Table of Contents
- Package_Contents0
- Identifying
- Front_View
- Back_View
- Bottom_View
- flat_panel1
- resolution1
- preset0
- electrical1
- physical1
- environmental1
- Power
- pin
- plug_and_play_capability0
- 1053639
- 1053733
- 1053776
- 1053811
- 1053838
- 1053904
- 1053963
- QualityandPixelPolicy
- Maintenance
- Cleaning
- 156612
- 156613
- Attaching_the_Stand
- Connecting_Your_Monitor
- Organizing_Your_Cables
- Removing_the_Stand
- Wall_Mounting_(Optional)_
- Using_the_Front_Panel
- Accessing_the_Menu_System
- Auto_Adjust
- Input_Source
- Color_Settings
- warning
- Setting_the_Optimal_Resolution
- Using_the_Tilt
- Tilt
- Solving_Problems
- Common_Problems
- Product_Specific_Problems
- Soundbar_(Optional)_Troubleshooting
- FCC_Notice
- Contacting_Dell0
- Contacting_Dell2
- 1056891
DELL P2014H User Manual
Displayed below is the user manual for P2014H by DELL which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Model No.: P2014H
Regulatory model: P2014Ht
User’s Guide
DELL P2014H
Contents 3
NOTE: A NOTE indicates important information that helps you make
better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss
of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage,
personal injury, or death.
© 2013 Dell Inc. All rights reserved.
Information in this document is subject to change without notice.
Reproduction of these materials in any manner whatsoever without the
written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell™, the DELL logo, and Inspiron™ are
trademarks of Dell Inc.; Intel®, Centrino®, Core™, and Atom™ are either
trademarks or registered trademarks of Intel Corporation in the U.S. and
other countries; Microsoft®, Windows®, and Windows start button logo
are either trademarks or registered trademarks of Microsoft Corporation
in the United States and/or other countries; Bluetooth® is a registered
trademark owned by Bluetooth SIG, Inc. and is used by Dell under license;
Blu-ray Disc™ is a trademark owned by the Blu-ray Disc Association(BDA)
and licensed for use on discs and players; Other trademarks and trade
names may be used in this document to refer to either the entities
claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
2013 – 08 Rev. A01
Contents
About Your Monitor..........................................................................6
Package Contents...........................................................................................6
Product Features.............................................................................................8
Identifying Parts and Controls.....................................................................9
Front View.............................................................................................................9
Back View.............................................................................................................10
Side View..............................................................................................................11
Bottom View........................................................................................................11
Monitor Specifications..................................................................................12
Flat-Panel Specifications..................................................................................12
Resolution Specifications.................................................................................13
Video Supported Modes....................................................................................13
Preset Display Modes.........................................................................................13
Electrical Specifications....................................................................................13
Physical Characteristics....................................................................................14
Environmental Characteristics........................................................................14
Power Management Modes.............................................................................15
Pin Assignments.................................................................................................16
Plug and Play Capability..............................................................................18
Universal Serial Bus (USB) Interface..........................................................19
LCD Monitor Quality and Pixel Policy.......................................................21
Maintenance Guidelines..............................................................................21
Cleaning Your Monitor......................................................................................21
Setting Up the Monitor...................................................................22
Attaching the Stand...................................................................................22
Connecting Your Monitor.......................................................................22
Organizing the Cables..............................................................................24
Attaching the Cable Cover......................................................................25
Removing the Stand..................................................................................25
Wall Mounting(Optional).........................................................................26
Operating the Monitor...................................................................27
Power on the monitor..................................................................................27
Using the Front Panel Controls..................................................................27
Using the On-Screen Display (OSD) Menu...............................................29
OSD Warning Messages....................................................................................42
Setting the Maximum Resolution..............................................................43
Using the Tilt, Swivel, and Vertical Extension..........................................44
Tilt,Swivel.............................................................................................................44
Vertical Extension...............................................................................................45
Rotating the Monitor.....................................................................................46
4 Contents Contents 5
Adjusting the Rotation Display Settings of Your System .......................47
Troubleshooting..............................................................................48
Self-Test...........................................................................................................48
Built-in Diagnostics.......................................................................................49
Common Problems .......................................................................................50
Product Specific Problems ..........................................................................55
Universal Serial Bus(USB) Specific Problems...........................................56
Appendix...........................................................................................57
WARNING: Safety Instructions....................................................................57
FCC Notices (U.S. Only) and Other Regulatory Information.................57
Contacting Dell..............................................................................................57
Setting Up Your Monitor................................................................58
Setting the display resolution to 1600 x 900 (maximum)...................58
If you have a Dell desktop or a Dell portable computer with internet
access..............................................................................................................59
If you have non Dell desktop, portable computer, or graphic card....60
Procedure on setting up dual monitors in Windows Vista, Windows 7 and
Windows 8...........................................................................................61
6 About Your Monitor About Your Monitor 7
• PowerCable(variesby
countries)
• VGACable
• DisplayPortCable
• USBUpstreamCable
(enablestheUSBports
onthemonitor)
• Driversand
DocumentationMedia
• QuickSetupGuide
• ProductandSafety
InformationGuide
About Your Monitor
Package Contents
Your monitor ships with the components shown below. Ensure that you have
received all the components and contact Dell if something is missing.
NOTE: Some items may be optional and may not ship with your monitor.
Some features or media may not be available in certain countries.
NOTE: To set up with any other stand, please refer to the respective
stand setup guide for setup instructions.
• Monitor
• Stand
• CableCover
8 About Your Monitor About Your Monitor 9
Identifying Parts and Controls
Front View
Front View Front panel controls
Label Description
1. Function buttons (For more information, see Operating the Monitor)
2. Power On/O button (with LED indicator)
Product Features
The Dell P2014H flat panel display has an active matrix, thin-film transistor
(TFT), liquid crystal display (LCD), and LED backlight. The monitor features
include:
• 49.41 cm (19.5 inch) active area display (Measured diagonally) 1600 x 900
resolution, plus full-screen support for lower resolutions.
• Tilt, swivel, vertical extension and rotate adjustment capabilities.
• Removable pedestal and Video Electronics Standards Association
(VESA™) 100 mm mounting holes for flexible mounting solutions.
• Plug and play capability if supported by your system.
• On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
• Software and documentation media includes an information file
(INF), Image color Matching File (ICM), Dell Display Manager software
application and product documentation. Dell Display Manager included
(comes in the CD attached with the monitor).
• Security lock slot.
• Stand lock.
• Asset Management Capability.
• Energy Star Compliant.
• EPEAT Gold Compliant.
• RoHS compliant.
• BFR/PVC- reduced.
• Arsenic-Free glass and Mercury Free for Panel only.
• Energy Gauge shows the energy level being consumed by the monitor in
real time.
• TCO Certified Displays.
10 About Your Monitor About Your Monitor 11
Side View
Bottom View
Bottom view
Label Description Use
1. AC power connector To connect the monitor power cable.
2. DP connector Connect your computer DP cable.
3 DVI connector To connect your computer to the monitor
using a DVI cable.
4 VGA connector To connect your computer to the monitor
using a VGA cable.
5 USB upstream port Connect the USB cable that came with your
monitor to the monitor and the computer.
Once this cable is connected, you can use the
USB connectors on the monitor.
Back View
Back view Back view with monitor stand
Label Description Use
1 VESA mounting holes (100
mm x 100 mm - behind
attached VESA Cover)
Wall mount monitor using VESA-
compatible wall mount kit (100 mm x
100 mm).
2 Regulatory label Lists the regulatory approvals.
3 Security lock slot Use a security lock to secure the
monitor. (security lock not included).
4 Barcode serial number
label Refer to this label if you need to contact
Dell for technical support.
5 Stand release button Release stand from monitor.
6 Dell Soundbar mounting
slots Attaches the optional Dell Soundbar.
7 Cable management slot Use to organize cables by placing them
through the slot.
12 About Your Monitor About Your Monitor 13
Video Supported Modes
Video display capabilities
(DVI playback) 480p, 576p, 720p, 1080p and 1080i
Preset Display Modes
Display Mode Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(Horizontal/
Vertical)
720 x 400
31.5
70.0
28.3
-/+
640 x 480 31.5 60.0 25.2 -/-
640 x 480 37.5 75.0 31.5 -/-
800 x 600 37.9 60.0 40.0 +/+
800 x 600
46.9
75.0
49.5
+/+
1024 x 768
48.4
60.0
65.0
-/-
1024 x 768
60.0
75.0
78.8
+/+
1152 x 864 67.5 75.0 108.0 +/+
1280 x 1024 64.0 60.0 108.0 +/+
1280 x 1024 80.0 75.0 135.0 +/+
1600 x 900
60.0
60.0
97.75
+/-
Electrical Specifications
Video input signals • Analog RGB, 0.7 Volts +/-5%, positive
polarity at 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each
differential line, positive polarity at 50 ohm
input impedance
• DP 1.2 signal input support
Synchronization input
signals Separate horizontal and vertical
synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
AC input voltage/
frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.5 A (Max.)
Inrush current 120 V:30 A (Max.)
240 V:60 A (Max.)
6 USB downstream
port Connect your USB device. You can only use
this connector after you have connected the
USB cable to the computer and USB upstream
connector on the monitor.
7 Stand lock To disable the stand release button and lock
the stand assembly using an M3 X 6 mm screw
(screw not included).
Monitor Specifications
Flat Panel Specifications
Screen type Active matrix - TFT LCD
Panel type In plane switching
Viewable image dimensions
Diagonal
Horizontal Active Area
Vertical Active Area
Area
49.41 cm (19.5 inches )
433.92 mm (17.08 inches)
236.34 mm (9.30 inches)
102552.65 mm2 (158.96 inch2)
Pixel pitch 0.2712 (H) mm x 0.2626 (V) mm
Viewing angle 178° (vertical) typ, 178° (horizontal) typical
Luminance output 250 cd/m²(typical)
Contrast ratio 1000:1 (typical)
Faceplate coating AG type,Haze 25%, hard-coating 3H
Backlight LED edgelight system
Response Time 8ms Typ. g-to-g with OD
Color depth 16.7 million colors
Color gamut (Typical) 83%* (CIE1976)
*[P2014Ht] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%)
test standards.
Resolution Specifications
Horizontal scan range 30 kHz to 83 kHz (automatic)
Vertical scan range 56 Hz to 76 Hz (automatic)
Maximum resolution 1600 x 900 at 60 Hz
14 About Your Monitor About Your Monitor 15
Humidity
Operating 10% to 80% (non-condensing)
Non-operating Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
Altitude
Operating 5,000 m (16,400 ft) max
Non-operating 12191.41 m (40,000 ft) max
Thermal dissipation 122.84 BTU/hour (maximum)
68.24 BTU/hour (typical)
Power Management Modes
If you have VESA’s DPM™ compliance display card or software installed
in your PC, the monitor can automatically reduce its power consumption
when not in use. This is referred to as Power Save Mode. If the computer
detects input from keyboard, mouse, or other input devices, the monitor
automatically resumes functioning. The following table shows the power
consumption and signaling of this automatic power saving feature:
VESA
Modes
Horizon-
tal Sync
Ver-
tical
Sync
Video Power
Indicator
Power Consump-
tion
Normal
operation
Active Active Active White 20W(typical)
36W(maximum)
Active-o
mode
Inactive Inactive Blanked Glowing
White
Lessthan0.3W
Switcho - - - O Lessthan0.3W
The OSD function will only in the normal operation mode. When any
button is pressed in Active-o mode, the following message will be
displayed:
Physical Characteristics
Connector type 15-pinD-subminiature,blueconnec-
tor;DVI-D,whiteconnector;DP,black
connector
Signalcabletype Digital:Detachable,DVI-D,Solidpins.
Analog:Detachable,D-Sub,15pins
Dimensions(withstand)
Height(extended) 467.9mm(18.42inches)
Height(compressed) 354.2mm(13.94inches)
Width 470.5mm(18.52inches)
Depth 180.0mm(7.09inches)
Dimensions(withoutstand)
Height 272.9mm(10.74inches)
Width 470.5mm(18.52inches)
Depth 46.5mm(1.83inches)
Standdimensions
Height(extended) 399.7mm(15.74inches)
Height(compressed) 354.2mm(13.94inches)
Width 225.0mm(8.86inches)
Depth 180.0mm(7.09inches)
Weight
Weightwithpackaging 6.17kg(13.57lb)
Weightwithstandassemblyand
cables 4.58kg(10.08lb)
Weightwithoutstandassembly
(ForwallmountorVESAmount
considerations-nocables)
2.48kg(5.46lb)
Weightofstandassembly 1.87kg(4.11lb)
Environmental Characteristics
Temperature
Operating 0 °C to 40 °C
Non-operating Storage: -20 °C to 60°C (-4 °F to 140 °F)
Shipping: -20 °C to 60°C (-4 °F to 140 °F)
16 About Your Monitor About Your Monitor 17
DVIConnector
Pin Number 24-pin Side of the Connected Signal Cable
1 TMDS RX2-
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating
9 TMDS RX1-
10 TMDS RX1+
11 TMDS Ground
12 Floating
13 Floating
14 +5V/+3.3V power
15 Self test
16 Hot Plug Detect
17 TMDS RX0-
18 TMDS RX0+
19 TMDS Ground
20 Floating
21 Floating
22 TMDS Ground
23 TMDS Clock+
24 TMDS Clock-
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR®-compliant.
NOTE: Zero power consumption in OFF mode can only be achieved by
disconnecting the main cable from the monitor.
Pin Assignments
VGA Connector
Pin Number 15-pin Side of the Connected Signal Cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
7 GND-G
8 GND-B
9 Computer 5V/3.3V
10 GND-sync
11 GND
12 DDC data
13 H-sync
14 V-sync
15 DDC clock
18 About Your Monitor About Your Monitor 19
Display Identification Data (EDID) using Display Data Channel (DDC)
protocols so the system can configure itself and optimize the monitor
settings. Most monitor installations are automatic; you can select dierent
settings if desired. For more information about changing the monitor settings,
see Operating the Monitor.
Universal Serial Bus (USB) Interface
This section gives you information about the USB ports that are available on
the monitor.
NOTE: This monitor supports High-Speed Certified USB 2.0 interface.
Transfer Speed DataRate Power Consumption
Highspeed 480Mbps 2.5W(Max,eachport)
Fullspeed 12Mbps 2.5W(Max,eachport)
Lowspeed 1.5Mbps 2.5W(Max,eachport)
USB Upstream Connector
Pin Number 4-pin Side of the Connector
1DMU
2VCC
3 DPU
4GND
DisplayportConnector
Pin Number 20-pin Side of the ConnectedSignal Cable
1 ML0(p)
2 GND
3 ML0(n)
4 ML1(p)
5 GND
6 ML1(n)
7 ML2(p)
8 GND
9 ML2(n)
10 ML3(p)
11 GND
12 ML3(n)
13 GND
14 GND
15 AUX(p)
16 GND
17 AUX(n)
18 HPD
19 Re-PWR
20 PWR
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The
monitor automatically provides the computer system with its Extended
20 About Your Monitor Setting Up the Monitor 21
LCD Monitor Quality and Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one
or more pixels to become fixed in an unchanging state which are hard to see
and do not aect the display quality or usability. For more information on Dell
Monitor Quality and Pixel Policy, see Dell Support site at
http://www.dell.com/support/monitors.
Maintenance Guidelines
Cleaning Your Monitor
WARNING: Readandfollowthesafetyinstructionsbeforecleaningthe
monitor.
WARNING: Beforecleaningthemonitor,unplugthemonitorpower
cablefromtheelectricaloutlet.
For best practices, follow the instructions in the list below while unpacking,
cleaning, or handling your monitor:
• To clean your antistatic screen, lightly dampen a soft, clean cloth with
water. If possible, use a special screen-cleaning tissue or solution suitable
for the antistatic coating. Do not use benzene, thinner, ammonia,
abrasive cleaners, or compressed air.
• Use a lightly-dampened, warm cloth to clean the monitor. Avoid using
detergent of any kind as some detergents leave a milky film on the
monitor.
• If you notice white powder when you unpack your monitor, wipe it o
with a cloth.
• Handle your monitor with care as dark-colored monitors may scratch
and show white scu marks more than light-colored monitors.
• To help maintain the best image quality on your monitor, use a
dynamically changing screen saver and turn o your monitor when not in
use.
USB Downstream Connector
Pin Number 4-pin Side of the Connector
1VCC
2DMD
3 DPD
4GND
USB Ports
•1upstream-back
•4downstream-back
NOTE: USB 2.0 functionality requires a USB 2.0-capable computer.
NOTE: The monitor’s USB interface works only when the monitor is On
or in the power save mode. If you turn O the monitor and then turn it
On, the attached peripherals may take a few seconds to resume normal
functionality.
22 Setting Up the Monitor Setting Up the Monitor 23
Connecting the White DVI Cable
Connecting the Blue VGA Cable
Connecting the black DisplayPort Cable
CAUTION: The graphics are used for the purpose of illustration only.
Appearance of the computer may vary.
Setting Up the Monitor
Attaching the Stand
NOTE: The stand is detached from monitor when it is shipped from the
factory.
NOTE: This is applicable for a monitor with a stand. When any other
stand is bought, please refer to the respective stand setup guide for set
up instructions.
To attach the monitor stand:
1. Remove the cover and place the monitor on it.
2. Fit the two tabs on the upper part of the stand to the groove on the
back of the monitor.
3. Press the stand till it snaps into its place.
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section,
follow the Safety Instructions.
To connect your monitor to the computer:
1. Turn o your computer anddisconnect the power cable.
2. Connect either the white (digital DVI-D) or the blue (analog
VGA) display connector cable or the black( DisplayPort) to the
corresponding video port on the back of your computer.Do not
connect both cables on the same computer. Use both the cables
only when they are connected to two dierent computers with
appropriate video systems.
24 Setting Up the Monitor Setting Up the Monitor 25
Attaching the Cable Cover
Removing the Stand
NOTE: To prevent scratches on the LCD screen while removing the
stand,ensure that the monitor is placed on a clean surface.
NOTE: This is applicable for a monitor with a stand. When any other
stand is bought, please refer to the respective stand setup guide for
set up instructions.
To remove the stand:
1. Place the monitor on a at surface.
2. Press and hold the stand release button.
3. Lift the stand up and away from the monitor.
Connecting the USB Cable
After you have completed connecting the DVI/VGA/DisplayPort cable,
follow the procedures below to connect the USB cable to the computer and
complete your monitor setup:
1. Connect the upstream USB port (cable supplied) to an appropriate USB
port on your computer. (See bottom view for details.)
2. Connect the USB peripherals to the downstream USB ports on the
monitor.
3. Plug the power cables for your computer and monitor into a nearby outlet.
4. Turn on the monitor and the computer.If your monitor displays an image,
installation is complete. If it does not display an image, see Solving Problems.
5. Use the cable slot on the monitor stand to organize the cables.
Organizing the Cables
After attaching all necessary cables to your monitor and computer, (See
Connecting Your Monitor for cable attachment,) use the cable management
slot toorganize all cables as shown above.
26 Operating the Monitor Operating the Monitor 27
Operating the Monitor
Power On the Monitor
Press the button to turn on the monitor
Using the Front Panel Controls
Use the control buttons on the front of the monitor to adjust the
characteristics of the image being displayed. As you use these buttons to
adjust the controls, an OSD shows the numeric values of the characteristics
as they change.
The following table describes the front panel buttons:
Wall Mounting (Optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible wall
mounting kit.
1. Place the monitor panel on a soft cloth or cushion on stable at table.
2. Remove the stand.
3. Use a screwdriver to remove the four screws securing the plastic cover.
4. Attach the mounting bracket from the wall mounting kit to the LCD.
5. Mount the LCD on the wall by following the instructions that came with
the wall mounting kit.
NOTE: For use only with UL Listed Wall Mount Bracket with minimum
weight/load bearing capacity of 2.48 kg.
28 Operating the Monitor Operating the Monitor 29
Front Panel Button
Use the buttons on the front of the monitor to adjust the image settings.
Front panel Button Description
1
Up
Use the Up key to adjust (increase ranges) items in the
OSD menu.
2
Down
Use the Down key to adjust (decrease ranges) items in
the OSD menu.
3
OK
Use the OK key to conrm your selection.
4
Back
Use the Back key to go back to the previous menu.
Front panel Button Description
1
Shortcut key/ Preset
Modes
Use this button to choose from a list of preset
color modes.
2
Shortcut key /
Brightness/Contrast
Use this button to directly access the “Brightness/
Contrast“ menu.
3
Menu
Use the MENU button to launch the on-screen
display (OSD) and select the OSD Menu. See
Accessing the Menu System.
4
Exit
Use this button to go back to the main menu or
exit the OSD main menu.
5
Power
(with power light
indicator)
Use the Power button to turn the monitor on and
o.
The Blue LED indicates the monitor is on and fully
functional. An amber LED indicates DPMS power
save mode.
30 Operating the Monitor Operating the Monitor 31
Icon Menu and
Submenus Description
Energy Use This meter shows the energy level being consumed
by the monitor in real time.
Brightness/
Contrast
Use this menu to activate Brightness/Contrast
adjustment.
Brightness Brightness adjusts the luminance of the backlight.
Press the button to increase brightness and
Press the button to decrease brightness (min 0 ~
max 100).
NOTE: Brightness control will be greyed out during
“Screen dim” in PowerNap option when screen
saver is activated.
Contrast Adjust Brightness first, and then adjust Contrast only
if further adjustment is necessary.
Press the button to increase contrast and Press
the button to decrease contrast (min 0 ~ max
100).
The Contrast function adjusts the degree of
dierence between darkness and lightness on the
monitor screen.
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: Ifyou change the settings and then either proceed to another
menu or exit the OSD menu, the monitor automatically saves those
changes.The changes are also saved if you change the settings and
then wait for the OSD menu to disappear.
1. Press the MENU button to launch the OSD menu and display the main
menu.
NOTE: Auto adjust is only available when you use the analog (VGA)
connector.
2. Press the and buttons to move between the setting options. As
you move from one icon to another, the option name is highlighted. See
the following table for a complete list of all the options available for the
monitor.
NOTE: Auto adjust is only available when you use the analog (VGA)
connector.
3. Press the or button once to activate the highlighted option.
4. Press the and buttons to select the desired parameter.
5. Press to enter the slide bar and then use the or button,
according to the indicators on the menu, to make your changes.
6. Press the button once to return to the main menu to select another
option or press the button two or three times to exit from the OSD
menu.
32 Operating the Monitor Operating the Monitor 33
Input source Use the Input source menu to select between
dierent video signals that may be connected to
your monitor.
Auto Select Select Auto Select to scan for available input signals.
VGA Select VGA input when you are using the analog
(VGA) connector. Press to select the VGA input
source.
DVI-D Select DVI-D input when you are using the Digital
(DVI) connector. Press to select the DVI input
source.
DisplayPort Select DisplayPort input when you are using the
DisplayPort(DP) connector. Press to select the
DisplayPort input source.
Auto adjust Even though your computer recognizes your
monitor on startup, the Auto Adjustment function
optimizes the display settings for use with your
particular setup.
Auto Adjustment allows the monitor to self-adjust
to the incoming video signal. After using Auto
Adjustment, you can further tune your monitor by
using the Pixel Clock and Phase controls under
Displays Settings.
The following dialog appears on a black screen as
the monitor automatically adjusts to the current
input:
NOTE: In most cases,Auto Adjust produces the
best image for your configuration.
NOTE: Auto adjust option is only available when
you are using the analog (VGA) connector.
34 Operating the Monitor Operating the Monitor 35
Preset Mode Allows you to choose from a list of preset color
modes.
• Standard: Loads the monitor’s default color
settings. This is the default preset mode.
• Multimedia: Loads color settings ideal for
multimedia applications.
• Movie: Loads color settings ideal for movies.
• Game: Loads color settings ideal for most
gaming applications.
• Text: Loads color settings ideal for oce
• Warm: Increases the color temperature. The
screen appears warmer with a red/yellow tint.
• Cool: Decreases the color temperature. The
screen appears cooler with a blue tint.
• Custom Color: Allows you to manually adjust
the color settings. Press the and buttons
to adjust the Red, Green, and Blue values and
create your own preset color mode.
Color Settings Use the Color Settings menu to adjust the
monitor’s color settings .
Input Color
Format
Allows you to set the video input mode to.
• RGB: Select this option if your monitor is
connected to a computer or DVD player using
the VGA and DVI cable or the HDMI to DVI
adapter.
• YPbPr: Select this option if your DVD player
supports only YPbPr output.
36 Operating the Monitor Operating the Monitor 37
DISPLAY
SETTINGS
Use the Display Settings to adjust image.
Wide Mode Adjust the image ratio to Wide 16:9, 4:3, 5:4.
Horizontal
Position Use the and buttons to adjust image left and
right. Minimum is ‘0’ (-). Maximum is ‘100’ (+).
NOTE: When usinga DVI source, the Horizontal
Position setting is not available.
Vertical
Position Use the and buttons to adjust image up and
down. Minimum is ‘0’ (-). Maximum is ‘100’ (+).
NOTE: When usinga DVI source, the Vertical
Position setting is not available.
Sharpness This feature can make the image look sharper or
softer. Use or to adjust the sharpness from
‘0’ to ‘100’.
Pixel Clock The Phase and Pixel Clock adjustments allow you to
adjust your monitor to your preference.
Use the and buttons to adjust for best image
quality.
Phase If satisfactory results are not obtained using the
Phase adjustment, use the Pixel Clock (coarse)
adjustment and then use Phase (fine), again.
NOTE: Pixel Clock and Phase Adjustments are only
available for “VGA” input.
Dynamic Contrast Dynamic Contrast adjusts the contrast ratio to 2,000,000 : 1.
Push the button to select the Dynamic Contrast “On” or
“O” .
Reset Display
Settings Select this option to restore default display settings.
Image
Enhance
Which can automatically sharpen images, enhance
hues and boost color contrast.
To enhance image clarity.
NOTE: Image Enhance is only available for Standard,
Multimedia, Movie and Game mode.
Hue This feature can shift color of video image to green
or purple. This is used to adjust the desired flesh
tone color. Use or to adjust the hue from ‘0’
to ‘100’ .
Press to increase the green shade of the video
image.
Press to increase the purple shade of the video
image.
NOTE: Hue adjustment is available only for Movie
and Game mode.
Saturation This feature can adjust the color saturation of the
video image. Use or to adjust the saturation
from ‘0’ to ‘100’.
Press to increase the monochrome appearance
of the video image.
Press to increase the colorful appearance of the
video image.
NOTE: Saturation adjustment is available only for
video input.
Reset Color
Settings
Resets your monitor’s color settings to the factory
defaults.
38 Operating the Monitor Operating the Monitor 39
MENU
SETTINGS
Language Language option to set the OSD display to one
of eight languages (English, Espanol, Francais,
Deutsch, Brazilian Portuguese, Russian, Simplified
Chinese or Japanese).
Transparency This function is used to change the OSD
background from opaque to transparent.
Timer OSD Hold Time: Sets the length of time the OSD
will remain active after the last time you pressed a
button.
Use the and buttons to adjust the slider in 1
second increments, from 5 to 60 seconds.
Lock Controls user access to adjustments. When Lock
is selected, no user adjustments are allowed. All
buttons are locked.
NOTE:
Lock function – Either soft lock (through OSD
menu) or hard lock (Press and hold the button
above power button for 10 sec)
Unlock function– Only hard unlock (Press and hold
the button above power button for 10 sec)
Reset Menu
Settings
Select this option to restore default Menu settings.
ENERGY
SETTINGS
Power Button
LED
Allows you to set the power LED indicator on or o
to save energy.
Energy Smart To turn on or o dynamic dimming.
Energy Smart turned “on” will activate the dynamic
dimming. With Energy Smart turned on, the monitor
will consume overall less power compared to when
Energy Smart is turned “o”.
NOTE: Under Energy Smart mode, the energy
usage bar will decrease when transitioning from
bright scenes to darker scenes. The energy usage
bar will increase when transitioning from dark
scenes to bright scenes.
USB System
Monitor status ON Standby OFF
Monitor with
upstream
connected
ON
(Disbled)
ON
(Disbled)
OFF
(Disbled)
Monitor without
upstream
connected
ON OFF/ON*
(depends on
OSD selections) OFF
Reset Energy
Settings
Select this option to restore default Energy Settings.
40 Operating the Monitor Operating the Monitor 41
LCD
Conditioning
Helps reduce minor cases of image retention.
Depending on the degree of image retention,
the program may take some time to run. You can
enable this feature by selecting “Enable”.
Reset Other
Settings
Select this option to restore default other settings,
such as DDC/CI.
Factory
Reset
Reset all OSD settings tothe factory preset values.
Personalize User can select from Preset Modes, Brightness/
Contrast, Auto Adjust, Input Source, Aspect Ratio
and set as shortcut key.
Reset
Personalization
Allows you to restore shortcut key to the default
setting.
Other Settings Select this option to adjust the settings of the OSD,
such as, the languages of the OSD, the amount of
time the menu remains on screen, and so on.
DDC/CI DDC/CI (Display Data Channel/Command
Interface) allows your monitor parameters
(brightness, color balance etc) to be adjustable via
software on your computer. You can disable this
feature by selecting “Disable”.
Enable this feature for best user experience and
optimum performance of your monitor.
42 Operating the Monitor Operating the Monitor 43
If you press any button other than the power button one of the following
messages will appear depending on the selected input:
If either VGA or DVI-D or DP input is selected and both VGA and DVI-D and
DP cables are not connected, a floating dialog box as shown below appears.
or
or
See Solving Problems for more information.
Setting the Maximum Resolution
In Windows Vista®, Windows® 7 or Windows® 8:
1. For Windows® 8 only, select the Desktop tile to switch to classic desktop.
2. Right-click on the desktop and click Screen resolution.
3. Click the Dropdown list of the Screen resolution and select 1600 x 900.
4. Click OK.
If you do not see 1600 x 900 as an option, you may need to update your
OSD Warning Messages
When the monitor does not support a particular resolution mode you will
see the following message:
This means that the monitor cannot synchronize with the signal that it is
receiving from the computer. See Monitor Specifications for the Horizontal
and Verticalfrequency ranges addressable by this monitor. Recommended
mode is 1600 x 900.
YouwillseethefollowingmessagebeforetheDDC/CIfunctionisdisabled.
When monitor enters Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD
44 Operating the Monitor Operating the Monitor 45
graphics driver. Depending on your computer, complete one of the following
procedures:
If you have a Dell desktop or portable computer:
• Go to www.dell.com/support, enter your service tag, and download
the latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
• Go to the support site for your computer and download the latest
graphic drivers.
• Go to your graphics card website and download the latest graphic
drivers.
Using the Tilt, Swivel, and Vertical Extension
NOTE: This is applicable for a monitor with a stand. When any other
stand is bought, please refer to the respective stand setup guide for
set up instructions.
Tilt, Swivel
With the built-in pedestal, you can tilt the monitor for the most comfortable
viewing angle.
NOTE: The stand is detached when the monitor is shipped from the
factory.
Vertical Extension
NOTE: The stand extends vertically up to 130 mm. The figure below
illustrates how to extend the stand vertically.
46 Operating the Monitor Operating the Monitor 47
Rotating the Monitor
Before you rotate the monitor, your monitor should be fully vertically
extended (Vertical Extension) and fully tilted (Tilt) up to avoid hitting the
bottom edge of the monitor.
NOTE: To use the Display Rotation function (Landscape versus
Portrait view) with your Dell computer, you require an
updated graphics driver that is not included with this
monitor. To download the graphics driver,
go to www.dell.com/support and see the download
section for Video Drivers for latest driver updates.
NOTE: When in the Portrait View Mode, you may experience
performance degradation in graphic-intensive applications
(3D Gaming and etc.).
Adjusting the Rotation Display Settings of Your System
After you have rotated your monitor, you need to complete the procedure
below to adjust the Rotation Display Settings of your System.
NOTE: If you are using the monitor with a non-Dell computer, you
need to go the graphics driver website or your computer
manufacturer website for information on rotating the
’contents’ on your display.
To adjust the Rotation Display Settings:
1. Right-click on the desktop and click Properties.
2. Select the Settings tab and click Advanced.
3. If you have an ATI graphics card, select the Rotation tab and set the
preferred rotation.
If you have an nVidia graphics card, click the nVidia tab, in the left-hand
column select NVRotate, and then select the preferred rotation.
If you have an Intel® graphics card, select the Intel graphics tab, click
Graphic Properties, select the Rotation tab, and then set the preferred
rotation.
NOTE: If you do not see the rotation option or it is not working
correctly, go to www.dell.com/support and download the
latest driver for your graphics card.
48 Operating the Monitor Operating the Monitor 49
Built-in Diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the
screen abnormality you are experiencing is an inherent problem with your
monitor, or with your computer and video card.
NOTE: You can run the built-in diagnostics only when the video cable is
unplugged and the monitor is in self-test mode.
To run the built-in diagnostics:
1. Ensure that the screen is clean (no dust particles on the surface of the
screen).
2. Unplug the video cable(s) from the back of the computer or monitor.
The monitor then goes into the self-test mode.
3. Press and hold the Button 1 and Button 4 on the front panel
simultaneously for 2 seconds. A gray screen appears.
4. Carefully inspect the screen for abnormalities.
5. Press the Button 4 on the front panel again. The color of the screen
changes to red.
6. Inspect the display for any abnormalities.
7. Repeat steps 5 and 6 to inspect the display in green, blue, black, white
screens.
The test is complete when the white screen appears. To exit, press the Button
4 again.
If you do not detect any screen abnormalities upon using the built-in
diagnostic tool, the monitor is functioning properly. Check the video card
and computer.
Troubleshooting
CAUTION: Before you begin any of the procedures in this section,
follow the Safety Instructions
Self-Test
Your monitor provides a self-test feature that allows you to check whether
your monitor is functioning properly. If your monitor and computer are
properly connected but the monitor screen remains dark, run the monitor
self-test by performing the following steps:
1. Turn o both your computer and the monitor.
2. Unplug the video cable from the back of the computer. To ensure
proper Self-Test operation, remove both Digital (white connector) and
the Analog (blue connector) cables from the back of computer.
3. Turn on the monitor.
The floating dialog box should appear on-screen (against a black
background) if the monitor cannot sense a video signal and is working
correctly. While in self-test mode, the power LED remains blue. Also,
depending upon the selected input, one of the dialogs shown below will
continuously scroll through the screen.
or
or
4. This box also appears during normal system operation, if the video
cable becomes disconnected or damaged.
5. Turn o your monitor and reconnect the video cable; then turn on
both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure,
check your video controller and computer, because your monitor is
functioning properly.
50 Operating the Monitor Operating the Monitor 51
Common Problems
The following table contains general information about common monitor
problems you might encounter and the possible solutions.
Common
Symptoms What You
Experience Possible Solutions
No Video/Power
LED o
No picture • Ensure that the video cable
connecting the monitor and the
computer is properly connected
and secure.
• Verify that the power outlet is
functioning properly using any
other electrical equipment.
• Ensure that the power button is
depressed fully.
• Ensure that the correct input
source is selected via the Input
Source Select button.
• Check the “Power Button LED”
option under Energy Settings in
OSD Menu
No Video/Power
LED on
No picture or
no brightness
• Increase brightness & contrast
controls via OSD.
• Perform monitor self-test feature
check.
• Check for bent or broken pins in
the video cable connector.
• Run the built-in diagnostics.
• Ensure that the correct input
source is selected via the Input
Source Select button.
Poor Focus Picture is
fuzzy, blurry, or
ghosting
• Perform Auto Adjust via OSD.
• Adjust the Phase and Pixel Clock
controls via OSD.
• Eliminate video extension cables.
• Reset the monitor to Factory
Settings.
• Change the video resolution to
the correct aspect ratio (16:9).
Shaky/Jittery
Video
Wavy picture
or fine
movement
• Perform Auto Adjust via OSD.
• Adjust the Phase and Pixel Clock
controls via OSD.
• Reset the monitor to Factory
Settings.
• Check environmental factors.
• Relocate the monitor and test in
another room.
Missing Pixels LCD screen
has spots
• Cycle power on-o.
• Pixel that is permanently o is a
natural defect that can occur in
LCD technology.
• For more information on Dell
Monitor Quality and Pixel Policy,
see Dell Support site at: www.dell.
com/support/monitors.
52 Operating the Monitor Operating the Monitor 53
Stuck-on Pixels LCD screen
has bright
spots
• Cycle power on-o.
• Pixel that is permanently o is a
natural defect that can occur in
LCD technology.
• For more information on Dell
Monitor Quality and Pixel
Policy, see Dell Support site at:
http://www.dell.com/support/
monitors.
Brightness
Problems
Picture too
dim or too
bright
• Reset the monitor to Factory
Settings.
• Auto Adjust via OSD.
• Adjust brightness & contrast
controls via OSD.
Geometric
Distortion
Screen not
centered
correctly
• Reset the monitor to Factory
Settings.
• Auto Adjust via OSD.
• Adjust Horizontal Position &
Vertical Position controls via OSD.
NOTE: When using DVI-D input,
the positioning adjustments are not
available.
Horizontal/
Vertical Lines
Screen has one
or more lines
• Reset the monitor to Factory
Settings.
• Perform Auto Adjust via OSD.
• Adjust Phase and Pixel Clock
controls via OSD.
• Perform monitor self-test feature
check and determine if these
lines are also in self-test mode.
• Check for bent or broken pins in
the video cable connector.
• Run the built-in diagnostics.
NOTE: When using DVI-D input, the
Pixel Clock and Phase adjustments are
not available.
Synchronization
Problems
Screen is
scrambled or
appears torn
• Reset the monitor to Factory
Settings.
• Perform Auto Adjust via OSD.
• Adjust Phase and Pixel Clock
controls via OSD.
• Perform monitor self-test feature
check to determine if the
scrambled screen appears in self-
test mode.
• Check for bent or broken pins in
the video cable connector.
• Restart the computer in the safe
mode.
Safety Related
Issues
Visible signs
of smoke or
sparks
• Do not perform any
troubleshooting steps.
• Contact Dell immediately.
54 Operating the Monitor Operating the Monitor 55
Intermittent
Problems
Monitor
malfunctions
on & o
• Ensure that the video cable
connecting the monitor to the
computer is connected properly
and is secure.
• Reset the monitor to Factory
Settings.
• Perform monitor self-test feature
check to determine if the
intermittent problem occurs in
self-test mode.
Missing Color Picture missing
color
• Perform monitor self-test feature
check.
• Ensure that the video cable
connecting the monitor to the
computer is connected properly
and is secure.
• Check for bent or broken pins in
the video cable connector.
Wrong Color Picture color
not good
• Change the Color Setting Mode
in the Color Settings OSD to
Graphics or Video depending on
the application.
• Try dierent Color Preset Settings
in Color Settings OSD. Adjust
R/G/B value in Color Settings
OSD if the Color Management is
turned o.
• Change the Input Color Format
to PC RGB or YPbPr in the
Advance Setting OSD.
• Run the built-in diagnostics.
Image retention
from a static
image left on the
monitorfor a long
period of time
Faint shadow
from the
static image
displayed
appears on the
screen
• Use the Power Management
feature to turn o the monitor
at all times when not in use (for
more information, see Power
Management Modes).
• Alternatively, use a dynamically
changing screensaver.
Product Specific Problems
Specific
Symptoms
What You
Experience
Possible Solutions
Screen
image is too
small
Image is
centered on
screen, but
does not fill
entire viewing
area
• Check the Scaling Ratio setting in
Image Setting OSD
• Reset the monitor to Factory Settings.
Cannot
adjust the
monitor with
the buttons
on the front
panel
OSD does not
appear on the
screen
• Turn o the monitor, unplug the power
cord, plug back, and then turn on the
monitor.
No Input
Signal when
user controls
are pressed
No picture,
the LED light
is white.
• Check the signal source. Ensure the
Computer is not in the power saving
mode by moving the mouse or pressing
any key on the keyboard.
• Check to make sure Video Source to
VGA or DVI-D is powered and playing
video media.
• Check whether the signal cable is
plugged in properly.Re-plug the signal
cable if necessary.
• Reset the computer or video player.
56 Operating the Monitor Appendix 57
The picture
does not fill
the entire
screen.
The picture
cannot fill
the height or
width of the
screen
• Due to dierent video formats (aspect
ratio) of DVDs, the monitor may display
in full screen.
• Run the built-in diagnostics.
NOTE: When choosing DVI-D mode, the Auto Adjust function will not
be available.
Universal Serial Bus (USB) Specific Problems
Specific
Symptoms
What You
Experience
Possible Solutions
USB
interface is
not working
USB
peripherals
are not
working
• Check that your monitor is turned ON.
• Reconnect the upstream cable to
your computer.
• Reconnect the USB peripherals
(downstream connector).
• Switch o and then turn on the
monitor again.
• Reboot the computer.
• Some USB devices like external
portable HDD require higher electric
current; connect the device directly
to thecomputer system.
High Speed
USB 2.0
interface is
slow.
High Speed
USB 2.0
peripherals
working
slowly or not
working at all
• Check that your computer is USB
2.0-capable.
• Some computers have both USB 2.0
and USB 1.1 ports. Ensure that the
correct USB port is used.
• Reconnect the upstream cable to your
computer.
• Reconnect the USB peripherals
(downstream connector).
• Reboot the computer.
Appendix
Safety Instructions
WARNING: Use of controls, adjustments, or procedures other than
those specified in this documentation may result in exposure to shock,
electrical hazards, and/or mechanical hazards.
For information on safety instructions, see the Product Information Guide.
FCC Notices (U.S. Only) and Other Regulatory Information
For FCC notices and other regulatory information, see the regulatory
compliance website located at: http://www.dell.com/regulatory_compliance.
Contacting Dell
For customers in the United States, call 800-WWW-DELL (800-999-3355).
NOTE: If you do not have an active Internet connection, you can find
contact information on your purchase invoice, packing slip, bill, or Dell
product catalog.
Dell provides several online and telephone-based support and service
options. Availability varies by country and product, and some services may
not be available in your area.
To get online monitor support content:
1. Visit www.dell.com/support/monitors.
To contact Dell for sales, technical support, or customer service issues:
1. Visit www.dell.com/support.
2. Verify your country or region in the Choose A Country/Region drop-
down menu at the bottom of the page.
3. Click Contact Us on the left side of the page.
4. Select the appropriate service or support link based on your need.
5. Choose the method of contacting Dell that is convenient for you.
58 Setting Up Your Monitor Setting Up Your Monitor 59
Setting Up Your Monitor
Setting the display resolution to 1600 x 900 (maximum)
For maximum display performance while using the Microsoft Windows
operating systems, set the display resolution to 1600 x 900 pixels by
performing the following steps:
In Windows Vista®, Windows® 7, Windows® 8:
1. For Windows® 8 only, select the Desktop tile to switch to classic desktop.
2. Right-click on the desktop and click Screen Resolution.
3. Click the Dropdown list of the Screen Resolution and select 1600 x 900.
4. Click OK.
If you do not see 1600 x 900 as an option, you may need to update your
graphics driver. Please choose the scenario below that best describes the
computer system you are using, and follow the provided directions:
1: If you have a Dell™ desktop or a Dell™ portable computer with internet
access.
2: If you have non Dell™ desktop, portable computer, or graphic card.
If you have a Dell desktop or a Dell portable computer with
internet access
1. Go to www.dell.com/support, enteryour service tag, and download the
latest driver for your graphics card.
2. After installing the drivers for your Graphics Adapter, attempt to set the
resolution to 1600 x 900 again.
NOTE: If you are unable to set the resolution to 1600 x 900, please
contact Dell™ to inquire about a Graphics Adapter that supports these
resolutions.
60 Setting Up Your Monitor Setting Up Your Monitor 61
If you have non Dell desktop, portable computer, or graphic
card
In Windows Vista®, Windows® 7, Windows® 8:
1. For Windows® 8 only, select the Desktop tile to switch to classic desktop.
2. Right-click on the desktop and click Personalization.
3. Click Change Display Settings.
4. Click Advanced Settings.
5. Identify your graphics controller supplier from the description at the top
of the window (e.g. NVIDIA, ATI, Intel etc.).
6. Refer to the graphic card provider website for updated driver (for
example, http://www.ATI.com OR http://www.NVIDIA.com ).
7. After installing the drivers for your Graphics Adapter, attempt to set the
resolution to 1600 x 900 again.
NOTE: If you are unable to set the resolution to 1600 x 900, please
contact the manufacturer of your computer or consider purchasing a
graphics adapter that will support the video resolution of 1600 x 900.
Procedures for setting up dual monitors
in Windows Vista®, Windows® 7 or
Windows® 8
Content
(a) For Windows Vista®
(b) For Windows® 7
(c) For Windows® 8
(d) Setting Display Styles For Multiple Monitor
(a) For Windows Vista®
Connect the external monitor(s) to your laptop or desktop using a video
cable (VGA, DVI, DP etc.) and follow any of the below setup method.
Method 1: Using keyboard shortcut “Win+P”
1. Press the Windows logo key + P on your keyboard.
2. While holding down the Windows logo key, press P to toggle be-
tween the display selections.
Method 2: Using the “Personalize” menu
1. Right-click on the desktop and click Personalize.
2. Click Display Settings.
Setting Up Your Monitor 6362 Setting Up Your Monitor
3. Click Identify Monitors.
You may need to restart your system and repeat steps 1 to 3 if the
system does not detect the added monitor.
(b) For Windows® 7
Connect the external monitor(s) to your laptop or desktop using a video
cable (VGA, DVI, DP etc.) and follow any of the below setup method.
Method 1: Using keyboard shortcut “Win+P”
1. Press the Windows logo key + P on your keyboard.
2. While holding down the Windows logo key, press P to toggle be-
tween the display selections.
Method 2: Using the “Screen Resolution” menu
1. Right-click on the desktop and click Screen resolution.
2. Click Multiple displays to choose a display selection. If you do not see
the additional monitor listed, click Detect.
You may need to restart your system and repeat steps 1 to 3 if the
system does not detect the added monitor.
64 Setting Up Your Monitor Setting Up Your Monitor 65
(c) For Windows® 8
Connect the external monitor(s) to your laptop or desktop using a video
cable (VGA, DVI, DP etc.) and follow any of the below setup method.
Method 1: Using keyboard shortcut “Win+P”
1. Press the Windows logo key + P on your keyboard.
2. While holding down the Windows logo key, press P to toggle be-
tween the display selections.
Method 2: Using the “Screen Resolution” menu
1. From the Start screen, select Desktop tile to switch to the Classic
Windows desktop.
2. Right-click on the desktop and click Screen resolution.
3. Click Multiple displays to choose a display selection. If you do not
see the additional monitor listed, click Detect.
You may need to restart your system and repeat steps 1 to 3 if the
system does not detect the added monitor.
Setting Up Your Monitor 6766 Setting Up Your Monitor
(d) Setting Display Styles For Multiple Monitor
After the external monitor(s) have been set up, users can select the
desired display style from Multiple displays menu: Duplicate, Extend,
Show Desktop On.
Duplicate these displays: Duplicate the same screen on two monitors
with the same resolution, chosen based on the monitor with a lower
resolution.
(i) For Windows Vista®
[DUPLICATE NOT AVAILABLE]
(ii) For Windows® 7
Setting Up Your Monitor 6968 Setting Up Your Monitor
(iii) For Windows® 8
Extend these displays: This option is recommended when an exter-
nal monitor is connected to a laptop, and each monitor can display
dierent screen independently to improve user convenience. The rel-
ative position of the screens can be set up here, for example monitor
1 may be set up to be to the left of monitor 2 or vice versa. This de-
pends on the physical position of the LCD monitor in relation to the
laptop. The horizontal line displayed on both monitors can be based
on the laptop or external monitor. These are all adjustable options,
and all a user need do is drag the monitor of the main screen to the
extended monitor.
(i) For Windows Vista®
(ii) For Windows® 7
70 Setting Up Your Monitor Setting Up Your Monitor 71
(iii) For Windows® 8
Show desktop only on…: Display the status of a particular monitor.
This option is typically chosen when the laptop is used as a PC so the
user can enjoy a large external monitor. Most current laptops support
mainstream resolutions. As shown in the figure above, the resolution
of the laptop monitor is only 1366 x 768, but after connecting a 23”
external LCD monitor, users can immediately improve their visual
enjoyment to 1600 x 900 Full HD quality.
(i) For Windows Vista®
72 Setting Up Your Monitor Setting Up Your Monitor 73
(ii) For Windows® 7 (iii) For Windows® 8
74 Setting Up Your Monitor