Contents
Introduction to Your Projector
Setting Up the Projector
Using the Projector on a Network
Using Basic Projector Features
Adjusting Projector Features
Using the Interactive Features
Adjusting the Menu Settings
Maintaining and Transporting the Projector
Solving Problems
Technical Specifications
Notices

Epson V11H877022 User Manual

Displayed below is the user manual for V11H877022 by Epson which is a product in the Data Projectors category. This manual has pages.

Related Manuals

Epson Epson M-190: 57.5mm, 5V, Standard Ribbon Manual

Epson Epson SureColor SCF7000 Manual

Epson TM-U220A Manual

Epson TM-U295 Manual

Epson TM-U220PA Manual

Epson TM-U220PA-103 Manual

Epson TM-U295P Parallel White Manual

Epson TM-C100 Manual

BrightLink 710Ui User's Guide

Contents

BrightLink 710Ui User's Guide ................................................................................................................. 11

Introduction to Your Projector ................................................................................................................. 12

Projector Features.............................................................................................................................. 12

Product Box Contents.................................................................................................................... 13

Additional Components ................................................................................................................ 15

Optional Equipment and Replacement Parts................................................................................. 16

Warranty and Registration Information .......................................................................................... 17

Notations Used in the Documentation ................................................................................................ 17

Where to Go for Additional Information .............................................................................................. 18

Additional Projector Software and Manuals........................................................................................ 18

Projector Part Locations ..................................................................................................................... 20

Projector Parts - Front/Side ........................................................................................................... 21

Projector Parts - Top/Side ............................................................................................................. 22

Projector Parts - Back Panel.......................................................................................................... 24

Projector Parts - Base.................................................................................................................... 26

Projector Parts - Control Panel ...................................................................................................... 27

Projector Parts - Remote Control................................................................................................... 28

Projector Parts - Interactive Pens and Pen Tray............................................................................ 30

Projector Parts - Touch Unit .......................................................................................................... 32

Setting Up the Projector ........................................................................................................................... 34

Projector Placement........................................................................................................................... 34

Projector Setup and Installation Options ....................................................................................... 35

Projection Distance........................................................................................................................ 37

Removing and Attaching the Cable Cover.......................................................................................... 37

Projector Connections........................................................................................................................ 38

Connecting to Computer Sources.................................................................................................. 39

Connecting to a Computer for USB Video and Audio................................................................ 39

Connecting to a Computer for VGA Video and Audio................................................................ 40

Connecting to a Computer for HDMI Video and Audio.............................................................. 41

Connecting to a Computer for Sound........................................................................................ 42

Connecting to Video Sources ........................................................................................................ 43

Connecting to an HDMI Video Source ...................................................................................... 43

Connecting to an MHL-Compatible Device ............................................................................... 44

Connecting to a Component Video Source ............................................................................... 45

Connecting to a Composite Video Source ................................................................................ 46

Connecting to a Video Source for Sound .................................................................................. 47

Connecting External Output Devices............................................................................................. 48

Connecting to an External Computer Monitor ........................................................................... 48

Connecting to External Speakers.............................................................................................. 49

Connecting a Microphone ......................................................................................................... 50

Connecting to External USB Devices ............................................................................................ 51

USB Device Projection.............................................................................................................. 52

Connecting a USB Device or Camera to the Projector.............................................................. 52

Selecting the Connected USB Source ...................................................................................... 53

Disconnecting a USB Device or Camera From the Projector .................................................... 54

Connecting to a Document Camera .............................................................................................. 54

Connecting Multiple Projectors of the Same Model ....................................................................... 55

Installing Batteries in the Remote Control .......................................................................................... 56

Installing Batteries in the Pens ........................................................................................................... 58

Using the Projector on a Network ............................................................................................................ 60

Wired Network Projection................................................................................................................... 60

Connecting to a Wired Network ..................................................................................................... 60

Selecting Wired Network Settings ................................................................................................. 61

Wireless Network Projection .............................................................................................................. 64

Installing the Wireless LAN Module ............................................................................................... 65

Connecting Directly to a Smartphone or Tablet ............................................................................. 67

Using Quick Wireless Connection (Windows)................................................................................ 69

Selecting Wireless Network Settings Manually.............................................................................. 71

Wireless LAN Menu Settings .................................................................................................... 75

Selecting Wireless Network Settings in Windows.......................................................................... 77

Selecting Wireless Network Settings on Mac ................................................................................ 77

Setting Up Wireless Network Security ........................................................................................... 78

Setting Up Projector Network E-Mail Alerts ........................................................................................ 79

Network Projector E-mail Alert Messages ..................................................................................... 80

Setting Up Monitoring Using SNMP ................................................................................................... 81

Controlling a Networked Projector Using a Web Browser .................................................................. 83

Crestron RoomView Support.............................................................................................................. 86

Setting Up Crestron RoomView Support ....................................................................................... 87

Controlling a Networked Projector Using Crestron RoomView...................................................... 88

Registering a Digital Certificate on the Projector ................................................................................ 89

Importing a Web Server Certificate Using the Projector Menus..................................................... 89

Registering Digital Certificates from a Web Browser ..................................................................... 91

Digital Certificate Types................................................................................................................. 92

Using Basic Projector Features ............................................................................................................... 94

Turning On the Projector .................................................................................................................... 94

Using the Home Screen................................................................................................................. 96

Turning Off the Projector .................................................................................................................... 98

Selecting the Language for the Projector Menus................................................................................ 99

Setting the Date and Time................................................................................................................ 100

Image Shape.................................................................................................................................... 101

Correcting Image Shape with the Keystone Buttons.................................................................... 101

Correcting Image Shape with Quick Corner ................................................................................ 104

Correcting Image Shape with Arc Correction............................................................................... 105

Resizing the Image with the Wide and Tele Buttons ........................................................................ 107

Adjusting the Image Position............................................................................................................ 108

Focusing the Image.......................................................................................................................... 109

Remote Control Operation ............................................................................................................... 111

Using the Remote Control as a Wireless Mouse ......................................................................... 112

Using the Remote Control as a Pointer........................................................................................ 113

Selecting an Image Source .............................................................................................................. 114

Projection Modes ............................................................................................................................. 116

Changing the Projection Mode Using the Remote Control .......................................................... 116

Changing the Projection Mode Using the Menus......................................................................... 117

Image Aspect Ratio .......................................................................................................................... 118

Changing the Image Aspect Ratio ............................................................................................... 118

Available Image Aspect Ratios.................................................................................................... 119

Color Mode....................................................................................................................................... 120

Changing the Color Mode............................................................................................................ 120

Available Color Modes................................................................................................................. 120

Adjusting the Projector's Brightness Level ....................................................................................... 121

Constant Brightness Usage Hours .............................................................................................. 123

Turning On Automatic Luminance Adjustment ................................................................................. 125

Controlling the Volume with the Volume Buttons.............................................................................. 126

Projecting a PC Free Presentation ................................................................................................... 127

Supported PC Free File Types .................................................................................................... 127

Starting a PC Free Slide Show .................................................................................................... 128

Starting a PC Free Movie Presentation ....................................................................................... 130

PC Free Display Options ............................................................................................................. 132

Adjusting Projector Features ................................................................................................................. 134

Projecting Two Images Simultaneously............................................................................................ 135

Input Sources for Split Screen Projection .................................................................................... 137

Using Multiple Projectors (DuoLink) ................................................................................................. 137

Projector Identification System for Multiple Projector Control ...................................................... 138

Setting the Projector ID........................................................................................................... 138

Setting the Remote Control ID ................................................................................................ 139

Adjusting Color Uniformity ........................................................................................................... 140

Matching the Image Colors ......................................................................................................... 142

Adjusting RGBCMY .................................................................................................................... 144

Shutting Off the Picture and Sound Temporarily .............................................................................. 147

Stopping Video Action Temporarily .................................................................................................. 147

Zooming Into and Out of Images ...................................................................................................... 148

Projector Security Features.............................................................................................................. 149

Password Security Types ............................................................................................................ 149

Setting a Password ................................................................................................................. 150

Selecting Password Security Types........................................................................................ 151

Entering a Password to Use the Projector............................................................................... 152

Saving a User's Logo Image to Display................................................................................... 154

Locking the Projector's Buttons ................................................................................................... 156

Unlocking the Projector's Buttons ........................................................................................... 157

Installing a Security Cable ........................................................................................................... 157

Creating a User Pattern to Display ................................................................................................... 157

Copying Menu Settings Between Projectors .................................................................................... 159

Saving Settings to a USB Flash Drive.......................................................................................... 159

Transferring Settings from a USB Flash Drive ............................................................................. 160

Saving Settings to a Computer .................................................................................................... 162

Transferring Settings from a Computer ....................................................................................... 163

Using the Interactive Features ............................................................................................................... 166

Interactive Modes............................................................................................................................. 166

Using the Projected Screen as a Whiteboard (Built-in Whiteboard Mode)................................... 167

Drawing on a Projected Image (Built-in Annotation Mode) .......................................................... 168

Controlling Computer Features from a Projected Screen (PC Interactive Mode)......................... 170

PC Interactive Mode System Requirements ........................................................................... 172

Using the Interactive Pens ............................................................................................................... 173

Using the Pens ............................................................................................................................ 173

Pen Calibration............................................................................................................................ 176

Calibrating Automatically ........................................................................................................ 177

Calibrating Manually ............................................................................................................... 179

Using Finger Touch Interactivity ...................................................................................................... 183

Touch Unit Safety Instructions..................................................................................................... 184

Calibrating for Finger Touch Interactivity ..................................................................................... 185

Using Finger Touch Operations................................................................................................... 190

Using BrightLink with a Computer .................................................................................................... 192

Adjusting the Pen Operation Area ............................................................................................... 192

Easy Interactive Tools ................................................................................................................. 195

Windows Pen Input and Ink Tools .................................................................................................... 196

Enabling Windows Pen Input and Ink Tools................................................................................. 196

Using Windows Pen Input and Ink Tools ..................................................................................... 198

Using BrightLink Without a Computer .............................................................................................. 199

Using the Built-in Annotation Mode ............................................................................................. 199

Built-in Tools for Use Without a Computer................................................................................... 200

Using the Built-in Whiteboard Mode ............................................................................................ 203

Changing Pen Width and Color Using the Built-in Toolbar .......................................................... 204

Projector Control Toolbar ............................................................................................................ 204

Selecting a Networked Device Source ........................................................................................ 207

Splitting the Interactive Screen......................................................................................................... 209

Selecting Interactive Split Screen Settings .................................................................................. 211

Using Interactive Features with Two Projectors (DuoLink)............................................................... 212

Temporarily Using Interactive Features on One Projector ........................................................... 213

Adjusting the Menu Settings .................................................................................................................. 215

Using the Projector's Menus............................................................................................................. 215

Image Quality Settings - Image Menu .............................................................................................. 217

Input Signal Settings - Signal Menu.................................................................................................. 220

Projector Feature Settings - Settings Menu...................................................................................... 222

Projector Setup Settings - Extended Menu....................................................................................... 227

Projector Network Settings - Network Menu..................................................................................... 236

Projector Setup Settings - ECO Menu .............................................................................................. 237

Projector Information Display - Info Menu ........................................................................................ 240

Event ID Code List....................................................................................................................... 241

Projector Reset Options - Reset Menu............................................................................................. 243

Maintaining and Transporting the Projector ......................................................................................... 244

Projector Maintenance ..................................................................................................................... 244

Cleaning the Projection Window.................................................................................................. 244

Cleaning the Obstacle Sensor..................................................................................................... 245

Cleaning the Projector Case........................................................................................................ 246

Air Filter and Vent Maintenance ....................................................................................................... 246

Cleaning the Air Filter and Vents ................................................................................................. 247

Replacing the Air Filter ................................................................................................................ 250

Replacing the Remote Control Batteries .......................................................................................... 253

Replacing the Hard Pen Tips............................................................................................................ 254

Replacing the Soft Pen Tips ............................................................................................................. 256

Transporting the Projector................................................................................................................ 259

Solving Problems .................................................................................................................................... 260

Projection Problem Tips ................................................................................................................... 260

Projector Light Status ....................................................................................................................... 261

Using the Projector Help Displays .................................................................................................... 264

Solving Image or Sound Problems ................................................................................................... 264

Solutions When No Image Appears............................................................................................. 265

Solutions When Image is Incorrect Using the USB Display Function .......................................... 266

Solutions When "No Signal" Message Appears........................................................................... 266

Displaying From a PC Laptop ................................................................................................. 267

Displaying From a Mac Laptop ............................................................................................... 268

Solutions When "Not Supported" Message Appears ................................................................... 268

Solutions When Only a Partial Image Appears............................................................................ 268

Solutions When the Image is Not Rectangular ............................................................................ 269

Solutions When the Image Contains Noise or Static ................................................................... 270

Solutions When the Image is Fuzzy or Blurry .............................................................................. 270

Solutions When the Image Brightness or Colors are Incorrect .................................................... 271

Solutions to Sound Problems ...................................................................................................... 272

Solutions to Microphone Problems................................................................................................... 273

Solving Projector or Remote Control Operation Problems ............................................................... 274

Solutions to Projector Power or Shut-Off Problems..................................................................... 274

Solutions to Problems with the Remote Control........................................................................... 275

Solutions to Password Problems ................................................................................................. 275

Solving Network Problems ............................................................................................................... 276

Solutions When Wireless Authentication Fails ............................................................................ 276

Solutions When You Cannot Access the Projector Through the Web ......................................... 277

Solutions When Network Alert E-Mails are Not Received............................................................ 277

Solutions When the Image Contains Static During Network Projection ....................................... 278

Solving Interactive Problems............................................................................................................ 278

Solutions When "Error Occurred in the Easy Interactive Function" Message Appears................ 279

Solutions When the Interactive Pens Do Not Work...................................................................... 279

Solutions When the Interactive Pen Position Is Not Accurate...................................................... 280

Solutions When Manual Calibration Does Not Work.................................................................... 281

Solutions When the Interactive Pens Are Slow or Difficult to Use................................................ 281

Solutions When the Interactive Pens Cause Interference or Unwanted Effects .......................... 282

Solutions When Finger Touch Interactivity Does Not Work ......................................................... 282

Solutions When You Cannot Operate a Computer from the Projected Screen............................ 283

Solutions When Inking Does Not Appear in Microsoft Office ....................................................... 284

Solutions When the Pen Does Not Work Over a Network or the Toolbars Do Not Appear ......... 284

Where to Get Help............................................................................................................................ 284

Technical Specifications ........................................................................................................................ 286

General Projector Specifications ...................................................................................................... 286

Projector Light Source Specifications............................................................................................... 288

Interactive Pen Specifications .......................................................................................................... 288

Touch Unit Specifications ................................................................................................................ 289

Remote Control Specifications ......................................................................................................... 289

Projector Dimension Specifications.................................................................................................. 289

Projector Electrical Specifications .................................................................................................... 289

Projector Environmental Specifications............................................................................................ 290

Projector Safety and Approvals Specifications................................................................................. 291

Supported Video Display Formats.................................................................................................... 291

USB Display System Requirements................................................................................................. 293

Notices ..................................................................................................................................................... 295

Recycling.......................................................................................................................................... 295

Important Safety Information ............................................................................................................ 295

Laser Safety Information .................................................................................................................. 296

Laser Light Source Warning ............................................................................................................ 300

Important Safety Instructions............................................................................................................ 300

Restriction of Use ........................................................................................................................ 303

List of Safety Symbols (corresponding to IEC60950-1 A2)............................................................... 303

FCC Compliance Statement............................................................................................................. 307

Binding Arbitration and Class Waiver ............................................................................................... 308

Trademarks...................................................................................................................................... 311

Copyright Notice............................................................................................................................... 311

A Note Concerning Responsible Use of Copyrighted Materials................................................... 312

Copyright Attribution.................................................................................................................... 312

BrightLink 710Ui User's Guide

Welcome to the BrightLink 710Ui User's Guide.

For a printable PDF copy of this guide, click here.

Introduction to Your Projector

Refer to these sections to learn more about your projector and this manual.

Projector Features

Notations Used in the Documentation

Where to Go for Additional Information

Additional Projector Software and Manuals

Projector Part Locations

Projector Features

The BrightLink 710Ui projector includes these special features:

Unique interactive functions

• Annotation with or without a computer

• Annotation with two pens at the same time

• Enhanced Easy Interactive toolbar for Windows and Mac

• Touch-based interactivity

• Control your computer from the projected screen

• Print, save, and send your presentations without a computer

Bright, high-resolution projection system

• Up to 4000 lumens of color brightness (color light output) and white brightness (white light output)

Note: Color brightness (color light output) and white brightness (white light output) will vary depending

on usage conditions. Color light output measured in accordance with IDMS 15.4; white light output

measured in accordance with ISO 21118.

• Native resolution of 1920 × 1200 pixels (WUXGA)

Flexible connectivity

• Three HDMI ports (including one MHL-compatible port) for computer or video device connection

• Plug-and-play 3-in-1 USB projection, audio, and mouse control for instant setup

• Wired and wireless network support for projection

• Projector monitoring and control via remote network computer

• PC Free photo slide shows via connected USB memory devices or Epson document camera

• Use Epson iProjection (Windows/Mac) to simultaneously project up to four images from network

computers or mobile devices using the Epson iProjection app

• Projection from iOS or Android devices with the optional wireless LAN module and free Epson

iProjection app; visit epson.com/iprojection (U.S.) or epson.ca/iprojection (Canada) for more

information

Innovative display and operation features

• Long-life laser light source

• Support for side-by-side projector mounting with continuous annotation

• High digital zoom ratio for larger images in shorter projection distances

• 2500000:1 contrast ratio and Dynamic Contrast control for sharp, detailed images

• Built-in closed captioning decoder

• Powerful 16 W speaker system with audio out port for connecting external speakers

• Epson's Direct Power On and Auto Power On features for quick and easy setup

• Support for Crestron RoomView network monitoring systems

• Network message broadcast system to project timely messages to all networked projectors

Product Box Contents

Additional Components

Optional Equipment and Replacement Parts

Warranty and Registration Information

Parent topic: Introduction to Your Projector

Product Box Contents

Save all the packaging in case you need to ship the projector. Always use the original packaging (or

equivalent) when shipping.

Make sure your projector box included all of these parts:

1 Projector

2 Remote control

3 Remote control batteries (2 AA alkaline)

4 Interactive pens and replacement pen tips (4 soft tips, 2 hard tips)

5 Pen tray

6 Ultra-short throw wall mount (ELPMB53)

7 Power cord

8 16.4 ft (5 m) USB cable

9 USB extension cable (for saving)

10 Touch Unit connection cable

11 Touch Unit

12 Markers for Touch Unit setup

13 Touch Unit bracket

14 Labels (4)

15 Tape for securing markers

16 Infrared deflectors (8)

17 Password Protect sticker

Parent topic: Projector Features

Additional Components

Depending on how you plan to use the projector, you may need to obtain additional components.

Note: To connect a Mac that does not include a compatible video output port, you need to obtain an

adapter that allows you to connect to an input port on the projector. Contact Apple for compatible

adapter options. To connect a smartphone or tablet, you may need to obtain an adapter that allows you

to connect to the projector. This allows you to mirror your smartphone or tablet screens, watch movies,

and more. Contact your device manufacturer for compatible adapter options.

Unless listed as available from Epson in this table, see your local computer or electronics dealer for

purchase information.

Signal or connection

type

Additional component necessary

Composite video RCA-style video or A/V cable

Component video D-sub, 15-pin, component-to-VGA video cable or adapter

Available for purchase from Epson or an authorized Epson reseller.

HDMI Compatible HDMI cable

Available for purchase from Epson or an authorized Epson reseller.

Note: Older Mac computers (2009 and earlier) may not support HDMI

audio.

Signal or connection

type

Additional component necessary

MHL MHL-compatible device or device with an integrated MHL connector, MHL

cable, or HDMI cable and MHL adapter compatible with your device

Available for purchase from Epson or an authorized Epson reseller.

Audio from certain ports Commercially available audio cable compatible with your device

VGA To connect a computer through its VGA port to the projector's VGA video

port, you need a VGA computer cable.

Multiple BrightLink

projectors

To sync additional BrightLink projectors together, you need a stereo mini

cable (commercially available) or the remote control cable set (ELPKC28).

Available for purchase from Epson or an authorized Epson reseller.

Parent topic: Projector Features

Optional Equipment and Replacement Parts

You can purchase screens, other optional accessories, and replacement parts from an Epson authorized

reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in

Canada. Or you can purchase online at epsonstore.com (U.S. sales) or epsonstore.ca (Canadian sales).

Epson offers the following optional accessories and replacement parts for your projector:

Option or part Part number

Replacement air filter (ELPAF43) V13H134A43

Table projection mount (ELPMB29) V12H516020

Wireless LAN module (ELPAP10) V12H731P02

Epson DC-06 document camera (ELPDC06) V12H321005

Epson DC-07 document camera (ELPDC07) V12H759020

Epson DC-11 document camera (ELPDC11) V12H377020

Epson DC-12 document camera (ELPDC12) V12H594020

Epson DC-13 document camera (ELPDC13) V12H757020

Epson DC-20 document camera (ELPDC20) V12H500020

Epson DC-21 document camera (ELPDC21) V12H758020

Option or part Part number

Active speakers (ELPSP02) V12H467020

Additional interactive pen A (ELPPN05A) (orange) V12H773010

Additional interactive pen B (ELPPN05B) (blue) V12H774010

Replacement set of hard pen tips (ELPPS03) V12H775010

Replacement set of soft pen tips (ELPPS04) V12H776010

Remote control cable set (ELPKC28) V12H005C28

On Wall Cable Management Kit ELPCK01

PowerLite Pilot 2 control box (ELPCB02) V12H614020

100 inch (254 cm) whiteboard V12H831000

10 ft. (3.0 m) Component-to-VGA video cable ELPKC19

10 ft. (3.0 m) HD-TV cable ELPKC22

In addition to the accessories listed above, 1-year and 2-year extended service plans are available.

Parent topic: Projector Features

Warranty and Registration Information

Your projector comes with a basic warranty that lets you project with confidence. For details, see the

warranty that came with your projector.

In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you

won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere

in the United States, Canada, or Puerto Rico. See the Extra Care Road Service brochure for details.

Registering also lets you receive special updates on new accessories, products, and services.

Parent topic: Projector Features

Notations Used in the Documentation

Follow the guidelines in these notations as you read your documentation:

•Warnings must be followed carefully to avoid bodily injury.

•Cautions must be observed to avoid damage to your equipment.

•Notes contain important information about your projector.

•Tips contain additional projection information.

Parent topic: Introduction to Your Projector

Where to Go for Additional Information

Need quick help on using your projector? Here's where to look for help:

• Built-in help system

Press the Home button on the remote control or projector, press the arrow buttons to select the

help icon, and press Enter to get quick solutions to common problems.

• Help icon on the bottom whiteboard toolbar

Select the help icon to get a quick summary of the tools and features available.

•epson.com/support (U.S.) or epson.ca/support (Canada)

View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24

hours a day.

• If you still need help after checking this manual and any other sources listed here, you can use the

Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help."

Parent topic: Introduction to Your Projector

Related references

Where to Get Help

Additional Projector Software and Manuals

After connecting and setting up the projector, install the projector software. You may need to install it

from a software CD, if included, or download the software and manuals as necessary.

You can install the projector software programs listed here and view their manuals for instructions on

using them.

Note: If you still need help after checking this manual and the sources listed here, you can use the

Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help."

Projector software Manual Description

Epson Projector

Management (Windows

only)

Epson Projector

Management Operation

Guide

Lets you monitor and control your projector

through the network.

You can download the latest software and

documentation from the Epson web site. Go to

epson.com/support (U.S.) or epson.ca/support

(Canada) and select your projector.

Epson iProjection

(Windows/Mac)

Epson iProjection

Operation Guide

(Windows/Mac)

Lets you project the computer screens of

users over a network.

You can download the latest software and

documentation from the Epson web site. Go to

epson.com/support (U.S.) or epson.ca/support

(Canada) and select your projector.

EasyMP Network Updater

(Windows only)

EasyMP Network Updater

Operation Guide

Lets you update firmware for a projector over a

wired LAN.

You can download the latest software and

documentation from the Epson web site. Go to

epson.com/support (U.S.) or epson.ca/support

(Canada) and select your projector.

Epson iProjection app Instructions are included

with the app

Lets you project from an iOS device, Android

device, or Chromebook if your projector is

connected to a network that includes a

wireless access point.

Visit epson.com/iprojection (U.S.) or

epson.ca/iprojection (Canada) for more

information.

Easy Interactive Tools Easy Interactive Tools

Operation Guide

Lets you use your computer to interactively

draw on projected images

—Open Source Software

License

You can download this document from the

Epson web site. Go to epson.com/support

(U.S.) or epson.ca/support (Canada) and

select your projector.

Parent topic: Introduction to Your Projector

Projector Part Locations

Check the projector part illustrations to learn about the parts on your projector.

Projector Parts - Front/Side

Projector Parts - Top/Side

Projector Parts - Back Panel

Projector Parts - Base

Projector Parts - Control Panel

Projector Parts - Remote Control

Projector Parts - Interactive Pens and Pen Tray

Projector Parts - Touch Unit

Parent topic: Introduction to Your Projector

Projector Parts - Front/Side

1 Remote control receiver

2 Status lights

3 Speaker

4 Exhaust vent

5 Cable cover screws

6 Cable cover

Parent topic: Projector Part Locations

Projector Parts - Top/Side

1 Air filter cover latch

2 Wireless LAN light

3 Obstacle sensors

4 Remote receiver

5 Projection window

6 Interactive pen receiver

7 Control panel

8 Security cable installation slot

9 Air filter cover

10 Focus lever

11 Air intake vent (air filter)

Parent topic: Projector Part Locations

Related references

Projector Light Status

Projector Parts - Back Panel

1Monitor Out port

2Video port

3Audio port for use with the Video port

4Audio Out port

5Audio port for use with the Computer port

6Mic port for use with a microphone

7 Power inlet

8HDMI 1/MHL port

9HDMI 2 port

10 HDMI 3 port

11 Network (LAN) port

12 USB-B port for computer connection

13 USB-A ports for USB memory device or document camera

14 Computer port

15 TCH port for the Touch Unit connection cable

16 SYNC In/Out ports

17 RS-232C port

18 Wireless LAN module port

Parent topic: Projector Part Locations

Related concepts

Projector Connections

Projector Parts - Base

1 Ceiling mount holes (4)

2 Rear foot holes (2)

3 Security cable attachment point

4 Wall mounting plate holes (4)

5 Illumination sensor

6 Front foot hole

Parent topic: Projector Part Locations

Projector Parts - Control Panel

1Source Search button (searches for connected video sources)

2 (Enter) button (selects options)

3 Vertical keystone adjustment buttons (display the adjustment screen and adjust screen shape)

and arrow buttons

4Esc button (cancels/exits functions)

5W/T(Wide/Tele) buttons (adjust projected image size) and arrow buttons

6Menu button (accesses projector menu system)

7Home button (accesses projector Home screen)

8 Power button

Parent topic: Projector Part Locations

Projector Parts - Remote Control

1 Power button

2Computer button

3HDMI/Video button (cycles through connected HDMI and video sources)

4 Numeric buttons

5Auto button (automatically adjusts position, tracking, and sync settings)

6Aspect button (selects the image aspect ratio)

7Num button (when held down, switches numeric buttons to number function)

8Menu button (accesses projector menu system)

9 Arrow buttons (move through on-screen options and control wireless mouse functions)

10 Enter button (selects options and controls wireless mouse functions)

11 User button (customizable for different functions)

12 Page up/down buttons (control presentation slides)

13 E-Zoom +/–buttons (zoom into and out of the image)

14 A/V Mute button (turns off picture and sound)

15 Split button (splits the screen between two image sources)

16 Strap attachment point

17 Home button (accesses projector Home screen)

18 Freeze button (stops video action)

19 Volume up/down buttons (adjust speaker volume)

20 Pointer button (activates on-screen pointer)

21 Esc button (cancels/exits functions and controls wireless mouse functions)

22 Pen Mode button (cycles between PC Interactive and PC Free Annotation modes)

23 ID button (selects a projector to use with the remote control)

24 Color Mode button (selects display modes)

25 Link Menu button (displays settings or performs functions for the device connected to the HDMI

port)

26 LAN button (connects to a network source)

27 USB button (cycles between USB Display and USB-A ports)

28 Source Search button (searches for connected sources)

29 Remote control emitter

Parent topic: Projector Part Locations

Projector Parts - Interactive Pens and Pen Tray

1 Pen tip

2 Battery light

3 Function button

4 Attachment for optional strap or cord

5 Battery cover

1 Installation magnets

2 Mounting holes

3 Security lock hole

Parent topic: Projector Part Locations

Projector Parts - Touch Unit

Front (Cover On)

Front (Cover Off)

1 Dial cover

2 Touch unit (TCH) port

3 Security cable installation slot

4 Adjustment dials

5 Power light

6 Mounting holes

Rear

1 Laser diffusion ports

2 Installation magnets

Parent topic: Projector Part Locations

Setting Up the Projector

Follow the instructions in these sections to set up your projector for use.

Projector Placement

Removing and Attaching the Cable Cover

Projector Connections

Installing Batteries in the Remote Control

Installing Batteries in the Pens

Projector Placement

Your ultra-short throw projector is designed to be installed on a wall (with a wall mount) or vertically on a

table (with a table mount) to create an interactive tabletop workspace.

You can also place the projector on a flat surface such as a desk or table to project in a portable setup.

Note: Finger touch is available only if the projector is installed on a wall (with a wall mount) or vertically

on a table (with a table mount).

Keep these considerations in mind as you select a projector location:

• Follow the instructions in the Installation Guide provided with your mounting hardware to install the

projector.

• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or

next to anything that could block the vents.

• Position the projector within reach of a grounded electrical outlet or extension cord.

• If installing vertically on a table, the table projection mount (V12H516020) is required.

• If installing on a wall, the wall mount (V12H902020) is required.

• If the projector is not mounted, place it on a sturdy, level surface.

• For finger touch, make sure the projection surface is flat, smooth, and unwarped with no more than

0.2 inch (5 mm) of unevenness in any direction.

Projector Setup and Installation Options

Projection Distance

Parent topic: Setting Up the Projector

Projector Setup and Installation Options

You can set up or install your projector in the following ways:

Mounted on the wall or ceiling

Mounted vertically on a table to create an interactive workspace

Mounted on the wall or ceiling and projecting from behind a translucent screen (interactive features not

supported)

Front projection from a table or portable cart (finger touch not supported)

Rear projection from a table or portable cart behind a translucent screen (interactive features not

supported)

Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an

angle.

If you project from a table or portable cart, or from the rear, be sure to select the correct Projection

option in the projector's menu system.

Note: You cannot use the interactive pens or finger touch when projecting from behind a screen.

Parent topic: Projector Placement

Projection Distance

The distance at which you place the projector from the screen determines the approximate size of the

image. The image size increases the farther the projector is from the screen, but can vary depending on

the zoom factor, aspect ratio, and other settings.

Refer to the tables in the Installation Guide to determine approximately how far to place the projector

from the screen based on the size of the projected image. (Conversion figures may have been rounded

up or down.) You can also use the Projection Distance Calculator here (U.S.), here (Canada), or here

(Caribbean).

Parent topic: Projector Placement

Removing and Attaching the Cable Cover

Before you can connect equipment to your projector, you need to remove the cable cover.

1. Use a screwdriver to remove both of the cable cover screws.

2. Slide off the cable cover.

To attach the cable cover, slide it into position and tighten the screws with a screwdriver.

Parent topic: Setting Up the Projector

Projector Connections

See these sections to connect the projector to a variety of projection sources.

Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode

to ensure the projector's internal temperature is regulated properly.

Connecting to Computer Sources

Connecting to Video Sources

Connecting External Output Devices

Connecting to External USB Devices

Connecting to a Document Camera

Connecting Multiple Projectors of the Same Model

Parent topic: Setting Up the Projector

Related references

Projector Setup Settings - Extended Menu

Additional Components

Connecting to Computer Sources

Follow the instructions in these sections to connect a computer to the projector.

Connecting to a Computer for USB Video and Audio

Connecting to a Computer for VGA Video and Audio

Connecting to a Computer for HDMI Video and Audio

Connecting to a Computer for Sound

Parent topic: Projector Connections

Connecting to a Computer for USB Video and Audio

If your computer meets the system requirements, you can send video and audio output to the projector

through the computer's USB port (preferably USB 2.0). Connect the projector to your computer using a

USB cable.

Note: A USB connection may cause a delay for content requiring high bandwidth, such as movies. An

HDMI connection is recommended for projecting movies, video games, and other home entertainment

content.

1. Turn on your computer.

2. Set the USB Type B setting in the Extended menu to one of the USB Display options.

3. Connect the cable to your projector's USB-B port.

4. Connect the other end to any available USB port on your computer.

5. To use USB Display, do one of the following:

•Windows 10/Windows 8.x: Click EPSON_PJ_UD in the upper right-corner, then select Run

EMP_UDSE.exe in the dialog box that appears to install the Epson USB Display software.

•Windows 7/Windows Vista: Select Run EMP_UDSE.exe in the dialog box that appears to install

the Epson USB Display software.

•Mac: The USB Display setup folder appears on your screen. Select USB Display Installer and

follow the on-screen instructions to install the Epson USB Display software.

Follow any on-screen instructions. You need to install this software only the first time you connect

the projector to the computer.

The projector displays the image from your computer's desktop and outputs sound, if your presentation

contains audio.

Parent topic: Connecting to Computer Sources

Related references

Projector Setup Settings - Extended Menu

Connecting to a Computer for VGA Video and Audio

You can connect the projector to your computer using a VGA computer cable.

Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for

video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port.

Contact Apple for compatible adapter options.

1. If necessary, disconnect your computer's monitor cable.

2. Connect the VGA computer cable to your computer's monitor port.

3. Connect the other end to a Computer port on the projector.

4. Tighten the screws on the VGA connector.

Parent topic: Connecting to Computer Sources

Connecting to a Computer for HDMI Video and Audio

If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable.

Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for

video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port.

Contact Apple for compatible adapter options. Older Mac computers (2009 and earlier) may not support

audio through the HDMI port.

1. Connect the HDMI cable to your computer's HDMI output port.

2. Connect the other end to one of the projector's HDMI ports.

Note: The projector converts the digital audio signal sent from your computer into a mono analog signal

for the internal speaker or a stereo analog signal if you are connecting to external speakers. (Make sure

the HDMI audio playback device on your computer's audio settings is set to EPSON PJ.)

Note: If you have problems hearing audio through the HDMI connection, you can use one of the

projector's audio ports instead to play sound. Connect one end of an optional 3.5 mm stereo mini-jack

audio cable to one of the projector's audio ports and the other end to your computer's audio out port.

Then select the audio port you connected to as the HDMI1 Audio Output,HDMI2 Audio Output or

HDMI3 Audio Output setting in the Extended menu.

Parent topic: Connecting to Computer Sources

Connecting to a Computer for Sound

If your computer presentation includes sound and you did not connect it to the projector's USB-B or an

HDMI port, you can still play sound through the projector's speaker system. Just connect an optional

3.5 mm stereo mini-jack audio cable as described here.

1. Connect the audio cable to your laptop's headphone or audio-out jack, or your desktop's speaker or

audio-out port.

2. Connect the other end to the Audio port that corresponds to the Computer port you are using.

Parent topic: Connecting to Computer Sources

Connecting to Video Sources

Follow the instructions in these sections to connect video devices to the projector.

Connecting to an HDMI Video Source

Connecting to an MHL-Compatible Device

Connecting to a Component Video Source

Connecting to a Composite Video Source

Connecting to a Video Source for Sound

Parent topic: Projector Connections

Connecting to an HDMI Video Source

If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.

The HDMI connection provides the best image quality.

1. Connect the HDMI cable to your video source's HDMI output port.

2. Connect the other end to one of the projector's HDMI ports.

Note: The projector converts the digital audio signal sent from your video source into a mono analog

signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.

Note: If you have problems hearing audio through the HDMI connection, you can use one of the

projector's audio ports instead to play sound. Connect one end of an optional 3.5 mm stereo mini-jack

audio cable to one of the projector's audio ports and the other end to your video source's audio out port.

Then select the audio port you connected to as the HDMI1 Audio Output,HDMI2 Audio Output or

HDMI3 Audio Output setting in the Extended menu.

Parent topic: Connecting to Video Sources

Related references

Projector Setup Settings - Extended Menu

Connecting to an MHL-Compatible Device

If you have an MHL-compatible smartphone or tablet, you can connect it to the projector using an HDMI

cable with a device-compatible MHL adapter. If you have a device with a built-in MHL connector, plug it

directly into the HDMI 1/MHL port.

Note: Some connected devices may not charge when using an MHL adapter.

1. Connect the MHL cable or adapter to your device's Micro-USB port.

2. If you are using an MHL adapter, connect it to an MHL-compatible HDMI cable.

3. Connect the other end of the cable to the projector's HDMI 1/MHL port.

Note: The projector converts the digital audio signal sent from your video source into a mono analog

signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.

Parent topic: Connecting to Video Sources

Connecting to a Component Video Source

If your video source has component video ports, you can connect it to the projector using an optional

component-to-VGA video cable. Depending on your component ports, you may need to use an adapter

cable along with a component video cable.

1. Connect the component connectors to your video source's color-coded component video output

ports, usually labeled Y,Pb,Pr or Y,Cb,Cr. If you are using an adapter, connect these connectors

to your component video cable.

2. Connect the VGA connector to the Computer port on the projector.

3. Tighten the screws on the VGA connector.

If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's

Signal menu.

Parent topic: Connecting to Video Sources

Related references

Input Signal Settings - Signal Menu

Connecting to a Composite Video Source

If your video source has a composite video port, you can connect it to the projector using an optional

RCA-style video or A/V cable.

1. Connect the cable with the yellow connector to your video source's yellow video output port.

2. Connect the other end to the projector's Video port.

Parent topic: Connecting to Video Sources

Connecting to a Video Source for Sound

You can play sound through the projector's speaker system if your video source has audio output ports.

If you are projecting video using the Video or Computer port, connect the projector to the video source

using an optional stereo mini-jack audio cable.

Note: If you connected your video source to the projector using an HDMI cable, the audio signal is

transferred with the video signal; you do not need an additional cable for sound.

1. Connect the audio cable to your video source's audio-out ports.

2. Connect the other end of the cable to the projector's Audio port that corresponds to the port you are

using for video.

Parent topic: Connecting to Video Sources

Connecting External Output Devices

See these sections to connect the projector to external output devices.

Connecting to an External Computer Monitor

Connecting to External Speakers

Connecting a Microphone

Parent topic: Projector Connections

Connecting to an External Computer Monitor

If you connected a computer to the projector's Computer port, you can also connect an external monitor

to the projector. This lets you see your presentation on the external monitor even when the projected

image is not visible.

If you want to output images to an external monitor when the projector is turned off, you need to select

Always On as the A/V Output setting in the projector's Extended menu.

Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.

1. Make sure your computer is connected to the projector's Computer port.

2. Connect the external monitor's cable to your projector's Monitor Out port.

Note: Content you draw using the built-in interactive features is not displayed on an external monitor

unless you draw it using Easy Interactive Tools software.

Parent topic: Connecting External Output Devices

Connecting to External Speakers

To enhance the sound from your presentation, you can connect the projector to external self-powered

speakers. You can control the volume using the projector's remote control.

You can also connect the projector to an amplifier with speakers.

If you want to output audio from the external speakers when the projector is turned off, you need to

select Always On as the A/V Output setting in the projector's Extended menu.

Note: The projector's built-in speaker system is disabled when you connect external speakers.

1. Make sure your computer or video source is connected to the projector with both audio and video

cables as necessary.

2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-

jack cable, or another type of cable or adapter.

3. Connect one end of the cable to your external speakers as necessary.

4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port.

Parent topic: Connecting External Output Devices

Related references

Projector Setup Settings - Extended Menu

Connecting a Microphone

You can connect a microphone to the projector's Mic port to provide audio support during presentations.

Note: If you want to output audio from the microphone when the projector is off, select Always On as

the A/V Output setting in the Extended menu.

1. Connect the microphone cable to the projector's Mic port.

2. Turn on the microphone, if necessary.

3. If you hear a crackling noise or the volume is too high or low, adjust the Mic Input Level setting in

the Settings menu.

Parent topic: Connecting External Output Devices

Connecting to External USB Devices

Follow the instructions in these sections to connect external USB devices to the projector.

USB Device Projection

Connecting a USB Device or Camera to the Projector

Selecting the Connected USB Source

Disconnecting a USB Device or Camera From the Projector

Parent topic: Projector Connections

Related tasks

Starting a PC Free Slide Show

USB Device Projection

You can project images and other content without using a computer or video device by connecting any of

these devices to your projector:

• USB flash drive

• Digital camera or smartphone

• USB hard drive

• Multimedia storage viewer

Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices,

and must be USB Mass Storage Class-compliant.

Note: USB hard drives must meet these requirements:

• USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported)

• Formatted in FAT or FAT32

• Self-powered by their own AC power supplies (bus-powered hard drives are not recommended)

• Does not have multiple partitions

You can project slide shows from image files on a connected USB device.

Parent topic: Connecting to External USB Devices

Related tasks

Starting a PC Free Slide Show

Connecting a USB Device or Camera to the Projector

You can connect your USB device or camera to the projector's USB-A port and use it to project images

and other content.

1. If your USB device came with a power adapter, plug the device into an electrical outlet.

2. Connect the USB cable (or USB flash drive) to the projector's USB-A port.

Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not

operate correctly.

3. Connect the other end of the cable (if applicable) to your device.

Parent topic: Connecting to External USB Devices

Related tasks

Starting a PC Free Slide Show

Selecting the Connected USB Source

You can switch the projector's display to the source you connected to one of the USB-A ports. To display

the connected USB device, select the USB1 source.

Note: If you have connected a document camera, select the USB2 source.

1. Make sure the connected USB source is turned on, if necessary.

2. Press the Source Search button on the remote control and select the USB1 or USB2 source.

Parent topic: Connecting to External USB Devices

Related tasks

Starting a PC Free Slide Show

Disconnecting a USB Device or Camera From the Projector

When you finish presenting with a connected USB device or camera, you must prepare to disconnect the

device from the projector.

1. If the device has a power button, turn off and unplug the device.

2. Disconnect the USB device or camera from the projector.

Parent topic: Connecting to External USB Devices

Related tasks

Starting a PC Free Slide Show

Connecting to a Document Camera

You can connect a document camera to your projector to project images viewed by the camera.

Note: If you connect a document camera to one of the USB-A ports on the projector, select the USB2

source to display the image. You cannot simultaneously connect two document cameras to the USB-A

ports.

Depending on your Epson document camera model, do one of the following to connect the document

camera to your projector:

• For the Epson DC-06 document camera, locate the USB cable that came with the camera and

connect it to the projector's USB-A port and to the document camera's USB Type B port.

• For the Epson DC-07 document camera, locate the USB cable that came with the camera and

connect it to the projector's USB-A port and to the document camera's USB Type B port.

• For the Epson DC-11 document camera, connect it to the projector's Computer or Video port and to

the corresponding port on the document camera. See the document camera manual for details.

• For the Epson DC-12 document camera, connect it to the projector's HDMI,Computer, or Video port

and to the corresponding port on the document camera. See the document camera manual for details.

• For the Epson DC-13 document camera, connect it to the projector's HDMI,Computer, or Video port

and to the corresponding port on the document camera. See the document camera manual for details.

• For the Epson DC-20 document camera, connect it to the projector's HDMI,Computer, or Video port

and to the corresponding port on the document camera. See the document camera manual for details.

• For the Epson DC-21 document camera, connect it to the projector's HDMI,Computer, or Video port

and to the corresponding port on the document camera. See the document camera manual for details.

Note: For additional features supported by software, connect your document camera to your computer

instead of the projector. See the document camera manual for details.

Parent topic: Projector Connections

Connecting Multiple Projectors of the Same Model

If you use the interactive features of multiple projectors of the same model in the same room, you need

to synchronize the projectors. To do this, connect the optional remote control cable set (V12H005C28) or

a stereo mini cable to the SYNC port on each projector.

1. Connect one end of the cable to the SYNC In port on one projector, and connect the other end to the

SYNC Out port on the other projector.

Note: If you are connecting three or more projectors, connect the projectors in a chain as shown.

2. In the Extended menu of each projector, set the Sync of Projectors setting to Wired.

Note: If you are syncing multiple projectors with a combination of wired and infrared connections, set

the Wired Sync Mode setting to Mode 2 in each projector's Extended menu. If you are syncing

using an infrared connection and the projectors are more than 6.6 feet (2 m) apart, set the Distance

of Projectors setting to Mode 1 in each projector's Extended menu.

Parent topic: Projector Connections

Related concepts

Using Multiple Projectors (DuoLink)

Related references

Projector Setup Settings - Extended Menu

Installing Batteries in the Remote Control

The remote control uses the two AA batteries that came with the projector.

Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,

or mix new and old batteries.

1. Remove the battery cover.

2. Insert the batteries with the +and –ends facing as shown.

3. Replace the battery cover and press it down until it clicks into place.

Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat

or flame. Keep batteries out of the reach of children; they are choking hazards and are very

dangerous if swallowed.

Parent topic: Setting Up the Projector

Installing Batteries in the Pens

Each pen uses one AA battery.

1. Remove the battery cover as shown.

2. Insert the battery with the +and –ends facing as shown.

3. Replace the battery cover and press it down until it clicks into place.

Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat

or flame. Keep batteries out of the reach of children; they are choking hazards and are very

dangerous if swallowed.

Parent topic: Setting Up the Projector

Using the Projector on a Network

Follow the instructions in these sections to set up your projector for use on a network.

Note: The interactive features may be slower over a network connection than over a USB connection.

Wired Network Projection

Wireless Network Projection

Setting Up Projector Network E-Mail Alerts

Setting Up Monitoring Using SNMP

Controlling a Networked Projector Using a Web Browser

Crestron RoomView Support

Registering a Digital Certificate on the Projector

Wired Network Projection

You can project through a wired network. To do this, you connect the projector to your network with an

Ethernet cable, and then set up your projector and computer for network projection.

After connecting and setting up the projector, install the projector software. You may need to install it

from a software CD, if included, or download the software and manuals as necessary.

Note: If your projector is connected via a LAN (Ethernet) cable to a network that includes a wireless

access point, you can connect to the projector wirelessly through the access point using the Epson

network software.

Connecting to a Wired Network

Selecting Wired Network Settings

Parent topic: Using the Projector on a Network

Related references

Additional Projector Software and Manuals

Connecting to a Wired Network

To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network

cable. To ensure proper data transmission, use a Category 5 shielded cable or better.

1. Connect one end of the network cable to your network hub, switch, or router.

2. Connect the other end of the cable to the projector's LAN port.

Parent topic: Wired Network Projection

Selecting Wired Network Settings

Before you can project from computers on your network, you must select the network settings for the

projector using its menu system.

Note: Make sure you already connected the projector to your wired network using the LAN port.

1. Turn on the projector.

2. Press the Menu button.

3. Select the Network menu and press Enter.

4. Select Network Configuration and press Enter.

5. Select the Basic menu and press Enter.

6. Select the following basic options as necessary:

•Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the

projector over the network.

•PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the

PJLink protocol for projector control.

•Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing

the Remote or Basic Control screen in Epson Web Control. (Default user name is

EPSONREMOTE; default password is guest.)

•Web Control Password lets you enter a password up to 8 alphanumeric characters long for

accessing the projector over the web. (Default user name is EPSONWEB; default password is

admin.)

•Moderator Password lets you enter a password up to 4 numbers long for accessing the projector

as a moderator with the Epson iProjection (Windows/Mac) software or the Epson iProjection app.

(No default password.)

•Projector Keyword lets you turn on a security password to prevent access to the projector by

anyone not in the room with it. You must enter a displayed, randomized keyword from a computer

using the Epson iProjection (Windows/Mac) software to access the projector.

•Display Keyword lets you select whether or not to display a projector keyword on the projected

image when using the Epson iProjection (Windows/Mac) software to access the projector.

•Display LAN Info lets you select how the projector displays network information. You can select

an option to display a QR code that lets you quickly connect your iOS or Android devices using the

Epson iProjection app.

Note: Use the displayed keyboard to enter the name, passwords, and keyword. Press the arrow

buttons on the remote control to highlight characters and press Enter to select them.

7. Select the Wired LAN menu and press Enter.

8. If necessary, select IP Settings and press Enter.

9. Select your IP Settings as necessary:

• If your network assigns addresses automatically, turn on the DHCP setting.

• If you must set addresses manually, turn off DHCP and enter the projector's IP Address,Subnet

Mask, and Gateway Address as needed.

Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on

the remote control. To select a highlighted number, press Enter.

10. To prevent display of the IP address on the standby screen, turn off IP Address Display.

11. When you finish selecting settings, select Complete and follow the on-screen instructions to save

your settings and exit the menus.

Parent topic: Wired Network Projection

Wireless Network Projection

You can project over a wireless network. To do this, you must set up your projector and computer for

wireless projection.

Note: The Epson 802.11b/g/n wireless LAN module is not included with your projector and is optional.

To connect wirelessly to your projector, configure the connection using the projector's Network menus.

After connecting and setting up the projector, install the projector software. You may need to install it

from a software CD, if included, or download the software and manuals as necessary.

Note: If your projector is connected via a LAN cable to a network that includes a wireless access point,

you can connect to the projector wirelessly through the access point using the Epson network software.

Installing the Wireless LAN Module

Connecting Directly to a Smartphone or Tablet

Using Quick Wireless Connection (Windows)

Selecting Wireless Network Settings Manually

Selecting Wireless Network Settings in Windows

Selecting Wireless Network Settings on Mac

Setting Up Wireless Network Security

Parent topic: Using the Projector on a Network

Related references

Additional Projector Software and Manuals

Optional Equipment and Replacement Parts

Installing the Wireless LAN Module

To use the projector over a wireless network, install the Epson 802.11b/g/n wireless module in the

projector. Do not install any other type of wireless module.

Caution: Never remove the module while its indicator light is blue or flashing, or while you are projecting

wirelessly. You may damage the module or lose data.

Note: The wireless LAN module is not included with your projector.

1. Turn off the projector and unplug the power cord.

2. Unscrew and remove the cable cover if it is attached (screwdriver not included).

3. Insert the wireless LAN module into the port shown here.

4. Replace the cable cover and tighten the screws.

5. Plug in and turn on the projector.

Parent topic: Wireless Network Projection

Connecting Directly to a Smartphone or Tablet

You can display a QR code on the screen and use it to connect a single smartphone or tablet to your

projector with the Epson iProjection app.

1. Download the latest version of the Epson iProjection app from the App Store or Google Play and

install it on your smartphone or tablet.

2. Press the Menu button on the projector or the remote control.

3. Select the Network menu and press Enter.

4. Select On as the Wireless LAN Power setting, if necessary.

5. Select Network Configuration and press Enter.

6. Select the Wireless LAN menu and press Enter.

7. Select Connection Mode and press Enter.

8. Select Quick and press Enter, then press Enter again.

9. When you finish selecting settings, select Complete and follow the on-screen instructions to save

your settings and exit the menus.

10. Press the Home button on the projector or the remote control.

11. Select the QR code icon and press Enter.

Your projector displays a QR code on the projection surface.

12. Open the Epson iProjection app on your smartphone or tablet.

13. Use the QR code reader feature to read the QR code and connect your device to the projector.

Note: The projector and the smartphone must be on the same wireless network in order to establish

a connection.

Your smartphone or tablet is now connected to your projector. Visit epson.com/iprojection (U.S.) or

epson.ca/iprojection (Canada) for information on controlling your projector with the Epson iProjection

app.

Parent topic: Wireless Network Projection

Using Quick Wireless Connection (Windows)

You can create a Quick Wireless Connection USB Key to quickly connect the projector to a Windows

computer wirelessly. Then you can project your presentation and remove the key when you are done.

Note: A USB flash drive is not included with your projector.

1. Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection

(Windows/Mac) software.

Note: See the online Epson iProjection Operation Guide (Windows/Mac) for instructions.

2. Make sure the wireless LAN module is installed in your projector.

3. Turn on the projector.

4. Press the LAN button on the remote control.

The LAN standby screen is displayed.

5. Verify the SSID and IP address.

6. Insert the USB key into the projector's USB-A port.

You see a projected message that the network information update is complete.

7. Remove the USB key.

8. Insert the USB key into a USB port on your computer.

Note: In Windows Vista, if you see the AutoPlay window, select Run MPPLaunch.exe, then select

Allow on the next screen.

9. Follow the on-screen instructions to install the Epson iProjection (Windows/Mac) software.

Note: If you see a Windows Firewall message, click Yes to disable the firewall. You need

administrator authority to install the software. If it is not installed automatically, double-click

MPPLaunch.exe in the USB key.

After a few minutes, your computer image is displayed by the projector. If it does not appear, press

the LAN or Source Search button on your remote control or restart your computer.

10. Run your presentation as necessary.

11. When you finish projecting wirelessly, select the Safely Remove Hardware option in the Windows

taskbar, then remove the USB key from your computer.

Note: You can share the USB key with other computers without disconnecting your computer. You

may need to restart your computer to reactivate your wireless LAN connection.

Parent topic: Wireless Network Projection

Related references

Additional Projector Software and Manuals

Selecting Wireless Network Settings Manually

Before you can project from your wireless network, you must select the network settings for the projector

using its menu system.

1. Turn on the projector.

2. Press the Menu button.

3. Select the Network menu and press Enter.

4. Make sure the Wireless LAN Power setting is set to On.

5. Select Network Configuration and press Enter.

6. Select the Basic menu and press Enter.

7. Select the following basic options as necessary:

•Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the

projector over the network.

•PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the

PJLink protocol for projector control.

•Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing

the Remote or Basic Control screen in the Epson Web Control. (Default user name is

EPSONREMOTE; default password is guest.)

•Web Control Password lets you enter a password up to 8 alphanumeric characters long for

accessing the projector over the web. (Default user name is EPSONWEB; default password is

admin.)

•Moderator Password lets you enter a password up to 4 numbers long for accessing the projector

as a moderator with the Epson iProjection (Windows/Mac) software or the Epson iProjection app.

•Projector Keyword lets you turn on a security password to prevent access to the projector by

anyone not in the room with it. The projector displays a random keyword that you must enter from

a computer using the Epson iProjection (Windows/Mac) software or an iOS or Android device

using the Epson iProjection app.

•Display Keyword lets you display a keyword on the projected image when accessing the

projector from a computer using the Epson iProjection (Windows/Mac) software or an iOS or

Android device using the Epson iProjection app.

•Display LAN Info lets you select how the projector displays network information. You can select

an option to display a QR code that lets you quickly connect your iOS or Android devices with the

Epson iProjection app.

Note: Use the displayed keyboard to enter the name, passwords and keyword. Press the arrow

buttons on the remote control to highlight characters and press Enter to select them.

8. Select the Wireless LAN menu and press Enter.

9. Select the settings on the Wireless LAN menu as necessary for your network.

10. When you finish selecting settings, select Complete and follow the on-screen instructions to save

your settings and exit the menus.

Note: Check your network security settings after completing the wireless settings.

After you complete the wireless settings for your projector, you need to select the wireless network on

your computer, or iOS or Android device.

Wireless LAN Menu Settings

Parent topic: Wireless Network Projection

Wireless LAN Menu Settings

Setting Options Description

Connection Mode Quick

Advanced

Selects the type of wireless

connection:

Quick: lets you directly connect

to multiple devices and

computers using the projector's

wireless network (requires the

optional wireless LAN module).

Advanced: lets you connect to

multiple devices and computers

via a wireless network access

point

Search Access Point To Search View Search for available wireless

network access points in

Advanced connection mode

SSID Up 32 alphanumeric characters Manually set the SSID (network

name) of the wireless LAN

system the projector is

connecting to

Setting Options Description

Security Open

WPA2-PSK

WPA/WPA2-PSK

WPA2-EAP

WPA/WPA2-EAP

Selects the type of security used

on the wireless network

WPA2-PSK: uses WPA2 security

with AES for encryption. Use the

Passphrase value to establish a

connection from a computer

WPA/WPA2-PSK: uses WPA

personal mode; encryption is

dependent on the access point

settings; Passphrase must be

the same as the access point

WPA2-EAP: uses WPA2 security

with AES for encryption

WPA/WPA2-EAP: uses WPA

enterprise mode; encryption is

dependent on the access point

settings

Passphrase Various passphrases from 8 to

32 characters (from a web

browser, the maximum is 63

characters)

Selects the pre-shared key used

on the network; passphrases are

case-sensitive. If the network

settings are reset after the

passphrase has been changed

more than once, the first

passphrase is restored.

EAP Method EAP Type

User name

Password

Client Certificate

Verify Server Cert.

CA Certificate

RADIUS Server Name

Sets the EAP settings for WPA2-

EAP and WPA/WPA2-EAP

security

Setting Options Description

Channel 1ch

6ch

11ch

In Quick connection mode,

selects the frequency band

(channel) used by the wireless

LAN

IP Settings DHCP (On or Off)

IP Address

Subnet Mask

Gateway Address

Selects DHCP if your network

assigns IP addresses

automatically, or turns off DHCP

so you can enter the network's IP

address, subnet mask, and

gateway address as needed

SSID Display On

Off

Selects whether to display the

SSID on the network standby

screen and Home screen

IP Address Display On

Off

Selects whether to display the IP

address on the network standby

screen and Home screen

Parent topic: Selecting Wireless Network Settings Manually

Selecting Wireless Network Settings in Windows

Before connecting to the projector, select the correct wireless network on your computer.

1. To access your wireless utility software, access the Desktop and double-click the network icon on

the Windows taskbar.

2. Do one of the following:

• If your projector is set up on an existing network (Advanced mode), select the network name

(SSID).

• If your projector is configured for Quick mode, select the projector's SSID.

3. Click Connect.

Parent topic: Wireless Network Projection

Selecting Wireless Network Settings on Mac

Before connecting to the projector, select the correct wireless network on your Mac.

1. Click the AirPort icon on the menu bar at the top of the screen.

2. Make sure AirPort is turned on, then do one of the following:

• If your projector is set up on an existing network (Advanced mode), select the network name

(SSID).

• If your projector is configured for Quick mode, select the projector's SSID.

Parent topic: Wireless Network Projection

Setting Up Wireless Network Security

You can set up security for your projector to use on a wireless network. Set up one of the following

security options to match the settings used on your network:

• WPA2-PSK

• WPA2-EAP*

• WPA/WPA2-PSK*

• WPA/WPA2-EAP*

* Available only in Advanced connection mode.

Note: If you want to set up WPA2-EAP or WAP/WAP2-EAP security, register your digital certificate file

and place it on the USB storage device you will install in the projector.

1. Press the Menu button.

2. Select the Network menu and press Enter.

3. Select Network Configuration and press Enter.

4. Select the Wireless LAN menu and press Enter.

5. Select the Security setting and press Enter.

6. Select the security settings for your network.

7. When you finished, select Complete and follow the on-screen instructions to save your settings and

exit the menus.

Parent topic: Wireless Network Projection

Setting Up Projector Network E-Mail Alerts

You can set up the projector to send you an e-mail alert over the network if there is a problem with the

projector.

1. Press the Menu button.

2. Select the Network menu and press Enter.

3. Select Network Configuration and press Enter.

4. Select the Notifications menu and press Enter.

5. Turn on Mail Notification.

6. Enter the IP address for the SMTP Server setting.

Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a

number from 0 to 255).

7. Select a number for the SMTP server Port Number setting, from 1 to 65535 (default is 25).

8. Enter the sender's email address as the From setting.

9. Choose an Address field, enter the e-mail address, and select the alerts you want to receive there.

Repeat for up to three addresses. Your e-mail address can be up to 32 alphanumeric characters

long.

10. If you are using the PJLink protocol for projector control, turn on the PJLink Notification setting and

enter the IP address where you want to receive PJLink notifications as the Notified IP Address

setting.

11. When you finish selecting settings, select Complete and follow the on-screen instructions to save

your settings and exit the menus.

Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.

Network Projector E-mail Alert Messages

Parent topic: Using the Projector on a Network

Network Projector E-mail Alert Messages

When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you

receive an e-mail containing the following information:

• The email address entered as the From setting

•Epson Projector on the subject line

• The name of the projector experiencing a problem

• The IP address of the affected projector

• Detailed information about the problem

Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.

Parent topic: Setting Up Projector Network E-Mail Alerts

Setting Up Monitoring Using SNMP

Network administrators can install SNMP (Simple Network Management Protocol) software on network

computers so they can monitor projectors. If your network uses this software, you can set up the

projector for SNMP monitoring.

1. Press the Menu button.

2. Select the Network menu and press Enter.

3. Select Network Configuration and press Enter.

4. Select the Notifications menu and press Enter.

5. Turn on the SNMP setting.

6. Enter up to two IP addresses to receive SNMP notifications as the Trap IP Address setting, using 0

to 255 for each address field.

Note: To enter the IP address using the numeric keys on the remote control, press and hold the

Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x

is a number from 0 to 255).

7. Select the Others menu and press Enter.

8. If you want to use the Secure HTTP protocol to encrypt communication when using Web Control,

turn on the Secure HTTP setting and import the web server certificate using the Web Server Cert.

setting.

9. If available, select the Priority Gateway setting for your network.

10. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to

allow the projector to be detected.

11. If your network environment uses a Crestron RoomView controller, turn on the Crestron RoomView

setting to allow the projector to be detected.

12. If you are using the projector with a Control 4 Simple Device Discovery Protocol (SDDP) automation

system, turn on the Control4 SDDP setting.

13. If you want this projector to receive broadcast messages over the network, turn on the Message

Broadcasting setting. Administrators can broadcast messages over the network using the Epson

Projector Management software.

14. When you finish selecting settings, select Complete and follow the on-screen instructions to save

your settings and exit the menus.

Parent topic: Using the Projector on a Network

Controlling a Networked Projector Using a Web Browser

Once you have connected your projector to your network, you can select projector settings and control

projection using a compatible web browser. This lets you access the projector remotely.

Note: The web setup and control features support Microsoft Internet Explorer 11.0 or later, Microsoft

Edge, Google Chrome, and Safari on networks that do not use a proxy server for connection. You

cannot select all of the projector menu settings or control all projector functions using a web browser.

Note: If you set Standby Mode to Communication On in the ECO menu, you can use a web browser to

select settings and control projection even if the projector is in standby mode.

1. Make sure the projector is turned on.

2. Start your web browser on a computer or device connected to the network.

3. Type the projector's IP address into the browser's address box and press the computer's Enter key.

Note: If you attempt to connect to the Web Control screen via a proxy server, the screen will not be

displayed. Make a direct connection to the Web Control screen.

You see the Web Control screen.

4. To control projection remotely, select the Basic Control option from the Web Control screen.

Note: If you see a log in window, enter your user name and password. (The default user name is

EPSONREMOTE and the default password is guest.)

You see a screen like this:

1 Power button control

2 Selects an HDMI port source

3 Selects a Video port source

4 Selects the USB Display source

5 Selects the network source

6A/V Mute button control

7Freeze button control

8Page Up and Page Down button controls

9 Displays a QR code for connecting with iOS or Android devices using the Epson iProjection

app

10 Displays closed captions

11 Volume button controls

12 Selects the USB device source

13 Selects the Computer port source

14 Searches for connected sources

5. Select the icon corresponding to the projector function you want to control.

6. To select projector menu settings, select Advanced on the Web Control screen.

Note: If you see a log in window, enter your user name and password. (The default user name is

EPSONWEB and the default password is admin.)

7. Select the name of the menu and follow the on-screen instructions.

Parent topic: Using the Projector on a Network

Crestron RoomView Support

If you are using the Crestron RoomView network monitoring and control system, you can set up your

projector for use on the system. Crestron RoomView lets you control and monitor your projector using a

web browser.

Note: You cannot use the Epson Web Control feature or the Message Broadcasting tool for Epson

Projector Management when you use Crestron RoomView.

For additional information on Crestron RoomView, contact Crestron.

Setting Up Crestron RoomView Support

Controlling a Networked Projector Using Crestron RoomView

Parent topic: Using the Projector on a Network

Setting Up Crestron RoomView Support

To set up your projector for monitoring and control using a Crestron RoomView system, make sure your

computer and projector are connected to the network. If you are connecting wirelessly, set up the

projector using the Advanced network connection mode.

Note: If you want to use the Crestron RoomView system when the projector is turned off, you need to

adjust the Standby Mode setting in the ECO menu.

1. Press the Menu button.

2. Select the Network menu and press Enter.

3. Select Network Configuration and press Enter.

4. Select the Others menu and press Enter.

5. Set the Crestron RoomView setting to On to allow the projector to be detected.

Note: Enabling Crestron RoomView disables the Epson Message Broadcasting feature in the Epson

Projector Management software.

6. When you finish selecting settings, select Complete and follow the on-screen instructions to save

your settings and exit the menus.

7. Turn off the projector, then turn it on again to enable the setting.

Parent topic: Crestron RoomView Support

Related references

Projector Setup Settings - ECO Menu

Controlling a Networked Projector Using Crestron RoomView

Once you have set up your projector to use Crestron RoomView, you can control and monitor projection

using a compatible web browser.

1. Start your web browser on a computer connected to the network.

2. Type the projector's IP address into the browser's address box and press the computer's Enter key.

You see this screen:

3. Select the input source that you want to control in the Sources List box. You can scroll through

available sources using the up and down arrows in the box.

4. To control projection remotely, click the on-screen buttons that correspond to the projector's remote

control buttons. You can scroll through button options at the bottom of the screen.

Note: These on-screen buttons do not directly correspond to the projector's remote control buttons:

•OK acts as the Enter button

•Menu displays the projector's menu

5. To view information about the projector, click the Info tab.

6. To change projector, Crestron, and password settings, click the Tools tab, select settings on the

displayed screen, and click Send.

7. When you finish selecting settings, click Exit to exit the program.

Parent topic: Crestron RoomView Support

Registering a Digital Certificate on the Projector

Follow the instructions here if you need to install a digital certificate on the projector to provide security

for your presentation files.

Note: You can register a digital certificate over a network. However, be sure to register just once or the

certificate may not install correctly.

Importing a Web Server Certificate Using the Projector Menus

Registering Digital Certificates from a Web Browser

Digital Certificate Types

Parent topic: Using the Projector on a Network

Importing a Web Server Certificate Using the Projector Menus

You can create your web server certificate and import it using the projector menus and a USB flash

drive.

Note: You can also register digital certificates from your web browser. Make sure to only register once,

or the certificate may not install correctly.

1. Make sure your digital certificate file is compatible with projector registration and saved in the root

directory of the USB flash drive.

2. Press the Menu button on the projector or remote control.

3. Select the Network menu and press Enter.

4. Select the Network Configuration setting and press Enter.

5. Select the Others menu and press Enter.

6. Select On as the Secure HTTP setting.

7. Select the Web Server Cert. setting and press Enter.

8. Select Register and press Enter.

9. Follow the on-screen instructions to connect a USB flash drive to the projector's USB-A port.

10. Press Enter to display the certificate list.

11. Select the certificate you want to import from the displayed list.

A message is displayed prompting you to enter the password for the certificate.

12. Enter the password and press Enter.

The certificate is imported and a completion message appears.

Parent topic: Registering a Digital Certificate on the Projector

Registering Digital Certificates from a Web Browser

You can register the digital certificates on the projector for wireless LAN authentication.

1. Make sure your digital certificate file is compatible with projector registration.

2. Make sure the projector is turned on.

3. Start your web browser on a computer or mobile device connected to the network.

4. Type the projector's IP address into the browser's address box and press the computer's Enter key.

You see the Web Control screen.

5. Select Advanced.

6. Enter the following information in uppercase or lowercase letters, exactly as shown:

• For the user ID, enter EPSONWEB. (You cannot change the user ID.)

• For the password, enter the default password admin. (You can change the Web Control password

using the projector's Network menu.)

7. Under Network, select the Certificate option.

You see a screen like this:

8. Select the certificate file you want to register.

9. Enter a password in the Password box, then click Send.

10. When you finish registering the certificate, click Apply to finalize your changes and complete the

registration.

Parent topic: Registering a Digital Certificate on the Projector

Digital Certificate Types

You can register these types of digital certificates.

Client Certificate (PEAP-TLS/EAP-TLS)

Specification Description

Format PKCS#12

Extension PFX/P12

Specification Description

Encryption RSA

Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512

Key length 512/1024/2048/4096 bit

Password Up to 32 alphanumeric characters; required

CA Certificate (PEAP/PEAP-TLS/EAP-TLS/EAP-FAST)

Specification Description

Format X509v3

Extension DER/CER/PEM

Encryption RSA

Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512

Key length 512/1024/2048/4096 bit

Encoding BASE64/Binary

Web Server Certificate (Secure HTTP)

Specification Description

Format PKCS#12

Extension PFX/P12

Encryption RSA

Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512

Key length 512/1024/2048/4096 bit

Common name Network host name

Organization Optional

Password Up to 32 alphanumeric characters; required

Parent topic: Registering a Digital Certificate on the Projector

Using Basic Projector Features

Follow the instructions in these sections to use your projector's basic features.

Turning On the Projector

Turning Off the Projector

Selecting the Language for the Projector Menus

Setting the Date and Time

Image Shape

Resizing the Image with the Wide and Tele Buttons

Adjusting the Image Position

Focusing the Image

Remote Control Operation

Selecting an Image Source

Projection Modes

Image Aspect Ratio

Color Mode

Adjusting the Projector's Brightness Level

Turning On Automatic Luminance Adjustment

Controlling the Volume with the Volume Buttons

Projecting a PC Free Presentation

Turning On the Projector

Turn on the computer or video equipment you want to use before you turn on the projector so it can

display the image source.

1. Connect the power cord to the projector's power inlet.

2. Plug the power cord into an electrical outlet.

The projector's On/Standby light turns blue. This indicates that the projector is receiving power.

Note: With Direct Power On turned on, the projector turns on as soon as you plug it in.

3. Press the power button on the projector or remote control to turn on the projector.

The projector beeps and the Status light flashes blue as the projector warms up. After about 30

seconds, the Status light stops flashing and turns blue.

Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is

especially dangerous for children and pets.

Caution: Make sure no objects are blocking the light from the projector lens. Objects blocking the

lens for an extended time can melt and light that is reflected back into the lens can cause the

projector to malfunction.

If you do not see a projected image right away, try the following:

• Turn on the connected computer or video device.

• Insert a DVD or other video media and press the play button, if necessary.

• Press the Source Search button on the projector or remote control to detect the video source.

Note: If the Auto Source Search setting in the Extended menu is enabled, the projector automatically

detects the input signal when you turn it on.

• Change the screen output from the computer when using a laptop.

• Press the button for the video source on the remote control.

• If the Home screen is displayed, select the source you want to project.

Using the Home Screen

Parent topic: Using Basic Projector Features

Related references

Projector Setup Settings - Extended Menu

Using the Home Screen

You can select input sources and other frequently used options from the Home screen.

1. To display the Home screen, do one of the following:

• Press the Home button on the control panel or remote control.

• Turn on the projector with the Home Screen Auto Disp setting enabled.

• Turn on the projector when no signal is received from the selected input source.

2. Press the arrow buttons on the remote control or control panel to navigate the screen, and press

Enter to select an option.

1 Selects the source you want to project

2 Displays a QR code for device connection

3 Displays the on-screen help

4 Hides the Home screen

5 Displays the interactive settings

6 Displays the current projector status when you change a Home screen using the interactive

pen or your finger

7 Displays the settings assigned to Home screen in the projector's Extended menu

8 Projects two images from different image sources simultaneously by splitting the projected

screen

9 Displays the brightness for the light source

Note: You can modify the customizable menu options using the Custom Setting L1 through

Custom Setting R3 settings in the Extended menu.

3. Press the Home button or press the icon to hide the Home screen.

Parent topic: Turning On the Projector

Turning Off the Projector

Before turning off the projector, shut down any computer connected to it so you can see the computer

display during shutdown.

Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary

depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.

1. Press the power button on the projector or remote control.

The projector displays a shutdown confirmation screen.

2. Press the power button again. (To leave it on, press any other button.)

The projector beeps twice, the laser turns off, and the Status light turns off.

Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the

projector for transport right away (if necessary).

Caution: Do not turn the projector on immediately after turning it off. Turning the projector on and off

frequently may shorten the life of the laser.

3. To transport or store the projector, make sure the Status light is off, then unplug the power cord.

Caution: To avoid damaging the projector or laser, never unplug the power cord when the Status

light is on or flashing.

Parent topic: Using Basic Projector Features

Related references

Projector Setup Settings - Extended Menu

Selecting the Language for the Projector Menus

If you want to view the projector's menus and messages in another language, you can change the

Language setting.

1. Turn on the projector.

2. Press the Menu button.

100

3. Select the Extended menu and press Enter.

4. Select the Language setting and press Enter.

5. Select the language you want to use and press Enter.

6. Press Menu or Esc to exit the menus.

Parent topic: Using Basic Projector Features

Setting the Date and Time

You can set the date and time for the projector.

1. Press the Menu button.

2. Select the Extended menu and press Enter.

3. Select the Operation setting and press Enter.

4. Select the Date & Time setting and press Enter.

101

You see a screen like this:

5. Select the Date & Time setting and press Enter.

6. Select your date and time settings. Then select Set and press Enter to confirm your changes.

7. When you are finished, press the Menu button to exit.

Parent topic: Using Basic Projector Features

Image Shape

You can project an evenly rectangular image by placing the projector directly in front of the center of the

screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off

to the side, you may need to correct the image shape for the best display quality.

Note: For interactive use, the image must be evenly rectangular, without distortion. Refer to the

Installation Guide for instructions on positioning the projector to achieve an evenly rectangular image.

Correcting Image Shape with the Keystone Buttons

Correcting Image Shape with Quick Corner

Correcting Image Shape with Arc Correction

Parent topic: Using Basic Projector Features

Correcting Image Shape with the Keystone Buttons

You can use the projector's keystone correction buttons to correct the shape of an image that is

unevenly rectangular on the sides.

102

Note: You can use the keystone buttons to correct the image up to ± 3° horizontally or vertically. Use the

adjustment dials on the wall mount to correct the screen image before using any other digital correction

methods.

Note: Using the keystone correction buttons may affect interactive pen and finger touch calibration.

1. Turn on the projector and display an image.

Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.

2. Press one of these keystone buttons on the control panel to display the Keystone adjustment

screen.

103

3. Press a keystone button on the projector's control panel to adjust the image shape.

Note: The horizontal keystone adjustment buttons are labeled Wand T.

After correction, your image is slightly smaller.

Note: If the projector is installed out of reach, you can also correct the image shape with the remote

control using the H/V-Keystone settings in the projector menus.

Parent topic: Image Shape

104

Related references

Projector Feature Settings - Settings Menu

Correcting Image Shape with Quick Corner

You can use the projector's Quick Corner setting to correct the shape and size of an image that is

unevenly rectangular on all sides.

Note: Use the adjustment dials on the wall mount to correct the screen image before using any other

digital correction methods.

1. Turn on the projector and display an image.

2. Press the Menu button.

3. Select the Settings menu and press Enter.

105

4. Select the Geometry Correction setting and press Enter.

5. Select the Quick Corner setting and press Enter. Then press Enter again.

You see the Quick Corner adjustment screen:

Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a

reset screen. Then select Yes.

6. Use the arrow buttons on the projector or remote control to select the corner of the image you want

to adjust. Then press Enter.

7. Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the area

selection screen.

8. When you are finished, press Esc.

Parent topic: Image Shape

Related references

Projector Feature Settings - Settings Menu

Correcting Image Shape with Arc Correction

You can use the projector's Arc Correction setting to adjust the curve or arc of the sides of your image.

Note: Use the adjustment dials on the wall mount to correct the screen image before using any other

digital correction methods.

106

Note: Adjusting the Arc Correction setting may affect interactive pen and finger touch calibration.

1. Turn on the projector and display an image.

Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.

2. Press the Menu button.

3. Select the Settings menu and press Enter.

4. Select the Geometry Correction setting and press Enter.

5. Select the Arc Correction setting and press Enter. Then select the Arc Correction setting and

press Enter again.

107

You see the Arc Correction adjustment screen:

Note: To reset your adjustments, press the Esc button for at least 2 seconds to display a reset

screen, and select Yes.

6. Use the arrow buttons on the projector or the remote control to select the corner or side of the image

you want to adjust. Then press Enter.

7. Press the arrow buttons to adjust the image shape as necessary.

8. When you are finished, press Esc.

9. To save your adjusted image position, select Save Memory and select an entry. You can save up to

three image positions.

Parent topic: Image Shape

Related references

Projector Feature Settings - Settings Menu

Resizing the Image with the Wide and Tele Buttons

You can resize the image using the Wide and Tele buttons.

1. Turn on the projector and display an image.

2. To enlarge the image size, press the W(Wide) button on the projector's control panel.

108

3. To reduce the image size, press the T(Tele) button.

After you adjust the image size, the Image Shift screen is displayed automatically for adjusting the

image position.

Note: If the projector is installed out of reach, you can also adjust the image size with the remote

control using the Zoom setting in the projector menus.

Parent topic: Using Basic Projector Features

Related references

Projector Feature Settings - Settings Menu

Adjusting the Image Position

You can use the Image Shift feature to adjust the image position without moving the projector.

Note: This feature is not available if the Zoom option is set to the widest setting.

109

1. Turn on the projector and display an image.

2. Adjust the image size using the W(Wide) and T(Tele) buttons.

After you adjust the image size, the Image Shift screen is displayed automatically.

3. Use the arrow buttons on the projector or remote control to adjust the image position.

Note: You can also use the Settings menu to adjust the Image Shift setting.

Parent topic: Using Basic Projector Features

Related references

Projector Feature Settings - Settings Menu

Focusing the Image

1. Turn on the projector and display an image.

Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.

110

2. Slide the air filter cover latch and open the air filter cover.

3. Raise or lower the focus lever to sharpen the image.

Parent topic: Using Basic Projector Features

Related references

Projector Feature Settings - Settings Menu

111

Remote Control Operation

The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m)

away. You can point it at the screen or board, or the front or back of the projector.

Make sure that you aim the remote control at the projector's receivers within the angles listed here.

1 19.7 feet (6 m)

2 ± 30°

3 ± 55°

4 60°

5 15°

Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or

the projector may not respond to commands. If you will not use the remote control for a long time,

remove the batteries.

Using the Remote Control as a Wireless Mouse

112

Using the Remote Control as a Pointer

Parent topic: Using Basic Projector Features

Using the Remote Control as a Wireless Mouse

You can use the projector's remote control as a wireless mouse so you can control projection at a

distance from the computer. The computer must be running Windows Vista or later, OS X 10.7 or later,

macOS 10.12.x, or macOS 10.13.x.

Note: You cannot use this feature at the same time as the interactive pens. If you want to use the remote

control as a wireless mouse, you need to change the USB Type B setting in the projector's Extended

menu.

1. Connect the projector to a computer using the projector's USB-B,Computer, or HDMI port to

display video.

Note: You cannot use the wireless mouse feature with an MHL connection.

2. If you connected your computer to a port other than the projector's USB-B port, also connect a USB

cable to the projector's USB-B port and to a USB port on your computer (for wireless mouse

support).

3. Start your presentation.

4. Use the following buttons on the remote control to control your presentation:

• To move through slides or pages, press the up or down Page buttons.

• To move the cursor on the screen, use the arrow buttons.

113

• To left-click, press the button once (press it twice to double-click).

• To right-click, press the Esc button.

• To drag-and-drop, hold the button as you move the cursor with the arrow buttons, then release

the button at the destination.

Note: If the mouse button settings are set to reverse on the computer, the remote control buttons will

also be reversed.

Parent topic: Remote Control Operation

Related references

Projector Setup Settings - Extended Menu

Using the Remote Control as a Pointer

You can use the projector's remote control as a pointer to help you call out important information on the

screen. The default pointer shape is an arrow, but you can select an alternative shape using the Settings

menu.

1. Press the Pointer button on the remote control.

2. Use the arrow buttons on the remote control to move the pointer on the screen.

114

3. Press the Esc or Pointer button to clear the pointer from the screen.

Parent topic: Remote Control Operation

Related references

Projector Feature Settings - Settings Menu

Selecting an Image Source

If you connected multiple image sources to the projector, such as a computer and DVD player, you may

want to switch from one image source to the other.

1. Make sure the connected image source you want to use is turned on.

2. For video image sources, insert a DVD or other video media and press its play button, if necessary.

3. Do one of the following:

• Press the Source Search button on the projector or remote control until you see the image from

the source you want.

115

• Press the button for the source you want on the remote control. If there is more than one port for

that source, press the button again to cycle through the sources.

1 Computer port source (Computer port)

2 Video, HDMI, and MHL sources (Video,HDMI 1/MHL,HDMI 2 and HDMI 3 ports)

3 USB port sources (USB-B port and external devices connected to the USB-A ports)

4 Network source (LAN)

• Press the Home button on the remote control and select your image source.

116

Parent topic: Using Basic Projector Features

Related references

Projector Setup Settings - Extended Menu

Related tasks

Using the Home Screen

Projection Modes

Depending on how you positioned the projector, you may need to change the projection mode so your

images project correctly.

•Front lets you project from a table in front of the screen.

•Front/Upside Down flips the image over top-to-bottom to project upside-down from a wall or ceiling

mount. Also use this mode when you mount the projector vertically on a table to create an interactive

work surface.

•Rear flips the image horizontally to project from behind a translucent screen.

•Rear/Upside Down flips the image over top-to-bottom and horizontally to project from the wall or

ceiling and behind a translucent screen.

Note: The two Rear projection modes cannot be used with the interactive features.

You can change the projection mode using the remote control or by changing the Projection setting in

the Extended menu.

Changing the Projection Mode Using the Remote Control

Changing the Projection Mode Using the Menus

Parent topic: Using Basic Projector Features

Changing the Projection Mode Using the Remote Control

You can change the projection mode to flip the image over top-to-bottom.

1. Turn on the projector and display an image.

117

2. Hold down the A/V Mute button on the remote control for 5 to 10 seconds.

The image disappears briefly and reappears flipped top-to-bottom.

3. To change projection back to the original mode, hold down the A/V Mute button for 5 to 10 seconds

again.

Parent topic: Projection Modes

Changing the Projection Mode Using the Menus

You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the

projector menus.

1. Turn on the projector and display an image.

2. Press the Menu button.

3. Select the Extended menu and press Enter.

4. Select the Projection setting and press Enter.

118

5. Select a projection mode and press Enter.

6. Press Menu or Esc to exit the menus.

Parent topic: Projection Modes

Image Aspect Ratio

The projector can display images in different width-to-height ratios called aspect ratios. Normally the

input signal from your video source determines the image's aspect ratio. However, for certain images

you can change the aspect ratio to fit your screen by pressing a button on the remote control.

If you always want to use a particular aspect ratio for a certain video input source, you can select it using

the projector's menus.

Changing the Image Aspect Ratio

Available Image Aspect Ratios

Parent topic: Using Basic Projector Features

Changing the Image Aspect Ratio

You can change the aspect ratio of the displayed image to resize it.

1. Turn on the projector and switch to the image source you want to use.

2. Press the Aspect button on the remote control.

The shape and size of the displayed image changes, and the name of the aspect ratio appears

briefly on the screen.

119

3. To cycle through the available aspect ratios for your input signal, press the Aspect button

repeatedly.

Note: To remove black bars when projecting from a computer, set the Resolution setting to Wide or

Normal in the Signal menu, depending on your computer's resolution.

Parent topic: Image Aspect Ratio

Related references

Input Signal Settings - Signal Menu

Available Image Aspect Ratios

You can select the following image aspect ratios, depending on the input signal from your image source.

Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect

ratio and resolution of your input signal.

Aspect ratio setting Description

Auto Automatically sets the aspect ratio according to the input signal and

the Resolution setting.

Normal Displays images using the full projection area and maintains the

aspect ratio of the image.

16:9 Converts the aspect ratio of the image to 16:9.

Full Displays images using the full width of the projection area, but does

not maintain the aspect ratio.

Zoom Displays images using the full width of the projection area and

maintains the aspect ratio of the image.

Native Displays images as is (aspect ratio and resolution are maintained).

Note: The Auto aspect ratio setting is available only for HDMI image sources.

Parent topic: Image Aspect Ratio

120

Color Mode

The projector offers different Color Modes to provide optimum brightness, contrast, and color for a

variety of viewing environments and image types. You can select a mode designed to match your image

and environment, or experiment with the available modes.

If you always want to use a particular color mode for a certain video input source, you can select it using

the projector menus.

Changing the Color Mode

Available Color Modes

Parent topic: Using Basic Projector Features

Changing the Color Mode

You can change the projector's Color Mode using the remote control to optimize the image for your

viewing environment.

1. Turn on the projector and switch to the image source you want to use.

2. If you are projecting from a DVD player or other video source, insert a disc or other video media and

press the play button, if necessary.

3. Press the Color Mode button on the remote control to change the Color Mode.

The image appearance changes and the name of the Color Mode appears briefly on the screen.

4. To cycle through all the available Color Modes for your input signal, press the Color Mode button

repeatedly.

Parent topic: Color Mode

Available Color Modes

You can set the projector to use these Color Modes, depending on the input source you are using:

121

Color Mode Description

Dynamic Best for video games in a bright room

Presentation Best for color presentations in a bright room

Cinema Best for movies projected in a dark room with natural tone images

sRGB Best for standard sRGB computer displays

Blackboard Best for projecting images directly onto a green chalkboard

Parent topic: Color Mode

Adjusting the Projector's Brightness Level

You can adjust the brightness of your projector's light source.

1. Turn on the projector and switch to the image source you want to use.

2. Press the Menu button.

3. Select the ECO menu and press Enter.

122

4. Select Brightness Settings and press Enter.

5. Select Light Source Mode and press Enter.

Note: If you have set Multi-Projection to On, you cannot change the Light Source Mode setting.

6. Select one of the following options:

•Auto: Sets brightness automatically (available when you install the projector upside down)

•Normal: Sets brightness to the maximum level (ideal for conference rooms, auditoriums, and

lecture halls)

•Quiet: Sets brightness to 70% and reduces fan noise (ideal for libraries, theaters, museums, and

art galleries)

•Extended: Sets brightness to 70% and extends the life expectancy of the light source (ideal for

darker environments with ambient light, such as museums and art galleries, where a reduced

maintenance cycle is desired)

•Custom: Allows you to select a custom brightness level between 70 to 100%

7. If you selected Custom, select Brightness Level from the Brightness Settings screen and use the

left and right arrow buttons to select the brightness.

123

8. If you selected Custom and want to maintain consistent brightness, turn on the Constant

Brightness setting.

Note: If you turn on Constant Brightness, you cannot change the Light Source Mode and

Brightness Level settings. If you turn off Constant Brightness, the Brightness Level setting

changes according to the status of the light source.

9. Press Menu or Esc to return to the previous screen.

Note: If you use the projector continuously for more than 24 hours, or regularly turn it off by shutting

off the power outlet, schedule periodic Light Source Calibration events from the Extended menu.

Otherwise, the Constant Brightness setting may not work properly.

Constant Brightness Usage Hours

Parent topic: Using Basic Projector Features

Related references

Projector Setup Settings - Extended Menu

Constant Brightness Usage Hours

If you turn on the Constant Brightness setting, the number of hours the projector can maintain constant

brightness is displayed as the Estimated Remains setting.

124

Display level Estimated remaining hours

10000 or more hours

8000 to 9999 hours

6000 to 7999 hours

4000 to 5999 hours

2000 to 3999 hours

0 to 1999 hours

Light source life span

The estimated life span of the light source varies depending on the Brightness Level setting and

whether the Constant Brightness setting is on or off.

Constant Brightness off

1 Brightness level

2 Time before the brightness of the light source is reduced by half (approximate)

Brightness Level setting Hours

100% 20000 hours

90% 21000 hours

80% 24000 hours

70% 30000 hours

Constant Brightness on

125

1 Brightness level

2 Time the projector can maintain constant brightness (approximate)

Brightness Level setting Hours

85% 6000 hours

80% 10000 hours

70% 19000 hours

Note: The light source usage hours vary depending upon environmental conditions and usage. The

hours listed here are an approximate and are not guaranteed. After 20000 hours of use, you may need to

replace parts in the projector. If Constant Brightness is turned on, and you have exceeded the usage

hours listed here, you may not be able to select a high Brightness Level setting.

Parent topic: Adjusting the Projector's Brightness Level

Turning On Automatic Luminance Adjustment

In the Dynamic and Cinema color modes, you can turn on the Dynamic Contrast setting to

automatically optimize the image luminance. This improves the image contrast based on the brightness

of the content you project.

1. Turn on the projector and switch to the image source you want to use.

2. Press the Menu button.

126

3. Select the Image menu and press Enter.

4. Select the Dynamic Contrast setting, choose one of the following options, and press Enter:

•Normal to adjust brightness at the standard speed.

•High Speed to adjust brightness as soon as the scene changes.

5. Press Menu or Esc to exit the menus.

Parent topic: Using Basic Projector Features

Related references

Projector Setup Settings - Extended Menu

Controlling the Volume with the Volume Buttons

You can use the Volume buttons on the remote control or projector to adjust the volume as you project a

presentation with audio. The volume buttons control the projector’s internal speaker system or any

external speakers you connected to the projector.

You must adjust the volume separately for each connected input source.

1. Turn on the projector and start a presentation that includes audio.

127

2. To lower or raise the volume, press the Volume buttons on the remote control.

A volume gauge appears on the screen.

3. To set the volume to a specific level for an input source, use the projector menus.

Parent topic: Using Basic Projector Features

Projecting a PC Free Presentation

You can use your projector's PC Free feature whenever you connect a USB device that contains

compatible files. This lets you quickly and easily display the contents of the files and control their display

using the projector's remote control.

Supported PC Free File Types

Starting a PC Free Slide Show

Starting a PC Free Movie Presentation

PC Free Display Options

Parent topic: Using Basic Projector Features

Supported PC Free File Types

You can project these types of files using the projector's PC Free feature.

Note: For best results, place your files on media that is formatted in FAT16/32. If you have trouble

projecting from media formatted for non-Windows file systems, try formatting the media for Windows

instead. You may not be able to use the security features on certain USB storage devices with PC Free

features. When connecting a USB-compatible hard drive, connect the AC adapter supplied with the

drive. PC Free may not work with USB device security features.

128

File type and

extension

Details

Image (.jpg) Make sure the file is not:

• CMYK format

• Progressive format

• Highly compressed

• Above 8192 × 8192 resolution

Image (.bmp) Make sure the file resolution is not above 1280 × 800

Image (.gif ) Make sure the file is not:

• Above 1280 × 800 resolution

• Animated

Image (.webp) Make sure the file resolution is not:

• Above 1920 × 1200

Motion JPEG

movie (.avi)

Supports only AVI 1.0

Make sure the file is not:

• Saved with an audio codec other than PCM or ADPCM

• Above 1280 × 720 resolution

• Larger than 2GB

Parent topic: Projecting a PC Free Presentation

Starting a PC Free Slide Show

After connecting a USB device or digital camera to the projector, you can switch to the USB input source

and start your slide show.

Note: You can change the PC Free operation options or add special effects by highlighting Option at the

bottom of the screen and pressing Enter.

Note: You can also use the interactive pen or your finger to operate the slide show.

1. Press the Source Search button on the projector or remote control.

129

2. Select the USB1 source.

The PC Free screen appears.

Note: If the Select Drive screen appears, press the arrow buttons to select the drive and press

Enter.

3. Do the following as necessary to locate your files:

• If you need to display files inside a subfolder on your device, press the arrow buttons to highlight

the folder and press the Enter button.

• To move back up a folder level on your device, highlight Back to Top and press Enter.

• To view additional files in a folder, highlight Next page or Previous page and press Enter. (You

can also press the Page up or down buttons on the remote control.)

• To display images from a different USB drive, select Select Drive at the top of the PC Free screen

and press Enter.

4. Do one of the following:

• To display an individual image, press the arrow buttons to highlight the image and press Enter.

(Press the Esc button to return to the file list screen.)

130

• To display a slide show of all the images in a folder, press the arrow buttons to highlight the

Slideshow option at the bottom of the screen and press Enter.

Note: If any file names are longer than 8 characters or include unsupported symbols, the file names

may be shortened or changed only in the screen display.

5. While projecting, use the following commands to control the display as necessary:

• To rotate a displayed image, press the up or down arrow button. You can also rotate the image by

flicking it with the interactive pen or your finger.

• To move to the next or previous image, press the left or right arrow button. You can also move

between images by flicking the image with the interactive pen or your finger.

6. To stop the display, follow the on-screen instructions or press the Esc button.

7. Turn off the USB device, if necessary, and then disconnect the device from the projector.

Parent topic: Projecting a PC Free Presentation

Starting a PC Free Movie Presentation

After connecting a USB device or digital camera to the projector, you can switch to the USB input source

and start your movie.

Note: You can change the PC Free operation options by highlighting Option at the bottom of the screen

and pressing Enter.

1. Press the Source Search button on the projector or remote control.

2. Select the USB1 source.

131

The PC Free screen appears.

Note: If the Select Drive screen appears, press the arrow buttons to select the drive and press

Enter.

3. Do the following as necessary to locate your files:

• If you need to display files inside a subfolder on your device, press the arrow buttons to highlight

the folder and press the Enter button.

• To move back up a folder level on your device, highlight Back to Top and press Enter.

• To view additional files in a folder, highlight Next page or Previous page and press Enter. (You

can also press the Page up or down buttons on the remote control.)

• To display movie files from a different USB drive, select Select Drive at the top of the PC Free

screen and press Enter.

4. To play back a movie, press the arrow buttons to highlight the file and press Enter.

Note: If any file names are longer than 8 characters or include unsupported symbols, the file names

may be shortened or changed only in the screen display. If you want to play back all the movies in a

folder in sequence, select the Slideshow option at the bottom of the screen.

132

5. To stop movie playback, press the Esc button, highlight Exit, and press Enter.

6. Turn off the USB device, if necessary, and then disconnect the device from the projector.

Parent topic: Projecting a PC Free Presentation

PC Free Display Options

You can select these display options when using the projector's PC Free feature.

Setting Options Description

Display Order Name Order Displays files in name order

Date Order Displays files in date order

Sort Order In Ascending Sorts files in first-to-last order

In Descending Sorts files in last-to-first order

Continuous Play On Displays a slide show continuously

Off Displays a slide show one time through

Screen Switching

Time

No Does not display the next file automatically

1 Second to 60 Seconds Displays files for the selected time and

switches to the next file automatically; high

resolution images may switch at a slightly

slower rate

133

Setting Options Description

Effect No No effect

Wipe Transitions between images with a wipe effect

Dissolve Transitions between images with a dissolve

effect

Random Transitions between images using a random

variety of effects

Parent topic: Projecting a PC Free Presentation

134

Adjusting Projector Features

Follow the instructions in these sections to use your projector's feature adjustments.

Projecting Two Images Simultaneously

Using Multiple Projectors (DuoLink)

Shutting Off the Picture and Sound Temporarily

Stopping Video Action Temporarily

Zooming Into and Out of Images

Projector Security Features

Creating a User Pattern to Display

Copying Menu Settings Between Projectors

135

Projecting Two Images Simultaneously

You can use the split screen feature to simultaneously project two images from different image sources

next to each other. You can control the split screen feature using the remote control or the projector

menus.

Note: While you use the split screen feature, other projector features may not be available and some

settings may be automatically applied to both images.

Note: You cannot use split screen with certain input source combinations. You cannot perform split

screen projection when the Connect ELPCB02 setting is set to On in the Extended menu.

136

1. Press the Split button on the remote control.

The currently selected input source moves to the left side of the screen.

2. Press the Menu button.

You see this screen:

3. To select an input source for the other image, select the Source setting, press Enter, select the

input source, select Execute, and press Enter. (You can also change image sources, if necessary.)

4. To switch the images, select the Swap Screens setting and press Enter.

5. To change the image sizes, select the Screen Size setting, press Enter, select a sizing option,

press Enter, and press Menu to exit.

Note: Depending on the video input signals, the images may not appear at the same size even if you

choose the Equal setting.

137

6. To choose the audio you want to hear, select the Audio Source setting, press Enter, select an

audio option, press Enter, and press Menu to exit.

7. To align the projected images, select the Align setting, press Enter, select the setting, press Enter,

and press Menu to exit.

8. To exit the split screen feature, press the Split or Esc button.

Input Sources for Split Screen Projection

Parent topic: Adjusting Projector Features

Input Sources for Split Screen Projection

You can choose from the input source combinations listed here for split screen projection.

Left Screen Right Screen

HDMI1/

MHL

HDMI2 HDMI3 Computer Video USB

Display

USB1 USB2 LAN

HDMI1/MHL —

HDMI2 —

HDMI3 —

Computer — —

Video — —

USB Display — — — —

USB1 — — — —

USB2 — — — —

LAN — — — —

Parent topic: Projecting Two Images Simultaneously

Using Multiple Projectors (DuoLink)

You can combine the projected images from two or more projectors to create one large image. Follow

the instructions in these sections to set up and project from multiple projectors.

Note: See the online DuoLink Setup Guide for additional information.

138

Projector Identification System for Multiple Projector Control

Adjusting Color Uniformity

Matching the Image Colors

Adjusting RGBCMY

Parent topic: Adjusting Projector Features

Projector Identification System for Multiple Projector Control

You can operate multiple projectors using one remote control for more elaborate presentations. To do

this, you assign an identification number to each projector and to the remote control. Then you can

operate all the projectors at once or individually.

Setting the Projector ID

Setting the Remote Control ID

Parent topic: Using Multiple Projectors (DuoLink)

Setting the Projector ID

If you want to control multiple projectors from a remote control, give each projector a unique ID.

1. Press the Menu button.

2. Select the Extended menu and press Enter.

3. Select the Multi-Projection setting and press Enter.

4. Select Projector ID and press Enter.

139

5. Press the arrow buttons on the remote control to select the identification number you want to use for

the projector. Then press Enter.

Repeat these steps for all the other projectors you want to operate from one remote control.

Note: If you don't know the projector's ID, aim the remote control at the projector and press the ID button

to temporarily display the projector's ID on the screen.

Parent topic: Projector Identification System for Multiple Projector Control

Setting the Remote Control ID

The remote control's ID is set to zero by default so it can operate any compatible projector. If you want to

set the remote control to operate only a particular projector, you need to set the remote control's ID to

match the projector's ID.

Note: You must set the remote control ID to match the projector ID each time you turn on the projector

you have set it to control.

1. Turn on the projector you want the remote control to operate with exclusively.

2. Make sure you know the projector's ID number as set in the Extended menu Projector ID setting.

Note: If you have forgotten the projector's ID, aim the remote control at the projector and press the

ID button to temporarily display the projector's ID on the screen. If you turn off the Projector ID

setting, the remote control will operate the projector regardless of the ID selected on the remote.

3. Aim the remote control at that projector.

4. Hold down the ID button on the remote control while you press the numeric button that matches the

projector's ID. Then release the buttons.

140

5. Press the ID button on the remote control to check if the ID-setting process worked.

You see a message displayed by the projector.

• If the remote control is listed as On, the remote control ID is set to operate only the listed projector.

• If the remote control is listed as Off, the remote control ID is not set properly. Repeat the steps

above to set the ID to match the projector you want to control.

Parent topic: Projector Identification System for Multiple Projector Control

Adjusting Color Uniformity

If the color tone is uneven on each screen, adjust the color tone balance in the Extended menu of each

projector. (The color tone may not be uniform even after performing color uniformity.)

Note: If you cannot adjust color uniformity, make sure the Color Mode setting is not set to Dynamic.

(The Color Mode for both projectors should be set to Presentation.)

1. Press the Menu button on the remote or control panel, select the Extended menu, and press Enter.

141

2. Select the Multi-Projection setting and press Enter.

3. Select the Color Uniformity setting and press Enter.

4. Select On as the Color Uniformity setting and press Enter, then press Esc.

5. Select Adjustment Level and press Enter.

6. Select an adjustment level and press Esc.

7. Select Start Adjustments and press Enter.

142

8. Select the area you want to adjust and press Enter.

9. Select Red,Green, or Blue and press the left arrow button to weaken the color tone or the right

arrow button to strengthen the color tone.

Note: The adjustment screen changes each time you press Enter.

10. Press Esc to return to the area selection screen.

11. Repeat steps 8 through 10 for each area, then select All to adjust the entire screen.

12. Press Esc to exit the menus.

Parent topic: Using Multiple Projectors (DuoLink)

Matching the Image Colors

You can match the display color of multiple projectors that will project next to one another.

1. Press the Menu button.

143

2. Select the Extended menu and press Enter.

3. Select the Multi-Projection setting and press Enter.

4. Select the Color Matching setting and press Enter.

144

You see this screen:

5. Press the left or right arrow buttons to select a value for the Adjustment Level setting.

Note: There are several adjustment levels and you can adjust each level individually.

6. Press the left or right arrow buttons to adjust the color tone for the Red,Green, and Blue settings.

7. Press the left or right arrow buttons to adjust the Brightness setting.

8. Repeat the previous three steps as necessary to adjust each adjustment level.

Parent topic: Using Multiple Projectors (DuoLink)

Adjusting RGBCMY

You can adjust the Hue,Saturation, and Brightness settings for R (red), G (green), B (blue), C (cyan),

M (magenta), and Y (yellow) color components.

Turn on all the projectors and select the RGBCMY setting in each projector's Extended menu so that the

color tone on the combined screen becomes entirely even.

1. Press the Menu button.

145

2. Select the Extended menu and press Enter.

3. Select the Multi-Projection setting and press Enter.

146

4. Select the RGBCMY setting and press Enter.

5. Select the color you want to adjust and press Enter.

You see this screen:

• To adjust the overall hue of the color, adjust the Hue setting.

• To adjust the overall vividness of the color, adjust the Saturation setting.

• To adjust the overall brightness of the color, adjust the Brightness setting.

6. Press the left or right arrow buttons to adjust the Hue,Saturation, and Brightness settings.

7. Repeat the previous three steps as necessary to adjust each color.

8. Press Menu or Esc to exit the menus.

Parent topic: Using Multiple Projectors (DuoLink)

147

Shutting Off the Picture and Sound Temporarily

You can temporarily turn off the projected picture and sound if you want to redirect your audience's

attention during a presentation. Any sound or video action continues to run, however, so you cannot

resume projection at the point that you stopped it.

If you want to display an image such as a company logo or picture when the presentation is stopped, you

can set up this feature using the projector's menus.

1. Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound.

2. To turn the picture and sound back on, press A/V Mute again.

Note: The projector's power automatically turns off thirty minutes after A/V Mute is enabled. You can

disable this feature in the projector's ECO menu.

Parent topic: Adjusting Projector Features

Related tasks

Saving a User's Logo Image to Display

Stopping Video Action Temporarily

You can temporarily stop the action in a video or computer presentation and keep the current image on

the screen. Any sound or video action continues to run, however, so you cannot resume projection at the

point that you stopped it.

Note: You can also stop video action using the interactive pens.

148

1. Press the Freeze button on the remote control to stop the video action.

2. To restart the video action in progress, press Freeze again.

Parent topic: Adjusting Projector Features

Zooming Into and Out of Images

You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it

on the screen.

Note: You can also zoom into your image using the interactive pens.

1. Press the E-Zoom + button on the remote control.

149

You see a crosshair on the screen indicating the center of the zoom area.

2. Use the following buttons on the remote control to adjust the zoomed image:

• Use the arrow buttons to position the crosshair in the image area you want to zoom into.

• Press the E-Zoom + button repeatedly to zoom into the image area, enlarging it as necessary.

Press and hold the E-Zoom + button to zoom in more quickly.

• To pan around the zoomed image area, use the arrow buttons.

• To zoom out of the image, press the E-Zoom – button as necessary.

• To return to the original image size, press Esc.

Parent topic: Adjusting Projector Features

Projector Security Features

You can secure your projector to deter theft or prevent unintended use by setting up the following

security features:

• Password security to prevent the projector from being turned on, and prevent changes to the startup

screen and other settings.

• Button lock security to block operation of the projector using the buttons on the control panel.

• Security cabling to physically cable the projector in place.

Password Security Types

Locking the Projector's Buttons

Installing a Security Cable

Parent topic: Adjusting Projector Features

Password Security Types

You can set up these types of password security using one shared password:

•Power On Protection password prevents anyone from using the projector without first entering a

password.

•User's Logo Protection password prevents anyone from changing the custom screen the projector

can display when it turns on. The presence of the custom screen discourages theft by identifying the

projector’s owner.

•Network Protection password prevents anyone from changing the network settings in the projector

menus.

150

Setting a Password

Selecting Password Security Types

Entering a Password to Use the Projector

Saving a User's Logo Image to Display

Parent topic: Projector Security Features

Setting a Password

To use password security, you must set a password.

Note: The default password is set to 0000.

1. Hold down the Freeze button on the remote control for about five seconds or until you see this

menu.

2. Press the down arrow to select Password and press Enter.

You see the prompt "Change the password?".

3. Select Yes and press Enter.

151

4. Press and hold down the Num button on the remote control and use the numeric buttons to set a

four-digit password.

The password displays as **** as you enter it. Then you see the confirmation prompt.

5. Enter the password again.

You see the message "Password accepted."

6. Press Esc to return to the menu.

7. Make a note of the password and keep it in a safe place in case you forget it.

Parent topic: Password Security Types

Selecting Password Security Types

After setting a password, you see this menu, allowing you to select the password security types you want

to use.

152

If you do not see this menu, hold down the Freeze button on the remote control for about five seconds or

until the menu appears.

• To prevent unauthorized use of the projector, select Power On Protection, press Enter, select On,

press Enter again, and press Esc.

• To prevent changes to the User's Logo screen or related display settings, select User's Logo

Protection, press Enter, select On, press Enter again, and press Esc.

• To prevent changes to network settings, select Network Protection, press Enter, select On, press

Enter again, and press Esc.

You can attach the Password Protect sticker to the projector as an additional theft deterrent.

Note: Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the

password required to use the projector.

Parent topic: Password Security Types

Entering a Password to Use the Projector

If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a

password whenever you turn on the projector.

You must enter the correct password to use the projector.

153

1. Press and hold down the Num button on the remote control while you enter the password using the

numeric buttons.

Note: The default password is 0000.

The password screen closes.

2. If the password is incorrect, the following may happen:

• You see a "wrong password" message and a prompt to try again. Enter the correct password to

proceed.

• If you have forgotten the password, make note of the Request Code: xxxxx number that appears

on the screen and contact Epson Support.

• If you enter an incorrect password three times in succession, you see a message telling you that

the projector is locked. After the message is displayed for 5 minutes, the projector enters standby

mode. Unplug the projector, plug in the power cord, and turn on the projector. You see a prompt to

enter the password.

• If you continue to enter an incorrect password many times in succession, the projector displays a

request code and a message to contact Epson Support. Do not attempt to enter the password

again. When you contact Epson Support, provide the displayed request code and proof of

ownership for assistance in unlocking the projector.

Parent topic: Password Security Types

Related references

Where to Get Help

154

Saving a User's Logo Image to Display

You can transfer an image to the projector and then display it whenever the projector turns on. You can

also display the image when the projector is not receiving an input signal or when you temporarily stop

projection. This transferred image is called the User's Logo screen.

The image you select as the User's Logo can be a photo, graphic, or company logo, which is useful in

identifying the projector's owner to help deter theft. You can prevent changes to the User's Logo by

setting up password protection for it.

Note: When you copy the menu settings from one projector to another using the batch setup feature, the

user logo is also copied. Do not include any information in the user logo that you do not want to share

between multiple projectors.

1. Display the image you want to project as the User's Logo.

2. Press the Menu button, select the Extended menu, and press Enter.

3. Select the User's Logo setting and press Enter.

You see a prompt asking if you want to use the displayed image as a user's logo.

4. Select Yes and press Enter.

You see a selection box overlaying your image.

Note: When you select User's Logo, adjustments such as Keystone,E-Zoom, or Aspect are

temporarily canceled.

155

5. Use the arrow buttons on the remote control to surround the image area you want to use as the

User's Logo and press Enter.

You see a prompt asking if you want to select this image area.

6. Select Yes and press Enter. (If you want to change the selected area, select No, press Enter, and

repeat the last step.)

You see the User's Logo zoom factor menu.

7. Select a zoom percentage and press Enter.

You see a prompt asking if you want to save the image as the User's Logo.

8. Select Yes and press Enter.

You see a completion message.

9. Press Esc to exit the message screen.

10. Select the Extended menu and press Enter.

11. Select Display and press Enter.

12. Select when you want to display the User's Logo screen:

• To display it whenever there is no input signal, select Display Background and set it to Logo.

• To display it whenever you turn the projector on, select Startup Screen and set it to On.

To prevent anyone from changing the User's Logo settings without first entering a password, set a

password and enable User's Logo security.

Parent topic: Password Security Types

Related tasks

Setting a Password

Selecting Password Security Types

156

Locking the Projector's Buttons

You can lock the buttons on the projector's control panel to prevent anyone from using the projector. You

can lock all the buttons or all the buttons except the power button.

Note: The projector can still be operated using the remote control.

1. Press the Menu button.

2. Select the Settings menu and press Enter.

3. Select Lock Setting and press Enter.

4. Select the Control Panel Lock setting and press Enter.

5. Select one of these lock types and press Enter:

• To lock all of the projector's buttons, select Full Lock.

• To lock all buttons except the power button, select Partial Lock.

You see a confirmation prompt.

6. Select Yes and press Enter.

Unlocking the Projector's Buttons

Parent topic: Projector Security Features

157

Unlocking the Projector's Buttons

If the projector's buttons have been locked, hold the Enter button on the projector's control panel for

seven seconds to unlock them. You can also set the Control Panel Lock setting to Off in the Settings

menu.

Parent topic: Locking the Projector's Buttons

Related references

Projector Feature Settings - Settings Menu

Installing a Security Cable

You can install two types of security cables on the projector to deter theft.

• Use the security slot on the projector to attach a Kensington lock. See your local computer or

electronics dealer for purchase information.

• Use the security cable attachment point on the projector to attach a wire cable and secure it to a room

fixture or heavy furniture.

Note: Do not pass drop-prevention cables through the security cable attachment point when mounting

the projector on a wall or ceiling.

Parent topic: Projector Security Features

Creating a User Pattern to Display

You can transfer an image to the projector and then display it as a pattern to aid in presentations when

you use the Pattern Display feature. This transferred image is called the User Pattern.

158

Note: Once you save a user pattern, you cannot restore the default pattern.

1. Display the image you want to project as the User Pattern from a connected computer or video

source.

2. Press the Menu button, select the Settings menu, and press Enter.

3. Select the Pattern setting and press Enter.

4. Select the User Pattern setting and press Enter.

You see a prompt asking if you want to use the displayed image as a User Pattern.

Note: When you select User Pattern, adjustments such as Keystone,E-Zoom,Aspect,Adjust

Zoom, or Image Shift are temporarily canceled.

5. Select Yes and press Enter.

Note: It takes a few moments for the projector to save the image; do not use the projector, its remote

control, or any connected equipment until it is finished.

You see a completion message.

6. Press Esc to exit the message screen.

Parent topic: Adjusting Projector Features

159

Copying Menu Settings Between Projectors

After you select menu settings for your projector, you can transfer them to another projector of the same

model.

Note: Copy the projector's settings before you adjust the projected image using the projector's Geometry

Correction settings. Any saved User's Logo setting on the projector will transfer to the other projector.

Caution: If the copy process fails due to a power failure, communication error, or for any other reason,

Epson will not be responsible for any repair costs incurred.

The following settings will not transfer between projectors:

• Info menu items

• Network menu settings other than those in the Notifications and Others menus

Note: In addition to the methods covered in this section, you can also copy and transfer settings to

multiple projectors over a network using the EasyMP Network Updater software. See the online EasyMP

Network Updater Operation Guide for instructions. You can download the latest software and

documentation from the Epson website.

Saving Settings to a USB Flash Drive

Transferring Settings from a USB Flash Drive

Saving Settings to a Computer

Transferring Settings from a Computer

Parent topic: Adjusting Projector Features

Saving Settings to a USB Flash Drive

You can save the projector settings you want to transfer to a USB flash drive.

Note: Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly.

The flash drive must use the FAT format and cannot have any security features.

1. Turn off the projector and unplug the power cord from the projector's power inlet.

160

2. Insert the flash drive into the USB-A port.

Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be

saved correctly.

3. Press and hold the Esc button on the control panel or remote control as you connect the power cord

to the projector's power inlet.

4. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release

the Esc button.

The lights flash to indicate that settings are transferring to the flash drive. When the lights stop

flashing, the On/Standby light turns blue and the projector enters standby mode.

Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This

could damage the projector.

5. Once the projector enters standby mode, remove the flash drive.

Parent topic: Copying Menu Settings Between Projectors

Transferring Settings from a USB Flash Drive

After saving projector settings to a USB flash drive, you can transfer them to another projector of the

same model.

161

Note: Make sure the USB flash drive contains only a single settings transfer from another projector of

the same model. The settings are contained in a file called pjconfdata.bin. If the drive contains other

files, the transfer may not complete correctly.

Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have

to repeat your adjustments.

1. Turn off the projector and unplug the power cord from the projector's power inlet.

2. Insert the flash drive into one of the USB-A ports.

Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be

saved correctly.

3. Press and hold the Menu button on the control panel or remote control as you connect the power

cord to the projector's power inlet.

4. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release

the Menu button.

The lights flash to indicate that settings are transferring to the projector. When the lights stop

flashing, the On/Standby light turns blue and the projector enters standby mode.

Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This

could damage the projector.

5. Once the projector enters standby mode, remove the flash drive.

162

Parent topic: Copying Menu Settings Between Projectors

Saving Settings to a Computer

You can save the projector settings you want to transfer to a computer.

Your computer must be running one of the following operating systems:

• Windows Vista

• Windows 7

• Windows 8.x

• Windows 10

• OS X 10.7.x

• OS X 10.8.x

• OS X 10.9.x

• OS X 10.10.x

• OS X 10.11.x

• macOS 10.12.x

• macOS 10.13.x

1. Turn off the projector and unplug the power cord from the projector's power inlet.

2. Connect a USB cable to your projector's USB-B port.

163

3. Connect the other end to any available USB port on your computer.

4. Press and hold the Esc button on the control panel or remote control as you connect the power cord

to the projector's power inlet.

5. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release

the Esc button.

The projector shows up as a removable disk on your computer.

6. Open the removable disk and copy the pjconfdata.bin file to your computer.

7. Once the file has copied, do one of the following:

•Windows: Open the My Computer,Computer, or Windows Explorer utility. Right-click the

name of your projector (listed as a removable disk) and select Eject.

•Mac: Drag the removable disk icon for your projector from the desktop into the trash.

The projector enters standby mode when you disconnect the USB cable.

Parent topic: Copying Menu Settings Between Projectors

Transferring Settings from a Computer

After saving projector settings to a computer, you can transfer them to another projector of the same

model.

Your computer must be running one of the following operating systems:

• Windows Vista

• Windows 7

• Windows 8.x

• Windows 10

• OS X 10.7.x

• OS X 10.8.x

• OS X 10.9.x

• OS X 10.10.x

• OS X 10.11.x

• macOS 10.12.x

• macOS 10.13.x

164

Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have

to repeat your adjustments.

1. Turn off the projector and unplug the power cord from the projector's power inlet.

2. Connect a USB cable to your projector's USB-B port.

3. Connect the other end to any available USB port on your computer.

4. Press and hold the Menu button on the control panel or remote control as you connect the power

cord to the projector's power inlet.

5. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release

the Menu button.

The projector shows up as a removable disk on your computer.

6. Copy the pjconfdata.bin file from your computer to the removable disk.

Note: Do not copy any other files to the removable disk.

7. Once the file has copied, do one of the following:

•Windows: Open the My Computer,Computer, or Windows Explorer utility. Right-click the

name of your projector (listed as a removable disk) and select Eject.

•Mac: Drag the removable disk icon for your projector from the desktop into the trash.

All the lights start flashing to indicate that the projector's settings are being updated. When the lights

stop flashing, the On/Standby light turns blue and the projector enters standby mode.

165

Caution: Do not unplug the power cord while the lights are flashing. This could damage the

projector.

Parent topic: Copying Menu Settings Between Projectors

166

Using the Interactive Features

Follow the instructions in these sections to use your projector's interactive features.

Interactive Modes

Using the Interactive Pens

Using Finger Touch Interactivity

Using BrightLink with a Computer

Windows Pen Input and Ink Tools

Using BrightLink Without a Computer

Splitting the Interactive Screen

Using Interactive Features with Two Projectors (DuoLink)

Interactive Modes

The BrightLink interactive features turn any wall into an interactive whiteboard, either with or without a

computer. These interactive modes are available:

• In built-in whiteboard mode, you can use one or both interactive pens or your finger to write on the

projected "whiteboard". You can split the screen and interact with the whiteboard and another source.

You can insert images from a USB drive and save or print your whiteboard without connecting a

computer.

• In built-in annotation mode (PC Free Annotation), you can annotate over content projected from a

computer, tablet, document camera, or other source. You can capture your annotated pages, and

save or print them. You can even split the screen and annotate on two images at the same time, using

one or both pens.

• In PC Interactive mode, you can use the interactive pen or your finger as a mouse to navigate, select,

and scroll through content from your computer. You can split the screen and interact with two

projected images at the same time.

Note: You can also use the Easy Interactive Tools software to provide additional interactive features,

such as saving your annotations and printing them. See the online Easy Interactive Tools Operation

Guide for detailed instructions.

Using the Projected Screen as a Whiteboard (Built-in Whiteboard Mode)

Drawing on a Projected Image (Built-in Annotation Mode)

Controlling Computer Features from a Projected Screen (PC Interactive Mode)

167

Parent topic: Using the Interactive Features

Using the Projected Screen as a Whiteboard (Built-in Whiteboard Mode)

You can use the interactive pens or your finger to write or draw on the projection surface just as you

would on a chalkboard or dry erase board. You can use one pen, both pens at the same time, or a

combination of pens and finger touch.

1. Hover near or tap the board or projected image with the interactive pen or your finger. Tap the

whiteboard icon on the toolbar.

You see the whiteboard screen, with the main toolbar on the side and the projector control toolbar on

the bottom of the screen:

2. To move the main toolbar to the other side of the screen, tap the arrow on the opposite side of

the screen.

Note: You can use the pen or your finger to move the arrow icon up or down to reposition the

toolbar.

168

3. To close the main toolbar, select the icon at the bottom of the toolbar.

Note: If you want to hide the toolbar automatically after drawing, select the icon at the bottom of

the toolbar.

4. To show or hide the projector control toolbar, select the or arrow.

Note: You can also show or hide the projector control toolbar by setting the Extended > Display >

Projector Control setting to On or Off.

Parent topic: Interactive Modes

Related references

Projector Setup Settings - Extended Menu

Drawing on a Projected Image (Built-in Annotation Mode)

You can project from a computer, tablet, video device, or other source and annotate over your projected

content using the interactive pens or your finger. You can use one pen, both pens at the same time, or a

combination of pens and finger touch.

1. Project an image from a connected device.

2. Hover near or tap the board or projected image with the interactive pen or your finger. Tap the

built-in annotation mode icon on the toolbar.

169

You see the main toolbar on the side and the projector control toolbar on the bottom of the projected

image.

3. To move the main toolbar to the other side of the screen, tap the arrow on the opposite side of

the screen.

Note: You can use the pen or your finger to move the arrow icon up or down to reposition the

toolbar.

4. To switch to one of the other interactive modes, do one of the following:

• To switch to built-in whiteboard mode, select .

• To switch to PC Interactive mode, select , then select .

Note: You can also press the Pen Mode button on the remote control to switch between modes.

170

5. To close the main toolbar, select the icon at the bottom of the toolbar.

Note: If you want to hide the toolbar automatically after drawing, select the icon at the bottom of

the toolbar.

6. To show or hide the projector control toolbar, select the or arrow.

Note: You can also show or hide the projector control toolbar by setting the Extended > Display >

Projector Control setting to On or Off.

Parent topic: Interactive Modes

Related references

Projector Setup Settings - Extended Menu

Controlling Computer Features from a Projected Screen (PC Interactive Mode)

You can navigate, select, and interact with your computer programs from the projected screen using the

interactive pens or your finger just as you would a mouse.

Note: Mac users need to install the Easy Interactive Driver before using PC Interactive mode. Go to

epson.com/support (U.S.) or epson.ca/support (Canada) and select your projector.

1. Connect the projector to your computer using a USB cable.

2. Turn on your projector and computer to project your computer screen.

171

3. Press the Menu button on the remote control, select the Extended menu, and press the Enter

button.

4. Select the USB Type B setting and press the Enter button.

5. Select one of the following:

•Easy Interactive Function to use PC Interactive mode.

•USB Display/Easy Interactive Function to use PC Interactive mode and USB Display.

6. Press the Esc button to exit the USB Type B menu.

172

7. Select the Easy Interactive Function setting and press the Enter button.

8. Select one of the following as the Pen Operation Mode depending on the operating system your

computer is using:

•Windows/Mac Mode: Windows or Mac

•Ubuntu Mode: Ubuntu

9. Press the Enter button and press the Menu button to exit the Extended menu.

10. Hover near or tap on the board or the projected image with the interactive pen or your finger.

The icon is displayed on the projected screen.

11. Select the icon, then select the icon.

You can now operate the computer using the interactive pens or your finger.

PC Interactive Mode System Requirements

Parent topic: Interactive Modes

Related references

Projector Setup Settings - Extended Menu

PC Interactive Mode System Requirements

Your computer system must meet the system requirements here to use PC Interactive mode and Easy

Interactive Tools.

173

Note: Easy Interactive Driver must be installed and running to use Easy Interactive Tools on a Mac.

Requirement Windows Mac

Operating system Windows Vista SP2 Ultimate, Enterprise,

Business, Home Premium, and Home

Basic (32-bit)

OS X 10.7.x, 10.8.x, 10.9.x, 10.10.x,

10.11.x; macOS 10.12.x, macOS

10.13.x

(QuickTime 7.7 or later required)

Windows 8.x, Pro, Enterprise, Windows

7 SP1 Ultimate, Enterprise, Professional,

Home Premium (32- and 64-bit)

Windows 10 Home and Pro (32- and

64bit)

CPU Core2 Duo 1.2 GHz or faster (Core i3 or

faster recommended)

Core2 Duo 1.2 GHz or faster (Core

i5 or faster recommended)

Memory 1GB or more (2GB or more recommended)

Hard disk space 100MB or more

Display Resolution between 1024 × 768 and 1920 × 1200, 16-bit color or greater

Parent topic: Controlling Computer Features from a Projected Screen (PC Interactive Mode)

Using the Interactive Pens

Follow the instructions in these sections to use the interactive pens.

Using the Pens

Pen Calibration

Parent topic: Using the Interactive Features

Using the Pens

Your projector came with a blue pen and an orange pen, identified by the color strip at the end of the

pen. You can use either pen, or both pens at the same time (one of each color) in built-in whiteboard or

annotation mode.

Make sure the pen batteries are installed.

174

Note: The pen turns off automatically after 15 seconds of inactivity. Hold the pen to turn the pen back on.

1 Pen tip

2 Battery light

3 Function button

4 Attachment for optional strap or cord

5 Battery cover

• To turn on the pen, move the pen.

Note: If you press the function button, the battery light flashes briefly, then turns off. If the battery is

low, the battery light flashes continuously.

175

• For best performance, hold the pen perpendicular to the board, as shown below. Do not cover the

black section near the tip of the pen.

• To write or draw on the projection surface in built-in annotation mode or built-in whiteboard mode, do

the following:

• To select a projected item, such as an icon, tap the projection surface with the pen tip.

• To draw on the projected screen, tap the projection surface with the pen and drag it as necessary.

• To move the pointer, hover over the surface without touching it.

• To switch the pen from drawing tool to eraser, press the button on the side.

Note: You can change the function of the button by changing the Pen Button Function setting in

the Extended menu.

176

• To use the pen as a mouse in PC Interactive mode, do the following:

• To left-click, tap the board with the pen tip.

• To double-click, tap twice.

• To right-click, press the button on the side or press and hold the pen on the screen (Windows).

• To click and drag, tap and drag with the pen.

• To move the cursor, hover over the board without touching it.

Note: You can turn off the hovering feature using the Hovering setting in the projector's Easy

Interactive Function menu.

Note: To make a long press of the pen act as a right-click on a Mac, set the Pen Operation Mode

setting to Ubuntu Mode and turn on the Enable Right Click setting.

Parent topic: Using the Interactive Pens

Related references

Projector Setup Settings - Extended Menu

Pen Calibration

Calibration coordinates the position of the pen with the location of your cursor. You only need to calibrate

the first time you use your projector's interactive features. Calibration results remain until you calibrate

again.

Be sure to calibrate the pen before performing finger touch calibration.

If you notice positioning discrepancies after doing any of the following, calibrate again:

• Performing Geometry Correction

• Adjusting the image size

177

• Using the Image Shift feature

• Moving the projector

Note: When using multiple projectors with DuoLink, draw a line across the two screens after pen

calibration and make sure the screens are aligned correctly. If the line position does not match, realign

the screens and perform calibration again.

Note: Move any pen you are not using away from the projection screen while calibrating.

Calibrating Automatically

Calibrating Manually

Parent topic: Using the Interactive Pens

Calibrating Automatically

You do not need the pens or a computer for Auto Calibration.

Note: You can start Auto Calibration by pressing the User button on the remote control or by pressing

the Menu button on the remote control as described here.

1. Press the Menu button, select the Extended menu, and press Enter.

178

2. Select the Easy Interactive Function setting and press Enter.

3. Select Auto Calibration and press Enter.

179

This screen appears:

4. Adjust the image focus, if necessary.

5. Press Enter to select Yes.

A pattern appears then disappears, and the system is calibrated. If you see a message that

calibration failed, you need to calibrate manually.

The cursor location and pen position should match after calibration. If not, you may need to calibrate

manually.

Parent topic: Pen Calibration

Related tasks

Calibrating Manually

If the cursor location and pen position do not match after auto calibration, you can calibrate manually.

180

1. Press the Menu button, select the Extended menu, and press Enter.

2. Select the Easy Interactive Function setting and press Enter.

181

3. Select Manual Calibration and press Enter.

This screen appears:

4. Adjust the image focus, if necessary.

5. Press Enter to select Yes.

A flashing green circle appears in the upper left corner of your projected image.

6. Touch the center of the circle with the tip of the pen.

182

The circle disappears, and you see another circle below the first one.

Note: For the most accurate calibration, make sure you touch the center of the circle.

Note: Make sure you are not blocking the signal between the pen and the interactive receiver (next

to the projection window on the projector).

183

7. Touch the center of the next circle, then repeat. When you get to the bottom of the column, the next

circle appears at the top of a new column.

Note: If you make a mistake, press the Esc button on the remote control or control panel to go back

to the previous circle. To restart the calibration process, press and hold the Esc button for 2

seconds.

8. Continue until all of the circles disappear.

Parent topic: Pen Calibration

Using Finger Touch Interactivity

You can use your finger to perform the same functions as the interactive pens when you install the

Touch Unit.

Note: See the Touch Unit and Control Pad Installation Guide for detailed instructions on installing the

Touch Unit and calibrating for finger touch interactivity.

Touch Unit Safety Instructions

Calibrating for Finger Touch Interactivity

Using Finger Touch Operations

Parent topic: Using the Interactive Features

184

Touch Unit Safety Instructions

The Touch Unit enables finger touch interactivity with your projector. Do not connect it to any other

projectors or devices.

A built-in, high-power laser is emitted from the laser diffusion ports on the back of the Touch Unit.

Follow these precautions when using the Touch Unit and finger touch interactivity:

• Children using finger touch interactivity should always be accompanied by an adult.

• Never disassemble or modify the Touch Unit. Never open any cases on the projector or Touch Unit.

Electrical voltages inside the projector can cause severe injury.

• Do not look into the laser diffusion ports on the back of the Touch Unit. The laser can damage your

eyes. Extra care should be taken when children are present.

• Do not allow the laser light from the Touch Unit to pass through or be reflected by any optical devices,

such as a magnifying glass or mirror. This could cause personal injury or fire.

• Do not view the laser light from the Touch Unit using an optical device such as an eye loupe,

magnifying glass, or microscope, especially within 2.75 inches (70 mm) of the laser diffusion ports.

This could damage your eyes.

• Unplug the projector from the electrical outlet and refer all repairs to qualified service personnel if any

problems occur with the Touch Unit. Continued use of the Touch Unit may result in fire or accidents,

and can also damage your eyes.

185

The Touch Unit is a Class 1 laser product that complies with IEC/EN60825-1:2007. The labels indicating

the Class 1 laser product and warnings are located in the following areas on the Touch Unit:

Parent topic: Using Finger Touch Interactivity

Calibrating for Finger Touch Interactivity

Finger touch calibration coordinates the positioning of your finger with the location of the cursor.

Note: Make sure you have calibrated the pens, installed the Touch Unit, performed angle adjustment,

and turned the Touch Unit on before calibrating for finger touch interactivity.

186

1. Press the Menu button, select the Extended menu, and press Enter.

2. Select the Easy Interactive Function setting and press Enter.

187

3. Select Touch Unit Setup and press Enter.

4. Select Touch Calibration and press Enter.

188

The following screen appears:

Note: If Touch Calibration is disabled, make sure Power is set to On.

5. Adjust the image focus, if necessary.

6. Press Enter to select Yes.

A flashing green circle appears in the upper left corner of your projected image.

7. Touch and hold the center of the circle with your finger until the circle disappears and another circle

appears, then release it.

The circle disappears, and you see another circle below the first one.

189

Note: For the most accurate calibration, make sure you touch the center of the circle with the tip of

your finger.

Note: Make sure you are not blocking the signal between your finger and the interactive receiver

(next to the projection window on the projector).

8. Touch the center of the next circle with your finger and continue until all of the circles disappear.

When you get to the bottom of a column, the next circle appears at the top of a new column.

Note: If you make a mistake, press the Esc button on the remote control or control panel to go back

to the previous circle. To restart the calibration process, press and hold the Esc button for 2

seconds.

190

9. If the cursor location and your finger position do not match, repeat these steps to calibrate again.

Parent topic: Using Finger Touch Interactivity

Related concepts

Pen Calibration

Using Finger Touch Operations

You can use your finger to interact with the projected screen, just as you would use an interactive pen.

You can use either a pen or your finger, or use both at the same time.

When performing touch operations with your finger, you can use two fingers in built-in annotation mode

and up to six fingers in built-in whiteboard mode.

1. Install the Touch Unit as described in the Touch Unit and Control Pad Installation Guide.

2. Turn on your projector. This automatically turns on the Touch Unit also.

The blue light on the Touch Unit remains lit.

Note: If the blue light does not turn on, press the Menu button on the remote control and make sure

the Extended > Easy Interactive Function > Touch Unit Setup > Power setting is set to On.

3. Calibrate the pens.

4. Adjust the angle of the Touch Unit as described in the Touch Unit and Control Pad Installation

Guide.

5. Calibrate for finger touch interactivity.

191

6. To write or draw on the projection surface in built-in annotation mode or built-in whiteboard mode, do

the following:

• To select a projected item, such as an icon, tap the projection surface with your finger.

• To draw on the projected screen, tap the projection surface with your finger and drag it as

necessary.

7. To use your finger as a mouse in PC Interactive mode, do the following:

• To left-click, tap the board with your finger.

• To double-click, tap twice with your finger.

• To right-click, press the board with your finger for about 3 seconds.

• To click and drag, press on and drag an item with your finger.

• To scroll, drag your finger on the screen.

8. If your operating system supports these functions, you can also do the following:

• To zoom in or out, touch an item using two fingers and either move your fingers away from each

other (zoom in) or toward each other (zoom out).

• To rotate an image, touch the image with your fingers and rotate your hand.

192

• To drag up or down on a page, or move backward or forward in a browser window, use swiping

gestures or flicks.

Note: Finger touch operations may not work correctly with long or artificial nails, or fingers wearing

bandages. If your fingers are too close together or crossed, or your sleeve or free hand touches the

screen, finger touch may not be recognized. Some operating systems may not support gestures.

Parent topic: Using Finger Touch Interactivity

Related references

Projector Setup Settings - Extended Menu

Using BrightLink with a Computer

You can connect a computer to the projector and install the Easy Interactive Tools software from the

website. You can then do the following:

• Use the pens or your finger as a mouse to control your computer

• Use the Easy Interactive Tools software to annotate with both pens or a combination of pen and finger

touch at the same time

Note: See the online Easy Interactive Tools Operation Guide for detailed information.

• Save and print your annotations

• Use the Tablet PC input panel in Windows 10, Windows 8.x, Windows 7, or Windows Vista

• Use Ink Tools for annotation in Microsoft Office (2007 or later) applications

Adjusting the Pen Operation Area

Easy Interactive Tools

Parent topic: Using the Interactive Features

Adjusting the Pen Operation Area

If you connect a different computer or adjust the computer's resolution, the pen operation area is

adjusted automatically to match your mouse pointer position. If you notice that the pen position is

incorrect when using PC Interactive mode, you can adjust the pen area manually.

Note: Manual adjustment is not available when projecting from a LAN source.

193

Note: To perform manual pen area adjustment, the computer must be connected to the projector's USB-

Bport.

1. Project your computer's desktop.

2. Press the Menu button, select the Extended menu, and press Enter.

3. Select the Easy Interactive Function setting and press Enter.

194

4. Set the Pen Mode setting to PC Interactive.

5. Select Advanced in the PC Interactive section and press Enter.

6. Make sure Auto Adjust Pen Area is set to Off, then select Manual Adj. Pen Area and press Enter.

195

You see this screen:

7. Press Enter to select Yes.

The mouse pointer moves toward the top left corner.

8. When the mouse pointer stops at the top left corner of the image, touch the tip of the pointer with the

interactive pen.

The mouse pointer moves toward the bottom right corner.

9. When the mouse pointer stops at the bottom right corner of the image, touch the tip of the pointer

with the interactive pen.

Parent topic: Using BrightLink with a Computer

Easy Interactive Tools

You can download the Easy Interactive Tools software for use with a computer. Easy Interactive Tools

lets you use your interactive pen to draw, save, and interact with projected content from your computer.

These two modes are available:

• Annotation (PC interactive) mode displays the toolbar on the projected image and lets you use the pen

or finger as a mouse to open applications, access links, and operate scroll bars, for example. You can

also annotate over whatever is displayed from your computer (using both pens and up to six fingers at

the same time).

• Whiteboard mode lets you project on one of 3 solid colors or 6 background patterns, and use the

toolbar to write or draw on the background. You can also import images from your computer or a

document camera. In full screen whiteboard mode, two people can use the pens at the same time.

Finger touch is also available in whiteboard mode.

Note: For detailed instructions on using the Easy Interactive Tools software, see the online Easy

Interactive Tools Operation Guide or the online help.

196

Parent topic: Using BrightLink with a Computer

Windows Pen Input and Ink Tools

If you are using Windows 10, Windows 8.x, Windows 7, or Windows Vista, you can use the pen input

and Ink tools to add input and annotations to your work. You can also use these features over a network

when you set the interactive features to be available on your network. See the online Epson iProjection

Operation Guide (Windows/Mac) for instructions on setting up your computer for network projection.

Enabling Windows Pen Input and Ink Tools

Using Windows Pen Input and Ink Tools

Parent topic: Using the Interactive Features

Enabling Windows Pen Input and Ink Tools

To use the pen input and Ink tools in Windows 10, Windows 8.x, Windows 7, or Windows Vista, you

need to adjust the pen operation mode in your projector's menus.

1. Press the Menu button, select the Extended menu, and press Enter.

197

2. Select the Easy Interactive Function setting and press Enter.

3. Select Pen Operation Mode and press Enter.

4. Select Windows/Mac Mode and press Enter.

Parent topic: Windows Pen Input and Ink Tools

198

Using Windows Pen Input and Ink Tools

If you are using Windows 10, Windows 8.x, Windows 7, or Windows Vista, you can add handwritten

input to your work and convert it to text.

If you have Microsoft Office 2007 or later, you can also use the Ink function to add handwritten notes to a

Word document, Excel spreadsheet, or PowerPoint presentation.

Note: Option names for the annotation functions may vary depending on your version of Microsoft

Office.

• To open the Touch Keyboard in Windows 10, right-click or tap-and-hold on the Taskbar, and select

Show touch keyboard button. Select the keyboard icon on the screen.

• To open the Touch Keyboard in Windows 8.x, right-click or tap-and-hold on the Taskbar, and select

Toolbars > Touch Keyboard. Select the keyboard icon on the screen and select the pen icon.

• To open the Tablet PC input panel in Windows 7 or Windows Vista, select > All Programs >

Accessories > Tablet PC > Tablet PC Input Panel.

You can write in the box using the interactive pen or your finger, and select from a variety of options to

edit and convert the text.

• To add Ink annotations in Microsoft Office applications, select the Review menu, and select Start

Inking. If Start Inking does not appear on the Review tab in your Microsoft Office application, change

the Pen Operation Mode setting in the projector's menus.

Note: In Microsoft Word or Excel, select the Insert tab and select Start Inking.

199

• To annotate your PowerPoint slides in Slideshow mode, press the button on the side of the interactive

pen or press the projection surface with your finger for about 3 seconds, and select Pointer Options >

Pen from the pop-up menu.

For more information about these features, see Windows Help.

Parent topic: Windows Pen Input and Ink Tools

Using BrightLink Without a Computer

You can use the pens or your finger to write or draw on the projection surface simultaneously without

connecting a computer (PC Free annotation). This lets you annotate images from a document camera,

iPad, DVD player, or other source.

These two modes are available:

• Built-in annotation mode displays the built-in toolbar on whatever image is being projected from a

document camera, iPad, or other source.

• Built-in whiteboard mode lets you project a white or black screen or one of 4 background patterns, and

use the toolbar to write or draw as you would on a chalkboard or dry erase board.

Using the Built-in Annotation Mode

Built-in Tools for Use Without a Computer

Using the Built-in Whiteboard Mode

Changing Pen Width and Color Using the Built-in Toolbar

Projector Control Toolbar

Selecting a Networked Device Source

Parent topic: Using the Interactive Features

Using the Built-in Annotation Mode

You can use either pen with the built-in toolbar, both pens at the same time, your finger, or a combination

of both pen and finger touch.

1. Select the source for the image you want to annotate. If you simply want to use a blank screen,

select any unused source.

2. To activate the toolbar, tap the projection surface with the pen or your finger.

You see arrow icons on the left and right side of the projected image.

200

Note: The toolbar arrows disappear if you do not use them. To make them reappear, tap the

projection surface with the pen or your finger.

3. To display the toolbar, select one of the arrows.

Note: You can use the pen or your finger to move the arrows up or down.

4. To close the toolbar, select the icon at the bottom of the toolbar.

Note: If you want to hide the toolbar automatically after drawing, select the icon at the bottom of the

toolbar.

Parent topic: Using BrightLink Without a Computer

Built-in Tools for Use Without a Computer

The built-in toolbar is embedded in the projector and allows you to draw and write on the projected

screen.

201

In the following illustration, the annotation mode tools are shown on the left, and the whiteboard mode

tools on the right:

Switch to built-in annotation mode

Switch to built-in whiteboard mode

202

Undo the last annotation

Redo the last undo

Switch to the computer interactive mode

Select a white or black background or one of 4 patterns (whiteboard mode only)

Change custom pen or highlighter color and width

Write or draw free-form lines with custom pen

Write or draw free-form lines with transparent highlighter pen

Black pen (fine point on left, thick on right)

Red pen (fine point on left, thick on right)

203

Blue pen (fine point on left, thick on right)

Eraser (thin width on left, thick on right)

Clear all annotations

Hides or displays the toolbar after each annotation

• hides the toolbar

• displays the toolbar

Close the toolbar

Displays the tool you are using with your pen or finger

Parent topic: Using BrightLink Without a Computer

Using the Built-in Whiteboard Mode

In built-in whiteboard mode, you can project a solid or patterned background, and then write or draw on it

as you would on a chalkboard or dry erase board.

1. Select the Whiteboard tool on the built-in toolbar.

You see a white background.

2. If you want to change the background, do the following:

• Select the Background tool.

204

• Select a black background or one of 4 different patterns.

• Select the right arrow icon to close the selection window.

3. Do one of the following to write or draw on the background.

• To write, select one of the Pen tools.

• To highlight, select the Highlighter tool.

4. Do one of the following to clear all or part of the screen,

• To erase, select the Eraser tool.

• To clear the whole screen, select the Clear all tool.

Parent topic: Using BrightLink Without a Computer

Changing Pen Width and Color Using the Built-in Toolbar

When you use the custom pen or highlighter tools, you can select different colors and line widths.

You can also select the Black, Red, or Blue pen on the toolbar, and select the small circle on the left of

the pen for a thin line, or the large circle on the right for a thick line.

Note: When multiple users draw on the projected screen using multiple pens, you can select different

colors and line widths for each pen. When using finger touch operations, all users share the same color

and line width.

1. Select the arrow next to the custom Pen or Highlighter pen on the toolbar.

2. Select the color and line width you want.

3. Select the right arrow icon to close the selection window.

Parent topic: Using BrightLink Without a Computer

Projector Control Toolbar

The projector control toolbar lets you control the projector with your pen or finger from the projected

screen just as you would using the remote control.

205

Displays the Home screen.

Prints the projected image

Note: You cannot print content that is protected by HDCP.

Saves the projected image to a connected USB storage device

Note: You cannot save content that is protected by HDCP.

Shares the projected image using Epson iProjection (Windows/Mac)

Note: You cannot share content that is protected by HDCP.

Changes the image source using a displayed list.

Zooms into and out of the image

Turns off the picture and sound

Pauses video action

Increases or decreases the volume

206

Projects two images from different image sources

Sets the timer

Displays the document camera control toolbar. (Not all settings may be available depending

on your document camera model and connection type.)

• : Automatically focus the document camera image; make sure you enable this setting

before you zoom into or out of the document camera image

• : Pause video action

• : Zoom into or out of the image

• : Rotate the image 180 degrees

• : Capture the image

• : Start or stop video recording

• : Play recorded video

• : Close the document camera control toolbar

Turns off the projector.

Closes the projector control toolbar

Parent topic: Using BrightLink Without a Computer

207

Selecting a Networked Device Source

You can project an image from up to 50 devices connected to the projector via a network. You can select

the image source from computers running Epson iProjection (Windows/Mac) and smartphones or tablets

running the Epson iProjection app.

1. Select the Source Select icon on the projector control toolbar.

You see an image source list:

2. Select Participant List.

208

You see a list of available devices. The icon next to a user name indicates the currently selected

source.

3. Select the user name for the device from which you want to project.

Note: Select Refresh to update the user list.

4. Select Return.

You see the screen image from the selected device.

While the user selection screen is displayed, you cannot do the following:

• Select a different image source

• Use other interactive features

• Control the projector from the bottom toolbar

• Connect to multiple projectors

• Hear sound from the projector

• Project an image using Epson iProjection (Windows/Mac)

Note: You cannot access the Participant List screen when connecting to multiple projectors by using

Epson iProjection (Windows/Mac) and projecting the same image (mirroring).

209

Parent topic: Using BrightLink Without a Computer

Splitting the Interactive Screen

You can split the screen and project from two sources at the same time. You can annotate and interact

with both sources.

Note: If you make adjustments such as Brightness,Contrast,Color Saturation,Tint,Sharpness,

Noise Reduction, and Deinterlacing, they are only applied to the image on the left. Default

adjustments are made to the image on the right.

1. Press the Split button on the remote control and select the Split tool on the bottom toolbar, or

select the Split tool directly.

Note: If you press the Split button, the current image is reduced and appears on the left side of the

projection surface.

You see a screen like this:

210

2. Select the two sources you want to display, keeping the following in mind:

• Not all combinations of sources are valid.

• If you want to write on a blank screen, select any unused source.

• Unused sources display the color selected in the Display Background setting.

• The Logo option will display a blue background.

3. Press the Switch Source button to display the two sources.

4. Do any of the following as necessary:

• To change to a different source at any time, press the Menu button on the remote control and

select Source, or select the Split icon on the projector control toolbar.

• To annotate on the right screen, press the Menu button on the remote control, select Target Pen

Mode, and select Screen Right. Set the Pen Mode setting to PC Free Annotation.

• To use PC interactive mode on the right screen, press the Menu button on the remote control,

select Target Pen Mode, and select Screen Right. Set the Pen Mode setting to PC Interactive.

Note: If you select Video,USB1, or USB2 as a source, you cannot use PC interactive mode.

• To reverse the left and right images, press the Menu button on the remote control and select

Swap Screens.

• To make one image larger, press the Menu button on the remote control, select Screen Size, and

select Larger Left or Larger Right.

• To align the images with the top of the screen, press the Menu button on the remote control,

select Align, and select Top.

• To outline the drawing area, press the Menu button, select Display Drawing Area, and select On.

5. To return to displaying one image, press the Split or Esc button on the remote control, or press the

Split Screen icon on the bottom toolbar and select Exit Split Screen.

You cannot perform the following operations during split screen projection:

• Menu settings

• E-Zoom

• Switching aspect mode

•User button operations

211

• Auto Iris

Selecting Interactive Split Screen Settings

Parent topic: Using the Interactive Features

Related references

Projector Setup Settings - Extended Menu

Selecting Interactive Split Screen Settings

You can select split screen projection settings using the projector control toolbar.

1. Select the Split icon on the projector control toolbar.

2. Select the input sources for the left and right screen.

3. Select Switch Source.

4. Select the Split icon on the projector control toolbar again.

5. Select the tab.

212

You see a screen like this:

6. Do any of the following as necessary:

• To make one image larger than the other, select a Screen Size setting.

• To use the interactive pen as a mouse with a computer source, select a Target Pen Mode setting.

• To select the audio from either screen, select an Audio Source setting. Select Auto to hear audio

from the left screen or larger screen.

7. Select the icon to exit the settings screen.

Parent topic: Splitting the Interactive Screen

Using Interactive Features with Two Projectors (DuoLink)

You can use your projector's interactive features while projecting with two projectors installed side by

side. To get started, download and install the software from the website.

213

See the installation guide that came with your projector mount for instructions on installing multiple

projectors and selecting settings for interactive features. See the online DuoLink Setup Guide for

additional information.

Note: You may not be able to write and draw across the border of the images.

Temporarily Using Interactive Features on One Projector

Parent topic: Using the Interactive Features

Temporarily Using Interactive Features on One Projector

When you use the interactive features on an image projected by two side-by-side projectors, you can

temporarily limit the interactive features to one of the projectors.

1. Press the Home button on the remote control or projector or the icon on the projector control

toolbar.

You see a screen like this:

2. Press the icon.

214

You see a screen like this:

3. Set the Use this single projector setting to On.

You can now use the interactive features on the current projector only. When the projector turns off, the

Use this single projector setting returns to Off.

Parent topic: Using Interactive Features with Two Projectors (DuoLink)

215

Adjusting the Menu Settings

Follow the instructions in these sections to access the projector menu system and change projector

settings.

Using the Projector's Menus

Image Quality Settings - Image Menu

Input Signal Settings - Signal Menu

Projector Feature Settings - Settings Menu

Projector Setup Settings - Extended Menu

Projector Network Settings - Network Menu

Projector Setup Settings - ECO Menu

Projector Information Display - Info Menu

Projector Reset Options - Reset Menu

Using the Projector's Menus

You can use the projector's menus to adjust the settings that control how your projector works. The

projector displays the menus on the screen.

1. Press the Menu button on the control panel or remote control.

216

You see the menu screen displaying the Image menu settings.

2. Press the up or down arrow button to move through the menus listed on the left. The settings for

each menu are displayed on the right.

Note: The available settings depend on the current input source, resolution, or other menu settings.

3. To change settings in the displayed menu, press Enter.

4. Press the up or down arrow button to move through the settings.

5. Change the settings using the buttons listed on the bottom of the menu screens.

6. To return all the menu settings to their default values, select Reset.

7. When you finish changing settings on a menu, press Esc.

8. Press Menu or Esc to exit the menus.

Parent topic: Adjusting the Menu Settings

217

Image Quality Settings - Image Menu

Settings on the Image menu let you adjust the quality of your image for the input source you are currently

using. The available settings depend on the currently selected input source.

To change settings for an input source, make sure the source is connected and select that source.

Setting Options Description

Color Mode See the list of available Color

Modes

Adjusts the vividness of image

colors for various image types

and environments

Brightness Varying levels available Lightens or darkens the overall

image

Contrast Varying levels available Adjusts the difference between

light and dark areas of the image

Color Saturation Varying levels available Adjusts the intensity of the image

colors

Tint Varying levels available Adjusts the balance of green to

magenta tones in the image

Sharpness Varying levels available Adjusts the sharpness or

softness of image details

218

Setting Options Description

White Balance Color Temp.

G-M Correction

Customized

Sets the overall color tone of the

image

Color Temp.: sets the color

temperature according to the

selected color mode; lower

values tint the image red, and

higher values tint the image blue

G-M Correction: makes fine

adjustments to the color tone;

higher values tint the image

green and lower values tint the

image red

Customized: adjusts the

individual RGB components of

the offset and gain

Image Enhancement Noise Reduction Reduces flickering in analog

images

219

Setting Options Description

Advanced Gamma

RGBCMY

Deinterlacing

Gamma: adjusts the colors by

selecting one of the gamma

correction values, referring to the

projected image, or a gamma

graph

RGBCMY: adjusts the hue,

saturation, and brightness for

each color

Deinterlacing: sets whether to

convert interlaced-to-progressive

signals for certain video image

types

•Off: for fast-moving video

images

•Video: for most video images

•Film/Auto: for movies,

computer graphics, and

animation

Dynamic Contrast Off

Normal

High Speed

Adjusts the projected luminance

based on the image brightness

when certain Color Modes are

selected

Note: The Brightness setting does not affect laser brightness. To change the laser brightness mode,

use the Brightness Settings setting in the ECO menu.

Parent topic: Adjusting the Menu Settings

220

Input Signal Settings - Signal Menu

Normally the projector detects and optimizes the input signal settings automatically. If you need to

customize the settings, you can use the Signal menu. The available settings depend on the currently

selected input source.

Note: You can restore the default settings of the Position,Tracking, and Sync settings by pressing the

Auto button on the remote control.

To change settings for an input source, make sure the source is connected and select that source.

Setting Options Description

Resolution Auto

Wide

Normal

Sets the input signal resolution if not

detected automatically using the Auto

option

Aspect See the list of available

aspect ratios

Sets the aspect ratio (width-to-height

ratio) for the selected input source

Tracking Varying levels available Adjusts signal to eliminate vertical stripes

in computer images

Sync. Varying levels available Adjusts signal to eliminate fuzziness or

flickering in computer images

Position Up, down, left, right Adjusts the image location on the screen

221

Setting Options Description

Auto Setup On

Off

Automatically optimizes computer image

quality

Overscan Auto

Off

Changes the projected image ratio to

make the edges visible by a selectable

percentage or automatically

Advanced HDMI Video Range

Input Signal

Video Signal

HDMI Video Range: sets the video range

to match the setting of the device

connected to the HDMI input port

•Auto: detects the video range

automatically

•Normal: normally for images from a

device other than a computer; select if

the black areas of the image are too

bright

•Expanded: normally for images from a

computer; select if the image is too

dark

Input Signal: specifies the signal type

from input sources connected to

computer ports

•Auto: detects signals automatically

•RGB: corrects color for computer/RGB

video inputs

•Component: corrects color for

component video inputs

Video Signal: specifies the signal type

from input sources connected to video

ports; select Auto to automatically detect

the signal

Parent topic: Adjusting the Menu Settings

222

Projector Feature Settings - Settings Menu

Options on the Settings menu let you customize various projector features.

Setting Options Description

Geometry Correction H/V Keystone

Quick Corner

Arc Correction

Adjusts image shape to

rectangular (horizontally and

vertically)

H/V Keystone: lets you manually

correct horizontal and vertical

sides

Quick Corner: select to correct

image shape and alignment

using an on-screen display

Arc Correction: select to adjust

the curve or arc of the horizontal

and vertical sides and load and

save settings

223

Setting Options Description

Split Screen — Divides the viewing area

horizontally and displays two

images side-by-side; while in

Split Screen mode, press Menu

to display the Split Screen

options or Esc to cancel split

screen display

Zoom Varying levels available Adjusts the size of the projected

image

Image Shift Varying positions available Adjusts the position of the

projected image

Volume Varying levels available Adjusts the volume of projector’s

speaker system or external

speakers

224

Setting Options Description

HDMI Link Device Connections

HDMI Link

Audio Out Device

Power On Link

Power Off Link

Link Buffer

Adjusts the HDMI Link options

that allow the projector remote to

control HDMI-connected devices

that support the CEC standard

Device Connections: lists the

devices connected to the HDMI

1/MHL,HDMI 2, and HDMI 3

ports

HDMI Link: enables or disables

the HDMI Link feature

Audio Out Device: selects

whether to output audio from the

internal speakers or a connected

audio/video system

Power On Link: controls what

happens when you turn on the

projector or a linked device

Power Off Link: controls

whether linked devices are

turned off when the projector is

turned off

Link Buffer: improves the

performance of operations when

the HDMI Link feature is not

working correctly

Lock Setting Control Panel Lock Controls projector button locking

to secure the projector

Full Lock: locks all buttons

Partial Lock: locks all buttons

except the power button

Off: no buttons locked

Pointer Shape Three shapes available Changes the shape of the remote

control pointer feature

225

Setting Options Description

Mic Input Level — Adjusts the volume of projector’s

speaker system when a

microphone is connected

Remote Receiver Front/Rear

Front

Rear

Off

Limits reception of remote control

signals by the selected receiver;

Off turns off all receivers

User Button Light Source Mode

Info

Deinterlacing

Closed Caption

Resolution

Mic Input Level

Pattern Display

Auto Calibration

Display the QR Code

Installation Guide

Assigns a menu option to the

User button on the remote

control for one-touch access

226

Setting Options Description

Pattern Pattern Display

Pattern Type

User Pattern

Test Pattern

Selects various pattern display

options

Pattern Display: lets you display

the selected pattern type on the

screen to aid in presentation

Pattern Type: selects the type of

grid or line pattern to display

User Pattern: captures a

projected screen and saves it as

a pattern for display

Test Pattern: displays a test

pattern to assist in focusing and

zooming the image and

correcting image shape

Installation Guide — Displays an on-screen guide with

instructions for installing and

positioning the projector.

Parent topic: Adjusting the Menu Settings

227

Projector Setup Settings - Extended Menu

Settings on the Extended menu let you customize various projector setup features that control its

operation.

Setting Options Description

Easy Interactive Function — See the Easy Interactive Function settings

table in this topic

Home Screen Home Screen Auto Disp.

Custom Function 1

Custom Function 2

Adjusts settings on the Home Screen

Home Screen Auto Disp.: controls whether

the Home screen displays automatically

when the projector is turned on

Custom Function 1 and Custom Function

2: let you customize the options displayed

on the Home screen and save your settings

as a preset

228

Setting Options Description

Display Messages

Display Background

Startup Screen

Color Uniformity

Toolbars

Pen Mode Icon

Projector Control

Selects various display options

Messages: controls whether messages are

displayed on the screen

Display Background: selects the screen

color or logo to display when no signal is

received

Startup Screen: controls whether a special

screen appears when the projector starts up

Color Uniformity: adjusts the color tone

balance

Toolbars: controls whether the drawing

toolbar is always displayed when in

annotation mode

Pen Mode Icon: controls the display of the

pen icon on the screen

Projector Control: controls where the

projector control toolbar is displayed on the

screen

Closed Caption Off

CC1

CC2

Controls use of closed captions and selects

the closed caption type (closed captions are

only visible for NTSC signals connected

through the Video port)

User's Logo — Creates a screen that the projector displays

to identify itself and enhance security

Projection Front

Front/Upside Down

Rear

Rear Upside Down

Selects the way the projector faces the

screen so the image is oriented correctly

229

Setting Options Description

Operation Direct Power On

High Altitude Mode

Auto Source Search

Auto Power On

Quick Startup

Connect ELPCB02

Date & Time

Selects various operation options

Direct Power On: lets you turn on the

projector without pressing the power button

High Altitude Mode: regulates the

projector’s operating temperature at

altitudes above 4921 feet (1500 m)

Auto Source Search: automatically detects

the image signal that is input when the

projector is turned on

Auto Power On: automatically turns on the

projector when it detects an input signal

from the selected port

Quick Startup: lets you start projecting

about five seconds after pressing the power

button (set A/V Output to While Projecting

first)

Connect ELPCB02: allows you to switch

between the HDMI2 and HDMI3 sources

when you press the HDMI2 button on the

optional PowerLite Pilot 2 control box

Date & Time: adjusts the projector's date

and time settings

•Daylight Savings Time: enables daylight

savings time

•Internet Time: updates the time

automatically via an online time server

230

Setting Options Description

A/V Settings A/V Output

Audio Output

HDMI1 Audio Output

HDMI2 Audio Output

HDMI3 Audio Output

Selects the following when the projector is

in standby mode (turned off):

A/V Output: the Always On setting lets the

projector output audio and video signals

even while it is standby mode; only

available when Standby Mode is set to

Communication On

Audio Output: selects the audio input port

when projecting images from non-HDMI

ports

HDMI1 Audio Output,HDMI2 Audio

Output, and HDMI3 Audio Output: select

which Audio port provides audio when

viewing images from the HDMI1,HDMI2, or

HDMI3 ports

USB Type B Easy Interactive

Function

USB Display/Easy

Interactive Function

Wireless Mouse/USB

Display

Selects what happens when you connect

your computer to the projector's USB-B port

Easy Interactive Function: lets you use

the interactive pens or your finger with your

computer

USB Display/Easy Interactive Function:

lets you display your computer's image

through the USB port and use the

interactive pens or your finger with your

computer

Wireless Mouse/USB Display: lets you

use the wireless mouse feature and display

your computer's image through the USB

port (interactivity not available)

231

Setting Options Description

Multi-Projection Multi-Projection

Projector ID

Color Mode

Color Uniformity

Brightness Settings

Color Matching

RGBCMY

Reset

Selects the following when you use multiple

projectors:

Multi-Projection: matches the display

settings of multiple projectors

Projector ID: assigns an ID for the projector

when you use multiple projectors

Color Mode: adjusts the vividness of image

colors for various image types and

environments

Color Uniformity: adjusts the color tone

balance

Brightness Settings: selects the

brightness mode of the projector

Color Matching: corrects the difference in

tint and brightness for each projected image

RGBCMY: adjusts the hue, saturation, and

brightness for each color

Reset: resets all of the Multi-Projection

settings to their default values

Language Various languages

available

Selects the language for projector menu

and message displays (not changed by

Reset option)

232

Easy Interactive Function Settings

Setting Options Description

General Easy Interactive Function settings

Auto Calibration

Manual Calibration

— Start calibration for the interactive pens

Touch Unit Setup Installation Pattern

Power

Angle Adjustment

Touch Calibration

Select settings for the Touch Unit

Installation Pattern: displays reference

points to help you determine the

installation position of the Touch Unit

Power: turns on the Touch Unit power

Angle Adjustment: performs angle

adjustment for laser diffusion

Touch Calibration: performs calibration

for finger touch operations

233

Setting Options Description

Pen Mode PC Free Annotation

PC Interactive

Selects the mode for the interactive pens

PC Free Annotation: draws on the

projected screen without software or PC

required

PC Interactive: operates a mouse or

interactive device from the projected

screen using the interactive pen or your

finger

Hovering On

Off

Turns the pen hovering feature on and

off; when set to On, the pointer follows

the pen tip as you hover it over the

screen and move it around

234

Setting Options Description

Advanced Distance of Projectors

Sync of Projectors

Multi-Projection

Wired Sync Mode

Preset Pen Thickness

Eraser Size

Color Palette

Pen Button Function

Default Touch Action

Confirm Clear Screen

Selects various settings for interactive

features

Distance of Projectors,Sync of

Projectors,Multi-Projection, and Wired

Sync Mode: let you adjust features for

using multiple projectors of the same

model in the same room

Preset Pen Thickness: lets you select

the default pen thickness when using the

drawing tools

Eraser Size: lets you select the default

eraser size when selecting the eraser tool

Color Palette: lets you choose a different

palette if certain colors are difficult to see

Pen Button Function: selects the

function of the button on the interactive

pen in annotation mode

Default Touch Action: selects the

default action when performing touch

operations in annotation mode

Confirm Clear Screen: lets you display a

confirmation screen before clearing all of

the content

PC Interactive Easy Interactive Function settings

Pen Operation Mode Windows/Mac Mode

Ubuntu mode

Sets the correct operating system for the

interactive pen features

Enable Right Click On

Off

Lets you use a long pen press or finger

press as a right-click operation when

using mouse mode

235

Setting Options Description

Advanced Pen Tip Button

Auto Adjust Pen Area

Manual Adj. Pen Area

Select pen operation and adjustment

options

Pen Tip Button: assign either Right

Click or Left Click to the pen tip button

Select either Auto Adjust Pen Area or

Manual Adj. Pen Area as the pen area

adjustment option

Note: You cannot reset the following settings using the Reset option in the Extended menu:

•Easy Interactive Function

•Color Uniformity

•Toolbars

•Pen Mode Icon

•Projector Control

•User's Logo

•Projection

•High Altitude Mode

•Auto Source Search

•Connect ELPCB02

•Date & Time

•A/V Output

•USB Type B

•Multi-Projection

•Projector ID

•Color Mode

•Color Matching

•Language

Parent topic: Adjusting the Menu Settings

236

Projector Network Settings - Network Menu

Settings on the Network menu let you view network information and set up the projector for monitoring

and control over a network.

Setting Options Description

Wireless LAN Power On

Off

Enables or disables wireless

communication

Net. Info - Wireless LAN Connection mode

Wireless LAN Sys.

Antenna level

Projector Name

SSID

DHCP

IP Address

Subnet Mask

Gateway Address

MAC Address

Region Code

Displays wireless network status and

details

237

Setting Options Description

Net. Info - Wired LAN Projector Name

DHCP

IP Address

Subnet Mask

Gateway Address

MAC Address

Displays wired network status and

details

Display the QR Code — Displays the QR code for quick

connection to a mobile device

Printer Settings IP Address

Quality

Paper Size

Configures the settings for the printer

connections

Network Configuration Accesses additional network

menus

Configures your network settings

Parent topic: Adjusting the Menu Settings

Projector Setup Settings - ECO Menu

Settings on the ECO menu let you customize projector functions to save power. When you select a

power-saving setting, a leaf icon appears next to the menu item.

238

Setting Options Description

Brightness Settings Light Source Mode

Brightness Level

Constant Brightness

Estimated Remains

Selects the brightness mode of

the projector laser

Light Source Mode: sets the

brightness for the laser; the

following settings are available:

•Auto: allows the projector to

sense the optimum laser

brightness and adjust the

brightness accordingly

•Normal: sets maximum

brightness level

•Quiet: reduces laser

brightness to 70% with

reduced fan noise

•Extended: reduces laser

brightness to 70% and saves

power and laser life

•Custom: allows you to select a

custom brightness level

Brightness Level: allows you to

select a custom brightness level

Constant Brightness: maintains

a constant brightness level

Estimated Remains: estimates

how long the projector can

maintain a constant brightness

level

Sleep Mode On

Off

Automatically places the

projector in standby mode after

an interval of inactivity

Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode

239

Setting Options Description

A/V Mute Timer On

Off

Automatically turns off the

projector after 30 minutes if

A/V Mute is enabled

Standby Mode Standby Mode

Port

Communication On: indicates

that the projector can be

monitored and controlled over a

network when the projector is in

standby mode; enable this

setting to allow the following

operations to occur when the

projector is in standby mode:

• Monitor and control the

projector over a network

• Output audio and video to an

external device (A/V Output

must be set to Always On)

Port: selects the Wired LAN or

Wireless LAN port to use while

the Standby Mode setting is set

to Communication On

ECO Display On

Off

Displays a leaf icon in the bottom

left corner of the projected screen

to indicate the power-saving

status when the laser brightness

changes

Note: The Light Source Mode setting is disabled if you turn on the Multi-Projection setting in the

Extended menu.

Parent topic: Adjusting the Menu Settings

240

Projector Information Display - Info Menu

You can display information about the projector and input sources by viewing the Info menu. However,

you cannot change any settings in the menu.

Select Version to display the projector's firmware version. Select Light Source Info to display the

projector's light source information. Select Projector Info to display the settings described below.

Information item Description

Operation Hours Displays the number of hours (H) the projector has been used since

it was turned on

Source Displays the name of the port to which the current input source is

connected

Input Signal Displays the input signal setting of the current input source

Resolution Displays the resolution of the current input source

Video Signal Displays the video signal format of the current input source

Refresh Rate Displays the refresh rate of the current input source

Sync Info Displays information that may be needed by a service technician

Status Displays information about projector problems that may be needed

by a service technician

Serial Number Displays the projector's serial number

241

Information item Description

Event ID Displays the Event ID number corresponding to a specific projector

problem; see the list of Event ID codes

Event ID Code List

Parent topic: Adjusting the Menu Settings

Event ID Code List

If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the

solution to the projector problem associated with the code.

Event ID code Cause and solution

0432 The network software did not start. Turn the projector off and then on again.

0435

0433 Cannot display the transferred images. Restart the network software.

0434 Unstable network communication. Check the network communication status, wait a

few moments, and try connecting to the network again.

0481

0482

0485

0484 Communication with computer was disconnected. Restart the network software.

0483 The network software quit unexpectedly. Check the network communication status,

then turn the projector off and then on again.

04FE

0479 A projector system error has occurred. Turn the projector off and then on again.

04FF

0891 Cannot find the SSID (network name). Make sure your computer and projector are

connected to your access point's current SSID.

0892 The WPA/WPA2 authentication type does not match. Make sure the wireless

network security settings are correct.

0893 The WEP/TKIP encryption type does not match. Make sure the wireless network

security settings are correct.

242

Event ID code Cause and solution

0894 Communication with unauthorized access point was disconnected. Contact your

network administrator.

0898 Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.

If you are not using DHCP, turn off the DHCP setting in the Network menus.

0899 A communication error has occurred. Try restarting the network software and

restarting your projector. If that does not solve the problem, contact Epson for help.

089A The EAP authentication type does not match the network. Check the wireless LAN

security settings and make sure that the security certificate is installed correctly.

089B EAP server authentication failed. Check the wireless LAN security settings and

make sure that the security certificate is installed correctly.

089C EAP client authentication failed. Check the wireless LAN security settings and make

sure that the security certificate is installed correctly.

089D Key exchange failed. Check the wireless LAN security settings and make sure that

the security certificate is installed correctly.

0920 The internal battery that saves the projector's date and time settings is running low.

Contact Epson for help.

Parent topic: Projector Information Display - Info Menu

243

Projector Reset Options - Reset Menu

You can reset most of the projector settings to their default values using the Reset All Config option on

the Reset menu.

You cannot reset the following settings using the Reset All Config option:

• Input Signal

• Zoom

• Image Shift

• User's Logo

• Color Uniformity

• Color Matching

• Language

• Date & Time

• Network menu items (Wireless LAN Power, Printer Settings)

• Password

• Operation Hours

• Light Source Info

Parent topic: Adjusting the Menu Settings

244

Maintaining and Transporting the Projector

Follow the instructions in these sections to maintain your projector and transport it from place to place.

Projector Maintenance

Air Filter and Vent Maintenance

Replacing the Remote Control Batteries

Replacing the Hard Pen Tips

Replacing the Soft Pen Tips

Transporting the Projector

Projector Maintenance

Your projector needs little maintenance to keep working at its best.

You may need to clean the projection window and obstacle sensor periodically, and clean the air filter

and air vents to prevent the projector from overheating due to blocked ventilation.

The only parts you should replace are the air filter, pen batteries and tips, and remote control batteries. If

any other part needs replacing, contact Epson or an authorized Epson servicer.

This projector uses a sealed laser light source which does not need servicing and cannot be replaced.

Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open

any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages

in the projector can injure you severely.

Warning: Do not try to service this product yourself, except as specifically explained in this manual.

Refer all other servicing to qualified servicers.

Cleaning the Projection Window

Cleaning the Obstacle Sensor

Cleaning the Projector Case

Parent topic: Maintaining and Transporting the Projector

Cleaning the Projection Window

Clean the projection window periodically, or whenever you notice dust or smudges on the surface.

• To remove dust or smudges, gently wipe the projection window with lens-cleaning paper.

245

• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the

projection window.

Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the

projector may cause a fire.

Caution: Do not use canned air, or the gases may leave a flammable residue.

Parent topic: Projector Maintenance

Related tasks

Turning Off the Projector

Cleaning the Obstacle Sensor

Clean the projector's obstacle sensor glass (circled in red) periodically, or if you see a message telling

you to remove any obstacles that are interfering with the projection area.

• To remove dust or smudges, gently wipe the obstacle sensor glass with lens-cleaning paper.

• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the

obstacle sensor glass.

Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the

projector may cause a fire.

246

Caution: Do not use canned air, or the gases may leave a flammable residue.

Parent topic: Projector Maintenance

Related tasks

Turning Off the Projector

Cleaning the Projector Case

Before cleaning the projector case, turn off the projector and unplug the power cord.

• To remove dust or dirt, use a soft, dry, lint-free cloth.

• To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid

directly on the projector.

Caution: Do not use wax, alcohol, benzine, paint thinner, or other chemicals to clean the projector

case. These can damage the case. Do not use canned air, or the gases may leave a flammable

residue.

Parent topic: Projector Maintenance

Related tasks

Turning Off the Projector

Air Filter and Vent Maintenance

Regular filter maintenance is important to maintaining your projector. Your Epson projector is designed

with an easily accessible, user-replaceable filter to protect your projector and make regular maintenance

simple. Filter maintenance intervals will depend on the environment.

If regular maintenance is not performed, your Epson projector will notify you when the temperature

inside the projector has reached a high level. Do not wait until this warning appears to maintain your

projector filter as prolonged exposure to high temperatures may reduce the life of your projector or laser.

Damage due to the failure to properly maintain the projector or its filter may not be covered by the

projector's Limited Warranty.

Cleaning the Air Filter and Vents

Replacing the Air Filter

Parent topic: Maintaining and Transporting the Projector

247

Cleaning the Air Filter and Vents

Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.

Caution: Do not use water or any detergent to clean the air filter. Do not use canned air, or the gases

may leave a flammable residue.

1. Turn off the projector and unplug the power cord.

2. Slide the air filter cover latch and open the air filter cover.

248

3. Pull the air filter out of the projector.

4. Tap each side of the filter 4 to 5 times to shake off any excess dust. Do this outside the room or

away from the projector.

Caution: Do not use excessive force when tapping the air filter, or it may crack and become

unusable. Do not rinse the air filter in water, or use any detergent or solvent to clean it. Do not use

249

canned air; the gases may leave a flammable residue, or push dust and debris into the projector's

optics or other sensitive areas.

5. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust.

Note: If dust is difficult to remove or the air filter is damaged, replace the air filter.

6. Place the air filter back in the projector as shown.

250

7. Close the air filter cover.

Parent topic: Air Filter and Vent Maintenance

Related tasks

Turning Off the Projector

Replacing the Air Filter

You need to replace the air filter in the following situations:

• After cleaning the air filter, you see a message telling you to clean or replace it

• The air filter is torn or damaged

You can replace the air filter while the projector is mounted on the wall or ceiling.

1. Turn off the projector and unplug the power cord.

251

2. Slide the air filter cover latch and open the air filter cover.

252

3. Pull the air filter out of the projector.

Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations.

4. Place the new air filter in the projector as shown.

253

5. Close the air filter cover.

Parent topic: Air Filter and Vent Maintenance

Related tasks

Turning Off the Projector

Replacing the Remote Control Batteries

The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they

run out.

Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,

or mix new and old batteries.

1. Remove the battery cover as shown.

2. Remove the old batteries.

Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on

your hands. If it gets on your hands, wash them immediately to avoid injury.

254

3. Insert the batteries with the +and –ends facing as shown.

4. Replace the battery cover and press it down until it clicks into place.

Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat

or flame. Keep batteries out of the reach of children; they are choking hazards and are very

dangerous if swallowed.

Parent topic: Maintaining and Transporting the Projector

Replacing the Hard Pen Tips

If the pen tips become damaged or no longer work correctly, you can replace them.

255

1. Twist off the tip of the pen to remove it.

256

2. Twist on the new tip.

Parent topic: Maintaining and Transporting the Projector

Replacing the Soft Pen Tips

If the pen tips become damaged or no longer work correctly, you can replace them.

257

1. Twist off the tip of the pen to remove it.

2. Remove the soft tip.

258

3. Insert the new tip.

4. Twist on the pen tip.

Parent topic: Maintaining and Transporting the Projector

259

Transporting the Projector

The projector contains precision parts, some of which are glass. Follow the guidelines here to transport,

ship, or store the projector safely.

1. Remove any equipment connected to the projector.

2. Do one of the following:

• When transporting the projector a long distance or as checked luggage, pack it in a firm box with

cushioning around it and mark the box "Fragile."

• When shipping the projector for repairs, place it in its original packing materials, if possible, or use

equivalent materials with cushioning around the projector. Mark the box "Fragile."

Note: Epson shall not be liable for any damages incurred during transportation.

Parent topic: Maintaining and Transporting the Projector

260

Solving Problems

Check the solutions in these sections if you have any problems using the projector.

Projection Problem Tips

Projector Light Status

Using the Projector Help Displays

Solving Image or Sound Problems

Solutions to Microphone Problems

Solving Projector or Remote Control Operation Problems

Solving Network Problems

Solving Interactive Problems

Where to Get Help

Projection Problem Tips

If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it

on.

If this does not solve the problem, check the following:

• The lights on the projector may indicate what the problem is.

• The Help option on the Home screen can display information about common problems, if the projector

is operating.

• The solutions in this manual can help you solve many problems.

If none of these solutions help, you can contact Epson for technical support.

Parent topic: Solving Problems

Related references

Projector Setup Settings - Extended Menu

Projector Light Status

Related tasks

Cleaning the Obstacle Sensor

Cleaning the Air Filter and Vents

Replacing the Air Filter

261

Projector Light Status

The lights on the projector indicate the projector status and let you know when a problem occurs. Check

the status and color of the lights and look for a solution in the table here.

1 On/Standby light

2 Status light

3 Laser light

4 Temp (temperature) light

On/Standby

light

Status light Laser light Temp light Status and solution

Blue Blue Off Off Normal operation.

262

On/Standby

light

Status light Laser light Temp light Status and solution

Blue Flashing blue Off Off Warming up. Wait for an image to

appear.

Shutting down. (When the Status light

stops flashing, you can unplug the

projector.)

Blue Off Off Off Standby, sleep mode, or monitoring.

Flashing blue Off Off Off Preparing for monitoring or quick

startup mode; all features are

disabled.

Flashing blue Varies Varies Flashing

orange

Projector is too hot.

• Make sure that the vents and air

filter are not clogged with dust or

obstructed by nearby objects.

• Clean or replace the air filter.

• Make sure the environmental

temperature is not too hot.

Off Flashing blue Off Orange Projector has overheated and turned

off. Leave it turned off to cool down.

After about five minutes, do the

following:

• Make sure that the vents and air

filter are not clogged with dust or

obstructed by nearby objects.

• Clean or replace the air filter.

• If operating the projector at high

altitude, turn on High Altitude

Mode.

• If the problem persists, unplug the

projector and contact Epson for

help.

Flashing blue Varies Flashing

orange

Varies Laser warning. Turn the projector off,

unplug it, and contact Epson for help.

263

On/Standby

light

Status light Laser light Temp light Status and solution

Off Flashing blue Orange Off Laser has a problem.

• Make sure that the vents and air

filter are not clogged with dust or

obstructed by nearby objects.

• Clean or replace the air filter.

• If the problem persists, unplug the

projector and contact Epson for

help.

Off Flashing blue Off Flashing

orange

A fan or sensor has a problem. Turn

the projector off, unplug it, and

contact Epson for help.

Off Flashing blue Flashing

orange

Off Internal projector error. Turn the

projector off, unplug it, and contact

Epson for help.

Flashing blue Varies Flashing

orange

Flashing

orange

Obstacle detection warning. A beep

sounds and you see an obstacle

warning. The projector turns off

automatically if you take no action.

• Remove any obstacles interfering

with the projection window.

• Clean the obstacle sensor.

If the problem persists, turn the

projector off, unplug it, and contact

Epson for help.

Off Flashing blue Orange Orange Obstacle detection error. Turn the

projector off, unplug it, and contact

Epson for help.

Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and

contact Epson for help.

Parent topic: Solving Problems

264

Using the Projector Help Displays

You can display information to help you solve common problems using the projector's Help system.

1. Turn on the projector.

2. Press the Home button on the projector or the remote control.

3. Press the arrow buttons to select the help icon and press Enter.

4. Select Display the Help menu.

5. Press Enter.

You see the Help menu.

6. Press the up and down arrow buttons to highlight the problem you want to solve.

7. Press Enter to view the solutions.

8. When you are finished, do one of the following:

• To select another problem to solve, press Esc.

• To exit the help system, press Home.

Parent topic: Solving Problems

Solving Image or Sound Problems

Check the solutions in these sections if you have any problems with projected images or sound.

Solutions When No Image Appears

Solutions When Image is Incorrect Using the USB Display Function

Solutions When "No Signal" Message Appears

Solutions When "Not Supported" Message Appears

Solutions When Only a Partial Image Appears

Solutions When the Image is Not Rectangular

Solutions When the Image Contains Noise or Static

Solutions When the Image is Fuzzy or Blurry

Solutions When the Image Brightness or Colors are Incorrect

Solutions to Sound Problems

Parent topic: Solving Problems

265

Solutions When No Image Appears

If no image appears, try the following solutions:

• Press the A/V Mute button on the remote control to see if the image was temporarily turned off.

• Make sure all necessary cables are securely connected and the power is on for the projector and

connected video sources.

• Make sure the image being projected is not completely black (only when projecting computer images).

• Press the projector's power button to wake it from standby or sleep mode. Also see if your connected

computer is in sleep mode or displaying a blank screen saver.

• Press the Menu button. If the projector menu is able to display, there may be a problem with the

connected video source, cable connection, or port.

• Check the settings on the Signal menu to make sure they are correct for the current video source.

• Adjust the Brightness setting on the Image menu.

• Adjust the Brightness Settings on the ECO menu.

• Check the Display setting to make sure Messages is set to On.

• If the projector does not respond when you press the control panel buttons, the buttons may be

locked. Unlock the buttons.

• If the projector does not respond when you press buttons on the remote control, make sure the remote

receivers are turned on.

• For images projected with Windows Media Center, reduce the screen size from full screen mode.

• For images projected from applications using Windows DirectX, turn off DirectX functions.

• The projector may not be able to project copyrighted videos that you play back on a computer. For

details, see the manual supplied with your computer.

• If the other solutions do not solve the problem, reset all of the projector settings using the options on

the Reset menu.

Parent topic: Solving Image or Sound Problems

Related references

Input Signal Settings - Signal Menu

Projector Feature Settings - Settings Menu

Related tasks

Controlling the Volume with the Volume Buttons

Selecting an Image Source

266

Unlocking the Projector's Buttons

Solutions When Image is Incorrect Using the USB Display Function

If no image appears or if the image appears incorrectly using the USB Display function, try the following

solutions:

• Press the USB button on the remote control.

• Press the Source Search button on the remote control or control panel, and select USB Display.

• Make sure the USB Display software has installed correctly. Install it manually if necessary.

• Make sure the USB Type B setting in the Extended menu is set to one of the USB Display options.

• On a Mac, select the USB Display icon in the Dock or from the Applications folder.

• For images projected with Windows Media Center, reduce the screen size from full screen mode.

• For images projected from applications using Windows DirectX, turn off DirectX functions.

• If the mouse cursor flickers, select Make the movement of the mouse pointer smooth in the Epson

USB Display Settings program on your computer.

• Turn off the Transfer layered window setting in the Epson USB Display Settings program on your

computer.

• If you are projecting using the WUXGA (1920 × 1200) video format and change the computer

resolution during projection, the video quality and performance may decline.

• Make sure you are using the most recent version of the USB Display software. You can download the

latest version from the Epson web site. Go to epson.com/support (U.S.) or epson.ca/support (Canada)

and select your projector.

Parent topic: Solving Image or Sound Problems

Related references

Projector Setup Settings - Extended Menu

Related tasks

Selecting an Image Source

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:

• Press the Source Search button and wait a few seconds for an image to appear.

• Press the Home button on the remote control to select from a list of available sources (shown in black

text).

267

• Turn on the connected computer or video source, and press its play button to begin your presentation,

if necessary.

• Check the connection from the projector to your video sources.

• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.

• If necessary, turn the projector and the connected computer or video source off and then on again.

• If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.

• Connect the video source directly to the projector.

• Try a different video cable.

• If the other solutions do not solve the problem, reset all of the projector settings using the options on

the Reset menu.

Displaying From a PC Laptop

Displaying From a Mac Laptop

Parent topic: Solving Image or Sound Problems

Related tasks

Selecting an Image Source

Table of Contents

Epson V11H877022 User Manual

Related Manuals