Table of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Operating the monitor
- Troubleshooting
- Appendix
DELL G2722HS User Manual
Displayed below is the user manual for G2722HS by DELL which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Model: G2722HS
Regulatory model: G2722HSt
Dell 27 Gaming Monitor
-G2722HS
User’s Guide
NOTE: A NOTE indicates important information that helps you make
better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of
data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage,
personal injury, or death.
Copyright © 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks
are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective
owners.
2022 – 01
Rev. A00
| 3
Contents
Safety instructions..............................5
About your monitor .............................6
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . 6
Product features. . . . . . . . . . . . . . . . . . . . . . . . . .8
Identifying parts and controls. . . . . . . . . . . . . . . . . . .9
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Back view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Bottom view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Monitor specifications. . . . . . . . . . . . . . . . . . . . . . 12
Resolution specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Preset display modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Environmental characteristics . . . . . . . . . . . . . . . . . . . . . . . . 17
Pin assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Plug-and-Play . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LCD monitor quality and pixel policy . . . . . . . . . . . . . . 20
Ergonomics . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Handling and moving your display. . . . . . . . . . . . . . . . 23
Maintenance guidelines . . . . . . . . . . . . . . . . . . . . . 24
Cleaning your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Setting up the monitor..........................25
Connecting the stand . . . . . . . . . . . . . . . . . . . . . . 25
Using the tilt and vertical extension . . . . . . . . . . . . . . 28
Connecting your monitor . . . . . . . . . . . . . . . . . . . . 29
Organizing your cables . . . . . . . . . . . . . . . . . . . . . 30
Securing your monitor using Kensington lock (optional) . . . 31
Removing the monitor stand . . . . . . . . . . . . . . . . . . 32
VESA wall mounting (optional) . . . . . . . . . . . . . . . . . 33
Contents | 3
4 | Contents
Operating the monitor ..........................34
Turning on the monitor . . . . . . . . . . . . . . . . . . . . . 34
Using the joystick control . . . . . . . . . . . . . . . . . . . . 34
Using the rear-panel controls . . . . . . . . . . . . . . . . . . 35
Using the On-Screen Display (OSD) menu . . . . . . . . . . . 37
Accessing the menu system . . . . . . . . . . . . . . . . . . . . . . . . . 37
OSD warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Locking the rear-panel control buttons . . . . . . . . . . . . . . . . . . .50
Setting the maximum resolution. . . . . . . . . . . . . . . . . . . . . . .51
Troubleshooting ...............................52
Self-test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Built-in diagnostics . . . . . . . . . . . . . . . . . . . . . . . 54
Common problems. . . . . . . . . . . . . . . . . . . . . . . . 55
Product specific problems . . . . . . . . . . . . . . . . . . . 57
Appendix.....................................58
FCC notices (U.S. only) and other regulatory information . . . 58
Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . 58
EU product database for energy label and product information
sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Safety instructions | 5
Safety instructions
WARNING: Use of controls, adjustments, or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.
• Place the monitor on a solid surface and handle it carefully. The screen is fragile
and can be damaged if dropped or hit sharply.
• Always be sure that your monitor is electrically rated to operate with the AC
power available in your location.
• Keep the monitor in room temperature. Excessive cold or hot conditions can have
an adverse effect on the liquid crystal of the display.
• Do not subject the monitor to severe vibration or high impact conditions. For
example, do not place the monitor inside a car trunk.
• Unplug the monitor when it is going to be left unused for an extended period of
time.
• To avoid electric shock, do not attempt to remove any cover or touch the inside of
the monitor.
For information on safety instructions, see the Safety, Environmental, and Regulatory
Information (SERI).
6 | About your monitor
About your monitor
Package contents
Your monitor ships with the components shown in the table below. If any component is
missing, contact Dell. For more information, see Contact Dell.
NOTE: Some components may be optional and may not ship with your
monitor. Somefeatures may not be available in certain countries.
Display
Stand riser
Stand base
Power cable (varies by country)
DisplayPort cable (DisplayPort to
DisplayPort)
About your monitor | 7
HDMI cable
•Quick Start Guide
•Safety, Environmental, and
Regulatory Information
8 | About your monitor
Product features
The Dell G2722HS monitor has an active matrix, Thin-Film Transistor (TFT), Liquid
Crystal Display (LCD), and LED backlight. The monitor features include:
• 68.47 cm (27 in.) viewable area (Measured diagonally) 1920 x 1080 (16:9)
resolution, plus full-screen support for lower resolutions.
• Color gamut of sRGB 99%.
• Digital connectivity with DisplayPort and HDMI.
• Tilt and height adjustment capabilities.
• Removable pedestal stand and Video Electronics Standards Association (VESA™)
100 mm mounting holes for flexible mounting solutions.
• Plug and play capability if supported by your computer.
• On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
• Game enhanced features such as Timer, Frame Rate Counter and Dark Stabilizer
in addition to enhanced game modes such as FPS, MOBA/RTS, SPORTS, or RPG
, and 3 additional game modes to personalize your preferences.
• Power and OSD buttons lock.
• Security lock slot.
• Stand lock.
• ≤ 0.3 W in Standby Mode.
• NVIDIA® G-SYNC® Compatible Certification and AMD FreeSync™ Premium
Technology minimizes graphic distortions like screen tearing and stuttering for
smoother, fluid gameplay.
• Premium Panel Exchange for peace of mind.
• Optimize eye comfort with a flicker-free screen and ComfortView Plus feature.
• The Monitor uses Low Blue Light panel and is compliant with TÜV Rheinland
(Hardware Solution) at factory reset or default setting. This always on, built-in low
blue light solution reduces hazardous blue light emissions, without sacrificing true-
to-life colors.
WARNING: The possible long-term effects of blue light emission from
the monitor may cause damage to the eyes, including eye fatigue, digital
eye strain, and so on. ComfortView Plus feature is designed to reduce the
amount of blue light emitted from the monitor to optimize eye comfort.
About your monitor | 9
Identifying parts and controls
Front view
1
Label Description Use
1Power LED indicator To turn the monitor on or off.
Solid white light indicates
the monitor is turned on and
functioning normally. Blinking
white light indicates the monitor
is in Standby Mode.
10 | About your monitor
Back view
7
1
2
3
4
5
6
Label Description Use
1VESA mounting holes (100 mm x
100 mm-behind attached VESA
cover)
Wall mount monitor using VESA-
compatible wall mount kit (100 mm x 100
mm).
2Regulatory label Lists the regulatory approvals.
3Stand release button Releases stand from the monitor.
4Joystick Use it to control the OSD menu.
5Function buttons For more information, see Operating the
monitor.
6Barcode, serial number, and Service
Tag label
Refer to this label if you need to contact
Dell for technical support. The Service
Tag is a unique alphanumeric identifier
that enables Dell service technicians
to identify the hardware components
in your computer and access warranty
information.
7Cable-management slot Use to organize cables by inserting them
through the slot.
About your monitor | 11
Bottom view
1 2 4 5 63 7
Label Description Use
1Power connector Connect the power cable (shipped with your monitor).
2Security lock slot Secures monitor with security cable lock (sold separately).
3Stand lock Lock the stand to the monitor using a M3 x 6 mm screw
(screw not included).
4HDMI port
(HDMI 1)
Connect your computer with the HDMI cable (shipped with
your monitor).
5HDMI port
(HDMI 2)
Connect your computer with the HDMI cable (shipped with
your monitor).
6DisplayPort Connect to your computer with the DisplayPort cable
(shipped with your monitor).
7Headphone port Connect the headphones to the monitor.
WARNING: The possible long-term effect of
listening to audio at high volume through the
headphones may cause damage to your hearing
ability.
12 | About your monitor
Monitor specifications
Model G2722HS
Screen type Active matrix - TFT LCD
Panel type In-plane switching Technology
Aspect ratio 16:9
Viewable image dimensions
Diagonal 684.70 mm (27 in.)
Active Area
Horizontal 596.74 mm (23.49 in.)
Vertical 335.66 mm (13.22 in.)
Area 200301.70 mm2 (310.53 in.2)
Pixel pitch 0.3108 mm x 0.3108 mm
Pixel per inch (PPI) 81.59
Viewing angle
Horizontal 178° (typical)
Vertical 178° (typical)
Brightness 350 cd/m² (typical)
Contrast ratio 1000 to 1 (typical)
Display screen coating Anti-glare treatment of the front polarizer (3H) hard
coating
Backlight LED edgelight system
Response Time (Gray to
Gray)
5 ms (Fast mode)
2 ms (SuperFast mode)
1 ms (Extreme mode)
NOTE: In Extreme mode, slight artifacts
may be encountered due to overdriving for
fast speed and responsiveness. Use Super
Fast/Fast mode for optimal front of screen
experience and game play.
Color depth 16.78 million colors
Color gamut* sRGB 99%
Connectivity •1 x DisplayPort 1.2 port
•2 x HDMI 2.0 ports
•1 x Audio headphone port (3.5 mm jack)
About your monitor | 13
Border width (edge of monitor to active area)
Top 7.42 mm
Left/Right 7.43 mm
Bottom 20.47 mm
Adjustability
Height adjustable stand 100 mm
Tilt -5° to 21°
Cable management Yes
Dell Display Manager (DDM)
Compatibility Easy Arrange
and other key features
Security Security lock slot (cable lock sold separately)
* At panel native only, under Custom Mode preset.
Resolution specifications
Model G2722HS
Resolution specifications HDMI DisplayPort
Maximum preset
resolution 1920 x 1080 at 165 Hz
Horizontal scan range 30 kHz to 200 kHz
Vertical scan range 48 Hz to 165 Hz
Video display capabilities
(HDMI & DisplayPort
alternate mode)
480p@60Hz, 576p@50Hz, 720p@50Hz, 720P@60Hz,
1080p@50Hz, 1080p@60Hz, 1080p@120Hz
14 | About your monitor
Preset display modes
Display Mode Horizontal
Frequency
(kHz)
Vertical
frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(Horizontal/
Vertical)
VGA 720 x 400 31.47 70.09 28.32 -/+
VGA 640 x 480 31.47 59.94 25.18 -/-
VESA 640 x 480 37.50 75.00 31.50 -/-
VESA 800 x 600 37.88 60.32 40.00 +/+
VESA 800 x 600 46.88 75.00 49.50 +/+
VESA 1024 x 768 48.36 60.00 65.00 -/-
VESA 1024 x 768 60.02 75.03 78.75 +/+
MAC 1152 x 864 67.50 75.00 108.00 +/+
CVT 1280 x 800 49.70 59.80 83.50 +/+
VESA 1280 x 1024 64.00 60.00 108.00 +/+
VESA 1280 x 1024 79.98 75.03 135.00 +/+
VESA 1680 x 1050 65.92 59.95 146.25 +/-
CVT 1920 x 1080 67.50 60.00 148.50 +/-
1920 x 1080 137.26 120.00 285.50 +/-
1920 x 1080 166.59 143.98 346.50 +/-
1920 x 1080 186.45 165.00 387.81 +/-
About your monitor | 15
Electrical specifications
Video input signals •Digital video signal for each dierential line
Per dierential line at 100 ohm impedance
•DisplayPort /HDMI signal input support
Input voltage/ frequency/current 100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.5 A
(maximum)
Inrush current 120 V: 30 A (Max.)
240 V: 60 A (Max.)
Power Consumption 0.3 W (Off Mode)1
0.3 W (Standby Mode)1
20.7 W (On Mode)1
43 W (Max)2
16.19 W (Pon)3
50.95 kWh (TEC)3
1 As defined in EU 2019/2021 and EU 2019/2013.
2 Max brightness and contrast setting.
3 Pon: Power consumption of On Mode measured with reference to Energy Star test
method.
TEC: Total energy consumption in kWh measured with reference to Energy Star test
method.
This document is informational only and reflects laboratory performance. Your product
may perform differently, depending on the software, components and peripherals
you ordered and shall have no obligation to update such information. Accordingly, the
customer should not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is expressed or
implied.
16 | About your monitor
Physical characteristics
Model G2722HS
Connector type DisplayPort 1.2
HDMI 2.0
Signal cable type
NOTE: Dell monitors are designed
to work optimally with the video
cables that are shipped with your
monitor. As Dell does not have
control over the different cable
suppliers in the market, the type
of material, connector and process
used to manufacture these cables,
Dell does not guarantee video
performance on cables that are not
shipped with your Dell monitor.
DisplayPort 1.8 m cable
HDMI 1.0 m cable
Dimensions (with stand)
Height (extended) 492.95 mm (19.41 in.)
Height (compressed) 392.95 mm (15.47 in.)
Width 611.60 mm (24.08 in.)
Depth 190.37 mm (7.49 in.)
Dimensions (without stand)
Height 363.41 mm (14.31 in.)
Width 611.60 mm (24.08 in.)
Depth 63.14 mm (2.49 in.)
Stand dimensions
Height (extended) 386.00 mm (15.20 in.)
Height (compressed) 337.49 mm (13.29 in.)
Width 230.25 mm (9.06 in.)
Depth 190.37 mm (7.49 in.)
Weight
Weight with packaging 9.08 kg (20.01 lb)
Weight with stand assembly and cables 6.51 kg (14.35 lb)
Weight without stand assembly (For wall
mount or VESA mount considerations -
no cables)
4.68 kg (10.31 lb)
About your monitor | 17
Weight of stand assembly 1.52 kg (3.35 lb)
Environmental characteristics
Compliant Standards
•RoHS Compliant
•BFR/PVC Reduce monitor (The circuit boards are made from BFR/PVC-free
laminates)
•Arsenic-Free glass and Mercury-Free for the panel only
Temperature
Operating 0°C to 40°C (32°F to 104°F)
Non-operating –20°C to 60°C (–4°F to 140°F)
Humidity
Operating 10% to 80% (non-condensing)
Non-operating 5% to 90% (non-condensing)
Altitude
Operating 5,000 m (16,404 ft) (maximum)
Non-operating 12,192 m (40,000 ft) (maximum)
Thermal dissipation 146.72 BTU/hour (maximum)
70.63 BTU/hour (On Mode)
18 | About your monitor
Pin assignments
DisplayPort connector
Pin
number 20-pin side of theconnected
signal cable Pin
number 20-pin side of theconnected
signal cable
1ML3(n) 11 GND
2GND 12 ML0(p)
3ML3(p) 13 CONFIG1
4ML2(n) 14 CONFIG2
5GND 15 AUX CH (p)
6ML2(p) 16 GND
7ML1(n) 17 AUX CH (n)
8GND 18 Hot Plug Detect
9ML1(p) 19 Return
10 ML0(n) 20 DP_PWR
About your monitor | 19
HDMI port
Pin number 19-pin side of
theconnected signal
cable
Pin
number
19-pin side of
theconnected signal
cable
1TMDS DATA 2+ 11 TMDS CLOCK SHIELD
2TMDS DATA 2 SHIELD 12 TMDS CLOCK-
3TMDS DATA 2- 13 CEC
4TMDS DATA 1+ 14 Reserved (N.C. on device)
5TMDS DATA 1 SHIELD 15 DDC CLOCK (SCL)
6TMDS DATA 1- 16 DDC DATA (SDA)
7TMDS DATA 0+ 17 DDC/CEC Ground
8TMDS DATA 0 SHIELD 18 +5 V POWER
9TMDS DATA 0- 19 HOT PLUG DETECT
10 TMDS CLOCK+
20 | About your monitor
Plug-and-Play
You can install the monitor in any Plug-and-Play-compatible system. The monitor
automatically provides the computer system with its extended display identification
data (EDID) using display data channel (DDC) protocols so the computer can configure
itself and optimize the monitor settings. Most monitor installations are automatic;
you can select different settings if desired. For more information about changing the
monitor settings, see Operating the monitor.
LCD monitor quality and pixel policy
During the LCD monitor manufacturing process, it is not uncommon for one or more
pixels to become fixed in an unchanging state which are hard to see and do not affect
the display quality or usability. For more information on Dell Monitor Quality and Pixel
Policy, see www.dell.com/pixelguidelines.
About your monitor | 21
Ergonomics
CAUTION: Improper or prolonged usage of keyboard may result in injury.
CAUTION: Viewing the monitor screen for extended periods of time may
result in eye strain.
For comfort and efficiency, observe the following guidelines when setting up and using
your computer workstation:
• Position your computer so that the monitor and keyboard are directly in front of
you as you work. Special shelves are commercially available to help you correctly
position your keyboard.
• To reduce the risk of eye strain and neck/arm/back/shoulder pain from using the
monitor for long periods of time, we suggest you to:
1. Set the screen about 20 to 28 in. (50-70 cm) from your eyes.
2. Blink frequently to moisten or rewet your eyes when working with the monitor.
3. Take regular and frequent breaks for 20 minutes every two hours.
4. Look away from your monitor and gaze at a distant object at 20 feet away for
at least 20 seconds during the breaks.
5. Perform stretches to relieve tension in the neck/arm/back/shoulders during
the breaks.
• Make sure that the monitor screen is at eye level or slightly lower when you are
sitting in front of the monitor.
• Adjust the tilt of the monitor, its contrast, and brightness settings.
• Adjust the ambient lighting around you (such as overhead lights, desk lamps, and
the curtains or blinds on nearby windows) to minimize reflections and glare on the
monitor screen.
• Use a chair that provides good lower-back support.
• Keep your forearms horizontal with your wrists in a neutral, comfortable position
while using the keyboard or mouse.
• Always leave space to rest your hands while using the keyboard or mouse.
• Let your upper arms rest naturally on both sides.
• Ensure that your feet are resting flat on the floor.
• When sitting, make sure that the weight of your legs is on your feet and not
on the front portion of your seat. Adjust your chair’s height or use a footrest if
necessary to maintain a proper posture.
• Vary your work activities. Try to organize your work so that you do not have to sit
and work for extended periods of time. Try to stand or get up and walk around at
regular intervals.
22 | About your monitor
• Keep the area under your desk clear of obstructions and cables or power cords
that may interfere with comfortable seating or present a potential trip hazard.
monitor screen at or
below eye level
monitor and
keyboard
positioned
directly in front
of the user
feet at on the
oor
wrists relaxed
and at
About your monitor | 23
Handling and moving your display
To ensure the monitor is handled safely when lifting or moving it, follow the guidelines
mentioned below:
• Before moving or lifting the monitor, turn off your computer and the monitor.
• Disconnect all cables from the monitor.
• Place the monitor in the original box with the original packing materials.
• Hold the bottom edge and the side of the monitor firmly without applying
excessive pressure when lifting or moving the monitor.
• When lifting or moving the monitor, ensure the screen is facing away from you and
do not press on the display area to avoid any scratches or damage.
• When transporting the monitor, avoid any sudden shock or vibration to it.
24 | About your monitor
• When lifting or moving the monitor, do not turn the monitor upside down while
holding the stand base or stand riser. This may result in accidental damage to the
monitor or cause personal injury.
Maintenance guidelines
Cleaning your monitor
WARNING: Before cleaning the monitor, unplug the monitor power cable
from the electrical outlet.
CAUTION: Read and follow the Safety Instructions before cleaning the
monitor.
For best practices, follow these instructions in the list below while unpacking, cleaning,
or handling your monitor:
• To clean your anti-static screen, lightly dampen a soft, clean cloth with water. If
possible, use a special screen-cleaning tissue or solution suitable for the anti-static
coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed
air.
• Use a lightly-dampened, soft cloth to clean the monitor. Avoid using detergent of
any kind as some detergents leave a milky film on the monitor.
• If you notice white powder when you unpack your monitor, wipe it off with a cloth.
• Handle your monitor with care as a darker-colored monitor may get scratched and
show white scuff marks more than a lighter- colored monitor.
• To help maintain the best image quality on your monitor, use a dynamically
changing screen saver and turn off your monitor when not in use.
Setting up the monitor | 25
Setting up the monitor
Connecting the stand
NOTE: The stand assembly is not pre-installed when the monitor is
shipped from the factory.
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that
were included with the stand.
To set up the monitor stand:
1. Align and place the stand riser on the stand base.
2. Open the screw handle at the bottom of the stand base and turn it clockwise to
secure the stand assembly.
3. Close the screw handle.
12
3
26 | Setting up the monitor
4. Open the protective cover on the monitor to access the VESA slot on the
monitor.
NOTE: Before connecting the stand assembly to the display, ensure that
the front flap is opened to allow space for the assembly.
5. Slide the tabs on the stand riser into the slots on the display back cover and press
down the stand assembly to snap it into place.
Setting up the monitor | 27
6. Hold the stand riser and lift the monitor carefully, then place it on a at surface.
NOTE: Hold the stand riser firmly when lifting the monitor to avoid any
accidental damage.
7. Lift the protective cover from the monitor.
28 | Setting up the monitor
Using the tilt and vertical extension
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that were
included with the stand.
Tilt
With the stand attached to the monitor, you can tilt the monitor for the most
comfortable viewing angle.
5°
21°
Vertical extension
The stand extends vertically up to 100mm. The image below illustrates how to extend
the stand vertically.
100 mm
NOTE: The stand assembly is not pre-installed when the monitor is
shipped from the factory.
Setting up the monitor | 29
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety instructions.
NOTE: Dell monitors are designed to work optimally with the Dell-supplied
cables inside the box. Dell does not guarantee the video quality and
performance if non-Dell cables are used.
NOTE: Route the cables through the cable-management slot before
connecting them.
NOTE: Do not connect all the cables to the computer at the same time.
NOTE: The images are for the purpose of illustration only. The appearance
of the computer may vary.
To connect your monitor to the computer:
1. Turn o your computer.
2. Connect the DisplayPort/HDMI cable from your monitor to the computer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu and turn on your
computer.
Connecting the HDMI cable
HDMI
HDMI
Setting up the monitor | 31
Securing your monitor using Kensington lock (optional)
The security lock slot is located at the bottom of the monitor. (See Security lock
slot)
For more information on using the Kensington lock (purchased separately), see the
documentation that is shipped with the lock.
Secure your monitor to a table using the Kensington security lock.
NOTE: The image is for the purpose of illustration only. Appearance of the
lock may vary.
32 | Setting up the monitor
Removing the monitor stand
CAUTION: To prevent scratches on the LCD screen when removing the
stand,ensure that the monitor is placed on a soft, clean surface.
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that were
included with the stand.
To remove the stand:
1. Place the monitor on a soft cloth or cushion.
2. Press and hold the stand-release button.
3. Lift the stand up and away from the monitor.
3
Setting up the monitor | 33
VESA wall mounting (optional)
NOTE: Use M4 x 10 mm screws to connect the monitor to the wall-
mounting kit.
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1. Place the monitor on a soft cloth or cushion on a stable, at table.
2. Remove the monitor stand (see Removing the monitor stand).
3. Use a Phillips crosshead screwdriver to remove the four screws securing the
plastic cover.
4. Attach the mounting bracket from the wall mounting kit to the monitor.
5. Mount the monitor on the wall. For more information, see the documentation that
is shipped with the wall mounting kit.
NOTE: For use only with UL or CSA or GS-listed wall mount bracket with
minimum weight/load bearing capacity of 18.72 kg (41.24 lb).
34 | Operating the monitor
Operating the monitor
Turning on the monitor
Press the button to turn on the monitor.
Using the joystick control
Use the joystick control on the rear of the monitor to make OSD adjustments.
1. Press the joystick button to launch the OSD main menu.
2. Move the joystick up/down/left/right to toggle between options.
3. Press the joystick button again to confirm the settings and exit.
Joystick Description
• When the OSD menu is on, press the button to confirm the selection
or save the settings.
• When the OSD menu is off, press the button to launch the OSD main
menu. See Accessing the menu system.
Operating the monitor | 35
• For 2-way (right and left) directional navigation.
• Move right to enter the submenu.
• Move left to exit from the submenu.
• Increases (right) or decreases (left) the parameters of selected menu
item.
• For 2-way (up and down) directional navigation.
• Toggles between the menu items.
• Increases (up) or decreases (down) the parameters of selected menu
item.
Using the rear-panel controls
Use the control buttons on the rear of the monitor to access the OSD menu and
shortcut keys.
1
2
3
4
5
The following table describes the rear panel buttons:
Rear-panel button Description
1
Menu
Use the Menu button to launch the on-screen
display (OSD) and select the OSD menu.
See Accessing the menu system.
2
Exit
To exit the OSD main menu.
3
Shortcut key:
Preset Modes
Choose a desired color mode from a list of preset
options.
36 | Operating the monitor
Rear-panel button Description
4
Shortcut key:
Dark Stabilizer
To launch the Dark Stabilizer menu.
5
Shortcut key:
Brightness/Contrast
To directly access the Brightness/Contrast
adjustment sliders.
When you press any of these buttons (excluding the joystick button), the OSD status
bar appears to display the current settings of some OSD functions.
Dell 27 Gaming Monitor
G2722HS
Standard
Preset Modes
On
AMD FreeSync
Fast
Response Time
0
Dark Stabilizer
Operating the monitor | 37
Using the On-Screen Display (OSD) menu
Accessing the menu system
Icon Menu and
Submenus
Description
Game Use this menu to personalize your visual gameplay
experience.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
Hue
Saturation
Reset Game
Game Enhance Mode
Preset Modes
Response Time
AMD FreeSync Premium
Dark Stabilizer
Standard
Fast
On
0
Preset Modes Allows you to choose from a list of preset color modes.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
Hue
Saturation
Reset Game
Game Enhance Mode
Preset Modes
Response Time
AMD FreeSync Premium
Dark Stabilizer
FPS
Standard
RPG
MOBA/RTS
SPORTS
Game 1
Game 2
Game 3
•Standard: Loads the monitor’s default color settings.
This is the default preset mode.
•FPS: Loads color settings ideal for First-Person Shooter
(FPS) games.
•MOBA/RTS: Loads color settings ideal for Multiplayer
Online Battle Arena (MOBA) and Real-Time Strategy
(RTS) games.
•RPG: Loads color settings ideal for Role-Playing Games
(RPG).
•SPORTS: Loads color settings ideal for sports games.
•Game 1/Game 2/Game 3: Allows you to customize
the settings such as Color, Response Time, and Dark
Stabilizer for your gaming needs.
38 | Operating the monitor
Icon Menu and
Submenus
Description
•Warm: Presents colors at lower color temperatures. The
screen appears warmer with a red/yellow tint.
•Cool: Presents colors at higher color temperatures. The
screen appears cooler with a blue tint.
•Custom Color: Allows you to manually adjust the color
settings. Move the joystick to adjust the Gain, Oset,
Hue, and Saturation values and create your own preset
color mode.
Game Enhance
Mode
The feature offers three available functions to enhance
your gameplay experience.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
Hue
Saturation
Reset Game
Game Enhance Mode
Preset Modes
Response Time
AMD FreeSync Premium
Dark Stabilizer
O
Frame Rate
Timer
Display Alignment
•O
Select Off to disable the functions under Game
Enhance Mode.
•Timer
Enable or disable the timer at the upper left corner of the
display. The timer shows the time elapsed since the game
starts. Select an option from the time-interval list to keep
you aware of the remaining time.
•Frame Rate
Select On to display the current frames per second when
playing games. The higher the rate, the smoother the
motion appears.
•Display Alignment
Activating the function may help ensure the perfect
alignment of the video contents from multiple displays.
Operating the monitor | 39
Icon Menu and
Submenus
Description
AMD FreeSync
Premium
Allows you to set the AMD FreeSync Premium On or Off.
When you select On and set the monitor at the highest
frame rate, both input lag and screen tearing are possible to
be eliminated, delivering smoother gameplay.
NOTE: To set the highest frame rate, see Setting the
maximum frame rate.
Response
Time
Allows you to set the Response Time to Fast, Super
Fast, or Extreme.
Dark Stabilizer Improves the visibility in the dark gaming scenarios. The
higher the value (0 to 3), the more visible the display image
will be in dark environment.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
Hue
Saturation
Reset Game
Game Enhance Mode
Preset Modes
Response Time
AMD FreeSync Premium
Dark Stabilizer
0
Hue This feature can shift the color of the video image to green
or purple. This is used to adjust the desired esh-tone color.
Use the joystick to adjust the hue from 0 to 100.
Move the joystick up to increase the green shade of the
video image.
Move the joystick down to increase the purple shade of
the video image.
NOTE: Hue adjustment is available only for FPS,
MOBA/RTS, RPG, SPORTS mode.
40 | Operating the monitor
Icon Menu and
Submenus
Description
Saturation This feature can adjust the color saturation of the video
image.
Use the joystick to adjust the saturation from 0 to 100.
Move the joystick up to increase the colorful appearance of
the video image.
Move the joystick down to increase the monochrome
appearance of the video image.
NOTE: The Saturation adjustment is available only
when you select FPS, MOBA/RTS, SPORTS, or RPG
preset mode.
Reset Game Resets all settings under the Game menu to the factory
defaults.
Brightness/
Contrast
Adjusts the brightness and contrast of the display.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
75 %75 %
Brightness Brightness adjusts the luminance of the backlight
(minimum 0; maximum 100).
Move the joystick up to increase the brightness level.
Move the joystick down to decrease the brightness level.
Contrast Adjust the Brightness first, and then adjust Contrast only
if further adjustment is necessary.
Move the joystick up to increase contrast and Move the
joystick down to decrease contrast (between 0 and 100).
The Contrast function adjusts the degree of difference
between darkness and lightness on the monitor screen.
Operating the monitor | 41
Icon Menu and
Submenus
Description
Input Source Switch between the dierent video signals that may be
connected to your monitor.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
HDMI 1
DP
Auto Select
HDMI 2
Reset Input Source
On
DP Select DP input when you are using the DP (DisplayPort)
connector.
Press the joystick button to confirm the selection.
HDMI 1 Select the HDMI 1 or HDMI 2 input when you are using
the HDMI connector. Press the joystick button to confirm
the selection.
HDMI 2
Auto Select Turn on the function to allow the monitor to automatically
scan for available input sources. Press the joystick button
to confirm the selection.
Reset Input
Source
Resets your monitor’s Input Source settings to the
factory defaults.
Display Use the Display menu to adjust image.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
Input Color Format
Aspect Ratio
Reset Display
Sharpness 50
RGB
16:9
Aspect Ratio Adjust the ratio of width to height of an image to 16:9, 4:3,
or 5:4.
42 | Operating the monitor
Icon Menu and
Submenus
Description
Input Color
Format
Allows you to set the video input mode to:
•RGB: Select this option if your monitor is connected to
a computer or a media player that supports RGB output
using a DisplayPort or HDMI cable.
•YCbCr: Select this option if your media player supports
only YCbCr output.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
Input Color Format
Aspect Ratio
Reset Display
Sharpness YCbCr
RGB
Sharpness This feature can make the image look sharper or softer.
Move the joystick up and down to adjust the sharpness
from ‘0’ to ‘100’.
Reset Display Resets all settings under the Display menu to the factory
defaults.
Audio
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
Reset Audio
Volume 50
Volume Allows you to set the volume level of headphone output.
Use the joystick to adjust the volume level from 0 to 100.
Reset Audio Resets all settings under the Audio menu to the factory
defaults.
Operating the monitor | 43
Icon Menu and
Submenus
Description
Menu Select this option to adjust the settings of the OSD, such
as the languages of the OSD, the amount of time the menu
remains on screen, and so on.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
Transparency
Language
Reset Menu
Timer
20
English
20s
Language Set the OSD display to one of eight languages.
(English, Spanish, French, German, Brazilian Portuguese,
Russian, Simplified Chinese, or Japanese).
Transparency Select this option to change the menu transparency by
moving the joystick up or down (min. 0/max. 100).
Timer OSD Hold Time: Sets the length of time the OSD remains
active after you press a button.
Move the joystick to adjust the slider in 1-second
increments, from 5 to 60 seconds.
Reset Menu Resets all settings under the main Menu to the factory
defaults.
44 | Operating the monitor
Icon Menu and
Submenus
Description
Personalize
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
Shortcut Key 2
Shortcut Key 1
Shortcut Key 3
Dark Stabilizer
Preset Modes
Brightness/Contrast
Power Button LED On in On Mode
Reset Personalization
Shortcut key 1 Allows you to choose a feature from Preset Modes,
Game Enhance Mode, AMD FreeSync Premium, Dark
Stabilizer, Brightness/Contrast, Input Source, Aspect
Ratio or Volume and set it as a shortcut key.
Shortcut key 2
Shortcut key 3
Power Button
LED
Allows you to select On in On Mode, Off in On Mode or
Off in On/Standby Mode to set the power LED indicator
to save energy.
Reset
Persona-
lization
Resets all settings under the Personalize menu to the
factory defaults.
Operating the monitor | 45
Icon Menu and
Submenus
Description
Others Select this option to adjust the OSD settings suchas
DDC/CI, LCD conditioning, and so on.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
DDC/CI
Display Info
LCD Conditioning
On
Firmware 00X000
Service Tag ABCDEFG
Reset Others
Factory Reset
Select
Display Info Displays the monitor’s current settings.
DDC/CI DDC/CI (Display Data Channel/Command Interface)
allows you to adjust features such as brightness and color
balance of your monitor using software installed on your
computer. You can disable this feature by selecting Off.
Enable this feature for best user experience and optimum
performance of your monitor.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
DDC/CI
Display Info
LCD Conditioning
On
Firmware
Service Tag
Reset Others
Factory Reset
46 | Operating the monitor
Icon Menu and
Submenus
Description
LCD Condi-
tioning
Helps reduce minor cases of image retention. Depending on
the degree of image retention, the program may take some
time to run. You can enable this feature by selecting On.
Dell 27 Gaming Monitor
G2722HS
Menu
Personalize
Others
Brightness/Contrast
Game
Display
Input Source
Audio
DDC/CI
Display Info
LCD Conditioning On
Firmware
Service Tag
Reset Others
Factory Reset
Firmware Displays the firmware version of your monitor.
Service Tag Displays the Service Tag of your monitor. The Service
Tag is a unique alphanumeric identifier that allows Dell to
identify the product specifications and access warranty
information.
NOTE: The Service Tag is also printed on a label located
at the back of the cover.
Reset Others Resets all settings under the Others menu to the factory
defaults.
Factory Reset Restores all preset values to the factory default settings.
Operating the monitor | 47
OSD warning messages
When the monitor does not support a particular resolution mode, you can see the following
message:
Dell 27 Gaming Monitor
G2722HS
The current input timing is not supported by the monitor display. Please
change your input timing to
listed timing as per the monitor specifications.
1920x1080, 165Hz or any other monitor
This means that the monitor cannot synchronize with the signal that it is receiving from the
computer. See Monitor specifications for the horizontal and vertical frequency ranges
addressable by this monitor. The recommended mode is 1920 x 1080.
NOTE: The message that appears on the monitor varies based on the type
of input cable used.
You can see the following message before the DDC/CI function is disabled:
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes No
G2722HS
Dell 27 Gaming Monitor
When the monitor enters the Standby mode, the following message will appear:
G2722HS
Going into Standby mode…
Dell 27 Gaming Monitor
Activate the computer and wake up the monitor to gain access to the OSD.
When you increase the Brightness level above the factory default setting for the first time, the
following message appears:
48 | Operating the monitor
Yes No
G2722HS
Adjusting to this value will increase power consumption above the
default level. Do you want to continue?
Dell 27 Gaming Monitor
If you press any button other than the power button, the following messages will appear
depending on the selected input:
Dell 27 Gaming Monitor
G2722HS
No DP signal from your device.
Press any key on the keyboard or move the mouse or wake it up.
If there is no display, press the monitor button again to select the correct
input source.
If either DisplayPort, HDMI 1 and HDMI 2 input is selected and the corresponding cable is not
connected, a floating dialog box as shown below appears.
G2722HS
The display will go into Standby mode in 4 minutes.
www.dell.com/G2722HS
No DP Cable
Dell 27 Gaming Monitor
or
G2722HS
The display will go into Standby mode in 4 minutes.
No HDMI 1 Cable
Dell 27 Gaming Monitor
www.dell.com/G2722HS
or
Operating the monitor | 49
G2722HS
The display will go into Standby mode in 4 minutes.
No HDMI 2 Cable
Dell 27 Gaming Monitor
www.dell.com/G2722HS
When Factory Reset is selected, the following message appears:
Dell 27 Gaming Monitor
Yes No
G2722HS
Are you sure you want to reset to default settings?
See Troubleshooting for more information.
50 | Operating the monitor
Locking the rear-panel control buttons
You can lock the rear-panel control buttons to prevent access to the OSD menu and/or
power button.
1
2
3
4
5
To lock the button(s):
1. Press and hold Button 5 for four seconds, a menu appears on the screen.
2. Select one of the following options:
• Menu Buttons: Choose this option to lock all OSD menu buttons except the
power button.
• Power Button: Choose this option to lock the power button only.
• Menu + Power Buttons: Choose this option to lock all the buttons on the
rear-panel control.
To unlock the button(s), press and hold Button 5 for four seconds until a menu
appears on the screen. Select the Unlock icon to unlock the button(s).
Operating the monitor | 51
Setting the maximum resolution
To set the maximum resolution for the monitor:
In Windows 7, Windows 8 or Windows 8.1:
1. For Windows 8 or Windows 8.1 only, select the Desktop tile to switch to classic
desktop. For Windows Vista and Windows 7, skip this step.
2. Right-click on the desktop and click Screen Resolution.
3. Click the Dropdown list of the Screen Resolution and select 1920 x 1080.
4. Click OK.
In Windows 10 or Windows 11:
1. Right-click on the desktop and click Display settings.
2. In the Settings window, select Display.
3. If you have more than one monitor connected, ensure to select G2722HS.
4. Click the Display resolution dropdown list and select 1920 x 1080.
5. Click keep changes.
If you do not see 1920 x 1080 as an option, you may need to update your graphics
driver. Depending on your computer, complete one of the following procedures:
If you have a Dell desktop or portable computer:
• Go to https://www.dell.com/support, enter your service tag, and download
the latest driver for your graphics card.
If you are using a non-Dell computer :
• Go to your computer manufacturer’s support website and download the latest
graphic drivers.
• Go to your graphics card manufacturer’s website and download the latest graphic
drivers.
52 | Troubleshooting
Troubleshooting
WARNING: Before you begin any of the procedures in this section, follow
the Safety instructions.
Self-test
Your monitor provides a self-test feature that allows you to check whether your
monitor is functioning properly. If your monitor and computer are properly connected
but the monitor screen remains dark, run the monitor self-test by performing the
following steps:
1. Turn o both your computer and the monitor.
2. Unplug the video cable from the back of the computer. To ensure proper self-
test operation, remove all digital and the analog cables from the back of
computer.
3. Turn on the monitor.
The floating dialog box should appear on-screen (against a black background), if the
monitor cannot sense a video signal and is working correctly. While in self-test mode,
the power LED remains white. Also, depending upon the selected input, one of the
dialogs shown below will continuously scroll through the screen.
G2722HS
The display will go into Standby mode in 4 minutes.
www.dell.com/G2722HS
No DP Cable
Dell 27 Gaming Monitor
or
G2722HS
The display will go into Standby mode in 4 minutes.
No HDMI 1 Cable
Dell 27 Gaming Monitor
www.dell.com/G2722HS
or
Troubleshooting | 53
G2722HS
The display will go into Standby mode in 4 minutes.
No HDMI 2 Cable
Dell 27 Gaming Monitor
www.dell.com/G2722HS
4. This box also appears during normal system operation if the video cable becomes
disconnected or damaged.
5. Turn o your monitor and reconnect the video cable; then turn on both your
computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your
video controller and computer, because your monitor is functioning properly.
54 | Troubleshooting
Built-in diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the screen
abnormality you are experiencing is an inherent problem with your monitor, or with your
computer and video card.
1
2
3
4
5
To run the built-in diagnostics:
1. Ensure that the screen is clean (no dust particles on the surface of the screen).
2. Unplug the video cable(s) from the back of the computer or monitor. The monitor
then goes into the self-test mode.
3. Press and hold Button 5 for four seconds until a menu appears on the screen.
4. Using the joystick control, highlight the Diagnostics option and press the
joystick button to start the diagnostics. A gray screen is displayed.
5. Observe if the screen has any defects or abnormalities.
6. Toggle the joystick once again until a red screen is displayed.
7. Repeat steps 5 and 6 until the screen displays in green, blue, black, white, and
text screens.
The test is complete when the text screen appears. To exit, toggle the joystick control
again. If you do not detect any screen abnormalities upon using the built-in diagnostic
tool, the monitor is functioning properly. Check the video card and computer.
Troubleshooting | 55
Common problems
The following table contains general information about common monitor problems you
might encounter and the possible solutions:
Common
Symptoms
What You
Experience
Possible Solutions
No Video/
Power LED off No picture •Ensure that the video cable connecting the
monitor and the computer is properly connected
and secure.
•Verify that the power outlet is functioning
properly using any other electrical equipment.
•Ensure that the power button is depressed fully.
•Ensure that the correct input source is selected
in the Input Source menu.
No Video/
Power LED on No picture or no
brightness •Increase brightness and contrast controls via
OSD.
•Perform monitor self-test feature check.
•Check for bent or broken pins in the video cable
connector.
•Run the built-in diagnostics.
•Ensure that the correct input source is selected
in the Input Source menu.
Missing Pixels LCD screen has
spots •Turnoffthemonitorandturnitonagain.
•Pixelthatispermanentlyoffisanaturaldefect
that can occur in LCD technology.
•FormoreinformationonDellMonitorQuality
and Pixel Policy, see Dell Support site at:
https://www.dell.com/pixelguidelines.
Stuck-on Pixels LCD screen has
bright spots •Turnoffthemonitorandturnitonagain.
•Pixelthatispermanentlyoffisanaturaldefect
that can occur in LCD technology.
•FormoreinformationonDellMonitorQuality
and PixelPolicy, see Dell Support site at:
https://www.dell.com/pixelguidelines.
Brightness
Problems Picture too dim
or too bright •Reset the monitor to factory settings.
•Adjust brightness and contrast controls via OSD.
Safety Related
Issues Visible signs of
smoke or sparks •Do not perform any troubleshooting steps.
•Contact Dell immediately.
Intermittent
Problems Monitor
malfunctions on
& off
•Ensure that the video cable connecting the
monitor to the computer is connected properly
and is secure.
•Resetthemonitortofactorysettings.
•Invoke the self-test feature (see Self-test) to
determine if the intermittent problem is agged
in the self-test mode.
56 | Troubleshooting
Common
Symptoms
What You
Experience
Possible Solutions
Missing Color Picture missing
color •Perform monitor self-test feature check.
•Ensure that the video cable connecting the
monitor to the computer is connected properly
and is secure.
•Check for bent or broken pins in the video cable
connector.
Wrong Color Picture color
not good •Change the settings of the Preset Modes
in the Game menu OSD depending on the
application.
•Adjust the Gain/Oset/Hue/Saturation
values under Custom Color in the Game menu
OSD.
•Change the Input Color Format to RGB or
YCbCr/YPbPr in the Color menu OSD.
•Run the built-in diagnostics.
Image retention
from a static
image left on
the monitor for
a long period of
time
Faint shadow
from the static
image displayed
appears on the
screen
•Set the screen to turn o after a few minutes
of screen idle time. These can be adjusted in
Windows Power Options or Mac Energy Saver
setting.
•Alternatively, use a dynamically changing
screensaver.
Troubleshooting | 57
Product specific problems
Problem What you
experience
Possible solutions
Screen image is
too small Image is
centered on
screen, but
does not fill
entire viewing
area
•Check the Aspect Ratio setting in the Display
menu OSD.
•Reset the monitor to factory settings.
Cannot adjust
the monitor
with the
buttons on the
front panel
OSD does not
appear on the
screen
•Turn o the monitor, unplug the power cable,
plug it back, and then turn on the monitor.
•The OSD menu may be locked. Press and hold
the fourth button (the Brightness/Contrast
shortcut key by default) below the joystick
button for 4 seconds to unlock.
No Input Signal
when user
controls are
pressed
No picture, the
LED light is
white
•Check the signal source. Ensure the computer
is not in the power saving mode by moving the
mouse or pressing any key on the keyboard.
•Check whether the signal cable is plugged in
properly. Reconnect the signal cable if necessary.
•Reset the computer or video player.
The picture
does not fill the
entire screen
The picture
cannot fill the
height or width
of the screen
•Due to dierent video formats (aspect ratio) of
DVDs, the monitor may display in full screen.
•Run the built-in diagnostics.
58 | Appendix
Appendix
FCC notices (U.S. only) and other regulatory
information
For FCC notices and other regulatory information, see the regulatory compliance
website located at https://www.dell.com/regulatory_compliance.
Contacting Dell
For customers in the United States, call 800-WWW-DELL (800-999-3355).
NOTE: If you do not have an active Internet connection, you can find
contact information on your purchase invoice, packing slip, bill, or Dell
product catalog.
Dell provides several online and telephone-based support and service options.
Availability varies by country and product, and some services may not be available in
your area.
To get online monitor support content:
See https://www.dell.com/support/monitors.
To contact Dell for sales, technical support, or customer service issues:
1. Go to https://www.dell.com/support.
2. Verify your country or region in the Choose A Country/Region drop-down menu
at the bottom-right corner of the page.
3. Click Contact Us next to the country dropdown.
4. Select the appropriate service or support link based on your need.
5. Choose the method of contacting Dell that is convenient for you.
EU product database for energy label and product
information sheet
G2722HS: https://eprel.ec.europa.eu/qr/1032549