Table of Contents
- Notations Used in This Guide
- Contents
- Introduction
- Preparing the Projector
- Basic Usage
- Projecting Images
- Adjusting Projected Images
- Correcting Keystone Distortion
- Adjusting the Image Size
- Adjusting the Position of the Image (Image Shift)
- Adjusting the Vertical Position of the Image (Models Supplied with the Feet only)
- Adjusting the Horizontal Position of the Image (Models Supplied with the Feet only)
- Correcting the Focus
- Adjusting the Volume
- Selecting the Projection Quality (Selecting Color Mode)
- Setting Auto Iris
- Changing the Aspect Ratio of the Projected Image
- Using the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only)
- Interactive Feature Modes
- Using the Interactive Pens
- Using Your Finger for Interactive Touch Operations (EB-595Wi only)
- Interacting with the Screen
- Using the Interactive Features over a Network
- Windows Pen Input and Ink Tools
- Useful Functions
- Projection Functions
- Projecting Images Stored on a USB Storage Device (PC Free)
- Hiding the Image and Sound Temporarily (A/V Mute)
- Freezing the Image (Freeze)
- Pointer Function (Pointer)
- Enlarging Part of the Image (E-Zoom)
- Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)
- Saving a User's Logo
- Saving User Pattern
- Security Functions
- Monitoring and Controlling
- Projection Functions
- Configuration Menu
- Troubleshooting
- Using the Help
- Problem Solving
- Reading the Indicators
- When the Indicators Provide No Help
- Problems Relating to Images
- No Images Appear
- Moving Images Are Not Displayed (only the Moving Image Portion Turns Black)
- Projection Stops Automatically
- The Message Not supported Is Displayed
- The Message No Signal Is Displayed
- Images Are Fuzzy, Out of Focus, or Distorted
- Interference or Distortion Appear in Images
- The Mouse Cursor Flickers (only when Projecting USB Display)
- The Image Is Truncated (Large) or Small, or the Aspect Is Not Suitable
- Image Colors Are Not Right
- Images Appear Dark
- Problems when Projection Starts
- Problems with the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only)
- Cannot Draw on the Projected Screen
- Cannot Operate a Computer from the Projected Screen after Connecting to the Computer
- The Message An error occurred in the Easy Interactive Function. Is Displayed
- Computer's Mouse Does Not Work Correctly
- The Interactive Pen Does Not Work
- The Response Time for the Interactive Pen Is Slow (only when Projecting USB Display)
- Cannot Perform Touch Operations Correctly (EB-595Wi only)
- Cannnot Adjust the Angle of Touch Unit (EB-595Wi only)
- The Dot Moves Automatically or Does Not Move to the Next Position during Calibrating Manually
- Other Problems
- No Sound Can Be Heard or the Sound Is Faint
- No Sound Can Be Heard from the Microphone
- There Is Noise in the Audio (only when Projecting USB Display)
- The Remote Control Does Not Work
- I Want to Change the Language for Messages and Menus
- Mail Is Not Received even if an Error Occurs with the Projector
- Cannot Change Settings Using a Web Browser
- About Event ID
- Maintenance
- Appendix
Epson EB-585WS User Manual
Displayed below is the user manual for EB-585WS by Epson which is a product in the Data Projectors category. This manual has pages.
Related Manuals
User’s Guide
Notations Used in This Guide
•Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
The indications and their meaning are as follows. Make sure you understand them properly before reading the guide.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
•General information indications
Attention
Indicates procedures which may result in damage or injury if sufficient care is not taken.
a
Indicates additional information and points which may be useful to know regarding a topic.
sIndicates a page where detailed information regarding a topic can be found.
g
Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary"
section of the "Appendix".
s "Glossary" p.198
[Name] Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
Menu Name Indicates Configuration menu items.
Example:
Select Brightness from Image.
Image - Brightness
Notations Used in This Guide ........................ 2
Introduction
Projector Features .......................................... 8
Interactive Features (Easy Interactive Function) (EB-595Wi/EB-585Wi/EB-575Wi only)
...........................................................8
Enabling Projection from a Short Distance.............................8
Connecting to a Network and Projecting Images from the Computer's Screen . . . . . 8
Enhanced Security Functions......................................9
Enlarge and Project Your Files with the Document Camera..................9
Part Names and Functions .................................. 11
Front/Side ..................................................11
Top/Side ...................................................12
Interface...................................................13
Base......................................................14
Attaching the Feet (only Models with Feet Supplied)...................15
Control Panel................................................16
Remote Control ...............................................17
Replacing the Remote Control Batteries............................19
Remote Control Operating Range ................................20
Interactive Pen (EB-595Wi/EB-585Wi/EB-575Wi only) . . . . . . ...............20
Replacing the Battery for the Interactive Pen ......................... 21
Replacing the Tip of the Interactive Pen............................22
Pen Tray (EB-595Wi/EB-585Wi/EB-575Wi only) ..........................23
Touch Unit (EB-595Wi only).......................................23
Front ....................................................23
Rear.....................................................24
Preparing the Projector
Installing the Projector ..................................... 26
Installation Methods...........................................26
When Using the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only) . ....27
Setting up the Touch Unit (EB-595Wi only)..........................28
Connecting Equipment ..................................... 29
Connecting a Computer .........................................29
Connecting a Smartphone or Tablet Device ............................31
Connecting Image Sources.......................................32
Connecting USB Devices.........................................35
Connecting a Microphone.......................................37
Connecting External Equipment...................................38
Connecting a LAN Cable ......................................... 40
Installing the Optional Wireless LAN Unit.............................41
Connecting Multiple Projectors (EB-595Wi/EB-585Wi/EB-575Wi only) . . . . . . . . . . 42
Basic Usage
Projecting Images ......................................... 45
Getting Ready to Project .........................................45
Automatically Detect Input Signals and Change the Projected Image (Source Search)
..........................................................46
Switching to the Target Image Using the Remote Control..................47
Projecting with USB Display......................................48
System Requirements........................................48
Connecting for the First Time...................................49
Uninstalling ...............................................50
Adjusting Projected Images ................................ 52
Correcting Keystone Distortion ....................................52
H/V-Keystone..............................................52
Quick Corner...............................................53
Adjusting the Image Size ........................................55
Adjusting the Position of the Image (Image Shift) ........................ 55
Adjusting the Vertical Position of the Image (Models Supplied with the Feet only)
..........................................................56
Raising the Height of the Image..................................56
Lowering the Height of the Image................................56
Adjusting the Horizontal Position of the Image (Models Supplied with the Feet only)
..........................................................56
Correcting the Focus...........................................57
Contents
3
Adjusting the Volume..........................................59
Selecting the Projection Quality (Selecting Color Mode)...................60
Setting Auto Iris..............................................60
Changing the Aspect Ratio of the Projected Image.......................61
Changing Methods..........................................61
Changing the Aspect Mode (EB-595Wi/EB-585Wi/EB-585W/EB-575Wi/EB-575W
only) ....................................................61
Changing the Aspect Mode (EB-580/EB-570 only)...................... 63
Using the Interactive Features
(EB-595Wi/EB-585Wi/EB-575Wi only)
Interactive Feature Modes .................................. 65
Drawing on a Projected Image (Annotation Mode).......................66
Using the Projected Screen as a Whiteboard (Whiteboard Mode).............67
Controlling Computer Features from a Projected Screen (Computer Interactive
Mode) .....................................................68
Computer Interactive Mode System Requirements .....................68
Using Computer Interactive Mode ................................68
Easy Interactive Driver System Requirements (OS X only).................71
Installing Easy Interactive Driver on OS X ............................72
Using the Interactive Pens .................................. 73
Pen Calibration ...............................................74
Calibrating Automatically...................................... 75
Calibrating Manually .........................................76
Adjusting the Pen Operation Area..................................78
Using Your Finger for Interactive Touch Operations (EB-595Wi
only) ..................................................... 80
Safety Instructions for Interactive Touch Operations......................80
Laser Warning Labels .........................................80
Using Interactive Touch Operations with Your Finger.....................81
Calibrating for Touch Operations with Your Finger .......................82
Interacting with the Screen ................................. 86
Switching the Interactive Mode ....................................86
Annotation Mode and Whiteboard Mode Toolbars .......................87
Selecting Line Width and Color.................................. 88
Selecting Whiteboard Templates .................................89
Projector Control Toolbar........................................89
Selecting Network Device Display from the Projector Control Toolbar........90
Using the Interactive Features over a Network ............... 92
Precautions When Connecting to a Projector on a Different Subnet...........92
Windows Pen Input and Ink Tools ........................... 94
Enabling Windows Pen Input and Ink Features..........................94
Using Windows Pen Input and Ink Features............................95
Useful Functions
Projection Functions ....................................... 97
Projecting Images Stored on a USB Storage Device (PC Free)................97
Specifications for Files that Can Be Projected Using PC Free...............97
PC Free Examples ...........................................97
PC Free Operating Methods....................................98
Projecting the Selected Images or Movies ...........................99
Projecting Image Files in a Folder in Sequence (Slideshow).............. 100
Image File Display Settings and Slideshow Operation Settings............ 101
Hiding the Image and Sound Temporarily (A/V Mute).................... 102
Freezing the Image (Freeze)..................................... 102
Pointer Function (Pointer) ....................................... 103
Enlarging Part of the Image (E-Zoom)............................... 103
Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)......104
Saving a User's Logo ........................................... 106
Saving User Pattern ........................................... 108
Security Functions ........................................ 110
Managing Users (Password Protection).............................. 110
Kinds of Password Protection .................................. 110
Setting Password Protection ................................... 110
Entering the Password ....................................... 111
Restricting Operation (Control Panel Lock)........................... 112
Contents
4
Anti-Theft Lock .............................................. 113
Installing the Wire Lock .......................................113
Monitoring and Controlling ............................... 114
About EasyMP Monitor ......................................... 114
Message Broadcasting....................................... 114
Changing Settings Using a Web Browser (Web Control)................... 114
Projector Setup ............................................ 114
Displaying the Web Control Screen.............................. 115
Displaying the Web Remote Screen.............................. 115
Using the Mail Notification Function to Report Problems..................116
Reading Error Notification Mail................................. 117
Management Using SNMP...................................... 117
ESC/VP21 Commands..........................................118
Command List .............................................118
Cable Layouts............................................. 118
About PJLink ................................................119
About Crestron RoomView
®
..................................... 120
Operating a Projector from Your Computer......................... 120
Configuration Menu
Using the Configuration Menu ............................. 125
List of Functions .......................................... 126
Configuration Menu Table...................................... 126
Network Menu............................................ 127
Image Menu ................................................ 128
Signal Menu ................................................ 129
Settings Menu...............................................131
Extended Menu ..............................................132
Easy Interactive Function Setting Items............................ 135
Network Menu.............................................. 136
Notes on Operating the Network Menu ............................137
Soft Keyboard Operations ..................................... 137
Basic Menu............................................... 138
Wireless LAN Menu ......................................... 139
Security Menu.............................................140
Wired LAN Menu ........................................... 141
Mail Menu............................................... 142
Others Menu..............................................143
Reset Menu ...............................................144
ECO Menu................................................. 144
Info Menu (Display only)........................................ 145
Reset Menu .................................................146
Performing Batch Setup for Multiple Projectors ............. 147
Troubleshooting
Using the Help ........................................... 149
Problem Solving .......................................... 150
Reading the Indicators......................................... 150
When the Indicators Provide No Help ............................... 154
Problems Relating to Images .....................................155
No Images Appear.......................................... 155
Moving Images Are Not Displayed (only the Moving Image Portion Turns Black)
........................................................156
Projection Stops Automatically ................................. 156
The Message Not supported Is Displayed.......................... 156
The Message No Signal Is Displayed .............................. 157
Images Are Fuzzy, Out of Focus, or Distorted........................ 157
Interference or Distortion Appear in Images.........................158
The Mouse Cursor Flickers (only when Projecting USB Display)............159
The Image Is Truncated (Large) or Small, or the Aspect Is Not Suitable . . . . . . . 159
Image Colors Are Not Right....................................160
Images Appear Dark .........................................160
Problems when Projection Starts.................................. 161
The Projector Does Not Turn on................................. 161
Problems with the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only) . . . . 161
Cannot Draw on the Projected Screen .............................161
Cannot Operate a Computer from the Projected Screen after Connecting to the
Computer ................................................162
Contents
5
The Message An error occurred in the Easy Interactive Function. Is Displayed
........................................................162
Computer's Mouse Does Not Work Correctly........................ 163
The Interactive Pen Does Not Work ...............................163
The Response Time for the Interactive Pen Is Slow (only when Projecting USB
Display) ................................................. 164
Cannot Perform Touch Operations Correctly (EB-595Wi only).............164
Cannnot Adjust the Angle of Touch Unit (EB-595Wi only) . ...............165
The Dot Moves Automatically or Does Not Move to the Next Position during
Calibrating Manually ........................................ 165
Other Problems ..............................................165
No Sound Can Be Heard or the Sound Is Faint....................... 165
No Sound Can Be Heard from the Microphone.......................166
There Is Noise in the Audio (only when Projecting USB Display) . . . . . . . . . . . 166
The Remote Control Does Not Work .............................. 167
I Want to Change the Language for Messages and Menus............... 167
Mail Is Not Received even if an Error Occurs with the Projector ............ 167
Cannot Change Settings Using a Web Browser ....................... 168
About Event ID ........................................... 169
Maintenance
Cleaning ................................................. 171
Cleaning the Projector's Surface...................................171
Cleaning the Projection Window .................................. 171
Cleaning the Obstacle Sensor.................................... 171
Cleaning the Air Filter ..........................................172
Replacing Consumables ................................... 175
Replacing the Lamp ........................................... 175
Lamp Replacement Period.................................... 175
How to Replace the Lamp ..................................... 176
Resetting the Lamp Hours .....................................179
Replacing the Air Filter ......................................... 179
Air Filter Replacement Period.................................. 179
How to Replace the Air Filter ................................... 179
Appendix
Optional Accessories and Consumables .................... 184
Optional Accessories .......................................... 184
Consumables ............................................... 184
Screen Size and Projection Distance ........................ 185
Projection Distance (for EB-595Wi/EB-585Wi/EB-585W/EB-575Wi/EB-575W) . . . . . 185
Projection Distance (for EB-580/EB-570) . . ........................... 186
Supported Monitor Displays ............................... 188
Supported Resolutions......................................... 188
Computer Signals (Analog RGB).................................188
Component Video .......................................... 188
Composite Video...........................................188
HDMI Input Signal .......................................... 188
MHL Input Signal ........................................... 189
Specifications ............................................ 190
Projector General Specifications...................................190
Appearance .............................................. 196
Glossary ................................................. 198
General Notes ............................................ 200
Wireless Telegraphy Act Regulations ............................... 200
About Notations ............................................. 200
General Notice:.............................................. 201
Contents
6
Introduction
This chapter explains the projector's features and the part names.
Interactive Features (Easy Interactive Function)
(EB-595Wi/EB-585Wi/EB-575Wi only)
You can perform the following operations with the interactive pen.
•Use the projected screen as a whiteboard
•Draw on content projected from a computer
•Operate a computer from the projected screen
•Operate the projector from the projected screen
•Select devices on the projected screen that have been connected to the
network using the supplied EasyMP Multi PC Projection
•Use the interactive features over a network using the supplied EasyMP
Network Projection or the optional Quick Wireless
When the Touch Unit is installed, you can use your finger to interact with
the projected screen instead of the interactive pen (EB-595Wi only).
s "Using the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only)"
p.64
Enabling Projection from a Short Distance
You can project large images from a short distance without having to move
the projector away from the screen. By mounting the projector on a ceiling
or wall, you can minimize shadows cast on the screen even when you are
standing near it and avoid being dazzled by the projected light.
s "Screen Size and Projection Distance" p.185
Connecting to a Network and Projecting Images
from the Computer's Screen
You can perform the following operations using EasyMP Network
Projection and EasyMP Multi PC Projection found on the supplied EPSON
Projector Software CD-ROM.
•Sharing the projector over a network
By using EasyMP Network Projection, you
can connect the projector to a network and
share it with multiple computers. This allows
you to project images and documents from
any of the computers without changing
cables. You can also project from one
computer to multiple projectors.
s EasyMP Network Projection Operation
Guide
Projector Features
8
•Projecting multiple computer screens at the same time
By using EasyMP Multi PC Projection, you
can project up to four screens at the same time
from a computer on the network, or from
smartphones or tablet devices on which Epson
iProjection is installed.
s EasyMP Multi PC Projection Operation
Guide
You can perform the following operations using optional products and
applications.
•Wirelessly projecting your computer's screen
By installing the optional wireless LAN unit,
you can project a computer screen over a
network.
s "Installing the Optional Wireless LAN
Unit" p.41
•Connecting to a computer with Quick Wireless easily
By simply connecting the optional Quick
Wireless Connection USB Key to a computer,
you can automatically perform network
settings for a wireless LAN connection, and
project the computer's screen.
•Projecting images from portable devices over a network
If Epson iProjection is installed on your
smartphone or tablet device, you can
wirelessly project data from the device. You
can download Epson iProjection for free from
the App Store or from Google play. Any fees
incurred when communicating with the App
Store or Google play are the responsibility of
the customer.
Enhanced Security Functions
•Password Protect to restrict and manage users
By setting a password you can restrict who can use the projector.
s "Managing Users (Password Protection)" p.110
•Control Panel Lock restricts button operation on the control panel
You can use this to prevent people changing projector settings without
permission at events, in schools, and so on.
s "Restricting Operation (Control Panel Lock)" p.112
•Equipped with various anti-theft devices
The projector is equipped with the following types of anti-theft security
devices.
•Security slot
•Security cable installation point
s "Anti-Theft Lock" p.113
Enlarge and Project Your Files with the Document
Camera
You can project paper documents and objects using the optional Document
Camera. By connecting to a computer and using the software supplied, you
can make full use of the projector's capabilities.
Projector Features
9
Front/Side
Name Function
ARemote receiver Receives signals from the remote control.
BLamp cover Open when replacing the projector's lamp.
s "Replacing the Lamp" p.175
CLamp cover fixing
screw
Screw to fix the lamp cover in place.
s "Replacing the Lamp" p.175
Name Function
DAir exhaust vent Exhaust vent for air used to cool the projector internally.
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could
cause burns, warping, or accidents to occur.
ECable cover fixing
screws
Screws to fix the cable cover in place.
FCable cover Loosen the two screws and open the cover when
connecting cables for external devices or installing the
wireless LAN unit.
GControl panel Operates the projector.
s "Control Panel" p.16
HSpeaker Outputs audio.
Part Names and Functions
11
Top/Side
Name Function
AAir filter cover
open/close lever
Opens and closes the air filter cover.
BWireless LAN indicator Indicates the access status to the optional wireless LAN
unit.
Name Function
CEasy Interactive
Function receiver
(EB-595Wi/EB-585Wi/
EB-575Wi only)
Receives signals from the interactive pen.
s "Using the Interactive Features
(EB-595Wi/EB-585Wi/EB-575Wi only)" p.64
DObstacle sensor Detects obstacles that are interfering with the projection
area.
s "Cleaning the Obstacle Sensor" p.171
ERemote receiver Receives signals from the remote control.
FProjection window Projects images.
Warning
•Do not look into the projection window while
projecting.
•Do not place any objects or put your hand near
the projection window. It could cause burns,
fire, or the object to warp because this area rea‐
ches a high temperature due to the concentrated
projection light.
GSecurity slot The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s "Anti-Theft Lock" p.113
HAir filter cover Open when changing the air filter or operating the focus
lever.
IAir intake vent
(air filter)
Takes in air to cool the projector internally.
s "Cleaning the Air Filter" p.172
s "Replacing the Air Filter" p.179
JFocus lever Adjusts the image focus.
Open the air filter cover to operate.
Part Names and Functions
12
Interface
The following ports are available under the cable cover.
Name Function
AWireless LAN unit
installation section
Install the optional Wireless LAN unit.
s "Installing the Optional Wireless LAN Unit" p.41
BAudio1 port Inputs audio from equipment connected to the
Computer1 port.
CComputer1 port Inputs image signals from a computer and component
video signals from other video sources.
DAudio2 port •Inputs audio from equipment connected to the
Computer2 port.
•Inputs audio from other devices when projecting
images from the device connected to the USB-A port.
Name Function
EUSB-B port •Connects the projector to a computer via the supplied or
a commercially available USB cable, and projects the
images on the computer.
s "Projecting with USB Display" p.48
•Connects the projector to a computer via the supplied or
a commercially available USB cable to use the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.104
•Connects the projector to a computer via the supplied
USB cable to use the interactive pen as a mouse
(EB-595Wi/EB-585Wi/EB-575Wi only).
s "Controlling Computer Features from a
Projected Screen (Computer Interactive Mode)"
p.68
FLAN port Connects a LAN cable to connect to a network.
GMonitor Out/
Computer2 input
ports
•When Monitor Out Port is set to Monitor Out from the
Configuration menu, analog RGB signals input from
the Computer1 port are output to an external monitor.
You cannot output signals input from other ports or
component video signals.
•When Monitor Out Port is set to Computer2 from the
Configuration menu, image signals from a computer
and component video signals from other video sources
are input.
HHDMI2 port Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP
g
.
IS-Video port For S-video signals from video sources.
JHDMI1/MHL input
port
•Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP
g
.
•Inputs signals from smartphones and tablet devices that
support MHL
g
(Mobile High-definition Link).
Part Names and Functions
13
Name Function
KAudio port Inputs audio from equipment connected to the S-Video
port or the Video port.
LVideo port Inputs composite video signals from video sources.
MSYNC IN/OUT port
(EB-595Wi/EB-585Wi/
EB-575Wi only)
When using the interactive features in the same room as
multiple versions of the same projector, you need to
connect the optional remote control cable set (ELPKC28)
to the projectors. When the cable set is connected, the
interactive pen operates smoothly.
s "Connecting Multiple Projectors (EB-595Wi/
EB-585Wi/EB-575Wi only)" p.42
NPower inlet Connects the power cord to the projector.
s "Getting Ready to Project" p.45
OTCH port (EB-595Wi
only)
Connects the supplied Touch Unit connection cable to the
Touch Unit.
PUSB-A port •Connects a USB memory device or a digital camera, and
projects images in PC Free.
s "Projecting Images Stored on a USB Storage
Device (PC Free)" p.97
•Connects the optional Document Camera.
QRS-232C port When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s "ESC/VP21 Commands" p.118
RAudio Out port Outputs audio from the currently projected image or the
Mic port to an external speaker.
SMic port Inputs audio from the microphone.
s "Connecting a Microphone" p.37
Base
Name Function
ACeiling mount fixing
points (five points)
Attach the optional Ceiling mount here when suspending
the projector from a ceiling.
s "Installing the Projector" p.26
s "Optional Accessories" p.184
Part Names and Functions
14
Name Function
BSecurity cable
installation point
Pass a commercially available wire lock through here and
lock it in place.
Do not pass drop-prevention wires through here when
mounting the projector on a wall or suspending it from a
ceiling.
s "Installing the Wire Lock" p.113
CRear foot fixing points
(two points)
Attach the feet when using the projector on a surface such
as a desk. (Only models with feet supplied)
s "Attaching the Feet (only Models with Feet Supplied)"
p.15
DWall mount fixing
points (four points)
Attach the supplied or optional setting plate when
mounting on a wall.
s Installation Guide
s "Optional Accessories" p.184
EIllumination sensor Detects the brightness of the surroundings, and
automatically adjusts the brightness of the screen. Set
Brightness Control to Auto from the Configuration
menu.
s ECO - Brightness Control p.144
FFront foot fixing point Attach the foot with a spacer when using the projector on a
surface such as a desk. (Only models with feet supplied)
s "Attaching the Feet (only Models with Feet Supplied)"
p.15
Attaching the Feet (only Models with Feet Supplied)
Insert the feet into the foot fixing points.
AInsert the foot with the spacer into the front foot fixing point.
BInsert the rear feet (x2) into the foot fixing points.
Part Names and Functions
15
Control Panel
Name Function
AIndicators Indicates the projector's status using color, and by being lit
or flashing.
s "Reading the Indicators" p.150
B[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.46
C[Enter] button
[]
•When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
•If pressed while projecting analog RGB signals from
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Position.
Name Function
D[w][v] button •Performs keystone correction.
s "H/V-Keystone" p.52
•If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu" p.125
s "Using the Help" p.149
E[Help] button Displays and closes the help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.149
F[Esc] button •Stops the current function.
•If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s "Using the Configuration Menu" p.125
G[Tele]/[Wide] buttons •Adjusts the size of the projection screen. Press the [Tele]
button to reduce the size of the projection screen and
press the [Wide] button to increase the size of the
projection screen.
•Corrects keystone distortion in the horizontal direction
when the Keystone screen is displayed.
s "H/V-Keystone" p.52
•If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu" p.125
s "Using the Help" p.149
H[Menu] button Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.125
I[Power] button
[t]
Turns the projector power on or off.
s "Getting Ready to Project" p.45
Part Names and Functions
16
Remote Control Name Function
A[Power] button
[t]
Turns the projector power on or off.
s "Getting Ready to Project" p.45
B[Computer] button Each time you press the button, the input changes between
images from the Computer1 port and the Computer2
port.
C[Video] button Each time the button is pressed, the image cycles through
the S-Video, Video, HDMI1/MHL, and HDMI2 ports.
DNumeric buttons •Enter the Password.
s "Setting Password Protection" p.110
•Use this button to enter numbers in Network settings
from the Configuration menu.
E[Auto] button If pressed while projecting analog RGB signals from
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Position.
F[Aspect] button Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image"
p.61
G[Num] button Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protection" p.110
H[Menu] button Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.125
Part Names and Functions
17
Name Function
I[][ ][ ][ ]
button
•When the Configuration menu or Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s "Using the Configuration Menu" p.125
•When projecting in PC Free, pressing these buttons
displays the previous/next image, rotates the image, and
so on.
s "Projecting Images Stored on a USB Storage
Device (PC Free)" p.97
•During Wireless Mouse function, the mouse pointer
moves in the direction of the button that was pushed.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.104
J[Enter] button
[]
•When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
s "Using the Configuration Menu" p.125
•Acts as a mouse's left button when using the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.104
K[User] button Select any frequently used item from the Configuration
menu items, and assign it to this button. By pressing
the [User] button, the assigned menu item selection/
adjustment screen is displayed, allowing you to make one-
touch settings/adjustments.
s "Settings Menu" p.131
The following item is assigned by default.
•For EB-595Wi/EB-585Wi/EB-575Wi: Auto
Calibration
•For EB-585W/EB-580/EB-575W/EB-570: Power
Consumption
Name Function
L[Page] buttons
[[][]]
Changes pages in files such as PowerPoint files when using
the following projection methods.
•When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.104
•When using USB Display
s "Projecting with USB Display" p.48
•When connecting to a network
When projecting images using PC Free, pressing these
buttons displays the previous/next image file.
M[E-Zoom] buttons
[z][x]
Enlarges or reduces the image without changing the
projection size.
s "Enlarging Part of the Image (E-Zoom)" p.103
N[A/V Mute] button •Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.102
•You can change the Projection mode as follows by
pressing the button for about five seconds.
FrontWFront/Upside Down
RearWRear/Upside Down
OStrap attachment hole Allows you to attach a commercially available strap to the
remote control.
P[Help] button Displays and closes the help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.149
Q[Freeze] button Pauses or resumes image playback.
s "Freezing the Image (Freeze)" p.102
R[Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s "Adjusting the Volume" p.59
S[Pointer] button Displays the on-screen pointer.
s "Pointer Function (Pointer)" p.103
Part Names and Functions
18
Name Function
T[Esc] button •Stops the current function.
•If pressed when the Configuration menu is displayed, it
moves to the previous level.
s "Using the Configuration Menu" p.125
•Acts as a mouse's right button when using the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.104
U[Pen Mode] button Changes between operating the computer or drawing
using the interactive pen.
s "Using the Interactive Features
(EB-595Wi/EB-585Wi/EB-575Wi only)" p.64
V[Color Mode] button Each time the button is pressed, the color mode changes.
s "Selecting the Projection Quality (Selecting Color
Mode)" p.60
W[MHL Menu] button Displays the settings menu for the device linked to the
projector's MHL port.
X[LAN] button Switches to the image from the network connected device.
Y[USB] button Each time the button is pressed, it cycles through the
following images:
•USB Display
•Images from the device connected to the USB-A port
Z[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.46
aRemote control light-
emitting area
Outputs remote control signals.
Replacing the Remote Control Batteries
If the remote control becomes unresponsive or inoperable after it has been
used for some time, the batteries may have reached the end of their service
life. When this happens, replace them with new batteries. Obtain two AA
size manganese or alkaline batteries. You cannot use other batteries except
for the AA size manganese or alkaline.
Attention
Make sure you read the following manual before handling the batteries.
s Safety Instructions
a
Remove the battery cover.
While pushing the battery cover catch, lift the cover up.
b
Replace the old battery with a new battery.
Slide the batteries in negative side first.
Part Names and Functions
19
Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the battery is inserted the correct way.
If the batteries are not used correctly, they could explode or leak causing
a fire, injury, or damage to the product.
c
Reattach the battery cover.
Press the battery cover until it clicks into place.
Remote Control Operating Range
Interactive Pen (EB-595Wi/EB-585Wi/EB-575Wi
only)
There are two types of interactive pens with different colored bottom
sections. You cannot use interactive pens with the same colored bottom
sections at the same time.
s "Optional Accessories" p.184
Part Names and Functions
20
Name Function
APen tip •Turn on the interactive pen. When turned on, it takes
approximately one second before the interactive pen is
operational.
•Hold the pen close to the projected screen, and press to
use.
s "Using the Interactive Features
(EB-595Wi/EB-585Wi/EB-575Wi only)" p.64
s "Optional Accessories" p.184
BBattery light Press the button on the side of the pen to indicate the
remaining battery power.
•When the battery is charged, the light is lit green until
you release the button.
•When the battery is running low, the light flashes green
until you release the button.
•Does not light when the battery is exhausted. Change
the battery.
s "Replacing the Battery for the Interactive Pen" p.21
Name Function
CButton •Turn on the interactive pen. When turned on, it takes
approximately one second before the interactive pen is
operational.
•Press the button to switch the tip function between pen
and eraser while drawing.
•Press the button to perform a right-click operation
while using the pen as a mouse.
DAttachment for
optional strap or cord
Allows you to attach a commercially available strap.
EBattery cover Open this cover when replacing the battery.
s "Replacing the Battery for the Interactive Pen" p.21
a
The interactive pen turns off automatically after 20 minutes of
inactivity.
To use the pen again, tap the pen tip or press the button on the side
to turn on the power.
Replacing the Battery for the Interactive Pen
When you press the button, the battery light on the interactive pen lights or
flashes. Does not light or flash when the battery is exhausted. When the
light no longer lights or flashes, replace the battery. Use one of the
following types of battery. Other chargeable batteries cannot be used.
•AA size manganese battery
•AA size alkaline manganese battery
•eneloop
®
*
(HR-3UTG/HR-3UTGA/HR-3UTGB/BK-3MCC)
* eneloop
®
is a registered trademark of the Panasonic Group.
Attention
Make sure you read the following manual before handling batteries.
s Safety Instructions
Part Names and Functions
21
a
Remove the battery cover.
While pushing the battery cover catch, lift the cover up.
b
Replace the old battery with a new battery.
Slide the batteries in negative side first.
Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the battery is inserted the correct way.
If the batteries are not used correctly, they could explode or leak causing
a fire, injury, or damage to the product.
c
Replace the battery cover.
Press the battery cover until it clicks into place.
Replacing the Tip of the Interactive Pen
Replace the tip of the interactive pen when it is worn.
s "Optional Accessories" p.184
a
Turn the tip of the pen to remove it.
b
Turn the new tip to attach it.
Part Names and Functions
22
Pen Tray (EB-595Wi/EB-585Wi/EB-575Wi only)
Name Function
AFixing points Attach the pen tray to a whiteboard or wall.
BSecurity hole Pass a commercially available lock through here.
a
It is recommended that the pen tray be tightened with two
commercially available M5 bolts.
Touch Unit (EB-595Wi only)
Front
When the dial cover is not attached
Name Function
ADial cover Remove to use the adjustment dials.
BTCH port Connects the projector to the Touch Unit with the Touch
Unit connection cable.
CSecurity slot The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
DAdjustment dials Performs angle adjustments.
EIndicator Lit when the Touch Unit is turned on.
FScrew holes (for
installation)
The screw holes for securing the Touch Unit with M4
screws (only when installing on a non-magnetic surface).
Part Names and Functions
23
Rear
Name Function
ALaser diffusion port Diffuses laser light to detect the position of fingers.
BInstallation magnet Magnet used for installation.
CMarker Place the markers on the screen when performing angle
adjustment.
Warning
•Follow the steps in the Installation Guide to install the Touch Unit. If this is
not installed correctly, it could cause damage to your eyes due to the
powerful light emitted.
•Do not use the Touch Unit near medical equipment such as pace makers.
Furthermore, when using the Touch Unit, make sure there is no medical
equipment such as pace makers, in the surrounding area. Electromagnetic
interference may cause medical equipment to malfunction.
Caution
•Do not use the Touch Unit near magnetic storage media such as magnetic
cards, or precision electronic devices such as computers, digital watches, or
cell phones. Data could be corrupted or a malfunction could occur.
•When installing the Touch Unit on a magnetic surface, be careful not to trap
your fingers or any other part of your body between the magnet and the
installation surface.
Attention
•Do not connect the Touch Unit to any devices except for EB-595Wi. The
device could malfunction, or laser light could leak beyond the limit.
•Make sure you use the supplied Touch Unit connection cable. Operations are
not possible with a commercially available cable.
•When disposing of the Touch Unit, do not disassemble it. Dispose according
to your local or national laws and regulations.
a
See the Installation Guide for the Touch Unit installation methods and
angle adjustment methods.
s Installation Guide
Part Names and Functions
24
Preparing the Projector
This chapter explains how to install the projector and connect projection sources.
Installation Methods
The projector supports the following six different installation methods.
Install the projector according to the installation location.
Turn the projector off when installing the projector or changing the
installation method. Turn the power back on after completing installation.
Warning
•A special method of installation is required when suspending the projector
from a wall or ceiling. If it is not installed correctly, it could fall causing an
accident and injury.
•If you use adhesives on the wall mount plate fixing points or the ceiling
mount fixing points to prevent the screws from loosening, or if you use
things such as lubricants or oils on the projector, the projector case may
crack causing it to fall from its mount. This could cause serious injury to
anyone under the mount and could damage the projector.
When installing or adjusting the mount, do not use adhesives to prevent the
screws from loosening and do not use lubricant or oil and so on.
•Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents are covered, the internal temperature could rise and cause a fire.
•Do not use the projector in a location subject to combustible or explosive gas.
The projector may catch fire because of the high temperature of the lamp
inside the projector.
a
•We recommend using a smooth, board type screen without any
unevenness. If the projection screen is uneven, there may be
distortions in the projected image.
•Distortions may occur in the projected image depending on the
material of the screen and the installation method.
•When mounting the projector on a wall or ceiling, or placing the
projector vertically, make sure you use the correct tools for the
installation method.
s "Optional Accessories" p.184
•The default Projection setting is Front/Upside Down. You can
change to other Projection settings from the Configuration menu.
s Extended - Projection p.132
•You can change the Projection setting as follows by pressing down
the [A/V Mute] button on the remote control for about five seconds.
FrontWFront/Upside Down
RearWRear/Upside Down
•Mount the projector on a wall
or ceiling and project images
from in front of a screen.
(Front/Upside Down projection)
•Mount the projector on a wall
or ceiling and project images
from behind a translucent
screen. (Rear/Upside Down pro‐
jection)
Installing the Projector
26
•Project images from in front of
the screen. (Front projection)
•Project images from behind a
translucent screen. (Rear projec‐
tion)
a
Attach the feet when using the projector on a surface such as a desk.
s "Attaching the Feet (only Models with Feet Supplied)" p.15
•Place the projector vertically and
project images from in front of
the screen. (Front/Upside Down
projection)
•Place the projector vertically and
project images from behind the
screen (Rear/Upside Down pro‐
jection)
When Using the Interactive Features (EB-595Wi/EB-585Wi/
EB-575Wi only)
Project from in front of the screen when using the interactive features. Set
Projection to Front/Upside Down or Front.
Attention
The interactive features operates by infrared communication. Note the
following points when installing the projector.
•Make sure there is no strong light or sunlight shining on the Easy Interactive
Function receiver, the projection screen, the projector itself, or the rear of the
projector.
•Do not install the projector in direct sunlight through a window. This could
cause the interactive features to malfunction.
•Install the projector so that the Easy Interactive Function receiver is not too
close to fluorescent lights. If the surrounding area is too bright, the
interactive features may not operate correctly.
•If there is any dust stuck to the Easy Interactive Function receiver, it could
interfere with infrared communication and you may not be able to use the
features normally. Clean the receiver if it is dirty.
s "Cleaning" p.171
•Do not put paint or any stickers on the cover of the Easy Interactive
Function receiver.
•When using the interactive features, do not use an infrared remote control or
microphone in the same room. The interactive pen could malfunction.
•Do not use devices that generate powerful noise, such as rotary devices or
transformers, near the projector. You may not be able to operate the
interactive features.
Installing the Projector
27
a
•When using the interactive features, install so that the projected
screen is a rectangle without any distortion.
•When using the interactive features in the same room as multiple
projectors, interactive pen operations may become unstable. In this
situation, connect the optional remote control cable set (ELPKC28)
to the projectors, and change Sync of Projectors to Wired from the
Configuration menu.
s "Connecting Multiple Projectors (EB-595Wi/EB-585Wi/EB-575Wi
only)" p.42
s Extended - Easy Interactive Function - Advanced - Sync of
Projectors p.135
Setting up the Touch Unit (EB-595Wi only)
When using the Touch Unit, install the projector using one of the following
methods. The Touch Unit cannot be used if another installation method is
used.
•Mount the projector on a wall or suspend it from a ceiling and project
images from in front of the screen (when suspending the projector from
a ceiling, the optional ceiling mount (ELPMB23) is required)
•Install vertically on a desk and project from the front of the desk (the
optional interactive table mount (ELPMB29) is required)
s "Optional Accessories" p.184
Installing the Projector
28
The port name, location, and connector orientation differ depending on the source being connected.
Connecting a Computer
To project images from a computer, connect the computer using one of the following methods.
ABWhen using the optional computer cable
Connect the computer's display output port to the projector's Computer1 or Computer2 port.
You can output audio from the projector's speaker by connecting the computer's audio output port to the projector's Audio1 or Audio2 port using a commercially available
audio cable.
CWhen using the supplied or a commercially available USB cable
Connect the computer's USB port to the projector's USB-B port.
Audio from the computer is output from the projector with the projected image.
DWhen using a commercially available HDMI cable
Connect the computer's HDMI port to the projector's HDMI1/MHL or HDMI2 port.
Audio from the computer is output from the projector with the projected image.
Connecting Equipment
29
a
•When connecting to the Audio1, Audio2, and Computer1 ports, we recommend connecting cables to the ports in the following order: Audio1, Audio2, and then
Computer1.
•You can also set the port used for audio input from the Configuration menu.
s Extended - A/V Settings - Audio Output p.132
•If audio is not output when an HDMI cable is connected, connect a commercially available audio cable to the Audio Input port. After connecting the cable, select
the input port you connected to from HDMI1 Audio Output or HDMI2 Audio Output from the Configuration menu.
s Extended - A/V Settings - HDMI1 Audio Output/HDMI2 Audio Output p.132
•You can use a USB cable to connect the projector to a computer to project images from the computer. This function is called USB Display.
s "Projecting with USB Display" p.48
•When projecting a computer connected to the Monitor Out/Computer2 port, set the Monitor Out Port to Computer2 from the Configuration menu.
s Extended - Operation - Monitor Out Port p.132
Connecting Equipment
30
Connecting a Smartphone or Tablet Device
You can connect smartphones and tablet devices. By using a commercially available MHL cable, you can connect the MHL port on your device to the
HDMI1/MHL port on the projector. You can send the audio with the projected image.
HDMI1/MHL
When you connect a smartphone or tablet device to the projector, the device starts charging when images are projected.
Attention
•You may not be able to connect an MHL cable to all devices.
•Make sure the connection cable supports the MHL standards. If you connect a cable that does not support the MHL standards, the smartphone or tablet device may
become hot, leak, or explode.
•If you connect using a commercially available MHL-HDMI conversion adapter, charging the smartphone or tablet device may not work or you may not be able to
perform operations from the projector's remote control.
a
•If images are not projected correctly, disconnect and then reconnect the MHL cable.
•You may not be able to project correctly depending on the model and settings of the smartphone or tablet device.
Connecting Equipment
31
Connecting Image Sources
To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods.
AWhen using a commercially available video cable
Connect the video output port on the image source to the projector's Video port using a commercially available video cable.
You can output audio from the projector's speaker by connecting the audio output port on the image source to the projector's Audio port using a commercially available audio
cable.
BWhen using a commercially available S-video cable
Connect the video output port on the image source to the projector's S-Video port using a commercially available video cable.
You can output audio from the projector's speaker by connecting the audio output port on the image source to the projector's Audio port using a commercially available audio
cable.
CDWhen using the optional component video cable
s "Optional Accessories and Consumables" p.184
Connect the component output port on the image source to the projector's Computer1 or Computer2 port.
You can output audio from the projector's speaker by connecting the image source's audio output port to the projector's Audio1 or Audio2 port using a commercially available
audio cable.
EWhen using a commercially available HDMI cable
Connect the image source's HDMI port to the projector's HDMI1/MHL or HDMI2 port.
Audio from the image source is output from the projector with the projected image.
Connecting Equipment
32
HDMI1/MHL
HDMI2
Attention
•Turn off the equipment you want to connect before connecting. If the input source is on when you connect it to the projector, it could cause a malfunction.
•If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction.
Connecting Equipment
33
a
•You can also set the port used for audio input from the Configuration menu.
s Extended - A/V Settings - Audio Output p.132
•When projecting an image source connected to the Monitor Out/Computer2 port, set the Monitor Out Port to Computer2 from the Configuration menu.
s Extended - Operation - Monitor Out Port p.132
•If audio is not output when an HDMI cable is connected, connect a commercially available audio cable to the Audio Input port. After connecting the cable, select
the Audio Input port you connected to from HDMI1 Audio Output or HDMI2 Audio Output from the Configuration menu.
s Extended - A/V Settings - HDMI1 Audio Output/HDMI2 Audio Output p.132
•If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projector.
•When using a commercially available 2RCA(L/R)/stereo mini-pin audio cable, make sure it is labeled "No resistance".
Connecting Equipment
34
Connecting USB Devices
You can connect devices such as USB memory, the optional Document Camera, and USB compatible hard disks and digital cameras.
Using the USB cable supplied with the USB device, connect the USB device to the USB-A port on the projector.
When the USB device is connected, you can project image files on the USB memory or digital camera using PC Free.
s "Projecting Images Stored on a USB Storage Device (PC Free)" p.97
If the Document Camera is connected while projecting images from another input port, press the [USB] button on the remote control, or the [Source Search]
button on the control panel, to switch to images from the Document Camera.
s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.46
a
While projecting images from a USB device, if you want to connect an audio output device, connect it to the Audio2 port.
Connecting Equipment
35
Attention
•If you use a USB hub, operation may not be performed correctly. Devices such as digital cameras and USB devices should be connected to the projector directly.
•When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk.
•Connect a digital camera or hard disk to the projector using a USB cable supplied with or specified for use with the device.
•Use a USB cable less than 3 m in length. If the cable exceeds 3 m, PC Free may not function correctly.
Removing USB Devices
After finishing projecting, remove USB devices from the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from
the projector.
Connecting Equipment
36
Connecting a Microphone
You can output microphone audio from the projector's speaker by connecting a commercially available dynamic microphone.
a
•Plug-in-power is not supported.
•Adjust Mic Input Level if the microphone audio is difficult to hear, or if it is too loud resulting in a crackling sound.
s Settings - Mic Input Level p.131
•Make the following settings to output audio from a microphone when the projector is off.
- Set Standby Mode to Communication On.
- Set A/V Output to Always On.
s ECO - Standby Mode p.144
s Extended - A/V Settings - A/V Output p.132
Connecting Equipment
37
Connecting External Equipment
You can output images and audio by connecting an external monitor or speaker.
AWhen outputting images to an external monitor
Connect the external monitor to the projector's Monitor Out port using the cable supplied with the external monitor.
BWhen outputting audio to an external speaker
Connect the external speaker to the projector's Audio Out port using a commercially available audio cable.
Connecting Equipment
38
a
•When outputting images to an external monitor, set Monitor Out Port to Monitor Out from the Configuration menu.
s Extended - Operation - Monitor Out Port p.132
•When Standby Mode is set to Communication On, you can perform the following operations even when the projector is off (only when A/V Output is set to
Always On).
- Output images to an external monitor
- Output audio from an external speaker (audio being input from the USB-B and LAN ports cannot be output)
s ECO - Standby Mode p.144
s Extended - A/V Settings - A/V Output p.132
•Only analog RGB signals from the Computer1 port can be output to an external monitor. You cannot output signals input from other ports or component video
signals.
•Setting gauges for functions such as Keystone, Configuration menu, or Help screens are not output to the external monitor.
•Content drawn using the interactive features is not displayed on an external monitor (EB-595Wi/EB-585Wi/EB-575Wi only). Content drawn using the supplied
Easy Interactive Tools can be displayed on an external monitor.
•When the audio cable jack is inserted into the Audio Out port, audio stops being output from the projector's built-in speakers and switches to external
output.
Connecting Equipment
39
Connecting a LAN Cable
Connect a LAN port on network hubs or other equipment to the projector's LAN port with a commercially available 100BASE-TX or 10BASE-T LAN
cable.
By connecting a computer to the projector over a network, you can project images and check the status of the projector.
a
To prevent malfunctions, use a category 5 or higher shielded LAN cable.
Connecting Equipment
40
Installing the Optional Wireless LAN Unit
a
Remove both of the cable cover fixing screws to open the cable
cover.
b
Connect the Wireless LAN unit to the wireless LAN unit installation
section.
Connecting Equipment
41
Connecting Multiple Projectors (EB-595Wi/EB-585Wi/EB-575Wi only)
When using the interactive features in the same room as multiple versions of the same projector, you need to connect the optional remote control cable set
(ELPKC28) to the SYNC port on each projector. Interactive pen operations are stabilized by linking the projectors using cables.
In Out
The SYNC port has an IN and OUT socket. When you connect one end of the remote control cable set to an IN socket, connect the other end to an OUT
socket.
After connecting the cables, set Sync of Projectors to Wired from the Configuration menu.
s Extended - Easy Interactive Function - Advanced - Sync of Projectors p.135
Connecting Equipment
42
a
•When connecting three or more projectors, you do not need to connect the first projector to the last projector.
Out Out
In In
•When using the projector in the same room as another projector that does not support cable connection, set Wired Sync Mode to Mode 2 from the
Configuration menu.
s Extended - Easy Interactive Function - Advanced - Wired Sync Mode p.135
•If you do not have the optional remote control cable set, change the Distance of Projectors setting from the Configuration menu.
s Extended - Easy Interactive Function - Advanced - Distance of Projectors p.135
Connecting Equipment
43
Basic Usage
This chapter explains how to project and adjust images.
Getting Ready to Project
This section explains the procedure for connecting the projector to a
computer with the computer cable and projecting images.
Caution
Be sure to connect the cable of the source to the projector first, and then
connect the power cord to the projector.
ON
a
Connect the projector to the computer with the computer cable.
b
Connect the projector to an electrical outlet with the power cord.
c
Turn on the projector.
Warning
When turning on the projector, do not look into the projection lens.
This could cause damage to eyesight due to the powerful light emitted.
When turning on the projector at a distance using the remote control,
make sure there is no one looking into the lens.
Take particular care when there are children present.
d
Turn on the computer.
e
Change the computer's screen output.
When using a laptop computer, you need to change the screen
output from the computer.
Hold down the Fn key (function key), and press the b key.
a
•The method for changing differs depending on the computer
being used. See the documentation supplied with the
computer.
•Press the [t] power button twice to turn the projector off.
If the image is not projected, you can change the projected image using one
of the following methods.
•Press the [Source Search] button on the control panel or the remote
control.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.46
•Press the button for the target port on the remote control.
s "Switching to the Target Image Using the Remote Control" p.47
Projecting Images
45
a
After projecting the image, adjust the image if necessary.
s "Correcting Keystone Distortion" p.52
s "Correcting the Focus" p.57
Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Source Search] button to project images from the port currently
receiving an image.
Using Remote Control Using the Control Panel
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
Projecting Images
46
a
•You can make settings so that images are projected from the same
input port the next time the projector is turned on.
s Extended - Operation - Startup Source Search p.132
•The following screen is displayed while no image signals are input.
Switching to the Target Image Using the Remote
Control
You can change directly to the target image by pressing the following
buttons on the remote control.
Remote control
AEach time the button is pressed, it cycles through the images being input
from the following sources.
•Computer1 port
•Computer2 port
BEach time the button is pressed, it cycles through the images being input
from the following sources.
•S-Video port
•Video port
•HDMI1/MHL port
•HDMI2 port
CEach time the button is pressed, it cycles through the images being input
from the following sources.
•USB Display
•Images from the device connected to the USB-A port
DSwitches to the image from the network connected device.
Projecting Images
47
Projecting with USB Display
You can use the supplied or a commercially available USB cable to connect
the projector to a computer to project images from the computer.
You can send the computer's audio with the projected image.
Set USB Type B to USB Display/Easy Interactive Function or Wireless
Mouse/USB Display to use USB Display on EB-595Wi/EB-585Wi/
EB-575Wi.
s Extended - USB Type B p.132
System Requirements
For Windows
OS Windows 2000
*1
Windows XP Professional 32 bit
Home Edition 32 bit
Tablet PC Edition 32 bit
Windows Vista Ultimate 32 bit
Enterprise 32 bit
Business 32 bit
Home Premium 32 bit
Home Basic 32 bit
Windows 7 Ultimate 32- and 64-bit
Enterprise 32- and 64-bit
Professional 32- and 64-bit
Home Premium 32- and 64-bit
Home Basic 32 bit
Starter 32 bit
Windows 8 Windows 8 32- and 64-bit
Windows 8 Pro 32- and 64-bit
Windows 8 Enterprise 32- and
64-bit
Windows 8.1 Windows 8.1 32- and 64-bit
Windows 8.1 Pro 32- and 64-bit
Windows 8.1 Enterprise 32- and
64-bit
CPU Mobile Pentium III 1.2 GHz or faster
Recommended: Pentium M 1.6 GHz or faster
Amount of Mem‐
ory
256 MB or more
Recommended: 512 MB or more
Hard Disk Space 20 MB or more
Display Resolution of no less than 640x480 and no higher than
1600x1200.
Display color of 16-bit color or greater
*1 Service Pack 4 only
For OS X
OS Mac OS X 10.5.x 32 bit
Mac OS X 10.6.x 32- and 64-bit
OS X 10.7.x 32- and 64-bit
OS X 10.8.x
OS X 10.9.x
CPU Power PC G4 1GHz or faster
Recommended: Core Duo 1.83GHz or faster
Amount of Memo‐
ry
512 MB or more
Hard Disk Space 20 MB or more
Projecting Images
48
Display Resolution of no less than 640x480 and no higher than
1680x1200.
Display color of 16-bit color or greater
Connecting for the First Time
The first time you connect the projector and the computer using the USB
cable, the driver needs to be installed. The procedure is different for
Windows and OS X.
a
•You do not need to install the driver the next time you connect.
•When inputting images from multiple sources, change the input
source to USB Display.
•If you are using a USB hub, operations may not be performed
correctly. Connect the USB cable directly to the projector.
•You cannot change option settings while using USB Display.
For Windows
a
Connect the computer's USB port to the projector's USB-B port
using the supplied or a commercially available USB cable.
a
For Windows 2000 or Windows XP, a message asking you if
you want to restart your computer may be displayed. Select
No.
For Windows 2000
Double-click Computer - EPSON PJ_UD - EMP_UDSE.EXE.
For Windows XP
Driver installation starts automatically.
For Windows Vista/Windows 7/Windows 8/Windows 8.1
When the dialog box is displayed, click run EMP_UDSE.EXE.
b
When the License Agreement screen is displayed, click Agree.
c
Computer images are projected.
It may take a while for computer images to be projected. Until the
computer images are projected, leave the equipment as is and do not
disconnect the USB cable or turn off the power of the projector.
d
Disconnect the USB cable when you are finished.
When disconnecting the USB cable, there is no need to use Safely
Remove Hardware.
a
•If it is not installed automatically, double-click My Computer
- EPSON PJ_UD - EMP_UDSE.EXE on your computer.
•If nothing is projected, click All Programs - EPSON
Projector - Epson USB Display - Epson USB Display
Ver.x.xx on your computer.
•When using a computer running Windows 2000 under user
authority, a Windows error message is displayed and you may
not be able to use the software. In this case, try updating
Windows to the latest version, restart, and then try to connect
again.
For more details, contact your local dealer or the nearest
address provided in the following document.
s Epson Projector Contact List
Projecting Images
49
For OS X
a
Connect the computer's USB port to the projector's USB-B port
using the supplied or a commercially available USB cable.
The Setup folder of USB Display is displayed in the Finder.
b
Double-click the USB Display Installer icon.
c
Follow the on-screen instructions to install.
d
When the License Agreement screen is displayed, click Agree.
Enter the administrator authority password and start the installation.
When the installation is complete, the USB Display icon is displayed
in the Dock and menu bar.
e
Computer images are projected.
It may take a while for computer images to be projected. Until the
computer images are projected, leave the equipment as is and do not
disconnect the USB cable or turn off the power of the projector.
f
When you have finished, select Disconnect from the menu bar or
from the USB Display icon on the Dock. You can then disconnect
the USB cable.
a
•If the USB Display Setup folder is not displayed automatically
in the Finder, double-click EPSON PJ_UD - USB Display
Installer on your computer.
•If nothing is projected for some reason, click the USB
Display icon in the Dock.
•If there is no USB Display icon on the Dock, double-click
USB Display in the application folder.
•If you select Exit from the USB Display icon on the Dock,
USB Display does not start automatically when you connect
the USB cable.
Uninstalling
For Windows 2000
a
Click Start, select Settings, and then click Control Panel.
b
Double-click Add/Remove Programs.
c
Click Change or Remove Programs.
d
Select Epson USB Display and click Change/Remove.
For Windows XP
a
Click Start, and then click Control Panel.
b
Double-click Add or Remove Programs.
c
Select Epson USB Display, and then click Remove.
For Windows Vista/Windows 7
a
Click Start, and then click Control Panel.
b
Click Uninstall a program under Programs.
c
Select Epson USB Display, and then click Uninstall.
For Windows 8/Windows 8.1
a
Open Charms, and then select Search. Right-click (hold down)
Epson USB Display Ver.x.xx.
b
Select Uninstall from the app bar.
c
Select Epson USB Display, and then click Uninstall.
Projecting Images
50
d
Follow the on-screen instructions to uninstall.
For OS X
a
Double-click Applications - USB Display - Tool.
b
Run USB Display Uninstaller.
Projecting Images
51
Correcting Keystone Distortion
You can correct keystone distortion using one of the following methods.
•H/V-Keystone
Manually correct distortion in the horizontal and vertical directions
independently.
•Quick Corner
Manually correct the four corners independently.
H/V-Keystone
Manually correct distortion in the horizontal and vertical directions
independently. H/V-Keystone correction is ideal for fine-tuning keystone
distortion.
You can use H/V-Keystone to correct the projected image under the
following conditions.
Correction angle: Approx. 3˚ right and left/Approx. 3˚ up and down
a
Press the [w] or [v] buttons on the control panel during
projection to display the Keystone screen.
a
When you press the [w][v] buttons on the control panel, the
correction method screen set in the Configuration menu is
displayed. When you want to perform horizontal and vertical
keystone correction using the [w][v] buttons, set Keystone to
H/V-Keystone from the Configuration menu.
s Settings - Keystone p.131
Adjusting Projected Images
52
b
Press the following buttons to correct keystone distortion.
Press the [w] or [v] buttons to correct vertical distortion.
Press the [Wide] or [Tele] buttons to correct horizontal distortion.
a
You can set H/V-Keystone from the Configuration menu.
s Settings - Keystone - H/V-Keystone p.131
Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately.
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.125
Using Remote Control Using the Control Panel
b
Select Keystone from Settings.
Adjusting Projected Images
53
c
Select Quick Corner, and then press the [Enter] button.
When the message "If this setting is changed, the image may be
distorted."is displayed, press the [Enter] button again.
d
Select the corner to correct using the [ ], [ ], [ ], and[ ]
buttons on the remote control, or the [w], [v], [Wide], and [Tele]
buttons on the control panel, and then press the [Enter] button.
e
Correct the position of the corner using the [ ], [ ], [ ], and
[] buttons on the remote control, or the [w], [v], [Wide],
and [Tele] buttons on the control panel.
When you press the [Enter] button, the screen shown in step 4 is
displayed.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
f
Repeat procedures 4 and 5 as needed to adjust any remaining
corners.
g
Press the [Menu] button to finish making corrections.
a
•If the [Esc] button is held down for about two seconds while
the corner selection screen from step 4 is displayed, the
following screen is displayed.
Reset Quick Corner: Resets the result of Quick Corner
corrections.
Switch to H/V-Keystone: Switches the correction method to
H/V-Keystone.
s "Settings Menu" p.131
Adjusting Projected Images
54
Adjusting the Image Size
Press the [Wide] and [Tele] buttons on the control panel to adjust the size
of the projected image.
a
You can also make adjustments from the Configuration menu.
s Settings - Zoom p.131
Adjusting the Position of the Image (Image Shift)
You can fine tune the position of the image without moving the projector.
a
Perform Adjust Zoom or Keystone.
s "Adjusting the Image Size" p.55
s "Correcting Keystone Distortion" p.52
The Image Shift screen is displayed after you have made adjustments.
b
Adjust the projection position using the [ ], [ ], [ ], and [ ]
buttons on the remote control, or the [w], [v], [Wide], and [Tele]
buttons on the control panel.
Using Remote Control Using the control panel
You can shift the image diagonally by pressing any pair of adjacent
[], [ ], [ ], and [ ] buttons, or a combination
of [w], [v], [Wide], and [Tele] buttons on the remote control or
control panel.
Adjusting Projected Images
55
c
Press the [Esc] button to close the adjustment screen.
The adjustment screen disappears if no operation is performed after
approximately 10 seconds.
a
•You cannot adjust the image position when Zoom is set to the
maximum Wide position.
•The Image Shift setting is retained even if the projector is turned off.
You need to re-adjust the position if you change the installation
location or angle of the projector.
•You can also use the Configuration menu to adjust the position of
the image.
s Settings - Image Shift p.131
Adjusting the Vertical Position of the Image
(Models Supplied with the Feet only)
Extend the feet. You can adjust the vertical position of the image by tilting
the projector up to 1.5˚.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.
Raising the Height of the Image
AYou can raise the height of the image by extending the rear feet.
BRetract the rear feet to return the image to its original height.
Lowering the Height of the Image
AYou can lower the height of the image by extending the front foot.
BRetract the front foot to return the image to its original height.
Adjusting the Horizontal Position of the Image
(Models Supplied with the Feet only)
Extend and retract the rear feet to adjust the projector's horizontal tilt.
Adjusting Projected Images
56
AExtend the rear foot.
BRetract the rear foot.
Correcting the Focus
Display the test pattern, and then adjust the focus.
a
Press the [Menu] button.
s "Using the Configuration Menu" p.125
Using Remote Control Using the Control Panel
b
Select Pattern from Settings.
c
Select Test Pattern, and then press the [Enter] button.
When projecting images on a 4:3 screen using a wide-screen
projector, set Pattern Type to Pattern 5 and select Pattern
Display.
s Settings - Pattern - Pattern Type p.131
Adjusting Projected Images
57
d
Open the air filter cover.
e
Focus to the center-bottom ( ) of the projected screen.
Move the focus lever to adjust the focus.
Adjusting Projected Images
58
f
Check that the focus matches the corners ( ) of the projected
screen.
If any areas are out of focus, use the focus lever to adjust until the
corners are the same focus.
g
To remove the Test Pattern, press the [Esc] button on the remote
control or the control panel.
Adjusting the Volume
You can adjust the volume using one of the following methods.
•Press the [Volume] buttons on the remote control to adjust the volume.
[a] Decreases the volume.
[b] Increases the volume.
Remote control
•Adjust the volume from the Configuration menu.
s Settings - Volume p.131
Caution
Do not start when the volume is set too high.
A sudden increase in volume may cause loss of hearing. Always lower the
volume before powering off, so that you can power on and then gradually
increase the volume.
Adjusting Projected Images
59
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode Application
Dynamic Ideal for use in a bright room. This is the brightest
mode.
Presentation Ideal for making presentations using color materials
in a bright room.
Theatre Ideal for watching films in a dark room. Gives
images a natural tone.
Photo
*1
Ideal for projecting still pictures, such as photos, in
a bright room. The images are vivid and brought
into contrast.
Sports
*2
Ideal for watching TV programmes in a bright
room. The images are vivid and brought to life.
sRGB Ideal for images that conform to the sRGB
g
color
standard.
Blackboard Even if you are projecting onto a blackboard
(greenboard), this setting gives your images a
natural tint, just like when projecting onto a screen.
Whiteboard Ideal for making presentations using a whiteboard.
*1 This selection is only available when the input signal is RGB or when the
source is USB Display, USB, or LAN.
*2 This selection is only available when the input signal is component video, or
when the input source is Video or S-Video.
Each time you press the [Color Mode] button, the Color Mode name is
displayed on the screen and the Color Mode changes.
Remote control
a
You can set Color Mode from the Configuration menu.
s Image - Color Mode p.128
Setting Auto Iris
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
a
Press the [Menu] button.
s "Using the Configuration Menu" p.125
Using Remote Control Using the Control Panel
Adjusting Projected Images
60
b
Select Auto Iris from Image.
c
Select Normal or High Speed.
The setting is stored for each Color Mode.
d
Press the [Menu] button to finish making settings.
a
Auto Iris can only be set when the Color Mode is set to
Dynamic or Theatre.
Changing the Aspect Ratio of the Projected Image
You can change the Aspect Ratio
g
of the projected image to suit the type,
the ratio of height and width, and the resolution of the input signals.
Available Aspect Modes vary depending on the image signal currently being
projected.
Changing Methods
Each time you press the [Aspect] button on the remote control, the aspect
mode name is displayed on the screen and the aspect ratio changes.
Remote control
a
You can set the aspect ratio from the Configuration menu.
s Signal - Aspect p.129
Changing the Aspect Mode (EB-595Wi/EB-585Wi/EB-585W/
EB-575Wi/EB-575W only)
Projecting Images from Video Equipment or from the HDMI/MHL Port
Each time the [Aspect] button on the remote control is pressed, the aspect
mode changes in the order Normal or Auto, 16:9, Full, Zoom, and
Native.
Example: 1080p signal input (resolution: 1920x1080, aspect ratio: 16:9)
Adjusting Projected Images
61
ANormal or Auto
B16:9
CFull
DZoom
ENative
Projecting Images from a Computer
The following shows projection examples for each aspect mode.
Aspect mode Input Signal
XGA 1024X768(4:3) WXGA 1280X800(16:10)
Normal
Aspect mode Input Signal
XGA 1024X768(4:3) WXGA 1280X800(16:10)
16:9
Full
Zoom
Native
a
If parts of the image are missing, set the Resolution setting to Wide
or Normal from the Configuration menu, according to the size of the
computer panel.
s Signal - Resolution p.129
Adjusting Projected Images
62
Changing the Aspect Mode (EB-580/EB-570 only)
Projecting Images from Video Equipment
Each time the [Aspect] button is pressed, the aspect mode changes in the
order 4:3 and 16:9.
When inputting a 720p/1080i signal and the aspect mode is set to 4:3, a 4:3
zoom is applied (the right and left sides of the image are cut off).
Example: 720p signal input (resolution: 1280x720, aspect ratio: 16:9)
A4:3
B16:9
Projecting Images from the HDMI/MHL Port
Each time the [Aspect] button is pressed, the aspect mode changes in the
order Auto, 4:3, and 16:9.
Example: 1080p signal input (resolution: 1920x1080, aspect ratio: 16:9)
AAuto
B4:3
C16:9
Projecting Images from a Computer
Each time the [Aspect] button is pressed, the aspect mode changes in the
order Normal, 4:3, and 16:9.
The following shows projection examples for each aspect mode.
Aspect mode Input Signal
XGA 1024X768(4:3) WXGA 1280X800(16:10)
Normal
4:3
16:9
a
If parts of the image are missing, set the Resolution setting to Wide
or Normal from the Configuration menu, according to the size of the
computer panel.
s Signal - Resolution p.129
Adjusting Projected Images
63
Using the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only)
Follow the instructions in these sections to use the interactive features.
The interactive features turn any wall into an interactive whiteboard, either
with or without a computer. Three interactive modes are available and it's
easy to shift between each mode:
•In annotation mode, you can use interactive pens or your finger
(EB-595Wi) to add notes to content projected from a computer, tablet,
document camera, or other source. This helps you emphasize projected
information or include additional notes for more effective lessons or
presentations.
•In whiteboard mode, you can use interactive pens or your finger to
write on the projected "whiteboard." You do not need to use a
computer or install any additional software to use the built-in
whiteboard drawing feature.
Interactive Feature Modes
65
•In computer interactive mode, you can use interactive pens or your
finger as you would use a mouse. This allows you to navigate, select,
and scroll through content projected from your computer.
a
You can also use the Easy Interactive Tools software to provide
additional interactive features, such as saving your annotations, and
then printing them. See the Easy Interactive Tools Operation Guide
built into the software for instructions.
Drawing on a Projected Image (Annotation Mode)
Annotation mode lets you project from a computer, tablet, video device, or
other source and add notes to your projected content using the interactive
pens or your finger (EB-595Wi). You can use both pens at the same time.
You can also use both pens and your finger at the same time
(EB-595Wi).
a
Turn on the projector.
b
Make sure you have calibrated the first time you use your
projector.
s "Pen Calibration" p.74
s "Calibrating for Touch Operations with Your Finger" p.82
c
Project an image from a connected device.
d
Hold an interactive pen close to the projected screen or tap the
projected screen using your finger.
e
To write or draw, tap the or toolbar tab.
You see the toolbar on the projected image, for example:
Interactive Feature Modes
66
a
•You can also control the projector from the projected screen
by using the projector control toolbar displayed on the screen.
Tap the or icon if the projector control toolbar is
not displayed.
•You can move the and toolbar tabs up and down,
and the or toolbar tab right and left.
You can write on the projected screen.
s "Using the Interactive Pens" p.73
s "Using Your Finger for Interactive Touch Operations (EB-595Wi only) "
p.80
s "Interacting with the Screen" p.86
Using the Projected Screen as a Whiteboard
(Whiteboard Mode)
You can use the interactive pens or your finger (EB-595Wi) to write or
draw on the projection surface just as you would on a chalkboard or dry
erase board. You can use both pens at the same time. You can also use
both pens and your finger at the same time (EB-595Wi).
a
Turn on the projector.
b
Make sure you have calibrated the first time you use your
projector.
s "Pen Calibration" p.74
s "Calibrating for Touch Operations with Your Finger" p.82
c
Hold an interactive pen close to the projected screen or tap the
projected screen using your finger.
d
Tap the or toolbar tab.
The toolbar is displayed.
e
Tap the icon on the toolbar.
You see the whiteboard screen and toolbar, for example:
a
•You can also control the projector from the projected screen
by using the projector control toolbar displayed on the screen.
Tap the or icon if the projector control toolbar is
not displayed.
•You can move the and toolbar tabs up and down,
and the or toolbar tab right and left.
Interactive Feature Modes
67
f
To write or draw on the screen, use the toolbar on the right or left
side.
s "Using the Interactive Pens" p.73
s "Using Your Finger for Interactive Touch Operations (EB-595Wi
only) " p.80
s "Interacting with the Screen" p.86
a
You can also use the Easy Interactive Tools software to provide
additional interactive features, such as treating the drawing area as a
page, and creating multiple pages to draw on. See the Easy Interactive
Tools Operation Guide for instructions.
Controlling Computer Features from a Projected
Screen (Computer Interactive Mode)
You can navigate, select, and interact with your computer programs from
the projected screen using the interactive pens or your finger (EB-595Wi),
just as you would with a mouse.
Computer Interactive Mode System Requirements
Your computer must use one of the following operating systems to use the
computer interactive mode.
Windows
Windows XP Service Pack 2 and Service Pack 3
•Professional (32-bit)
•Home Edition (32-bit)
•Tablet PC Edition (32-bit)
Windows Vista Service Pack 2
•Ultimate (32-bit)
•Enterprise (32-bit)
•Business (32-bit)
•Home Premium (32-bit)
•Home Basic (32-bit)
Windows 7 Service Pack 1
•Ultimate (32- and 64-bit)
•Enterprise (32- and 64-bit)
•Professional (32- and 64-bit)
•Home Premium (32- and 64-bit)
Windows 8
•Windows 8 (32- and 64-bit)
•Windows 8 Pro (32- and 64-bit)
•Windows 8 Enterprise (32- and 64-bit)
Windows 8.1
•Windows 8.1 (32- and 64-bit)
•Windows 8.1 Pro (32- and 64-bit)
•Windows 8.1 Enterprise (32- and 64-bit)
Mac
OS X
•Mac OS X 10.5.x
•Mac OS X 10.6.x
•OS X 10.7.x
•OS X 10.8.x
•OS X 10.9.x
Ubuntu
Ubuntu
•12.04 LTS
•12.10
•13.04
•13.10
Using Computer Interactive Mode
You can control your computer programs with the projected screen using
computer interactive mode.
Interactive Feature Modes
68
To use computer interactive mode, connect your computer to the projector
with the supplied USB cable.
For OS X, you need to install the Easy Interactive Driver to use computer
interactive mode.
a
•When you use multiple displays with Windows 7 and use interactive
features on the secondary display, make the following settings:
- Set the Pen Operation Mode setting to One User/Pen in the Easy
Interactive Function setting in the projector's Extended menu
(EB-585Wi/EB-575Wi).
- Set the Pen Operation Mode setting to Mode 2 in the Easy
Interactive Function setting in the projector's Extended menu
(EB-595Wi).
- Go to Control Panel > Hardware and Sound > Table PC Settings
> Setup to launch the setup program and configure the interactive
features.
If you set up a third display, you cannot use interactive features with
that display.
You cannot write or draw across multiple screens.
•To use computer interactive mode over a network, you need to
install EasyMP Network Projection version 2.85 or later (for
Windows) or 2.83 or later (for OS X), or Quick Wireless version
1.32 or later.
a
If you are using OS X, install the Easy Interactive Driver on your
computer the first time you use the interactive features.
s "Easy Interactive Driver System Requirements (OS X only)"
p.71
s "Installing Easy Interactive Driver on OS X" p.72
b
Connect the projector to your computer using a USB cable.
a
You do not need a USB cable when using computer interactive
mode over a network.
s "Using the Interactive Features over a Network" p.92
c
Turn on the projector.
d
Project your computer screen.
e
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
f
Select the USB Type B setting and press the [Enter] button.
Interactive Feature Modes
69
g
Select one of the following:
•To use computer interactive mode, select Easy Interactive
Function.
•To use computer interactive mode and USB Display at the same
time, select USB Display/Easy Interactive Function.
a
When projecting using USB Display, response time may be
slower.
h
Select the Easy Interactive Function setting from the Extended
menu and press the [Enter] button.
i
Select the Pen Operation Mode setting depending on the model
used:
•For EB-585Wi/EB-575Wi: Select either Two Users/Mouse or One
User/Mouse.
•For EB-595Wi: Select one of the following according to the
operating system of the connected computer.
- Windows XP or earlier: Select Mode 1.
- Windows Vista, Windows 7, Windows 8, and OS X: Select Mode
2.
- Linux: Select Mode 3.
j
Press the [Enter] button and press the [Menu] button to exit the
projector's configuration menu.
k
Make sure you have calibrated the first time you use your
projector.
s "Pen Calibration" p.74
s "Calibrating for Touch Operations with Your Finger" p.82
l
Hold an interactive pen close to the projected screen or tap the
projected screen using your finger.
The icon is displayed on the projected screen.
Interactive Feature Modes
70
a
•The icon is displayed on the right for the first time.
Next time, it is displayed on the side from which you last
opened the toolbar.
•If the icon is not displayed, set the Pen Mode Icon
setting to On in the projector's Extended menu.
s Extended - Display - Pen Mode Icon p.132
m
Select the icon, and then select the icon.
a
You can also change to computer interactive mode by doing the
following:
•Pressing the [Pen Mode] button on the remote control.
•Changing the Pen Mode setting on the projector's Extended
menu to PC Interactive.
s Extended - Easy Interactive Function - Pen
Mode p.135
You can now operate the computer using the interactive pen or your
finger.
s "Using the Interactive Pens" p.73
s "Using Your Finger for Interactive Touch Operations (EB-595Wi only) "
p.80
s "Interacting with the Screen" p.86
s "Using the Interactive Features over a Network" p.92
a
•You can also control the projector from the projected screen by
using the projector control toolbar displayed on the screen. Tap the
or icon if the projector control toolbar is not displayed.
•You can move the and toolbar tabs up and down, and
the or toolbar tab right and left.
•You can also do the following in computer interactive mode:
- Use the Tablet PC input panel in Windows 7 or Windows Vista.
- Use Ink Tools for annotation in Microsoft Office applications.
•Using two interactive pens at the same time may cause interference
in some application software. In that case, move any pen you are not
using away from the projection screen.
Easy Interactive Driver System Requirements (OS X only)
To use computer interactive mode, you must install the Easy Interactive
Driver on your computer. Check the system requirements necessary to run
the software.
Interactive Feature Modes
71
Operating system Mac OS X 10.5.x
Mac OS X 10.6.x
OS X 10.7.x
OS X 10.8.x
OS X 10.9.x
CPU Power PC G4 1 GHz or faster
(CoreDuo 1.83 GHz or faster recommended)
Memory 512 MB or more
Hard disk space 100 MB or more
Display Resolution between 1024 × 768 (XGA) and 1920 × 1200
(WUXGA)
16-bit color or greater (approximately 32,000 display
colors)
Installing Easy Interactive Driver on OS X
Install Easy Interactive Driver on your computer to use computer
interactive mode.
a
You may have already installed Easy Interactive Tools using the Easy
Install option, which also installs Easy Interactive Driver. See the Easy
Interactive Tools Operation Guide in the Document CD-ROM for
details.
a
Turn on your computer.
b
Insert the EPSON Projector Software for Easy Interactive Function
CD into the computer.
You see the EPSON window.
c
Double-click the Install Navi icon in the EPSON window.
d
Select Custom Install.
e
Follow the on-screen instructions to install the software.
f
Restart your computer.
Interactive Feature Modes
72
Your projector comes with a blue pen and an orange pen, identified by the
color on the end of the pen. You can use either pen, or both at the same
time (one of each color).
Make sure the pen batteries are installed.
APen tip
BBattery light
CButton
DAttachment for optional strap or cord
EBattery cover
To turn on the pen, tap the pen tip or press the button on the side.
When you are finished using the pen, leave the pen as it is far from the
projection screen.
s "Interactive Pen (EB-595Wi/EB-585Wi/EB-575Wi only)" p.20
Attention
•Do not use interactive pens with wet hands or in locations where the pens
may get wet. The interactive pens are not waterproof.
•Keep the projector and projection screen out of direct sunlight, or the
interactive features may not work.
a
•The pens turn off automatically after 20 minutes of inactivity. To
turn a pen back on, tap the pen tip or press the button on the
side.
•For best performance, hold the pen perpendicular to the board, as
shown below. Do not cover the black band near the tip of the
pen.
You can do the following using the pen:
Using the Interactive Pens
73
•Write or draw on the projection surface in annotation mode and
whiteboard mode.
•To select a projected item, such as an icon, tap the projection
surface with the pen tip.
•To draw on the projected screen, tap the projection surface with
the pen and drag it as necessary.
•To move the projected pointer, hover over the surface without
touching it.
•To switch the pen from a drawing tool to an eraser, press the
button on the side.
•Use the pen as a mouse in computer interactive mode.
•To left-click, tap the board with the pen tip.
•To double-click, tap twice with the pen tip.
•To right-click, press the button on the side.
•To click and drag, tap and drag with the pen.
•To move the cursor, hover over the board without touching it.
a
•If you do not want to use the hovering feature, you can turn it off
using the Easy Interactive Function setting in the projector's
Extended menu.
s Extended - Easy Interactive Function - Hovering p.135
•To make a long press of the pen act as a right-click, select the
following settings in the Easy Interactive Function setting in the
projector's Extended menu.
- Set the Pen Operation Mode setting to Two Users/Mouse or One
User/Mouse(EB-585Wi/EB-575Wi).
- Set the Pen Operation Mode setting to Mode 1 or Mode 3
(EB-595Wi).
- Set the Enable Right Click setting to On.
Pen Calibration
Calibration coordinates the positioning of the pen with the location of your
cursor. You only need to calibrate the first time you use your projector.
You can use Auto Calibration to calibrate the system, but Manual
Calibration is also available for finer adjustments or if Auto Calibration
failed.
a
•Move any pen you are not using away from the projection screen
while calibrating the system.
•Calibrate the system again if you notice any discrepancy in
positioning after doing any of the following:
- Performing Keystone correction
- Adjusting the image size
- Using the Image Shift feature
- Changing the projector position
•The calibration results remain until you recalibrate.
Using the Interactive Pens
74
Calibrating Automatically
You need to calibrate the first time you use your projector, and you do not
need the pens or a computer for Auto Calibration.
a
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
b
Select the Easy Interactive Function setting and press the [Enter]
button.
c
Select Auto Calibration and press the [Enter] button.
The following screen appears.
Using the Interactive Pens
75
d
Adjust the focus if necessary, by opening the air filter cover on the
side of the projector and sliding the focus lever.
e
Press the [Enter] button to select Yes.
A pattern appears then disappears, and the system is calibrated. If
you see a message that calibration failed, you need to calibrate
manually.
The cursor location and pen position should match after calibration. If not,
you may need to calibrate manually.
Calibrating Manually
If the cursor location and pen position do not match after auto calibration,
you can calibrate manually.
a
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
b
Select the Easy Interactive Function setting and press the [Enter]
button.
c
Select Manual Calibration and press the [Enter] button.
Using the Interactive Pens
76
The following screen appears.
d
Adjust the focus if necessary, by opening the air filter cover on the
side of the projector and sliding the focus lever.
e
Press the [Enter] button to select Yes.
A flashing green circle appears in the upper left corner of your
projected image.
f
Touch the center of the circle with the tip of the pen.
The circle disappears, and you see another circle below the first
one.
a
For the most accurate calibration, make sure you touch the
center of the circle.
g
Touch the center of the next circle, then repeat. When you get to
the bottom of the column, the next circle appears at the top of a
new column.
Using the Interactive Pens
77
a
•Make sure you are not blocking the signal between the pen
and the interactive receiver.
•If you make a mistake, press the [Esc] button on the remote
control to go back to the previous circle.
•To cancel the calibration process, press and hold the [Esc]
button for 2 seconds.
h
Continue until all of the circles disappear.
Adjusting the Pen Operation Area
The pen operation area is normally adjusted automatically if you connect a
different computer or adjust the computer's resolution. If you notice that
the pen position is incorrect when you operate your computer from the
projected screen (computer interactive mode), you can adjust the pen area
manually.
a
Manual adjustment is not available when projecting from a LAN
source.
a
Switch to computer interactive mode, if necessary.
s "Using Computer Interactive Mode" p.68
b
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
c
Select the Easy Interactive Function setting and press the [Enter]
button.
Using the Interactive Pens
78
d
In the PC Interactive section, select Advanced and press
the [Enter] button.
e
Select Manual Adj. Pen Area and press the [Enter] button.
f
Press the [Enter] button to select Yes.
The mouse pointer moves toward the top left corner.
g
When the mouse pointer stops at the top left corner of the image,
touch the tip of the pointer with the pen.
The mouse pointer moves toward the bottom right corner.
h
When the mouse pointer stops at the bottom right corner of the
image, touch the tip of the pointer with the pen.
Using the Interactive Pens
79
You can use your finger to perform the same functions as the interactive
pen when the Touch Unit is installed.
Safety Instructions for Interactive Touch
Operations
Touch operation with your finger is enabled by installing the Touch Unit
with built-in high-power laser product (EB-595Wi).
The laser radiates from the laser diffusion ports on rear of the Touch
Unit:
Warning
•Children using touch operations with their fingers should always be
accompanied by an adult.
•Never open any cases on the projector or the Touch Unit. Never attempt to
disassemble or modify the projector or the Touch Unit. Electrical voltages
inside the projector can cause severe injury.
•Do not look into the lens of the projector or the laser-emitting area of the
Touch Unit when they are turned on. The laser can damage your eyes. Give
special attention to small children when using touch operations with their
fingers.
•Do not allow the laser light emitted from the Touch Unit to pass through or
be reflected by any optical object, such as a magnifying glass or mirror.
Continued use may result in fire or accidents, and also cause injury.
•Unplug the projector from the outlet and refer all repairs to qualified service
personnel if any problems occur with the projector and the Touch Unit.
Continued use may result in fire or accidents, and can also damage your
eyes.
•Do not look at the laser light using an optical device (for example, eye lope,
magnifying glass, or microscope) within a distance of 70 mm from the laser
diffusion ports of the Touch Unit. This could damage your eyes.
Laser Warning Labels
The Touch Unit is a Class 1 laser product that complies with IEC/
EN60825-1:2007.
The labels indicating the Class 1 laser product and warnings are placed in
the following places on the Touch Unit:
Using Your Finger for Interactive Touch Operations (EB-595Wi only)
80
The labels indicate the following:
•CLASS 1 LASER PRODUCT
•WARNING: Never open any covers on this unit. Laser product inside.
•WARNING:
•CAUTION: CLASS 3B INVISIBLE LASER RADIATION WHEN
OPEN
•AVOID EXPOSURE TO THE BEAM
Using Interactive Touch Operations with Your
Finger
You can use your finger to interact with the projected screen, just as you
would use an interactive pen (EB-595Wi). You can use either a pen or your
finger, or use both at the same time.
The projector recognizes up to six touch points in computer interactive
mode. When performing touch operations with your finger, you can use
two fingers in annotation and whiteboard modes.
Do the following before using your finger for touch operations:
•Install the Touch Unit
•Calibrate the system manually for the pen
•Perform angle adjustment for the Touch Unit
•Calibrate the system for touch operations
See the Installation Guide for details.
s Installation Guide
The Touch Unit turns on and is ready for touch operation with your finger
when you turn on the projector.
a
•Positioning discrepancies may occur depending on the angle of or
the direction you point your finger.
•Touch operations with your finger may not work properly with long
or artificial nails, or with your fingers wrapped in bandages.
•Touch operations may not be recognized correctly if your fingers
and/or pens are too close together or crossed.
•If clothing or another part of your body comes close to or touches
the screen, the touch operations may work incorrectly.
•If you touch the screen with your free hand during touch operations,
the touch operations may work incorrectly.
You can perform the following touch operations with your finger:
Using Your Finger for Interactive Touch Operations (EB-595Wi only)
81
•Use your finger as a mouse in computer interactive mode.
•To left-click, tap the board with your finger.
•To double-click, tap twice with your finger.
•To click and drag, press on and drag an item with your finger.
a
If your device supports these functions, you can also do the following:
•To zoom in or out, touch an item using two fingers, and either
move your fingers away from each other (stretch to zoom out) or
toward each other (pinch to zoom in).
•To rotate the image, touch the image using two fingers and then
rotate your hand.
•To scroll up or down the page, or move backward or forward in a
browser window, use gestures such as flicks.
•Write or draw on the projection surface in annotation mode and
whiteboard mode.
•To select a projected item, such as an icon, tap the projection
surface with your finger.
•To draw on the projected screen for the first time after turning
on the projector, select a pen in the toolbar and tap the
projection surface with your finger. If you do not do this, your
finger works as an eraser the first time you use touch operations.
Calibrating for Touch Operations with Your Finger
Calibration coordinates the positioning of your finger with the location of
your cursor (EB-595Wi). If the cursor location and your finger position do
not match, you need to calibrate again.
Using Your Finger for Interactive Touch Operations (EB-595Wi only)
82
a
•The positioning of your finger is usually adjusted when the Touch
Unit is installed. See the Installation Guide for details.
s Installation Guide
•Make sure you have calibrated the system for the pen using Auto
Calibration or Manual Calibration before calibrating for touch
operations with your finger.
s "Pen Calibration" p.74
•Calibrate for touch operations with your finger again if you notice
any discrepancy in positioning after doing any of the following:
- Calibrating the system for use with the pen (automatically or
manually)
- Performing angle adjustments for the Touch Unit
- Performing Keystone correction
- Adjusting the image size
- Using the Image Shift feature
- Changing the projector position
a
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
b
Select the Easy Interactive Function setting and press the [Enter]
button.
c
Select Touch Unit Setup and press the [Enter] button.
d
Select Touch Calibration and press the [Enter] button.
Using Your Finger for Interactive Touch Operations (EB-595Wi only)
83
The following screen appears.
e
Adjust the focus, if necessary, by opening the air filter cover on
the side of the projector and sliding the focus lever.
f
Press the [Enter] button to select Yes.
A flashing green circle appears in the upper left corner of your
projected image.
g
Touch and hold the center of the circle with your finger until the
circle disappears and the another circle appears, then release it.
a
•For the most accurate calibration, make sure you touch the
center of the circle.
•Do not touch with anything else except the tip of your
finger.
h
Touch the center of the next circle with your finger, then repeat.
When you get to the bottom of the column, the next circle
appears at the top of a new column.
Using Your Finger for Interactive Touch Operations (EB-595Wi only)
84
a
•If you touch the wrong position, press the [Esc] button on the
remote control or control panel. This returns you to the
previous dot. You cannot go back by two dots.
•To cancel touch calibration, hold down the [Esc] button for
two seconds.
•It may take several seconds after all of the dots have
disappeared until touch calibration is complete.
i
Continue until all of the circles disappear.
Using Your Finger for Interactive Touch Operations (EB-595Wi only)
85
Follow these instructions to interact with the projected image or control the
projector.
Switching the Interactive Mode
You can easily switch the interactive mode using the toolbar.
•To switch between computer interactive mode and annotation mode,
select one of the following icons:
•To change from annotation mode or whiteboard mode to
computer interactive mode:
•To change from computer interactive mode to annotation mode
or whiteboard mode:
•To switch between annotation mode and whiteboard mode, select the
following icon in the toolbar.
a
•You can also change the interactive mode by doing the following:
- Pressing the [Pen Mode] button on the remote control.
- Switching to PC Free Annotation or PC Interactive in the Pen
Mode setting on the projector's Extended menu.
s Extended - Easy Interactive Function - Pen Mode p.135
•You can switch to computer interactive mode when you project the
computer screen.
•You cannot switch to computer interactive mode when the USB
Type B setting in the projector's Extended menu is set to Wireless
Mouse/USB Display.
•The computer screen is projected when you switch to computer
interactive mode from whiteboard mode.
•After changing to computer interactive mode, content drawn using
annotation mode is retained.
Interacting with the Screen
86
Annotation Mode and Whiteboard Mode Toolbars
The annotation mode toolbar or the whiteboard mode toolbar lets you draw
and write on the projected screen. The toolbar also lets you easily switch to
annotation or whiteboard mode.
In the following illustration, the annotation mode toolbar is shown on the
left, and the whiteboard mode toolbar on the right:
Switches to annotation mode.
Switches to whiteboard mode.
Undoes the last operation.
Redoes the last undo.
Selects a white or black background or one of four patterns
(whiteboard mode only).
s "Selecting Whiteboard Templates" p.89
Writes or draws free-form lines with custom pen.
Select the icon to change custom pen color and width.
s "Selecting Line Width and Color" p.88
Writes or draws free-form lines with a transparent highlighter
pen.
Select the icon to change highlighter pen color and width.
s "Selecting Line Width and Color" p.88
Black pen (fine point on left, thick on right).
Red pen (fine point on left, thick on right).
Blue pen (fine point on left, thick on right).
Eraser (thin width on left, thick on right).
Interacting with the Screen
87
Clears all drawings.
Hides the toolbar after each drawing.
Closes the toolbar.
Selecting Line Width and Color
You can select the color and line width for both the custom Pen and the
Highlighter tools.
a
Select the icon next to the custom Pen or Highlighter
annotation tool.
A box like the following appears:
b
Select the line width and color you want to use for the Pen or
Highlighter tools.
a
•As you hover over the color palette, the name of the color is
displayed at the bottom of the palette.
•You can change the shade of the color palette using the Color
Palette setting in the projector's Extended menu.
s Extended - Easy Interactive Function - General -
Advanced - Color Palette p.135
c
Select the or tool, then use the pen or your
finger (EB-595Wi) to write or draw on the projection surface.
Interacting with the Screen
88
a
When multiple people draw on the projected screen using the multiple
pens, you can select different colors and line widths for each pen.
When using touch operations, all users share the same color and line
width.
Selecting Whiteboard Templates
In whiteboard mode, you can change the background color, and insert
horizontal lines or a background template.
a
In whiteboard mode, select the icon.
The following box appears.
b
Select one of the template patterns.
Projector Control Toolbar
The projector control toolbar lets you control the projector from the
projected screen just as you would using the remote control.
If your network device is connected to the projector using EasyMP Multi
PC Projection, you can also use the toolbar to select the network device
from which you want to project.
Turns off the projector.
Changes the image source using the displayed list.
To close the image source list, select the icon at the
bottom of the list.
Zooms into and out of the image using the scale or the + and -
icons in the displayed list. You can do the following:
•The image can be enlarged to between 1 to 4 times. To return to
the original image size, select x1.
•You can expand and reduce quickly by holding down the + or -
icon.
To close the scale list, select the icon at the bottom of the
list.
Turns off picture and sound.
Tap the projected screen to turn the video and audio on.
s "Hiding the Image and Sound Temporarily (A/V Mute)"
p.102
Pauses video action.
s "Freezing the Image (Freeze)" p.102
Decreases the volume.
s "Adjusting the Volume" p.59
Interacting with the Screen
89
Increases the volume.
s "Adjusting the Volume" p.59
Closes the projection control toolbar.
Selecting Network Device Display from the Projector Control
Toolbar
If you have connected devices to the projector via a network, you can select
to project an image from those devices using the projector control toolbar.
You can select the image source from computers that are running EasyMP
Multi PC Projection, and smartphones or tablets that are running Epson
iProjection. You can change the projected screen by selecting from among
up to 50 devices.
a
You can select any connected network device for projection, even if
the user connected using the EasyMP Multi PC Projection software
with the moderator feature enabled. See the EasyMP Multi PC
Projection Operation Guide for details about the moderator feature.
s EasyMP Multi PC Projection Operation Guide
a
Select the icon on the projector control toolbar, and then
select Participant List from the image source list.
b
Select the user name for the device you want to project from.
ADisplays the user names for network devices connected to the projector.
The icon is shown next to the user name of the currently projected
device.
BCloses the user selection screen and returns to the previous screen.
CRefreshes the user list.
When an additional user connects to the projector via a network, select this
button to update the user list.
Interacting with the Screen
90
a
•When the selected device is disconnected from the projector,
the selected user's screen is not projected and the user list is
automatically updated.
•While the user selection screen is displayed, you cannot do
the following:
- Select a different image source
- Use other interactive features
- Control the projector from the projector control toolbar
- Connect to multiple projectors
- Hear sound from the projector (it is turned off temporarily)
- Change the settings using the projector's configuration menu
- Project an image using EasyMP Multi PC Projection or
Epson iProjection
You see the selected user's screen image.
When you change the user, repeat these steps.
a
•You cannot access the user selection screen when connecting to
multiple projectors by using EasyMP Multi PC Projection and
projecting the same image (mirroring).
•If the interactive features do not work, you can return to the
previous screen by pressing the [Esc] button on the remote control
or the control panel.
Interacting with the Screen
91
You can use your projector in computer interactive mode over a network.
If you want to annotate when using computer interactive mode over a
network, you need to use Easy Interactive Tools (or another annotation
program). Easy Interactive Tools allows you to use various drawing tools,
treat the drawing area as a page, and save your drawings as a file for a later
use. You can install Easy Interactive Tools from the EPSON Projector
Software for Easy Interactive Function CD. You can also download the
software from the Epson website.
•Use one of the following software applications to setup your projector
on a computer network and use computer interactive mode over the
network:
•EasyMP Network Projection version 2.85 or later (for Windows)
or 2.83 or later (for OS X)
See the EasyMP Network Projection Operation Guide for instruc‐
tions.
s EasyMP Network Projection Operation Guide
•Quick Wireless version 1.32 or later (Windows only)
See the instructions included with the optional Quick Wireless
Connection USB Key.
•With either application, select Use Interactive Pen on the General
settings tab and Transfer layered window on the Adjust performance
tab.
a
•You can only use one pen or one finger (EB-595Wi) at a time.
•The response may be slower over the network.
•When using computer interactive mode over a network, you cannot
change the Pen Mode setting using the remote control or from the
projector's Extended menu. The icon is also not available.
•You cannot change the Pen Operation Mode setting from the
projector's Extended menu.
•You can connect up to four projectors at one time using EasyMP
Network Projection. When connected to multiple projectors,
computer interactive mode functions for any projector. Operations
performed on one projector are reflected in other projectors.
•To use annotation mode over the network, clear Use Interactive Pen
on the General settings tab and Transfer layered window on the
Adjust performance tab in EasyMP Network Projection or Quick
Wireless Connection, and then reconnect to the network.
Precautions When Connecting to a Projector on a
Different Subnet
Follow these precautions when you connect to a projector on a different
subnet using EasyMP Network Projection and use interactive features:
•Search for the projector on the network by specifying the projector's IP
address. You cannot search for it by specifying the projector name.
•Make sure that you get an echo reply back from the network projector
when sending an echo request by the ping command. When the
Internet Control Message Protocol (ICMP) option is disabled on the
router, you can connect to the projector at remote locations even if you
cannot get the echo reply back.
Using the Interactive Features over a Network
92
•Make sure the following ports are opened.
Port Protocol Usage Communication
3620 TCP/UDP For connection and con‐
trol
Duplex
3621 TCP For transferring images Duplex
3629 TCP For controlling projector Duplex
•Make sure that the MAC address filtering and application filtering
options are disabled on the router.
•Make sure that Network Address Translation (NAT) technology is not
used in your network environment. With Internet VPN and IP-VPN,
you can connect to the network projector remotely when you meet the
above requirements.
•When bandwidth management is applied for communications between
locations, and EasyMP Network Projection goes over the controlled
bandwidth, you may not be able to connect to the projector at remote
locations.