Notations Used in This Guide
- Using the Manual to Search for Information
- Getting the Latest Version of the Documents
List of Functions
Introduction to Your Projector
- Projector Features
  - Quick and Easy Setup
  - Easy Wireless Projection
- Projector Parts and Functions
Setting Up the Projector
Using Basic Projector Features
Adjusting Projector Features
Using the Projector on a Network
Monitoring and Controlling the Projector
Adjusting the Menu Settings
Maintaining the Projector
Solving Problems
Appendix

Epson VS260 User Manual

Displayed below is the user manual for VS260 by Epson which is a product in the Data Projectors category. This manual has pages.

Related Manuals

Epson Epson M-190: 57.5mm, 5V, Standard Ribbon Manual

Epson Epson SureColor SCF7000 Manual

Epson TM-U220A Manual

Epson TM-U295 Manual

Epson TM-U220PA Manual

Epson TM-U220PA-103 Manual

Epson TM-U295P Parallel White Manual

Epson TM-C100 Manual

User's Guide

IMPORTANT: Before using this product, make sure you read the safety

instructions in the online Notices.

For information on contacting Epson, see the online Notices.

Contents 2

Notations Used in This Guide 7

Using the Manual to Search for Information .................................. 8

Searching by Keyword................................................................................................................... 8

Jumping Directly from Bookmarks............................................................................................ 8

Printing Only the Pages You Need............................................................................................ 8

Getting the Latest Version of the Documents................................. 9

List of Functions 10

Introduction to Your Projector 14

Projector Features............................................................................ 15

Quick and Easy Setup .................................................................................................................. 15

Easy Wireless Projection ............................................................................................................. 15

Projector Parts and Functions ........................................................ 17

Projector Parts - Front.................................................................................................................. 17

Projector Parts - Rear.................................................................................................................... 18

Projector Parts - Base ................................................................................................................... 19

Projector Parts - Control Panel................................................................................................. 20

Projector Parts - Remote Control ............................................................................................ 21

Setting Up the Projector 23

Projector Placement ........................................................................ 24

Projector Setup and Installation Options............................................................................. 25

Projection Distance....................................................................................................................... 25

Projector Connections ..................................................................... 27

Connecting to a Computer........................................................................................................ 27

Connecting to a Computer for VGA Video and Audio.............................................. 27

Connecting to a Computer for USB Video and Audio............................................... 28

Connecting to a Computer for HDMI Video and Audio ........................................... 29

Connecting to Video Sources ................................................................................................... 29

Connecting to an HDMI Video Source ............................................................................ 30

Connecting to a Composite Video Source..................................................................... 30

Connecting to External USB Devices ..................................................................................... 31

USB Device Projection ........................................................................................................... 31

Connecting to a USB Device ............................................................................................... 31

Disconnecting a USB Device ............................................................................................... 32

Connecting to a Document Camera ...................................................................................... 32

Connecting to External Devices............................................................................................... 32

Connecting to a VGA Monitor ............................................................................................ 32

Connecting to External Speakers ...................................................................................... 33

Connecting a Microphone ................................................................................................... 34

Installing Batteries in the Remote Control.................................... 35

Remote Control Operation.............................................................. 36

Opening the Lens Cover .................................................................. 37

Using Basic Projector Features 38

Turning On the Projector ................................................................ 39

Home Screen................................................................................................................................... 40

Turning Off the Projector ................................................................ 42

Setting the Date and Time .............................................................. 43

Selecting the Language for the Projector Menus ......................... 45

Projection Modes ............................................................................. 46

Changing the Projection Mode Using the Remote Control.......................................... 46

Changing the Projection Mode Using the Menus ............................................................ 46

Displaying a Test Pattern ................................................................ 48

Adjusting the Image Height............................................................ 49

Image Shape..................................................................................... 50

Auto V-Keystone ............................................................................................................................ 50

Correcting the Image Shape with the Horizontal Keystone Slider............................. 50

Contents 3

Correcting the Image Shape with the Keystone Buttons .............................................. 51

Correcting the Image Shape with Quick Corner ............................................................... 52

Resizing the Image with the Zoom Ring........................................ 54

Focusing the Image Using the Focus Ring..................................... 55

Selecting an Image Source.............................................................. 56

Image Aspect Ratio .......................................................................... 58

Changing the Image Aspect Ratio.......................................................................................... 58

Available Image Aspect Ratios ................................................................................................. 58

Projected Image Appearance with Each Aspect Mode .................................................. 59

Adjusting Image Quality (Color Mode).......................................... 61

Changing the Color Mode ......................................................................................................... 61

Available Color Modes................................................................................................................. 61

Setting Auto Iris ............................................................................................................................. 61

Controlling the Volume with the Volume Buttons ....................... 63

Adjusting Projector Features 64

Projecting Two Images Simultaneously ........................................ 65

Unsupported Input Source Combinations for Split Screen Projection..................... 67

Split Screen Projection Restrictions........................................................................................ 67

Projecting a PC Free Presentation.................................................. 68

Supported PC Free File Types................................................................................................... 68

Precautions on PC Free Projection ......................................................................................... 68

Starting a PC Free Slide Show .................................................................................................. 69

Starting a PC Free Movie Presentation ................................................................................. 70

PC Free Display Options ............................................................................................................. 71

Shutting Off the Image and Sound Temporarily .......................... 73

Stopping Video Action Temporarily .............................................. 74

Zooming In/Zooming Out of Images (E-Zoom)............................. 75

Zooming Into Images .................................................................................................................. 75

Zooming Out of Images.............................................................................................................. 75

Saving a User's Logo Image ............................................................ 77

Saving a User Pattern ...................................................................... 78

Color Difference Correction when Projecting from Multiple

Projectors.......................................................................................... 79

Setting the Projector ID .............................................................................................................. 79

Selecting the Projector You want to Operate .................................................................... 79

Matching Multiple-Projector Display Quality ..................................................................... 80

Projector Security Features............................................................. 82

Password Security Types ............................................................................................................ 82

Setting a Password.................................................................................................................. 82

Selecting Password Security Types................................................................................... 83

Entering a Password to Use the Projector ..................................................................... 84

Locking the Projector's Buttons............................................................................................... 84

Unlocking the Projector's Buttons .................................................................................... 85

Installing a Security Cable.......................................................................................................... 85

Using the Projector on a Network 87

Wired Network Projection............................................................... 88

Connecting to a Wired Network.............................................................................................. 88

Selecting Wired Network Settings .......................................................................................... 88

Wireless Network Projection........................................................... 91

Installing the Wireless LAN Module ....................................................................................... 91

Selecting Wireless Network Settings Manually.................................................................. 92

Selecting Wireless Network Settings in Windows ............................................................ 94

Selecting Wireless Network Settings in Mac....................................................................... 95

Setting Up Wireless Network Security................................................................................... 95

Supported Client and CA Certificates.............................................................................. 97

Using a QR Code to Connect a Mobile Device................................................................... 97

Using a USB Key to Connect a Windows Computer ........................................................ 98

Wireless Network Projection from a Mobile Device (Screen

Mirroring).......................................................................................... 99

Contents 4

Selecting Screen Mirroring Settings....................................................................................... 99

Connecting Using Screen Mirroring with the Miracast Function............................. 101

Connecting Using Screen Mirroring in Windows 10 ............................................... 101

Connecting Using Screen Mirroring in Windows 8.1 .............................................. 102

Secure HTTP.................................................................................... 104

Importing a Web Server Certificate Using the Menus .................................................. 104

Supported Web Server Certificates................................................................................ 105

Monitoring and Controlling the Projector 106

Epson Projector Management ...................................................... 107

Controlling a Networked Projector Using a Web Browser ........ 108

Web Control Options................................................................................................................. 109

Registering Digital Certificates from a Web Browser................. 112

Setting Up Projector Network E-Mail Alerts ............................... 113

Network Projector E-mail Alert Messages ......................................................................... 113

Setting Up Monitoring Using SNMP............................................. 115

Using ESC/VP21 Commands ........................................................ 116

ESC/VP21 Command List ......................................................................................................... 116

Cable Layouts ............................................................................................................................... 116

PJLink Support ............................................................................... 118

Crestron Connected Support........................................................ 119

Setting Up Crestron Connected Support........................................................................... 119

Controlling a Networked Projector Using Crestron Connected ............................... 119

Crestron Connected Operation Window ..................................................................... 121

Crestron Connected Tools Window ............................................................................... 122

Setting Projector Event Schedules............................................... 124

Adjusting the Menu Settings 127

Using the Projector's Menus ......................................................... 128

Using the Displayed Keyboard..................................................... 129

Available Text Using the Displayed Keyboard................................................................. 129

Image Quality Settings - Image Menu ......................................... 130

Input Signal Settings - Signal Menu............................................. 131

Projector Feature Settings - Settings Menu ................................ 132

Projector Setup Settings - Extended Menu ................................. 134

Projector Network Settings - Network Menu.............................. 137

Network Menu - Screen Mirroring Settings ...................................................................... 138

Network Menu - Basic Menu .................................................................................................. 139

Network Menu - Wireless LAN Menu .................................................................................. 140

Network Menu - Wired LAN Menu....................................................................................... 143

Network Menu - Notifications Menu................................................................................... 144

Network Menu - Others Menu............................................................................................... 145

Network Menu - Reset Menu.................................................................................................. 146

Projector Setup Settings - ECO Menu .......................................... 147

Projector Information Display - Info Menu ................................. 149

Info Menu - Projector Info Menu .......................................................................................... 149

Event ID Code List................................................................................................................. 150

Projector Reset Options - Reset Menu ......................................... 152

Copying Menu Settings Between Projectors (Batch Setup) ...... 153

Transferring Settings From a USB Flash Drive ................................................................. 153

Transferring Settings From a Computer ............................................................................ 154

Batch Setup Error Notification ......................................................................................... 155

Maintaining the Projector 156

Projector Maintenance .................................................................. 157

Cleaning the Lens........................................................................... 158

Cleaning the Projector Case.......................................................... 159

Air Filter and Vent Maintenance .................................................. 160

Contents 5

Cleaning the Air Filter and Vents.......................................................................................... 160

Replacing the Air Filter ............................................................................................................. 160

Projector Lamp Maintenance ....................................................... 163

Replacing the Lamp................................................................................................................... 163

Resetting the Lamp Timer ....................................................................................................... 166

Solving Problems 167

Projection Problems ...................................................................... 168

Projector Indicator Status ............................................................. 169

Using the Projector Help Displays................................................ 172

Solving Image or Sound Problems............................................... 173

Solutions When No Image Appears..................................................................................... 173

Solutions When Image is Incorrect Using the USB Display Function ..................... 173

Solutions When "No Signal" Message Appears............................................................... 174

Displaying From a Laptop.................................................................................................. 174

Displaying From a Mac Laptop........................................................................................ 174

Solutions When "Not Supported" Message Appears .................................................... 174

Solutions When Only a Partial Image Appears................................................................ 175

Solutions When the Image is not Rectangular................................................................ 175

Solutions When the Image Contains Noise or Static..................................................... 175

Solutions When the Image is Fuzzy or Blurry .................................................................. 176

Solutions When the Image Brightness or Colors are Incorrect ................................. 176

Solutions to Sound Problems................................................................................................. 177

Solutions When Image File Names are not Displayed Correctly in PC Free......... 177

Solving Projector or Remote Control Operation Problems....... 178

Solutions to Projector Power or Shut-Off Problems...................................................... 178

Solutions to Problems with the Remote Control............................................................ 178

Solutions to Password Problems........................................................................................... 179

Solution When "The Battery that Saves Your Clock Settings is Running Low"

Message Appears........................................................................................................................ 179

Solving Network Problems ........................................................... 180

Solutions When Wireless Authentication Fails ................................................................ 180

Solutions When You Cannot Access the Projector Through the Web ................... 180

Solutions When Network Alert E-Mails are not Received............................................ 180

Solutions When the Image Contains Static During Network Projection............... 181

Solutions When You Cannot Connect Using Screen Mirroring................................. 181

Solutions When the Image or Sound Contains Static During Screen Mirroring

Connection.................................................................................................................................... 181

Appendix 183

Optional Accessories and Replacement Parts............................. 184

Screens............................................................................................................................................ 184

Cables .............................................................................................................................................. 184

Mounts............................................................................................................................................ 184

For Wireless Connection .......................................................................................................... 184

External Devices .......................................................................................................................... 185

Replacement Parts...................................................................................................................... 185

Screen Size and Projection Distance............................................ 186

Supported Monitor Display Resolutions ..................................... 192

Projector Specifications ................................................................ 194

Connector Specifications ......................................................................................................... 198

External Dimensions...................................................................... 199

USB Display System Requirements .............................................. 203

List of Safety Symbols and Instructions ...................................... 204

Glossary .......................................................................................... 206

Notices ............................................................................................ 208

FCC Compliance Statement.................................................................................................... 208

Indication of the manufacturer and the importer in accordance with

requirements of EU directive.................................................................................................. 209

Restriction of Use........................................................................................................................ 209

Operating System References................................................................................................ 209

Trademarks.................................................................................................................................... 209

Contents 6

Copyright Notice......................................................................................................................... 210

Copyright Attribution................................................................................................................ 210

Notations Used in This Guide

Safety Symbols

The projector and its manuals use graphical symbols and labels to indicate content that tells you how to use the projector safely.

Read and carefully follow the instructions that are marked with these symbols and labels to avoid injury to persons or damage to property.

Warning

This symbol indicates information that, if ignored, could possibly result in personal injury or even death.

Caution

This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.

General Information Notations

Attention

This label indicates procedures that may result in damage or injury if sufficient care is not taken.

This label indicates additional information that may be useful to know.

[Button name] Indicates the name of the buttons on the remote control or the projector.

Example: [Esc] button

Menu/Setting name Indicates projector menu and setting names.

Example:

Select the Image menu

sImage >Advanced

This label indicates links to the related pages.

sThis label indicates the projector's current menu level.

gg Related Links

• "Using the Manual to Search for Information" p.8

• "Getting the Latest Version of the Documents" p.9

Using the Manual to Search for Information 8

The PDF manual allows you to search for information you are looking for by

keyword, or jump directly to specific sections using the bookmarks. You can

also print only the pages you need. This section explains how to use a PDF

manual that has been opened in Adobe Reader X on your computer.

gg Related Links

• "Searching by Keyword" p.8

• "Jumping Directly from Bookmarks" p.8

• "Printing Only the Pages You Need" p.8

Searching by Keyword

Click Edit >Advanced Search. Enter the keyword (text) for information you

want to find in the search window, and then click Search. Hits are displayed

as a list. Click one of the displayed hits to jump to that page.

Jumping Directly from Bookmarks

Click a title to jump to that page. Click +or >to view the lower level titles in

that section. To return to the previous page, perform the following operation

on your keyboard.

• Windows: Hold down Alt, and then press ←.

• Mac OS: Hold down the command key, and then press ←.

Printing Only the Pages You Need

You can extract and print only the pages you need. Click Print in the File

menu, and then specify the pages you want to print in Pages in Pages to

Print.

• To specify a series of pages, enter a hyphen between the start page and the

end page.

Example: 20-25

• To specify pages that are not in series, divide the pages with commas.

Example: 5, 10, 15

Getting the Latest Version of the Documents 9

You can get the latest version of the manuals and specifications on the Epson

Web site.

Visit epson.com/support, and enter your projector's name.

List of Functions

EB‑‑992F/EB‑‑982W/EB‑‑W49/EB‑‑FH52/EB‑‑W52/EB‑‑W51/EB‑‑FH06/EB‑‑W06

The following table lists the functions supported by each projector model. Supported functions are indicated by a "✓" mark.

EB-992F EB-982W EB-W49 EB-FH52 EB-W52 EB-W51 EB-FH06 EB-W06

Resolution Full HD WXGA WXGA Full HD WXGA WXGA Full HD WXGA

1920×1080 1280×800 1280×800 1920×1080 1280×800 1280×800 1920×1080 1280×800

Wired LAN ✓ ✓ ✓ - - - - -

Wireless LAN (built-in) ✓ - - ✓ ✓ - - -

Wireless LAN (optional) - ✓ ✓ - - ✓ ✓ ✓

Screen Mirroring ✓ - - ✓ - - - -

HDMI1/HDMI2 ports ✓ ✓ ✓ ✓ - - ✓ -

HDMI port - - - - ✓ ✓ - ✓

Computer1/Computer2 ports ✓ ✓ ✓ - - - - -

Computer port - - - ✓ ✓ ✓ ✓ ✓

Video port ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

USB-A port ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

USB-B port ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

L-Audio-R ports ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Audio 1/Audio 2 ports ✓ ✓ ✓ - - - - -

Mic port ✓ ✓ - - - - - -

Monitor Out port ✓ ✓ ✓ - - - - -

Audio Out port ✓ ✓ ✓ - - - - -

RS-232C port ✓ ✓ ✓ - - - - -

Lens cover ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Horizontal keystone slider ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Zoom ring ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Document camera (optional) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

EB-992F EB-982W EB-W49 EB-FH52 EB-W52 EB-W51 EB-FH06 EB-W06

Beep (Power on/Power off) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Date & Time setting ✓ - - ✓ - - - -

Schedule Settings ✓ - - ✓ - - - -

Auto V-Keystone ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

PC Free ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Power Consumption (3 levels) ✓ ✓ ✓ - - - - -

Power Consumption (2 levels) - - - ✓ ✓ ✓ ✓ ✓

Batch Setup (USB flash drive）✓✓✓✓✓✓✓✓

Batch Setup (USB cable）✓✓✓✓✓✓✓✓

User's Logo Protection ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Network Protection ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Schedule Protection ✓ - - ✓ - - - -

Screen Mirroring Protection ✓ - - ✓ - - - -

Epson iProjection ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Epson Projector Management ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Epson Web Control ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Mail Notification ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

SNMP ✓✓✓✓✓✓✓✓

Secure HTTP (HTTPS) ✓ - - ✓ - - - -

ESC/VP21 Commands ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

PJLink ✓ ✓ ✓ - - - - -

Crestron Connected ✓ ✓ ✓ - - - - -

EB‑‑972/EB‑‑118/EB‑‑X49/EB‑‑E20/EB‑‑X51/EB‑‑E10/EB‑‑X06/EB‑‑E01/EB‑‑X500/VS260

The following table lists the functions supported by each projector model. Supported functions are indicated by a "✓" mark.

EB-972 EB-118 EB-X49 EB-E20 EB-X51 EB-E10 EB-X06 EB-E01 EB-X500 VS260

Resolution XGA XGA XGA XGA XGA XGA XGA XGA XGA XGA

1024×768 1024×768 1024×768 1024×768 1024×768 1024×768 1024×768 1024×768 1024×768 1024×768

Wired LAN ✓ ✓ ✓ - - - - - - -

Wireless LAN (built-in) - - - - - - - - - -

Wireless LAN (optional) ✓ ✓ ✓ - ✓ - ✓ - ✓ -

Screen Mirroring - - - - - - - - - -

HDMI1/HDMI2 ports ✓ ✓ - - - - - - - -

HDMI port - - ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Computer1/Computer2

ports

✓ ✓ ✓ ✓ - - - - - -

Computer port - - - - ✓ ✓ ✓ ✓ ✓ ✓

Video port ✓ ✓ ✓ ✓ ✓ - ✓ - ✓ -

USB-A port ✓ ✓ ✓ - ✓ - ✓ - ✓ -

USB-B port ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

L-Audio-R ports ✓ ✓ ✓ ✓ ✓ - ✓ - ✓ -

Audio 1/Audio 2 ports ✓ ✓ ✓ ✓ - - - - - -

Mic port ✓ ✓ - - - - - - - -

Monitor Out port ✓ ✓ ✓ ✓ - - - - - -

Audio Out port ✓ ✓ ✓ ✓ - - - - - -

RS-232C port ✓ ✓ ✓ ✓ - - - - - -

Lens cover ✓ ✓ ✓ ✓ ✓ - ✓ - ✓ -

Horizontal keystone slider ✓ ✓ ✓ ✓ ✓ - ✓ - ✓ -

Zoom ring ✓ ✓ ✓ - ✓ - ✓ - ✓ -

Document camera

(optional)

✓ ✓ ✓ - ✓ - ✓ - ✓ -

Beep (Power on/Power off) ✓ ✓ ✓ - ✓ - ✓ - ✓ -

Date & Time setting - - - - - - - - - -

Schedule Settings - - - - - - - - - -

EB-972 EB-118 EB-X49 EB-E20 EB-X51 EB-E10 EB-X06 EB-E01 EB-X500 VS260

Auto V-Keystone ✓ ✓ ✓ - ✓ - ✓ - ✓ -

PC Free ✓ ✓ ✓ - ✓ - ✓ - ✓ -

Power Consumption (3

levels)

✓ ✓ - - - - - - - -

Power Consumption (2

levels)

- - ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Batch Setup (USB flash

drive）✓ ✓ ✓ - ✓ - ✓ - ✓ -

Batch Setup (USB cable）✓✓✓✓✓✓✓✓✓ ✓

User's Logo Protection ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Network Protection ✓ ✓ ✓ - ✓ - ✓ - ✓ -

Schedule Protection - - - - - - - - - -

Screen Mirroring Protection - - - - - - - - - -

Epson iProjection ✓ ✓ ✓ - ✓ - ✓ - ✓ -

Epson Projector

Management

✓ ✓ ✓ - ✓ - ✓ - ✓ -

Epson Web Control ✓ ✓ ✓ - ✓ - ✓ - ✓ -

Mail Notification ✓ ✓ ✓ - ✓ - ✓ - ✓ -

SNMP ✓ ✓ ✓ - ✓ - ✓ - ✓ -

Secure HTTP (HTTPS) - - - - - - - - - -

ESC/VP21 Commands ✓ ✓ ✓ - ✓ - ✓ - ✓ -

PJLink ✓ ✓ ✓ - - - - - - -

Crestron Connected ✓ ✓ ✓ - - - - - - -

Introduction to Your Projector

Refer to these sections to learn more about your projector's features and part names.

gg Related Links

• "Projector Features" p.15

• "Projector Parts and Functions" p.17

Projector Features 15

This projector comes with these special features. Refer to these sections for

more details.

gg Related Links

• "Quick and Easy Setup" p.15

• "Easy Wireless Projection" p.15

Quick and Easy Setup

• Direct Power On feature to turn on the projector as soon as you plug it in.

• Auto Power On feature to turn on the projector when the projector detects

an image signal from the port you specified as the Auto Power On source.

• Home screen feature to easily select an input source and useful functions.

• Automatic vertical keystone correction always displays a rectangular screen

(Auto V-Keystone).

• Horizontal keystone slider allows you to quickly correct horizontal

distortion in the projected image.

gg Related Links

• "Auto V-Keystone" p.50

• "Projector Setup Settings - Extended Menu" p.134

• "List of Functions" p.10

• "Turning On the Projector" p.39

• "Correcting the Image Shape with the Horizontal Keystone Slider" p.50

Easy Wireless Projection

• Screen Mirroring to connect your projector and mobile device wirelessly

using Miracast technology.

• Epson iProjection (Windows/Mac) to project up to four images at the same

time by splitting the projected screen. You can project images from

computers on the network, or from smartphones or tablet devices.

See the Epson iProjection Operation Guide (Windows/Mac) for details.

Projector Features 16

a• You can download the necessary software and manuals from the

following Web site:

http://www.epson.com/support

• Epson iProjection (iOS/Android) to connect your projector and mobile

device wirelessly using the app available on the App Store or Google Play.

aAny fees incurred when communicating with the App Store or

Google Play are the responsibility of the customer.

• Epson iProjection (Chromebook) to connect your projector and

Chromebook device wirelessly using the app available on the Chrome Web

Store.

aAny fees incurred when communicating with the Chrome Web Store

are the responsibility of the customer.

gg Related Links

• "List of Functions" p.10

• "Using the Projector on a Network" p.87

Projector Parts and Functions 17

The following sections explain the projector parts and their functions.

All of the features in this guide are explained using illustrations of EB-992F

unless otherwise mentioned.

gg Related Links

• "Projector Parts - Front" p.17

• "Projector Parts - Rear" p.18

• "Projector Parts - Base" p.19

• "Projector Parts - Control Panel" p.20

• "Projector Parts - Remote Control" p.21

• "List of Functions" p.10

Projector Parts - Front

Name Function

AAir exhaust vent Exhaust vent for air used to cool the projector

internally.

Name Function

Warning

Do not look into the vents. If the lamp

explodes, gases may escape and small

fragments of glass may be scattered which

could cause an injury. Contact a doctor if any

fragments of broken glass are inhaled or get

into the eyes or mouth.

Caution

While projecting, do not put your face or

hands near the air exhaust vent, and do not

place objects that may become warped or

damaged by heat near the vent. Hot air from

the air exhaust vent could cause burns,

warping, or accidents to occur.

BA/V Mute slide lever Slide the knob to open and close the lens cover.

CFoot release lever Press the foot release lever to extend and retract the

front adjustable foot.

DLens cover Close when not using the projector to protect the lens.

By closing it during projection you can hide the image

and the sound.

EFront adjustable foot When the projector is set up on a surface such as a

desk, extend the foot to adjust the position of the

image.

FLens Images are projected from here.

GRemote receiver Receives signals from the remote control.

HHorizontal keystone

slider

Corrects horizontal distortion in the projected image.

IAir intake vent (air

filter)

Takes in air to cool the projector internally.

JAir filter cover Open to access the air filter.

Projector Parts and Functions 18

Name Function

KSecurity slot The security slot is compatible with the Microsaver

Security System manufactured by Kensington.

LControl panel Operates the projector.

MZoom ring Adjusts the image size.

NFocus ring Adjusts the image focus.

The shape may vary depending on the model of your

projector.

OLamp cover Open to access the projector's lamp.

gg Related Links

• "Projector Indicator Status" p.169

• "List of Functions" p.10

• "Resizing the Image with the Zoom Ring" p.54

• "Focusing the Image Using the Focus Ring" p.55

• "Correcting the Image Shape with the Horizontal Keystone Slider" p.50

Projector Parts - Rear

EB‑‑E01/VS260

Name Function

APower inlet Connects the power cord to the projector.

BRS-232C port Connects an RS-232C cable to control the projector

from a computer. (You do not need to use this port

normally.)

CVideo port Inputs composite video signals from video sources.

DMic port Inputs audio from the microphone.

EL-Audio-R ports Inputs audio from equipment connected to the Video

port.

FMonitor Out port Outputs analog RGB signals input from the Computer1

port to an external monitor. You cannot output signals

input from other ports.

GAudio 1 port Inputs audio from equipment connected to the

Computer1 port.

HAudio Out port Outputs audio from the current input source or Mic

port to an external speaker.

IAudio 2 port Inputs audio from equipment connected to the

Computer2 port.

JComputer2 port Inputs image signals from a computer.

KSpeaker Outputs audio.

LHDMI1, HDMI2

ports

HDMI port

Inputs video signals from HDMI compatible video

equipment and computers.

This projector is compatible with HDCP.

Projector Parts and Functions 19

Name Function

MComputer port

Computer1 port

Inputs image signals from a computer.

NLAN port Connects a LAN cable to connect to a network.

OUSB-B port Connects a USB cable to the computer to project

computer images.

PUSB-A port Connects a USB memory device or a digital camera

and projects movies or images using PC Free.

Connects the optional document camera.

Connects the wireless LAN module.

QWireless LAN module

fixing screw

Secures the wireless LAN module cover.

RRemote receiver Receives signals from the remote control.

gg Related Links

• "List of Functions" p.10

Projector Parts - Base

Name Function

ACeiling mount fixing

points (three points)

Attach the optional ceiling mount here when

suspending the projector from a ceiling.

BSecurity cable

attachment point

Pass a commercially available wire lock through here

and lock it in place.

You can also attach the optional safety wire here to

prevent the projector from falling from the ceiling or

wall.

Projector Parts and Functions 20

Name Function

CRear feet When the projector is set up on a surface such as a

desk, turn to extend and retract the feet to adjust the

horizontal tilt.

DFront adjustable foot When the projector is set up on a surface such as a

desk, extend the foot to adjust the position of the

image.

gg Related Links

• "Installing a Security Cable" p.85

Projector Parts - Control Panel

EB‑‑E20/EB‑‑E10/EB‑‑E01/VS260

Name Function

A[Source Search]

button

Switches to the next input source.

B[Enter] button [ ] Enters the current selection and moves to the next level

while displaying the projector's menu or help.

Optimizes Tracking,Sync., and Position in the

projector's Signal menu while projecting an analog

RGB signal from the Computer port.

CKeystone adjustment

buttons and arrow

buttons

Displays the Keystone screen allowing you to correct

keystone distortion.

Selects menu items while displaying the projector's

menu or help.

D[Esc] button Stops the current function.

Moves back to the previous menu level while

displaying the projector's menu.

Projector Parts and Functions 21

Name Function

EVolume buttons and

arrow buttons : Decreases the volume.

: Increases the volume.

Corrects keystone distortion in the horizontal direction

when the Keystone screen is displayed.

Selects menu items while displaying the projector's

menu or help.

F[Menu] button Displays and closes the projector's menu.

G[Home] button Displays and closes the Home screen.

HPower button [ ] Turns the projector on or off.

IIndicators Indicates the projector's status.

gg Related Links

• "Input Signal Settings - Signal Menu" p.131

• "Home Screen" p.40

• "Projector Indicator Status" p.169

• "Correcting the Image Shape with the Keystone Buttons" p.51

Projector Parts - Remote Control

Projector Parts and Functions 22

Name Function

APower button [ ] Turns the projector on or off.

B[HDMI] button Switches the image source between the HDMI ports.

C[Computer] button Switches the image source to the Computer ports.

DNumeric buttons Enters numbers in the projector's menu while holding

down the [Num] button.

E[Auto] button Optimizes Tracking,Sync., and Position in the

projector's Signal menu while projecting an analog

RGB signal from the Computer ports.

F[Num] button Hold down this button to enter numbers using the

numeric buttons.

G[Menu] button Displays and closes the projector's menu.

HArrow buttons Selects menu items while displaying the projector's

menu.

I[Enter] button [ ] Enters the current selection and moves to the next level

while displaying the projector's menu.

J[User] button Performs settings assigned in the User Button setting

in the projector's Settings menu.

K[Color Mode] button Changes the color mode.

L[Aspect] button Changes the aspect mode.

M[E-Zoom] +/–

buttons

Resizes the projected image.

N[A/V Mute] button Turns the video and audio on or off temporarily.

O[Split] button Projects two images from different image sources

simultaneously by splitting the projected screen.

P[Home] button Displays and closes the Home screen.

Q[Freeze] button Pauses or resumes images.

R[Volume] up/down

buttons

Adjusts the speaker volume.

S[Default] button Returns the selected setting to its default value.

Name Function

T[Esc] button Stops the current function.

Moves back to the previous menu level while

displaying the projector's menu.

U[ID] button Hold down this button and press the numeric buttons

to select the ID for the projector you want to operate

using the remote control.

V[LAN] button Switches the image source between the network

connected devices.

W[USB] button Switches the image source between the USB Display

and USB-A port.

X[Source Search]

button

Switches to the next input source.

YRemote control light

emitting area

Outputs remote control signals.

gg Related Links

• "Image Aspect Ratio" p.58

• "Adjusting Image Quality (Color Mode)" p.61

• "Input Signal Settings - Signal Menu" p.131

• "Projector Setup Settings - Extended Menu" p.134

• "Home Screen" p.40

• "Projecting Two Images Simultaneously" p.65

• "Connecting to a Computer for USB Video and Audio" p.28

• "Projecting a PC Free Presentation" p.68

• "Using the Projector on a Network" p.87

Setting Up the Projector

Follow the instructions in these sections to set up your projector.

gg Related Links

• "Projector Placement" p.24

• "Projector Connections" p.27

• "Installing Batteries in the Remote Control" p.35

• "Remote Control Operation" p.36

• "Opening the Lens Cover" p.37

Projector Placement 24

You can place the projector on almost any flat surface to project an image.

You can also install the projector in a ceiling mount if you want to use it in a

fixed location. An optional ceiling mount is required when suspending the

projector from a ceiling.

Note the following points when selecting a projector location:

• Place the projector on a sturdy, level surface or install it using a compatible

mount.

• Leave plenty of space around and under the projector for ventilation, and

do not place it on top of or next to anything that could block the vents.

• Place the projector so it squarely faces the screen, not at an angle.

aIf you cannot install the projector squarely facing the screen, correct

any resulting keystone distortion using the projector controls. For the

best quality images, we recommend adjusting the installation position

of the projector to achieve the correct image size and shape.

Warning

• You must install a ceiling mount when suspending the projector from a ceiling.

If you do not install the projector correctly, it could fall and cause damage or

injury.

• Do not use adhesives on the ceiling mount fixing points to prevent the screws

from loosening, or use lubricants, oils, or similar substances on the projector; the

projector case may crack causing it to fall from its ceiling mount. This could

cause serious injury to anyone under the ceiling mount and could damage the

projector.

• Failure to install the ceiling mount and projector may cause the projector to fall.

After installing the specific Epson mount that supports your projector, make

sure you secure the mount to all of the projector's ceiling mount fixing points.

Also, secure the projector and the mounts using wire that is strong enough to

hold their weight.

• Do not install the projector in a location subject to high levels of dust or

humidity, or in a location subject to smoke or steam. Otherwise, it could cause a

fire or electric shock to occur. The projector's case could also deteriorate and be

damaged causing the projector to fall from the mount.

Examples of environments that could cause the projector to fall due to case

deterioration

• Locations subject to excessive smoke or airborne oil particles, such as factories

or kitchens

• Locations containing volatile solvents or chemicals, such as factories or

laboratories

• Locations where the projector could be subjected to detergents or chemicals,

such as factories or kitchens

• Locations in which aroma oils are often used, such as relaxation rooms

• Near devices that produce excessive smoke, airborne oil particles, or foam at

events

Projector Placement 25

Warning

• Do not cover the projector's air intake or air exhaust vents. If the vents are

covered, the internal temperature could rise and cause a fire.

• Do not use or store the projector in locations where it will be subject to dust or

dirt. Otherwise, the quality of the projected image may decline, or the air filter

may become clogged, resulting in a malfunction or fire.

• Do not install the projector on an unstable surface or in a location beyond the

weight specifications of the projector. Otherwise, it could fall or topple causing

an accident and injury.

• When installing the projector in a high position, take measures to prevent falling

by using wires to ensure safety in an emergency, such as an earthquake, and to

prevent accidents. If it is not installed correctly, it could fall causing an accident

and injury.

• Do not install in locations where salt damage could occur, or in locations subject

to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion

could cause the projector to fall. It could also cause the projector to malfunction.

Attention

• Do not operate the projector on its side. This may cause the projector to

malfunction.

• If you are using the projector at altitudes above 1,500 m, set the High Altitude

Mode setting to On in the projector's menu to ensure the projector's internal

temperature is regulated properly.

sExtended >Operation >High Altitude Mode

• Try not to setup the projector in locations subject to high humidity and dust, or

in locations subject to smoke from fires or tobacco smoke.

gg Related Links

• "Projector Setup and Installation Options" p.25

• "Projection Distance" p.25

• "Image Shape" p.50

• "Projector Setup Settings - Extended Menu" p.134

Projector Setup and Installation Options

You can set up or install your projector in the following ways:

Front/Rear

Front Ceiling/Rear Ceiling

Make sure you select the correct Projection option in the projector's

Extended menu according to the installation method being used.

gg Related Links

• "Projection Modes" p.46

Projection Distance

The distance at which you place the projector from the screen determines the

approximate size of the image. The image size increases the farther the

Projector Placement 26

projector is from the screen, but can vary depending on the zoom factor,

aspect ratio, and other settings.

See the Appendix for details about how far to place the projector from the

screen based on the size of the projected image.

aWhen correcting keystone distortion, your image is slightly smaller.

gg Related Links

• "Screen Size and Projection Distance" p.186

Projector Connections 27

See these sections to connect the projector to a variety of projection sources.

Attention

Check the shape and orientation of the connectors on any cable you plan to

connect. Do not force a connector into a port if it does not fit. The device or your

projector could be damaged or could malfunction.

aSee the Quick Start Guide for a list of cables supplied with your

projector. Purchase optional or commercially available cables when

necessary.

gg Related Links

• "Connecting to a Computer" p.27

• "Connecting to Video Sources" p.29

• "Connecting to External USB Devices" p.31

• "Connecting to a Document Camera" p.32

• "Connecting to External Devices" p.32

Connecting to a Computer

Follow the instructions in these sections to connect a computer to the

projector.

gg Related Links

• "Connecting to a Computer for VGA Video and Audio" p.27

• "Connecting to a Computer for USB Video and Audio" p.28

• "Connecting to a Computer for HDMI Video and Audio" p.29

Connecting to a Computer for VGA Video and Audio

You can connect the projector to your computer using a VGA computer

cable.

You can play sound through the projector's speaker system by connecting a

commercially available 3.5 mm stereo mini-jack audio cable.

a• To connect a computer that does not have a VGA video port, you

need an adapter that allows you to connect to the projector's VGA

video port.

• You can also set the port used for audio input in the projector's

Extended menu.

sExtended >A/V Settings >Audio Settings >Audio Output

• Make sure the audio cable is labeled "No resistance".

aConnect the VGA computer cable to your computer's monitor port.

bConnect the other end to a Computer port on the projector.

cTighten the screws on the VGA connector.

dConnect the audio cable to your laptop's headphone or audio-out jack,

or your desktop's speaker or audio-out port.

Projector Connections 28

eConnect the other end to the Audio port that corresponds to the

Computer port you are using.

gg Related Links

• "Projector Setup Settings - Extended Menu" p.134

• "List of Functions" p.10

Connecting to a Computer for USB Video and Audio

If your computer meets the system requirements, you can send video and

audio output to the projector through the computer's USB port. This function

is called USB Display. Connect the projector to your computer using a USB

cable.

a• If you use a USB hub, the connection may not operate correctly.

Connect the USB cable directly to the projector.

aConnect the cable to your projector's USB-B port.

bConnect the other end to any available USB port on your computer.

cTurn on the projector and your computer.

dDo one of the following to install the Epson USB Display software:

aYou only need to install this software the first time you connect

the projector to the computer.

• Windows: Select Run EMP_UDSE.EXE in the dialog box that is

displayed to install the Epson USB Display software.

• Mac: The Epson USB Display setup folder is displayed on your

screen. Select USB Display Installer and follow the on-screen

instructions to install the Epson USB Display software. If the USB

Display Setup folder is not displayed automatically, double-click

EPSON_PJ_UD >USB Display Installer.

eFollow any on-screen instructions.

Do not disconnect the USB cable or turn off the projector until the

projector displays an image.

The projector displays the image from your computer's desktop and outputs

sound if your presentation contains audio.

Projector Connections 29

a• If the projector does not project any images, do one of the following:

• Windows: Click All Programs >EPSON Projector >Epson USB

Display >Epson USB Display Ver.x.xx.

• Mac: Double-click the USB Display icon in the Application folder.

• When you finish projection, do one of the following:

• Windows: Disconnect the USB cable. You do not need to operate

Safely Remove Hardware.

• Mac: Select Disconnect from the USB Display icon menu on the

menu bar or Dock, and then disconnect the USB cable.

gg Related Links

• "USB Display System Requirements" p.203

• "List of Functions" p.10

Connecting to a Computer for HDMI Video and Audio

If your computer has an HDMI port, you can connect it to the projector using

an HDMI cable and send the computer's audio with the projected image.

aTo connect a Mac that does not have an HDMI port, you need an

adapter that allows you to connect to the projector's HDMI port.

Contact Apple for compatible adapter options. Older Mac computers

(2009 and earlier) may not support audio through the HDMI port.

aConnect the HDMI cable to your computer's HDMI output port.

bConnect the other end to the projector's HDMI port.

aIf you have problems hearing audio through the HDMI connection,

connect one end of a commercially available 3.5 mm stereo mini-jack

audio cable to the projector's Audio port and the other end to your

computer's audio out port. Select the audio input port you connected

to in the projector's Extended menu.

sExtended >A/V Settings >Audio Settings >HDMI Audio

Output

sExtended >A/V Settings >Audio Settings >HDMI1 Audio

Output

sExtended >A/V Settings >Audio Settings >HDMI2 Audio

Output

gg Related Links

• "Projector Setup Settings - Extended Menu" p.134

• "List of Functions" p.10

Connecting to Video Sources

Follow the instructions in these sections to connect video devices to the

projector.

Projector Connections 30

a• If the port on the device you connect has an unusual shape, use the

cable supplied with the device or an optional cable to connect to the

projector.

• The cable differs depending on the output signal from the connected

video devices.

• Some video devices are capable of outputting different types of

signals. See your video device manual to confirm what type of signals

can be output.

gg Related Links

• "Connecting to an HDMI Video Source" p.30

• "Connecting to a Composite Video Source" p.30

Connecting to an HDMI Video Source

If your video source has an HDMI port, you can connect it to the projector

using an HDMI cable and send the image source's audio with the projected

image.

Attention

Do not turn on the video source before connecting it to the projector. Doing so

could damage the projector.

aConnect the HDMI cable to your video source's HDMI output port.

bConnect the other end to the projector's HDMI port.

aIf you have problems hearing audio through the HDMI connection,

connect one end of a commercially available 3.5 mm stereo mini-jack

audio cable to the projector's Audio port and the other end to your

video source's audio out port. Select the audio input port you

connected to in the projector's Extended menu.

sExtended >A/V Settings >Audio Settings >HDMI Audio

Output

sExtended >A/V Settings >Audio Settings >HDMI1 Audio

Output

sExtended >A/V Settings >Audio Settings >HDMI2 Audio

Output

gg Related Links

• "Projector Setup Settings - Extended Menu" p.134

• "List of Functions" p.10

Connecting to a Composite Video Source

If your video source has a composite video port, you can connect it to the

projector using a RCA-style video or A/V cable.

You can play sound through the projector's speaker system by connecting a

commercially available RCA audio cable.

aMake sure the audio cable is labeled "No resistance".

aConnect the cable with the yellow connector to your video source's

yellow video output port.

Projector Connections 31

bConnect the other end to the projector's Video port.

cConnect the audio cable to your video source's audio-out ports.

dConnect the other end to the projector's L-Audio-R ports.

gg Related Links

• "List of Functions" p.10

Connecting to External USB Devices

Follow the instructions in these sections to connect external USB devices to

the projector.

gg Related Links

• "USB Device Projection" p.31

• "Connecting to a USB Device" p.31

• "Disconnecting a USB Device" p.32

USB Device Projection

You can project images and other content without using a computer or video

device by connecting any of these devices to your projector:

• USB flash drive

• Digital camera or smartphone

• USB hard drive

a• Digital cameras or smartphones must be USB-mounted devices, not

TWAIN-compliant devices, and must be USB Mass Storage Class-

compliant.

• USB hard drives must meet these requirements:

• USB Mass Storage Class-compliant (not all USB Mass Storage

Class devices are supported)

• Formatted in FAT16/32

• Self-powered by their own AC power supplies (bus-powered hard

drives are not recommended)

• Avoid using hard drives with multiple partitions

You can project slide shows from image files on a connected USB device.

gg Related Links

• "List of Functions" p.10

• "Projecting a PC Free Presentation" p.68

Connecting to a USB Device

You can connect your USB device to the projector's USB-A port and use it to

project images and other content.

aIf your USB device came with a power adapter, plug the device into an

electrical outlet.

Projector Connections 32

bConnect the USB cable or USB flash drive to the projector's USB-A port

as shown.

Attention

• Use the USB cable supplied with or specified for use with the device.

• Do not connect a USB hub or a USB cable longer than 3 meters, or the

device may not operate correctly.

cConnect the other end to your device, if necessary.

gg Related Links

• "List of Functions" p.10

Disconnecting a USB Device

When you have finished presenting with a connected USB device, disconnect

the device from the projector.

aTurn off and unplug the device, if necessary.

bDisconnect the USB device from the projector.

Connecting to a Document Camera

You can connect a document camera to your projector to project images

viewed by the camera.

The connection method varies depending on your Epson document camera

model. See the document camera manual for details.

gg Related Links

• "List of Functions" p.10

Connecting to External Devices

Follow the instructions in these sections to connect external devices to the

projector.

gg Related Links

• "Connecting to a VGA Monitor" p.32

• "Connecting to External Speakers" p.33

• "Connecting a Microphone" p.34

Connecting to a VGA Monitor

If you connected the projector to a computer using a Computer port, you can

also connect an external monitor to the projector. This lets you see your

presentation on the external monitor even when the projected image is not

visible.

a• If you want to output images to an external monitor when the

projector is turned off, select Always On as the A/V Output setting

in the projector's Extended menu.

sExtended >A/V Settings >A/V Output

• Monitors that use a refresh rate of less than 60 Hz may not be able to

display images correctly.

aMake sure your computer is connected to the projector's Computer

port.

Projector Connections 33

a• If there are two computer ports, make sure you use the

Computer1 port.

• Only analog RGB signals from the Computer1 port can be

output to an external monitor. You cannot output signals

input from other ports.

bConnect the external monitor's cable to your projector's Monitor Out

port.

gg Related Links

• "Projector Setup Settings - Extended Menu" p.134

• "List of Functions" p.10

Connecting to External Speakers

To enhance the sound from your presentation, you can connect the projector

to external self-powered speakers. You can control the volume using the

projector's remote control.

a• If you want to output audio from the external speakers when the

projector is turned off, select Always On as the A/V Output setting

in the projector's Extended menu.

sExtended >A/V Settings >A/V Output

• You can also connect the projector to an amplifier with speakers.

• The projector's built-in speaker system is disabled when you connect

external speakers.

aMake sure your computer or video source is connected to the projector

with both audio and video cables as necessary.

bLocate the appropriate cable to connect your external speakers, such as

a stereo mini-jack-to-pin-jack cable, or another type of cable or adapter.

cConnect one end of the cable to your external speakers as necessary.

dConnect the stereo mini-jack end of the cable to your projector's Audio

Out port.

gg Related Links

• "Projector Setup Settings - Extended Menu" p.134

• "List of Functions" p.10

Projector Connections 34

Connecting a Microphone

You can connect a microphone to the projector's Mic port to provide audio

support during presentations.

a• Plug-in-power is not supported.

• If you want to output audio from a microphone when the projector

is turned off, select Always On as the A/V Output setting in the

projector's Extended menu.

sExtended >A/V Settings >A/V Output

• Adjust Mic Input Level if the microphone audio is difficult to hear,

or if it is too loud resulting in a crackling sound.

sSettings >Mic Input Level

aConnect the microphone cable to the projector's Mic port.

bTurn on the microphone, if necessary.

gg Related Links

• "Projector Setup Settings - Extended Menu" p.134

• "Projector Feature Settings - Settings Menu" p.132

• "List of Functions" p.10

Installing Batteries in the Remote Control 35

The remote control uses the two AA batteries that came with the projector.

Attention

Make sure you read the safety instructions in the online Notices before handling

the batteries.

aRemove the battery cover as shown.

bRemove the old batteries, if necessary.

aDispose of used batteries according to local regulations.

cInsert the batteries with the +and –ends facing as shown.

Warning

Check the positions of the (+) and (–) marks inside the battery holder to

ensure the batteries are inserted the correct way. If the batteries are not used

correctly, they could explode or leak causing a fire, injury, or damage to the

product.

dReplace the battery cover and press it down until it clicks into place.

Remote Control Operation 36

The remote control lets you control the projector from almost anywhere in

the room.

Make sure that you aim the remote control at the projector's receivers within

the distance and angles listed here.

EB‑‑E20/EB‑‑E10/EB‑‑E01/VS260

aAvoid using the remote control in conditions with bright fluorescent

lights or in direct sunlight, or the projector may not respond to

commands. If you are not going to use the remote control for a long

time, remove the batteries.

Opening the Lens Cover 37

aTo open the projector's lens cover, slide the A/V Mute slide lever until

it clicks.

bTo cover the lens or temporarily turn off the projected image and

sound, close the lens cover.

aThe projector's power automatically turns off 30 minutes after A/V

Mute is enabled. You can disable this feature.

sECO >Lens Cover Timer

gg Related Links

• "List of Functions" p.10

Using Basic Projector Features

Follow the instructions in these sections to use your projector's basic features.

gg Related Links

• "Turning On the Projector" p.39

• "Turning Off the Projector" p.42

• "Setting the Date and Time" p.43

• "Selecting the Language for the Projector Menus" p.45

• "Projection Modes" p.46

• "Displaying a Test Pattern" p.48

• "Adjusting the Image Height" p.49

• "Image Shape" p.50

• "Resizing the Image with the Zoom Ring" p.54

• "Focusing the Image Using the Focus Ring" p.55

• "Selecting an Image Source" p.56

• "Image Aspect Ratio" p.58

• "Adjusting Image Quality (Color Mode)" p.61

• "Controlling the Volume with the Volume Buttons" p.63

Turning On the Projector 39

Turn on the computer or video equipment you want to use after you turn on

the projector.

aConnect the power cord to the projector's power inlet and plug it into

an electrical outlet.

The projector's power indicator turns blue. This indicates that the

projector is receiving power, but is not yet turned on (it is in standby

mode).

bPress the power button on the control panel or remote control to turn

on the projector.

The projector beeps and the status indicator flashes blue as the

projector warms up. Once the projector is warmed up, the status

indicator stops flashing and turns blue.

cOpen the projector's lens cover.

Try the following if you do not see a projected image.

• Verify the lens cover is open all the way.

• Turn on the connected computer or video device.

• Change the screen output from the computer when using a laptop

computer.

• Insert a DVD or other video media, and press play (if necessary).

• Press the [Source Search] button on the control panel or remote control to

detect the source.

• Press the button for the desired video source on the remote control.

• If the Home screen is displayed, select the source you want to project.

Turning On the Projector 40

Warning

• Never look into the projector lens when the lamp is on. This can damage your

eyes and is especially dangerous for children.

• When turning on the projector at a distance using the remote control, make sure

there is no one looking into the lens.

• During projection, do not block the light from the projector with a book or other

objects. If the light from the projector is blocked, the area on which the light

shines becomes hot which could cause it to melt, burn, or start a fire. Also, the

lens may get hot due to the reflected light which could cause the projector to

malfunction. To stop projection, use the A/V Mute function, or turn off the

projector.

• A mercury lamp with high internal pressure is used as the projector's light

source. If the lamp is subjected to vibrations or shocks, or if it is used for an

overly extended length of time, the lamp may break or it may not turn on. If the

lamp explodes, gases may escape and small fragments of glass may be scattered

which could cause an injury. Be sure to observe the instructions below.

• Do not disassemble or damage the lamp or subject it to any impacts.

• Do not bring your face close to the projector while it is in use.

• Particular care should be taken when the projector is installed to a ceiling, as

small pieces of glass may fall down when the lamp cover is removed. When

cleaning the projector or replacing the lamp yourself, be very careful not to

allow such pieces of glass to get into the eyes or mouth.

If the lamp breaks, ventilate the area immediately, and contact a doctor if any

fragments of broken glass are inhaled or get into the eyes or mouth.

a• When the Direct Power On setting is set to On in the projector's

Extended menu, the projector turns on as soon as you plug it in.

Note that the projector also turns on automatically in cases such as

recovery from a power outage.

sExtended >Operation >Direct Power On

• If you select a specific port as the Auto Power On setting in the

projector's Extended menu, the projector turns on as soon as it

detects a signal or cable connection from that port.

sExtended >Operation >Auto Power On

gg Related Links

• "Home Screen" p.40

• "Projector Setup Settings - Extended Menu" p.134

• "List of Functions" p.10

Home Screen

The Home screen feature allows you to easily select an image source and

access useful functions. You can display the Home screen by pressing the

[Home] button on the control panel or remote control. The Home screen is

also displayed when you turn on the projector and no signal is being input.

Press the arrow buttons on the control panel or remote control to select a

menu item, and then press [Enter].

ASelects the source you want to project.

BDisplays the Connection Guide. You can select the wireless connection methods

according to the devices you are using, such as smartphones or computers.

CDisplays the Help screen.

DDisplays the projector's menu.

Turning On the Projector 41

EPerforms menu options assigned to Home Screen in the projector's Extended

menu.

FProjects two images from different image sources simultaneously by splitting

the projected screen.

GCorrects the shape of an image that is an uneven rectangle.

aThe Home screen disappears after 10 minutes of inactivity.

gg Related Links

• "Image Shape" p.50

• "Projector Setup Settings - Extended Menu" p.134

• "List of Functions" p.10

• "Using the Projector's Menus" p.128

• "Using the Projector Help Displays" p.172

• "Projecting Two Images Simultaneously" p.65

Turning Off the Projector 42

Turn off the projector after use.

a• Turn off this product when it is not in use to prolong the life of the

projector. Lamp life varies depending on the mode selected,

environmental conditions, and usage. Brightness decreases over time.

• Since the projector supports the direct shutdown feature, it can be

turned off directly using the breaker.

aPress the power button on the control panel or remote control.

The projector displays a shutdown confirmation screen.

bPress the power button again. (To leave it on, press any other button.)

The projected image disappears, the projector beeps twice, and the

status indicator turns off.

aWith Epson's Instant Off technology, there is no cool-down

period so you can pack up the projector for transport right away.

cTo transport or store the projector, make sure the power indicator is

blue (but not flashing) and the status indicator is off, then unplug the

power cord.

dClose the projector's lens cover.

gg Related Links

• "List of Functions" p.10

Setting the Date and Time 43

You can set the date and time for the projector.

aTurn on the projector.

bPress the [Menu] button on the control panel or remote control.

cSelect the Extended menu and press [Enter].

dSelect the Operation setting and press [Enter].

eSelect the Date & Time setting and press [Enter].

You see this screen:

fSelect the Date & Time setting and press [Enter].

You see this screen:

gSelect Date, press [Enter], and use the displayed keyboard to enter

today's date.

hSelect Time, press [Enter], and use the displayed keyboard to enter the

current time.

iSelect Time Difference (UTC), press [Enter], and set the time

difference from Coordinated Universal Time.

jWhen you are finished, select Set and press [Enter].

kTo activate daylight saving time, select the Daylight Saving Time

setting and press [Enter]. Then select settings.

lWhen you are finished, select Set and press [Enter].

Setting the Date and Time 44

mTo update the time automatically through an Internet time server,

select the Internet Time setting and press [Enter]. Then select settings.

nWhen you are finished, select Set and press [Enter].

oPress [Menu] or [Esc] to exit the menus.

gg Related Links

• "List of Functions" p.10

Selecting the Language for the Projector Menus 45

If you want to view the projector's menus and messages in another language,

you can change the Language setting.

aTurn on the projector.

bPress the [Menu] button on the control panel or remote control.

cSelect the Extended menu and press [Enter].

dSelect the Language setting and press [Enter].

eSelect the language you want to use and press [Enter].

fPress [Menu] or [Esc] to exit the menus.

Projection Modes 46

Depending on how you positioned the projector, you may need to change the

projection mode so your images project correctly.

•Front lets you project from a table in front of the screen.

•Front/Ceiling flips the image over top-to-bottom to project upside-down

from a ceiling or wall mount.

•Rear flips the image horizontally to project from behind a translucent

screen.

•Rear/Ceiling flips the image over top-to-bottom and horizontally to project

from a ceiling or wall mount and behind a translucent screen.

gg Related Links

• "Changing the Projection Mode Using the Remote Control" p.46

• "Changing the Projection Mode Using the Menus" p.46

• "Projector Setup and Installation Options" p.25

Changing the Projection Mode Using the Remote

Control

You can change the projection mode to flip the image over top-to-bottom.

aTurn on the projector and display an image.

bHold down the [A/V Mute] button on the remote control for 5 seconds.

The image disappears briefly and reappears flipped top-to-bottom.

cTo change projection back to the original mode, hold down the [A/V

Mute] button for 5 seconds again.

Changing the Projection Mode Using the Menus

You can change the projection mode to flip the image over top-to-bottom

and/or left-to-right using the projector menus.

aTurn on the projector and display an image.

bPress the [Menu] button on the control panel or remote control.

cSelect the Extended menu and press [Enter].

dSelect Projection and press [Enter].

Projection Modes 47

eSelect a projection mode and press [Enter].

fPress [Menu] or [Esc] to exit the menus.

Displaying a Test Pattern 48

You can display a test pattern to adjust the projected image without

connecting a computer or video device.

aTo set menu items that cannot be set while the test pattern is being

displayed or to fine-tune the projected image, project an image from

the connected device.

aTurn on the projector.

bPress the [Menu] button on the control panel or remote control.

cSelect the Settings menu and press [Enter].

dSelect Pattern >Test Pattern, and press [Enter].

The test pattern is displayed.

eAdjust the image as necessary.

fPress [Esc] to clear the test pattern.

Adjusting the Image Height 49

If you are projecting from a table or other flat surface and the image is too

high or low, you can adjust the image height using the projector's adjustable

feet.

The larger the angle of tilt, the harder it becomes to focus. Locate the

projector so that it only needs to be tilted at a small angle.

aTurn on the projector and display an image.

bTo adjust the front foot, pull up on the foot release lever and lift the

front of the projector.

The foot extends from the projector.

You can adjust the position up to approximately 12 degrees.

cRelease the lever to lock the foot.

dIf the image is tilted, rotate the rear feet to adjust their height.

AExtend the rear foot

BRetract the rear foot

If the projected image is unevenly rectangular, you need to adjust the image

shape.

gg Related Links

• "Image Shape" p.50

Image Shape 50

You can project an even, rectangular image by placing the projector directly

in front of the center of the screen and keeping it level. If you place the

projector at an angle to the screen, or tilt it up or down, or off to the side, you

may need to correct the image shape.

After correction, your image is slightly smaller.

For the best quality images, we recommend adjusting the installation position

of the projector to achieve the correct image size and shape.

gg Related Links

• "Auto V-Keystone" p.50

• "Correcting the Image Shape with the Horizontal Keystone Slider" p.50

• "Correcting the Image Shape with the Keystone Buttons" p.51

• "Correcting the Image Shape with Quick Corner" p.52

Auto V-Keystone

When the projector is moved or tilted, Auto V-Keystone automatically

corrects any vertical keystone distortion.

Auto V-Keystone can correct the projected image distortion in these

conditions:

• Projection angle is about 30º up or down

• The Projection setting is set to Front in the projector's Extended menu

a• If you do not want to use the Auto V-Keystone function, set Auto

V-Keystone to Off in the projector's menu.

sSettings >Keystone >H/V-Keystone >Auto V-Keystone

gg Related Links

• "Projection Modes" p.46

• "Projector Setup Settings - Extended Menu" p.134

• "Projector Feature Settings - Settings Menu" p.132

• "List of Functions" p.10

Correcting the Image Shape with the Horizontal

Keystone Slider

You can use the projector's horizontal keystone slider to correct the shape of

an image that is an uneven horizontal rectangle, such as when the projector is

placed to the side of the projection area. (Available only for models that have

the horizontal keystone slider.)

You can make effective corrections when the projection angle is about 30º

right or left.

aTurn on the projector and display an image.

bAdjust the slider until the image is an even rectangle.

After correction, your image is slightly smaller.

a• When you use the horizontal keystone slider, set H-Keystone

Adjuster to On in the projector's Settings menu.

sSettings >Keystone >H/V-Keystone >H-Keystone

Adjuster

• You can also correct the shape of the image in the horizontal

direction in the projector's Settings menu.

sSettings >Keystone >H/V-Keystone

gg Related Links

• "Projector Feature Settings - Settings Menu" p.132

• "List of Functions" p.10

Image Shape 51

Correcting the Image Shape with the Keystone

Buttons

You can use the projector's keystone correction buttons to correct the shape

of an image that is unevenly rectangular.

You can use keystone buttons to correct images up to 30º right, left, up, or

down.

aTurn on the projector and display an image.

bPress one of the keystone adjustment buttons on the control panel to

display the Keystone adjustment screen.

cPress a keystone button to adjust the image shape.

a• If the projector is installed out of your reach, you can also correct the

shape of the image using the remote control.

sSettings >Keystone >H/V-Keystone

gg Related Links

• "Projector Feature Settings - Settings Menu" p.132

Image Shape 52

Correcting the Image Shape with Quick Corner

You can use the projector's Quick Corner setting to correct the shape and size

of an image that is unevenly rectangular.

aTurn on the projector and display an image.

bPress the [Menu] button on the control panel or remote control.

cSelect the Settings menu and press [Enter].

dSelect Keystone and press [Enter].

eSelect Quick Corner and press [Enter]. Then press [Enter] again if

necessary.

You see the area selection screen.

fUse the arrow buttons to select the corner of the image you want to

adjust. Then press [Enter].

gPress the arrow buttons to adjust the image shape as necessary.

To return to the area selection screen, press [Enter].

Image Shape 53

a• If you see this screen, you cannot adjust the shape any further

in the direction indicated by the gray triangle.

• To reset the Quick Corner corrections, hold down [Esc] for

about 2 seconds while the Quick Corner adjustment screen is

displayed, and select Reset Quick Corner. Select Switch to

H/V-Keystone to switch the image shape correction method to

H/V-Keystone.

hRepeat steps 6 and 7 as needed to adjust any remaining corners.

iWhen you are finished, press [Esc].

The Keystone setting is now set to Quick Corner in the projector's Settings

menu. The next time you press the keystone adjustment buttons on the

control panel, the area selection screen is displayed.

gg Related Links

• "Projector Feature Settings - Settings Menu" p.132

Resizing the Image with the Zoom Ring 54

You can resize the image using the projector's zoom ring. (Available only for

models that have the zoom ring.)

aTurn on the projector and display an image.

bRotate the zoom ring to enlarge or reduce the image.

gg Related Links

• "List of Functions" p.10

Focusing the Image Using the Focus Ring 55

You can correct the focus using the focus ring.

aTurn on the projector and display an image.

bRotate the focus ring to adjust the focus.

Selecting an Image Source 56

When multiple image sources are connected to the projector, such as a

computer and DVD player, you can switch from one image source to the

other.

Available sources vary depending on the projector model.

aMake sure the connected image source you want to use is turned on.

bFor video image sources, insert a DVD or other video media and press

play.

cDo one of the following:

• Press the [Source Search] button on the control panel or remote

control until you see the image from the source you want.

aThis screen is displayed when no image signal is detected.

Check the cable connections between the projector and image

source.

• Press the button for the source you want on the remote control. If

there is more than one port for that source, press the button again to

cycle through the sources.

• Press the [Home] button on the control panel or remote control.

Selecting an Image Source 57

Then select the source you want to use from the screen displayed.

gg Related Links

• "List of Functions" p.10

Image Aspect Ratio 58

The projector can display images in different width-to-height ratios called

aspect ratios. Normally, the input signal from your video source determines

the image's aspect ratio. However, for certain images you can change the

aspect ratio to fit your screen.

If you always want to use a particular aspect ratio for a certain video input

source, you can select it using the projector's Signal menu.

gg Related Links

• "Changing the Image Aspect Ratio" p.58

• "Available Image Aspect Ratios" p.58

• "Projected Image Appearance with Each Aspect Mode" p.59

• "Input Signal Settings - Signal Menu" p.131

Changing the Image Aspect Ratio

You can change the aspect ratio of the displayed image.

aTurn on the projector and switch to the image source you want to use.

bPress the [Aspect] button on the remote control.

The shape and size of the displayed image changes, and the name of the

aspect ratio appears briefly on the screen.

cTo cycle through the available aspect ratios for your input signal, press

the [Aspect] button repeatedly.

aTo display images without black bars, set Resolution to Wide or

Normal in the projector’s Signal menu according to the computer’s

resolution.

gg Related Links

• "Input Signal Settings - Signal Menu" p.131

Available Image Aspect Ratios

You can select the following image aspect ratios, depending on the input

signal from your image source.

a• The available aspect ratio setting varies depending on the input

signal.

• Note that using the aspect ratio function of the projector to reduce,

enlarge, or split the projected image for commercial purposes or for

public viewing may infringe upon the rights of the copyright holder

of that image based on copyright law.

For projectors with a resolution of Full HD (1920 × 1080) or WXGA (1280

× 800)

Aspect mode Description

Auto Automatically sets the aspect ratio according to the

input signal and the Resolution setting.

Normal Displays images using the full projection area and

maintains the aspect ratio of the image.

16:9 * Converts the aspect ratio of the image to 16:9.

Full Displays images using the full size of the projection

area, but does not maintain the aspect ratio.

Zoom Displays images using the full width of the projection

area and maintains the aspect ratio of the image.

Native Displays images as is (aspect ratio and resolution are

maintained).

Image Aspect Ratio 59

* Available only for projectors with a resolution of WXGA (1280 × 800).

For projectors with a resolution of XGA (1024 × 768)

Aspect mode Description

Auto Automatically sets the aspect ratio according to the

input signal and the Resolution setting.

Normal Displays images using the full projection area and

maintains the aspect ratio of the image.

4:3 Converts the aspect ratio of the image to 4:3.

16:9 Converts the aspect ratio of the image to 16:9.

gg Related Links

• "List of Functions" p.10

Projected Image Appearance with Each Aspect Mode

Black bands and cropped images may project in certain aspect ratios,

depending on the aspect ratio and resolution of your input signal. See the

following table to confirm the position of black bands and cropped images.

aThe image for Native varies depending on the input signal.

For projectors with a resolution of Full HD (1920 × 1080) or WXGA (1280

× 800)

Aspect mode Aspect ratio for input signals

16:10 16:9 4:3

Normal

Auto

Aspect mode Aspect ratio for input signals

16:10 16:9 4:3

16:9 *

Full

Zoom

Native

* Available only for projectors with a resolution of WXGA (1280 × 800).

For projectors with a resolution of XGA (1024 × 768)

Aspect mode Aspect ratio for input signals

16:10 16:9 4:3

Normal

Auto

4:3

16:9

Image Aspect Ratio 60

gg Related Links

• "List of Functions" p.10

Adjusting Image Quality (Color Mode) 61

The projector offers different color modes to provide optimum brightness,

contrast, and color for a variety of viewing environments and image types.

You can select the mode designed to match your image and environment, or

experiment with the available modes.

gg Related Links

• "Changing the Color Mode" p.61

• "Available Color Modes" p.61

• "Setting Auto Iris" p.61

Changing the Color Mode

You can change the projector's Color Mode using the remote control to

optimize the image for your viewing environment.

aTurn on the projector and switch to the image source you want to use.

bPress the [Color Mode] button on the remote control to change the

Color Mode.

The name of the Color Mode appears briefly on the screen and then

image appearance changes.

cTo cycle through all of the available color modes for your input signal,

press the [Color Mode] button repeatedly.

aYou can also set the Color Mode setting in the projector's Image

menu.

gg Related Links

• "Image Quality Settings - Image Menu" p.130

Available Color Modes

You can set the projector to use these color modes, depending on the input

source you are using:

Color mode Description

Dynamic This is the brightest mode. Best for prioritizing

brightness.

Presentation Best for projecting vivid images.

Cinema Best for enjoying content such as movies.

sRGB Best for faithfully reproducing the color of the source

image.

Blackboard Best for projecting images directly on a green

chalkboard.

Setting Auto Iris

You can turn on Auto Iris to automatically optimize the image based on the

brightness of the content.

This setting is available for Dynamic or Cinema color modes.

aTurn on the projector and switch to the image source you want to use.

bPress the [Menu] button on the control panel or remote control.

Adjusting Image Quality (Color Mode) 62

cSelect the Image menu and press [Enter].

dSelect Auto Iris and press [Enter].

eChoose one of the following options and press [Enter]:

•Normal for standard brightness adjustment.

•High Speed to adjust brightness as soon as the scene changes.

fPress [Menu] or [Esc] to exit the menus.

Controlling the Volume with the Volume Buttons 63

The volume buttons control the projector's internal speaker system.

You can also control the volume of any external speakers you connected to

the projector.

You must adjust the volume separately for each connected input source.

aTurn on the projector and start a presentation.

bTo lower or raise the volume, press the [Volume] buttons on the

control panel or remote control as shown.

A volume gauge appears on the screen.

cTo set the volume to a specific level for an input source, select Volume

in the projector's Settings menu.

Caution

Do not start a presentation at a high volume setting. Sudden loud noises may cause

hearing loss.

Always lower the volume before powering off, so that you can power on and then

gradually increase the volume.

gg Related Links

• "Projector Feature Settings - Settings Menu" p.132

Adjusting Projector Features

Follow the instructions in these sections to use your projector's adjustment features.

gg Related Links

• "Projecting Two Images Simultaneously" p.65

• "Projecting a PC Free Presentation" p.68

• "Shutting Off the Image and Sound Temporarily" p.73

• "Stopping Video Action Temporarily" p.74

• "Zooming In/Zooming Out of Images (E-Zoom)" p.75

• "Saving a User's Logo Image" p.77

• "Saving a User Pattern" p.78

• "Color Difference Correction when Projecting from Multiple Projectors" p.79

• "Projector Security Features" p.82

Projecting Two Images Simultaneously 65

You can use the split screen feature to simultaneously project two images

from different image sources. You can control the split screen feature using

the remote control or the projector menus.

a• While using the split screen feature, other projector features may not

be available and some settings may be automatically applied to both

images.

aPress the [Split] button on the remote control.

The currently selected input source moves to the left of the screen.

aYou can perform the same operations from Split Screen in the

projector's Settings menu.

bPress the [Menu] button.

You see this screen:

Projecting Two Images Simultaneously 66

cTo select an input source for the other image, select the Source setting,

press [Enter], select the input source, select Execute, and press [Enter].

a• You can only select input sources that can be combined.

• While using the split screen feature, the Source screen appears

when you change the input source from the remote control.

dTo switch images, select Swap Screens and press [Enter].

The projected images on the left and right are swapped.

eTo enlarge one image while reducing the other image, select Screen

Size, press [Enter], select a size, and press [Enter]. To exit the menu,

press [Menu].

aDepending on the video input signals, the images may not

appear at the same size even if you select Equal.

fTo select the audio, select Audio Source, press [Enter], select an audio

option, and press [Enter]. To exit the menu, press [Menu].

aSelect Auto to hear audio from the largest screen or the left

screen.

gTo align the projected images, select Align, press [Enter], select the

setting, and press [Enter] again. To exit the menu, press [Menu].

hTo exit the split screen feature, press [Split] or [Esc].

gg Related Links

• "Unsupported Input Source Combinations for Split Screen Projection" p.67

• "Split Screen Projection Restrictions" p.67

• "List of Functions" p.10

Projecting Two Images Simultaneously 67

Unsupported Input Source Combinations for Split

Screen Projection

These input source combinations cannot be projected on a split screen.

• Computer1 and Computer2

• Computer1/Computer2 and Video

• HDMI1/HDMI2 and Screen Mirroring

• HDMI1 and HDMI2

• USB Display and USB/LAN

• USB and LAN

gg Related Links

• "List of Functions" p.10

Split Screen Projection Restrictions

Operating restrictions

The following operations cannot be performed during split screen projection.

• Setting the projector's menu

• E-Zoom

• Switching the aspect mode (the aspect mode is set to Normal)

• Operations using the [User] button on the remote control

• Auto Iris

Image restrictions

• If you make adjustments such as Brightness,Contrast,Color Saturation,

Tint, and Sharpness in the projector's Image menu, you can apply them

only to the image on the left. Default adjustments are applied to the image

on the right. Adjustments that affect the entire projected image such as

Color Mode and Color Temp. are applied for both left and right images.

• Even if you make adjustments for Noise Reduction and Deinterlacing in

the projector's Image menu, Noise Reduction is set to 0 and Deinterlacing

is set to Off for the image on the right.

sImage >Image Enhancement >Noise Reduction

sImage >Image Enhancement >Deinterlacing

• Even if you set Display Background to Logo in the projector's Extended

menu, the blue screen appears when no image signal is being input.

gg Related Links

• "Image Aspect Ratio" p.58

• "Adjusting Image Quality (Color Mode)" p.61

• "Projector Feature Settings - Settings Menu" p.132

• "Projector Setup Settings - Extended Menu" p.134

• "Image Quality Settings - Image Menu" p.130

• "Zooming In/Zooming Out of Images (E-Zoom)" p.75

• "Setting Auto Iris" p.61

Projecting a PC Free Presentation 68

You can use your projector's PC Free feature whenever you connect a USB

device that contains compatible presentation files. This lets you quickly and

easily display a presentation and control it using the projector's remote

control.

gg Related Links

• "Supported PC Free File Types" p.68

• "Precautions on PC Free Projection" p.68

• "Starting a PC Free Slide Show" p.69

• "Starting a PC Free Movie Presentation" p.70

• "PC Free Display Options" p.71

• "List of Functions" p.10

Supported PC Free File Types

You can project these types of files using the projector's PC Free feature.

a• For best results, place your files on media that is formatted in

FAT16/32.

• If you have trouble projecting from media formatted for non-

Windows file systems, try formatting the media for Windows

instead.

File contents File type

(extension)

Details

Image .jpg Make sure the file is not:

• CMYK format

• Progressive format

• Highly compressed

• Above 8192 × 8192 resolution

.bmp Make sure the file is not:

• Above 1280 × 800 resolution

.gif Make sure the file is not:

• Above 1280 × 800 resolution

• Animated

• Interlaced

.webp Make sure the file is not:

• Above 1280 × 800 resolution *

• Interlaced

Movie .avi

(Motion

JPEG)

Supports only AVI 1.0.

Make sure the file is not:

• Saved with an audio codec other than PCM or

ADPCM

• Above 1280 × 720 resolution

• Larger than 2 GB

* When you use a projector with a resolution of Full HD, you can project a

file with a maximum resolution of 1920 × 1080.

Precautions on PC Free Projection

Note the following precautions when using PC Free features.

• You cannot use a USB key for PC Free features.

• Do not disconnect the USB storage device while it is being accessed;

otherwise, PC Free may not operate correctly.

Projecting a PC Free Presentation 69

• You may not be able to use the security features on certain USB storage

devices with PC Free features.

• When connecting a USB device that includes an AC adapter, connect the

AC adapter to an electrical outlet when you use the device with your

projector.

• Some commercially available USB card readers may not be compatible with

the projector.

• The projector can recognize up to 5 cards inserted into the connected card

reader at one time.

• You cannot correct keystone distortion while projecting in PC Free, so

correct the image shape before you begin your presentation.

• You can use the following functions while projecting in PC Free.

• Freeze

• A/V Mute

• E-Zoom

gg Related Links

• "Stopping Video Action Temporarily" p.74

• "Shutting Off the Image and Sound Temporarily" p.73

• "Zooming In/Zooming Out of Images (E-Zoom)" p.75

Starting a PC Free Slide Show

After connecting a USB device to the projector, you can switch to the USB

input source and start your slide show.

a• You can change the PC Free operation options or add special effects

by highlighting Option at the bottom of the screen and pressing

[Enter].

aPress the [USB] button on the remote control.

The PC Free file list screen is displayed.

a• If the Select Drive screen is displayed, press the arrow buttons

to select the drive and press [Enter].

• To display images on the other USB drive, highlight Select

Drive at the top of the file list screen and press [Enter].

bDo one of the following to locate your files:

• If you need to display files inside a subfolder on your device, press

the arrow buttons to highlight the folder and press [Enter].

• To move back up a folder level on your device, highlight Back to

Top and press [Enter].

cDo one of the following:

• To display an individual image, press the arrow buttons to highlight

the image and press [Enter]. (Press the [Esc] button to return to the

file list screen.)

• To display a slide show of all the images in a folder, press the arrow

buttons to highlight the Slideshow option at the bottom of the screen

and press [Enter].

Projecting a PC Free Presentation 70

a• You can change the image switching time by highlighting

Option at the bottom of the screen and pressing [Enter].

• If any file names are longer than the display area or include

unsupported symbols, the file names may be shortened or

changed only on the screen display.

dWhile projecting, use the following commands to control the display:

• To rotate a displayed image, press the up or down arrow button.

• To move to the next or previous image, press the left or right arrow

button.

eTo stop the display, follow the on-screen instructions or press the [Esc]

button.

You return to the file list screen.

fTurn off the USB device, if necessary, and then disconnect the device

from the projector.

gg Related Links

• "PC Free Display Options" p.71

• "Connecting to a USB Device" p.31

Starting a PC Free Movie Presentation

After connecting a USB device to the projector, you can switch to the USB

input source and start your movie.

a• You can change the PC Free operation options by highlighting

Option at the bottom of the screen and pressing [Enter].

aPress the [USB] button on the remote control.

The PC Free file list screen is displayed.

a• If the Select Drive screen is displayed, press the arrow buttons

to select the drive and press [Enter].

• To display movie files on the other USB drive, highlight Select

Drive at the top of the file list screen and press [Enter].

Projecting a PC Free Presentation 71

bDo one of the following to locate your files:

• If you need to display files inside a subfolder on your device, press

the arrow buttons to highlight the folder and press [Enter].

• To move back up a folder level on your device, highlight Back to

Top and press [Enter].

cTo play back a movie, press the arrow buttons to highlight the file and

press [Enter].

a• If any file names are longer than the display area or include

unsupported symbols, the file names may be shortened or

changed only on the screen display.

• If you want to play back all the movies in a folder in sequence,

select the Slideshow option at the bottom of the screen.

dTo stop movie playback, press the [Esc] button, highlight Exit, and

press [Enter].

You return to the file list screen.

eTurn off the USB device, if necessary, and then disconnect the device

from the projector.

gg Related Links

• "PC Free Display Options" p.71

• "Connecting to a USB Device" p.31

PC Free Display Options

You can select these display options when using PC Free. To access this

screen, highlight Option at the bottom of the PC Free file list screen and press

[Enter].

Setting Options Description

Display Order Name Order Displays files in name order

Date Order Displays files in date order

Sort Order In Ascending Sorts files in first-to-last order

In Descending Sorts files in last-to-first order

Continuous Play On Displays a slide show continuously

Off Displays a slide show once

Screen Switching

Time

No Does not display the next file

automatically

1 Second to 60 Seconds Displays files for the selected time

and switches to the next file

automatically; high resolution images

may switch at a slightly slower rate

Projecting a PC Free Presentation 72

Setting Options Description

Effect No No effect

Wipe Transitions between images using a

wipe effect

Dissolve Transitions between images using a

dissolve effect

Random Transitions between images using a

random variety of effects

Shutting Off the Image and Sound Temporarily 73

You can temporarily turn off the projected image and sound if you want to

redirect your audience's attention during a presentation. Any sound or video

action continues to run, however, so you cannot resume projection at the

point that you stopped it.

aIf you want to display an image such as a company logo or picture

when the [A/V Mute] button is pressed, you can select the screen

displayed in the A/V Mute setting in the projector's Extended menu.

sExtended >Display >A/V Mute

aPress the [A/V Mute] button on the remote control to temporarily stop

projection and mute any sound.

bTo turn the image and sound back on, press [A/V Mute] again.

a• You can also stop projection using the A/V Mute slide lever on the

projector.

• The projector's power automatically turns off 30 minutes after A/V

Mute is enabled. You can disable this feature.

sECO >A/V Mute Timer

• The lamp is still operating during A/V Mute, so the lamp hours

continue to accumulate.

gg Related Links

• "Projector Setup Settings - Extended Menu" p.134

• "Projector Setup Settings - ECO Menu" p.147

Stopping Video Action Temporarily 74

You can temporarily stop the action in a video or computer presentation and

keep the current image on the screen. Any sound or video action continues to

run, however, so you cannot resume projection at the point that you stopped

it.

aPress the [Freeze] button on the remote control to stop the video

action.

bTo restart the video action in progress, press [Freeze] again.

Zooming In/Zooming Out of Images (E-Zoom) 75

You can zoom in or zoom out of the projected image using the [E-Zoom]

button on the remote control.

gg Related Links

• "Zooming Into Images" p.75

• "Zooming Out of Images" p.75

Zooming Into Images

aPress the [E-Zoom] + button on the remote control.

The projected image is enlarged focusing around the center of the

image. You can enlarge the image between one to four times in 25

incremental steps.

bUse the following buttons on the remote control to adjust the zoomed

image:

• Press the [E-Zoom] + button repeatedly to zoom into the image.

• To pan around the zoomed image, use the arrow buttons.

• To zoom out of the image, press the [E-Zoom] – button.

• To return to the original image size, press the [Default] button.

aWhen projecting images from an Epson document camera, you can

enlarge the image from one to eight times its size in 57 incremental

steps using the [E-Zoom] + button on the document camera.

Zooming Out of Images

aPress the [E-Zoom] - button on the remote control.

The projected image is reduced. You can reduce the image between

100% to 50% in incremental steps.

bUse the following buttons on the remote control to adjust the zoomed-

out image:

• Press the [E-Zoom] - button repeatedly to zoom out of the projected

image.

• To move the zoomed-out image in the projection area, use the arrow

buttons.

• To zoom into the image, press the [E-Zoom] + button.

• To return to the original image size, press the [Default] button.

Zooming In/Zooming Out of Images (E-Zoom) 76

aWhen projecting image from an Epson document camera, you can also

reduce the image using the [E-Zoom] - button on the document

camera.

Saving a User's Logo Image 77

You can save an image on the projector and display it whenever the projector

turns on. You can also display the image when the projector is not receiving

an input signal. This image is called the user's logo screen.

You can select a photo, graphic, or company logo as the user's logo, which is

useful in identifying the projector's owner to help deter theft. You can prevent

changes to the user's logo by setting up password protection.

a• If the User's Logo Protection setting in the Password Protection

setting menu is set to On, set to Off before saving the user's logo.

• When you copy the menu settings from one projector to another

using the batch setup feature, user's logo is also copied. Do not

multiple projectors as a user's logo.

• You cannot save content that is protected by HDCP.

aDisplay the image you want to project as the user's logo.

bPress the [Menu] button, select the Extended menu, and press [Enter].

cSelect User's Logo >Start Setting and press [Enter].

You see a prompt asking if you want to use the displayed image as a

user's logo.

aAdjustments such as Keystone, E-Zoom, or Aspect are

temporarily canceled when you select User's Logo.

dSelect Yes and press [Enter].

eCheck the displayed image, and then select Yes to save it as the user's

logo.

The user's logo is overwritten and a completion message is displayed.

fPress [Esc] to exit the message screen.

gSelect the Extended menu and press [Enter].

hSelect Display and press [Enter].

iSelect when you want to display the User's Logo screen:

• To display it whenever there is no input signal, select Display

Background and set it to Logo.

sExtended >Display >Display Background

• To display it whenever you turn the projector on, select Startup

Screen and set it to On.

sExtended >Display >Startup Screen

• To display it whenever you press the [A/V Mute] button, select A/V

Mute and set it to Logo.

sExtended >Display >A/V Mute

To prevent anyone from changing the User's Logo settings without first

entering a password, set the User's Logo Protection setting to On in the

Password Protection setting menu and set the password.

gg Related Links

• "Shutting Off the Image and Sound Temporarily" p.73

• "Selecting Password Security Types" p.83

Saving a User Pattern 78

There are four types of patterns pre-registered in the projector, such as ruled

lines and grid patterns. You can project these patterns to aid in presentations

using the Pattern Display settings.

You can also save the image that is currently being projected as a User

Pattern.

aOnce you save a User Pattern, the pattern cannot be returned to the

factory default.

aProject the image you want to save as the User Pattern, and then press

the [Menu] button on the control panel or remote control.

bSelect the Settings menu and press [Enter].

cSelect Pattern >User Pattern and press [Enter].

You see a prompt asking if you want to use the displayed image as a

User Pattern.

a• Adjustments such as Keystone, E-Zoom, or Aspect are

temporarily cancelled when you select User Pattern.

• You cannot save digital images protected by HDCP technology

as a User Pattern.

dSelect Yes and press [Enter].

You see a prompt asking if you want to save the image as the User

Pattern.

eSelect Yes and press [Enter].

You see a completion message.

Color Difference Correction when Projecting from Multiple Projectors 79

When lining up multiple projectors to project images, you can correct the

brightness and color tone of each projector's image so that the images match

closely.

You can set a unique projector ID for each projector to operate them

individually using a remote control, and then correct the brightness and color

for each projector.

a• In some cases the brightness and color tone may not match

completely even after correction.

• If brightness and color tone differences become more noticeable over

time, repeat the adjustments.

gg Related Links

• "Setting the Projector ID" p.79

• "Selecting the Projector You want to Operate" p.79

• "Matching Multiple-Projector Display Quality" p.80

Setting the Projector ID

To control multiple projectors from a remote control, give each projector a

unique ID.

aPress the [Menu] button, select the Extended menu, and press [Enter].

bSelect Projector ID and press [Enter].

cUse the arrow buttons to select the identification number you want to

use for the projector. Then press [Enter].

dPress [Menu] or [Esc] to exit the menus.

eRepeat these steps for all the other projectors you want to operate from

one remote control.

Selecting the Projector You want to Operate

After setting the projector's ID, select the ID for the projector you want to

operate using the remote control.

aAim the remote control at the target projector and press the [ID]

button.

Color Difference Correction when Projecting from Multiple Projectors 80

The current Projector ID is displayed on the projected screen. It

disappears after about 3 seconds.

bWhile holding the [ID] button, press the number button that matches

the ID of the projector you want to operate.

The projector you want to operate is selected.

a• When you select [0/All] on the remote control, you can

operate all projectors regardless the Projector ID setting.

• When you set the Projector ID setting to Off, you can operate

the projector using the remote control whichever ID you select

on the remote control.

• The projector ID setting is saved in the remote control. Even if

the remote control batteries are removed to replace them and

so on, the saved ID setting is retained. However, if the batteries

are left out of the remote control for an extended period, the

ID returns to its default setting (0/All).

• When you use multiple remote controls at the same time, you

may not be able to operate projectors as intended due to

infrared interference.

Matching Multiple-Projector Display Quality

You can match the display quality of multiple projectors that will project next

to each other.

aTurn on all the projectors on which you want to match the display

quality.

bSet ID numbers on each projector.

cMake sure all the projectors are using the same Color Mode setting.

dSelect the remote control ID to match the first projector.

Color Difference Correction when Projecting from Multiple Projectors 81

ePress the [Menu] button, select the Image menu, and press [Enter].

fSelect settings as necessary.

gSelect the remote control ID to match the next projector, then repeat

Image menu adjustments as necessary to match the projectors' displays.

Projector Security Features 82

You can secure your projector to deter theft or prevent unintended use by

setting up the following security features:

• Password security to prevent people who do not know the password from

using the projector, and prevent changes to the startup screen and other

settings.

This acts as an anti-theft function as the projector cannot be used even if it

is stolen, and you can limit who can use the projector.

• Button lock security to block operation of the projector using the buttons

on the control panel.

This is useful at events or shows when you want to deactivate all buttons

during projection or at schools when you want to limit button operation.

• Security cabling to physically secure the projector in place.

gg Related Links

• "Password Security Types" p.82

• "Locking the Projector's Buttons" p.84

• "Installing a Security Cable" p.85

Password Security Types

You can set up the following types of password security using one shared

password:

•Power On Protection password prevents anyone from using the projector

without first entering a password. When plugging the power cord and

turning on the projector at first time, you must enter the correct password.

This also applies to Direct Power On and Auto Power On.

•User's Logo Protection password prevents anyone from changing the

custom screen displayed when the projector turns on, when no signal is

being input, or when you use the A/V Mute feature. The custom screen

discourages theft by identifying the projector's owner.

•Network Protection password prevents anyone from changing the

projector's Network settings.

•Schedule Protection password prevents anyone from changing the

projector's schedule settings.

•Screen Mirroring Protec. password prevents anyone from changing the

projector's Screen Mirroring settings.

gg Related Links

• "Setting a Password" p.82

• "Selecting Password Security Types" p.83

• "Entering a Password to Use the Projector" p.84

• "List of Functions" p.10

Setting a Password

To use password security, you must set a password.

aThe default password is set to "0000". Change this to your own

password.

aHold down the [Freeze] button on the remote control for about 5

seconds.

You see the Password Protection setting menu.

aIf Password Protection is already activated, you must enter the

correct password to display the Password Protection setting

menu.

Projector Security Features 83

bSelect Password and press [Enter].

You see the prompt "Change the password?".

cSelect Yes and press [Enter].

aIf you select No, the Password Protection setting menu is

displayed again.

dHold down the [Num] button on the remote control and use the

numeric buttons to set a four-digit password.

The password displays as **** as it is entered. A confirmation prompt is

displayed when you enter the fourth digit.

eEnter the password again.

You see the message "Password accepted". If you enter the password

incorrectly, a message is displayed prompting you to re-enter the

password.

fPress [Esc] to return to the menu.

gMake a note of the password and keep it in a safe place.

Selecting Password Security Types

After setting a password, you see this menu, allowing you to select the

password security types you want to use.

If you do not see this menu, hold down the [Freeze] button on the remote

control for 5 seconds until the menu appears.

• To prevent unauthorized use of the projector, select On as the Power On

Protection setting.

• To prevent changes to the User's Logo screen or related display settings,

select On as the User's Logo Protection setting.

• To prevent changes to network settings, select On as the Network

Protection setting.

• To prevent changes to the projector's schedule settings, select On as the

Schedule Protection setting.

• To prevent changes to the projector's Screen Mirroring settings, select On as

the Screen Mirroring Protec. setting.

Projector Security Features 84

You can attach the password protect sticker to the projector as an additional

theft deterrent.

aBe sure to keep the remote control in a safe place; if you lose it, you will

not be able to enter the password.

Entering a Password to Use the Projector

When the password screen is displayed, enter the correct password.

aHold down the [Num] button on the remote control while you enter

the password using the numeric buttons.

The password screen closes.

bIf the password is incorrect, you see a message and a prompt to try

again. Enter the correct password to proceed.

Attention

• If an incorrect password is entered three times in succession, the message

"The projector's operation will be locked." is displayed for approximately

5 minutes, and the projector switches to standby mode. If this happens,

disconnect the power plug from the electrical outlet, reinsert it, and turn

the projector back on. The projector displays the password entry screen

again so that you can enter the correct password.

• If you have forgotten the password, make a note of the "Request Code:

xxxxx" number that appears on the screen and contact Epson for help.

• If you continue to repeat the above operation and input the wrong

password 30 times in succession, the message "The projector's operation

will be locked. Contact Epson as described in your documentation." is

displayed and the projector does not accept any more password entries.

Contact Epson for help.

Locking the Projector's Buttons

You can lock the buttons on the control panel to prevent anyone from using

the projector. The projector can still be operated using the remote control.

aPress the [Menu] button on the control panel or remote control.

Projector Security Features 85

bSelect the Settings menu and press [Enter].

cSelect Lock Setting >Control Panel Lock, and press [Enter].

dSelect one of these lock types and press [Enter]:

• To lock all of the projector's buttons, select Full Lock.

• To lock all buttons except the power button, select Partial Lock.

You see a confirmation prompt.

eSelect Yes and press [Enter].

The Control Panel Lock setting takes effect.

gg Related Links

• "Unlocking the Projector's Buttons" p.85

Unlocking the Projector's Buttons

If the projector's buttons have been locked, do one of the following to unlock

them.

• Hold down the [Enter] button on the control panel for 7 seconds. A

message is displayed and the lock is released.

• Select Off as the Control Panel Lock setting in the projector's Settings

menu.

sSettings >Lock Setting >Control Panel Lock

gg Related Links

• "Projector Feature Settings - Settings Menu" p.132

Installing a Security Cable

You can install the security cable on the projector to deter theft.

• Use the security slot on the projector to attach a Kensington Microsaver

Security system.

aFor more details on the Microsaver Security System, visit the

Kensington Web site.

https://www.kensington.com/

• Use the security cable attachment point on the projector to attach a wire

cable and secure it to a room fixture or heavy furniture.

Projector Security Features 86

aYou can use a commercially available theft-prevention wire lock. See

the documentation supplied with the wire lock for locking

instructions.

Using the Projector on a Network

Follow the instructions in these sections to set up your projector for use on a network.

gg Related Links

• "Wired Network Projection" p.88

• "Wireless Network Projection" p.91

• "Wireless Network Projection from a Mobile Device (Screen Mirroring)" p.99

• "Secure HTTP" p.104

Wired Network Projection 88

You can send images to your projector through a wired network. To do this,

connect the projector to your network, and then set up your projector and

computer for network projection.

After connecting and setting up the projector as described here, download

and install Epson iProjection (Windows/Mac) from the following Web site.

epson.com/support/

Epson iProjection software sets up your computer for network projection. It

also allows you to hold interactive meetings by projecting user's computer

screens over a network. See the Epson iProjection Operation Guide

(Windows/Mac) for instructions.

ggRelated Links

• "Connecting to a Wired Network" p.88

• "Selecting Wired Network Settings" p.88

• "List of Functions" p.10

Connecting to a Wired Network

To connect the projector to a wired local area network (LAN), use a 100Base-

TX or 10Base-T network cable. To ensure proper data transmission, use a

Category 5 shielded cable or better.

aConnect one end of the network cable to your network hub, switch, or

router.

bConnect the other end of the cable to the projector's LAN port.

gg Related Links

• "List of Functions" p.10

Selecting Wired Network Settings

Before you can project from computers on your network, you need to select

network settings on the projector.

aMake sure you already connected the projector to your wired network

using the LAN port.

Wired Network Projection 89

aPress the [Menu] button, select the Network menu, and press [Enter].

bSelect Network Configuration and press [Enter].

cSelect the Basic menu and press [Enter].

dSelect the basic options as necessary.

•Projector Name lets you enter a name up to 16 alphanumeric

characters long to identify the projector over the network.

•PJLink Password lets you enter a password up to 32 alphanumeric

characters long for using the PJLink protocol for projector control.

•Remote Password lets you enter a password up to 8 alphanumeric

characters long for accessing the projector using the Basic Control.

(User name is EPSONREMOTE; default password is guest.)

•Web Control Password lets you enter a password up to 8

alphanumeric characters long for accessing the projector over the

Web. (User name is EPSONWEB; default password is admin.)

•Moderator Password lets you enter a four-digit number password

for accessing the projector as a moderator using Epson iProjection.

(No password is set by default.)

•Projector Keyword lets you turn on a security password to prevent

access to the projector by anyone not in the room with it. You must

enter a displayed, randomized keyword from a computer using

Epson iProjection to access the projector and share the current

screen.

•Display Keyword lets you select whether to display a projector

keyword on the projected image when accessing the projector using

Epson iProjection.

•Display LAN Info. lets you set the display format for the projector's

network information.

aUse the displayed keyboard to enter numbers and characters.

Press the arrow buttons on the remote control to highlight

characters and press [Enter] to select them.

Wired Network Projection 90

eSelect the Wired LAN menu and press [Enter].

fAssign the IP settings for your network as necessary.

• If your network assigns addresses automatically, select IP Settings to

set the DHCP setting to On.

• If you must set addresses manually, select IP Settings to set the

DHCP setting to Off, and then enter the projector's IP Address,

Subnet Mask, and Gateway Address as necessary.

• If you want to connect the projector to the network using IPv6, select

IPv6 Settings to set the IPv6 setting to On, and then set the Auto

Configuration and Use Temporary Address settings as necessary.

aTo highlight the numbers you want from the displayed keyboard,

press the arrow buttons on the remote control. To select a

highlighted number, press [Enter].

gTo prevent the IP address from being displayed on the LAN standby

screen and Home screen, set the IP Address Display setting to Off.

hWhen you finish selecting settings, select Complete and follow the on-

screen instructions to save your settings and exit the menus.

iPress the [LAN] button on the remote control.

The wired network settings complete when you see the correct IP

address on the LAN standby screen.

Wireless Network Projection 91

You can send images to your projector through a wireless network.

• To do this, you must install the Epson 802.11b/g/n wireless LAN module,

and then set up your projector and computer for wireless projection.

• Some models have built-in wireless LAN modules. You don't need to install

the Epson 802.11b/g/n wireless LAN module.

You can connect the projector to your wireless network by configuring the

connection manually using the projector's Network menus.

After installing the wireless LAN module and setting up the projector,

download and install the necessary network software. Use the following

software and documentation to set up and control wireless projection.

• Epson iProjection (Windows/Mac) software allows you to hold interactive

meetings by projecting the computer screens of users over a network. See

the Epson iProjection Operation Guide (Windows/Mac) for instructions.

• Epson iProjection (iOS/Android) app allows you to project from iOS or

Android devices.

You can download Epson iProjection from the App Store or Google Play.

Any fees incurred when communicating with the App Store or Google Play

are the responsibility of the customer.

• Epson iProjection (Chromebook) app allows you to project from

Chromebook devices.

You can download Epson iProjection from the Chrome Web Store. Any fees

incurred when communicating with the Chrome Web Store are the

responsibility of the customer.

gg Related Links

• "Installing the Wireless LAN Module" p.91

• "Selecting Wireless Network Settings Manually" p.92

• "Selecting Wireless Network Settings in Windows" p.94

• "Selecting Wireless Network Settings in Mac" p.95

• "Setting Up Wireless Network Security" p.95

• "Using a QR Code to Connect a Mobile Device" p.97

• "Using a USB Key to Connect a Windows Computer" p.98

• "List of Functions" p.10

Installing the Wireless LAN Module

To use the projector over a wireless network, install the Epson 802.11b/g/n

wireless LAN module. Do not install any other type of wireless LAN module.

Attention

Never remove the module while its indicator is blue or flashing, or while you are

projecting wirelessly. This could damage the module or lose data.

aUse a cross-head screwdriver to remove the screw that secures the

wireless LAN module cover.

Wireless Network Projection 92

bConnect the wireless LAN module to the USB-A port.

cAttach the wireless LAN module cover, and secure it in place with the

screw.

gg Related Links

• "List of Functions" p.10

Selecting Wireless Network Settings Manually

Before you can project from your wireless network, you need to select

network settings for the projector.

aPress the [Menu] button, select the Network menu, and press [Enter].

bSelect On as the Wireless LAN Power setting.

cSelect Network Configuration and press [Enter].

Wireless Network Projection 93

dSelect the Basic menu and press [Enter].

eSelect the basic options as necessary.

•Projector Name lets you enter a name up to 16 alphanumeric

characters long to identify the projector over the network.

•PJLink Password lets you enter a password up to 32 alphanumeric

characters long for using the PJLink protocol for projector control.

•Remote Password lets you enter a password up to 8 alphanumeric

characters long for accessing the projector using the Basic Control.

(User name is EPSONREMOTE; default password is guest.)

•Web Control Password lets you enter a password up to 8

alphanumeric characters long for accessing the projector over the

Web. (User name is EPSONWEB; default password is admin.)

•Moderator Password lets you enter a four-digit number password

for accessing the projector as a moderator using Epson iProjection.

(No password is set by default.)

•Projector Keyword lets you turn on a security password to prevent

access to the projector by anyone not in the room with it. You must

enter a displayed, randomized keyword from a computer using

Epson iProjection to access the projector and share the current

screen.

•Display Keyword lets you select whether to display a projector

keyword on the projected image when accessing the projector using

Epson iProjection.

•Display LAN Info. lets you set the display format for the projector's

network information.

aUse the displayed keyboard to enter numbers and characters.

Press the arrow buttons on the remote control to highlight

characters and press [Enter] to select them.

fSelect the Wireless LAN menu and press [Enter].

gSelect the Connection Mode setting.

•Quick lets you connect to multiple smartphones, tablets, or

computers directly using wireless communication.

•Advanced lets you connect to smartphones, tablets, or computers

over a wireless network access point.

hIf you selected the Advanced connection mode, select Search Access

Point to select the access point you want to connect to.

Wireless Network Projection 94

aIf you need to assign the SSID manually, select SSID to enter the

SSID.

iFor the Advanced connection mode, assign the IP settings for your

network as necessary.

• If your network assigns addresses automatically, select IP Settings to

set the DHCP setting to On.

• If you must set addresses manually, select IP Settings to set the

DHCP setting to Off, and then enter the projector's IP Address,

Subnet Mask, and Gateway Address as necessary.

• If you want to connect the projector to the network using IPv6, select

IPv6 Settings to set the IPv6 setting to On, and then set the Auto

Configuration and Use Temporary Address settings as necessary.

jTo prevent the SSID or IP address from being displayed on the LAN

standby screen and Home screen, set the SSID Display setting or the IP

Address Display setting to Off.

kWhen you finish selecting settings, select Complete and follow the on-

screen instructions to save your settings and exit the menus.

lPress the [LAN] button on the remote control.

The wireless network settings are complete when you see the correct IP

address on the LAN standby screen.

When you have finished making wireless settings for your projector, you need

to select the wireless network on your computer. Then start the network

software to send images to your projector through a wireless network.

Selecting Wireless Network Settings in Windows

Before connecting to the projector, select the correct wireless network on your

computer.

aTo access your wireless utility software, click the network icon on the

Windows taskbar.

bWhen connecting in Advanced connection mode, select the network

name (SSID) of the network the projector is connecting to.

cClick Connect.

Wireless Network Projection 95

Selecting Wireless Network Settings in Mac

Before connecting to the projector, select the correct wireless network in Mac.

aClick the Wi-Fi icon on the menu bar at the top of the screen.

bWhen connecting in Advanced connection mode, make sure Wi-Fi is

turned on and select the network name (SSID) of the network the

projector is connecting to.

Setting Up Wireless Network Security

You can set up security for your projector to use on a wireless network. Set up

one of the following security options to match the settings used on your

network:

• WPA2-PSK security

• WPA3-PSK security *

• WPA2/WPA3-PSK security *

• WPA3-EAP security *

• WPA2/WPA3-EAP security *

* Available only for the Advanced connection mode.

aContact your network administrator for guidance on entering the

correct information.

aIf you want to set up the WPA3-EAP or WPA2/WPA3-EAP security,

make sure your digital certificate file is compatible with projector

registration and placed directly on the USB storage device.

bPress the [Menu] button, select the Network menu, and press [Enter].

cSelect Network Configuration and press [Enter].

dSelect the Wireless LAN menu and press [Enter].

eSelect the Security setting and press [Enter].

fSelect the security settings to match your network settings.

Wireless Network Projection 96

gDo one of the following according to the security you selected.

•WPA3-PSK or WPA2/WPA3-PSK: Select Passphrase, press [Enter],

and enter a passphrase from 8 to 63 characters long. To enter more

than 32 characters, use your Web browser. Then go to step 16.

•WPA3-EAP or WPA2/WPA3-EAP: Select EAP Method and press

[Enter].

hSelect the protocol for authentication as the EAP Type setting.

iTo import your certificate, select the certificate type and press [Enter].

•Client Certificate for the PEAP-TLS or EAP-TLS type

•CA certificate for all EAP types

aYou can also register the digital certificates from your Web

browser. However, be sure to register just once or the certificate

may not install correctly.

jSelect Register and press [Enter].

kFollow the on-screen instructions to connect a USB storage device to

the projector's USB-A port.

lPress [Enter] to display the certificate list.

mSelect the certificate to import using the displayed list.

A message is displayed prompting you to enter the password for the

certificate.

nEnter a password and press [Enter].

The certificate is imported and a completion message appears.

oSelect your EAP settings as necessary.

•User name lets you enter a user name using up to 64 alphanumeric

characters. To enter more than 32 characters, use your Web browser.

When importing a client certificate, the name the certificate was

issued to is automatically set.

•Password lets you enter a password using up to 64 alphanumeric

characters for authentication when using the PEAP or EAP-FAST

type. To enter more than 32 characters, use your Web browser.

•Verify Server Cert. lets you select whether or not to verify the server

certificate when a CA certificate has been set.

•RADIUS Serv.Name lets you enter the server name to be verified.

Wireless Network Projection 97

pWhen you have finished making settings, select Complete and follow

the on-screen instructions to save your settings and exit the menus.

gg Related Links

• "Supported Client and CA Certificates" p.97

• "Network Menu - Wireless LAN Menu" p.140

Supported Client and CA Certificates

You can register these types of digital certificates.

Client Certificate (PEAP-TLS/EAP-TLS)

Specification Description

Format PKCS#12

Extension PFX, P12

Encryption RSA

Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512

Key length 512/1024/2048/4096 bit

Password * Up to 64 alphanumeric characters; required

CA Certificate (PEAP/PEAP-TLS/EAP-TLS/EAP-FAST)

Specification Description

Format X509v3

Extension DER/CER/PEM

Encryption RSA

Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512

Key length 512/1024/2048/4096 bit

Encoding BASE64/Binary

* You can set a password using up to 64 alphanumeric characters. However,

you need to use your Web browser to enter more than 32 characters.

Using a QR Code to Connect a Mobile Device

After selecting the wireless network settings for your projector, you can

display a QR code on the screen and use it to connect a mobile device using

the Epson iProjection (iOS/Android) app.

a• Make sure you have installed the latest version of Epson iProjection

on your device.

• You can download Epson iProjection for free from the App Store or

Google Play. Any fees incurred when communicating with the App

Store or Google Play are the responsibility of the customer.

• When using Epson iProjection in Quick connection mode, we

recommend making security settings.

aPress the [LAN] button on the remote control.

The QR code is displayed on the projected surface.

a• If you do not see the QR code, set the Display LAN Info.

setting to Text & QR Code in the projector's Network menu.

sNetwork >Network Configuration >Basic >Display

LAN Info.

• To hide the QR code, press [Esc].

• When the QR code is hidden, press [Enter] to display the code.

bStart Epson iProjection on your mobile device.

cRead the projected QR code using Epson iProjection to connect it to

the projector.

aTo correctly read the QR code, make sure you face the screen

squarely and closely enough so that the projected code fits into

the guide of the mobile device's QR code reader. If you are too

far from the screen, the code may not be read.

When a connection is established, select Contents menu from , and

then select the file you want to project.

Wireless Network Projection 98

Using a USB Key to Connect a Windows Computer

You can set up your USB flash drive as a USB key to quickly connect the

projector to a wireless LAN supported Windows computer. After creating the

USB key, you can quickly project images from the network projector.

aSet up the USB key using Epson iProjection (Windows/Mac) software.

aSee the Epson iProjection Operation Guide (Windows/Mac) for

instructions.

bMake sure the wireless LAN module is installed or built into your

projector.

cTurn on the projector.

dPress the [LAN] button on the remote control.

The LAN standby screen is displayed. Verify that an SSID and IP

address are displayed.

eDo one of the following to connect the USB key.

• Connect the USB key to the projector's USB-A port. (Models with a

built-in wireless LAN module.)

• Remove the wireless LAN module from the projector and insert the

USB key into the same port used for the wireless LAN module.

(Models with the optional wireless LAN module installed.)

You see a projected message that the network information update is

complete.

fRemove the USB key.

If your projector needs the wireless LAN module, reinsert the wireless

LAN module into the projector. (Models with the optional wireless

LAN module installed.)

gConnect the USB key to a USB port on your computer.

hFollow the on-screen instructions to install the necessary application.

a• If the Windows Firewall message is displayed, click Yes to

disable the firewall.

• You need administrator authority to install the software.

• If it is not installed automatically, double-click

MPPLaunch.exe in the USB key.

After a few minutes, your computer image is displayed by the projector.

iWhen you have finished projecting wirelessly, select the Safely Remove

Hardware option in the Windows taskbar, and then remove the USB

key from your computer.

aYou may need to restart your computer to reactivate your

wireless LAN connection.

Wireless Network Projection from a Mobile Device (Screen Mirroring) 99

You can send image to your projector from mobile devices such as laptops,

smartphones, and tablets using Miracast technology.

If your device supports Miracast, you do not need to install any additional

software. When using a Windows computer, make sure the necessary adapter

for the Miracast connection is available.

Note the following limitations when using Screen Mirroring features.

• You cannot play an interlaced image.

• You cannot play multi-channel audio over 3ch (channel 3).

• You cannot project images with a resolution above 1920 × 1080 and a frame

rate above 30 fps.

• You cannot play 3D video.

• You may not be able to view contents with copyright protection with a

Miracast connection depending on your device.

• Do not change the projector's Screen Mirroring Settings during Screen

Mirroring projection. Doing so may cause the projector to disconnect and it

may take a while to re-connect.

sNetwork >Screen Mirroring Settings

• Do not turn off the projector directly by the breaker during Screen

Mirroring projection.

aMobile devices with Android installed or Windows 8.1 or later installed

mainly support Miracast.

Support for Miracast varies depending on the mobile device. See your

mobile device manual for details.

gg Related Links

• "Selecting Screen Mirroring Settings" p.99

• "Connecting Using Screen Mirroring with the Miracast Function" p.101

• "List of Functions" p.10

Selecting Screen Mirroring Settings

You must select Screen Mirroring settings for your projector to project images

from your mobile device.

aIf you set a Screen Mirroring Protec. password, turn off your Screen

Mirroring Protec. password first.

aPress the [Menu] button, select the Network menu, and press [Enter].

Wireless Network Projection from a Mobile Device (Screen Mirroring) 100

bSelect On as the Screen Mirroring setting.

cSelect Screen Mirroring Settings and press [Enter].

dSet the Display Name setting as necessary.

eSelect the Operation Mode setting.

•Basic lets you connect with basic options.

•Extended lets you connect with advanced options.

fSelect the Basic setting as necessary.

•Wireless LAN Sys. lets you select the type of wireless LAN system

the projector is connecting to.

•Adjust Image Quality lets you adjust the screen mirroring

speed/quality. Select a small number to improve the quality and

select large number to increase the speed.

•Connection Mode lets you select the security type. Available only for

the Basic operation mode.

gFor the Extended operation mode, select the Extended setting.

•Meeting Mode lets you select the type of meeting. Select

Interruptions OK to connect to another mobile device during

Screen Mirroring projection or No Interruptions to exclusively

connect to one device.

•Channel lets you select the wireless channel used by Screen

Mirroring.

Wireless Network Projection from a Mobile Device (Screen Mirroring) 101

hSelect the Display setting as necessary.

•Display PIN Code lets you display the PIN code on the projected

image while projecting input sources other than Screen Mirroring.

•Display Device Name lets you display the newly connected device

name on the projected image while projecting input sources other

than Screen Mirroring.

iWhen you finish selecting settings, select Set and follow the on-screen

instructions to save your settings and exit the menus.

jPress the [Home] button on the remote control. The settings are

complete when you see the Display Name on the Home screen.

Connecting Using Screen Mirroring with the Miracast

Function

If your mobile device such as a smartphone supports Miracast, you can

connect it to the projector wirelessly and project images. You can play audio

through the projector's speaker system by connecting using Screen Mirroring.

aSelect Screen Mirroring Settings on your projector as necessary.

bPress the [LAN] button on the remote control to switch to the Screen

Mirroring source.

You see the Screen Mirroring standby screen.

cOn your mobile device, use your Miracast function to search for the

projector.

You see a list of available devices.

dSelect the projector's Display Name from the list.

eIf you see the PIN entry screen on your mobile device, enter the PIN

code displayed on the Screen Mirroring standby screen or at the bottom

right of the projected image.

The projector displays the image from your mobile device.

aIt may take some time until the connection is established. While

connecting, do not disconnect the projector's power cord. Doing

so may cause your device to freeze or malfunction.

Depending on the mobile device, you may need to delete a device

when connecting. Follow the on-screen instructions on your

device.

gg Related Links

• "Connecting Using Screen Mirroring in Windows 10" p.101

• "Connecting Using Screen Mirroring in Windows 8.1" p.102

Connecting Using Screen Mirroring in Windows 10

You can set up your computer for wireless projection and play audio through

the projector's speaker system by connecting using Screen Mirroring.

aSelect Screen Mirroring Settings on your projector as necessary.

bPress the [LAN] button on the remote control to switch to the Screen

Mirroring source.

You see the Screen Mirroring standby screen.

Wireless Network Projection from a Mobile Device (Screen Mirroring) 102

cDisplay Action Center, and then select Connect.

You see a list of available devices.

dSelect the projector's Display Name from the list.

eIf you see the PIN entry screen on your computer, enter the PIN code

displayed on the Screen Mirroring standby screen or at the bottom

right of the projected image.

The projector displays the image from your computer.

aIt may take some time until the connection is established. While

connecting, do not disconnect the projector's power cord. Doing

so may cause your device to freeze or malfunction.

Connecting Using Screen Mirroring in Windows 8.1

You can set up your computer for wireless projection from Charms in

Windows 8.1. You can play audio through the projector's speaker system by

connecting using Screen Mirroring.

aSelect Screen Mirroring Settings on your projector as necessary.

bPress the [LAN] button on the remote control to switch to the Screen

Mirroring source.

You see the Screen Mirroring standby screen.

cOn your computer, select Devices from Charms and select Project.

Wireless Network Projection from a Mobile Device (Screen Mirroring) 103

dSelect Add a wireless display.

You see a list of available devices.

eSelect the projector's Display Name from the list.

fIf you see the PIN entry screen on your computer, enter the PIN code

displayed on the Screen Mirroring standby screen or at the bottom

right of the projected image.

The projector displays the image from your computer.

aIt may take some time until the connection is established. While

connecting, do not disconnect the projector's power cord. Doing

so may cause your device to freeze or malfunction.

Secure HTTP 104

You can use the HTTPS protocol to increase security between the projector

and a Web browser communicating with it. To do this, you create a server

certificate, install it on the projector, and turn on the Secure HTTP setting in

the projector menus to verify the reliability of the Web browser.

sNetwork >Network Configuration >Others >Secure HTTP

Even if you do not install a server certificate, the projector automatically

creates a self-signed certificate and allows communication. However, because

the self-signed certificate cannot verify reliability from a Web browser, you

see a warning about the server's reliability when you access the projector from

a Web browser. This warning does not prevent communication.

gg Related Links

• "Importing a Web Server Certificate Using the Menus" p.104

• "List of Functions" p.10

Importing a Web Server Certificate Using the Menus

You can create your Web server certificate, and import it using the projector

menus and a USB flash drive.

aYou can also register the digital certificates from your Web browser.

However, be sure to register just once or the certificate may not install

correctly.

aMake sure your digital certificate file is compatible with projector

registration and directly placed on the USB storage device.

bPress the [Menu] button, select the Network menu, and press [Enter].

cSelect Network Configuration and press [Enter].

dSelect the Others menu and press [Enter].

eSet the Secure HTTP setting to On.

fSelect Web Server Cert. and press [Enter].

gSelect Register and press [Enter].

hFollow the on-screen instructions to connect a USB storage device to

the projector's USB-A port.

iPress [Enter] to display the certificate list.

jSelect the certificate to import using the displayed list.

A message is displayed prompting you to enter the password for the

certificate.

kEnter a password and press [Enter].

The certificate is imported and a completion message appears.

Secure HTTP 105

gg Related Links

• "Supported Web Server Certificates" p.105

Supported Web Server Certificates

You can register these types of digital certificates.

Web Server Certificate (Secure HTTP)

Specification Description

Format PKCS#12

Extension PFX, P12

Encryption RSA

Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512

Key length 512/1024/2048/4096 bit

Common name Network host name

Organization Optional

Password * Up to 64 alphanumeric characters; required

* You can set a password using up to 64 alphanumeric characters. However,

you need to use your Web browser to enter more than 32 characters.

Monitoring and Controlling the Projector

Follow the instructions in these sections to monitor and control the projector over a network.

gg Related Links

• "Epson Projector Management" p.107

• "Controlling a Networked Projector Using a Web Browser" p.108

• "Registering Digital Certificates from a Web Browser" p.112

• "Setting Up Projector Network E-Mail Alerts" p.113

• "Setting Up Monitoring Using SNMP" p.115

• "Using ESC/VP21 Commands" p.116

• "PJLink Support" p.118

• "Crestron Connected Support" p.119

• "Setting Projector Event Schedules" p.124

Epson Projector Management 107

Epson Projector Management software (Windows only) lets you monitor and

control your projector through the network. See the Epson Projector

Management Operation Guide for instructions.

You can download Epson Projector Management from the following Web

site.

epson.com/support/

ggRelated Links

• "List of Functions" p.10

Controlling a Networked Projector Using a Web Browser 108

Once you have connected your projector to your network, you can select

projector settings and control projection using a compatible Web browser.

This lets you access the projector remotely.

a• Make sure the computer and projector are connected to the network.

When projecting images using a wireless LAN, connect in Advanced

connection mode.

• You can use the following Web browsers.

• Internet Explorer 11 or later (Windows)

• Microsoft Edge (Windows)

• Safari (Mac, iOS)

• Chrome (Android)

• While using the Web browser, do not connect using a proxy server.

You cannot select all of the projector menu settings or control all

projector functions using a Web browser.

• If you set Standby Mode to Communication On, you can use a Web

browser to select settings and control projection even if the projector

is in standby mode (when the power is off).

sECO >Standby Mode >Standby Mode

aMake sure the projector is turned on.

bMake sure your computer or device is connected to the same network

as the projector.

cStart your Web browser on the computer or device.

dGo to the Epson Web Control screen by entering the projector's IP

address into the browser's address box. When entering an IPv6 address,

wrap the address with [ and ].

You see the Epson Web Control screen.

AControls the projector remotely.

BDisplays a test pattern.

CSets detailed projector settings.

DOpens the Crestron Connected operation window. Available only when

you set the Crestron Connected system.

EOperates the projector's menu settings with your finger or mouse.

eSelect the option corresponding to the projector function you want to

control.

Controlling a Networked Projector Using a Web Browser 109

a• You may need to log in to access some of the options on the

Epson Web Control screen. If you see a log in window, enter

your user name and password.

• When accessing the Basic Control option, the user name is

EPSONREMOTE and the default password is guest.

• When accessing other options, the user name is

EPSONWEB and the default password is admin.

• You can change the password in Web Control Password in

the projector's Network menu.

sNetwork >Network Configuration >Basic >Web

Control Password

• You can only select the following settings from Advanced.

• Monitor Password (up to 16 alphanumeric characters)

• IPv6 Settings (manual)

• HTTP port (port number used for Web Control except for

80 [default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357,

10000, 10001, 41794)

gg Related Links

• "Web Control Options" p.109

• "Projector Setup Settings - ECO Menu" p.147

• "Network Menu - Basic Menu" p.139

• "List of Functions" p.10

Web Control Options

Basic Control

a• If you see a log in window, enter your user name and password. (The

user name is EPSONREMOTE and the default password is guest.)

• You can change the password in Remote Password in the projector's

Network menu.

sNetwork >Network Configuration >Basic >Remote Password

AReturns to the Epson Web Control screen.

BTurns the projector on or off.

CSelects the input source.

Controlling a Networked Projector Using a Web Browser 110

DTurns the video and audio on or off temporarily.

EPauses or resumes images.

FDisplays the QR code.

GAdjusts the speaker volume.

HSearches for sources.

OSD Control Pad

AReturns to the Epson Web Control screen.

BDisplays the projector's setting menus.

CUse your finger or mouse to navigate the menus.

DResets the selected setting to its default value.

EReturns to the previous menu.

FDisplays help topics.

Test Pattern

AReturns to the Epson Web Control screen.

BDisplays available test patterns; select to project a test pattern.

CTurns off test pattern display.

Controlling a Networked Projector Using a Web Browser 111

Advanced

aIf the default Web Control Password is set, a screen prompting to

change the password appears before you can view the Advanced screen.

Follow the on-screen instructions to change the password.

AOpens the menus.

BDisplays the menu name you selected.

CSpecifies the projector settings.

DLock/unlock the projector settings.

EUpdates the projector settings.

aYou cannot change the following settings using Epson Web Control.

• User Button

• User's Logo

• HDMI EQ Setting

• Language

• Reset Lamp Hours

gg Related Links

• "List of Functions" p.10

Registering Digital Certificates from a Web Browser 112

You can register the digital certificates on the projector to provide security for

your presentation files.

aYou can also register the digital certificates in the projector's Network

menu. However, be sure to register just once or the certificate may not

install correctly.

sNetwork >Network Configuration >Wireless LAN >EAP

Method >Client Certificate

sNetwork >Network Configuration >Wireless LAN >EAP

Method >CA certificate

sNetwork >Network Configuration >Others >Web Server

Certificate

aMake sure your digital certificate file is compatible with projector

registration.

bMake sure the projector is turned on.

cStart your Web browser on a computer or device connected to the

network.

dGo to the Epson Web Control screen by entering the projector's IP

address into the browser's address box.

You see the Epson Web Control screen.

eSelect Advanced.

a• You may need to log in before you see the Advanced screen. If

a login screen is displayed, enter your user name and

password. (The user name is EPSONWEB and the default

password is admin.)

• You can change the password in Web Control Password in

the projector's Network menu.

sNetwork >Network Configuration >Basic >Web

Control Password

fUnder Network, select Certificate.

gSelect the certificate file you want to register.

hEnter the password in the Password box, and then click Set.

iWhen you finish registering the certificate, click Apply to finalize your

changes and complete the registration.

gg Related Links

• "List of Functions" p.10

Setting Up Projector Network E-Mail Alerts 113

You can set up the projector to send you an e-mail alert over the network if

there is a problem with the projector.

If you set the Standby Mode setting to Communication On, you can receive

the e-mail alerts even if the projector is in standby mode (when the power is

off).

sECO >Standby Mode >Standby Mode

aPress the [Menu] button, select the Network menu, and press [Enter].

bSelect Network Configuration and press [Enter].

cSelect the Notifications menu and press [Enter].

dSet the Mail Notification setting to On.

eEnter the IP address for the SMTP Server option.

aDo not use "127.x.x.x" (where x is a number from 0 to 255) for

the SMTP Server.

fSelect a number for the SMTP server Port Number, from 0 to 65535

(default is 25).

gSelect a type of Authentication of SMTP server.

hEnter a User Name for the SMTP server.

iEnter a Password for the SMTP server authentication.

jEnter the e-mail address to be indicated as the sender in From.

kChoose an address field, enter the e-mail address, and select the alerts

you want to receive. Repeat for up to three addresses.

aYour e-mail address can be up to 64 alphanumeric characters

long. To enter more than 32 characters, use your Web browser.

lWhen you finish selecting settings, select Complete and follow the on-

screen instructions to save your settings and exit the menus.

aIf a critical problem causes a projector to shut down, you may not

receive an e-mail alert.

gg Related Links

• "Network Projector E-mail Alert Messages" p.113

• "Projector Setup Settings - ECO Menu" p.147

• "List of Functions" p.10

Network Projector E-mail Alert Messages

When a problem occurs with a projector on the network, and you selected to

receive e-mail alerts, you receive an e-mail containing the following

information:

Setting Up Projector Network E-Mail Alerts 114

• The email address set in From as the mail sender

•Epson Projector in the subject line

• The name of the projector experiencing a problem

• The IP address of the affected projector

• Detailed information about the problem

Setting Up Monitoring Using SNMP 115

Network administrators can install SNMP (Simple Network Management

Protocol) software on network computers so they can monitor projectors. If

your network uses this software, you can set up the projector for SNMP

monitoring.

aPress the [Menu] button, select the Network menu, and press [Enter].

bSelect Network Configuration and press [Enter].

cSelect the Notifications menu and press [Enter].

dSet the SNMP setting to On.

eEnter up to two IP addresses to receive SNMP notifications, using 0 to

255 for each address field.

aDo not use these addresses: 224.0.0.0 through 255.255.255.255

(where x is a number from 0 to 255). This projector supports

SNMP agent version 1 (SNMPv1).

fEnter the SNMP Community Name up to 32 alphanumeric characters

long.

gWhen you finish selecting settings, select Complete and follow the on-

screen instructions to save your settings and exit the menus.

gg Related Links

• "List of Functions" p.10

Using ESC/VP21 Commands 116

You can control the projector from an external device using ESC/VP21.

gg Related Links

• "ESC/VP21 Command List" p.116

• "Cable Layouts" p.116

• "List of Functions" p.10

ESC/VP21 Command List

When the power ON command is transmitted to the projector, the power

turns on and it enters warm-up mode. When the projector's power has turned

on, a colon ":" (3Ah) is returned.

When a command is input, the projector executes the command and returns a

":", and then accepts the next command.

If the command being processed terminates abnormally, an error message is

output and a ":" is returned.

The following commands are available.

Item Command

Power On/Off On PWR ON

Off PWR OFF

Item Command

Signal selection Computer1 Auto SOURCE 1F

RGB SOURCE 11

Computer2 Auto SOURCE 2F

RGB SOURCE 21

HDMI1 SOURCE 30

HDMI2 SOURCE A0

Video SOURCE 41

USB Display SOURCE 51

USB SOURCE 52

LAN SOURCE 53

Screen Mirroring SOURCE 56

A/V Mute On/Off On MUTE ON

Off MUTE OFF

Add a Carriage Return (CR) code (0Dh) to the end of each command and

transmit.

Contact Epson for more details.

Cable Layouts

Serial connection

• Connector shape: D-Sub 9-pin (male)

• Projector input port name: RS-232C

• Cable type: Crossover (null modem) cable

Using ESC/VP21 Commands 117

In the following illustration, the projector side is shown on the left, and the

computer side on the right:

Signal name Function

GND Signal wire ground

TD Transmit data

RD Receive data

Communications protocol

• Default baud rate setting: 9600 bps

• Data length: 8 bit

• Parity: None

• Stop-bit: 1 bit

• Flow control: None

PJLink Support 118

PJLink was established by the JBMIA (Japan Business Machine and

Information System Industries Association) as a standard protocol for

controlling network-compatible projector's as part of their efforts to

standardize projector control protocols.

The projector complies with the PJLink Class2 standard established by the

JBMIA.

The port number used for the PJLink search function is 4352 (UDP).

You need to make network settings before you can use PJLink.

It complies with all commands except for the following commands defined by

PJLink Class2, and agreement was confirmed by the PJLink standard

adaptability verification.

http://pjlink.jbmia.or.jp/english/

• Non-compatible commands

Function PJLink command

Mute settings Image muting set AVMT 11

Audio muting set AVMT 21

• Input ports and corresponding input source number

Input port name Input source number

Computer1 11

Computer2 12

Video 21

HDMI 32

HDMI1 32

HDMI2 33

USB 41

LAN 52

USB Display 53

Screen Mirroring 57

• Manufacturer name displayed for "Manufacture name information query"

EPSON

• Model name displayed for "Product name information query"

• EPSON 992F

• EPSON 982W

• EPSON 972

• EPSON 118

• EPSON W49

• EPSON X49

gg Related Links

• "List of Functions" p.10

• "Using the Projector on a Network" p.87

Crestron Connected Support 119

If you are using the Crestron Connected network monitoring and control

system, you can set up your projector for use on the system. Crestron

Connected lets you control and monitor your projector using a Web browser.

a• You cannot use the Message Broadcasting feature in Epson Projector

Management when you use Crestron Connected.

• If you set the Standby Mode setting to Communication On, you can

control the projector even if the projector is in standby mode (when

the power is off).

sECO >Standby Mode >Standby Mode

For additional information on Crestron Connected, visit the Crestron Web

site.

https://www.crestron.com/products/line/crestron-connected

To monitor devices in the system, you can use Crestron RoomView Express

or Crestron Fusion provided by Crestron. You can communicate with the

help desk and send emergency messages. See the following Web site for

details.

http://www.crestron.com/getroomview

This manual describes how to perform operations on your computer using a

Web browser.

gg Related Links

• "Setting Up Crestron Connected Support" p.119

• "Controlling a Networked Projector Using Crestron Connected" p.119

• "Projector Setup Settings - ECO Menu" p.147

• "List of Functions" p.10

Setting Up Crestron Connected Support

To set up your projector for monitoring and control using a Crestron

Connected system, make sure your computer and projector are connected to

the network. If you are connecting wirelessly, set up the projector using the

Advanced network connection mode.

aPress the [Menu] button, select the Network menu, and press [Enter].

bSelect Network Configuration and press [Enter].

cSelect the Others menu and press [Enter].

dSet the Crestron Connected setting to On to allow the projector to be

detected.

eWhen you have finished selecting settings, select Complete and follow

the on-screen instructions to save your settings and exit the menus.

fTurn off the projector, and then turn it on again to enable the setting.

Controlling a Networked Projector Using Crestron

Connected

Once you have set up your projector to use Crestron Connected, you can

control and monitor projection using a compatible Web browser.

aStart your Web browser on a computer connected to the network.

Crestron Connected Support 120

bType the projector's IP address into the browser's address box and press

the computer's Enter key.

You see the Epson Web Control screen.

cSelect Crestron Connected.

You see this screen:

dSelect the input source that you want to control in the Sources List box.

You can scroll through available sources using the up and down arrows

in the box.

eTo control projection remotely, click the on-screen buttons that

correspond to the projector's remote control buttons. You can scroll

through button options at the bottom of the screen.

aThese on-screen buttons do not directly correspond to the

projector's remote control buttons:

•OK acts as the [Enter] button

•Menu displays the projector's menu

fTo view information about the projector, click the Info tab.

gTo change the projector, Crestron Control, and password settings, click

the Tools tab, select settings on the displayed screen, and then click

Send.

Crestron Connected Support 121

hWhen you finish selecting settings, click Exit to exit the program.

gg Related Links

• "Crestron Connected Operation Window" p.121

• "Crestron Connected Tools Window" p.122

Crestron Connected Operation Window

Settings on the operation window let you control the projector and adjust the

projection image.

APower Turns the projector on or off.

Vol-/Vol+ Adjusts the volume.

A/V Mute Turns the video and audio on or off.

BSwitches to the image from the selected input source. To display input sources

that are not shown in Sources List, click (a) or (b) to scroll up or down. The

current video signal input source is displayed in blue.

You can change the source name if necessary.

CFreeze Images are paused or released.

Contrast Adjusts the difference between light and shade in the

images.

Brightness Adjusts the image brightness.

Color Adjusts the color saturation for the images.

Sharpness Adjusts the image sharpness.

Zoom Enlarges or reduces the image without changing the

projection size. Click the arrow buttons to change the

position of an enlarged image.

DArrow buttons Performs the same operations as the arrow buttons on

the remote control.

OK Performs the same operation as [Enter] on the remote

control.

Menu Displays and closes the projector's menu.

Auto Optimizes Tracking,Sync., and Position in the

projector's Signal menu while projecting an analog

RGB signal from Computer1 or Computer2 port.

Search Changes to the next input source that is sending an

image.

Esc Performs the same operation as the [Esc] button on the

remote control.

ETools Changes settings in the projector that is currently

connected.

Info Displays information on the projector that is currently

connected.

Help Displays the Help Desk window. Used to send

messages to, and receive messages from, the

administrator using Crestron RoomView Express.

Crestron Connected Support 122

Crestron Connected Tools Window

Settings on the Tools window let you customize various projector setup

features.

AMake settings for Crestron central controllers.

BProjector Name Enter a name to differentiate the projector that is

currently connected from other projectors on the

network. (up to 16 alphanumeric characters)

Location Enter an installation location name for the projector

that is currently connected on the network. (up to 32

alphanumeric characters and symbols)

Assigned To Enter a user name for the projector. (up to 32

alphanumeric characters and symbols)

DHCP Select to use DHCP. You cannot enter an IP address if

DHCP is enabled.

IP Address Enter the IP address to assign to the currently

connected projector.

Subnet Mask Enter a subnet mask for the currently connected

projector.

Default Gateway Enter the gateway address for the currently connected

projector.

Send Click to confirm the changes made to the Projector.

CEnabled (Admin

Password)

Select to require a password to open the Tools window.

New Password Enter the new password when changing the password

to open the Tools window. (up to 26 alphanumeric

characters)

Confirm Enter the same password as you entered in New

Password. If the passwords are not the same, an error

is displayed.

Send Click to confirm the changes made to the Admin

Password.

Crestron Connected Support 123

DEnabled (User

Password)

Select to require a password to open the operation

window on the computer.

New Password Enter the new password when changing the password

to open the operation window. (up to 26 alphanumeric

characters)

Confirm Enter the same password as you entered in New

Password. If the passwords are not the same, an error

is displayed.

Send Click to confirm the changes made to the User

Password.

Setting Projector Event Schedules 124

You can schedule up to 30 events to occur automatically on your projector,

such as turning the projector on or off or switching the input source. The

projector performs the selected events on the specified date and time in the

schedule you set up.

Warning

Do not place flammable objects in front of the lens. If you schedule the projector

to turn on automatically, flammable objects in front of the lens could catch on a

fire.

a• If you set a Schedule Protection password, turn off your Schedule

Protection password first.

aSet the date and time in the Date & Time menu.

sExtended >Operation >Date & Time

bPress the [Menu] button, select the Extended menu, and press [Enter].

cSelect Schedule Settings and press [Enter].

dSelect Schedule and press [Enter].

eSelect Add New and press [Enter].

fSelect the event details you want to perform.

Setting Projector Event Schedules 125

gSelect the date and time at which you want the event to occur.

hSelect Save and press [Enter].

The scheduled events are displayed on the screen with icons indicating

the event status.

A: valid schedule

: regular schedule

: invalid schedule

BThe date currently selected (highlighted in yellow)

C: one time schedule

: regular schedule

: standby schedule (turns communication on or off during standby)

: invalid schedule

iTo edit a scheduled event, select the schedule and press [Esc].

jSelect an option from the menu displayed.

•On or Off lets you enable or disable the selected event.

Setting Projector Event Schedules 126

•Edit lets you change the event details or date and time.

•Clear lets you remove the scheduled event from a list.

kSelect Complete, then select Yes.

To delete all scheduled events, select Schedule Reset.

gg Related Links

• "List of Functions" p.10

• "Setting the Date and Time" p.43

• "Setting a Password" p.82

Adjusting the Menu Settings

Follow the instructions in these sections to access the projector menu system and change projector settings.

gg Related Links

• "Using the Projector's Menus" p.128

• "Using the Displayed Keyboard" p.129

• "Image Quality Settings - Image Menu" p.130

• "Input Signal Settings - Signal Menu" p.131

• "Projector Feature Settings - Settings Menu" p.132

• "Projector Setup Settings - Extended Menu" p.134

• "Projector Network Settings - Network Menu" p.137

• "Projector Setup Settings - ECO Menu" p.147

• "Projector Information Display - Info Menu" p.149

• "Projector Reset Options - Reset Menu" p.152

• "Copying Menu Settings Between Projectors (Batch Setup)" p.153

Using the Projector's Menus 128

You can use the projector's menus to adjust the settings that control how your

projector works. The projector displays the menus on the screen.

aPress the [Menu] button on the control panel or remote control.

You see the menu screen displaying the Image menu settings.

bPress the up or down arrow buttons to move through the menus listed

on the left. The settings for each menu are displayed on the right.

aThe available settings depend on the current input source.

cTo change settings in the displayed menu, press [Enter].

dPress the up or down arrow button to move through the settings.

eChange the settings using the buttons listed on the bottom of the menu

screens.

fTo return all the menu settings to their default values, select Reset.

gWhen you finish changing settings on a menu, press [Esc].

hPress [Menu] or [Esc] to exit the menus.

Using the Displayed Keyboard 129

You can use the displayed keyboard to enter numbers and characters.

aUse the arrow buttons on the control panel or remote control to

highlight the number or character you want to enter and press the

[Enter] button.

aEach time you select the CAPS key, the characters change

between upper case and lower case. Each time you select the

SYM1/2 key, the symbols enclosed by the frame change.

bAfter entering the text, select Finish on the keyboard to confirm your

entries. Select Cancel to cancel entering text.

aYou can select projector settings and control projection over a network

using a Web browser from your computer.

Some symbols cannot be entered using the displayed keyboard. Use

your Web browser to enter the text.

gg Related Links

• "Available Text Using the Displayed Keyboard" p.129

• "Controlling a Networked Projector Using a Web Browser" p.108

Available Text Using the Displayed Keyboard

You can enter the following text when using the displayed keyboard.

Text type Details

Numbers 0123456789

Alphabet ABCDEFGHIJKLMNOPQRSTUVWXY

abcdefghijklmnopqrstuvwxyz

Symbols ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ]

^_`{|}~

Image Quality Settings - Image Menu 130

Settings on the Image menu let you adjust the quality of your image for the

input source you are currently using. The available settings depend on the

currently selected input source.

To change settings for an input source, make sure the source is connected and

select that source.

Setting Options Description

Color Mode See the list of

available color

modes

Adjusts the vividness of image colors for

various image types and environments.

Brightness Varying levels

available

Lightens or darkens the overall image.

Contrast Varying levels

available

Adjusts the difference between light and

dark areas of the image.

Color Saturation Varying levels

available

Adjusts the intensity of the image colors.

Tint Varying levels

available

Adjusts the balance of green to magenta

tones in the image.

Sharpness Varying levels

available

Adjusts the sharpness or softness of

image details.

White Balance Adjusts the overall tint of the image.

Setting Options Description

Color Temp. Color Temp.: sets the color temperature

according to the color mode you selected.

Higher values tint the image blue and

lower values tint the image red.

Custom Custom: adjusts the individual R (red), G

(green), and B (blue) components of the

offset and gain.

Image

Enhancement

Adjusts the perceived resolution of the

image:

Noise Reduction Noise Reduction: reduces flickering in

analog images.

Deinterlacing

(For interlaced

signal

[480i/576i/1080i]

input)

Deinterlacing: sets whether or not to

convert interlaced-to-progressive signals

for certain video image types.

•Off: for fast-moving video images.

•Video: for most video images.

•Film/Auto: for movies, computer

graphics, and animation.

Auto Iris Off

Normal

High Speed

Adjusts the projected luminance based

on the image brightness.

Available when the Color Mode is set to

Dynamic or Cinema.

Reset — Resets all adjustment values on the

Image menu for the selected color mode

to their default settings.

a• The Brightness setting does not affect lamp brightness. To change

the lamp brightness mode, use the Power Consumption setting in

the projector's ECO menu.

gg Related Links

• "Available Color Modes" p.61

Input Signal Settings - Signal Menu 131

Normally the projector automatically detects and optimizes the input signal

settings. If you need to customize the settings, you can use the Signal menu.

The available settings depend on the currently selected input source.

aYou can restore the default settings of the Tracking,Sync., and

Position settings by pressing the [Auto] button on the remote control.

To change settings for an input source, make sure the source is connected and

select that source.

Setting Options Description

Resolution Auto

Wide

Normal

Sets the input signal resolution if not

detected automatically using the Auto

option.

Aspect See the list of

available aspect

ratios.

Sets the aspect ratio (width-to-height

ratio) for the selected input source.

Tracking Varying levels

available

Adjusts the signal to eliminate vertical

stripes in computer images.

Sync. Varying levels

available

Adjusts the signal to eliminate fuzziness

or flickering in computer images.

Setting Options Description

Position — Adjusts the image location on the screen.

Auto Setup On

Off

Automatically optimizes computer image

quality (when On).

Overscan Auto

Off

Changes the projected image ratio to

make the edges visible by a selectable

percentage or automatically.

Advanced Video Range Video Range: sets the video range to

match the setting of the device connected

to the HDMI port.

Video Signal Video Signal: specifies the signal type

from the input sources connected to the

Video ports. If interference appears or no

image appears when set to Auto, select

the appropriate signal according to the

connected equipment.

Reset — Resets all adjustment values on the

Signal menu to their default settings.

gg Related Links

• "Available Image Aspect Ratios" p.58

Projector Feature Settings - Settings Menu 132

Options on the Settings menu let you customize various projector features.

Setting Options Description

E-Zoom Varying levels

available

Adjusts the size of the projected image.

Keystone Adjusts image shape to rectangular

(horizontally and vertically).

H/V-Keystone H/V-Keystone: Select to manually

correct horizontal and vertical sides.

Auto V-Keystone: Turns automatic

correction on or off. (Available only for

models that support the Auto V-

Keystone function.)

H-Keystone Adjuster: Turns H-

Keystone Adjuster on or off. (Available

only for models that have the horizontal

keystone slider.)

Quick Corner Quick Corner: Select to correct image

shape and alignment using an on-screen

display.

Setting Options Description

Split Screen Screen Size

Source

Swap Screens

Audio Source

Align

Display the QR

Code

Exit Split Screen

Divides the viewing area horizontally and

displays two images side-by-side (press

[Esc] to cancel split screen display).

Volume Varying levels

available

Adjusts the volume of projector’s speaker

system.

You can also adjust the volume of

external speakers.

Setting values are saved for each source.

Mic Input Level Varying levels

available

Adjusts the input level from a

microphone.

When Mic Input Level is turned up, the

volume of the other connected device is

turned down; when it is turned down,

the volume of the other connected device

is turned up.

(Available only for models that have the

Mic port.)

Lock Setting Control Panel Lock Controls projector button locking to

secure the projector:

Full Lock: locks all buttons.

Partial Lock: locks all buttons except the

power button.

Off: no buttons locked.

Remote Receiver Front/Rear

Front

Rear

Off

Limits reception of remote control

signals by the selected receiver; Off turns

off all receivers.

Options vary depending on the number

of remote receivers equipped on the

projector.

Projector Feature Settings - Settings Menu 133

Setting Options Description

User Button Power

Consumption

Info

Deinterlacing

Test Pattern

Resolution

Mic Input Level

Pattern Display

Display the QR

Code

Assigns a menu option to the [User]

button on the remote control for one-

touch access.

Mic Input Level is available only for

models that have the Mic port.

Display the QR Code is available only

for models that support network

projection.

Pattern Selects various pattern display options.

Attention

If a pattern is displayed for a

long time, a residual image may

be visible in projected images.

Pattern Display Pattern Display: lets you display the

selected pattern type on the screen to aid

in presentation.

Pattern Type Pattern Type: select from Patterns 1 to 4

or User Pattern. Patterns 1 to 4 display

patterns pre-registered in the projector,

such as ruled lines or grid patterns.

User Pattern User Pattern: captures a projected screen

and saves it as a pattern for display.

Test Pattern Test Pattern: displays a test pattern to

assist in focusing and zooming the image

and correcting image shape (press the

[Esc] button to cancel pattern display).

Reset — Resets all adjustment values on the

Settings menu to their default settings,

except for the following:

•E-Zoom

•User Button

gg Related Links

• "List of Functions" p.10

Projector Setup Settings - Extended Menu 134

Settings on the Extended menu let you customize various projector setup

features.

Setting Options Description

Home Screen Selects the projector's Home screen

display options:

Home Screen Auto

Disp.

Home Screen Auto Disp.: select whether

or not to display the Home screen

automatically when there is no input

signal when turning on the projector.

Custom Function 1

Custom Function 2

Custom Function 1/Custom Function

2: select to set functions and the display

as the customized Home screen.

Display Selects various display options:

Messages Messages: set to On to display messages

such as input source name, color mode

name, aspect ratio, no signal message, or

high temperature warning on your

projected image. Set to Off if you do not

want to display messages.

Setting Options Description

Display

Background

Display Background: sets the screen

color or logo to display when no signal is

received.

Startup Screen Startup Screen: set to On to display a

logo when the projector starts up.

A/V Mute A/V Mute: sets the screen color or logo

to display when A/V Mute is turned on.

User's Logo — Creates a screen that the projector

displays to identify itself and enhance

security.

Projection Front

Front/Ceiling

Rear

Rear/Ceiling

Selects the way the projector faces the

screen so the image is oriented correctly.

Operation Selects various operation options:

Direct Power On Direct Power On: lets you turn on the

projector by plugging it in without

pressing the power button.

High Altitude

Mode

High Altitude Mode: regulates the

projector’s operating temperature at

altitudes above 1500 m.

Auto Source Search Auto Source Search: set to On to detect

the input signal automatically and

project images when there is no input

signal.

Projector Setup Settings - Extended Menu 135

Setting Options Description

Auto Power On Auto Power On: select the image source

from which you want to automatically

start projection. When the projector

detects the input signal from the selected

image source, it projects automatically in

standby mode.

The following image sources are available

for this feature:

• HDMI1

• HDMI

• Computer1

• Computer

• USB Display

HDMI EQ Setting HDMI EQ Setting: Adjust the HDMI

input signal level depending on the

devices connected to the HDMI port. If

there is a lot of interference in the image,

or if a problem such as no image being

projected occurs, change the setting.

If no images are displayed using a

thumb-sized media streaming device,

select 1.

Advanced Log Save Destination: sets the location

in which to save error and operation log

files. (Available only for models that have

a USB-A port.)

Batch Setup Range: select All to copy all

of the projector menu settings using the

batch setup feature. Select Limited, if you

do not want to copy the following

settings:

•Password Protection settings

•Network menu settings

Setting Options Description

Date & Time Date & Time: adjusts the projector's

system time and date settings.

(Available only for models that support

the Schedule function.)

•Daylight Saving Time: set to On to

activate daylight saving time.

•Internet Time: set to On to update the

time automatically through an Internet

time server.

A/V Settings Selects various audio and video output

settings:

A/V Output A/V Output: set to Always On to output

audio and images to external devices

when the projector is in standby mode.

Audio Settings Audio Output: selects the audio input

port when projecting images from

anything except for HDMI ports.

(Available only for models that have

multiple audio input ports.)

HDMI Audio Output/HDMI1 Audio

Output/HDMI2 Audio Output: selects

the audio input port when projecting

images from HDMI ports. (Options vary

depending on the number of HDMI

ports on the projector.)

Projector ID Off

1 through 9

Assigns an ID for the projector when you

use multiple projectors.

Schedule Settings To Schedule

Settings menu

Schedules projector events to occur

automatically at selected dates and times.

(Available only for models that support

the Schedule function.)

Language Various languages

available

Select the language for projector menu

and message displays.

Projector Setup Settings - Extended Menu 136

Setting Options Description

Reset — Resets all adjustment values on the

Extended menu to their default settings,

except for the following:

•User's Logo

•Projection

•High Altitude Mode

•Auto Source Search

•HDMI EQ Setting

•Date & Time

•A/V Output

•Projector ID

•Schedule Settings

•Language

aWhen you set User's Logo Protection to On in the Password

Protection screen, you cannot change settings related to user's logo

display (Display Background,Startup Screen,A/V Mute in the

Display setting). Set User's Logo Protection to Off first.

gg Related Links

• "List of Functions" p.10

• "Selecting Password Security Types" p.83

Projector Network Settings - Network Menu 137

Settings on the Network menu let you view network information and set up

the projector for controlling over a network.

This menu is available only for models that support network projection.

When you set Network Protection to On in the Password Protection screen,

you cannot change the network settings. Set Network Protection to Off first.

Setting Options Description

Screen Mirroring * On

Off

Configures your Screen Mirroring

settings.

Select On to project with the Screen

Mirroring features.

Screen Mirroring

Info *

Display Name

MAC Address

Region Code

Channel

Connected Device

Displays Screen Mirroring status and

details.

Available when you have set Screen

Mirroring to On.

Screen Mirroring

Settings *

To Screen

Mirroring Settings

Configures your Screen Mirroring

settings.

Setting Options Description

Wireless LAN

Power

Off

Configures your wireless LAN settings.

Select On to project images via a wireless

LAN. If you do not want to connect via

wireless LAN, turn it off to prevent

unauthorized access by others.

Net. Info. -

Wireless LAN

Connection Mode

Wireless LAN Sys.

Antenna Level

Projector Name

SSID

DHCP

IP Address

Subnet Mask

Gateway Address

MAC Address

Region Code

IPv6

Displays wireless network status and

details. (Available only for models that

support wireless LAN projection.)

Available when you have set Wireless

LAN Power to On.

The following settings are displayed

when you select the IPv6 option.

• IPv6 Address (Manual)

• IPv6 Address

• Prefix Length

• Gateway Address

• IPv6 Address (Auto)

• Temporary Address

• Link-local Address

• Stateless Address

• Stateful Address

Projector Network Settings - Network Menu 138

Setting Options Description

Net. Info. - Wired

LAN

Projector Name

DHCP

IP Address

Subnet Mask

Gateway Address

MAC Address

IPv6 Address

(Manual)

IPv6 Address

(Auto)

Displays wired network status and

details. (Available only for models that

support wired LAN projection.)

The following settings are displayed

when you select the IPv6 Address

(Manual) or IPv6 Address (Auto)

option.

• IPv6 Address (Manual)

• IPv6 Address

• Prefix Length

• Gateway Address

• IPv6 Address (Auto)

• Temporary Address

• Link-local Address

• Stateless Address

• Stateful Address

Display the QR

Code

— Displays a QR code for connecting with

iOS or Android devices using the Epson

iProjection app.

Network

Configuration

To additional

network menus

Configures your network settings.

* Available only for models that support Screen Mirroring.

aOnce you have connected your projector to your network, you can

select projector settings and control projection using a compatible Web

browser. This allows you to access the projector remotely.

gg Related Links

• "Network Menu - Screen Mirroring Settings" p.138

• "Network Menu - Basic Menu" p.139

• "Network Menu - Wireless LAN Menu" p.140

• "Network Menu - Wired LAN Menu" p.143

• "Network Menu - Notifications Menu" p.144

• "Network Menu - Others Menu" p.145

• "Network Menu - Reset Menu" p.146

• "List of Functions" p.10

• "Selecting Password Security Types" p.83

Network Menu - Screen Mirroring Settings

Settings on the Screen Mirroring Settings menu let you select the Screen

Mirroring settings.

sNetwork >Screen Mirroring Settings

This menu is available only for models that support Screen Mirroring.

Setting Options Description

Display Name Up to 32

alphanumeric

characters

Enter a name to identify the projector

when searching for the projector using

the screen mirroring feature.

Operation Mode Basic

Extended

Select Extended to connect with

advanced options.

Projector Network Settings - Network Menu 139

Setting Options Description

Basic Wireless LAN Sys. Sets the communication method between

the projector and the mobile device.

You can select the following methods:

• 802.11a/g/n/ac (Wi-Fi 5)

• 802.11a/g/n (Wi-Fi 4)

• 802.11g/n (Wi-Fi 4)

The available methods vary depending

on countries and regions.

Adjust Image

Quality

Adjusts the screen mirroring

speed/quality.

When you want to increase image

quality, select a small number. When you

want to increase processing speed, select

a large number.

Connection Mode Selects the security type when you

connect to the network wirelessly. Select

PIN to improve the connection security.

If your mobile device supports only the

PBC connection, select PIN/PBC.

Available when you have set Operation

Mode to Basic.

Extended Available when you have set Operation

Mode to Extended.

Meeting Mode Selects the type of meeting.

•Interruptions OK: lets you connect to

another mobile device during Screen

Mirroring projection.

•No Interruptions: lets you exclusively

connect to one device.

Channel Selects the wireless channel used by

Screen Mirroring.

Display Display PIN Code Set to On to display the eight-digit PIN

code on the projected image when

projecting input sources other than

Screen Mirroring.

Setting Options Description

Display Device

Name

Set to On to display the newly connected

device name on the projected image

when projecting input sources other than

Screen Mirroring.

Reset — Resets all adjustment values on the

Screen Mirroring Settings menu to their

default settings.

gg Related Links

• "List of Functions" p.10

Network Menu - Basic Menu

Settings on the Basic menu let you select the basic network settings.

sNetwork >Network Configuration >Basic

Projector Network Settings - Network Menu 140

Setting Options Description

Projector Name Up to 16

alphanumeric

characters

(do not use " * + ,

/:;<=>?[\]`|

spaces)

Enter a name to identify the projector

over the network.

PJLink Password Up to 32

alphanumeric

characters

Enter a password for using the PJLink

protocol for projector control.

Remote Password Up to 8

alphanumeric

characters

(do not use * :

spaces)

Enter a password for accessing the

projector using the Basic Control. (User

name is EPSONREMOTE; default

password is guest.)

Web Control

Password

Up to 8

alphanumeric

characters

(do not use * :

spaces)

Enter a password for accessing the

projector over the Web. (User name is

EPSONWEB; default password is

admin.)

Moderator

Password

Four-digit number Enter a password for accessing the

projector as a moderator using Epson

iProjection. (No password is set by

default.)

Projector Keyword On

Off

Set to On to enable a security password

to prevent access to the projector by

anyone not in the same room as the

projector. You must enter a displayed,

randomized keyword from a computer

using Epson iProjection to access the

projector and share the current screen.

Display Keyword On

Off

Set to On to display a projector keyword

on the projected image when accessing

the projector using Epson iProjection.

Available when Projector Keyword is set

to On.

Setting Options Description

Display LAN Info. Text & QR Code

Text

Set the display format for the projector's

network information.

By simply reading the QR code with

Epson iProjection, you can connect the

mobile device to the projector through a

network. The default value is Text & QR

Code.

gg Related Links

• "List of Functions" p.10

Network Menu - Wireless LAN Menu

Settings on the Wireless LAN menu let you select the wireless LAN settings.

sNetwork >Network Configuration >Wireless LAN

This menu is available only for models that support wireless LAN projection.

Projector Network Settings - Network Menu 141

Setting Options Description

Connection Mode Select the type of wireless connection:

Quick Quick: lets you connect to multiple

smartphones, tablets, or computers

directly using wireless communication.

When you select Quick connection

mode, the projector acts as an easy access

point. (We recommend limiting the

number of devices to six or less to

maintain the projection performance.)

Advanced Advanced: lets you connect to multiple

smartphones, tablets, or computers over

a wireless network access point.

Search Access Point To Search View Search for available wireless network

access points in Advanced connection

mode. Depending on the access point

settings, they may not be displayed in the

list.

SSID Up to 32

alphanumeric

characters

Sets the SSID (network name) of the

wireless LAN system the projector is

connecting to.

Security Selects the type of security used on the

wireless network.

When setting security, follow the

instructions from the administrator of

the network system you want to connect

to.

Open Security is not set.

WPA2-PSK Communication is performed using

WPA2 security. Uses AES method for

encryption. When establishing a

connection from a computer to the

projector, enter the value set in the

passphrase.

Setting Options Description

WPA3-PSK Communication is performed using

WPA3 security. Uses AES method for

encryption. When establishing a

connection from a computer to the

projector, enter the value set in the

passphrase.

WPA2/WPA3-PSK Connects in WPA2/WPA3 personal

mode. Encryption method is selected

automatically according to the access

point settings. Set a passphrase which is

the same for the access point.

WPA3-EAP Connects in WPA3 enterprise mode.

Encryption method is selected

automatically according to the access

point settings.

WPA2/WPA3-EAP Connects in WPA2/WPA3 enterprise

mode. Encryption method is selected

automatically according to the access

point settings.

Passphrase Various

passphrases from 8

to 32 characters

(when entering

from a Web

browser: various

passphrases from 8

to 63 characters)

For WPA2-PSK,WPA3-PSK and

WPA2/WPA3-PSK security, selects the

pre-shared passphrase used on the

network.

When the passphrase is entered and the

[Enter] button is pressed, the value is set

and displayed as an asterisk (*).

We recommend changing the passphrase

periodically for security. If the network

settings are initialized, it returns to the

initial passphrase.

EAP Method Set the EAP settings for WPA3-EAP and

WPA2/WPA3-EAP security.

Projector Network Settings - Network Menu 142

Setting Options Description

EAP Type EAP Type: selects the protocol for

authentication.

•PEAP: authentication protocol widely

used in Windows Server.

•PEAP-TLS: authentication protocol

used in Windows Server. Select this

when using a client certificate.

•EAP-TLS: authentication protocol

widely used to use a client certificate.

•EAP-FAST: select this when these

authentication protocols are used.

User name User name: Enter up to 64 alphanumeric

characters. You can enter up to 32

alphanumeric characters in the projector

menu. To enter more than 32 characters,

use your Web browser. You can enter a

domain name by adding it before the

user name and separating them with a

backslash (domain\username).

When importing a client certificate, the

name the certificate was issued to is

automatically set.

Password Password: Enter a password up to 64

alphanumeric characters for

authentication when EAP Type is set to

PEAP or EAP-FAST. You can enter up

to 32 alphanumeric characters in the

projector menu. To enter more than 32

characters, use your Web browser. After

you enter the password and select Set,

the password is displayed as an asterisk

(*).

Client Certificate Client Certificate: imports the client

certificate when EAP Type is set to

PEAP-TLS or EAP-TLS.

Verify Server Cert. Verify Server Cert.: Set to On to verify

the server certificate when a CA

certificate has been set.

Setting Options Description

CA certificate CA certificate: imports the CA

certificate.

RADIUS

Serv.Name

RADIUS Serv.Name: Enter the server

name you want to verify. You can enter

up to 64 alphanumeric characters. To

enter more than 32 characters, use your

Web browser.

Channel Various channels

available

In Quick connection mode, selects the

frequency band (channel) used by the

wireless LAN.

IP Settings DHCP

IP Address

Subnet Mask

Gateway Address

DHCP: set to On if your network assigns

addresses automatically; set to Off to

manually enter the network's IP

Address,Subnet Mask, and Gateway

Address using 0 to 255 for each address

field.

Do not use these addresses: 0.0.0.0,

127.x.x.x, 192.0.2.x or 224.0.0.0 through

255.255.255.255 (where x is a number

from 0 to 255) for IP Address,

255.255.255.255 or 0.0.0.0 through

254.255.255.255 for Subnet Mask, and

0.0.0.0, 127.x.x.x or 224.0.0.0 through

255.255.255.255 for Gateway Address.

SSID Display On

Off

Select whether to display the SSID on the

network standby screen and Home

screen.

IP Address Display On

Off

Select whether to display the IP address

on the network standby screen and

Home screen.

IPv6 Settings Select the IPv6 settings if you want to

connect the projector to the network

using IPv6:

IPv6 IPv6: set to On if you want to connect

the projector to the network using IPv6.

IPv6 is supported to monitor and control

the projector over a network using Epson

Web Control and PJLink.

Projector Network Settings - Network Menu 143

Setting Options Description

Auto Configuration Auto Configuration: set to On to assign

addresses automatically according to the

Router Advertisement.

Use Temporary

Address

Use Temporary Address: set to On if

you want to use a temporary IPv6

address.

gg Related Links

• "List of Functions" p.10

Network Menu - Wired LAN Menu

Settings on the Wired LAN menu let you select the wired LAN settings.

sNetwork >Network Configuration >Wired LAN

This menu is available only for models that support wired LAN projection.

Setting Options Description

IP Settings DHCP

IP Address

Subnet Mask

Gateway Address

DHCP: set to On if your network assigns

addresses automatically; set to Off to

manually enter the network's IP

Address,Subnet Mask, and Gateway

Address using 0 to 255 for each address

field.

Do not use these addresses: 0.0.0.0,

127.x.x.x, 192.0.2.x or 224.0.0.0 through

255.255.255.255 (where x is a number

from 0 to 255) for IP Address,

255.255.255.255 or 0.0.0.0 through

254.255.255.255 for Subnet Mask, and

0.0.0.0, 127.x.x.x or 224.0.0.0 through

255.255.255.255 for Gateway Address.

IP Address Display On

Off

Select whether to display the IP address

on the network standby screen.

IPv6 Settings Select the IPv6 settings if you want to

connect the projector to the network

using IPv6:

IPv6 IPv6: set to On if you want to connect

the projector to the network using IPv6.

IPv6 is supported to monitor and control

the projector over a network using Epson

Web Control and PJLink.

Auto Configuration Auto Configuration: set to On to assign

addresses automatically according to the

Router Advertisement.

Use Temporary

Address

Use Temporary Address: set to On if

you want to use a temporary IPv6

address.

gg Related Links

• "List of Functions" p.10

Projector Network Settings - Network Menu 144

Network Menu - Notifications Menu

Settings on the Notifications menu let you receive an email notification if a

problem or warning occurs in the projector.

sNetwork >Network Configuration >Notifications

Setting Options Description

Mail Notification On

Off

Set to On to send an email to the preset

addresses when a problem or warning

occurs with a projector.

SMTP Server IP address Enter the IP address for the projector's

SMTP server using 0 to 255 for each

address field.

Do not use these addresses: 127.x.x.x,

192.0.2.x or 224.0.0.0 through

255.255.255.255 (where x is a number

from 0 to 255).

Port Number 0 to 65535 (default

is 25)

Select a number for the SMTP server

Port Number.

Setting Options Description

From Up to 32

alphanumeric

characters

Up to 64

alphanumeric

characters from the

Web browser

(do not use " ( ) , : ;

< > [ \ ] spaces)

Enter the email address of the sender.

Address 1 Setting

Address 2 Setting

Address 3 Setting

Enter the e-mail address, and select the

alerts you want to receive. Repeat for up

to three addresses.

SNMP On

Off

Set to On to monitor the projector using

SNMP. To monitor the projector, you

need to install the SNMP manager

program on your computer. SNMP

should be managed by a network

administrator.

Trap IP Address 1

Trap IP Address 2

IP address Enter up to two IP addresses to receive

SNMP notifications, using 0 to 255 for

each address field.

Do not use these addresses: 127.x.x.x or

224.0.0.0 through 255.255.255.255

(where x is a number from 0 to 255).

Community Name Up to 32

alphanumeric

characters

(do not use spaces

and any symbols

other than @)

Set the SNMP community name.

PJLink Notification On

Off

Enables or disables the PJLink

notification function.

Available only for models that support

wired LAN projection.

Projector Network Settings - Network Menu 145

Setting Options Description

Notified IP Address IP address Enter the IP address to receive the

projector's operating status when the

PJLink notification function is enabled.

Enter the addresses using 0 to 255 for

each address field.

Do not use these addresses: 127.x.x.x or

224.0.0.0 through 255.255.255.255

(where x is a number from 0 to 255).

Available only for models that support

wired LAN projection.

gg Related Links

• "List of Functions" p.10

Network Menu - Others Menu

Settings on the Others menu let you select other network settings.

sNetwork >Network Configuration >Others

Setting Options Description

Secure HTTP On

Off

To strengthen security, communication

between the projector and computer in

Web control is encrypted. When setting

security with Web control, it is

recommended to set this to On.

Web Server Cert. — Imports the Web server certificate for

secure HTTP.

Priority Gateway * Wired LAN

Wireless LAN

You can set the priority gateway.

AMX Device

Discovery *

Off

Set to On when you want to allow the

projector to be detected by AMX Device

Discovery.

Crestron

Connected *

Off

Set to On only when monitoring or

controlling the projector over the

network using Crestron Connected.

Enabling Crestron Connected disables

the Epson Message Broadcasting feature

in the Epson Projector Management

software.

Control4 SDDP * On

Off

Set to On to allow device information to

be acquired using Control4 Simple

Device Discovery Protocol (SDDP).

Message

Broadcasting

Off

Set to On to receive the message

delivered by Epson Projector

Management. See the Epson Projector

Management Operation Guide for details.

Available only when Crestron

Connected is set to Off.

* Available only for models that support wired LAN projection.

gg Related Links

• "Crestron Connected Support" p.119

• "List of Functions" p.10

Projector Network Settings - Network Menu 146

Network Menu - Reset Menu

Settings on the Reset menu let you reset all of the network settings.

sNetwork >Network Configuration >Reset

Setting Options Description

Reset network

settings.

Yes

Select Yes to reset all network settings.

Projector Setup Settings - ECO Menu 147

Settings on the ECO menu let you customize projector functions to save

power.

When you select a power-saving setting, a leaf icon appears next to the menu

item.

Setting Options Description

Power

Consumption

High

Medium

ECO

Selects the brightness mode of the

projector lamp. You cannot select

settings when you use your projector at

high altitude or in locations subject to

high temperatures.

Select ECO to reduce lamp brightness

and fan noise, and to save power and

lamp life.

Options vary depending on the projector

model.

Setting Options Description

Light Optimizer On

Off

When set to On, the lamp brightness is

adjusted according to the projected

image. This helps to reduce the power

consumption by lowering the lamp

brightness according to the scene being

projected.

The setting is stored for each Color

Mode.

This item is enabled when:

•Power Consumption is set to High or

Medium.

•Auto Iris is set to Off.

sImage >Auto Iris

Sleep Mode On

Off

Automatically turns off the projector

after an interval of inactivity (when On).

Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode.

Lens Cover Timer On

Off

Automatically turns off the projector

after 30 minutes if the lens cover is

closed (when On).

A/V Mute Timer On

Off

Automatically turns off the projector

after 30 minutes if A/V Mute is enabled

(when On).

Standby Mode * Available when you have set A/V Output

to While Projecting.

Projector Setup Settings - ECO Menu 148

Setting Options Description

Standby Mode Communication On indicates that the

projector can be monitored over a

network when the projector is in standby

mode. Enable this setting to allow the

following operations to occur when the

projector is in standby mode:

• Monitor and control the projector over

a network

Communication On is automatically

selected when A/V Output is set to

Always On.

sExtended >A/V Settings >A/V

Output

Port Selects the port to use from Wired LAN

or Wireless LAN while the Standby

Mode setting is set to Communication

On.

Standby Mode ** Communication

Communication

Off

Communication On indicates that the

projector can be monitored over a

network when the projector is in standby

mode. Enable this setting to allow the

following operations to occur when the

projector is in standby mode:

• Monitor and control the projector over

a network

Communication On is automatically

selected when A/V Output is set to

Always On.

sExtended >A/V Settings >A/V

Output

ECO Display On

Off

Displays a leaf icon in the bottom left

corner of the projected screen to indicate

the power-saving status when the lamp

brightness changes (when On).

Reset — Resets all adjustment values on the ECO

menu to their default settings, except for

Standby Mode.

* Available only for models that support wired LAN and wireless LAN

projection.

** Available only for models that support wireless LAN projection.

a• When the Sleep Mode Timer setting is enabled, the lamp dims for a

short time before the timer limit is reached and the projector turns

off.

• When the Lens Cover Timer or A/V Mute Timer settings are

enabled, the lamp uses less power when the lens cover is closed or

A/V Mute is activated.

gg Related Links

• "Projector Setup Settings - Extended Menu" p.134

• "List of Functions" p.10

Projector Information Display - Info Menu 149

You can display information about the projector and version by viewing the

Info menu. However, you cannot change any settings in the menu.

Information item Description

Projector Info Displays the projector information.

Version Displays the projector's firmware version.

Temp Warning Info Displays various high temperature warnings.

Power On/Off History Displays the projector's power on and power off

history. (Available only for models that support the

Schedule function.)

gg Related Links

• "Info Menu - Projector Info Menu" p.149

• "List of Functions" p.10

Info Menu - Projector Info Menu

You can display information about the projector and input sources by viewing

the Projector Info menu in the projector's Info menu.

aThe available settings depend on the current input source.

The lamp usage timer does not register any hours until you have used

the lamp for at least 10 hours.

Information item Description

Lamp Hours Displays the number of hours (H) the lamp has been

used in each Power Consumption mode; if the

information is displayed in yellow, obtain a genuine

Epson replacement lamp soon.

sECO >Power Consumption

Source Displays the name of the port to which the current

input source is connected.

Input Signal Displays the input signal setting of the current input

source.

Resolution Displays the resolution of the current input source.

Projector Information Display - Info Menu 150

Information item Description

Refresh Rate Displays the refresh rate of the current input source.

Sync Info Displays information that may be needed by a service

technician.

Status Displays information about projector problems that

may be needed by a service technician.

Serial Number Displays the projector's serial number.

Event ID Displays the Event ID number corresponding to a

network problem; see the list of Event ID codes.

(Available only for models that support network

projection.)

gg Related Links

• "Event ID Code List" p.150

• "List of Functions" p.10

Event ID Code List

If the Event ID option on the Projector Info menu displays a code number,

check this list of Event ID codes for the solution to the projector problem

associated with the code.

If you cannot resolve the problem, contact your network administrator or

Epson for technical support.

Event ID

code

Cause and solution

0432

0435

The network software did not start. Turn the projector off and then

on again.

0433 Cannot display the transferred images. Restart the network software.

0434

0481

0482

0485

Unstable network communication. Check the network

communication status, wait a few moments, and try connecting to

the network again.

Event ID

code

Cause and solution

0483

04FE

The network software quit unexpectedly. Check the network

communication status, then turn the projector off and then on again.

0484 Communication with computer was disconnected. Restart the

network software.

0479

04FF

A projector system error has occurred. Turn the projector off and

then on again.

0891 Cannot find an access point with the same SSID. Set your computer,

access point, and projector to the same SSID.

0892 The WPA/WPA2/WPA3 authentication type does not match. Make

sure the wireless network security settings are correct.

0893 The TKIP/AES encryption type does not match. Make sure the

wireless network security settings are correct.

0894 Communication with an unauthorized access point was

disconnected. Contact your network administrator.

0895 Communication with a connected device was disconnected. Check

your device connection status.

0898 Failed to acquire DHCP. Make sure the DHCP server is operating

correctly. If you are not using DHCP, set the DHCP setting to Off in

the projector's Network menu.

sNetwork >Network Configuration >Wireless LAN >IP

Settings >DHCP

sNetwork >Network Configuration >Wired LAN >IP Settings

>DHCP

0899 Other communication errors.

089A The EAP authentication type does not match the network. Check the

wireless LAN security settings and make sure that the security

certificate is installed correctly.

089B EAP server authentication failed. Check the wireless LAN security

settings and make sure that the security certificate is installed

correctly.

089C EAP client authentication failed. Check the wireless LAN security

settings and make sure that the security certificate is installed

correctly.

Projector Information Display - Info Menu 151

Event ID

code

Cause and solution

089D Key exchange failed. Check the wireless LAN security settings and

make sure that the security certificate is installed correctly.

gg Related Links

• "List of Functions" p.10

Projector Reset Options - Reset Menu 152

You can reset most of the projector settings to their default values using the

Reset menu.

Setting Options Description

Reset Lamp Hours — Reset the projector's lamp usage timer to

zero when you replace the lamp.

Reset All Config — Resets most of the projector settings to

their default values.

You cannot reset the following settings using the Reset All Config option:

• E-Zoom

• User's Logo

• Display Background *

• Startup Screen *

• A/V Mute *

• Schedule Settings

• Language

• Date & Time

• Network menu items

• Lamp Hours

• Password

* Only when you set the User's Logo Protection setting to On in the

Password Protection setting menu.

Copying Menu Settings Between Projectors (Batch Setup) 153

After selecting the projector's menu settings for one projector, you can use the

following methods to copy the settings to other projectors, as long as they are

the same model.

• by using a USB flash drive (Available only for models that have a USB-A

port.)

• by connecting a computer and projector using a USB cable

• by using Epson Projector Management (Available only for models that have

a LAN port.)

Menu settings such as the following are not copied to the other projector.

•Network menu settings (except for the Notifications menu and the Others

menu)

•Lamp Hours and Status from the Projector Info menu

a• Perform batch setup before adjusting the image settings such as

keystone distortion correction. Since image adjustment values are

also copied to another projector, the adjustments you made before

performing the batch setup are overwritten and the projected screen

you adjusted may change.

• When copying the menu settings from one projector to another,

user's logo is also copied. Do not register the information that you do

not want to share between multiple projectors as a user's logo.

• Make sure Batch Setup Range is set to Limited if you do not want to

copy the following settings:

•Password Protection settings

•Network menu settings (except for the Notifications menu and

the Others menu)

sExtended >Operation >Advanced >Batch Setup Range

Caution

Epson takes no responsibility for batch setup failures and associated repair costs

due to power outages, communication errors, or other problems that may cause

such failures.

gg Related Links

• "Transferring Settings From a USB Flash Drive" p.153

• "Transferring Settings From a Computer" p.154

• "List of Functions" p.10

Transferring Settings From a USB Flash Drive

You can copy menu settings from one projector to another of the same model

using a USB flash drive.

aThe USB flash drive must use a FAT format and not incorporate any

security function. Delete any files on the drive before using it for batch

setup or the settings may not be saved correctly.

aDisconnect the power cord from the projector, and check that all of the

projector's indicators have turned off.

bConnect an empty USB flash drive directly to the projector's USB-A

port.

cHold down the [Esc] button on the remote control or the control panel

and connect the power cord to the projector.

dWhen all of the projector's indicators turn on, release the [Esc] button.

The indicators start flashing and the batch setup file is written to the

USB flash drive. When writing is finished, the projector turns off.

Caution

Do not disconnect the power cord or the USB flash drive from the projector

while the file is being written. If the power cord or USB flash drive is

disconnected, the projector may not start correctly.

eRemove the USB flash drive.

Copying Menu Settings Between Projectors (Batch Setup) 154

aThe file name for the batch setup file is PJCONFDATA.bin. If

you need to change the file name, add text after PJCONFDATA

using only alphanumeric characters. If you change the

PJCONFDATA section of the file name, the projector may not be

able to recognize the file correctly.

fDisconnect the power cord from the projector to which you want to

copy settings, and check that all of the projector's indicators have

turned off.

gConnect the USB flash drive containing the saved batch setup file to the

projector's USB-A port.

hHold down the [Menu] button on the remote control or the control

panel and connect the power cord to the projector.

iWhen all of the projector's indicators turn on, release the [Menu]

button.

When all of the indicators start flashing, the settings are being written.

When writing is finished, the projector turns off.

Caution

Do not disconnect the power cord or the USB flash drive from the projector

while the file is being written. If the power cord or USB flash drive is

disconnected, the projector may not start correctly.

jRemove the USB flash drive.

Transferring Settings From a Computer

You can copy menu settings from one projector to another of the same model

by connecting the computer and projector with a USB cable.

aYou can use this batch setup method with the following operating

system versions:

• Windows 7 and later

• OS X 10.11.x and later

aDisconnect the power cord from the projector, and check that all of the

projector's indicators have turned off.

bConnect a USB cable to the computer's USB port and to the projector's

USB-B port.

cHold down the [Esc] button on the remote control or the control panel

and connect the power cord to the projector.

dWhen all of the projector's indicators turn on, release the [Esc] button.

The computer recognizes the projector as a removable disk.

eOpen the removable disk icon or folder, and save the batch setup file to

the computer.

aThe file name for the batch setup file is PJCONFDATA.bin. If

you need to change the file name, add text after PJCONFDATA

using only alphanumeric characters. If you change the

PJCONFDATA section of the file name, the projector may not be

able to recognize the file correctly.

fEject the USB device (Windows) or drag the removable disk icon to the

Trash (Mac).

gDisconnect the USB cable.

The projector turns off.

hDisconnect the power cord from the projector to which you want to

copy settings, and check that all of the projector's indicators have

turned off.

Copying Menu Settings Between Projectors (Batch Setup) 155

iConnect the USB cable to the computer's USB port and to the

projector's USB-B port.

jHold down the [Menu] button on the remote control or the control

panel and connect the power cord to the projector.

kWhen all of the projector's indicators turn on, release the [Menu]

button.

The computer recognizes the projector as a removable disk.

lCopy the batch setup file (PJCONFDATA.bin) that you saved to your

computer to the top level folder of the removable disk.

aDo not copy any files or folders other than the batch setup file to

the removable disk.

mEject the USB device (Windows) or drag the removable disk icon to the

Trash (Mac).

nDisconnect the USB cable.

When all of the indicators start flashing, the settings are being written.

When writing is finished, the projector turns off.

Caution

Do not disconnect the power cord from the projector while the file is being

written. If the power cord is disconnected, the projector may not start

correctly.

gg Related Links

• "Batch Setup Error Notification" p.155

Batch Setup Error Notification

The projector's indicators notify you if an error occurs during a batch setup

operation. Check the status of the projector's indicators and follow the

instructions described in the table here.

Indicator status Problem and solutions

• Lamp: Orange - flashing

fast

• Temp: Orange - flashing

fast

The batch setup file may be corrupt, or the USB flash

drive or USB cable may not be connected correctly.

Disconnect the USB flash drive or the USB cable,

unplug and then plug in the projector's power cord, and

then try again.

• Power: Blue - flashing

fast

• Status: Blue - flashing

fast

• Lamp: Orange - flashing

fast

• Temp: Orange - flashing

fast

Writing the settings may have failed and an error may

have occurred in the projector's firmware.

Stop using the projector, remove the power plug from

the electrical outlet. Contact Epson for help.

gg Related Links

• "Projector Indicator Status" p.169

Maintaining the Projector

Follow the instructions in these sections to maintain your projector.

gg Related Links

• "Projector Maintenance" p.157

• "Cleaning the Lens" p.158

• "Cleaning the Projector Case" p.159

• "Air Filter and Vent Maintenance" p.160

• "Projector Lamp Maintenance" p.163

Projector Maintenance 157

You may need to clean the projector's lens periodically, and clean the air filter

and air vents to prevent the projector from overheating due to blocked

ventilation.

The only parts you should replace are the lamp, air filter, and remote control

batteries. If any other part needs replacing, contact Epson or an authorized

Epson servicer.

Warning

Before cleaning any part of the projector, turn it off and unplug the power cord.

Never open any cover on the projector, except as specifically explained in this

manual. Dangerous electrical voltages in the projector can injure you severely.

Cleaning the Lens 158

Clean the projector's lens periodically, or whenever you notice dust or

smudges on the surface.

• To remove dust or smudges, gently wipe the lens with lens-cleaning paper.

• To remove stubborn smudges, moisten a soft, lint-free cloth with lens

cleaner and gently wipe the lens. Do not spray any liquid directly on the

lens.

Warning

Do not use a lens cleaner that contains flammable gas. The high heat generated

by the projector lamp may cause a fire.

Attention

Do not use glass cleaner or any harsh materials to clean the lens and do not

subject the lens to any impacts; otherwise, it could be damaged. Do not use

canned air, or the gases may leave a flammable residue.

Cleaning the Projector Case 159

Before cleaning the projector case, turn off the projector and unplug the

power cord.

• To remove dust or dirt, use a soft, dry, lint-free cloth.

• To remove stubborn dirt, use a soft cloth moistened with water and mild

soap. Do not spray liquid directly on the projector.

Attention

Do not use wax, alcohol, benzene, paint thinner, or other chemicals to clean the

projector case. These can damage the case. Do not use canned air, or the gases

may leave a flammable residue.

Air Filter and Vent Maintenance 160

Regular filter maintenance is important to maintaining your projector. Clean

the air filer when a message appears telling you the temperature inside the

projector has reached a high level. It is recommended that you clean these

parts over a 10,000‑hour* or 6,000‑hour* period. Clean them more often than

this if you use the projector in a particularly dusty environment.

* See "Projector Specifications" in the Appendix for the air filter maintenance

period by model.

Attention

If regular maintenance is not performed, your Epson projector will notify you

when the temperature inside the projector has reached a high level. Do not wait

until this warning appears to maintain your projector filter as prolonged exposure

to high temperatures may reduce the life of your projector or lamp.

gg Related Links

• "Cleaning the Air Filter and Vents" p.160

• "Replacing the Air Filter" p.160

• "List of Functions" p.10

Cleaning the Air Filter and Vents

Clean the projector's air filter or vents if they get dusty, or if you see a

message telling you to clean them.

aTurn off the projector and unplug the power cord.

bGently remove the dust using a small vacuum designed for computers

or a very soft brush (such as a paintbrush).

aYou can remove the air filter so that you can clean both sides. Do

not rinse the air filter in water, or use any detergent or solvent to

clean it.

Attention

Do not use canned air. The gases may leave a flammable residue or push

dust and debris into the projector's optics or other sensitive areas.

cIf dust is difficult to remove or the air filter is damaged, replace the air

filter.

Replacing the Air Filter

You need to replace the air filter in the following situations:

• After cleaning the air filter, you see a message telling you to clean or replace

it.

• The air filter is torn or damaged.

You can replace the air filter while the projector is mounted to the ceiling or

placed on a table.

Air Filter and Vent Maintenance 161

aTurn off the projector and unplug the power cord.

bOpen the air filter cover.

cPull the air filter out of the projector.

aDispose of used air filters according to local regulations.

• Filter frame: ABS

• Filter: Polyurethane foam

Air Filter and Vent Maintenance 162

dPlace the new air filter in the projector as shown and push gently until

it clicks into place.

eClose the air filter cover.

gg Related Links

• "Replacement Parts" p.185

Projector Lamp Maintenance 163

The projector monitors the number of hours the lamp is used and displays

this information in the projector's menu system.

Replace the lamp as soon as possible when the following occurs:

• The projected image gets darker or quality declines

• A message is displayed when you turn on the projector telling you to replace

the lamp (the message is displayed 100 hours before the expected end of the

lamp life and appears for 30 seconds)

• The projector's power indicator is flashing blue and its lamp indicator is

flashing orange.

Attention

• If you continue to use the lamp after the replacement period has passed, the

possibility that the lamp may explode increases. When the lamp replacement

message appears, replace the lamp with a new one as soon as possible, even if it

is still working.

• Do not repeatedly turn off the power and then immediately turn it back on.

Turning the power on and off frequently may shorten the lamp's operating life.

• Depending on the characteristics of the lamp and the way it has been used, the

lamp may become darker or stop working before the lamp warning message

appears. You should always have a spare lamp unit ready in case it is needed.

• We recommend the use of genuine Epson replacement lamps. The use of non-

genuine lamps may affect projection quality and safety. Any damage or

malfunction caused by the use of non-genuine lamps may not be covered by

Epson's warranty.

gg Related Links

• "Replacing the Lamp" p.163

• "Resetting the Lamp Timer" p.166

• "Projector Specifications" p.194

• "Projector Indicator Status" p.169

Replacing the Lamp

You can replace the lamp while the projector is placed on a table or mounted

to the ceiling.

Warning

• Let the lamp fully cool before replacing it to avoid injury.

• Never disassemble or modify the lamp. If a modified or disassembled lamp is

installed in the projector, it could cause a fire, electric shock, or other damage or

injury.

aTurn off the projector and unplug the power cord.

bAllow the projector lamp to cool down for at least one hour.

cUse the screwdriver included with the replacement lamp to loosen the

screw securing the lamp cover.

Projector Lamp Maintenance 164

Warning

When replacing the lamp, there is a possibility that the lamp may be

broken. If replacing the lamp of a projector which has been installed on the

ceiling, you should always assume that the lamp is cracked, and you should

stand to the side of the lamp cover, not underneath it. Remove the lamp

cover gently. Be careful when removing the lamp cover as shards of glass

may fall out and could cause an injury. If any shards of glass get into your

eyes or mouth, contact a doctor immediately.

dSlide the lamp cover out and lift it off.

eLoosen the screws securing the lamp to the projector. The screws do

not come all the way out.

fGrip the raised section of the lamp and remove it.

Projector Lamp Maintenance 165

a• If you notice the lamp is cracked when removing the lamp,

contact Epson for help.

• The lamp(s) in this product contain mercury (Hg). Check your

local laws and regulations regarding disposal or recycling. Do

not put in the trash.

gGently insert the new lamp into the projector. If it does not fit easily,

make sure it is facing the right way.

Attention

Do not touch any glass on the lamp assembly to avoid premature lamp

failure.

hPush in the lamp firmly and tighten the screws to secure it.

iReplace the lamp cover and tighten the screw to secure it.

Projector Lamp Maintenance 166

a• Make sure the lamp cover is securely installed or the lamp will

not turn on.

• Do not replace the lamp cover with too much force and make

sure the lamp cover is not deformed.

Reset the lamp timer to zero to monitor the new lamp's usage.

gg Related Links

• "Replacement Parts" p.185

Resetting the Lamp Timer

You must reset the lamp timer after replacing the projector's lamp to clear the

lamp replacement message and to monitor lamp usage correctly.

aDo not reset the lamp timer if you have not replaced the lamp to avoid

inaccurate lamp usage information.

aTurn on the projector.

bPress the [Menu] button, select the Reset menu, and press [Enter].

cSelect Reset Lamp Hours and press [Enter].

You see a prompt asking if you want to reset the lamp hours.

dSelect Yes and press [Enter].

ePress [Menu] or [Esc] to exit the menus.

Solving Problems

Check the solutions in these sections if you have any problems using the projector.

gg Related Links

• "Projection Problems" p.168

• "Projector Indicator Status" p.169

• "Using the Projector Help Displays" p.172

• "Solving Image or Sound Problems" p.173

• "Solving Projector or Remote Control Operation Problems" p.178

• "Solving Network Problems" p.180

Projection Problems 168

If the projector is not working properly, turn it off, unplug it, and then plug it

back in and turn it on.

If this does not solve the problem, check the following:

• The indicators on the projector may indicate the problem.

• The projector's Help system can display information about common

problems.

• The solutions in this manual can help you solve many problems.

If none of these solutions help, contact Epson for technical support.

Projector Indicator Status 169

The indicators on the projector indicate the projector status and let you know

when a problem occurs. Check the status and color of the indicators and then

refer to this table for a solution.

a• If the indicators display a pattern not listed in the table below, turn

the projector off, unplug it, and contact Epson for help.

EB‑‑E20/EB‑‑E10/EB‑‑E01/VS260

APower indicator

BStatus indicator

CWireless LAN indicator

DLamp indicator

ETemp (temperature) indicator

Projector status

Indicator and status Problem and solutions

Power: Lit blue

Status: Lit blue

Lamp: Off

Temp: Off

Normal operation.

Power: Lit blue

Status: Flashing blue

Lamp: Off

Temp: Off

Warming up, shutting down, or cooling down.

When warming up, wait about 30 seconds for an image

to appear.

All buttons are disabled during warm-up, shutting

down, and cooling down.

Power: Lit blue

Status: Off

Lamp: Off

Temp: Off

Standby, sleep mode, or monitoring.

When you press the power button, projection starts.

Power: Flashing blue

Status: Off

Lamp: Off

Temp: Off

Preparing for monitoring and all features are disabled.

Power: Flashing blue

Status: Indicator status

varies

Lamp: Indicator status

varies

Temp: Flashing orange

Projector is too hot.

• Make sure that the vents and air filter are not clogged

with dust or obstructed by nearby objects.

• Clean or replace the air filter.

• Make sure the environmental temperature is not too

hot.

Projector Indicator Status 170

Indicator and status Problem and solutions

Power: Off

Status: Flashing blue

Lamp: Off

Temp: Lit orange

Projector has overheated and turned off. Leave it turned

off to cool down for 5 minutes.

• Make sure that the vents and air filter are not clogged

with dust or obstructed by nearby objects.

• Make sure the environmental temperature is not too

hot.

• Clean or replace the air filter.

• If operating the projector at high altitude, set the High

Altitude Mode setting to On in the projector's menu.

sExtended >Operation >High Altitude Mode

• If the problem persists, unplug the projector and

contact Epson for help.

Power: Off

Status: Flashing blue

Lamp: Lit orange

Temp: Off

Lamp has a problem.

• Check to see if the lamp is burned out, broken, or

installed incorrectly. Reseat or replace the lamp as

necessary.

• Clean the air filter.

• If operating the projector at high altitude, set the High

Altitude Mode setting to On in the projector's menu.

sExtended >Operation >High Altitude Mode

• If the problem persists, unplug the projector and

contact Epson for help.

Lamp cover has a problem.

• Check that the lamp and the lamp cover are securely

installed. The lamp does not turn on if the lamp and

the lamp cover are not installed correctly.

Power: Flashing blue

Status: Indicator status

varies

Lamp: Flashing orange

Temp: Indicator status

varies

Replace the lamp soon to avoid damage. Do not

continue using the projector.

Indicator and status Problem and solutions

Power: Off

Status: Flashing blue

Lamp: Off

Temp: Flashing orange

A fan or sensor has a problem.

Turn the projector off, unplug it, and contact Epson for

help.

Power: Off

Status: Flashing blue

Lamp: Flashing orange

Temp: Off

Internal projector error.

Turn the projector off, unplug it, and contact Epson for

help.

Power: Off

Status: Flashing blue

Lamp: Flashing orange

Temp: Flashing orange

Auto iris error. Turn the projector off, unplug it, and

contact Epson for help.

Power: Off

Status: Flashing blue

Lamp: Lit orange

Temp: Lit orange

Power error (Ballast). Turn the projector off, unplug it,

and contact Epson for help.

Wireless LAN status

Wireless LAN indicator

status

Problem and solutions

Lit blue Wireless LAN is available.

Flashing blue (quickly) Connecting to a device.

Flashing blue (slowly) An error has occurred. Turn off the projector and restart

it.

Off Wireless LAN is not available. Make sure the wireless

LAN settings are correct.

gg Related Links

• "List of Functions" p.10

• "Cleaning the Air Filter and Vents" p.160

• "Replacing the Air Filter" p.160

Projector Indicator Status 171

• "Replacing the Lamp" p.163

Using the Projector Help Displays 172

You can display information to help you solve common problems using the

projector's Help system.

aTurn on the projector.

bPress the [Home] button on the control panel or remote control.

cSelect Help on the Home screen.

The Help menu is displayed.

dUse the up and down arrow buttons to highlight the problem you want

to solve.

ePress [Enter] to view the solutions.

fPerform one of the following actions when you are finished.

• To select another problem to solve, press [Esc].

• To exit the help system, press [Menu].

Solving Image or Sound Problems 173

Check the solutions in these sections if you have any problems with projected

images or sound.

gg Related Links

• "Solutions When No Image Appears" p.173

• "Solutions When Image is Incorrect Using the USB Display Function" p.173

• "Solutions When "No Signal" Message Appears" p.174

• "Solutions When "Not Supported" Message Appears" p.174

• "Solutions When Only a Partial Image Appears" p.175

• "Solutions When the Image is not Rectangular" p.175

• "Solutions When the Image Contains Noise or Static" p.175

• "Solutions When the Image is Fuzzy or Blurry" p.176

• "Solutions When the Image Brightness or Colors are Incorrect" p.176

• "Solutions to Sound Problems" p.177

• "Solutions When Image File Names are not Displayed Correctly in PC Free"

p.177

Solutions When No Image Appears

If no image appears, try the following solutions:

• Make sure the lens cover is open all the way.

• Press the [A/V Mute] button on the remote control to see if the image was

temporarily turned off.

• Make sure all necessary cables are securely connected and the power is on

for the projector and connected video sources.

• Press the projector's power button to wake it from standby or sleep mode.

Also, check if the connected computer is in sleep mode or displaying a

blank screen saver.

• If the projector does not respond when you press the control panel buttons,

the buttons may be locked for security. Unlock the buttons in the Control

Panel Lock setting or use the remote control to turn on the projector.

sSettings >Lock Setting >Control Panel Lock

• Adjust the Brightness setting in the projector's Image menu.

• Select High or Medium as the Power Consumption setting.

sECO >Power Consumption

• Check the Display setting in the projector's Extended menu to make sure

Messages is set to On.

• The projector may not be able to project copyrighted videos that you play

back on a computer. For more details, see the manual supplied with the

computer.

• For images projected with Windows Media Center, reduce the screen size

from full screen mode.

• For images projected from applications using Windows DirectX, turn off

DirectX functions.

gg Related Links

• "Input Signal Settings - Signal Menu" p.131

• "Image Quality Settings - Image Menu" p.130

• "Projector Setup Settings - ECO Menu" p.147

• "Projector Setup Settings - Extended Menu" p.134

• "Unlocking the Projector's Buttons" p.85

Solutions When Image is Incorrect Using the USB

Display Function

If no image appears or if the image appears incorrectly using the USB Display

function, try the following solutions:

• Press the [USB] button on the remote control.

• Disconnect the USB cable, and reconnect it.

• Make sure the Epson USB Display software has been installed correctly.

Depending on your OS or computer settings, the software may not have

been installed automatically. Download the latest software from the

following Web site and install it.

epson.com/support/

• For Mac, select the USB Display icon in the Dock folder. If the icon does

not appear on the Dock, double-click USB Display in the Applications

folder.

Solving Image or Sound Problems 174

If you select Exit from the USB Display icon menu on the Dock, USB

Display does not start automatically when you connect the USB cable.

• If the mouse cursor flickers, select Make the movement of the mouse

pointer smooth in the Epson USB Display Settings program on your

computer.

• Turn off the Transfer layered window setting in the Epson USB Display

Settings program on your computer.

• For images projected with Windows Media Center, reduce the screen size

from full screen mode.

• For images projected from applications using Windows DirectX, turn off

DirectX functions.

gg Related Links

• "Connecting to a Computer for USB Video and Audio" p.28

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:

• Press the [Source Search] button and wait a few seconds for an image to

appear.

• Turn on the connected computer or video source, and press play to begin

your presentation, if necessary.

• Check that all cables required for projection are securely connected.

• If you are projecting from a laptop computer, make sure it is set up to

display on an external monitor.

• If necessary, turn off the projector and the connected computer or video

source, and then turn them back on.

• If you are projecting from an HDMI source, replace the HDMI cable with

the shorter one.

gg Related Links

• "Displaying From a Laptop" p.174

• "Displaying From a Mac Laptop" p.174

Displaying From a Laptop

If the message "No Signal" is displayed when projecting from a laptop, you

need to set up the laptop to display on an external monitor.

aHold down the laptop's Fn key and press the key labeled with a monitor

icon or CRT/LCD. Wait a few seconds for an image to appear.

bTo display on the laptop's monitor and the projector, try pressing the

same keys again.

cIf the same image is not displayed by the laptop and projector, check

the Windows Display utility to make sure the external monitor port is

enabled and extended desktop mode is disabled.

dIf necessary, check your video card settings and set the multiple display

option to Clone or Mirror.

Displaying From a Mac Laptop

If the message "No Signal" is displayed when projecting from a Mac laptop,

you need to set up the laptop for mirrored display. (See your laptop manual

for details.)

aOpen the System Preferences utility and select Displays.

bSelect the Display or Color LCD option, if necessary.

cClick the Arrange or Arrangement tab.

dSelect Mirror Displays.

Solutions When "Not Supported" Message Appears

If the message "Not supported" is displayed, try the following solutions:

Solving Image or Sound Problems 175

• Make sure the correct input signal is selected in the projector's Signal menu.

• Make sure the computer's display resolution does not exceed the projector's

resolution and frequency limits. If necessary, select a different display

resolution for your computer.

gg Related Links

• "Input Signal Settings - Signal Menu" p.131

• "Supported Monitor Display Resolutions" p.192

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:

• If you are projecting from a computer using a VGA computer cable, press

the [Auto] button on the remote control to optimize the image signal.

• Try adjusting the image position using the Position setting in the

projector's Signal menu.

• Press the [Aspect] button on the remote control to select a different image

aspect ratio.

• Change the Resolution setting in the projector's Signal menu according to

the signal for the connected equipment.

• If you zoomed into or out of the image using the [E-Zoom] buttons, press

the [Default] button to return to the original image size.

• Check your computer display settings to disable dual display and set the

resolution within the projector's limits.

• Check the resolution assigned to your presentation files to see if they are

created for a different resolution.

• Make sure you selected the correct projection mode. You can select this

using the Projection setting in the projector's Extended menu.

gg Related Links

• "Input Signal Settings - Signal Menu" p.131

• "Projector Setup Settings - Extended Menu" p.134

• "Supported Monitor Display Resolutions" p.192

Solutions When the Image is not Rectangular

If the projected image is not evenly rectangular, try the following solutions:

• Place the projector directly in front of the center of the screen, facing it

squarely, if possible.

• Set Auto V-Keystone to On in the projector's Settings menu. The projector

automatically corrects the image every time you move the projector.

sSettings >Keystone >H/V-Keystone >Auto V-Keystone

• Set H-Keystone Adjuster to On in the projector's Settings menu. Then

adjust the horizontal keystone slider until the image is evenly rectangular.

sSettings >Keystone >H/V-Keystone >H-Keystone Adjuster

• Press the keystone buttons on the projector to adjust the image shape.

• Adjust the Quick Corner setting to correct the image shape.

sSettings >Keystone >Quick Corner

gg Related Links

• "Auto V-Keystone" p.50

• "Correcting the Image Shape with the Keystone Buttons" p.51

• "Correcting the Image Shape with Quick Corner" p.52

• "Correcting the Image Shape with the Horizontal Keystone Slider" p.50

Solutions When the Image Contains Noise or Static

If the projected image contains electronic interference (noise) or static, try the

following solutions:

• Check the cables connecting your computer or video source to the

projector. They should be:

• Separated from the power cord to prevent interference

• Securely connected at both ends

• Not connected to an extension cable

• Check the settings in the projector's Signal menu to make sure they match

the video source.

Solving Image or Sound Problems 176

• If available for your video source, adjust the Deinterlacing and Noise

Reduction settings in the projector's Image menu.

sImage >Image Enhancement >Noise Reduction

sImage >Image Enhancement >Deinterlacing

• Select Auto as the Resolution setting in the projector's Signal menu.

• Select a computer video resolution and refresh rate that are compatible with

the projector.

• If you are projecting from a computer using a VGA computer cable, press

the [Auto] button on the remote control to automatically adjust the

Tracking and Sync. settings. If the images are not adjusted correctly,

manually adjust the Tracking and Sync. settings in the projector's Signal

menu.

• If you adjusted the image shape using the projector controls, try decreasing

the Sharpness setting in the projector's Image menu to improve image

quality.

• If you connected an extension power cable, try projecting without it to see if

it caused interference in the signal.

• If you are using the USB Display function, turn off the Transfer layered

window setting in the Epson USB Display Settings program on your

computer.

gg Related Links

• "Input Signal Settings - Signal Menu" p.131

• "Image Quality Settings - Image Menu" p.130

• "Supported Monitor Display Resolutions" p.192

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:

• Adjust the image focus.

• Position the projector close enough to the screen.

• Position the projector so the keystone adjustment angle is not so wide that it

distorts the image.

• Clean the projector lens.

aTo avoid condensation on the lens after bringing the projector in

from a cold environment, let the projector warm up to room

temperature before using it.

• Adjust the Sharpness setting in the projector's Image menu to improve

image quality.

• If you are projecting from a computer using a VGA computer cable, press

the [Auto] button on the remote control to automatically adjust the tracking

and sync. If any bands or overall blurriness remain, display a uniformly

patterned image on the screen and manually adjust the Tracking and Sync.

settings in the projector's Signal menu.

• If you are projecting from a computer, use a lower resolution or select a

resolution that matches the projector's native resolution.

gg Related Links

• "Auto V-Keystone" p.50

• "Input Signal Settings - Signal Menu" p.131

• "Image Quality Settings - Image Menu" p.130

• "Supported Monitor Display Resolutions" p.192

• "Focusing the Image Using the Focus Ring" p.55

• "Cleaning the Lens" p.158

Solutions When the Image Brightness or Colors are

Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the

following solutions:

• Press the [Color Mode] button on the remote control to try different color

modes for the image and environment.

• Check your video source settings.

• Adjust the available settings in the projector's Image menu for the current

input source, such as Brightness,Contrast,Tint, and Color Saturation.

• Make sure you selected the correct Video Signal or Video Range setting in

the projector's Signal menu, if available for your image source.

Solving Image or Sound Problems 177

sSignal >Advanced >Video Signal

sSignal >Advanced >Video Range

• Make sure all the cables are securely connected to the projector and your

video device. If you connected long cables, try connecting shorter cables.

• If you are using ECO as Power Consumption, try selecting High or

Medium.

sECO >Power Consumption

aAt high altitudes or locations subject to high temperatures, the image

may become darker and you may not be able to adjust the Power

Consumption setting.

• Position the projector close enough to the screen.

• If the image has been progressively darkening, you may need to replace the

projector lamp soon.

gg Related Links

• "Adjusting Image Quality (Color Mode)" p.61

• "Input Signal Settings - Signal Menu" p.131

• "Image Quality Settings - Image Menu" p.130

• "Projector Setup Settings - ECO Menu" p.147

Solutions to Sound Problems

If there is no sound or the volume is too low or high, try the following

solutions:

• Adjust the projector's volume settings.

• Press the [A/V Mute] button on the remote control to resume video and

audio if they were temporarily stopped.

• Check your computer or video source to make sure the volume is turned up

and the audio output is set for the correct source.

• Check the audio cable connections between the projector and your video

source.

• Make sure any connected audio cables are labeled "No Resistance".

• If you are using the USB Display function, turn on the Output audio from

the projector setting in the Epson USB Display Settings program on your

computer.

• Select the correct audio input in the A/V Settings setting in the projector's

Extended menu.

• If you want to use a connected audio source when the projector is off, set

the Standby Mode option to Communication On and make sure the A/V

Settings options are set correctly in the projector's Extended menu.

sECO >Standby Mode >Standby Mode

• Check the Mic Input Level setting in the projector's Settings menu. If the

setting is too high, the sound of other connected devices will be too low.

• If you do not hear sound from an HDMI source, set the connected device to

PCM output.

• When you are connecting the projector to a Mac using an HDMI cable,

make sure your Mac supports audio through the HDMI port. If not, you

need to connect an audio cable.

• If the volume for the computer is set to the minimum while the projector is

set to the maximum, the noise may be mixed. Turn up the computer's

volume and turn down the projector's volume. (When you use Epson

iProjection (Windows/Mac) or USB Display.)

gg Related Links

• "Projector Connections" p.27

• "Projector Feature Settings - Settings Menu" p.132

• "Projector Setup Settings - Extended Menu" p.134

• "Projector Setup Settings - ECO Menu" p.147

• "Controlling the Volume with the Volume Buttons" p.63

Solutions When Image File Names are not Displayed

Correctly in PC Free

If any file names are longer than the display area or include unsupported

symbols, the file names are shortened or changed in PC Free. Shorten or

change the file name.

Solving Projector or Remote Control Operation Problems 178

Check the solutions in these sections if you have problems operating the

projector or remote control.

gg Related Links

• "Solutions to Projector Power or Shut-Off Problems" p.178

• "Solutions to Problems with the Remote Control" p.178

• "Solutions to Password Problems" p.179

• "Solution When "The Battery that Saves Your Clock Settings is Running

Low" Message Appears" p.179

Solutions to Projector Power or Shut-Off Problems

If the projector does not turn on when you press the power button or it turns

off unexpectedly, try the following solutions:

• Make sure the power cord is securely connected to the projector and to a

working electrical outlet.

• If the power button on the remote control does not turn on the projector,

check its batteries and make sure at least one of the remote receivers are

available in the Remote Receiver setting in the projector's Settings menu.

• The projector's buttons may be locked for security. Unlock the buttons in

the Control Panel Lock setting or use the remote control to turn on the

projector.

sSettings >Lock Setting >Control Panel Lock

• If the projector's lamp turns off unexpectedly, it may have entered sleep

mode after a period of inactivity. Perform any operation to wake the

projector. To turn off sleep mode, select Off as the Sleep Mode setting in

the projector's ECO menu.

• If the projector's lamp turns off unexpectedly, the A/V mute timer may be

enabled. To turn off the A/V mute timer, select Off as the A/V Mute Timer

setting in the projector's ECO menu.

• If the projector's lamp turns off unexpectedly, the lens cover timer may be

enabled. To turn off the lens cover timer, select Off as the Lens Cover

Timer setting in the projector's ECO menu.

• If the projector's lamp turns off, the status indicator is flashing, and the

temp (temperature) indicator is lit, the projector has overheated and turned

off.

• The cooling fans may run in standby status depending on the projector

settings. Also, when the projector wakes from standby status, the fans may

cause an unexpected noise. This is not a malfunction.

• The power cord may be defective. Disconnect the cord and contact Epson

for help.

gg Related Links

• "Projector Setup Settings - ECO Menu" p.147

• "Projector Indicator Status" p.169

• "Projector Feature Settings - Settings Menu" p.132

• "Unlocking the Projector's Buttons" p.85

Solutions to Problems with the Remote Control

If the projector does not respond to remote control commands, try the

following solutions:

• Check that the remote control batteries are installed correctly and have

power. If necessary, replace the batteries.

• Make sure you are operating the remote control within the reception angle

and range of the projector.

• Make sure the projector is not warming up or shutting down.

• Check to see if a button on the remote control is stuck down, causing it to

enter sleep mode. Release the button to wake the remote control up.

• Strong fluorescent lighting, direct sunlight, or infrared device signals may be

interfering with the projector's remote receivers. Dim the lights or move the

projector away from the sun or interfering equipment.

• Make sure at least one of the remote receivers are available in the Remote

Receiver setting in the projector's Settings menu.

• If the Remote Receiver setting is disabled, hold down the [Menu] button on

the remote control for at least 15 seconds to reset the setting to its default.

Solving Projector or Remote Control Operation Problems 179

• If you assigned an ID number to the projector to operate multiple projectors

from the remote control, you may need to check or change the ID setting.

• Press the 0 (zero) button on the remote control while holding down the

[ID] button. By selecting 0 on the remote control, you can operate all of the

projectors regardless of the projector ID settings.

• If you lose the remote control, you can order another one from Epson.

gg Related Links

• "Remote Control Operation" p.36

• "Projector Feature Settings - Settings Menu" p.132

• "Selecting the Projector You want to Operate" p.79

• "Installing Batteries in the Remote Control" p.35

Solutions to Password Problems

If you cannot enter or remember a password, try the following solutions:

• You may have turned on password protection without first setting a

password. Try entering 0000 using the remote control.

• If you have entered an incorrect password too many times and see a

message displaying a request code, write down the code and contact Epson

for help. Provide the request code and proof of ownership for assistance in

unlocking the projector.

• If you set a Epson Web Control password and forgot the user ID or

password, try entering the following:

• User ID: EPSONWEB

• Default password: admin

• If you set a Remote password (in Epson Web Control) and forgot the user

ID or password, try entering the following:

• User ID: EPSONREMOTE

• Default password: guest

• If you lose the remote control you cannot enter a password. Order a new

one from Epson.

Solution When "The Battery that Saves Your Clock

Settings is Running Low" Message Appears

If the message "The battery that saves your clock settings is running low." is

displayed, contact Epson for help.

Solving Network Problems 180

Check the solutions in these sections if you have problems using the projector

on a network.

gg Related Links

• "Solutions When Wireless Authentication Fails" p.180

• "Solutions When You Cannot Access the Projector Through the Web" p.180

• "Solutions When Network Alert E-Mails are not Received" p.180

• "Solutions When the Image Contains Static During Network Projection"

p.181

• "Solutions When You Cannot Connect Using Screen Mirroring" p.181

• "Solutions When the Image or Sound Contains Static During Screen

Mirroring Connection" p.181

Solutions When Wireless Authentication Fails

If you are having trouble with the authentication, try the following solutions:

• If the wireless settings are correct, but authentication fails, you may need to

update the Date & Time settings.

sExtended >Operation >Date & Time

• Check the Security settings in the projector's Network menu.

sNetwork >Network Configuration >Wireless LAN

• If the access point security is WPA3-EAP, change the access point setting to

WPA2/WPA3-EAP.

gg Related Links

• "Projector Setup Settings - Extended Menu" p.134

• "Network Menu - Wireless LAN Menu" p.140

Solutions When You Cannot Access the Projector

Through the Web

If you are unable to access the projector through a Web browser, make sure

you are using the correct ID and password.

• For the user ID, enter EPSONWEB. (You cannot change the user ID.)

• For the password, enter the password set in the projector's Network menu.

The default password is admin.

• Make sure you have access to the network the projector is on.

• If your Web browser is set up to connect via a proxy server, the Epson Web

Control screen cannot be displayed. Make settings for a connection without

using a proxy server.

• If you set Standby Mode to Communication On in the projector's menu in

standby mode, make sure the network device is turned on. After turning on

the network device, turn on the projector.

sECO >Standby Mode >Standby Mode

aThe user ID and password are case sensitive.

gg Related Links

• "Network Menu - Basic Menu" p.139

Solutions When Network Alert E-Mails are not

Received

If you do not receive an e-mail alerting you to problems with a projector over

the network, try the following solutions:

• Make sure the projector is turned on and connected to the network

correctly. (If an error shuts down the projector, the email may not be

delivered.)

• Make sure you set up the projector e-mail alert settings correctly in the

projector's network Notifications menu or in the network software.

• Set the Standby Mode setting to Communication On so that the network

software can monitor the projector in standby mode.

sECO >Standby Mode >Standby Mode

• Change the Port setting according to your network environment.

sECO >Standby Mode >Port

Solving Network Problems 181

gg Related Links

• "Network Menu - Notifications Menu" p.144

• "Projector Setup Settings - ECO Menu" p.147

Solutions When the Image Contains Static During

Network Projection

If the projected image contains static during network projection, try the

following solutions:

• Check for any obstacles between the access point, the computer, the mobile

device, and the projector, and change their positions to improve

communication.

• Make sure that the access point, the computer, the mobile device and the

projector are not too far apart. Move them closer together and try to

connect again.

• Check for interference from other equipment, such as a Bluetooth device or

microwave. Move the interfering device farther away or expand your

wireless bandwidth.

• Reduce the number of connected devices if the connection speed declines.

Solutions When You Cannot Connect Using Screen

Mirroring

If you are unable to connect to the projector using Screen Mirroring, try the

following solutions:

• Check the projector's settings.

• Select On as the Screen Mirroring setting in the projector's Network

menu.

• Change the Display Name so that it does not include "-" in the projector's

Screen Mirroring Settings setting menu or it may not be displayed

correctly on your mobile device.

sNetwork >Screen Mirroring Settings >Display Name

• Select Off as the Screen Mirroring setting in the projector's Network

menu, and select On again.

• Change the Operation Mode setting and connect again.

sNetwork >Screen Mirroring Settings >Operation Mode

• Make sure that the no other devices are connected to the projector with

No Interruptions settings.

sNetwork >Screen Mirroring Settings >Extended >Meeting Mode

• Change the Channel setting according to the wireless LAN environment.

sNetwork >Screen Mirroring Settings >Extended >Channel

• Check the mobile device's settings.

• Make sure the settings on the mobile device are correct.

• When connecting again immediately after disconnecting, it may take

some time until the connection is established. Reconnect after waiting for

a while.

• Restart the mobile device.

• Once you have connected using Screen Mirroring, the projector

connection information may be recorded on the mobile device. However,

you may not be able to reconnect to the projector from the recorded

information. Select the projector from the list of available devices.

gg Related Links

• "Projector Network Settings - Network Menu" p.137

• "Network Menu - Screen Mirroring Settings" p.138

Solutions When the Image or Sound Contains Static

During Screen Mirroring Connection

If the projected image or sound contains static when connecting using Screen

Mirroring, try the following solutions:

• Avoid covering the Wi-Fi antenna of the mobile device.

• If you use a Screen Mirroring connection and an internet connection at the

same time, the image may stop or contain noise. Disconnect the internet

connection to expand your wireless bandwidth and improve the connection

speed of the mobile device.

Solving Network Problems 182

• Make sure the projection contents meet the Screen Mirroring requirements.

• Depending on the settings of the mobile device, the connection may be lost

when the device enters power saving mode. Check the electrical power

saving settings on the mobile device.

• Update to the latest version of the wireless driver or firmware on the mobile

device.

gg Related Links

• "Wireless Network Projection from a Mobile Device (Screen Mirroring)"

p.99

Appendix

Check these sections for the technical specifications and important notices about your projector.

gg Related Links

• "Optional Accessories and Replacement Parts" p.184

• "Screen Size and Projection Distance" p.186

• "Supported Monitor Display Resolutions" p.192

• "Projector Specifications" p.194

• "External Dimensions" p.199

• "USB Display System Requirements" p.203

• "List of Safety Symbols and Instructions" p.204

• "Glossary" p.206

• "Notices" p.208

Optional Accessories and Replacement Parts 184

The following optional accessories and replacement parts are available. Please

purchase these products as and when needed.

The following list of optional accessories and replacement parts is current as

of: January 2020.

Details of accessories are subject to change without notice and availability

may vary depending on the country of purchase.

gg Related Links

• "Screens" p.184

• "Cables" p.184

• "Mounts" p.184

• "For Wireless Connection" p.184

• "External Devices" p.185

• "Replacement Parts" p.185

Screens

80" portable screen ELPSC24

Portable roll-type screens. (aspect ratio 16:10)

50" portable screen ELPSC32

A compact screen that can be carried easily. (aspect ratio 4:3)

80" Mobile X-Type Screen ELPSC21

Portable X-type screens. (aspect ratio 16:9)

Multi Aspect Screen ELPSC26

Portable multi-aspect screen.

Cables

Computer cable ELPKC02 (1.8 m - for mini D-sub 15-pin/mini D-Sub

15pin)

Computer cable ELPKC09 (3 m - for mini D-sub 15-pin/mini D-Sub

15pin)

Computer cable ELPKC10 (20 m - for mini D-sub 15-pin/mini D-Sub

15pin)

Use when connecting to the Computer port.

Mounts

Ceiling mount ELPMB23

Use when installing the projector on a ceiling.

Safety Wire Set ELPWR01

Use when connecting the projector to the installation mount to prevent the

projector from falling down.

Ceiling pipe (450 mm) ELPFP13

Ceiling pipe (700 mm) ELPFP14

Use when installing the projector on a high ceiling.

aSpecial expertise is required to suspend the projector from a ceiling.

Contact Epson for help.

For Wireless Connection

Wireless LAN module ELPAP11

Use this to project images from a computer via a wireless communication.

(Frequency band: 2.4 GHz/5 GHz)

Optional Accessories and Replacement Parts 185

External Devices

Document Camera ELPDC21/ELPDC13/ELPDC07

Use when projecting image such as books, OHP documents, or slides.

Soft carrying case ELPKS69

(VS260/EB‑‑W52/EB‑‑W51/EB‑‑X51/EB‑‑E10/EB‑‑FH06/EB‑‑W06/EB‑‑X06/

EB‑‑E01/EB‑‑X500)

Use this to carry the projector by hand.

Soft carrying case ELPKS70

(EB‑‑992F/EB‑‑982W/EB‑‑972/EB‑‑118/EB‑‑W49/EB‑‑X49/EB‑‑E20/EB‑‑FH52)

Use this to carry the projector by hand.

Replacement Parts

Lamp unit ELPLP97

Use as a replacement for used lamps.

Air filter ELPAF54 (EB‑‑992F/EB‑‑982W/EB‑‑972/EB‑‑FH52)

Use as a replacement for used air filters.

Air filter ELPAF32

(VS260/EB‑‑118/EB‑‑W49/EB‑‑X49/EB‑‑E20/EB‑‑W52/EB‑‑W51/EB‑‑X51/EB‑‑

E10/EB‑‑F H06/EB‑‑W06/EB‑‑X06/EB‑‑E01/EB‑‑X500)

Use as a replacement for used air filters.

Screen Size and Projection Distance 186

Check the table here to determine how far to place the projector from the

screen based on the size of the projected image.

AProjection distance (cm)

BDistance from the center of the lens to the base of the screen (or to the top of

the screen, if suspended from a ceiling) (cm)

CCenter of lens

EB‑‑E20/EB‑‑E10/EB‑‑E01/VS260

4:3 screen size A B

Minimum (Wide) to

Maximum (Tele)

30" 61 × 46 87 - 118 -5

50" 102 × 76 146 - 198 -8

4:3 screen size A B

Minimum (Wide) to

Maximum (Tele)

60" 122 × 91 176 - 238 -10

70" 142 × 107 205 - 278 -12

80" 163 × 122 235 - 318 -14

100" 203 × 152 294 - 398 -17

150" 305 × 229 442 - 598 -25

200" 406 × 305 590 - 797 -34

300" 610 × 457 886 -51

350" 711 × 533 1034 -59

16:9 screen size A B

Minimum (Wide) to

Maximum (Tele)

28" 62 × 35 88 - 120 1

30" 66 × 37 95 - 129 1

50" 111 × 62 159 - 216 1

60" 133 × 75 192 - 259 1

70" 155 × 87 224 - 303 2

80" 177 × 100 256 - 346 2

100" 221 × 125 321 - 433 2

150" 332 × 187 482 - 651 3

200" 443 × 249 643 - 869 5

300" 664 × 374 966 7

320" 708 × 398 1030 7

Note: You can also use the online Projection Distance Calculator to determine

projector placement.

Screen Size and Projection Distance 187

16:10 screen size A B

Minimum (Wide) to

Maximum (Tele)

29" 62 × 39 89 - 121 -1

30" 65 × 40 92 - 125 -1

50" 108 × 67 155 - 210 -2

60" 129 × 81 186 - 252 -3

70" 151 × 94 218 - 295 -3

80" 172 × 108 249 - 337 -4

100" 215 × 135 312 - 422 -4

150" 323 × 202 469 - 633 -7

200" 431 × 269 626 - 845 -9

300" 646 × 404 939 -13

330" 711 × 444 1034 -15

EB‑‑118/EB‑‑X49/EB‑‑X51/EB‑‑X06/EB‑‑X500

4:3 screen size A B

Minimum (Wide) to

Maximum (Tele)

30" 61 × 46 89 - 107 -5

40" 81 × 61 119 - 143 -7

50" 102 × 76 150 - 180 -8

60" 122 × 91 180 - 217 -10

80" 163 × 122 241 - 290 -14

100" 203 × 152 302 - 363 -17

150" 305 × 229 454 - 546 -25

200" 406 × 305 607 - 729 -34

250" 508 × 381 759 - 912 -42

300" 610 × 457 912 - 1095 -51

16:9 screen size A B

Minimum (Wide) to

Maximum (Tele)

28" 62 × 35 90 - 109 1

30" 66 × 37 97 - 117 1

40" 89 × 50 130 - 156 1

50" 111 × 62 163 - 196 1

60" 133 × 75 196 - 236 1

80" 177 × 100 263 - 316 2

100" 221 × 125 329 - 396 2

150" 332 × 187 495 - 595 3

200" 443 × 249 661 - 794 5

250" 553 × 311 827 - 994 6

275" 609 × 342 910 - 1093 6

16:10 screen size A B

Minimum (Wide) to

Maximum (Tele)

29" 62 × 39 91 - 110 -1

30" 65 × 40 94 - 113 -1

40" 86 × 54 126 - 152 -2

50" 108 × 67 159 - 191 -2

60" 129 × 81 191 - 230 -3

80" 172 × 108 256 - 307 -4

100" 215 × 135 320 - 385 -4

150" 323 × 202 482 - 579 -7

200" 431 × 269 643 - 773 -9

250" 538 × 337 805 - 967 -11

280" 603 × 377 902 - 1083 -13

Screen Size and Projection Distance 188

EB‑‑W49/EB‑‑W52/EB‑‑W51/EB‑‑W06

16:10 screen size A B

Minimum (Wide) to

Maximum (Tele)

33" 71 × 44 91 - 110 -4

35" 75 × 47 97 - 117 -4

40" 86 × 54 111 - 134 -5

50" 108 × 67 139 - 168 -6

60" 129 × 81 168 - 202 -7

80" 172 × 108 225 - 270 -10

100" 215 × 135 281 - 338 -12

150" 323 × 202 424 - 509 -18

200" 431 × 269 566 - 680 -24

320" 689 × 431 907 - 1089 -39

4:3 screen size A B

Minimum (Wide) to

Maximum (Tele)

29" 59 × 44 90 - 109 -4

30" 61 × 46 94 - 113 -4

40" 81 × 61 126 - 152 -5

50" 102 × 76 158 - 190 -7

60" 122 × 91 190 - 229 -8

70" 142 × 107 222 - 267 -10

80" 163 × 122 255 - 306 -11

100" 203 × 152 319 - 383 -14

150" 305 × 229 480 - 577 -20

200" 406 × 305 641 - 770 -27

280" 569 × 427 898 - 1079 -38

16:9 screen size A B

Minimum (Wide) to

Maximum (Tele)

32" 71 × 40 91 - 109 -2

35" 77 × 44 99 - 120 -2

40" 89 × 50 114 - 137 -2

50" 111 × 62 143 - 172 -3

60" 133 × 75 172 - 208 -3

70" 155 × 87 202 - 243 -4

80" 177 × 100 231 - 278 -4

100" 221 × 125 289 - 348 -5

150" 332 × 187 435 - 523 -8

200" 443 × 249 582 - 699 -11

310" 686 × 386 903 - 1084 -17

EB‑‑FH06

16:9 screen size A B

Minimum (Wide) to

Maximum (Tele)

34" 75 × 42 91 - 109 -3

40" 89 × 50 107 - 129 -3

50" 111 × 62 135 - 162 -4

60" 133 × 75 162 - 195 -5

80" 177 × 100 217 - 261 -7

100" 221 × 125 272 - 327 -8

150" 332 × 187 410 - 492 -12

200" 443 × 249 547 - 658 -16

250" 553 × 311 685 - 823 -20

332" 735 × 413 911 - 1094 -27

Screen Size and Projection Distance 189

4:3 screen size A B

Minimum (Wide) to

Maximum (Tele)

28" 57 × 43 91 - 110 -3

30" 61 × 46 98 - 118 -3

40" 81 × 61 132 - 159 -4

50" 102 × 76 165 - 199 -5

60" 122 × 91 199 - 240 -6

80" 163 × 122 266 - 320 -8

100" 203 × 152 334 - 401 -10

150" 305 × 229 502 - 603 -15

200" 406 × 305 671 - 806 -20

250" 508 × 381 839 - 1008 -25

16:10 screen size A B

Minimum (Wide) to

Maximum (Tele)

40" 86 × 54 116 - 140 -4

50" 108 × 67 146 - 176 -4

60" 129 × 81 175 - 211 -5

70" 151 × 94 205 - 247 -6

80" 172 × 108 235 - 283 -7

100" 215 × 135 294 - 354 -9

150" 323 × 202 443 - 533 -13

200" 431 × 269 592 - 711 -18

250" 538 × 337 741 - 890 -22

280" 603 × 377 830 - 997 -25

EB‑‑972

4:3 screen size A B

Minimum (Wide) to

Maximum (Tele)

27" 55 × 41 85 - 140 -2

40" 81 × 61 128 - 208 -3

50" 102 × 76 160 - 261 -4

60" 122 × 91 193 - 314 -4

80" 163 × 122 258 - 420 -6

100" 203 × 152 323 - 525 -7

150" 305 × 229 486 - 789 -11

200" 406 × 305 649 - 1054 -15

250" 508 × 381 812 - 1318 -19

262" 532 × 399 852 - 1381 -20

16:9 screen size A B

Minimum (Wide) to

Maximum (Tele)

25" 55 × 31 86 - 141 3

30" 66 × 37 104 - 170 4

40" 89 × 50 139 - 227 5

50" 111 × 62 175 - 285 6

60" 133 × 75 210 - 342 8

80" 177 × 100 281 - 458 10

100" 221 × 125 352 - 573 13

120" 266 × 149 424 - 688 15

150" 332 × 187 530 - 860 19

200" 443 × 249 708 - 1148 25

241" 534 × 300 853 - 1384 30

Screen Size and Projection Distance 190

16:10 screen size A B

Minimum (Wide) to

Maximum (Tele)

25" 54 × 34 84 - 137 1

30" 65 × 40 101 - 165 2

40" 86 × 54 135 - 221 2

50" 108 × 67 170 - 277 3

60" 129 × 81 205 - 333 3

80" 172 × 108 274 - 445 4

100" 215 × 135 343 - 557 6

120" 258 × 162 412 - 669 7

150" 323 × 202 516 - 837 8

200" 431 × 269 689 - 1117 11

247" 532 × 333 851 - 1380 14

EB‑‑982W

16:10 screen size A B

Minimum (Wide) to

Maximum (Tele)

29" 62 × 39 85 - 140 -1

35" 75 × 47 103 - 169 -1

40" 86 × 54 118 - 193 -1

50" 108 × 67 149 - 243 -2

60" 129 × 81 179 - 292 -2

80" 172 × 108 239 - 390 -3

100" 215 × 135 300 - 488 -3

150" 323 × 202 451 - 733 -5

200" 431 × 269 603 - 979 -7

280" 603 × 377 845 - 1371 -9

4:3 screen size A B

Minimum (Wide) to

Maximum (Tele)

26" 53 × 40 86 - 142 -1

30" 61 × 46 100 - 164 -1

40" 81 × 61 134 - 219 -2

50" 102 × 76 169 - 275 -2

60" 122 × 91 203 - 331 -2

70" 142 × 107 237 - 386 -3

80" 163 × 122 271 - 442 -3

100" 203 × 152 340 - 553 -4

150" 305 × 229 511 - 831 -6

200" 406 × 305 682 - 1108 -8

240" 488 × 366 820 - 1330 -9

16:9 screen size A B

Minimum (Wide) to

Maximum (Tele)

29" 64 × 36 87 - 143 1

35" 77 × 44 106 - 174 1

40" 89 × 50 122 - 199 1

50" 111 × 62 153 - 249 2

60" 133 × 75 184 - 300 2

70" 155 × 87 215 - 350 2

80" 177 × 100 246 - 401 3

100" 221 × 125 308 - 502 3

150" 332 × 187 464 - 754 5

200" 443 × 249 619 - 1006 7

270" 598 × 336 837 - 1359 9

Screen Size and Projection Distance 191

EB‑‑992F/EB‑‑FH52

16:9 screen size A B

Minimum (Wide) to

Maximum (Tele)

30" 66 × 37 87 - 142 0

40" 89 × 50 116 - 190 0

50" 111 × 62 146 - 238 0

60" 133 × 75 176 - 286 0

80" 177 × 100 235 - 382 0

100" 221 × 125 295 - 478 0

150" 332 × 187 443 - 719 0

200" 443 × 249 591 - 959 1

250" 553 × 311 740 - 1200 1

300" 664 × 374 888 - 1441 1

4:3 screen size A B

Minimum (Wide) to

Maximum (Tele)

25" 51 × 38 88 - 145 0

30" 61 × 46 107 - 174 0

40" 81 × 61 143 - 233 0

60" 122 × 91 216 - 351 0

80" 163 × 122 288 - 468 0

100" 203 × 152 361 - 586 0

120" 244 × 183 434 - 704 0

150" 305 × 229 543 - 880 1

200" 406 × 305 724 - 1175 1

220" 447 × 335 797 - 1293 1

245" 498 × 373 888 - 1440 1

16:10 screen size A B

Minimum (Wide) to

Maximum (Tele)

28" 60 × 38 87 - 143 0

30" 65 × 40 94 - 153 0

40" 86 × 54 126 - 205 0

60" 129 × 81 190 - 309 0

80" 172 × 108 254 - 413 0

100" 215 × 135 319 - 517 0

120" 258 × 162 383 - 621 0

150" 323 × 202 479 - 777 1

200" 431 × 269 640 - 1037 1

250" 538 × 337 800 - 1297 1

277" 597 × 373 887 - 1438 1

Supported Monitor Display Resolutions 192

The tables here list the compatible refresh rate and resolution for each

compatible video display format.

Computer Signals (Analog RGB)

Signal Refresh rate (Hz) Resolution (dots)

VGA 60/72/75/85 640 × 480

SVGA 60/72/75/85 800 × 600

XGA 60/70/75/85 1024 × 768

WXGA 60 1280 × 768

60 1366 × 768

60/75/85 1280 × 800

WXGA+ 60/75/85 1440 × 900

WXGA++ 60 1600 × 900

SXGA 70/75/85 1152 × 864

60/75/85 1280 × 960

60/75/85 1280 × 1024

SXGA+ 60/75 1400 × 1050

WSXGA+ * 60 1680 × 1050

UXGA 60 1600 × 1200

1920 × 1080 ** 50/60 1920 × 1080

* Available only for projectors with a resolution of Full HD (1,920 × 1,080) or

WXGA (1,280 × 800), and compatible only when Wide is selected as the

Resolution setting in the projector's Signal menu.

** Available only for projectors with a resolution of Full HD (1,920 × 1,080).

Even when signals other than those mentioned above are input, it is likely that

the image can be projected. However, not all functions may be supported.

Composite Video

Signal Refresh rate (Hz) Resolution (dots)

TV (NTSC) 60 720 × 480

TV (SECAM) 50 720 × 576

TV (PAL) 50/60 720 × 576

HDMI Port Input Signals

Signal Refresh rate (Hz) Resolution (dots)

VGA 60 640 × 480

SVGA 60 800 × 600

XGA 60 1024 × 768

WXGA 60 1280 × 800

60 1366 × 768

WXGA+ 60 1440 × 900

WXGA++ 60 1600 × 900

SXGA 60 1280 × 960

60 1280 × 1024

SXGA+ 60 1400 × 1050

WSXGA+ * 60 1680 × 1050

UXGA 60 1600 × 1200

1920 × 1080 50/60 1920 × 1080

WUXGA (Reduced

Blanking) **

60 1920 × 1200

SDTV (480i/480p) 59.94 720 × 480

SDTV (576i/576p) 50 720 × 576

HDTV (720p) 50/59.94/60 1280 × 720

HDTV (1080i) 50/59.94/60 1920 × 1080

HDTV (1080p) 23.98/24/29.97/30/50/59.94/60 1920 × 1080

Supported Monitor Display Resolutions 193

* Available only for projectors with a resolution of Full HD (1,920 × 1,080) or

WXGA (1,280 × 800).

** Available only for projectors with a resolution of Full HD (1,920 × 1,080).

Projector Specifications 194

EB‑‑972/EB‑‑118/EB‑‑X49/EB‑‑E20/EB‑‑X51/EB‑‑E10/EB‑‑X06/EB‑‑E01/EB‑‑

X500/VS260

Product name EB‑972/EB‑118/EB‑X49/EB‑E20/EB‑X51/EB‑E10/EB‑X06/EB

‑E01/EB‑X500/VS260

Dimensions EB‑‑972

309 (W) × 90 (H) × 282 (D) mm (not including raised

section)

EB‑‑118/EB‑‑X49/EB‑‑E20

302 (W) × 87 (H) × 249 (D) mm (not including raised

section)

EB‑‑X51/EB‑‑E10/EB‑‑X06/EB‑‑E01/EB‑‑X500/VS260

302 (W) × 77 (H) × 234 (D) mm (not including raised

section)

LCD panel size 0.55"

Display method Poly-silicon TFT active matrix

Resolution 786,432 pixels

XGA (1,024 (W) × 768 (H) dots) × 3

Focus adjustment Manual

Zoom adjustment EB‑‑972

1 to 1.6 (Optical Zoom)

EB‑‑118/EB‑‑X49/EB‑‑X51/EB‑‑X06/EB-X500

1 to 1.2 (Optical Zoom)

EB‑‑E20/EB‑‑E10/EB‑‑E01/VS260

1 to 1.35 (Digital Zoom)

Lamp EB‑‑972

UHE lamp, 230 W Model No.: ELPLP97

EB‑‑118/EB‑‑X49/EB‑‑E20/EB‑‑X51/EB‑‑E10/EB‑‑X06/EB‑‑

E01/EB‑‑X500/VS260

UHE lamp, 210 W Model No.: ELPLP97

Lamp life EB‑‑972

High Power Consumption mode: Up to 6,500 hours

Medium Power Consumption mode: Up to 10,000 hours

ECO Power Consumption mode: Up to 17,000 hours

EB‑‑118

High Power Consumption mode: Up to 8,000 hours

Medium Power Consumption mode: Up to 10,000 hours

ECO Power Consumption mode: Up to 17,000 hours

EB‑‑X49/EB‑‑E20/EB‑‑X51/EB‑‑E10/EB‑‑X06/EB‑‑E01/EB‑‑X50

0/VS260

High Power Consumption mode: Up to 6,000 hours

ECO Power Consumption mode: Up to 12,000 hours

Air filter maintenance

cycle

EB‑‑972

10,000 hours

EB‑‑118/EB‑‑X49/EB‑‑E20/EB‑‑X51/EB‑‑E10/EB‑‑X06/EB‑‑

E01/EB‑‑X500/VS260

6,000 hours

Max. audio output EB‑‑972/EB‑‑118

16 W

EB‑‑X49/EB‑‑E20

5 W

EB‑‑X51/EB‑‑E10/EB‑‑X06/EB‑‑E01/EB‑‑X500/VS260

2 W

Speaker 1

Power supply 100-240V AC±10% 50/60Hz 3.5 - 1.6 A

Power consumption

(100 to 120 V area)

Operating: 345 W

Power consumption

(220 to 240 V area)

Operating: 327 W

Standby power

consumption

Communication On: 2.0 W

Communication Off: 0.3 W

Operating altitude Altitude 0 to 3,048 m

Projector Specifications 195

Operating

temperature *

Altitude of 0 to 2,286 m: +5 to +40°C (No condensation)

Altitude of 2,287 to 3,048 m: +5 to +35°C (Humidity of 20

to 80%, No condensation)

Storage temperature -10 to +60°C (Humidity of 10 to 90%, No condensation)

Mass EB‑‑972:

Approx. 3.1 kg

EB‑‑118:

Approx. 2.8 kg

EB‑‑X49/EB‑‑E20:

Approx. 2.7 kg

EB‑‑X51/EB‑‑X06/EB‑‑X500:

Approx. 2.5 kg

EB‑‑E10/EB‑‑E01/VS260:

Approx. 2.4 kg

* Lamp brightness automatically dims if the surrounding temperature gets too

high. (Approximately 35°C at an altitude of 0 to 2,286 m, and approximately

30°C at an altitude of 2,287 to 3,048 m; however, this may vary depending on

the surrounding environment.)

This product is also designed for IT power distribution system with phase-to-

phase voltage 230V.

EB‑‑982W/EB‑‑W49/EB‑‑W52/EB‑‑W51/EB‑‑W06

Product name EB‑982W/EB‑W49/EB‑W52/EB‑W51/EB‑W06

Dimensions EB‑‑982W

309 (W) × 90 (H) × 282 (D) mm (not including raised

section)

EB‑‑W49

302 (W) × 87 (H) × 249 (D) mm (not including raised

section)

EB‑‑W52

302 (W) × 87 (H) × 234 (D) mm (not including raised

section)

EB‑‑W51/EB‑‑W06

302 (W) × 77 (H) × 234 (D) mm (not including raised

section)

LCD panel size 0.59"

Display method Poly-silicon TFT active matrix

Resolution 1,024,000 pixels

WXGA (1,280 (W) × 800 (H) dots) × 3

Focus adjustment Manual

Zoom adjustment EB‑‑982W

1 to 1.6 (Optical Zoom)

EB‑‑W49/EB‑‑W52/EB‑‑W51/EB‑‑W06

1 to 1.2 (Optical Zoom)

Lamp EB‑‑982W

UHE lamp, 230 W Model No.: ELPLP97

EB‑‑W49/EB‑‑W52/EB‑‑W51/EB‑‑W06

UHE lamp, 210 W Model No.: ELPLP97

Projector Specifications 196

Lamp life EB‑‑982W

High Power Consumption mode: Up to 6,500 hours

Medium Power Consumption mode: Up to 10,000 hours

ECO Power Consumption mode: Up to 17,000 hours

EB‑‑W49

High Power Consumption mode: Up to 8,000 hours

Medium Power Consumption mode: Up to 10,000 hours

ECO Power Consumption mode: Up to 17,000 hours

EB‑‑W52/EB‑‑W51/EB‑‑W06

High Power Consumption mode: Up to 6,000 hours

ECO Power Consumption mode: Up to 12,000 hours

Air filter maintenance

cycle

EB‑‑982W

10,000 hours

EB‑‑W49/EB‑‑W52/EB‑‑W51/EB‑‑W06

6,000 hours

Max. audio output EB‑‑982W

16 W

EB‑‑W49

5 W

EB‑‑W52/EB‑‑W51/EB‑‑W06

2 W

Speaker 1

Power supply 100-240V AC±10% 50/60Hz 3.5 - 1.6 A

Power consumption

(100 to 120 V area)

Operating: 345 W

Power consumption

(220 to 240 V area)

Operating: 327 W

Standby power

consumption

Communication On: 2.0 W

Communication Off: 0.3 W

Operating altitude Altitude 0 to 3,048 m

Operating

temperature *

Altitude of 0 to 2,286 m: +5 to +40°C (No condensation)

Altitude of 2,287 to 3,048 m: +5 to +35°C (Humidity of 20

to 80%, No condensation)

Storage temperature -10 to +60°C (Humidity of 10 to 90%, No condensation)

Mass EB‑‑982W:

Approx. 3.1 kg

EB‑‑W52:

Approx. 2.6 kg

EB‑‑W49:

Approx. 2.7 kg

EB‑‑W51/EB‑‑W06:

Approx. 2.5 kg

* Lamp brightness automatically dims if the surrounding temperature gets too

high. (Approximately 35°C at an altitude of 0 to 2,286 m, and approximately

30°C at an altitude of 2,287 to 3,048 m; however, this may vary depending on

the surrounding environment.)

This product is also designed for IT power distribution system with phase-to-

phase voltage 230V.

EB‑‑992F/EB‑‑FH52/EB‑‑FH06

Product name EB‑992F/EB‑FH52/EB‑FH06

Dimensions EB‑‑992F/EB‑‑FH52

309 (W) × 90 (H) × 282 (D) mm (not including raised

section)

EB‑‑FH06

302 (W) × 87 (H) × 249 (D) mm (not including raised

section)

LCD panel size 0.61"

Display method Poly-silicon TFT active matrix

Resolution 2,073,600 pixels

Full HD (1,920 (W) × 1,080 (H) dots) × 3

Focus adjustment Manual

Projector Specifications 197

Zoom adjustment EB‑‑992F/EB‑‑FH52

1 to 1.6 (Optical Zoom)

EB‑‑FH06

1 to 1.2 (Optical Zoom)

Lamp EB‑‑992F/EB‑‑FH52

UHE lamp, 230 W Model No.: ELPLP97

EB‑‑FH06

UHE lamp, 210 W Model No.: ELPLP97

Lamp life EB‑‑992F

High Power Consumption mode: Up to 6,500 hours

Medium Power Consumption mode: Up to 10,000 hours

ECO Power Consumption mode: Up to 17,000 hours

EB‑‑FH52

High Power Consumption mode: Up to 5,500 hours

ECO Power Consumption mode: Up to 12,000 hours

EB‑‑FH06

High Power Consumption mode: Up to 6,000 hours

ECO Power Consumption mode: Up to 12,000 hours

Air filter maintenance

cycle

EB‑‑992F/EB‑‑FH52

10,000 hours

EB‑‑FH06

6,000 hours

Max. audio output EB‑‑992F/EB‑‑FH52

16 W

EB‑‑FH06

2 W

Speaker 1

Power supply 100-240V AC±10% 50/60Hz 3.5 - 1.6 A

Power consumption

(100 to 120 V area)

Operating: 345 W

Power consumption

(220 to 240 V area)

Operating: 327 W

Standby power

consumption

Communication On: 2.0 W

Communication Off: 0.3 W

Operating altitude Altitude 0 to 3,048 m

Operating

temperature *

Altitude of 0 to 2,286 m: +5 to +40°C (No condensation)

Altitude of 2,287 to 3,048 m: +5 to +35°C (Humidity of 20

to 80%, No condensation)

Storage temperature -10 to +60°C (Humidity of 10 to 90%, No condensation)

Mass EB‑‑992F/EB‑‑FH52:

Approx. 3.1 kg

EB‑‑FH06:

Approx. 2.7 kg

* Lamp brightness automatically dims if the surrounding temperature gets too

high. (Approximately 35°C at an altitude of 0 to 2,286 m, and approximately

30°C at an altitude of 2,287 to 3,048 m; however, this may vary depending on

the surrounding environment.)

This product is also designed for IT power distribution system with phase-to-

phase voltage 230V.

Angle of tilt

If you use the projector tilted at an angle of more than 30˚ it could be

damaged and cause an accident.

gg Related Links

• "Connector Specifications" p.198

Projector Specifications 198

Connector Specifications

See the List of Functions for details on the ports on your projector.

Computer port Mini D-Sub15-pin (female)

Computer1 port Mini D-Sub15-pin (female)

Computer2 port Mini D-Sub15-pin (female)

Monitor Out port Mini D-Sub15-pin (female)

Video port RCA pin jack

Audio 1 port Stereo mini pin jack

Audio 2 port Stereo mini pin jack

L-Audio-R ports RCA pin jack × 2 (L-R)

Mic port Stereo mini pin jack

Audio Out port Stereo mini pin jack

HDMI port HDMI (Audio is only supported by

PCM)

HDMI1 port HDMI (Audio is only supported by

PCM)

HDMI2 port HDMI (Audio is only supported by

PCM)

USB-A port USB connector (Type A)

USB-B port USB connector (Type B)

LAN port RJ-45

RS-232C port Mini D-Sub 9-pin (male)

a• USB-A and USB-B port supports USB 2.0. However, USB ports are

not guaranteed to operate all devices that support USB.

• USB-B port does not support USB 1.1.

gg Related Links

• "List of Functions" p.10

External Dimensions 199

EB‑‑W51/EB‑‑X51/EB‑‑E10/EB‑‑W06/EB‑‑X06/EB‑‑E01/EB‑‑X500/VS260

EB‑‑118/EB‑‑W49/EB‑‑X49/EB‑‑E20/EB‑‑W52/EB‑‑FH06

EB‑‑992F/EB‑‑982W/EB‑‑972/EB‑‑FH52

ACenter of lens

BDistance from center of lens to suspension bracket fixing point

EB‑‑W51/EB‑‑X51/EB‑‑E10/EB‑‑W06/EB‑‑X06/EB‑‑E01/EB‑‑X500/VS260

External Dimensions 200

EB‑‑W52 EB‑‑FH06

External Dimensions 201

EB‑‑W49/EB‑‑X49/EB‑‑E20 EB‑‑118

External Dimensions 202

EB‑‑992F/EB‑‑982W/EB‑‑972/EB‑‑FH52

The unit in these illustrations is mm.

USB Display System Requirements 203

To use the projector's Epson USB Display software, your computer must meet

the following system requirements.

Requirement Windows Mac

Operating system Windows 7

• Ultimate (32- and 64-bit)

• Enterprise (32- and 64-bit)

• Professional (32- and 64-bit)

• Home Premium (32- and 64-

bit)

• Home Basic (32-bit)

• Starter (32-bit)

OS X

• 10.8.x (64-bit)

• 10.9.x (64-bit)

• 10.10.x (64-bit)

• 10.11.x (64-bit)

Windows 8.1

• Windows 8.1 (32- and 64-bit)

• Windows 8.1 Pro (32- and 64-

bit)

• Windows 8.1 Enterprise (32-

and 64-bit)

macOS

• 10.12.x (64-bit)

• 10.13.x (64-bit)

• 10.14.x (64-bit)

Windows 10

• Windows 10 Home (32- and

64-bit)

• Windows 10 Pro (32- and 64-

bit)

• Windows 10 Enterprise (32-

and 64-bit)

CPU Intel Core2Duo or faster

(Intel Core i3 or faster

recommended)

Intel Core2Duo or faster

(Intel Core i5 or faster

recommended)

Memory 2 GB or more

(4 GB or more recommended)

Hard disk space 20 MB or more

Display Resolution between 640 × 480 and 1920 × 1200

16-bit color or greater

List of Safety Symbols and Instructions 204

The following table lists the meaning of the safety symbols labeled on the

equipment.

No. Symbol mark Approved

standards

Description

AIEC60417

No. 5007

"ON" (power)

To indicate connection to the mains.

BIEC60417

No. 5008

"OFF" (power)

To indicate disconnection from the

mains.

CIEC60417

No. 5009

Stand-by

To identify the switch or switch

position by means of which part of the

equipment is switched on in order to

bring it into the stand-by condition.

DISO7000

No. 0434B,

IEC3864-B3.1

Caution

To identify general caution when

using the product.

EIEC60417

No. 5041

Caution, hot surface

To indicate that the marked item can

be hot and should not be touched

without taking care.

FIEC60417

No. 6042

ISO3864-B3.6

Caution, risk of electric shock

To identify equipment that has risk of

electric shock.

GIEC60417

No. 5957

For indoor use only

To identify electrical equipment

designed primarily for indoor use.

HIEC60417

No. 5926

Polarity of d.c. power connector

To identify the positive and negative

connections (the polarity) on a piece

of equipment to which a d.c. power

supply may be connected.

No. Symbol mark Approved

standards

Description

I— The same as No. 8.

JIEC60417

No. 5001B

Battery, general

On battery powered equipment. To

identify a device for instance a cover

for the battery compartment, or the

connector terminals.

KIEC60417

No. 5002

Positioning of cell

To identify the battery holder itself

and to identify the positioning of the

cell(s) inside the battery holder.

L— The same as No. 11.

MIEC60417

No. 5019

Protective earth

To identify any terminal which is

intended for connection to an external

conductor for protection against

electric shock in case of a fault, or the

terminal of a protective earth

electrode.

NIEC60417

No. 5017

Earth

To identify an earth (ground) terminal

in cases where neither the symbol No.

13 is explicitly required.

OIEC60417

No. 5032

Alternating current

To indicate on the rating plate that the

equipment is suitable for alternating

current only; to identify relevant

terminals.

PIEC60417

No. 5031

Direct current

To indicate on the rating plate that the

equipment is suitable for direct

current only; to identify relevant

terminals.

List of Safety Symbols and Instructions 205

No. Symbol mark Approved

standards

Description

QIEC60417

No. 5172

Class II equipment

To identify equipment meeting the

safety requirements specified for Class

II equipment according to IEC 61140.

RISO 3864 General prohibition

To identify actions or operations that

are prohibited.

SISO 3864 Contact prohibition

To indicate injury that could occur

due to touching a specific part of the

equipment.

T— Never look into the optical lens while

the projector is on.

U— To indicate that the marked item don’t

place anything on projector.

VISO3864

IEC60825-1

Caution, laser radiation

To indicate the equipment has a laser

radiation part.

WISO 3864 Disassembly prohibition

To indicate a risk of injury, such as

electric shock, if the equipment is

disassembled.

XIEC60417

No. 5266

Standby, partial standby

To indicate that part of the equipment

is in the ready status.

YISO3864

IEC60417

No. 5057

Caution, movable parts

To indicate that you must keep away

from movable parts according to

protection standards.

ZIEC60417

No. 6056

Caution (Moving Fan Blades)

As a safety precaution, stay away from

the moving fan blades.

No. Symbol mark Approved

standards

Description

aIEC60417

No. 6043

Caution (Sharp Corners)

To indicate sharp corners that should

not be touched.

b— To indicate that looking into the lens

while projecting is prohibited.

cISO7010

No. W027

ISO 3864

Warning, Optical radiation (such as

UV, visible radiation, IR)

Taking care to avoid injury to eyes and

skin when in the vicinity of optical

radiation.

dIEC60417

No. 5109

Not to be used in residential areas.

To identify electrical equipment which

is not suitable for a residential area.

Glossary 206

This section briefly explains the difficult terms that are not explained in the

text of this guide. For details, refer to other commercially available

publications.

AMX Device

Discovery

AMX Device Discovery is a technology developed by AMX to

facilitate AMX control systems for easy operation of the target

equipment.

Epson have implemented this protocol technology, and have

provided a setting to enable the protocol function (ON).

See the AMX Web site for more details.

URL http://www.amx.com/

Aspect Ratio The ratio between an image's length and its height.

Screens with a horizontal:vertical ratio of 16:9, such as HDTV

screens, are known as wide screens.

SDTV and general computer displays have an aspect ratio of

4:3.

Composite Video A method that combines the video signal into a luminance

component and a color component for transmission down a

single cable.

Contrast The relative brightness of the light and dark areas of an image

can be increased or decreased to make text and graphics stand

out more clearly, or to make them appear softer. Adjusting this

particular property of an image is called contrast adjustment.

DHCP An abbreviation of Dynamic Host Configuration Protocol, this

protocol automatically assigns an IP address to equipment

connected to a network.

Full HD A screen size standard with a resolution of 1,280 (horizontal) ×

1,080 (vertical) dots.

Gateway Address This is a server (router) for communicating across a network

(subnet) divided according to subnet mask.

HDCP HDCP is an abbreviation for High-bandwidth Digital Content

Protection.

It is used to prevent illegal copying and protect copyrights by

encrypting digital signals sent over DVI and HDMI ports.

Because the HDMI port on this projector supports HDCP, it

can project digital images protected by HDCP technology.

However, the projector may not be able to project images

protected with updated or revised versions of HDCP

encryption.

HDMI™An abbreviation for High Definition Multimedia Interface.

HDMI™is a standard aimed at digital consumer electronics and

computers. This is the standard by which HD images and

multichannel audio signals are digitally transmitted.

By not compressing the digital signal, the image can be

transferred at the highest quality possible. It also provides an

encryption function for the digital signal.

HDTV An abbreviation for High-Definition Television that refers to

high-definition systems which satisfy the following conditions:

• Vertical resolution of 720p or 1080i or greater (p =

Progressive, i = Interlace)

• Screen aspect ratio of 16:9

Interlace Transmits information needed to create one screen by sending

every other line, starting from the top of the image and working

down to the bottom.

Images are more likely to flicker because one frame is displayed

every other line.

IP Address A number to identify a computer connected to a network.

Progressive Projects information to create one screen at a time, displaying

the image for one frame.

Even though the number of scan lines is the same, the amount

of flicker in images decreases because the volume of

information has doubled compared with an interlace system.

Glossary 207

Refresh Rate The light-emitting element of a display maintains the same

luminosity and color for an extremely short time.

Because of this, the image must be scanned many times per

second to refresh the light-emitting element.

The number of refresh operations per second is called the

Refresh rate and is expressed in hertz (Hz).

SDTV An abbreviation for Standard Definition Television that refers

to standard television systems which do not satisfy the

conditions for HDTV High-Definition Television.

SNMP An abbreviation for Simple Network Management Protocol,

which is the protocol for monitoring and controlling devices

such as routers and computers connected to a TCP/IP network.

sRGB An international standard for color intervals that was

formulated so that colors that are reproduced by video

equipment can be handled easily by computer operating

systems (OS) and the Internet. If the connected source has an

sRGB mode, set both the projector and the connected signal

source to sRGB.

SSID SSID is identification data for connecting to another device on

a wireless LAN. Wireless communication is possible between

devices with the same SSID.

Subnet Mask This is a numerical value that defines the number of bits used

for the network address on a divided network (subnet) from the

IP address.

SVGA A screen size standard with a resolution of 800 (horizontal) ×

600 (vertical) dots.

SXGA A screen size standard with a resolution of 1,280 (horizontal) ×

1,024 (vertical) dots.

Sync. The signals output from computers have a specific frequency.

If the projector frequency does not match this frequency, the

resulting images are not of a good quality.

The process of matching the phases of these signals (the relative

position of the crests and the troughs in the signal) is called

Synchronization.

If the signals are not synchronized, flickering, blurriness, and

horizontal interference occur.

Tracking The signals output from computers have a specific frequency.

If the projector frequency does not match this frequency, the

resulting images are not of a good quality.

The process of matching the frequency of these signals (the

number of crests in the signal) is called Tracking.

If Tracking is not carried out correctly, wide vertical stripes

appear in the signal.

Trap IP Address This is the IP address for the destination computer used for

error notification in SNMP.

VGA A screen size standard with a resolution of 640 (horizontal) ×

480 (vertical) dots.

XGA A screen size standard with a resolution of 1,024 (horizontal) ×

768 (vertical) dots.

WXGA A screen size standard with a resolution of 1,280 (horizontal) ×

800 (vertical) dots.

WUXGA A screen size standard with a resolution of 1,920 (horizontal) ×

1,200 (vertical) dots.

Notices 208

Check these sections for important notices about your projector.

gg Related Links

• "FCC Compliance Statement" p.208

• "Indication of the manufacturer and the importer in accordance with

requirements of EU directive" p.209

• "Restriction of Use" p.209

• "Operating System References" p.209

• "Trademarks" p.209

• "Copyright Notice" p.210

• "Copyright Attribution" p.210

FCC Compliance Statement

Supplier's DECLARATION of CONFORMITY

According to 47CFR, Part 2 and 15

Class B Personal Computers and Peripherals; and/or

CPU Boards and Power Supplies used with Class B Personal Computers

We: Epson America, Inc.

Located at: 3131 Katella Ave., Los Alamitos, CA 90720

Tel: 562-981-3840

Declare under sole responsibility that the product identified herein, complies

with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each

product marketed, is identical to the representative unit tested and found to

be compliant with the standards. Records maintained continue to reflect the

equipment being produced can be expected to be within the variation

accepted, due to quantity production and testing on a statistical basis as

required by 47CFR 2.906. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interface received, including interference that may

cause undesired operation.

Trade Name: EPSON

Type of Product: LCD Projector

Model:

H971C/H972C/H973C/H974C/H975C/H976C/H977C/HA02C/H978C/H979

C/H980C/H981C/H982C/H983C/HA03C/H985C/H986C/H987C/H988C

Options:

Product name Model

Remote controller 2198635 xx (x=0-9)

FCC Compliance Statement For United States Users

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause interference to radio and television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the

following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this

equipment will invalidate the FCC Certification or Declaration of this device

and may cause interference levels which exceed the limits established by the

FCC for this equipment. It is the responsibility of the user to obtain and use a

shielded equipment interface cable with this device. If this equipment has

Notices 209

more than one interface connector, do not leave cables connected to unused

interfaces. Changes or modifications not expressly approved by the

manufacturer could void the user's authority to operate the equipment.

Statement for Canadian EMC Rules

Indication of the manufacturer and the importer in

accordance with requirements of EU directive

Manufacturer: SEIKO EPSON CORPORATION

Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan

Telephone: 81-266-52-3131

http://www.epson.com/

Importer: EPSON EUROPE B.V.

Address: Atlas Arena, Asia Building, Hoogoorddreef 5,1101 BA Amsterdam

Zuidoost

The Netherlands

Telephone: 31-20-314-5000

http://www.epson.eu/

Restriction of Use

When this product is used for applications requiring high reliability/safety

such as transportation devices related to aviation, rail, marine, automotive

etc.; disaster prevention devices; various safety devices etc; or

functional/precision devices etc, you should use this product only after giving

consideration to including fail-safes and redundancies into your design to

maintain safety and total system reliability. Because this product was not

intended for use in applications requiring extremely high reliability/safety

such as aerospace equipment, main communication equipment, nuclear

power control equipment, or medical equipment related to direct medical care

etc, please make your own judgment on this product’s suitability after a full

evaluation.

Operating System References

• Microsoft®Windows Vista®operating system

• Microsoft®Windows®7 operating system

• Microsoft®Windows®8 operating system

• Microsoft®Windows®8.1 operating system

• Microsoft®Windows®10 operating system

In this guide, the operating systems above are referred to as "Windows Vista",

"Windows 7", "Windows 8", "Windows 8.1", and "Windows 10". Furthermore,

the collective term "Windows" is used to refer to them all.

• OS X 10.7.x

• OS X 10.8.x

• OS X 10.9.x

• OS X 10.10.x

• OS X 10.11.x

• macOS 10.12.x

• macOS 10.13.x

• macOS 10.14.x

In this guide, the operating systems above are referred to as "OS X 10.7.x", "OS

X 10.8.x", "OS X 10.9.x", "OS X 10.10.x", "OS X 10.11.x", "macOS 10.12.x",

"macOS 10.13.x", and "macOS 10.14.x". Furthermore, the collective term

"Mac" is used to refer to them all.

Trademarks

EPSON is a registered trademark, EXCEED YOUR VISION, ELPLP and their

logos are registered trademarks or trademarks of Seiko Epson Corporation.

Notices 210

Mac, OS X, and macOS are trademarks of Apple Inc.

Microsoft, Windows, Windows Vista, and the Windows logo are trademarks

or registered trademarks of Microsoft Corporation in the United States and/or

other countries.

Wi-Fi™, WPA2™, WPA3™, and Miracast™are trademarks of Wi-Fi Alliance®.

App Store is a service mark of Apple Inc.

Chrome, Chromebook, and Google Play are trademarks of Google LLC.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

"QR Code" is a registered trademark of DENSO WAVE INCORPORATED.

PJLink trademark is a trademark applied for registration or is already

registered in Japan, the United States of America and other countries and

areas.

Crestron®, Crestron Connected®, Crestron Fusion®, Crestron Control®, and

Crestron RoomView®are registered trademarks of Crestron Electronics, Inc.

Intel®is a registered trademark of Intel Corporation in the U.S. and/or other

countries.

Other product names used herein are also for identification purposes only

and may be trademarks of their respective owners. Epson disclaims any and

all rights in those marks.

retrieval system, or transmitted in any form or by any means, electronic,

mechanical, photocopying, recording, or otherwise, without the prior written

permission of Seiko Epson Corporation. No patent liability is assumed with

respect to the use of the information contained herein. Neither is any liability

assumed for damages resulting from the use of the information contained

herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the

purchaser of this product or third parties for damages, losses, costs, or

expenses incurred by the purchaser or third parties as a result of: accident,

misuse, or abuse of this product or unauthorized modifications, repairs, or

alterations to this product, or (excluding the U.S.) failure to strictly comply

with Seiko Epson Corporation's operating and maintenance instructions.

Seiko Epson Corporation shall not be liable against any damages or problems

arising from the use of any options or any consumable products other than

those designated as Original Epson Products or Epson Approved Products by

Seiko Epson Corporation.

The contents of this guide may be changed or updated without further notice.

Illustrations in this guide and the actual projector may differ.

This information is subject to change without notice.

10/20

CPD-60228R1

Table of Contents

Epson VS260 User Manual

Related Manuals