Table of Contents
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Projector Placement
- Removing and Attaching the Cable Cover
- Projector Connections
- Installing Batteries in the Remote Control
- Using the Projector on a Network
- Wired Network Projection
- Wireless Network Projection
- Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring)
- Screen Sharing
- Setting Up Projector Network E-Mail Alerts
- Setting Up Monitoring Using SNMP
- Controlling a Networked Projector Using a Web Browser
- Using Crestron Connected
- Registering a Digital Certificate on the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Selecting the Language for the Projector Menus
- Setting the Date and Time
- Image Shape
- Resizing the Image with the Wide and Tele Buttons
- Adjusting the Image Position
- Focusing the Image
- Remote Control Operation
- Selecting an Image Source
- Projection Modes
- Image Aspect Ratio
- Color Mode
- Adjusting the Hue, Saturation, and Brightness
- Adjusting Gamma
- Adjusting the Image Resolution
- Adjusting the Projector's Brightness Level
- Turning On Dynamic Contrast
- Controlling the Volume with the Volume Buttons
- Inverting the Audio Channels
- Selecting a Quick Startup Setting
- Projecting a PC Free Presentation
- Projecting in Content Playback Mode
- Adjusting Projector Features
- Shutting Off the Picture and Sound Temporarily
- Stopping Video Action Temporarily
- Zooming Into and Out of Images
- Using Multiple Projectors
- Projecting Multiple Images Simultaneously
- Projector Security Features
- Creating a User Pattern to Display
- Saving Settings to Memory and Using Saved Settings
- Copying Menu Settings Between Projectors
- Scheduling Projector Events
- Adjusting the Menu Settings
- Using the Projector's Menus
- Image Quality Settings - Image Menu
- Input Signal Settings - Signal I/O Menu
- Installation Settings - Installation Menu
- Display Settings - Display Menu
- Feature Settings - Operation Menu
- Administration Settings - Management Menu
- Network Settings - Network Menu
- Multiple Projector Operation Settings - Multi-Projection Menu
- Image Quality Memory Settings - Memory Menu
- Setup Settings - ECO Menu
- Initial Settings and Reset Options - Initial/All Settings Menu
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Using the Projector Menu Displays
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When "Not Supported" Message Appears
- Solutions When Only a Partial Image Appears
- Solutions When the Image is Not Rectangular
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions When an Afterimage Remains On the Projected Image
- Solutions to Sound Problems
- Solutions to Problems Using Content Playback
- Solving Projector or Remote Control Operation Problems
- Solving Network Problems
- Solutions When Wireless Authentication Fails
- Solutions When You Cannot Access the Projector Through the Web
- Solutions When Network Alert E-Mails are Not Received
- Solutions When the Image Contains Static During Network Projection
- Solutions When You Cannot Connect Using Screen Mirroring
- Solutions When the Image or Sound Contains Static When Using Screen Mirroring
- Solutions When the Projected Screen is not Shared Correctly
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- General Projector Specifications
- Projector Light Source Specifications
- Remote Control Specifications
- Projector Dimension Specifications
- Projector Electrical Specifications
- Projector Environmental Specifications
- Projector Safety and Approvals Specifications
- Supported Video Display Formats
- USB Display System Requirements
- Notices
- Recycling (U.S. and Canada)
- Important Safety Information
- Laser Safety Information
- Laser Light Source Warning
- Important Safety Instructions
- List of Safety Symbols (corresponding to IEC60950-1 A2)
- FCC Compliance Statement
- Binding Arbitration and Class Waiver
- Trademarks (U.S. and Canada)
- Trademarks (Latin America)
- Copyright Notice
Epson 805F User Manual
Displayed below is the user manual for 805F by Epson which is a product in the Data Projectors category. This manual has pages.
Related Manuals
PowerLite EB-800F/EB-805F
User's Guide
3
Contents
PowerLite EB-800F/EB-805F User's Guide.............................................................................................. 11
Introduction to Your Projector ................................................................................................................. 12
Projector Features.............................................................................................................................. 12
Product Box Contents.................................................................................................................... 13
Additional Components ................................................................................................................ 14
Optional Equipment and Replacement Parts................................................................................. 15
Warranty and Registration Information (U.S. and Canada) ........................................................... 16
Warranty and Registration Information (Latin America)................................................................. 17
Notations Used in the Documentation ................................................................................................ 17
Where to Go for Additional Information .............................................................................................. 17
Additional Projector Software and Manuals........................................................................................ 17
Projector Part Locations ..................................................................................................................... 19
Projector Parts - Front/Side ........................................................................................................... 20
Projector Parts - Top/Side ............................................................................................................. 21
Projector Parts - Interface.............................................................................................................. 22
Projector Parts - Base.................................................................................................................... 23
Projector Parts - Control Panel ...................................................................................................... 24
Projector Parts - Remote Control................................................................................................... 25
Setting Up the Projector ........................................................................................................................... 27
Projector Placement........................................................................................................................... 27
Projector Setup and Installation Options ....................................................................................... 28
Projection Distance........................................................................................................................ 30
Removing and Attaching the Cable Cover.......................................................................................... 33
Projector Connections........................................................................................................................ 34
Connecting to Computer Sources.................................................................................................. 35
Connecting to a Computer for VGA Video................................................................................. 35
Connecting to a Computer for HDMI Video and Audio.............................................................. 36
Connecting to a Computer for Sound........................................................................................ 37
Connecting to Video Sources ........................................................................................................ 37
Connecting to an HDMI Video Source ...................................................................................... 38
4
Connecting to a Composite Video Source ................................................................................ 39
Connecting to a Video Source for Sound .................................................................................. 39
Connecting External Output Devices............................................................................................. 40
Connecting to an External Computer Monitor ........................................................................... 40
Connecting to an External HDMI Monitor.................................................................................. 41
Connecting to External Speakers.............................................................................................. 42
Connecting to External USB Devices ............................................................................................ 42
USB Device Projection.............................................................................................................. 43
Connecting a USB Device or Camera to the Projector.............................................................. 43
Selecting the Connected USB Source ...................................................................................... 44
Disconnecting a USB Device From the Control Pad or Projector.............................................. 45
Connecting to a Document Camera .............................................................................................. 45
Connecting to an HDBaseT Transmitter ....................................................................................... 46
Connecting Multiple Projectors of the Same Model ....................................................................... 46
Multiple Projector Connection Menu Settings ........................................................................... 47
Installing Batteries in the Remote Control .......................................................................................... 48
Using the Projector on a Network ............................................................................................................ 51
Wired Network Projection................................................................................................................... 51
Connecting to a Wired Network ..................................................................................................... 52
Selecting Wired Network Settings ................................................................................................. 52
Wireless Network Projection .............................................................................................................. 55
Installing the Wireless LAN Module ............................................................................................... 56
Connecting Directly to a Smartphone or Tablet ............................................................................. 57
Using Quick Wireless Connection (Windows)................................................................................ 60
Selecting Wireless Network Settings Manually.............................................................................. 61
Wireless LAN Menu Settings .................................................................................................... 66
Selecting Wireless Network Settings in Windows.......................................................................... 69
Selecting Wireless Network Settings on Mac ................................................................................ 69
Setting Up Wireless Network Security ........................................................................................... 69
Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring) .......... 71
Screen Mirroring Restrictions ........................................................................................................ 71
Selecting Screen Mirroring Settings .............................................................................................. 72
Connecting for Screen Mirroring with a Windows 8.x/Windows 10 Computer ............................... 74
5
Connecting for Screen Mirroring with Miracast .............................................................................. 75
Screen Sharing .................................................................................................................................. 76
Projecting Screen Sharing Images ................................................................................................ 76
Setting Up Projector Network E-Mail Alerts ........................................................................................ 77
Network Projector E-mail Alert Messages ..................................................................................... 79
Setting Up Monitoring Using SNMP ................................................................................................... 79
Controlling a Networked Projector Using a Web Browser .................................................................. 80
Using Crestron Connected................................................................................................................. 84
Setting Up Crestron Connected..................................................................................................... 84
Controlling a Networked Projector Using Crestron Connected...................................................... 85
Registering a Digital Certificate on the Projector ................................................................................ 88
Importing a Web Server Certificate Using the Projector Menus..................................................... 88
Registering Digital Certificates from a Web Browser ..................................................................... 89
Digital Certificate Types................................................................................................................. 90
Using Basic Projector Features ............................................................................................................... 92
Turning On the Projector .................................................................................................................... 92
Using the Home Screen................................................................................................................. 94
Turning Off the Projector .................................................................................................................... 96
Selecting the Language for the Projector Menus................................................................................ 98
Setting the Date and Time.................................................................................................................. 98
Image Shape.................................................................................................................................... 100
Adjusting the Front Feet .............................................................................................................. 100
Correcting Image Shape with the Keystone Buttons.................................................................... 101
Correcting Image Shape with Quick Corner ................................................................................ 104
Correcting Image Shape with Arc Correction............................................................................... 107
Correcting Image Shape with Point Correction............................................................................ 110
Applying Saved Image Shape Settings ....................................................................................... 112
Resizing the Image with the Wide and Tele Buttons ........................................................................ 112
Adjusting the Image Position............................................................................................................ 113
Focusing the Image.......................................................................................................................... 115
Remote Control Operation ............................................................................................................... 117
Selecting an Image Source .............................................................................................................. 118
Projection Modes ............................................................................................................................. 120
6
Changing the Projection Mode Using the Remote Control .......................................................... 120
Changing the Projection Mode Using the Menus......................................................................... 121
Image Aspect Ratio .......................................................................................................................... 122
Changing the Image Aspect Ratio ............................................................................................... 123
Available Image Aspect Ratios.................................................................................................... 123
Color Mode....................................................................................................................................... 124
Changing the Color Mode............................................................................................................ 124
Available Color Modes................................................................................................................. 125
Adjusting the Hue, Saturation, and Brightness................................................................................. 126
Adjusting Gamma............................................................................................................................. 127
Adjusting the Image Resolution........................................................................................................ 129
Adjusting the Projector's Brightness Level ....................................................................................... 131
Constant Brightness Usage Hours .............................................................................................. 133
Turning On Dynamic Contrast.......................................................................................................... 135
Controlling the Volume with the Volume Buttons.............................................................................. 136
Inverting the Audio Channels ........................................................................................................... 137
Selecting a Quick Startup Setting..................................................................................................... 138
Projecting a PC Free Presentation ................................................................................................... 140
Supported PC Free File Types .................................................................................................... 140
Starting a PC Free Slideshow...................................................................................................... 142
Starting a PC Free Movie Presentation ....................................................................................... 144
PC Free Display Options ............................................................................................................. 146
Projecting in Content Playback Mode............................................................................................... 147
Switching to Content Playback Mode .......................................................................................... 147
Projecting a Playlist in Content Playback Mode........................................................................... 149
Creating a Playlist Using Epson Web Control.............................................................................. 150
Adding Effects to the Projected Image......................................................................................... 151
Adjusting Projector Features ................................................................................................................. 153
Shutting Off the Picture and Sound Temporarily .............................................................................. 153
Stopping Video Action Temporarily .................................................................................................. 154
Zooming Into and Out of Images ...................................................................................................... 154
Using Multiple Projectors ................................................................................................................. 155
Projector Identification System for Multiple Projector Control ...................................................... 156
7
Setting the Projector ID........................................................................................................... 156
Setting the Remote Control ID ................................................................................................ 157
Adjusting Color Uniformity ........................................................................................................... 158
Blending the Image Edges .......................................................................................................... 160
Matching the Image Colors ......................................................................................................... 162
Adjusting the Black Level ............................................................................................................ 164
Adjusting RGBCMY .................................................................................................................... 167
Scaling an Image......................................................................................................................... 169
Projecting Multiple Images Simultaneously...................................................................................... 171
Input Sources for Split Screen Projection .................................................................................... 174
Split Screen Projection Restrictions............................................................................................. 174
Projector Security Features.............................................................................................................. 175
Password Security Types ............................................................................................................ 175
Setting a Password ................................................................................................................. 175
Selecting Password Security Types........................................................................................ 177
Entering a Password to Use the Projector............................................................................... 178
Saving a User's Logo Image to Display................................................................................... 179
Locking the Projector's Buttons ................................................................................................... 181
Unlocking the Projector's Buttons ........................................................................................... 182
Installing a Security Cable ........................................................................................................... 182
Creating a User Pattern to Display ................................................................................................... 183
Saving Settings to Memory and Using Saved Settings .................................................................... 184
Copying Menu Settings Between Projectors .................................................................................... 186
Saving Settings to a USB Flash Drive.......................................................................................... 187
Transferring Settings from a USB Flash Drive ............................................................................. 188
Saving Settings to a Computer .................................................................................................... 189
Transferring Settings from a Computer ....................................................................................... 191
Scheduling Projector Events ............................................................................................................ 192
Saving a Scheduled Event........................................................................................................... 193
Viewing Scheduled Events .......................................................................................................... 195
Editing a Scheduled Event........................................................................................................... 196
Adjusting the Menu Settings .................................................................................................................. 199
Using the Projector's Menus............................................................................................................. 199
8
Image Quality Settings - Image Menu .............................................................................................. 201
Input Signal Settings - Signal I/O Menu............................................................................................ 205
Installation Settings - Installation Menu ............................................................................................ 209
Display Settings - Display Menu....................................................................................................... 215
Feature Settings - Operation Menu .................................................................................................. 218
Administration Settings - Management Menu................................................................................... 223
Event ID Code List....................................................................................................................... 227
Network Settings - Network Menu .................................................................................................... 230
Multiple Projector Operation Settings - Multi-Projection Menu ......................................................... 233
Image Quality Memory Settings - Memory Menu ............................................................................. 237
Setup Settings - ECO Menu ............................................................................................................. 238
Initial Settings and Reset Options - Initial/All Settings Menu ............................................................ 240
Maintaining and Transporting the Projector ......................................................................................... 242
Projector Maintenance ..................................................................................................................... 242
Cleaning the Lens........................................................................................................................ 242
Cleaning the Projector Case........................................................................................................ 243
Air Filter and Vent Maintenance ....................................................................................................... 243
Cleaning the Air Filter and Vents ................................................................................................. 244
Replacing the Air Filter ................................................................................................................ 247
Replacing the Remote Control Batteries .......................................................................................... 250
Updating the Firmware ..................................................................................................................... 252
Transporting the Projector................................................................................................................ 252
Solving Problems .................................................................................................................................... 253
Projection Problem Tips ................................................................................................................... 253
Projector Light Status ....................................................................................................................... 254
Using the Projector Menu Displays .................................................................................................. 257
Solving Image or Sound Problems ................................................................................................... 257
Solutions When No Image Appears............................................................................................. 257
Solutions When "No Signal" Message Appears........................................................................... 258
Displaying From a PC Laptop ................................................................................................. 259
Displaying From a Mac Laptop ............................................................................................... 260
Solutions When "Not Supported" Message Appears ................................................................... 260
Solutions When Only a Partial Image Appears............................................................................ 260
9
Solutions When the Image is Not Rectangular ............................................................................ 261
Solutions When the Image Contains Noise or Static ................................................................... 262
Solutions When the Image is Fuzzy or Blurry .............................................................................. 263
Solutions When the Image Brightness or Colors are Incorrect .................................................... 263
Solutions When an Afterimage Remains On the Projected Image............................................... 264
Solutions to Sound Problems ...................................................................................................... 264
Solutions to Problems Using Content Playback........................................................................... 265
Solving Projector or Remote Control Operation Problems ............................................................... 266
Solutions to Projector Power or Shut-Off Problems..................................................................... 266
Solutions to Remote Control Problems........................................................................................ 267
Solutions to Password Problems ................................................................................................. 268
Solutions When a Battery Message Appears .............................................................................. 269
Solving Network Problems ............................................................................................................... 269
Solutions When Wireless Authentication Fails ............................................................................ 269
Solutions When You Cannot Access the Projector Through the Web ......................................... 270
Solutions When Network Alert E-Mails are Not Received............................................................ 270
Solutions When the Image Contains Static During Network Projection ....................................... 271
Solutions When You Cannot Connect Using Screen Mirroring.................................................... 271
Solutions When the Image or Sound Contains Static When Using Screen Mirroring................... 272
Solutions When the Projected Screen is not Shared Correctly .................................................... 272
Where to Get Help (U.S. and Canada) ............................................................................................. 272
Where to Get Help (Latin America)................................................................................................... 273
Technical Specifications ........................................................................................................................ 276
General Projector Specifications ...................................................................................................... 276
Projector Light Source Specifications............................................................................................... 278
Remote Control Specifications ......................................................................................................... 278
Projector Dimension Specifications.................................................................................................. 278
Projector Electrical Specifications .................................................................................................... 279
Projector Environmental Specifications............................................................................................ 280
Projector Safety and Approvals Specifications................................................................................. 280
Supported Video Display Formats.................................................................................................... 280
USB Display System Requirements................................................................................................. 283
10
Notices ..................................................................................................................................................... 284
Recycling (U.S. and Canada)........................................................................................................... 284
Important Safety Information ............................................................................................................ 284
Laser Safety Information .................................................................................................................. 285
Laser Light Source Warning ............................................................................................................ 288
Important Safety Instructions............................................................................................................ 288
Restriction of Use ........................................................................................................................ 293
List of Safety Symbols (corresponding to IEC60950-1 A2)............................................................... 293
FCC Compliance Statement............................................................................................................. 297
Binding Arbitration and Class Waiver ............................................................................................... 298
Trademarks (U.S. and Canada) ....................................................................................................... 301
Trademarks (Latin America)............................................................................................................. 302
Copyright Notice............................................................................................................................... 303
A Note Concerning Responsible Use of Copyrighted Materials................................................... 303
Copyright Attribution.................................................................................................................... 304
11
PowerLite EB-800F/EB-805F User's Guide
Welcome to the PowerLite EB-800F/EB-805F User's Guide.
For a printable PDF copy of this guide, click here.
Note: Availability of products in this guide varies by country.
12
Introduction to Your Projector
Refer to these sections to learn more about your projector and this manual.
Projector Features
Notations Used in the Documentation
Where to Go for Additional Information
Additional Projector Software and Manuals
Projector Part Locations
Projector Features
The PowerLite EB-800F/EB-805F projectors includes these special features:
Bright, high-resolution projection system
• Up to 5000 lumens of color brightness (color light output) and white brightness (white light output)
Note: Color brightness (color light output) and white brightness (white light output) will vary depending
on usage conditions. Color light output measured in accordance with IDMS 15.4; white light output
measured in accordance with ISO 21118.
• 1080p native resolution
Flexible connectivity
• Three HDMI ports for computer or video device connection
• Plug-and-play USB projection and audio for instant setup
• Optional HDBaseT control pad with single connection to projector for simplified cabling and installation
• Wired and wireless (optional accessory required) network support for projection
• Screen mirroring to connect your mobile device wirelessly using Miracast technology (optional
accessory may be required)
• Projector monitoring and control via remote network computer
• PC Free photo slide shows via connected USB memory devices or Epson document camera (only on
models that support the slide show function)
• One HDMI Out port for connecting an external display or linking another compatible projector
• Use Epson iProjection (Windows/Mac) to simultaneously project up to four images from network
computers or mobile devices (optional accessory may be required)
13
• Projection from an iOS device, Android device, or Chromebook with the free Epson iProjection app;
visit epson.com/iprojection (U.S.), epson.ca/iprojection (Canada), or latin.epson.com/iprojection (Latin
America) for more information (optional accessory may be required)
Innovative display and operation features
• Long-life laser light source
• Easy-to-use and free content management software for creating amazing effects and experiences for
digital signage
• Support for side-by-side projector mounting
• High digital zoom ratio for larger images in shorter projection distances
• 2,500,000:1 dynamic contrast ratio and Dynamic Contrast control for sharp, detailed images
• Built-in closed captioning decoder
• Powerful 16 W (2 x 8 W) speaker system with audio out port for connecting external speakers
• Epson's Direct Power On and Auto Power On features for quick and easy setup
• Support for Crestron Connected network monitoring systems
• Network message broadcast system to project timely messages to all networked projectors
Product Box Contents
Additional Components
Optional Equipment and Replacement Parts
Warranty and Registration Information (U.S. and Canada)
Warranty and Registration Information (Latin America)
Parent topic: Introduction to Your Projector
Product Box Contents
Save all the packaging in case you need to ship the projector. Always use the original packaging (or
equivalent) when shipping.
14
Make sure your projector box included all of these parts:
1 Projector
2 Remote control
3 Remote control batteries (2 AA alkaline)
4 Power cord
5 Lens cap
6 Cable cover
Parent topic: Projector Features
Additional Components
Depending on how you plan to use the projector, you may need to obtain additional components.
Note: To connect a Mac that does not include a compatible video output port, you need to obtain an
adapter that allows you to connect to an input port on the projector. Contact Apple for compatible
adapter options. To connect a smartphone or tablet, you may need to obtain an adapter that allows you
to connect to the projector. This allows you to mirror your smartphone or tablet screens, watch movies,
and more. Contact your device manufacturer for compatible adapter options.
Unless listed as available from Epson in this table, see your local computer or electronics dealer for
purchase information.
15
Signal or connection
type
Additional component necessary
Composite video RCA-style video or A/V cable
HDMI Compatible HDMI cable
Available for purchase from Epson or an authorized Epson reseller (U.S.
and Canada).
Available for purchase from an authorized Epson reseller (Latin America).
Note: Older Mac computers (2009 and earlier) may not support HDMI
audio.
Audio from certain ports Commercially available audio cable compatible with your device
VGA To connect a computer through its VGA port to the projector's VGA video
port, you need a VGA computer cable.
USB Compatible USB cable
Parent topic: Projector Features
Optional Equipment and Replacement Parts
U.S. and Canada: You can purchase screens, other optional accessories, and replacement parts from
an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the
U.S. or 800-807-7766 in Canada. Or you can purchase online at epsonstore.com (U.S. sales) or
epsonstore.ca (Canadian sales).
Latin America: You can purchase optional accessories and replacement parts from an Epson
authorized reseller. To find the nearest reseller, go to latin.epson.com. Or you can contact your nearest
sales office as described in "Where to Get Help".
Note: Availability of accessories varies by country.
Epson offers the following optional accessories and replacement parts for your projector:
U.S. and Canada:
Option or part Part number
Replacement air filter (ELPAF56) V13H134A56
16
Option or part Part number
Ultra-short throw wall mount (ELPMB62) V12HA06A05
Control Pad (ELPHD02) V12H007A14
HDBaseT Transmitter (ELPHD01) V12H547020
Wireless LAN module (ELPAP11) V12H005A02
Epson DC-07 document camera (ELPDC07) V12H759020
Epson DC-13 document camera (ELPDC13) V12H757020
Epson DC-21 document camera (ELPDC21) V12H758020
PowerLite Pilot 3 connection and control box (ELPCB03) V12H927020
Active speakers (ELPSP02) V12H467020
USB extension cable (ELPKC31) V12H525001
PixiePlus control system ELPSP10
In addition to the accessories listed above, extended service plans are available.
Latin America:
Option or part Part number
Replacement air filter (ELPAF56) V13H134A56
Ultra-short throw wall mount (ELPMB62) V12HA06A05
HDBaseT Transmitter (ELPHD01) V12H547020
Wireless LAN module (ELPAP11) V12H005A02
Parent topic: Projector Features
Warranty and Registration Information (U.S. and Canada)
Your projector comes with a basic warranty that lets you project with confidence. For details, see the
warranty brochure that came with your projector.
Register your product online at this site: epson.com/webreg
Registering also lets you receive special updates on new accessories, products, and services.
Parent topic: Projector Features
17
Warranty and Registration Information (Latin America)
Your projector comes with a basic warranty that lets you project with confidence. For details, see the
warranty that came with your projector.
Register your product online at latin.epson.com/support, search for your product, and select Register.
Registering also lets you receive special updates on new accessories, products, and services.
Parent topic: Projector Features
Notations Used in the Documentation
Follow the guidelines in these notations as you read your documentation:
•Warnings must be followed carefully to avoid bodily injury.
•Cautions must be observed to avoid damage to your equipment.
•Notes contain important information about your projector.
•Tips contain additional projection information.
Parent topic: Introduction to Your Projector
Where to Go for Additional Information
Need quick help on using your projector? Here's where to look for help:
•epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Caribbean)
View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24
hours a day.
• If you still need help after checking this manual and any other sources listed here, you can use the
Epson PrivateLine Support service to get help fast (U.S. and Canada only). For details, see "Where to
Get Help."
Parent topic: Introduction to Your Projector
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Additional Projector Software and Manuals
After connecting and setting up the projector, install the projector software as necessary. You may need
to install it from a software CD, if included, or download the software and manuals as necessary.
18
You can install the projector software programs listed here and view their manuals for instructions on
using them.
Note: If you still need help after checking this manual and the sources listed here, you can use the
Epson PrivateLine Support service to get help fast (U.S. and Canada only). For details, see "Where to
Get Help."
Projector software Manual Description
Epson Projector
Management (Windows
only)
Epson Projector
Management Operation
Guide
Lets you update firmware and monitor and
control your projector through the network.
You can download the latest software and
documentation from the Epson web site. Go to
epson.com/support (U.S.), epson.ca/support
(Canada), or latin.epson.com/support
(Caribbean) and select your projector.
Epson iProjection
(Windows/Mac)
Epson iProjection
Operation Guide
(Windows/Mac)
Lets you project the computer screens of
users over a network.
You can download the latest software and
documentation from the Epson web site. Go to
epson.com/support (U.S.), epson.ca/support
(Canada), or latin.epson.com/support
(Caribbean) and select your projector.
Epson iProjection app Instructions are included
with the app (instructions
included with the app
available only in English)
Lets you project from an iOS device, Android
device, or Chromebook if your projector is
connected to a network that includes a
wireless access point.
Visit epson.com/support (U.S.),
epson.ca/support (Canada), or
latin.epson.com/support (Caribbean) for more
information. (Software available only in
English.)
—Open Source Software
License
You can download this document from the
Epson web site. Go to epson.com/support
(U.S.), epson.ca/support (Canada), or
latin.epson.com/support (Caribbean) and
select your projector. (Document available
only in English.)
19
Projector software Manual Description
Epson Projector Content
Manager
Epson Projector Content
Manager Operation Guide
Lets you add images and movies to playlists,
and save them on a USB device; insert the
USB device into the projector to project your
playlist content without using a cable
connection.
You can download the latest software and
documentation from the Epson web site. Go to
epson.com/support (U.S.), epson.ca/support
(Canada), or latin.epson.com/support
(Caribbean) and select your projector.
Epson Creative Projection
(iOS only)
Instructions are included
with the app (instructions
included with the app
available only in English)
Lets you create custom content using built-in
templates and stamps, and wirelessly transfer
it to the projector if it is connected to a network
that includes a wireless access point.
You can download the latest software and
documentation from the Apple App Store.
Parent topic: Introduction to Your Projector
Projector Part Locations
Check the projector part illustrations to learn about the parts on your projector.
Projector Parts - Front/Side
Projector Parts - Top/Side
Projector Parts - Interface
Projector Parts - Base
Projector Parts - Control Panel
Projector Parts - Remote Control
Parent topic: Introduction to Your Projector
20
Projector Parts - Front/Side
1 Power button
2 Status lights
3 Remote control receiver
4 Exhaust vent
5 Front cover
6 Control panel
22
7 Power inlet
8 Security cable installation slot
Parent topic: Projector Part Locations
Projector Parts - Interface
1USB-A1/USB-A2 ports
2USB-B port
3LAN port
4Computer1/Computer2 Monitor Out ports
5HDMI1/HDMI2/HDMI3 ports
6HDBaseT port
7HDMI Out port
8DC Out (2.0A) port
9RS-232C port
10 Audio Out port
11 Audio/Audio1/Audio2 ports
12 Video port
Parent topic: Projector Part Locations
24
Projector Parts - Control Panel
1Menu button (accesses projector menu system)
2Home button (accesses projector Home screen)
3Enter button (selects options)
4 Vertical keystone adjustment buttons (display the adjustment screen and adjust screen shape)
and arrow buttons
5Source Search button (searches for connected video sources)
6Esc button (cancels/exits functions)
7W/T(Wide/Tele) buttons (adjust projected image size) and arrow buttons
Parent topic: Projector Part Locations
25
Projector Parts - Remote Control
1 Power button
2HDMI button (cycles through connected HDMI sources)
26
3Computer button
4Keystone button (corrects distortion in the image)
5 Numeric buttons
6Auto button (automatically adjusts position, tracking, and sync settings)
7Num button (when held down, switches numeric buttons to number function)
8Menu button (accesses projector menu system)
9 Arrow buttons (move through on-screen options)
10 (Enter) button (selects options)
11 User button (customizable for different functions)
12 Color Mode button (selects display modes)
13 Aspect button (selects the image aspect ratio)
14 E-Zoom +/–buttons (zoom into and out of the image)
15 A/V Mute button (turns off picture and sound)
16 Split button (splits the screen between two image sources)
17 Home button (accesses projector Home screen)
18 Freeze button (stops video action)
19 Volume up/down buttons (adjust speaker volume)
20 Default button (resets the selected setting to its default value)
21 Esc button (cancels/exits functions and controls wireless mouse functions)
22 ID button (selects a projector to use with the remote control)
23 Effect button (changes the shape and color of an image)
24 USB Viewer button (displays the playlists stored on the USB flash drive)
25 LAN button (connects to a network source)
26 USB button (cycles through connected USB sources)
27 Source Search button (searches for connected sources)
28 Remote control emitter
Parent topic: Projector Part Locations
27
Setting Up the Projector
Follow the instructions in these sections to set up your projector for use.
Projector Placement
Removing and Attaching the Cable Cover
Projector Connections
Installing Batteries in the Remote Control
Projector Placement
Your ultra-short throw projector is designed to be installed on a wall (with a wall mount).
You can also place the projector on a flat surface such as a desk or table to project in a portable setup.
Keep these considerations in mind as you select a projector location:
• Follow the instructions in the Installation Guide provided with your mounting hardware to install the
projector.
• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or
next to anything that could block the vents.
• If you are using the projector at altitudes above 4921 feet (1500 m), set the High Altitude Mode
setting to On in the projector's Installation menu to ensure the projector's internal temperature is
regulated properly.
• Position the projector within reach of a grounded electrical outlet or extension cord.
• If installing vertically on a table, a commercially available mount compatible with the VESA Mounting
Interface Standard (100 x 100 mm) is required.
• If installing on a wall, the wall mount (V12HA06A05) is required.
• If the projector is not mounted, place it on a sturdy, level surface.
• Place the projector so it squarely faces the screen, not at an angle. If you cannot install the projector
squarely facing the screen, correct any resulting image distortion using the projector controls.
• Try not to set up the projector in locations subject to high humidity and dust, or in locations subject to
smoke from fires or tobacco smoke.
Projector Setup and Installation Options
Projection Distance
Parent topic: Setting Up the Projector
28
Projector Setup and Installation Options
You can set up or install your projector in the following ways:
Mounted on the wall or ceiling
Mounted on the wall or ceiling and projecting from behind a translucent screen
29
Front projection from a table or portable cart
Rear projection from a table or portable cart behind a translucent screen
Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an
angle.
If you place the projector vertically, turn on the Vertical Installation setting in the projector's Installation
menu.
If you install the projector to a fixed location, turn on the Fixed Installation setting in the projector's
Installation menu.
If you project from a table or portable cart, be sure to select the correct Projection option in the
projector's menu system.
Parent topic: Projector Placement
30
Projection Distance
The distance at which you place the projector from the screen determines the approximate size of the
image. The image size increases the farther the projector is from the screen, but can vary depending on
the zoom factor, aspect ratio, and other settings.
Use the tables here to determine approximately how far to place the projector from the screen based on
the size of the projected image. (Conversion figures may have been rounded up or down.)
You can also use the Projection Distance Calculator here (U.S.), here (Canada), or here (Caribbean).
1 Projection distance
2 Distance from the top of the projector to the top of the image (when projecting from a wall or table
mount) or base of the image (when projecting from a flat surface)
31
3 Distance from the top of the projector to the base of the image (when projecting from a wall or
table mount) or top of the image (when projecting from a flat surface)
4 Distance from the center of the lens to the rear of the projector: 9.2 inches (23.3 cm)
16:9 Aspect Ratio Image or Screen
Screen or image size Projection distance (1)
Wide
Offset from lens center
(2)
Offset from lens center
(3)
65 inches (165.1 cm) 15.4 inches (39.2 cm) 4.1 inches (10.5 cm) 36.0 inches (91.5 cm)
70 inches (177.8 cm) 16.7 inches (42.3 cm) 4.5 inches (11.4 cm) 38.8 inches (98.5 cm)
75 inches (190.5 cm) 17.9 inches (45.5 cm) 4.8 inches (12.2 cm) 41.6 inches (105.6 cm)
80 inches (203.2 cm) 19.2 inches (48.7 cm) 5.1 inches (13.0 cm) 44.3 inches (112.6 cm)
85 inches (215.9 cm) 20.4 inches (51.8 cm) 5.4 inches (13.8 cm) 47.1 inches (119.6 cm)
90 inches (228.6 cm) 21.7 inches (55.0 cm) 5.8 inches (14.6 cm) 49.9 inches (126.7 cm)
100 inches (254 cm) 24.1 inches (61.3 cm) 6.4 inches (16.2 cm) 55.4 inches (140.7 cm)
110 inches (279.4 cm) 26.6 inches (67.6 cm) 7.0 inches (17.8 cm) 61.0 inches (154.8 cm)
120 inches (304.8 cm) 29.1 inches (74.0 cm) 7.7 inches (19.5 cm) 66.5 inches (168.9 cm)
130 inches (330.2 cm) 31.6 inches (80.3 cm) 8.3 inches (21.1 cm) 72.1 inches (183.0 cm)
16:10 Aspect Ratio Image or Screen
Screen or image size Projection distance (1)
Wide
Offset from lens center
(2)
Offset from lens center
(3)
60 inches (152.4 cm) 15.4 inches (39.1 cm) 4.1 inches (10.5 cm) 36.0 inches (91.3 cm)
65 inches (165.1 cm) 16.7 inches (42.5 cm) 4.5 inches (11.4 cm) 38.9 inches (98.9 cm)
70 inches (177.8 cm) 18.1 inches (45.9 cm) 4.8 inches (12.3 cm) 41.9 inches (106.5 cm)
75 inches (190.5 cm) 19.4 inches (49.3 cm) 5.2 inches (13.1 cm) 44.9 inches (114.1 cm)
80 inches (203.2 cm) 20.8 inches (52.8 cm) 5.5 inches (14.0 cm) 47.9 inches (121.7 cm)
85 inches (215.9 cm) 22.1 inches (56.2 cm) 5.9 inches (14.9 cm) 50.9 inches (129.3 cm)
90 inches (228.6 cm) 23.5 inches (59.6 cm) 6.2 inches (15.8 cm) 53.9 inches (136.9 cm)
32
16:10 Aspect Ratio Image or Screen
Screen or image size Projection distance (1)
Wide
Offset from lens center
(2)
Offset from lens center
(3)
95 inches (241.3 cm) 24.8 inches (63.0 cm) 6.6 inches (16.7 cm) 56.9 inches (144.5 cm)
100 inches (254 cm) 26.1 inches (66.4 cm) 6.9 inches (17.5 cm) 59.9 inches (152.1 cm)
110 inches (279.4 cm) 28.9 inches (73.3 cm) 7.6 inches (19.3 cm) 65.9 inches (167.4 cm)
120 inches (304.8 cm) 31.5 inches (80.1 cm) 8.3 inches (21.0 cm) 71.9 inches (182.6 cm)
4:3 Aspect Ratio Image or Screen
Screen or image size Projection distance (1)
Wide
Offset from lens center
(2)
Offset from lens center
(3)
53 inches (134.6 cm) 15.4 inches (39.1 cm) 4.1 inches (10.5 cm) 36.0 inches (91.3 cm)
55 inches (139.7 cm) 16.0 inches (40.6 cm) 4.3 inches (10.9 cm) 37.3 inches (94.7 cm)
60 inches (152.4 cm) 17.5 inches (44.5 cm) 4.7 inches (11.9 cm) 40.7 inches (103.3 cm)
65 inches (165.1 cm) 19.1 inches (48.4 cm) 5.1 inches (12.9 cm) 44.1 inches (112.0 cm)
70 inches (177.8 cm) 20.6 inches (52.2 cm) 5.5 inches (13.9 cm) 47.5 inches (120.6 cm)
75 inches (190.5 cm) 22.1 inches (56.1 cm) 5.9 inches (14.9 cm) 50.9 inches (129.2 cm)
80 inches (203.2 cm) 23.6 inches (60.0 cm) 6.3 inches (15.9 cm) 54.3 inches (137.8 cm)
85 inches (215.9 cm) 25.2 inches (63.9 cm) 6.7 inches (16.9 cm) 57.6 inches (146.4 cm)
90 inches (228.6 cm) 26.7 inches (67.7 cm) 7.1 inches (17.9 cm) 61.0 inches (155.0 cm)
100 inches (254 cm) 29.7 inches (75.5 cm) 7.8 inches (19.8 cm) 67.8 inches (172.2 cm)
105 inches (279.4 cm) 31.3 inches (79.4 cm) 8.2 inches (20.8 cm) 71.2 inches (180.9 cm)
21:9 Aspect Ratio Image or Screen
Screen or image size Projection distance (1)
Wide to Tele
Offset from lens center
(2)
Offset from lens center
(3)
62 inches (157.5 cm) 15.5 inches (39.4 cm) 8.0 inches (20.3 cm) 32.4 inches (82.3 cm)
65 inches (165.1 cm) 16.3 inches (41.4 cm) 8.4 inches (21.3 cm) 34.0 inches (86.3 cm)
33
21:9 Aspect Ratio Image or Screen
Screen or image size Projection distance (1)
Wide to Tele
Offset from lens center
(2)
Offset from lens center
(3)
70 inches (177.8 cm) 17.6 inches (44.7 cm) 9.0 inches (22.9 cm) 36.6 inches (93.0 cm)
75 inches (190.5 cm) 18.9 inches (48.1 cm) 9.7 inches (24.5 cm) 39.2 inches (99.6 cm)
80 inches (203.2 cm) 20.2 inches (51.4 cm) 10.3 inches (26.2 cm) 41.8 inches (106.2 cm)
85 inches (215.9 cm) 21.6 inches (54.8 cm) 11.0 inches (27.8 cm) 44.5 inches (112.9 cm)
90 inches (228.6 cm) 22.9 inches (58.1 cm) 11.6 inches (29.5 cm) 47.1 inches (119.5 cm)
100 inches (254 cm) 25.5 inches (64.8 cm) 12.9 inches (32.7 cm) 52.3 inches (132.8 cm)
110 inches (279.4 cm) 28.2 inches (71.5 cm) 14.2 inches (36.0 cm) 57.5 inches (146.1 cm)
120 inches (304.8 cm) 30.8 inches (78.1 cm) 15.5 inches (39.3 cm) 62.7 inches (159.3 cm)
123 inches (317.5 cm) 31.5 inches (80.1 cm) 15.9 inches (40.3 cm) 64.3 inches (163.3 cm)
Parent topic: Projector Placement
Removing and Attaching the Cable Cover
Before you can connect equipment to your projector, you need to remove the cable cover.
34
1. Loosen both of the screws securing the cable cover and lift off the cable cover.
To attach the cable cover, replace the cable cover and tighten the cable cover screws.
Parent topic: Setting Up the Projector
Projector Connections
See these sections to connect the projector to a variety of projection sources.
Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode
to ensure the projector's internal temperature is regulated properly.
Connecting to Computer Sources
Connecting to Video Sources
Connecting External Output Devices
Connecting to External USB Devices
35
Connecting to a Document Camera
Connecting to an HDBaseT Transmitter
Connecting Multiple Projectors of the Same Model
Parent topic: Setting Up the Projector
Related references
Installation Settings - Installation Menu
Additional Components
Connecting to Computer Sources
Follow the instructions in these sections to connect a computer to the projector.
Connecting to a Computer for VGA Video
Connecting to a Computer for HDMI Video and Audio
Connecting to a Computer for Sound
Parent topic: Projector Connections
Connecting to a Computer for VGA Video
You can connect the projector to your computer using a VGA computer cable.
Note: To connect a Mac that does not include a compatible video output port, you need to obtain an
adapter that allows you to connect to an input port on the projector. Contact Apple for compatible
adapter options. To connect a smartphone or tablet, you may need to obtain an adapter that allows you
to connect to the projector. This allows you to mirror your smartphone or tablet screens, watch movies,
and more. Contact your device manufacturer for compatible adapter options.
Note: To project an image source connected to the Computer2/Monitor Out port, set Monitor Out Port
to Computer2 in the projector's Signal I/O menu.
1. If necessary, disconnect your computer's monitor cable.
2. Connect the VGA computer cable to your computer's monitor port.
36
3. Connect the other end to a Computer port on the projector.
4. Tighten the screws on the VGA connector.
Parent topic: Connecting to Computer Sources
Connecting to a Computer for HDMI Video and Audio
If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable.
Note: To connect a Mac that does not include a compatible video output port, you need to obtain an
adapter that allows you to connect to an input port on the projector. Contact Apple for compatible
adapter options. To connect a smartphone or tablet, you may need to obtain an adapter that allows you
to connect to the projector. This allows you to mirror your smartphone or tablet screens, watch movies,
and more. Contact your device manufacturer for compatible adapter options.
1. Connect the HDMI cable to your computer's HDMI output port.
2. Connect the other end to one of the projector's HDMI ports.
37
Note: If you have problems hearing audio through the HDMI connection, connect one end of an optional
3.5 mm stereo mini-jack audio cable to the projector's Audio port and the other end to your computer's
audio out port. Then select the audio port you connected to as the HDMI Audio Output setting in the
Signal I/O menu.
Parent topic: Connecting to Computer Sources
Connecting to a Computer for Sound
If your computer presentation includes sound and you did not connect it to a projector port that receives
audio signals, you can still play sound through the projector's speaker system. Just connect an optional
3.5 mm stereo mini-jack audio cable as described here.
Note: Make sure the audio cable you use is labeled "No resistance."
1. Connect the audio cable to your laptop's headphone or audio-out jack, or your desktop's speaker or
audio-out port.
2. Connect the other end to the Audio port that corresponds to the Computer port you are using.
Parent topic: Connecting to Computer Sources
Connecting to Video Sources
Follow the instructions in these sections to connect video devices to the projector.
Connecting to an HDMI Video Source
Connecting to a Composite Video Source
Connecting to a Video Source for Sound
Parent topic: Projector Connections
38
Connecting to an HDMI Video Source
If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.
The HDMI connection provides the best image quality. You can also connect your video source to an
HDMI port on the control pad (optional accessory required).
Caution: Do not turn on the video source before connecting it to the projector. Doing so could damage
the projector.
Note: If you are connecting a video source to an HDMI port on the optional control pad, enable Connect
ELPHD02 in the HDBaseT settings of the projector's Signal I/O menu.
1. Connect the HDMI cable to your video source's HDMI output port.
2. Connect the other end to one of the projector's HDMI ports. Connect the other end to one of the
HDMI ports on the projector or the optional control pad, if installed.
Note: If you have problems hearing audio through the HDMI connection, you can use one of the
projector's audio ports instead to play sound. Connect one end of an optional 3.5 mm stereo mini-jack
audio cable to one of the projector's audio ports and the other end to your computer's audio out port.
Then select the audio port you connected to as the HDMI Audio Output setting in the Signal I/O menu.
Parent topic: Connecting to Video Sources
Related references
Input Signal Settings - Signal I/O Menu
39
Connecting to a Composite Video Source
If your video source has a composite video port, you can connect it to the projector using an optional
RCA-style video or A/V cable.
1. Connect the cable with the yellow connector to your video source's yellow video output port.
2. Connect the other end to the projector's Video port.
Parent topic: Connecting to Video Sources
Connecting to a Video Source for Sound
You can play sound through the projector's speaker system if your video source has audio output ports.
If you are projecting video using the Video or a Computer port, connect the projector to the video source
using an optional stereo mini-jack audio cable.
Note: If you connected your video source to the projector using an HDMI cable, the audio signal is
transferred with the video signal; you do not need an additional cable for sound.
1. Connect the audio cable to your video source's audio-out ports.
40
2. Connect the other end of the cable to the projector's Audio port that corresponds to the Computer
or Video port you are using for video.
Parent topic: Connecting to Video Sources
Connecting External Output Devices
See these sections to connect the projector to external output devices.
Connecting to an External Computer Monitor
Connecting to an External HDMI Monitor
Connecting to External Speakers
Parent topic: Projector Connections
Connecting to an External Computer Monitor
If you connected a computer to the projector's Computer1 port, you can also connect an external
monitor to the projector. This lets you see your presentation on the external monitor even when the
projected image is not visible.
To output images to an external VGA monitor, set the Monitor Out Port setting to Monitor Out in the
projector's Signal I/O menu.
If you want to output images to an external monitor when the projector is not projecting any images, you
need to select Always On as the A/V Output setting in the projector's Signal I/O menu.
Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.
1. Make sure your computer is connected to the projector's Computer port. If there are two computer
ports, make sure you use the Computer1 port.
41
2. Connect the external monitor's cable to your projector's Computer2/Monitor Out port.
Parent topic: Connecting External Output Devices
Related references
Input Signal Settings - Signal I/O Menu
Connecting to an External HDMI Monitor
You can connect an external HDMI monitor to the projector's HDMI Out port and use it to display
projected content from the currently selected input source (except for the Home screen and images from
a Screen Mirroring source).
1. Connect an HDMI cable to your monitor's HDMI input port.
2. Connect the other end to the projector's HDMI Out port.
Parent topic: Connecting External Output Devices
42
Connecting to External Speakers
To enhance the sound from your presentation, you can connect the projector to external self-powered
speakers. You can control the volume using the projector's remote control.
You can also connect the projector to an amplifier with speakers.
Set the Audio Out Device setting to AV System in the projector's Signal I/O menu. When an
audio/video system is not connected to the projector, audio is output from the external speakers even if
Audio Out Device is set to AV System.
If you want to output audio from the external speakers when the projector is not projecting images, you
need to select Always On as the A/V Output setting in the projector's Signal I/O menu.
Note: The projector's built-in speaker system is disabled when you connect external speakers.
1. Make sure your computer or video source is connected to the projector with both audio and video
cables as necessary.
2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-
jack cable, or another type of cable or adapter.
3. Connect one end of the cable to your external speakers as necessary.
4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port.
Parent topic: Connecting External Output Devices
Related references
Input Signal Settings - Signal I/O Menu
Connecting to External USB Devices
Follow the instructions in these sections to connect external USB devices to the projector.
43
USB Device Projection
Connecting a USB Device or Camera to the Projector
Selecting the Connected USB Source
Disconnecting a USB Device From the Control Pad or Projector
Parent topic: Projector Connections
USB Device Projection
You can project images and other content without using a computer or video device by connecting any of
these devices to your projector or to the optional control pad:
• USB flash drive
• Digital camera or smartphone
• USB hard drive
Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices,
and must be USB Mass Storage Class-compliant.
Note: USB hard drives must meet these requirements:
• USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported)
• Formatted in FAT16 or FAT32
• Self-powered by their own AC power supplies (bus-powered hard drives are not recommended)
• Does not have multiple partitions
You can project slide shows from image files on a connected USB device.
You can also project playlists that contain images and movies saved on a USB device when in Content
Playback mode.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slideshow
Starting a PC Free Movie Presentation
Connecting a USB Device or Camera to the Projector
You can connect your USB device or camera to the projector's USB-A port and use it to project images
and other content.
1. If your USB device came with a power adapter, plug the device into an electrical outlet.
44
2. Connect the USB cable (or USB flash drive) to one of the projector's USB-A ports.
Note: Use the USB cable supplied with or specified for use with your device. Do not connect a USB
hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly.
3. Connect the other end of the cable (if applicable) to your device.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slideshow
Starting a PC Free Movie Presentation
Selecting the Connected USB Source
You can switch the projector's display to the source you connected to one of the ports. To display the
connected USB device, select the USB1 source.
Note: If you have connected a document camera using a USB cable, select the USB2 source.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the USB or Source Search button on the remote control and select the USB1 or USB2
source.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slideshow
Starting a PC Free Movie Presentation
45
Disconnecting a USB Device From the Control Pad or Projector
When you finish presenting with a connected USB device, you must prepare to disconnect the device
from the control pad (optional accessory required) or projector.
1. If the device has a power button, turn off and unplug the device.
2. Disconnect the USB device (or cable) from the control pad or projector.
Parent topic: Connecting to External USB Devices
Related tasks
Starting a PC Free Slideshow
Starting a PC Free Movie Presentation
Connecting to a Document Camera
You can connect a document camera to your projector to project images viewed by the camera.
Note: If you connect a document camera to one of the USB-A ports on the projector, select the USB2
source to display the image. You cannot simultaneously connect two document cameras to the USB-A
ports.
Depending on your Epson document camera model, do one of the following to connect the document
camera to your projector:
• For the Epson DC-07 document camera, locate the USB cable that came with the camera and
connect it to the projector's port and to the document camera's USB Type B port.
• For the Epson DC-11 document camera, connect it to the projector's Computer or Video port and to
the corresponding port on the document camera. See the document camera manual for details.
• For the Epson DC-12 document camera, connect it to the projector's HDMI,Computer, or Video port
and to the corresponding port on the document camera. See the document camera manual for details.
• For the Epson DC-13 document camera, connect it to the projector's HDMI,Computer, or Video port
and to the corresponding port on the document camera. See the document camera manual for details.
• For the Epson DC-20 document camera, connect it to the projector's HDMI,Computer, or Video port
and to the corresponding port on the document camera. See the document camera manual for details.
• For the Epson DC-21 document camera, connect it to the projector's HDMI,Computer, or Video port
and to the corresponding port on the document camera. See the document camera manual for details.
Note: For additional features supported by software, connect your document camera to your computer
instead of the projector. See the document camera manual for details.
46
Parent topic: Projector Connections
Connecting to an HDBaseT Transmitter
To send an HDMI or RS-232C signal over a long distance, you can connect the projector to an optional
HDBaseT transmitter using a 100Base-TX network cable. This is useful when you want to send a signal
to or control the projector from a remote location, such as in a hall or event site, since you can use a
network cable up to 328 feet (100 m) in length. To ensure proper data transmission, use a Category 5e
STP cable or better.
Note: Set the A/V Output setting to Always On in the Signal I/O menu to control the projector when it is
not projecting any images.
1. Turn off the projector and HDBaseT transmitter.
Note: Make sure the projector and HDBaseT transmitter are turned off when connecting or
disconnecting a network cable between the two devices.
2. Connect one end of the network cable to the HDBaseT port on the transmitter.
3. Connect the other end to the projector's HDBaseT port.
Note: See the documentation that came with the HDBaseT transmitter for instructions on connecting
it to your video device or computer.
4. Turn on the projector and HDBaseT transmitter.
Note: To enable communication from the Ethernet and serial ports on the transmitter, enable Control
Communications in the HDBaseT settings of the projector's Signal I/O menu. Turning on this setting
disables the projector's LAN and RS-232C ports. If you connected an Extron XTP transmitter or switcher
to the projector's HDBaseT port, select On as the Extron XTP setting in the projector's Signal I/O menu.
Parent topic: Projector Connections
Connecting Multiple Projectors of the Same Model
You can connect up to four projectors of the same model in the same room to project a single unified
image.
47
1. Connect the computer and the projectors using HDMI cables as shown.
Note: If you are connecting three or more projectors, connect the projectors in a chain as shown.
2. After making the appropriate connections, you need to adjust the necessary projector menu settings
accordingly. Click the link below.
Multiple Projector Connection Menu Settings
Parent topic: Projector Connections
Related concepts
Using Multiple Projectors
Multiple Projector Connection Menu Settings
After connecting multiple projectors to project a unified image, see the tables below to select the correct
projector menu settings. Make sure your computer is connected to Projector 1 (the left-most projector in
your setup).
Note: You may need to restart the projector during the process. Follow any on-screen instructions.
48
Setup (2-4 Projectors)
Setting Projector 1 Projectors 2-4
Image Menu
Color Mode Multi-Projection Multi-Projection
Multi-Projection Menu
HDMI Out Setting Process Out Pass Through
Number of Projectors Specify the number of projectors connected in a series
Order Specify the position of the projectors in number order from left to right
Parent topic: Connecting Multiple Projectors of the Same Model
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector. Replace the batteries as soon
as they run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
49
1. Remove the battery cover.
2. Insert the batteries with the +and –ends facing as shown.
Warning: Make sure the batteries are inserted in the correct positions. If the batteries are not
inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product.
50
3. Replace the battery cover and press it down until it clicks into place.
Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat
or flame. Keep batteries out of the reach of children; they are choking hazards and are very
dangerous if swallowed.
Parent topic: Setting Up the Projector
51
Using the Projector on a Network
Follow the instructions in these sections to set up your projector for use on a network.
Note: Epson iProjection is not recommended for use with streaming video.
Wired Network Projection
Wireless Network Projection
Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring)
Screen Sharing
Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Controlling a Networked Projector Using a Web Browser
Using Crestron Connected
Registering a Digital Certificate on the Projector
Wired Network Projection
You can project through a wired network. To do this, you connect the projector to your network with an
Ethernet cable, and then set up your projector and computer for network projection.
After connecting and setting up the projector, install the projector software. You may need to install it
from a software CD, if included, or download the software and manuals as necessary.
Note: If your projector is connected via a LAN (Ethernet) cable to a network that includes a wireless
access point, you can connect to the projector wirelessly through the access point using the Epson
network software.
Connecting to a Wired Network
Selecting Wired Network Settings
Parent topic: Using the Projector on a Network
Related references
Additional Projector Software and Manuals
52
Connecting to a Wired Network
To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network
cable. To ensure proper data transmission, use a Category 5 shielded cable or higher.
1. Connect one end of the network cable to your network hub, switch, or router.
2. Connect the other end of the cable to the projector's LAN port.
Parent topic: Wired Network Projection
Selecting Wired Network Settings
Before you can project from computers on your network, you must select the network settings for the
projector using its menu system.
Note: Make sure you already connected the projector to your wired network using the LAN port.
1. Turn on the projector.
2. Press the Menu button.
53
3. Select the Network menu and press Enter.
4. Select Network Settings and press Enter.
54
5. Select Projector Name and enter a name up to 16 alphanumeric characters long to identify the
projector on a network.
6. Set the Priority Control Interface setting to Wired LAN.
7. Select the Wired LAN menu and press Enter.
8. Select IP Settings and press Enter.
9. Select your IP settings as necessary:
• If your network assigns addresses automatically, turn on the DHCP setting.
• If you must set addresses manually, turn off DHCP and enter the projector's IP Address,Subnet
Mask, and Gateway Address as needed.
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press Enter. Alternatively, press and hold the
Num button on the remote control while entering the desired numbers.
10. To prevent display of the IP address on the standby screen, turn off IP Address Display in the
Wired LAN menu.
11. Select Return and press Enter to return to the Network Settings menu.
12. Select Network Projection and press Enter.
You see a screen like this:
13. Turn on the Projector Keyword setting if you want to prevent access to the projector by anyone not
in the room with it.
55
14. Set the Epson iProjection setting to On.
15. Select the following options as necessary:
•Display LAN Info lets you select how the projector displays network information. You can select
an option to display a QR code that lets you quickly connect your iOS or Android devices using the
Epson iProjection app.
•Moderator Password lets you enter a password up to 4 numbers long for accessing the projector
as a moderator with the Epson iProjection (Windows/Mac) software or the Epson iProjection app.
(No default password.)
•Keyword Interrupt Display lets you select whether to display a projector keyword on the
projected image when accessing the projector using Epson iProjection.
Note: Use the displayed keyboard to enter the password and keyword. Press the arrow buttons on
the remote control to highlight characters and press Enter to select them.
16. When you finish selecting settings, select Return and press Enter to return the Network
Settings menu.
17. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
Parent topic: Wired Network Projection
Wireless Network Projection
You can project over a wireless network. To do this, you must set up your projector and computer for
wireless projection.
Note: The Epson wireless LAN module (ELPAP11) is not included with your projector and is optional. If
your projector is connected via a LAN cable to a network that includes a wireless access point, you can
connect to the projector wirelessly through the access point using the Epson network software.
After connecting and setting up the projector, install the projector software. You may need to install it
from a software CD, if included, or download the software and manuals as necessary.
Installing the Wireless LAN Module
Connecting Directly to a Smartphone or Tablet
Using Quick Wireless Connection (Windows)
Selecting Wireless Network Settings Manually
Selecting Wireless Network Settings in Windows
Selecting Wireless Network Settings on Mac
56
Setting Up Wireless Network Security
Parent topic: Using the Projector on a Network
Related references
Additional Projector Software and Manuals
Installing the Wireless LAN Module
To use the projector over a wireless network, install the optional Epson wireless LAN module (ELPAP11)
in the projector. Do not install any other type of wireless module.
Caution: Never remove the module while its indicator light is blue or flashing, or while you are projecting
wirelessly. You may damage the module or lose data.
Note: The wireless LAN module is not included with your projector.
1. Turn off the projector and unplug the power cord.
2. Loosen the screws securing the cable cover and lift off the cable cover, if it is attached.
57
3. Insert the wireless LAN module into a USB-A2 port on the projector.
4. Replace the cable cover and tighten the cable cover screws.
5. Plug in and turn on the projector.
Parent topic: Wireless Network Projection
Related references
Optional Equipment and Replacement Parts
Connecting Directly to a Smartphone or Tablet
You can display a QR code on the screen and use it to connect a single smartphone or tablet to your
projector with the Epson iProjection app.
1. Download the latest version of the Epson iProjection app from the App Store or Google Play and
install it on your smartphone or tablet.
2. Press the Menu button on the projector or the remote control.
58
3. Select the Management menu and press Enter.
4. Select On as the Wireless LAN Power setting.
5. Select the Network menu and press Enter.
6. Select Network Settings and press Enter.
7. Make sure Simple AP is set to On.
59
8. Select Network Projection and press Enter.
9. Turn on the Projector Keyword setting if you want to prevent access to the projector by anyone not
in the room with it.
Note: The projector displays a random keyword that you must enter from a computer using the
Epson iProjection (Windows/Mac) software to access the projector.
10. Select On as the Epson iProjection setting.
11. Select Return and press Enter to return to the Network Settings menu.
12. Select the following settings as necessary:
•SSID Display selects whether to display the SSID on the network standby screen and Home
screen.
•Display LAN Info lets you select how the projector displays network information. You can select
an option to display a QR code that lets you quickly connect your iOS or Android devices using the
Epson iProjection app.
•Moderator Password lets you enter a password up to 4 numbers long for accessing the projector
as a moderator with the Epson iProjection (Windows/Mac) software or the Epson iProjection app.
(No default password.)
•Keyword Interrupt Display lets you select whether to display a projector keyword on the
projected image when accessing the projector using Epson iProjection.
13. When you finish selecting settings, select Return and press Enter to return to the Network
Settings menu
60
14. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
15. Press the LAN button on the remote control.
Your projector displays a QR code on the projection surface. You can press the Enter button to
hide and show the QR code on the screen. If you do not see the QR code, set the Display LAN Info
setting to Text & QR Code in the Network menu.
16. Open the Epson iProjection app on your smartphone or tablet.
17. Use the QR code reader feature to read the QR code and connect your device to the projector.
Note: The projector and the smartphone must be on the same wireless network in order to establish
a connection.
Your smartphone or tablet is now connected to your projector. Visit epson.com/iprojection (U.S.),
epson.ca/iprojection (Canada), or latin.epson.com/iprojection (Caribbean) for information on controlling
your projector with the Epson iProjection app.
Parent topic: Wireless Network Projection
Using Quick Wireless Connection (Windows)
You can create a Quick Wireless Connection USB Key to quickly connect the projector to a Windows
computer wirelessly. Then you can project your presentation and remove the key when you are done.
Note: A USB flash drive is not included with your projector.
1. Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection
(Windows) software.
Note: See the online Epson iProjection Operation Guide for instructions.
2. Make sure the wireless LAN module is installed in your projector.
3. Turn on the projector.
4. Press the LAN button on the remote control.
The LAN standby screen is displayed.
5. Verify the SSID and IP address.
61
6. Insert the USB key into the projector's USB-A1 port.
Note: If the control pad is connected to the projector, you can connect the USB key to the USB-A
port on the control pad instead.
You see a projected message that the network information update is complete.
7. Remove the USB key.
8. Insert the USB key into a USB port on your computer.
9. Follow the on-screen instructions to install the Epson iProjection software.
Note: If you see a Windows Firewall message, click Yes to disable the firewall. You need
administrator authority to install the software. If it is not installed automatically, double-click
MPPLaunch.exe in the USB key.
After a few minutes, your computer image is displayed by the projector. If it does not appear, press
the LAN or Source Search button on your remote control or restart your computer.
10. Run your presentation as necessary.
11. When you finish projecting wirelessly, select the Safely Remove Hardware option in the Windows
taskbar, then remove the USB key from your computer.
Note: You can share the USB key with other computers without disconnecting your computer. You
may need to restart your computer to reactivate your wireless LAN connection.
Parent topic: Wireless Network Projection
Related references
Additional Projector Software and Manuals
Selecting Wireless Network Settings Manually
Before you can project from your wireless network, you must select the network settings for the projector
using its menu system.
1. Turn on the projector.
2. Press the Menu button.
62
3. Select the Management menu and press Enter.
4. Select On as the Wireless LAN Power setting.
63
5. Select the Network menu and press Enter.
6. Select Network Settings and press Enter.
7. Select Projector Name and enter a name up to 16 alphanumeric characters long to identify the
projector on the network.
8. Set the Priority Control Interface setting to Wireless LAN.
9. Select the connection method:
• To connect directly to a wireless device (Simple AP mode), set the Simple AP setting to On and
go to step 16.
• To connect to a device via a wireless network router (infrastructure mode), set the Simple AP
setting to Off and go to the next step.
64
10. Select the Wireless LAN menu and press Enter.
11. Select Search Access Point and press Enter.
The projector searches for wireless networks.
12. Select the network you want to connect to and enter the password, if necessary.
Note: If you need to assign the SSID manually, select SSID to enter the SSID.
13. Select IP Settings and press Enter.
14. Select your IP settings as necessary:
• If your network assigns addresses automatically, turn on the DHCP setting.
• If you must set addresses manually, turn off DHCP and enter the projector's IP Address,Subnet
Mask, and Gateway Address as needed.
Note: Do not use these addresses: 0.0.0.0, 127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255) for IP Address, 255.255.255.255 or 0.0.0.0
through 254.255.255.255 for Subnet Mask, and 0.0.0.0, 127.x.x.x or 224.0.0.0 through
255.255.255.255 for Gateway Address. For DNS Server addresses, do not use the following IP
65
addresses: 127.x.x.x (where x is a number from 0 to 255). When these settings are not set, DNS
server information is acquired using DHCP.
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press Enter.
15. To prevent display of the IP address on the network information screen, turn off IP Address
Display.
16. Select Return and press Enter to return to the Network Settings menu.
17. Select the Network Projection menu and press Enter.
18. Turn on the Projector Keyword setting to prevent access to the projector by anyone not in the room
with it.
Note: The projector displays a random keyword that you must enter from a computer using the
Epson iProjection (Windows/Mac) software or an iOS or Android device using the Epson iProjection
app to access the projector.
19. Set the Epson iProjection setting to On.
20. Select the following options as necessary:
•SSID Display lets you select whether to display the projector's SSID on the standby screen and
Home screen.
66
•Display LAN Info lets you select how the projector displays network information. You can select
an option to display a QR code that lets you quickly connect your iOS or Android devices with the
Epson iProjection app.
•Moderator Password lets you enter a password up to 4 numbers long for accessing the projector
as a moderator with the Epson iProjection (Windows/Mac) software or the Epson iProjection app.
•Keyword Interrupt Display lets you select whether to display a projector keyword on the
projected image when accessing the projector using Epson iProjection.
Note: Use the displayed keyboard to enter the password and keyword. Press the arrow buttons on
the remote control to highlight characters and press Enter to select them.
21. When you finish selecting settings, select Return to return to the Network Settings menu.
22. Select Set and follow the on-screen instructions to save your settings and exit the menus.
After you complete the wireless settings for your projector, you need to select the wireless network on
your computer, or iOS or Android device.
Note: You can press the LAN button on the remote control to check your network security settings after
completing the wireless settings.
Wireless LAN Menu Settings
Parent topic: Wireless Network Projection
Related references
Optional Equipment and Replacement Parts
Wireless LAN Menu Settings
Setting Options Description
Search Access Point To Search View Search for available wireless
network access points in
Advanced connection mode
SSID Up 32 alphanumeric characters Manually set the SSID (network
name) of the wireless LAN
system the projector is
connecting to
67
Setting Options Description
Security WPA2/WPA3-PSK
WPA2/WPA3-EAP
WPA3-PSK
WPA3-EAP
Open
Selects the type of security used
on the wireless network
WPA2/WPA3-PSK: uses
WPA2/WPA3 personal mode;
encryption is dependent on the
access point settings;
Passphrase must be the same
as the access point
WPA2/WPA3-EAP: uses
WPA2/WPA3 enterprise mode;
encryption is dependent on the
access point settings
WPA3-PSK: uses WPA3 security
with AES for encryption. Use the
Passphrase value to establish a
connection from a computer
WPA3-EAP: uses WPA3
enterprise mode; encryption is
dependent on the access point
settings
Passphrase Various passphrases from 8 to
32 characters (from a web
browser, the maximum is 63
characters)
Selects the pre-shared key used
on the network; passphrases are
case-sensitive. If the network
settings are reset after the
passphrase has been changed
more than once, the first
passphrase is restored. This
setting is only displayed when
Security is set to WPA3-PSK or
WPA2/WPA3-PSK.
68
Setting Options Description
EAP Method EAP Type
User name
Password
Client Certificate
Verify Server Certificate
CA certificate
RADIUS Server Name
Sets the EAP settings for WPA3-
EAP and WPA2/WPA3-EAP
security
IP Settings DHCP (On or Off)
IP Address
Subnet Mask
Gateway Address
Selects DHCP if your network
assigns IP addresses
automatically, or turns off DHCP
so you can enter the network's IP
address, subnet mask, and
gateway address as needed
DNS Server 1/DNS Server 2 Various IP addresses Sets the IP address for the DNS
server using 0 to 255 for each
address field. The DNS server
resolves the host name
IPv6 On
Off
Enables IPv6 to allow monitoring
and control of the projector over
a network using Epson Web
Control and PJLink
Auto Configuration On
Off
Selects whether to automatically
assign addresses according to
the Router Advertisement
Use Temporary Address On
Off
Enables use of a temporary IPv6
address
IP Address Display On
Off
Selects whether to display the IP
address on the network standby
screen and Home screen
Parent topic: Selecting Wireless Network Settings Manually
69
Selecting Wireless Network Settings in Windows
Before connecting to the projector, select the correct wireless network on your computer.
1. To access your wireless utility software, access the Desktop and double-click the network icon on
the Windows taskbar.
2. Do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the projector's SSID.
3. Click Connect.
Parent topic: Wireless Network Projection
Selecting Wireless Network Settings on Mac
Before connecting to the projector, select the correct wireless network on your Mac.
1. Click the AirPort icon on the menu bar at the top of the screen.
2. Make sure AirPort is turned on, then do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the projector's SSID.
Parent topic: Wireless Network Projection
Setting Up Wireless Network Security
You can set up security for your projector to use on a wireless network. Set up one of the following
security options to match the settings used on your network:
• WPA2-PSK (Simple AP mode only)
• WPA3-PSK
• WPA2/WPA3-PSK
• WPA3-EAP
• WPA2/WPA3-EAP
Note: To set up WPA3-EAP or WPA2/WPA3-EAP security, register your digital certificate file and place
it on a USB storage device for connection to your projector.
70
1. Press the Menu button.
2. Select the Network menu and press Enter.
3. Select Network Settings and press Enter.
4. Do one of the following:
• To connect directly to a wireless device (Simple AP mode), select Passphrase, press Enter,
and enter a passphrase from 8 to 63 characters long. When you are done, return to the Network
Settings screen, select Set, and follow the on-screen instructions to save your settings and exit
the menus. Skip the rest of these steps.
• To connect to a device via a wireless network router (infrastructure mode), select the Wireless
LAN menu and press Enter. Continue with the next step.
5. Select the Security setting and press Enter.
6. Select the security settings for your network.
7. Do one of the following according to the security you selected:
•WPA3-PSK or WPA2/WPA3-PSK: Select Passphrase, press Enter, and enter a passphrase
from 8 to 63 characters long. Then continue with step 9.
71
•WPA3-EAP or WPA2/WPA3-EAP: Select EAP Type and press Enter.
8. Select the protocol for authentication as the EAP Type setting.
9. When you are finished, select Return and press Enter to return to the Network Settings menu.
10. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
Parent topic: Wireless Network Projection
Related topics
Registering a Digital Certificate on the Projector
Wireless Network Projection from a Mobile Device or Windows Computer
(Screen Mirroring)
You can send images to your projector from mobile devices such as laptops, smartphones, and tablets
using Miracast technology or from a Windows computer. If your device supports Miracast, you do not
need to install any additional software.
The projector detects the input sources as Screen Mirroring1 and Screen Mirroring2.
Screen Mirroring Restrictions
Selecting Screen Mirroring Settings
Connecting for Screen Mirroring with a Windows 8.x/Windows 10 Computer
Connecting for Screen Mirroring with Miracast
Parent topic: Using the Projector on a Network
Screen Mirroring Restrictions
Note the following when using Screen Mirroring features:
• You cannot play audio with more than 3 channels.
• You may not be able to project images depending on the resolution and frame rate.
• You cannot project 3D video.
• You can only play audio saved using the LPCM or AAC-LC audio codec.
• You can only play movies saved using the H.264 or H.265 movie codec (H.265 only supports the Main
Profile)
• You cannot use extended Miracast features on Windows 8.1.
• You may not be able to view contents with copyright protection using a Miracast connection.
72
• Do not change the projector's Screen Mirroring settings during Screen Mirroring projection. Doing so
may cause the projector to disconnect and delay reconnection.
• Do not turn off the electrical supply to the projector during Screen Mirroring projection.
Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen
Mirroring)
Selecting Screen Mirroring Settings
You can select Screen Mirroring settings for your projector and then project images from your mobile
device.
1. Press the Menu button.
2. Select the Management menu and press Enter.
3. Set the Wireless LAN Power setting to On.
73
4. Select the Network menu and press Enter.
5. Select Network Settings and press Enter.
6. Select Priority Control Interface and press Enter.
7. Choose one of the following options:
• If you are casting images over a wired LAN, select Wired LAN.
• If you are casting images wirelessly directly or via a wireless network router, select Wireless LAN.
8. Set the Simple AP setting to On.
9. Select Network Projection and press Enter.
10. Set the Screen Mirroring setting to On.
11. Select these settings as necessary:
•Interrupt Connection lets you connect another mobile device while projecting using Screen
Mirroring or to exclusively connect to one device. If you want to use two Screen Mirroring sources,
turn this setting off.
74
•Adjust Image Quality lets you adjust the screen mirroring speed and quality. Select a small
number to improve the quality or a large number to increase the speed.
•Screen Mirroring Info displays connection information when projecting from a Screen Mirroring
source.
12. When you finish selecting settings, select Return and press Enter to return to the Network
Settings screen.
13. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen
Mirroring)
Connecting for Screen Mirroring with a Windows 8.x/Windows 10 Computer
You can set up your computer to wirelessly project images and play sound using Screen Mirroring.
Note: If you are using Windows 10, you can cast images over a local area network or from your device to
the projector directly. When you cast images over a local area network, the connection is more stable
and secure. Connect the projector to the network with an Ethernet cable or install the optional wireless
LAN module and set the wireless LAN settings to connect to a wireless network.
1. Select the Screen Mirroring settings on your projector as necessary.
2. Press the LAN button on the remote control to switch to the Screen Mirroring source.
You see the Screen Mirroring standby screen.
3. Do one of the following:
•Windows 10: Open Action Center and select Connect.
•Windows 8.x: Select Devices >Project >Add a wireless display.
4. Select your projector's Display Name from the list.
5. If you see the PIN entry screen on your computer, enter the PIN code displayed on the Screen
Mirroring standby screen or at the bottom right of the projected image.
The projector displays the image from your computer or mobile device.
Note: It may take some time to establish the connection. Do not disconnect the projector's power
cord while it is connecting to your device. This may cause your device to freeze or malfunction.
Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen
Mirroring)
75
Related references
Network Settings - Network Menu
Optional Equipment and Replacement Parts
Related tasks
Selecting Screen Mirroring Settings
Connecting for Screen Mirroring with Miracast
If your mobile device supports Miracast, you can connect it to the projector wirelessly and project images
and sound.
1. Select the Screen Mirroring settings on your projector as necessary.
2. Press the LAN button on the remote control to switch to the Screen Mirroring source.
You see the Screen Mirroring standby screen.
3. On your mobile device, use the Miracast function to search for the projector.
Note: See your mobile device's documentation for information on accessing the Miracast function.
You see a list of available devices.
4. Select your projector from the list.
5. If you see the PIN entry screen on your mobile device, enter the PIN code displayed on the Screen
Mirroring standby screen or at the bottom right of the projected image.
The projector displays the image from your mobile device.
Caution: It may take some time to establish the connection. Do not disconnect the projector's power
cord while it is connecting to your device. Doing so may cause your device to freeze or malfunction.
Note: Depending on the mobile device, you may need to delete a device when connecting. Follow
the on-screen instructions on your device.
Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen
Mirroring)
Related references
Network Settings - Network Menu
Related tasks
Selecting Screen Mirroring Settings
76
Screen Sharing
You can display the projected screen of other compatible Epson projectors connected to the same
network with the screen sharing function.
The screen sharing function is limited by the following:
• You cannot share your projected screen with other projectors. You can only display the projected
screen from projectors with the sharing capability.
• If your projector's firmware version is older than the version installed on other projectors on the
network, you may not be able to display the shared screen and may need to update your projector's
firmware.
• You cannot change the projector's Network settings while displaying a shared screen.
Projecting Screen Sharing Images
Parent topic: Using the Projector on a Network
Related concepts
Updating the Firmware
Projecting Screen Sharing Images
You can display shared images from other projectors that have the Screen Sharing feature. All
projectors must be connected to the same network.
Note: Make sure your projector is not connected to any devices via Epson iProjection before you use the
screen sharing function.
1. Turn on the projector.
2. Connect your projector to the same network as the host projector that is sharing its screen.
3. Press the Menu button on the projector or the remote control.
77
4. Select the Network menu and press Enter.
5. Select Network Settings and press Enter.
6. Select Network Projection and press Enter.
7. Set the Screen Sharing setting to On.
8. When you finish selecting settings, select Return and press Enter to return the Network
Settings menu.
9. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
When a projector on the same network shares its screen, the shared screen is automatically displayed
on your projector. If it isn't, press the LAN button on the remote control to switch to the screen sharing
source. To exit screen sharing, press the Esc button on the remote control.
Parent topic: Screen Sharing
Setting Up Projector Network E-Mail Alerts
You can set up the projector to send you an e-mail alert over the network if there is a problem with the
projector.
78
Note: If the Standby Mode setting is set to Communication On in the Operation menu, you can receive
e-mail alerts even if the projector is in standby mode (the power is off). The Standby Mode setting is
displayed only if the A/V Output setting in the Signal I/O menu is set to While Projecting, the Auto
Power On setting in the Network menu is set to Off, and the Power On Trigger setting in the Operation
menu is set to Plug-in Detection.
1. Press the Menu button.
2. Select the Network menu and press Enter.
3. Select Network Settings and press Enter.
4. Select the Mail Notification menu and press Enter.
5. Turn on Mail Notification.
6. Enter the IP address for the SMTP Server setting.
Note: Do not use 127.x.x.x (where x is a number from 0 to 255).
7. Select a type of Authentication for the SMTP server.
8. Select a number for the SMTP server Port Number setting, from 1 to 65535 (default is 25).
9. Enter a User Name for the SMTP server.
10. Enter a Password for the SMTP server authentication.
11. Enter the sender's email address as the From setting.
12. Choose an Address field, enter the e-mail address, and select the alerts you want to receive there.
Repeat for up to three addresses. Your e-mail address can be up to 64 alphanumeric characters
long.
13. If you are using the PJLink protocol for projector control, turn on the PJLink setting in the Projector
Control menu and enter the IP address where you want to receive PJLink notifications as the
Notified IP Address setting.
79
14. When you finish selecting settings, select Return and press Enter to return to the Network
Settings menu.
15. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.
Network Projector E-mail Alert Messages
Parent topic: Using the Projector on a Network
Related references
Input Signal Settings - Signal I/O Menu
Network Projector E-mail Alert Messages
When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you
receive an e-mail containing the following information:
• The email address entered as the From setting
•Epson Projector on the subject line
• The name of the projector experiencing a problem
• The IP address of the affected projector
• Detailed information about the problem
Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.
Parent topic: Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Network administrators can install SNMP (Simple Network Management Protocol) software on network
computers so they can monitor projectors. If your network uses this software, you can set up the
projector for SNMP monitoring.
1. Press the Menu button.
2. Select Network >Network Settings >Projector Control >SNMP >On.
80
3. Enter up to two IP addresses to receive SNMP notifications as the Trap IP Address setting, using 0
to 255 for each address field.
Note: To enter the IP address using the numeric keys on the remote control, press and hold the
Num button. Do not use these addresses: 224.0.0.0 through 255.255.255.255. This projector
supports SNMP agent version 1 (SNMPv1).
4. Enter the SNMP Community Name (up to 32 alphanumeric characters).
5. When you finish selecting settings, select Return and press Enter to return to the Network
Settings menu.
6. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
Parent topic: Using the Projector on a Network
Controlling a Networked Projector Using a Web Browser
Once you have connected your projector to your network, you can select projector settings and control
projection using a compatible web browser. You can also edit playlists when the projector is in Content
Playback mode. This lets you access the projector remotely.
Note: The web setup and control features support Microsoft Internet Explorer 11.0 or later, Microsoft
Edge, Google Chrome, and Safari on networks that do not use a proxy server for connection. You
cannot select all of the projector menu settings or control all projector functions using a web browser.
You can also control the projector using a web browser through the Epson iProjection app on iOS and
Android devices.
Note: If you set Standby Mode to Communication On in the Operation menu, you can use a web
browser to select settings and control projection even if the projector is in standby mode (the power is
off). The Standby Mode setting is displayed only if the A/V Output setting in the Signal I/O menu is set to
While Projecting, the Auto Power On setting in the Network menu is set to Off, and the Power On
Trigger setting in the Operation menu is set to Plug-in Detection.
Caution: When the projector is in Content Playback mode and the Playlists screen or the USB Memory
Device screen is displayed, do not remove the USB flash drive from the projector or disconnect the
power cord. You could damage the data on the USB flash drive.
1. Make sure the projector is turned on.
2. Start your web browser on a computer or device connected to the network.
81
3. Type the projector's IP address into the browser's address box and press the computer's Enter key
(if you are entering an IPv6 address, wrap the address with [ and ]).
Note: You can find the projector's IP address in the projector's Network menu or on the LAN input
screen.
Note: If you attempt to connect to the Web Control screen via a proxy server, the screen will not be
displayed. Make a direct connection to the Web Control screen.
Caution: Do not remove the USB flash drive from the projector or disconnect the projector's power
cord when the Playlists or USB Memory Device screens are displayed in Content Playback mode.
Data saved on the flash drive may be damaged.
You see the Web Control screen.
In normal mode:
82
In Content Playback mode:
4. To control projection remotely, select the Basic Control (in normal mode) or Remote (in Content
Playback mode) option from the Web Control screen.
Note: If you see a log in window, enter your user name and password. (If you selected the Basic
Control option, the default user name is EPSONREMOTE and the default password is guest. If you
selected the Remote option, the default user name is EPSONWEB and the default password is
admin.)
You see a screen like this:
83
1 Returns to the Epson Web Control screen
2 Power button control
3 Selects the input source
4A/V Mute button control
5Freeze button control
6 Displays closed captions
7 Displays a QR code for connecting with iOS or Android devices using the Epson iProjection
app
8Volume button controls
9 Searches for connected sources
5. Select the icon corresponding to the projector function you want to control.
84
6. To select projector menu settings, select Advanced on the Web Control screen.
Note: If you see a log in window, enter your user name and password. (The default user name is
EPSONWEB and the default password is admin.)
7. Select the name of the menu and follow the on-screen instructions.
Parent topic: Using the Projector on a Network
Related references
Feature Settings - Operation Menu
Network Settings - Network Menu
Input Signal Settings - Signal I/O Menu
Using Crestron Connected
If you are using the Crestron Connected network monitoring and control system, you can set up your
projector for use on the system. Crestron Connected lets you control and monitor your projector using a
web browser.
Note: You cannot use the Message Broadcasting feature in the Epson Projector Management software
when you use Crestron Connected.
For additional information on Crestron Connected, contact Crestron.
Setting Up Crestron Connected
Controlling a Networked Projector Using Crestron Connected
Parent topic: Using the Projector on a Network
Setting Up Crestron Connected
To set up your projector for monitoring and control using a Crestron Connected system, make sure your
computer and projector are connected to the network.
Note: If you want to use the Crestron Connected system when the projector is turned off, you need to
adjust the Standby Mode setting in the Operation menu. The Standby Mode setting is displayed only if
the A/V Output setting in the Signal I/O menu is set to While Projecting, the Auto Power On setting in
the Network menu is set to Off, and the Power On Trigger setting in the Operation menu is set to Plug-in
Detection.
1. Press the Menu button.
85
2. Select the Network menu and press Enter.
3. Select Network Settings and press Enter.
4. Select the Projector Control menu and press Enter.
5. Set the Crestron Connected setting to On to allow the projector to be detected.
Note: Enabling Crestron Connected disables the Message Broadcasting feature in the Epson
Projector Management software.
6. When you are finished selecting settings, select Return and press Enter to return to the Network
Settings menu.
7. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
8. Turn off the projector, then turn it on again to enable the setting.
Parent topic: Using Crestron Connected
Related references
Feature Settings - Operation Menu
Input Signal Settings - Signal I/O Menu
Network Settings - Network Menu
Controlling a Networked Projector Using Crestron Connected
Once you have set up your projector to use Crestron Connected, you can control and monitor projection
using a compatible web browser.
1. Start your web browser on a computer connected to the network.
2. Type the projector's IP address into the browser's address box and press the computer's Enter key.
86
You see the Epson Web Control screen:
Note: You may need to log in to access some of the options on the Web Control screen. If you see a
log in window, enter your user name and password.
3. Select Crestron Connected.
87
You see a screen like this:
Note: Sources in the image above vary depending on ports available on your product.
4. Select the input source that you want to control in the Sources List box. You can scroll through
available sources using the up and down arrows in the box.
5. To control projection remotely, click the on-screen buttons that correspond to the projector's remote
control buttons. You can scroll through button options at the bottom of the screen.
Note: These on-screen buttons do not directly correspond to the projector's remote control buttons:
•OK acts as the Enter button
•Menu displays the projector's menu
6. To view information about the projector, click the Info tab.
7. To change projector, Crestron, and password settings, click the Tools tab, select settings on the
displayed screen, and click Send.
8. When you finish selecting settings, click Exit to exit the program.
Parent topic: Using Crestron Connected
88
Registering a Digital Certificate on the Projector
Follow the instructions here if you need to install a digital certificate on the projector to provide security
for your presentation files.
Note: You can register a digital certificate over a network. However, be sure to register just once or the
certificate may not install correctly.
Importing a Web Server Certificate Using the Projector Menus
Registering Digital Certificates from a Web Browser
Digital Certificate Types
Parent topic: Using the Projector on a Network
Importing a Web Server Certificate Using the Projector Menus
You can create your web server certificate and import it using the projector menus and a USB flash
drive.
Note: You can also register digital certificates from your web browser. Make sure to only register once,
or the certificate may not install correctly.
1. Make sure your digital certificate file is compatible with projector registration and saved in the root
directory of the USB flash drive.
2. Press the Menu button on the projector or remote control.
3. Select Network >Network Settings >Projector Control >Secure HTTP >On.
4. Select the Web Server Certificate setting and press Enter.
5. Select Save or Register and press Enter.
6. Follow the on-screen instructions to connect a USB flash drive to the USB-A port on the projector or
control pad (optional accessory required).
7. Press Enter to display the certificate list.
8. Select the certificate you want to import from the displayed list.
A message is displayed prompting you to enter the password for the certificate.
9. Enter the password and press Enter.
The certificate is imported and a completion message appears.
Parent topic: Registering a Digital Certificate on the Projector
89
Registering Digital Certificates from a Web Browser
You can register the digital certificates on the projector for wireless LAN authentication.
Note: You can also register the digital certificates in the projector's Network menu. However, be sure to
register just once or the certificate may not install correctly.
1. Make sure your digital certificate file is compatible with projector registration.
2. Make sure the projector is turned on.
3. Start your web browser on a computer or mobile device connected to the network.
4. Type the projector's IP address into the browser's address box and press the computer's Enter key.
You see the Web Control screen and a prompt to enter a user ID and password.
5. Select Advanced and enter the following information in uppercase or lowercase letters, exactly as
shown:
• For the user ID, enter EPSONWEB. (You cannot change the user ID.)
• For the password, enter the default password admin. (You can change the Web Control password
using the projector's Network Settings menu.)
6. Under Network, select Certificate.
Note: You may need to select the menu icon to find Network, depending on your device.
90
You see a screen like this:
7. Click the Choose File button, select the certificate file, and click Open.
Note: The button name may vary depending on the browser you are using.
8. Enter a password in the Password box and click Send.
9. When you finish registering the certificate, click Apply to finalize your changes and complete the
registration.
Parent topic: Registering a Digital Certificate on the Projector
Digital Certificate Types
You can register these types of digital certificates.
Client Certificate (PEAP-TLS/EAP-TLS)
Specification Description
Format PKCS#12
Extension PFX, P12
Encryption RSA
91
Specification Description
Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length 512/1024/2048/4096 bit
Password Up to 64 alphanumeric characters; required
CA Certificate (PEAP/PEAP-TLS/EAP-TLS/EAP-FAST)
Specification Description
Format X509v3
Extension DER/CER/PEM
Encryption RSA
Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length 512/1024/2048/4096 bit
Encoding BASE64/Binary
Web Server Certificate (Secure HTTP)
Specification Description
Format PKCS#12
Extension PFX, P12
Encryption RSA
Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length 512/1024/2048/4096 bit
Common name Network host name
Organization Optional
Password Up to 64 alphanumeric characters; required
Parent topic: Registering a Digital Certificate on the Projector
92
Using Basic Projector Features
Follow the instructions in these sections to use your projector's basic features.
Turning On the Projector
Turning Off the Projector
Selecting the Language for the Projector Menus
Setting the Date and Time
Image Shape
Resizing the Image with the Wide and Tele Buttons
Adjusting the Image Position
Focusing the Image
Remote Control Operation
Selecting an Image Source
Projection Modes
Image Aspect Ratio
Color Mode
Adjusting the Hue, Saturation, and Brightness
Adjusting Gamma
Adjusting the Image Resolution
Adjusting the Projector's Brightness Level
Turning On Dynamic Contrast
Controlling the Volume with the Volume Buttons
Inverting the Audio Channels
Selecting a Quick Startup Setting
Projecting a PC Free Presentation
Projecting in Content Playback Mode
Turning On the Projector
Turn on the projector before you turn on the computer or video equipment you want to use.
93
1. Connect the power cord to the projector's power inlet.
2. Plug the power cord into an electrical outlet.
The projector's power light turns blue. This indicates that the projector is receiving power.
Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. If you enable
the Auto Power On setting in the projector's Operation menu, the projector turns on when it detects
a signal or cable connection from the selected port.
3. Press the power button on the projector or remote control to turn on the projector.
The projector beeps and the Status light flashes blue as the projector warms up. After about 30
seconds, the Status light stops flashing and turns blue.
Note: When Quick Startup is enabled in the projector's Operation menu, the projector becomes
ready for use in several seconds the next time you press the power button.
Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is
especially dangerous for children and pets. If you are using the remote control to turn the projector
on, make sure no one is looking into the lens or in front of the projector before turning it on.
94
Caution: Make sure no objects are blocking the light from the projector lens. Objects blocking the
lens for an extended time can melt and light that is reflected back into the lens can cause the
projector to malfunction.
If you do not see a projected image right away, try the following:
• Turn on the connected computer or video device.
• Insert a DVD or other video media and press the play button, if necessary.
• Press the Source Search button on the projector or remote control to detect the video source.
Note: If the Auto Source Search setting in the Operation menu is enabled, the projector
automatically detects the input signal when you turn it on.
• Change the screen output from the computer when using a laptop.
• Press the button for the video source on the remote control.
• If the Home screen is displayed, select the source you want to project.
Using the Home Screen
Parent topic: Using Basic Projector Features
Related references
Feature Settings - Operation Menu
Using the Home Screen
You can select input sources and other frequently used options from the Home screen.
1. To display the Home screen, do one of the following:
• Press the Home button on the control panel or remote control.
• Turn on the projector with the Home Screen Auto Disp setting enabled.
• Turn on the projector when no signal is received from the selected input source.
95
2. Press the arrow buttons on the remote control or control panel to navigate the screen, and press
Enter to select an option.
1 Selects the source you want to project
A checkmark appears in the upper right corner of the current input source. For most sources,
a preview of the input image appears as a thumbnail.
2 Projects images from two or four input sources simultaneously in a grid format (not shown in
Content Playback mode)
3 Receives shared images from other host projectors connected to the same network
4 Displays the Connection Guide
You can view steps for different wireless connection methods depending on the devices you
are using, such as smartphones or computers.
96
5 Lets you select the following common projector settings (these settings may vary depending
on other selected settings):
•Color Mode
•Brightness Level
•Volume
•Geometry Correction (H/V-Keystone and Quick Corner are available)
•Aspect
6 Moves to the previous or next page if there are more available input sources
7 Displays the projector name and the projector keyword
8 Displays the current time
Note: The Home screen closes after 10 minutes of inactivity.
3. Press the Home button to hide the Home screen.
Parent topic: Turning On the Projector
Turning Off the Projector
Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.
Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
1. Press the power button on the projector, control pad (optional accessory required), or remote
control.
The projector displays a shutdown confirmation screen.
97
2. Press the power button again. (To leave it on, press any other button.)
The projector beeps twice, the laser turns off, and the Status light turns off.
Note: If the Light Source Calibration setting is set to Run Periodically in the projector's
Management menu, light source calibration starts automatically if you turn off the projector and the
following conditions are present:
• 100 hours have passed since the last light source calibration.
• You have used the projector continuously for at least 20 minutes.
3. To transport or store the projector, make sure the power light is blue (not flashing) and the Status
light is off, then unplug the power cord.
Caution: To avoid damaging the projector or laser, never unplug the power cord when the Status
light is on or flashing.
Parent topic: Using Basic Projector Features
Related references
Administration Settings - Management Menu
98
Selecting the Language for the Projector Menus
If you want to view the projector's menus and messages in another language, you can change the
Language setting.
1. Turn on the projector.
2. Press the Menu button.
3. Select the Management menu and press Enter.
4. Select the Language setting and press Enter.
5. Select the language you want to use and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Setting the Date and Time
You can set the date and time for the projector.
1. Press the Menu button.
99
2. Select the Management menu and press Enter.
3. Select the Date & Time setting and press Enter.
4. Select the Date & Time setting and press Enter.
5. Select Date, press Enter, and use the displayed keyboard to enter today's date.
6. Select Time, press Enter, and use the displayed keyboard to enter the current time.
7. Adjust the Time Difference (UTC) settings to set the time difference from the Coordinated Universal
Time.
8. When you are finished, select Set and press Enter.
9. To activate daylight saving time, select the Daylight Saving Time setting and set it to On. Then
select settings.
10. When you are finished, select Set and press Enter.
11. To update the time automatically through an internet time server, select the Internet Time setting
and set it to On.
12. Select Internet Time Server and press Enter.
100
13. Enter the IP address for the Internet time server you want to use and select OK.
14. Select Set and press Enter.
15. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Image Shape
You can project an evenly rectangular image by placing the projector directly in front of the center of the
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off
to the side, you may need to correct the image shape for the best display quality. After correction, your
image is slightly smaller.
For the best quality images, try to adjust the projector's position to achieve the correct image size and
shape. After you have corrected the position of the projector, you can use the adjustments in this section
to correct the image shape. You cannot correct an image shape using multiple correction methods at the
same time.
Adjusting the Front Feet
Correcting Image Shape with the Keystone Buttons
Correcting Image Shape with Quick Corner
Correcting Image Shape with Arc Correction
Correcting Image Shape with Point Correction
Applying Saved Image Shape Settings
Parent topic: Using Basic Projector Features
Adjusting the Front Feet
If you are projecting from a table or other flat surface, you can adjust the image using the projector's
adjustable feet. To adjust the image height, set the projector higher or lower while keeping it level and
parallel to the screen.
1. Turn on the projector and display an image.
101
2. Rotate the front feet to adjust any tilting or vertical distortion.
If the projected image is unevenly rectangular, you need to adjust the image shape.
Parent topic: Image Shape
Correcting Image Shape with the Keystone Buttons
You can use the projector's keystone correction buttons to correct the shape of an image that is
unevenly rectangular on the sides.
Note: You can use the keystone buttons to correct the image up to ± 3° horizontally or vertically. If the
projector is mounted on the wall, use the adjustment dials on the wall mount to correct the screen image
before using any other digital correction methods.
Note: If you change the Screen Type setting or adjust the image position, your image adjustments are
reset.
102
1. Turn on the projector and display an image.
2. Press one of these keystone buttons on the control panel to display the Keystone adjustment
screen.
103
3. Press a keystone button on the projector's control panel to adjust the image shape.
Note: The horizontal keystone adjustment buttons are labeled Wand T.
After correction, your image is slightly smaller.
Note: To save the current image shape, select Save Memory. You can save up to three image
shapes in the projector's memory.
Note: If the projector is installed out of reach, you can also correct the image shape with the remote
control by pressing the Keystone button or using the H/V-Keystone settings in the projector menus.
104
Parent topic: Image Shape
Correcting Image Shape with Quick Corner
You can use the projector's Quick Corner setting to correct the shape and size of an image that is
unevenly rectangular on all sides.
Note: If you change the Screen Type setting or adjust the image position, your image adjustments are
reset.
1. Turn on the projector and display an image.
2. Press the Menu button.
105
3. Select the Installation menu and press Enter.
Note: You can also press the Keystone button on the remote control to display the Geometry
Correction screen.
4. Select the Geometry Correction setting and press Enter.
5. Select the Quick Corner setting and press Enter.
106
You see the Quick Corner adjustment screen:
6. Use the arrow buttons on the projector or remote control to select the corner of the image you want
to adjust. Then press Enter.
Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a
reset screen. Then select Yes.
107
7. Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the area
selection screen.
Note: You can also use the numeric buttons on the remote control to adjust the image shape. If one
of the directional arrows on the screen turns gray, you cannot adjust the shape any further in that
direction.
8. When you are finished, press Esc.
The Geometry Correction setting is now set to Quick Corner in the projector's Installation menu. If you
press the keystone adjustment buttons on the control panel, the area selection screen appears.
Note: To save the current image shape, select Save Memory. You can save up to three image shapes
in the projector's memory.
Parent topic: Image Shape
Correcting Image Shape with Arc Correction
You can use the projector's Arc Correction setting to adjust the curve or arc of the sides of your image.
Note: If you change the Screen Type setting or adjust the image position, your image adjustments are
reset.
1. Turn on the projector and display an image.
2. Press the Menu button.
Note: You can also open the Geometry Correction screen using the Keystone button on the remote
control. If you press the Keystone button on the remote control, skip to step 5
108
3. Select the Installation menu and press Enter.
4. Select the Geometry Correction setting and press Enter.
5. Select the Arc Correction setting and press Enter.
If you see a confirmation screen, select Yes and press Enter.
6. Select Arc Correction and press Enter.
109
You see the Arc Correction adjustment screen:
Note: To reset your adjustments, press the Esc button for at least 2 seconds to display a reset
screen, and select Yes.
7. Use the arrow buttons on the projector or the remote control to select the corner or side of the image
you want to adjust. Then press Enter.
8. Press the arrow buttons to adjust the image shape as necessary.
110
9. When you are finished, press Esc.
Note: You can fine tune the corrected results. Use Quick Corner to adjust the tilt of the image and
then use Point Correction for fine tuning. Select Quick Corner or Point Correction at the screen
in step 5.
Note: To save the current image shape, select Save Memory. You can save up to three image positions
in the projector's memory.
Parent topic: Image Shape
Correcting Image Shape with Point Correction
You can use the projector's Point Correction feature to fine-tune the image shape using points on a grid.
This is useful for adjusting overlapping areas in multiple projected images that do not line up correctly.
1. Turn on the projector and display an image.
2. Press the Menu button.
Note: You can also open the Geometry Correction screen using the Keystone button on the remote
control. If you press the Keystone button on the remote control, select Point Correction and skip to
step 4.
3. Select Installation >Geometry Correction >Point Correction.
Note: If you see a confirmation message, select Yes and press Enter.
4. Select the Point Correction setting again and press Enter.
Note: For fine tuning, select Quick Corner to roughly correct the shape and size of an image and
then select Point Correction to adjust them more precisely
111
5. Select the number of grid lines to display and press Enter.
You see a grid on the projected image.
Note: If you need to change the color of the grid lines, press Esc and then select a different Pattern
Color setting in the Point Correction menu.
6. Press the arrow buttons on the projector or remote control to move to the point on the grid that you
want to adjust. Then press Enter.
7. Press the arrow buttons as necessary to correct the image shape.
8. Press Esc to return to the previous screen and select another point to correct, if necessary.
9. When you are finished, press the Menu button.
Note: If necessary, you can fine-tune your image adjustments using the Quick Corner setting.
Parent topic: Image Shape
112
Related tasks
Correcting Image Shape with Quick Corner
Applying Saved Image Shape Settings
You can load the image shape settings you selected and saved to the projector's memory and apply
them to the current image.
1. Turn on the projector and display an image.
2. Hold down the Num button on the remote control and press the number button (1, 2, or 3) that
matches the number of the saved image shape setting.
The saved image shape setting is applied and you are prompted to calibrate the screen.
3. Follow the on-screen instructions to calibrate the screen.
Parent topic: Image Shape
Resizing the Image with the Wide and Tele Buttons
You can resize the image using the Wide and Tele buttons.
1. Turn on the projector and display an image.
2. To enlarge the image size, press the W(Wide) button on the projector's control panel.
113
3. To reduce the image size, press the T(Tele) button.
After you adjust the image size, the Image Shift screen is displayed automatically for adjusting the
image position.
Note: If the projector is installed out of reach, you can also adjust the image size with the remote
control using the Digital Zoom setting in the projector menus.
Parent topic: Using Basic Projector Features
Related references
Installation Settings - Installation Menu
Adjusting the Image Position
You can use the Image Shift feature to adjust the image position without moving the projector. Wait at
least 30 minutes after you start projecting to adjust the image position.
Note: This feature is not available if the Zoom option is set to the widest setting.
114
1. Turn on the projector and display an image.
2. Adjust the image size using the W(Wide) and T(Tele) buttons.
After you adjust the image size, the Image Shift screen is displayed automatically.
3. Use the arrow buttons on the projector or remote control to adjust the image position.
Note: You can also use the Installation menu to adjust the Image Shift setting.
4. Press Esc to close the Image Shift screen. The screen closes if no operation is performed for
approximately 10 seconds.
Note: The Image Shift setting is retained even if the projector is turned off; however, you need to
readjust the image position if you change the projector's location or angle.
Parent topic: Using Basic Projector Features
Related references
Installation Settings - Installation Menu
115
Focusing the Image
Wait at least 30 minutes after you start projecting to adjust the focus.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Installation menu and press Enter.
4. Select Test Pattern and press Enter.
Note: If Screen Type is set to 16:9, select the test pattern, then press Enter to display the
pattern you want.
116
5. Open the front cover.
6. Move the focus lever and adjust the focus using the center reference point of the projected screen.
7. Once the center reference point is in focus, check that the corner reference points are also in focus.
Note: If any areas are out of focus, use the focus lever to adjust the focus until the corners appear
the same.
8. To remove the test pattern, press Esc.
Parent topic: Using Basic Projector Features
117
Remote Control Operation
The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m)
away. You can point it at the screen or board, or the front or back of the projector.
Make sure that you aim the remote control at the projector's receivers within the angles listed here.
1 19.7 feet (6 m)
2 ± 30°
3 ± 55°
4 60°
5 15°
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Parent topic: Using Basic Projector Features
118
Selecting an Image Source
If you connected multiple image sources to the projector, such as a computer and DVD player, you may
want to switch from one image source to the other.
Note: If you turned on the Auto Source Search setting in the Operation menu, the projector
automatically switches to another detected image source if the signal to the current image source is lost.
1. Make sure the connected image source you want to use is turned on.
2. For video image sources, insert a DVD or other video media and press its play button, if necessary.
3. Do one of the following:
• Press the Source Search button on the projector or remote control until you see the image from
the source you want.
• Press the button for the source you want on the remote control. If there is more than one port for
that source, press the button again to cycle through the sources.
119
1 HDMI and Video, Video, and HDBaseT sources
2 VGA port sources
3 USB port sources (computer display or external devices)
4 Network and Screen Mirroring sources
• Press the button for the HDMI source you want on the control pad (optional accessory required).
• Press the Home button on the remote control or projector and select your image source.
120
Note: Your Home screen may look different from the illustration shown here. A checkmark
appears on the image from the current input source. You can see thumbnail previews of most
input sources (except the USB input source when in Content Playback mode).
The displayed order of the input sources changes. Detected input sources appear in the upper left
position. You can set the order of the input sources using the Sort Source Thumbnails setting in the
projector's Display menu.
Parent topic: Using Basic Projector Features
Related references
Feature Settings - Operation Menu
Related tasks
Using the Home Screen
Projection Modes
Depending on how you positioned the projector, you may need to change the projection mode so your
images project correctly.
•Front lets you project from a table in front of the screen.
•Front/Upside Down flips the image over top-to-bottom to project upside-down from a wall or ceiling
mount.
•Rear flips the image horizontally to project from behind a translucent screen.
•Rear/Upside Down flips the image over top-to-bottom and horizontally to project from the wall or
ceiling and behind a translucent screen.
You can change the projection mode using the remote control or by changing the Projection setting in
the Installation menu.
Changing the Projection Mode Using the Remote Control
Changing the Projection Mode Using the Menus
Parent topic: Using Basic Projector Features
Changing the Projection Mode Using the Remote Control
You can change the projection mode to flip the image over top-to-bottom.
1. Turn on the projector and display an image.
121
2. Hold down the A/V Mute button on the remote control for 5 to 10 seconds.
The image disappears briefly and reappears flipped top-to-bottom.
3. To change projection back to the original mode, hold down the A/V Mute button for 5 to 10 seconds
again.
Parent topic: Projection Modes
Changing the Projection Mode Using the Menus
You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the
projector menus.
1. Turn on the projector and display an image.
2. Press the Menu button.
122
3. Select the Installation menu and press Enter.
4. Select the Projection setting and press Enter.
5. Select a projection mode and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic: Projection Modes
Image Aspect Ratio
The projector can display images in different width-to-height ratios called aspect ratios. Normally the
input signal from your video source determines the image's aspect ratio. However, for certain images
you can change the aspect ratio to fit your screen by pressing a button on the remote control.
If you always want to use a particular aspect ratio for a certain video input source, you can select it using
the projector's menus.
Changing the Image Aspect Ratio
Available Image Aspect Ratios
Parent topic: Using Basic Projector Features
123
Changing the Image Aspect Ratio
You can change the aspect ratio of the displayed image to resize it.
Note: Set the Screen Type setting in the projector's Installation menu before changing the aspect ratio.
Note: This setting is available only when the Scale setting is turned off or the Scale Mode setting is set
to Full Display.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Aspect button on the remote control.
The shape and size of the displayed image changes, and the name of the aspect ratio appears
briefly on the screen.
3. To cycle through the available aspect ratios for your input signal, press the Aspect button
repeatedly.
Note: To remove black bars when projecting from a computer, set the Resolution setting to Wide or
Normal in the Image menu, depending on your computer's resolution.
Parent topic: Image Aspect Ratio
Related references
Image Quality Settings - Image Menu
Available Image Aspect Ratios
You can select the following image aspect ratios, depending on the selected Screen Type setting and
input signal from your image source.
124
Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect
ratio and resolution of your input signal. The black sections show the image area in the projection area
and the gray parts show the area where the image is not displayed according to the aspect ratio setting.
Aspect ratio setting Description
Auto Automatically sets the aspect ratio according to the input signal and
the Resolution setting.
Full Displays images using the full width of the projection area, but does
not maintain the aspect ratio.
Zoom Displays images using the full width of the projection area and
maintains the aspect ratio of the image.
Native Displays images as is (aspect ratio and resolution are maintained).
Note: The appearance of the Native image aspect ratio setting varies depending on the input signal.
If there are margins between the image edges and the screen, you can adjust the position of the
projected image using the Screen Position setting in the Installation menu.
Parent topic: Image Aspect Ratio
Color Mode
The projector offers different Color Modes to provide optimum brightness, contrast, and color for a
variety of viewing environments and image types. You can select a mode designed to match your image
and environment, or experiment with the available modes.
If you always want to use a particular color mode for a certain video input source, you can select it using
the projector menus.
Changing the Color Mode
Available Color Modes
Parent topic: Using Basic Projector Features
Changing the Color Mode
You can change the projector's Color Mode using the remote control to optimize the image for your
viewing environment.
1. Turn on the projector and switch to the image source you want to use.
125
2. If you are projecting from a DVD player or other video source, insert a disc or other video media and
press the play button, if necessary.
3. Press the Color Mode button on the remote control to change the Color Mode.
The image appearance changes and the name of the Color Mode appears briefly on the screen.
4. To cycle through all the available Color Modes for your input signal, press the Color Mode button
repeatedly.
Parent topic: Color Mode
Available Color Modes
You can set the projector to use these Color Modes, depending on the input source you are using:
Color Mode Description
Presentation Best for color presentations in a bright room
Dynamic Best for video games in a bright room
Cinema Best for movies projected in a dark room with natural tone images
sRGB Best for standard sRGB computer displays
Blackboard Best for projecting images directly on a green chalkboard
DICOM SIM Best for projecting X-rays and other medical images (shows clear
shadows)
Multi-Projection Best for projecting from multiple projectors (reduces the color tone
difference between images)
Note: The DICOM SIM color mode is for reference purposes only and should not be used to make
medical diagnoses.
126
Parent topic: Color Mode
Adjusting the Hue, Saturation, and Brightness
You can adjust the hue, saturation, and brightness settings for individual image colors.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
3. Select the Image menu and press Enter.
4. Select RGBCMY and press Enter.
127
5. Select the color to adjust and press Enter.
6. Do the following as necessary for each setting:
• To adjust the overall hue of the color (bluish, greenish, reddish), adjust the Hue setting.
• To adjust the overall vividness of the color, adjust the Saturation setting.
• To adjust the overall brightness of the color, adjust the Brightness setting.
7. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Adjusting Gamma
You can adjust the gamma to improve differences in halftone brightness that vary depending on the
connected device.
128
Note: Project a still image to adjust the gamma; you cannot adjust it properly when projecting a movie or
other moving video. Medical images may not reproduce correctly depending on your operating
environment and screen.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
3. Select the Image menu and press Enter.
4. Select the Gamma setting and press Enter.
5. Select and adjust the correction value.
You see a screen like this:
When you select a smaller value, you can reduce the overall brightness of the image to make the
image sharper. When you select a larger value, the dark areas of images become brighter, but the
color saturation for lighter areas may become weaker.
Note: If you set the Color Mode setting to DICOM SIM in the projector's Image menu, select the
adjustment value according to the projection size. If the projection size is 80 inches (203 cm) or less,
select a small value. If the projection size is 80 inches or more, select a large value.
6. If you want to make finer adjustments, select Custom and press Enter.
7. Press the left or right arrow button to select the tone you want to change, then press the up or down
arrow button to adjust the tone and press Enter.
129
You see a screen like this:
8. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Adjusting the Image Resolution
You can adjust the image resolution to project a clear image with an emphatic texture and material feel.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
130
3. Select the Image menu and press Enter.
4. Select Image Enhancement and press Enter.
5. Select Image Preset Mode and press Enter.
6. Select the preset option and press Enter.
Note: The following settings saved in the preset option are applied to the image:
•Noise Reduction
•MPEG Noise Reduction
•Deinterlacing
•Super-resolution
•Detail Enhancement
7. Adjust each setting in the projector's Image menu individually as necessary.
• Adjust the Noise Reduction setting to reduce flickering in images.
• Adjust the MPEG Noise Reduction setting to reduce the noise or artifacts seen in MPEG video.
131
• Adjust the Deinterlacing setting to convert interlaced-to-progressive signals for certain video
image types (only displayed when the current signal is interlaced [480i/576i/1080i]).
• Adjust the Super-resolution setting to reduce blurring when projecting low-resolution images.
• Adjust the Detail Enhancement setting to create a more emphatic texture and material feel of the
image.
The setting values in the preset option are overwritten as you make changes.
8. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Adjusting the Projector's Brightness Level
You can adjust the brightness of your projector's light source.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
3. Select the Operation menu and press Enter.
132
4. Select Light Source Brightness Control and press Enter.
5. If you want to maintain the brightness at a specific level, select the Maintain Brightness setting and
select On.
6. If you turn on Maintain Brightness, select the Maintain Brightness Level setting and check the
Estimated Remains information.
7. If you turn off Maintain Brightness, select the Light Source Mode setting:
•Normal: Sets brightness to the maximum level (ideal for conference rooms, auditoriums, and
lecture halls)
•Quiet: Sets brightness to 70% and reduces fan noise (ideal for libraries, theaters, museums, and
art galleries)
•Extended: Sets brightness to 70% and extends the life expectancy of the light source (ideal for
darker environments with ambient light, such as museums and art galleries, where a reduced
maintenance cycle is desired)
•Custom: Allows you to select a custom brightness level between 70 to 100%
8. If you set the Light Source Mode setting to Custom, select Brightness Level and use the left and
right arrow buttons to select the brightness.
133
9. Press Menu or Esc to exit the menus.
Note: For the best results in maintaining the brightness level, set the Light Source Calibration
setting to Run Periodically in the projector's Management menu.
Constant Brightness Usage Hours
Parent topic: Using Basic Projector Features
Related references
Administration Settings - Management Menu
Related tasks
Saving a Scheduled Event
Constant Brightness Usage Hours
If you turn on the Maintain Brightness setting, the number of hours the projector can maintain constant
brightness is displayed as the Estimated Remains setting.
134
Display level Estimated remaining hours
10000 or more hours
8000 to 9999 hours
6000 to 7999 hours
4000 to 5999 hours
2000 to 3999 hours
0 to 1999 hours
Light source life span
The estimated life span of the light source varies depending on the Brightness Level setting and
whether the Maintain Brightness setting is on or off.
Maintain Brightness off
Brightness Level setting Hours
100% 20000 hours
90% 21000 hours
80% 24000 hours
70% 30000 hours
Maintain Brightness on
1 Brightness level
2 Time the projector can maintain constant brightness (approximate)
135
Brightness Level setting Hours
85% 6000 hours
80% 10000 hours
70% 19000 hours
Note: The light source usage hours vary depending upon environmental conditions and usage. The
hours listed here are an approximate and are not guaranteed. You may need to replace internal parts
sooner than the estimated light source operation time. If Maintain Brightness is turned on, and you
have exceeded the usage hours listed here, you may not be able to select a high Maintain Brightness
Level setting.
Parent topic: Adjusting the Projector's Brightness Level
Turning On Dynamic Contrast
You can turn on the Dynamic Contrast setting to automatically optimize the image luminance. This
improves the image contrast based on the brightness of the content you project.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
136
3. Select the Image menu and press Enter.
4. Select the Dynamic Contrast setting, choose one of the following options, and press Enter:
•Normal to adjust brightness at the standard speed.
•High Speed to adjust brightness as soon as the scene changes.
5. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Controlling the Volume with the Volume Buttons
You can use the Volume buttons on the remote control to adjust the volume of your projected content.
The volume buttons control the projector’s internal speaker system or any external speakers you
connected to the projector.
You must adjust the volume separately for each connected input source.
1. Turn on the projector and start a presentation that includes audio.
137
2. To lower or raise the volume, press the Volume buttons on the remote control.
A volume gauge appears on the screen.
3. To set the volume to a specific level for an input source, use the projector menus.
Parent topic: Using Basic Projector Features
Inverting the Audio Channels
You can invert the audio's left and right channels to match the projector installation position.
1. Turn on the projector and start a presentation.
2. Press the Menu button.
138
3. Select the Signal I/O menu and press Enter.
4. Set the Inverse Audio setting to On.
5. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Selecting a Quick Startup Setting
If you want to quickly restart the projector within five seconds after turning it off, you can change the
Quick Startup setting. You can select 20, 60, or 90 minutes of Quick Startup time.
Note: The projector may take longer than five seconds to start up in the following conditions:
• When projecting from the projector's USB-B or HDMI Out port
• When projecting with Screen Mirroring
• If whiteboard sharing was terminated in the previous session
• If you want to restore the whiteboard contents from the previous session
139
Note: The Quick Startup setting is displayed only if the A/V Output setting in the Signal I/O menu is set to
While Projecting, the Auto Power On setting in the Network menu is set to Off, and the Power On
Trigger setting in the Operation menu is set to Plug-in Detection.
1. Turn on the projector.
2. Press the Menu button.
3. Select the Operation menu and press Enter.
4. Select the Quick Startup setting and press Enter.
5. Select how long you want to enable Quick Startup mode for and press Enter.
6. Press Menu or Esc to exit the menus.
Press the power button to quickly restart the projector in this mode.
Parent topic: Using Basic Projector Features
Related references
Feature Settings - Operation Menu
Input Signal Settings - Signal I/O Menu
140
Network Settings - Network Menu
Projecting a PC Free Presentation
You can use your projector's PC Free feature whenever you connect a USB device that contains
compatible files. This lets you quickly and easily display the contents of the files and control their display
using the projector's remote control.
Note: Make sure Content Playback is disabled in the projector's Operation menu.
Supported PC Free File Types
Starting a PC Free Slideshow
Starting a PC Free Movie Presentation
PC Free Display Options
Parent topic: Using Basic Projector Features
Supported PC Free File Types
You can project these types of files using the projector's PC Free feature.
Note: For best results, place your files on media that is formatted in FAT16/32. If you have trouble
projecting from media formatted for non-Windows file systems, try formatting the media for Windows
instead. You may not be able to use the security features on certain USB storage devices with PC Free
features. When connecting a USB-compatible hard drive, connect the AC adapter supplied with the
drive. PC Free may not work with USB device security features. If you are using a connected card
reader, the projector can recognize up to five cards.
File type and
extension
Details
Image (.jpg) Make sure the file is not:
• CMYK format
• Progressive format
• Highly compressed
• Above 8192 × 8192 resolution
141
File type and
extension
Details
Image (.gif ) Make sure the file is not:
• Above 1280 × 800 resolution
• Animated
• Interlaced
Image (.webp) Make sure the file resolution is not:
• Above 1920 × 1200
• Interlaced
Motion JPEG
movie (.avi)
Supports only AVI 1.0
Make sure the file is not:
• Saved with a video codec other than Motion JPEG
• Saved with an audio codec other than LPCM or IMA ADPCM
• Above 1280 × 720 resolution
• Larger than 2GB
• Saved with a frame rate higher than 30 fps
• Saved with an audio sampling rate other than 11.025 kHz, 16 kHz, 22.05 kHz, 24
kHz, 32 kHz, or 44.1 kHz
142
File type and
extension
Details
H.264, H.265
(.mp4/.mov)
Make sure the file is not:
• Larger than 2GB
• Above 1920 × 1200 resolution
• A color format other than YUV420
• Saved with a movie codec other than H.264/MPEG-4 AVC (Baseline Profile, Main
Profile, High Profile) or H.265/MPEG-H HEVC (Main Profile)
• Saved with a frame rate higher than 30 fps
• Saved with an audio codec other than MPEG-2 AAC-LC, MPEG-4 AAC-LC, or
LPCM
• Saved with an audio sampling rate other than 11.025 kHz, 16 kHz, 22.05 kHz, 24
kHz, 32 kHz, 44.1 kHz, or 48 kHz for LPCM, or 44.1 kHz or 48 kHz for MPEG-2
AAC-LC and MPEG-4 AAC-LC
• Saved with audio other than 8-bit or 16-bit and up to 2 channels
• A format other than single slice structure
Parent topic: Projecting a PC Free Presentation
Starting a PC Free Slideshow
After connecting a USB device or digital camera to the projector, you can switch to the USB input source
and start your slideshow.
Note: You can change the slideshow operation options or add special effects by highlighting Option at
the bottom of the screen and pressing Enter.
Note: Make sure Content Playback is disabled in the projector's Operation menu.
1. Press the USB button on the projector remote control until the PC Free file list appears.
143
The PC Free screen appears.
2. Do the following as necessary to locate your files:
• If you need to display files inside a subfolder on your device, press the arrow buttons to highlight
the folder and press Enter.
• To move back up a folder level on your device, highlight Back to Top and press Enter.
• To view additional files in a folder, highlight Next page or Previous page and press Enter.
• To display images from a different USB drive, select Select Drive at the top of the PC Free screen
and press Enter.
3. Do one of the following:
• To display an individual image, press the arrow buttons to highlight the image and press Enter.
(Press the Esc button to return to the file list screen.)
• To display a slide show of all the images in a folder, press the arrow buttons to highlight the
Slideshow option at the bottom of the screen and press Enter.
Note: If any file names are longer than the display area or include unsupported symbols, the file
names may be shortened or changed only in the screen display.
144
4. While projecting, use the following commands to control the display as necessary:
• To rotate a displayed image, press the up or down arrow button.
• To move to the next or previous image, press the left or right arrow button.
Note: You can use the Freeze,A/V Mute, and E-Zoom functions while projecting in PC Free mode.
5. To stop the display, follow the on-screen instructions or press the Esc button.
6. Turn off the USB device, if necessary, and then disconnect the device from the projector.
Parent topic: Projecting a PC Free Presentation
Starting a PC Free Movie Presentation
After connecting a USB device or digital camera to the projector, you can switch to the USB input source
and start your movie.
Note: You can change the operation options by highlighting Option at the bottom of the screen and
pressing Enter.
1. Press the USB button on the projector remote control until the PC Free screen appears.
145
The PC Free screen appears.
2. Do the following as necessary to locate your files:
• If you need to display files inside a subfolder on your device, press the arrow buttons to highlight
the folder and press Enter.
• To move back up a folder level on your device, highlight Back to Top and press Enter.
• To view additional files in a folder, highlight Next page or Previous page and press Enter.
• To display movie files from a different USB drive, select Select Drive at the top of the PC Free
screen and press Enter.
3. To play back a movie, press the arrow buttons to highlight the file and press Enter.
Note: If any file names are longer than the display area or include unsupported symbols, the file
names may be shortened or changed only in the screen display. If you want to play back all the
movies in a folder in sequence, select the Slideshow option at the bottom of the screen.
4. To stop movie playback, press the Esc button, highlight Exit, and press Enter.
Note: You can use the Freeze,A/V Mute, and E-Zoom functions while projecting in PC Free mode.
146
5. Turn off the USB device, if necessary, and then disconnect the device from the projector.
Parent topic: Projecting a PC Free Presentation
PC Free Display Options
You can select these display options when using the projector's PC Free feature.
Setting Options Description
Display Order Name Order Displays files in name order
Date Order Displays files in date order
Sort Order In Ascending Sorts files in first-to-last order
In Descending Sorts files in last-to-first order
Continuous Play On Displays a slideshow continuously
Off Displays a slideshow one time through
Screen Switching
Time
No Does not display the next file automatically
1 Second to 60 Seconds Displays files for the selected time and
switches to the next file automatically; high
resolution images may switch at a slightly
slower rate
147
Setting Options Description
Effect No No effect
Wipe Transitions between images with a wipe effect
Dissolve Transitions between images with a dissolve
effect
Random Transitions between images using a random
variety of effects
Parent topic: Projecting a PC Free Presentation
Projecting in Content Playback Mode
You can project images or other content from an external storage device using Content Playback mode.
You can also add color or effects to the projected image.
Switching to Content Playback Mode
Projecting a Playlist in Content Playback Mode
Creating a Playlist Using Epson Web Control
Adding Effects to the Projected Image
Parent topic: Using Basic Projector Features
Switching to Content Playback Mode
Make sure Content Playback mode is enabled before projecting images or playlists.
1. Turn on the projector.
2. Press the Menu button.
148
3. Select the Operation menu and press Enter.
4. Select Content Playback and press Enter.
5. Select On, if necessary, and press Enter.
You see a confirmation prompt.
6. Turn off the projector.
7. Turn on the projector again to enable Content Playback mode.
You can press the Home button to make sure Content Playback mode is enabled.
Note: You cannot perform the following operations in Content Playback mode:
• Color Temp. (when Warm White or Cool White is selected as Color Filter)
• Blanking
• Split Screen
• Screen Type
• Detecting the input signal automatically
149
• Remote Password
• PC Free
• Document camera
• Screen delivery function using the Epson iProjection software
Parent topic: Projecting in Content Playback Mode
Related references
Feature Settings - Operation Menu
Projecting a Playlist in Content Playback Mode
You can project playlists that contain images and movies in Content Playback mode.
1. Create a playlist and export it to a USB device using the Epson Projector Content Manager software.
Note: See the Epson Projector Content Manager Operation Guide for more information.
2. Turn on the projector.
3. Insert the USB device containing the playlist to the projector's USB-A port.
4. Press the USB button on the remote control to project the playlist.
The playlist that was played last is projected. If a timetable is assigned, the playlist will play back
according to the schedule in the timetable.
Note: You can also hold down the Num and numeric buttons to project your playlist. You can set a
remote control shortcut key using the software you used to create the playlists.
Note: To select a specific playlist, press the USB Viewer button on the remote control and use the arrow
buttons to select your playlist.
150
Parent topic: Projecting in Content Playback Mode
Related references
Additional Projector Software and Manuals
Related tasks
Connecting a USB Device or Camera to the Projector
Creating a Playlist Using Epson Web Control
You can create playlists using a web browser and save them to a USB flash drive connected to a
projector on a network when the projector is in Content Playback mode.
Caution: Do not remove the USB flash drive from the projector or disconnect the projector's power cord
while creating playlists. Data saved on the USB flash drive may be damaged.
1. Make sure the projector is in Content Playback mode.
2. Make sure your computer or device is connected to the same network as the projector.
3. Connect a USB device to the projector's USB-A port.
4. Start your web browser on your computer or device.
5. Enter the projector's IP address into the browser's address box and press the computer's Enter key.
Note: When entering an IPv6 address, wrap the address with [ and ].
You see the Epson Web Control screen.
6. Select USB Memory Device.
7. Select Upload Data.
8. Select the images or movies you want to add to the playlist.
Note: You cannot upload .mp4 or .mov files. If you want to add .mp4 or .mov files to the playlist, use
Epson Projector Content Manager software or the Epson Creative Projection app.
The selected files are copied to the USB device that is connected to the projector.
9. Do one of the following:
• Select Create New Playlist to create a new playlist and add the files to it.
• Select Add to Playlist and select the existing playlist you want to add the files to.
151
10. Edit the playlist.
11. Select Finish when you are done editing the playlist.
You can play the playlist from the Remote or Playlist screen. If you want to specify when the playlist
starts and finishes, schedule the playlist using the Epson Projector Content Manager software. See the
Epson Projector Content Manager Operation Guide for details.
Parent topic: Projecting in Content Playback Mode
Related references
Additional Projector Software and Manuals
Related tasks
Connecting a USB Device or Camera to the Projector
Controlling a Networked Projector Using a Web Browser
Related topics
Using the Projector on a Network
Adding Effects to the Projected Image
You can add color and effects to the projected image in Content Playback mode.
Note: When you use the effects feature, select Refresh Mode >Start on the Management menu
periodically. This feature is not available when using the Edge Blending feature.
1. Press the Effect button on the remote control.
2. Select the Overlay Effect setting and set it to On.
152
3. Select the Shape Filter setting and adjust the options as necessary.
•Shape: select a circle, rectangle, or other shape effect
Note: You can add your images as customized shapes using the Epson Projector Content
Manager software. See the Epson Projector Content Manager Operation Guide for details.
•Filter Effect: select an option to mask the inside or outside of the shape
•Size: set the shape size
•Position: set the shape position
Note: When you use a customized shape, you cannot change the Size and Position settings.
4. Select the Color Filter setting and adjust the options as necessary.
•Color Filter: select the color
•Custom: adjust red, green, or blue individually
5. Select the Lightness setting and adjust the brightness level.
6. Press the Menu button to exit.
Parent topic: Projecting in Content Playback Mode
Related references
Additional Projector Software and Manuals
153
Adjusting Projector Features
Follow the instructions in these sections to use your projector's feature adjustments.
Shutting Off the Picture and Sound Temporarily
Stopping Video Action Temporarily
Zooming Into and Out of Images
Using Multiple Projectors
Projecting Multiple Images Simultaneously
Projector Security Features
Creating a User Pattern to Display
Saving Settings to Memory and Using Saved Settings
Copying Menu Settings Between Projectors
Scheduling Projector Events
Shutting Off the Picture and Sound Temporarily
You can temporarily turn off the projected picture and sound if you want to redirect your audience's
attention during a presentation. Any sound or video action continues to run, however, so you cannot
resume projection at the point that you stopped it.
If you want to display an image such as a company logo or picture when the presentation is stopped, you
can set up this feature using the projector's menus.
1. Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound.
2. To turn the picture and sound back on, press A/V Mute again.
Note: The projector's power automatically turns off thirty minutes after A/V Mute is enabled. You can
disable this feature in the projector's Operation menu.
154
Parent topic: Adjusting Projector Features
Related tasks
Saving a User's Logo Image to Display
Stopping Video Action Temporarily
You can temporarily stop the action in a video or computer presentation and keep the current image on
the screen. Any sound or video action continues to run, however, so you cannot resume projection at the
point that you stopped it.
1. Press the Freeze button on the remote control to stop the video action.
2. To restart the video action in progress, press Freeze again.
Parent topic: Adjusting Projector Features
Zooming Into and Out of Images
You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it
on the screen.
Note: This feature is unavailable if the Scale setting in the Image menu is enabled.
155
1. Press the E-Zoom + button on the remote control.
You see a crosshair on the screen indicating the center of the zoom area.
2. Use the following buttons on the remote control to adjust the zoomed image:
• Use the arrow buttons to position the crosshair in the image area you want to zoom into.
• Press the E-Zoom + button repeatedly to zoom into the image area, enlarging it as necessary.
Press and hold the E-Zoom + button to zoom in more quickly.
• To pan around the zoomed image area, use the arrow buttons.
• To zoom out of the image, press the E-Zoom – button as necessary.
• To return to the original image size, press the Esc button.
Parent topic: Adjusting Projector Features
Using Multiple Projectors
You can combine the projected images from two or more projectors to create one large image. Follow
the instructions in these sections to set up and project from multiple projectors.
Projector Identification System for Multiple Projector Control
Adjusting Color Uniformity
Blending the Image Edges
Matching the Image Colors
Adjusting the Black Level
Adjusting RGBCMY
Scaling an Image
Parent topic: Adjusting Projector Features
156
Projector Identification System for Multiple Projector Control
You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.
Setting the Projector ID
Setting the Remote Control ID
Parent topic: Using Multiple Projectors
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press the Menu button.
2. Select the Multi-Projection menu and press Enter.
3. Select Projector ID and press Enter.
4. Press the arrow buttons on the remote control to select the identification number you want to use for
the projector. Then press Enter.
Repeat these steps for all the other projectors you want to operate from one remote control.
157
Note: If you don't know the projector's ID, aim the remote control at the projector and press the ID button
to temporarily display the projector's ID on the screen.
Parent topic: Projector Identification System for Multiple Projector Control
Setting the Remote Control ID
The remote control's ID is set to zero by default so it can operate any compatible projector. If you want to
set the remote control to operate only a particular projector, you need to set the remote control's ID to
match the projector's ID.
1. Turn on the projector you want the remote control to operate with exclusively.
2. Make sure you know the projector's ID number as set in the Multi-Projection menu Projector ID
setting.
Note: If you have forgotten the projector's ID, aim the remote control at the projector and press the
ID button to temporarily display the projector's ID on the screen. If you turn off the Projector ID
setting, the remote control will operate the projector regardless of the ID selected on the remote.
3. Aim the remote control at that projector.
4. Hold down the ID button on the remote control while you press the numeric button that matches the
projector's ID. Then release the buttons.
The remote control's ID is set.
Note: If the batteries are left out of the remote control for an extended period, the remote control ID
returns to its default setting.
Parent topic: Projector Identification System for Multiple Projector Control
158
Adjusting Color Uniformity
If the color tone is uneven on each screen, adjust the color tone balance in the Management menu of
each projector. (The color tone may not be uniform even after performing color uniformity.)
Note: Set the Color Mode setting in each projector's Image menu to Multi-Projection before you start
projecting.
1. Press the Menu button on the remote or control panel, select the Management menu, and press
Enter.
2. Select the Color Uniformity setting and press Enter.
3. Select On as the Color Uniformity setting and press Enter, then press Esc.
4. Select Adjustment Level and press Enter.
5. Select an adjustment level and press Esc.
6. Select Start Adjustments and press Enter.
159
7. Select the area you want to adjust and press Enter.
8. Select Red,Green, or Blue and press the left arrow button to weaken the color tone or the right
arrow button to strengthen the color tone.
Note: The adjustment screen changes each time you press Enter.
9. Press Esc to return to the area selection screen.
10. Repeat steps 7 through 9 for each area, then select All to adjust the entire screen.
11. Press Esc to exit the menus.
Parent topic: Using Multiple Projectors
Related references
Image Quality Settings - Image Menu
160
Blending the Image Edges
You can use the projector's Edge Blending feature to create a seamless image from multiple projectors.
1. Press the Menu button.
2. Select the Multi-Projection menu and press Enter.
3. Select the Edge Blending setting and press Enter.
4. Turn on the Edge Blending,Line Guide, and Pattern Guide settings.
5. Select the edge you want to blend on each projector and press Enter. For the projector on the
left, select the Right Edge and for the projector on the right, select Left Edge.
161
You see a screen like this:
6. Select the Blending setting and select On.
7. Press Esc to return to the previous screen.
8. Select the Blend Start Position setting and adjust the point where edge blending begins.
Note: If you created a unified image area using the Edge Blending feature, set the Blend Start
Position setting to 0.
9. Select the Blend Range setting and use the arrow buttons to select the width of the blended area so
that the displayed guides are at the edges of the overlapping area between the two images.
Note: If you created a unified image area using the Edge Blending feature, set the Blend Range
setting to 600. Depending on your installation environment, you can also set the Blend Range
setting to 600 or less but black bands may appear on the side of the projected screen.
10. Press Esc to go back to the previous screen.
11. Select the Blend Curve setting and select a gradient for the shaded area on the projectors.
162
12. When the edges are blended, turn off the Line Guide and Pattern Guide settings on each projector
to check the final settings.
13. When you are finished, press the Menu button.
If the blended area does not overlap exactly, correct the shape of the blended area using Point
Correction.
Parent topic: Using Multiple Projectors
Matching the Image Colors
You can match the display color of multiple projectors that will project next to one another. Turn on all the
projectors so you can properly adjust the color of the combined screen.
1. Press the Menu button.
2. Select the Multi-Projection menu and press Enter.
3. Select the Color Matching setting and press Enter.
163
You see this screen:
4. Press the left or right arrow button to select Adjustment Level 8.
Note: There are several adjustment levels and you can adjust each level individually.
5. Press the left or right arrow buttons to adjust the Brightness setting.
6. Press the left or right arrow buttons to adjust the color tone for the Red,Green, and Blue settings if
necessary.
7. Press Esc to return to the Multi-Projection menu.
8. Select the Operation menu and press Enter.
9. Select Light Source Brightness Control and press Enter.
10. Set the Light Source Mode setting to Custom and adjust the Brightness Level setting as
necessary.
11. Press Esc and repeat steps 2-6 for Adjustment Level 7 through 2.
12. When you are finished, press the Menu button.
Parent topic: Using Multiple Projectors
164
Adjusting the Black Level
When two images overlap, the overlapping area can appear differently from the areas that do not
overlap. You can use the projector's Black Level setting to make the difference less noticeable.
Note: You cannot adjust the black levels while projecting a test pattern, and you may not be able to
adjust the black levels correctly if the Geometry Correction settings are set too high. The brightness
and tone of the overlapping areas may differ from the rest of the image even after adjusting the black
level.
1. Press the Menu button.
165
2. Select the Multi-Projection menu and press Enter.
3. Select the Black Level setting and press Enter.
Note: The Black Level setting is displayed only if Edge Blending is enabled and at least one (top,
bottom, left, right) edge is set to On.
4. Select the Color Adjustment setting and press Enter.
You see a screen based on the Top Edge,Bottom Edge,Right Edge, and Left Edge settings you
selected for the Edge Blending setting.
5. Select the area you want to adjust and press Enter.
Note: The area you selected is displayed in orange. Adjust overlapping areas starting with the
brightest areas first. For example, adjust area 2 to match area 1, then adjust area 3 to match area 2.
166
6. Adjust the brightness and tone of the areas that do not overlap to match the areas that overlap using
the displayed adjustment sliders. Then press the Esc button.
7. Repeat the previous two steps as needed until all areas match.
8. If the tone of some areas do not match, you can adjust them using the Area Correction setting.
Continue with the next step. Otherwise, press the Menu button to exit.
9. Press the Esc button to return to the Black Level screen.
10. Select the Area Correction setting and press Enter.
11. Select the Start Adjustments setting and press Enter.
You see a screen with boundary lines indicating areas that are overlapping. The boundary lines are
based on the Top Edge,Bottom Edge,Right Edge, and Left Edge settings you selected for the
Edge Blending setting.
12. Use the arrow buttons to select a boundary line of the area you want to adjust and press Enter.
The selected line is displayed in orange.
13. Use the arrow buttons to adjust the boundary line position and press the Enter button.
167
14. Use the arrow buttons to select an adjustment point and press the Enter button.
Note: You can change the number of adjustment points displayed by changing the Points setting in
the Area Correction menu.
The selected point turns orange.
15. Use the arrow buttons to move the point.
16. To move another point, press the Esc button and repeat the previous two steps.
17. To move another boundary line, press the Esc button repeatedly until you can select a boundary
line.
18. When you are finished, press the Esc button until you see a confirmation message. Select Yes and
press Enter.
19. When you are finished, press the Menu button.
Note: Changing the Top Edge,Bottom Edge,Right Edge, or Left Edge settings resets the Black
Level setting to its default value.
Parent topic: Using Multiple Projectors
Adjusting RGBCMY
You can adjust the Hue,Saturation, and Brightness settings for R (red), G (green), B (blue), C (cyan),
M (magenta), and Y (yellow) color components.
Turn on all the projectors and select the RGBCMY setting in each projector's Image menu so that the
color tone on the combined screen becomes entirely even.
1. Press the Menu button.
168
2. Select the Image menu and press Enter.
3. Select the RGBCMY setting and press Enter.
4. Select the color you want to adjust and press Enter.
169
You see this screen:
• To adjust the overall hue of the color, adjust the Hue setting.
• To adjust the overall vividness of the color, adjust the Saturation setting.
• To adjust the overall brightness of the color, adjust the Brightness setting.
5. Press the left or right arrow buttons to adjust the Hue,Saturation, and Brightness settings.
6. Repeat the previous two steps as necessary to adjust each color.
7. Press Menu or Esc to exit the menus.
Parent topic: Using Multiple Projectors
Scaling an Image
You can project the same image from multiple projectors and use the Scale feature to crop and combine
them into one large image.
170
1. Press the Menu button.
2. Select the Multi-Projection menu and press Enter.
3. Select the Scale setting and press Enter.
You see this screen:
4. Select one of the following as the Scale setting:
•Auto to automatically adjust the clipped areas according to the HDMI Out Setting and Edge
Blending settings you selected
•Manual to adjust the clipped areas manually
5. Select the Scale Mode setting and select one of these options:
•Zoom Display to maintain the image aspect ratio as you scale the image
171
•Full Display to adjust the image to the projector's screen size as you scale the image
6. If you selected Auto as the Scale setting, you can skip the remaining steps. If you selected Manual,
adjust each of the following options as necessary:
• Select –or +to scale the image horizontally and vertically at the same time
• Select Scale Vertically to scale the image vertically only
• Select Scale Horizontally to scale the image horizontally only
7. Select the Clip Adjustment setting and use the arrow buttons to adjust the coordinates and size of
each image as you view the screen.
8. Select the Clip Range setting to preview the area you just selected.
9. Press the Menu button to exit.
Parent topic: Using Multiple Projectors
Projecting Multiple Images Simultaneously
You can use the split screen feature to simultaneously project from two or four images from different
image sources next to each other. You can control the split screen feature using the remote control or
the projector menus.
172
Note: While you use the split screen feature, other projector features may not be available and some
settings may be automatically applied to all images.
Note: You cannot use split screen with certain input source combinations. You cannot perform split
screen projection when the Connect ELPCB02 setting is set to On in the Installation menu, or if the
Content Playback setting is On in the Operation menu.
Note: You may not be able to perform split screen projection when you use the Scale or Edge Blending
features.
1. Press the Split button on the remote control.
Note: You can also select Split Screen from the Home screen.
You are prompted for the number of screens.
2. Select 2 Screens or 4 Screens, depending on the number of input sources you want to project.
173
If you selected 2 Screens, the currently selected input source moves to the left side of the screen. If
you selected 4 Screens and used the split screen feature to project four images before, the
projected images are arranged in the same order as they were previously.
3. Press the Menu button.
You see a screen like this:
4. Press the arrow and Enter buttons to select an image source for each section of the screen.
5. To choose the audio you want to hear, select an input source as the Audio Source setting.
6. If you selected 2 Screens and want to change the size of the images, select a sizing option as the
Screen Size setting.
7. Select Execute and press Enter.
8. To exit the split screen feature, press the Split or Esc button.
Input Sources for Split Screen Projection
Split Screen Projection Restrictions
174
Parent topic: Adjusting Projector Features
Input Sources for Split Screen Projection
You can choose most input source combinations for split screen projection, but the following
combinations are not supported:
•HDMI2,HDMI3,HDBaseT
•Computer1,Computer2,Video
•USB1,USB2,USB Display,LAN (when Content Playback is Off)
•USB,USB Display,LAN (when Content Playback is On)
Note: When you split the screen into quarters and select the USB1 or USB input source, you can select
only Screen Mirroring1 or Screen Mirroring2 for the other input sources.
Parent topic: Projecting Multiple Images Simultaneously
Split Screen Projection Restrictions
You cannot perform the following operations during split screen projection:
• Change settings in the projector's menu
• E-Zoom
• Switching the aspect mode (the aspect mode is set to Auto)
• Operations using the User button on the remote control, other than displaying the network information
on the projected surface
• Applying the Dynamic Contrast setting
• Displaying the network information on the projected surface by a method other than pressing the User
button
• Displaying the Screen Mirroring information bar
Image restrictions
• Even if you set No-signal screen to Logo in the Display menu, the blue screen appears when no
image signal is being input
• When you create a single, unified image projected from multiple projectors and use the split screen
feature, the second projector detects no image signal
Parent topic: Projecting Multiple Images Simultaneously
175
Projector Security Features
You can secure your projector to deter theft or prevent unintended use by setting up the following
security features:
• Password security to prevent the projector from being turned on, and prevent changes to the startup
screen and other settings.
• Button lock security to block operation of the projector using the buttons on the control panel.
• Security cabling to physically cable the projector in place.
Password Security Types
Locking the Projector's Buttons
Installing a Security Cable
Parent topic: Adjusting Projector Features
Password Security Types
You can set up these types of password security using one shared password:
•Power On Protection password prevents anyone from using the projector without first entering a
password.
•User's Logo password prevents anyone from changing the custom screen the projector can display
when it turns on. The presence of the custom screen discourages theft by identifying the projector’s
owner.
•Network password prevents anyone from changing the network settings in the projector menus.
•Schedule password prevents anyone from changing the projector's time or schedule settings.
Setting a Password
Selecting Password Security Types
Entering a Password to Use the Projector
Saving a User's Logo Image to Display
Parent topic: Projector Security Features
Setting a Password
To use password security, you must set a password.
Note: The default password is set to 0000.
176
1. Hold down the Freeze button on the remote control for about 5 seconds or until you see this menu.
2. Press the down arrow to select Password and press Enter.
You see the prompt "Change the password?".
3. Select Yes and press Enter.
4. Press and hold down the Num button on the remote control and use the numeric buttons to set a
four-digit password.
The password displays as **** as you enter it. Then you see the confirmation prompt.
5. Enter the password again.
You see the message "Password accepted."
6. Press Esc to return to the menu.
7. Make a note of the password and keep it in a safe place in case you forget it.
Parent topic: Password Security Types
177
Selecting Password Security Types
After setting a password, you see this menu, allowing you to select the password security types you want
to use.
If you do not see this menu, hold down the Freeze button on the remote control for about five seconds or
until the menu appears.
• To prevent unauthorized use of the projector, select Power On Protection, press Enter, select On,
press Enter again, and press Esc.
• To prevent changes to certain projector settings, select Menu Protection, press Enter, and do the
following as necessary:
• To prevent changes to the User's Logo screen or related display settings, select User's Logo, press
Enter, select On, press Enter again, and press Esc.
• To prevent changes to the projector's time or schedule settings, select Schedule, press Enter,
select On, press Enter again, and press Esc.
• To prevent changes to network settings, select Network, press Enter, select On, press Enter
again, and press Esc.
You can attach the Password Protect sticker to the projector as an additional theft deterrent.
Note: Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the
password required to use the projector.
Parent topic: Password Security Types
178
Entering a Password to Use the Projector
If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.
1. Press and hold down the Num button on the remote control while you enter the password using the
numeric buttons.
Note: The default password is 0000.
The password screen closes.
2. If the password is incorrect, the following may happen:
• You see a "wrong password" message and a prompt to try again. Enter the correct password to
proceed.
• If you have forgotten the password, make note of the Request Code: xxxxx number that appears
on the screen and contact Epson Support.
179
• If you enter an incorrect password three times in succession, you see a message telling you that
the projector is locked. After the message is displayed for 5 minutes, the projector enters standby
mode. Unplug the projector, plug in the power cord, and turn on the projector. You see a prompt to
enter the password.
• If you continue to enter an incorrect password many times in succession, the projector displays a
request code and a message to contact Epson Support. Do not attempt to enter the password
again. When you contact Epson Support, provide the displayed request code and proof of
ownership for assistance in unlocking the projector.
Parent topic: Password Security Types
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Saving a User's Logo Image to Display
You can transfer an image to the projector and then display it whenever the projector turns on. You can
also display the image when the projector is not receiving an input signal or when you temporarily stop
projection. This transferred image is called the User's Logo screen.
The image you select as the User's Logo can be a photo, graphic, or company logo, which is useful in
identifying the projector's owner to help deter theft. You can prevent changes to the User's Logo by
setting up password protection for it.
Note: You cannot save an image that is protected by HDCP as a User's Logo. You cannot display a
user's logo when Content Playback is set to On.
Note: When you copy the menu settings from one projector to another using the batch setup feature, the
user logo is also copied. Do not include any information in the user logo that you do not want to share
between multiple projectors.
1. Display the image you want to project as the User's Logo.
180
2. Press the Menu button, select the Management menu, and press Enter.
3. Select the User's Logo setting and press Enter.
4. Select Start Setting and press Enter.
You see a prompt asking if you want to use the displayed image as a user's logo.
Note: When you select User's Logo, adjustments such as Geometry Correction,E-Zoom,
Aspect,Scale, and Screen Type are temporarily canceled.
5. Select Yes and press Enter.
Note: Depending on the image signal, the screen size may change to match the resolution of the
image signal.
6. Make sure the image appears as you want it, then select Yes again and press Enter.
You see a completion message.
7. Press Esc to exit the message screen.
181
8. Select the Display menu and press Enter.
9. Select when you want to display the User's Logo screen:
• To display it whenever there is no input signal, select No-Signal Screen and set it to Logo.
• To display it whenever you turn the projector on, select Startup Screen and set it to On.
To prevent anyone from changing the User's Logo settings without first entering a password, set a
password and enable User's Logo security.
Parent topic: Password Security Types
Related tasks
Selecting Password Security Types
Setting a Password
Locking the Projector's Buttons
You can lock the buttons on the projector's control panel to prevent anyone from using the projector. You
can lock all the buttons or all the buttons except the power button.
1. Press the Menu button.
2. Select the Management menu and press Enter.
182
3. Select the Control Panel Lock setting and press Enter.
4. Select one of these lock types and press Enter:
• To lock all of the projector's buttons, select Full Lock.
• To lock all buttons except the power button, select Except for Power.
You see a confirmation prompt.
5. Select Yes and press Enter.
Unlocking the Projector's Buttons
Parent topic: Projector Security Features
Unlocking the Projector's Buttons
If the projector's buttons have been locked, hold the Enter button on the projector's control panel for 7
seconds to unlock them. You can also use the remote control to set the Control Panel Lock setting to
Off in the Management menu.
Parent topic: Locking the Projector's Buttons
Related references
Administration Settings - Management Menu
Installing a Security Cable
You can install two types of security cables on the projector to deter theft.
• Use the security slot on the projector to attach a Kensington lock. See your local computer or
electronics dealer for purchase information.
• Use the security cable attachment point on the projector to attach a wire cable and secure it to a room
fixture or heavy furniture.
183
Parent topic: Projector Security Features
Creating a User Pattern to Display
You can transfer an image to the projector and then display it as a pattern to aid in presentations when
you use the Pattern Display feature. This transferred image is called the User Pattern.
Note: Once you save a user pattern, you cannot restore the default pattern. You cannot save an image
that is protected by HDCP.
1. Display the image you want to project as the User Pattern from a connected computer or video
source.
2. Press the Menu button, select the Management menu, and press Enter.
3. Select the User Pattern setting and press Enter.
You see a prompt asking if you want to use the displayed image as a User Pattern.
Note: When you select User Pattern, adjustments such as Keystone,E-Zoom,Aspect,Adjust
Zoom, or Image Shift are temporarily canceled.
184
4. Select Yes and press Enter.
Note: It takes a few moments for the projector to save the image; do not use the projector, its remote
control, or any connected equipment until it is finished.
You see a completion message.
5. Press Esc to exit the message screen.
To view your user pattern, press the Menu button, select the Display menu, and press Enter. Set the
Pattern Type setting to User Pattern, then return to the Display menu and select Pattern Display.
Parent topic: Adjusting Projector Features
Saving Settings to Memory and Using Saved Settings
You can save customized settings for each of your video inputs and then select the saved settings
whenever you want to use them.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Memory menu and press Enter.
185
You see this screen:
4. Select one of the following options:
•Load Memory: Overwrites your current settings with saved settings
•Save Memory: Saves your current settings to memory (10 memories with different names are
available)
Note: A memory name that has already been used is indicated by a blue mark. Saving over a
previously saved memory overwrites the settings with your current settings.
Note: You can save the following settings:
• Image menu settings for each color mode
•Video Range and Overscan in the Signal I/O menu
•Light Source Mode and Brightness Level in the Operation menu
•Color Matching in the Multi-Projection menu
•Erase Memory: Erases the selected memory settings
186
•Rename Memory: Renames a saved memory
•Reset Memory Settings: Delete all saved memory
5. Press Esc to exit.
Parent topic: Adjusting Projector Features
Copying Menu Settings Between Projectors
After you select menu settings for your projector, you can transfer them to another projector of the same
model.
Note: Copy the projector's settings before you adjust the projected image using the projector's Geometry
Correction settings. Any saved User's Logo setting on the projector will transfer to the other projector.
Caution: If the copy process fails due to a power failure, communication error, or for any other reason,
Epson will not be responsible for any repair costs incurred.
The following settings will not transfer between projectors:
• Light Source Hours
• Status
The following settings will not transfer between projectors if you set the Batch Setup Range setting to
Limited:
• Password Protection settings
•EDID in the Signal I/O menu
• Network menu settings
Note: In addition to the methods covered in this section, you can also copy and transfer settings to
multiple projectors over a network using the Epson Projector Management software. See the online
Epson Projector Management Operation Guide for instructions. You can download the latest software
and documentation from the Epson website.
Saving Settings to a USB Flash Drive
Transferring Settings from a USB Flash Drive
Saving Settings to a Computer
Transferring Settings from a Computer
Parent topic: Adjusting Projector Features
187
Saving Settings to a USB Flash Drive
You can save the projector settings you want to transfer to a USB flash drive.
Note: Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly.
The flash drive must use the FAT format and cannot have any security features.
1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Insert the flash drive into the USB-A1 or USB-A2 port.
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be
saved correctly.
3. Press and hold the Esc button on the control panel or remote control as you connect the power cord
to the projector's power inlet.
4. When the power and Status lights are blue, and the Laser and Temp lights are orange, release the
Esc button.
The lights flash to indicate that settings are transferring to the flash drive. When the lights stop
flashing, the power light turns blue and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the flash drive.
Note: If the projector does not enter standby mode and the lights continue flashing, see the link
below for a solution.
188
Parent topic: Copying Menu Settings Between Projectors
Related references
Projector Light Status
Transferring Settings from a USB Flash Drive
After saving projector settings to a USB flash drive, you can transfer them to another projector of the
same model.
Note: Make sure the USB flash drive contains only a single settings transfer from another projector of
the same model. The settings are contained in a file called pjconfdata.bin. If the drive contains other
files, the transfer may not complete correctly.
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.
1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Insert the flash drive into one of the USB-A ports.
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be
saved correctly.
3. Press and hold the Menu button on the control panel or remote control as you connect the power
cord to the projector's power inlet.
4. When the power and Status lights are blue, and the Laser and Temp lights are orange, release the
Menu button.
The lights flash to indicate that settings are transferring to the projector. When the lights stop
flashing, the power light turns blue and the projector enters standby mode.
189
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the flash drive.
Note: If the projector does not enter standby mode and the lights continue flashing, see the link
below for a solution.
Parent topic: Copying Menu Settings Between Projectors
Related references
Projector Light Status
Saving Settings to a Computer
You can save the projector settings you want to transfer to a computer.
Your computer must be running one of the following operating systems:
• Windows 7
• Windows 8.x
• Windows 10
• OS X 10.11.x
• macOS 10.12.x
• macOS 10.13.x
• macOS 10.14.x
• macOS 10.15.x
1. Turn off the projector and unplug the power cord from the projector's power inlet.
190
2. Connect a USB cable to your projector's USB-B port.
3. Connect the other end to any available USB port on your computer.
4. Press and hold the Esc button on the control panel or remote control as you connect the power cord
to the projector's power inlet.
5. When the power and Status lights are blue, and the Laser and Temp lights are orange, release the
Esc button.
The projector shows up as a removable disk on your computer.
6. Open the removable disk and copy the pjconfdata.bin file to your computer.
7. Once the file has copied, do one of the following:
•Windows: Open the My Computer,Computer,Windows Explorer, or File Explorer utility.
Right-click the name of your projector (listed as a removable disk) and select Eject.
•Mac: Drag the removable disk icon for your projector from the desktop into the trash.
The projector turns off when you disconnect the USB cable.
Note: If the projector does not turn off and the lights continue flashing, see the link below for a
solution.
Parent topic: Copying Menu Settings Between Projectors
Related references
Projector Light Status
191
Transferring Settings from a Computer
After saving projector settings to a computer, you can transfer them to another projector of the same
model.
Your computer must be running one of the following operating systems:
• Windows 7
• Windows 8.x
• Windows 10
• OS X 10.11.x
• macOS 10.12.x
• macOS 10.13.x
• macOS 10.14.x
• macOS 10.15.x
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.
1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Connect a USB cable to your projector's USB-B port.
3. Connect the other end to any available USB port on your computer.
4. Press and hold the Menu button on the control panel or remote control as you connect the power
cord to the projector's power inlet.
5. When the power and Status lights are blue, and the Laser and Temp lights are orange, release the
Menu button.
192
The projector shows up as a removable disk on your computer.
6. Copy the pjconfdata.bin file from your computer to the removable disk.
Note: Do not copy any other files to the removable disk.
7. Once the file has copied, do one of the following:
•Windows: Open the My Computer,Computer,Windows Explorer, or File Explorer utility.
Right-click the name of your projector (listed as a removable disk) and select Eject.
•Mac: Drag the removable disk icon for your projector from the desktop into the trash.
Various projector lights start flashing to indicate that the projector's settings are being updated.
When the lights stop flashing, remove the USB cable from the projector. The projector enters
standby mode.
Caution: Do not unplug the power cord while the lights are flashing. This could damage the
projector.
Note: If the projector does not turn off and the lights continue flashing, see the link below for a
solution.
Parent topic: Copying Menu Settings Between Projectors
Related references
Projector Light Status
Scheduling Projector Events
You can save a projector command, such as turning the projector on or off or switching input sources, as
an "event." You can schedule when you want the projector to automatically execute the command.
Caution: Do not place flammable objects in front of the lens. If you schedule the projector to turn on
automatically, flammable objects in front of the lens could catch on fire.
Note: The Schedule setting in the Menu Protection menu must be turned off to schedule an event.
Saving a Scheduled Event
Viewing Scheduled Events
Editing a Scheduled Event
193
Parent topic: Adjusting Projector Features
Related tasks
Selecting Password Security Types
Setting a Password
Saving a Scheduled Event
You can select projector commands you want to perform and schedule them as an event.
Note: Light Source Calibration events do not start if the projector is not used continuously for at least 20
minutes, or if the projector is regularly turned off by shutting off the power outlet. Set Light Source
Calibration events to occur only after 100 hours of usage.
Note: The Schedule setting in the Menu Protection menu must be turned off to schedule an event.
1. Set the date and time in the Management menu.
2. Press the Menu button.
3. Select the Management menu and press Enter.
4. Select the Schedule Settings setting and press Enter.
5. Select the Schedule menu and press Enter.
6. Select Add New and press Enter.
194
You see a screen like this:
195
7. In the Event Settings section, select the events you want to have occur. (Select No Change for
events that you do not want to occur.)
8. In the Date/Time Settings section, set the date and time for the scheduled events to occur.
9. When you are finished, select Save and press Enter.
10. To schedule more events, repeat the previous steps as necessary.
11. Select Setup complete and press Enter to save your changes.
Parent topic: Scheduling Projector Events
Viewing Scheduled Events
You can view your scheduled events on the calendar displayed on the Schedule Settings screen.
1. Press the Menu button.
2. Select the Management menu and press Enter.
3. Select Schedule Settings and press Enter.
4. Select Schedule and press Enter.
196
You see a screen like this:
Colored boxes on the calendar indicate the following:
One-time event
Repeating event
Communication is on or off
Event is invalid
5. To view an event, press the left and right arrow buttons on the remote to select a day.
The screen displays the details of the events scheduled for that day. A blue icon indicates an
enabled event, a gray icon indicates a disabled event, and the icon indicates a repeating event.
Parent topic: Scheduling Projector Events
Editing a Scheduled Event
You can edit any currently scheduled event.
1. Press the Menu button.
197
2. Select the Management menu and press Enter.
3. Select the Schedule Settings setting and press Enter.
You see a screen like this:
4. Press the left or right arrow buttons to highlight the date on the calendar containing the scheduled
event you want to edit.
5. Press the up or down arrow buttons to highlight the event you want to edit, and press Enter.
6. Select one of the following:
•Enabled/Disabled to enable or disable the selected event.
•Edit to edit the settings for the selected event.
•Clear to delete the selected event.
•Add New to add a new scheduled event.
7. When you are finished, select Return and press Enter.
8. Select Setup complete and press Enter to save your changes.
Note: To delete all scheduled events, select Schedule Reset and select Yes.
199
Adjusting the Menu Settings
Follow the instructions in these sections to access the projector menu system and change projector
settings.
Using the Projector's Menus
Image Quality Settings - Image Menu
Input Signal Settings - Signal I/O Menu
Installation Settings - Installation Menu
Display Settings - Display Menu
Feature Settings - Operation Menu
Administration Settings - Management Menu
Network Settings - Network Menu
Multiple Projector Operation Settings - Multi-Projection Menu
Image Quality Memory Settings - Memory Menu
Setup Settings - ECO Menu
Initial Settings and Reset Options - Initial/All Settings Menu
Using the Projector's Menus
You can use the projector's menus to adjust the settings that control how your projector works. The
projector displays the menus on the screen.
1. Press the Menu button on the control panel or remote control.
200
You see the menu screen.
2. Press the up or down arrow button to move through the menus listed on the left. The settings for
each menu are displayed on the right.
Note: The available settings depend on the current input source, resolution, or other menu settings.
3. To change settings in the displayed menu, press Enter.
4. Press the up or down arrow button to move through the settings.
5. Change the settings using the buttons listed on the bottom of the menu screens.
6. To return all the menu settings to their default values, select the Initial/All Settings menu.
7. When you finish changing settings on a menu, press Esc.
8. Press Menu or Esc to exit the menus.
Note: The icon indicates that a setting contains sub-settings.
Parent topic: Adjusting the Menu Settings
201
Image Quality Settings - Image Menu
Settings on the Image menu let you adjust the quality of your image for the input source you are currently
using. The available settings depend on the currently selected color mode and input source.
Color Mode Settings
Setting Options Description
Color Mode See the list of available Color
Modes
Adjusts the vividness of image
colors for various image types
and environments
Brightness Varying levels available Lightens or darkens the overall
image
Contrast Varying levels available Adjusts the difference between
light and dark areas of the image
Color Saturation Varying levels available Adjusts the intensity of the image
colors
202
Setting Options Description
Tint Varying levels available Adjusts the balance of green to
magenta tones in the image
Sharpness Varying levels available Adjusts the sharpness or
softness of image details
White Balance Color Temp.
G-M Correction
Custom
Sets the overall color tone of the
image
Color Temp.: sets the color
temperature according to the
selected color mode; lower
values tint the image red, and
higher values tint the image blue
(setting not displayed when
Color Filter is set to Warm
White or Cool White)
G-M Correction: makes fine
adjustments to the color tone;
higher values tint the image
green and lower values tint the
image red
Custom: adjusts the individual
RGB components of the offset
and gain
Dynamic Contrast Off
Normal
High Speed
Adjusts the projected luminance
based on the image brightness
203
Setting Options Description
Image Enhancement Image Preset Mode
Noise Reduction
MPEG Noise Reduction
Deinterlacing
Super-resolution
Detail Enhancement
Image Preset Mode: selects one
of five preset groups of settings
for the next image enhancement
options
Noise Reduction: reduces
flickering in analog images
MPEG Noise Reduction:
reduces the noise or static in
MPEG video
Deinterlacing: sets whether to
convert interlaced-to-progressive
signals for certain video image
types
Super-resolution: sharpens
blurred images when projecting
low-resolution images
Detail Enhancement: enhances
details to create clear outlines
Gamma –2 to 2
Custom
Adjusts the colors by selecting
one of the gamma correction
values or referring to a gamma
graph
RGBCMY Varying levels available Adjusts the hue, saturation, and
brightness for each color
Reset to Defaults — Resets all settings for the Color
Mode currently selected
Note: The Brightness setting does not affect laser brightness. To change the laser brightness mode,
use the Light Source Brightness Control setting in the Operation menu.
Input Source Settings
To change settings for an input source, make sure the source is connected and select that source.
204
Note: You can restore the default settings of the Tracking,Sync, and Position settings by pressing the
Auto button on the remote control.
Setting Options Description
Source — Displays the current input source
selected
Resolution Auto
Normal
Wide
Sets the input signal resolution if
not detected automatically using
the Auto option
Aspect See the list of available aspect
ratios
Sets the aspect ratio (width-to-
height ratio)
Turn off the Scale setting or set
the Scale Mode setting to Full
Display before selecting this
setting .
Scale Varying levels available When using multiple projectors,
adjusts the scale of the image
displayed by each projector
Analog Signal Adjustment Auto Setup
Tracking
Sync.
Position
Adjusts the signal when
Computer is the currently
selected input source
Auto Setup: set to On to
automatically optimize the image
quality
Tracking: adjusts the signal to
eliminate vertical stripes in
images
Sync: adjusts signal to eliminate
fuzziness or flickering in images
Position: adjusts the image
location on the screen
Reset to Defaults — Resets all settings for the
currently selected input source
205
Note: Select Reset Image Settings to reset all settings on the Image menu to their default values.
Parent topic: Adjusting the Menu Settings
Related concepts
Image Aspect Ratio
Related references
Feature Settings - Operation Menu
Related tasks
Changing the Color Mode
Turning On Dynamic Contrast
Input Signal Settings - Signal I/O Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal I/O menu. The available settings depend on the currently
selected input source.
To change settings for an input source, make sure the source is connected and select that source.
206
Setting Options Description
Volume Varying levels available Adjusts the volume of the projector's
speaker system or external speakers
Source Signal Format
Overscan
EDID
HDMI Out Intensity
Displays settings selected for the current
input source
Signal Format: sets the signal type and
video range for certain input sources
•Video Signal: specifies the signal type
from input sources connected to video
ports; if interference appears or no
image appears when set to Auto,
select the appropriate signal type
•Video Range: sets the video range to
match the setting of an input source
connected to the HDMI ports or
HDBaseT port
Overscan: changes the projected image
ratio to make the edges visible by a
selectable percentage or automatically
when projecting a component signal
EDID: describes the display capabilities
of your projector; change this setting as
necessary according to the resolution of
the current input source (you can select
EDID settings for individual input sources
without having to change the input
source)
HDMI Out Intensity: adjusts the signal
intensity input from the HDMI Out port;
change this setting when you cannot
display the image output from the HDMI
Out port correctly
207
Setting Options Description
A/V Output While Projecting
Always On
Determines when the projector outputs
audio and images to external devices; set
to Always On to output audio and
images when the projector is in standby
mode
Inverse Audio On
Off
Set to On to invert the audio's left and
right channels to match the projector's
installation position
Audio Output Auto
Audio
Audio1
Audio2
Sets the audio input port when projecting
from input sources other than HDMI,
HDBaseT, LAN, and Screen Mirroring
HDMI Audio Output HDMI1
HDMI2
HDMI3
Sets the audio input port when projecting
from one of the HDMI ports
Monitor Out Port Monitor Out
Computer2
Selects the function of the
Computer2/Monitor Out port
Monitor Out: select this option when
outputting an image signal to an external
monitor
Computer2: select this option when
inputting an image signal from a
computer
208
Setting Options Description
HDMI Link Device Connections
HDMI Link
Audio Out Device
Power On Link
Power Off Link
Adjusts the HDMI Link options that allow
the projector or remote to control HDMI-
connected devices that support the CEC
standard
Device Connections: lists the devices
connected to the HDMI1,HDMI2, and
HDMI3 ports
HDMI Link: enables or disables the
HDMI Link feature
Audio Out Device: selects whether to
output audio from the internal speakers
or a connected audio/visual system
Power On Link: controls what happens
when you turn on the projector or a linked
device
•Bidirectional: automatically turns on
the connected device when you turn on
the projector, and vice versa
•Device -> PJ: automatically turns on
the projector when you turn on the
connected device
•PJ -> Device: automatically turns on
the connected device when you turn on
the projector
Power Off Link: controls whether linked
devices are turned off when the projector
is turned off
209
Setting Options Description
HDBaseT Connect ELPHD02
Control Communications
Extron XTP
Connect ELPHD02: set to On to use the
optional HDBaseT control pad. Make
sure this setting is disabled if you are not
using an HDBaseT control pad.
Control Communications: enables or
disables communication from the
Ethernet and serial ports on the
transmitter; turning on this setting
disables the projector's LAN and RS-
232C ports (Connect ELPHD02 and
Extron XTP must be turned off to use
this setting)
Extron XTP: set to On when you connect
an Extron XTP transmitter or switcher to
the HDBaseT port
HDMI EQ Setting 1
2
3
Adjusts the HDMI input signal level
depending on the devices connected to
the HDMI port. If there is a lot of
interference in the image, or if a problem
occurs, such as no image being
projected, change the setting.
Reset Signal I/O Settings Resets all settings on the Signal I/O
menu to their default values
Parent topic: Adjusting the Menu Settings
Installation Settings - Installation Menu
Settings on the Installation menu let you set up your projector for your installation environment. The
available settings depend on the currently selected input source and other settings.
210
Note: Reset to Defaults is not displayed when projecting in Content Playback mode. Selecting Reset
Installation Settings does not reset Digital Zoom or Image Shift settings.
Setting Options Description
Fixed Installation On
Off
Set to On if you installed the
projector in a fixed location
Test Pattern — Displays a test pattern to assist in
focusing and zooming the image
and correcting image shape
Setting Plate Installation Guide — Displays an on-screen guide to
assist with installing the
projection screen when you have
installed the projector on a wall
Vertical Installation Yes
No
Set to Yes if you installed the
projector in a vertical position
211
Setting Options Description
Projection Front
Rear
Front/Upside Down
Rear/Upside Down
Selects the way the projector
faces the screen so the image is
oriented correctly
212
Setting Options Description
Geometry Correction H/V-Keystone
Quick Corner
Arc Correction
Point Correction
Memory
Adjusts image shape to
rectangular (horizontally and
vertically)
H/V Keystone: lets you manually
correct horizontal and vertical
sides
Quick Corner: select to correct
image shape and alignment
using an on-screen display
Arc Correction: select to adjust
the curve or arc of the horizontal
and vertical sides
Point Correction: select to
divide the projected image into a
grid and correct distortion by
moving a selected point
Memory: controls memory
functions for current image shape
settings
•Save Memory: saves the
current image shape as a
memory setting
•Load Memory: loads a saved
image shape memory
•Rename Memory: renames a
saved image shape memory
•Erase Memory: deletes a
saved image shape memory
•Reset Memory: resets all the
image shape memory settings
Digital Zoom Varying levels available Adjusts the size of the projected
image
213
Setting Options Description
Image Shift Varying positions available Adjusts the position of the
projected image
Connect ELPCB02 On
Off
Set to On to switch the input
source between the HDMI2 port
and HDMI3 port each time you
press the HDMI2 button on the
optional interface box
Remote Receiver Front/Rear
Front
Rear
Off
Limits reception of remote control
signals by the selected receiver;
Off turns off all receivers
Screen Type 4:3
16:6
16:9
16:10
21:9
Sets the aspect ratio to fit the
image on the projection surface
(setting only displayed when
Content Playback is Off)
Screen Position Varying positions available Shifts the image position on the
screen
High Altitude Mode On
Off
Regulates the projector's
operating temperature at
altitudes above 4921 feet (1500
m)
Source — Displays settings saved for each
input source
Blanking Top
Bottom
Left
Right
Hides an area of the projected
image that you select (setting
only displayed when Content
Playback is Off)
214
Setting Options Description
Reset to Defaults — Resets all settings for the current
input source (setting only
displayed when Content
Playback is Off)
Reset Installation Settings — Resets all settings on the
Installation menu to their default
values except for the following:
•Digital Zoom
•Image Shift
Parent topic: Adjusting the Menu Settings
Related tasks
Unlocking the Projector's Buttons
Correcting Image Shape with Arc Correction
Correcting Image Shape with the Keystone Buttons
Correcting Image Shape with Quick Corner
Adjusting the Image Position
Locking the Projector's Buttons
Related topics
Setting Up the Projector
215
Display Settings - Display Menu
Settings on the Display menu let you customize various projector display features. The available settings
depend on the currently selected input source and other settings.
Setting Options Description
Pattern Display — Displays the selected pattern
type to assist in adjusting the
image
Pattern Type Pattern 1
Pattern 2
Pattern 3
Pattern 4
User Pattern
Selects the type of grid pattern,
line pattern, or custom pattern to
display
216
Setting Options Description
No-signal Screen Black
Blue
Logo
Gradation
Select the screen color or logo to
display when no input signal is
detected (setting not displayed in
Content Playback mode)
Startup Screen On
Off
Controls whether a logo is
displayed when the projector
starts up
Home Screen Auto Disp. On
Off
Controls whether the Home
screen is displayed automatically
when no input signal is detected
when the projector turns on
Sort Source Thumbnails On
Off
Selects whether or not to sort
sources on the Home screen by
signal detection
Messages On
Off
Controls whether projector status
and error messages are
displayed on the projected image
Menu Rotation Right 90 Degree
Left 90 Degree
Off
Rotates the menu display 90°
Menu Color Black
White
Sets the color theme of the Home
screen and projector menus
217
Setting Options Description
Split Screen Setting Display Audio Output Source
Align
Adjusts the Split Screen feature
(setting not displayed in Content
Playback mode)
Display Audio Output Source:
controls whether an icon is
displayed with the source
providing audio output during
Split Screen projection
Align: if splitting the screen
between two images, determines
whether the images are aligned
at the top or in the middle of the
screen
Reset Display Settings — Resets all settings on the Display
menu to their default values
Note: You must disable User's Logo password protection to adjust the No-signal Screen and Startup
Screen settings.
Parent topic: Adjusting the Menu Settings
Related tasks
Creating a User Pattern to Display
218
Feature Settings - Operation Menu
Settings on the Operation menu let you customize various projector features that control its operation.
The available settings depend on the currently selected input source and other settings.
Setting Options Description
Auto Source Search On
Off
Enables the projector to
automatically select an input
source (setting not displayed in
Content Playback mode)
219
Setting Options Description
Light Source Brightness
Control
Maintain Brightness
Maintain Brightness Level
Estimated Remains
Light Source Mode
Brightness Level
Controls the constant brightness
of the projector's light source
Maintain Brightness: maintains
a constant brightness
Maintain Brightness Level:
selects the brightness level to
maintain when the Maintain
Brightness setting is enabled
Estimated Remains: if the
Maintain Brightness setting is
enabled, displays the remaining
number of hours the projector
can maintain constant brightness
Light Source Mode: selects the
brightness mode of the projector
when the Maintain Brightness
setting is disabled
•Normal: maximum brightness
•Quiet: 70% brightness with
reduced fan noise
•Extended: 70% brightness
and extends the life
expectancy of the light source
•Custom: select a custom
brightness level and enable
use of the next setting
Brightness Level: select the
Custom brightness level you
want
Direct Power On On
Off
Controls whether the projector
automatically turns on when you
plug it in
220
Setting Options Description
Auto Power On HDMI1
Computer1
Off
Selects whether to automatically
turn on the projector when you
connect an input signal to a
specific input source
If you select HDMI1, set the
method for automatically turning
on the projector in the Power On
Trigger setting.
Power On Trigger Plug-in Detection
Signal Detection
Sets the way the projector turns
on when Auto Power On is set to
HDMI1.
Plug-in Detection: automatically
turns the projector on when it
detects a connected device is
turned on
Signal Detection: automatically
turns the projector on when an
HDMI signal is detected
Note: When Signal Detection is
selected, the power used in
standby mode increases.
Sleep Mode On
Off
Automatically turns off the
projector after an interval of
inactivity
Sleep Mode Timer 1 to 30 minutes Sets the time before the projector
automatically turns off (Sleep
Mode must be turned on)
A/V Mute Timer On
Off
Automatically turns off the
projector after 30 minutes of
inactivity
221
Setting Options Description
Standby Mode Communication On
Communication Off
Enable this setting to allow
monitoring and control of the
projector over a network when
the projector is in standby mode
(setting is displayed only when
A/V Output is set to While
Projecting)
Port Wired LAN
Wireless LAN
Selects the port to use while the
Standby Mode setting is set to
Communication On
Startup Source Varying options Select the input source you want
to project when the projector is
turned on in Content Playback
mode
Quick Startup 20min.
60min.
90min.
Off
Sets the time period for which
you want to be able to restart the
projector within five seconds of
turning it off (Quick Start mode).
Make sure to first set A/V Output
to While Projecting, Auto Power
On to Off, and Power On Trigger
to Plug-in Detection. It may take
longer than five seconds when
projecting from the projector's
USB or HDMI Out ports or when
using the Screen Mirroring
features.
Closed Caption CC1
CC2
Off
Enables and selects the type of
closed captions to display
Indicators On
Off
Enables or disables the status
indicator lights on the projector
222
Setting Options Description
Inv Direction Button On
Off
Enable this setting if you want to
invert the direction of the arrow
buttons on the control panel to
match the projector's installation
position
Content Playback On
Off
Enables Content Playback mode,
allowing you to project custom
playlists and add color and shape
effects to projected images
Overlay Effect Overlay Effect
Shape Filter
Color Filter
Lightness
Adds color and shape effects to
the projected image (setting not
displayed when using Edge
Blending feature)
USB Viewer — Selects and plays back a playlist
saved on the USB flash drive
Reset Operation Settings — Reset all settings on the
Operation menu to their default
values
Parent topic: Adjusting the Menu Settings
Related tasks
Turning On the Projector
Turning Off the Projector
Selecting a Quick Startup Setting
223
Administration Settings - Management Menu
Settings on the Management menu let you customize various projector administrative features.
Note: You must disable Schedule password protection to adjust the Schedule Settings settings.
Selecting Reset Management Settings does not reset the Schedule Settings or Language settings.
Setting Options Description
User Button Various options available Assigns a menu option to the
User button on the remote
control for one-touch access
User's Logo Start Setting
Reset
Creates the screen that the
projector displays to identify itself
and enhance security
224
Setting Options Description
User Pattern — Captures a projected screen and
saves it as a pattern for display;
select Pattern Display in the
Display menu to display the
saved pattern
Control Panel Lock Full Lock
Except for Power
Off
Controls projector button locking
to secure the projector
Full Lock: locks all buttons
Except for Power: locks all
buttons except the power button
Off: no buttons locked
Color Uniformity Color Uniformity
Adjustment Level
Start Adjustments
Reset
Adjusts the color tone balance
Color Uniformity: set to On to
adjust the color tone balance for
the whole screen
Adjustment Level: sets the
adjustment level
Start Adjustments: adjusts the
red, green, and blue color tones
individually for the selected area
Reset: resets all Color Uniformity
adjustment values to their
defaults
Refresh Mode Timer
Messages
Start
Select Start to clear an
afterimage that remains in the
projected image and turn off the
projector after the time specified
in the Timer screen. Press any
button to cancel Refresh Mode.
Enable the Messages setting if
you want to display a message
when Refresh Mode is in
progress.
225
Setting Options Description
Light Source Calibration Run Now
Run Periodically
Last Run
Selects options to perform light
source calibration to maintain the
color balance of the projected
image
Run Now: Select On to start light
source calibration now. Make
sure the projector has been
turned on for at least 30 minutes
for maximum accuracy. You may
not be able to start calibration if
the projector's environmental
temperature is out of range.
Run Periodically: Select On to
perform calibration every 100
hours of usage
Last Run: Displays the date and
time light source calibration was
last performed
Date & Time Date & Time
Daylight Saving Time
Internet Time
Adjusts the projector's date and
time settings
•Date & Time: sets the date
and time on the projector
•Daylight Saving Time:
enables daylight saving time
•Internet Time: updates the
time automatically via an
online time server
Schedule Settings — Schedules projector events to
occur automatically at selected
dates and times
Wireless LAN Power On
Off
Enables or disables wireless
communication
226
Setting Options Description
Wireless LAN Diagnosis Output
Ping
IP Address
Ping until stopped
Start
Displays the status of the
wireless LAN communication
Log Save Destination Internal Memory
USB and Internal Memory
Selects where you want to save
projector error and operation log
files (setting not displayed in
Content Playback mode)
Batch Setup Range All
Limited
Selects which projector menu
settings to copy using the batch
setup feature; select All to copy
all the settings, or select Limited
to copy all settings except for the
following:
•Password Protection settings
•EDID setting in the Signal I/O
menu
•Network menu settings
Language Various languages available Selects the language for
projector menu and message
displays
Information Various items available Displays information about the
projector and current input signal;
the displayed items vary
depending on the current input
source
The Version option displays
version numbers for the projector
and other components
Display Logs Temp Warning Info
Power On/Off History
Displays log data saved to the
location specified in the Log
Save Destination setting
227
Setting Options Description
Reset Management Settings — Resets all settings on the
Management menu to their
default values except for the
following:
•Schedule Settings
•Language
Event ID Code List
Parent topic: Adjusting the Menu Settings
Related tasks
Setting the Date and Time
Selecting the Language for the Projector Menus
Saving a Scheduled Event
Viewing Scheduled Events
Editing a Scheduled Event
Event ID Code List
If the Event ID option on the Information screen in the Management menu displays a code number,
check this list of Event ID codes for the solution to the projector problem associated with the code.
Event ID code Cause and solution
0026 A screen mirroring communication error has occurred. Turn the projector off and on
again, or restart the network software.
0032
0036
0037
228
Event ID code Cause and solution
0027 Unstable screen mirroring communication. Check the network communication
status, wait a few moments, and try connecting to the network again.
0028
0029
0030
0031
0035
0023 Connection failed. If you see the PIN entry screen on your computer, enter the PIN
code displayed on the network information screen or at the bottom right of the
projected image. If this does not solve the problem, restart the projector and the
connected devices, and then check the connection settings.
0024
0025
0043 The video format is not supported. Change the resolution of the mobile device and
reconnect. Alternatively, change the Adjust Image Quality setting for the projector
and reconnect.
0432 The network software did not start. Turn the projector off and then on again.
0435
0433 Cannot display the transferred images. Restart the network software.
0434 Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
0481
0482
0485
0483 The network software quit unexpectedly. Check the network communication status,
then turn the projector off and then on again.
04FE
0484 Communication with computer was disconnected. Restart the network software.
0479 A projector system error has occurred. Turn the projector off and then on again.
04FF
0891 Cannot find the SSID (network name). Make sure your computer and projector are
connected to your access point's current SSID.
229
Event ID code Cause and solution
0892 The WPA/WPA2/WPA3 authentication type does not match. Make sure the wireless
network security settings are correct.
0893 The WEP/TKIP/AES encryption type does not match. Make sure the wireless
network security settings are correct.
0894 Communication with unauthorized access point was disconnected. Contact your
network administrator.
0895 Communication with a connected device was disconnected. Check your device's
connection status.
0898 Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
If you are not using DHCP, turn off the DHCP setting in the Network menus.
0899 A communication error has occurred. Try restarting the network software and
restarting your projector. If that does not solve the problem, contact Epson for help.
089A The EAP authentication type does not match the network. Check the wireless LAN
security settings and make sure that the security certificate is installed correctly.
089B EAP server authentication failed. Check the wireless LAN security settings and
make sure that the security certificate is installed correctly.
089C EAP client authentication failed. Check the wireless LAN security settings and make
sure that the security certificate is installed correctly.
089D Key exchange failed. Check the wireless LAN security settings and make sure that
the security certificate is installed correctly.
0920 The internal battery that saves the projector's date and time settings is running low.
Contact Epson for help.
0B01 The internal storage could not be detected correctly. Turn off the projector and
disconnect the power cord, then reconnect the power cord and turn the projector
back on. When the projector is turned on, the security certificate and address book
are deleted. If that does not solve the problem, contact Epson for help.
0BFF An error has occurred in the whiteboard function. Restart the projector.
Parent topic: Administration Settings - Management Menu
Related references
Network Settings - Network Menu
231
Setting Options Description
Wireless LAN Info. Projector Name
Wireless LAN
Displays wireless network status and
details when the wireless LAN module
is installed or when the Simple AP
setting is disabled
The Wireless LAN option displays the
following:
•Antenna level
•SSID
•Channel
•DHCP
•IP Address
•Subnet Mask
•Gateway Address
•DNS Server 1
•DNS Server 2
•MAC Address
•Region Code
Wired LAN Info. Projector Name
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Displays wired network status and
details
232
Setting Options Description
Wired LAN Info. IPv6 IPv6 Address (Manual)
IPv6 Address (Auto)
Displays IPv6 information.
The IPv6 Address (Manual) option
displays the following:
•IPv6 Address
•Prefix Length
•Gateway Address
The IPv6 Address (Auto) option
displays the following:
•Temporary Address
•Link-local Address
•Stateless Address
•Stateful Address
Network Settings — Configures your network settings
Reset Network Settings — Resets all settings on the Network
menu to their default values
Parent topic: Adjusting the Menu Settings
Related concepts
Wired Network Projection
Wireless Network Projection
Related references
Wireless LAN Menu Settings
233
Multiple Projector Operation Settings - Multi-Projection Menu
Settings on the Multi-Projection menu let you set up multiple projectors to project a single unified image.
Setting Options Description
Projector ID Off
1 through 9
Assigns an ID for the projector
when you use multiple projectors
HDMI Out Setting Pass Through
Off
Set to Pass Through to enable
up to four projectors connected
via HDMI cables to project a
unified image.
Number of Projectors 2 to 4 Sets the number of projectors
used to create a unified image;
this setting is displayed only if
HDMI Out Setting is set to Pass
Through
234
Setting Options Description
Order 1 to 4 (when HDMI Out Setting
is set to Pass Through)
Sets the projector's position in
numbered order from left to right
Geometry Correction H/V-Keystone
Quick Corner
Arc Correction
Point Correction
Memory
Adjusts image shape to
rectangular (horizontally and
vertically)
H/V Keystone: lets you manually
correct horizontal and vertical
sides
Quick Corner: select to correct
image shape and alignment
using an on-screen display
Arc Correction: select to adjust
the curve or arc of the horizontal
and vertical sides
Point Correction: select to
divide the projected image into a
grid and correct distortion by
moving a selected point
Memory: controls memory
functions for current image shape
settings
•Save Memory: saves the
current image shape as a
memory setting
•Load Memory: loads a saved
image shape memory
•Rename Memory: renames a
saved image shape memory
•Erase Memory: deletes a
saved image shape memory
•Reset Memory: resets all the
image shape memory settings
235
Setting Options Description
Edge Blending Edge Blending
Top Edge
Bottom Edge
Left Edge
Right Edge
Line Guide
Pattern Guide
Guide Color
Blends the border between
multiple images to create a
seamless screen
Black Level Color Adjustment
Area Correction
Reset
Adjusts the brightness and tone
differences in overlapping
images
Scale Varying levels available When using multiple projectors,
adjusts the scale of the image
displayed by each projector
Color Uniformity Color Uniformity
Adjustment Level
Start Adjustments
Reset
Adjusts the color tone balance
Color Uniformity: set to On to
adjust the color tone balance for
the whole screen
Adjustment Level: sets the
adjustment level
Start Adjustments: adjusts the
red, green, and blue color tones
individually for the selected area
Reset: resets all Color Uniformity
adjustment values to their
defaults
236
Setting Options Description
Light Source Mode Normal
Quiet
Extended
Custom
Selects the brightness mode of
the projector when the Maintain
Brightness setting is disabled
Normal: maximum brightness
Quiet: 70% brightness with
reduced fan noise
Extended: 70% brightness and
extends the life expectancy of the
light source
Custom: select a custom
brightness level and enable use
of the next setting
Color Matching Adjustment Level
Red
Green
Blue
Brightness
Corrects the tint and brightness
differences between images
RGBCMY Varying levels available Adjusts the hue, saturation, and
brightness for each color
Reset Multi-Projection Settings — Resets all settings on the Multi-
Projection menu to their default
values
Parent topic: Adjusting the Menu Settings
Related concepts
Using Multiple Projectors
Related references
Multiple Projector Connection Menu Settings
Related tasks
Blending the Image Edges
Adjusting Color Uniformity
237
Matching the Image Colors
Adjusting the Black Level
Adjusting RGBCMY
Scaling an Image
Image Quality Memory Settings - Memory Menu
Settings on the Memory menu let you save and load image quality settings in the projector's memory.
Setting Options Description
Save Memory Memory 1 to 10 Lets you save the current image
quality settings to memory
Load Memory Memory 1 to 10 Loads a saved image quality
setting memory
Rename Memory Memory 1 to 10 Renames a saved image quality
setting memory
238
Setting Options Description
Erase Memory Memory 1 to 10 Deletes a saved image quality
setting memory
Reset Memory — Resets all the image quality
setting memory settings
Parent topic: Adjusting the Menu Settings
Related tasks
Saving Settings to Memory and Using Saved Settings
Setup Settings - ECO Menu
Settings on the ECO menu let you customize projector functions to save power.
239
Setting Options Description
Light Source Mode Normal
Quiet
Extended
Custom
Selects the brightness mode of
the projector when the Maintain
Brightness setting is disabled
Normal: maximum brightness
Quiet: 70% brightness with
reduced fan noise
Extended: 70% brightness and
extends the life expectancy of the
light source
Custom: select a custom
brightness level and enable use
of the next setting
Sleep Mode On
Off
Automatically turns off the
projector after an interval of
inactivity
Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode
A/V Mute Timer On
Off
Automatically turns off the
projector after 30 minutes if A/V
Mute is enabled
Standby Mode Communication On
Communication Off
Enable this setting to allow the
following operations to occur
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)
Parent topic: Adjusting the Menu Settings
Related references
Projector Light Source Specifications
240
Initial Settings and Reset Options - Initial/All Settings Menu
You can reset most of the projector settings to their default values using the Reset All option on the
Initial/All Settings menu.
When you select the Reset All option, you see this screen:
Checkmarks appear next to the menu settings that are selected to be reset. If you do not want to reset
settings in some menus, deselect them. When you are ready, select Execute and press Enter.
242
Maintaining and Transporting the Projector
Follow the instructions in these sections to maintain your projector and transport it from place to place.
Projector Maintenance
Air Filter and Vent Maintenance
Replacing the Remote Control Batteries
Updating the Firmware
Transporting the Projector
Projector Maintenance
Your projector needs little maintenance to keep working at its best.
You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector
from overheating due to blocked ventilation.
The only parts you should replace are the air filter and remote control batteries. If any other part needs
replacing, contact Epson or an authorized Epson servicer.
This projector uses a sealed laser light source which does not need servicing and cannot be replaced.
Warning: Before cleaning any part of the projector, turn it off, unplug the power cord, and let it cool
down. Never open any cover on the projector, except as specifically explained in this manual.
Dangerous electrical voltages in the projector can injure you severely.
Warning: Do not try to service this product yourself, except as specifically explained in this manual.
Refer all other servicing to Epson qualified servicers.
Cleaning the Lens
Cleaning the Projector Case
Parent topic: Maintaining and Transporting the Projector
Cleaning the Lens
Clean the projector's lens periodically, or whenever you notice dust or smudges on the surface. Make
sure you unplug the projector before cleaning the lens.
• To remove dust or smudges, gently wipe the lens with lens-cleaning paper.
243
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the
lens. Do not spray any liquid directly on the lens.
Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the
projector may cause a fire.
Caution: Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens
to any impacts; you may damage it. Do not use canned air, or the gases may leave a residue. Avoid
touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface.
Parent topic: Projector Maintenance
Related tasks
Turning Off the Projector
Cleaning the Projector Case
Before cleaning the projector case, turn off the projector and unplug the power cord.
• To remove dust or dirt, use a soft, dry, lint-free cloth.
• To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid
directly on the projector.
Caution: Do not use wax, alcohol, benzine, paint thinner, or other chemicals to clean the projector
case. These can damage the case. Do not use canned air, or the gases may leave a flammable
residue.
Parent topic: Projector Maintenance
Related tasks
Turning Off the Projector
Air Filter and Vent Maintenance
Regular filter maintenance is important to maintaining your projector. Your Epson projector is designed
with an easily accessible, user-replaceable filter to protect your projector and make regular maintenance
simple. Filter maintenance intervals will depend on the environment.
If regular maintenance is not performed, your Epson projector will notify you when the temperature
inside the projector has reached a high level. Do not wait until this warning appears to maintain your
projector filter as prolonged exposure to high temperatures may reduce the life of your projector or laser.
244
Damage due to the failure to properly maintain the projector or its filter may not be covered by the
projector's Limited Warranty.
Cleaning the Air Filter and Vents
Replacing the Air Filter
Parent topic: Maintaining and Transporting the Projector
Related references
Projector Light Source Specifications
Cleaning the Air Filter and Vents
Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.
Clean them more often if you use the projector in an environment that is dustier than expected.
Caution: Do not use water or any detergent to clean the air filter. Do not use canned air, or the gases
may leave a flammable residue.
1. Turn off the projector and unplug the power cord.
2. Loosen the screws securing the air filter cover.
245
3. Open the air filter cover.
4. Pull the air filter out of the projector.
5. Tap each side of the filter 4 to 5 times to shake off any excess dust. Do this outside the room or
away from the projector.
Caution: Do not use excessive force when tapping the air filter, or it may crack and become
unusable. Do not rinse the air filter in water, or use any detergent or solvent to clean it. Do not use
canned air; the gases may leave a flammable residue, or push dust and debris into the projector's
optics or other sensitive areas.
246
6. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust.
Note: If dust is difficult to remove or the air filter is damaged, replace the air filter.
7. Place the air filter back in the projector as shown.
247
8. Close the air filter cover and tighten the screws.
Parent topic: Air Filter and Vent Maintenance
Related tasks
Turning Off the Projector
Replacing the Air Filter
You need to replace the air filter in the following situations:
• After cleaning the air filter, you see a message telling you to clean or replace it
• The air filter is torn or damaged
You can replace the air filter while the projector is mounted on the wall or ceiling.
1. Turn off the projector and unplug the power cord.
248
2. Loosen the screws securing the air filter cover.
3. Open the air filter cover.
249
4. Pull the air filter out of the projector.
Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations.
5. Place the new air filter in the projector as shown.
250
6. Close the air filter cover and tighten the screws.
Parent topic: Air Filter and Vent Maintenance
Related tasks
Turning Off the Projector
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
1. Remove the battery cover as shown.
251
2. Remove the old batteries.
Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on
your hands. If it gets on your hands, wash them immediately to avoid injury.
3. Insert the batteries with the +and –ends facing as shown.
Warning: Make sure the batteries are inserted in the correct positions. If the batteries are not
inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product.
4. Replace the battery cover and press it down until it clicks into place.
252
Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat
or flame. Keep batteries out of the reach of children; they are choking hazards and are very
dangerous if swallowed.
Parent topic: Maintaining and Transporting the Projector
Updating the Firmware
You can update the projector's firmware using a USB storage device or a computer and a USB cable.
If a firmware update is available for your product, you can select the Firmware Update option in the
projector's Initial/All Settings menu. The projector enters firmware update mode and is ready to perform
a firmware update. If a firmware update file is not found, the projector enters standby mode.
You can contact Epson Support or use the Epson Projector Management software to check for firmware
updates for your product. For more information, contact Epson Support.
Parent topic: Maintaining and Transporting the Projector
Transporting the Projector
The projector contains precision parts, some of which are glass. Follow the guidelines here to transport,
ship, or store the projector safely.
1. Remove any equipment connected to the projector.
2. Turn off the projector.
3. Make sure the power light is blue (but not flashing) and the status light is off, then unplug the
power cord.
4. Attach the lens cap.
5. Do one of the following:
• When transporting the projector a long distance or as checked luggage, pack it in a firm box with
cushioning around it and mark the box "Fragile."
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use
equivalent materials with cushioning around the projector. Mark the box "Fragile."
Note: Epson shall not be liable for any damages incurred during transportation.
Parent topic: Maintaining and Transporting the Projector
253
Solving Problems
Check the solutions in these sections if you have any problems using the projector.
Projection Problem Tips
Projector Light Status
Using the Projector Menu Displays
Solving Image or Sound Problems
Solving Projector or Remote Control Operation Problems
Solving Network Problems
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Projection Problem Tips
If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it
on.
If this does not solve the problem, check the following:
• The lights on the projector may indicate what the problem is.
• The solutions in this manual can help you solve many problems.
If none of these solutions help, you can contact Epson for technical support.
Parent topic: Solving Problems
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Projector Light Status
Related tasks
Cleaning the Lens
Cleaning the Air Filter and Vents
Turning On the Projector
Turning Off the Projector
Replacing the Air Filter
254
Projector Light Status
The lights on the projector indicate the projector status and let you know when a problem occurs. Check
the status and color of the lights and look for a solution in the table here.
Note: If the Indicators setting in the Operation menu is Off, all lights are off under normal projection
conditions.
1 Power light
2 Status light
3 Laser light
4 Temp (temperature) light
Power light Status light Laser light Temp light Status and solution
Blue Blue Off Off Normal operation.
255
Power light Status light Laser light Temp light Status and solution
Blue Flashing blue Off Off Warming up. Wait for an image to
appear.
Shutting down. (When the Status light
stops flashing, you can unplug the
projector.)
Blue Off Off Off In standby, sleep mode, or
monitoring.
Flashing blue Off Off Off Preparing for monitoring or quick
startup mode; all features are
disabled.
Flashing blue Varies Varies Flashing
orange
Projector is too hot.
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• Make sure the environmental
temperature is not too hot.
Off Flashing blue Off Orange Projector has overheated and turned
off. Leave it turned off to cool down.
After about five minutes, do the
following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Make sure the environmental
temperature is not too hot.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the
projector and contact Epson for
help.
256
Power light Status light Laser light Temp light Status and solution
Flashing blue Varies Flashing
orange
Varies Laser warning. Turn the projector off,
unplug it, and contact Epson for help.
Off Flashing blue Orange Off Laser has a problem. Turn the
projector off, unplug it, and contact
Epson for help.
Off Flashing blue Off Flashing
orange
A fan or sensor has a problem. Turn
the projector off, unplug it, and
contact Epson for help.
Off Flashing blue Flashing
orange
Off Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
Varies Flashing blue Flashing
orange
Varies Refresh Mode is in progress.
Varies Varies Fast
flashing
orange
Fast flashing
orange
The batch setup file is corrupt or the
USB flash drive is connected
incorrectly. Disconnect the USB flash
drive and turn off the projector.
Unplug the projector, plug it in again,
and try again.
Fast flashing
blue
Fast flashing
blue
Fast
flashing
orange
Fast flashing
orange
Writing the menu settings has failed
and an error in the projector's
firmware has occurred. Turn the
projector off, unplug it, and contact
Epson for help.
Note: If the lights display a pattern not listed in the tables above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Feature Settings - Operation Menu
Administration Settings - Management Menu
257
Using the Projector Menu Displays
The projector displays descriptions in the menu system to help you navigate the projector's settings. The
descriptions appear on the right side of the screen as you scroll the menu settings.
Parent topic: Solving Problems
Solving Image or Sound Problems
Check the solutions in these sections if you have any problems with projected images or sound.
Solutions When No Image Appears
Solutions When "No Signal" Message Appears
Solutions When "Not Supported" Message Appears
Solutions When Only a Partial Image Appears
Solutions When the Image is Not Rectangular
Solutions When the Image Contains Noise or Static
Solutions When the Image is Fuzzy or Blurry
Solutions When the Image Brightness or Colors are Incorrect
Solutions When an Afterimage Remains On the Projected Image
Solutions to Sound Problems
Solutions to Problems Using Content Playback
Parent topic: Solving Problems
Solutions When No Image Appears
If no image appears, try the following solutions:
• Make sure the lens cap is off.
• Press the A/V Mute button on the remote control to see if the image was temporarily turned off.
• Make sure all necessary cables are securely connected and the power is on for the projector and
connected video sources.
• If you connected your video source to the Computer2/Monitor Out port, make sure you set the
Monitor Out Port setting to Computer2.
• Make sure the image being projected is not completely black (only when projecting computer images).
• Press the projector's power button to wake it from standby or sleep mode. Also see if your connected
computer is in sleep mode or displaying a blank screen saver.
258
• Press the Menu button. If the projector menu displays, there may be a problem with the connected
video source, cable connection, or port.
• Adjust the Brightness setting on the Image menu.
• Adjust the brightness of your projector's light source.
• Check the Display menu to make sure the Messages setting is set to On.
• If the projector does not respond when you press the control panel buttons, the buttons may be
locked. Unlock the buttons.
• If the projector does not respond when you press buttons on the remote control, make sure the remote
receivers are turned on.
• For images projected with Windows Media Center, reduce the screen size from full screen mode.
• For images projected from applications using Windows DirectX, turn off DirectX functions.
• The projector may not be able to project copyrighted videos that you play back on a computer. For
details, see the manual supplied with your computer.
• If you cannot project a screen mirroring image, make sure the Capture setting is disabled.
• If the other solutions do not solve the problem, reset all of the projector settings using the options on
the Reset menu.
Parent topic: Solving Image or Sound Problems
Related references
Input Signal Settings - Signal I/O Menu
Image Quality Settings - Image Menu
Setup Settings - ECO Menu
Display Settings - Display Menu
Related tasks
Unlocking the Projector's Buttons
Selecting an Image Source
Shutting Off the Picture and Sound Temporarily
Solutions When "No Signal" Message Appears
If the "No Signal" message appears, try the following solutions:
• Press the Source Search button and wait a few seconds for an image to appear.
• Turn on the connected computer or video source, and press its play button to begin your presentation,
if necessary.
259
• Check the connection from the projector to your video sources.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• If necessary, turn the projector and the connected computer or video source off and then on again.
• If you are projecting from an HDMI source, change the HDMI EQ Setting setting in the projector's
Signal I/O menu.
• If you are projecting using a thumb-sized media streaming device, set the HDMI EQ Setting to 1in the
projector's Signal I/O menu.
• If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.
• Connect the video source directly to the projector.
• Try a different video cable.
• If the other solutions do not solve the problem, reset all of the projector settings using the options on
the Reset menu.
Displaying From a PC Laptop
Displaying From a Mac Laptop
Parent topic: Solving Image or Sound Problems
Related tasks
Selecting an Image Source
Connecting to an External Computer Monitor
Related topics
Connecting to Video Sources
Connecting to Computer Sources
Displaying From a PC Laptop
If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to
display on an external monitor.
1. Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD. (See your
laptop manual for details.) Wait a few seconds for an image to appear. To display on both the
laptop's monitor and the projector, try pressing the same keys again.
Note: On Windows 7 or later, hold down the Windows key and press Pat the same time, then click
Duplicate.
260
2. If the same image is not displayed by the laptop and projector, check the Windows Display utility to
make sure the external monitor port is enabled and extended desktop mode is disabled. (See your
computer or Windows manual for instructions.)
3. If necessary, check your video card settings and set the multiple display option to Clone,Mirror, or
Duplicate.
Parent topic: Solutions When "No Signal" Message Appears
Displaying From a Mac Laptop
If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop
for mirrored display. (See your laptop manual for details.)
1. Open the System Preferences utility and select Displays,Display, or Color LCD.
2. Click the Arrange or Arrangement tab.
3. Select the Mirror Displays checkbox.
Parent topic: Solutions When "No Signal" Message Appears
Solutions When "Not Supported" Message Appears
If the "Not Supported" message appears, try the following solutions:
• Make sure the correct input signal is selected on the Signal I/O menu.
• Make sure the computer's display resolution does not exceed the projector's resolution and frequency
limit. If necessary, select a different display resolution for your computer. (See your computer manual
for details.)
Parent topic: Solving Image or Sound Problems
Related references
Input Signal Settings - Signal I/O Menu
Solutions When Only a Partial Image Appears
If only a partial computer image appears, try the following solutions:
• For VGA connections, press the Auto button on the remote control to optimize the image signal.
• Make sure you selected the correct Screen Type setting in the projector's Installation menu for the
screen you are using. If there are margins between the edge of the image and the projected screen
frame, use the Screen Position setting to adjust the position of the image.
• Make sure the Scale setting in the Image menu is turned off.
• Make sure the Resolution setting in the Image menu is set correctly for the input signal.
261
• Try adjusting the image position using the Position setting in the Image menu.
• Press the Aspect button on the remote control to select a different image aspect ratio.
• Check the Blanking setting in the Installation menu.
• If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the
projector returns to a full display.
• Check your computer display settings to disable dual display and set the resolution within the
projector's limits. (See your computer manual for details.)
• Check the resolution assigned to your presentation files to see if they are created for a different
resolution than you are projecting in. (See your software help for details.)
• Make sure you selected the correct Projection setting in the Installation menu.
• Try adjusting the image position using the Image Shift setting.
• If you are projecting in Content Playback mode, make sure you are using the correct Overlay Effect
setting in the Operation > Content Playback menu.
Parent topic: Solving Image or Sound Problems
Related references
Installation Settings - Installation Menu
Input Signal Settings - Signal I/O Menu
Image Quality Settings - Image Menu
Related tasks
Changing the Image Aspect Ratio
Zooming Into and Out of Images
Solutions When the Image is Not Rectangular
If the projected image is not evenly rectangular, try the following solutions:
• If the projector is not mounted on the wall or ceiling, place it directly in front of the screen, lining up the
lens with the center of the screen, if possible.
• Use the Image Shift setting to adjust the image position, rather than moving the projector.
• Press the keystone buttons on the projector to adjust the image shape.
• Adjust the image shape using the individual Geometry Correction settings in the Installation menu.
Parent topic: Solving Image or Sound Problems
262
Related references
Installation Settings - Installation Menu
Image Quality Settings - Image Menu
Related tasks
Correcting Image Shape with Arc Correction
Correcting Image Shape with the Keystone Buttons
Correcting Image Shape with Quick Corner
Solutions When the Image Contains Noise or Static
If the projected image seems to contain electronic interference (noise) or static, try the following
solutions:
• Check the cables connecting your computer or video source to the projector. They should be:
• Separated from the power cord to prevent interference
• Securely connected at both ends
• Not connected to an extension cable
• Make sure you selected the correct Signal Format or EDID settings in the projector's Signal I/O
menu, if available for your image source.
• Adjust the Noise Reduction,MPEG Noise Reduction, and Deinterlacing settings in the projector's
Image menu.
• If available for your video source, select Auto as the Resolution setting in the Image menu.
• Select a computer video resolution and refresh rate that are compatible with the projector.
• If you are projecting from a computer using a VGA cable, press the Auto button on the remote control
to automatically adjust the tracking and sync. If the problem remains, display a uniformly patterned
image on the screen and manually adjust the Tracking and Sync settings.
• If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to
improve image quality.
• If you connected an extension power cable, try projecting without it to see if it caused interference in
the signal.
Parent topic: Solving Image or Sound Problems
Related references
Input Signal Settings - Signal I/O Menu
Image Quality Settings - Image Menu
263
Supported Video Display Formats
Related topics
Connecting to Video Sources
Connecting to Computer Sources
Solutions When the Image is Fuzzy or Blurry
If the projected image is fuzzy or blurry, try the following solutions:
• Adjust the image focus.
• Clean the projector lens.
• Position the projector close enough to the screen, and directly in front of it.
• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
• Adjust the Sharpness setting to improve image quality.
• If you are projecting from a computer using a VGA cable, press the Auto button on the remote control
to automatically adjust the tracking and sync. If any bands or overall blurriness remain, display a
uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
• If you are projecting from a computer, use a lower resolution or adjust the computer's resolution to
match the projector's native resolution, if possible.
Parent topic: Solving Image or Sound Problems
Related references
Image Quality Settings - Image Menu
Related tasks
Cleaning the Lens
Focusing the Image
Solutions When the Image Brightness or Colors are Incorrect
If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
• Press the Color Mode button on the remote control to try different color modes for the image and
environment.
• Check your video source settings.
• Adjust the available settings on the Image menu for the current input source, such as Brightness,
Contrast,Tint,White Balance,Color Saturation and RGBCMY.
264
• Make sure you selected the correct Signal Format or EDID setting in the Signal I/O menu, if available
for your video source.
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• Position the projector close enough to the screen.
• Make sure you have run the Light Source Calibration in the Management menu recently. If using
multiple projectors, perform the calibration on all projectors to ensure a consistent image quality.
• When using multiple projectors and the color of the projected image does not match between the
projectors, set Color Mode to Multi-Projection and adjust the Color Uniformity, Light Source
Brightness Control, Color Matching, Black Level, and RGBCMY settings to resolve the color
differences.
Parent topic: Solving Image or Sound Problems
Related references
Administration Settings - Management Menu
Input Signal Settings - Signal I/O Menu
Image Quality Settings - Image Menu
Solutions When an Afterimage Remains On the Projected Image
If you see an afterimage in the projected image, select Refresh Mode >Start in the Management menu.
Parent topic: Solving Image or Sound Problems
Related references
Administration Settings - Management Menu
Solutions to Sound Problems
If there is no sound when you expect it or the volume is too low or high, try the following solutions:
• Adjust the projector's volume settings.
• Press the A/V Mute button on the remote control to resume video and audio if they were temporarily
stopped.
• Check your computer or video source to make sure the volume is turned up and the audio output is set
for the correct source.
• Try disconnecting and reconnecting the audio cable.
• Check the audio cable connections between the projector and your video source.
265
• If you do not hear sound from an HDMI source, set the connected device to PCM output.
• Make sure any connected audio cables are labeled "No Resistance."
• If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac
supports audio through the HDMI port. If not, you need to connect an audio cable.
• If you want to use a connected audio source when the projector isn't projecting any images, set the
Quick Startup option in the Operation menu to Off and make sure the A/V Output setting in the
Signal I/O menu is set to Always On.
• If the volume for the computer is set to the minimum while the projector's volume is set to maximum,
the sound level may be mixed. Turn up the computer's volume and decrease the projector's volume
(when using Epson iProjection [Windows/Mac]).
• Make sure the Audio Output Device option is set to the correct audio port for your video device.
• If you turn the projector on immediately after turning it off, the cooling fans may run at high speed
momentarily and cause an unexpected noise. This is normal.
Parent topic: Solving Image or Sound Problems
Related references
Input Signal Settings - Signal I/O Menu
Related tasks
Connecting to External Speakers
Connecting to a Computer for Sound
Connecting to a Video Source for Sound
Controlling the Volume with the Volume Buttons
Solutions to Problems Using Content Playback
If you cannot play back a playlist correctly, try the following solutions:
• Check the following on all projectors:
• All projectors are the same model. If any of the projectors are a different model or have a different
resolution, synchronized playback may not be performed properly.
• Make sure the name, date, and time settings are correct.
• Make sure all projectors are connected to the same network.
• Make sure the Content Playback setting is turned on in the Operation menu.
• Make sure your USB device contains a playlist.
266
• Make sure your USB device is connected directly to the projector and not through a USB hub or card
reader.
• If the USB device is partitioned, you may not be able to play back playlists. Delete all of the partitions
before saving the playlists on your USB device.
• Do not share a playlist between projectors that are different in resolution. Color and shape effects
added by using the Overlay Effect setting may not be reproduced correctly.
Parent topic: Solving Image or Sound Problems
Related tasks
Switching to Content Playback Mode
Setting the Date and Time
Connecting a USB Device or Camera to the Projector
Related topics
Using the Projector on a Network
Solving Projector or Remote Control Operation Problems
Check the solutions in these sections if you have problems operating the projector or remote control.
Solutions to Projector Power or Shut-Off Problems
Solutions to Remote Control Problems
Solutions to Password Problems
Solutions When a Battery Message Appears
Parent topic: Solving Problems
Solutions to Projector Power or Shut-Off Problems
If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:
• Make sure the power cord is securely connected to the projector and to a working electrical outlet.
• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to
turn on the projector.
• If the projector's laser shuts off unexpectedly, it may have entered standby mode after a period of
inactivity. Press the power button to wake the projector and adjust the Sleep Mode setting to change
the sleep interval. The A/V Mute Timer may be set. Set the A/V Mute Timer to Off in the Operation
menu.
267
• If the projector's laser shuts off, the Status light is flashing, and the Temp light is on, the projector has
overheated and shut off. Check the solutions for this light status.
• If the power button on the remote control does not turn on the projector, check its batteries and make
sure the Remote Receiver setting is turned on in the projector's menu, if available.
• The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord
and contact Epson.
• The cooling fans may run in standby status depending on the projector settings. Also, when the
projector wakes from standby status, the fans may cause an unexpected noise. This is not a
malfunction.
Parent topic: Solving Projector or Remote Control Operation Problems
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Projector Light Status
Feature Settings - Operation Menu
Related tasks
Unlocking the Projector's Buttons
Solutions to Remote Control Problems
If the projector does not respond to remote control commands, try the following solutions:
• Check that the remote control batteries are installed correctly and have power. If necessary, replace
the batteries.
• Make sure you are operating the remote control within the reception angle and range of the projector.
• Make sure the projector is not warming up or shutting down.
• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release
the button to wake the remote control up.
• Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the
projector's remote receivers. Dim the lights or move the projector away from the sun or interfering
equipment.
• If available, turn on one of the remote receivers in the projector's menu system, or check if all the
remote receivers were turned off.
• If the remote receiver setting is off, press and hold the Menu button on the remote for at least 15
seconds to restore the default setting.
268
• If you assigned an ID number to the remote control to operate multiple projectors, you may need to
check or change the ID setting (feature not available with all projectors).
• To set the remote control so it will operate any projector, hold down the ID button and press the 0/All
button.
• If you lose the remote control, you can purchase another from an Epson parts distributor.
Parent topic: Solving Projector or Remote Control Operation Problems
Related references
Remote Control Operation
Related tasks
Installing Batteries in the Remote Control
Replacing the Remote Control Batteries
Solutions to Password Problems
If you cannot enter or remember a password, try the following solutions:
• You may have turned on password protection without first setting a password. Try entering 0000 using
the remote control. If you lose the remote control, you cannot enter a password. Order a new one from
Epson.
• If you have entered an incorrect password too many times and see a message displaying a request
code, write down the code and contact Epson. Do not attempt to enter the password again. Provide
the request code and proof of ownership for assistance in unlocking the projector.
• If you set a Epson Web Control password and forgot the user ID or password, try entering the
following:
• User ID: EPSONWEB
• Default password: admin
• If you set a Remote password (in Epson Web Control) and forgot the user ID or password, try entering
the following:
• User ID: EPSONREMOTE
• Default password: guest
Parent topic: Solving Projector or Remote Control Operation Problems
Related concepts
Projector Security Features
269
Solutions When a Battery Message Appears
If you see a message telling you that the battery that saves your clock settings is running low, contact
Epson for help.
Parent topic: Solving Projector or Remote Control Operation Problems
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Solving Network Problems
Check the solutions in these sections if you have problems using the projector on a network.
Solutions When Wireless Authentication Fails
Solutions When You Cannot Access the Projector Through the Web
Solutions When Network Alert E-Mails are Not Received
Solutions When the Image Contains Static During Network Projection
Solutions When You Cannot Connect Using Screen Mirroring
Solutions When the Image or Sound Contains Static When Using Screen Mirroring
Solutions When the Projected Screen is not Shared Correctly
Parent topic: Solving Problems
Solutions When Wireless Authentication Fails
If you cannot authenticate a wireless connection, try the following solutions:
• If the wireless settings are correct, but authentication fails, you may need to update the Date & Time
settings in the Management menu, if available.
• Make sure the Wireless LAN Power setting is set to On.
• Check the Security settings and passphrase in the Network menu.
• Make sure the connected device is on and operating properly.
• Make sure you are using the correct Epson wireless LAN module.
• If the access point security is WPA3-EAP, change the access point setting to WPA2/WPA3-EAP.
Parent topic: Solving Network Problems
Related references
Administration Settings - Management Menu
270
Network Settings - Network Menu
Event ID Code List
Related tasks
Setting the Date and Time
Solutions When You Cannot Access the Projector Through the Web
If you are unable to access the projector through a web browser, make sure you are using the correct ID
and password, which are case sensitive.
Note: You cannot change the user ID.
• You may need to log in to access some options on the Web Control screen. If you see a log in window,
enter EPSONWEB as the user ID and enter the password set in the projector's Network menu as the
password. The default password is admin.
• Avoid connecting via a proxy server.
• Make sure you have access to the network the projector is on.
• Check the IP address on the projector, then reenter the IP address in the browser search bar.
Note: The user ID and password are case sensitive.
Parent topic: Solving Network Problems
Solutions When Network Alert E-Mails are Not Received
If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's Network Mail
Notification menu or in the network software.
• Set the Standby Mode setting to Communication On so the network software can monitor the
projector in standby mode.
Parent topic: Solving Network Problems
Related references
Network Projector E-mail Alert Messages
271
Related tasks
Setting Up Projector Network E-Mail Alerts
Solutions When the Image Contains Static During Network Projection
If the projected image contains static during network projection, try the following solutions:
• Check for any obstacles between the access point, the computer, the mobile device, and the projector.
If necessary, change their positions to improve communication. Also make sure that they are not too
far apart; move them closer together and try to connect again.
• If the wireless connection is slow or your projected image contains noise, check for interference from
other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away
or expand your wireless bandwidth.
• If the connection speed declines, reduce the number of connected devices.
Parent topic: Solving Network Problems
Solutions When You Cannot Connect Using Screen Mirroring
If you are unable to connect to the projector using Screen Mirroring, try the following solutions:
• Select On as the Screen Mirroring setting in the projector's Network menu.
• Select On as the Simple AP setting in the projector's Network menu.
• Make sure the Display Name setting does not contain a dash ("-") or it may not be displayed correctly
on the mobile device.
• Select Off as the Screen Mirroring setting, then select On again.
• Make sure the mobile device settings are correct and restart the device.
• You may not be able to connect immediately after disconnecting from the projector. Wait a while and
try connecting again.
• If you have previously connected to the projector using Screen Mirroring, the device may have saved
the previous connection information. Delete the saved information and connect to the projector from
the list of available devices.
• If you are unable to use two Screen Mirroring sources at the same time, set the Interrupt Connection
setting to Off.
Parent topic: Solving Network Problems
272
Solutions When the Image or Sound Contains Static When Using Screen Mirroring
If the projected image or sound contains static when connecting using Screen Mirroring, try the following
solutions:
• Avoid covering the Wi-Fi antenna of the mobile device.
• If you use a Screen Mirroring connection and an internet connection at the same time, the image may
freeze or contain noise. Disconnect from the internet to improve the connection speed of the mobile
device.
• Make sure the projection contents meet the Screen Mirroring requirements.
• Depending on the settings of the mobile device, the connection may be lost when the device enters
power saving mode. Check the power saving settings on the mobile device.
• Make sure your mobile device has the latest version of its wireless driver and firmware installed.
Parent topic: Solving Network Problems
Solutions When the Projected Screen is not Shared Correctly
If the Screen Sharing feature does not deliver the screen to a receiving projector properly, try the
following solutions:
• Connect the projector to the same network as the projector that is sharing its screen.
• Make sure the receiving projector supports the Screen Sharing function.
• Make sure the Screen Sharing setting in the Network menu is set to On for all projectors.
• Close any running Epson iProjection (Windows/Mac) software.
• Make sure the image being projected is not protected by copyright.
• Make sure Sharing is displayed on the status bar that appears in the upper center part of the screen.
If it is not displayed, try reconnecting.
Parent topic: Solving Network Problems
Related concepts
Screen Sharing
Related references
Network Settings - Network Menu
Where to Get Help (U.S. and Canada)
If you need to contact Epson for technical support services, use the following support options.
273
Internet Support
Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada) and select
your product for solutions to common problems with your projector. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.
Speak to a Support Representative
To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the
duration of your warranty period. You may also speak with a projector support specialist by dialing (562)
276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are Monday through Friday, 7 AM to 4 PM, Pacific Time.
Days and hours of support are subject to change without notice. Toll or long distance charges may
apply.
Before you call, have the following information ready:
• Product name
• Product serial number (located on the bottom or rear of the projector, or in the menu system)
• Proof of purchase (such as a store receipt) and date of purchase
• Computer or video configuration
• Description of the problem
Purchase Supplies and Accessories
You can purchase screens, other optional accessories, and replacement parts from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in
Canada. Or you can purchase online at epsonstore.com (U.S. sales) or epsonstore.ca (Canadian sales).
You can purchase a replacement remote control from an Epson parts distributor here (U.S. sales) or
here (Canadian sales).
Parent topic: Solving Problems
Related references
Projector Light Status
Where to Get Help (Latin America)
If you need to contact Epson for technical support services, use the following support options.
274
Internet Support
Visit Epson's support website at latin.epson.com/support and select your product for solutions to
common problems with your projector. You can download utilities and documentation, get FAQs and
troubleshooting advice, or e-mail Epson with your questions.
Speak to a Support Representative
Before you call for support, please have the following information ready:
• Product name
• Product serial number (located on the bottom or rear of the projector, or in menu system)
• Proof of purchase (such as a store receipt) and date of purchase
• Computer or video configuration
• Description of the problem
Then call:
Country Telephone
Argentina (54 11) 5167-0300
0800-288-37766
Bolivia* 800-100-116
Brazil 0800-007-5000
Chile (56 2) 2484-3400
Colombia Bogota: (57 1) 592-2200
Other cities: 018000-915235
Costa Rica 800-377-6627
Dominican Republic* 1-888-760-0068
Ecuador* 1-800-000-044
El Salvador* 800-6570
Guatemala* 1-800-835-0358
Mexico Mexico City: (52 55) 1323-2052
Other cities: 01-800-087-1080
275
Country Telephone
Nicaragua* 00-1-800-226-0368
Panama* 00-800-052-1376
Paraguay 009-800-521-0019
Peru Lima: (51 1) 418-0210
Other cities: 0800-10126
Uruguay 00040-5210067
Venezuela (58 212) 240-1111
*Contact your local phone company to call this toll-free number from a mobile phone.
Note: Toll or long distance charges may apply. If your country does not appear on the list, contact the
sales office in the nearest country.
Purchase Supplies and Accessories
You can purchase optional accessories and replacement parts from an Epson authorized reseller. To
find the nearest reseller, go to latin.epson.com. Or you can contact your nearest sales office as
described in "Where to Get Help."
Parent topic: Solving Problems
Related references
Projector Light Status
276
Technical Specifications
These sections list the technical specifications of your projector.
General Projector Specifications
Projector Light Source Specifications
Remote Control Specifications
Projector Dimension Specifications
Projector Electrical Specifications
Projector Environmental Specifications
Projector Safety and Approvals Specifications
Supported Video Display Formats
USB Display System Requirements
General Projector Specifications
Type of display Poly-silicon TFT active matrix
Native resolution 1080p (1366 × 768 × 2)
Lens F=1.5
Focal length: 3.9 mm
Color reproduction Full color, up to 1.07 billion colors
277
Brightness Normal Light Source mode:
White light output 5000 lumens (ISO 21118 standard)
Color light output 5000 lumens
Quiet or Extended Light Source mode:
White light output 3500 lumens (ISO 21118 standard)
Custom mode:
White light output 3500 to 5000 lumens (ISO 21118 standard)
Note: Color brightness (color light output) and white brightness
(white light output) will vary depending on usage conditions. Color
light output measured in accordance with IDMS 15.4; white light
output measured in accordance with ISO 21118.
Contrast ratio Over 2,500,000:1 with Dynamic Color Mode, Normal Light Source
Mode, and Wide Zoom on
Image size
(in native aspect ratio)
65 inches (1.65 m) to 130 inches (3.30 m)
Projection distance
(in native aspect ratio)
15.4 inches (0.39 m) to 31.6 inches (0.80 m)
Projection methods Front, rear, wall-mounted, table-mounted, ceiling-mounted
Optical aspect ratio
(width-to-height)
16:9
Focus adjustment Manual
Zoom adjustment Digital
Zoom ratio
(Tele-to-Wide)
1.0 to 1.35
Internal sound system 8 W × 8W stereo
Noise level 36 dB (Normal or Extended Light Source Mode)
27 dB (Quiet Light Source Mode)
Keystone correction angle ± 3°
278
USB Type B port compatibility One USB 2.0 compliant port for USB display, firmware update, or
copying menu settings
USB Type A port compatibility Two USB 2.0 compliant ports for USB memory device, Epson
document camera, wireless LAN module connection, firmware
update, or copying menu settings
One port for providing power to a streaming media device (5 V, 2 A)
Parent topic: Technical Specifications
Projector Light Source Specifications
Type Laser diode
Light source output power Up to 104.5 W
Wavelength 449 to 461 nm
Light source life
(approximate)
Normal or Quiet Light Source Mode:
Up to about 20000 hours
Extended Light Source Mode:
Up to about 30000 hours
Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
Parent topic: Technical Specifications
Remote Control Specifications
Reception range 19.7 feet (6 m)
Batteries Two alkaline or manganese AA
Parent topic: Technical Specifications
Projector Dimension Specifications
Height (excluding feet) 8.25 inches (209.5 mm)
279
Width 18 inches (458 mm)
Depth (excluding cable cover) 14.8 inches (375 mm)
Weight (excluding cable cover) 20.7 lb (9.4 kg)
Parent topic: Technical Specifications
Projector Electrical Specifications
Rated frequency 50/60 Hz
Power supply 100 to 240 V AC ±10%
3.8 to 1.7 A
Power consumption
(100 to 120 V)
Operating:
Normal or Custom Power Consumption mode: 381 W
Extended or Quiet Power Consumption mode: 270 W
Standby:
0.5 W (Communication Off), 2.0 W (Communication On)
Power consumption
(220 to 240 V)
Operating:
Normal or Custom Power Consumption mode: 366 W
Extended or Quiet Power Consumption mode: 262 W
Standby:
0.5 W (Communication Off), 2.0 W (Communication On)
Parent topic: Technical Specifications
280
Projector Environmental Specifications
Temperature Operating - Single projector:
32 to 113 °F (0 to 45 °C)
Operating - Multiple projectors:
32 to 104 °F (0 to 40 °C)
Storage:
14 to 140 °F (–10 to 60 °C)
Humidity (relative, non-
condensing)
Operating: 20 to 80%
Storage: 10 to 90%
Operating altitude Up to 4921 feet (1500 m)
Up to 10000 feet (3048 m) with High Altitude Mode enabled
Parent topic: Technical Specifications
Projector Safety and Approvals Specifications
United States FCC Part 15 Class B (DoC)
UL60950-1 2nd edition (cTUVus Mark)
Canada ICES-003 Class B
CSA C22.2 No. 60950-1
Parent topic: Technical Specifications
Supported Video Display Formats
For best results, your computer's monitor port or video card resolution should be set to display in the
projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other
computer display resolutions, so your image will be resized to fit automatically.
Your computer's monitor port or video card refresh rate (vertical frequency) must be compatible with the
projector. (See your computer or video card manual for details.)
The table here lists the compatible refresh rate and resolution for each compatible video display format.
281
Display format Refresh rate (in Hz) Resolution (in pixels)
Computer signals (analog RGB)
VGA 60/72/75/85 640 × 480
SVGA 60/72/75/85 800 × 600
XGA 60/70/75/85 1024 × 768
WXGA 60-1 1280 × 768
60-3 1366 × 768
60/75/85 1280 × 800
WXGA+ 60/75/85 1440 × 900
WXGA++ 60 1600 × 900
SXGA1 70/75/85 1152 × 864
SXGA2 60/75/85 1280 × 960
SXGA3 60/75/85 1280 × 1024
SXGA+ 60/75 1400 × 1050
WSXGA+ 60 1680 × 1050
UXGA 60 1600 × 1200
1920 × 1080 50/60 1920 × 1080
WUXGA (Reduced Blanking) 60 1920 × 1200
Composite video
TV (NTSC, NTSC4.43) 60 720 × 480
TV (SECAM) 50 720 × 576
TV (PAL, N-PAL) 50 720 × 576
TV (PAL, M-PAL) 60 720 × 576
Component video
SDTV (480p) 59.94 720 × 480
SDTV (576p) 50 720 × 576
HDTV (720p) 50/59.94/60 1280 × 720
282
Display format Refresh rate (in Hz) Resolution (in pixels)
HDTV (1080p) 50/59.94/60 1920 × 1080
HDMI/HDBaseT Control input signals
VGA 60 640 × 480
SVGA 60 800 × 600
XGA 60 1024 × 768
WXGA 60 1280 × 800
60-3 1366 × 768
WXGA+ 60 1440 × 900
WXGA++ 60 1600 × 900
WSXGA+ 60 1680 × 1050
SXGA2 60 1280 × 960
SXGA3 60 1280 × 1024
SXGA+ 60 1400 × 1050
UXGA 60 1600 × 1200
1920 × 1080 50/60 1920 × 1080
WUXGA (Reduced Blanking) 60 1920 × 1200
QXGA 60 2048 × 1536
WQHD 60 2560 × 1440
WQXGA (Reduced Blanking) 60 2560 × 1600
SDTV (480i/480p) 59.94 720 × 480
SDTV (576i/576p) 50 720 × 576
HDTV (720p) 50/59.94/60 1280 × 720
HDTV (1080i) 50/59.94/60 1920 × 1080
HDTV (1080p) 23.98/24/29.97/30/50/59.94/60 1920 × 1080
4K 23.98/24/25/29.97/30/50/59.94/6
0
3840 × 2160
283
Display format Refresh rate (in Hz) Resolution (in pixels)
4K (SMPTE) 23.98/24/50/59.94/60 4096 × 2160
Unique Aspect
Unique Aspect (16:6) 60 1920 × 720
Unique Aspect (21:9) 60 1920 × 810
3240 × 1080 (2 projectors
connected by a daisy chain)
60 3240 × 1080
Parent topic: Technical Specifications
USB Display System Requirements
Your computer system must meet the system requirements here to use the projector's USB Display
software.
Requirement Windows Mac
Operating system Windows 7 Ultimate, Enterprise,
Professional, and Home Premium (32-
and 64-bit); Home Basic and Starter (32-
bit)
OS X 10.11.x (64-bit), macOS
10.12.x (64-bit), macOS 10.13.x (64-
bit), macOS 10.14.x (64-bit), and
macOS 10.15.x (64-bit)
Windows 8.x, Pro, and Enterprise (32-
and 64-bit)
Windows 10 Home, Pro, and Enterprise
(32- and 64-bit)
CPU Intel Core2 Duo or faster (Intel Core i3 or
faster recommended)
Intel Core2 Duo or faster (Intel Core
i5 or faster recommended)
Memory 2GB or more (4GB or more recommended)
Hard disk space 20MB or more
Display Resolution between 640 × 480 and 1920 × 1200, 16-bit color or greater
Parent topic: Technical Specifications
Related references
Input Signal Settings - Signal I/O Menu
284
Notices
Check these sections for important notices about your projector.
Recycling (U.S. and Canada)
Important Safety Information
Laser Safety Information
Laser Light Source Warning
Important Safety Instructions
List of Safety Symbols (corresponding to IEC60950-1 A2)
FCC Compliance Statement
Binding Arbitration and Class Waiver
Trademarks (U.S. and Canada)
Trademarks (Latin America)
Copyright Notice
Recycling (U.S. and Canada)
Epson offers a recycling program for end of life products. Please go to this site for information on how to
return your products for proper disposal.
Parent topic: Notices
Important Safety Information
Caution: Never look into the projector lens when the laser is turned on; the bright light can damage your
eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except
the filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as
specifically explained in this User's Guide, do not attempt to service this product yourself. Refer all
servicing to qualified service personnel.
Warning: The projector and its accessories come packaged in plastic bags. Keep plastic bags away
from small children to avoid any risk of suffocation.
Parent topic: Notices
285
Laser Safety Information
This projector is a Class 2 laser product that complies with the IEC/EN60825-1:2007 international
standard for lasers. Follow these safety instructions when using the projector.
Warning: Possibly hazardous optical radiation emitted from this product. Do not look at operating light
source. Eye injury may result.
• If an error occurs in the projector, turn off the power and unplug the projector immediately. Continuing
to use the projector could result in an electric shock, fire, or visual impairment. Contact Epson support.
• Do not attempt to disassemble or modify the projector. The projector contains a high-power laser
component. Serious injury could result.
• Do not look into the lens during projection. Also, do not look into the lens using optical devices, such
as a magnifying glass or telescope. This could cause visual impairment.
• Do not place flammable objects in front of the lens. Objects could catch fire.
• When turning on the projector at a distance using the remote control, make sure no one is looking into
the lens.
• Do not allow small children to operate the projector. Children must be accompanied by an adult.
• Do not apply optical devices, such as a magnifying glass or reflector, to the projected image. Using the
projector may result in physical harm, fire, or an accident.
• Do not block the light from the lens during projection. The high temperature in this area could cause
burns, fire, or other damage. The lens may overheat due to the reflected light and could cause the
projector to malfunction.
• Before using the projector, make sure there is nothing in the area that could reflect the projected
image.
• When disposing of the projector, do not disassemble it. Dispose of the projector in accordance with
your local or national laws and regulations.
286
Labels are attached to the projector to indicate it is a Class 2 laser product and complies with FDA
performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated
June 24, 2007:
•Inside
287
•Top/Side
288
•Top
Parent topic: Notices
Laser Light Source Warning
Refer to the table here for the Exposure Hazard Values (EHV) in accordance with the IEC62471-2:2009
standard. The EHV indicates the hazard level for objects in front of the light source for 0.25 seconds at a
distance of 7.9 inches (20 cm). The higher the value, the greater the hazard level.
Exposure Hazard Value 0.68
Parent topic: Notices
Important Safety Instructions
Follow these safety instructions when setting up and using the projector:
• Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid
standing in front of the projector so the bright light does not shine into your eyes.
• Do not place any flammable objects in front of the projector lens, otherwise, a fire may occur.
289
• Do not touch the lens with bare hands.
• Do not place the projector on an unstable cart, stand, or table or on a surface that is unable to support
its weight. Otherwise, it could fall or topple causing an accident and injury.
• If the projector is mounted on a ceiling or wall, it should be installed by qualified technicians using
mounting hardware designed for use with this projector. When installing the projector in a high
position, take measures to prevent it from falling by using wires to ensure safety in an emergency,
such as an earthquake, and to prevent accidents. If the projector is not installed correctly, the projector
could fall. This may result in injury or accidents. Contact your dealer to carry out the installation work.
• Failure to install the ceiling mount and projector may cause the projector to fall. After installing the
specific Epson mount that supports your projector, make sure you secure the mount to all of the
projector's ceiling mount fixing points. Also, secure the projector and the mounts using wire that is
strong enough to hold their weight.
• Do not install in locations where salt damage could occur, or in locations subject to corrosive gas such
as sulphuric gas from hot springs. Otherwise, corrosion could cause the projector to fall. It could also
cause the projector to malfunction.
• When installing or adjusting a ceiling or wall mount, do not use adhesives to prevent the screws from
loosening and do not use oils or lubricants. This may cause the projector case to crack and the
projector to fall from its ceiling mount. This could cause serious injury to anyone under the mount and
could damage the projector.
• Do not install the projector in locations exposed to high humidity and dust, such as on a kitchen
counter, in the kitchen, or near a humidifier, or in locations exposed to oil smoke or steam. Doing so
could cause fire or electric shock.
Examples of environments that could cause the projector to fall due to case deterioration:
• Locations subject to excessive smoke or airborne oil particles, such as factories or kitchens
• Locations containing volatile solvents or chemicals, such as factories or laboratories
• Locations where the projector could be subjected to detergents or chemicals, such as factories or
kitchens
• Locations in which aroma oils are often used, such as relaxation rooms
• Near devices that produce excessive smoke, airborne oil particles, or foam at events
• Do not use the projector near water, sources of heat, high-voltage electrical wires, or sources of
magnetic fields.
• Use the type of power source indicated on the projector. Use of a different power source may result in
fire or electric shock. If you are not sure of the power available, consult your dealer or power company.
• Place the projector near a wall outlet where the plug can be easily unplugged.
290
• Take the following precautions when handling the plug: Do not hold the plug with wet hands. Do not
insert the plug into a dusty outlet. Insert the plug firmly into the outlet. Do not pull the power cord when
disconnecting the plug; always be sure to hold the plug when disconnecting it. Do not overload wall
outlets, extension cords, or power strips. Failure to comply with these precautions could result in fire or
electric shock.
• Do not place the projector where the cord can be walked on. This may result in fraying or damage to
the plug.
• Unplug the projector from the wall outlet and allow to cool before cleaning. Use a dry cloth (or, for
stubborn dirt or stains, a moist cloth that has been wrung dry) for cleaning. Do not use liquid or aerosol
cleaners, any sprays containing flammable gas, or solvents such as alcohol, paint thinner, or benzine.
• Do not block the slots and openings in the projector case. They provide ventilation and prevent the
projector from overheating. If the vents are covered, the internal temperature could rise and cause a
fire. Do not place the projector in locations subject to high temperatures, such as near heating
equipment. Do not operate the projector on a sofa, rug, or other soft surface, or set it on top of loose
papers. Do not cover the projector with a blanket, curtain, or tablecloth. If you are setting up the
projector near a wall, leave at least 19.7 inches (50 cm) of space between the wall and the projector.
• Do not operate the projector in a closed-in cabinet unless proper ventilation is provided.
• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially
flammable objects, near the projector. Do not place any containers of liquid on top of the unit. Never
spill liquid of any kind into the projector.
• Do not insert or drop metal, flammable, or foreign objects into the projector's vents or openings nor
leave them nearby. Doing so may result in fire, electric shock, or burns.
• If you are using two or more projectors side-by-side, leave enough space between the projectors to
allow for proper ventilation.
• You may need to clean the air filter and vent. A clogged air filter or vent can block ventilation needed
to cool the projector. Do not use canned air, or the gases may leave a residue.
• Do not use or store the projector in locations where it will be subject to dust or dirt. Otherwise, the
quality of the projected image may decline, or the air filter may become clogged, resulting in a
malfunction or fire.
• Follow the maintenance schedule for this projector. If the interior of the projector has not been cleaned
for a long time, dust may build up, which could cause fire or electric shock. Replace your air filter
periodically and contact your dealer to clean the interior of the projector, as needed.
• Do not store the projector outdoors for an extended length of time.
291
• Except as specifically explained in this manual, do not attempt to service this product yourself. Refer
all servicing to qualified personnel. Opening or removing covers may expose you to dangerous
voltages and other hazards.
• Never open any covers on the projector except as specifically explained in this manual. Never attempt
to disassemble or modify the projector (including consumables). Refer all repairs to qualified service
personnel. Electrical voltages inside the projector can cause serious injury.
• Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the
following conditions: if it does not operate normally when you follow the operating instructions, or
exhibits a distinct change in performance; if smoke, strange odors, or strange noises come from the
projector; if the power cord or plug is damaged or frayed; if liquid or foreign objects get inside the
projector, or if it has been exposed to rain or water; if it has been dropped or the housing has been
damaged. Continuing to use the projector under these conditions may result in fire or electric shock.
• Do not touch the plug during an electrical storm. Otherwise, you may receive an electric shock.
• Unplug the projector when it will not be used for extended periods. The insulation may deteriorate,
which may result in fire.
• Do not use the projector where it may be exposed to rain, water, or excessive humidity.
• Do not use or store the projector where it may be exposed to smoke, steam, corrosive gases,
excessive dust, vibration, or shock. Doing so may result in malfunction, electric shock, and fire.
• Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it
can adversely affect the quality of the projected images.
• Do not use the projector where flammable or explosive gases may be present. The inside of the
projector can get very hot during use and the gases may ignite, resulting in a fire.
• Do not use or store the projector or remote control in a hot location, such as near a heater, in direct
sunlight, or in a closed vehicle. Thermal deformation or technical malfunction may occur, which may
result in a fire.
• Check the specifications for the power cable. Using an inappropriate power cable could result in fire or
electric shock. The power cable supplied with the projector is intended to comply with power supply
requirements for the country of purchase. If you use the projector in the country where it was
purchased, only use the power cable that came with the projector.
• If you use the projector in a country other than where you purchased it, use the correct power cord for
that country.
• Do not stand on the projector or place heavy objects on it. You may fall over, resulting in injury and
damage to the projector.
• Do not use the projector outside of the required temperature range below:
292
32 to 113 °F (0 to 45 °C) at an altitude of 7500 feet (2286 m) or less, or 32 to 104 °F (0 to 40 °C) at an
altitude of 7500 to 10000 feet (2286 to 3048 m)
When using multiple projectors at the same time:
32 to 104 °F (0 to 40 °C) at an altitude of 7500 feet (2286 m) or less, or 32 to 95 °F (0 to 35 °C) at an
altitude of 7500 to 10000 feet (2286 m to 3048 m)
Doing so may cause an unstable display and could lead to projector damage. Do not use or store the
projector where it may be exposed to sudden changes in temperature.
• Do not use or store the projector in places where it might be subjected to high and low extremes of
temperature.
• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or
in direct sunlight for long periods of time. Doing so may cause damage to the case.
• Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not
bring your hands or face close to the vents while projection is in progress. Do not bring your face close
to the projector while it is in use.
• Before you move the projector, make sure its power is turned off, the plug is disconnected from the
outlet, and all cables are disconnected. Fire or electric shock may result.
• Do not place the source of an open flame, such as a lit candle, on or near the projector.
• During projection, do not block the light from the projector with a book or other objects. If the light from
the projector is blocked, the area on which the light shines becomes hot which could cause it to melt,
burn, or start a fire. Also, the lens may get hot due to the reflected light which could cause the
projector to malfunction. To stop projection, use the A/V Mute function, or turn off the projector.
• Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or
pull it excessively. Keep the power cord away from hot electrical appliances. Do not use the power
cord if it is damaged. Fire or electric shock may result. Contact your dealer if the cable becomes
damaged.
• Always lower the volume before turning off the projector. Turning on the projector with the volume too
high can damage your ears.
• When a still image is displayed for a long time, image retention may occur on the screen. Do not
display images in the exact same position for long periods.
• Always attach the lens cover to the lens when not using the projector to prevent the lens from
becoming dirty or damaged.
• Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in
fire, injury, or corrosion. When replacing batteries, take the following precautions: insert batteries so
that the polarities are correct; do not use batteries of different types or mix old and new batteries; do
293
not use any batteries other than those specified; if batteries leak, wipe away battery fluid with a soft
cloth; if battery fluid gets on your hands, wash them immediately; replace the batteries as soon as they
run out; remove the batteries if you will not be using the projector for a long period of time; do not
expose batteries to heat or flame and do not put them in water; dispose of used batteries according to
local regulations; keep batteries out of the reach of children. Batteries are choking hazards and are
very dangerous if swallowed.
Restriction of Use
Parent topic: Notices
Restriction of Use
When this product is used for applications requiring high reliability/safety such as transportation devices
related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or
functional/precision devices, you should use this product only after giving consideration to including fail-
safes and redundancies into your design to maintain safety and total system reliability.
Because this product was not intended for use in applications requiring extremely high reliability/safety
such as aerospace equipment, main communication equipment, nuclear power control equipment, or
medical equipment related to direct medical care, please make your own judgment on this product's
suitability after a full evaluation.
Parent topic: Important Safety Instructions
List of Safety Symbols (corresponding to IEC60950-1 A2)
The following table lists the meaning of the safety symbols labeled on the equipment.
No. Symbol Approved Standards Description
1 IEC60417
No.5007
"ON" (power)
To indicate connection to the mains.
2 IEC60417
No.5008
"OFF" (power)
To indicate disconnection from the
mains.
294
No. Symbol Approved Standards Description
3 IEC60417
No.5009
Stand-by
To identify the switch or switch position
by means of which part of the equipment
is switched on in order to bring it into the
stand-by condition.
4 ISO7000
No.0434B,
IEC3864-B3.1
Caution
To identify general caution when using
the product.
5 IEC60417
No.5041
Caution, hot surface
To indicate that the marked item can be
hot and should not be touched without
taking care.
6 IEC60417
No.6042
ISO3864-B3.6
Caution, risk of electric shock
To identify equipment that has risk of
electric shock.
7 IEC60417
No.5957
For indoor use only
To identify electrical equipment designed
primarily for indoor use.
8 IEC60417
No.5926
Polarity of DC power connector
To identify the positive and negative
connections (the polarity) on a piece of
equipment to which a DC power supply
may be connected.
9 — Polarity of DC power connector
To identify the positive and negative
connections (the polarity) on a piece of
equipment to which a DC. power supply
may be connected.
295
No. Symbol Approved Standards Description
10 IEC60417
No.5001B
Battery, general
On battery powered equipment. To
identify a device for instance a cover for
the battery compartment, or the
connector terminals.
11 IEC60417
No.5002
Positioning of cell
To identify the battery holder itself and to
identify the positioning of the cell(s)
inside the battery holder.
12 — Positioning of cell
To identify the battery holder itself and to
identify the positioning of the cell(s)
inside the battery holder.
13 IEC60417
No.5019
Protective earth
To identify any terminal which is intended
for connection to an external conductor
for protection against electric shock in
case of a fault, or the terminal of a
protective earth electrode.
14 IEC60417
No.5017
Earth
To identify an earth (ground) terminal in
cases where neither the symbol No.13 is
explicitly required.
15 IEC60417
No.5032
Alternating current
To indicate on the rating plate that the
equipment is suitable for alternating
current only; to identify relevant
terminals.
16 IEC60417
No.5031
Direct current
To indicate on the rating plate that the
equipment is suitable for direct current
only; to identify relevant terminals.
296
No. Symbol Approved Standards Description
17 IEC60417
No.5172
Class II equipment
To identify equipment meeting the safety
requirements specified for Class II
equipment according to IEC 61140.
18 ISO 3864 General prohibition
To identify actions or operations that are
prohibited.
19 ISO 3864 Contact prohibition
To indicate injury that could occur due to
touching a specific part of the equipment.
20 — Never look into the optical lens while the
projector is on.
21 — To indicate that the marked item don’t
place anything on projector.
22 ISO3864
IEC60825-1
Caution, laser radiation
To indicate the equipment has a laser
radiation part.
23 ISO 3864 Disassembly prohibition
To indicate a risk of injury, such as
electric shock, if the equipment is
disassembled.
24 IEC60417
No. 5266
Standby, partial standby
To indicate that part of the equipment is
in the ready status.
297
No. Symbol Approved Standards Description
25 ISO3864
IEC60417
No. 5057
Caution, movable parts
To indicate that you must keep away
from movable parts according to
protection standards.
27 IEC 60417-6056 Caution (movable fan blades)
To indicate that you must keep away
from the blades of the movable fan
according to protection standards.
28 IEC 60417-6043 Caution (sharp corners)
To indicate that you must not touch the
sharp corners of the product according to
protection standards.
29 — Never look into the projection lens while
the projector is on.
30 ISO7010
No. W027
Warning, light emission (UV, visible light,
IR and so on)
To indicate that you must be careful not
to injure your eyes or skin when near light
emitting sections.
31 IEC60417
No. 5109
Not to be used in residential areas
To indicate that the electrical
equipment/device is not suitable for use
in residential area.
Parent topic: Notices
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
298
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause interference to radio and television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
WARNING
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC
Certification or Declaration of this device and may cause interference levels which exceed the limits
established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded
equipment interface cable with this device. If this equipment has more than one interface connector, do
not leave cables connected to unused interfaces. Changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the equipment.
For Canadian Users
CAN ICES-3(B)/NMB-3(B)
Parent topic: Notices
Binding Arbitration and Class Waiver
1. DISPUTES, BINDING INDIVIDUAL ARBITRATION, AND WAIVER OF CLASS ACTIONS AND
CLASS ARBITRATIONS
1.1 Disputes. The terms of this Section 1 shall apply to all Disputes between you and Epson. The term
"Dispute" is meant to have the broadest meaning permissible under law and includes any dispute, claim,
controversy or action between you and Epson arising out of or relating to this Agreement, Epson
branded products (hardware and including any related software), or other transaction involving you and
Epson, whether in contract, warranty, misrepresentation, fraud, tort, intentional tort, statute, regulation,
ordinance, or any other legal or equitable basis. "DISPUTE" DOES NOT INCLUDE IP CLAIMS, or more
specifically, a claim or cause of action for (a) trademark infringement or dilution, (b) patent infringement,
(c) copyright infringement or misuse, or (d) trade secret misappropriation (an "IP Claim"). You and Epson
299
also agree, notwithstanding Section 1.6,that a court, not an arbitrator, may decide if a claim or cause of
action is for an IP Claim.
1.2 Binding Arbitration. You and Epson agree that all Disputes shall be resolved by binding arbitration
according to this Agreement. ARBITRATION MEANS THAT YOU WAIVE YOUR RIGHT TO A JUDGE
OR JURY IN A COURT PROCEEDING AND YOUR GROUNDS FOR APPEAL ARE LIMITED.
Pursuant to this Agreement, binding arbitration shall be administered by JAMS, a nationally recognized
arbitration authority, pursuant to its code of procedures then in effect for consumer related disputes, but
excluding any rules that permit joinder or class actions in arbitration (for more detail on procedure, see
Section 1.6 below). You and Epson understand and agree that (a) the Federal Arbitration Act (9 U.S.C.
§1, et seq.) governs the interpretation and enforcement of this Section 1, (b) this Agreement
memorializes a transaction in interstate commerce, and (c) this Section 1 shall survive termination of this
Agreement.
1.3 Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you and Epson agree to
try, for sixty (60) days, to resolve any Dispute informally. If Epson and you do not reach an agreement to
resolve the Dispute within the sixty (60) days), you or Epson may commence an arbitration. Notice to
Epson must be addressed to: Epson America, Inc., ATTN: Legal Department, 3131 Katella Ave., Los
Alamitos, CA 90720 (the "Epson Address"). The Dispute Notice to you will be sent to the most recent
address Epson has in its records for you. For this reason, it is important to notify us if your address
changes by emailing us at EAILegal@ea.epson.com or writing us at the Epson Address above. Notice of
the Dispute shall include the sender's name, address and contact information, the facts giving rise to the
Dispute, and the relief requested (the "Dispute Notice"). Following receipt of the Dispute Notice, Epson
and you agree to act in good faith to resolve the Dispute before commencing arbitration.
1.4 Small Claims Court. Notwithstanding the foregoing, you may bring an individual action in the small
claims court of your state or municipality if the action is within that court's jurisdiction and is pending only
in that court.
1.5 WAIVER OF CLASS ACTIONS AND CLASS ARBITRATIONS. YOU AND EPSON AGREE THAT
EACH PARTY MAY BRING DISPUTES AGAINST THE OTHER PARTY ONLY IN AN INDIVIDUAL
CAPACITY, AND NOT AS A PLAINTIFF OR CLASS MEMBER IN ANY CLASS OR
REPRESENTATIVE PROCEEDING, INCLUDING WITHOUT LIMITATION FEDERAL OR STATE
CLASS ACTIONS, OR CLASS ARBITRATIONS. CLASS ACTION LAWSUITS, CLASS-WIDE
ARBITRATIONS, PRIVATE ATTORNEY-GENERAL ACTIONS, AND ANY OTHER PROCEEDING
WHERE SOMEONE ACTS IN A REPRESENTATIVE CAPACITY ARE NOT ALLOWED.
ACCORDINGLY, UNDER THE ARBITRATION PROCEDURES OUTLINED IN THIS SECTION, AN
ARBITRATOR SHALL NOT COMBINE OR CONSOLIDATE MORE THAN ONE PARTY'S CLAIMS
WITHOUT THE WRITTEN CONSENT OF ALL AFFECTED PARTIES TO AN ARBITRATION
PROCEEDING.
1.6 Arbitration Procedure. If you or Epson commences arbitration, the arbitration shall be governed by
the rules of JAMS that are in effect when the arbitration is filed, excluding any rules that permit arbitration
on a class or representative basis (the "JAMS Rules"), available at http://www.jamsadr.com or by calling
300
1-800-352-5267 (U.S. or Canada), or https://www.jamsadr.com/about/ or by calling +1-949-224-1810
(Latin America), and under the rules set forth in this Agreement. All Disputes shall be resolved by a
single neutral arbitrator, and both parties shall have a reasonable opportunity to participate in the
selection of the arbitrator. The arbitrator is bound by the terms of this Agreement. The arbitrator, and not
any federal, state or local court or agency, shall have exclusive authority to resolve all disputes arising
out of or relating to the interpretation, applicability, enforceability or formation of this Agreement,
including any claim that all or any part of this Agreement is void or voidable. Notwithstanding this broad
delegation of authority to the arbitrator, a court may determine the limited question of whether a claim or
cause of action is for an IP Claim, which is excluded from the definition of "Disputes" in Section 1.1
above. The arbitrator shall be empowered to grant whatever relief would be available in a court under
law or in equity. The arbitrator may award you the same damages as a court could, and may award
declaratory or injunctive relief only in favor of the individual party seeking relief and only to the extent
necessary to provide relief warranted by that party's individual claim. In some instances, the costs of
arbitration can exceed the costs of litigation and the right to discovery may be more limited in arbitration
than in court. The arbitrator's award is binding and may be entered as a judgment in any court of
competent jurisdiction.
You may choose to engage in arbitration hearings by telephone. Arbitration hearings not conducted by
telephone shall take place in a location reasonably accessible from your primary residence, or in Orange
County, California, at your option.
a) Initiation of Arbitration Proceeding. If either you or Epson decides to arbitrate a Dispute, both parties
agree to the following procedure:
(i) Write a Demand for Arbitration. The demand must include a description of the Dispute and the amount
of damages sought to be recovered. You can find a copy of a Demand for Arbitration at
http://www.jamsadr.com ("Demand for Arbitration").
(ii) Send three copies of the Demand for Arbitration, plus the appropriate filing fee, to: JAMS, 500 North
State College Blvd., Suite 600 Orange, CA 92868, U.S.A.
(iii) Send one copy of the Demand for Arbitration to the other party (same address as the Dispute
Notice), or as otherwise agreed by the parties.
b) Hearing Format. During the arbitration, the amount of any settlement offer made shall not be disclosed
to the arbitrator until after the arbitrator determines the amount, if any, to which you or Epson is entitled.
The discovery or exchange of non-privileged information relevant to the Dispute may be allowed during
the arbitration.
c) Arbitration Fees. Epson shall pay, or (if applicable) reimburse you for, all JAMS filings and arbitrator
fees for any arbitration commenced (by you or Epson) pursuant to provisions of this Agreement.
d) Award in Your Favor. For Disputes in which you or Epson seeks $75,000 or less in damages exclusive
of attorney's fees and costs, if the arbitrator's decision results in an award to you in an amount greater
than Epson's last written offer, if any, to settle the Dispute, Epson will: (i) pay you $1,000 or the amount
301
of the award, whichever is greater; (ii) pay you twice the amount of your reasonable attorney's fees, if
any; and (iii) reimburse you for any expenses (including expert witness fees and costs) that your attorney
reasonably accrues for investigating, preparing, and pursuing the Dispute in arbitration. Except as
agreed upon by you and Epson in writing, the arbitrator shall determine the amount of fees, costs, and
expenses to be paid by Epson pursuant to this Section 1.6d).
e) Attorney's Fees. Epson will not seek its attorney's fees and expenses for any arbitration commenced
involving a Dispute under this Agreement. Your right to attorney's fees and expenses under Section
1.6d) above does not limit your rights to attorney's fees and expenses under applicable law;
notwithstanding the foregoing, the arbitrator may not award duplicative awards of attorney's fees and
expenses.
1.7 Opt-out. You may elect to opt-out (exclude yourself) from the final, binding, individual
arbitration procedure and waiver of class and representative proceedings specified in this
Agreement by sending a written letter to the Epson Address within thirty (30) days of your assent
to this Agreement (including without limitation the purchase, download, installation of the
Software or other applicable use of Epson Hardware, products and services) that specifies (i)
your name, (ii) your mailing address, and (iii) your request to be excluded from the final, binding
individual arbitration procedure and waiver of class and representative proceedings specified in
this Section 1. In the event that you opt-out consistent with the procedure set forth above, all
other terms shall continue to apply, including the requirement to provide notice prior to litigation.
1.8 Amendments to Section 1. Notwithstanding any provision in this Agreement to the contrary, you
and Epson agree that if Epson makes any future amendments to the dispute resolution procedure and
class action waiver provisions (other than a change to Epson's address) in this Agreement, Epson will
obtain your affirmative assent to the applicable amendment. If you do not affirmatively assent to the
applicable amendment, you are agreeing that you will arbitrate any Dispute between the parties in
accordance with the language of this Section 1 (or resolve disputes as provided for in Section 1.7, if you
timely elected to opt-out when you first assented to this Agreement).
1.9 Severability. If any provision in this Section 1 is found to be unenforceable, that provision shall be
severed with the remainder of this Agreement remaining in full force and effect. The foregoing shall not
apply to the prohibition against class or representative actions as provided in Section 1.5. This
means that if Section 1.5 is found to be unenforceable, the entire Section 1 (but only Section 1)
shall be null and void.
Parent topic: Notices
Trademarks (U.S. and Canada)
EPSON®, PowerLite®, and Quick Corner®are registered trademarks, Epson iProjection is a trademark,
and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
302
PrivateLine®is a registered trademark; SizeWiseTM is a trademark; and Epson StoreSM is a service mark
of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac, macOS, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Google®is a registered trademark and AndroidTM , ChromebookTM , Google ChromeTM , and Google
PlayTM are trademarks of Google LLC.
HDBaseTTM and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Miracast®is a registered trademark of Wi-Fi Alliance®.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
Parent topic: Notices
Trademarks (Latin America)
EPSON®, PowerLite®, and Quick Corner®are registered trademarks, Epson iProjection is a trademark,
and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
SizeWiseTM is a trademark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac, macOS, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Google®is a registered trademark and AndroidTM , ChromebookTM , Google ChromeTM , and Google
PlayTM are trademarks of Google LLC.
HDBaseTTM and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Miracast®is a registered trademark of Wi-Fi Alliance®.
303
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
Parent topic: Notices
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Seiko Epson Corporation. The information contained herein is
designed only for use with this Epson product. Epson is not responsible for any use of this information as
applied to other products.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of:
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this
product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and
maintenance instructions.
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any
options or any consumable products other than those designated as Original Epson Products or Epson
Approved Products by Seiko Epson Corporation.
This information is subject to change without notice.
A Note Concerning Responsible Use of Copyrighted Materials
Copyright Attribution
Parent topic: Notices
A Note Concerning Responsible Use of Copyrighted Materials
Epson encourages each user to be responsible and respectful of the copyright laws when using any
Epson product. While some countries' laws permit limited copying or reuse of copyrighted material in
certain circumstances, those circumstances may not be as broad as some people assume. Contact your
legal advisor for any questions regarding copyright law.
Parent topic: Copyright Notice
