Table of Contents
- Dell Latitude 5420 Rugged Setup and Specifications Guide
- Chassis Overview
- Hot key definition
- Technical specifications
- Processor
- Memory
- Base
- System information
- System board connectors
- Storage
- Audio
- Graphics Specifications
- Camera
- Communication
- External Ports and connectors
- Media card-reader
- Smart card reader
- Hardware and Software Security
- Display
- Keyboard
- Touchpad
- Battery
- Power adapter
- Physical system dimensions
- Computer environment
- Regulatory and Environmental Compliance
- Operating system
- System setup
- Software
- Getting help
DELL 5420 User Manual
Displayed below is the user manual for 5420 by DELL which is a product in the Notebooks category. This manual has pages.
Related Manuals
Dell Latitude 5420 Rugged
Setup and Specifications Guide
Regulatory Model: P85G
Regulatory Type: P85G001
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2018 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its
subsidiaries. Other trademarks may be trademarks of their respective owners.
2019 - 05
Rev. A01
1 Chassis Overview......................................................................................................................... 5
Front View.............................................................................................................................................................................. 6
Left Side View........................................................................................................................................................................6
Right Side View...................................................................................................................................................................... 7
Bottom View...........................................................................................................................................................................7
Top view................................................................................................................................................................................. 8
Back View............................................................................................................................................................................... 9
2 Hot key definition....................................................................................................................... 10
3 Technical specifications.............................................................................................................. 12
Processor.............................................................................................................................................................................. 12
Memory................................................................................................................................................................................. 13
Base....................................................................................................................................................................................... 13
System information..............................................................................................................................................................13
System board connectors................................................................................................................................................... 14
Storage.................................................................................................................................................................................. 14
Audio...................................................................................................................................................................................... 14
Graphics Specifications....................................................................................................................................................... 14
Camera.................................................................................................................................................................................. 15
Communication.....................................................................................................................................................................15
External Ports and connectors...........................................................................................................................................16
Media card-reader................................................................................................................................................................16
Smart card reader................................................................................................................................................................ 16
Hardware and Software Security.......................................................................................................................................17
Display....................................................................................................................................................................................17
Keyboard............................................................................................................................................................................... 18
Touchpad...............................................................................................................................................................................18
Battery...................................................................................................................................................................................19
Power adapter...................................................................................................................................................................... 19
Physical system dimensions............................................................................................................................................... 20
Computer environment.......................................................................................................................................................20
Regulatory and Environmental Compliance..................................................................................................................... 20
Operating system................................................................................................................................................................. 21
4 System setup.............................................................................................................................22
Boot menu............................................................................................................................................................................ 22
Navigation keys....................................................................................................................................................................22
System setup options......................................................................................................................................................... 23
General options.............................................................................................................................................................. 23
System configuration.................................................................................................................................................... 24
Video screen options.....................................................................................................................................................26
Security...........................................................................................................................................................................26
Secure boot....................................................................................................................................................................28
Contents
Contents 3
Intel Software Guard Extensions options................................................................................................................... 28
Performance...................................................................................................................................................................29
Power management...................................................................................................................................................... 29
Post behavior.................................................................................................................................................................. 31
Manageability................................................................................................................................................................. 32
Virtualization support.................................................................................................................................................... 32
Wireless options.............................................................................................................................................................33
Maintenance...................................................................................................................................................................33
System logs.................................................................................................................................................................... 34
About...............................................................................................................................................................................34
Boot Sequence.................................................................................................................................................................... 34
Updating the BIOS in Windows ........................................................................................................................................ 35
Updating BIOS on systems with BitLocker enabled................................................................................................. 35
Updating your system BIOS using a USB flash drive................................................................................................35
Updating the Dell BIOS in Linux and Ubuntu environments.....................................................................................36
System and setup password..............................................................................................................................................36
Assigning a system setup password........................................................................................................................... 36
Deleting or changing an existing system setup password........................................................................................37
5 Software................................................................................................................................... 38
Operating system................................................................................................................................................................ 38
Downloading drivers............................................................................................................................................................38
6 Getting help...............................................................................................................................39
Contacting Dell.................................................................................................................................................................... 39
4Contents
Front View
1. Camera Shutter 2. RGB Camera
3. RGB Camera status LED 4. IR Camera
5. IR Emitter 6. IR Camera status LED
7. Handle 8. Speakers
9. LCD Latch 10. Microphone array
11. Battery Status LED
Left Side View
1. USB 3.1 Gen 2 Type-C Port with Power Delivery(PD) 2. Smart Card Reader
3. USB 3.1 Gen 1 Type-A Port(with PowerShare) 4. USB 3.1 Gen 1 Type-A Port
5. 3.5 mm Universal audio port
6 Chassis Overview
Right Side View
1. SSD 2. SD Card Reader
3. SIM Card Slot 4. USB 3.1 Gen 1 Type-A Port (recessed USB, supports mini USB
connection with doors shut)
5. Stylus slot
Bottom View
1. Radio frequency pass-through connectors 2. Docking port
3. Service tag sticker 4. Battery -1
5. Battery -1 Latch 6. Battery -1 charge indicator LED
7. Battery -1 charge indicator button 8. Battery -2 charge indicator button
9. Battery -2 charge indicator LED 10. Handle
11. Battery -2 Latch 12. Battery -2 (Optional)
Chassis Overview 7
Top view
1. Power button 2. Keyboard
3. Touch pad 4. Fingerprint reader (optional)
8 Chassis Overview
Back View
1. Ethernet Port (Optional Rear configurable I/O) 2. VGA Port (Optional Rear configurable I/O)
3. Serial Port 4. Ethernet Port Port
5. HDMI 2.0 Port 6. T-Bar Lock Slot
7. DC-In(Power) Port
CAUTION: EXPLOSION HAZARD—External connections (power adapter port, HDMI port, USB ports, RJ45 port, serial
ports, audio port, Smart Card reader slot, SD card reader slot, Express Card reader slot, PC card reader slot, SIM card
slot) should not to be used in a hazardous location.
WARNING: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your Dell computer
in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow can damage the
computer. The computer turns on the fan when the computer gets hot. Fan noise is normal and does not indicate a
problem with the fan or the computer.
Chassis Overview 9
Hot key definition
Fn behavior: Primary behavior is media key; Secondary behavior is F1-F12 key.
• Fn Lock only switches primary and secondary behavior on F1-F12.
• F7 is stealth –unique for rugged and semi rugged platforms. It turns off LCD, all wireless, all alerts, indicator lights, sound, fan, etc
Table 1. Keyboard shortcuts
Hot keys Function Description
Fn+ESC Fn Lock Allows the user to toggle between
locked and unlocked Fn keys.
Fn+F1 Audio Volume Mute Temporarily mutes/unmutes the
audio. The audio level before muting
is returned after unmuting.
Fn+F2 Audio Volume Down/Decrease Decreases the audio volume until
minimum/off is reached.
Fn+F3 Audio Volume Up/Increase Increases the audio volume until
maximum is reached.
Fn+F4 Microphone Mute Silences the on-board microphone so
it cannot record audio. There is an
LED on the F4 function key that
notifies the user of the state of this
feature:
• LED off = microphone capable of
recording audio
• LED on = microphone muted and
unable to record audio
Fn+F5 Num lock Allows the user to toggle between
locked and unlocked NumLock
Fn+F6 Scroll lock Used as Scroll Lock key.
Fn+F7 Stealth Mode Allows the user to toggle to and from
Stealth Mode
Fn+F8 LCD and Projector display Determines video output to LCD and
external Video devices when
attached and displays present.
Fn+F9 Search Mimics the Windows key + F
keystroke to open Windows Search
dialog box.
Fn+F10 KB Illumination/Backlight Determines the Keyboard
Illumination/Backlight brightness
level. The hot key cycles through the
following brightness states when
pressed: Disabled, Dim, Bright. For
more detail, see Keyboard
Illumination/Backlight section.
Fn+F11 Brightness Decrease Decreases the stepping of LCD
brightness for each press until
2
10 Hot key definition
Hot keys Function Description
minimum is reached. For details, see
the LCD Brightness section.
Fn+F12 Brightness Increase Increases the stepping of LCD
brightness for each press until
maximum is reached. For details, see
the LCD Brightness section.
Fn+PrintScreen Radio On/Off Toggles all the wireless radios on and
off. For example, WLAN, WWAN, and
Bluetooth.
Fn+Insert Sleep Puts the system into the ACPI S3
State and does not wake the system.
Traditional programming functions like Scroll Lock are assigned to alpha keys with un-printed legends.
•Fn+S = Scroll Lock
•Fn+B = Pause
•Fn+Ctrl+B = Break
•Fn+R = Sys-Req
NOTE: For non-backlit keyboards F10 has no function and icon on function key is purged.
Hot key definition 11
Technical specifications
NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your
computer. For more information about the configuration of your computer, go to Help and Support in your Windows
operating system and select the option to view information about your computer.
Topics:
•Processor
•Memory
•Base
•System information
•System board connectors
•Storage
•Audio
•Graphics Specifications
•Camera
•Communication
•External Ports and connectors
•Media card-reader
•Smart card reader
•Hardware and Software Security
•Display
•Keyboard
•Touchpad
•Battery
•Power adapter
•Physical system dimensions
•Computer environment
•Regulatory and Environmental Compliance
•Operating system
Processor
NOTE: Processor numbers are not a measure of performance. Processor availability is subject to change and may vary
by region/country.
Table 2. Processor specifications
Type UMA Graphics
Intel Dual-Core i3-7130U Kaby Lake processor, Cache: 3 MB / # of
Thread (T): 4 / Base Frequency : 2.7 GHz / Thermal Design Power
(TDP): 15 W)
Intel HD Graphics 620
Intel Quad-Core i5-8350U Kaby Lake processor (6 MB / 8T / 1.7
GHz / 15 W)
Intel UHD Graphics 620
Intel Quad-Core i7-8650U Kaby Lake processor (8 MB / 8T / 1.9
GHz / 15 W)
Intel UHD Graphics 620
Intel Dual-Core i5-6300U Sky Lake processor (3MB / 4T / 2.4
Ghz / 15 W)
Intel HD Graphics 520
3
12 Technical specifications
Memory
Table 3. Memory specifications
Memory configuration
Minimum memory configuration 4 GB
Maximum memory configuration 32 GB
Number of slots Two DDR4 SODIMM slots
Maximum memory supported per slot 16 GB
Memory options • 8 GB - 2 x 4 GB/ 1 x 8 GB
• 16 GB - 2 x 8 GB
• 32 GB - 2 x 16 GB
Type DDR4 SDRAM (Non-ECC memory only)
Speed • 2400 MHz (Kaby Lake processor)
• 2133 MHz (Sky Lake procesor)
Base
Table 4. Base configurations
Base
• Intel Dual-Core i3-7130U Kaby Lake processor, Intel HD 620 UMA graphics, TPM
• Intel Quad-Core i5-8350U Kaby Lake processor, Intel UHD 620 UMA graphics, TPM, vPro
• Intel Quad-Core i5-8350U Kaby Lake processor, AMD Radeon 540(2GB/64-Bit) discrete graphics, TPM, vPro
• Intel Quad-Core i5-8350U Kaby Lake processor, AMD Radeon RX540(4GB/128-Bit) discrete graphics, TPM, vPro
• Intel Quad-Core i7-8650U Kaby Lake processor, AMD Radeon 540(2GB/64-Bit) discrete graphics, TPM, vPro
• Intel Quad-Core i7-8650U Kaby Lake processor, AMD Radeon RX540(4GB/128-Bit) discrete graphics, TPM, vPro
• Intel Dual-Core i5-6300U Sky Lake processor, Intel HD 520 UMA graphics, TPM
System information
Table 5. System Information
System chipset information
Chipset • Intel Kaby Lake U Dual Core (integrated with processor)
• Intel Kaby Lake U Quad Core(integrated with processor)
• Intel Sky Lake U Dual Core (integrated with processor)
DRAM bus width 64-bit
Flash EEPROM SP1 128 Mbits
PCIe bus 100 Mhz
External bus frequency DMI 3.0-8GT/s
Technical specifications 13
System board connectors
Table 6. Internal M.2 System board connectors
Sockets Options
M.2 (Socket 1, Key A) Wireless Local Area Network (WLAN) / Wireless Gigabit Alliance
(WiGig)
M.2 (Socket 3, Key M) SATA / PCIe x2 or PCIe x4 SSD
M.2 (Socket 2, Key B) SSD / Wireless Wide Area Network (WWAN)
Storage
Table 7. Storage specifications
Type Form factor Interface Security option Capacity
( SSD, FIPS, SED, Opal) M.2 2280 SSD PCIe x4 FIPS, SED, Opal • 128 GB
• 256 GB
• 512 GB
• 1 TB
• 2 TB
• 256 GB / 512GB FIPS
140-2 compliant SED
• 1TB OPAL SED
Audio
Table 8. Audio specifications
Controller ALC3254
Type Mono-channel
Speakers One
Interface • Universal Stereo headset/mic combo
• Rugged quality speakers
• Noise reducing array microphones
Internal speaker amplifier 2 W (RMS)
Graphics Specifications
Table 9. Graphics specifications
Controller Type CPU
Dependency
Graphics
memory type
Capacity External display
support
Maximum
resolution
Intel HD 620
Graphics
UMA Intel Core i3 -
7130U
Integrated Shared system
memory
HDMI 2.0 4096×2304 @60 Hz
Intel UHD 620
Graphics
UMA Intel Core i5 -
8350U
Integrated Shared system
memory
HDMI 2.0 4096×2304 @60 Hz
14 Technical specifications
Controller Type CPU
Dependency
Graphics
memory type
Capacity External display
support
Maximum
resolution
Intel HD 520
Graphics
UMA Intel Core
i5-6300U
Integrated Shared system
memory
HDMI 2.0 4096×2304 @60 Hz
AMD Radeon
540
Discrete Intel Core i5 -
8350U
Intel Core i7 -
8650U
Discrete Dedicated, 2 GB
DDR5
HDMI 2.0
Additional video
ports via Rear
Configurable IO
Space
• VGA
• DisplayPort
4096×2304 @60 Hz
AMD Radeon
RX540
Discrete Intel Core i5 -
8350U
Intel Core i7 -
8650U
Discrete Dedicated, 4 GB
DDR5
HDMI 2.0
Additional video
ports via Rear
Configurable IO
Space
• VGA
• DisplayPort
4096×2304 @60 Hz
NOTE: Additional video ports via Rear Configurable IO Space is available with discrete graphics solution only.
Camera
Table 10. Camera specifications
Resolution Camera:
• Still image: 0.92 megapixels
• Video: 1280x720 at 30 fps
Infrared camera (optional):
• Still image: 0.30 megapixels
• Video: 340x340 at 60 fps
Diagonal viewing angle • Camera - 86.7 degrees
• Infrared camera - 70 degrees
Communication
Table 11. Communication specifications
Network Adapter Specifications
Ethernet Integrated Intel i219LM 10/100/1000 Mb/s Ethernet (RJ-45 ) with
Intel Remote Wake UP, PXE and Jumbo frames support. (2nd NIC
in rear configurable IO space)
Wireless LAN(Optional) • Intel Dual Band Wireless AC 8265 (802.11ac) 2x2 + Bluetooth
4.2
• Intel Dual Band Wireless AC 8265 (802.11ac) 2x2 (No BT)
• Dell Wireless 1820 - 802.11a/b/g/n/ac Dual Band (2x2) WiFi +
Bluetooth 4.2
Wireless WAN(Optional) Qualcomm Snapdragon X20 Global Gigabit LTE
Technical specifications 15
Network Adapter Specifications
Global Positioning System(GPS) Module (Optional) U-blox NEO-M8 dedicated GPS card
External Ports and connectors
Table 12. External Ports and connectors
Ports Specifications
USB • One USB 3.1 Gen 1 Type-A port with Power on/Wake-up
support
• Two USB 3.1 Gen 1 Type-A port
• One USB 3.2 Gen 1 Type-C port with PowerShare
Security T-Bar Slot
Docking port • USB Type-C Monitor Stand/Dock
• Latitude USB Type-C Dock
• Dell Rugged Family Pogo Dock (backward compatible with Gen
2)
Audio • Universal audio jack (Global Headset Jack + mic phone in + line
in support)
• No / Noise reduction dual array microphones
Video • HDMI 2.0
Network adapter One RJ-45 connector
Serial port One legacy Serial RS-232 port
Rear Configurable I/O Space • Blank - no IO, blank bezel (FACTORY DEFAULT)
• 2nd Gigabit RJ-45 + 2nd RS-232
• 2nd Gigabit RJ-45 + VGA OUT
• 2nd Gigabit RJ-45 + DisplayPort Out (full-size)
SIM card reader One micro SIM card reader
Media card-reader
Table 13. Media-card reader specifications
SD card reader specifications
Type One SD-card slot
Supported cards • SD
• SDHC
• SDXC
Smart card reader
Table 14. Contactless smart card reader
Type FIPS 201 Contacted / Contactless Smart Card reader
ISO certification ISO14443A
16 Technical specifications
Hardware and Software Security
Table 15. Hardware Security
Hardware Security
TPM 2.0 FIPS 140-2 Certified, TCG Certified*
* TCG certification (February 2018)
Yes,
Discrete TPM 2.0 IC ( Backward downgradable to 1.2)
BIOS disable TPM (China/Russia) Yes
Optional Control Vault 2.0 Advanced Authentication with FIPS
140-2 level 3 certification (HW authentication configurations)
Yes, TCG Certified (February 2018)
Optional hardware authentication bundle 2:
• FIPS 201 contacted smart card
• Control Vault 2.0
Yes
Optional hardware authentication bundle 4:
• Touch finger print reader
• FIPS 201 contacted smart card
• Contactless smart card
• NFC
• Control Vault 2.0
Yes
• Synaptics Fingerprint reader
• Synaptics Smart Card Reader + Contactless Smart Card
Security lock slot (Kensington T-Bar Lock Slot) Yes
SED (Opal 2.0 - SATA Interface) Yes
Statement of Non-Volatility Yes
Bundle 6 Control Vault 2 and touch fingerprint Yes
POA: Power On Authentication Yes(Supported with Fingerprint reader only)
Table 16. Software Security
Software security
Latitude Security software per software functional plan/cycle list Yes
D-Pedigree for BIOS (Secure Supply Chain Functionality) provides:
• Secure Supply Chain for a Product covers BIOS Image Integrity
• Chain of Custody
• Part Traceability
Yes
Display
Table 17. Display specifications
Type Full HD Touch/Non-Touch
Screen size (Diagonal) 14 inch (16:9)
LCD Panel technology FHD (1920x1080)
Display Non Touch / Touch (10 finger PCAP Glove/Water/Stylus capable)
Native Resolution 1920x1080
High Definition Yes
Luminance Standard Brightness (SB):220 NIT / Outdoor Viewable(OV) :1000
NIT
Technical specifications 17
Height 173.95 mm / 6.85 (display area)
Width 309.4 mm / 12.18 inch
Megapixels 2.07
Pixels Per Inch (PPI) 157
Pixel pitch 0.161 mm
Color depth 16.2M colors (OV) / 262K (SB)
Contrast ratio (typical) 1500 (OV) / 700 (SB)
Response time(max) 35 ms
Refresh rate 60 Hhz
Horizontal viewing angle 85/85°
Vertical viewing angle 85/85°
Stylus support Yes, Passive
Keyboard
Table 18. Keyboard specifications
Number of keys • 83 keys: US English, Thai, French-Canadian, Korean, Russian,
Hebrew, English-International
• 84 keys: UK English, French Canadian Quebec, German,
French, Spanish (Latin America), Nordic, Arabic, Canada
Bilingual
• 85 keys: Brazilian Portuguese
• 87 keys: Japanese
Size Six row keyboard
• X= 19.05 mm key pitch
• Y= 19.05 mm key pitch
Backlit keyboard None / RGB Backlight / Rubberized Sealed
Layout QWERTY / AZERTY / Kanji
Touchpad
Table 19. Touchpad Specifications
Resolution • Horizontal: 305
• Vertical: 305
Dimensions • Width: 4.13 inch (105 mm )
• Height: 2.36 inch (60 mm)
Multi-touch Supports four - fingers multi-touch
18 Technical specifications
Battery
Table 20. Battery Specifications
Type • 3-cell 51 Whr (ExpressCharge)
• 3-cell 51 Whr (Long-Life Cycle, includes 3 year limited
warranty)
Dimension • Length: 128.4 mm (5.05 inch)
• Width: 86.3 mm (3.39 inch)
• Height: 15.3 mm (0.60 inch)
Weight (maximum) 237.00 g (0.52 lb)
Voltage 51 WHr - 11.4 VDC
Life Span 300 discharge/recharge cycles
Charging time when the computer is off (approximate) 2 hours(with one battery) / 4 hours (with two batteries)
Operating time Varies depending on operating conditions and can significantly
reduce under certain power-intensive conditions.
Temperature range: Operating 0°C to 60°C (32°F to 140°F)
Temperature range: Non-Operating -40°C to 70°C (-40°F to 158°F)
Coin-Cell battery 3 V, CR2032, lithium ion
Power adapter
Table 21. Power adapter specifications
Type • 19.5 V @ 130 W & 90 W adapters through 7.4 mm Normal and
Elbow Barrel
• USB Type-C with PD (Power Distribution)
• Via Dock supporting a NVDC charger architecture
Input Voltage 100 VAC to 240 VAC
Input current (maximum) • 90 W - 1.5 A
• 130 W - 2.5 A
Adapter size 7.4 mm
Input frequency 50 Hz to 60 Hz
Output current • 90 W - 4.62 A (continuous)
• 130 W - 6.7 A (continuous)
Rated output voltage 19.5 VDC
Temperature range (Operating) 0ºC to 40ºC (32ºF to 104ºF)
Temperature range (Non-Operating) - 40ºC to 70ºC (-40ºF to 158º F)
Technical specifications 19
Physical system dimensions
Table 22. Weight
Chassis weight (pounds / kilograms) 4.9 / 2.2 (without handle and bumpers)
Table 23. Chassis dimensions
Dimensions Vectors
Height (inches / centimeters) 13.67 / 34.70
Width (inches / centimeters) 9.56 / 24.30
Depth (inches / centimeters) 1.29 / 3.28
Shipping weight (pounds / kilograms - includes packaging material) 7.5 / 3.40
Table 24. Packaging parameters
Dimensions Vectors
Height (inches / centimeters) 44.5 / 17.52
Width (inches / centimeters) 8.2 / 3.2
Depth (inches / centimeters) 34.1 / 13.42
Computer environment
Airborne contaminant level: G1 as defined by ISA-S71.04-1985
Table 25. Computer environment
Operating Storage
Temperature range -29°C to 60°C (-20.2°F to 140°F) -51°C to 71°C (-59.8°F to 159.8°F)
Relative humidity (maximum) 10% to 80% (non-condensing)
NOTE: Maximum dew point
temperature = 26°C
10% to 95% (non-condensing)
NOTE: Maximum dew point
temperature = 33°C
Vibration (maximum) 0.26 GRMS 1.37 GRMS
Shock (maximum) 105 G †40 G‡
Altitude (maximum) -15.2 m to 3048 m (-50 ft to 10,000 ft) -15.2 m to 10,668 m (-50 ft to 35,000 ft)
* Measured using a random vibration spectrum that simulates user environment.
† Measured using a 2 ms half-sine pulse when the hard drive is in use.
‡ Measured using a 2 ms half-sine pulse when the hard-drive head is in parked position.
Regulatory and Environmental Compliance
Table 26. Regulatory and Environmental Compliance specifications
• Energy Star Version 7¶
20 Technical specifications
• EPEAT Silver Registered*
• TAA configurations available
• MIL 810G
* : For specific country participation and rating, please see https://ww2.epeat.net/
¶ : Available on select configurations offered with single hard drive with both UMA and Discrete chipset.
Operating system
Table 27. Operating system
Operating System Supported
• Windows 10 Professional (64 bit)
• Windows Enterprise (64 bit)
• Windows 7 via Dell CFI ┼
• Ubuntu 18.04
NOTE: ┼ Supported on Intel Dual-Core i5-6300U SkyLake processor only.
Technical specifications 21
System setup
CAUTION: Unless you are an expert computer user, do not change the settings in the BIOS Setup program. Certain
changes can make your computer work incorrectly.
NOTE: Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen
information for future reference.
Use the BIOS Setup program for the following purposes:
• Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.
• Change the system configuration information.
• Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling base devices.
Topics:
•Boot menu
•Navigation keys
•System setup options
•Boot Sequence
•Updating the BIOS in Windows
•System and setup password
Boot menu
Press <F12> when the Dell logo appears to initiate a one-time boot menu with a list of the valid boot devices for the system. Diagnostics
and BIOS Setup options are also included in this menu. The devices listed on the boot menu depend on the bootable devices in the system.
This menu is useful when you are attempting to boot to a particular device or to bring up the diagnostics for the system. Using the boot
menu does not make any changes to the boot order stored in the BIOS.
The options are:
• UEFI Boot:
• Windows Boot Manager
•
• Other Options:
• BIOS Setup
• BIOS Flash Update
• Diagnostics
• Change Boot Mode Settings
Navigation keys
NOTE: For most of the System Setup options, changes that you make are recorded but do not take effect until you
restart the system.
Keys Navigation
Up arrow Moves to the previous field.
Down arrow Moves to the next field.
Enter Selects a value in the selected field (if applicable) or follow the link in the field.
Spacebar Expands or collapses a drop-down list, if applicable.
4
22 System setup
Keys Navigation
Tab Moves to the next focus area.
Esc Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a message
that prompts you to save any unsaved changes and restarts the system.
System setup options
NOTE: Depending on the and its installed devices, the items listed in this section may or may not appear.
General options
Table 28. General
Option Description
System Information This section lists the primary hardware features of your computer.
The options are:
•System Information
•Memory Configuration
•Processor Information
•Device Information
Battery Information Displays the battery status and the type of AC adapter connected
to the computer.
Boot Sequence Allows you to change the order in which the computer attempts to
find an operating system.
The options are:
•Windows Boot Manager
•Boot List Option:
Allows you to change the boot list options.
Click one of the following options:
•Legacy External Devices
•UEFI—Default
Advanced Boot Options Allows you to Enable Legacy Option ROMs.
The options are:
•Enable Legacy Option ROMs—Default
•Enable Attempt Legacy Boot
UEFI Boot Path Security Allows you to control whether the system prompts the user to
enter the Admin password when booting to a UEFI boot path.
Click one of the following options:
•Always, Except Internal HDD—Default
•Always
•Never
Date/Time Allows you to set the date and time. The change to the system
date and time takes effect immediately.
System setup 23
System configuration
Table 29. System Configuration
Option Description
Integrated NIC Allows you to configure the integrated network controller.
Click one of the following options:
•Disabled
•Enabled
•Enabled w/PXE—Default
Onboard Unmanaged NIC Allows you to enable / disable onboard USB LAN controller.
Serial Port 1 Allows you to configure(disable and re-mapping) the serial port(s).
Click one of the following options:
•Disabled
•Com1—Default (Port is configured with 3F8h with IRQ 4
•Com3 (Port is configured with 3E8h with IRQ 4
NOTE: Serial Port 2 is available when the system has
Serial Port in the rear configurable I/O space.
Serial Port 2
SATA Operation Allows you to configure the operating mode of the integrated SATA
hard-drive controller.
Click one of the following options:
•Disabled
•AHCI
•RAID On—Default
NOTE: SATA is configured to support RAID mode.
SMART Reporting This field controls whether hard drive errors for integrated drives
are reported during system startup. This technology is part of the
S.M.A.R.T (Self Monitoring Analysis and Reporting Technology)
specification. This option is disabled by default.
•Enable SMART Reporting
USB Configuration Allows you to enable or disable the internal/integrated USB
configuration.
The options are:
•Enable USB Boot Support
•Enable External USB Ports
•Disable Docking Station Devices except video (Default :
Unchecked)
Rest all the options are set by default.
NOTE: USB keyboard and mouse always work in the
BIOS setup irrespective of these settings.
USB PowerShare This field configures the USB PowerShare feature behavior. This
option allows you to charge external devices using the stored
system battery power through the USB PowerShare port (disabled
by default).
•Enable USB PowerShare
Audio Allows you to enable or disable the integrated audio controller. By
default, the Enable Audio option is selected.
24 System setup
Option Description
The options are:
•Enable Microphone
•Enable Internal Speaker
This option is set by default.
Keyboard Illumination This option lets you choose the operating mode of the keyboard
illumination feature
The options are:
•Disabled
•25%
•50%
•75%
•100%
Keyboard Backlight Timeout on AC Allows to define the timeout value for the keyboard backlight when
an AC adapter is plugged in the system. The Keyboard Backlight
tiemout value is only in effect when the backlight is enabled.
•5 seconds
•10 seconds—Default
•15 seconds
•30 seconds
•1 minute
•5 minutes
•15 minutes
•Never
Keyboard Backlight Timeout on Battery Allows to define the timeout value for the keyboard backlight when
the system is running only on battery power. The Keyboard
Backlight tiemout value is only in effect when the backlight is
enabled.
•5 seconds
•10 seconds—Default
•15 seconds
•30 seconds
•1 minute
•5 minutes
•15 minutes
•Never
RGB Keyboard Backlight This option allows to enable / select backlight color or configure
RGB intensity values to activate two custom backlight colors.
The options are:
•White
•Red
•Green
•Blue
•Custom1
•Custom2
Touchscreen This option controls whether the touchscreen is enabled or disabled
Stealth mode Control This option allows configuration of Dell Stealth mode feature.
Configurable control features:
System setup 25
Option Description
•Onboard LEDs
•LCD screen
•Speakers
•Fans
•Radio
•GPS receiver
•WLAN radio
•WWAN radio.
Miscellaneous devices Allows you to enable or disable various on board devices.
•Enable PC Card
•Enable Camera—Default
•Enable Hard Drive Free Fall Protection
•Enable Dedicated GPS Radio
•Enable Secure Digital (SD) Card
•Secure Digital (SD) Card Boot - Disabled
•Secure Digital Card (SD) Read-Only Mode - Disabled
•Enable Rugged Dock NIC PXE Support - Disabled
Video screen options
Table 30. Video
Option Description
LCD Brightness Allows you to set the display brightness depending upon the power
source. On Battery(50% is default) and On AC (100 % default).
Switchable Graphics This option enables or disables switchable graphics technologies
such as NVIDIA Optimus and SMD PowerExpress.
It should only be enabled for Windows 7 and later versions of
Windows or the Ubuntu OS. This feature is not applicable to other
Operating Systems.
Security
Table 31. Security
Option Description
Admin Password Allows you to set, change, or delete the administrator(admin) password.
The entries to set password are:
•Enter the old password:
•Enter the new password:
•Confirm new password:
Click OK once you set the password.
NOTE: For the first time login, "Enter the old password:" field is marked to "Not set".
Hence, password has to be set for the first time you login and then you can change or
delete the password.
System Password Allows you to set, change, or delete the System password.
The entries to set password are:
26 System setup
Option Description
•Enter the old password:
•Enter the new password:
•Confirm new password:
Click OK once you set the password.
NOTE: For the first time login, "Enter the old password:" field is marked to "Not set".
Hence, password has to be set for the first time you login and then you can change or
delete the password.
Strong Password Allows you to enforce the option to always set strong password.
•Enable Strong Password
This option is not set by default.
Password Configuration You can define the length of your password. Min = 4, Max = 32
Password Bypass Allows you to bypass the System password and the Internal HDD password, when it is set, during a
system restart.
Click one of the options:
•Disabled—Default
•Reboot bypass
Password Change Allows you to change the System password when the administrator password is set.
•Allow Non-Admin Password Changes
This option is set by default.
Non-Admin Setup
Changes
Allows you to determine whether changes to the setup options are allowed when an Administrator
Password is set. If disabled the setup options are locked by the admin password.
•Allow Wireless Switch Changes
This option is not set by default.
UEFI Capsule Firmware
Updates
Allows you to update the system BIOS via UEFI capsule update packages.
•Enable UEFI Capsule Firmware Updates
This option is set by default.
TPM 2.0 Security Allows you to enable or disable the Trusted Platform Module (TPM) during POST.
The options are:
•TPM On—Default
•Clear
•PPI Bypass for Enable Command—Default
•PPI Bypass for Disbale Command
•PPI Bypass for Clear Command
•Attestation Enable—Default
•Key Storage Enable—Default
•SHA-256—Default
Absolute (R) Allows you to activate or disable the optional Computrace software.
The options are:
•Deactivate
•Disable
•Activate—Default
OROM keyboard Access Allows you to enable or disable Option ROM configuration screens via hotkeys during boot.
System setup 27
Option Description
•Enable—Default
•Disable
•One Time Enable
Admin Setup Lockout Allows you to prevent users from entering Setup when an administrator password is set.
•Enable Admin Setup Lockout
This option is not set by default.
Master Password Lockout Allows you to disable master password support.
•Enable Master Password Lockout
This option is not set by default.
NOTE: Hard Disk password should be cleared before the settings can be changed.
SMM Security Mitigation Allows you to enable or disable additional UEFI SMM Security Mitigation protection.
•SMM Security Mitigation
This option is not set by default.
Secure boot
Table 32. Secure Boot
Option Description
Secure Boot Enable Allows you to enable or disable the Secure Boot Feature.
•Secure Boot Enable—Default
Secure Boot Mode Changes to the Secure Boot operation mode modifies the
behaviour of Secure Boot to allow evaluation of UEFI driver
signatures.
Choose one of the option:
•Deployed Mode—Default
•Audit Mode
Expert Key Management Allows you to enable or disable Expert Key Management.
•Enable Custom Mode
This option is not set by default.
The Custom Mode Key Management options are:
•PK—Default
•KEK
•db
•dbx
Intel Software Guard Extensions options
Table 33. Intel Software Guard Extensions
Option Description
Intel SGX Enable This field specifies you to provide a secured environment for
running code/storing sensitive information in the context of the
main OS.
28 System setup
Option Description
Click one of the following options:
•Disabled
•Enabled
•Software controlled—Default
Enclave Memory Size This option sets SGX Enclave Reserve Memory Size
Click one of the following options:
•32 MB
•64 MB
•128 MB—Default
Performance
Table 34. Performance
Option Description
Multi Core Support This field specifies whether the process has one or all cores
enabled. The performance of some applications improves with the
additional cores.
•All—Default
•1
•2
•3
Intel SpeedStep Allows you to enable or disable the Intel SpeedStep mode of
processor.
•Enable Intel SpeedStep
This option is set by default.
C-States Control Allows you to enable or disable the additional processor sleep
states.
•C states
This option is set by default.
Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the
processor.
•Enable Intel TurboBoost
This option is set by default.
Hyper-Thread Control Allows you to enable or disable the HyperThreading in the
processor.
•Disabled
•Enabled—Default
Power management
Table 35. Power Management
Option Description
Lid Switch Allows you to enable or disable the lid switch from automatically turning on / off the screen when the lid
is closed.
System setup 29
Option Description
AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
•Wake on AC
This option is not set by default.
Auto On Time Allows you to set the time at which the computer must turn on automatically.
The options are:
•Disabled—Default
•Every Day
•Weekdays
•Select Days
This option is not set by default.
USB Wake Support Allows you to enable USB devices to wake the system from standby.
•Enable USB Wake Support
•Wake on Dell USB-C Dock
This option is not set by default.
Wireless Radio Control This option if enabled, will sense the connection of the system to a wired network and subsequently
disable the selected wireless radios (WLAN and/or WWAN). Upon disconnection from the wired network
the selected wireless radio will ne enabled.
•Control WLAN radio
•Control WWAN radio
This option is not set by default.
Wake on LAN This option allows the computer to power up from the off state when triggered by a special LAN signal.
Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating
system. This feature only works when the computer is connected to AC power supply.
•Disabled—Default - Does not allow the system to power on by special LAN signals when it receives
a wake-up signal from the LAN or wireless LAN.
•LAN Only - Allows the system to be powered on by special LAN signals.
•WLAN Only - Allows the system to be powered on by special WLAN signals.
•LAN or WLAN - Allows the system to be powered on by special LAN or WLAN signals.
Peak Shift Allows you enable of disable the Peak shift feature. This feature when enabled minimizes the AC power
usage at times of peak demand. Battery doesnot charge between the Peak Shift start and end time
Peak Shift Start and End Time can be configured for all weekdays
This option set the battery threshold value (15 % to 100 %)
Advanced Battery Charge
Configuration
This option enables you to maximize the battery health. By enabling this option, your system uses the
standard charging algorithm and other techniques, during the non-work hours to improve the battery
health.
Advanced Battery Charge Mode can be configured for all weekdays
Battery #1 Charge
Configuration
Allows you to select the charging mode for the battery.
The options are:
•Adaptive—Default
•Standard - Fully charges your battery at a standard rate.
•ExpressCharge- The battery charges over a shorter period of time using Dell’s fast charging
technology.
•Primarily AC use
•Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
Battery #2 Charge
Configuration
30 System setup
Option Description
NOTE: All charging mode may not be available for all the batteries.
Type-C connector Power This option allows you to set maximum power that can be drawn from the Type-C connector.
The options are:
•7.5 Watts—Default
•15 Watts
Power Usage Mode This field lets you choose the system power usage mode.
The options are:
•Power Saver
•Balanced — Default.
•High Performance
Post behavior
Table 36. POST Behavior
Option Description
Adapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
•Enable Adapter Warnings—Default
Keypad (Embedded) Allows you to one of the two methods to enable the keypad that is embedded in the internal keyboard.
•Fn Key Only : The keypad is only enabled when you hold down the Fn key (Default)
•By Num Lock : The keypad is enabled only when the NumLock LED is on.
Numlock Enable Allows you to enable or disable the Numlock function when the system boots.
•Enable Numlock—Default
Fn Lock Options Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys.
•Fn Lock—Default
Click one of the following options:
•Lock Mode Disable/Standard
•Lock Mode Enable/Secondary—Default
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps.
Click one of the following options:
•Minimal—Default
•Thorough
•Auto
Extended BIOS POST
Time
Allows you to create an additional preboot delay.
Click one of the following options:
•0 seconds—Default
•5 seconds
•10 seconds
Full Screen Logo Allows you to display full screen logo, if your image matches screen resolution.
System setup 31
Option Description
•Enable Full Screen Logo
This option is not set by default.
Warnings and Errors Allows you to select different options to either stop, prompt and wait for user input, continue when
warnings are detected but pause on errors, or continue when either warnings or errors are detected
during the POST process.
Click one of the following options:
•Prompt on Warnings and Errors—Default
•Continue on Warnings
•Continue on Warnings and Errors
MAC Address Pass-
Through
This feature replaces the external NIC MAC address (in a supported dock or dongle) with selected MAC
address from the system.
Click one of the following options:
•Passthrough MAC Address—Default
•Integrated NIC 1 MAC Address
•Disabled
Manageability
Table 37. Manageability
Option Description
USB Provision This option lets you to provision Intel AMT using provisioning file
stored on local USB storage
MEBx Hotkey This option allows you to enable or disable hotkey (Ctrl +P)
functionality at Dell logo to enter Management Engine BIOS
Extension (MEBx)
Virtualization support
Table 38. Virtualization Support
Option Description
Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by the Intel Virtualization technology.
•Enable Intel Virtualization Technology
This option is set by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by the Intel Virtualization technology for direct I/O.
•Enable VT for Direct I/O
This option is set by default.
Trusted Execution This option allows Measured Virtual Machine Monitor (MVMM) to use additional hardware capabilities
provisioned by Intel Trusted Execution Technology
•Enable Trusted Execution
NOTE: The Intel Virtualization Technology, VT for direct I/O and TPM has to be enabled
and activated for this feature to work.
32 System setup
Wireless options
Table 39. Wireless
Option Description
Wireless Switch Allows to set the wireless devices that can be controlled by the
wireless switch.
The options are:
•WWAN
•GPS (on WWAN Module)
•WLAN
•Bluetooth
All the options are enabled by default.
Wireless Device Enable Allows you to enable or disable the internal wireless devices.
The options are:
•WWAN/GPS
•WLAN
•Bluetooth
All the options are enabled by default.
Maintenance
Table 40. Maintenance
Option Description
Service Tag Displays the service tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
BIOS Downgrade Allows you to flash previous revisions of the system firmware.
•Allow BIOS Downgrade
This option is set by default.
Data Wipe Allows you to securely erase data from all internal storage devices.
•Wipe on Next Boot
This option is not set by default.
Bios Recovery BIOS Recovery from Hard Drive—This option is set by default. Allows you to recover the corrupted
BIOS from a recovery file on the HDD or an external USB key.
BIOS Auto-Recovery— Allows you to recover the BIOS automatically.
NOTE: BIOS Recovery from Hard Drive field should be enabled.
Always Perform Integrity Check—Performs integrity check on every boot.
System setup 33
System logs
Table 41. System Logs
Option Description
BIOS events Allows you to view and clear the System Setup (BIOS) POST events.
Thermal Events Allows you to view and clear the System Setup (Thermal) events.
Power Events Allows you to view and clear the System Setup (Power) events.
About
Licence Information
Copyright (c) 1993-2013 Texas Instruments Incorporated
http://www.ti.com/
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are
met:
• Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
• Neither the name of Texas Instruments Incorporated nor the names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------------------------------
Copyright (c) 1992-2004 by P.J. Plauger ALL RIGHTS RESERVED
------------------------------------------------------------------------------------
Copyright 1992-2011 Edison Design Group, Inc.
Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are
duplicated in all source code forms. The name of Edison Design Group, Inc. may not be used to endorse or promote products derived from
this software without specific prior written permission. THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. Any use of this software is at user's own risk.
------------------------------------------------------------------------------------
Copyright (c) 1994 Hewlett-Packard Company
Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in
supporting documentation. Hewlett-packard company makes no representations about the suitability of this software for any purpose. It is
provided "as is" without express or implied warranty
Boot Sequence
Boot sequence enables you to bypass the System Setup–defined boot device order and boot directly to a specific device (for example:
optical drive or hard drive). During the Power-on Self-Test (POST), when the Dell logo appears, you can:
• Access System Setup by pressing F2 key
34 System setup
• Bring up the one-time boot menu by pressing F12 key.
The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are:
• Removable Drive (if available)
• STXXXX Drive
NOTE: XXXX denotes the SATA drive number.
• Optical Drive (if available)
• SATA Hard Drive (if available)
• Diagnostics
NOTE: Choosing Diagnostics, displays the ePSA diagnostics screen.
The boot sequence screen also displays the option to access the System Setup screen.
Updating the BIOS in Windows
It is recommended to update your BIOS (System Setup), when you replace the system board or if an update is available.
NOTE: If BitLocker is enabled, it must be suspended prior to updating the system BIOS, and then re-enabled after the
BIOS update is completed.
1. Restart the computer.
2. Go to Dell.com/support.
• Enter the Service Tag or Express Service Code and click Submit.
• Click Detect Product and follow the instructions on screen.
3. If you are unable to detect or find the Service Tag, click Choose from all products.
4. Choose the Products category from the list.
NOTE: Choose the appropriate category to reach the product page
5. Select your computer model and the Product Support page of your computer appears.
6. Click Get drivers and click Drivers and Downloads.
The Drivers and Downloads section opens.
7. Click Find it myself.
8. Click BIOS to view the BIOS versions.
9. Identify the latest BIOS file and click Download.
10. Select your preferred download method in the Please select your download method below window, click Download File.
The File Download window appears.
11. Click Save to save the file on your computer.
12. Click Run to install the updated BIOS settings on your computer.
Follow the instructions on the screen.
Updating BIOS on systems with BitLocker enabled
CAUTION: If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it will not
recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the system will ask for
this on each reboot. If the recovery key is not known this can result in data loss or an unnecessary operating system
reinstall. For more information about this subject, see Knowledge Article: https://www.dell.com/support/article/
sln153694
Updating your system BIOS using a USB flash drive
If the system cannot load into Windows but there is still a need to update the BIOS, download the BIOS file using another system and save
it to a bootable USB Flash Drive.
NOTE: You will need to use a bootable USB Flash drive. Please refer to the following article for further details: https://
www.dell.com/support/article/sln143196/
1. Download the BIOS update .EXE file to another system.
System setup 35
2. Copy the file e.g. O9010A12.EXE onto the bootable USB Flash drive.
3. Insert the USB Flash drive into the system that requires the BIOS update.
4. Restart the system and press F12 when the Dell Splash logo appears to display the One Time Boot Menu.
5. Using arrow keys, select USB Storage Device and click Return.
6. The system will boot to a Diag C:\> prompt.
7. Run the file by typing the full filename e.g. O9010A12.exe and press Return.
8. The BIOS Update Utility will load, follow the instructions on screen.
Figure 1. DOS BIOS Update Screen
Updating the Dell BIOS in Linux and Ubuntu environments
If you want to update the system BIOS in a Linux environment such as Ubuntu, see https://www.dell.com/support/article/sln171755/.
System and setup password
Table 42. System and setup password
Password type Description
System password Password that you must enter to log on to your system.
Setup password Password that you must enter to access and make changes to the
BIOS settings of your computer.
You can create a system password and a setup password to secure your computer.
CAUTION: The password features provide a basic level of security for the data on your computer.
CAUTION: Anyone can access the data stored on your computer if it is not locked and left unattended.
NOTE: System and setup password feature is disabled.
Assigning a system setup password
You can assign a new System or Admin Password only when the status is in Not Set.
To enter the system setup, press F2 immediately after a power-on or re-boot.
1. In the System BIOS or System Setup screen, select Security and press Enter.
36 System setup
The Security screen is displayed.
2. Select System/Admin Password and create a password in the Enter the new password field.
Use the following guidelines to assign the system password:
• A password can have up to 32 characters.
• The password can contain the numbers 0 through 9.
• Only lower case letters are valid, upper case letters are not allowed.
• Only the following special characters are allowed: space, (”), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`).
3. Type the system password that you entered earlier in the Confirm new password field and click OK.
4. Press Esc and a message prompts you to save the changes.
5. Press Y to save the changes.
The computer reboots.
Deleting or changing an existing system setup password
Ensure that the Password Status is Unlocked (in the System Setup) before attempting to delete or change the existing System and/or
Setup password. You cannot delete or change an existing System or Setup password, if the Password Status is Locked.
To enter the System Setup, press F2 immediately after a power-on or reboot.
1. In the System BIOS or System Setup screen, select System Security and press Enter.
The System Security screen is displayed.
2. In the System Security screen, verify that Password Status is Unlocked.
3. Select System Password, alter or delete the existing system password and press Enter or Tab.
4. Select Setup Password, alter or delete the existing setup password and press Enter or Tab.
NOTE: If you change the System and/or Setup password, re-enter the new password when prompted. If you delete
the System and/or Setup password, confirm the deletion when prompted.
5. Press Esc and a message prompts you to save the changes.
6. Press Y to save the changes and exit from System Setup.
The computer reboot.
System setup 37
Software
This chapter details the supported operating systems along with instructions on how to install the drivers.
Topics:
•Operating system
•Downloading drivers
Operating system
Table 43. Operating system
Operating System Supported
• Windows 10 Professional (64 bit)
• Windows Enterprise (64 bit)
• Windows 7 via Dell CFI ┼
• Ubuntu 18.04
NOTE: ┼ Supported on Intel Dual-Core i5-6300U SkyLake processor only.
Downloading drivers
1. Turn on the .
2. Go to Dell.com/support.
3. Click Product Support, enter the Service Tag of your , and then click Submit.
NOTE: If you do not have the Service Tag, use the auto detect feature or manually browse for your model.
4. Click Drivers and Downloads.
5. Select the operating system installed on your .
6. Scroll down the page and select the driver to install.
7. Click Download File to download the driver for your .
8. After the download is complete, navigate to the folder where you saved the driver file.
9. Double-click the driver file icon and follow the instructions on the screen.
5
38 Software
Getting help
Topics:
•Contacting Dell
Contacting Dell
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice,
packing slip, bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services
may not be available in your area. To contact Dell for sales, technical support, or customer service issues:
1. Go to Dell.com/support.
2. Select your support category.
3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page.
4. Select the appropriate service or support link based on your need.
6
Getting help 39