1 (sold separately, p.382) to
start and stop the time-lapse movie shooting. Set [z5: Remote control] to
[Enable] beforehand.
If you are using the BR-E1, set the release mode/movie shooting switch to
the <k> position, then press the release button.
261
You can shoot a series of short movie clips lasting approx. 2 sec.,
4 sec., or 8 sec. called video snapshots. The video snapshots can be
joined together into a single movie called a video snapshot album. You
can thereby show short and quick highlights of a trip or event.
A video snapshot album can also be played back together with
background music (p.268, 332).
1Set the Mode Dial to a mode other
than <8> or <v>.
2Select [Video snapshot].
Under the [z5] tab (the [z3] tab in
Basic Zone modes), select [Video
snapshot] and press <0>.
3Select [Enable].
3 Shooting Video Snapshots
Setting the Video Snapshot Shooting Duration
Video Snapshot Album Concept
Video snapshot album
Video
snapshot 1
Video
snapshot 2
Video
snapshot **
3 Shooting Video Snapshots
262
4Select [Album settings].
5Select [Create a new album].
6Select the snapshot length.
Press <0> and use the <W> <X>
keys to select the snapshot’s length,
then press <0>.
7Select [OK].
Press the <M> button to exit the
menu.
XA blue bar will appear to indicate the
snapshot length.
Go to “Creating a Video Snapshot
Album” (p.263).
Shooting duration
263
3 Shooting Video Snapshots
8Shoot the first video snapshot.
Press the <A> button, then shoot.
XThe blue bar indicating the shooting
duration will gradually decrease. After
the set shooting duration elapses, the
shooting stops automatically.
XThe confirmation screen will appear
(p.264).
9Save as a video snapshot album.
Select [J Save as album], then
press <0>.
XThe movie clip will be saved as the
video snapshot album’s first video
snapshot.
10
Continue to shoot more video
snapshots.
Repeat step 8 to shoot the next video
snapshot.
Select [J Add to album], then press
<0>.
To create another video snapshot
album, select [W Save as a new
album].
Repeat step 10 as necessary.
11
Exit the video snapshot shooting.
Set [Video snapshot] to [Disable].
To return to normal movie
shooting, be sure to set [Disable].
Press the <M> button to exit the
menu, and return to the normal movie
shooting.
Creating a Video Snapshot Album
3 Shooting Video Snapshots
264
Options in Steps 9 and 10
Function Description
JSave as album (Step 9) The movie clip will be saved as the video
snapshot album’s first video snapshot.
JAdd to album (Step 10)
The video snapshot just recorded will be
added to the album recorded immediately
before.
WSave as a new album
(Step 10)
A new video snapshot album is created and
the movie clip is saved as the first video
snapshot. The new album will be a different
file from the previously recorded album.
1Playback video snapshot
(Step 9 and 10)
The video snapshot just recorded will be
played back. For playback operations, see the
table on the next page.
rDo not save to album
(Step 9)
rDelete without saving to
album (Step 10)
The video snapshot just recorded will be
erased instead of being saved to the album.
Select [OK] on the confirmation dialog.
If you want to shoot another video snapshot
right after shooting one video snapshot, set
[Show confirm msg] to [Disable]. This
setting will allow you to immediately shoot the
next video snapshot without the confirmation
screen appearing after you shoot each time.
265
3 Shooting Video Snapshots
[Playback video snapshot] Operations in Steps 9 and 10
*With [Skip backward] and [Skip forward], the skipping length corresponds to
the number of seconds set under [Video snapshot] (approx. 2 sec., 4 sec., or
8 sec.).
Function Playback Description
7 Play By pressing <0>, you can play back or pause the video
snapshot recorded immediately before.
5 First frame Displays the first scene of the album’s first video snapshot.
P Skip backward* Each time you press <0>, the video snapshot skips
back by a few seconds.
3 Previous frame Displays the previous frame each time you press <0>.
Holding <0> down will rewind the movie.
6 Next frame Plays the movie frame-by-frame each time you press
<0>. Holding <0> down will fast forward the movie.
O Skip forward* Each time you press <0>, the video snapshot skips
forward by a few seconds.
4 Last frame Displays the last scene of the album’s last video snapshot.
Playback position
mm’ ss” Playback time (minutes:seconds)
9 Volume Turn the <6> dial to adjust the volume of the built-in
speaker (p.326).
32Pressing the <M> button returns to the previous
screen.
3 Shooting Video Snapshots
266
1Select [Add to existing album].
Follow step 5 on page 262 to select
[Add to existing album], then press
<0>.
2Select an existing album.
Press the <Y> <Z> keys to select
an existing album, then press <0>.
Select [OK], then press <0>.
XCertain video snapshot settings will
change to match the existing album’s
settings.
Press the <M> button to exit the
menu.
XThe video snapshot shooting screen
will appear.
3Shoot the video snapshot.
See “Creating a Video Snapshot
Album” (p.263) to shoot the video
snapshot.
Adding to an Existing Album
You cannot select an album shot with another camera.
267
3 Shooting Video Snapshots
Cautions for Shooting Video Snapshots
You can add to an album only the video snapshots with the same
duration (approx. 2 sec., 4 sec., or 8 sec. each).
Note that if you do any of the following while shooting video snapshots, a
new album will be created for subsequent video snapshots.
• Changing the [Movie rec. size].
• Changing the [Sound rec.] setting from [Auto]/[Manual] to [Disable]
or from [Disable] to [Auto]/[Manual].
• Updating the firmware.
The shooting duration of a video snapshot is only approximate.
Depending on the frame rate, the shooting duration displayed during
playback may not be exact.
3 Shooting Video Snapshots
268
You can play back a video snapshot album in the same way as a normal
movie (p.326).
1Play back the movie.
Press the <x> button to display an
image.
2Select the album.
In the single-image display, the
[Ot] icon displayed on the upper
left of the screen indicates a video
snapshot album.
Press the <Y> <Z> keys to select
an album.
3Play back the album.
Press the <g> button.
On the movie playback panel
displayed, select [7] (Play), then
press <0>.
Playing Back an Album
Background Music
You can play background music when you play back albums, normal
movies, and slide shows on the camera (p.327, 332). To play
background music, you must first copy the background music to the card
using EOS Utility (EOS software). For information on how to copy the
background music, refer to the EOS Utility Instruction Manual.
Music recorded on the memory card must be used only for private
enjoyment. Do not violate the rights of the copyright holder.
269
3 Shooting Video Snapshots
After shooting, you can rearrange, delete, or play back the video
snapshots in the album.
1Select [X].
On the movie playback panel
displayed, select [X] (Edit), then
press <0>.
XThe editing screen will be displayed.
2Select an editing operation.
Select an editing option, then press
<0>.
Editing an Album
Function Description
T Move snapshot
Press the <Y> <Z> keys to select the video snapshot
you want to move, then press <0>. Press the <Y>
<Z> keys to move the snapshot, then press <0>.
L Delete snapshot
Press the <Y> <Z> keys to select the video snapshot
you want to delete, then press <0>. The [L] icon will
be displayed on the selected video snapshot. Pressing
<0> again will cancel the selection and [L] will
disappear.
7 Play snapshot Press the <Y> <Z> keys to select the video snapshot
you want to play back, then press <0>.
3 Shooting Video Snapshots
270
3Save the edited album.
Press the <M> button to return to
the Editing panel at the screen
bottom.
Select [W] (Save), then press
<0>.
XThe save screen will appear.
To save it as a new album, select
[New file]. To save it and overwrite
the original album, select
[Overwrite], then press <0>.
If the card does not have enough free space, [New file] will not be
available.
When the battery level is low, editing albums is not possible. Use a fully-
charged battery.
271
When the power switch is set to <k>, the [z1], [z4], and [z5] tabs
will be displayed as the menu options exclusive to movie shooting (the
[z1], [z2], and [z3] tabs in Basic Zone modes).
z1
Movie recording size
You can set the movie recording size (image size, frame rate, and
compression method). For details, see page 245.
Digital zoom
You can use digital zoom for telephoto shooting. For details, see
page 248.
Sound recordingN
Normally, the built-in microphones will
record the sound in stereo. If the
Directional Stereo Microphone DM-E1
(sold separately) is connected to the
camera’s external microphone IN
terminal (p.28), the external microphone
will be given the priority.
3 Menu Function Settings
z1z4z5
Level meter
3 Menu Function Settings
272
[Sound rec./Rec. level] options
[Auto] : The sound-recording level is adjusted automatically.
Auto level control will operate automatically in
response to the sound level.
[Manual] : For advanced users. You can adjust the sound-
recording level to one of 64 levels.
Select [Rec. level] and press the <Y> <Z> keys
while looking at the level meter to adjust the sound-
recording level. Look at the peak hold indicator
(approx. 3 sec.), and adjust so that the level meter
sometimes lights up on the right of the “12” (-12 dB)
mark for the loudest sounds. If it exceeds “0”, the
sound will be distorted.
[Disable] : Sound will not be recorded.
[Wind filter]
When set to [Auto], it reduces wind noise when there is wind
outdoors. This feature works only when you use the built-in
microphones for movie shooting. When the wind filter function
takes effect, part of the low bass sounds will also be reduced.
[Attenuator]
Automatically suppresses sound distortion caused by loud noises.
Even if [Sound rec.] is set to [Auto] or [Manual] for shooting,
sound distortion may still result if there is a very loud sound. In
such a case, setting it to [Enable] is recommended.
If you use the Wi-Fi (wireless communication) function with an external
microphone, the sound noise may be recorded. During sound recording,
using the wireless communication function is not recommended.
In Basic Zone modes, the settings available for [Sound recording] will
be [On]/[Off]. If [On] is set, the sound-recording level will be adjusted
automatically (same as with [Auto]), and the wind filter function will take
effect.
The sound volume balance between L (left) and R (right) cannot be
adjusted.
For both L and R, audio is recorded at a 48 kHz/16-bit sampling rate.
273
3 Menu Function Settings
Lens aberration correctionN
You can set peripheral illumination correction and chromatic
aberration correction. For details, see page 153.
Lens electronic MFN
When a lens equipped with an electronic manual focusing function is
used, see page 118.
z4
Movie Servo AF
With this function enabled, the camera focuses on the subject
continuously during movie shooting. The default setting is [Enable].
When [Enable] is set:
The camera focuses on the subject continuously even when you
are not pressing the shutter button halfway.
If you want to keep the focus at a specific point or if you do not
want the lens mechanical sound to be recorded, you can
temporarily stop Movie Servo AF as follows.
• Tap [Z] on the screen’s bottom left.
• Press the <D> button.
• Under [54: Custom Functions(C.Fn)], if [8: Shutter/AE lock
button] is set to [2:AF/AF lock, no AE lock], you can pause the
Movie Servo AF while holding down the <A> button. When you
let go of the <A> button, Movie Servo AF will resume.
When Movie Servo AF is paused, if you return to movie shooting
after operations such as pressing the <M> or <x> button or
changing the AF method, Movie Servo AF will resume.
When [Disable] is set:
Press the shutter button halfway to focus.
3 Menu Function Settings
274
AF method
The AF methods are the same as described on pages 214-223. You
can select [u+Tracking], [Smooth zone], or [Live 1-point AF].
Metering timerN
You can change how long the exposure setting is displayed (AE lock
time).
Cautions When [Movie Servo AF] is Set to [Enable]
Shooting Conditions that Make Focusing Difficult
• A fast-moving subject approaching or moving away from the camera.
• A subject moving at a close distance to the camera.
• Also see “Shooting Conditions that Make Focusing Difficult” on page
221.
Since the lens is driven continuously and battery power is consumed, the
possible movie shooting time (p.246) will be shortened.
With certain lenses, the mechanical sound for focusing may be recorded.
In such a case, using Directional Stereo Microphone DM-E1 (sold
separately) may reduce such sounds in the movie. Also, using certain
USM lenses (for example, the EF-S18-135mm f/3.5-5.6 IS USM) or
certain STM lenses (for example, the EF-S18-55mm f/4-5.6 IS STM) will
reduce the lens mechanical sound that is recorded.
Movie Servo AF will pause during zooming or magnified view.
During movie shooting, if a subject approaches or moves away or if the
camera is moved vertically or horizontally (panning), the recorded movie
image may momentarily expand or contract (change in image
magnification).
If you want to set the lens’s focus mode switch to <MF> during Movie
Servo AF, first set the camera’s power switch to <1>.
275
3 Menu Function Settings
Grid display
With [3x3 l] or [6x4 m], you can display grid lines to help you
level the camera vertically or horizontally before shooting. Also, with
[3x3+diag n], the grid is displayed together with diagonal lines to
help you compose with better balance by aligning the intersections
over the subject.
Note that the grid is not displayed on the LCD monitor during movie
shooting.
V button function
You can set the functions performed by pressing the shutter button
halfway or completely during movie shooting.
If [a/k] or [q/k] is set, besides pressing the <A> button, you
can start or stop the movie shooting by pressing the shutter button
completely or by using Remote Switch RS-60E3 (sold separately,
p.385).
Setting Pressing halfway Pressing completely
a/- Metering and AF No function
q/- Metering only No function
a/kMetering and AF Starts/stops movie
shooting
q/kMetering only Starts/stops movie
shooting
During movie shooting, the [V btn function] setting overrides any function
assigned to the shutter button with [8: Shutter/AE lock button] under [54:
Custom Functions(C.Fn)].
3 Menu Function Settings
276
z5
Video snapshot
You can shoot video snapshots. For details, see page 261.
Time-lapse movie
You can shoot time-lapse movies. For details, see page 254.
Remote control shooting
When [Enable] is set, you can start or stop movie shooting using
Wireless Remote Control BR-E1 (sold separately, p.382).
If you are using the BR-E1, set the release mode/movie shooting
switch to the <k> position, then press the release button.
277
3 Menu Function Settings
ISO Speed During Movie ShootingN
You can set the ISO speed separately for still photo shooting and movie
shooting. Set under the [z2] tab.
[kISO speed]
In manual exposure, you can set the ISO
speed (p.239).
[kISO Auto]
You can set the maximum limit of the
automatic ISO speed for ISO Auto to ISO
6400 or ISO 12800.
Under [54: Custom Functions(C.Fn)],
if [2: ISO expansion] is set to [1:On],
you can select [Max.:H(25600)].
278
General Movie Shooting Cautions
Red <E> Internal Temperature Warning Icon
If the camera’s internal temperature increases due to prolonged movie
shooting or under a high ambient temperature, a red <E> icon will
appear.
The red <E> icon indicates that movie shooting will soon be terminated
automatically. If this happens, you will not be able to shoot again until the
camera’s internal temperature decreases. Turn off the power and let the
camera rest for a while.
Shooting a movie at a high temperature for a prolonged period will cause
the <E> icon to appear earlier. When you are not shooting, always turn
off the camera.
Recording and Image Quality
If the attached lens has an Image Stabilizer and you set the Image
Stabilizer (IS) switch to <1>, the Image Stabilizer will operate at all
times even if you do not press the shutter button halfway. The Image
Stabilizer consumes battery power and may shorten the total movie
shooting time depending on the shooting conditions. When the Image
Stabilizer is not necessary, such as when using a tripod, it is
recommended that you set the IS switch to <2>.
The camera’s built-in microphones will also record the operation sound
and mechanical sound of the camera during shooting. Using the
Directional Stereo Microphone DM-E1 (sold separately) may reduce
these sounds in the movie.
Do not connect anything other than an external microphone to the
camera’s external microphone IN terminal.
If the brightness changes during autoexposure movie shooting, the
movie image may freeze temporarily. In such a case, shoot movies with
manual exposure.
If there is a very bright light source in the image, the bright area may
appear black on the LCD monitor. The movie will be recorded almost
exactly as it appears on the LCD monitor.
In low light, noise or irregular colors may appear in the image. The movie
will be recorded almost exactly as it appears on the LCD monitor.
If you play back a movie with other devices, image or sound quality may
deteriorate or playback may not be possible (even if the devices support
MOV/MP4 format).
279
General Movie Shooting Cautions
Recording and Image Quality
If you use a card with a slow writing speed, a five-level
indicator may appear on the right of the screen during movie
shooting. It indicates how much data has not yet been
written to the card (remaining capacity of the internal buffer
memory). The slower the card, the faster the indicator will
climb upward. If the indicator becomes full, movie shooting
will stop automatically.
If the card has a fast writing speed, the indicator will either
not appear or the level (if displayed) will hardly go upward.
First, shoot a few test movies to see if the card can write fast enough.
Playback and TV Connection
If you connect the camera to a TV set (p.333) and shoot a movie, the TV
set will not output any sound during the shooting. However, the sound
will be properly recorded.
Indicator
Restrictions on MP4-format Movies
Note that generally, the following restrictions apply to MP4-format movies.
Sound will not be recorded for approx. the last two frames.
When you play back movies on Windows, movie images and sound may
become slightly out of synchronization.
280
281
9
Handy Features
Geotagging Images (p.282)
Disabling the Beeper (p.287)
Card Reminder (p.287)
Setting the Image Review Time (p.288)
Setting the Auto Power Off Time (p.288)
Adjusting the LCD Monitor Brightness (p.289)
Creating and Selecting a Folder (p.290)
File Numbering Methods (p.292)
Setting the Copyright Information (p.295)
Auto Rotation of Vertical Images (p.297)
Reverting the Camera to the Default Settings (p.298)
Turning the LCD Monitor Off/On (p.301)
Automatic Sensor Cleaning (p.302)
Appending Dust Delete Data (p.304)
Manual Sensor Cleaning (p.306)
282
Using the GPS Receiver GP-E2 (sold separately) or a Bluetooth-
compatible smartphone, you can append location information to
images.
1Attach the GP-E2 to the camera.
Attach the GP-E2 to the camera’s hot
shoe (p.28) and turn it on. For details,
refer to the GP-E2 Instruction
Manual.
2Select [GPS device settings].
Under the [52] tab, select [GPS
device settings].
3Select [GPS receiver].
Select [GPS receiver] in [Select GPS
device].
4Take the picture.
The location information acquired
with the GP-E2 will be appended to
the images.
For the details of [Set up], refer to the
GP-E2 Instruction Manual.
3 Geotagging Images
When Using GP-E2
Cautions for Using GP-E2
At first, check the countries and regions where the use of GPS is
allowed, and follow their legal restrictions.
Update the GP-E2 firmware to Version 2.0.0 or later. When updating the
firmware, the interface cable (sold separately, p.401) is required. For how
to update the GP-E2 firmware, refer to the Canon Web site.
The GP-E2 cannot be connected to the camera with the cable that
comes with the GP-E2.
Note that the digital compass cannot be used with this camera. (Shooting
direction will not be recorded.)
283
3 Geotagging Images
The dedicated application Camera Connect (free of charge) must be
installed on the smartphone. For details on how to install Camera
Connect, refer to the Wi-Fi (Wireless Communication) Function
Instruction Manual.
Setting up Smartphone on GPS Device
1Turn on the smartphone’s
location information function.
2Start Camera Connect.
Tap on the smartphone’s Camera
Connect icon to start it.
3Connect to Bluetooth.
Connect the camera and a
smartphone via Bluetooth. For
details, refer to the Wi-Fi Instruction
Manual.
4Select [GPS device settings].
Under the [52] tab, select [GPS
device settings].
When Using a Smartphone
3 Geotagging Images
284
5Select [Smartphone].
Select [Smartphone] in [Select GPS
device].
XAcquiring the location information
from the smartphone becomes
possible.
On the [GPS device settings]
screen, select [GPS information
display] to check the acquired
geotag information (latitude,
longitude, elevation, and Coordinated
Universal Time: UTC).
6Take the picture.
The location information acquired by
the smartphone will be appended to
the image.
285
3 Geotagging Images
GPS Connection Display
With the Quick Control screen’s GPS connection indicator (p.32), you
can check the status of location information acquisition from the
smartphone.
• Gray: Location information acquisition interrupted.*
• Blinking: Location information not acquired.
• On: Location information acquired.
* This status indicates that a Bluetooth connection was established between the
camera and the smartphone, but either the smartphone is unable to acquire
the location information or the Bluetooth connection has been terminated.
Regarding the GPS connection indicator status for when the GP-E2 is
used, refer to the GP-E2 Instruction Manual.
Geotagging the Image when Taking Pictures
When you take a picture with the location information already acquired,
the location information will be appended to the image.
Location Information Appended to the Image
On the shooting information screen, you can check the location
information appended to the captured image. For details, see page 111.
UTC (Coordinated Universal Time)
Elevation
Longitude
Latitude
3 Geotagging Images
286
[52: GPS device settings] cannot be selected if the camera is
connected to a computer with an interface cable.
The smartphone can acquire location information only when the camera
is connected to a smartphone via Bluetooth.
Direction information is not acquired.
The acquired location information may not be accurate depending on the
travel conditions and the smartphone’s status.
After the location information is acquired, doing any of the following will
erase the acquired location information.
• Setting [Bluetooth function] to a setting other than [Smartphone].
• Turning off the camera.
• Terminating Camera Connect.
• Turning off the smartphone’s location information function.
After the location information is acquired, any of the following conditions
will erase the acquired location information.
• The camera power turns off.
• Bluetooth connection is terminated.
• The smartphone’s remaining battery power is low.
If you operate the smartphone and establish a Wi-Fi connection when
the camera is in the auto power off state, location information may not be
acquired. Note that if the location data is acquired, the GPS connection
indicator will light up on the Quick Control screen.
Coordinated Universal Time, abbreviated as UTC, is essentially the
same as Greenwich Mean Time.
When shooting a movie, the GPS information at the starting time of the
movie shooting is appended.
287
You can prevent the beeper from sounding when focus is achieved,
during self-timer shooting, and during touch operations.
Under the [53] tab, select [Beep], then
press <0>. Select [Disable], then
press <0>.
To silence the beeper only for touch
operations, select [Touch n].
This setting prevents shooting if there is no card in the camera.
Under the [z1] tab, select [Release
shutter without card], then press
<0>. Select [Disable], then press
<0>.
If there is no card inserted in the camera
and you press the shutter button, “Card”
will be displayed in the viewfinder, and
you cannot release the shutter.
Handy Features
3 Disabling the Beeper
3 Card Reminder
Handy Features
288
You can change how long the image is displayed on the LCD monitor
immediately after shooting. If [Off] is set, the image will not be displayed
immediately after shooting. If [Hold] is set, the image review will be
displayed up until the [Auto power off] time has elapsed.
Note that during image review, if you operate any camera controls such
as pressing the shutter button halfway, the image review will end.
Under the [z1] tab, select [Image
review], then press <0>. Select the
desired setting, then press <0>.
To save battery power, the camera turns off automatically after a set time
of idle operation elapses. When the camera is turned off due to auto
power off, you can turn it on again by pressing the shutter button, etc.
If [Disable] is set, either turn off the camera or press the <U>
button to turn off the LCD monitor to save battery power.
Even if [Disable] is set, the LCD monitor will turn off after the
camera is left idle for approx. 30 min. To turn on the LCD monitor
again, press the <U> button.
Under the [52] tab, select [Auto power
off], then press <0>. Select the
desired setting, then press <0>.
3 Setting the Image Review Time
3 Setting the Auto Power Off Time
If [10 sec/30 sec] is set, the camera will turn off after it is left idle for approx.
10 sec. When setting functions or during Live View shooting, movie
shooting, image playback, etc., the auto power off time will be approx. 30
sec.
289
Handy Features
You can adjust the brightness of the LCD monitor to make it easier to
view.
Under the [52] tab, select [LCD
brightness], then press <0>. Press
the <Y> <Z> keys to adjust the
brightness on the adjustment screen,
then press <0>.
When checking the exposure of an
image, set the LCD monitor brightness to
4 and prevent the ambient light from
affecting the image.
3 Adjusting the LCD Monitor Brightness
Handy Features
290
You can freely create and select the folder where the captured images
are to be saved.
This operation is optional since a folder will be created automatically for
saving captured images.
Creating a Folder
1Select [Select folder].
Under the [51] tab, select [Select
folder], then press <0>.
2Select [Create folder].
Select [Create folder], then press
<0>.
3Create a new folder.
Select [OK], then press <0>.
XA new folder with the folder number
increased by one is created.
3 Creating and Selecting a Folder
291
Handy Features
Selecting a Folder
With the folder selection screen
displayed, select a folder and press
<0>.
XThe folder where the captured
images will be saved is selected.
Subsequently captured images will
be recorded into the selected folder.
Number of images in folder
Folder name
Lowest file number
Highest file number
Folders
As with “100CANON” for example, the folder name starts with three digits
(the folder number) followed by five alphanumeric characters. A folder can
contain up to 9999 images (file number 0001 - 9999). When a folder
becomes full, a new folder with the folder number increased by one is
created automatically. Also, if manual reset (p.294) is executed, a new
folder will be created automatically. Folders numbered from 100 to 999 can
be created.
Creating Folders with a Computer
With the card open on the screen, create a new folder named “DCIM”. Open
the DCIM folder and create as many folders as necessary to save and
organize your images. The folder name must follow the format
“100ABC_D”. The first three digits are always the folder number from 100 to
999. The last five characters can be any combination of upper- and lower-
case letters from A to Z, numerals, and the underscore “_”. The space
cannot be used. Also note that two folder names cannot share the same
three-digit folder number (for example, “100ABC_D” and “100W_XYZ”),
even if the last five characters in each name are different.
Handy Features
292
The image files will be numbered from 0001 to 9999 in the order the
images are taken, then saved in a folder. You can change how the file
number is assigned.
The file number will appear on your computer in this format:
IMG_0001.JPG.
In [File numbering] under the [51] tab,
select [Numbering], then press <0>.
The available settings are described
below. Select the option, then press
<0>.
[Continuous]: When you wish to continue the file numbering
sequence even after the card is replaced or a new folder is
created.
Even after you replace the card or create a new folder, the file
numbering continues in sequence up to 9999. This is useful when
you want to save images numbered anywhere between 0001 to
9999 on multiple cards or in multiple folders into one folder on a
computer.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images may
continue from the file numbering of the existing images on the card
or in the folder. If you want to use continuous file numbering, it is
recommended that you use a newly-formatted card each time.
3 File Numbering Methods
File numbering after
replacing the card
Next sequential file number
File numbering after
creating a folder
Card-1Card-1 Card-2
0051 0052 0051 0052
100 101
293
Handy Features
[Auto reset]: When you wish to restart the file numbering from
0001 each time the card is replaced or a new folder is created.
When you replace the card or create a folder, the file numbering
restarts from 0001 for the new images saved. This is useful if you
want to organize images by cards or folders.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images may
continue from the file numbering of the existing images on the card
or in the folder. If you want to save images with the file numbering
starting from 0001, use a newly formatted card each time.
File numbering after
replacing the card
File numbering is reset
File numbering after
creating a folder
Card-1
Card-1 Card-2
0051 0001 0051 0001
100 101
Handy Features
294
[Manual reset]: When you wish to reset the file numbering to
0001 or to start from file number 0001 in a new folder.
In [File numbering] under the [51] tab,
select [Manual reset], then select [OK]
on the confirmation dialog.
When you reset the file numbering manually, a new folder is created
automatically and the file numbering of images saved to that folder
starts from 0001.
This is useful, for example, if you want to use different folders for the
images taken yesterday and the ones taken today. After the manual
reset, the file numbering returns to continuous or auto reset. (There
will be no manual reset confirmation dialog.)
If the file number in folder 999 reaches 9999, shooting will not be possible
even if the card still has storage capacity. The LCD monitor will display a
message telling you to replace the card. Replace it with a new card.
For both JPEG and RAW images, the file name will start with “IMG_”. Movie
file names will start with “MVI_”. The extension will be “.JPG” for JPEG
images, “.CR2” for RAW images, and “.MOV” or “.MP4” for movies.
295
Handy Features
When you set the copyright information, it will be appended to the
image as Exif information.
1Select [Copyright information].
Under the [54] tab, select [Copyright
information], then press <0>.
2Select the item to be set.
Select [Enter author’s name] or
[Enter copyright details], then press
<0>.
3Enter text.
Press the <V> cross keys or turn the
<6> dial to move the n and select
the desired character. Then press
<0> to enter it.
You can enter up to 63 characters.
To delete a character, press the <L>
button.
By selecting [E], you can
change the input mode.
To cancel the text entry, press the
<B> button, then select [OK].
4Exit the setting.
After entering the text, press the
<M> button, then select [OK].
XThe set information is saved.
3 Setting the Copyright InformationN
Character palette
Input mode
Handy Features
296
When you select [Display copyright
info.] in step 2, you can check the
[Author] and [Copyright] information
that you entered.
When you select [Delete copyright information] in step 2, you can
delete the [Author] and [Copyright] information.
Checking the Copyright Information
Deleting the Copyright Information
If the entry for “Author” or “Copyright” is long, it may not be displayed
entirely when you select [Display copyright info.].
If you cannot enter text in step 3, press the <g> button and use the
character palette when the blue frame appears.
You can also set or check the copyright information with EOS Utility
(EOS software, p.444).
297
Handy Features
Images shot in vertical orientation are rotated
automatically to the proper orientation for viewing,
so they will not be displayed in horizontal
orientation when played back on the camera’s LCD
monitor or viewed on a computer screen. You can
change the setting of this feature.
Under the [51] tab, select [Auto rotate],
then press <0>. The available
settings are described below. Select the
option, then press <0>.
[OnzD]: The vertical image is automatically rotated during
playback on both the camera’s LCD monitor and on the
computer screen.
[OnD]:The vertical image is automatically rotated only on the
computer screen.
[Off] : The vertical image is not automatically rotated.
The vertical image is not rotated during the image review just
after shooting.
Press the <
x
> button and the image playback will display the rotated image.
[OnzD] is set, but the image does not rotate during playback.
Auto rotate will not work with vertical images captured while [
Auto
rotate
] was set to [
Off
]. If the vertical image is taken while the camera
is pointed up or down, the image may not be rotated automatically for
playback. In such a case, see “Rotating the Image” on page 316.
On the camera’s LCD monitor, I want to rotate an image
captured when [OnD] had been set.
Set [OnzD], then play back the image. It will be rotated.
The vertical image does not rotate on the computer screen.
The software used is not compatible with image rotation. Use EOS
software instead.
3 Setting the Auto Rotation of Vertical Images
FAQ
Handy Features
298
The camera’s shooting function settings and menu settings can be
reverted to their defaults. This option is available in Creative Zone
modes.
1Select [Clear settings].
Under the [54] tab, select [Clear
settings], then press <0>.
2Select [Clear all camera settings].
Select [Clear all camera settings],
then press <0>.
3Select [OK].
Select [OK], then press <0>.
XThe camera settings will be reset to
the default settings shown on pages
299-300.
Clearing all camera settings
After the procedure above, select [Clear all Custom Func. (C.Fn)]
in [54: Clear settings] to clear all the Custom Function settings
(p.364).
3 Reverting the Camera to the Default SettingsN
FAQ
299
Handy Features
Shooting Function Settings Image Recording Settings
<8> mode 2 (Portrait) Image quality 73
<v> mode G
(Grainy B/W)
Picture Style Auto
AF operation One-Shot AF Auto Lighting
Optimizer Standard
AF point selection
Auto selection
Drive mode
u
(Single shooting)
Lens aberration correction
Peripheral illumination
correction
Enable
Metering mode q (Evaluative
metering)
Chromatic aberration
correction
Enable
zISO speed AUTO (Auto)
zISO Auto Maximum 6400
Distortion correction
Disable
Exposure
compensation/AEB Canceled
Diffraction correction
Enable
Lens electronic MF Disable after
One-Shot AF
Flash exposure
compensation Canceled
White balance Q
Auto:
Ambience priority
Red-eye reduction Disable
Custom Functions Unchanged
Custom White Balance
Canceled
Flash control White balance shift Canceled
Flash firing Enable White balance
bracketing Canceled
E-TTL II flash
metering
Evaluative flash
metering Color space sRGB
Flash sync. speed
in Av mode Auto Long exposure
noise reduction Disable
Display Level Settings High ISO speed
noise reduction Standard
Shooting screen Guided
Menu display Guided File numbering Continuous
Mode guide Enable Auto cleaning Enable
Feature guide Enable Dust Delete Data Erased
Handy Features
300
Camera Settings Live View Shooting Settings
Auto power off 10 sec./30 sec. Live View shooting Enable
Beep Enable Aspect ratio 3 : 2
Release shutter
without card Enable AF method u+Tracking
AF operation X
Image review time 2 sec. Touch Shutter Disable
AF point display Disable Metering timer 8 sec.
Histogram display Brightness Grid display Off
Image jump w/6e (10 images) Creative filters Disable
Auto rotate OnzDMovie Shooting Settings
LCD brightness <v> mode l (Dream)
LCD off/on button Shutter button AF method u+Tracking
Date/Time/Zone Unchanged Movie Servo AF Enable
Language Unchanged
Movie recording
size
NTSC:
L6
(Standard)
PAL:
L5
(Standard)
GPS device settings Disable
Video system Unchanged
Touch control Standard
Copyright information
Unchanged Digital zoom Disable
Control over HDMI Disable kISO speed AUTO (Auto)
Eye-Fi transmission Disable kISO Auto Maximum 12800
Configure: MY MENU
Unchanged Sound recording Auto
Menu display Normal display Wind filter Auto
Wireless communication settings Attenuator Disable
Wi-Fi Disable Grid display Off
Bluetooth function
Disable V button function a/-
Video snapshot Disable
Time-lapse movie Disable
Remote control
shooting Disable
Creative filters Disable
For how to clear all the Custom Function settings, see page 364.
For wireless communication settings, refer to the Wi-Fi (Wireless
Communication) Function Instruction Manual.
301
Handy Features
You can set the camera so that the LCD monitor does not turn off and
on as you press the shutter button halfway (or press the <A> button/
depth-of-field preview button).
Under the [52] tab, select [LCD off/on
btn], then press <0>. The available
settings are described below. Select the
option, then press <0>.
[Shutter btn.] : When you press the shutter button halfway, the
display will turn off. When you let go of the shutter
button, the display will turn on.
[Shutter/DISP] : When you press the shutter button halfway, the
display will turn off. The display will remain off
even after you let go of the shutter button.
To turn on the display, press the <U> button.
[Remains on] : Display remains on even when you press the
shutter button halfway. To turn off the display,
press the <U> button.
3 Turning the LCD Monitor Off/On
302
Whenever you set the power switch to <1> or <2>, the Self
Cleaning Sensor Unit is activated to automatically shake off the dust on
the front of the sensor. Normally, you need not pay attention to this
operation. However, you can manually perform sensor cleaning or can
disable this unit as follows.
1Select [Sensor cleaning].
Under the [53] tab, select [Sensor
cleaning], then press <0>.
2Select [Clean nowf].
Select [Clean nowf], then press
<0>.
Select [OK], then press <0>.
X
The screen will indicate that the sensor
is being cleaned. (A small sound may
be heard.) Although there will be a
mechanical sound of the shutter during
the cleaning, no picture is taken.
f Automatic Sensor Cleaning
Activating the Sensor Cleaning Manually
When Multi Shot Noise Reduction is set, [Clean nowf] cannot be
selected.
For best results, perform the sensor cleaning with the camera placed
upright and stable on a table or other flat surface.
Even if you repeat the sensor cleaning, the result will not improve much.
Immediately after the sensor cleaning is finished, the [Clean nowf]
option remains disabled temporarily.
Dots of light may appear on images if the sensor is affected by cosmic
rays, etc. By selecting [Clean nowf], their appearance may be
suppressed (p.426).
303
f Automatic Sensor Cleaning
In step 2, select [Auto cleaningf] and set it to [Disable].
XThe sensor will no longer be cleaned when you set the power switch
to <1> or <2>.
Disabling Automatic Sensor Cleaning
304
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust
that may be visible on captured images. However, for the case where
visible dust still remains, you can append the Dust Delete Data to the
image for erasing the dust spots later. The Dust Delete Data is used by
Digital Photo Professional (EOS software, p.444) to erase the dust
spots automatically.
Prepare a solid white object such as a sheet of paper.
Set the lens focal length to 50 mm or longer.
Set the lens’s focus mode switch to <MF> and set the focus to
infinity (u). If the lens has no distance scale, rotate the camera to
face toward you and turn the focusing ring clockwise all the way.
1Select [Dust Delete Data].
Under the [z4] tab, select [Dust
Delete Data], then press <0>.
2Select [OK].
When you select [OK] and press
<0>, the automatic sensor
cleaning will be performed, then a
message will appear. Although there
will be a mechanical sound of the
shutter during the cleaning, no picture
is taken.
3 Appending Dust Delete DataN
Preparation
Obtaining the Dust Delete Data
305
3 Appending Dust Delete DataN
3Shoot a solid-white object.
At a distance of 20 cm - 30 cm
(0.7 ft. - 1.0 ft.), fill the viewfinder with
a patternless, solid-white object and
take a picture.
X
The picture will be taken in aperture-
priority AE mode at an aperture of f/22.
Since the image will not be saved, the
data can still be obtained even if there
is no card in the camera.
XWhen the picture is taken, the camera
will start collecting the Dust Delete
Data. When the Dust Delete Data is
obtained, a message will appear.
Select [OK] and the menu will
reappear.
If the data is not obtained
successfully, an error message will
appear. Follow the “Preparation”
procedure on the preceding page,
then select [OK]. Take the picture
again.
After the Dust Delete Data is obtained, it is appended to all the JPEG
and RAW images captured thereafter. Before an important shoot, it is
recommended that you update the Dust Delete Data by obtaining it
again.
For details about using Digital Photo Professional (EOS software) to
erase dust spots automatically, refer to the Digital Photo Professional
Instruction Manual.
The Dust Delete Data appended to the image is so small that it hardly
affects the image file size.
Dust Delete Data
Be sure to use a solid-white object such as a new sheet of white paper. If the
object has any pattern or design, it may be recognized as dust data and
affect the accuracy of the dust deletion with EOS software.
306
Dust that could not be removed by the automatic sensor cleaning can
be removed manually with a commercially-available blower, etc. Before
cleaning the sensor, detach the lens from the camera.
The image sensor is extremely delicate. If the sensor needs to be
cleaned directly, having it done by a Canon Service Center is
recommended.
1Select [Sensor cleaning].
Under the [53] tab, select [Sensor
cleaning], then press <0>.
2Select [Clean manually].
Select [Clean manually], then press
<0>.
3Select [OK].
Select [OK], then press <0>.
XIn a moment, the reflex mirror will lock
up and the shutter will open.
4Clean the sensor.
5End the cleaning.
Set the power switch to <2>.
3 Manual Sensor CleaningN
If you use a battery, make sure it is fully charged.
Using the household power outlet accessories (sold separately, p.381) is
recommended.
307
3 Manual Sensor CleaningN
When Multi Shot Noise Reduction is set, [Clean manually] cannot be
selected.
While cleaning the sensor, never do any of the following. If the
power is cut off, the shutter will close and the shutter curtains and
image sensor may get damaged.
•Setting the power switch to <2>.
• Removing or inserting the battery.
The surface of the image sensor is extremely delicate. Clean the sensor
with care.
Use a plain blower without any brush attached. A brush can scratch the
sensor.
Do not insert the blower tip inside the camera beyond the lens mount. If
the power is turned off, the shutter will close and the shutter curtains or
reflex mirror may get damaged.
Never use pressurized air or gas to clean the sensor. Pressurized air
may damage the sensor, and sprayed gas may freeze on the sensor and
scratch it.
If the battery level becomes low while cleaning the sensor, the beeper
will sound as a warning. Stop cleaning the sensor.
If a smudge that cannot be removed with a blower remains, having the
sensor cleaned by a Canon Service Center is recommended.
308
309
10
Image Playback
This chapter describes advanced usage of the playback
methods described in Chapter 2 “Basic Shooting and
Image Playback”, how to play back and erase the
captured images (still photos/movies), how to view them
on a TV screen, and other playback-related functions.
Images shot and saved with another device
The camera may not be able to properly display images captured
with a different camera, edited with a computer, or that have had their
file names changed.
310
Search for images quickly with the index display showing 4, 9, 36, or
100 images on one screen.
1Play back the image.
When you press the <x> button,
the last image captured will be
displayed.
2Switch to the index display.
Press the <I> button.
XThe 4-image index display will
appear. The selected image is
highlighted with an orange frame.
Pressing the <I> button will
switch the display as follows: 9
images 9 36 images 9 100 images.
Pressing the <u> button will switch
the display as follows: 100 images 9
36 images 9 9 images 9 4 images
9 1 image.
3Select an image.
Press the <V> cross keys to move
the orange frame to select the image.
Turning the <6> dial will display
image(s) on the next or previous
screen.
Press <0> in the index display to
display the selected image in the
single-image display.
x Searching for Images Quickly
H
Display Multiple Images on One Screen (Index Display)
ÎÎ ÎÎ
311
x Searching for Images Quickly
In the single-image display, you can turn the <6> dial to jump through
the images forward or backward according to the jump method set.
1Select [Image jump w/6].
Under the [x2] tab, select [Image
jump w/6], then press <0>.
2Select the jump method.
Press the <V> cross keys to select
the jump method, then press <0>.
d:Display images one by one
e:Jump 10 images
r:Jump images by the specified
number
g:Display by date
h:Display by folder
i:Display movies only
j:Display stills only
s:Display protected images only
k:Display by image rating (p.317)
Turn the <6> dial to select.
I Jumping through Images (Jump Display)
With [Jump images by the specified number], you can turn the <6>
dial to select the number of images you want to jump (1 to 100).
To search images by shooting date, select [Date].
To search images by folder, select [Folder].
If the card contains both movies and still photos, select [Movies] or
[Stills] to display one or the other.
If no images match the selected [Rating], you cannot browse through the
images with the <6> dial.
x Searching for Images Quickly
312
3Browse by jumping.
Press the <x> button to play back
images.
In the single-image display, turn the
<6> dial.
XYou can browse by the set method.
Playback position
Jump method
313
You can magnify a captured image by approx. 1.5x to 10x on the LCD
monitor.
1Magnify the image.
Press the <u> button during image
playback.
XThe image will be magnified.
If you hold down the <u> button, the
image will be magnified until it
reaches the maximum magnification.
Press the <I> button to reduce
the magnification. If you hold down
the button, the magnification will be
reduced to the single-image display.
2Scroll around the image.
Press the <V> cross keys to scroll
the magnified image in the direction
pressed.
To exit magnified view, press the
<x> button and the single-image
display will reappear.
u/y Magnifying Images
Magnified area position
Turn the <6> dial to view another image while maintaining the
magnified view.
A movie cannot be magnified.
314
The LCD monitor is a touch-sensitive panel that you can touch with your
fingers for various playback operations. First, press the <x> button
to play back images.
Swipe with one finger.
With single-image display, touch the
LCD monitor with one finger. You
can browse to the next or previous
image by swiping your finger to the
left or right.
Swipe to the left to see the next
(newer) image, or swipe to the right to
see the previous (older) image.
With index display, also touch the
LCD monitor with one finger. You
can browse to the next or previous
screen by swiping your finger up or
down.
Swipe up to see the next (newer)
images or swipe down to see the
previous (older) images.
When you select an image, the
orange frame will appear. Tap on the
image again to display it as a single
image.
Swipe with two fingers.
Touch the LCD monitor with two fingers.
When you swipe two fingers to the left or
right, you can jump through images with
the method set in [Image jump w/6]
under the [x2] tab.
d Playing Back with the Touch Screen
Browsing Images
Jumping through Images (Jump Display)
Touch operations on the camera’s LCD monitor are also possible while
playing back images on a TV set connected to your camera (p.333).
315
d Playing Back with the Touch Screen
Pinch two fingers.
Touch the screen with two fingers spread
apart, and pinch your fingers together on
the screen.
Each time you pinch your fingers, the
single-image display will change to
the index display.
When you select an image, the orange
frame will appear. Tap on the image
again to display it as a single image.
Spread two fingers apart.
Touch the screen with two fingers
together, then spread your fingers apart
on the screen.
As you spread your fingers, the
image will be magnified.
The image can be magnified up to
approx. 10x.
Double-tap.
When you double-tap on the image
with your finger, the recorded image’s
pixels will be displayed at approx.
100% centered around the point that
you tapped on.
To return to the single-image display,
double-tap on the image again.
Reducing Image (Index Display)
Magnifying Image
In the index display, you cannot magnify the image by double-tapping.
You can scroll around the image by dragging your fingers.
To reduce the image, pinch your fingers together on the screen.
By tapping on [2], you can return to the single-image display.
316
You can use this feature to rotate the displayed image to the desired
orientation.
1Select [Rotate image].
Under the [x1] tab, select [Rotate
image], then press <0>.
2Select an image.
Press the <Y> <Z> keys to select
the image to be rotated.
You can also select an image in the
index display (p.310).
3Rotate the image.
Each time you press <0>, the
image will rotate clockwise as follows:
90° 9 270° 9 0°.
To rotate another image, repeat steps
2 and 3.
To exit and return to the menu, press
the <M> button.
b Rotating the Image
If you set [51: Auto rotate] to [OnzD] (p.297) before taking vertical
shots, you need not rotate the image as described above.
If the rotated image is not displayed in the rotated orientation during
image playback, set [51: Auto rotate] to [OnzD].
A movie cannot be rotated.
317
You can rate images (still photos and movies) with one of the five rating
marks: l/m/n/o/p. This function is called rating.
1Select [Rating].
Under the [x2] tab, select [Rating],
then press <0>.
2Select [Select images].
XAn image is displayed.
3Select the image to be rated.
Press the <Y> <Z> keys to select
an image to be rated, then press
<0>.
By pressing the <I> button, you
can select images from a three-image
display. To return to the single-image
display, press the <u> button.
4Rate the image.
Press the <W> <X> keys to select a
rating.
XWhen you append a rating mark for
the image, the number beside the set
rating will increase by one.
To rate another image, repeat steps 3
and 4.
3 Setting Ratings
Rating a Single Image
3 Setting Ratings
318
You can specify the range of images to rate all the images in the range at
once.
1Select [Select range].
Select [Select range] in [x2:
Rating], then press <0>.
2Specify the range of images.
Select the first image (start point),
then press <0>.
Select the last image (end point),
then press <0>.
XThe [X] icon will appear on the
selected images.
To cancel the selection, repeat this
step.
To return to the previous screen,
press the <M> button.
3Confirm the range.
Press the <g> button.
4Rate the image.
Turn the <6> dial to select a rating
mark, then select [OK].
Specifying the Range
319
3 Setting Ratings
You can rate all the images in a folder or on a card at once.
When you select [All images in folder]
or [All images on card] in [x2:
Rating], all the images in the folder or on
the card will be specified.
Turn the <6> dial to select a rating
mark, then select [OK].
To cancel the rating, select the [OFF]
rating mark.
Specifying All Images in a Folder or on a Card
A total of up to 999 images of a given rating can be displayed. If there are
1000 or more images with a given rating, [###] will be displayed.
Taking Advantage of Ratings
With [x2: Image jump w/6], you can display only the images having
a specific rating.
Depending on the computer’s operating system, you can see each file’s
rating as part of the file information display or in the provided, standard
image viewer (JPEG images only).
320
You can search for images by specifying the conditions and display the
filtered images. You can also play back in a slide show, protect, or erase
all the found images at once.
1Select [Set image search
conditions].
Under the [x2] tab, select [Set
image search conditions], then
press <0>.
2Set the search conditions.
Press the <W> <X> keys to select
the condition.
Press the <Y> <Z> keys to set the
setting.
To cancel the condition, press the
<B> button.
You can even set all the conditions.
To cancel all the conditions, press the
<L> button.
3 Filtering Images for Playback
Item Setting
MRating Images with the selected rating mark will be displayed.
dDate Images taken on the selected shooting date will be
displayed.
nFolder Images in the selected folder will be displayed.
JProtect “Protected” or “Unprotected” images on the card will be
displayed.
fType of file
Image files of the selected type will be displayed.
The settable file types are [z Stills], [z (RAW)],
[z(RAW, RAW+JPEG)], [z (RAW+JPEG)],
[z(RAW+JPEG, JPEG)], [z (JPEG)], and [k Movies].
321
3 Filtering Images for Playback
3Implement the search conditions.
Press <0>.
XRead the message that appears and
select [OK].
4Display the found images.
Press the <x> button to play back
images.
XImages that match the set conditions
will appear in a yellow frame.
If there are no images matching the search conditions, pressing <0> on
the screen in step 2 will not enable [OK]. (Cannot proceed to step 3.)
Even if [52: Auto power off] is set to [4 min.] or less, the auto power off
time will be approx. 6 min. when the search conditions screen is
displayed.
With the found images displayed, you can also perform operations
(protect, erase, print order, photobook set-up, rating, and slide show) for
all the found images at once.
The display of found images will be automatically canceled with the
following operations:
• Shooting is performed.
• Auto power off takes effect.
• Setting the power switch to <2>.
• Formatting the SD card.
• Adding an image (such as when a captured image is saved as a new
image after applying a filter effect, resizing, or cropping).
• When there are no longer any images matching the search conditions.
322
During playback, you can press the <Q> button to set the following:
[J: Protect images], [b: Rotate image], [9: Rating], [U: Creative
filters], [S: Resize (JPEG images only)], [N: Cropping], [T: AF point
display], [e: Image jump w/6], [t: Image search], and [q: Send
images to smartphone*].
For movies, only the functions in bold above can be set.
* Not selectable if [Disable] is set for [Wi-Fi] under [51: Wireless
communication settings].
1Press the <Q> button.
During image playback, press the
<Q> button.
XThe Quick Control options will
appear.
2Select an item and set it.
Press the <W> <X> keys to select a
function.
XThe name and setting of the selected
function are displayed at the bottom
of the screen.
Press the <Y> <Z> keys to set the
function.
For Protect images (p.336) and
Rating (p.317), press <B> to
select multiple images.
For Creative filters (p.356), Resize
(p.359), Cropping (p.361), Image
search (p.320), and Send images to
smartphone, press <0> and set
the function.
Image jump w/6: To specify the
number of images for Jump display or
Rating (p.317), press <B>.
To cancel, press the <M> button.
Q Quick Control for Playback
323
Q Quick Control for Playback
3Exit the setting.
Press <0> to exit Quick Control.
To rotate an image, set [51: Auto rotate] to [OnzD]. If [51: Auto rotate]
is set to [OnD] or [Off], the [b Rotate image] setting will be recorded to
the image, but the camera will not rotate the image for display.
For images taken with another camera, the options you can select may be
restricted.
324
The three main ways to play back and enjoy movies are as follows:
By connecting the camera to a TV set
with an HDMI cable, you can play back
the captured movies and still photos on
the TV set.
You can play back movies on the
camera’s LCD monitor. You can also edit
out the movie’s first and last scenes and
can play back the still photos or movies
on the card in an automatic slide show.
k Enjoying Movies
Playback on a TV Set (p.333)
Playback on the Camera’s LCD Monitor (p.326-332)
Since hard disk recorders do not have an HDMI IN terminal, the camera
cannot be connected to a hard disk recorder with an HDMI cable.
Even if the camera is connected to a hard disk recorder with a USB
cable, movies and still photos cannot be played back or saved.
Movies cannot be played back on devices that do not support MOV-
format or MP4-format movie files.
A movie edited with a computer cannot be rewritten to the card and played
back with the camera.
325
k Enjoying Movies
The movie files recorded on the card can
be transferred to a computer and played
back or edited with pre-installed or
general-purpose software compatible
with the movie’s recording format.
Playback and Editing with a Computer
To play back or edit a movie with commercially-available software, use
software compatible with MOV-format and MP4-format movies. For details
on commercially-available software, contact the software manufacturer.
326
1Play back the image.
Press the <x> button to display an
image.
2Select a movie.
Press the <Y> <Z> keys to select
the movie to be played back.
In the single-image display, the
<O1> icon displayed on the upper
left indicates a movie. If the movie is a
video snapshot, <Ot> will be
displayed.
In the index display, perforations at
the left edge of a thumbnail indicate a
movie. As movies cannot be played
back from the index display, press
<0> to switch to the single-
image display.
3In the single-image display, press
the <g> button.
XThe movie playback panel will appear
at the bottom of the screen.
4Play back the movie.
Select [7] (Play), then press <0>.
XThe movie will start playing back.
You can pause the playback by
pressing <0>.
You can adjust the sound volume
during movie playback by turning the
<6> dial.
For more details on the playback
operations, see the next page.
k Playing Back Movies
Speaker
The camera may not be able to play back movies shot with another camera.
327
k Playing Back Movies
Movie Playback Panel
* When background music is set, the movie sound will not be played back.
Item Playback Operations
7 Play Pressing <0> toggles between playback and stop.
8 Slow motion
Adjust the slow motion speed by pressing the <Y> <Z>
keys. The slow motion speed is indicated on the upper
right of the screen.
5 First frame Displays the movie’s first frame.
3 Previous frame Displays the previous frame each time you press <0>.
Holding <0> down will rewind the movie.
6 Next frame Plays the movie frame-by-frame each time you press
<0>. Holding <0> down will fast forward the movie.
4 Last frame Displays the movie’s last frame.
v Background
music*
Plays back a movie with the selected background music
(p.332).
X Edit Displays the editing screen (p.328).
Playback position
mm’ ss” Playback time (minutes:seconds)
9 Volume Turn the <6> dial to adjust the volume of the built-in
speaker (p.326).
32Press the <M> button to return to the single-image
display.
With a fully-charged Battery Pack LP-E17, the continuous playback time
at room temperature (23°C/73°F) will be approx. 3 hr.
If you connect the camera to a TV set to play a movie (p.333), adjust the
sound volume with the TV set. (Turning the <6> dial will not change
the sound volume.)
X Editing a Movie’s First and Last Scenes
328
Tap [7] at the center of the
screen.
XThe movie will start playing back.
To display the movie playback panel,
tap <O1> on the upper left of the
screen.
To pause the movie while it is playing
back, tap on the screen. The movie
playback panel will also appear.
Playback with the Touch Screen
X Editing a Movie’s First and Last Scenes
You can edit out the first and last scenes of a movie in approx. 1-sec.
increments.
1On the movie playback screen,
select [X].
XThe movie editing panel will be
displayed at the bottom of the screen.
2Specify the part to be edited out.
Select either [U] (Cut beginning) or
[V] (Cut end), then press <0>.
Press the <Y> <Z> keys to see the
previous or next frames. Keep
holding down the key to fast forward
or fast rewind the frames.
After deciding which part to edit out,
press <0>. The portion highlighted
in white on the top is what will remain.
329
X Editing a Movie’s First and Last Scenes
3Check the edited movie.
Select [7] and press <0> to play
back the edited movie.
To change the edited part, go back to
step 2.
To cancel the editing, press the
<M> button, then select [OK] on
the confirmation dialog.
4Save the edited movie.
Select [W], then press <0>.
XThe save screen will appear.
To save it as a new movie, select
[New file]. To save it and overwrite
the original movie file, select
[Overwrite], then press <0>.
On the confirmation dialog, select
[OK], then press <0> to save the
edited movie and return to the movie
playback screen.
Since the editing is performed in approx. 1-sec. increments (position
indicated by [Z] on the top of the screen), the actual position where the
movie is edited may differ from the position you specified.
If the card does not have enough free space, [New file] will not be
available.
When the battery level is low, movie editing is not possible. Use a fully-
charged battery.
Movies shot with another camera cannot be edited with this camera.
330
You can automatically play back all the images on the card one after
another.
1Select [Slide show].
Under the [x2] tab, select [Slide
show], then press <0>.
2Configure [Set up] as desired.
Press the <W> <X> keys to select
[Set up], then press <0>.
Set the [Display time], [Repeat]
(repeated playback), [Transition
effect] (effect when changing
images), and [Background music]
for the still photos.
See page 332 for the background
music selection procedure.
After completing the settings, press
the <M> button.
3 Slide Show (Auto Playback)
Number of images
to be played back
[Display time][Repeat]
[Transition effect][Background music]
331
3 Slide Show (Auto Playback)
3Start the slide show.
Press the <W> <X> keys to select
[Start], then press <0>.
XAfter [Loading image...] is displayed,
the slide show will start.
4Exit the slide show.
To exit the slide show and return to
the setting screen, press the
<M> button.
To pause the slide show, press <0>. During pause, [G] will be
displayed on the upper left of the image. Press <0> again to resume
the slide show. You can also pause the slide show by tapping on the
screen.
During auto playback, you can press the <B> button to switch the
still photo display format (p.110).
During movie playback, you can adjust the sound volume by turning the
<6> dial.
During auto playback or pause, you can press the <Y> <Z> keys to
view another image.
During auto playback, auto power off will not take effect.
The display time may differ depending on the image.
To view the slide show on a TV set, see page 333.
While viewing images in filtered playback with [x2: Set image search
conditions], you can play them back in a slide show.
3 Slide Show (Auto Playback)
332
After you use EOS Utility (EOS software) to copy background music to
the card, you can play background music together with the slide show.
1Select [Background music].
Set [Background music] to [On],
then press <0>.
If the card has no background music,
you cannot perform step 2.
2Select the background music.
Press the <W> <X> keys to select
the desired background music, then
press <0>. You can also select
multiple background music tracks.
3Play the background music.
To listen to a sample of the
background music, press the <B>
button.
Press the <W> <X> keys to play
another background music track. To
stop listening to the background
music, press the <B> button
again.
Adjust the sound volume by turning
the <6> dial.
To delete a background music track,
press the <W> <X> keys and select
the track, then press the <L> button.
Selecting the Background Music
At the time of purchase, the camera does not have background music. For
the procedure to copy background music to a card, refer to the EOS Utility
Instruction Manual.
333
By connecting the camera to a TV set with an HDMI cable, you can play
back the captured still photos and movies on the TV set. For the HDMI
cable, HDMI Cable HTC-100 (sold separately) is recommended.
If the picture does not appear on the TV screen, check if the [53: Video
system] is correctly set to [For NTSC] or [For PAL] (depending on the
video system of your TV set).
1Connect the HDMI cable to the
camera.
With the plug’s <dHDMI MINI> logo
facing the front of the camera, insert it
into the <D> terminal.
2Connect the HDMI cable to the TV
set.
Connect the HDMI cable to the TV
set’s HDMI IN port.
3Turn on the TV set and switch the
TV set’s video input to select the
connected port.
4Set the camera’s power switch to
<1>.
5Press the <x> button.
XThe image will appear on the TV
screen. (Nothing will be displayed on
the camera’s LCD monitor.)
The images will automatically be
displayed at the optimum resolution
matching the connected TV set.
By pressing the <B> button, you
can change the display format.
To play back movies, see page 326.
Viewing Images on a TV Set
Viewing Images on a TV Set
334
If the TV set connected to the camera with an HDMI cable is compatible
with HDMI CEC*, you can use the TV set’s remote control for playback
operations.
* An HDMI-standard function enabling HDMI devices to control each other so that
you can control them with one remote control unit.
1 Select [Ctrl over HDMI].
Under the [33] tab, select [Ctrl over
HDMI], then press <0>.
2Select [Enable].
3Connect the camera to a TV set.
Use an HDMI cable to connect the
camera to the TV set.
X
The TV set’s input will switch
automatically to the HDMI port
connected to the camera. If it does not
switch automatically, use the TV set’s
remote control to select the HDMI IN
port the cable is connected to.
4Press the camera’s <x> button.
XAn image will appear on the TV
screen and you can use the TV set’s
remote control to play back images.
3 Using HDMI CEC TV Sets
Adjust movie sound volume with the TV set. The sound volume cannot
be adjusted with the camera.
Before connecting or disconnecting the cable between the camera and
TV set, turn off the camera and TV set.
Depending on the TV set, part of the image displayed may be cut off.
Do not connect any other device’s output to the camera’s <D>
terminal. Doing so may cause a malfunction.
Certain TV sets may not display the images due to incompatibility.
335
Viewing Images on a TV Set
5Select an image.
Point the remote control toward the
TV set and press the / button to
select an image.
6Press the remote control’s Enter
button.
XThe menu appears and you can
perform the playback operations
shown on the left.
Press the remote control’s /
button to select the desired option,
then press the Enter button.
If you select [Return] and press the
Enter button, the menu will disappear
and you can use the / button to
select an image.
Still photo playback
menu
Movie playback menu
2: Return
a: 9-image index
1: Play movie
y: Slide show
B: Display shooting info
b: Rotate
Certain TV sets require you to first enable the HDMI CEC connection.
For details, refer to the TV set’s Instruction Manual.
Certain TV sets, even those compatible with HDMI CEC, may not be able
to be operated properly. In such a case, set [33: Ctrl over HDMI] to
[Disable], and use the camera to control the playback operation.
336
You can protect important images from being accidentally erased by the
camera’s erase function.
1Select [Protect images].
Under the [31] tab, select [Protect
images], then press <0>.
2Select [Select images].
XAn image is displayed.
3Select the image to be protected.
Press the <Y> <Z> keys to select
the image to be protected.
4Protect the image.
Press <0> to protect the image.
The <K> icon will appear.
To cancel the image protection, press
<0> again. The <K> icon will
disappear.
To protect another image, repeat
steps 3 and 4.
K Protecting Images
3 Protecting a Single Image
Image protection icon
337
K Protecting Images
You can specify the range of images to protect all the images in the
range at once.
1Select [Select range].
Select [Select range] in [x1:
Protect images], then press <0>.
2Specify the range of images.
Select the first image (start point),
then press <0>.
Select the last image (end point),
then press <0>.
XThe images will be protected and the
<K> icon will appear.
To cancel the selection, repeat this
step.
To return to the previous screen,
press the <M> button.
3 Specifying the Range of Images to be Protected
K Protecting Images
338
You can protect all the images in a folder or on a card at once.
When you select [All images in folder]
or [All images on card] in [31:
Protect images], all the images in the
folder or on the card will be protected.
To cancel the selection, select
[Unprotect all images in folder] or
[Unprotect all images on card].
3 Protecting All Images in a Folder or on a Card
If you format the card (p.68), the protected images will also be erased.
Movies can also be protected.
Once an image is protected, it cannot be erased by the camera’s erase
function. To erase a protected image, you must first cancel the
protection.
If you erase all the images (p.341), only the protected images will
remain. This is convenient when you want to erase all unnecessary
images at once.
339
You can either select and erase unnecessary images one by one or
erase them in one batch. Protected images (p.336) will not be erased.
1Play back the image to be erased.
2Press the <L> button.
XThe Erase menu will appear.
3Erase the image.
Select [Erase], then press <0>.
The image displayed will be erased.
By adding checkmarks <X> to the images to be erased, you can erase
all those images at once.
1Select [Erase images].
Under the [31] tab, select [Erase
images], then press <0>.
L Erasing Images
Erasing a Single Image
Once an image is erased, it cannot be recovered. Make sure you no
longer need the image before erasing it. To prevent important images
from being erased accidentally, protect them. Erasing an image shot in
RAW+JPEG will erase both the RAW and JPEG images.
3 Checkmarking <X> Images to Be Erased in a Batch
L Erasing Images
340
2Select [Select and erase images].
XAn image is displayed.
3Select the images to be erased.
Press the <Y> <Z> keys to select
the image to be erased, then press
<0>.
XA checkmark <X> will be displayed
on the upper left of the screen.
By pressing the <I> button, you
can select images from a three-image
display. To return to the single-image
display, press the <u> button.
To select another image to be erased,
repeat step 3.
4Erase the images.
Press the <L> button.
Select [OK], then press <0>.
XThe selected images will be erased.
341
L Erasing Images
You can specify the range of images to erase all the images in the
range at once.
1Select [Select range].
Select [Select range] in [31: Erase
images], then press <0>.
2Specify the range of images.
Select the first image (start point),
then press <0>.
Select the last image (end point),
then press <0>.
XThe [X] icon will appear on the
selected images.
To cancel the selection, repeat this
step.
To return to the previous screen,
press the <M> button.
3Erase the images.
Press the <L> button.
Select [OK] on the confirmation
dialog, then press <0>.
XThe selected images will be erased.
You can erase all the images in a folder or on a card at once. When
[31: Erase images] is set to [All images in folder] or [All images on
card], all the images in the folder or on the card will be erased.
3 Specifying the Range of Images to be Erased
3 Erasing All Images in a Folder or on a Card
To erase all images including protected images, format the card (p.68).
342
DPOF (Digital Print Order Format) enables you to print images recorded
on the card according to your printing instructions such as the image
selection, quantity to print, etc. You can print multiple images in one
batch or create a print order for a photofinisher.
You can set the print settings such as print type, date imprinting, file
number imprinting, etc. The print settings will be applied to all the
images specified for printing. (They cannot be set individually for each
image.)
1Select [Print order].
Under the [31] tab, select [Print
order], then press <0>.
2Select [Set up].
3Set the options as desired.
Set the [Print type], [Date], and [File
No.].
Select the option to be set, then press
<0>. Select the desired setting,
then press <0>.
W Digital Print Order Format (DPOF)
3 Setting the Printing Options
You can send images to a Wi-Fi printer supporting PictBridge (Wireless
LAN) and print them. For details, refer to the Wi-Fi (Wireless
Communication) Function Instruction Manual.
343
W Digital Print Order Format (DPOF)
4Exit the setting.
Press the <M> button.
XThe print order screen will reappear.
Next, select [Sel.Image] or [Multiple] to order the images to be
printed.
Print type
KStandard Prints one image on one sheet.
LIndex Multiple thumbnail images are printed on
one sheet.
K
LBoth Prints both the standard and index prints.
Date On [On] imprints the recorded date of the captured
image.
Off
File number On [On] imprints the file number.
Off
[Print type][Date][File No.]
RAW images or movies cannot be specified for printing.
Even if [Date] and [File No.] are set to [On], the date or file number may
not be imprinted depending on the print type setting and printer model.
With [Index] prints, the [Date] and [File No.] cannot both be set to [On]
at the same time.
When printing with DPOF, use the card for which print order
specifications are set. You cannot print in the specified print order if you
extract just the images from the card for printing.
Certain DPOF-compliant printers and photofinishers may not be able to
print the images as you specified. Refer to the printer’s instruction
manual before printing, or check with your photofinisher about
compatibility when ordering prints.
While installing images into this camera, do not specify a new print order
for images that had a print order set by a different camera. All the print
orders may be overwritten inadvertently. Also, the print order may not be
possible, depending on the image type.
W Digital Print Order Format (DPOF)
344
Selecting Images
Select and specify the images one by
one.
By pressing the <I> button, you can
select images from a three-image
display. To return to the single-image
display, press the <u> button.
Press the <M> button to save the
print order to the card.
[Standard] [Both]
Press the <W> <X> keys to set the
number of copies to be printed for the
displayed image.
[Index]
Press <0> to add a checkmark to the
box [X]. The image will be included in
the index print.
3 Specifying Images for Printing
Quantity
Total images selected
Index icon
Checkmark
345
W Digital Print Order Format (DPOF)
Selecting Multiple Images
• Select Range
1Select [Select range].
Select [Select range] in [Multiple],
then press <0>.
2Specify the range of images.
Select the first image (start point),
then press <0>.
Select the last image (end point),
then press <0>.
XThe [X] icon will appear on the
selected images.
One copy of all the specified images
will be set for printing.
To cancel the selection, repeat this
step.
To return to the previous screen,
press the <M> button.
• All Images in a Folder
Select [Mark all in folder] and select the folder. A print order for
one copy of all the images in the folder will be specified. If you
select [Clear all in folder] and select the folder, the print order for
all the images in the folder will be canceled.
• All Images on a Card
If you select [Mark all on card], one copy of all the images on the
card will be specified for printing. If you select [Clear all on card],
the print order will be cleared for all the images on the card.
Note that RAW images or movies will not be specified for printing even if
you specify all images at once with [Multiple].
When using a PictBridge-compatible printer, do not specify more than
400 images for one print order. If you specify more than this, the images
may not all be printed.
346
You can specify up to 998 images to be printed in a photobook. When
you use EOS Utility (EOS software) to transfer images to a computer,
the specified images for the photobook will be copied to a dedicated
folder. This function is useful for ordering photobooks online.
1Select [Photobook Set-up].
Under the [x1] tab, select
[Photobook Set-up], then press
<0>.
2Select [Select images].
XAn image is displayed.
3Select the image to be specified.
Press the <Y> <Z> keys to select
the image to be specified, then press
<0>.
Repeat this step to select another
image. The number of images that
have been specified will be displayed
on the upper left of the screen.
To display the three-image display,
press the <I> button. To return to
the single-image display, press the
<u> button.
To cancel the image specification,
press <0> again.
p Specifying Images for a Photobook
3 Specifying One Image at a Time
347
p Specifying Images for a Photobook
You can specify the range of images to select all the images in the
range at once for the photobook.
1Select [Select range].
In [Multiple] under [x1: Photobook
Set-up], select [Select range], then
press <0>.
2Specify the range of images.
Select the first image (start point),
then press <0>.
Select the last image (end point),
then press <0>.
XThe [X] icon will appear on the
selected images.
To cancel the selection, repeat this
step.
To return to the previous screen,
press the <M> button.
3 Specifying the Range
p Specifying Images for a Photobook
348
You can also specify all the images in a folder or on a card at once for
the photobook.
When [Multiple] under [x1:
Photobook Set-up] is set to [All images
in folder] or [All images on card], all
the images in the folder or on the card
will be specified for the photobook.
To clear your selections, select [Clear all
in folder] or [Clear all on card].
3 Specifying All Images in a Folder or on a Card
RAW images or movies cannot be specified.
Do not specify images already specified for a photobook in another
camera for another photobook with this camera. All the photobook
settings may be overwritten inadvertently.
349
The information displayed varies depending on the shooting mode and
settings.
Basic information display
AF Point Display
When [33: AF point disp.] is set to [Enable], the AF point that
achieved focus will be displayed in red. If automatic AF point
selection is set, multiple AF points may be displayed at the same
time.
B: Shooting Information Display
Still Photo Example
Folder number -
File numbering
Rating
Wi-Fi signal strength/
Eye-Fi transmission status
Playback number/
Total images
recorded
Protect images
Eye-Fi transfer completed
Battery level
Image-recording
quality
Highlight tone priority
ISO speed
Exposure compensation
amount
Wi-Fi function
Shutter speed
Aperture
Bluetooth function
If the image was taken by another camera, certain shooting information
may not be displayed.
It may not be possible to play back images taken with this camera on
other cameras.
B: Shooting Information Display
350
Shooting information display
•Detailed information
* When you shoot in the 1+73 image-recording quality, the 1 file size will
be displayed.
* During flash photography without flash exposure compensation, <0> will be
displayed.
*<M> will be displayed for images shot with Multi Shot Noise Reduction.
*<u> will be displayed for images shot with the Creative filter function and for
images edited (resized or Creative filter applied) and then saved.
*<u> and <N> will be displayed for images cropped and then saved.
Exposure compensation amount
Shutter speed
Shooting mode
ISO speed
Shooting date and time
Image-recording quality
Histogram (Brightness/RGB)
White balance
White balance correction
Highlight tone priority
Metering mode
File size
Flash exposure compensation
amount / Multi Shot Noise
Reduction
Picture Style/Settings
Auto Lighting
Optimizer
Scroll bar
Aperture
351
B: Shooting Information Display
•Lens / Histogram information
Histogram display
(Brightness)
Lens name
Focal length
Histogram display
(RGB)
•White balance information •Picture Style information 1
•Color space / Noise
reduction information
•Lens aberration correction
information
•Picture Style information 2
If you used GPS Receiver GP-E2 or smartphone to record GPS information
for the image, the “GPS information” screen will also appear.
B: Shooting Information Display
352
* If manual exposure is used, the shutter speed, aperture, and ISO speed (when
set manually) will be displayed.
*The <
t> icon will be displayed for video snapshots.
Movie Example
Movie shooting mode/
Time-lapse movie
Movie file size
Shutter speed
Compression method
Movie recording size Shooting time, Playback time
Playback
Aperture
Frame rate
Recording format
Creative filters
During movie playback, “*, *” will be displayed for [Fineness] and
[Threshold] of [Picture Style]’s [Sharpness].
353
B: Shooting Information Display
Highlight Alert
When the shooting information is displayed, overexposed and
clipped highlights will blink. To obtain a better result for the blinking
areas where you want the gradation to be faithfully reproduced, set
the exposure compensation to a negative amount and shoot again.
Histogram
The brightness histogram shows the exposure level distribution and
overall brightness. The RGB histogram is for checking the color
saturation and gradation. The display can be switched with [x3:
Histogram disp].
[Brightness] Display
This histogram is a graph showing the distribution
of the image’s brightness level. The horizontal
axis indicates the brightness level (darker on the
left and brighter on the right), while the vertical
axis indicates how many pixels exist for each
brightness level. The more pixels there are
toward the left, the darker the image. The more
pixels there are toward the right, the brighter the
image. If there are too many pixels on the left, the
shadow detail will be lost. If there are too many
pixels on the right, the highlight detail will be lost.
The gradation in-between will be reproduced. By
checking the image and its brightness histogram,
you can see the exposure level inclination and the overall gradation.
[RGB] Display
This histogram is a graph showing the distribution of each primary
color’s brightness level in the image (RGB or red, green, and blue).
The horizontal axis indicates the color’s brightness level (darker on
the left and brighter on the right), while the vertical axis indicates how
many pixels exist for each color brightness level. The more pixels
there are toward the left, the darker and less prominent the color. The
more pixels there are toward the right, the brighter and denser the
color. If there are too many pixels on the left, the respective color
information will be lacking. If there are too many pixels on the right,
the color will be too saturated with no gradation. By checking the
image’s RGB histogram, you can see the color’s saturation and
gradation condition, as well as white balance inclination.
Sample Histograms
Dark image
Normal brightness
Bright image
354
355
11
Post-Processing
Images
After taking a picture, you can apply a filter effect, resize
the JPEG image (reduce the pixel count), or crop the
JPEG image.
The camera may not be able to process images taken with
another camera.
Post-processing of images as described in this chapter cannot
be performed when the camera is connected to a computer
with an interface cable.
356
You can apply the following Creative filters to an image and save it as a
new image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect,
Water painting effect, Toy camera effect, and Miniature effect.
1Select [Creative filters].
Under the [x1] tab, select [Creative
filters], then press <0>.
XAn image will be displayed.
2Select an image.
Select the image you want to apply a
filter to.
By pressing the <I> button, you
can switch to the index display and
select an image.
3Select a filter effect.
When you press <0>, the types of
Creative filters will be displayed
(p.357).
Select a filter, then press <0>.
XThe image will be displayed with the
effects of the filter applied.
4Adjust the filter effect.
Adjust the filter effect, then press
<0>.
For the Miniature effect, press the
<W> <X> keys to move the white
frame to where you want the image to
look sharp, then press <0>.
U Applying Creative Filter Effects
357
U Applying Creative Filter Effects
5Save the image.
Select [OK] to save the image.
Check the destination folder and
image file number, then select [OK].
To apply a filter to another image,
repeat steps 2 to 5.
G Grainy B/W
Creates a grainy black-and-white photo. You can change the black-
and-white effect by adjusting the contrast.
W Soft focus
Gives the image a soft look. You can change the degree of softness
by adjusting the blur.
X Fish-eye effect
Gives the effect of a fish-eye lens. The image will have a barrel-type
distortion.
Depending on the level of this filter effect, the area trimmed along
the periphery of the image changes. Also, since this filter effect will
magnify the image center, the apparent resolution at the center may
degrade depending on the number of recorded pixels. Set the filter
effect in step 4 while checking the resulting image.
Creative Filter Characteristics
When shooting 1+73 or 1 image, the Creative filter will be applied
to the 1 image and the image will be saved as a JPEG image.
If an aspect ratio was set for a 1 image and the filter effect is applied
to it, the image will be saved in the aspect ratio that is set.
Dust Delete Data (p.304) will not be appended to images with Fish-eye
effect applied.
U Applying Creative Filter Effects
358
Y Art bold effect
Makes the photo look like an oil painting and the subject look more
three-dimensional. You can adjust the contrast and saturation. Note
that subjects such as the sky or white walls may not be rendered
with a smooth gradation and may look irregular or have significant
noise.
Z Water painting effect
Makes the photo look like a watercolor painting with soft colors. You
can control the color density by adjusting the filter effect. Note that
night scenes or dark scenes may not be rendered with a smooth
gradation and may look irregular or have significant noise.
H Toy camera effect
Darkens the photo’s corners and applies a unique color tone that
makes it look as if it was shot by a toy camera. You can change the
color cast by adjusting the color tone.
c Miniature effect
Creates a diorama effect. You can change where the image looks
sharp. In step 4, if you press the <B> button (or tap on [T] on
the screen), you can switch between the white frame’s vertical and
horizontal orientations.
359
You can resize a JPEG image to make the pixel count lower and save it
as a new image. Resizing an image is possible only with JPEG 3, 4,
and a images. JPEG b and RAW images cannot be resized.
1Select [Resize].
Under the [32] tab, select [Resize],
then press <0>.
XAn image will be displayed.
2Select an image.
Select the image you want to resize.
By pressing the <I> button, you
can switch to the index display and
select an image.
3Select the desired image size.
Press <0> to display the image
sizes.
Select the desired image size, then
press <0>.
4Save the image.
Select [OK] to save the resized
image.
Check the destination folder and
image file number, then select [OK].
To resize another image, repeat steps
2 to 4.
S Resizing JPEG Images
Target sizes
S Resizing JPEG Images
360
Resize Options by Original Image Quality
The image sizes by aspect ratios are shown in the table below.
Original Image
Quality
Available Resize Settings
4a b
3kkk
4kk
ak
Image Sizes
Image
Quality
Aspect Ratio and Pixel Count (Approx.)
3:2 4:3 16:9 1:1
43984x2656
(10.6 megapixels)
3552x2664
(9.5 megapixels)
3984x2240*
(8.9 megapixels)
2656x2656
(7.1 megapixels)
a2976x1984
(5.9 megapixels)
2656x1992
(5.3 megapixels)
2976x1680*
(5.0 megapixels)
1984x1984
(3.9 megapixels)
b2400x1600
(3.8 megapixels)
2112x1600*
(3.4 megapixels)
2400x1344*
(3.2 megapixels)
1600x1600
(2.6 megapixels)
The actual aspect ratio of images in the sizes marked with an asterisk
will differ from the aspect ratio indicated.
The image may be cropped slightly depending on the resizing conditions.
361
You can crop a captured JPEG image and save it as another image.
Images shot in RAW cannot be cropped. JPEG images shot with
1+73 can be cropped.
1Select [Cropping].
Under the [x2] tab, select
[Cropping], then press <0>.
XAn image will be displayed.
2Select an image.
Select the image you want to crop.
By pressing the <I> button, you
can switch to the index display and
select an image.
3Set the cropping frame size,
aspect ratio, position, and tilt
correction.
Press <0> to display the cropping
frame.
XThe image area within the cropping
frame will be cropped.
Changing the Cropping Frame Size
Press the <u> or <I> button.
XThe cropping frame size will change. The smaller the cropping
frame, the more magnified the cropped image will look.
Changing the Cropping Frame Aspect Ratio
Turn the <6> dial.
XCropping frame aspect ratio will change to [3:2], [16:9], [4:3], or
[1:1].
XThe aspect ratio will change as you turn the <6> dial. This also
enables you to crop the image shot in horizontal orientation to look
as if it was shot in vertical orientation.
N Cropping JPEG Images
N Cropping JPEG Images
362
Moving the Cropping Frame
Press the <W> <X> or <Y> <Z> keys.
XThe cropping frame will move up, down, left, or right.
You can also touch the cropping frame and drag it to the desired
position.
Correcting the Tilt
Press the <B> button.
XCheck the tilt with the displayed grid, then turn the <6> dial to
correct the tilt. You can correct the tilt up to ±10° in 0.1° increments.
XIf you tap on [8] or [9] on the upper left of the screen, the tilt will be
corrected in 0.5° increments.
Press <0>.
4Display the cropped image in the
full view.
Press the <g> button.
XYou can see the cropped image.
To return to the original display, press
the <g> button again.
5Save the cropped image.
Press <0>, then select [OK] to
save the cropped image.
Check the destination folder and
image file number, then select [OK].
To crop another image, repeat steps 2
to 5.
The position and size of the cropping frame may change depending on
the angle set for tilt correction.
Once a cropped image is saved, it cannot be cropped again. In addition,
you cannot resize it or apply a Creative filter.
AF point display information (p.349) and Dust Delete Data (p.304) will
not be appended to the cropped images.
363
12
Customizing the
Camera
You can make fine adjustments to various camera
functions to suit your picture-taking preferences with
Custom Functions. Custom Functions can be set and
work only in Creative Zone modes.
C
r
e
a
t
i
v
e
Z
o
n
e
364
1Select [Custom Functions(C.Fn)].
Under the [54] tab, select [Custom
Functions(C.Fn)], then press
<0>.
2Select the Custom Function
number.
Press the <Y> <Z> keys to select
the Custom Function number, then
press <0>.
3Change the setting as desired.
Press the <W> <X> keys to select
the desired setting (number), then
press <0>.
Repeat steps 2 to 3 if you want to set
other Custom Functions.
At the bottom of the screen, the
current Custom Function settings are
indicated below the respective
function numbers.
4Exit the setting.
Press the <M> button.
XThe screen in step 1 will reappear.
Under [54: Clear settings], select [Clear all Custom Func. (C.Fn)] to
clear all the Custom Function settings (p.298).
3 Setting Custom FunctionsN
Custom Function number
Clearing All Custom Functions
365
3 Setting Custom FunctionsN
* When an EX-series Speedlite (sold separately) equipped with an LED light is
used.
* Setting 4 does not function during movie shooting.
* 5 is settable only for manual exposure shooting.
Custom Functions
A LV
Shooting
k Movie
Shooting
C.Fn I: Exposure
1Exposure level increments
p.366
k k
2 ISO expansion kk
3Exposure compensation auto cancel k k
C.Fn II: Image
4Highlight tone priority p.367 k k
C.Fn III: Autofocus/Drive
5AF-assist beam firing p.368 k*
6Mirror lockup p.369
C.Fn IV: Operation/Others
7Warnings z in viewfinder p.369
8Shutter/AE lock button p.370 k k
9 Assign SET button p.371
k
(Except 3)
k
(4 and 5
only*)
10 LCD display when power ON
11 Retract lens on power off p.372 k k
Shaded Custom Functions do not function during Live View (LV)
shooting or movie shooting. (Settings are disabled.)
366
Custom Functions are organized into four groups based on the function
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive,
C.Fn IV: Operation/Others.
3 Custom Function Setting ItemsN
C.Fn I: Exposure
C.Fn-1 Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is
effective when you prefer to control the exposure in less fine
increments than 1/3-stop increments.
C.Fn-2 ISO expansion
0: Off
1: On
When you set the ISO speed, you can set “H” (equivalent to ISO
51200) for still photos and “H” (equivalent to ISO 25600) for
movies. Note that if [C.Fn-4: Highlight tone priority] is set to
[1:Enable], “H” cannot be selected.
C.Fn-3 Exposure compensation auto cancel
0: Enable
When you set the power switch to <2>, the exposure
compensation setting will be canceled.
1: Disable
The exposure compensation setting will remain in effect even if
you set the power switch to <2>.
With setting 1, the exposure level will be displayed as shown below.
367
3 Custom Function Setting ItemsN
C.Fn II: Image
C.Fn-4 Highlight tone priority
0: Disable
1: Enable
Highlight details are improved. The dynamic range is expanded
from the standard 18% gray to bright highlights. The gradation
between the grays and highlights becomes smoother.
With setting 1, the Auto Lighting Optimizer (p.149) is automatically set to
[Disable] and the setting cannot be changed.
With setting 1, noise (grainy image, banding, etc.) may become slightly
more noticeable than with setting 0.
With setting 1, the settable ISO speed range will be ISO 200 - ISO 25600
(up to ISO 12800 for movies).
Also, the <A> icon will be displayed in the viewfinder and on the LCD
monitor to indicate that highlight tone priority is enabled.
3 Custom Function Setting ItemsN
368
C.Fn III: Autofocus/Drive
C.Fn-5 AF-assist beam firing
Enables or disables the built-in flash’s AF-assist beam or the EOS-
dedicated external Speedlite’s AF-assist beam.
0: Enable
The AF-assist beam will be emitted when necessary.
1: Disable
The AF-assist beam will not be emitted. This prevents the AF-
assist beam from disturbing others.
2: Enable external flash only
If an external Speedlite is attached, it will emit the AF-assist beam
when necessary. The camera’s built-in flash will not fire the AF-
assist beam.
3: IR AF assist beam only
When an external Speedlite is attached, only the infrared AF-assist
beam will be emitted. Set this when you do not want the camera to
fire the AF-assist beam as a burst of small flashes.
With an EX-series Speedlite equipped with an LED light, the LED
light will not automatically turn on as the AF-assist beam.
If an external Speedlite’s [AF-assist beam firing] Custom Function is set to
[1:Disable], this function’s setting will be overridden and the AF-assist beam
will not be emitted.
369
3 Custom Function Setting ItemsN
C.Fn-6 Mirror lockup
0: Disable
1: Enable
You can prevent the camera vibration blur due to the mechanical
vibrations (mirror shock) inside the camera during shooting with
super telephoto lenses or shooting close-ups (macro
photography). See page 179 for the mirror lockup procedure.
C.Fn IV: Operation/Others
C.Fn-7 Warnings z in viewfinder
When any of the following functions are set, the <i> icon can be
displayed on the viewfinder’s bottom left (p.33). The <i> icon will also
appear on the Quick Control screen (p.58).
Select the function for which you want the warning icon to appear,
press <0> to add a checkmark [X], then select [OK].
When monochrome V is set:
If the Picture Style is set to [Monochrome] (p.136), the warning
icon will appear.
When WB is corrected:
If white balance correction is set (p.147), the warning icon will
appear.
When M is set:
If [z4: High ISO speed NR] is set to [Multi Shot Noise
Reduction] (p.150), the warning icon will appear.
When spot meter. is set:
If [z3: Metering mode] is set to [Spot metering] (p.172), the
warning icon will appear.
When [s: Shooting screen] is set to [Guided], this Custom Function
does not function. (Settings do not take effect.)
3 Custom Function Setting ItemsN
370
C.Fn-8 Shutter/AE lock button
0: AF/AE lock
1: AE lock/AF
This is convenient when you want to focus and meter separately.
Press the <A> button to autofocus, and press the shutter button
halfway to apply AE lock.
2: AF/AF lock, no AE lock
During AI Servo AF (or Servo AF for Live View shooting), you can
press the <A> button to pause the AF operation momentarily.
This prevents the AF from being thrown off by any obstacle
passing between the camera and subject. The exposure is set at
the moment the picture is taken.
3: AE/AF, no AE lock
This is useful for subjects that keep moving and stopping
repeatedly. During AI Servo AF (or Servo AF for Live View
shooting), you can press the <A> button to start or stop the AI
Servo AF operation. The exposure is set at the moment the picture
is taken. Thus, you can set your camera to always maintain the
optimum focusing and exposure and wait for the decisive moment.
During movie shooting
With setting 1 or 3, press the <A> button for One-Shot AF.
With setting 2, press the shutter button halfway for One-Shot AF.
371
3 Custom Function Setting ItemsN
C.Fn-9 Assign SET button
You can assign a frequently-used function to <0>. When the
camera is ready to shoot, pressing the <0> button will display the
respective function setting screen.
0: Quick Control screen
1: Image quality
The image quality setting screen will appear.
2: Flash exposure comp.
The flash exposure compensation setting screen will appear.
3: LCD monitor On/Off
You can turn on or off the LCD monitor.
4: Menu display
The menu screen will appear.
5: Expo comp (hold btn, turn S)
You can set the exposure compensation by turning the <6> dial
while holding down <0>. Useful when you want to set exposure
compensation in <a> manual exposure with ISO Auto set.
6: Flash function settings
The built-in flash or external flash function setting screen will appear.
7: Depth-of-field preview
The lens will stop down to the set aperture, and you can see the
range of acceptable focus (depth of field) in the viewfinder or in the
Live View image.
C.Fn-10 LCD display when power ON
0: Display on
When you turn on the power, the Quick Control screen will appear
(p.58).
1: Previous display status
When you turn on the power, the camera will start with the LCD
monitor display in the state it was in when the power was last
turned off. Therefore, if you turn off the camera when the LCD
monitor is off, nothing will be displayed when you turn on the
camera again. This helps to save battery power. The menu
operations and image playback will be available as usual.
3 Custom Function Setting ItemsN
372
C.Fn-11 Retract lens on power off
This is the setting for the lens retraction mechanism when a gear-
driven STM lens (such as EF40mm f/2.8 STM) is attached to the
camera. You can set it to retract the extended lens automatically when
the camera’s power switch is set to <2>.
0: Enable
1: Disable
With auto power off, the lens will not retract regardless of the setting.
Before detaching the lens, make sure that it is retracted.
With setting 0, this function takes effect regardless of the lens’s focus mode
switch setting (AF or MF).
373
Under My Menu tab, you can register menu items and Custom
Functions whose settings you change frequently. You can also name
the registered menu tabs, and press the <M> button to display the
My Menu tab first.
1Select [Add My Menu tab].
Under the [9] tab, select [Add My
Menu tab], then press <0>.
2Select [OK].
XThe [MY MENU1] tab is created.
You can create up to five My Menu
tabs by repeating steps 1 and 2.
1Select [Configure: MY MENU*].
Press the <Y> <Z> keys to select
[Configure: MY MENU*] (tab for
registering menu items), then press
<0>.
3 Registering My MenuN
Creating and Adding My Menu Tab
When [s: Menu display] is set to [Guided], the [9] tab will not be
displayed. Change the [Menu display] to [Standard] (p.54).
Registering Menu Items under the My Menu Tab(s)
3 Registering My MenuN
374
2Select [Select items to register].
3Register the desired items.
Select the desired item, then press
<0>.
Select [OK] on the confirmation
dialog.
You can register up to six items.
To return to the screen in step 2,
press the <M> button.
You can sort and delete items under the
menu tab, and rename or delete the
menu tab.
Sort registered items
You can change the order of the registered items in My Menu. Select
[Sort registered items] and select the item whose order you want to
change. Then press <0>. With [z] displayed, press the <W>
<X> keys to change the order, then press <0>.
Delete selected items / Delete all items on tab
You can delete any of the registered items. [Delete selected items]
deletes one item at a time, and [Delete all items on tab] deletes all
the registered items under the tab.
My Menu Tab Settings
375
3 Registering My MenuN
Delete tab
You can delete the My Menu tab currently displayed. Select [Delete
tab] to delete the [MY MENU*] tab.
Rename tab
You can rename the My Menu tab from [MY MENU*].
1Select [Rename tab].
2Enter text.
Press the <L> button to delete any
unnecessary characters.
Press the <V> cross keys or turn the
<6> dial to move the n and select
the desired character. Then press
<0> to enter it.
By selecting [E], you can
change the input mode.
You can enter up to 16 characters.
To cancel the text entry, press the
<B> button, then select [OK].
3Exit the setting.
After entering the text, press the
<M> button, then select [OK].
XThe set name is saved.
If you cannot enter text in step 2, press the <g> button and use the
character palette when the blue frame appears.
3 Registering My MenuN
376
You can delete all the created My Menu
tabs or My Menu items registered under
them.
Delete all My Menu tabs
You can delete all My Menu tabs you created. When you select
[Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY
MENU5] will be deleted and the [9] tab will revert to its default.
Delete all items
You can delete all the items registered under the [MY MENU1] to
[MY MENU5] tabs. The tab(s) will remain. When [Delete all items] is
selected, all the items registered under all the created tabs will be
deleted.
Deleting All My Menu Tabs / Deleting All Items
If you perform [Delete tab] or [Delete all My Menu tabs], tab names
renamed with [Rename tab] will also be deleted.
377
3 Registering My MenuN
You can select [Menu display] to set the
menu screen that is to appear first when
you press the <M> button.
Normal display
Displays the last displayed menu screen.
Display from My Menu tab
Displays with the [9] tab selected.
Display only My Menu tab
Only the [9] tab is displayed. (The z, 3, 5, and s tabs will not
be displayed.)
Menu Display Settings
378
379
13
Reference
This chapter provides reference information for camera
features, system accessories, etc.
Certification Logo
Select [54: Certification Logo Display] and press <0> to
display some of the logos of the camera’s certifications. Other
certification logos can be found in this Instruction Manual, on the
camera body, and on the camera’s package.
380
You can check the conditions of the battery you are using on the LCD
monitor.
Select [Battery info.].
Under the [53] tab, select [Battery
info.], then press <0>.
XThe battery information screen will
appear.
3 Checking the Battery Information
Battery model or household power source
being used.
The battery level (p.43) is displayed.
Battery’s recharge performance level is
displayed in three levels.
(Green) : Battery’s recharge
performance is fine.
(Green) : Battery’s recharge
performance is slightly
degraded.
(Red) : Purchasing a new
battery is recommended.
Battery position
Using a genuine Canon Battery Pack LP-E17 is recommended. If you use
batteries that are not genuine Canon products, the camera’s full
performance may not be attained or malfunction may result.
If a battery communication error message is displayed, follow the
instructions in the message.
381
You can power the camera with a household power outlet by using the
DC Coupler DR-E18 and AC Adapter AC-E6N (each sold separately).
1Connect the DC coupler’s plug.
Connect the DC coupler’s plug to the
AC Adapter’s socket.
2Connect the power cord.
Connect the power cord as shown in
the illustration.
After using the camera, unplug the
power plug from the power outlet.
3Insert the DC coupler.
Open the cover and insert the DC
coupler securely until it locks.
4Push in the DC cord.
Open the DC cord hole cover and
install the cord as shown in the
illustration.
Close the cover.
Using a Household Power Outlet
Do not connect or disconnect the power cord when the camera’s power
switch is set to <1>.
382
Wireless Remote Control BR-E1 (sold separately) compatible with
Bluetooth® low energy technology enables remote control shooting up
to approx. 5 meters/16.4 feet from the camera.
To use the BR-E1, you must first pair the camera and remote
controller so they recognize each other.
1Select [Wireless communication
settings].
Under the [51] tab, select [Wireless
communication settings], then
press <0>.
2Select [Bluetooth function].
3Select [Bluetooth function].
4Select [Remote].
If a message “Register a nickname to
identify the camera.” appears, press
<0> and register a nickname. For
the procedure to register a nickname,
refer to page 13 of the Wi-Fi
(Wireless Communication) Function
Instruction Manual.
Remote Control Shooting
Wireless Remote Control BR-E1 (Sold Separately)
Pairing
383
Remote Control Shooting
5Select [Pairing].
Select [Pairing], then press <0>.
Press and hold the <W> button and
<T> button simultaneously for 3 sec.
or more.
XPairing starts. After the pairing is
complete, the BR-E1 is registered to
the camera.
6Enable remote control shooting.
Set [z1: Drive mode] to [Q].
Set [z5: Remote control] to
[Enable].
Still Photo Shooting
Movie Shooting
Even when the camera’s power is turned off by its auto power off function,
the camera battery will still be consumed with the Bluetooth connection
established.
When you do not use Bluetooth function, setting it to [Disable] in step 4
is recommended. To use the remote controller again, just select
[Remote] again.
If remote control shooting is enabled, the auto power off will take effect in
approx. 2 min. even if [52: Auto power off] is set to [1 min.].
For the Bluetooth connection indicator, refer to the Wi-Fi (Wireless
Communication) Function Instruction Manual.
For operation of BR-E1, refer to the BR-E1 Instruction Manual.
Remote Control Shooting
384
To pair with another BR-E1, clear the connection information of the
remote controller currently connected. You can check the connection
status of the camera and remote controller on the [Check/clear
connection info] screen in step 4.
1Select [Wireless communication
settings].
Under the [51] tab, select [Wireless
communication settings], then
press <0>.
2Select [Bluetooth function].
3Select [Check/clear connection
info].
4Press the <B> button.
5Clear the connection information.
Select [OK], then press <0>.
XPairing with the remote controller
(registration of the remote controller)
will be cleared.
Cancelling the Paring
Bluetooth address of the remote controller
[Connecting...] is displayed when the remote
controller is not used.
385
Remote Control Shooting
The camera is compatible with the Remote Switch RS-60E3 that comes
with an approx. 60 cm/2.0 ft cord. When connected to the camera’s
remote control terminal, it can be pressed halfway and completely, just
like the shutter button.
F Remote Switch RS-60E3 (Sold Separately)
Remote control shooting is also possible during movie shooting (p.276).
Remote Control Shooting
386
When you take a picture without looking through the viewfinder, such as
when you use the self-timer, bulb exposure, or a remote switch, stray
light entering the viewfinder may cause the picture to look dark. To
prevent this, use the eyepiece cover (p.35) attached to the camera strap.
Note that attaching the eyepiece cover is not necessary in Live
View shooting or movie shooting.
1Detach the eyecup.
Push the bottom of the eyecup to
detach it.
2Attach the eyepiece cover.
Slide the eyepiece cover down into
the eyepiece groove to attach it.
After you finish shooting, detach the
eyepiece cover and attach the
eyecup by sliding it down into the
eyepiece groove.
Using the Eyepiece Cover
387
With a commercially-available Eye-Fi card already set up, you can
automatically transfer captured images to a computer or upload them to
an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. For instructions on
how to set up and use the Eye-Fi card or to troubleshoot any image
transfer problems, refer to the Eye-Fi card’s instruction manual or
contact the card manufacturer.
The camera is not guaranteed to support Eye-Fi card functions
(including wireless transfer). In case of a problem with an Eye-
Fi card, please check with the card manufacturer. Also note
that approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted.
If it is unclear whether the card has been approved for use in
your area, please check with the card manufacturer.
1Insert an Eye-Fi card (p.38).
2Select [Eye-Fi settings].
Under the [51] tab, select [Eye-Fi
settings], then press <0>.
This menu is displayed only when an
Eye-Fi card is inserted into the
camera.
3Enable Eye-Fi transmission.
Select [Eye-Fi trans.], then press
<0>.
Select [Enable], then press <0>.
If you set [Disable], there will be no
automatic transmission even with the
Eye-Fi card inserted (transmission
status icon I).
4
Display the connection information.
Select [Connection info.], then press
<0>.
H Using Eye-Fi Cards
H Using Eye-Fi Cards
388
5Check the [Access point SSID:].
Check that an access point is
displayed for [Access point SSID:].
You can also check the Eye-Fi card’s
MAC address and firmware version.
Press the <M> button to exit the
menu.
6Take the picture.
XThe picture is transferred and the
<H> icon switches from gray (not
connected) to one of the icons in the
sequence below.
For transferred images, O is
displayed in the shooting information
(p.349).
H (Gray) Not connected : No connection with access point.
H (Blinking) Connecting...: Connecting to access point.
H (
Illuminated
) Connected: Connection to access point established.
H () Transferring... :
Image transfer to access point in progress.
Transmission status icon
389
H Using Eye-Fi Cards
Cautions for Using Eye-Fi Cards
Under [Wi-Fi settings] of [51: Wireless communication settings], if
[Wi-Fi] is set to [Enable], image transfer with an Eye-Fi card will not be
possible.
If “J” is displayed, an error occurred while retrieving the card
information. Turn the camera’s power switch off and on again.
Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In
hospitals, on airplanes, and in other places where wireless transmissions
are prohibited, remove the Eye-Fi card from the camera beforehand.
If the image transfer does not function, check the Eye-Fi card and
computer settings. For details, refer to the card’s instruction manual.
Depending on the wireless LAN’s connection conditions, the image
transfer may take longer or it may be interrupted.
Because of the communication function, the Eye-Fi card may become
hot.
The camera’s battery power will be consumed faster.
During the image transfer, auto power off will not take effect.
If you insert a wireless LAN card other than an Eye-Fi card, [Eye-Fi
settings] will not appear. Also, the transmission status icon <H> will not
appear.
390
o: Set automatically k: User selectable : Not selectable/Disabled
Function Availability Table by Shooting Mode
Still Photo Shooting in Basic Zone Modes: A 7 C
Function A 7 C
Image quality settings selectable kkk
Aspect ratio
ISO speed Automatically set/Auto ooo
Manually set
Picture Style Automatically set D D D
Manual selection
Ambience-based shots k
Background blur k
Brightness
Color tone
White balance
Auto QQQ
Preset
Custom
Correction/Bracketing
Auto Lighting Optimizer ooo
Lens
aberration
correction
Peripheral illumination correction ooo
Chromatic aberration correction ooo
Distortion correction
Diffraction correction ooo
Long exposure noise reduction
High ISO speed noise reduction ooo
Color space sRGB ooo
Adobe RGB
Metering
Evaluative metering ooo
Center-weighted average metering
Metering mode selection
391
Function Availability Table by Shooting Mode
*1: Settable only with viewfinder shooting.
*2: Settable after pairing with Wireless Remote Control BR-E1 (sold separately).
Function A 7 C
AF operation
(Viewfinder shooting)
One-Shot AF
AI Servo AF
AI Focus AF ooo
AF operation (Live
View shooting)
One-Shot AF ooo
Servo AF
AF AF point selection kkk
AF-assist beam o o
Exposure
Program shift
Exposure compensation
AEB
AE lock
Depth-of-field preview
Drive
Single shooting kkk
Continuous shooting kkk
Silent single shooting*1
Silent continuous shooting*1
Self-timer/Remote control*2 kkk
Built-in flash
Automatic firing k k
Flash on (Fires at all times) k k
Flash off kok
Red-eye reduction k k
FE lock
Flash exposure compensation
External flash
Flash on (Fires at all times) o o
Flash off o
Function settings
Custom Function settings
Live View shooting kkk
Quick Control kkk
Function Availability Table by Shooting Mode
392
o: Set automatically k: User selectable : Not selectable/Disabled
*1: 1+73 or 1 cannot be selected.
Still Photo Shooting in Basic Zone Modes: 8
Function 8
2 q 3 5 C 4 P x 6 F G
Image quality settings selectable
kkkkkk k kkk
*1 k*1
Aspect ratio
ISO speed
Automatically set/
Auto oooooo o oooo
Manually set
Picture Style Automatically set DDDDDD D DDDD
Manual selection
Ambience-based shots
Background blur
Brightness kkkkkk k kkk
Color tone kk
White
balance
Auto QQQQQQQ
w
QQQQ
Preset
Custom
Correction/Bracketing
Auto Lighting Optimizer oooooo o oooo
Lens
aberration
correction
Peripheral illumination
correction
oooooo o oooo
Chromatic aberration
correction
oooooo o oooo
Distortion correction
o
Diffraction correction
oooooo o oooo
Long exposure noise reduction
High ISO speed noise reduction
oooooo o oooo
Color space sRGB oooooo o oooo
Adobe RGB
Metering
Evaluative metering
oooooo o ooo
Center-weighted
average metering o
Metering mode
selection
393
Function Availability Table by Shooting Mode
*2: Settable only with viewfinder shooting.
*3: Settable after pairing with Wireless Remote Control BR-E1 (sold separately).
Function 8
2 q 3 5 C 4 P x 6 F G
AF operation
(Viewfinder
shooting)
One-Shot AF ooo oooooo
AI Servo AF oo
AI Focus AF
AF operation
(Live View shooting)
One-Shot AF ooo oo ooo
Servo AF oo
AF AF point selection kkkkkkkokkk
AF-assist beam oo oooooo
Exposure
Program shift
Exposure compensation
AEB
AE lock
Depth-of-field preview
Drive
Single shooting kkkkkkkkkkk
Continuous shooting kkkkkkkkkkk
Silent single shooting*2
Silent continuous shooting*2
Self-timer/Remote control*3 kkkkkkkkkkk
Built-in flash
Automatic firing kk kk o
Flash on (Fires at all times) kk kkk k
Flash off kkookkko ko
Red-eye reduction kk kkk kk
FE lock*2
Flash exposure compensation
External flash
Flash on (Fires at all times) ooooooo oo
Flash off o o
Function settings
Custom Function settings
Live View shooting kkkkkkk kkk
Quick Control kkkkkkkkkkk
Function Availability Table by Shooting Mode
394
o: Set automatically k: User selectable : Not selectable/Disabled
*1: 1+73 or 1 cannot be selected.
Still Photo Shooting in Basic Zone Modes: v
Function v
G W X Z H c A B C D
Image quality settings selectable*1 kkkkkkkkkk
ISO speed Automatically set/Auto oooooooooo
Manually set
Picture Style Automatically set PPDPPPDPPP
Manual selection
Ambience-based shots
Background blur
Brightness
Color tone
White
balance
Auto QQQQQQQQQQ
Preset
Custom
Correction/Bracketing
Auto Lighting Optimizer
Lens
aberration
correction
Peripheral illumination
correction oooooooooo
Chromatic aberration
correction oooooooooo
Distortion correction
Diffraction correction oooooooooo
Long exposure noise reduction
High ISO speed noise reduction oooooooooo
Color space sRGB oooooooooo
Adobe RGB
Metering
Evaluative metering oo ooooooo
Center-weighted average metering
o
Metering mode selection
395
Function Availability Table by Shooting Mode
*2: Selectable for Live View shooting.
*3: Settable only with viewfinder shooting.
*4: Settable after pairing with Wireless Remote Control BR-E1 (sold separately).
Function v
G W X Z H c A B C D
AF operation
(Viewfinder
shooting)
One-Shot AF oooo
AI Servo AF
AI Focus AF oooooo
AF operation (Live
View shooting)
One-Shot AF oooooooooo
Servo AF
AF AF point selection kkokkk
*2 kkkk
AF-assist beam oooooooooo
Exposure
Program shift
Exposure compensation
AEB
AE lock
Depth-of-field preview
Drive
Single shooting kkkkkkkkkk
Continuous shooting kkkk
Silent single shooting*3
Silent continuous shooting
*3
Self-timer/Remote control
*4
kkkkkkkkkk
Built-in flash
Automatic firing kkkkkk
Flash on (Fires at all times)
kkkkkk
Flash off kkkkkkoooo
Red-eye reduction kkkkkk
FE lock*3
Flash exposure compensation
External
flash
Flash on (Fires at all times)
oooooo
Flash off oooo
Function settings
Custom Function settings
Live View shooting kkkkkkkkkk
Quick Control kkkkkkkkkk
Function Availability Table by Shooting Mode
396
o: Set automatically k: User selectable : Not selectable/Disabled
*1: Settable only with Live View shooting.
*2: 1+73 or 1 cannot be selected.
Still Photo Shooting in Creative Zone Modes
Function d s f a
Image quality settings selectable kkkk
Aspect ratio*1 kkkk
ISO speed Automatically set/Auto kkkk
Manually set kkkk
Picture Style Automatically set kkkk
Manual selection kkkk
Creative filters*1*2 kkkk
White balance
Auto kkkk
Preset kkkk
Custom kkkk
Correction/Bracketing kkkk
Auto Lighting Optimizer kkkk
Lens aberration
correction
Peripheral illumination correction
kkkk
Chromatic aberration correction
kkkk
Distortion correction kkkk
Diffraction correction kkkk
Long exposure noise reduction kkkk
High ISO speed noise reduction kkkk
Highlight tone priority kkkk
Color space sRGB kkkk
Adobe RGB kkkk
Metering Evaluative metering kkkk
Metering mode selection kkkk
397
Function Availability Table by Shooting Mode
*3: Settable only with ISO Auto set.
*4: With ISO Auto, you can set a fixed ISO speed.
*5: Works only with viewfinder shooting in One-Shot AF mode.
*6: Settable after pairing with Wireless Remote Control BR-E1 (sold separately).
*7: Works only with viewfinder shooting.
Function d s f a
AF operation
(Viewfinder
shooting)
One-Shot AF kkkk
AI Servo AF kkkk
AI Focus AF kkkk
AF operation (Live
View shooting)
One-Shot AF kkkk
Servo AF kkkk
AF AF point selection kkkk
AF-assist beam kkkk
Exposure
Program shift k
Exposure compensation kkk *3
AEB kkkk
AE lock kkk *4
Depth-of-field preview kkkk
Drive
Single shooting kkkk
Continuous shooting kkkk
Silent single shooting*5 kkkk
Silent continuous shooting*5 kkkk
Self-timer/Remote control*6 kkkk
Built-in flash
Automatic firing
Flash on (Fires at all times) kkkk
Flash off kkkk
Red-eye reduction kkkk
FE lock*7 kkkk
Flash exposure compensation kkkk
External flash
Flash on (Fires at all times) kkkk
Flash off kkkk
Function settings kkkk
Custom Function settings kkkk
Live View shooting kkkk
Quick Control kkkk
Function Availability Table by Shooting Mode
398
o: Set automatically k: User selectable : Not selectable/Disabled
*1: w and xL8L7 cannot be selected.
Movie Shooting
Function A 7 C8vd s f a
yukM
Select movie recording size kkkok
*1 kkkk
Digital zoom kkk kkkk
HDR movie shooting o
Creative filters kkkkk
Video snapshot kkk kkkk
Time-lapse movie kkk kkkk
ISO speed
Automatically set/Auto ooooooook
Manually set k
Picture
Style
Automatically set DDDDP kkkk
Manual selection kkkk
White
balance
Auto QQQQQ kkkk
Preset kkkk
Custom kkkk
Correction kkkk
Auto Lighting Optimizer
oooo kkkk
Lens
aberration
correction
Peripheral illumination
correction oooookkkk
Chromatic aberration
correction oooookkkk
High ISO speed noise reduction ooooooooo
Highlight tone priority kkkk
399
Function Availability Table by Shooting Mode
*2: Not settable with Miniature effect movie set.
*3: Settable only with ISO Auto set.
*4: With ISO Auto, you can set a fixed ISO speed.
Function A 7 C8vd s f a
yukM
Metering ooooooooo
AF
Face+Tracking*2 kkkkkkkkk
Smooth zone*2 kkkkkkkkk
Live 1-point AF kkkkkkkkk
Manual focusing (MF) kkkkkkkkk
Movie Servo AF*2 kkkkkkkkk
Exposure
Program shift
Exposure compensation kkk *3
AE lock kkk *4
Depth-of-field preview
Aspect ratio
Sound recording kkkkkkkkk
Quick Control kkkkkkkkk
400
System Map
Eyecup Ef
Rubber Frame Ef
Eyepiece Extender
EP-EX15II
Angle Finder C
E-series Dioptric
A
djustment Lenses
Strap
Battery Pack
LP-E17
Battery Charger
LC-E17 or LC-E17E
AC Adapter
AC-E6N*1
DC Coupler
DR-E18*1
Bundled
Accessories
Hand Strap E2
Macro Twin Lite
MT-24EX
Macro Ring Lite
MR-14EX II
ST-E2 270EX IIST-E3-RT 430EX III-RT/
430EX III
Magnifier
MG-Ef
600EX II-RT
Protecting Cloth
PC-E1/PC-E2
401
System Map
HDMI Cable
HTC-100 (2.9 m/9.5 ft.)
EF-S lenses
EF lenses
SD/SDHC/SDXC
memory card Card reader
TV/Video
Interface Cable IFC-200U/500U
(1.9 m/6.2 ft.) / (4.7 m/15.4 ft.)
Remote
Switch
RS-60E3
Card slot
USB port
Computer
Timer Remote
Controller
TC-80N3
Remote Controller Adapter RA-E3
Directional Stereo Microphone
DM-E1
*1: AC Adapter Kit ACK-E18 can also be used.
*2: The digital compass cannot be used with this camera.
(Shooting direction will not be recorded.)
* All cable lengths given are approximate figures.
Connect Station
CS100
Interface Cable
IFC-400PCU (1.3 m/4.3 ft.)
GPS Receiver
GP-E2*2
Wireless
Remote
Control
BR-E1
402
z: Shooting 1 (Red) Page
*1: Not selectable in the <8: FG> and <v> modes.
*2: Displayed after paring with Wireless Remote Control BR-E1 (sold separately).
3 Menu Settings
Viewfinder Shooting (Basic Zone Modes)
Image quality 73/83/74/84/7a/8a/b/
1+73*1/1*1128
Drive mode
Single shooting / Continuous shooting / Self-
timer: 10-sec./remote control*2 / Self-timer: 2-
sec. / Self-timer: Continuous
123
Image review time Off / 2 sec. / 4 sec. / 8 sec. / Hold 288
Release shutter
without card Enable / Disable 287
Red-eye reduction Disable / Enable 183
Live View shooting Enable / Disable 197
Although the menu tabs and options displayed under [x (Playback)],
[5 (Set-up)], and [9 (My Menu)] are basically the same for viewfinder
shooting, Live View shooting, and movie shooting, there may be slight
differences.
403
3 Menu Settings
z: Shooting 1 (Red) Page
*1: Not selectable in the <8: FG> and <v> modes.
*2: Displayed after paring with Wireless Remote Control BR-E1 (sold separately).
z: Shooting 2 (Red)
Live View Shooting (Basic Zone Modes)
Image quality 73/83/74/84/7a/8a/b/
1+73*1/1*1128
Drive mode
Single shooting / Continuous shooting / Self-
timer: 10-sec./remote control*2 / Self-timer: 2-
sec. / Self-timer: Continuous
123
Image review time Off / 2 sec. / 4 sec. / 8 sec. / Hold 288
Release shutter
without card Enable / Disable 287
Red-eye reduction Disable / Enable 183
AF method u+Tracking / Smooth zone / Live 1-point AF 214
Touch Shutter Disable / Enable 224
Grid display Off / 3x3 l / 6x4 m / 3x3+diag n209
3 Menu Settings
404
z: Shooting 1 (Red) Page
*1: Cannot be set for Live View shooting.
*2: Displayed after paring with Wireless Remote Control BR-E1 (sold separately).
*3: [ONE SHOT/SERVO] will take effect for Live View shooting.
z: Shooting 2 (Red)
* During Live View shooting or when [s: Shooting screen] is set to [Guided],
exposure compensation can be set up to ±3 stops.
Viewfinder Shooting and Live View Shooting
(Creative Zone Modes)
Image quality 73/83/74/84/7a/8a/b/1+73/1128
Drive mode
Single shooting / Continuous shooting / Silent
single shooting*1 / Silent continuous shooting*1 /
Self-timer: 10-sec./remote control*2 / Self-timer:
2-sec. / Self-timer: Continuous
123
Image review time Off / 2 sec. / 4 sec. / 8 sec. / Hold 288
Release shutter
without card Enable / Disable 287
AF operation*3ONE SHOT / AI FOCUS / AI SERVO 114
Lens electronic MF Disable after One-Shot AF /
Enable after One-Shot AF 118
Exposure compensation/
AEB setting
1/3- and 1/2-stop increments, ±5 stops*
(AEB ±2 stops) 176
Lens aberration
correction
Peripheral illumination correction: Enable / Disable
153
Chromatic aberration correction: Enable / Disable
Distortion correction: Disable / Enable
Diffraction correction: Enable / Disable
Flash control
Flash firing / E-TTL II metering / Flash
synchronization speed in Av mode / Built-in flash
settings / External flash function settings /
External flash C.Fn setting / Clear settings
189
Red-eye reduction Disable / Enable 183
zISO speed ISO speed setting 132
zISO Auto Max.:400 / Max.:800 / Max.:1600 / Max.:3200 /
Max.:6400 / Max.:12800 / Max.:25600 134
405
3 Menu Settings
z: Shooting 3 (Red) Page
z: Shooting 4 (Red)
* Not displayed for Live View shooting.
Metering mode
q Evaluative metering / w Partial metering /
r Spot metering / e Center-weighted
average metering
172
Auto Lighting
Optimizer
Disable / Low / Standard / High 149
Disable during manual exposure
White balance Q (Ambience priority) / Qw (White priority) /
W/E/R/Y/U/D/O143
Custom White Balance Manual setting of white balance 145
White balance shift/
bracketing
White balance correction: B/A/M/G bias,
9 levels each 147
White balance bracketing: B/A and M/G bias,
single-level increments, ±3 levels 148
Color space sRGB / Adobe RGB 159
Picture Style
DAuto / PStandard / QPortrait /
RLandscape / uFine Detail /
SNeutral / UFaithful / VMonochrome /
WUser Defined 1-3
135
Long exposure noise
reduction Disable / Auto / Enable 151
High ISO speed noise
reduction
Disable / Low / Standard / High / Multi Shot
Noise Reduction 150
Dust Delete Data
Obtain data to be used with Digital Photo
Professional (EOS software) to delete dust
spots
304
Live View shooting*Enable / Disable 197
3 Menu Settings
406
z: Shooting 5* (Red)
* Displayed for Live View shooting.
x: Playback 1 (Blue) Page
x: Playback 2 (Blue)
x: Playback 3 (Blue)
AF method u+Tracking / Smooth zone / Live 1-point AF 214
Touch Shutter Disable / Enable 224
Metering timer 4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. / 10
min. / 30 min. 209
Grid display Off / 3x3 l / 6x4 m / 3x3+diag n209
Aspect ratio 3:2 / 4:3 / 16:9 / 1:1 210
Protect images Protect images 336
Rotate image Rotate images 316
Erase images Erase images 339
Print order Specify images to be printed (DPOF) 342
Photobook Set-up Specify images for a photobook 346
Creative filters
Grainy B/W / Soft focus / Fish-eye effect / Art
bold effect / Water painting effect / Toy camera
effect / Miniature effect
356
Cropping Crop part of the image 361
Resize Downsize JPEG image’s pixel count 359
Rating Rate images 317
Slide show Display time / Repeat / Transition effect /
Background music 330
Set image search
conditions Rating / Date / Folder / Protect / Type of file 320
Image jump w/6
1 image / 10 images / Jump images by the
specified number / Date / Folder / Movies /
Stills / Protect / Rating
311
AF point display Disable / Enable 349
Histogram display Brightness / RGB 353
Control over HDMI Disable / Enable 334
407
3 Menu Settings
5: Set-up 1 (Yellow) Page
* For details, refer to the Wi-Fi (Wireless Communication) Function Instruction
Manual.
Select folder Create and select a folder 290
File numbering Numbering: Continuous / Auto reset 292
Manual reset 294
Auto rotate OnzD / OnD / Off 297
Format card Erase data on the card by formatting 68
Eye-Fi settings Displayed when a commercially-available
Eye-Fi card is inserted 387
Wireless
communication
settings
Wi-Fi settings:
Wi-Fi/NFC connection / Password / Connection
history / MAC address
-*
Wi-Fi function:
Transfer images between cameras / Connect to
smartphone / Remote control (EOS Utility) /
Print from Wi-Fi printer / Upload to Web service
Bluetooth function:
Bluetooth function / Pairing / Check/clear
connection info / Bluetooth address
Send images to smartphone
Nickname
Clear settings
When using a wireless communication function or GPS device, be sure to
check the countries and region of use, and observe the laws and regulations
of the country or region.
3 Menu Settings
408
5: Set-up 2 (Yellow) Page
*1: Not displayed for Live View shooting or movie shooting.
*2: Settable after GPS Receiver GP-E2 (sold separately) is attached or after the
camera is paired with a smartphone.
5: Set-up 3 (Yellow)
Auto power off 10 sec/30 sec / 30 sec. / 1 min. / 2 min. /
4 min. / 8 min. / 15 min. / Disable 288
LCD brightness Adjust the brightness (seven levels) 289
LCD off/on button*1Shutter button / Shutter/DISP / Remains on 301
Date/Time/Zone
Date (year, month, day) / Time (hour, min., sec.) /
Daylight saving time / Time zone
44
Language KSelect the interface language 47
GPS device settings*2Disable / GPS receiver / Smartphone 282
Video system For NTSC / For PAL 333
Touch control Standard / Sensitive / Disable 67
Switch S/A button Disable / Enable 119
Beep Enable / Touch n / Disable 287
Battery information Remaining capacity / Recharge performance 380
Sensor cleaning
Auto cleaningf: Enable / Disable 302
Clean nowf
Clean manually 306
Shaded menu options are not displayed in Basic Zone modes.
409
3 Menu Settings
5: Set-up 4 (Yellow) Page
* Not displayed for Live View shooting or movie shooting.
s: Display level settings (Blue green)
* Cannot be set for Live View shooting or movie shooting.
9: My Menu* (Green)
* Not displayed when [s: Menu display] is set to [Guided].
Custom Functions
(C.Fn) Customize camera functions as desired 366
Clear settings Clear all camera settings / Clear all Custom
Functions (C.Fn) 298
Copyright information
Display copyright information / Enter author’s
name / Enter copyright details / Delete
copyright information
295
Manual/software URL QR code for the download site 5
Certification Logo
Display
Displays some of the logos of the camera’s
certifications 379
z firmware ver.* For updating the firmware -
Shooting screen* Guided / Standard 52
Menu display Guided / Standard 54
Mode guide* Enable / Disable 55
Feature guide Enable / Disable 56
Add My Menu tab Add My Menu tabs 1-5 373
Delete all My Menu
tabs Delete all My Menu tabs 376
Delete all items Delete all items under My Menu tabs 1-5 376
Menu display Normal display / Display from My Menu tab /
Display only My Menu tab 377
To prevent an inadvertent update of the firmware, selecting [z firmware
ver.] will disable touch control.
3 Menu Settings
410
z: Shooting 1 (Red) Page
* In Basic Zone modes, the settings available for [Sound recording] will be
[On/Off].
z: Shooting 2 (Red)
* Settable only for manual exposures.
k Movie Shooting
Movie recording size
• 1920x1080 / 1280x720 / 640x480
• NTSC: 59.94p / 29.97p / 23.98p
PAL: 50.00p / 25.00p
• Standard / Light
245
Digital zoom Disable / Approx. 3-10x zoom 248
Sound recording*
Sound recording: Auto / Manual / Disable
271
Recording level
Wind filter: Auto / Disable
Attenuator: Disable / Enable
Lens aberration
correction
Peripheral illumination correction: Enable /
Disable 153
Chromatic aberration correction: Enable /
Disable
Lens electronic MF Disable after One-Shot AF /
Enable after One-Shot AF 118
Exposure
compensation 1/3- and 1/2-stop increments, ±3 stops 176
kISO speed* ISO speed setting 132
277
kISO Auto Max.:6400 / Max.:12800 277
Auto Lighting
Optimizer
Disable / Low / Standard / High 149
Disable during manual exposure
411
3 Menu Settings
z: Shooting 3 (Red) Page
z: Shooting 4* (Red)
* In Basic Zone modes, these menu options are displayed under the [z2] tab.
z: Shooting 5* (Red)
* In Basic Zone modes, these menu options are displayed under the [z3] tab.
Picture Style
DAuto / PStandard / QPortrait /
RLandscape / uFine Detail / SNeutral /
UFaithful / VMonochrome /
WUser Defined 1-3
135
White balance Q (Ambience priority) / Qw (White priority) /
W/E/R/Y/U/D/O143
Custom White
Balance Manual setting of white balance 145
White balance shift B/A/M/G bias, 9 levels each 147
Movie Servo AF Enable / Disable 273
AF method u+Tracking / Smooth zone / Live 1-point AF 274
Metering timer 4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. /
10 min. / 30 min. 274
Grid display Off / 3x3 l / 6x4 m / 3x3+diag n275
V button function a/-/q/-/a/k/q/k275
Video snapshot
Video snapshot: Disable / Enable
261
Album settings: Create a new album /
Add to existing album
Show confirm message: Enable / Disable
Time-lapse movie
Disable / Enable (Interval / Number of shots /
Auto exposure / LCD auto off / Beep as image
taken)
254
Remote control
shooting Disable / Enable 276
412
If a problem occurs with the camera, first consult this Troubleshooting
Guide. If this Troubleshooting Guide does not resolve the problem,
contact your dealer or nearest Canon Service Center.
Do not use any battery other than genuine Canon Battery Pack
LP-E17.
If (1) the battery charger or battery has a problem or (2)
communication with the battery failed (with a non-Canon battery pack),
the protection circuit will stop charging, and the charge lamp will blink
in orange. In the case of (1), unplug the charger’s power plug from the
power outlet. Detach and reattach the battery to the charger. Wait two
or three minutes, then reconnect the power plug to the power outlet. If
the problem persists, contact your dealer or nearest Canon Service
Center.
Make sure the battery is installed properly in the camera (p.38).
Make sure the card slot/battery compartment cover is closed (p.38).
Recharge the battery (p.36).
Press the <U> button (p.70).
If the power is turned off while an image is being recorded to the card,
the access lamp will remain on or continue to blink for a few seconds.
When the image recording is complete, the power will turn off
automatically.
Troubleshooting Guide
Power-Related Problems
The battery does not recharge.
The battery charger’s lamp blinks.
The camera is not activated even when
the power switch is set to <1>.
The access lamp still blinks even when
the power switch is <2>.
413
Troubleshooting Guide
Do not use any battery other than genuine Canon Battery Pack
LP-E17.
Remove and install the battery again (p.38).
If the electrical contacts are dirty, use a soft cloth to clean them.
Use a fully-charged battery (p.36).
The battery performance may have degraded. See [53: Battery info.]
to check the battery’s recharge performance level (p.380). If the
battery performance is poor, replace the battery with a new one.
The number of possible shots will decrease with any of the following
operations:
• Pressing the shutter button halfway for a prolonged period.
• Activating the AF frequently without taking a picture.
• Using the lens’s Image Stabilizer.
• Using the LCD monitor frequently.
• Continuing Live View shooting or movie shooting for a prolonged
period.
• Using the Bluetooth function.
• Using the Wi-Fi function.
• The Eye-Fi card’s transmission is enabled.
Auto power off is in effect. If you do not want auto power off to take
effect, set [52: Auto power off] to [Disable] (p.288).
Even if [52: Auto power off] is set to [Disable], the LCD monitor will
still turn off after the camera is left idle for approx. 30 min.
(The camera’s power does not turn off.) Press the <U> button to
turn on the LCD monitor.
[Battery communication error. Does this battery/do these
batteries display the Canon logo?] is displayed.
The battery becomes exhausted quickly.
The camera turns off by itself.
Troubleshooting Guide
414
The camera cannot be used with EF-M lenses (p.48).
Make sure the card is properly inserted (p.38).
Slide the card’s write-protect switch to the Write/Erase setting (p.38).
If the card is full, replace the card or delete unnecessary images to
make space (p.38, 339).
You cannot take a picture when focus indicator <o> in the viewfinder
blinks during focusing with One-Shot AF. Press the shutter button half-
way again to refocus automatically, or focus manually (p.51, 122).
If a card error message is displayed, see page 40 or 427.
Since SDXC cards are formatted in exFAT, if you format a card with
this camera and then insert it into another camera, an error may be
displayed and it may not be possible to use the card.
Shooting-Related Problems
The lens cannot be attached.
No images can be shot or recorded.
The card cannot be used.
An error message is displayed when
the card is inserted in another camera.
415
Troubleshooting Guide
Set the lens’s focus mode switch to <AF> (p.48).
Press the shutter button gently to prevent camera shake (p.50-51).
With a lens equipped with the Image Stabilizer, set the IS switch to
<1>.
In low light, the shutter speed may become slow. Use a faster shutter
speed (p.164), set a higher ISO speed (p.132), use flash (p.182), or
use a tripod.
Set the AF operation to One-Shot AF. Focus lock is not possible in the
AI Servo AF mode or when servo takes effect in AI Focus AF mode
(p.114).
Horizontal stripes (noise) or irregular exposures can be caused by
fluorescent lighting, LED lighting, or other light sources during
viewfinder or Live View shooting. Also, the exposure or color tone may
not come out right. A slow shutter speed may reduce the problem.
The image is out of focus or blurred.
I cannot lock the focus and recompose the shot.
Horizontal stripes appear, or the exposure or color tone
look strange.
Troubleshooting Guide
416
During viewfinder shooting or Live View shooting, if you use a TS-E
lens (except the TS-E17mm f/4L or TS-E24mm f/3.5L II) and shift or tilt
the lens or use an extension tube, the standard exposure may not be
obtained or the exposure may be irregular.
The maximum continuous shooting speed may become slower
depending on the shutter speed, aperture, subject conditions,
brightness, lens, flash use, temperature, battery type, remaining
battery level, shooting function settings, etc. For details, see page 124.
If you shoot a subject that has fine detail such as a field of grass, the
file size will be larger, and the actual maximum burst may be lower
than the number listed on page 129.
Under [54: Custom Functions(C.Fn)], if [4: Highlight tone priority]
is set to [1:Enable], ISO 100 cannot be set. If [0:Disable] is set, ISO
100 can be set (p.367). This also applies to movie shooting (p.239).
The standard exposure cannot be
obtained or the exposure is irregular.
The continuous shooting speed is slow.
The maximum burst during continuous shooting is lower.
ISO 100 cannot be set.
417
Troubleshooting Guide
Under [54: Custom Functions(C.Fn)], if [4: Highlight tone priority]
is set to [1:Enable], the settable ISO speed range will be ISO 200 -
ISO 25600 (up to ISO 12800 for movies) even when [2: ISO
expansion] is set to [1:On]. If [0:Disable] is set for [4: Highlight tone
priority], [H] can be set (p.367). This also applies to movie shooting
(p.239).
Under [54: Custom Functions(C.Fn)], if [4: Highlight tone priority]
is set to [1:Enable], the Auto Lighting Optimizer cannot be set. If
[0:Disable] is set, the Auto Lighting Optimizer can be set (p.367).
Set [z3: Auto Lighting Optimizer] to [Disable]. When [Standard]
[Low] [High] is set, even if you set a decreased exposure
compensation or flash exposure compensation, the image may come
out bright (p.149).
If you shoot at night when the background is dark, the shutter speed
automatically becomes slow (slow-sync shooting) so that both the
subject and background are properly exposed. To prevent a slow
shutter speed, under [z2: Flash control], set [Flash sync. speed in
Av mode] to [1/200-1/60sec. auto] or [1/200 sec. (fixed)] (p.190).
Expanded ISO speeds cannot be selected.
The Auto Lighting Optimizer cannot be set.
Even if I set a decreased exposure compensation,
the image comes out bright.
When I use the <f> mode with flash,
the shutter speed becomes slow.
Troubleshooting Guide
418
In shooting modes (<A> <C> <8: 2qC46>
<v: GWXZH>) whose default setting is <a> (Built-in autoflash),
the built-in flash will be raised automatically when necessary.
In the <8: xG> and <v: ABCD> modes, when you
press the shutter button halfway under low-light conditions, the built-in
flash may be raised automatically and emit the AF-assist beam.
If you use the built-in flash too often in too short a period of time, the
flash may stop firing for a while to protect the light-emitting unit.
If you use a flash unit other than an EX-series Speedlite, the flash will
always fire at full output (p.188).
Under [z2: Flash control], if [Flash metering mode] in [External
flash C.Fn setting] is set to [TTL flash metering] (autoflash), the
flash will always fire at full output (p.194).
If flash exposure compensation is set with the external Speedlite,
compensation amount cannot be set with the camera. When the
external Speedlite’s flash exposure compensation is canceled (set to
0), flash exposure compensation can be set with the camera.
Under [z2: Flash control], set [Flash sync. speed in Av mode] to
[Auto] (p.190).
The built-in flash rises by itself.
The built-in flash does not fire.
The external flash always fires at full output.
Flash exposure compensation cannot be
set for the external Speedlite.
High-speed sync cannot be set in the <f> mode.
419
Troubleshooting Guide
A small noise may be heard when the camera’s internal mechanism
moves slightly.
If you use flash, the shutter will make two release sounds each time
you shoot (p.198).
It indicates that the camera’s internal temperature is high. If the white
<s> icon is displayed, the still photo’s image quality may deteriorate.
If the red <E> icon is displayed, it indicates that the Live View
shooting will soon stop automatically (p.230).
It indicates that the camera’s internal temperature is high. If the red
<E> icon is displayed, it indicates that the movie shooting will soon
stop automatically (p.278).
If the card’s writing speed is slow, movie shooting may stop
automatically. For cards that can record movies, see page 8. To find
out the card’s writing speed, refer to the card manufacturer’s Web site,
etc.
If you shoot a movie for 29 min. 59 sec., the movie shooting will stop
automatically.
The camera makes a noise when it is shaken.
The shutter makes two release sounds during
Live View shooting.
During Live View shooting, a white s or
red E icon is displayed.
During movie shooting, the red E icon is displayed.
Movie shooting stops by itself.
Troubleshooting Guide
420
In shooting modes other than <a>, the ISO speed is set
automatically.
In the <a> mode, you can manually set the ISO speed (p.239).
If you change the shutter speed or aperture during movie shooting, the
changes in the exposure may be recorded.
Zooming the lens during movie shooting may cause changes in the
exposure regardless of whether the lens’s maximum aperture changes
or not. The changes in the exposure may be recorded as a result.
If you move the camera to the left or right or shoot a moving subject,
the image may look distorted.
Flickering, horizontal stripes (noise), or irregular exposures can be
caused by fluorescent lighting, LED lighting, or other light sources
during movie shooting. Also, changes in the exposure (brightness) or
color tone may be recorded. Note that in the <a> mode, a slow
shutter speed may reduce the problem.
The ISO speed cannot be set for movie shooting.
The exposure changes during movie shooting.
The subject looks distorted during movie shooting.
The image flickers or horizontal stripes appear during
movie shooting.
421
Troubleshooting Guide
If the camera is connected to a computer or other device with an
interface cable, Wi-Fi functions cannot be set. ([51: Wireless
communication settings] will be grayed out.) Disconnect the
interface cable before setting any functions.
Refer to the Wi-Fi (Wireless Communication) Function Instruction
Manual.
Under [54: Custom Functions(C.Fn)], check the [9: Assign SET
button] setting (p.371).
For movie shooting, check the [V btn function] setting (p.275).
Check if your finger is blocking the speaker (p.28).
Check if [53: Touch control] is set to [Standard] or [Sensitive]
(p.67).
Wi-Fi
Wi-Fi cannot be set.
Operation Problems
A camera button or dial does not work as expected.
During touch screen operations, the beeper suddenly
sounds softer.
Touch operation is not possible.
Troubleshooting Guide
422
Certain tabs or menu options are not displayed in Basic Zone modes.
Set the shooting mode to a Creative Zone mode (p.60).
Under the [9] tab, [Menu display] is set to [Display only My Menu
tab] (p.377).
Set the color space to sRGB. If Adobe RGB is set, the first character
will be an underscore (p.159).
It is a movie file (p.294).
If the card already contains recorded images, the image file number
may not start from 0001 (p.294).
Make sure the correct date and time are set (p.44).
Check the time zone and daylight saving time (p.44).
The shooting date and time do not appear in the image. The date and
time are recorded in the image data as shooting information. When
printing, you can imprint the date and time in the picture, using the
date and time recorded in the shooting information (p.342).
Display Problems
The menu screen shows fewer tabs and options.
The file name’s first character is an underscore (“_”).
The file name starts with “MVI_”.
The file numbering does not start from 0001.
The shooting date and time displayed are incorrect.
The date and time are not in the image.
423
Troubleshooting Guide
If the number of images recorded on the card exceeds the number the
camera can display, [###] will be displayed (p.319).
If the LCD monitor is dirty, use a soft cloth to clean it.
In low or high temperatures, the LCD monitor display may seem slow
or may look black. It will return to normal at room temperature.
[Eye-Fi settings] will appear only when an Eye-Fi card is installed in
the camera. If the Eye-Fi card has a write-protect switch set to the
LOCK position, you will not be able to check the card’s connection
status or disable Eye-Fi transmission (p.387).
If [Wi-Fi] is set to [Enable] for [Wi-Fi settings] under [51: Wireless
communication settings], [Eye-Fi settings] cannot be selected even
when an Eye-Fi card is installed.
[###] is displayed.
The LCD monitor does not display a clear image.
[Eye-Fi settings] does not appear.
Troubleshooting Guide
424
It is the highlight alert (p.353). Overexposed areas with clipped
highlights will blink.
If the image is protected, it cannot be erased (p.336).
Movies edited with a computer cannot be played back with the
camera.
If you operate the camera’s dials or lens during movie shooting, the
operation sound will also be recorded. Using the Directional Stereo
Microphone DM-E1 (sold separately) is recommended (p.271).
If there is a drastic change in the exposure level during autoexposure
movie shooting, the recording will stop momentarily until the
brightness stabilizes. In such a case, shoot in the <a> mode (p.238).
Make sure the [53: Video system] is correctly set to [For NTSC] or
[For PAL] (depending on the video system of your TV set).
Make sure the HDMI cable’s plug is inserted all the way in (p.333).
Playback Problems
Part of the image blinks in black.
The image cannot be erased.
The movie cannot be played back.
Operation sound and mechanical sound can be
heard during movie playback.
The movie appears to freeze momentarily.
No picture appears on the TV set.
425
Troubleshooting Guide
If the movie file size reaches 4 GB, another movie file will be created
automatically (p.247). However, if you use an SDXC card formatted
with the camera, you can record a movie in a single file even if it
exceeds 4 GB.
Depending on the card reader used and the computer’s operating
system, SDXC cards may not be correctly recognized. In such a case,
connect your camera to the computer with the interface cable, then
transfer the images to the computer using EOS Utility (EOS software,
p.444).
With this camera, you cannot resize JPEG b or RAW images (p.359).
With this camera, you cannot crop RAW images (p.361).
[33: AF point disp.] is set to [Enable] (p.349).
Even if [33: AF point disp.] is set to [Enable] (p.349), the red box is
not displayed for the following images:
• Images shot with Multi Shot Noise Reduction (p.150)
• Images recorded with distortion correction enabled (p.155)
• Images shot with <8: qFG> or <v: ABCD>
• Cropped images (p.361)
• Images with Fish-eye effect applied after shooting (p.356)
There are multiple movie files for a single movie shoot.
My card reader does not recognize the card.
The image cannot be resized.
The image cannot be cropped.
A red box is displayed on the image.
A red box is not displayed on the image.
Troubleshooting Guide
426
White, red, blue, or other colored dots of light may appear on images if
the sensor is affected by cosmic rays, etc. Their appearance may be
reduced by performing [Clean nowf] under [53: Sensor cleaning]
(p.302).
When you select [Clean nowf], the shutter will make a mechanical
sound, but no picture is taken (p.302).
If you repeatedly turn the power switch <1> and <2> within a
short time period, the <f> icon may not be displayed (p.42).
When using EOS Utility (EOS software), set [z5: Time-lapse movie]
to [Disable] (p.254).
Install EOS software on the computer (p.444).
While a Wi-Fi connection is established, the camera cannot be
connected to a computer with an interface cable.
Dots of light appear on the image.
Sensor Cleaning Problems
The shutter makes a sound during sensor cleaning.
Automatic sensor cleaning does not work.
Computer Connection Problems
Communication between the connected camera and
computer does not work.
I cannot transfer images to a computer.
427
If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.
*If the error message still appears after following the above instructions,
write down the error code number and contact your nearest Canon Service
Center.
Error Codes
Number Error Message and Solution
01
Communications between the camera and lens is faulty. Clean the
lens contacts.
ÎClean the electrical contacts on the camera and lens, use a Canon
lens, or remove and install the battery again (p.27, 48, 38).
02
Card cannot be accessed. Reinsert/change card or format card
with the camera.
ÎRemove and insert the card again, replace the card, or format the
card (p.38, 68).
04
Cannot save images because card is full. Replace card.
ÎReplace the card, erase unnecessary images, or format the card
(p.38, 339, 68).
05
The built-in flash could not be raised. Turn the camera off and on
again.
ÎOperate the power switch (p.42).
06
Sensor cleaning could not be performed. Turn the camera off and
on again.
ÎOperate the power switch (p.42).
10, 20
30, 40
50, 60
70, 80
99
An error prevented shooting. Turn the camera off and on again or
re-install the battery.
ÎOperate the power switch, remove and install the battery again, or
use a Canon lens (p.42, 38, 48).
Error number
Cause and countermeasures
428
•Type
Type: Digital, single-lens reflex, AF/AE camera with built-in
flash
Recording media: SD/SDHC*/SDXC* memory cards
* UHS-I cards supported
Image sensor size: Approx. 22.3 x 14.9 mm
Compatible lenses: Canon EF lenses (including EF-S lenses)
* Excluding EF-M lenses
(35mm-equivalent angle of view is that of a lens with
approx. 1.6x the focal length indicated.)
Lens mount: Canon EF mount
• Image Sensor
Type: CMOS sensor
Effective pixels: Approx. 24.2 megapixels
* Rounded to the nearest 100,000.
Aspect ratio: 3:2
Dust deletion: Auto, Manual, Dust Delete Data appending
• Recording System
Recording format: Design rule for Camera File System (DCF) 2.0
Image type: JPEG, RAW (14-bit Canon original),
RAW+JPEG Large simultaneous recording possible
Pixels recorded: L (Large) : 24.0 megapixels (6000 x 4000)
M (Medium) : Approx. 10.6 megapixels (3984 x 2656)
S1 (Small 1) : Approx. 5.9 megapixels (2976 x 1984)
S2 (Small 2) : Approx. 3.8 megapixels (2400 x 1600)
RAW : 24.0 megapixels (6000 x 4000)
Aspect ratio: 3:2, 4:3, 16:9, 1:1
Folder Creation/
selection:
Possible
File numbering: Continuous, Auto reset, Manual reset
Specifications
429
Specifications
• Image Processing During Shooting
Picture Style: Auto, Standard, Portrait, Landscape, Fine Detail,
Neutral, Faithful, Monochrome, User Defined 1 - 3
White balance: Auto (Ambience priority), Auto (White priority), Preset
(Daylight, Shade, Cloudy, Tungsten light, White
fluorescent light, Flash), Custom
White balance correction, and White balance bracketing
provided
* Flash color temperature information transmission
possible
Noise reduction: Applicable to long exposures and high ISO speed shots
Automatic image
brightness correction:
Auto Lighting Optimizer provided
Highlight tone priority: Provided
Lens aberration
correction:
Peripheral illumination correction, Chromatic aberration
correction, Distortion correction, Diffraction correction
• Viewfinder
Type: Eye-level pentamirror
Field of view coverage: Vertical/Horizontal approx. 95% (with Eye point approx.
19 mm)
Magnification: Approx. 0.87x (-1 m-1 with 50mm lens at infinity)
Eyepoint: Approx. 19 mm (from eyepiece lens center at -1 m-1)
Dioptric adjustment
range:
Approx. -3.0 - +1.0 m-1 (dpt)
Focusing screen: Fixed, Precision Matte
Mirror: Quick-return type
Depth-of-field preview: Provided
Specifications
430
• Autofocus (for viewfinder shooting)
Type: TTL secondary image-registration, phase-difference
detection with the dedicated AF sensor
AF points: 9-point AF (Center point: cross-type, vertical line
sensitive when supporting f/2.8)
Focusing brightness
range:
EV -0.5 - 18 (with the center AF point supporting f/2.8,
One-Shot AF, at room temperature, ISO 100)
Focus operation: One-Shot AF, AI Servo AF, AI Focus AF,
Manual focusing (MF)
AF-assist beam: Small series of flashes fired by built-in flash
• Exposure Control
Metering mode: 63-zone TTL open-aperture metering
• Evaluative metering (linked to all AF points)
• Partial metering (approx. 9.0% of viewfinder at center)
• Spot metering (approx. 4.0% of viewfinder at center)
• Center-weighted average metering
Metering brightness
range:
EV 1 - 20 (at room temperature, ISO 100)
Shooting mode: Basic Zone modes:
Scene Intelligent Auto, Flash Off, Creative Auto, Special
scene modes (Portrait, Group Photo, Landscape, Sports,
Kids, Close-up, Food, Candlelight, Night Portrait,
Handheld Night Scene, HDR Backlight Control), Creative
filters (Grainy B/W, Soft focus, Fish-eye effect, Water
painting effect, Toy camera effect, Miniature effect, HDR
art standard, HDR art vivid, HDR art bold, HDR art
embossed)
Creative Zone modes:
Program AE, Shutter-priority AE, Aperture-priority AE,
Manual exposure
431
Specifications
ISO speed
(Recommended
exposure index):
Basic Zone modes: ISO speed set automatically
Creative Zone modes: ISO Auto, ISO 100 - ISO 25600
set manually (whole-stop increments), and ISO
expansion to H (equivalent to ISO 51200) provided
ISO speed settings: Maximum limit for ISO Auto settable
Exposure
compensation:
Manual: ±5* stops in 1/3- or 1/2-stop increments
* ±3 stops with [Shooting screen: Guided] set
AEB: ±2 stops in 1/3- or 1/2-stop increments (can be
combined with manual exposure compensation)
AE lock: Auto: Applied in One-Shot AF with evaluative metering
when focus is achieved
Manual: With AE lock button
•Shutter
Type: Electronically-controlled, focal-plane shutter
Shutter speed: 1/4000 sec. to 30 sec. (total shutter speed range;
available range varies by shooting mode), Bulb, X-sync
at 1/200 sec.
• Drive System
Drive mode: Single shooting, Continuous shooting, Silent single
shooting, Silent continuous shooting, 10-sec. self-timer/
remote control*, 2-sec. delay, 10-sec. delay with
continuous shooting
* When Wireless Remote Control BR-E1 (sold
separately) is used.
Continuous shooting
speed:
Max. approx. 5.0 shots/sec.*
* Max. approx. 3.5 shots/sec. during Live View shooting
or when [Servo AF] is set.
Silent continuous shooting: Max. approx. 2.5 shots/sec.
Max. burst: JPEG Large/Fine: Full (Full)
RAW: Approx. 6 shots (approx. 6 shots)
RAW+JPEG Large/Fine: Approx. 6 shots (approx. 6
shots)
* Figures are based on Canon’s testing standards (3:2
aspect ratio, ISO 100 and Standard Picture Style) using
a Canon’s standard testing 8 GB card.
* Figures in parentheses are the number of shots when a
Canon’s standard testing UHS-I 16 GB card is used.
* “Full” indicates that shooting is possible until the card
becomes full.
Specifications
432
•Flash
Built-in flash: Retractable, auto pop-up flash
Guide No.: Approx. 9.8/32.1 (ISO 100, in meters/feet)
Flash coverage: Approx. 18mm lens angle of view
Recharge time: Approx. 3 sec.
External Speedlite: Compatible with EX-series Speedlites
Flash metering: E-TTL II autoflash
Flash exposure
compensation:
±2 stops in 1/3- or 1/2-stop increments
FE lock: Provided
PC terminal: Not provided
Flash control: Built-in flash function settings, external Speedlite function
settings, external Speedlite Custom Function settings
• Live View Shooting
Focus method: Dual Pixel CMOS AF system
AF method: Face+Tracking, Smooth zone, Live 1-point AF
Manual focus (approx. 5x / 10x magnification possible)
AF operation: One-Shot AF, Servo AF
Focusing brightness
range:
EV -2 - 18 (at room temperature, ISO 100, One-Shot AF)
Metering mode: Evaluative metering (315 zones), Partial metering
(approx. 6.0% of Live View screen), Spot metering
(approx. 2.6% of Live View screen), Center-weighted
average metering
Metering brightness
range:
EV 0 - 20 (at room temperature, ISO 100)
Exposure
compensation:
±3 stops in 1/3-stop or 1/2-stop increments
Creative filters: Provided
Touch Shutter: Provided
Grid display: Three types
433
Specifications
• Movie Shooting
Recording format: MP4
* Time-lapse movie shooting: MOV
Movie: MPEG-4 AVC / H.264
Variable (average) bit rate
Audio: AAC
Recording size and
frame rate:
Full HD (1920x1080): 59.94p/50.00p/29.97p/25.00p/
23.98p
HD (1280x720) : 59.94p/50.00p/29.97p/25.00p
VGA (640x480) : 29.97p/25.00p
Compression method: IPB (Standard), IPB (Light)
* Time-lapse movie shooting: ALL-I
Bit rate: Full HD (59.94p/50.00p)/IPB (Standard)
: Approx. 60 Mbps
Full HD (29.97p/25.00p/23.98p)/IPB (Standard)
: Approx. 30 Mbps
Full HD (29.97p/25.00p)/IPB (Light) : Approx. 12 Mbps
HD (59.94p/50.00p)/IPB (Standard) : Approx. 26 Mbps
HD (29.97p/25.00p)/IPB (Light) : Approx. 4 Mbps
VGA (29.97p/25.00p) (Standard) : Approx. 9 Mbps
VGA (29.97p/25.00p) (Light) : Approx. 3 Mbps
HDR movie : Approx. 30 Mbps
Time-lapse movie : Approx. 90 Mbps
Focus system: Dual Pixel CMOS AF system
AF method: Face+Tracking, Smooth zone, Live 1-point AF
Manual focus (approx. 5x / 10x magnification available
for focus check)
Movie Servo AF: Provided
Digital zoom: Approx. 3x - 10x
Focusing brightness
range:
EV -2 - 18 (at room temperature, ISO 100, One-Shot AF)
Metering mode: Center-weighted average and Evaluative metering with
the image sensor
* Automatically set by the AF method
Specifications
434
Metering brightness
range:
EV 0 - 20 (at room temperature, ISO 100, with center-
weighted average metering)
Exposure control: Autoexposure shooting (Program AE for movie shooting)
and manual exposure
Exposure
compensation:
±3 stops in 1/3- or 1/2-stop increments
ISO speed
(Recommended
exposure index):
For autoexposure shooting: ISO 100 - ISO 12800 set
automatically. In Creative Zone modes, the upper limit is
expandable to H (equivalent to ISO 25600).
For manual exposure shooting: ISO Auto (ISO 100 - ISO
12800 set automatically), ISO 100 - ISO 12800 set
manually (whole-stop increments), expandable to H
(equivalent to ISO 25600)
ISO speed settings: Maximum limit for ISO Auto settable
HDR movie shooting: Possible
Creative filters for
movies:
Dream, Old Movies, Memory, Dramatic B&W, Miniature
effect movie
Video snapshots: Settable to 2 sec., 4 sec., 8 sec.
Sound recording: Built-in stereo microphones, external stereo microphone
terminal provided
Sound-recording level adjustable, wind filter provided,
attenuator provided
Grid display: Three types
Time-lapse movie: Shooting interval (hours:minutes:seconds), Number of
shots, Auto exposure (Fixed 1st frame, Each frame),
LCD auto off, Beep as image shot settable
Still photo shooting: Not possible during movie shooting
•LCD Monitor
Type: TFT color, liquid-crystal monitor
Monitor size and dots: Wide 7.7 cm (3.0 in) (3:2) with approx. 1.04 million dots
Brightness adjustment: Manual (7 levels)
Interface languages: 25
Touch screen
technology:
Capacitive sensing
435
Specifications
•Playback
Image display format: Single-image display (without shooting information),
Single-image display (with basic information), Single-
image display (Shooting information displayed: Detailed
information, Lens/histogram, White balance, Picture
Style 1, Picture Style 2, Color space/noise reduction,
Lens aberration correction), Index display (4/9/36/100
images)
Highlight alert: Overexposed highlights blink
AF point display: Provided (may not be displayed depending on shooting
conditions)
Zoom magnification
ratio:
Approx. 1.5x - 10x
Image search: Search conditions settable (Rating, Date, Folder, Protect,
File type)
Image browsing
methods:
Single image, 10 images, specified number, date, folder,
movies, stills, protect, rating
Image rotation: Provided
Image protection: Provided
Rating: Provided
Movie playback: Possible (LCD monitor, HDMI), built-in speaker
Slide show: Automatically play back all images or the images that
match search conditions
Background music: Selectable for slide shows and movie playback
• Post-Processing of Images
Creative filters: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect,
Water painting effect, Toy camera effect, Miniature effect
Resize: Provided
Cropping: Provided
• Print Ordering
DPOF: Version 1.1 compliant
Specifications
436
• Customization Features
Custom Functions: 11
My Menu: Up to 5 screens can be registered
Copyright information: Text entry and appending possible
Display level settings: Shooting screen, Menu display, Mode guide,
Feature guide
• Interface
DIGITAL terminal: Computer communication (Hi-Speed USB equivalent),
Connect Station CS100 connection
HDMI mini OUT
terminal:
Type C (Auto switching of resolution), CEC-compatible
External microphone IN
terminal:
3.5 mm diameter stereo mini-jack
Directional Stereo Microphone DM-E1 connection
Remote control terminal:For Remote Switch RS-60E3
Wireless remote control: Compatible with Wireless Remote Control BR-E1
(Bluetooth connection)
Eye-Fi card: Supported
•Power
Battery: Battery Pack LP-E17 (Quantity 1)
* AC power usable with household power outlet
accessories.
Number of possible
shots:
With viewfinder shooting: Approx. 650 shots at room
temperature (23°C/73°F), approx. 620 shots at low
temperatures (0°C/32°F)
With Live View shooting: Approx. 260 shots at room
temperature (23°C/73°F), approx. 240 shots at low
temperatures (0°C/32°F)
* With a fully-charged Battery Pack LP-E17
Movie shooting time: Approx. 2 hr. at room temperature (23°C/73°F)
Approx. 1 hr. 45 min. at low temperatures (0°C/32°F)
* With a fully-charged Battery Pack LP-E17
437
Specifications
• Dimensions and Weight
Dimensions (W x H x D):Approx. 122.4 x 92.6 x 69.8 mm / 4.82 x 3.65 x 2.75 in.
Weight (Black): Approx. 453 g / 15.98 oz. (Including battery and card)
Approx. 406 g / 14.32 oz. (Body only)
Weight (Silver): Approx. 454 g / 16.01 oz. (Including battery and card)
Approx. 407 g / 14.36 oz. (Body only)
Weight (White): Approx. 456 g / 16.08 oz. (Including battery and card)
Approx. 409 g / 14.43 oz. (Body only)
• Operation Environment
Working temperature
range:
0°C - 40°C / 32°F - 104°F
Working humidity: 85% or less
All the data above is based on Canon’s testing standards and CIPA (Camera &
Imaging Products Association) testing standards and guidelines.
Dimensions and weight listed above are based on CIPA Guidelines (except
weight for camera body only).
Product specifications and the exterior are subject to change without notice.
If a problem occurs with a non-Canon lens attached to the camera, consult the
respective lens manufacturer.
438
Trademarks
Adobe is a trademark of Adobe Systems Incorporated.
Microsoft and Windows are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and
other countries.
SDXC logo is a trademark of SD-3C, LLC.
HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license.
Other trademarks and trade names are those of their respective owners.
All other trademarks are the property of their respective owners.
About MPEG-4 Licensing
“This product is licensed under AT&T patents for the MPEG-4 standard and may be
used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video
that was encoded only (1) for a personal and non-commercial purpose or (2) by a
video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.”
* Notice displayed in English as required.
439
Third party software
This product includes third party software.
expat.h
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including without
limitation the rights to use, copy, modify, merge, publish, distribute,
sublicense, and/or sell copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
OR OTHER DEALINGS IN THE SOFTWARE.
440
Use of Genuine Canon Accessories Is Recommended
This product is designed to achieve optimum performance when used with
genuine Canon accessories. Therefore, using this product with genuine
accessories is highly recommended.
Canon shall not be liable for any damage to this product and/or accidents such
as malfunction, fire, etc. caused by the failure of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note
that repairs arising out of the malfunction of non-genuine accessories will not
be covered by the warranty for repairs, although you may request such repairs
on a chargeable basis.
441
Digital Camera Model DS126671 Systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
class B digital devices, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the digital camera must be used
with this equipment in order to comply with Class B limits in Subpart B of Part
15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Park, Melville, NY 11747, U.S.A.
Tel No. 1-800-OK-CANON (1-800-652-2666)
CAN ICES-3 (B) / NMB-3 (B)
442
USA and Canada only:
The Lithium ion/polymer battery that powers the product is
recyclable. Please call 1-800-8-BATTERY for information on
how to recycle this battery.
For CA, USA only
Included lithium battery contains Perchlorate Material – special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
443
14
Software Start Guide /
Downloading Images to a Computer
This chapter describes the following:
Overview of the software for EOS DIGITAL cameras
How to download and install the software on a computer
How to download and view the Software Instruction
Manuals (PDF files)
How to download images from the camera to a computer
444
This section describes an overview of various software applications for
EOS DIGITAL cameras. An Internet connection is required to download
and install the software. Download and installation are not possible in
environments with no Internet connection.
EOS Utility
With the camera connected to a computer, EOS Utility enables you to
transfer still photos and movies shot with the camera to the computer.
You can also use this software to set various camera settings and shoot
remotely from the computer connected to the camera. Also, you can
copy background music tracks, such as EOS Sample Music*, to the
card.
* You can use the background music as the soundtrack for a video snapshot
album, movie, or slide show played back with your camera.
Digital Photo Professional
This software is recommended for users who shoot RAW images. You
can view, edit, and print RAW and JPEG images.
* Certain functions differ between the version to be installed on a 64-bit computer
and that to be installed on a 32-bit computer.
Picture Style Editor
You can edit Picture Styles, and create and save original Picture Style
files. This software is aimed at advanced users who are experienced in
image processing.
Map Utility
Although this camera does not have GPS features built-in, you can
geotag images on the camera with GPS information recorded on a
smartphone using the dedicated Camera Connect application and
display the information on a map on a computer.
Software Start Guide
Software Overview
445
Software Start Guide
1Download the software.
Connect to the Internet from a computer and access the following
Canon Web site.
www.canon.com/icpd
Select your country or region of residence and download the
software.
Decompress it on the computer.
For Windows: Click the displayed installer file to start the
installer.
For Macintosh: A dmg file will be created and displayed. Follow
the steps below to start the installer.
(1) Double-click the dmg file.
XA drive icon and installer file will appear on the desktop.
If the installer file does not appear, double-click the drive
icon to display it.
(2) Double-click the installer file.
XThe installer starts.
2Follow the on-screen instructions to install.
Downloading and Installing the Software
Do not connect the camera to a computer before you install the
software. The software will not be installed correctly.
Even if a previous version of the software is installed on your computer,
follow the procedure below to install the latest version. (The previous
version will be overwritten.)
446
Internet connection is required to download the Software Instruction
Manuals (PDF files). Download is not possible in environments with no
Internet connection.
1Download the Software Instruction Manuals (PDF files).
Connect to the Internet and access the following Canon Web site.
www.canon.com/icpd
2View the Software Instruction Manuals (PDF files).
Double-click a downloaded Instruction Manual (PDF file) to open
it.
To view the Instruction Manuals (PDF files), Adobe Acrobat
Reader DC or other Adobe PDF viewer (most recent version
recommended) is required.
Adobe Acrobat Reader DC can be downloaded for free from the
Internet.
To learn how to use PDF viewing software, refer to the software’s
Help section.
Downloading and Viewing the Software
Instruction Manuals (PDF Files)
447
You can use EOS software to download images from the camera to a
computer. There are two ways to do this.
1Install the software (p.445).
2Use an interface cable (sold
separately) to connect the camera
to the computer.
Connect the cable to the camera’s
digital terminal with the cable plug’s
<D> icon facing the front of the
camera.
Connect the cord’s plug to the
computer’s USB terminal.
3Use EOS Utility to transfer the
images.
Refer to the EOS Utility Instruction
Manual.
Downloading Images to a Computer
Downloading by Connecting the Camera to the Computer
When a Wi-Fi connection is established, the camera cannot be connected to
a computer with an interface cable.
Downloading Images to a Computer
448
You can use a card reader to download images to a computer.
1Install the software (p.445).
2Insert the card into the card
reader.
3Use Digital Photo Professional to
download the images.
Refer to the Digital Photo
Professional Instruction Manual.
Downloading Images with a Card Reader
When downloading images from the camera to a computer with a card
reader without using EOS software, copy the DCIM folder on the card to the
computer.
449
Numerics
10- or 2-sec. self-timer ..................125
1280x720 (movie) .........................245
1920x1080 (movie) .......................245
640x480 (movie) ...........................245
9-point AF auto selection ..............119
A
A (Scene Intelligent Auto)............72
AC adapter....................................381
Access lamp....................................40
Accessories.......................................3
Adobe RGB...................................159
AE lock..........................................178
AEB
(Auto Exposure Bracketing)..176, 366
AF
AF-assist beam.................117, 368
AF method ........................214, 274
AF operation .....................114, 211
Beeper ......................................287
Difficult subjects for AF .....121, 221
Manual focusing (MF).......122, 228
Out of focus ................50, 121, 221
Recomposing..............................75
AF point.........................................119
AI FOCUS (AI Focus AF)..............116
AI SERVO (AI Servo AF) ........75, 116
ALL-I .........................................8, 254
Ambience-based shots ...................82
Angle of view...................................49
Aperture-priority AE ......................166
Art bold effect ....................... 207, 358
Aspect ratio .................................. 210
Attenuator..................................... 272
Auto Lighting Optimizer ................ 149
Auto playback............................... 330
Auto power off ........................ 42, 288
Auto reset ..................................... 293
Autofocus 9 AF
Automatic selection of AF point.... 119
Av (Aperture-priority AE) .............. 166
B
Background blur ............................. 80
Background music........................ 332
Basic Zone modes.......................... 30
Battery ................................ 36, 38, 43
Beep (Beeper).............................. 287
Black-and-white images . 82, 136, 140
Bluetooth function................. 382, 407
Bracketing ............................ 148, 176
Built-in flash.................................. 182
BULB (bulb exposure) .................. 171
C
C (Creative Auto) ......................... 78
Cable ............................ 333, 401, 447
Camera
Camera vibration blur............... 179
Clearing the camera settings to
default ...................................... 298
Holding the camera.................... 50
Candlelight ..................................... 94
Index
450
Index
Cards .............................. 8, 27, 38, 68
Formatting ..................................68
Low-level formatting ...................69
Troubleshooting....................40, 69
Write-protect switch.................... 38
Center-weighted average
metering........................................173
Charger.....................................34, 36
Chromatic aberration correction ...155
Cleaning (image sensor).......302, 306
Clearing the camera settings to
default ........................................... 298
Clipped highlights .........................353
Close-ups........................................92
Color space...................................159
Color temperature......................... 143
Color tone ......................... 93, 94, 139
Continuous (file numbering)..........292
Continuous shooting ..................... 123
Contrast ........................................139
Copyright information....................295
Creative Auto ..................................78
Creative filters.......100, 205, 250, 356
Creative filters for movies .............250
Dream....................................... 251
Old Movies ...............................251
Memory ....................................252
Dramatic B&W.......................... 252
Miniature effect movie ..............252
Creative Zone modes .....................31
Cropping (images) ........................361
Custom Functions ........................ 364
Custom White Balance................. 145
D
Date/time ........................................ 44
Daylight saving time ....................... 46
DC Coupler .................................. 381
Default settings ............................ 298
Depth-of-field preview .................. 168
Dial ......................................... 28, 161
Diffraction correction .................... 156
Digital terminal ............................... 29
Dioptric adjustment ........................ 50
DISP button.............. 28, 70, 288, 301
Display level ................................... 52
Distortion correction ..................... 155
DPOF
(Digital Print Order Format) .......... 342
Dragging......................................... 66
Drive mode....................... 32, 81, 123
Dust Delete Data.......................... 304
E
Erasing images ............................ 339
Err (error codes)........................... 427
Evaluative metering...................... 172
exFAT ..................................... 69, 247
Exposure compensation............... 174
Exposure level increments ........... 366
Exposure level indicator ................. 33
External Speedlite 9 Flash
451
Index
Eyecup ..........................................386
Eye-Fi cards..................................387
Eyepiece cover .......................35, 386
F
FE lock ..........................................185
Feature guide..................................56
FEB (Flash exposure bracketing) .192
File extension................................294
File name ......................................292
File size.........................129, 246, 350
Filter effects ..........................137, 140
Final image simulation ..........202, 241
Fine (image-recording quality) ........32
Firmware .......................................409
First-curtain synchronization .........193
Fish-eye effect ..............102, 207, 357
Flash (Speedlite)
Built-in flash ..............................182
Custom Functions.....................194
Effective range..........................182
External flash units ...................187
FE lock......................................185
Flash control
(function settings) .....................189
Flash exposure compensation..184
Flash mode.......................192, 193
Flash off......................77, 107, 108
Flash sync contacts ....................28
Flash sync speed......................188
Manual flash .............................193
Red-eye reduction ....................183
Shutter synchronization
(1st/2nd curtain) ....................... 193
Focus indicator ............................... 72
Focus lock ...................................... 75
Focus mode switch......... 48, 122, 228
Focusing 9 AF
Folder creation/selection .............. 290
Food ............................................... 93
Formatting (card initialization) ........ 68
Frame rate.................................... 245
Full High-Definition (Full HD)
(movie) ................................. 233, 245
Functions available by
shooting mode.............................. 390
G
Geotagging images ...................... 282
GPS.............................................. 408
Grainy B/W ................... 102, 207, 357
Grid display .......................... 209, 275
Group Photo ................................... 88
H
Handheld Night Scene ................... 96
HD (movie) ................................... 245
HDMI ............................................ 324
HDMI CEC.................................... 334
HDR art bold................................. 104
HDR art embossed....................... 104
HDR art standard ......................... 103
HDR art vivid ................................ 103
HDR Backlight Control ................... 97
452
Index
HDR movie ...................................249
High ISO speed noise reduction...150
Highlight alert................................353
Highlight tone priority ....................367
Histogram (Brightness/RGB) ........ 353
Hot shoe ................................. 28, 187
Household power..........................381
I
ICC profile..................................... 159
Image dust prevention .................. 302
Image review time......................... 288
Image-recording quality ................128
Images
AF point display........................349
Auto playback...........................330
Auto rotation .............................297
Erasing .....................................339
File numbering.......................... 292
Highlight alert ...........................353
Histogram .................................353
Index display ............................310
Jump display
(image browsing)......................311
Magnifying images ...................313
Manual rotation.........................316
Playback ........................... 110, 309
Protecting .................................336
Rating .......................................317
Review time..............................288
Search conditions.....................320
Shooting information ................349
Slide show ................................ 330
Viewing on a TV set .........324, 333
Index display ................................ 310
INFO button.................. 110, 199, 240
IPB (Light) .................................... 246
IPB (Standard).............................. 246
ISO speed .................... 132, 236, 239
Automatic setting (ISO Auto) ... 133
ISO expansion ......................... 366
Maximum limit setting for
ISO Auto .................................. 134
J
JPEG............................................ 129
Jump display ................................ 311
K
Kids ................................................ 91
L
Landscape.............................. 89, 136
Language ....................................... 47
Large (image-recording
quality)............................ 32, 128, 359
LCD monitor ............................. 26, 41
Adjusting angle .................... 41, 76
Brightness adjustment ............. 289
Image playback................ 110, 309
Menu display...................... 60, 402
Lens ......................................... 27, 48
Chromatic aberration
correction ................................. 155
Diffraction correction ................ 156
Distortion correction................. 155
Lock release .............................. 49
Peripheral illumination
correction ................................. 153
453
Index
Live View shooting ..................76, 195
AF operation .............................211
Aspect ratio...............................210
Creative filters...........................205
Face+Tracking..........................215
Grid display...............................209
Information display ...................199
Live 1-point AF .........................219
Manual focusing (MF)...............228
Metering timer...........................209
Possible shots ..........................197
Quick Control............................203
Smooth zone ............................217
Long (bulb) exposures ..................171
Long exposure noise reduction.....151
M
M (Manual exposure)....................169
Macro photography .........................92
Magnifying images................228, 313
Manual exposure ..................169, 238
Manual focusing (MF) ...........122, 228
Manual reset .................................294
Manual selection (AF point) ..........119
Maximum burst .....................129, 130
Medium (image-recording
quality) ............................32, 128, 359
Memory cards 9 Cards
Menu ...............................................60
Display level ...............................52
My Menu...................................373
Setting procedure .......................61
Settings.....................................402
Menu display .................................. 54
3 icon....................................... 15
Metering mode ............................. 172
Metering timer ...................... 209, 274
MF (Manual focusing)........... 122, 228
Microphone................................... 234
Miniature effect............. 103, 208, 358
Miniature effect movies ................ 252
Mirror lockup......................... 179, 369
Mode Dial ....................................... 30
Monochrome images...... 82, 136, 140
MOV ............................................. 254
Movies .......................................... 233
AE lock..................................... 178
AF method ....................... 244, 274
Attenuator ................................ 272
Autoexposure........................... 234
Compression method............... 246
Creative filters .......................... 250
Editing ...................................... 328
Editing out first and
last scenes ............................... 328
Enjoying movies ....................... 324
External microphone ................ 271
File size.................................... 246
Frame rate ............................... 245
Grid display .............................. 275
HDR movie shooting ................ 249
Information display................... 240
Manual exposure ..................... 238
Metering timer .......................... 274
Microphone ...................... 234, 271
Movie digital zoom ................... 248
454
Index
Movie recording size ................ 245
Movie Servo AF........................ 273
Playback ........................... 324, 326
Quick Control............................244
Recording time .........................246
Sound recording.......................271
Time-lapse movie .....................254
Video snapshot album ..............261
Video snapshots .......................261
Viewing on a TV set .........324, 333
Wind filter .................................272
MP4 .............................................. 245
Multi Shot Noise Reduction ..........150
My Menu .......................................373
N
NFC ..............................................407
Night Portrait...................................95
Night scenes .............................95, 96
Noise reduction
High ISO speed ........................ 150
Long exposures........................151
Nomenclature .................................28
Non-Canon flash units ..................188
Normal (Image-recording quality) ...32
NTSC .................................... 245, 408
O
ONE SHOT (One-Shot AF)...115, 212
P
P (Program AE) ............................162
PAL .......................................245, 408
Partial metering.............................172
Peripheral illumination correction. 153
Photobook set-up......................... 346
Picture Style ................. 135, 138, 141
Pixel count.................................... 128
Playback............................... 110, 309
Portrait.................................... 87, 136
Possible recording time (movie)... 246
Possible shots ................ 43, 129, 197
Power
Auto power off.......................... 288
Battery information................... 380
Battery level ....................... 43, 380
Charging .................................... 36
Household power..................... 381
Possible shots............ 43, 129, 197
Recharge performance ............ 380
Pressing completely ....................... 51
Pressing halfway ............................ 51
Print order (DPOF) ....................... 342
Program AE.................................. 162
Program shift ................................ 163
Protecting images ........................ 336
Q
Q (Quick
Control) .......... 58, 106, 203, 244, 322
R
Rating........................................... 317
Rating mark.................................. 317
RAW ....................... 32, 128, 129, 131
RAW+JPEG ................. 128, 129, 131
Recharging..................................... 36
455
Index
Red-eye reduction.........................183
Reduced display ...........................310
Release shutter without card ........287
Remote control shooting ...............382
Remote switch ..............................385
Resizing ........................................359
Rotation (image) ...................297, 316
S
Saturation......................................139
Scene icons ..........................201, 237
Scene Intelligent Auto.....................72
SD, SDHC, SDXC cards 9 Cards
Second-curtain synchronization....193
Self portrait....................................226
Self-timer.......................................125
Sensitivity 9 ISO speed
Sensor cleaning ....................302, 306
Sepia (Monochrome) ..............82, 140
Servo AF
AI Servo (AI Servo AF) .............116
Movie Servo AF ........................273
Servo (Servo AF)......................213
Sharpness.....................................139
Shooting information .....................349
Shooting mode guide......................55
Shooting modes..............................30
Av (Aperture-priority AE) ..........166
M (Manual exposure)................169
P (Program AE) ........................162
Tv (Shutter-priority AE).............164
A (Scene Intelligent Auto) .......72
7 (Flash Off) ............................ 77
C (Creative Auto)..................... 78
8 (Special scene).................. 85
2 (Portrait)............................ 87
q (Group Photo) .................. 88
3 (Landscape) .................... 89
5 (Sports)............................ 90
C (Kids) ................................ 91
4 (Close-up) ......................... 92
P (Food)................................ 93
x (Candlelight) ..................... 94
6 (Night Portrait) .................. 95
F (Handheld Night Scene) ... 96
G (HDR Backlight Control)... 97
v (Creative filters) .................. 100
G (Grainy B/W)................... 102
W (Soft focus) ..................... 102
X (Fish-eye effect).............. 102
Z (Water painting effect) .... 103
H (Toy camera effect) ........ 103
c (Miniature effect)............. 103
A (HDR art standard) ....... 103
B (HDR art vivid) .............. 103
C (HDR art bold) .............. 104
D (HDR art embossed)..... 104
Shooting screen ............................. 52
Shooting tips................................... 57
Shutter button................................. 51
Shutter synchronization................ 193
Shutter-priority AE ........................ 164
Single shooting............................. 123
Single-image display .................... 110
Single-point AF............................. 119
Slide show .................................... 330
456
Index
Small (image-recording
quality) ............................32, 128, 359
Smooth zone.................................217
Soft focus......................102, 207, 357
Software........................................444
Sound-recording level................... 272
Speaker.........................................326
Special scene mode (SCN).............85
Sports.............................................. 90
Spot metering................................172
sRGB ............................................ 159
O icon............................................ 15
Stop down aperture.......................168
Strap ............................................... 35
System map..................................400
T
Temperature warning ............230, 278
Time zone ....................................... 44
Time-lapse movie..........................254
Tone priority ..................................367
Toning effect (monochrome) .........140
Touch beeping ..............................287
Touch operation ..............................65
Touch screen ..........................65, 314
Touch Shutter................................ 224
Toy camera effect .........103, 208, 358
Tripod socket ..................................29
Troubleshooting guide .................. 412
Tv (Shutter-priority AE) .................164
U
USB (digital) terminal ................... 447
V
Vari-angle LCD monitor ............ 41, 76
Vertical image auto rotation.......... 297
Video snapshot album.................. 261
Video snapshots........................... 261
Video system................ 245, 333, 408
Viewfinder ...................................... 33
Dioptric adjustment .................... 50
Viewing on a TV set ............. 324, 333
Volume (movie playback) ............. 327
W
Warning icon ................................ 369
Water painting effect .... 103, 207, 358
White balance (WB) ..................... 143
Ambience priority (Q)............ 144
Bracketing................................ 148
Correction ................................ 147
Custom .................................... 145
White priority (Qw)................ 144
Wi-Fi............................................. 407
Wind filter ..................................... 272
Wireless communication
settings......................................... 407
CPH-E503-000 © CANON INC. 2017
The descriptions in this Instruction Manual are current as of March 2017. For
information on the compatibility with any products introduced after this date,
contact any Canon Service Center. For the latest version Instruction Manual,
refer to the Canon Web site.