Gigabyte AORUS FI32Q-X User Manual
Displayed below is the user manual for AORUS FI32Q-X by Gigabyte which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
AORUS FI32Q X
TACTICAL
GAMING MONITOR
USER GUIDE
LCD Monitor User's Manual
- 2 -
Copyright
© 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their
respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the
property of
GIGABYTE.
Changes to the specications and features in this manual may be made
by
GIGABYTE without prior notice.
No part of this manual may be reproduced, copied, translated,
transmitted, or published in any form or by any means without
GIGABYTE’s prior written permission.
• In order to assist in the use of this monitor, carefully read the User
Guide.
• For more information, check on our website at:
https://www.gigabyte.com
LCD Monitor User's Manual
- 3 -
Safety Precautions
Read through the following Safety Precautions before using the monitor.
• Only use the accessories that are provided with the monitor or that
which are recommended by the manufacturer.
• Keep the plastic packaging bag for the product in a place that cannot
be reached by children.
• Before connecting the monitor to the power outlet, make sure that
the voltage rating of the power cable is compatible with the power
specication in the country where you are located.
• The power cord plug must be connected to a properly wired and
grounded power outlet.
• Do not touch the plug with wet hands, otherwise easily cause electric
shock.
• Place the monitor in a stable and well-ventilated place.
• Do not place the monitor near any heat sources such as electric
radiators or direct sunlight.
• The holes or openings on the monitor are for ventilation. Do not cover
or block the ventilation holes with any objects.
• Do not use the monitor near water, drinks, or all types of liquids.
Failure to do so may result in electric shock or damage to the monitor.
• Make sure to unplug the monitor from the power outlet before
cleaning.
• As the screen surface is easy to be scratched, avoid touching the
surface with any hard or sharp object.
• Use a soft lint-free cloth instead of a tissue to wipe the screen. You may
use a glass cleaner to clean the monitor if required. However, never
spray the cleaner directly onto the screen.
• Disconnect the power cable if the monitor is not being used for a long
period of time.
• Do not attempt to disassemble or repair the monitor yourself.
LCD Monitor User's Manual
- 4 -
Stability Hazard Precautions
The product may fall, causing serious personal injury or death. To prevent
injury, this product must be securely attached to the oor/wall in accor-
dance with the installation instructions.
Many injuries, particularly to children, can be avoided by taking simple
precautions such as:
• ALWAYS use stands or installation methods recommended by the
manufacturer of the product set.
• ALWAYS use furniture that can safely support the product.
• ALWAYS ensure the product is not overhanging the edge of the
supporting furniture.
• ALWAYS educate children about the dangers of climbing on furniture
to reach the product or its controls.
• ALWAYS route cords and cables connected to your product so they
cannot be tripped over, pulled or grabbed.
• NEVER place the product on tall furniture (for example, cupboards or
bookcases) without
• anchoring both the furniture and the product to a suitable support.
• NEVER place the product on cloth or other materials that may be
located between the product and supporting furniture.
• NEVER place items that might tempt children to climb, such as toys
and remote controls, on the top of the product or furniture on which
the product is placed.
• If the existing product is going to be retained and relocated, the same
considerations as above should be applied.
• To prevent personal injury or damage to the product caused by
tipping over due to earthquakes or other shocks, make sure to install
the product in a stable location and take measures to prevent falling.
LCD Monitor User's Manual
- 5 -
Contents
INTRODUCTION ........................................................................... 7
Unpacking ...................................................................................................7
Package Contents ....................................................................................9
Product Overview ....................................................................................10
GETTING STARTED ...................................................................... 12
Installing the Monitor Base ...................................................................12
Lift the monitor .........................................................................................14
Installing the AORUS Desk Mount Kit ...............................................15
Adjusting the Viewing Angle ...............................................................18
Installing a Wall-Mount Bracket (Optional) .....................................20
Making Connections ...............................................................................22
USING THE DEVICE ...................................................................... 23
Turning the Power On/O .....................................................................23
User Comfort Recommendations ....................................................... 24
Selecting the Input Source ...................................................................25
OPERATIONS ................................................................................ 26
Quick Menu ................................................................................................26
Function Key Guide .................................................................................27
Congure the Device Settings .............................................................31
APPENDICES ................................................................................ 43
Specications .............................................................................................43
Supported Timing List ............................................................................44
Troubleshooting .......................................................................................45
LCD Monitor User's Manual
- 6 -
Basic Care ....................................................................................................46
Notes on USB Charging .......................................................................... 46
GIGABYTE Service Information ............................................................46
SAFETY INFORMATION ............................................................... 47
Regulatory Notices ..................................................................................47
LCD Monitor User's Manual
- 7 -
INTRODUCTION
Unpacking
1. Open the upper cover of the packaging box. Then observe the
unpacking instruction attached on the inner cover. Making
sure the box is in the correct orientation, carefully lay the box
on the stable surface.
UP
2. Remove the items from the upper EPS foam.
LCD Monitor User's Manual
- 8 -
3. Remove the upper EPS foam. Then you can remove the stand from
the lower EPS foam.
LCD Monitor User's Manual
- 9 -
Package Contents
The following items come with your packaging box. If any of them is
missing, please contact your local dealer.
Monitor Monitor Base Power Cable
HDMI Cable
Type-C Cable
USB CableStand DP Cable
Multilingual
Installation
Guide
Warranty Card
Quick Start Guide Warranty Card
Note: Please keep the packaging box and packing materials for future
transportation of the monitor.
LCD Monitor User's Manual
- 10 -
Product Overview
Front View
1
2
1 Power LED 2 Control button
LCD Monitor User's Manual
- 11 -
Rear View
98
65431 710
2
1 AC IN jack
2 Kensington lock
3 HDMI ports (x2)
4 DisplayPort
5 Type-C port
6 USB upstream port
7 USB 3.0 ports (x2)
8 Microphone jack
9 Headphone jack
10 Line out port
LCD Monitor User's Manual
- 12 -
GETTING STARTED
Installing the Monitor Base
1.
Place the monitor on the lower EPS foam, with the screen facing
down.
2.
Align and slide the hooks of the stand into the mounting slots on the
rear of the screen.
3.
Align the monitor base with the stando underneath the stand. Then
attach the base onto the stand.
LCD Monitor User's Manual
- 13 -
4.
Lift the screw ring and turn it clockwise to secure the monitor base in
place.
or or
Note: You can either use a coin or a small athead screwdriver to tighten the
screw.
LCD Monitor User's Manual
- 14 -
Lift the monitor
Take the monitor out of the box by holding the stand arm. Carefully
lift the monitor, turn it over and place it upright on its stand on a
at even surface.Remove the foam wrap from the monitor.
Note: Consider keeping the box and packaging in storage for use in the future
when you may need to transport the monitor. The tted foam packing is ideal for
protecting the monitor during transport.
LCD Monitor User's Manual
- 15 -
Installing the AORUS Desk Mount Kit
1.
Unpack the AORUS Desk Mount Kit and the hex key.
2.
Align the monitor base with the stando underneath the stand. Then
lift the screw ring and turn it clockwise to secure the monitor base in
place.
1
2
LCD Monitor User's Manual
- 16 -
The AORUS Desk Mount Kit attaches the monitor to surfaces up to
70 mm thick. Before starting, make sure you have enough room to
t the entire clamp and the surface is sturdy and at.
20~70mm
Note: We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
3.
Align and slide the hooks of the stand into the mounting slots on the
rear of the screen.
LCD Monitor User's Manual
- 17 -
CAUTION!
The C-clamp accessory is designed to be used with this monitor
only. Using this accessory with any other product may result in
damage and/or injury.
Make sure the mounting surface is at and strong enough to
handle the monitor. Do not install on glass surfaces.
Improper installation may cause property damage and/or
personal injury.
LCD Monitor User's Manual
- 18 -
Adjusting the Viewing Angle
Note: Hold the monitor base so that the screen does not topple when you
make the adjustment.
Adjusting the Tilt Angle
Tilt the screen forward or backward to the desired viewing angle
(-5˚ to 21˚).
Adjusting the Swivel Angle
Swivel the screen to the left or right for the desired viewing angle (20˚).
20° 20°
LCD Monitor User's Manual
- 19 -
Changing the Screen Orientation
1. Raise the screen to the highest position (130mm).
130 mm
Note: Before making the height adjustment, make sure you have removed
the safety plate from the stand.
2. Rotate the monitor (90˚ clockwise) to portrait orientation.
LCD Monitor User's Manual
- 20 -
Installing a Wall-Mount Bracket (Optional)
Use only the 100 x 100 mm wall mount kit recommended by the
manufacturer.
1.
Place the monitor on a at surface, with the screen facing down.
Note: We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
2.
Push the locking clips inward to detach the stand from the monitor.
3.
Pull down the stand slightly to disengage the hooks. Then remove
the stand.
LCD Monitor User's Manual
- 21 -
4.
Attach the mounting bracket to the mounting holes at the rear of
the monitor. Then use the screws to secure the bracket in place.
Note: To mount the monitor on the wall, refer to the installation guide that is
included in the wall-mount bracket kit. VESA mounting screw size: M4 x 8mm
minimum.
LCD Monitor User's Manual
- 22 -
Making Connections
1
124
35
6
7 8 9
1 Power cable
2 HDMI cable
3 DisplayPort cable
4 Type-C cable
5 USB (A-Male to B-Male) cable
6 USB cable
7 Microphone cable
8 Headphone cable
9 Audio cable
LCD Monitor User's Manual
- 23 -
USING THE DEVICE
Turning the Power On/O
Make sure the power switch next to the AC power input jack is switched
to ON.
Power On
1. Connect one end of the power cable to the AC IN jack at the rear of
the monitor.
2. Connect other end of the the power cable to a power outlet.
3. Press the Control button to turn on the monitor. The Power LED will
light in white, indicating the monitor is ready to use.
Note: If the Power LED remains o after you turn on the monitor, please check
the LED Indicator setting in the Settings menu. Refer to page 40 .
Note: When monitor power on, RGB LED on the rear side of monitor will turn
o automatically after 15 seconds in default setting. Please check the RGB LED
setting in the System menu for select dierent RGB LED patterns.
LCD Monitor User's Manual
- 24 -
Power O
Press the Control button for 2 seconds to turn o the monitor.
Note: When the Main menu appears on the screen, you can also turn o the
monitor by moving the Control button down ( ). Refer to page 27 .
User Comfort Recommendations
The following are some tips for comfortable viewing of your monitor:
• Optimal viewing distances for monitors range from approximately
510 mm to 760 mm (20 in to 30 in).
• A general guideline is to position the monitor such that the top
of the screen is at or slightly below your eye-height when you are
comfortably seated.
• Use adequate lighting for the type of work you are performing.
• Take regular and frequent breaks (at least for 10 minutes) every half-
hour.
• Be sure to periodically look away from your monitor screen and focus
on a far object for at least 20 seconds during the breaks.
• Eye exercise can help reduce eye strain. Repeat these exercises
frequently: (1) look up and down (2) slowly roll your eye (3) move
your eyes diagonally.
LCD Monitor User's Manual
- 25 -
Selecting the Input Source
1. Move the Control button
right ( ) to enter the Input
menu.
2. Move the Control button center
( ) to select the desired input
source. Then press the Control
button to conrm.
Select Exit
Input
DisplayPort
Type-C
HDMI 1
HDMI2
LCD Monitor User's Manual
- 26 -
OPERATIONS
Quick Menu
Hot Key
By default, the Control button has been assigned with the specic
function.
Note: To change the preset hot key function, refer to the “Quick Switch” section
on page 39 .
To access the hot key function, do the following:
• Move the Control button up ( ) to enter the Black Equalizer menu.
Move the Control button up/
down ( ) to adjust the
setting and press the Control but-
ton to conrm.
Adjust Exit
Black Equalizer
10
LCD Monitor User's Manual
- 27 -
• Move the Control button down ( ) to enter the Picture Mode menu.
Move the Control button center
( ) to select the desired option
and press the Control button to
conrm.
Select Exit
Picture Mode
Standard
Arcade
FPS
RTS/RPG
Movie
Reader
• Move the Control button left ( ) to enter the Volume(ESS USB)
menu.
Move the Control button up/
down ( ) to adjust the head-
phone volume level and press the
Control button to conrm.
Adjust Exit
Volume(ESS USB)
30
• Move the Control button right ( ) to enter the the Input menu.
Refer to the “Selecting the Input Source” section.
Note: To close the menu, move the Control button left ( ).
Function Key Guide
LCD Monitor User's Manual
- 28 -
• Press the Control button to display the Main menu.
EXIT
SETTING
POWER OFF
GAME ASSISTDASHBOARD
Game Assist
Power Off
Settings
Dashboard
Exit
Then use the Control button to select the desired function and
congure the related settings.
Dashboard
When the Main menu appears on the screen, move the Control button
left ( ) to enter the Dashboard menu.
Select Exit
Dashboard
Function
Dashboard
Location
ON
OFF
CPU Temperature
CPU Frequency
CPU Fan Speed
CPU Fan Speed
CPU Usage Rate
GPU Temperature
GPU Frequency
• Function: Enable/Disable the function. When enabled, you can
select the desired option(s) to be shown on the screen.
• Dashboard Location: Specify the location of the Dashboard
information to be shown on the screen.
LCD Monitor User's Manual
- 29 -
Once the Dashboard conguration is complete, it will transfer
the system data to the SOC through the USB port and display
the value of the selected function(s) on the screen.
AORUS Mouse DPI
CPU temperature
CPU frequency
CPU fan Speed
CPU usage Rate
GPU temperature
GPU frequency
GPU fan speed
GPU usage rate
Note: Make sure the USB cable is properly connected to the USB upstream port
of the monitor and the USB port of your computer.
Note: “OSD Sidekick” software installation and execution required.
LCD Monitor User's Manual
- 30 -
Game Assist
• When the Main menu appears on the screen, move the Control
button right ( ) to enter the Game Assist menu.
Select Exit
GameAssist
AORUS INFO
Display
Alignment
Gaming Timer
Crosshair
Gaming Counter
Refresh Rate
Info Location
• AORUS INFO: Congure the FPS (First Person Shooting) game
related settings.
√ Select Gaming Timer to select countdown timer mode. To
disable this function, set the setting to OFF.
√ Select Gaming Counter or Refresh Rate to enable/disable the gam-
ing counter or real-time refresh rate setting.
√ Select Info Location to specify the location of the
information to be shown on the screen.
01:57
0
60
LCD Monitor User's Manual
- 31 -
• Crosshair: Select the desired crosshair type to suit your gaming
environment. It makes aiming much easier.
• Display Alignment: When the function is enabled, it displays the
alignment lines on the four sides of the screen, providing handy tool
for you to line up multiple monitors perfectly.
Congure the Device Settings
When the Main menu appears on the screen, move the Control button
up ( ) to enter the Settings menu.
Note: Use the Control button to navigate through the menu and make adjust-
ments.
Exit
Move/Adjust
Enter/Confirm
Button Guide
LCD Monitor User's Manual
- 32 -
Gaming
Congure the game related settings.
Exit
Move/Adjust
Enter/Conrm
Gaming
Picture
Display
PIP/PBP
System
Reset All
Aim Stabilizer Sync
Black Equalizer
Super Resolution
Display Mode
Overdrive
Adaptive Sync
ON
OFF
Picture Mode Standard
Resolution Black Equalizer Aim Stabilizer Sync Overdrive Refresh Rate
2560x1440 15 OFF Smart OD 144 HZ
Adaptive Sync
OFF
Save Settings
Item Description
Aim Stabilizer Sync When this function is enabled, it reduces the motion
blur in a fast moving games.
Note: This function is not available under the following
conditions:
- when the frequency setting is lower than 100Hz.
- when the FreeSync function is activated.
Black
Equalizer
Adjust the brightness of the black areas.
Super
Resolution
Sharpen the low resolution images.
LCD Monitor User's Manual
- 33 -
Item Description
Display Mode Select the aspect ratio of the screen.
•
Full: Scale the input image to ll the screen.
Ideal for 16:9 aspect images.
•
Aspect: Display the input image without
geometric distortion lling as much of the
screen as possible.
•
1:1: Display the input image in its native
resolution without scaling.
•
22”W (16:10): Display the input image as if
on a 22”W monitor of 16:10 aspect ratio.
•
23”W (16:9): Display the input image as if
on a 23”W monitor of 16:9 aspect ratio.
•
23.6”W (16:9): Display the input image as if
on a 23.6”W monitor of 16:9 aspect ratio.
•
24”W (16:9): Display the input image as if
on a 24”W monitor of 16:9 aspect ratio.
•
27”W (16:9): Displays the input image as if
on a 27”W monitor of 16:9 aspect ratio.
Note: This option is not compatible with FreeSync and
PIP/ PBP functions.
Overdrive Improve the response time of the LCD monitor.
Adaptive Sync When this function is enabled, it eliminates the
screen lag and tearing while playing games.
LCD Monitor User's Manual
- 34 -
Picture
Congure the image related settings.
Exit
Move/Adjust
Enter/Conrm
Gaming
Picture
Display
PIP/PBP
System
Reset All
Brightness
Contrast
Color Vibrance
Sharpness
Gamma
Color Temperature
Low Blue Light
Arcade
Standard
FPS
RTS/RPG
Movie
Reader
sRGB
Picture Mode Standard
Brightness Contrast Sharpness Gamma Color Temperature
80 50 5 Gamma 3 User Dene
SDR
Save Settings
Item Description
Standard For editing documents or browsing websites.
Arcade For playing Arcade games.
FPS For playing FPS (First Person Shooting) games.
RTS/RPG For playing RTS (Real-Time Strategy) or RPG (Role-
Playing Game) games.
Movie For watching movies.
Reader For viewing documents.
sRGB For viewing photos and graphics on the computer.
Custom 1 Customized picture mode settings.
Custom 2 Customized picture mode settings.
Custom 3 Customized picture mode settings.
Green For saving energy and low power consumption.
Note: Picture mode “Standard”, Low blue light “Level 10” is the optimized set-
ting in compliance with TUV Low Blue Light Certication”.
LCD Monitor User's Manual
- 35 -
Exit
Move/Adjust
Enter/Conrm
Gaming
Picture
Display
PIP/PBP
System
Reset All
Brightness
Contrast
Dark Enhance
Color Enhance
Light Enhance
Local Dimming
Reset Picture
HDR Game
HDR 600
HDR Movie
Picture Mode Standard
Brightness Contrast Sharpness Gamma Color Temperature
80 50 5 Gamma ST2084 User Dene
HDR
Save Settings
Item Description
HDR 600 Brightness: Adjust the brightness of the image.
Contrast: Adjust the contrast of the image.
Dark Enhance: Enhance the Darkness performance.
Color Enhance: Enhance the Color performance.
Light Enhance: Enhance the Brightness performance.
Local Dimming: Improve the blackness of images
displayed on the monitor.
Reset Picture: Reset all Picture settings to the default
settings.
HDR Game
HDR Movie
LCD Monitor User's Manual
- 36 -
Display
Congure the display screen related settings.
Exit
Move/Adjust
Gaming
Enter/Conrm
Picture
Display
PIP/PBP
System
Reset All
Input
KVM
HDR
DisplayPort
Type-C
HDMI 1
HDMI 2
Picture Mode Standard
Brightness Contrast Sharpness Gamma Color Temperature
80 50 5 Gamma 3 Normal
Save Settings
SDR
RGB Range
Overscan
Overclock
Item Description
Input Select the input source.
Overclock Enable to apply higher refresh rate.
Note:
•
When Overclocking is enabled. The monitor may
result in icker or other adverse eects that may
derive from the total conguration of the system
and possibly the display’s panel specications. It is
possible to reduce such eects by setting a lower
refresh rate.
KVM Congure the KVM related settings.
•
KVM Switch: Switch the input source that has been
assigned to USB-B or Type-C connection in the KVM
Wizard settings.
•
KVM Wizard: Set the input source to be bound with
USB Type-B connection and USB Type-C connection.
•
KVM Reset: Restore the KVM default settings.
HDR Enable/Disable the HDR function.
Note:
•
This option is only available for HDMI input.
RGB Range Select an appropriate RGB range setting or let the
monitor to detect it automatically.
Overscan When this function is enabled, it slightly enlarges the
input image to hide the outermost edges of the image.
LCD Monitor User's Manual
- 37 -
PIP/PBP
Congure the multi-picture related settings.
Exit
Move/Adjust
Gaming
Enter/Conrm
Picture
Display
PIP/PBP
System
Source
USB Control
PBP Size
Display Switch
Audio Switch
Reset All
OFF
PIP
PBP
Picture Mode Standard
Brightness Contrast Sharpness Gamma Color Temperature
80 50 5 Gamma 3 User Dene
Save Settings
SDR
Item Description
OFF Disable the PIP/PBP function.
PIP Split the screen into 2 parts (main window and inset window).
• Source: Change the input source for the inset window.
• USB Control: Select the control source from USB-B or
Type-C.
• PIP Size: Adjust the inset window size.
• Location: Move the inset window position.
• Display Switch: Swap the two windows.
• Audio Switch: Select which audio source you want to hear
the sound from.
PBP Display 1x1 split screen (left and right windows).
• Source: Change the input source for the right window.
• USB Control: Select the control source from USB-B or
Type-C.
• PBP Size: Select the aspect ratio of the windows.
• Display Switch: Swap the two windows.
• Audio Switch: Select which audio source you want to hear
the sound from.
LCD Monitor User's Manual
- 38 -
System
Congure the system related settings.
Exit
Move/Adjust
Gaming
Enter/Conrm
Picture
Display
PIP/PBP
System
Reset All
RGB LED
Language
Audio
Quick Switch
OSD Setting
Other Settings
Picture Mode Standard
Brightness Contrast Sharpness Gamma Color Temperature
80 50 5 Gamma 3 User Dene
SDR
Save Settings
Item Description
Language Select the OSD language.
RGB LED Select the preset LED patterns to be displayed on the
rear of monitor.
Audio Congure the audio related settings.
• Volume(Line out): Adjust the volume level for 3.5mm
jack.
• Volume(ESS USB): Adjust the volume level for ESS
USB input. Note: Set the input source to be bound
with USB Type-B connection.
• Mute: Enable/Disable the mute function.
• 600R: For high impedance device (>600 ohm), turn
on this option to have better sound quality.
OSD Settings Congure the on-screen display (OSD) menu related
settings.
• Display Time: Set the length of time the OSD
menu remains on the screen.
• OSD Transparency: Adjust the OSD menu
transparency.
LCD Monitor User's Manual
- 39 -
Item Description
OSD Settings
(continue)
• OSD Lock: When this function is enabled, no OSD
adjustment is allowed.
Note: To disable the OSD lock function, press the Control
key. When the message appears on the screen, select Yes
to conrm.
The button is locked,
confirm to unlock OSD.
No Yes
Quick SwitchAssign the function of the hot keys.
Available options: Aim Stabilizer, Black Equalizer, Low
Blue Light,
Volume, Input, Contrast, Brightness, and Picture Mode.
The default setting of the hot keys as below:
Up
( )
: Black Equalizer
Down ( ): Picture Mode
Right
( )
: Input
Left
( ): Volume
Other Settings• Resolution Notice: When this function is enabled,
the current resolution message will appear on the
screen when the monitor switches to another input
source.
• Input Auto Switch: When this function is enabled, it
automatically switches to an available input source.
• Auto Power O: When this function is enabled,
the monitor will automatically turn o after a
certain amount of time.
LCD Monitor User's Manual
- 40 -
Item Description
Other Settings
(continue)
• LED Indicator: By default, the LED indicator is set
to ON.
Always ON: The Power LED lights white during
operation and lights on and o in standby
mode(with 1 sec interval).
Always OFF: Turn o the Power LED.
Standby ON: The Power LED remains o during
operation and lights on and o in standby
mode(with 1 sec interval).
When the power supply is switched o, the
Power LED will remain o.
• HDMI 2.1 Support: Set the HDMI version to 2.1 or 2.0.
• Type-C DSC: Compat with device which support
DSC when turn this option into ON.
Note:
•
Make sure to congure this option based on the
DisplayPort version supported by your graphics
card.
LCD Monitor User's Manual
- 41 -
Save Settings
Save all data.
Exit
Move/Adjust
Gaming
Enter/Conrm
Picture
Display
PIP/PBP
System
Reset All
Setting1
Setting2
Setting3
Picture Mode Standard
Brightness Contrast Sharpness Gamma Color Temperature
80 50 5 Gamma 3 Normal
SDR
Save Settings
Item Description
Setting1 After selecting, the Save and Load menu will appear for the
player to choose.
Setting2 After selecting, the Save and Load menu will appear for the
player to choose.
Setting3 After selecting, the Save and Load menu will appear for the
player to choose.
LCD Monitor User's Manual
- 42 -
Reset All
Restore the monitor to its factory default settings.
Exit
Move/Adjust
Enter/Conrm
Gaming
Picture
Display
PIP/PBP
System
Reset All
Picture Mode Standard
Brightness Contrast Sharpness Gamma Color Temperature
80 50 5 Gamma 3 Normal
SDR
Save Settings
LCD Monitor User's Manual
- 43 -
APPENDICES
Specications
Item Specications
Panel Size 32-inch
Aspect Ratio 16:9
Resolution 2560 x 1440
LED Life 30000 hours (min.)
Pixel Pitch 0.276 x 0.276
Brightness 400 nits (typ.)
Contrast Ratio 1000:1 (typ.)
Color Depth 16.7M ( 8Bit)
Active Display
area
708.48(H) x 398.52(V)
Viewing Angle 178°(H)/178°(V)
Input/Output
Terminals
• 2x HDMI 2.1
• 1x DP 1.4 (w/DSC)
• 1x Headphone
• 1x Microphone
• 1x Type-C (5V/3A,
9V/2A, 12V/1.5A,
15V/1A)
• 2x USB 3.0
(downstream),
support BC 1.2
charging
(5V/1.5A)
• 1x USB upstream
• 1x Line Out
Power Supply AC 100 ~ 240V at 50/60Hz
Power
Consumptions
• On: 160W (Max.)
• Standby: 0.5W
• O: 0.3W
Dimensions with
Stand
(W x H x D)
729.1 x 596.7 x 293mm(highest)
729.1 x 466.7 x 293mm(lowest)
Weight 10.28kg (Net)
Note: Specications subject to change without notice.
LCD Monitor User's Manual
- 44 -
Supported Timing List
Port Port Port
HDMI
2.0
640x480@60Hz HDMI
2.1
640x480@60Hz DP
(Type-C)
640x480@60Hz
640x480@75Hz 640x480@75Hz 640x480@75Hz
720x480@60Hz 720x480@60Hz 720x480@60Hz
720x576P@50Hz 720x576P@50Hz 720x576P@50Hz
800x600@60Hz 800x600@60Hz 800x600@60Hz
800x600@75Hz 800x600@75Hz 800x600@75Hz
1024x768@60Hz 1024x768@60Hz 1024x768@60Hz
1024x768@75Hz 1024x768@75Hz 1024x768@75Hz
1280x720@60Hz 1280x720@60Hz 1280x720@60Hz
1280x720@100Hz 1280x720@100Hz 1280x720@100Hz
1280x720@120Hz 1280x720@120Hz 1280x720@120Hz
1920x1080@60Hz 1920x1080@60Hz 1920x1080@60Hz
1920x1080@120Hz 1920x1080@120Hz 1920x1080@120Hz
1920x1080@144Hz 1920x1080@144Hz 1920x1080@165Hz
3840x2160@24Hz 2560x1440@60Hz 2560x1440@60Hz
2560x1440@60Hz 2560x1440@120Hz 2560x1440@120Hz
2560x1440@120Hz 2560x1440@144Hz 2560x1440@144Hz
2560x1440@144Hz 2560x1440@200Hz 2560x1440@165Hz
3840x2160@24Hz 2560x1440@240Hz 2560x1440@200Hz
3840x2160@60Hz 3840x2160@24Hz 2560x1440@240Hz
3840x2160@60Hz 3840x2160@60Hz
3840x2160@120Hz 3840x2160@120Hz
3840x2160@144Hz 3840x2160@144Hz
2560x1440@270Hz
LCD Monitor User's Manual
- 45 -
Troubleshooting
Problem Possible Solution(s)
No power • Make sure the power cable is properly
connected to the power source and the
monitor.
• Check the cable and plug to make sure they are
not broken.
• Make sure the monitor is turned on.
No image
appears on the
screen
• Make sure the monitor and the computer are
properly connected and both devices are turned
on.
• Make sure you have selected the correct
input source. Refer to page 25 or page
36 .
The image
does not ll
the entire
screen
•
Try dierent Display Mode (aspect ratio)
setting. Refer to page 33 .
The colors are
distorted
• Make sure the input signal cable is properly
connected.
• Congure the image related settings. Refer to the
“Picture” section.
No sound or
volume is low
• Make sure the headphone cable is properly
connected.
• Adjust the volume level. Refer to page 27
orpage 38 .
• Check the Audio Source setting. If the setting
is set to USB Codec, make sure the USB cable
is properly connected to the monitor and
your computer. Refer to page page 38 .
• Adjust your computer sound related settings.
Note: If the problem persists, please contact our customer service for further
assistance.
LCD Monitor User's Manual
- 46 -
Basic Care
When the screen becomes dirty, do the following to clean the screen:
• Wipe the screen with your soft, lint-free cloth to remove any residual
dust.
• Spray or apply the cleaning uid onto a soft cloth. Then wipe the
screen gently with the damp cloth.
Note:
• Make sure that the cloth is damp, but not wet.
• When wiping, avoid applying excessive pressure on the screen.
• Acidic or abrasive cleaners can damage the screen.
Notes on USB Charging
The following devices are not compatible with BC 1.2 of CDP mode.
When the Hub is connected to a PC, these devices cannot be charged
using the USB cable.
Vendor Device PID/VID
Apple IPad PID_129A/VID_05AC
Samsung Galaxy Tab2 10.1 PID_6860/VID_04E8
Samsung GALAXY TabPro PID_6860/VID_04E8
GIGABYTE Service Information
More service information, please visit GIGABYTE ocial website:
https://www.gigabyte.com/
LCD Monitor User's Manual
- 47 -
SAFETY INFORMATION
Regulatory Notices
United States of America, Federal Communications Commission
Statement
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Product Name: LCD monitor
Trade Name: GIGABYTE
Model Number: AORUS FI32Q X
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information:
https://www.gigabyte.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B,
Unintentional Radiators.
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause
harmful interference to radio communications. However, there is no
LCD Monitor User's Manual
- 48 -
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications. This class
B digital apparatus complies with Canadian ICES-003.
Avis de conformité à la réglementation d’Industrie Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic
Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/
EU, ErP Directive 2009/125/EC, RoHS directive (recast) 2011/65/EU & the
2015/863 Statement.
This product has been tested and found to comply with all essential
requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU &
the European Commission Delegated Directive (EU) 2015/863
Statement
GIGABYTE products have not intended to add and safe from hazardous
substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP).
The parts and components have been carefully selected to meet RoHS
requirement. Moreover, we at GIGABYTE are continuing our eorts to
develop products that do not use internationally banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic
LCD Monitor User's Manual
- 49 -
Equipment (WEEE) Directive Statement
GIGABYTE will fulll the national laws as interpreted from the 2012/19/
EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive.
The WEEE Directive species the treatment, collection, recycling and
disposal of electric and electronic devices and their components. Under
the Directive, used equipment must be marked, collected separately, and
disposed of properly.
WEEE Symbol Statement
The symbol shown below is on the product or on its
packaging, which indicates that this product must not be
disposed of with other waste. Instead, the device should
be taken to the waste collection centers for activation
of the treatment, collection, recycling and disposal
procedure..
For more information about where you can drop o your waste
equipment for recycling, please contact your local government oce,
your household waste disposal service or where you purchased the
product for details of environmentally safe recycling.
End of Life Directives-Recycling
The symbol shown below is on the product or on its
packaging, which indicates that this product must not
be disposed of with other waste. Instead, the device
should be taken to the waste collection centers for
activation of the treatment, collection, recycling and
disposal procedure.
Déclaration de Conformité aux Directives de l’Union
européenne (UE)
Cet appareil portant la marque CE est conforme aux directives de l’UE
suivantes: directive Compatibilité Electromagnétique 2014/30/UE,
directive Basse Tension 2014/35/UE, directive 2009/125/CE en matière
d’écoconception, la directive RoHS II 2011/65/UE & la déclaration
2015/863.
La conformité à ces directives est évaluée sur la base des normes
LCD Monitor User's Manual
- 50 -
européennes
harmonisées applicables.
European Union (EU) CE-Konformitätserklärung
Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU-
Richtlinien: EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie
2014/30/EU, Ökodesign-Richtlinie 2009/125/EC, RoHS-Richtlinie 2011/65/
EU erfüllt und die 2015/863 Erklärung.
Die Konformität mit diesen Richtlinien wird unter Verwendung der
entsprechenden Standards zurEuropäischen Normierung beurteilt.
CE declaração de conformidade
Este produto com a marcação CE estão em conformidade com das
seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/EU; Diretiva CEM
2014/30/EU; Diretiva Conceção Ecológica 2009/125/CE; Diretiva RSP
2011/65/UE e a declaração 2015/863.
A conformidade com estas diretivas é verificada utilizando as normas
europeias harmonizadas.
CE Declaración de conformidad
Este producto que llevan la marca CE cumplen con las siguientes
Directivas de la Unión Europea: Directiva EMC 2014/30/EU, Directiva de
bajo voltaje 2014/35/EU, Directiva de Ecodiseño 2009/125/EC, Directiva
RoHS 2011/65/EU y la Declaración 2015/863.
El cumplimiento de estas directivas se evalúa mediante las normas
europeas armonizadas.
Deklaracja zgodności UE Unii Europejskiej
Urządzenie jest zgodne z następującymi dyrektywami: Dyrektywa
kompatybilności elektromagnetycznej 2014/30/UE, Dyrektywa
niskonapięciowej 2014/35/UE, Dyrektywa ErP 2009/125/WE, Dyrektywa
RoHS 2011/65/UE i dyrektywa2015/863.
Niniejsze urządzenie zostało poddane testom i stwierdzono jego
zgodność z wymaganiami dyrektywy.
ES Prohlášení o shodě
Toto zařízení splňuje požadavky Směrnice o Elektromagnetické
kompatibilitě 2014/30/EU, Směrnice o Nízkém napětí 2014/35/EU,
LCD Monitor User's Manual
- 51 -
Směrnice ErP 2009/125/ES, Směrnice RoHS 2011/65/EU a 2015/863.
Tento produkt byl testován a bylo shledáno, že splňuje všechny základní
požadavky směrnic.
EK megfelelőségi nyilatkozata
A termék megfelelnek az alábbi irányelvek és szabványok
követelményeinek, azok a kiállításidőpontjában érvényes, aktuális
változatában: EMC irányelv 2014/30/EU, Kisfeszültségű villamos
berendezésekre vonatkozó irányelv2014/35/EU, Környezetbarát
tervezésről szóló irányelv 2009/125/EK, RoHS irányelv 2011/65/EU és
2015/863.
Δήλωση συμμόρφωσης ΕΕ
Είναι σε συμμόρφωση με τις διατάξεις των παρακάτω Οδηγιών
της Ευρωπαϊκής Κοινότητας: Οδηγία 2014/30/ΕΕ σχετικά με την
ηλεκτρομαγνητική συμβατότητα, Οοδηγία χαμηλή τάση 2014/35/EU,
Οδηγία 2009/125/ΕΚ σχετικά με τον οικολογικό σχεδιασμό, Οδηγία RoHS
2011/65/ΕΕ και 2015/863.
Η συμμόρφωση με αυτές τις οδηγίες αξιολογείται χρησιμοποιώντας τα
ισχύοντα εναρμονισμένα ευρωπαϊκά πρότυπα.
Japan Class 01 Equipment Statement
安全にご使用いただくために
接地接続は必ず電源プラグを電源につなぐ前に行って下さい。
また、接地接続を外す場合は、必ず電源プラグを電源から切り離してから行って
下さい。
Japan VCCI Class B Statement
クラス B VCCI 基準について
この装置は、クラス B 情報技術装置です。この装置は、家庭環境で使用すること
を目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用
されると、受信障害を引き起こすことがあります。
取扱説明書に従って正しい取り扱いをして下さい。
VCCI-B
LCD Monitor User's Manual
- 52 -
China RoHS Compliance Statement
中国《废弃电器电子产品回收处理管理条例》提示性说明
为了更好地关爱及保护地球，当用户不再需要此产品或产品寿命终
止时，请遵守国家废弃电器电子产品回收处理相关法律法规，将其
交给当地具有国家认可的回收处理资质的厂商进行回收处理。
环保使用期限
Environment-friendly use period
10
此标识指期限（十年），电子电气产品中含有的有
害物质在正常使用的条件下不会发生外泄或突变，
电子电气产品用户使用该电子电气产品不会对环境
造成严重污染或对其人身、财产造成严重损害的期
限。
产品中有害物质名称及含量 :
部件名称
有害物质
铅
(Pb)
汞
(Hg)
汞
(Hg)
六价铬
(Cr+6)
多溴联苯
(PBB)
多溴二苯
醚
(PBDE)
印刷电路板及其
电子组件 X ○ ○ ○ ○ ○
液晶面板 X ○ ○ ○ ○ ○
外壳 ○ ○ ○ ○ ○ ○
外部信号连接头
及线材 X ○ ○ ○ ○ ○
本表格依据 SJ/T 11364 的规定编制。
This table is prepared in compliance with the requirements of SJ/T 11364
○ : 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定
的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572
规定的限量要求。
LCD Monitor User's Manual
- 53 -
限用物質含有情況標示聲明書
Declaration of the Presence Condition of the Restricted
Substances Marking
設備名稱：液晶顯示器 型號（型式）：AORUS FI32Q X
Equipment name Type designation (Type)
單元
Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyls ethers
(PBDE)
塑料外框 ○ ○ ○ ○ ○ ○
後殼 ○ ○ ○ ○ ○ ○
液晶面板 － ○ ○ ○ ○ ○
電路板組
件－ ○ ○ ○ ○ ○
底座 ○ ○ ○ ○ ○ ○
電源線 － ○ ○ ○ ○ ○
其他線材 － ○ ○ ○ ○ ○
備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比
含量基準值。
Note 1：〝Exceeding 0.1 wt %〞 and 〝exceeding 0.01 wt %〞 indicate that the percentage
content of the restricted substance exceeds the reference percentage value of presence
condition.
備考 2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2：〝○〞 indicates that the percentage content of the restricted substance does not
exceed the percentage of reference value of presence.
備考 3.〝－〞係指該項限用物質為排除項目。
Note 3：The 〝－〞 indicates that the restricted substance corresponds to the exemption