Table of Contents
- Contents
- Guide to This Manual
- Important Instructions
- Part Names and Functions
- Guide to the Control Panel
- Loading Papers and CD/DVDs
- Printing
- Maintaining the Printer
- Solving Problems
- Adding or Replacing the Computer or Devices
- Connecting to a Printer that has been Connected to the Network
- Re-setting the Network Connection
- Connecting a Smart Device and Printer Directly (Wi-Fi Direct)
- About Wi-Fi Direct
- Connecting to an iPhone, iPad or iPod touch using Wi-Fi Direct
- Connecting to Android Devices using Wi-Fi Direct
- Connecting to Devices other than iOS and Android using Wi-Fi Direct
- Disconnecting Wi-Fi Direct (Simple AP) Connection
- Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID
- Checking the Network Connection Status
- Product Information
- Where to Get Help
- Technical Support Web Site
- Contacting Epson Support
- Before Contacting Epson
- Help for Users in Europe
- Help for Users in Taiwan
- Help for Users in Australia
- Help for Users in New Zealand
- Help for Users in Singapore
- Help for Users in Thailand
- Help for Users in Vietnam
- Help for Users in Indonesia
- Help for Users in Hong Kong
- Help for Users in Malaysia
- Help for Users in India
- Help for Users in the Philippines
Epson SC-P900 User Manual
Displayed below is the user manual for SC-P900 by Epson which is a product in the Photo Printers category. This manual has pages.
Related Manuals
User's Guide
NPD6353-01 EN
Contents
Guide to This Manual
Introduction to the Manuals...................6
Guide to Video Manuals......................6
Searching for Information....................6
Printing Only the Pages You Need.............. 7
About is Manual......................... 7
Marks and Symbols.......................7
Notes on Screenshots and Illustrations.........8
Operating System References................8
Trademarks...............................8
Copyright................................9
Important Instructions
Safety Instructions.........................11
Safety Instructions for Ink................. 11
Printer Advisories and Warnings.............. 12
Advisories and Warnings for Setting Up the
Printer................................12
Advisories and Warnings for Using the Printer. . 12
Advisories and Warnings for Using the
Printer with a Wireless Connection...........13
Advisories and Warnings for Using the
Touchpad............................. 13
Advisories and Warnings for Transporting or
Storing the Printer.......................13
Protecting Your Personal Information...........14
Part Names and Functions
Front...................................16
Rear................................... 17
Opening the Port Cover...................18
Guide to the Control Panel
Home Screen Conguration..................20
Internal Light...........................21
Guide to the Network Icon.................21
Switching the Screen View...................22
Entering Characters........................24
Loading Papers and CD/DVDs
Loading Paper............................26
Paper Handling Precautions................26
Paper Loading Precautions.................27
Paper Size and Type Settings................27
Loading Paper in the Rear Paper Feeder.......29
Loading Paper in the Front Paper Feeder.......31
Loading Roll Paper.......................33
Loading a CD/DVD........................35
Printable CD/DVDs......................35
CD/DVD Handling Precautions.............35
Loading a CD/DVD......................36
Removing a CD/DVD.................... 37
Printing
Printing Photos...........................40
Tips when Printing Photo Projects...........40
Printing with Epson Print Layout............41
Printing Using the Application and Printer
Driver................................48
Printing Varieties (Windows)...............53
Printing Varieties (Mac OS)................58
Printing Using Epson Photo+...............63
Printing Information About Photo Printing. . . . .66
Printing Documents........................67
Printing from a Computer - Windows.........67
Printing from a Computer - Mac OS..........87
Printing Documents from Smart Devices (iOS). . 95
Printing Documents from Smart Devices
(Android).............................96
Printing Using a Cloud Service................98
Registering to Epson Connect Service from
the Control Panel........................98
Maintaining the Printer
Checking the Status of Consumables...........100
Checking the Status of Consumables
(Control Panel)........................ 100
Checking the Status of Consumables
(Windows)............................100
Checking the Status of Consumables (Mac OS). 100
Improving Paper Feeding Problems (Rear Paper
Feeder)................................100
Improving Print Quality....................101
Checking and Cleaning the Print Head.......101
Running Power Cleaning.................103
Preventing nozzle clogging................105
Aligning the Print Head..................105
Cleaning the Paper Path for Ink Smears.......105
Saving Power............................106
2
Installing or Uninstalling Applications Separately. 106
Installing the Applications Separately........ 106
Adding the Printer (for Mac OS Only)........109
Uninstalling Applications.................109
Updating Applications and Firmware. . . . . . . . 110
Transporting and Storing the Printer...........111
Solving Problems
e Printer Does Not Work as Expected........115
e Printer Does Not Turn On or O........115
Paper Does Not Feed Properly. . . . . . . . . . . . . 115
Cannot Print..........................119
Cannot Operate the Printer as Expected. . . . . . 136
A Message is Displayed on the LCD Screen. . . . . . 138
Paper Gets Jammed.......................139
Preventing Paper Jams...................139
It is Time to Replace the Ink Cartridges.........140
Ink Cartridge Handling Precautions.........140
Replacing Ink Cartridge..................141
It is Time to Replace the Maintenance Box. . . . . . .142
Maintenance Box Handling Precautions. . . . . . 142
Replacing a Maintenance Box..............142
Print Quality is Poor.......................143
Color Missing, Banding, or Unexpected
Colors Appear in Printout.................143
Blurry Prints, Vertical Banding, or
Misalignment..........................143
Printout Comes Out as a Blank Sheet. . . . . . . . 144
Paper Is Smeared or Scued...............145
Printed Photos are Sticky.................146
Images or Photos are Printed in Unexpected
Colors...............................146
Colors in the Printout Dier from ose on
the Display............................147
Cannot Print Without Margins.............147
Edges of the Image are Cropped During
Borderless Printing......................148
e Position, Size, or Margins of the Printout
Are Incorrect..........................148
Printed Characters Are Incorrect or Garbled. . . 149
e Printed Image Is Inverted..............150
Mosaic-Like Patterns in the Prints...........150
Vertical lines Appears on Roll Paper.........150
Cannot Solve Problem.....................151
Cannot Solve Printing Problems............151
Adding or Replacing the Computer or
Devices
Connecting to a Printer that has been
Connected to the Network..................154
Using a Network Printer from a Second
Computer............................154
Using a Network Printer from a Smart Device. . 155
Re-setting the Network Connection........... 155
When Replacing the Wireless Router.........155
When Changing the Computer.............156
Changing the Connection Method to the
Computer............................157
Making Wi-Fi Settings from the Control Panel. .159
Connecting a Smart Device and Printer Directly
(Wi-Fi Direct)...........................162
About Wi-Fi Direct..................... 162
Connecting to an iPhone, iPad or iPod touch
using Wi-Fi Direct......................163
Connecting to Android Devices using Wi-Fi
Direct...............................165
Connecting to Devices other than iOS and
Android using Wi-Fi Direct...............167
Disconnecting Wi-Fi Direct (Simple AP)
Connection...........................170
Changing the Wi-Fi Direct (Simple AP)
Settings Such as the SSID.................170
Checking the Network Connection Status.......171
Checking the Network Connection Status
from the Control Panel...................172
Printing a Network Connection Report. . . . . . . 172
Printing a Network Status Sheet............ 178
Product Information
Paper Information........................180
Available Paper and Capacities.............180
Unavailable Paper Types..................188
Printing to Paper Types Other than Genuine
Paper................................188
Consumable Products Information............193
Ink Cartridge Codes for SC-P900 Series. . . . . . 193
Ink Cartridge Codes for SC-P700 Series. . . . . . 194
Maintenance Box Code...................196
Soware Information......................196
Soware for Printing.................... 196
Soware for Making Settings or Managing
Devices..............................201
Soware for Updating................... 202
Settings Menu List........................203
Screen Customization....................203
3
Printer Settings........................ 203
Basic Settings..........................204
Network Settings.......................205
Web Service Settings.................... 206
Customer Research..................... 207
Restore Default Settings..................207
Printer Status/Print..................... 207
Firmware Update.......................208
Product Specications..................... 208
Printer Specications....................208
Interface Specications...................211
Network Specications...................211
Supported ird Party Services.............213
Dimensions...........................214
Electrical Specications.................. 214
Environmental Specications..............215
Installation Location and Space.............216
System Requirements....................217
Regulatory Information....................217
Standards and Approvals................. 217
Restrictions on Copying..................218
Where to Get Help
Technical Support Web Site..................221
Contacting Epson Support..................221
Before Contacting Epson................. 221
Help for Users in Europe..................221
Help for Users in Taiwan..................221
Help for Users in Australia................222
Help for Users in New Zealand.............222
Help for Users in Singapore............... 223
Help for Users in ailand................ 223
Help for Users in Vietnam................ 224
Help for Users in Indonesia................224
Help for Users in Hong Kong..............226
Help for Users in Malaysia................ 226
Help for Users in India...................226
Help for Users in the Philippines............227
4
Guide to This Manual
Introduction to the Manuals...........................................6
Guide to Video Manuals..............................................6
Searching for Information.............................................6
Printing Only the Pages You Need.......................................7
About is Manual..................................................7
Trademarks....................................................... 8
Copyright.........................................................9
Introduction to the Manuals
e following manuals are supplied with your Epson printer. As well as the manuals, check the various types of
help information available from the printer itself or from the Epson soware applications.
❏Start Here (paper manual)
Provides you with information on setting up the printer, installing the soware, using the printer, solving
problems, and so on.
To obtain the latest version, visit the Epson Europe support website at http://www.epson.eu/Support, or the
Epson worldwide support website at http://support.epson.net/ .
❏User's Guide (digital manual)
is manual. is manual is available as PDF and Web manuals. Provides overall information and instructions
on using the printer, on network settings when using the printer on a network, and on solving problems.
To view the Web manual, visit the following website, enter the product name, and then go to Support.
http://epson.sn
Guide to Video Manuals
You can view video manuals to learn how to connect to the printer over Wi-Fi, or how to use the soware. Access
the following website. e contents of the video manuals are subject to change without prior notice.
SC-P900 Series: https://support.epson.net/p_doc/785/
SC-P700 Series: https://support.epson.net/p_doc/784/
Searching for Information
e PDF manual allows you to search for information you are looking for by keyword, or jump directly to specic
ections using the bookmarks. is section explains how to use a PDF manual that has been opened in Adobe
Reader X on your computer.
Searching by keyword
Click Edit > Advanced Search. Enter the keyword (text) for information you want to nd in the search window,
and then click Search. Hits are displayed as a list. Click one of the displayed hits to jump to that page.
Guide to This Manual
>
Searching for Information
6
Jumping directly from bookmarks
Click a title to jump to that page. Click + or > to view the lower level titles in that section. To return to the previous
page, perform the following operation on your keyboard.
❏Windows: Hold down Alt. and then press ←.
❏Mac OS: Hold down the command key, and then press ←.
Printing Only the Pages You Need
You can extract and print only the pages you need. Click Print in the File menu, and then specify the pages you
want to print in Pages in Pages to Print.
❏To specify a series of pages, enter a hyphen between the start page and the end page.
Example: 20-25
❏To specify pages that are not in series, divide the pages with commas.
Example: 5, 10, 15
About This Manual
is section explains the meaning of marks and symbols, notes on descriptions, and operating system reference
information used in this manual.
Marks and Symbols
!
Caution:
Instructions that must be followed carefully to avoid bodily injury.
Guide to This Manual
>
About This Manual
>
Marks and Symbols
7
c
Important:
Instructions that must be observed to avoid damage to your equipment.
Note:
Provides complementary and reference information.
Related Information
&Links to related sections.
Notes on Screenshots and Illustrations
❏Screenshots of the printer driver are from Windows 10 or macOS High Sierra. e content displayed on the
screens varies depending on the model and situation.
❏Illustrations used in this manual are examples only. Although there may be slight dierences depending on
themodel, the method of operation is the same.
❏Some of the menu items on the LCD screen vary depending on the model and settings.
❏You can read the QR code using dedicated app.
Operating System References
Windows
In this manual, terms such as "Windows 10", "Windows 8.1", "Windows 8", and "Windows 7" refer to the following
operating systems. Additionally, "Windows" is used to refer to all versions.
❏Microso
®
Windows
®
10 operating system
❏Microso
®
Windows
®
8.1 operating system
❏Microso
®
Windows
®
8 operating system
❏Microso
®
Windows
®
7 operating system
Mac OS
In this manual, "Mac OS" is used to refer to macOS Catalina, macOS Mojave, macOS High Sierra, macOS Sierra,
OS X El Capitan, OS X Yosemite, and OS X Mavericks.
Trademarks
❏EPSON
®
is a registered trademark, and EPSON EXCEED YOUR VISION or EXCEED YOUR VISION is a
trademark of Seiko Epson Corporation.
❏QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.
❏Microso
®
, Windows
®
, and Windows Vista
®
are registered trademarks of Microso Corporation.
❏Apple, Mac, macOS, OS X, Bonjour, ColorSync, Safari, AirPrint, iPad, iPhone, iPod touch, and iTunes are
trademarks of Apple Inc., registered in the U.S. and other countries.
Guide to This Manual
>
Trademarks
8
❏Use of the Works with Apple badge means that an accessory has been designed to work specically with the
technology identied in the badge and has been certied by the developer to meet Apple performance
standards.
❏Chrome, Google Play, and Android are trademarks of Google LLC.
❏Adobe, Adobe RGB, Lightroom, Photoshop, and Photoshop Elements are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and/or other countries.
❏e SuperSpeed USB Trident Logo is a registered trademark of USB Implementers Forum, Inc.
❏Firefox is a trademark of the Mozilla Foundation in the U.S. and other countries.
❏Mopria® and the Mopria® Logo are registered and/or unregistered trademarks and service marks of Mopria
Alliance, Inc. in the United States and other countries. Unauthorized use is strictly prohibited.
❏General Notice: Other product names used herein are for identication purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
Copyright
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of
Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained
herein. Neither is any liability assumed for damages resulting from the use of the information herein. e
information contained herein is designed only for use with this Epson product. Epson is not responsible for any
use of this information as applied to other products.
Neither Seiko Epson Corporation nor its aliates shall be liable to the purchaser of this product or third parties for
damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or
abuse of this product or unauthorized modications, repairs, or alterations to this product, or (excluding the U.S.)
failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.
Seiko Epson Corporation and its aliates shall not be liable for any damages or problems arising from the use of
any options or any consumable products other than those designated as Original Epson Products or Epson
Approved Products by Seiko Epson Corporation.
Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that
occurs from the use of any interface cables other than those designated as Epson Approved Products by Seiko
Epson Corporation.
© 2020 Seiko Epson Corporation
e contents of this manual and the specications of this product are subject to change without notice.
Guide to This Manual
>
Copyright
9
Safety Instructions
Read and follow these instructions to ensure safe use of this printer. Make sure you keep this manual for future
reference. Also, be sure to follow all warnings and instructions marked on the printer.
❏Some of the symbols used on your printer are to ensure safety and proper use of the printer. Visit the following
Web site to learn the meaning of the symbols.
http://support.epson.net/symbols
❏Use only the power cord supplied with the printer and do not use the cord with any other equipment. Use of
other cords with this printer or the use of the supplied power cord with other equipment may result in re or
electric shock.
❏Be sure your AC power cord meets the relevant local safety standard.
❏Never disassemble, modify, or attempt to repair the power cord, plug, printer unit, or options by yourself, except
as specically explained in the printer's manuals.
❏Unplug the printer and refer servicing to qualied service personnel under the following conditions:
e power cord or plug is damaged; liquid has entered the printer; the printer has been dropped or the casing
damaged; the printer does not operate normally or exhibits a distinct change in performance. Do not adjust
controls that are not covered by the operating instructions.
❏Place the printer near a wall outlet where the plug can be easily unplugged.
❏Do not place or store the printer outdoors, near excessive dirt or dust, water, heat sources, or in locations
subject to shocks, vibrations, high temperature or humidity.
❏Take care not to spill liquid on the printer and not to handle the printer with wet hands.
❏Keep the printer at least 22 cm away from cardiac pacemakers. Radio waves from this printer may adversely
aect the operation of cardiac pacemakers.
❏If the LCD screen is damaged, contact your dealer. If the liquid crystal solution gets on your hands, wash them
thoroughly with soap and water. If the liquid crystal solution gets into your eyes, ush them immediately with
water. If discomfort or vision problems remain aer a thorough ushing, see a doctor immediately.
Safety Instructions for Ink
❏If ink contacts your skin, eyes, or mouth, take the following actions.
❏If ink gets on your skin, wash the area thoroughly with soap and water.
❏If ink gets into your eyes, ush them immediately with water. If discomfort or vision problems continue aer
a thorough ushing, see a doctor immediately.
❏If ink gets into your mouth, see a doctor right away.
❏Do not disassemble the ink cartridge and the maintenance box; otherwise ink may get into your eyes or on your
skin.
❏Do not shake ink cartridges too vigorously; otherwise ink may leak from the cartridge.
❏Keep ink cartridges and maintenance box out of the reach of children.
Important Instructions
>
Safety Instructions
>
Safety Instructions for Ink
11
Printer Advisories and Warnings
Read and follow these instructions to avoid damaging the printer or your property. Make sure you keep this
manual for future reference.
Advisories and Warnings for Setting Up the Printer
❏Do not block or cover the vents and openings in the printer.
❏When placing the printer on a desk that is easily scratched, place a desk mat or the like on the desk rst before
placing the printer.
❏Use only the type of power source indicated on the printer's label.
❏Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and o.
❏Avoid electrical outlets controlled by wall switches or automatic timers.
❏Keep the entire computer system away from potential sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
❏e power-supply cords should be placed to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place
objects on top of the power-supply cords and do not allow the power-supply cords to be stepped on or run over.
Be particularly careful to keep all the power-supply cords straight at the ends and the points where they enter
and leave the transformer.
❏If you use an extension cord with the printer, make sure that the total ampere rating of the devices plugged into
the extension cord does not exceed the cord's ampere rating. Also, make sure that the total ampere rating of all
devices plugged into the wall outlet does not exceed the wall outlet's ampere rating.
❏If you plan to use the printer in Germany, the building installation must be protected by a 10 or 16 amp circuit
breaker to provide adequate short-circuit protection and over-current protection for the printer.
❏When connecting the printer to a computer or other device with a cable, ensure the correct orientation of the
connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation
may damage both devices connected by the cable.
❏Place the printer on a at, stable surface that extends beyond the base of the printer in all directions. e printer
will not operate properly if it is tilted at an angle.
❏Allow space above the printer so that you can fully raise the printer cover.
❏Leave enough space in front of the printer for the paper to be fully ejected.
❏Avoid places subject to rapid changes in temperature and humidity. Also, keep the printer away from direct
sunlight, strong light, or heat sources.
Advisories and Warnings for Using the Printer
❏Do not insert objects through the slots in the printer.
❏Do not put your hand inside the printer during printing.
❏Do not touch the white at cable inside the printer.
❏Do not use aerosol products that contain ammable gases inside or around the printer. Doing so may cause re.
❏Do not move the print head by hand; otherwise, the printer may be damaged.
Important Instructions
>
Printer Advisories and Warnings
>
Advisories and Warnings for Using the Printer
12
❏Always turn the printer o using the
P
button. Do not unplug the printer or turn o the power at the outlet
until the
P
light stops ashing.
❏If you are not going to use the printer for a long period, be sure to unplug the power cord from the electrical
outlet.
Advisories and Warnings for Using the Printer with a Wireless
Connection
❏Radio waves from this printer may negatively aect the operation of medical electronic equipment, causing
them to malfunction. When using this printer inside medical facilities or near medical equipment, follow
directions from the authorized personnel representing the medical facilities, and follow all posted warnings and
directions on the medical equipment.
❏Radio waves from this printer may negatively aect the operation of automatically controlled devices such as
automatic doors or re alarms, and could lead to accidents due to malfunction. When using this printer near
automatically controlled devices, follow all posted warnings and directions on these devices.
Advisories and Warnings for Using the Touchpad
❏e touchpad only responds when touched directly with your nger.
❏e touchpad may not respond if your ngers are wet, if you are wearing gloves, or if there is a protective sheet
or sticker on the touchpad.
❏Do not use sharp objects such us a ballpoint pen or mechanical pencil to perform operations. e touchpad
may be damaged.
❏If the touchpad gets dirty, wipe it with a so cloth. If it is very dirty, dip a so cloth in a solution diluted with
neutral detergent, squeeze it well, wipe o the dirt, and then wipe it with a so dry cloth. Do not use volatile
chemicals such as thinner, benzene, or alcohol. e surface of the touchpad may be damaged.
❏Avoid locations subject to rapid changes in temperature and humidity. Condensation will form inside the
touchpad, and may cause performance to deteriorate.
❏e LCD screen may contain a few small bright or dark spots, and because of its features it may have an uneven
brightness. ese are normal and do not indicate that it is damaged in any way.
❏Do not press the touchpad with too much force or subject it to heavy impacts. e touchpad could break.
Contact your dealer if the touchpad surface chips or cracks, and do not touch or attempt to remove the broken
pieces.
Advisories and Warnings for Transporting or Storing the Printer
❏When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏Before transporting the printer, make sure that the print head is in the home (far right) position.
Important Instructions
>
Printer Advisories and Warnings
>
Advisories and Warnings for Transporting or Stori
…
13
Protecting Your Personal Information
When you give the printer to someone else or dispose of it, erase all the personal information stored in the printer's
memory by selecting > General Settings > Restore Default Settings > Clear All Data and Settings on the
control panel.
Important Instructions
>
Protecting Your Personal Information
14
Front
ARear paper feeder Loads paper.
BEdge guide Feeds the paper straight into the printer. Slide to the edges of the paper.
CPrinter cover Open to replace the ink cartridges or to remove jammed paper.
DFront cover Open when sliding out the front paper feeder and output tray or replacing
the maintenance box.
EEdge guide Feeds the paper straight into the printer. Slide to the edges of the paper.
Do not slide the edge guide below the A4-size mark on the front paper
feeder. Otherwise, the edge guide could be damaged.
FOutput tray Holds the ejected paper.
GFront paper feeder Loads ne art media, poster board, or the CD/DVD tray.
HMaintenance box cover Open when replacing the maintenance box. The maintenance box is a
container that collects a very small amount of surplus ink during cleaning or
printing.
IControl panel Allows you to make settings and perform operations on the printer. Also
displays the printer’s status.
Press the control panel with your thumb and pull it with your other nger to
change the angle of the control panel.
J
P
(Power button/light) Turns the printer on or o. Unplug the power cord after checking that the
power light is o.
Part Names and Functions
>
Front
16
Rear
SC-P900 Series
ALAN port Connects a LAN cable.
BUSB port Connects a USB cable.
CPort cover Open to connect a USB cable or LAN cable. See the related information link
below for details on how to open the cover.
“Opening the Port Cover” on page 18
DAC inlet Connects the power cord.
ERear cover Open to install the optional roll paper unit.
SC-P700 Series
ALAN port Connects a LAN cable.
BUSB port Connects a USB cable.
CPort cover Open to connect a USB cable or LAN cable. See the related information link
below for details on how to open the cover.
“Opening the Port Cover” on page 18
Part Names and Functions
>
Rear
17
DAC inlet Connects the power cord.
ERoll paper unit Loads roll paper.
FRear cover Open to load roll paper.
GEdge guide Feeds the paper straight into the printer. Slide to the edges of the paper.
Opening the Port Cover
Open the rear paper feeder and then open the port cover.
Part Names and Functions
>
Rear
>
Opening the Port Cover
18
Home Screen Conguration
ADisplays the Menu screen. You can make settings related to printer features and operations.
BDisplays the Print Information Sheet screen. You can check the last 12 print histories. For
example, if you print three copies of a photo, the printer saves three print histories. See the
related link information for details on how to print the photo information sheet.
CAllows you to turn on or o the printer's interior light.
Indicates the light is on.
Indicates the light is o.
DAllows you to switch the view of the home screen and the printing screen. See the related link
information for more details.
EDisplays the Maintenance screen. Displays the menus recommended to improve the quality of
your printouts such as unclogging nozzles by printing a nozzle check pattern and performing
head cleaning, and improving blurring or banding in your printouts by aligning the print head.
FDisplays the network connection status. See the following for more details.
“Guide to the Network Icon” on page 21
GDisplays the Printer Status screen. The number displayed indicates the number of notications.
HDisplays the printer status.
IDisplays the paper settings.
JDisplays the Supply Status screen. You can check the approximate ink levels and the
approximate service life of the maintenance box.
Guide to the Control Panel
>
Home Screen Conguration
20
KYou can eject paper that has been loaded.
The following can be performed when roll paper is loaded.
❏Move roll paper to the cutting position.
❏Eject paper after moving the roll paper to the cutting position.
❏Eject roll paper
LDisplays the Paper Setting screen. You can select the paper size and paper type by selecting
Paper Setting when paper is loaded.
Related Information
&“Switching the Screen View” on page 22
&“Printing Information About Photo Printing” on page 66
Internal Light
When printing starts, the internal light turns on allowing you to view printing as it happens through the printer
cover. To turn o the light, make settings from the home screen as described below.
> General Settings > Basic Settings > Inside Light > Manual
You can also turn the light on or o by selecting on the home screen.
Guide to the Network Icon
The printer is not connected to a wired (Ethernet) network or unset it.
The printer is connected to a wired (Ethernet) network.
The printer is not connected to a wireless (Wi-Fi) network.
The printer is searching for SSID, unset IP address, or having a problem with a wireless
(Wi-Fi) network.
Guide to the Control Panel
>
Home Screen Conguration
>
Guide to the Network Icon
21
The printer is connected to a wireless (Wi-Fi) network.
The number of bars indicates the signal strength of the connection. The more bars
there are, the stronger the connection.
The printer is not connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP)
mode.
The printer is connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.
Switching the Screen View
When you select while the home screen or printing screen is displayed, the screen view is switched.
Home screen
Standard mode
Consumables infomation mode
You can check the approximate ink levels and the approximate service life of the maintenance box.
Printing screen
Photo display mode
Guide to the Control Panel
>
Switching the Screen View
22
Displays thumbnails of images when you print using the printer driver and Epson Print Layout.
Print status display mode
Displays ink levels and a progress bar when printing.
Print setting display mode
Displays print settings for the printer driver and Epson Print Layout.
Guide to the Control Panel
>
Switching the Screen View
23
Entering Characters
You can enter characters and symbols by using on-screen keyboard when you make network settings, and so on.
AIndicates the character count.
BMoves the cursor to the input position.
CSwitches between upper case and lower case or numbers and symbols.
DSwitches the character type.
: You can enter numbers and symbols.
: You can enter letters.
EEnters frequently used email domain addresses or URLs by simply selecting the item.
FEnters a space.
GEnters character.
HDeletes a character to the left.
Guide to the Control Panel
>
Entering Characters
24
Loading Paper
Paper Handling Precautions
Note the following points when handling and storing the paper. If the paper is not in good condition, print quality
may decline.
Check the manuals supplied with each paper.
Handling Precautions
❏Use Epson special media under normal room conditions (temperature: 15 to 25˚C; humidity: 40 to 60%).
❏Do not fold the paper or scratch the surface of the paper.
❏Avoid touching the printable surface of the paper with your bare hands. Moisture and oils from your hands can
aect print quality.
❏Paper may be wavy or slack if the temperature and humidity change. Be careful not to scratch or soil the paper,
and atten it before loading it in the printer.
❏Do not wet the paper.
❏Do not throw away the paper packaging as you can use it for storing the paper.
❏Avoid locations that are subject to direct sunlight, excessive heat, or humidity.
❏Keep paper in their original package aer opening, and keep them in a at place.
Printed Paper Handling Precautions
To maintain long lasting, high quality print results, note the following points.
❏Do not rub or scratch the printed surface. If they are rubbed or scratched, the ink may peel o.
❏Do not touch the printed surface; otherwise, the ink may peel o.
❏Make sure the print outs are completely dry before folding of stacking; otherwise, the color may change where
they touch (leaves a mark). ese marks will disappear if they are separated immediately and dried; however,
they will remain if not separated.
❏If you put the print outs in an album before they are completely dry, they may be blurred.
❏Do not use a dryer to dry the print outs.
❏Avoid direct sunlight.
❏Prevent color distortion while displaying or storing the print outs by following the instructions in the paper’s
manual.
❏To keep your printouts from discoloring, store them in a dark place, away from high temperatures, high
humidity, and direct sunlight.
Loading Papers and CD/DVDs
>
Loading Paper
>
Paper Handling Precautions
26
Note:
Typically, print outs and photos fade over time (color distortion) due to the eects of light and various constituents in the air.
is also applies to Epson special media. However, with the correct storage method, the degree of color distortion can be
minimized.
❏See the manuals supplied with Epson special media for detailed information on handling the paper aer printing.
❏e colors of photos, posters, and other printed materials appear dierent under dierent lighting conditions (light
sources
*
). e colors of print outs from this printer may also appear dierent under dierent light sources.
* Light sources include sunlight, uorescent light, incandescent light, and other types.
Paper Loading Precautions
is printer has three paper sources. Load paper of the appropriate size and type to suit your printing needs.
ARear paper feeder Normally, load paper in the rear paper feeder. (Except for roll paper, poster board, or paper
that is over 0.5 mm thick.)
BFront paper feeder Load paper into the front paper feeder when printing on poster board or paper that is
over 0.5 mm thick, or when you are unable to feed commercially available ne art paper
from the rear paper feeder.
CRoll paer unit Load roll paper into the roll paper unit. For the SC-P700 Series, roll paper unit is stored in
the rear of the printer. For the SC-P900 Series, use an optional roll paper unit.
Paper Size and Type Settings
If you register the paper size and type on the screen displayed when you load the paper, the printer informs you
when the registered information and print settings dier. is prevents you from wasting paper and ink by making
Loading Papers and CD/DVDs
>
Loading Paper
>
Paper Size and Type Settings
27
sure you are not printing on the wrong paper size or printing in the wrong color due to using settings that do not
match the paper type.
If displayed paper size and type dier from the loaded paper, select the item to change. If the settings match the
loaded paper, close the screen.
List of Paper Types
To obtain optimum printing results, select the paper type that suits the paper. When using commercially available
paper other than genuine Epson paper, select the paper type that closest to that paper.
Media Name Media Type
Control Panel Printer Driver
Bright White Ink Jet Paper Plain paper Plain Paper / Bright White Paper
Premium Glossy Photo Paper Prem. Glossy Epson Premium Glossy
Premium Semigloss Photo Paper Prem. Semigloss Epson Premium Semigloss
Photo Paper Glossy Glossy Photo Paper Glossy
Watercolor Paper - Radiant White Watercolor Paper Radiant White Watercolor Paper Radiant White
Velvet Fine Art Paper Velvet Fine Art Paper Velvet Fine Art Paper
UltraSmooth Fine Art Paper Epson UltraSmooth Fine Art paper UltraSmooth Fine Art Paper
Matte Paper-Heavyweight
Archival Matte Paper
Archival Matte Epson Archival Matte
Photo Quality Ink Jet Paper Photo Quality Ink Jet Epson Photo Quality Ink Jet
Epson Proong Paper White Semimatte Proong Semimatte Epson Proong Paper White
Semimatte
Premium Glossy Photo Paper (250) Prem. Glossy Epson Premium Glossy
Premium Semigloss Photo Paper (250) Prem. Semigloss Epson Premium Semigloss
Premium Luster Photo Paper (260) Prem. Luster Premium Luster Photo Paper
Loading Papers and CD/DVDs
>
Loading Paper
>
Paper Size and Type Settings
28
Media Name Media Type
Control Panel Printer Driver
Premium Semimatte Photo Paper (260) Prem. Semigloss Epson Premium Semigloss
Enhanced Matte Paper Archival Matte Epson Archival Matte
Plain Paper (cut sheets) Plain paper Plain Paper / Bright White Paper
Loading Paper in the Rear Paper Feeder
1. Open and slide out the rear paper feeder to its maximum position.
c
Important:
Be careful not to trap your ngers at the points shown in the illustration.
Loading Papers and CD/DVDs
>
Loading Paper
>
Loading Paper in the Rear Paper Feeder
29
2. Slide out the edge guides.
3. Load paper with the printable side facing up.
4. Slide the parts of the edge guides indicated by (a) to the edges of the paper.
5. e paper setting screen is displayed on the printer's control panel.
Select the paper size and paper type and then select OK. When using commercially available paper other than
genuine Epson paper, select the paper type that closest to that paper.
Loading Papers and CD/DVDs
>
Loading Paper
>
Loading Paper in the Rear Paper Feeder
30
Note:
If you have registered paper information to your printer, the printer informs you if the registered information and the
print settings dier. is prevents you from making the misprints.
If you have not used the register function, select > General Settings > Printer Settings, and then disable the Paper
Setup Auto Display setting. If you disable this setting, some functions will be unavailable. See Related Information for
more details.
6. Open the front cover.
7. Slide out the output tray to its maximum position.
c
Important:
To avoid paper jams, make sure you open the front paper feeder and extend the output tray before printing.
Related Information
&“Paper Mismatch:” on page 204
&“Available Paper and Capacities” on page 180
&“Paper Size and Type Settings” on page 27
Loading Paper in the Front Paper Feeder
You can load paper into the front paper feeder by referring to the animations displayed on the printer's control
panel.
Loading Papers and CD/DVDs
>
Loading Paper
>
Loading Paper in the Front Paper Feeder
31
Paper sticks out from the rear of the printer when it is loaded from the front paper feeder. Leave a space (A)
between the rear of the printer and the nearest wall as shown in the gure.
SC-P900 Series: 405 mm or above
SC-P700 Series: 330 mm or above
c
Important:
❏An error may occur if you perform the following operations during initialization movement.
- Extend the front paper feeder.
- Load poster board.
❏Inserting paper from the rear may cause a malfunction or error.
1. Select Paper Setting on the printer's control panel.
2. Select Front Paper Feeder - Fine Art or Front Paper Feeder - Poster Board.
Loading Papers and CD/DVDs
>
Loading Paper
>
Loading Paper in the Front Paper Feeder
32
3. Pull out the front paper feeder by referring to the animations displayed on the screen.
Load paper by referring to the animations displayed on the screen.
4. e paper setting screen is displayed on the printer's control panel.
Select the paper size and paper type and then select OK. When using commercially available paper other than
genuine Epson paper, select the paper type that closest to that paper.
Note:
If you have registered paper information to your printer, the printer informs you if the registered information and the
print settings dier. is prevents you from making the misprints.
If you have not used the register function, select > General Settings > Printer Settings, and then disable the Paper
Setup Auto Display setting. If you disable this setting, some functions will be unavailable. See Related Information for
more details.
Related Information
&“Paper Mismatch:” on page 204
&“Available Paper and Capacities” on page 180
&“Paper Size and Type Settings” on page 27
Loading Roll Paper
You can load a roll paper by referring to the animations displayed on the printer's control panel.
1. Select Paper Setting on the printer's control panel.
Loading Papers and CD/DVDs
>
Loading Paper
>
Loading Roll Paper
33
2. Select Roll Paper.
3. Pull out the roll paper unit by referring to the animations displayed on the screen.
Load the roll paper by referring to the animations displayed on the screen.
4. e paper setting screen is displayed on the printer's control panel.
Select the paper size and paper type and then select OK. When using commercially available paper other than
genuine Epson paper, select the paper type that closest to that paper.
Note:
If you have registered paper information to your printer, the printer informs you if the registered information and the
print settings dier. is prevents you from making the misprints.
If you have not used the register function, select > General Settings > Printer Settings, and then disable the Paper
Setup Auto Display setting. If you disable this setting, some functions will be unavailable. See Related Information for
more details.
Related Information
&“Paper Mismatch:” on page 204
&“Available Paper and Capacities” on page 180
&“Paper Size and Type Settings” on page 27
Cutting and Removing the Roll Paper
Aer printing on the roll paper, follow the steps below to remove the roll paper.
1. Select Cut/Eject on the printer's control panel.
Loading Papers and CD/DVDs
>
Loading Paper
>
Loading Roll Paper
34
2. Select Cut and Eject.
e roll paper is moved to the cutting position.
3. Cut the ejected paper using scissors.
4. Select Done.
5. Open the roll paper unit. (Only for SC-P900 Series users)
6. Remove the roll paper.
Loading a CD/DVD
Printable CD/DVDs
You can print on a circular 12-cm CD/DVD labelled as suitable for printing, for example "printable on the label
surface" or "printable with ink jet printers."
You can also print on Blu-ray Discs™.
CD/DVD Handling Precautions
❏See the documentation provided with your CD/DVD for more information on handling the CD/DVD or
writing data.
❏Do not print on the CD/DVD before writing your data to it. If you do, ngerprints, dirt, or scratches on the
surface may cause errors while writing data.
❏Depending on the CD/DVD type or printing data, smearing may occur. Try making a test print on a spare CD/
DVD. Check the printed surface aer waiting for one full day.
❏Compared to printing on genuine Epson paper, the print density is lowered to prevent ink from smearing on the
CD/DVD. Adjust the print density as necessary.
❏Allow the printed CD/DVDs at least 24 hours to dry avoiding direct sunlight. Do not stack or insert the CD/
DVDs into your device until they are completely dry.
❏If the printed surface is sticky even aer it has dried, lower the print density.
❏Reprinting on the same CD/DVD may not improve the print quality.
Loading Papers and CD/DVDs
>
Loading a CD/DVD
>
CD/DVD Handling Precautions
35
❏If the disc tray or the internal transparent compartment are accidentally printed on, immediately wipe o the
ink.
❏Depending on the print area setting, the CD/DVD or disc tray may get dirty. Make settings to print on the
printable area.
❏You can set the print range for the CD/DVD to a minimum of 18 mm for the inner diameter, and a maximum
of 120 mm for the outer diameter. Depending on the settings, the CD/DVD or disc tray may be smeared. Set
within the print range for the CD/DVD you want to print.
Loading a CD/DVD
You can load the CD/DVD by referring to the animations displayed on the printer's control panel.
c
Important:
❏Do not turn the printer on or o while the tray is inserted. is could cause a malfunction.
❏Store the tray at. Malfunction could result if the tray is curled or deformed.
❏An error may occur if you perform the following operations during printing.
- Extend the front paper feeder.
- Load poster board.
❏Use the disk tray supplied with the printer. Using a dierent tray could damage the printer, tray, or disc or cause
printer malfunction.
❏Inserting the disk tray from the rear may cause a malfunction or error.
1. Select Paper Setting on the printer's control panel.
Loading Papers and CD/DVDs
>
Loading a CD/DVD
>
Loading a CD/DVD
36
2. Select Disc Tray.
3. Pull out the front paper feeder by referring to the animations displayed on the screen.
Load the CD/DVD by referring to the animations displayed on the screen.
Related Information
&“Available Paper and Capacities” on page 180
Removing a CD/DVD
1. When the disk tray is ejected aer printing, hold the end of the tray and pull it straight out.
Loading Papers and CD/DVDs
>
Loading a CD/DVD
>
Removing a CD/DVD
37
2. Store the front paper feeder.
3. Close the front cover.
c
Important:
Aer printing is nished, make sure you remove the disk tray. If you do not remove the tray and turn the
printer on or o, or run head cleaning, the disk tray will strike the print head and may cause the printer to
malfunction.
Note:
Select Remove on the printer's control panel to remove the disk tray without printing.
Loading Papers and CD/DVDs
>
Loading a CD/DVD
>
Removing a CD/DVD
38
Printing Photos
Tips when Printing Photo Projects
is section explains important points to note when creating photo projects.
Shooting (Camera Settings)
Creating a photo project begins with shooting. e data storage format and size (resolution) are also important
points.
Some items only need to be set for the rst time, while some items need to be set every time according to the
subject.
Items that only need to be set the rst time
❏Color spaces: Select sRGB if you are unsure.
❏Storage size: We recommend saving at a resolution that suits the paper size you will use for printing, using the
table below as a guide.
Print Size Number of Pixels
A2/entire sheet 24 million (5830 x 4120)
A3/half sheet 18 million (5050 x 3570)
A4/8x10 in/10x12 in 12 million (4120 x 2920)
❏Data format: We recommend selecting RAW when editing and printing photo data, or select JPEG just printing.
Items that need to be set every time
Set the following appropriately according to the subject.
❏Select A mode (aperture priority auto) from shooting mode and control the F value (aperture) to set the amount
of burring.
❏Exposure: Set an approximate value to avoid halation or black defects.
❏Shutter speed: Set the speed to avoid blurring.
❏ISO speed: We recommend setting this as low as possible.
❏White balance: Set an approximate setting according to the subject.
Raw Development and Editing (Printed Finish)
is process is as important as shooting to complete photo projects.
is allows you to edit photos (or perform color correction, gradation correction, cropping, and so on) with
applications
*
such as Adobe Photoshop or Lightroom, and save them in JPEG or TIFF format.
*You can also perform RAW development using the camera soware.
❏Adjust the color temperature to match the subject or the scene.
Printing
>
Printing Photos
>
Tips when Printing Photo Projects
40
❏Maintain a rich gradation and do not increase the intensity of red and yellow.
❏Adjust the black level and create a sharp photo.
Printing (Selecting the Paper and Print Settings Correctly)
You can create more attractive photos by selecting paper that suits the subject of the photo.
Most people think that glossy paper is the best for printing all photos, but there other textures available such as
semigloss and matte paper. ese provide a wide variety of nished photos.
Also, the so texture of ne art paper allows you to print photos that look like paintings.
e following pages introduce the characteristics and recommended uses of typical Genuine Epson paper.
“Available Paper and Capacities” on page 180
When you print a photo, select from the following three methods depending on your knowledge and purpose of
photo printing.
❏If you want to easily print photos that have been edited in an application (color correction and so on).
“Printing with Epson Print Layout” on page 41
❏If you want to print using an application or the printer driver.
“Printing Using the Application and Printer Driver” on page 48
❏If you want to print photos quickly and leave color reproduction to the printer.
“Printing Using Epson Photo+” on page 63
To bring the display color closer to the color of the printed material
e image on the display is expressed with the three primary colors of light (RGB), and the printed matter output
by the printer is expressed by the three primary colors (CMY) + K. erefore, it is dicult to strictly produce the
same color.
e following three points can help to bring the colors as close as possible.
❏Use a calibrated display
❏Check under a light that allows you to see the correct color of the photo
❏Set the color management settings
*
and print settings correctly
*Settings for matching colors displayed on dierent devices such as displays, digital cameras, and printers. When
you import photos taken with a digital camera and output them on the printer or display, each color may look
slightly dierent. is is because the color characteristics dier from device to device.
When printing using commercial paper
Add the paper information when you want to print easily using color matching on ordinary commercial paper.
“Printing to Paper Types Other than Genuine Paper” on page 188
Printing with Epson Print Layout
Epson Print Layout allows you to make print settings to be performed by the application and the printer driver on
one screen.
Printing
>
Printing Photos
>
Printing with Epson Print Layout
41
Summary of Epson Print Layout
Epson Print Layout is an application that allows you to print retouched or developed photos in a few easy steps. It
can also be used as a plug-in for Adobe Photoshop, Adobe Lightroom, Nikon ViewNX-i, and SILKYPIX. See the
Epson Print Layout manual for details on supported applications and data formats.
You can download Epson Print Layout from the Epson Web site.
Note:
You can download the manual for Epson Print Layout for iPad from the App Store. e manual for iPhone will be released
around July 2020. e release date is subject to change without notice.
Screen Composition
ACheck the print results using the selected settings before printing.
BSave your favorite print settings and use them repeatedly.
Printing
>
Printing Photos
>
Printing with Epson Print Layout
42
CSet the print layout.
You can also select multiple photo templates and special layouts.
Template
Panorama
Gallery Wrap
DSelect the color management method or Advanced B&W Photo print mode.
Making Print Settings
is section explains the procedure for printing one photo using a standard layout.
1. Start Epson Print Layout.
is section explains the procedure for starting directly from the photo to be printed.
See the Epson Print Layout manual for details on how to start from your applications.
Printing
>
Printing Photos
>
Printing with Epson Print Layout
43
❏Windows
Right-click the photo and select Send to > Epson Print Layout.
❏Mac OS
Click the photo to be printed while holding down the Ctrl key, and then select Open With > Epson Print
Layout.
2. Set the paper information and print quality from Printer Settings.
Make sure that your printer is selected and select the correct paper type, size, and paper source.
Load ne art paper in the Rear Paper Feeder except for some commercial paper (paper except for genuine
Epson paper).
Printing
>
Printing Photos
>
Printing with Epson Print Layout
44
Select Standard as the print quality. Standard is the mode with the best balance between image quality and
speed.
3. Set the print layout in Layout Settings.
ASelect Standard.
B❏When performing borderless printing
Select Borderless and Scale to Fit.
❏When adding a margin
Clear both checkboxes, and then set the following margin.
C❏Select Center.
❏Select Image Size or Margins and adjust the margin size.
❏Select Margin Color to change the color of the margins.
Printing
>
Printing Photos
>
Printing with Epson Print Layout
45
4. Set the color management method from Color Settings.
Set one of the following methods, and then click Print.
❏Manage color using the printer driver (this uses the recommended setting to make the best of the printer
color gamut
*
)
*Use the following setting method when using paper added in Epson Media Installer: Manage color using
an application.
ASelect Printer Manages Color.
BSelect Auto Select.
❏Manage color using an application (For users with knowledge of color management and specialized
equipment)
ASelect Use ICC Prole from Type. When you select Auto Select from Output ICC Prole, the ICC prole for
the paper selected in step 2 is set automatically.
BSelect Perceptual.
Printing Black and White Photos Easily
In Advanced B&W Photo, you can make adjustments while checking the results in the preview area to easily
create beautiful black and white print outs. e photo data itself can be either color or monochrome.
Printing
>
Printing Photos
>
Printing with Epson Print Layout
46
AColor Toning: Select your favorite black from the following four types.
❏Neutral: Standard black
❏Cool: Bluish black
❏Warm: Reddish black
❏Sepia: Brownish with a retro texture
Tone: You can adjust the modulation of black and white.
BYou can adjust the black tone.
❏When you make an adjustment, Color Toning above changes to Fine Adjustment. If you save and select
Save Custom Toning, you can print the same black and white tone next time.
❏Note that adjustments will be undone if you change Color Toning or Tone after making adjustments.
CSwitch on and o as needed.
On: Slightly adds color to the highlights of the image and reduces blown out highlights.
On (Full Page): The entire paper is coated with the adjusted color and the texture makes it look like it was
printed on light-colored paper.
Printing Using the Application and Printer Driver
Some features such as various layouts in Adobe Photoshop and advanced adjustments in the printer driver cannot
be realized with Epson Print Layout. In this case, you can make settings individually in the application and printer
driver. is section explains how to make color management settings in situations such as these.
Printing Using Color Management in Applications (Windows)
is is recommended when you want to print colors on the display correctly. You need the correct environmental
conditions such as screen calibration and surrounding lighting to view the correct print colors. e following two
points are important for color management settings.
❏Enable the color management settings in the application and disable those in the printer driver.
❏Select the ICC prole for the paper in the application and select the corresponding paper name in the printer
driver.
See the following for the paper names of genuine Epson paper and their corresponding ICC proles.
“Available Paper and Capacities” on page 180
1. Make settings in the application.
Setting example for Adobe Photoshop Elements 2020
Click More Options on the print screen.
Printing
>
Printing Photos
>
Printing Using the Application and Printer Driver
48
Select Color Management, and then select Photoshop Manages Colors from Color Handling. Select the ICC
prole of the paper from Printer Prole and click Printer Preferences.
2. Display the printer driver's setting screen.
3. Make the following settings on the Main tab.
❏Media Type: Select the paper name corresponding to the ICC prole selected as the Printer Prole in step
1.
❏Mode: Select O (No Color Adjustment).
Note:
For Windows 7, O (No Color Adjustment) is selected automatically.
4. Check other settings, and then start printing.
Printing Using Color Management in the Printer Driver (Windows)
is is recommended when you want to make the most of wide color spaces and the printer's gradation. is
reduces matching colors on the display. Color management set in the printer driver is not saved to the image data.
e following two points are important for color management settings.
❏Disable the color management settings in the application and enable those in the printer driver.
❏Set Mode to match the color space of the image (sRGB/Adobe RGB) to print in the printer driver.
1. When using applications featuring a color management function, specify how to adjust colors from these
applications.
When using applications without a color management function, start from step 2.
Depending on the type of the application, make the settings following the table below.
Application Color Management Settings
Adobe Photoshop CS3 or later
Adobe Photoshop Lightroom 1 or later
Adobe Photoshop Elements 6 or later
Printer Manages Colors
Printing
>
Printing Photos
>
Printing Using the Application and Printer Driver
49
Application Color Management Settings
Other applications No Color Management
Note:
For information on the operating systems supported by each application, visit the distributor’s website.
Setting example for Adobe Photoshop Elements 2020
Click More Options on the print screen.
Select Color Management, and then select Printer Manages Colors from Color Handling. Make a note of
what is displayed in the Image Space, and then click Printer Preferences.
2. On the printer driver's Main tab, select the Media Type and Mode option.
For the Mode, select either of the following depending on what you noted in step 1.
❏sRGB: EPSON Standard (sRGB)
❏Adobe RGB: Adobe RGB
To adjust manually, click Advanced to display the Color Controls screen.
Printing
>
Printing Photos
>
Printing Using the Application and Printer Driver
50
3. If you displayed the Color Controls screen in step 2, make settings for each item.
See the printer driver help for more details on each item.
Note:
You can adjust values while checking the sample image on the le of the screen. You can also make ne adjustments to
the color balance by using the color circle.
4. Check other settings, and then start printing.
Printing Using Color Management in Applications (Mac OS)
is is recommended when you want to print colors on the display correctly. You need the correct environmental
conditions such as screen calibration and surrounding lighting to view the correct print colors. e following two
points are important for color management settings.
❏Enable the color management settings in the application and disable those in the printer driver.
❏Select the ICC prole for the paper in the application and select the corresponding paper name in the printer
driver.
See the following for the paper names of genuine Epson paper and their corresponding ICC proles.
“Available Paper and Capacities” on page 180
1. Make settings in the application.
Setting example for Adobe Photoshop Elements 2020
Click More Options on the print screen.
Printing
>
Printing Photos
>
Printing Using the Application and Printer Driver
51
Select Color Management, and then select Photoshop Manages Colors from Color Handling. Select the ICC
prole of the paper from Printer Prole, click OK, and then click Print on the print screen.
2. On the printer driver's print dialog, select Print Settings from the pop-up menu.
3. Make the following settings.
❏Media Type: Select the paper name corresponding to the ICC prole selected as the Printer Prole in step 1
❏Color Settings: Select O (No Color Adjustment).
4. Check other settings, and then start printing.
Printing Using Color Management in the Printer Driver (Mac OS)
is is recommended when you want to make the most of wide color spaces and the printer's gradation. is
reduces matching colors on the display. Color management set in the printer driver is not saved to the image data.
e following two points are important for color management settings.
❏Disable the color management settings in the application and enable those in the printer driver.
❏Set Color Settings to match the color space of the image (sRGB/Adobe RGB) to print in the printer driver.
1. When using applications featuring a color management function, specify how to adjust colors from these
applications.
When using applications without a color management function, start from step 2.
Depending on the type of the application, make the settings following the table below.
Application Color Management Settings
Adobe Photoshop CS3 or later
Adobe Photoshop Lightroom 1 or later
Adobe Photoshop Elements 6 or later
Printer Manages Colors
Other applications No Color Management
Note:
For information on the operating systems supported by each application, visit the distributor’s website.
Printing
>
Printing Photos
>
Printing Using the Application and Printer Driver
52
Setting example for Adobe Photoshop Elements 2020
Click More Options on the print screen.
Select Color Management, and then select Printer Manages Colors from Color Handling. Make a note of
what is displayed in the Image Space, click OK, and then click Print on the print screen.
2. On the printer driver's print dialog, select Color Matching from the pop-up menu, and then click EPSON
Color Controls.
Note:
For the following applications, you need to make settings in step 1 to select EPSON Color Controls.
❏Adobe Photoshop CS3 or later
❏Adobe Photoshop Lightroom 1 or later
❏Adobe Photoshop Elements 6 or later
3. Select Print Settings from the pop-up menu, and then select Color Settings option.
For the Color Settings, select either of the following depending on what you noted in step 1.
❏sRGB: EPSON Standard (sRGB)
❏Adobe RGB: Adobe RGB
To adjust the value manually, click Advanced Color Settings.
4. Set each item in basic settings.
5. Check other settings, and then start printing.
Printing Varieties (Windows)
Printing Black and White Photos
You can print black and white photos with rich gradation by adjusting the image data color by the printer driver.
e original data is not aected.
You can correct image data when printing without processing the data from applications.
Printing
>
Printing Photos
>
Printing Varieties (Windows)
53
Note:
It is recommended that you use images with a color space of sRGB.
1. When using applications featuring a color management function, specify how to adjust colors from these
applications.
When using applications without a color management function, start from step 2.
Depending on the type of the application, make the settings following the table below.
Application Color Management Settings
Adobe Photoshop CS3 or later
Adobe Photoshop Lightroom 1 or later
Adobe Photoshop Elements 6 or later
Printer Manages Colors
Other applications No Color Management
Note:
For information on the operating systems supported by each application, visit the distributor’s website.
Setting example for Adobe Photoshop Elements 2020
Click More Options on the print screen.
Select Color Management, and then select Printer Manages Colors from Color Handling. Click Printer
Preferences.
2. Display the printer driver's Main tab and select Advanced B&W Photo as the Print Mode.
3. Click Advanced for Mode.
4. Make the settings for each item on the Color Controls screen.
See the printer driver help for more details on each item.
5. Check other settings, and then start printing.
Printing
>
Printing Photos
>
Printing Varieties (Windows)
54
Printing with Auto Color Correction
e printer driver for this printer comes with the Epson proprietary function PhotoEnhance that makes the most
ecient use of the color reproduction area, corrects image data to improve colors before printing.
By using PhotoEnhance, you can correct photo colors to match the subject types such as people, scenery, or night
view. You can print color data in sepia or black and white. Colors are automatically corrected simply by selecting
the print mode.
Note:
It is recommended that you use images with a color space of sRGB.
1. When using applications featuring a color management function, specify how to adjust colors from these
applications.
When using applications without a color management function, start from step 2.
Depending on the type of the application, make the settings following the table below.
Application Color Management Settings
Adobe Photoshop CS3 or later
Adobe Photoshop Lightroom 1 or later
Adobe Photoshop Elements 6 or later
Printer Manages Colors
Other applications No Color Management
Note:
For information on the operating systems supported by each application, visit the distributor’s website.
Setting example for Adobe Photoshop Elements 2020
Click More Options on the print screen.
Select Color Management, and then select Printer Manages Colors from Color Handling. Click Printer
Preferences.
2. Display the Main tab in the printer driver, select PhotoEnhance for Mode, and click Advanced.
Printing
>
Printing Photos
>
Printing Varieties (Windows)
55
3. On the PhotoEnhance screen, you can set eects to apply to the print data.
See the printer driver help for more details on each item.
4. Check other settings, and then start printing.
Printing Banners
You can print banners and panoramic pictures if you create and set print data for banner printing in your
application. When printing using document preparation soware, image editing soware, and so on, create print
data with the same length and width ratio as the size you want to print.
e following printing sizes are available.
Width SC-P900 Series: 431.8mm
SC-P700 Series: 330mm
Length
*
Max. 18m
*: The paper length can be longer if using applications that support banner printing. However, the actual print size depends
on the application, the paper size loaded in the printer, and the computer environment.
1. In the printer driver's Main tab, select Media Type.
2. Select Roll Paper from the Source list.
3. Click User Dened and match the paper size to the size of the data if necessary.
4. Make sure the Optimize Enlargement check box is selected on the Layout tab.
5. Check other settings, and then start printing.
Printing by Increasing Black Density
To print by increasing black density, use black enhance overcoat in the printer driver. is feature overcoats light
gray ink on the dark parts of printouts to increase the maximum density of black and to increase the dynamic
range.
Black enhance overcoat is only available for glossy paper. Note that it is not available for all types of glossy paper.
Printing
>
Printing Photos
>
Printing Varieties (Windows)
56
Image eects for black enhance overcoat
Note:
Enabling black enhance overcoat increases black density, and disabling it increases print speed.
1. When using applications featuring a color management function, specify how to adjust colors from these
applications.
When using applications without a color management function, start from step 2.
Depending on the type of the application, make the settings following the table below.
Application Color Management Settings
Adobe Photoshop CS3 or later
Adobe Photoshop Lightroom 1 or later
Adobe Photoshop Elements 6 or later
Printer Manages Colors
Other applications No Color Management
Note:
For information on the operating systems supported by each application, visit the distributor’s website.
Setting example for Adobe Photoshop Elements 2020
Click More Options on the print screen.
Select Color Management, and them select Printer Manages Colors from Color Handling. Click Printer
Preferences.
Printing
>
Printing Photos
>
Printing Varieties (Windows)
57
2. Make sure that Black Enhance Overcoat is selected as the Level on the printer driver's Main tab.
Black Enhance Overcoat is automatically enabled when anything other than Standard is selected as the Level.
3. If you want to further increase black density, select Max Quality (Carbon Black) as the Level.
4. Check other settings, and then start printing.
Printing Varieties (Mac OS)
Printing Black and White Photos
You can print black and white photos with rich gradation by adjusting the image data color by the printer driver.
e original data is not aected.
You can correct image data when printing without processing the data from applications.
Note:
It is recommended that you use images with a color space of sRGB.
Printing
>
Printing Photos
>
Printing Varieties (Mac OS)
58
1. When using applications featuring a color management function, specify how to adjust colors from these
applications.
When using applications without a color management function, start from step 2.
Depending on the type of the application, make the settings following the table below.
Application Color Management Settings
Adobe Photoshop CS3 or later
Adobe Photoshop Lightroom 1 or later
Adobe Photoshop Elements 6 or later
Printer Manages Colors
Other applications No Color Management
Note:
For information on the operating systems supported by each application, visit the distributor’s website.
Setting example for Adobe Photoshop Elements 2020
Click More Options on the print screen.
Select Color Management, and then select Printer Manages Colors from Color Handling. Click OK, and
then click Print on the print screen.
2. On the printer driver's print dialog, select Print Settings from the pop-up menu, and then select Advanced
B&W Photo as the Color setting.
3. Click Advanced Color Settings.
4. Check other settings, and then start printing.
Printing with Auto Color Correction
e printer driver for this printer comes with the Epson proprietary function PhotoEnhance that makes the most
ecient use of the color reproduction area, corrects image data to improve colors before printing.
Printing
>
Printing Photos
>
Printing Varieties (Mac OS)
59
By using PhotoEnhance, you can correct photo colors to match the subject types such as people, scenery, or night
view. You can print color data in sepia or black and white. Colors are automatically corrected simply by selecting
the print mode.
Note:
It is recommended that you use images with a color space of sRGB.
1. When using applications featuring a color management function, specify how to adjust colors from these
applications.
When using applications without a color management function, start from step 2.
Depending on the type of the application, make the settings following the table below.
Application Color Management Settings
Adobe Photoshop CS3 or later
Adobe Photoshop Lightroom 1 or later
Adobe Photoshop Elements 6 or later
Printer Manages Colors
Other applications No Color Management
Setting example for Adobe Photoshop Elements 2020
Click More Options on the print screen.
Select Color Management, and then select Printer Manages Colors from Color Handling. Click OK, and
then click Print on the print screen.
2. On the printer driver's print dialog, select Color Matching from the pop-up menu, and then click EPSON
Color Controls.
Note:
EPSON Color Controls is unavailable in Adobe Photoshop CS3 or later, Adobe Photoshop Lightroom 1 or later, and
Adobe Photoshop Elements 6 or later unless the setting in step 1 is made.
3. Select Print Settings from the pop-up menu, select PhotoEnhance from Color Settings, and then click
Advanced Color Settings.
4. Choose the eects that will be applied to the print data in the Advanced Color Settings screen.
Printing
>
Printing Photos
>
Printing Varieties (Mac OS)
60
5. Check other settings, and then start printing.
Printing Banners
You can print banners and panoramic pictures if you create and set print data for banner printing in your
application.
To print banners, select Roll Paper as the Paper Source in the printer driver.
You can print data created by document preparation soware, image editing soware, and so on. If you use image
editing soware, create print data at a size supported by the given application while maintaining the printing
length and width ratio.
e following printing sizes are available.
Width SC-P900 Series: 431.8mm
SC-P700 Series: 330mm
Length
*
Max. 18m
*: The paper length can be longer if using applications that support banner printing. However, the actual print size depends
on the application, the paper size loaded in the printer, and the computer environment.
1. On the printer driver's print dialog, select the size of the data created with the application in Paper Size.
If items on the Page Setup screen are not displayed on the Print screen due to the application being used,
display the Page Setup screen and make settings.
2. Check other settings, and then start printing.
Printing by Increasing Black Density
To print by increasing black density, use black enhance overcoat in the printer driver. is feature overcoats light
gray ink on the dark parts of printouts to increase the maximum density of black and to increase the dynamic
range.
Black enhance overcoat is only available for glossy paper. Note that it is not available for all types of glossy paper.
Printing
>
Printing Photos
>
Printing Varieties (Mac OS)
61
Image eects for black enhance overcoat
Note:
Enabling black enhance overcoat increases black density, and disabling it increases print speed.
1. When using applications featuring a color management function, specify how to adjust colors from these
applications.
When using applications without a color management function, start from step 2.
Depending on the type of the application, make the settings following the table below.
Application Color Management Settings
Adobe Photoshop CS3 or later
Adobe Photoshop Lightroom 1 or later
Adobe Photoshop Elements 6 or later
Printer Manages Colors
Other applications No Color Management
Note:
For information on the operating systems supported by each application, visit the distributor’s website.
Setting example for Adobe Photoshop Elements 2020
Click More Options on the print screen.
Select Color Management, and then select Printer Manages Colors from Color Handling. Click OK, and
then click Print on the print screen.
2. On the printer driver's print dialog, select Print Settings from the pop-up menu, and then select Quality
Options as Print Quality.
Printing
>
Printing Photos
>
Printing Varieties (Mac OS)
62
3. Select Black Enhance Overcoat.
If the check box is grayed out, move the slider for the quality level to Speed to enable the check box.
4. If you want to further increase black density, select Max Quality (Carbon Black) as the Print Quality.
5. Check other settings, and then start printing.
Printing Using Epson Photo+
Epson Photo+ an application that performs easy edits such as automatic color correction, while also allowing you
to make manual corrections or adjust the layout.
You can install Epson Photo+ from the Epson Web site.
Epson Photo+ automatically corrects backlight and subtle skin colors allowing you to print beautiful photos easily.
You can also turn o auto correction (PhotoEnhance).
e following four steps are the main operations. For details on each operation, access the Help from the button at
the top-right of the Epson Photo+ screen. (e screenshots used in the following examples are from Windows 10.)
Printing
>
Printing Photos
>
Printing Using Epson Photo+
63
3. Select the photo you want to print.
4. Edit and print.
You can perform the following edits.
❏Color correction (light, contrast, intensity)
❏Adjust layout
❏Add to/crop the screen
❏Input text
❏Add stamps (Pictographs, emoticons, some types of LINE stamps)
Printing
>
Printing Photos
>
Printing Using Epson Photo+
65
Printing Information About Photo Printing
Photo print information for the last 12 sheets is saved in the printer. For example, if you print three copies of a
photo, the printer saves three print histories. You can print photo information by selecting the information you
want to print. However, information about photo printing is deleted when the printer is turned o.
umbnails and print setting are printed for each photo. You can cut these out and save them as notes about the
print job.
1. Load the A4 size paper in the printer.
Information for three photos is printed on one A4 size paper. To print 12 sets of information, load four sheets
of paper.
2. Select on the home screen.
3. Check the thumbnails of the photos that you want to print on the Print Information Sheet screen.
4. Select Done and then start printing on the next screen.
Printing
>
Printing Photos
>
Printing Information About Photo Printing
66
Printing Documents
Printing from a Computer - Windows
Printing Using Easy Settings
Note:
Operations may dier depending on the application. See the application's help for details.
1. Load paper in the printer.
2. Open the le you want to print.
3. Select Print or Print Setup from the File menu.
4. Select your printer.
Printing
>
Printing Documents
>
Printing from a Computer - Windows
67
5. Select Preferences or Properties to access the printer driver window.
6. Change the settings as necessary.
See the menu options for the printer driver for details.
Note:
❏You can also see the online help for explanations of the setting items. Right-clicking an item displays Help.
❏When you select Print Preview, you can see a preview of your document before printing.
7. Click OK to close the printer driver window.
8. Click Print.
Note:
❏When you select Print Preview, a preview window is displayed. To change the settings, click Cancel, and then repeat
the procedure from step 3.
❏If you want to cancel printing, on your computer right-click on your printer in Devices and Printers, Printer, or in
Printers and Faxes. Click See what's printing, right-click on the job you want to cancel, and then select Cancel.
However, you cannot cancel a print job from the computer once it has been completely sent to the printer. In this
case, cancel the print job by using the printer's control panel.
Related Information
&“Available Paper and Capacities” on page 180
&“Menu Options for the Printer Driver” on page 69
Printing
>
Printing Documents
>
Printing from a Computer - Windows
68
Menu Options for the Printer Driver
Open the print window in an application, select the printer, and then access the printer driver window.
Note:
Menus vary depending on the option you selected.
Main Tab
Select Setting:
Save/Del:
You can add or remove your own presets for frequently used print settings. Select the preset you want
to use from the list.
Media Type:
Select the type of paper on which you print.
Print Mode:
Select whether to print in color or in monochrome.
Level:
Select the pint quality you want to use for printing. Available settings depend on the paper type you
select. When selecting higher quality, the printing speed may be slower. If you select Quality
Options, you can make detailed settings.
Black Enhance Overcoat:
Select to print with enhanced image contrast and tones of black. is option can only be selected for
supported paper.
Mode:
Make the color tone settings for the prints. Available options depend on the Print Mode setting.
Clicking Advanced opens the Color Controls screen where you can select a detailed method of color
correction.
Source:
Select the paper source from which the paper is fed.
Document Size:
Select the size of the print le set in the application. If a predened paper size is not available, click
User Dened to set your own paper size.
Borderless:
Enlarges the print data slightly more than the paper size so that no margins are printed around the
edges of the paper. Click Expansion to select the amount of enlargement.
Print Preview:
Displays a preview of your document before printing.
Printing
>
Printing Documents
>
Printing from a Computer - Windows
69
Layout Manager:
When you check this box and start printing, the print jobs are arranged and displayed on the Layout
Manager dialog box. You can arrange data created by dierent applications in order of preference and
combine them into a single print job.
Note:
You cannot make settings other than Document Size when Layout Manager is checked. Make the detailed
print settings on the Layout Manager dialog box.
Ink Levels:
Displays the approximate ink level.
Restore Default:
Return all settings to their factory default values. e settings on the Layout tab are also reset to their
defaults.
Show Settings:
Displays a list of items currently set on the Main and Layout tabs. You can show or hide the current
setting list screen.
Layout Tab
Select Setting:
Save/Del:
You can add or remove your own presets for frequently used print settings. Select the preset you want
to use from the list.
Orientation:
Select the orientation you want to use to print.
Rotate 180°:
Rotates pages 180 degrees before printing.
Mirror Image:
Inverts the image so that it prints as it would appear in a mirror.
Copies:
Set the number of copies you want to print.
Collate:
Prints multi-page documents collated in order and sorted into sets.
Reverse Order:
Allows you to print from the last page so that the pages are stacked in the correct order aer
printing.
Paper Size:
Select the size of the print le set in the application.
Printing
>
Printing Documents
>
Printing from a Computer - Windows
70
Output Size:
Select the paper size on which you want to print. If the Paper Size diers from the Output Size,
Reduce/Enlarge is selected automatically. You do not have to select it when printing without
reducing or enlarging the size of a document.
Reduce/Enlarge:
Allows you to reduce or enlarge the size of a document.
Fit to Output Size:
Automatically reduce or enlarge the document to t to the paper size selected in Output Size.
Fit to Roll Paper WidthFit to Output Size:
Automatically reduce or enlarge the document to t to the roll paper size selected in Output
Size. is option is available when Roll Paper is selected as the Source.
Specify Size:
Prints with a specic percentage.
Page Layout:
Allows you to print several pages on one sheet or perform poster printing. Click Settings to specify
the order in which pages are printed.
2-sided printing:
Allows you to perform 2-sided printing.
Margins:
You can specify the binding edge and the binding margins.
Folded Booklet:
Select this check box if you wish to print a single-fold booklet.
Optimize Enlargement:
Select this check box to optimize an enlargement to achieve long poster or panoramic printing
without using a particular application. Clear this check box if text or graphics are distorted; however,
output length may be limited depending on the application.
Print Bckg Color:
Select this check box to print a background color. Click Color Settings to select a background color.
Job Settings:
Select this check box to print the settings items. Click Details to open the Job Settings dialog box to
select the setting items to print.
Reset Defaults:
Return all settings to their factory default values. e settings on the Main tab are also reset to their
defaults.
Printing
>
Printing Documents
>
Printing from a Computer - Windows
71
Show Settings:
Displays a list of items currently set on the Main and Layout tabs. You can show or hide the current
setting list screen.
Utility Tab
Nozzle Check:
Prints a nozzle check pattern to check if the print head nozzles are clogged.
Print Head Cleaning:
Cleans the clogged nozzles in the print head. Because this feature uses some ink, clean the print head
only if the nozzles are clogged. Print a nozzle check pattern and then select Cleaning if there are just
a few defects in the pattern. Power Cleaning consumes more ink than Cleaning. Only use this if
there are many defects in the nozzle check pattern.
EPSON Status Monitor 3:
Opens the EPSON Status Monitor 3 window. Here you can conrm the status of the printer and the
consumables.
Monitoring Preferences:
Allows you to make settings for items on the EPSON Status Monitor 3 window.
Print Queue:
Displays the jobs waiting to be printed. You can check, pause, or resume print jobs.
Printer and Option Information:
Click to display the Printer and Option Information dialog box. You can view and make settings for
the optional information.
Speed and Progress:
Allows you to make a variety of settings related to printing speed and progress. Right-click each item
to view the online help for more details.
Menu Arrangement:
You c an a r ra n ge the Select Setting, Media Type, and Paper Size list items. Arrange the items as you
prefer, or classify the items into groups. You can also hide the items you are not using.
Export or Import:
You can export or import the printer driver settings. It is convenient to use this feature when you
want to make the same printer driver settings to multiple computers.
Epson Media Installer:
You can add media setting to printers and printer drivers from the Internet. Click when you cannot
nd the media you want to print on in the driver's media types. Depending on the media you are
using, you may not be able to download media settings.
See the related information link below for details.
Printing
>
Printing Documents
>
Printing from a Computer - Windows
72
Language:
Changes the language to be used on the printer driver window. To apply the settings, close the printer
driver, and then open it again.
Software Update:
Starts EPSON Soware Updater to check for the latest version of applications on the Internet.
Related Information
&“Printing to Paper Types Other than Genuine Paper” on page 188
Adding Printing Presets for Easy Printing
If you create your own preset of frequently used print settings on the printer driver, you can print easily by
selecting the preset from the list.
1. On the printer driver's Main or Layout tab, set each item (such as Media Type and Source).
“Main Tab” on page 69
“Layout Tab” on page 70
2. Click Save/Del in Select Setting.
3. Enter a Name and, if necessary, enter a comment.
4. Click Save.
Note:
To delete an added preset, click Save/Del, select the preset name you want to delete from the list, and then delete it.
5. Click Print.
e next time you want to print using the same settings, select the registered setting name from Select Setting, and
click OK.
Related Information
&“Printing Using Easy Settings” on page 67
Printing
>
Printing Documents
>
Printing from a Computer - Windows
73
Printing on 2-Sides
e printer driver will automatically print odd pages and even pages separately. When the odd pages have been
printed, turn over the paper according to the instructions and print the even pages.
Note:
❏is feature is not available for borderless printing.
❏2-sided printing is supported with the rear paper feeder only.
❏If you do not use paper that is suitable for 2-sided printing, the print quality may decline and paper jams may occur.
❏Depending on the paper and the data, ink may bleed through to the other side of the paper.
❏You cannot perform manual 2-sided printing unless EPSON Status Monitor 3 is enabled. If EPSON Status Monitor 3 is
disabled, access the printer driver window, click Speed and Progress on the Utility tab, and then clear Disable EPSON
Status Monitor 3.
❏However, it may not be available when the printer is accessed over a network or is used as a shared printer.
1. On the printer driver's Layout tab, select 2-sided printing.
When Roll Paper is selected as the Source setting, you cannot select 2-sided printing. In this case, set the
Source rst from the Main screen.
2. Click Margins, make the appropriate settings, and then click OK.
3. Set the other items on the Main and Layout tabs as necessary, and then click OK.
“Main Tab” on page 69
“Layout Tab” on page 70
4. Click Print.
When the rst side has nished printing, a pop-up window is displayed on the computer. Follow the on-screen
instructions.
Related Information
&“Available Paper and Capacities” on page 180
&“Printing Using Easy Settings” on page 67
Printing
>
Printing Documents
>
Printing from a Computer - Windows
74
Printing a Booklet
You can also print a booklet that can be created by re-ordering the pages and folding the printout.
Note:
❏is feature is not available with borderless printing.
❏2-sided printing is supported with the rear paper feeder only.
❏If you do not use paper that is suitable for 2-sided printing, the print quality may decline and paper jams may occur.
❏Depending on the paper and the data, ink may bleed through to the other side of the paper.
❏You cannot perform manual 2-sided printing unless EPSON Status Monitor 3 is enabled. If EPSON Status Monitor 3 is
disabled, access the printer driver window, click Speed and Progress on the Utility tab, and then clear Disable EPSON
Status Monitor 3.
❏However, it may not be available when the printer is accessed over a network or is used as a shared printer.
1. On the printer driver's Layout tab, select 2-sided printing and Folded Booklet.
2. Click Margins, and then specify the binding edge and the binding margins.
3. Click OK.
4. Set the other items on the Main and Layout tabs as necessary, and then click OK.
“Main Tab” on page 69
“Layout Tab” on page 70
5. Click Print.
Related Information
&“Available Paper and Capacities” on page 180
&“Printing Using Easy Settings” on page 67
Printing
>
Printing Documents
>
Printing from a Computer - Windows
75
Printing Several Pages on One Sheet
You can print several pages of data on a single sheet of paper.
Note:
is feature is not available with borderless printing.
1. On the printer driver's Layout tab, and then select Page Layout and N-up.
2. Click Settings, make the appropriate settings, and then click OK.
3. Set the other items on the Main and Layout tabs as necessary, and then click OK.
“Main Tab” on page 69
“Layout Tab” on page 70
4. Click Print.
Related Information
&“Printing Using Easy Settings” on page 67
Printing
>
Printing Documents
>
Printing from a Computer - Windows
76
Printing to Fit the Paper Size
Select the paper size you loaded in the printer as the Output Size setting.
1. On the printer driver's Layout tab, make the following settings.
❏Paper Size: Select the size of the print le set in the application.
❏Output Size: Select the paper size you loaded in the printer.
Fit to Output Size is automatically selected.
2. Set the other items on the Main and Layout tabs as necessary, and then click OK.
“Main Tab” on page 69
“Layout Tab” on page 70
3. Click Print.
Related Information
&“Printing Using Easy Settings” on page 67
Printing to Fit to Roll Paper Width
You can print according to the width of the roll paper loaded in the printer.
1. On the printer driver's Main tab, select Roll Paper from Source.
2. Select the Layout tab, and then select a paper size from Page Size that matches the document size.
Printing
>
Printing Documents
>
Printing from a Computer - Windows
77
3. Select Reduce/Enlarge and click Fit to Roll Paper Width.
4. Select the width of the roll paper loaded in the printer from Roll Width.
5. Set the other items on the Main and Layout tabs as necessary, and then click OK.
“Main Tab” on page 69
“Layout Tab” on page 70
6. Click Print.
Related Information
&“Printing Using Easy Settings” on page 67
Printing a Reduced or Enlarged Document at any Magnication
You can reduce or enlarge the size of a document by a specic percentage.
Note:
is feature is not available with borderless printing.
1. On the printer driver's Layout tab, select the document size from the Paper Size setting.
2. Select the paper size you want to print on from the Output Size setting.
3. Select Reduce/Enlarge, Specify Size, and then enter a percentage.
4. Set the other items on the Main and Layout tabs as necessary, and then click OK.
“Main Tab” on page 69
“Layout Tab” on page 70
5. Click Print.
Printing
>
Printing Documents
>
Printing from a Computer - Windows
78
Related Information
&“Printing Using Easy Settings” on page 67
Printing One Image on Multiple Sheets for Enlargement (Creating a Poster)
is feature allows you to print one image on multiple sheets of paper. You can create a larger poster by taping
them together.
1. On the printer driver's Layout tab, select Page Layout and Poster.
2. Click Settings, make the appropriate settings, and then click OK.
Note:
Print Cutting Guides allows you to print a cutting guide.
3. Set the other items on the Main and Layout tabs as necessary, and then click OK.
“Main Tab” on page 69
“Layout Tab” on page 70
4. Click Print.
Related Information
&“Printing Using Easy Settings” on page 67
Printing
>
Printing Documents
>
Printing from a Computer - Windows
79
Making Posters Using Overlapping Alignment Marks
Here is an example of how to make a poster when 2x2 is selected, and Overlapping Alignment Marks is selected
in Print Cutting Guides.
1. Prepare Sheet 1 and Sheet 2. Cut o the margins of Sheet 1 along the vertical blue line through the center of
the top and bottom cross marks.
Printing
>
Printing Documents
>
Printing from a Computer - Windows
80
2. Place the edge of Sheet 1 on top of Sheet 2 and align the cross marks, then temporarily tape the two sheets
together from the back.
3. Cut the taped sheets in two along the vertical red line through the alignment markers (this time, the line to the
le of the cross marks).
Printing
>
Printing Documents
>
Printing from a Computer - Windows
81
10. Cut o the remaining margins along the outer guide.
Adjusting the Print Color
You can adjust the colors used in the print job. ese adjustments are not applied to the original data.
You can select from the following color correction modes.
1. On the printer driver's Main tab, select the method of color correction from the Mode setting.
❏EPSON Standard (sRGB)
Increases the contrast in images. Use this setting for color photographs.
Printing
>
Printing Documents
>
Printing from a Computer - Windows
85
❏Adobe RGB
Matches image color to the Adobe RGB. Use this setting for data that contains Adobe RGB color space
information.
❏PhotoEnhance
PhotoEnhance is a feature that uses Epson's proprietary image analysis and processing technology to
automatically print images at a higher quality.
❏ICM
Select this setting when you use the Windows ICM (Image Color Matching) feature to match colors
between devices such as the printer and screen display.
Click Advanced if you want to make your own settings.
2. Set the other items on the Main and Layout tabs as necessary, and then click OK.
“Main Tab” on page 69
“Layout Tab” on page 70
3. Click Print.
Related Information
&“Printing Using Easy Settings” on page 67
Printing Multiple Files Together (Layout Manager)
e Layout Manager function allows you to place multiple pieces of print data created in dierent applications on
the paper freely and print them at once.
You can create a poster or display material by placing multiple pieces of print data where you like. Also, Layout
Manager allows you to use paper eectively.
1. Open the le you want to print in your application.
2. On the printer driver's Main tab, select Layout Manager and in Document Size set the paper size created
using the application.
Note:
e option selected for Size is the size used in the Layout Manager. e actual printing paper size is set in the screen in
step 6.
Printing
>
Printing Documents
>
Printing from a Computer - Windows
86
3. Click OK. When printing with an application, the Layout Manager screen opens.
e print data is not printed, but one page is placed on the paper of the Layout Manager screen as one object.
4. Leave the Layout Manager screen open and repeat steps 1 to 3 to arrange the next pieces of data.
e objects are added to the Layout Manager screen.
5. Arrange the objects on the Layout Manager screen.
You can drag objects to move and resize them, use tool buttons and the Object menu to align and rotate
objects on the Layout Manager screen.
You can resize and replace whole objects in the Preference or Arrangement Settings screens.
See the Layout Manager screen help for more details on each feature.
6. Click File > Properties, and make print settings on the printer driver screen.
Set Media Type, Source, Document Size, and so on.
7. Click the File menu on the Layout Manager screen, and then click Print.
Related Information
&“Printing Using Easy Settings” on page 67
Printing from a Computer - Mac OS
Printing Using Easy Settings
Note:
Operations and screens dier depending on the application. See the application's help for details.
1. Load paper in the printer .
2. Open the le you want to print.
3. Select Print from the File menu or another command to access the print dialog.
If necessary, click Show Details or
d
to expand the print window.
4. Select your printer.
Printing
>
Printing Documents
>
Printing from a Computer - Mac OS
87
5. Select Print Settings from the pop-up menu.
Note:
If the Print Settings menu is not displayed on macOS High Sierra, macOS Sierra, OS X El Capitan, OS X Yosemite, OS
X Mavericks, the Epson printer driver has not been installed correctly. Enable it from the following menu.
Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the
printer, and then add the printer again. See the following to add a printer.
“Adding the Printer (for Mac OS Only)” on page 109
macOS Mojave or later cannot access Print Settings in applications made by Apple such as TextEdit.
6. Change the settings as necessary.
See the menu options for the printer driver for details.
7. Click Print.
Note:
If you want to cancel printing, on your computer click the printer icon in the Dock. Select the job you want to cancel,
and then click next to the progress meter. However, you cannot cancel a print job from the computer once it has
been completely sent to the printer. In this case, cancel the print job by using the printer's control panel.
Related Information
&“Available Paper and Capacities” on page 180
&“Menu Options for the Printer Driver” on page 89
Printing
>
Printing Documents
>
Printing from a Computer - Mac OS
88
Menu Options for the Printer Driver
Open the print window in an application, select the printer, and then access the printer driver window.
Note:
Menus vary depending on the option you selected.
Menu Options for Layout
Pages per Sheet:
Select the number of pages to be printed on one sheet.
Layout Direction:
Specify the order in which the pages will be printed.
Border:
Prints a border around the pages.
Reverse page orientation:
Rotates pages 180 degrees before printing.
Flip horizontally:
Inverts an image to print as it would appear in a mirror.
Menu Options for Color Matching
ColorSync/EPSON Color Controls:
Select the method for color adjustment. ese options adjusts colors between the printer and the
computer display to minimize the dierence in color.
Menu Options for Paper Handling
Collate pages:
Prints multi-page documents collated in order and sorted into sets.
Pages to Print:
Select to print only odd pages or even pages.
Page Order:
Select to print from the top or the last page.
Scale to t paper size:
Prints to t to the paper size you loaded.
❏Destination Paper Size:
Select the paper size to print on.
Printing
>
Printing Documents
>
Printing from a Computer - Mac OS
89
❏Scale down only:
Select this when you want to reduce the size only if the print data is too large for the paper size
loaded in the printer.
Menu Options for Cover Page
Print Cover Page:
Select whether or not to print a cover page. When you want to add a back cover, select Aer document.
Cover Page Type:
Select the contents of the cover page.
Menu Options for Print Settings
Basic:
Page Setup:
Displays the paper setting or Standard selected in Paper Size.
Media Type:
Select the type of paper on which you print.
Color:
Select whether to print in color or in monochrome.
Color Settings:
Make the color tone settings for the prints. If Advanced B&W Photo is selected as the Color setting, set
the color tone for Color Toning.
Print Quality:
Select the pint quality you want to use for printing. e options vary depending on the paper type.
Black Enhance Overcoat:
Select to print with enhanced image contrast and tones of black. Black Enhance Overcoatcan only be
selected for supported paper.
High Speed:
Prints when the print head moves in both directions. e print speed is faster, but the quality may
decline.
Finest Detail:
Depending on the Print Quality setting you select, you can turn on Finest Detail to print text, solid
graphics, and line art with very sharp edges.
Print Preview:
Displays a preview of your document before printing.
Printing
>
Printing Documents
>
Printing from a Computer - Mac OS
90
Advanced Color Settings:
You can set the gamma and adjust brightness, contrast, and saturation.
Print Preview:
Displays a preview of your document before printing.
Menu Options for Page Layout Settings
Roll Paper Option:
You can make settings related to roll paper printing, such as Auto Rotate and Print page frame.
Expansion:
You can adjust the amount of protrusion during borderless printing.
Menu Options for Paper Conguration
Color Density:
Adjusts the strength of Color Density. Drag the slider to the right or le with your mouse to adjust the
setting. You can also type a number in the box next to the slider.
Menu Options for Supply Levels
Displays the approximate ink level.
Adding Printing Presets for Easy Printing
If you create your own preset of frequently used print settings on the printer driver, you can print easily by
selecting the preset from the list.
1. Set each item such as Print Settings and Layout (Media Type, Color, and so on).
2. Click Presets to save the current settings as a preset.
3. Click OK.
Note:
To delete an added preset, click Presets > Show Presets, select the preset name you want to delete from the list, and then
delete it.
Printing
>
Printing Documents
>
Printing from a Computer - Mac OS
91
4. Click Print.
e next time you want to print using the same settings, select the registered preset name from the Presets.
Related Information
&“Printing Using Easy Settings” on page 87
Printing Several Pages on One Sheet
You can print several pages of data on a single sheet of paper.
1. Select Layout from the pop-up menu.
2. Set the number of pages in Pages per Sheet, the Layout Direction (page order), and Border.
“Menu Options for Layout” on page 89
3. Set the other items as necessary.
4. Click Print.
Related Information
&“Printing Using Easy Settings” on page 87
Printing
>
Printing Documents
>
Printing from a Computer - Mac OS
92
Printing to Fit the Paper Size
Select the paper size you loaded in the printer as the Destination Paper Size setting.
1. Select Paper Handling from the pop-up menu.
2. Select Scale to t paper size.
3. Select the paper size you loaded in the printer as the Destination Paper Size setting.
4. Set the other items as necessary.
5. Click Print.
Related Information
&“Printing Using Easy Settings” on page 87
Printing a Reduced or Enlarged Document at any Magnication
You can reduce or enlarge the size of a document by a specic percentage.
1. Select Print from the File menu or another command to access the print dialog.
Printing
>
Printing Documents
>
Printing from a Computer - Mac OS
93
2. Select Page Setup from the File menu of the application.
3. Select Printer, Paper Size, enter percentage in Scale, and then click OK.
Note:
Select the paper size you set in the application as the Paper Size setting.
4. Set the other items as necessary.
5. Click Print.
Related Information
&“Printing Using Easy Settings” on page 87
Adjusting the Print Color
You can adjust the colors used in the print job. ese adjustments are not applied to the original data.
PhotoEnhance produces sharper images and more vivid colors by automatically adjusting the contrast, saturation,
and brightness of the original image data.
Note:
PhotoEnhance adjusts the color by analyzing the location of the subject. erefore, if you have changed the location of the
subject by reducing, enlarging, cropping, or rotating the image, the color may change unexpectedly. Selecting the borderless
setting also changes the location of the subject resulting in changes in color. If the image is out of focus, the tone may be
unnatural. If the color is changed or becomes unnatural, print in a mode other than PhotoEnhance.
1. Select Color Matching from the pop-up menu, and then select EPSON Color Controls.
2. Select Print Settings from the pop-up menu.
3. On the Basic tab, select Print Settings, and then select the type of color correction from Color Settings.
4. Select the Advanced Color Settings tab, and then set the Gamma, Brightness, Contrast, Saturation, and so on.
5. Set the other items as necessary.
6. Click Print.
Related Information
&“Printing Using Easy Settings” on page 87
Printing
>
Printing Documents
>
Printing from a Computer - Mac OS
94
Printing Documents from Smart Devices (iOS)
You can print documents from a smart device such as a smartphone or tablet.
Printing Documents Using Epson Smart Panel
Note:
Operations may dier depending on the device.
1. Load paper in the printer.
“Loading Paper” on page 26
2. Set up your printer for wireless printing.
3. If Epson Smart Panel is not installed, install it.
“Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)” on page 199
4. Connect your smart device to the same wireless network as your printer.
5. Start Epson Smart Panel.
6. Tap Print Documents on the home screen.
7. Tap Select Document.
8. Tap the location of the document you want to print, and then select the document.
9. Tap Print.
Printing Documents Using AirPrint
AirPrint enables instant wireless printing from iPhone, iPad, iPod touch, and Mac without the need to install
drivers or download soware.
Note:
If you disabled paper conguration messages on your printer control panel, you cannot use AirPrint. See the link below to
enable the messages, if necessary.
Printing
>
Printing Documents
>
Printing Documents from Smart Devices (iOS)
95
1. Load paper in the printer.
“Loading Paper” on page 26
2. Set up your printer for wireless printing. See the link below.
http://epson.sn
3. Connect your Apple device to the same wireless network that your printer is using.
4. Print from your device to your printer.
Note:
For details, see the AirPrint page on the Apple website.
Related Information
&“Cannot Print Even ough a Connection has been Established (iOS)” on page 134
Printing Documents from Smart Devices (Android)
You can print documents from a smart device such as a smartphone or tablet.
Printing Documents Using Epson Smart Panel
Note:
Operations may dier depending on the device.
1. Load paper in the printer.
“Loading Paper” on page 26
2. Set up your printer for wireless printing.
3. If Epson Smart Panel is not installed, install it.
“Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)” on page 199
4. Connect your smart device to the same wireless network as your printer.
5. Start Epson Smart Panel.
6. Tap Print Documents on the home screen.
7. Tap Select Document.
8. Tap the location of the document you want to print, and then select the document.
Printing
>
Printing Documents
>
Printing Documents from Smart Devices (Android)
96
9. Tap Print.
Printing Using Mopria Print Service
Mopria Print Service enables instant wireless printing from Android smart phones or tablets.
1. Install Mopria Print Service from Google Play.
2. Load paper in the printer.
3. Set up your printer for wireless printing. See the link below.
http://epson.sn
4. Connect your Android device to the same wireless network that your printer is using.
5. Print from your device to your printer.
Note:
For more details, access the Mopria Web site at https://mopria.org.
Related Information
&“Loading Paper” on page 26
Printing
>
Printing Documents
>
Printing Documents from Smart Devices (Android)
97
Printing Using a Cloud Service
By using Epson Connect service available on the Internet, you can print from your smartphone, tablet PC, or
laptop, anytime and practically anywhere. To use this service, you need to register the user and the printer in
Epson Connect.
e features available on the Internet are as follows.
❏Email Print
When you send an email with attachments such as documents or images to an email address assigned to the
printer, you can print that email and the attachments from remote locations such as your home or oce printer.
❏Remote Print Driver
is is a shared driver supported by Remote Print Driver. When printing using a printer in a remote location,
you can print by changing the printer on the usual applications window.
See the Epson Connect web portal for details on how to setup or print.
https://www.epsonconnect.com/
http://www.epsonconnect.eu (Europe only)
Registering to Epson Connect Service from the Control Panel
Follow the steps below to register the printer.
1. Select on the control panel.
2. Select General Settings > Web Service Settings > Epson Connect Services > Register > Start Setup to print
the registration sheet.
3. Follow the instructions on the registration sheet to register the printer.
Printing
>
Printing Using a Cloud Service
>
Registering to Epson Connect Service from the Control Panel
98
Maintaining the Printer
Checking the Status of Consumables................................... 100
Improving Paper Feeding Problems (Rear Paper Feeder).....................100
Improving Print Quality............................................ 101
Saving Power.................................................... 106
Installing or Uninstalling Applications Separately..........................106
Transporting and Storing the Printer................................... 111
Checking the Status of Consumables
You can check the approximate ink levels and the approximate service life of the maintenance box from the control
panel or the computer.
Note:
You can continue printing while the ink low message is displayed. Replace the ink cartridges when required.
Checking the Status of Consumables (Control Panel)
Select on the printer's control panel.
Checking the Status of Consumables (Windows)
1. Access the printer driver window.
2. Click EPSON Status Monitor 3 on the Utility tab.
Note:
If EPSON Status Monitor 3 is disabled, click Speed and Progress on the Utility tab, and then clear Disable EPSON
Status Monitor 3.
Checking the Status of Consumables (Mac OS)
1. Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print
& Fax), and then select the printer.
2. Click Options & Supplies > Utility > Open Printer Utility.
3. Click EPSON Status Monitor.
Improving Paper Feeding Problems (Rear Paper
Feeder)
If you have a paper feed problem from the rear paper feeder, and if you have a cleaning sheet that came with Epson
genuine paper, load the cleaning sheet and clean the inside of the printer. For details on using the cleaning sheet,
see the instructions that came with the sheet.
1. Remove any paper for printing loaded in the rear paper feeder.
2. Remove the protective sheet from the cleaning sheet.
e cleaning sheet has adhesive tape under the protective sheet. Be careful not to touch the surface of the
cleaning sheet or attach it to anything else.
3. Load the cleaning sheet in the rear paper feeder.
4. Select on the printer's control panel.
5. Select Maintenance > Paper Guide Cleaning.
Maintaining the Printer
>
Improving Paper Feeding Problems (Rear Paper Feeder)
100
6. Follow the on-screen instructions to clean the paper path.
Repeat this procedure two or three times.
Note:
e cleaning sheet loses eect when used three times or more.
Improving Print Quality
Checking and Cleaning the Print Head
If the nozzles are clogged, the printouts become faint, there is visible banding, or unexpected colors appear. If the
nozzles are severely clogged, a blank sheet will be printed. When print quality has declined, rst use the nozzle
check feature to check if the nozzles are clogged. If the nozzles are clogged, clean the print head.
c
Important:
❏Do not open the printer cover or turn o the printer during head cleaning. If the head cleaning is incomplete, you
may not be able to print.
❏Head cleaning consumes ink and should not be performed more than necessary.
❏When ink is low, you may not be able to clean the print head.
❏If print quality has not improved aer repeating nozzle check and head cleaning 3 times, wait for at least 6 hours
without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We recommend
turning o the printer by using the
P
button. If print quality has still not improved, run Power Cleaning.
❏To prevent the print head from drying out, do not unplug the printer while the power is on.
Checking and Cleaning the Print Head (Control Panel)
1. Load A4-size plain paper in the printer.
“Loading Paper in the Rear Paper Feeder” on page 29
2. Select on the printer's control panel.
3. Select Maintenance.
4. Select Print Head Nozzle Check.
5. Follow the on-screen instructions to print the nozzle check pattern.
Maintaining the Printer
>
Improving Print Quality
>
Checking and Cleaning the Print Head
101
6. Check the printed pattern to see if the print head nozzles are clogged.
❏A:
All lines are printed. Select . No further steps are needed.
❏B or close to B:
Some nozzles are clogged. Select , and then select Head Cleaning on the next screen.
❏C or worse than C:
If most lines are missing or not printed, this indicates most nozzles are clogged. Select , and then select
Power Cleaning on the next screen.
7. Follow the on-screen instructions to perform print head cleaning or Power Cleaning.
8. When cleaning is nished, print the nozzle check pattern again. Repeat cleaning and printing the pattern until
all lines are printed completely.
c
Important:
If print quality has not improved aer repeating nozzle check and head cleaning 3 times, wait for at least 6
hours without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We
recommend turning o the printer using the
P
button. If print quality has still not improved, run Power
Cleaning.
Checking and Cleaning the Print Head (Windows)
1. Load A4 -size plain paper in the printer.
“Loading Paper in the Rear Paper Feeder” on page 29
2. Access the printer driver window.
3. Click Print Head Nozzle Check on the Utility tab.
Maintaining the Printer
>
Improving Print Quality
>
Checking and Cleaning the Print Head
102
4. Follow the on-screen instructions.
c
Important:
If print quality has not improved aer repeating nozzle check and head cleaning 3 times, wait for at least 6
hours without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We
recommend turning o the printer using the
P
button. If print quality has still not improved, run Power
Cleaning.
Checking and Cleaning the Print Head (Mac OS)
1. Load A4 -size plain paper in the printer.
“Loading Paper in the Rear Paper Feeder” on page 29
2. Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer.
3. Click Option & Supplies > Utility > Open Printer Utility.
4. Click Print Head Nozzle Check.
5. Follow the on-screen instructions.
c
Important:
If print quality has not improved aer repeating nozzle check and head cleaning 3 times, wait for at least 6
hours without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We
recommend turning o the printer using the
P
button. If print quality has still not improved, run Power
Cleaning.
Running Power Cleaning
e Power Cleaning feature may improve print quality in the following cases.
❏When most nozzles are clogged.
❏When you have performed a nozzle check and head cleaning 3 times and waited for at least 6 hours without
printing, but print quality still did not improve.
c
Important:
e Power Cleaning uses more ink than the print head cleaning.
Running Power Cleaning (Control Panel)
1. Load A4 -size plain paper in the printer.
“Loading Paper in the Rear Paper Feeder” on page 29
Maintaining the Printer
>
Improving Print Quality
>
Running Power Cleaning
103
2. Select on the printer's control panel.
3. Select Maintenance.
4. Select Print Head Cleaning > Power Cleaning.
5. When cleaning is nished, print the nozzle check pattern again. Check that all of the lines in the nozzle check
pattern are printed correctly.
c
Important:
If print quality has not improved aer running Power Cleaning, wait for at least 6 hours without printing, and
then print the nozzle check pattern again. Run Head Cleaning or Power Cleaning again depending on the
printed pattern. If quality still does not improve, contact Epson support.
Running Power Cleaning (Windows)
1. Access the printer driver window.
2. Click Print Head Cleaning on the Utility tab.
3. Select Power Cleaning.
4. Follow the on-screen instructions.
c
Important:
If print quality has not improved aer running Power Cleaning, wait for at least 6 hours without printing, and
then print the nozzle check pattern again. Run Cleaning or Power Cleaning again depending on the printed
pattern. If quality still does not improve, contact Epson support.
Running Power Cleaning (Mac OS)
1. Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer.
2. Click Option & Supplies > Utility > Open Printer Utility.
3. Click Print Head Cleaning.
4. Select Power Cleaning.
5. Follow the on-screen instructions.
c
Important:
If print quality has not improved aer running Power Cleaning, wait for at least 6 hours without printing, and
then print the nozzle check pattern again. Run Cleaning or Power Cleaning again depending on the printed
pattern. If quality still does not improve, contact Epson support.
Maintaining the Printer
>
Improving Print Quality
>
Running Power Cleaning
104
Preventing nozzle clogging
Always use the power button when turning the printer on and o.
Check that the power light is o before you disconnect the power cord.
e ink itself can dry out if it is not covered. Just like placing a cap on a fountain pen or an oil pen to prevent it
from drying, make sure the print head is capped properly to prevent the ink from drying.
When the power cord is unplugged or a power outage occurs while the printer is in operation, the print head may
not be capped properly. If the print head is le as it is, it will dry out causing nozzles (ink outlets) to clog.
In these cases, turn the printer on and o again as soon as possible to cap the print head.
Aligning the Print Head
1. Load A4-size Photo Quality Ink Jet Paper in the printer.
You can also use plain paper instead.
“Loading Paper in the Rear Paper Feeder” on page 29
2. Select on the printer's control panel.
3. Select Maintenance > Print Head Alignment.
4. Follow the on-screen instructions to print an alignment pattern and select the number for the optimum
pattern.
Find and select the number for the most solid pattern in each group.
Cleaning the Paper Path for Ink Smears
When the printouts are smeared or scued, clean the paper path inside. Cleaning sheets cannot be used for this
purpose.
c
Important:
Do not use tissue paper to clean the inside of the printer. e print head nozzles may be clogged with lint.
1. Load plain paper of the following size in the rear paper feeder.
SC-P900 Series: A2
SC-P700 Series: A3 or A3+
Maintaining the Printer
>
Improving Print Quality
>
Cleaning the Paper Path for Ink Smears
105
“Loading Paper in the Rear Paper Feeder” on page 29
2. Select on the printer's control panel.
3. Select Maintenance > Paper Guide Cleaning.
4. Follow the on-screen instructions to clean the paper path.
Note:
Repeat this procedure until the paper is not smeared with ink.
Saving Power
e printer enters sleep mode or turns o automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will aect the product's energy eciency. Please
consider the environment before making any change.
1. Select on the printer's control panel.
2. Select General Settings.
3. Select Basic Settings.
4. Do one of the following.
Note:
Your produc t may have the Power O Settings or Power O Timer feature depending on the location of purchase.
❏Select Sleep Timer or Power O Settings > Power O If Inactive or Power O If Disconnected.
❏Select Sleep Timer or Power O Timer.
5. Select the setting.
Installing or Uninstalling Applications Separately
Connect your computer to the network and install the latest version of applications from the website. Log in to
your computer as an administrator. Enter the administrator password if the computer prompts you.
Installing the Applications Separately
Note:
When reinstalling an application, you need to uninstall it rst.
1. Make sure the printer and the computer are available for communication, and the printer is connected to the
Internet.
Maintaining the Printer
>
Installing or Uninstalling Applications Separately
>
Installing the Applications Separ
…
106
2. Start EPSON Soware Updater.
e screenshot is an example on Windows.
3. For Windows, select your printer, and then click to check for the latest available applications.
4. Select the items you want to install or update, and then click the install button.
c
Important:
Do not turn o or unplug the printer until the update is complete. Doing so may result in malfunction of the
printer.
Note:
You can download the latest applications from the Epson website.
http://www.epson.com
Related Information
&“Application for Updating Soware and Firmware (EPSON Soware Updater)” on page 202
&“Uninstalling Applications” on page 109
Checking if a genuine Epson printer driver is installed - Windows
You can check if a genuine Epson printer driver is installed on your computer by using one of the following
methods.
Select Control Panel > View devices and printers (Printers, Printers and Faxes). Next, click the printer icon and
then click Print server properties at the top of the screen to display the properties window.
Maintaining the Printer
>
Installing or Uninstalling Applications Separately
>
Installing the Applications Separ
…
107
Click the Driver tab. If your printer name is displayed in the list, a genuine Epson printer driver is installed on
your computer.
Related Information
&“Installing the Applications Separately” on page 106
Checking if a genuine Epson printer driver is installed - Mac OS
You can check if a genuine Epson printer driver is installed on your computer by using one of the following
methods.
Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
select the printer. Click Options & Supplies, and if the Options tab and Utility tab are displayed on the window, a
genuine Epson printer driver is installed on your computer.
Maintaining the Printer
>
Installing or Uninstalling Applications Separately
>
Installing the Applications Separ
…
108
Related Information
&“Installing the Applications Separately” on page 106
Adding the Printer (for Mac OS Only)
1. Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax).
2. Click +, and then select your printer on the screen displayed.
3. Select your printer from Use.
4. Click Add.
Note:
If your printer is not listed, check that it is correctly connected to the computer and that the printer is on.
Uninstalling Applications
Log in to your computer as an administrator. Enter the administrator password if the computer prompts you.
Uninstalling Applications - Windows
1. Press the
P
button to turn o the printer.
2. Quit all running applications.
3. Open Control Panel:
❏Windows 10
Click on the start button, and then select Windows System > Control Panel.
❏Windows 8.1/Windows 8
Select Desktop > Settings > Control Panel.
❏Windows 7
Click the start button and select Control Panel.
4. Open Uninstall a program (or Add or Remove Programs):
Select Uninstall a program in Programs.
5. Select the application you want to uninstall.
You cannot uninstall the printer driver if there is any print jobs. Delete or wait to be printed the jobs before
uninstalling.
6. Uninstall the applications:
Click Uninstall/Change or Uninstall.
Note:
If the User Account Control window is displayed, click Continue.
Maintaining the Printer
>
Installing or Uninstalling Applications Separately
>
Uninstalling Applications
109
7. Follow the on-screen instructions.
Uninstalling Applications - Mac OS
1. Download the Uninstaller using EPSON Soware Updater.
Once you have downloaded the Uninstaller, you do not need to download it again each time you uninstall the
application.
2. Press the
P
button to turn o the printer.
3. To uninstall the printer driver, select System Preferences from the Apple menu > Printers & Scanners (or
Print & Scan, Print & Fax), and then remove the printer from the enabled printers list.
4. Quit all running applications.
5. Select Go > Applications > Epson Soware > Uninstaller.
6. Select the application you want to uninstall, and then click Uninstall.
c
Important:
e Uninstaller removes all drivers for Epson inkjet printers on the computer. If you use multiple Epson inkjet
printers and you only want to delete some drivers, delete all of them rst, and then install the necessary printer
driver again.
Note:
If you cannot nd the application you want to uninstall in the application list, you cannot uninstall using the
Uninstaller. In this situation, select Go > Applications > Epson Soware, select the application you want to uninstall,
and then drag it to the trash icon.
Related Information
&“Application for Updating Soware and Firmware (EPSON Soware Updater)” on page 202
Updating Applications and Firmware
You may be able to clear certain problems and improve or add functions by updating the applications and the
rmware. Make sure you use the latest version of the applications and rmware.
1. Make sure that the printer and the computer are connected, and the computer is connected to the internet.
2. Start EPSON Soware Updater, and update the applications or the rmware.
c
Important:
Do not turn o the computer or the printer until the update is complete; otherwise, the printer may
malfunction.
Maintaining the Printer
>
Installing or Uninstalling Applications Separately
>
Updating Applications and Firm
…
110
Note:
If you cannot nd the application you want to update in the list, you cannot update using the EPSON Soware Updater.
Check for the latest versions of the applications from your local Epson website.
http://www.epson.com
Related Information
&“Application for Updating Soware and Firmware (EPSON Soware Updater)” on page 202
Updating the Printer's Firmware Using the Control Panel
If the printer is connected to the Internet, you can update the printer's rmware using the control panel. By
updating the rmware, the printer's performance may improve, or new functions may be added. You can also set
the printer to regularly check for rmware updates and notify you if any are available.
1. Select on the printer's control panel.
2. Select General Settings > Firmware Update > Update.
Note:
Enable Notication to set the printer to regularly check for available rmware updates.
3. Check the message displayed on the screen and select Start Checking.
4. Check the message displayed on the screen and select Start.
e rmware is updated when new rmware is found. Once the update has started, it cannot be interrupted.
c
Important:
❏Do not turn o or unplug the printer until the update is complete. Doing so may result in malfunction of the
printer.
❏If the rmware update is not completed or is unsuccessful, the printer does not start up normally and
"Recovery Mode" is displayed on the LCD screen the next time the printer is turned on. In this situation, you
need to update the rmware again using a computer. Connect the printer to the computer with a USB cable.
While "Recovery Mode" is displayed on the printer, you cannot update the rmware over a network
connection. On the computer, access your local Epson website, and then download the latest printer
rmware. See the instructions on the website for the next steps.
Transporting and Storing the Printer
When you need to store the printer or transport it when moving or for repairs, follow the steps below to pack the
printer.
1. Turn o the printer by pressing the
P
button.
Maintaining the Printer
>
Transporting and Storing the Printer
111
2. Make sure the power light turns o, and then unplug the power cord.
c
Important:
Unplug the power cord when the power light is o. Otherwise, the print head may not return to the home
position causing the ink to dry, and printing may become impossible.
3. Disconnect all cables such as the power cord and USB cable.
4. Remove all of the paper from the printer.
5. Open the printer cover. Secure the print head to the case with tape.
6. Close the printer cover.
Maintaining the Printer
>
Transporting and Storing the Printer
112
7. Prepare to pack the printer as shown below.
8. Pack the printer in its box, using the protective materials.
c
Important:
❏When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏Do not remove the ink cartridges from the product when storing or transporting the product.
When you use the printer again, make sure you remove the tape securing the print head. If print quality has
declined the next time you print, clean and align the print head.
Related Information
&“Checking and Cleaning the Print Head” on page 101
&“Aligning the Print Head” on page 105
Maintaining the Printer
>
Transporting and Storing the Printer
113
Solving Problems
e Printer Does Not Work as Expected.................................115
A Message is Displayed on the LCD Screen...............................138
Paper Gets Jammed................................................139
It is Time to Replace the Ink Cartridges................................. 140
It is Time to Replace the Maintenance Box...............................142
Print Quality is Poor...............................................143
Cannot Solve Problem..............................................151
The Printer Does Not Work as Expected
The Printer Does Not Turn On or O
Power Does Not Turn On
e following causes can be considered.
The power cord is not plugged in properly to the electrical outlet.
Solutions
Make sure the power cord is securely plugged in.
The
P
button was not pressed for long enough.
Solutions
Hold down the
P
button for a little longer.
Power Does Not Turn O
The
P
button was not pressed for long enough.
Solutions
Hold down the
P
button for a little longer. If you still cannot turn o the printer, unplug the power cord.
To prevent the print head from drying out, turn the printer back on and turn it o by pressing the
P
button.
Power Turns O Automatically
The Power O Settings or Power O Timer feature is enabled.
Solutions
❏Select > General Settings > Basic Settings > Power O Settings, and then disable the Power O
If Inactive and Power O If Disconnected settings.
❏Select > General Settings > Basic Settings, and then disable the Power O Timer Setting.
Note:
Your product may have the Power O Settings or Power O Timer feature depending on the location of purchase.
Paper Does Not Feed Properly
No Paper Feeds
e following causes can be considered.
Solving Problems
>
The Printer Does Not Work as Expected
>
Paper Does Not Feed Properly
115
The installation location is inappropriate.
Solutions
Place the printer on a at surface and operate in the recommended environmental conditions.
&“Environmental Specications” on page 215
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
&“Available Paper and Capacities” on page 180
&“Unavailable Paper Types” on page 188
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
&“Paper Handling Precautions” on page 26
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specied for the paper.
&“Available Paper and Capacities” on page 180
The paper settings on the printer are incorrect.
Solutions
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
&“Paper Size and Type Settings” on page 27
Paper Feeds at a Slant
e following causes can be considered.
The installation location is inappropriate.
Solutions
Place the printer on a at surface and operate in the recommended environmental conditions.
&“Environmental Specications” on page 215
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
&“Available Paper and Capacities” on page 180
Solving Problems
>
The Printer Does Not Work as Expected
>
Paper Does Not Feed Properly
116
&“Unavailable Paper Types” on page 188
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
&“Paper Handling Precautions” on page 26
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
&“Loading Paper” on page 26
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specied for the paper.
&“Available Paper and Capacities” on page 180
The paper settings on the printer are incorrect.
Solutions
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
&“Paper Size and Type Settings” on page 27
Several Sheets of Paper are Fed at a Time
e following causes can be considered.
The installation location is inappropriate.
Solutions
Place the printer on a at surface and operate in the recommended environmental conditions.
&“Environmental Specications” on page 215
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
&“Available Paper and Capacities” on page 180
&“Unavailable Paper Types” on page 188
Solving Problems
>
The Printer Does Not Work as Expected
>
Paper Does Not Feed Properly
117
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
&“Paper Handling Precautions” on page 26
The paper is moist or damp.
Solutions
Load new paper.
Static electricity is causing sheets of paper to stick to each other.
Solutions
Fan the paper before loading. If the paper still does not feed, load one sheet of paper at a time.
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specied for the paper.
&“Available Paper and Capacities” on page 180
The paper settings on the printer are incorrect.
Solutions
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
&“Paper Size and Type Settings” on page 27
Multiple sheets of paper feed at the same time during manual 2-sided printing.
Solutions
Remove any paper that is loaded in the paper source before you reload the paper.
Paper Does Not Feed Properly from the Front Paper Feeder
Paper has been fed at an angle from the front paper feeder.
Solutions
Aer inserting paper, make sure the railing edge of the paper is aligned with the line on the front paper
feeder.
Roll Paper Does Not Feed Properly
Front paper feeder opens when loading roll paper.
Solutions
Close the front paper feeder, and load roll paper.
Solving Problems
>
The Printer Does Not Work as Expected
>
Paper Does Not Feed Properly
118
CD/DVD Tray is Ejected when You Try to Load It
The disc has not been placed properly.
Solutions
Place the disc again properly.
&“Loading a CD/DVD” on page 36
The CD/DVD tray was inserted before the printer was ready.
Solutions
Do not insert the CD/DVD tray until you are instructed to do so. Otherwise, an error occurs and the tray
is ejected.
Cannot Print
Cannot Print from Windows
Make sure the computer and the printer are connected correctly.
e cause and solution to the problem dier depending on whether or not they are connected.
Checking the Connection Status
Use EPSON Status Monitor 3 to check the connection status for the computer and the printer.
1. Access the printer driver.
❏Windows 10
Click on the start button, and then select Windows System > Control Panel > View devices and printers
in Hardware and Sound. Right-click on your printer, or press and hold it and then select Printing
preferences
❏Windows 8.1/Windows 8
Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound. Right-
click on your printer, or press and hold it and then select Printing preferences
❏Windows 7
Click the start button, and select Control Panel > View devices and printers in Hardware and Sound.
Right-click on your printer and select Printing preferences.
2. Click the Utility tab.
3. Click EPSON Status Monitor 3.
If EPSON Status Monitor 3 is disabled, click Speed and Progress on the Utility tab, and then clear Disable
EPSON Status Monitor 3.
When the remaining ink levels are displayed, a connection has been successfully established between the computer
and the printer.
Check the following if a connection has not been established.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
119
❏e printer is not recognized over a network connection
“Cannot connect to a Network” on page 120
❏e printer is not recognized using a USB connection
“e Printer Cannot Connect by USB (Windows)” on page 122
Check the following if a connection has been established.
❏e printer is recognized, but printing cannot be performed.
“Cannot Print Even ough a Connection has been Established (Windows)” on page 123
Cannot connect to a Network
e problem could be one of the following issues.
Something is wrong with the network devices for Wi-Fi connection.
Solutions
Turn o the devices you want to connect to the network. Wait for about 10 seconds, and then turn on the
devices in the following order; wireless router, computer or smart device, and then printer. Move the
printer and computer or smart device closer to the wireless router to help with radio wave
communication, and then try to make network settings again.
Devices cannot receive signals from the wireless router because they are too far apart.
Solutions
Aer moving the computer or the smart device and the printer closer to the wireless router, turn o the
wireless router, and then turn it back on.
When changing the wireless router, the settings do not match the new router.
Solutions
Make the connection settings again so that they match the new wireless router.
&“When Replacing the Wireless Router” on page 155
The SSIDs connected from the computer or smart device and computer are dierent.
Solutions
When you are using multiple wireless routers at the same time or the wireless router has multiple SSIDs
and devices are connected to dierent SSIDs, you cannot connect to the wireless router.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
120
Connect the computer or smart device to the same SSID as the printer.
A privacy separator on the wireless router is available.
Solutions
Most wireless routers have a privacy separator feature that blocks communication between connected
devices. If you cannot communicate between the printer and the computer or smart device even if they
are connected to the same network, disable the privacy separator on the wireless router. See the manual
provided with the wireless router for details.
The IP address is incorrectly assigned.
Solutions
If the IP address assigned to the printer is 169.254.XXX.XXX, and the subnet mask is 255.255.0.0, the IP
address may not be assigned correctly.
Select > General Settings > Network Settings > Advanced on the printer’s control panel, and then
check the IP address and the subnet mask assigned to the printer.
Restart the wireless router or reset the network settings for the printer.
&“Re-setting the Network Connection” on page 155
There is a problem with the network settings on the computer.
Solutions
Try accessing any website from your computer to make sure that your computer's network settings are
correct. If you cannot access any website, there is a problem on the computer.
Check the network connection of the computer. See the documentation provided with the computer for
details.
The printer has been connected by Ethernet using devices that support IEEE802.3az (Energy
Ecient Ethernet).
Solutions
When you connect the printer by Ethernet using devices that support IEEE802.3az (Energy Ecient
Ethernet), the following problems may occur depending on the hub or router that you are using.
❏Connection becomes unstable, the printer is connected and disconnected again and again.
❏Cannot connect to the printer.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
121
❏e communication speed becomes slow.
Follow the steps below to disable IEEE802.3az for the printer and then connect.
1. Remove the Ethernet cable connected to the computer and the printer.
2. When IEEE802.3az for the computer is enabled, disable it.
See the documentation provided with the computer for details.
3. Connect the computer and the printer with an Ethernet cable directly.
4. On the printer, print a network connection report.
“Printing a Network Connection Report” on page 172
5. Check the printer's IP address on the network connection report.
6. On the computer, access Web Cong.
Launch a Web browser, and then enter the printer's IP address.
“Running Web Cong on a Web Browser” on page 201
7. Select the Network tab > Wired LAN.
8. Select OFF for IEEE 802.3az.
9. Click Next.
10. Click OK.
11. Remove the Ethernet cable connected to the computer and the printer.
12. If you disabled IEEE802.3az for the computer in step 2, enable it.
13. Connect the Ethernet cables that you removed in step 1 to the computer and the printer.
If the problem still occurs, devices other than the printer may be causing the problem.
The Printer Cannot Connect by USB (Windows)
e following causes can be considered.
The USB cable is not plugged into the electrical outlet correctly.
Solutions
Connect the USB cable securely to the printer and the computer.
There is a problem with the USB hub.
Solutions
If you are using a USB hub, try to connect the printer directly to the computer.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
122
There is a problem with the USB cable or the USB inlet.
Solutions
If the USB cable cannot be recognized, change the port, or change the USB cable.
Cannot Print Even Though a Connection has been Established (Windows)
e following causes can be considered.
A genuine Epson printer driver has not been installed.
Solutions
If a genuine Epson printer driver (EPSON XXXXX) has not been installed, the available functions are
limited. We recommend using a genuine Epson printer driver.
&“Checking if a genuine Epson printer driver is installed - Windows” on page 107
&“Checking if a genuine Epson printer driver is installed - Mac OS” on page 108
There is a problem with the software or data.
Solutions
❏If you are printing a large data size image, the computer may run out of memory. Print the image at a
lower resolution or a smaller size.
❏If you have tried all of the solutions and have not solved the problem, try uninstalling and then
reinstalling the printer driver
&“Installing or Uninstalling Applications Separately” on page 106
There is a problem with the printer's status.
Solutions
Click EPSON Status Monitor 3 on the printer driver's Utility tab, and then check the printer status. If
EPSON Status Monitor 3 is disabled, click Speed and Progress on the Utility tab, and then clear Disable
EPSON Status Monitor 3.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
123
There is still a job waiting to be printed.
Solutions
Click Print Queue on the printer driver's Utility tab. If unnecessary data remains, select Cancel all
documents from the Printer menu.
The printer is pending or oine.
Solutions
Click Print Queue on the printer driver's Utility tab.
If the printer is oine or pending, clear the oine or pending setting from the Printer menu.
The printer is not selected as the default printer.
Solutions
Right-click the printer icon in Control Panel > View devices and printers (or Printers, Printers and
Faxes) and click Set as default printer.
Note:
If there are multiple printer icons, see the following to select the correct printer.
Example)
USB connection: EPSON XXXX Series
Network connection: EPSON XXXX Series (network)
If you install the printer driver multiple times, copies of the printer driver may be created. If copies such
as "EPSON XXXX Series (copy 1)" are created, right-click the copied driver icon, and then click Remove
Device.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
124
The printer port is not set correctly.
Solutions
Click Print Queue on the printer driver's Utility tab.
Make sure the printer port is set correctly as shown below in Property > Port from the Printer menu.
USB connection: USBXXX, Network connection: EpsonNet Print Port
Suddenly the Printer Cannot Print over a Network Connection
e problem could be one of the following issues.
The network environment has been changed.
Solutions
When you have changed the network environment, such as the wireless router or provider, try making
network settings for the printer again.
Connect the computer or smart device to the same SSID as the printer.
&“Re-setting the Network Connection” on page 155
Something is wrong with the network devices for Wi-Fi connection.
Solutions
Turn o the devices you want to connect to the network. Wait for about 10 seconds, and then turn on the
devices in the following order; wireless router, computer or smart device, and then printer. Move the
printer and computer or smart device closer to the wireless router to help with radio wave
communication, and then try to make network settings again.
The printer is not connected to the network.
Solutions
Select > General Settings > Network Settings > Connection Check, and then print the network
connection report. If the report shows that the network connection failed, check the network connection
report and then follow the printed solutions.
&“Printing a Network Connection Report” on page 172
There is a problem with the network settings on the computer.
Solutions
Try accessing any website from your computer to make sure that your computer's network settings are
correct. If you cannot access any website, there is a problem on the computer.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
125
Check the network connection of the computer. See the documentation provided with the computer for
details.
There is still a job waiting to be printed.
Solutions
Click Print Queue on the printer driver's Utility tab. If unnecessary data remains, select Cancel all
documents from the Printer menu.
The printer is pending or oine.
Solutions
Click Print Queue on the printer driver's Utility tab.
If the printer is oine or pending, clear the oine or pending setting from the Printer menu.
The printer is not selected as the default printer.
Solutions
Right-click the printer icon in Control Panel > View devices and printers (or Printers, Printers and
Faxes) and click Set as default printer.
Note:
If there are multiple printer icons, see the following to select the correct printer.
Example)
USB connection: EPSON XXXX Series
Network connection: EPSON XXXX Series (network)
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
126
If you install the printer driver multiple times, copies of the printer driver may be created. If copies such
as "EPSON XXXX Series (copy 1)" are created, right-click the copied driver icon, and then click Remove
Device.
The printer port is not set correctly.
Solutions
Click Print Queue on the printer driver's Utility tab.
Make sure the printer port is set correctly as shown below in Property > Port from the Printer menu.
USB connection: USBXXX, Network connection: EpsonNet Print Port
Cannot Print from Mac OS
Make sure the computer and the printer are connected correctly.
e cause and solution to the problem dier depending on whether or not they are connected.
Checking the Connection Status
Use EPSON Status Monitor to check the connection status for the computer and the printer.
1. Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer.
2. Click Options & Supplies > Utility > Open Printer Utility.
3. Click EPSON Status Monitor.
When the remaining ink levels are displayed, a connection has been successfully established between the computer
and the printer.
Check the following if a connection has not been established.
❏e printer is not recognized over a network connection
“Cannot connect to a Network” on page 127
❏e printer is not recognized using a USB connection
“e Printer Cannot Connect by USB (Mac OS)” on page 130
Check the following if a connection has been established.
❏e printer is recognized, but printing cannot be performed.
“Cannot Print Even ough a Connection has been Established (Mac OS)” on page 131
Cannot connect to a Network
e problem could be one of the following issues.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
127
Something is wrong with the network devices for Wi-Fi connection.
Solutions
Turn o the devices you want to connect to the network. Wait for about 10 seconds, and then turn on the
devices in the following order; wireless router, computer or smart device, and then printer. Move the
printer and computer or smart device closer to the wireless router to help with radio wave
communication, and then try to make network settings again.
Devices cannot receive signals from the wireless router because they are too far apart.
Solutions
Aer moving the computer or the smart device and the printer closer to the wireless router, turn o the
wireless router, and then turn it back on.
When changing the wireless router, the settings do not match the new router.
Solutions
Make the connection settings again so that they match the new wireless router.
&“When Replacing the Wireless Router” on page 155
The SSIDs connected from the computer or smart device and computer are dierent.
Solutions
When you are using multiple wireless routers at the same time or the wireless router has multiple SSIDs
and devices are connected to dierent SSIDs, you cannot connect to the wireless router.
Connect the computer or smart device to the same SSID as the printer.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
128
A privacy separator on the wireless router is available.
Solutions
Most wireless routers have a privacy separator feature that blocks communication between connected
devices. If you cannot communicate between the printer and the computer or smart device even if they
are connected to the same network, disable the privacy separator on the wireless router. See the manual
provided with the wireless router for details.
The IP address is incorrectly assigned.
Solutions
If the IP address assigned to the printer is 169.254.XXX.XXX, and the subnet mask is 255.255.0.0, the IP
address may not be assigned correctly.
Select > General Settings > Network Settings > Advanced on the printer’s control panel, and then
check the IP address and the subnet mask assigned to the printer.
Restart the wireless router or reset the network settings for the printer.
&“Re-setting the Network Connection” on page 155
There is a problem with the network settings on the computer.
Solutions
Try accessing any website from your computer to make sure that your computer's network settings are
correct. If you cannot access any website, there is a problem on the computer.
Check the network connection of the computer. See the documentation provided with the computer for
details.
The device connected to the USB 3.0 port causes radio frequency interference.
Solutions
When you connect a device to the USB 3.0 port on a Mac, radio frequency interference may occur. Try
the following if you cannot connect to wireless LAN (Wi-Fi) or if operations become unstable.
❏Place the device that is connected to the USB 3.0 port further away from the computer.
❏Connect to the SSID for the 5 GHz range.
&“Making Wi-Fi Settings by Entering the SSID and Password” on page 159
The printer has been connected by Ethernet using devices that support IEEE802.3az (Energy
Ecient Ethernet).
Solutions
When you connect the printer by Ethernet using devices that support IEEE802.3az (Energy Ecient
Ethernet), the following problems may occur depending on the hub or router that you are using.
❏Connection becomes unstable, the printer is connected and disconnected again and again.
❏Cannot connect to the printer.
❏e communication speed becomes slow.
Follow the steps below to disable IEEE802.3az for the printer and then connect.
1. Remove the Ethernet cable connected to the computer and the printer.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
129
2. When IEEE802.3az for the computer is enabled, disable it.
See the documentation provided with the computer for details.
3. Connect the computer and the printer with an Ethernet cable directly.
4. On the printer, print a network connection report.
“Printing a Network Connection Report” on page 172
5. Check the printer's IP address on the network connection report.
6. On the computer, access Web Cong.
Launch a Web browser, and then enter the printer's IP address.
“Running Web Cong on a Web Browser” on page 201
7. Select the Network tab > Wired LAN.
8. Select OFF for IEEE 802.3az.
9. Click Next.
10. Click OK.
11. Remove the Ethernet cable connected to the computer and the printer.
12. If you disabled IEEE802.3az for the computer in step 2, enable it.
13. Connect the Ethernet cables that you removed in step 1 to the computer and the printer.
If the problem still occurs, devices other than the printer may be causing the problem.
The Printer Cannot Connect by USB (Mac OS)
e following causes can be considered.
The USB cable is not plugged into the electrical outlet correctly.
Solutions
Connect the USB cable securely to the printer and the computer.
There is a problem with the USB hub.
Solutions
If you are using a USB hub, try to connect the printer directly to the computer.
There is a problem with the USB cable or the USB inlet.
Solutions
If the USB cable cannot be recognized, change the port, or change the USB cable.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
130
Cannot Print Even Though a Connection has been Established (Mac OS)
e following causes can be considered.
A genuine Epson printer driver has not been installed.
Solutions
If a genuine Epson printer driver (EPSON XXXXX) has not been installed, the available functions are
limited. We recommend using a genuine Epson printer driver.
&“Checking if a genuine Epson printer driver is installed - Windows” on page 107
&“Checking if a genuine Epson printer driver is installed - Mac OS” on page 108
There is a problem with the software or data.
Solutions
❏If you are printing a large data size image, the computer may run out of memory. Print the image at a
lower resolution or a smaller size.
❏If you have tried all of the solutions and have not solved the problem, try uninstalling and then
reinstalling the printer driver
&“Installing or Uninstalling Applications Separately” on page 106
There is a problem with the status of the printer.
Solutions
Make sure the printer status is not Pause.
Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax),
and then double-click the printer. If the printer is paused, click Resume.
Suddenly the Printer Cannot Print over a Network Connection
e problem could be one of the following issues.
The network environment has been changed.
Solutions
When you have changed the network environment, such as the wireless router or provider, try making
network settings for the printer again.
Connect the computer or smart device to the same SSID as the printer.
&“Re-setting the Network Connection” on page 155
Something is wrong with the network devices for Wi-Fi connection.
Solutions
Turn o the devices you want to connect to the network. Wait for about 10 seconds, and then turn on the
devices in the following order; wireless router, computer or smart device, and then printer. Move the
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
131
printer and computer or smart device closer to the wireless router to help with radio wave
communication, and then try to make network settings again.
The printer is not connected to the network.
Solutions
Select > General Settings > Network Settings > Connection Check, and then print the network
connection report. If the report shows that the network connection failed, check the network connection
report and then follow the printed solutions.
&“Printing a Network Connection Report” on page 172
There is a problem with the network settings on the computer.
Solutions
Try accessing any website from your computer to make sure that your computer's network settings are
correct. If you cannot access any website, there is a problem on the computer.
Check the network connection of the computer. See the documentation provided with the computer for
details.
Cannot Print from Smart Device
Make sure the smart device and the printer are connected correctly.
e cause and solution to the problem dier depending on whether or not they are connected.
Checking the Connection Status
Use Epson Smart Panel to check the connection status for the smart device and the printer.
Search for and install Epson Smart Panel from App Store or Google Play if it is not already installed.
1. On the smart device, start Epson Smart Panel.
2. Check that the printer image or the remaining ink levels are displayed on the home screen.
When the printer image or the remaining ink levels are displayed, a connection has been successfully
established between the smart device and the printer.
If the they are not displayed, a connection has not been established between the smart device and the printer.
Check the following if a connection has not been established.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
132
❏e printer is not recognized over a network connection
“Cannot connect to a Network” on page 133
Check the following if a connection has been established.
❏e printer is recognized, but printing cannot be performed.
“Cannot Print Even ough a Connection has been Established (iOS)” on page 134
Cannot connect to a Network
e problem could be one of the following issues.
Something is wrong with the network devices for Wi-Fi connection.
Solutions
Turn o the devices you want to connect to the network. Wait for about 10 seconds, and then turn on the
devices in the following order; wireless router, computer or smart device, and then printer. Move the
printer and computer or smart device closer to the wireless router to help with radio wave
communication, and then try to make network settings again.
Devices cannot receive signals from the wireless router because they are too far apart.
Solutions
Aer moving the computer or the smart device and the printer closer to the wireless router, turn o the
wireless router, and then turn it back on.
When changing the wireless router, the settings do not match the new router.
Solutions
Make the connection settings again so that they match the new wireless router.
&“When Replacing the Wireless Router” on page 155
The SSIDs connected from the computer or smart device and computer are dierent.
Solutions
When you are using multiple wireless routers at the same time or the wireless router has multiple SSIDs
and devices are connected to dierent SSIDs, you cannot connect to the wireless router.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
133
Connect the computer or smart device to the same SSID as the printer.
A privacy separator on the wireless router is available.
Solutions
Most wireless routers have a privacy separator feature that blocks communication between connected
devices. If you cannot communicate between the printer and the computer or smart device even if they
are connected to the same network, disable the privacy separator on the wireless router. See the manual
provided with the wireless router for details.
The IP address is incorrectly assigned.
Solutions
If the IP address assigned to the printer is 169.254.XXX.XXX, and the subnet mask is 255.255.0.0, the IP
address may not be assigned correctly.
Select > General Settings > Network Settings > Advanced on the printer’s control panel, and then
check the IP address and the subnet mask assigned to the printer.
Restart the wireless router or reset the network settings for the printer.
&“Re-setting the Network Connection” on page 155
There is a problem with the network settings on the smart device.
Solutions
Try accessing any website from your smart device to make sure that your smart device's network settings
are correct. If you cannot access any website, there is a problem on the smart device.
Check the network connection of the computer. See the documentation provided with the smart device
for details.
Cannot Print Even Though a Connection has been Established (iOS)
e following causes can be considered.
Paper Setup Auto Display is disabled.
Solutions
Enable Paper Setup Auto Display in the following menu.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
134
> General Settings > Printer Settings > Paper Setup Auto Display
AirPrint is disabled.
Solutions
Enable the AirPrint setting on Web Cong.
&“Application for Conguring Printer Operations (Web Cong)” on page 201
Suddenly the Printer Cannot Print over a Network Connection
e problem could be one of the following issues.
The network environment has been changed.
Solutions
When you have changed the network environment, such as the wireless router or provider, try making
network settings for the printer again.
Connect the computer or smart device to the same SSID as the printer.
&“Re-setting the Network Connection” on page 155
Something is wrong with the network devices for Wi-Fi connection.
Solutions
Turn o the devices you want to connect to the network. Wait for about 10 seconds, and then turn on the
devices in the following order; wireless router, computer or smart device, and then printer. Move the
printer and computer or smart device closer to the wireless router to help with radio wave
communication, and then try to make network settings again.
The printer is not connected to the network.
Solutions
Select > General Settings > Network Settings > Connection Check, and then print the network
connection report. If the report shows that the network connection failed, check the network connection
report and then follow the printed solutions.
&“Printing a Network Connection Report” on page 172
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Print
135
There is a problem with the network settings on the smart device.
Solutions
Try accessing any website from your smart device to make sure that your smart device's network settings
are correct. If you cannot access any website, there is a problem on the smart device.
Check the network connection of the computer. See the documentation provided with the smart device
for details.
Cannot Operate the Printer as Expected
Operations are Slow
Printing Is Too Slow
e following causes can be considered.
Unnecessary applications are running.
Solutions
Close any unnecessary applications on your computer or smart device.
The print quality is set to high.
Solutions
Lower the quality setting.
Bidirectional printing is disabled.
Solutions
Enable the bidirectional (or high speed) setting. When this setting is enabled, the print head prints while
moving in both directions, and the printing speed increases.
❏Windows
Select Quality Options as the Level setting on the printer driver's Main tab, and then select High
Speed.
❏Mac OS
Select Print Settings from the print dialog's pop-up menu, and then select High Speed.
There may be network connection problems with the wireless router.
Solutions
Reboot the wireless router while taking into consideration other users connected to the network. If this
does not solve the problem, place the printer closer to your wireless router or see the documentation
provided with the access point.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Operate the Printer as Expected
136
The printer is printing high density data such as photos on plain paper.
Solutions
If you are printing high-density data such as photos on plain paper, printing may take some time to
maintain print quality. is is not a malfunction.
Printing Slows Down Dramatically During Continuous Printing
The function that prevents the printer mechanism from overheating and being damaged is
operating.
Solutions
You can continue printing. To return to normal printing speed, leave the printer idle for at least 30
minutes. Printing speed does not return to normal if the power is o.
LCD Screen Gets Dark
The printer is in sleep mode.
Solutions
Press the
P
button on the control panel to return the LCD screen to its former state.
The Output Tray has Come O
Insert the output tray straight into the printer. If the output tray stops halfway, insert and remove it several times.
The Root Certicate Needs to be Updated
The root certicate has expired.
Solutions
Run Web Cong, and then update the root certicate.
Solving Problems
>
The Printer Does Not Work as Expected
>
Cannot Operate the Printer as Expected
137
Cannot Cancel Printing from a Computer Running Mac OS X v10.6.8
There is a problem with your AirPrint setup.
Solutions
Run Web Cong, and then select Port9100 as the Top Priority Protocol setting in AirPrint Setup. Select
System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), remove
the printer, and then add the printer again.
&“Application for Conguring Printer Operations (Web Cong)” on page 201
A Message is Displayed on the LCD Screen
If an error message is displayed on the LCD screen, follow the on-screen instructions or the solutions below to
solve the problem.
Error Messages Solutions
The combination of the IP address and the subnet
mask is invalid. See your documentation for more
details.
Enter the correct IP address or default gateway. Contact the person
who setup the network for assistance.
Ink is low. You can continue printing until you are prompted to replace the ink
cartridges. However, note that the printer cannot print if any of the ink
cartridges is expended. Prepare new cartridges as soon as possible.
Ink cartridge(s) are low. Print job may not print
completely.
Select Continue printing or Replace before printing.
When you select Continue printing, the printer may stop printing
indicating that it is time to replace the ink cartridge. In this case,
follow the solutions below.
❏When printing fails and paper is ejected
Select No, cancel printing, and then replace the cartridge. If you
select Replace now, printing continues after you replace the
cartridge and more paper is wasted.
❏When paper is not ejected
Select Replace now, and then replace the cartridge. Printing is
resumed after you replace the cartridge, but the color may dier
slightly. To avoid this, select No, cancel printing.
You need to replace Ink Cartridge(s). To ensure you receive premium print quality and to help protect your
print head, a variable ink safety reserve remains in the cartridge when
your printer indicates it is time to replace the cartridge. Replace the
cartridge when you are prompted to do so.
“Replacing Ink Cartridge” on page 141
To use cloud services, update the root certicate
from the Epson Web Cong utility.
Run Web Cong, and then update the root certicate.
“Running Web Cong on a Web Browser” on page 201
Solving Problems
>
A Message is Displayed on the LCD Screen
138
Error Messages Solutions
Printer error. Turn the power o and on again. If
the problem persists, contact Epson Support.
Do the following.
1. Open the printer cover and remove any paper or protective
material inside the printer. Insert the front paper feeder completely.
“Paper Gets Jammed” on page 139
2. Close the printer cover and turn the power o and on again.
If the error message is still displayed after turning the power o and
on again, contact Epson support.
“Where to Get Help” on page 220
Paper Setup Auto Display is set to O. Some
features may not be available. For details, see your
documentation.
If Paper Setup Auto Display is disabled, you cannot use AirPrint.
Recovery Mode
Update Firmware
The printer has started in recovery mode because the rmware
update failed. Follow the steps below to try to update the rmware
again.
1. Connect the computer and the printer with a USB cable. (During
recovery mode, you cannot update the rmware over a network
connection.)
2. Visit your local Epson website for further instructions.
Paper Gets Jammed
Check the error displayed on the control panel and follow the instructions to remove the jammed paper including
any torn pieces. Next, clear the error. e LCD screen displays an animation that shows you how to remove
jammed paper.
!
Caution:
Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating, it
could cause an injury. Be careful not to touch the protruding parts to avoid injury.
c
Important:
Remove the jammed paper carefully. Removing the paper vigorously may cause damage to the printer.
Note:
When removing jammed paper from the inside of the printer, pull out the front paper feeder so that you can easily remove
the jammed paper.
Preventing Paper Jams
Check the following if paper jams occur frequently.
❏Place the printer on a at surface and operate in the recommended environmental conditions.
“Environmental Specications” on page 215
Solving Problems
>
Paper Gets Jammed
>
Preventing Paper Jams
139
❏Use the paper supported by this printer.
“Available Paper and Capacities” on page 180
❏Follow paper handling precautions.
“Paper Handling Precautions” on page 26
❏Load paper in the correct direction, and slide the edge guide against the edge of the paper.
“Loading Paper” on page 26
❏Do not load more than the maximum number of sheets specied for paper.
❏Load one sheet of paper at a time if you have loaded several sheets of paper.
❏Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
“List of Paper Types” on page 28
❏Insert the front paper feeder completely while you are not using it. If it is not inserted completely, paper may get
jammed when the printer feeds paper from the rear paper feeder.
It is Time to Replace the Ink Cartridges
Ink Cartridge Handling Precautions
Storing precautions for ink
❏Epson recommends storing ink cartridges in a cool and dark place.
❏For best results, Epson recommends using up ink cartridges before the best before date printed on the package,
or within six months of opening the package, whichever is earlier.
❏Aer bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at
least three hours before using it.
❏Do not open an ink cartridge package until you are ready to install the ink cartridge in the product.
❏Do not drop or knock it against hard objects; otherwise, the ink may leak.
Handling precautions for replacing ink cartridges
❏Do not touch the IC chip in the ink cartridge. Otherwise, you may not be able to perform operations or print
properly.
Solving Problems
>
It is Time to Replace the Ink Cartridges
>
Ink Cartridge Handling Precautions
140
❏Install all ink cartridges; otherwise you cannot print.
❏Do not turn o the printer during ink charging. If the ink charging is incomplete, you may not be able to print.
❏Removed ink cartridges may have ink around the ink supply port, so be careful not to get any ink on the
surrounding area when removing the cartridges.
❏is printer uses ink cartridges equipped with a green chip that monitors information such as the amount of
remaining ink for each cartridge. is means that even if the cartridge is removed from the printer before it is
expended, you can still use the cartridge aer reinserting it back into the printer.
❏To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve
remains in the cartridge when your printer indicates to replace the cartridge. e yields quoted for you do not
include this reserve.
❏Do not disassemble or remodel the ink cartridge, otherwise you may not be able to print normally.
❏Do not move the print head by hand; otherwise, the printer may be damaged.
❏While cartridges are in storage, keep the ink supply ports free of dust. e ink supply port has a valve in it so it
does not need to be capped.
❏Do not allow foreign objects to fall into the cartridge installation section.
❏When the printer is powered o with the
P
(power) button, the print head is automatically capped to prevent
the ink from drying. Do not pull out the power plug or turn o the breaker while the power is on.
❏If one of the installed ink cartridges is expended, printing cannot be performed.
❏If an ink cartridge is expended while printing, you can continue printing aer replacing the ink cartridge.
❏If you continue to use ink cartridges that are running low, you may need to replace the ink cartridge while
printing. If you replace the ink cartridge while printing, colors may look dierent depending on how the ink
dries. If you want to avoid issues such as this, we recommend replacing the cartridge before printing.
❏You can still use the removed ink cartridge in the future until the ink cartridge is expended.
Consumption of ink
❏All colors of ink are used during head cleaning and other non-printing maintenance operations to ensure that
the print heads remain in good condition.
❏Even for monochrome printing, all the ink colors are used in an operation designed to maintain the printing
and print head quality.
❏Depending on the paper type and print quality settings, colored inks may also be used for high-density blacks in
monochrome or grayscale printing.
❏e ink in the ink cartridges supplied with your printer is partly used during initial setup. In order to produce
high quality printouts, the print head in your printer will be fully charged with ink. is one-o process
consumes a quantity of ink and therefore these cartridges may print fewer pages compared to subsequent ink
cartridges.
❏Quoted yields may vary depending on the images that you are printing, the paper type that you are using, the
frequency of your prints and environmental conditions such as temperature.
Replacing Ink Cartridge
When a message is displayed prompting you to replace the ink cartridge, select How To and then view the
animations displayed on the control panel to learn how to replace the ink cartridge.
Solving Problems
>
It is Time to Replace the Ink Cartridges
>
Replacing Ink Cartridge
141
Related Information
&“Ink Cartridge Codes for SC-P900 Series” on page 193
&“Ink Cartridge Codes for SC-P700 Series” on page 194
&“Ink Cartridge Handling Precautions” on page 140
It is Time to Replace the Maintenance Box
Maintenance Box Handling Precautions
Read the following instructions before replacing the maintenance box.
❏Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
❏Do not replace the maintenance box during printing; otherwise, ink may leak.
❏Do not remove the maintenance box or open its cover except when replacing the maintenance box; otherwise
ink may leak.
❏Do not reuse a maintenance box which has been removed and le detached for a long period. Ink inside the box
will have solidied and no more ink can be absorbed.
❏Do not tilt the used maintenance box until aer it is sealed in the plastic bag; otherwise ink may leak.
❏Do not store the maintenance box in high or freezing temperatures.
❏Keep the maintenance box out of direct sunlight.
❏Do not drop the maintenance box or subject it to strong shocks.
❏Do not touch the openings in the maintenance box as you may get smeared with ink.
Replacing a Maintenance Box
In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink
leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the
maintenance box has reached its limit. Whether and how oen this is required will vary according to the number
of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs.
When a message is displayed prompting you to replace the maintenance box, refer to the animations displayed on
the control panel. e need for replacement of the box does not mean that your printer has ceased to operate in
accordance with its specications. e Epson warranty does not cover the cost of this replacement. It is a user-
serviceable part.
Note:
When it is full, you cannot print and clean the print head until the maintenance box is replaced to avoid ink leakage.
Solving Problems
>
It is Time to Replace the Maintenance Box
>
Replacing a Maintenance Box
142
Related Information
&“Maintenance Box Code” on page 196
&“Maintenance Box Handling Precautions” on page 142
Print Quality is Poor
Color Missing, Banding, or Unexpected Colors Appear in Printout
The print head nozzles may be clogged.
Solutions
Perform a nozzle check to see if the print head nozzles are clogged. Perform a nozzle check, and then
clean the print head if any of the print head nozzles are clogged. If you have not used the printer for a
long time, the print head nozzles may be clogged and ink drops may not be discharged.
&“Checking and Cleaning the Print Head” on page 101
Printing is paused.
Solutions
Do not open the printer cover or the front paper feeder during printing. If you open the printer cover or
the front paper feeder during printing, printing is paused and it may cause unexpected colors in the
printout.
Blurry Prints, Vertical Banding, or Misalignment
e following causes can be considered.
The print head position is out of alignment.
Solutions
On the printer's control panel, select > Maintenance > Print Head Alignment to align the print
head.
Solving Problems
>
Print Quality is Poor
143
The bidirectional printing setting is enabled.
Solutions
If print quality does not improve even aer aligning the print head, disable the bidirectional setting.
During bidirectional (or high speed) printing, the print head prints while moving in both directions, and
vertical lines may be misaligned. Disabling this setting may slow down printing speed but improve print
quality.
❏Windows
Select Quality Options as the Level setting on the printer driver's Main tab, and then clear High
Speed.
❏Mac OS
Select Print Settings from the print dialog's pop-up menu, and then clear High Speed.
Printout Comes Out as a Blank Sheet
The print settings and the paper size loaded in the printer are dierent.
Solutions
Change the print settings according to the paper size loaded in the printer. Load paper in the printer that
matches the print settings.
Multiple sheets of paper are fed into the printer at the same time.
Solutions
See the following to prevent multiple sheets of paper being fed into the printer at the same time.
&“Several Sheets of Paper are Fed at a Time” on page 117
The print head nozzles may be clogged.
Solutions
Perform the nozzle check, and then run the head cleaning or Power Cleaning if the print head nozzles are
clogged.
&“Checking and Cleaning the Print Head” on page 101
Solving Problems
>
Print Quality is Poor
144
Paper Is Smeared or Scued
e following causes can be considered.
Paper is loaded incorrectly.
Solutions
When horizontal banding (perpendicular to the printing direction) appears, or the top or bottom of the
paper is smeared, load paper in the correct direction and slide the edge guides to the edges of the paper.
&“Loading Paper” on page 26
The paper path is smeared.
Solutions
When vertical banding (horizontal to the printing direction) appears, or the paper is smeared, clean the
paper path.
&“Cleaning the Paper Path for Ink Smears” on page 105
The paper is curled.
Solutions
Place the paper on a at surface to check if it is curled. If it is, atten it.
The print head is rubbing the surface of the paper.
Solutions
When printing on thick paper, the print head is close to the printing surface and the paper may be
scued. In this case, enable the reduce scu setting.
On the printer's control panel, select > General Settings > Printer Settings, and then enable ick
Paper.
The back of the paper was printed before the side that had already been printed was dry.
Solutions
When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the
paper.
Solving Problems
>
Print Quality is Poor
145
Printed Photos are Sticky
The print was made on the wrong side of the photo paper.
Solutions
Make sure you are printing on the printable side. When printing on the wrong side of the photo paper,
you need to clean the paper path.
&“Cleaning the Paper Path for Ink Smears” on page 105
Images or Photos are Printed in Unexpected Colors
e following causes can be considered.
The print head nozzles may be clogged.
Solutions
Perform a nozzle check to see if the print head nozzles are clogged. Perform a nozzle check, and then
clean the print head if any of the print head nozzles are clogged. If you have not used the printer for a
long time, the print head nozzles may be clogged and ink drops may not be discharged.
&“Checking and Cleaning the Print Head” on page 101
Color correction has been applied.
Solutions
When printing from the Windows printer driver, the Epson auto photo adjustment setting
(PhotoEnhance) is applied by default depending on the paper type. Try change the setting.
On the Windows printer driver's Main tab, select Advanced in Mode. Change the Scene Correction
setting from Auto Correct to any other option. If changing the setting does not work, use any color
correction method other than PhotoEnhance in Mode.
&“Adjusting the Print Color” on page 85
Solving Problems
>
Print Quality is Poor
146
Colors in the Printout Dier from Those on the Display
The color properties for the display device you are using have not been adjusted correctly.
Solutions
Display devices such as computer screens have their own display properties. If the display is unbalanced,
the image are not displayed with proper brightness and colors. Adjust the properties of the device. Next,
perform the following.
❏Windows
Select EPSON Standard (sRGB) as the Mode setting on the printer driver's Main tab.
❏Mac OS
Select EPSON Standard (sRGB) as the Color Settings setting from the print dialog's Print Settings
menu.
The display device is reecting external light.
Solutions
Avoid direct sunlight and conrm the image where an appropriate illuminance is assured.
The display device has a high resolution.
Solutions
Colors may dier from what you see on smart devices such as smart phones or tablets with high-
resolution displays.
The display device and the printer have a dierent process of producing colors.
Solutions
Colors on a display are not quite identical to those on paper because the display device and the printer
have a dierent process of producing colors. Adjust the color properties so that the colors are identical.
Cannot Print Without Margins
Solving Problems
>
Print Quality is Poor
147
Borderless is not set in the print settings.
Solutions
Make borderless setting in the print settings. If you select a paper type that does not support borderless
printing, you cannot select Borderless. Select a paper type that supports borderless printing.
❏Windows
Select Borderless on the printer driver's Main tab.
❏Mac OS
Select a borderless paper size from Paper Size.
&“Available Paper and Capacities” on page 180
Edges of the Image are Cropped During Borderless Printing
Because the image is slightly enlarged, the protruding area is cropped.
Solutions
Select a smaller enlargement setting.
❏Windows
Click Expansion next to the Borderless checkbox on the printer driver's Main tab, and then change
the settings.
❏Mac OS
Change the Expansion setting from the print dialog's Page Layout Settings menu.
The Position, Size, or Margins of the Printout Are Incorrect
e following causes can be considered.
Solving Problems
>
Print Quality is Poor
148
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
&“Loading Paper” on page 26
The size of the paper is set incorrectly.
Solutions
Select the appropriate paper size setting.
The margin setting in the application software is not within the print area.
Solutions
Adjust the margin setting in the application so that it falls within the printable area.
&“Printable Area” on page 209
Printed Characters Are Incorrect or Garbled
e following causes can be considered.
The USB cable is not connected correctly.
Solutions
Connect the USB cable securely to the printer and the computer.
There is a job waiting to be printed.
Solutions
Cancel any paused print jobs.
The computer has been manually put into the Hibernate mode or the Sleep mode while
printing.
Solutions
Do not put the computer manually into the Hibernate mode or the Sleep mode while printing. Pages of
garbled text may be printed next time you start the computer.
Solving Problems
>
Print Quality is Poor
149
The Printed Image Is Inverted
The image is set to invert horizontally in the print settings.
Solutions
Clear any mirror image settings in the printer driver or the application.
❏Windows
Clear Mirror Image on the printer driver’s Layout tab.
❏Mac OS
Clear Flip Horizontal from the print dialog's Layout menu.
Mosaic-Like Patterns in the Prints
Images or photos with a low resolution were printed.
Solutions
When printing images or photos, print using high-resolution data. Images on web sites are oen low
resolution although they look good enough on the display, and so print quality may decline.
Vertical lines Appears on Roll Paper
Solving Problems
>
Print Quality is Poor
150
Rollers on the roll paper unit are smeared.
Solutions
If you are printing on glossy roll paper with the SC-P900 Series printer and uneven vertical lines appear,
remove the paper from the roll paper unit, and clean the rollers using a dry, so, clean cloth. Rotate the
rollers as you wipe them to clean the entire surface.
Cannot Solve Problem
If you cannot solve the problem aer trying all of the solutions, contact Epson support.
If you cannot solve printing problems, see the following related information.
Related Information
&“Cannot Solve Printing Problems” on page 151
Cannot Solve Printing Problems
Try the following problems in order starting at the top until you solve the problem.
❏Make sure you match the paper type loaded in the printer and the paper type set on the printer to the paper
type settings in the printer driver.
“Paper Size and Type Settings” on page 27
❏Use a higher quality setting on the control panel or the printer driver.
❏Reinstall the ink cartridges already installed in the printer.
Reinstalling the ink cartridges may clear clogging in the print head nozzles and allow the ink to ow smoothly.
However, because the ink is consumed when the ink cartridge is reinstalled, a message asking you to replace the
ink cartridge may be displayed depending on the amount of ink remaining.
“It is Time to Replace the Ink Cartridges” on page 140
❏Align the print head.
“Aligning the Print Head” on page 105
Solving Problems
>
Cannot Solve Problem
>
Cannot Solve Printing Problems
151
❏Run a nozzle check to see if the print head nozzles are clogged.
If there are missing segments in the nozzle check pattern, the nozzles may be clogged. Repeat head cleaning and
the nozzle check alternately 3 times and check if the clogging has cleared.
Note that print head cleaning uses some ink.
“Checking and Cleaning the Print Head” on page 101
❏Turn o the printer, wait for at least 6 hours, and then check if the clogging has cleared.
If the problem is clogging, leaving the printer for a while without printing may solve the problem.
You can check the following items while the printer is o.
❏Check that you are using genuine Epson ink cartridges.
Try to use genuine Epson ink cartridges. is product is designed to adjust colors based on the use of genuine
Epson ink cartridges. e use of non-genuine ink cartridges may cause print quality to decline.
“Consumable Products Information” on page 193
❏Make sure that there are no paper fragments le inside the printer.
When you remove the paper, do not touch the translucent lm with your hand or the paper.
❏Check the paper.
Check if the paper is curled or loaded with the printable side facing up.
“Paper Handling Precautions” on page 26
“Available Paper and Capacities” on page 180
“Unavailable Paper Types” on page 188
❏Make sure that you are not using an old ink cartridge.
For best results, Epson recommends using up ink cartridges before the best before date printed on the package,
or within six months of opening the package, whichever is earlier.
❏If you turn o the printer, wait for at least 6 hours, and if print quality has still not improved, run Power
Cleaning.
“Running Power Cleaning” on page 103
If you cannot solve the problem by checking the solutions above, you may need to request repairs. Contact Epson
support.
Related Information
&“Before Contacting Epson” on page 221
&“Contacting Epson Support” on page 221
Solving Problems
>
Cannot Solve Problem
>
Cannot Solve Printing Problems
152
Adding or Replacing the Computer or
Devices
Connecting to a Printer that has been Connected to the Network...............154
Re-setting the Network Connection....................................155
Connecting a Smart Device and Printer Directly (Wi-Fi Direct)................162
Checking the Network Connection Status................................171
Connecting to a Printer that has been Connected to
the Network
When the printer has already been connected to the network, you can connect a computer or a smart device to the
printer over the network.
Using a Network Printer from a Second Computer
We recommend using the installer to connect the printer to a computer. You can run the installer using one of the
following methods.
❏Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏Setting up using the soware disc (only for the models that come with a soware disc and users with Windows
computers with disc drives.)
Insert the soware disc into the computer, and then follow the on-screen instructions.
Selecting the Printer
Follow the on-screen instructions until the following screen is displayed, select the printer name you want to
connect to, and then click Next.
Follow the on-screen instructions.
Adding or Replacing the Computer or Devices
>
Connecting to a Printer that has been Connected t
…
154
Using a Network Printer from a Smart Device
You can connect a smart device to the printer using one of the following methods.
Connecting over a wireless router
Connect the smart device to the same Wi-Fi network (SSID) as the printer.
See the following for more details.
“Making Settings for Connecting to the Smart Device” on page 156
Connecting by Wi-Fi Direct
Connect the smart device to the printer directly without a wireless router.
See the following for more details.
“Connecting a Smart Device and Printer Directly (Wi-Fi Direct)” on page 162
Re-setting the Network Connection
is section explains how to make the network connection settings and change the connection method when
replacing the wireless router or the computer.
When Replacing the Wireless Router
When you replace the wireless router, make settings for the connection between the computer or the smart device
and the printer.
You need to make these settings if you change your Internet service provider and so on.
Making Settings for Connecting to the Computer
We recommend using the installer to connect the printer to a computer. You can run the installer using one of the
following methods.
❏Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏Setting up using the soware disc (only for the models that come with a soware disc and users with Windows
computers with disc drives.)
Insert the soware disc into the computer, and then follow the on-screen instructions.
Selecting the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
When Repl
…
155
Select Change connection method for printer (for new network router or changing USB to network, etc.) on
the Select Your Operation screen, and then click Next.
Follow the on-screen instructions.
If you cannot connect, see the following to try to solve the problem.
❏Windows: “Cannot connect to a Network” on page 120
❏Mac OS: “Cannot connect to a Network” on page 127
Making Settings for Connecting to the Smart Device
You can use the printer from a smart device when you connect the printer to the same Wi-Fi network (SSID) as the
smart device. To use the printer from a smart device, set up from the following website. Access to the website from
the smart device that you want to connect to the printer.
http://epson.sn > Setup
When Changing the Computer
When changing the computer, make connection settings between the computer and the printer.
Making Settings for Connecting to the Computer
We recommend using the installer to connect the printer to a computer. You can run the installer using one of the
following methods.
❏Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
When Chan
…
156
❏Setting up using the soware disc (only for the models that come with a soware disc and users with Windows
computers with disc drives.)
Insert the soware disc into the computer, and then follow the on-screen instructions.
Follow the on-screen instructions.
Changing the Connection Method to the Computer
is section explains how to change the connection method when the computer and the printer have been
connected.
Changing the Network Connection from Ethernet to Wi-Fi
Change the Ethernet connection to Wi-Fi connection from the printer's control panel. e changing connection
method is basically the same as the Wi-Fi connection settings.
Related Information
&“Making Wi-Fi Settings from the Control Panel” on page 159
Changing the Network Connection from Wi-Fi to Ethernet
Follow the steps below to change from a Wi-Fi connection to an Ethernet connection.
1. Tap on the printer's control panel.
2. Tap General Settings > Network Settings > Wired LAN Setup.
3. Tap Start Setup.
4. Check the message, and then tap OK.
5. Connect the printer to the router with an Ethernet cable.
Changing from USB to a Network Connection
Using the installer and re-set up in a dierent connection method.
❏Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏Setting up using the soware disc (only for the models that come with a soware disc and users with Windows
computers with disc drives.)
Insert the soware disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
Changing t
…
157
Select Change connection method for printer (for new network router or changing USB to network, etc.) on
the Select Your Operation screen, and then click Next.
Select the network connection that you want to use, Connect via wireless network (Wi-Fi) or Connect via wired
LAN (Ethernet), and then click Next.
Follow the on-screen instructions.
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
Changing t
…
158
Making Wi-Fi Settings from the Control Panel
You can make network settings from the printer's control panel in several ways. Choose the connection method
that matches the environment and conditions that you are using.
If you know the information for the wireless router such as SSID and password, you can make settings manually.
If the wireless router supports WPS, you can make settings by using push button setup.
Aer connecting the printer to the network, connect to the printer from the device that you want to use (computer,
smart device, tablet, and so on.)
Making Wi-Fi Settings by Entering the SSID and Password
You can set up a Wi-Fi network by entering the information necessary to connect to a wireless router from the
printer's control panel. To set up using this method, you need the SSID and password for a wireless router.
Note:
If you are using a wireless router with its default settings, the SSID and password are on the label. If you do not know the
SSID and password, see the documentation provided with the wireless router.
1. Tap on the home screen.
2. Tap Wi-Fi (Recommended).
If the printer has already been connected by Ethernet, tap Router.
3. Tap Start Setup.
If the network connection is already set up, the connection details are displayed. Tap Change Settings to
change the settings.
If the printer has already been connected by Ethernet, tap Change to Wi-Fi connection., and then tap Yes
aer conrming the message.
4. Tap Wi-Fi Setup Wizard.
5. Select the SSID for the wireless router.
Note:
❏If the SSID you want to connect to is not displayed on the printer’s control panel, tap Search Again to update the list.
If it is still not displayed, tap Enter Manually, and then enter the SSID directly.
❏If you do not know the network name (SSID) check if the information is written on the label of the wireless router. If
you are using the wireless router with its default settings, use the SSID on the label. If you cannot nd any
information, see the documentation provided with the wireless router.
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
Making Wi-
…
159
6. Tap the Enter Password eld, and then enter the password.
Note:
❏e password is case-sensitive.
❏If you do not know the password, check if the information is written on the label of the wireless router. On the label,
the password may be written "Network Key", "Wireless Password", and so on. If you are using the wireless router
with its default settings, use the password written on the label.
7. When you have setup nished, tap Start Setup.
8. Tap Close.
e screen automatically closes aer a specic length of time if you do not tap Close.
Note:
If you fail to connect, load A4 size plain paper, and then tap Print Check Report to print a connection report.
9. Tap Close on the network connection settings screen.
Related Information
&“Entering Characters” on page 24
&“Checking the Network Connection Status” on page 171
Making Wi-Fi Settings by Push Button Setup (WPS)
You can automatically set up a Wi-Fi network by pressing a button on the wireless router. If the following
conditions are met, you can set up by using this method.
❏e wireless router is compatible with WPS (Wi-Fi Protected Setup).
❏e current Wi-Fi connection was established by pressing a button on the wireless router.
1. Tap on the home screen.
2. Tap Wi-Fi (Recommended).
If the printer has been already connected by Ethernet, tapRouter.
3. Tap Start Setup.
If the network connection is already set up, the connection details are displayed. Tap Change Settings to
change the settings.
If the printer has been already connected by Ethernet, tap Change to Wi-Fi connection., and then tap Yes
aer conrming the message.
4. Tap Push Button Setup(WPS).
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
Making Wi-
…
160
5. Hold down the [WPS] button on the wireless router until the security light ashes.
If you do not know where the [WPS] button is, or there are no buttons on the wireless router, see the
documentation provided with your wireless router for details.
6. Tap Start Setup.
7. Tap Close.
e screen automatically closes aer a specic length of time if you do not tap Close.
Note:
If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a
network connection report and check the solution.
8. Tap Close on the network connection settings screen.
Related Information
&“Checking the Network Connection Status” on page 171
Making Wi-Fi Settings by PIN Code Setup (WPS)
You can automatically connect to an wireless router by using a PIN code. You can use this method to set up if an
wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the wireless
router.
1. Tap on the home screen.
2. Tap Wi-Fi (Recommended).
If the printer has been already connected by Ethernet, tap Router.
3. Tap Start Setup.
If the network connection is already set up, the connection details are displayed. Tap Change Settings to
change the settings.
If the printer has been already connected by Ethernet, tap Change to Wi-Fi connection., and then tap Yes
aer conrming the message.
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
Making Wi-
…
161
4. Tap Others > PIN Code Setup(WPS).
5. Use your computer to enter the PIN code (an eight digit number) displayed on the printer's control panel into
the wireless router within two minutes.
Note:
See the documentation provided with your wireless router for details on entering a PIN code.
6. Tap Start Setup on the printer's control panel.
7. Tap Close.
e screen automatically closes aer a specic length of time if you do not tap Close.
Note:
If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a
connection report and check the solution.
8. Tap Close on the network connection settings screen.
Related Information
&“Checking the Network Connection Status” on page 171
Connecting a Smart Device and Printer Directly (Wi-Fi
Direct)
Wi-Fi Direct (Simple AP) allows you to connect a smart device directly to the printer without a wireless router and
print from the smart device.
About Wi-Fi Direct
Use this connection method when you are not using Wi-Fi at home or at the oce, or when you want to connect
the printer and the computer or smart device directly. In this mode, the printer acts as an wireless router and you
can connect the devices to the printer without having to use a standard wireless router. However, devices directly
connected to the printer cannot communicate with each other through the printer.
Adding or Replacing the Computer or Devices
>
Connecting a Smart Device and Printer Directly (Wi
…
162
e printer can be connected by Wi-Fi or Ethernet, and Wi-Fi Direct (Simple AP) connection simultaneously.
However, if you start a network connection in Wi-Fi Direct (Simple AP) connection when the printer is connected
by Wi-Fi, the Wi-Fi is temporarily disconnected.
Connecting to an iPhone, iPad or iPod touch using Wi-Fi Direct
is method allows you to connect the printer directly to an iPhone, iPad or iPod touch without a wireless router.
e following conditions are required to use this function. If your environment does not match these conditions,
you can connect by selecting Other OS Devices. See the related information link below for details on connecting.
❏iOS 11 or later
❏Using the standard camera application to scan the QR code
❏Epson Smart Panel version 1.0 or later
Epson printing app, such as Epson Smart Panel, is used to print from a smart device. Install Epson printing app on
the smart device in advance.
Note:
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1. Tap on the home screen.
2. Tap Wi-Fi Direct.
3. Tap Start Setup.
4. Tap iOS.
Adding or Replacing the Computer or Devices
>
Connecting a Smart Device and Printer Directly (Wi
…
163
e QR code is displayed on the printer's control panel.
5. On your iPhone, iPad or iPod touch, start the standard Camera app, and then scan the QR code displayed on
the printer's control panel in PHOTO mode.
Use the Camera app for iOS 11 or later. You cannot connect to the printer using the Camera app for iOS 10 or
earlier. Also, you cannot connect using an app for scanning QR codes. If you cannot connect, select Other
Methods on the printer's control panel. See the related information link below for details on connecting.
6. Tap the notication displayed on the screen of the iPhone, iPad or iPod touch.
7. Tap Join.
Adding or Replacing the Computer or Devices
>
Connecting a Smart Device and Printer Directly (Wi
…
164
8. On the printer's control panel, select Next.
9. On the iPhone, iPad or iPod touch, start Epson printing app.
Examples of Epson printing apps
10. On the Epson printing app screen, tap Printer is not selected..
On the Epson Smart Panel, the smart device automatically connects to the printer when it starts.
11. Select the printer that you want to connect to.
See the information displayed on the printer's control panel to select the printer.
12. On the printer's control panel, select Complete.
For smart devices that have been connected to the printer before, select the network name (SSID) on the smart
device's Wi-Fi screen to connect them again.
Related Information
&“Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)” on page 199
&“Connecting to Devices other than iOS and Android using Wi-Fi Direct” on page 167
Connecting to Android Devices using Wi-Fi Direct
is method allows you to connect the printer directly to your Android device without a wireless router. e
following conditions are required to use this function.
❏Android 4.4 or later
❏Epson Smart Panel version 1.0 or later
Epson Smart Panel is used to print from a smart device. Install Epson Smart Panel on the smart device in advance.
Adding or Replacing the Computer or Devices
>
Connecting a Smart Device and Printer Directly (Wi
…
165
Note:
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1. Tap on the home screen.
2. Tap Wi-Fi Direct.
3. Tap Start Setup.
4. Tap Android.
5. On the smart device, start Epson printing app.
Examples of Epson printing apps
6. On the Epson printing app screen, tap Printer is not selected..
On the Epson Smart Panel, the smart device automatically connects to the printer when it starts.
Adding or Replacing the Computer or Devices
>
Connecting a Smart Device and Printer Directly (Wi
…
166
7. Select the printer that you want to connect to.
See the information displayed on the printer's control panel to select the printer.
Note:
Printers may not been displayed depending on the Android device. If printers are not displayed, connect by selecting
Other OS Devices. See the related information link below for connecting.
8. When the device connection approval screen is displayed, select Approve.
9. On the printer's control panel, select Complete.
For smart devices that have been connected to the printer before, select the network name (SSID) on the smart
device's Wi-Fi screen to connect them again.
Related Information
&“Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)” on page 199
&“Connecting to Devices other than iOS and Android using Wi-Fi Direct” on page 167
Connecting to Devices other than iOS and Android using Wi-Fi
Direct
is method allows you to connect the printer directly to smart devices without a wireless router.
Note:
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1. Tap on the home screen.
2. Tap Wi-Fi Direct.
3. Tap Start Setup.
Adding or Replacing the Computer or Devices
>
Connecting a Smart Device and Printer Directly (Wi
…
167
7. On the printing app screen for the smart device, select the printer that you want to connect to.
See the information displayed on the printer's control panel to select the printer.
8. On the printer's control panel, select Complete.
For smart devices that have been connected to the printer before, select the network name (SSID) on the smart
device's Wi-Fi screen to connect them again.
Disconnecting Wi-Fi Direct (Simple AP) Connection
ere are two methods available to disable a Wi-Fi Direct (Simple AP) connection; you can disable all connections
by using the printer's control panel, or disable each connection from the computer or the smart device. When you
want to disable all connections, see the related information link below for details.
c
Important:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in
Wi-Fi Direct (Simple AP) connection are disconnected.
Note:
If you want to disconnect a specic device, disconnect from the device instead of the printer. Use one of the following
methods to disconnect the Wi-Fi Direct (Simple AP) connection from the device.
❏Disconnect the Wi-Fi connection to the printer's network name (SSID).
❏Connect to another network name (SSID).
Related Information
&“Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID” on page 170
Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID
When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from > Wi-Fi Direct
> Start Setup > Change, and then the following menu items are displayed.
Adding or Replacing the Computer or Devices
>
Connecting a Smart Device and Printer Directly (Wi
…
170
Change Network Name
Change the Wi-Fi Direct (simple AP) network name (SSID) used for connecting to the printer to your arbitrary
name. You can set the network name (SSID) in ASCII characters that is displayed on the soware keyboard on the
control panel. You can enter up to 22 characters.
When changing the network name (SSID), all connected devices are disconnected. Use the new network name
(SSID) if you want to re-connect the device.
Change Password
Change the Wi-Fi Direct (simple AP) password for connecting to the printer to your arbitrary value. You can set
the password in ASCII characters that is displayed on the soware keyboard on the control panel. You can enter 8
to 22 characters.
When changing the password, all connected devices are disconnected. Use the new password if you want to re-
connect the device.
Change Frequency Range
Change the frequency range of Wi-Fi Direct used for connecting to the printer. You can select 2.4 GHz or 5 GHz.
When changing the frequency range, all connected devices are disconnected. Re-connect the device.
Note that you cannot re-connect from devices that do not support 5 GHz frequency range when changing to 5
GHz.
Depending on the region, this setting may not be displayed.
Disable Wi-Fi Direct
Disable Wi-Fi Direct (simple AP) settings of the printer. When disabling it, all devices connected to the printer in
Wi-Fi Direct (Simple AP) connection are disconnected.
Restore Default Settings
Restore all Wi-Fi Direct (simple AP) settings to their defaults.
e Wi-Fi Direct (simple AP) connection information of the smart device saved to the printer is deleted.
Note:
You can also set up from the Network tab > Wi-Fi Direct on Web Cong for the following settings.
❏Enabling or disabling Wi-Fi Direct (simple AP)
❏Changing network name (SSID)
❏Changing password
❏Changing the frequency range
Depending on the region, this setting may not be displayed.
❏Restoring the Wi-Fi Direct (simple AP) settings
Checking the Network Connection Status
You can check the network connection status in the following way.
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
171
Checking the Network Connection Status from the Control Panel
You can check the network connection status using the network icon or the network information on the printer’s
control panel.
Checking the Network Connection Status using the Network Icon
You can check the network connection status and strength of the radio wave using the network icon on the
printer's home screen.
Related Information
&“Guide to the Network Icon” on page 21
Displaying Detailed Network Information on the Control Panel
When your printer is connected to the network, you can also view other network-related information by selecting
the network menus you want to check.
1. Tap on the printer's control panel.
2. Select General Settings > Network Settings > Network Status.
3. To check the information, select the menus that you want to check.
❏Wired LAN/Wi-Fi Status
Displays the network information (device name, connection, signal strength, obtain IP address, and so on)
for Ethernet or Wi-Fi connections.
❏Wi-Fi Direct Status
Displays whether Wi-Fi Direct (Simple AP) is enabled or disabled for Wi-Fi Direct (Simple AP)
connections.
❏Print Status Sheet
Prints a network status sheet. e information for Ethernet, Wi-Fi, Wi-Fi Direct (Simple AP), and so on is
printed on two or more pages.
Printing a Network Connection Report
You can print a network connection report to check the status between the printer and the wireless router.
1. Load papers.
2. Tap on the printer's control panel.
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
>
Printi
…
172
3. Tap General Settings > Network Settings > Connection Check.
e connection check starts.
4. Tap Print Check Report.
5. Follow the instructions on the printer's screen to print the network connection report.
If an error has occurred, check the network connection report, and then follow the printed solutions.
6. Tap Close.
Messages and Solutions on the Network Connection Report
Check the messages and error codes on the network connection report, and then follow the solutions.
a. Error code
b. Messages on the Network Environment
Related Information
&“E-1” on page 174
&“E-2, E-3, E-7” on page 174
&“E-5” on page 175
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
>
Printi
…
173
&“E-6” on page 175
&“E-8” on page 175
&“E-9” on page 176
&“E-10” on page 176
&“E-11” on page 176
&“E-12” on page 177
&“E-13” on page 177
&“Message on the Network Environment” on page 178
E-1
Solutions:
❏Make sure the Ethernet cable is securely connected to your printer and to your hub or other network device.
❏Make sure your hub or other network device is turned on.
❏If you want to connect the printer by Wi-Fi, make Wi-Fi settings for the printer again because it is disabled.
E-2, E-3, E-7
Solutions:
❏Make sure your wireless router is turned on.
❏Conrm that your computer or device is connected correctly to the wireless router.
❏Tur n o the wireless router. Wait for about 10 seconds, and then turn it on.
❏Place the printer closer to your wireless router and remove any obstacles between them.
❏If you have entered the SSID manually, check if it is correct. Check the SSID from the Network Status part on
the network connection report.
❏If an wireless router has multiple SSIDs, select the SSID that is displayed. When the SSID is using a non-
compliant frequency, the printer does not display them.
❏If you are using push button setup to establish a network connection, make sure your wireless router supports
WPS. You cannot use push button setup if your wireless router does not support WPS.
❏Makes sure your SSID uses only ASCII characters (alphanumeric characters and symbols). e printer cannot
display an SSID that contains non-ASCII characters.
❏Makes sure you know your SSID and password before connecting to the wireless router. If you are using a
wireless router with its default settings, the SSID and password are located on a label on the wireless router. If
you do not know your SSID and password, contact the person who set up the wireless router, or see the
documentation provided with the wireless router.
❏If you are connecting to an SSID generated from a tethering smart device, check for the SSID and password in
the documentation provided with the smart device.
❏If your Wi-Fi connection suddenly disconnects, check for the conditions below. If any of these conditions are
applicable, reset your network settings by downloading and running the soware from the following website.
http://epson.sn > Setup
❏Another smart device was added to the network using push button setup.
❏e Wi-Fi network was set up using any method other than push button setup.
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
>
Printi
…
174
Related Information
&“Making Settings for Connecting to the Computer” on page 156
&“Making Wi-Fi Settings from the Control Panel” on page 159
E-5
Solutions:
Make sure the wireless router’s security type is set to one of the following. If it is not, change the security type on
the wireless router, and then reset the printer’s network settings.
❏WEP-64 bit (40 bit)
❏WEP-128 bit (104 bit)
❏WPA PSK (TKIP/AES)
*
❏WPA2 PSK (TKIP/AES)
*
❏WPA (TKIP/AES)
❏WPA2 (TKIP/AES)
❏WPA3-SAE (AES)
* WPA PSK is also known as WPA Personal. WPA2 PSK is also known as WPA2 Personal.
E-6
Solutions:
❏Check if MAC address ltering is disabled. If it is enabled, register the printer’s MAC address so that it is not
ltered. See the documentation provided with the wireless router for details. You can check the printer’s MAC
address from the Network Status part on the network connection report.
❏If your wireless router is using shared authentication with WEP security, make sure the authentication key and
index are correct.
❏If the number of connectable devices on the wireless router is less than the number of network devices that you
want to connect, make settings on the wireless router to increase the number of connectable devices. See the
documentation provided with the wireless router to make settings.
Related Information
&“Making Settings for Connecting to the Computer” on page 156
E-8
Solutions:
❏Enable DHCP on the wireless router if the printer’s Obtain IP Address setting is set to Auto.
❏If the printer’s Obtain IP Address setting is set to Manual, the IP address you manually set is invalid due to out
of range (for example: 0.0.0.0). Set a valid IP address from the printer’s control panel.
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
>
Printi
…
175
Related Information
&“Network Settings” on page 205
E-9
Solutions:
Check the following.
❏Devices are turned on.
❏You can access the Internet and other computers or network devices on the same network from the devices you
want to connect to the printer.
If still does not connect your printer and network devices aer conrming the above, turn o the wireless router.
Wait for about 10 seconds, and then turn it on. en reset your network settings by downloading and running the
installer from the following website.
http://epson.sn > Setup
Related Information
&“Making Settings for Connecting to the Computer” on page 156
E-10
Solutions:
Check the following.
❏Other devices on the network are turned on.
❏Network addresses (IP address, subnet mask, and default gateway) are correct if you have set the printer’s
Obtain IP Address to Manual.
Reset the network address if they are incorrect. You can check the IP address, subnet mask, and default gateway
from the Network Status part on the network connection report.
If DHCP is enabled, change the printer’s Obtain IP Address setting to Auto. If you want to set the IP address
manually, check the printer’s IP address from the Network Status part on the network connection report, and then
select Manual on the network settings screen. Set the subnet mask to [255.255.255.0].
If still does not connect your printer and network devices, turn o the wireless router. Wait for about 10 seconds,
and then turn it on.
Related Information
&“Network Settings” on page 205
E-11
Solutions:
Check the following.
❏e default gateway address is correct if you set the printer’s TCP/IP Setup setting to Manual.
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
>
Printi
…
176
❏e device that is set as the default gateway is turned on.
Set the correct default gateway address. You can check the default gateway address from the Network Status part
on the network connection report.
Related Information
&“Network Settings” on page 205
E-12
Solutions:
Check the following.
❏Other devices on the network are turned on.
❏e network addresses (IP address, subnet mask, and default gateway) are correct if you are entering them
manually.
❏e network addresses for other devices (subnet mask and default gateway) are the same.
❏e IP address does not conict with other devices.
If still does not connect your printer and network devices aer conrming the above, try the following.
❏Turn o the wireless router. Wait for about 10 seconds, and then turn it on.
❏Make network settings again using the installer. You can run it from the following website.
http://epson.sn > Setup
❏You can register several passwords on a wireless router that uses WEP security type. If several passwords are
registered, check if the rst registered password is set on the printer.
Related Information
&“Network Settings” on page 205
&“Making Settings for Connecting to the Computer” on page 156
E-13
Solutions:
Check the following.
❏Network devices such as a wireless router, hub, and router are turned on.
❏e TCP/IP Setup for network devices has not been set up manually. (If the printer’s TCP/IP Setup is set
automatically while the TCP/IP Setup for other network devices is performed manually, the printer’s network
may dier from the network for other devices.)
If it still does not work aer checking the above, try the following.
❏Turn o the wireless router. Wait for about 10 seconds, and then turn it on.
❏Make network settings on the computer that is on the same network as the printer using the installer. You can
run it from the following website.
http://epson.sn > Setup
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
>
Printi
…
177
❏You can register several passwords on a wireless router that uses the WEP security type. If several passwords are
registered, check if the rst registered password is set on the printer.
Related Information
&“Network Settings” on page 205
&“Making Settings for Connecting to the Computer” on page 156
Message on the Network Environment
Message Solution
The Wi-Fi environment needs to be
improved. Turn the wireless router o and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.
After moving the printer closer to the wireless router and removing any
obstacles between them, turn o the wireless router. Wait for about 10
seconds, and then turn it on. If it still does not connect, see the
documentation supplied with the wireless router.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.
Computer and smart devices that can be connected simultaneously are
connected in full in the Wi-Fi Direct (Simple AP) connection. To add another
computer or smart device, disconnect one of the connected devices or
connect it to the other network rst.
You can conrm the number of wireless devices which can be connected
simultaneously and the number of connected devices by checking the
network status sheet or the printer’s control panel.
The same SSID as Wi-Fi Direct exists in the
environment. Change the Wi-Fi Direct SSID
if you cannot connect a smart device to the
printer.
On the printer’s control panel, go to Wi-Fi Direct Setup screen and select the
menu to change the setting. You can change the network name following
after DIRECT-XX-. Enter within 22 characters.
Printing a Network Status Sheet
You can check the detailed network information by printing it.
1. Load papers.
2. Tap on the printer's control panel.
3. Tap General Settings > Network Settings > Network Status.
4. Tap Print Status Sheet.
5. Check the message, and then print the network status sheet.
6. Tap Close.
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
>
Printi
…
178
Product Information
Paper Information.................................................180
Consumable Products Information.....................................193
Soware Information.............................................. 196
Settings Menu List.................................................203
Product Specications..............................................208
Regulatory Information.............................................217
Paper Information
Available Paper and Capacities
Genuine Epson Paper for SC-P900 Series
Epson recommends using genuine Epson paper to ensure high-quality printouts.
Note:
e availability of paper varies by location. For the latest information on paper available in your area, contact Epson
support.
Even if "✓" is attached to borderless printing availability, borderless printing may not be possible depending on the
Level selected in the printer driver.
Paper suitable for printing documents
Media Name Size Loading
Capacity
(Sheets)
ICC Prole Borderless Black ink
Bright White Ink Jet
Paper
A3 40 Epson_SC-
P900_700_Sta
ndard.icc
✓
*
Matte Black
A4 80
* You can specify and perform borderless printing; however, margins may appear or the print quality may decline due to the
paper expanding or contracting.
Paper suitable for printing photos
Media Name Size Loading
Capacity
(Sheets)
ICC Prole Borderless Black ink
Premium Glossy
Photo Paper
A2 1 Epson_SC-
P900_700_Eps
onPremiumGlo
ssy.icc
✓Photo Black
A3+, A3 10
A4 20
13x18 cm (5x7in.),
16:9 wide
size(102x181 mm),
10x15 cm (4x6 in.)
30
Premium Semigloss
Photo Paper
A2 1 Epson_SC-
P900_700_Eps
onPremiumSe
migloss.icc
✓Photo Black
A3+, A3 10
A4 20
10x15 cm (4x6 in.) 30
Product Information
>
Paper Information
>
Available Paper and Capacities
180
Media Name Size Loading
Capacity
(Sheets)
ICC Prole Borderless Black ink
Photo Paper Glossy A4, 13x18 cm (5x7in.),
10x15 cm (4x6 in.)
30 Epson_SC-
P900_700_Pho
toPaperGlossy.i
cc
✓Photo Black
Watercolor Paper -
Radiant White
A3+ 1 Epson_SC-
P900_700_Wat
ercolorPaperRa
diantWhite.icc
✓Matte Black
Velvet Fine Art Paper A2, A3+, A3 1 Epson_SC-
P900_700_Velv
etFineArtPaper.
icc
✓Matte Black
UltraSmooth Fine Art
Paper
A2, A3+ 1 Epson_SC-
P900_700_Ultr
aSmoothFineA
rtPaper.icc
✓Matte Black
Matte Paper-
Heavyweight
A3+, A3 10 Epson_SC-
P900_700_Arc
hivalMattePap
er.icc
✓Matte Black
A4 30
Epson Premium
Luster Photo Paper
A3+, A3 10 Epson_SC-
P900_700_Pre
miumLusterPh
otoPaper.icc
✓Photo Black
A4 30
Paper suitable for printing documents and photos
Media Name Size Loading
Capacity
(Sheets)
ICC Prole Borderless Black ink
Archival Matte Paper A2 1 Epson_SC-
P900_700_Arc
hivalMattePap
er.icc
✓Matte Black
A3+, A3 10
A4 30
Photo Quality Ink Jet
Paper
A2 10 Epson_SC-
P900_700_Sta
ndard.icc
✓Matte Black
A3+, A3 50
A4 60
Double-Sided Matte
Paper
A4 1 Epson_SC-
P900_700_Arc
hivalMattePap
er.icc
- Matte Black
Product Information
>
Paper Information
>
Available Paper and Capacities
181
Various other paper types
Media Name Size Loading
Capacity
(Sheets)
ICC Prole Borderless Black ink
Photo Quality Self
Adhesive Sheets
A4 1 Epson_SC-
P900_700_Arc
hivalMattePap
er.icc
- Matte Black
Epson Proong Paper
White Semimatte
A3+ 1 Epson_SC-
P900_700_Pro
ongPaperWhi
teSemimatte.ic
c
✓Photo Black
Roll Paper
z
Media Name Size Size Borderless Black ink
Premium Glossy
Photo Paper (250)
329 mm (A3+), 406 mm/16" Epson_SC-
P900_700_Eps
onPremiumGlo
ssy.icc
✓
*
Photo Black
Premium Semigloss
Photo Paper (250)
329 mm (A3+), 406 mm/16" Epson_SC-
P900_700_Eps
onPremiumSe
migloss.icc
✓
*
Photo Black
Premium Luster Photo
Paper (260)
329 mm (A3+), 406 mm/16" Epson_SC-
P900_700_Pre
miumLusterPh
otoPaper.icc
✓Photo Black
Premium Semimatte
Photo Paper (260)
406 mm/16" Epson_SC-
P900_700_Pre
miumLusterPh
otoPaper.icc
-Photo Black
Enhanced Matte
Paper
406 mm/16" Epson_SC-
P900_700_Arc
hivalMattePap
er.icc
- Matte Black
* There are no left and right borders.
Genuine Epson Paper for SC-P700 Series
Epson recommends using genuine Epson paper to ensure high-quality printouts.
Note:
e availability of paper varies by location. For the latest information on paper available in your area, contact Epson
support.
Even if "✓" is attached to borderless printing availability, borderless printing may not be possible depending on the
Level selected in the printer driver.
Product Information
>
Paper Information
>
Available Paper and Capacities
182
Paper suitable for printing documents
Media Name Size Loading
Capacity
(Sheets)
ICC Prole Borderless Black ink
Bright White Ink Jet
Paper
A3 40 Epson_SC-
P900_700_Sta
ndard.icc
✓
*
Matte Black
A4 80
* You can specify and perform borderless printing; however, margins may appear or the print quality may decline due to the
paper expanding or contracting.
Paper suitable for printing photos
Media Name Size Loading
Capacity
(Sheets)
ICC Prole Borderless Black ink
Premium Glossy
Photo Paper
A3+, A3 10 Epson_SC-
P900_700_Eps
onPremiumGlo
ssy.icc
✓Photo Black
A4 20
13x18 cm (5x7in.),
16:9 wide
size(102x181 mm),
10x15 cm (4x6 in.)
30
Premium Semigloss
Photo Paper
A3+, A3 10 Epson_SC-
P900_700_Eps
onPremiumSe
migloss.icc
✓Photo Black
A4 20
10x15 cm (4x6 in.) 30
Photo Paper Glossy A4, 13x18 cm (5x7in.),
10x15 cm (4x6 in.)
30 Epson_SC-
P900_700_Pho
toPaperGlossy.i
cc
✓Photo Black
Watercolor Paper -
Radiant White
A3+ 1 Epson_SC-
P900_700_Wat
ercolorPaperRa
diantWhite.icc
✓Matte Black
Velvet Fine Art Paper A3+, A3 1 Epson_SC-
P900_700_Velv
etFineArtPaper.
icc
✓Matte Black
UltraSmooth Fine Art
Paper
A3+ 1 Epson_SC-
P900_700_Ultr
aSmoothFineA
rtPaper.icc
✓Matte Black
Matte Paper-
Heavyweight
A3+, A3 10 Epson_SC-
P900_700_Arc
hivalMattePap
er.icc
✓Matte Black
A4 30
Product Information
>
Paper Information
>
Available Paper and Capacities
183
Media Name Size Loading
Capacity
(Sheets)
ICC Prole Borderless Black ink
Epson Premium
Luster Photo Paper
A3+, A3 10 Epson_SC-
P900_700_Pre
miumLusterPh
otoPaper.icc
✓Photo Black
A4 30
Paper suitable for printing documents and photos
Media Name Size Loading
Capacity
(Sheets)
ICC Prole Borderless Black ink
Archival Matte Paper A3+, A3 10 Epson_SC-
P900_700_Arc
hivalMattePap
er.icc
✓Matte Black
A4 30
Photo Quality Ink Jet
Paper
A3+, A3 50 Epson_SC-
P900_700_Sta
ndard.icc
✓Matte Black
A4 60
Double-Sided Matte
Paper
A4 1 Epson_SC-900
_700_Archival
MattePaper.icc
- Matte Black
Various other paper types
Media Name Size Loading
Capacity
(Sheets)
ICC Prole Borderless Black ink
Photo Quality Self
Adhesive Sheets
A4 1 Epson_SC-
P900_700_Arc
hivalMattePap
er.icc
- Matte Black
Epson Proong Paper
White Semimatte
A3+ 1 Epson_SC-
P900_700_Pro
ongPaperWhi
teSemimatte.ic
c
✓Photo Black
Roll Paper
z
Media Name Size Size Borderless Black ink
Premium Glossy
Photo Paper (250)
329 mm (A3+) Epson_SC-
P900_700_Eps
onPremiumGlo
ssy.icc
✓
*
Photo Black
Product Information
>
Paper Information
>
Available Paper and Capacities
184
Media Name Size Size Borderless Black ink
Premium Semigloss
Photo Paper (250)
329 mm (A3+) Epson_SC-
P900_700_Eps
onPremiumSe
migloss.icc
✓
*
Photo Black
Premium Luster Photo
Paper (260)
329 mm (A3+) Epson_SC-
P900_700_Pre
miumLusterPh
otoPaper.icc
✓Photo Black
* There are no left and right borders.
Commercially Available Paper for SC-P900 Series
Even if "✓" is attached to borderless printing availability, borderless printing may not be possible depending on the
Level selected in the printer driver.
Name Size Capacity Thickness Source Borderless
Plain paper (cut sheets) A2, A3+, A3, B4, Letter Up to 5mm
total
thickness
*1
0.08 to
0.11mm (64
to 90g/m)
Rear paper
feeder
-
Legal, A4, B5, A5, A6 Up to 12
mm total
thickness
*1
Non-standard sizes
Width: 89 to 431.8 mm
Length: 127 to 1200 mm
Up to 5mm
total
thickness
*1
Roll paper Smaller than 17"
(Outer diameter: smaller than
150mm)
1 0.08 to
0.11mm (64
to 90g/m)
Roll paper
unit
✓
*2
Product Information
>
Paper Information
>
Available Paper and Capacities
185
Name Size Capacity Thickness Source Borderless
Thick paper A2, 41×51 cm (16×20 in.),
279×356 mm (11×14 in.), A3+,
A3, 254×305 mm (10×12 in.),
43×56 cm (17×22 in.), 28×43
cm (11×17 in.), Letter, A4
1 0.29 to 0.5
mm
Rear paper
feeder
✓
*2
36×43 cm (14×17 in.), 30×30
cm (12×12 in.), JIS B3, JIS B4,
Half Letter, Legal
-
Non-standard sizes
Width: 89 to 431.8 mm
Length: 127 to 1200 mm
✓
*2
A2, 41×51 cm (16×20 in.),
279×356 mm (11×14 in.), A3+,
A3, 254×305 mm (10×12 in.),
43×56 cm (17×22 in.), 28×43
cm (11×17 in.), Letter, A4
1 0.51 to 0.7
mm
Front paper
feeder
✓
*2
36×43 cm (14×17 in.), 30×30
cm (12×12 in.), JIS B3, JIS B4,
Half Letter, Legal
-
Non-standard sizes
Width: 89 to 431.8 mm
Length: 127 to 1200 mm
✓
*2
A2, 41×51 cm (16×20 in.),
36×43 cm (14×17 in.), 30×30
cm (12×12 in.), 279×356 mm
(11×14 in.), A3+, A3, 254×305
mm (10×12 in.), JIS B3, JIS B4,
43×56 cm (17×22 in.), 28×43
cm (11×17 in.), Half Letter,
Legal, Letter, A4
11.2 to 1.5
mm
Front paper
feeder
-
Non-standard sizes
Width: 89 to 431.8 mm
Length: 127 to 1200 mm
Premium surface
CD/DVD
12 cm 1 – Disk tray -
CD/DVD 12 cm 1 – Disk tray -
*1: The number of sheets that can be set varies depending on the paper thickness.
*2: You can specify and perform borderless printing; however, margins may appear or the print quality may decline due to the
paper expanding or contracting. See the manual supplied with the paper and adjust settings as appropriate.
Commercially Available Paper for SC-P700 Series
Even if "✓" is attached to borderless printing availability, borderless printing may not be possible depending on the
Level selected in the printer driver.
Product Information
>
Paper Information
>
Available Paper and Capacities
186
Name Size Capacity Thickness Source Borderless
Plain paper (cut sheets) A3+, A3, B4, Letter Up to 5mm
total
thickness
*1
0.08 to 0.11
mm (64 to
90g/m)
Rear paper
feeder
-
Legal, A4, B5, A5, A6 Up to 12
mm total
thickness
*1
Non-standard sizes
Width: 89 to 329 mm
Length: 127 to 1200 mm
Up to 5mm
total
thickness
*1
Roll paper 329 mm (A3+ width)
431.8 mm (A2 width)
1 0.08 to 0.11
mm (64 to
90g/m)
Roll paper
unit
✓
*2
Thick paper 279×356 mm (11×14 in.), A3+,
A3, 254×305 mm (10×12 in.),
28×43 cm (11×17 in.), Letter,
A4
1 0.29 to 0.5
mm
Front paper
feeder
✓
*2
30×30 cm (12×12 in.), JIS B4,
Half Letter, Legal
-
Non-standard sizes
Width: 89 to 329 mm
Length: 127 to 1200 mm
✓
*2
279×356 mm (11×14 in.), A3+,
A3, 254×305 mm (10×12 in.),
28×43 cm (11×17 in.), Letter,
A4
1 0.51 to 0.7
mm
Rear paper
feeder
✓
*2
30×30 cm (12×12 in.), JIS B4,
Half Letter, Legal
-
Non-standard sizes
Width: 89 to 329 mm
Length: 127 to 1200 mm
✓
*2
30×30 cm (12×12 in.),
279×356 mm (11×14 in.), A3+,
A3, 254×305 mm (10×12 in.),
JIS B4, 28×43 cm (11×17 in.),
Half Letter, Legal, Letter, A4
11.2 to 1.5
mm
Front paper
feeder
-
Non-standard sizes
Width: 89 to 329 mm
Length: 127 to 1200 mm
Premium surface
CD/DVD
12 cm 1 – Disk tray -
CD/DVD 12 cm 1 – Disk tray -
*1: The number of sheets that can be set varies depending on the paper thickness.
Product Information
>
Paper Information
>
Available Paper and Capacities
187
*2: You can specify and perform borderless printing; however, margins may appear or the print quality may decline due to the
paper expanding or contracting. See the manual supplied with the paper and adjust settings as appropriate.
Unavailable Paper Types
Do not use the following papers. Using these types of paper causes paper jams and smears on the printout.
❏Papers that are wavy
❏Papers that are torn or cut
❏Papers that are folded
❏Papers that are damp
❏Papers that are too thick or too thin
❏Papers that have stickers
❏Printing on anything except for inkjet paper, which is slow-drying, may cause print stains.
Printing to Paper Types Other than Genuine Paper
Adding paper information (print settings)
You need the optimum paper settings to make full use of the paper's capabilities. When printing on paper other
than genuine paper, add the paper information (media settings) to the printer and select the paper setting that best
suits the paper.
c
Important:
❏Use a computer that is connected to the Internet, and perform operations aer connecting your computer to the
printer.
❏Paper information is added to your computer and printer over the Internet from a dedicated Epson server.
1. Display the add paper information screen from Epson Print Layout or the printer driver.
❏Epson Print Layout
Select Media Type > Download Media.
Product Information
>
Paper Information
>
Printing to Paper Types Other than Genuine Paper
188
❏Windows
Select Epson Media Installer on the Utility tab.
You can also start it from a shortcut icon on the computer's desktop.
❏Mac OS
Start Epson Media Installer as shown below.
Applications > Epson Soware > Epson Utilities > Epson Media Installer.app
A list of paper information that can be added is displayed.
If the target paper information is not available, see the paper manufacturer's website and set the paper.
Product Information
>
Paper Information
>
Printing to Paper Types Other than Genuine Paper
189
2. Add the paper information.
Select the target paper and click Download and Register.
You can select the added paper information from Epson Print Layout, printer drivers, and the paper setting
menus on the printer's control panel.
3. Select the target paper in the paper type setting in Epson Print Layout or the printer driver, and then print.
If you have added paper information, you can use the added paper's ICC prole in Epson Print Layout, printer
drivers, and other applications.
Product Information
>
Paper Information
>
Printing to Paper Types Other than Genuine Paper
190
Editing paper information
You can edit the paper information and print using your favorite settings.
1. Start Epson Media Installer, and select Media Management. Select the paper settings (media settings) that you
want to edit, and then select .
2. Select the paper information that you copied, and then select .
Note:
e edits are only performed on the copied paper information (media settings). You cannot edit the original paper
information directly. You can copy paper information for paper with the status Registered.
Product Information
>
Paper Information
>
Printing to Paper Types Other than Genuine Paper
191
3. Specify each setting on the editing screen, and then select OK.
Items Setting Explanation
Media Setting Name Specify a name for the media settings.
Media Type Set the category name for the paper. This is displayed to the paper type display in
the printer driver or on the printer's control panel.
Platen Gap Specify the interval (platen gap) of the print head and the paper. If the paper is
smeared, increase the value. If running Print Head Alignment on the printer does
not improve graininess or blurring in the print outs, decrease the value.
Drying Time per Pass Specify the length of time to stop the print head after each pass to help the ink dry.
Depending on the paper, the ink may not dry easily. Specify a longer drying time
when ink dripping or bleeding occurs in the print outs. Note that setting a longer
drying time will increase the overall print time.
Paper Thickness Specify the paper thickness.
Paper Size Check We recommend selecting this setting. Clear this checkbox if a paper error is
displayed even if you have loaded the paper correctly. Note that if you clear this
checkbox, printing may be performed beyond the edges of the paper and the
inside of the printer may be stained with ink.
Paper Feed Oset Specify this setting when banding (horizontal band-like patterns or uneven colors)
cannot be resolved even after checking and cleaning the print head or performing
Print Head Alignment on the printer. If the speed of the paper feed is too slow,
dark banding will occur. In this situation, adjust the paper feed in the positive (+)
direction. If the paper feed is too fast, white banding will occur. In this situation,
adjust the paper feed in the negative (-) direction..
Paper Feed Oset(Bottom) Specify the value for paper feed oset for the printing area up to approximately 39
mm from the end of cut paper.
ICC Prole Allows you to specify the ICC prole for other paper types.
4. Select the edited paper from paper type in Epson Print Layout or the printer driver, and then print.
Product Information
>
Paper Information
>
Printing to Paper Types Other than Genuine Paper
192
Consumable Products Information
Ink Cartridge Codes for SC-P900 Series
e following are the codes for genuine Epson ink cartridges.
For Europe, Australia and New Zealand
Ink color Product number
PK (Photo Black) T47A1
C (Cyan) T47A2
VM(Vivid Magenta) T47A3
Y (Yellow) T47A4
LC (Light Cyan) T47A5
VLM(Vivid Light Magenta) T47A6
GY(Gray) T47A7
MK(Matte Black) T47A8
LGY(Light Gray) T47A9
V(Violet) T47AD
For Hong Kong and Mongolia
Ink color Product number
PK (Photo Black) T47C1
C (Cyan) T47C2
VM(Vivid Magenta) T47C3
Y (Yellow) T47C4
LC (Light Cyan) T47C5
VLM(Vivid Light Magenta) T47C6
GY(Gray) T47C7
MK(Matte Black) T47C8
LGY(Light Gray) T47C9
V(Violet) T47CD
For Asian Countries except Hong Kong and Mongolia
Product Information
>
Consumable Products Information
>
Ink Cartridge Codes for SC-P900 Series
193
Ink color Product number
PK (Photo Black) T47E1
C (Cyan) T47E2
VM(Vivid Magenta) T47E3
Y (Yellow) T47E4
LC (Light Cyan) T47E5
VLM(Vivid Light Magenta) T47E6
GY(Gray) T47E7
MK(Matte Black) T47E8
LGY(Light Gray) T47E9
V(Violet) T47ED
Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of
non-genuine ink. e use of non-genuine ink may cause damage that is not covered by Epson’s warranties, and
under certain circumstances, may cause erratic printer behavior. Information about non-genuine ink levels may
not be displayed.
Note:
❏Ink cartridge codes may vary by location. For the correct codes in your area,contact Epson support.
❏Not all cartridges are available in all regions.
❏For users in Europe, visit the following website for information on Epson's ink cartridge yields.
http://www.epson.eu/pageyield
❏Although the ink cartridges may contain recycled materials, this does not aect printer function or performance.
❏Specications and appearance of the ink cartridge are subject to change without prior notice for improvement.
Ink Cartridge Codes for SC-P700 Series
e following are the codes for genuine Epson ink cartridges.
For Europe, Australia and New Zealand
Ink color Product number
PK (Photo Black) T46S1
C (Cyan) T46S2
VM(Vivid Magenta) T46S3
Y (Yellow) T46S4
LC (Light Cyan) T46S5
VLM(Vivid Light Magenta) T46S6
GY(Gray) T46S7
Product Information
>
Consumable Products Information
>
Ink Cartridge Codes for SC-P700 Series
194
Ink color Product number
MK(Matte Black) T46S8
LGY(Light Gray) T46S9
V(Violet) T46SD
For Hong Kong
Ink color Product number
PK (Photo Black) T46V1
C (Cyan) T46V2
VM(Vivid Magenta) T46V3
Y (Yellow) T46V4
LC (Light Cyan) T46V5
VLM(Vivid Light Magenta) T46V6
GY(Gray) T46V7
MK(Matte Black) T46V8
LGY(Light Gray) T46V9
V(Violet) T46VD
For Asian Countries except Hong Kong
Ink color Product number
PK (Photo Black) T46X1
C (Cyan) T46X2
VM(Vivid Magenta) T46X3
Y (Yellow) T46X4
LC (Light Cyan) T46X5
VLM(Vivid Light Magenta) T46X6
GY(Gray) T46X7
MK(Matte Black) T46X8
LGY(Light Gray) T46X9
V(Violet) T46XD
Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of
non-genuine ink. e use of non-genuine ink may cause damage that is not covered by Epson’s warranties, and
under certain circumstances, may cause erratic printer behavior. Information about non-genuine ink levels may
not be displayed.
Product Information
>
Consumable Products Information
>
Ink Cartridge Codes for SC-P700 Series
195
Note:
❏Ink cartridge codes may vary by location. For the correct codes in your area,contact Epson support.
❏Not all cartridges are available in all regions.
❏For users in Europe, visit the following website for information on Epson's ink cartridge yields.
http://www.epson.eu/pageyield
❏Although the ink cartridges may contain recycled materials, this does not aect printer function or performance.
❏Specications and appearance of the ink cartridge are subject to change without prior notice for improvement.
Maintenance Box Code
e maintenance box can be purchased and replaced by the user. Epson recommends the use of a genuine Epson
maintenance box.
e following is the code for the genuine Epson maintenance box.
C9357
c
Important:
Once a maintenance box has been installed in a printer it cannot be used with other printers.
Software Information
is section introduces the network services and soware products available for your printer from the Epson
website.
Software for Printing
Application for Printing from a Computer (Windows Printer Driver)
e printer driver controls the printer according to the commands from an application. Making settings on the
printer driver provides the best printing results. You can also check the status of the printer or keep it in top
operating condition using the printer driver utility.
You can change the language of the printer driver. Select the language you want to use from the Language setting
on the Utility tab.
Accessing the printer driver from applications
To make settings that apply only to the application you are using, access from that application.
Select Print or Print Setup from the File menu. Select your printer, and then click Preferences or Properties.
Note:
Operations dier depending on the application. See the application's help for details.
Accessing the printer driver from the control panel
To make settings that apply to all of the applications, access from the control panel.
Product Information
>
Software Information
>
Software for Printing
196
❏Windows 10
Click on the start button, and then select Windows System > Control Panel > View devices and printers in
Hardware and Sound. Right-click on your printer, or press and hold it and then select Printing preferences
❏Windows 8.1/Windows 8
Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound. Right-click
on your printer, or press and hold it and then select Printing preferences
❏Windows 7
Click the start button, and select Control Panel > View devices and printers in Hardware and Sound. Right-
click on your printer and select Printing preferences.
Accessing the printer driver from the printer icon on the task bar
e printer icon on the desktop task bar is a shortcut icon allowing you to quickly access the printer driver.
If you click the printer icon and select Printer Settings, you can access the same printer settings window as the one
displayed from the control panel. If you double-click this icon, you can check the status of the printer.
Note:
If the printer icon is not displayed on the task bar, access the printer driver window, click Monitoring Preferences on the
Utility tab, and then select Register the shortcut icon to the taskbar.
Starting the utility
Access the printer driver window. Click the Utility tab.
Related Information
&“Menu Options for the Printer Driver” on page 69
Making Operation Settings for the Windows Printer Driver
You can make settings such as enabling EPSON Status Monitor 3.
1. Access the printer driver window.
2. Click Speed and Progress on the Utility tab.
3. Make the appropriate settings, and then click OK.
See the online help for explanations of the setting items.
Application for Printing from a Computer (Mac OS Printer Driver)
e printer driver controls the printer according to the commands from an application. Making settings on the
printer driver provides the best printing results. You can also check the status of the printer or keep it in top
operating condition using the printer driver utility.
Accessing the printer driver from applications
Click Page Setup or Print on the File menu of your application. If necessary, click Show Details (or
d
) to expand
the print window.
Product Information
>
Software Information
>
Software for Printing
197
Note:
Depending on the application being used, Page Setup may not be displayed in the File menu, and the operations for
displaying the print screen may dier.See the application's help for details.
Starting the utility
Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
select the printer. Click Options & Supplies > Utility > Open Printer Utility.
Related Information
&“Menu Options for the Printer Driver” on page 89
Guide to Mac OS Printer Driver
Epson Printer Utility
You can run a maintenance feature such as nozzle check and print head cleaning, and by starting EPSON Status
Monitor, you can check printer status and error information.
Application for Printing to Easily Layout and Print Photos (Epson Print
Layout)
Epson Print Layout is an application that allows you to print retouched and processed photos using a simple
procedure. It can also be used as plug-in soware for Adobe Photoshop, Adobe Lightroom, Nikon ViewNX-i, and
SILKYPIX. For details on supported applications and supported data formats, see the manual that supplied with
Epson Print Layout.
You can download Epson Print Layout from the Epson website.
http://www.epson.com
Product Information
>
Software Information
>
Software for Printing
198
Note:
❏To use this application the printer driver for this printer must be installed.
❏See to the soware manual for details on how to start from commercially available application soware such as Adobe
Photoshop and Adobe Lightroom.
❏You can use Epson Print Layout on iPad. is allows you to move your project to other locations.
❏Search for and install Epson Print Layout from the App Store.
Related Information
&“Installing the Applications Separately” on page 106
Application for Quick and Fun Printing from a Computer (Epson Photo+)
Epson Photo+ is an application that allows you to easily print images with a variety of layouts. You can also
perform image correction and adjust the position while viewing a preview of your document. You can also
brighten up your images by adding text and stamps wherever you like. You can also print a CD/DVD jacket for
CD/DVD case. When printing on genuine Epson photo paper, the ink performance is maximized creating a
beautiful nish with excellent coloring.
See the application's help for details. You can download Epson Photo+ from the Epson website.
http://www.epson.com
Note:
To use this application the printer driver for this printer must be installed.
Starting on Windows
❏Windows 10
Click the start button, and then select Epson Soware > Epson Photo+.
❏Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
❏Windows 7
Click the start button, and select All Programs or Programs > Epson Soware > Epson Photo+.
Starting on Mac OS
Select Go > Applications > Epson Soware > Epson Photo+.
Related Information
&“Installing the Applications Separately” on page 106
Application for Easily Operating the Printer from a Smart device (Epson Smart
Panel)
Epson Smart Panel is an application that allows you to perform printer operations easily including printing from a
smart device such as a smartphone or tablet. You can connect the printer and smart device over a wireless network,
check the ink levels and printer status, and check for solutions if an error occurs.
Product Information
>
Software Information
>
Software for Printing
199
Search for and install Epson Smart Panel from App Store or Google Play.
Guide to the Epson Smart Panel Screen
Start Epson Smart Panel from your smart device and select the item you want to use from the home screen.
e following screens are subject to change without notice. e contents may vary depending on the product.
A displays notices and how to use the application. starts registering a printer.
BDisplays the printer name and ink levels.
CWhen you select the menu you want to use, the screen of the menu is displayed.
D displays the printer information. allows you to make application settings such as changing the screen
display.
Product Information
>
Software Information
>
Software for Printing
200
Software for Making Settings or Managing Devices
Application for Conguring Printer Operations (Web Cong)
Web Cong is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or
smart device. You can conrm the printer status or change the network service and printer settings. To use the
Web Cong, connect the printer and the computer or device to the same network.
e following browsers are supported.
Microso Edge, Internet Explorer 8 or later, Firefox
*
, Chrome
*
, Safari
*
*Use the latest version.
Running Web Cong on a Web Browser
1. Check the printer's IP address.
Select the network icon on the printer's home screen, and then select the active connection method to conrm
the printer's IP address.
Note:
You can also check the IP address by printing the network connection report.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Since the printer uses a self-signed certicate when accessing HTTPS, a warning is displayed on the browser
when you start Web Cong; this does not indicate a problem and can be safely ignored.
Related Information
&“Printing a Network Connection Report” on page 172
Running Web Cong on Windows
When connecting a computer to the printer using WSD, follow the steps below to run Web Cong.
1. Open the printer list on the computer.
❏Windows 10
Click on the start button, and then select Windows System > Control Panel > View devices and printers
in Hardware and Sound.
❏Windows 8.1/Windows 8
Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound (or
Hardware).
Product Information
>
Software Information
>
Software for Making Settings or Managing Devices
201
❏Windows 7
Click the start button, and select Control Panel > View devices and printers in Hardware and Sound.
2. Right-click on your printer and select Properties.
3. Select the Web Ser vice tab and click the URL.
Since the printer uses a self-signed certicate when accessing HTTPS, a warning is displayed on the browser
when you start Web Cong; this does not indicate a problem and can be safely ignored.
Running Web Cong on Mac OS
1. Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer.
2. Click Options & Supplies> Show Printer Webpage.
Since the printer uses a self-signed certicate when accessing HTTPS, a warning is displayed on the browser
when you start Web Cong; this does not indicate a problem and can be safely ignored.
Software for Updating
Application for Updating Software and Firmware (EPSON Software Updater)
EPSON Soware Updater is an application that installs new soware, and updates rmware and manuals over the
Internet. If you want to check for update information regularly, you can set the interval for checking for updates in
EPSON Soware Updater's Auto Update Settings.
Starting on Windows
❏Windows 10
Click the start button, and then select Epson Soware > EPSON Soware Updater.
❏Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
❏Windows 7
Click the start button, and then select All Programs (or Programs) > Epson Soware > EPSON Soware
Updater.
Note:
You can also start EPSON Soware Updater by clicking the printer icon on the task bar on the desktop, and then selecting
Soware Update.
Starting on Mac OS
Select Go > Applications > Epson Soware > EPSON Soware Updater.
Related Information
&“Installing the Applications Separately” on page 106
Product Information
>
Software Information
>
Software for Updating
202
Settings Menu List
Select > General Settings on the home screen of the printer to make various settings.
Screen Customization
Select the menus on the control panel as described below.
> General Settings > Screen Customization
Background Color:
Change the background color of the LCD screen.
Home Screen:
Set the default screen you want to display as the home screen.
Standard:
Displays information such as paper settings, ejection status, and ink info.
Supply Status:
Displays the approximate ink levels and the approximate service life of the maintenance box.
Print Screen:
Set the default screen you want to display when printing.
Photo:
Diplays thumbnails of images when you print using printer driver and Epson Print Layout.
Print Settings:
Displays print settings for the printer driver and Epson Print Layout.
Print Status:
Displays the approximate ink levels and a progress bar when printing.
Printer Settings
Select the menus on the control panel as described below.
> General Settings > Printer Settings
Paper Setup Auto Display:
Select On to display the Paper Setting screen when loading paper in the rear paper feeder. If you
disable this feature, you cannot print from an iPhone, iPad, or iPod touch using AirPrint.
Product Information
>
Settings Menu List
>
Printer Settings
203
Error Notice:
Paper Mismatch:
Displays a warning if the paper settings (print settings) for the print job do not match the
printer's paper settings made when you loaded the paper. is setting prevents misprinting.
However, the paper setting screen is not displayed when Paper Setup Auto Display is disables
in the following menus. If you disable this feature, you cannot print from an iPhone, iPad, or
iPod touch using AirPrint.
Detect Paper Meandering:
Select On to display a message when paper is fed at an angle.
Horizontal Centered:
Select On to print the image in the center of the paper.
Thick Paper:
Select On to prevent ink from smearing on your printouts.
Basic Settings
Select the menus on the control panel as described below.
> General Settings > Basic Settings
Inside Light:
Select Auto to turn on the interior light automatically when printing.
LCD Brightness:
Adjust the brightness of the LCD screen.
Sounds:
Adjust the volume and select the type of the sound.
❏Mute
❏Button Press
❏Error Tone
❏Sound Type
Sleep Timer:
Adjust the time period to enter a sleep mode (energy saving mode) when the printer has not
performed any operations. e LCD screen turns black when the setting time passes.
Power O Settings:
Your product may have this feature or the Power O Timer feature depending on the location of
purchase.
Product Information
>
Settings Menu List
>
Basic Settings
204
❏Power O If Inactive
Select this setting to turn the printer o automatically if it is not used for a specied period of
time. Any increase will aect the product’s energy eciency. Please consider the environment
before making any change.
❏Power O If Disconnected
Select this setting to turn the printer o aer 30 minutes when all ports including the USB port are
disconnected. is feature may not be available depending on your region.
Power O Timer:
Your product may have this feature or the Power O Settings feature depending on the location of
purchase.
Select this setting to turn the printer o automatically when it is not used for a specied period of
time. You can adjust the time before power management is applied. Any increase will aect the
product’s energy eciency. Please consider the environment before making any change.
Date/Time Settings:
❏Date/Time
Enter the current date and time.
❏Daylight Saving Time
Select the summer time setting that applies to your area.
❏Time Dierence
Enter the time dierence between your local time and UTC (Coordinated Universal Time).
Language:
Select the language used on the LCD screen.
Length Unit:
Select the length unit.
Related Information
&“Saving Power” on page 106
Network Settings
Select the menus on the control panel as described below.
> General Settings > Network Settings
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from following and then
follow the instructions on the control panel.
Wi-Fi (Recommended):
❏Wi-Fi Setup Wizard
❏Push Button Setup(WPS)
Product Information
>
Settings Menu List
>
Network Settings
205
❏Others
❏PIN Code Setup(WPS)
❏Wi-Fi Auto Connect
❏Disable Wi-Fi
You may be able to resolve network problems by disabling the Wi-Fi settings or making
the Wi-Fi settings again. Tap > Wi-Fi (Recommended) > Change Settings >
Others > Disable Wi-Fi > Start Setup.
Wi-Fi Direct:
❏iOS
❏Android
❏Other OS Devices
❏Change
❏Change Network Name
❏Change Password
❏Disable Wi-Fi Direct
❏Restore Default Settings
Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used,
Wi-Fi connections are disabled.
Network Status:
Displays or prints the current network settings.
❏Wired LAN/Wi-Fi Status
❏Wi-Fi Direct Status
❏Print Status Sheet
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Make the following detailed settings.
❏Device Name
❏TCP/IP
❏Proxy Server
Web Service Settings
Select the menus on the control panel as described below.
Product Information
>
Settings Menu List
>
Web Service Settings
206
> General Settings > Web Service Settings
Epson Connect Services:
Displays whether the printer is registered and connected to Epson Connect. You can register to the
service by selecting Register and follow the instructions. When you have registered, you can change the
following settings.
❏Suspend/Resume
❏Unregister
For details, see the following web site.
https://www.epsonconnect.com/
http://www.epsonconnect.eu (Europe only)
Customer Research
Select the menus on the control panel as described below.
> General Settings > Customer Research
Select Approve to provide product usage information such as the number of prints to Seiko Epson Corporation.
Restore Default Settings
Select the menus on the control panel as described below.
> General Settings > Restore Default Settings
Reset the settings in the following menus to their defaults.
❏Network Settings
❏All Except Network Settings
❏Clear All Data and Settings
Printer Status/Print
Select the menus on the control panel as described below.
> General Settings > Printer Status/Print
Print Status Sheet:
Conguration Status Sheet:
Print information sheets showing the current printer status and settings.
Supply Status Sheet:
Print information sheets showing the status of consumables.
Product Information
>
Settings Menu List
>
Printer Status/Print
207
Usage History Sheet:
Print information sheets showing the usage history of the printer.
Network:
Displays the current network settings. You can also print the status sheet.
Problem Checklist:
Print sheets to check for printer problems. If the printer malfunctions, print the "customer diagnosis
sheets (3 sheets)" and ll in the required information on the rst and second sheets. Including the
third nozzle check result with the rst two sheets can make repairs smoother.
Firmware Version:
Displays the current rmware version of your printer.
Firmware Update
Select the menus on the control panel as described below.
> General Settings > Firmware Update
Update:
Check if the latest version of the rmware has been uploaded to the network server. e rmware is
updated when new rmware is found. Once the update has started, it cannot be interrupted.
Notication:
Select On to receive a notication if a rmware update is available.
Related Information
&“Updating the Printer's Firmware Using the Control Panel” on page 111
Product Specications
Printer Specications
Type Printer Inkjet
Print Head Nozzle Placement Black ink nozzles: 360
Color ink nozzles: 180 for each color
Product Information
>
Product Specications
>
Printer Specications
208
Printable Area
Printable Area for Single Sheets
Print quality may decline in the shaded areas due to the printer's mechanism.
Printing with borders
A
*
3 mm
B3 mm
C33 mm
D36 mm
*: Poster board is printed with 20.0 mm margins.
Borderless printing
*
A36 mm
B39 mm
C3 mm
*: Borderless printing is not supported with poster board.
Printable Area for Roll Paper
Print quality may decline in the shaded areas due to the printer's mechanism.
Product Information
>
Product Specications
>
Printer Specications
209
Printing with borders
A50mm
B3mm
C
*
14mm
D
*
50mm
*: 0 mm for continuous print jobs.
Borderless printing
A50mm
B
*
14mm
C
*
50mm
*: 0 mm for continuous print jobs.
Printable Area for CD/DVD
Print quality may decline in the shaded areas due to the printer's mechanism.
A 18 mm (0.71 in.)
B 43 mm (1.69 in.)
C 116 mm (4.57 in.)
D 120 mm (4.72 in.)
Product Information
>
Product Specications
>
Printer Specications
210
Interface Specications
For Computer SuperSpeed USB
Network Specications
Wi-Fi Specications
See the following table for Wi-Fi specications.
Countries or regions except for those listed below Table A
Ireland, UK, Austria, Germany, Liechtenstein, Switzerland,
France, Belgium, Luxemburg, Netherlands, Italy, Portugal,
Spain, Denmark, Finland, Norway, Sweden, Iceland, Australia,
New Zealand, China, Hong Kong, Mongolia, Taiwan, South
Korea
Table B
Guade Loupe, Martinique, Mayotte, New Caledonia,
SaintPierre,Miquelon, Reunion, French Polynesia, French
Guyana, Wallis Futuna
If you can select the following menu, see Table B. If you
cannot, see Table A.
>General Settings > Network Settings > Wi-Fi Setup
> Wi-Fi Direct > Start Setup > Change > Change
Frequency Range
*When you select the menu above, Wi-Fi Direct turns on.
If you want to turn o Wi-Fi Direct, select >General
Settings > Network Settings > Wi-Fi Setup > Wi-Fi Direct
> Start Setup > Change > Disable Wi-Fi Direct
Table A
Standards IEEE802.11b/g/n
*1
Frequency Range 2.4 GHz
Channels 1/2/3/4/5/6/7/8/9/10/11/12/13
Coordination Modes Infrastructure, Wi-Fi Direct (Simple AP)
*2*3
Security Protocols
*4
WEP (64/128bit), WPA2-PSK (AES)
*5
, WPA3-SAE (AES)
*1: Only available for the HT20
*2: Not supported for IEEE 802.11b
*3: Infrastructure and Wi-Fi Direct modes or an Ethernet connection can be used simultaneously.
*4: Wi-Fi Direct supports WPA2-PSK (AES) only.
*5: Complies with WPA2 standards with support for WPA/WPA2 Personal.
Product Information
>
Product Specications
>
Network Specications
211
Table B
Standards IEEE802.11a/b/g/n
*1
/ac
Frequency Ranges IEEE802.11b/g/n: 2.4 GHz, IEEE802.11a/n/ac: 5 GHz
Channels Wi-Fi 2.4 GHz 1/2/3/4/5/6/7/8/9/10/11/12
*2
/13
*2
5 GHz
*3
W52 (36/40/44/48),
W53 (52/56/60/64),
W56 (100/104/108/112/116/120/124/128/132/136/140),
W58 (149/153/157/161/165)
Wi-Fi Direct 2.4 GHz 1/2/3/4/5/6/7/8/9/10/11/12
*2
/13
*2
5 GHz
*3
W52 (36/40/44/48)
W58 (149/153/157/161/165)
Connection Modes Infrastructure, Wi-Fi Direct (Simple AP)
*4*5
Security Protocols
*6
WEP (64/128bit), WPA2-PSK (AES)
*7
, WPA3-SAE (AES)
*1: Only available for the HT20
*2: Not available in Taiwan
*3: The availability of these channels and use of the product outdoors over these channels varies by location. For more
information, see http://support.epson.net/wi5ghz/
*4: Not supported for IEEE 802.11b
*5: Infrastructure and Wi-Fi Direct modes or an Ethernet connection can be used simultaneously.
*6: Wi-Fi Direct only supports WPA2-PSK (AES) .
*7: Complies with WPA2 standards with support for WPA/WPA2 Personal.
Ethernet Specications
Standards IEEE802.3i (10BASE-T)
*1
IEEE802.3u (100BASE-TX)
*1
IEEE802.3az (Energy Ecient Ethernet)
*2
Communication Mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps
Full duplex, 100Mbps Half duplex
Connector RJ-45
*1 Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
*2 The connected device should comply with IEEE802.3az standards.
Product Information
>
Product Specications
>
Network Specications
212
Network Functions and IPv4/IPv6
Functions Supported Remarks
Network Printing EpsonNet Print (Windows) IPv4 ✓-
Standard TCP/IP (Windows) IPv4, IPv6 ✓-
WSD Printing (Windows) IPv4, IPv6 ✓Windows Vista or
later
Bonjour Printing (Mac OS) IPv4, IPv6 ✓-
IPP Printing (Windows, Mac
OS)
IPv4, IPv6 ✓-
PictBridge Printing (Wi-Fi) IPv4 ✓Digital camera
Epson Connect (Email Print,
Remote Print)
IPv4 ✓-
AirPrint (iOS, Mac OS) IPv4, IPv6 ✓iOS 5 or later, Mac
OS X v10.7 or later
Network Scanning Epson Scan 2 IPv4, IPv6 - -
Event Manager IPv4 - -
Epson Connect (Scan to
Cloud)
IPv4 - -
AirPrint (Scan) IPv4, IPv6 - -
Fax Send a fax IPv4 - -
Receive a fax IPv4 - -
AirPrint (Faxout) IPv4, IPv6 - -
Security Protocol
SSL/TLS HTTPS Server/Client, IPPS
SNMPv3
Supported Third Party Services
AirPrint iOS 5 or later/Mac OS X v10.7.x or later
Product Information
>
Product Specications
>
Supported Third Party Services
213
Dimensions
SC-P900 Series
Dimensions Storage
❏Width: 615 mm (24.2 in.)
❏Depth: 368 mm (14.5 in.)
❏Height: 199 mm (7.8 in.)
Printing
❏Width: 615 mm (24.2 in.)
❏Depth: 905 mm (35.6 in.)
❏Height: 520 mm (20.5 in.)
Weight Approx. 14.8 kg (32.6 lb) (Without the ink cartridges and the power cord.)
Approx. 15.9 kg (35.1 lb) (With the ink cartridges and the power cord.)
SC-P700 Series
Dimensions Storage
❏Width: 515 mm (20.3 in.)
❏Depth: 368 mm (14.5 in.)
❏Height: 185 mm (7.3 in.)
Printing
❏Width: 515 mm (20.3 in.)
❏Depth: 769 mm (30.3 in.)
❏Height: 420 mm (16.5 in.)
Weight Approx. 12.6 kg (27.8 lb) (Without the ink cartridges and the power cord.)
Approx. 13.7 kg (30.2 lb) (With the ink cartridges and the power cord.)
Electrical Specications
SC-P900 Series
Model 100 to 240 V Model 100 to 120V Model 220 to 240 V Model
Rated Frequency Range 50 to 60 Hz 50 to 60 Hz 50 to 60 Hz
Rated Current 1.3 to 0.7 A 1.2 A 0.7 A
Power Consumption
(with USB Connection)
Printing: Approx. 24.0 W
(ISO/IEC24712)
Ready mode: Approx. 8.0 W
Sleep mode: Approx. 1.1 W
Power o: Approx. 0.14 W
Printing: Approx. 24.0 W
(ISO/IEC24712)
Ready mode: Approx. 8.0 W
Sleep mode: Approx. 1.1 W
Power o: Approx. 0.08 W
Printing: Approx. 24.0 W (ISO/
IEC24712)
Ready mode: Approx. 8.0 W
Sleep mode: Approx. 1.1 W
Power o: Approx. 0.18 W
Product Information
>
Product Specications
>
Electrical Specications
214
Note:
❏Check the label on the printer for its voltage.
❏For European users, see the following Website for details on power consumption.
http://www.epson.eu/energy-consumption
SC-P700 Series
Model 100 to 240 V Model 100 to 120V Model 220 to 240 V Model
Rated Frequency Range 50 to 60 Hz 50 to 60 Hz 50 to 60 Hz
Rated Current 1.3 to 0.7 A 1.2 A 0.7 A
Power Consumption
(with USB Connection)
Printing: Approx. 22.0 W
(ISO/IEC24712)
Ready mode: Approx. 8.0 W
Sleep mode: Approx. 1.1 W
Power o: Approx. 0.14 W
Printing: Approx. 22.0 W
(ISO/IEC24712)
Ready mode: Approx. 8.0 W
Sleep mode: Approx. 1.1 W
Power o: Approx. 0.08 W
Printing: Approx. 22.0 W (ISO/
IEC24712)
Ready mode: Approx. 8.0 W
Sleep mode: Approx. 1.1 W
Power o: Approx. 0.18 W
Note:
❏Check the label on the printer for its voltage.
❏For European users, see the following Website for details on power consumption.
http://www.epson.eu/energy-consumption
Environmental Specications
Operation Use the printer within the range shown in the following graph.
Temperature: 10 to 35°C (50 to 95°F)
Humidity: 20 to 80% RH (without condensation)
Storage Temperature: -20 to 40°C (-4 to 104°F)
*
Humidity: 5 to 85% RH (without condensation)
* You can store for one month at 40°C (104°F).
Environmental Specications for Ink Cartridges
Storage Temperature -20 to 40 °C (-4 to 104 °F)
*
Product Information
>
Product Specications
>
Environmental Specications
215
Freezing Temperature 0 °C (32 °F)
Ink thaws and is usable after approximately 3 hours at 25 °C (77 °F).
* You can store for one month at 40 °C (104 °F).
Installation Location and Space
Secure enough place to install and operate the printer correctly.
A
C
D
BF
E
Product Name SC-P900 Series SC-P700 Series
A 576 mm 507 mm
B173 mm
*1
143 mm
*2
C 110 mm 108 mm
D 964 mm 858 mm
E 825 mm 723 mm
F 100 mm 100 mm
*1: When you load paper in the front paper feeder, secure more than 405 mm, and when you set the optional roll
paper unit and load roll paper, secure more than 332 mm behind the printer.
*2: When you load paper in the front paper feeder, secure more than 330 mm, and when you load roll paper,
secure more than 164 mm behind the printer.
See "Safety Instructions" in this manual to conrm the environmental conditions.
Related Information
&“Safety Instructions” on page 11
Product Information
>
Product Specications
>
Installation Location and Space
216
System Requirements
❏Windows 10 (32-bit, 64-bit)/Windows 8.1 (32-bit, 64-bit)/Windows 8 (32-bit, 64-bit)/Windows 7 (32-bit, 64-
bit)
❏macOS Catalina(10.15)/macOS Mojave(10.14)/macOS High Sierra(10.13)/macOS Sierra(10.12)/OS X El
Capitan(10.11)/OS X Yosemite(10.10)/OS X Mavericks(10.9)
Note:
❏Mac OS may not support some applications and features.
❏e UNIX File System (UFS) for Mac OS is not supported.
Regulatory Information
Standards and Approvals
Standards and Approvals for U.S. Model
Safety UL62368-1
CAN/CSA-C22.2 No.62368-1
EMC FCC Part 15 Subpart B Class B
CAN ICES-3 (B)/NMB-3 (B)
is equipment contains the following wireless module.
Manufacturer: Seiko Epson Corporation
Type: J26H005
is product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson cannot accept
responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modication of the product. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject
to licensing.
is equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. is equipment should be installed and operated so that the radiator is kept at least
7.9 inches (20 cm) or more away from a person's body (excluding extremities: hands, wrists, feet and ankles).
Standards and Approvals for European Model
For European users
Hereby, Seiko Epson Corporation declares that the following radio equipment model is in compliance with
Directive 2014/53/EU. e full text of the EU declaration of conformity is available at the following website.
Product Information
>
Regulatory Information
>
Standards and Approvals
217
http://www.epson.eu/conformity
K371A
For use only in Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg,
Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Croatia, Cyprus, Greece,
Slovenia, Malta, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, and Slovakia.
Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-
recommended modication of the products.
Frequency Maximum Radio-Frequency Power Transmitted
2400-2483.5 MHz 20 dBm (EIRP)
5150-5250 MHz 20 dBm (EIRP)
5250-5350 MHz 20 dBm (EIRP)
5470-5725 MHz 20 dBm (EIRP)
Standards and Approvals for Australian Model
EMC AS/NZS CISPR32 Class B
Epson hereby declares that the following equipment Models are in compliance with the essential requirements and
other relevant provisions of AS/NZS4268:
K371A
Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-
recommended modication of the products.
Restrictions on Copying
Observe the following restrictions to ensure the responsible and legal use of the printer.
Copying of the following items is prohibited by law:
❏Bank bills, coins, government-issued marketable securities, government bond securities, and municipal
securities
❏Unused postage stamps, pre-stamped postcards, and other ocial postal items bearing valid postage
❏Government-issued revenue stamps, and securities issued according to legal procedure
Exercise caution when copying the following items:
❏Private marketable securities (stock certicates, negotiable notes, checks, etc.), monthly passes, concession
tickets, etc.
❏Passports, driver’s licenses, warrants of tness, road passes, food stamps, tickets, etc.
Product Information
>
Regulatory Information
>
Restrictions on Copying
218
Note:
Copying these items may also be prohibited by law.
Responsible use of copyrighted materials:
Printers can be misused by improperly copying copyrighted materials. Unless acting on the advice of a
knowledgeable attorney, be responsible and respectful by obtaining the permission of the copyright holder before
copying published material.
Product Information
>
Regulatory Information
>
Restrictions on Copying
219
Technical Support Web Site
If you need further help, visit the Epson support website shown below. Select your country or region and go to the
support section of your local Epson website. e latest drivers, FAQs, manuals, or other downloadables are also
available from the site.
http://support.epson.net/
http://www.epson.eu/Support (Europe)
If your Epson product is not operating properly and you cannot solve the problem, contact Epson support services
for assistance.
Contacting Epson Support
Before Contacting Epson
If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting
information in your product manuals, contact Epson support services for assistance. If Epson support for your area
is not listed below, contact the dealer where you purchased your product.
Epson support will be able to help you much more quickly if you give them the following information:
❏Product serial number
(e serial number label is usually on the back of the product.)
❏Product model
❏Product soware version
(Click About, Version Info, or a similar button in the product soware.)
❏Brand and model of your computer
❏Your computer operating system name and version
❏Names and versions of the soware applications you normally use with your product
Note:
Depending on the product, network settings may be stored in the product’s memory. Due to breakdown or repair of a
product, settings may be lost. Epson shall not be responsible for the loss of any data, for backing up or recovering settings
even during a warranty period. We recommend that you make your own backup data or take notes.
Help for Users in Europe
Check your Pan-European Warranty Document for information on how to contact Epson support.
Help for Users in Taiwan
Contacts for information, support, and services are:
World Wide Web
http://www.epson.com.tw
Where to Get Help
>
Contacting Epson Support
>
Help for Users in Taiwan
221
Information on product specications, drivers for download, and products enquiry are available.
Epson HelpDesk
Phone: +886-2-80242008
Our HelpDesk team can help you with the following over the phone:
❏Sales enquiries and product information
❏Product usage questions or problems
❏Enquiries on repair service and warranty
Repair service center:
http://www.tekcare.com.tw/branchMap.page
TekCare corporation is an authorized service center for Epson Taiwan Technology & Trading Ltd.
Help for Users in Australia
Epson Australia wishes to provide you with a high level of customer service. In addition to your product manuals,
we provide the following sources for obtaining information:
Internet URL
http://www.epson.com.au
Access the Epson Australia World Wide Web pages. Worth taking your modem here for the occasional surf! e
site provides a download area for drivers, Epson contact points, new product information and technical support (e-
mail).
Epson Helpdesk
Phone: 1300-361-054
Epson Helpdesk is provided as a nal backup to make sure our clients have access to advice. Operators on the
Helpdesk can aid you in installing, conguring and operating your Epson product. Our Pre-sales Helpdesk sta
can provide literature on new Epson products and advise where the nearest dealer or service agent is located. Many
types of queries are answered here.
We encourage you to have all the relevant information on hand when you ring. e more information you prepare,
the faster we can help solve the problem. is information includes your Epson product manuals, type of
computer, operating system, application programs, and any information you feel is required.
Transportation of Product
Epson recommends retaining product packaging for future transportation.
Help for Users in New Zealand
Epson New Zealand wishes to provide you with a high level of customer service. In addition to your product
documentation, we provide the following sources for obtaining information:
Internet URL
http://www.epson.co.nz
Where to Get Help
>
Contacting Epson Support
>
Help for Users in New Zealand
222
Access the Epson New Zealand World Wide Web pages. Worth taking your modem here for the occasional surf!
e site provides a download area for drivers, Epson contact points, new product information and technical
support (e-mail).
Epson Helpdesk
Phone: 0800 237 766
Epson Helpdesk is provided as a nal backup to make sure our clients have access to advice. Operators on the
Helpdesk can aid you in installing, conguring and operating your Epson product. Our Pre-sales Helpdesk sta
can provide literature on new Epson products and advise where the nearest dealer or service agent is located. Many
types of queries are answered here.
We encourage you to have all the relevant information on hand when you ring. e more information you prepare,
the faster we can help solve the problem. is information includes your Epson product documentation, type of
computer, operating system, application programs, and any information you feel is required.
Transportation of Product
Epson recommends retaining product packaging for future transportation.
Help for Users in Singapore
Sources of information, support, and services available from Epson Singapore are:
World Wide Web
http://www.epson.com.sg
Information on product specications, drivers for download, Frequently Asked Questions (FAQ), Sales Enquiries,
and Technical Support via e-mail are available.
Epson HelpDesk
Toll Free: 800-120-5564
Our HelpDesk team can help you with the following over the phone:
❏Sales enquiries and product information
❏Product usage questions or problem troubleshooting
❏Enquiries on repair service and warranty
Help for Users in Thailand
Contacts for information, support, and services are:
World Wide Web
http://www.epson.co.th
Information on product specications, drivers for download, Frequently Asked Questions (FAQ), and e-mail are
available.
Epson Call Centre
Phone: 66-2685-9899
Where to Get Help
>
Contacting Epson Support
>
Help for Users in Thailand
223
Email: support@eth.epson.co.th
Our Call Centre team can help you with the following over the phone:
❏Sales enquiries and product information
❏Product usage questions or problems
❏Enquiries on repair service and warranty
Help for Users in Vietnam
Contacts for information, support, and services are:
Epson Service Center
65 Truong Dinh Street, District 1, Hochiminh City, Vietnam.
Phone(Ho Chi Minh City): 84-8-3823-9239, 84-8-3825-6234
29 Tue Tinh, Quan Hai Ba Trung, Hanoi City, Vietnam
Phone(Hanoi City): 84-4-3978-4785, 84-4-3978-4775
Help for Users in Indonesia
Contacts for information, support, and services are:
World Wide Web
http://www.epson.co.id
❏Information on product specications, drivers for download
❏Frequently Asked Questions (FAQ), Sales Enquiries, questions through e-mail
Epson Hotline
Phone: +62-1500-766
Fax: +62-21-808-66-799
Our Hotline team can help you with the following over the phone or fax:
❏Sales enquiries and product information
❏Techn ic al support
Epson Service Center
Province Company Name Address Phone
E-mail
DKI JAKARTA ESS JAKARTA
MANGGADUA
Ruko Mall Mangga Dua No. 48 Jl. Arteri
Mangga Dua, Jakarta Utara - DKI JAKARTA
(+6221) 62301104
jkt-admin@epson-indonesia.co.id
NORTH
SUMATERA
ESC MEDAN Jl. Bambu 2 Komplek Graha Niaga Nomor
A-4, Medan - North Sumatera
(+6261) 42066090 / 42066091
mdn-adm@epson-indonesia.co.id
Where to Get Help
>
Contacting Epson Support
>
Help for Users in Indonesia
224
Province Company Name Address Phone
E-mail
WEST JAWA ESC BANDUNG Jl. Cihampelas No. 48 A Bandung Jawa
Barat 40116
(+6222) 4207033
bdg-admin@epson-
indonesia.co.id
DI
YOGYAKARTA
ESC YOGYAKARTA YAP Square, Block A No. 6 Jl. C Simanjutak
Yogyakarta - DIY
(+62274) 581065
ygy-admin@epson-indonesia.co.id
EAST JAWA ESC SURABAYA Hitech Mall Lt. 2 Block A No. 24 Jl. Kusuma
Bangsa No. 116 - 118 Surabaya - JATIM
(+6231) 5355035
sby-admin@epson-indonesia.co.id
SOUTH
SULAWESI
ESC MAKASSAR Jl. Cendrawasih NO. 3A, kunjung mae,
mariso, MAKASSAR - SULSEL 90125
(+62411) 8911071
mksr-admin@epson-
indonesia.co.id
WEST
KALIMANTAN
ESC PONTIANAK Komp. A yani Sentra Bisnis G33, Jl. Ahmad
Yani - Pontianak Kalimantan Barat
(+62561) 735507 / 767049
pontianak-admin@epson-
indonesia.co.id
RIAU ESC PEKANBARU Jl. Tuanku Tambusai No.459A Pekanbaru
Riau
(+62761) 8524695
pkb-admin@epson-
indonesia.co.id
DKI JAKARTA ESS JAKARTA
SUDIRMAN
Wisma Keiai Lt. 1 Jl. Jenderal Sudirman Kav.
3 Jakarta Pusat - DKI JAKARTA 10220
(+6221) 5724335
ess@epson-indonesia.co.id
EAST JAWA ESS SURABAYA Ruko Surya Inti Jl. Jawa No 2-4 Kav. 29
Surabaya - Jawa Timur
(+6231) 5014949
esssby@epson-indonesia.co.id
BANTEN ESS SERPONG Ruko Mall WTC Matahari No. 953, Serpong-
Banten
(+6221) 53167051 / 53167052
esstag@epson-indonesia.co.id
CENTRAL
JAWA
ESS SEMARANG Komplek Ruko Metro Plaza Block C20 Jl. MT
Haryono No 970 Semarang - JAWA TENGAH
(+6224) 8313807 / 8417935
esssmg@epson-indonesia.co.id
EAST
KALIMANTAN
ESC SAMARINDA Jl. KH. Wahid Hasyim (M. Yamin) Kelurahan
Sempaja Selatan Kecamatan Samarinda
UTARA - SAMARINDA - KALTIM
(+62541) 7272904
escsmd@epson-indonesia.co.id
SOUTH
SUMATERA
ESC PALEMBANG Jl. H.M Rasyid Nawawi No. 249 Kelurahan 9
Ilir Palembang Sumatera Selatan
(+62711) 311330
escplg@epson-indonesia.co.id
EAST JAVA ESC JEMBER JL. Panglima Besar Sudirman Ruko no.1D
Jember-Jawa Timur (Depan Balai Penelitian
& Pengolahan Kakao)
(+62331) 488373 / 486468
jmr-admin@epson-indonesia.co.id
NORTH
SULAWESI
ESC MANADO Tekno Megamall Lt LG 11 TK 21, Kawasan
Megamas Boulevard, Jl Piere Tendean,
Manado - SULUT 95111
(+62431) 8890996
MND-ADMIN@EPSON-
INDONESIA.CO.ID
For other cities not listed here, call the Hot Line: 08071137766.
Where to Get Help
>
Contacting Epson Support
>
Help for Users in Indonesia
225
Help for Users in Hong Kong
To obtain technical support as well as other aer-sales services, users are welcome to contact Epson Hong Kong
Limited.
Internet Home Page
http://www.epson.com.hk
Epson Hong Kong has established a local home page in both Chinese and English on the Internet to provide users
with the following information:
❏Product information
❏Answers to Frequently Asked Questions (FAQs)
❏Latest versions of Epson product drivers
Technical Support Hotline
You can also contact our technical sta at the following telephone and fax numbers:
Phone: 852-2827-8911
Fax: 852-2827-4383
Help for Users in Malaysia
Contacts for information, support, and services are:
World Wide Web
http://www.epson.com.my
❏Information on product specications, drivers for download
❏Frequently Asked Questions (FAQ), Sales Enquiries, questions through e-mail
Epson Call Centre
Phone: +60 1800-8-17349
❏Sales enquiries and product information
❏Product usage questions or problems
❏Enquiries on repair services and warranty
Head Oce
Phone: 603-56288288
Fax: 603-5628 8388/603-5621 2088
Help for Users in India
Contacts for information, support, and services are:
Where to Get Help
>
Contacting Epson Support
>
Help for Users in India
226
World Wide Web
http://www.epson.co.in
Information on product specications, drivers for download, and products enquiry are available.
Helpline
❏Service, product information, and ordering consumables (BSNL Lines)
Toll-free number: 18004250011
Accessible 9am to 6pm, Monday through Saturday (Except public holidays)
❏Service (CDMA & Mobile Users)
Toll-free number: 186030001600
Accessible 9am to 6pm, Monday through Saturday (Except public holidays)
Help for Users in the Philippines
To obtain technical support as well as other aer sales services, users are welcome to contact the Epson Philippines
Corporation at the telephone, fax numbers and e-mail address below:
World Wide Web
http://www.epson.com.ph
Information on product specications, drivers for download, Frequently Asked Questions (FAQ), and E-mail
Enquiries are available.
Epson Philippines Customer Care
Toll Free: (PLDT) 1-800-1069-37766
Toll Free: (Digital) 1-800-3-0037766
Metro Manila: (+632)441-9030
Web Site: https://www.epson.com.ph/contact
E-mail: customercare@epc.epson.som.ph
Accessible 9am to 6pm, Monday through Saturday (Except public holidays)
Our Customer Care team can help you with the following over the phone:
❏Sales enquiries and product information
❏Product usage questions or problems
❏Enquiries on repair service and warranty
Epson Philippines Corporation
Trunk Line: +632-706-2609
Fax: +632-706-2663
Where to Get Help
>
Contacting Epson Support
>
Help for Users in the Philippines
227