Edbak VWFS95-L User Manual
Displayed below is the user manual for VWFS95-L by Edbak which is a product in the Video Wall Display Mounts category. This manual has pages.
Related Manuals
130kg
Installation Manual
VWFS9-L
90”-9” Video Wall Mount, Landscape
ver.1.1 0815
max load
capacity:
ver.1.1 0815p.1
2 3
1
TABLE OF CONTENTS: TOOLS REQUIRED
FOR INSTALLATION:
(NOT INCLUDED)
M
M
•
•
•
•M
•
•
• SpiritLevel
• Studnder
• Drill
• Drillbit
• Pencil
• Phillipsscrewdriver
• Wrench
Warning:
Please read this manual carefully prior to any installation to ensure proper assembly. The
assembly should be carried out in accordance with this manual by at least two persons with
sufficient qualifications and experience in assembly. EDBAK Company shall not be liable for any
material or property damage or bodily injury resulting from improper assembly. Therefore, you
should always follow the instructions:
- the accompanying elements are intended for mounting on walls of solid wood, brick or concrete
with the use of appropriate screws that are included into the product. In the case of any other
type of walls, please consult a person with sufficient qualifications in construction;
- during the assembly, please follow the instructions carefully. Otherwise it may result in product
damage or even personal injury;
- before the assembly you must ensure that under the surface of the wall where the mount is to
be fixed there are no power cables, water or sewage pipes or gas installations;
- make sure that the supporting surface will safely support the combined load of all attached
hardware and components.
- this product is intended for indoor use only;
- this product was designed, to be installed also in public areas.
- do not install the product if it is damaged;
- while fixing the screen on the mount, please ensure that the screws are of correct length and
diameter. In order to ensure the correct length and diameter, you may use the accompanying
plastic pads. Use of improper screws may result in permanent product damage. Extra caution
should be given with movable elements in order to prevent crushing or injury to your hands or
fingers. This manual indicates such elements so please note them carefully.
The terms of the product guarantee are set forth in the guarantee card.
Keep these instruction.
1. SAFETY INSTRUCTIONS:
ver.1.1 0815p.2
Frame
2x mounting adapters
4PARTS LIST:
ver.1.1 0815 p.3
Part list
AØ5x4
BØ8x4
cØ15xØ8,4x5x4
DØ15xØ8,4x10 x4
EM4x20 x4
FM5x20 x4
GM6x20 x4
HM8x20 x4
I10x80 x6
Jx6
Kx5
L
M8x80
x1
x2
Allen keys (included)
3, 4, 5, 6 x1
Allen Key
M M5x20
Ix4
J
5INSTALLATION TO BRICK OR CONCRETE WALL
• Fortheinstallationtwopeoplearerequired.
• LocatersttheMountonthewall-makesurethatthemountislevel.
• Markfourmountingholes.MakesurethattheMountislevel.Theframemustbe
xedwithminimumoffourscrews.
• Insertanchorsintheholes
• PlaceMountassemblyoveranchorsandsecurewithfourscrews
ATTENTION!
ATTENTION!
MAKESURE,THATTHEFRAMEISIN„0”POSITION”
ver.1.1 0815p.4
Jx4
J
x4
ATTENTION!
MAKESURE,THATTHEFRAMEISIN„0”POSITION”
6INSTALLATION TO WOOD STUD WALL
• Fortheinstallationtwopeoplearerequired.
• Useanedge-to-edgestudnder.Drawaverticallinedownthestudcenter.
• LocatersttheMount-makesurethatthemountislevel.
• Markfourmountingholes.MakesurethattheMountislevel.Theframemustbe
xedwithaminimumoffourscrews.
• Drillfourholes.
• Insertanchorsintheholes.
• PlaceMountassemblyoveranchorsandsecurewithfourscrews.
ATTENTION!
ver.1.1 0815p.5
DIS P L AY H E I G H T
A= DIS P AL Y H E I G H T
DIS P LAY WIDTH
A= DIS P LAY WIDTH
7MULTIPLEDISPLAYASSEMBLY-WITHOUTSPACERS
ver.1.1 0815p.6
• InstallrstMountonthewall-seestep5or6dependingonwallstructure
• Additionalframescanbeinstalledusingoptionalspacers(notincluded)
• Designateahorizontalandaverticallineonthewall.Lineswillhelpinmounting
additional Mounts.
• Slidespacersintotabopeningofmountedwallplate.
• Followmaininstructionsforcorrectinstallationofadditionalwallplates
8MULTIPLE DISPLAYS ASSEMBLY- USE OF OPTIONAL SPACERS
ATTENTION!
HORIZONTALORIENTATION VERTICALORIENTATION
ver.1.1 0815p.7
A
A x4; B x4
Ø5 Ø8
C x4; D x4
Ø15xØ8,4x5 Ø15xØ8,4x10
E x4; F x4
Gx4;Hx4 M4x20 M5x20 M6x20 M8x20
C, D
A, B
E,F,G,H
• Placedisplayfacedownonasoftsurface.
• Selectscrewdiameterandlengthwithmountingholesondisplay.Ifitisnecessary,
usespacersincludedwithscrewsset.
• Pulluprearpartofthemountingarms.
• Makesurethediamondmarkingsonthefrontplatesarelocatedinthecenterof
the display.
• Usechosenscrews(andspacersifitisnecessary)toconnectthefrontplatesto
the display.
9ATTACHINGFRONTPLATESTOTHEDISPLAY
ver.1.1 0815p.8
• AttachDisplaywiththefrontplatestotheframe-twopeoplearerequired.
• Placedisplayindesiredpositionontheframe.
• Secureeachfrontplateusingthescrew,whichislocatedatthebottomof
mounting arms.
10 ATTACHINGDISPLAYTOFRAME
ATTENTION!
SECURE ADAPTERS USING TWO SCREWS.
ATTENTION!
SECURE ADAPTERS USING TWO SCREWS.
ver.1.1 0815p.9
11 DISPLAY ADJUSTMENT
1 Springs Adjustment
2 HorizontalAdjustment
3 VerticalAdjustment
4 Tilting Adjustment
5 Display Micro adjustment
6 Security System
7 ServiceAccess-securityscrews
1.HORIZONTALADJUSTMENT
2.VERTICALADJUSTMENT
ver.1.1 0815p.10
A
B
M
L
II
II
II
III
I
I
1.1 1.2 1.3
4. DISPLAY MICRO ADJUSTMENT 5. SECURITY SYSTEM
3. TILTING ADJUSTMENT
6.SERVICEACCES
I
ver.1.1 0815p.11
A
K
12 CABLE MANAGEMENT
• Cableties“K”fixedtothecablemanagementslots,situatedonthebottomsections
of the frame, can be used to secure display cables.
Contact Details
Edbak Ltd.
Piotrowice186
23-107Strzyżewice
Poland
Tel. +48 81 562 81 19
Fax +48 81 562 82 90
www.edbak.com
info@edbak.com
ver.1.1 0815p.12