DELL P2423DE User Manual
Displayed below is the user manual for P2423DE by DELL which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
1
Service Manual–P2423DE
Regulatory model: P2423DEc
Version: 02
Date:2021/10/11
2
Content Index
1. General Safety Instructions ....................................................................................... 3
1.1 SAFETY: General Safety ...................................................................................... 3
1.2 SAFETY: General Power Safety ........................................................................... 5
2. Exploded view diagram with list of items ................................................................. 6
3. Wiring connectivity diagram ...................................................................................... 8
4. How to connect and disconnect power cable/ connectivity cable.......................... 9
5. Disassembly and Assembly Procedures ................................................................. 11
5.1 Disassembly SOP ................................................................................................ 11
5.2 Assembly SOP .................................................................................................... 15
6. Trouble shooting instructions .................................................................................
3
1. General Safety Instructions
Use the following safety guidelines to help ensure your own personal safety and to help protect your
equipment and working environment from potential damage.
NOTE: In this section, equipment refers to monitors.
IMPORTANT NOTICE FOR USE IN HEALTHCARE ENVIRONMENTS:
Dell products are not medical devices and are not listed under UL or IEC 60601 (or equivalent). As a
result, they must not be used within 6 feet of a patient or in a manner that directly or indirectly contacts
a patient
1.1 SAFETY: General Safety
WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all
times.
When setting up the equipment for use:
Place the equipment on a hard, level surface. Leave 10.2 cm (4 in) minimum of clearance on all
vented sides of the computer to permit the airflow required for proper ventilation.
Restricting airflow can damage the computer or cause a fire.
Do not stack equipment or place equipment so close together that it is subject to recalculated or
preheated air.
NOTE: Review the weight limits referenced in your computer documentation before placing a
monitor or other devices on top of your computer.
Ensure that nothing rests on your equipment's cables and that the cables are not located where they
can be stepped on or tripped over.
Ensure that all cables are connected to the appropriate connectors. Some connectors have a similar
appearance and may be easily confused (for example, do not plug a telephone cable into the network
connector).
Do not place your equipment in a closed-in wall unit or on a bed, sofa, or rug.
Keep your device away from radiators and heat sources.
Keep your equipment away from extremely hot or cold temperatures to ensure that it is used within
the specified operating range.
Do not push any objects into the air vents or openings of your equipment. Doing so can cause fire or
electric shock by shorting out interior components.
Avoid placing loose papers underneath your device. Do not place your device in a closed-in wall unit,
or on a soft, fabric surface such as a bed, sofa, carpet, or a rug.
When operating your equipment:
Do not use your equipment in a wet environment, for example, near a bath tub, sink, or swimming
pool or in a wet basement.
Do not use AC powered equipment during an electrical storm. Battery powered devices may be used
4
if all cables have been disconnected.
Do not spill food or liquids on your equipment.
Before you clean your equipment, disconnect it from the electrical outlet. Clean your device with a
soft cloth dampened with water. Do not use liquids or aerosol cleaners, which may contain flammable
substances.
Clean the monitor display with a soft, clean cloth and water. Apply the water to the cloth, then
stroke the cloth across the display in one direction, moving from the top of the display to the bottom.
Remove moisture from the display quickly and keep the display dry.
Long-term exposure to moisture can damage the display. Do not use a commercial window cleaner
to clean your display.
If your equipment does not operate normally - in particular, if there are any unusual sounds or
smells coming from it - unplug it immediately and contact an authorized dealer or service center.
Protecting Against Electrostatic Discharge
Electrostatic discharge (ESD) events can harm electronic components inside your equipment. Under certain
conditions, ESD may build up on your body or an object, such as a peripheral, and then discharge into
another object, such as your computer. To prevent ESD damage, you should discharge static electricity
from your body before you interact with any of your equipment’s internal electronic components, such as a
memory module. You can protect against ESD by touching a metal grounded object (such as an unpainted
metal surface on your computer’s I/O panel) before you interact with anything electronic. When connecting
a peripheral (including handheld digital assistants) to your equipment, you should always ground both
yourself and the peripheral before connecting it. In addition, as you work inside the equipment, periodically
discharge any static charge your body may have accumulated.
You can also take the following steps to prevent damage from electrostatic discharge:
When unpacking a static-sensitive component from its shipping carton, do not remove the
component from the antistatic packing material until you are ready to install the component.
Just before un wrapping the antistatic package, be sure to discharge static electricity from your
body.
When transporting a sensitive component, first place it in an antistatic container or packaging.
Handle all electrostatic sensitive components in a static-safe area. If possible, use antistatic floor
pads and work bench pads.
5
1.2 SAFETY: General Power Safety
Observe the following guidelines when connecting your equipment to a power source:
Check the voltage rating before you connect the equipment to an electrical outlet to ensure that the
required voltage and frequency match the available power source.
Do not plug the equipment power cables into an electrical outlet if the power cable is damaged
Norway and Sweden: If this product is provided with a 3-prong power cable, connect the power
cable to a grounded electrical outlet only.
If you use an extension power cable, ensure that the total ampere rating of the products plugged in
to the extension power cable does not exceed the ampere rating of the extension cable.
If you must use an extension cable or power strip, ensure the extension cable or power strip is
connected to a wall power outlet and not to another extension cable or power strip. The extension cable or
power strip must be designed for grounded plugs and plugged into a grounded wall outlet.
If you are using a multiple-outlet power strip, use caution when plugging the power cable into the
power strip. Some power strips may allow you to insert a plug incorrectly. Incorrect insertion of the power
plug could result in permanent damage to your equipment, as well as risk of electric shock and/or fire.
Ensure that the ground prong of the power plug is inserted into the mating ground contact of the power
strip.
Be sure to grasp the plug, not the cable, when disconnecting equipment from an electric socket.
If your equipment uses an AC adapter:
Use only the Dell provided AC adapter approved for use with this device. Use of another AC adapter
may cause a fire or explosion.
NOTE: Refer to your system rating label for information on the proper adapter model approved for
use with your device.
Place the AC adapter in a ventilated area, such as a desk top or on the floor, when you use it to run
the computer or to charge the battery. Do not cover the AC adapter with papers or other items that will
reduce cooling; also, do not use the AC adapter inside a carrying case.
The AC adapter may become hot during normal operation of your computer. Use care when
handling the adapter during or immediately after operation.
It is recommended that you lay the adapter on the floor or desk so that the green light is visible.
This will alert you if the adapter should accidentally go off due to external effects. If for any reason the
green light goes off, disconnect the AC power cord from the wall for a period of ten seconds, and then
reconnect the power cord.
Japan Only: Use only the Dell-provided AC power cable with the AC adapter. Use of any other power
cable may damage the device or AC adapter or may present risk of fire or electric shock.
6
2. Exploded view diagram with list of items
○
31 ○
32 ○
33 ○
34
7
No.
Description
Q’ty
Remark
1
Front trim
1
For EMEA Only,
not for
other regions
2
Deco plate
1
3
PANEL
1
4
SCREW Q2
4
5
LED PCB
1
6
BKT-SPEAKER
2
7
MIDDLE FRAME
1
8
LENS
1
9
SCREWS(M3*3L)
13
10
USB PCB
1
11
SCREW Q3
3
12
SCREWS(M3*6L)
10
13
SCREW M4
1
14
PWD MYLAR
2
15
PWD BOARD
1
16
MAINBOARD
1
17
MAINFRAME
1
18
QR-SLIDER
1
19
QR-BUTTON
1
20
SPRINGS
2
21
KEY BOARD
1
22
POWER KEY
1
23
NAVI KEY
1
24
SECURITY PLATE
1
25
REAR COVER
1
26
DELL LOGO
1
27
SCREWS(M4*10L)
4
28
STAND ASS’Y
1
29
BASE ASS’Y
1
30
CONVERTER BOARD
1
31
POWER CABLE
1
See “NOTE"
32
DP CABLE
1
See “NOTE"
8
NOTE:
For replacement of power cord, connectivity cable and external power supply (if applicable), contact Dell:
1. Go to https://www.dell.com/support.
2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom-right corner of the page.
3. Click Contact Us next to the country dropdown.
4. Select the appropriate service or support link based on your need.
5. Choose the method of contacting Dell that is convenient for you
33
USB C( C-C)
1
See “NOTE"
34
USB C(C-A)
1
See “NOTE"
9
3. Wiring connectivity diagram
10
4. How to connect and disconnect power cable/ connectivity cable
11
5. Mechanical Instruction
NOTE:
This “Disassembly and Assembly Procedures” is for EMEA only, not for other regions. Please note that
Dell will deem warranty void if any disassembly is done on the monitors.
Tools Required
List the type and size of the tools that would typically can be used to disassemble the product to
a point where components and materials requiring selective treatment can be removed.
Tool Description:
−
Screwdriver (Phillip-head, Hexagonal head)
−
Penknife
12
5.1Disassembly Procedures
Step
Figure
Remark
Remove Stand
ass’y
Press the button marked
red and remove the
stand ass’y
Remove the
rear cover
Remove the 4 pcs
screws .
13
Use scraper to insert from
the right site and then open
the rear cover
Remove the
rear cover
Disconnect the cables
open the cover on the
keyboard/ usb board and
then pull out the cables
14
Remove the
mainframe
Remove the two
screws on the
mainframe and then
disconnect the FFC
cables
Remove the mylar
Remove the
powerbard and
mainboard and
converter
board
Remove the screws on the
mainboard and power board
15
Remove the usb
board
Remove the screw on the
usb board
Remove the
keyboard
Remove the 3pcs screws on
the keyboard
Remove the
middle frame
Remove the screws on
the middle frame
Mainboard and
powerboard and
coverter board
16
panel
17
5.2 Assembly Procedures
Assemble
and middle
frame
Tighten the screws on it
Assemble the key
board
Tighten the screws on it
Assemble the usb
board
Tighten the screws on it
assemble the
mainboard and
powerboard and
mylar
Tighten the screws on it
18
Stick the myalr
Assemble the
mainframe
tighten the 2 pcs on the
mainframe and conncet
the FFC cables .
Connect all the cables
19
Assemble the rear
cover
Tighten the screws on
the rear cover
Assemble the
stand ass’y
Pull in the stand ass’y
20
6. Trouble shooting instructions
21
22
23
24
25