Table of Contents
- Dell EMC PowerEdge R440 Technical Specifications
- Dell EMC PowerEdge R440 system overview
- Technical specifications
- Documentation resources
- Getting help
DELL R440 User Manual
Displayed below is the user manual for R440 by DELL which is a product in the Servers category. This manual has pages.
Related Manuals
Dell EMC PowerEdge R440
Technical Specications
Regulatory Model: E45S Series
Regulatory Type: E45S001
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2017 - 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other
trademarks may be trademarks of their respective owners.
2018 - 10
Rev. A02
Contents
1 Dell EMC PowerEdge R440 system overview................................................................................................. 4
2 Technical specications................................................................................................................................. 5
System dimensions............................................................................................................................................................ 6
Chassis weight....................................................................................................................................................................6
Processor specications....................................................................................................................................................7
Supported operating systems...........................................................................................................................................7
PSU specications............................................................................................................................................................. 7
System battery .................................................................................................................................................................. 7
Expansion bus specications............................................................................................................................................ 7
Memory specications...................................................................................................................................................... 8
Storage controller specications......................................................................................................................................8
Drive specications............................................................................................................................................................8
Drives.............................................................................................................................................................................8
Ports and connectors specications................................................................................................................................9
USB ports......................................................................................................................................................................9
NIC ports.......................................................................................................................................................................9
Serial connector........................................................................................................................................................... 9
VGA ports..................................................................................................................................................................... 9
Internal Dual SD Module..............................................................................................................................................9
Video specications........................................................................................................................................................... 9
Environmental specications...........................................................................................................................................10
Standard operating temperature............................................................................................................................... 11
Expanded operating temperature..............................................................................................................................11
Particulate and gaseous contamination specications ......................................................................................... 13
3 Documentation resources.............................................................................................................................15
4 Getting help..................................................................................................................................................17
Contacting Dell EMC........................................................................................................................................................17
Documentation feedback.................................................................................................................................................17
Accessing system information by using QRL................................................................................................................ 17
Quick Resource Locator for Dell EMC PowerEdge R440 system........................................................................ 18
Receiving automated support with SupportAssist ......................................................................................................18
Recycling or End-of-Life service information................................................................................................................18
Contents 3
Dell EMC PowerEdge R440 system overview
The Dell EMC PowerEdge R440 system is a 1U, dual socket rack system supports up to:
• Two Intel Xeon Scalable Processors
• 16 DIMM slots
• 4 x 3.5-inch drives, 8 x 2.5-inch drives, or 10 x 2.5-inch drives
• Four NVMe drives on 10 x 2.5-inch drive system
• Two redundant power supply units (PSU) or single cabled PSU
NOTE: All instances of SAS, SATA hard drives and SSDs are referred to as drives in this document, unless specied otherwise.
1
4 Dell EMC PowerEdge R440 system overview
Technical specications
The technical and environmental specications of your system are outlined in this section.
Topics:
• System dimensions
• Chassis weight
• Processor specications
• Supported operating systems
• PSU specications
• System battery
• Expansion bus specications
• Memory specications
• Storage controller specications
• Drive specications
• Ports and connectors specications
• Video specications
• Environmental specications
2
Technical specications 5
System dimensions
Figure 1. Dimensions of the Dell EMC PowerEdge R440 system
Table 1. Dimensions of the Dell EMC PowerEdge R440 system
Xa Xb Y Za Zb Zc
482.0 mm (18.97
inches)
434.0 mm (17.08
inches)
42.8 mm (3.41
inches)
35.84 mm (1.41
inches) (with bezel)
22 mm (0.87 inches)
(without bezel)
x4 and x10 = 657.25
mm (25.87 inches)
x8 = 606.47 (23.87
inches)
x4 and x10 = 692.62
(27.26 inches)
x8 = 641.85 mm
(25.26 inches)
Chassis weight
Table 2. Dell EMC PowerEdge R440 system Chassis weight
System Maximum weight (with all drives/SSDs)
4 x 3.5-inch drive system 17.64 Kg (38.90 lb)
8 x 2.5-inch drive system 16.04 Kg (35.36 lb)
10 x 2.5-inch drive system 16.81 Kg (37.07 lb)
6 Technical specications
Processor specications
The Dell EMC PowerEdge R440 system supports up to two Intel Xeon Scalable Processor, up to 22 cores per processor.
Supported operating systems
The Dell EMC PowerEdge R440 system supports the following operating systems:
• Canonical Ubuntu LTS
• Citrix XenServer
• Microsoft Windows Server with Hyper-V
• Red Hat Enterprise Linux
• SUSE Linux Enterprise Server
• VMware ESXi
NOTE: For more information about the specic versions and additions, go to Dell.com/support/home/Drivers/SupportedOS/
poweredge-r440.
PSU specications
The Dell EMC PowerEdge R440 system supports the following AC power supply units (PSU).
Table 3. PSU specications
PSU Class Heat dissipation
(maximum)
Frequency Voltage
550 W AC Platinum 2559 BTU/hr 50/60 Hz 100–240 V AC, autoranging
450 W AC Bronze 1871 BTU/hr 50/60 Hz 100–240 V AC, autoranging
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: This system is also designed to connect to the IT power systems with a phase-to-phase voltage not exceeding 230 V.
System battery
The Dell EMC PowerEdge R440 system supports CR 2032 3.0-V lithium coin cell system battery.
Expansion bus specications
The Dell EMC PowerEdge R440 system supports PCI express (PCIe) generation three expansion cards, which must be installed on the
system board using expansion card risers.
Table 4. Expansion card riser congurations
Expansion card riser PCIe slots on the
riser
Height Length Link
LOM riser Slot 1 Mezz type Mezz type x8
Right riser Slot 2 Low Prole Half Length x16
Right riser Slot 2 Full Height Half Length x16
PCIe passive bridge Slot-integrated Low Prole Half Length x8
Technical specications 7
Expansion card riser PCIe slots on the
riser
Height Length Link
Internal riser Slot-integrated Low Prole Half Length x8
Left riser Slot 2 Low Prole Half Length x16
Left riser Slot 3 Low Prole Half Length x16
Memory specications
Table 5. Memory specications
DIMM type DIMM rank DIMM
capacity
Single processor Dual processors
Minimum RAM Maximum RAM Minimum RAM Maximum RAM
RDIMM Single rank 8 GB 8 GB 80 GB 16 GB 128 GB
RDIMM Dual rank 16 GB 16 GB 160 GB 32 GB 256 GB
RDIMM Dual rank 32 GB 32 GB 320 GB 64 GB 512 GB
LRDIMM Quad rank 64 GB 64 GB 640 GB 128 GB 1024 GB
Storage controller specications
The Dell EMC PowerEdge R440 system supports:
•Internal controllers: PowerEdge Expandable RAID Controller (PERC) H330, H730p, H740p, HBA330, Software RAID (SWRAID) S140
•External PERC (RAID): H840
•External HBAs (non-RAID): 12 Gbps SAS HBA
•Boot Optimized Storage Subsystem (BOSS): HWRAID 2 x M.2 SSDs 120GB, 240 GB with 6Gbps
– x8 connector using PCIe gen 2.0 x2 lanes, available only in the low-prole and half-height form factor
Drive specications
Drives
The Dell EMC PowerEdge R440 system supports:
• Up to 4 x 3.5-inch drives with hard drive adapter, internal, hot swappable SAS, SATA, or Nearline SAS drives
• Up to 8 x 2.5-inch drives or 10 x 2.5-inch drives with hard drive adapter, internal, hot swappable SAS, SATA, or Nearline SAS drives
• Up to 4 x 3.5-inch drives or 8 x 2.5-inch drives or 10 x 2.5-inch drives with hard drive adapter, internal, hot swappable SATA SSDs
• 10 x 2.5-inch drives with up to 4 NVMe PCIe drives
Drives are supplied in hot swappable drive carriers that t in the drive slots.
CAUTION: Before attempting to remove or install a drive while the system is running, see the documentation for the storage
controller card to ensure that the host adapter is congured correctly.
CAUTION: Do not turn o or restart your system while a drive is being formatted. Doing so can cause a drive failure.
When you format a drive, allow enough time for the formatting to complete. Be aware that high-capacity drives can take a long time to
format.
8Technical specications
Ports and connectors specications
USB ports
Table 6. Dell EMC PowerEdge R440 system USB specications
Front panel Back panel Internal USB
• One USB 2.0-compliant port
• One iDRAC Direct (Micro-AB USB)
port
• Two USB 3.0-compliant port • One internal USB 3.0 port
NIC ports
The Dell EMC PowerEdge R440 system supports two Network Interface Controller (NIC) ports on the back panel, which have two 1 Gbps
conguration.
NOTE: You can install up to ve PCIe add-on NIC cards.
Serial connector
The serial connector connects a serial device to the system. The Dell EMC PowerEdge R440 system supports one serial connector on the
back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The Dell EMC PowerEdge R440 system supports
two 15-pin VGA ports.
Internal Dual SD Module
The Dell EMC PowerEdge R440 system supports two optional ash memory card slots with an internal dual MicroSD module. The IDSDM
or vFlash module combines the IDSDM or vFlash features into a single module.
NOTE: One card slot is dedicated for redundancy.
Video specications
The Dell EMC PowerEdge R440 system supports Matrox G200eR2 graphics card with 16 MB capacity.
Table 7. Supported video resolution options
Resolution Refresh rate (Hz) Color depth (bits)
640x480 60,70 8, 16, 32
800x600 60,75, 85 8, 16, 32
Technical specications 9
Resolution Refresh rate (Hz) Color depth (bits)
1024x768 60,75, 85 8, 16, 32
1152x864 60,75, 85 8, 16, 32
1280x1024 60,75 8, 16, 32
1440x900 60 8, 16, 32
Environmental specications
NOTE: For additional information about environmental certications, please refer to the Product Environmental Datasheet
located with the Manuals & Documents on Dell.com/poweredgemanuals
Table 8. Temperature specications
Temperature Specications
Storage –40°C to 65°C (–40°F to 149°F)
Continuous operation (for altitude less than 950 m or 3117
ft)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment.
Fresh air For information about fresh air, see the Expanded Operating Temperature
section.
Maximum temperature gradient (operating and storage) 20°C/h (68°F/h)
Table 9. Relative humidity specications
Relative humidity Specications
Storage 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be
non-condensing at all times.
Operating 10% to 80% relative humidity with 29°C (84.2°F) maximum dew point.
Table 10. Maximum vibration specications
Maximum vibration Specications
Operating 0.26 Grms at 5 Hz to 350 Hz (all operation orientations).
Storage 1.88 Grms at 10 Hz to 500 Hz for 15 min (all six sides tested).
Table 11. Maximum shock specications
Maximum shock Specications
Operating Six consecutively executed shock pulses in the positive and negative x, y,
and z axes of 6 G for up to 11 ms.
Storage Six consecutively executed shock pulses in the positive and negative x, y,
and z axes (one pulse on each side of the system) of 71 G for up to 2 ms.
10 Technical specications
Table 12. Maximum altitude specications
Maximum altitude Specications
Operating 3048 m (10,000 ft)
Storage 12,000 m (39,370 ft)
Table 13. Operating temperature derating specications
Operating temperature derating Specications
Up to 35°C (95°F) Maximum temperature is reduced by 1°C/300 m (1°F/547 ft) above 950 m
(3,117 ft).
35°C to 40°C (95°F to 104°F) Maximum temperature is reduced by 1°C/175 m (1°F/319 ft) above 950 m
(3,117 ft).
40°C to 45°C (104°F to 113°F) Maximum temperature is reduced by 1°C/125 m (1°F/228 ft) above 950 m
(3,117 ft).
Standard operating temperature
Table 14. Standard operating temperature specications
Standard operating temperature Specications
Continuous operation (for altitude less than 950 m or 3117
ft)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment.
Expanded operating temperature
Table 15. Expanded operating temperature specications
Expanded operating temperature Specications
Continuous operation 5°C to 40°C at 5% to 85% RH with 29°C dew point.
NOTE: Outside the standard operating temperature (10°C to
40°C), the system can operate continuously in temperatures as low
as 5°C and as high as 40°C.
For temperatures between 35°C and 40°C, de-rate maximum allowable
temperature by 1°C per 175 m above 950 m (1°F per 319 ft).
≤ 1% of annual operating hours –5°C to 45°C at 5% to 90% RH with 29°C dew point.
NOTE: Outside the standard operating temperature (10°C to
40°C), the system can operate down to –5°C or up to 45°C for a
maximum of 1% of its annual operating hours.
For temperatures between 40°C and 45°C, de-rate maximum allowable
temperature by 1°C per 125 m above 950 m (1°F per 228 ft).
NOTE: When operating in the expanded temperature range, system performance may be impacted.
Technical specications 11
NOTE: When operating in the expanded temperature range, ambient temperature warnings may be reported on the bezel's LCD
panel and in the System Event Log.
Expanded operating temperature restrictions
• Do not perform a cold startup below 5°C.
• The operating temperature specied is for a maximum altitude of 3048 m (10,000 ft).
• 105 W/4C, 115 W/6C, 130 W/8C, 140 W/14C or higher wattage processor (TDP>140 W) are not supported.
• Redundant power supply conguration is required.
• Non-Dell qualied peripheral cards and/or peripheral cards greater than 25 W are not supported.
• NVMe drives are not supported.
• Apache Pass DIMM and NVDIMM are not supported.
Thermal restriction matrix
Table 16. Thermal restriction matrix for Dell EMC PowerEdge R440 system
Storage conguration 10x 2.5-inch with
NVMe drive
10x 2.5-inch
drive
8x 2.5-inch drive 4x 3.5-inch drive
Processor
number
TDP (W) Core count Ambient support = 35°C
Intel Xeon Gold
6152
140 22 Yes Yes Yes Yes
Intel Xeon Gold
6140
18 Yes Yes Yes Yes
Intel Xeon Gold
6138
125 20 Yes Yes Yes Yes
Intel Xeon Gold
6130
16 Yes Yes Yes Yes
Intel Xeon
Platinum 8153
16 Yes Yes Yes Yes
Intel Xeon Gold
6132
140 14 No
C30
Yes Yes Yes
Intel Xeon Gold
6134
130 8 No
C30
Yes Yes Yes
Intel Xeon Gold
6126
125 12 Yes Yes Yes Yes
Intel Xeon Gold
6128
115 6 No
C30
Yes Yes Yes
Intel Xeon Gold
5122
105 4 No
C30
Yes Yes Yes
12 Technical specications
Storage conguration 10x 2.5-inch with
NVMe drive
10x 2.5-inch
drive
8x 2.5-inch drive 4x 3.5-inch drive
Intel Xeon
Platinum 8156
105 4 No
C30
Yes Yes Yes
Intel Xeon Gold
5120
105 14 Yes Yes Yes Yes
Intel Xeon Gold
5118
105 12 Yes Yes Yes Yes
Intel Xeon Gold
5115
85 10 Yes Yes Yes Yes
Intel Xeon Silver
4116
85 12 Yes Yes Yes Yes
Intel Xeon Silver
4114
85 10 Yes Yes Yes Yes
Intel Xeon Silver
4110
85 8 Yes Yes Yes Yes
Intel Xeon Silver
4108
85 8 Yes Yes Yes Yes
Intel Xeon Bronze
3106
85 8 Yes Yes Yes Yes
Intel Xeon Bronze
3104
85 6 Yes Yes Yes Yes
Intel Xeon Silver
4112
85 4 Yes Yes Yes Yes
Particulate and gaseous contamination specications
The following table denes the limitations that help avoid any equipment damage or failure from particulates and gaseous contamination. If
the levels of particulates or gaseous pollution exceed the specied limitations and result in equipment damage or failure, you may need to
rectify the environmental conditions. Re-mediation of environmental conditions is the responsibility of the customer.
Table 17. Particulate contamination specications
Particulate contamination Specications
Air ltration Data center air ltration as dened by ISO Class 8 per ISO 14644-1 with a
95% upper condence limit.
NOTE: This condition applies to data center environments only. Air
ltration requirements do not apply to IT equipment designed to be
used outside a data center, in environments such as an oce or
factory oor.
NOTE: Air entering the data center must have MERV11 or MERV13
ltration.
Conductive dust Air must be free of conductive dust, zinc whiskers, or other conductive
particles.
Technical specications 13
Particulate contamination Specications
NOTE: This condition applies to data center and non-data center
environments.
Corrosive dust • Air must be free of corrosive dust.
• Residual dust present in the air must have a deliquescent point less than
60% relative humidity.
NOTE: This condition applies to data center and non-data center
environments.
Table 18. Gaseous contamination specications
Gaseous contamination Specications
Copper coupon corrosion rate <300 Å/month per Class G1 as dened by ANSI/ISA71.04-1985.
Silver coupon corrosion rate <200 Å/month as dened by AHSRAE TC9.9.
NOTE: Maximum corrosive contaminant levels measured at ≤50% relative humidity.
14 Technical specications
Documentation resources
This section provides information about the documentation resources for your system.
To view the document that is listed in the documentation resources table:
• From the Dell EMC support site:
a Click the documentation link that is provided in the Location column in the table.
b Click the required product or product version.
NOTE: To locate the product name and model, see the front of your system.
c On the Product Support page, click Manuals & documents.
• Using search engines:
– Type the name and version of the document in the search box.
Table 19. Additional documentation resources for your system
Task Document Location
Setting up your system For more information about installing and securing
the system into a rack, see the Rail Installation
Guide included with your rack solution.
For information about setting up your system, see
the Getting Started Guide document that is
shipped with your system.
Dell.com/poweredgemanuals
Conguring your system For information about the iDRAC features,
conguring and logging in to iDRAC, and managing
your system remotely, see the Integrated Dell
Remote Access Controller User's Guide.
For information about understanding Remote
Access Controller Admin (RACADM)
subcommands and supported RACADM interfaces,
see the RACADM CLI Guide for iDRAC.
For information about Redsh and its protocol,
supported schema, and Redsh Eventing
implemented in iDRAC, see the Redsh API Guide.
For information about iDRAC property database
group and object descriptions, see the Attribute
Registry Guide.
Dell.com/poweredgemanuals
For information about earlier versions of the iDRAC
documents.
To identify the version of iDRAC available on your
system, on the iDRAC web interface, click ? >
About.
Dell.com/idracmanuals
For information about installing the operating
system, see the operating system documentation.
Dell.com/operatingsystemmanuals
3
Documentation resources 15
Task Document Location
For information about updating drivers and
rmware, see the Methods to download rmware
and drivers section in this document.
Dell.com/support/drivers
Managing your system For information about systems management
software oered by Dell, see the Dell OpenManage
Systems Management Overview Guide.
Dell.com/poweredgemanuals
For information about setting up, using, and
troubleshooting OpenManage, see the Dell
OpenManage Server Administrator User’s Guide.
Dell.com/openmanagemanuals > OpenManage
Server Administrator
For information about installing, using, and
troubleshooting Dell OpenManage Essentials, see
the Dell OpenManage Essentials User’s Guide.
Dell.com/openmanagemanuals > OpenManage
Essentials
For information about installing and using Dell
SupportAssist, see the Dell EMC SupportAssist
Enterprise User’s Guide.
Dell.com/serviceabilitytools
For information about partner programs enterprise
systems management, see the OpenManage
Connections Enterprise Systems Management
documents.
Dell.com/openmanagemanuals
Working with the Dell
PowerEdge RAID controllers
For information about understanding the features
of the Dell PowerEdge RAID controllers (PERC),
Software RAID controllers, or BOSS card and
deploying the cards, see the Storage controller
documentation.
Dell.com/storagecontrollermanuals
Understanding event and error
messages
For information about the event and error
messages generated by the system rmware and
agents that monitor system components, see the
Error Code Lookup.
Dell.com/qrl
Troubleshooting your system For information about identifying and
troubleshooting the PowerEdge server issues, see
the Server Troubleshooting Guide.
Dell.com/poweredgemanuals
16 Documentation resources
Getting help
Topics:
• Contacting Dell EMC
• Documentation feedback
• Accessing system information by using QRL
• Receiving automated support with SupportAssist
• Recycling or End-of-Life service information
Contacting Dell EMC
Dell EMC provides several online and telephone based support and service options. If you do not have an active internet connection, you
can nd contact information about your purchase invoice, packing slip, bill, or Dell EMC product catalog. Availability varies by country and
product, and some services may not be available in your area. To contact Dell EMC for sales, technical assistance, or customer service
issues:
1 Go to Dell.com/support/home.
2 Select your country from the drop-down menu on the lower right corner of the page.
3 For customized support:
a Enter your system Service Tag in the Enter your Service Tag eld.
b Click Submit.
The support page that lists the various support categories is displayed.
4 For general support:
a Select your product category.
b Select your product segment.
c Select your product.
The support page that lists the various support categories is displayed.
5 For contact details of Dell EMC Global Technical Support:
a Click Global Technical Support.
b The Contact Technical Support page is displayed with details to call, chat, or e-mail the Dell EMC Global Technical Support
team.
Documentation feedback
You can rate the documentation or write your feedback on any of our Dell EMC documentation pages and click Send Feedback to send
your feedback.
Accessing system information by using QRL
You can use the Quick Resource Locator (QRL) located on the information tag in the front of the R440, to access the information about
the Dell EMC PowerEdge R440.
Prerequisites
Ensure that your smartphone or tablet has the QR code scanner installed.
4
Getting help 17
The QRL includes the following information about your system:
• How-to videos
• Reference materials, including the Installtion and Service Manual, LCD diagnostics, and mechanical overview
• Your system service tag to quickly access your specic hardware conguration and warranty information
• A direct link to Dell to contact technical assistance and sales teams
Steps
1 Go to Dell.com/qrl and navigate to your specic product or
2 Use your smartphone or tablet to scan the model-specic Quick Resource (QR) code on your system or in the Quick Resource
Locator section.
Quick Resource Locator for Dell EMC PowerEdge R440
system
Figure 2. Quick Resource Locator for Dell EMC PowerEdge R440 system
Receiving automated support with SupportAssist
Dell EMC SupportAssist is an optional Dell EMC Services oering that automates technical support for your Dell EMC server, storage, and
networking devices. By installing and setting up a SupportAssist application in your IT environment, you can receive the following benets:
•Automated issue detection — SupportAssist monitors your Dell EMC devices and automatically detects hardware issues, both
proactively and predictively.
•Automated case creation — When an issue is detected, SupportAssist automatically opens a support case with Dell EMC Technical
Support.
•Automated diagnostic collection — SupportAssist automatically collects system state information from your devices and uploads it
securely to Dell EMC. This information is used by Dell EMC Technical Support to troubleshoot the issue.
•Proactive contact — A Dell EMC Technical Support agent contacts you about the support case and helps you resolve the issue.
The available benets vary depending on the Dell EMC Service entitlement purchased for your device. For more information about
SupportAssist, go to Dell.com/supportassist.
Recycling or End-of-Life service information
Take back and recycling services are oered for this product in certain countries. If you want to dispose of system components, visit
Dell.com/recyclingworldwide and select the relevant country.
18 Getting help