Gigabyte GC-TITAN RIDGE User Manual
Displayed below is the user manual for GC-TITAN RIDGE by Gigabyte which is a product in the Interface Cards/Adapters category. This manual has pages.
Related Manuals
GC-TITAN RIDGE 2.0
Installation Guide/安裝指南/安装指南
12WE6-TITAR2-00AR
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product
are recyclable and reusable. GIGABYTE works with you to protect the environment.
- 2 -
Chip Intel® DSL7540 Thunderbolt™ 3 Controller
Back Panel
Connectors
1 x DisplayPort, supporting a maximum resolution of 8K
(7680x3840)@60 Hz (Note 1) (Note 2)
* Support for DisplayPort 1.4 version, HDCP 2.2, and HDR.
2 x Thunderbolt
™
3 out ports (Thunderbolt
™
3 Port 1/Thunderbolt
™
3 Port 2), supporting up to 40 Gbps bandwidth and a maximum
display resolution of 8K (7680x3840)@60 Hz
(Note 1) (Note 2)
2 x Mini-DisplayPort In ports (DP_IN1/DP_IN2)
Internal
Connectors
2 x 6-pin PCIe power connectors
1 x USB 2.0/1.1 header
1 x 5-pin Thunderbolt™ header
1 x 3-pin Thunderbolt™ header
Interface PCIe 3.0 interface (PCIe x4)
Data Transfer
Rate 40 Gbps Bi-directional per port
Supported
Operating Systems
Support for Windows 10 (64-bit) with RS3 or later
Compatible
Motherboards
Go to GIGABYTE’s website for the latest motherboard support list.
Product Specication
(Note 1) Actual resolutions supported are dependent on the graphics card being used.
(Note 2) Due to hardware limitations, the DisplayPort connector, Thunderbolt™ 3 connector 1, and
Thunderbolt™ 3 connector 2 require signal input from external devices and support up to
two display outputs at a time.
- 3 -
晶片 Intel® DSL7540 Thunderbolt™ 3 控制器
後方面板裝置
連接插座
1個DisplayPort輸出插座，可支援至最高8K(7680 x 3840)@60 Hz
的解析度
(註一)(註二)
* 支援DisplayPort 1.4版本、HDCP 2.2及HDR。
2個Thunderbolt™ 3輸出插座(Thunderbolt™ 3插座1/Thunder-
bolt™ 3插座2)，最高可支援40 Gbps傳輸速度，螢幕可支援
至最高8K(7680 x 3840)@60 Hz的解析度
(註一)(註二)
2個Mini-DisplayPort輸入插座(DP_IN1/DP_IN2)
內接插座 2個6-pin PCIe電源插座
1個USB 2.0/1.1插座
1個5-pin Thunderbolt™ 插座
1個3-pin Thunderbolt™ 插座
介面 PCIe 3.0 介面(PCIe x4)
資料傳輸速度 每埠可支援至最高40 Gbps雙向傳輸速度
支援作業系統 支援Windows 10 (64-bit) RS3(含)以上版本
可相容主機板 請至技嘉網站查詢有關支援的主機板列表
產品規格
(註一) 實際所支援的解析度會依您所使用的顯示卡而有不同。
(註二) 由於硬體限制，DisplayPort插座、Thunderbolt™ 3插座1和Thunderbolt™ 3插座2 需要
外部輸入訊號，並且同時只支援兩個顯示輸出。
- 4 -
芯片 Intel® DSL7540 Thunderbolt™ 3 控制器
后方面板设
备连接插座
1个DisplayPort输出插座，可支持至最高8K(7680 x 3840)@60 Hz的
分辨率
(注一)(注二)
*
支持DisplayPort 1.4版本、HDCP 2.2及HDR。
2个Thunderbolt™ 3输出插座(Thunderbolt™ 3插座1/Thunderbolt™
3插座2)，最高可支持40 Gbps传输速度，屏幕可支持至最高
8K(7680 x 3840)@60 Hz的分辨率(注一)(注二)
2个Mini-DisplayPort输入插座(DP_IN1/DP_IN2)
内接插座 2个6-pin PCIe电源插座
1个USB 2.0插座
1个5-pin Thunderbolt™ 插座
1个3-pin Thunderbolt™ 插座
界面 PCIe 3.0 界面(PCIe x4)
数据传输速度 每个接口可支持至最高40 Gbps双向传输速度
支持操作系统 支持Windows 10 (64-bit) RS3(含)以上版本
可兼容主板 请至技嘉网站查询有关支持的主板列表
产品规格
(注一) 实际所支持的分辨率会依您所使用的显卡而有不同。
(注二) 由于硬件限制，DisplayPort插座、Thunderbolt™ 3插座1和Thunderbolt™ 3插座2 需要外部输
入信号，并且同时只支持两个显示输出。
- 5 -
5-pin Thunderbolt™ header
5-pin Thunderbolt™ 插座
5-pin Thunderbolt™ 插座
PCIe x4 Interface
PCIe x4 介面
PCIe x4 界面
Thunderbolt™ 3 Port 1
Thunderbolt™ 3插座1
Thunderbolt™ 3插座1
Thunderbolt™ 3 Port 2
Thunderbolt™ 3插座2
Thunderbolt™ 3插座2
Mini-DisplayPort In Port 2 (DP IN 2)
Mini-DisplayPort In插座2 (DP IN 2)
Mini-DisplayPort In插座2 (DP IN 2)
Mini-DisplayPort In Port 1 (DP IN 1)
Mini-DisplayPort In插座1 (DP IN 1)
Mini-DisplayPort In插座1 (DP IN 1)
DisplayPort
DisplayPort插座
DisplayPort插座
PCIe Power Connector
PCIe電源插座
PCIe电源插座
USB Connector
USB連接埠插座
USB接口插座
Installing the GC-TITAN RIDGE 2.0 Add-in Card
安裝GC-TITAN RIDGE 2.0卡 • 安装GC-TITAN RIDGE 2.0卡
3-pin Thunderbolt™ header
3-pin Thunderbolt™ 插座
3-pin Thunderbolt™ 插座
- 6 -
Thunderbolt™ Header Cable (5-pin) x 1
Thunderbolt™ 插座連接線 (5-pin)-1條
Thunderbolt™ 插座连接线 (5-pin)-1条
Mini-DisplayPort Cable x 2
Mini-DisplayPort連接線-2條
Mini-DisplayPort连接线-2条
USB 2.0/1.1 Header Cable x 1
USB 2.0/1.1插座連接線-1條
USB 2.0插座连接线-1条
Thunderbolt™ Header Cable (3-pin) x 1
Thunderbolt™ 插座連接線 (3-pin)-1條
Thunderbolt™ 插座连接线 (3-pin)-1条
- 7 -
Step 1:
Install the GC-TITAN RIDGE 2.0 add-in card in the PCIEX4 slot.
步驟1：
將GC-TITAN RIDGE 2.0卡安裝至PCIEX4插槽。
步骤1：
将GC-TITAN RIDGE 2.0卡安装至PCIEX4插槽。
Step 2:
Connect one end of the USB cable to the USB connector on the
GC-TITAN RIDGE 2.0 card.
步驟2：
將USB排線的一端接至GC-TITAN RIDGE 2.0卡的USB連
接埠插座。
步骤2：
将USB扁平电缆的一端接至GC-TITAN RIDGE 2.0卡的USB
接口插座。
Step 3:
Connect the other end of the USB cable to the F_USB connector
on the motherboard.
步驟3：
再將USB排線的另一端接至主機板的F_USB插座。
步骤3：
再将USB扁平电缆的另一端接至主板的F_USB插座。
- 8 -
(Note 1) The Thunderbolt™ header cable (5-pin) provided
has two connectors. Choose the correct connector
according to the Thunderbolt™ add-in card header on
your motherboard.
(註一) 隨貨附贈的Thunderbolt™ 插座連接線 (5-pin)提供
兩種接頭，請依主機板上的Thunderbolt™擴充子
卡插座選擇接頭類型。
(注一) 随货附赠的Thunderbolt™插座连接线 (5-pin)提供两种
接口，请依主板上的Thunderbolt™扩展子卡插座选择
接口类型。
Step 5:
Connect the other end of the cable to the Thunderbolt™ add-in
card header (Note 1) on the motherboard.
步驟5：
將另一端連接至主機板上的Thunderbolt™擴充子卡插
座(註一)。
步骤5：
将另一端连接至主板上的Thunderbolt™扩展子卡插座(注一)。
Step 4:
Connect one end of the Thunderbolt™ header cable (5-pin) to
the 5-pin Thunderbolt™ header on the GC-TITAN RIDGE 2.0
add-in card.
步驟4：
將Thunderbolt™插座連接線 (5-pin)的一端連接至GC-TITAN
RIDGE 2.0卡上的5-pin Thunderbolt™插座。
步骤4：
将Thunderbolt™ 插座连接线 (5-pin)的一端连接至GC-TITAN
RIDGE 2.0卡上的5-pin Thunderbolt™插座。
- 9 -
(Note 2) Whether the connector is supported depends on the motherboard models.
(註二) 是否支援此插座依主機板而定。
(注二) 是否支持此插座依据主板而定。
Step 7:
Connect the other end of the cable to the Thunderbolt™ add-in
card header (Note 2) on the motherboard.
步驟7：
將另一端連接至主機板上的Thunderbolt™擴充子卡插
座(註二)。
步骤7：
将另一端连接至主板上的Thunderbolt™扩展子卡插座(注二)。
Step 6:
Connect one end of the Thunderbolt™ header cable (3-pin) to
the 3-pin Thunderbolt™ header on the GC-TITAN RIDGE 2.0
add-in card.
步驟6：
將Thunderbolt™插座連接線 (3-pin)的一端連接至GC-TITAN
RIDGE 2.0卡上的3-pin Thunderbolt™插座。
步骤6：
将Thunderbolt™插座连接线 (3-pin)的一端连接至GC-TITAN
RIDGE 2.0卡上的3-pin Thunderbolt™插座。
- 10 -
Step 9:
Follow the steps below to use the included Mini-
DisplayPort cable to connect your graphics card to the
GC-TITAN RIDGE 2.0 add-in card.
9-1: Connect the cable from the DisplayPort In connector
on the GC-TITAN RIDGE 2.0 add-in card to the
DisplayPort on your graphics card.
9-2: Connect the Thunderbolt™ device’s or DisplayPort
monitor’s cable to the Thunderbolt™ 3 connector on
the GC-TITAN RIDGE 2.0 add-in card.
9-2
9-1
Step 8:
Connect the power cables from the power supply to the
two PCIe connectors.
步驟8：
將電源供應器上的電源接頭連接至兩組PCIe電
源插座。
步骤8：
将电源供应器上的电源接头连接至两组PCIe电源
插座。
步驟9：
請依照下列步驟使用所附的Mini-DisplayPort連接線將您的顯示卡與GC-TITAN RIDGE 2.0
卡做連結。
9-1：GC-TITAN RIDGE 2.0卡上的Mini-DisplayPort In插座需連結至顯示卡的DisplayPort。
9-2： GC-TITAN RIDGE 2.0卡上的Thunderbolt™ 3插座則需連結至Thunderbolt™裝置或
DisplayPort螢幕。
- 11 -
•When connecting DisplayPort monitor, if you connect the Mini-DisplayPort cable to the
DP IN 1 connector, you must connect the monitor’s cable to the DisplayPort connector or
Thunderbolt™ 3 connector 1. If you connect the cable to the DP IN 2 connector, you must
connect the monitor’s cable to Thunderbolt 3 connector 2.
•連接DisplayPort螢幕時，如果您是將連接線連接至DP IN 1插座，您就必須將
螢幕連接線接至DisplayPort或Thunderbolt™ 3插座1；若是連接至DP IN 2，就必
須將螢幕連接線接至Thunderbolt™ 3插座2。
•连接DisplayPort显示器时，如果您是将连接线连接至DP IN 1插座，您就必须将显示器
连接线接至DisplayPort或Thunderbolt
™
3插座1；若是连接至DP IN 2，就必须将显示器连
接线接至Thunderbolt
™
3插座2。
•Make sure to update the motherboard BIOS to the latest version.
•請確認您主機板的BIOS為最新版本。
•请确认您主板的BIOS为最新版本。
步骤9：
请依照下列步骤使用所附的Mini-DisplayPort连接线将您的显卡与GC-TITAN RIDGE 2.0卡做连接。
9-1：GC-TITAN RIDGE 2.0卡上的Mini-DisplayPort In插座需链接至显卡的DisplayPort。
9-2： GC-TITAN RIDGE 2.0卡上的Thunderbolt™ 3插座则需链接至Thunderbolt™设备或DisplayPort
屏幕。
- 12 -
Six Thunderbolt™ devices
6台Thunderbolt™裝置
6台Thunderbolt™设备
Six Thunderbolt™ devices and one native DisplayPort monitor
(A graphics card with DisplayPort is required)
6台Thunderbolt™裝置及1台原生DisplayPort螢幕
(需搭配支援DisplayPort的顯示卡)
6台Thunderbolt™设备及1台原生DisplayPort屏幕
(需搭配支持DisplayPort的显卡)
Daisy-chaining Thunderbolt™ Enabled Devices•串接Thunderbolt™ 裝置•
串接Thunderbolt™
Refer to the following for connecting Thunderbolt™-enabled devices in a daisy-chaining conguration. The
following are single-port congurations. (Make sure the Thunderbolt™-enabled devices to be daisy-chained
have both Thunderbolt™ in and out ports.)
若要以菊鏈式串接方式串連Thunderbolt™裝置，請參考下列說明。以下為單一連接埠的
串接示意圖。(請先確認要串接的裝置皆具備Thunderbolt™輸出及輸入插座。)
若要以菊链式串接方式串连Thunderbolt™设备，请参考下列说明。以下为单一接口的串接示
意图。(请先确认要串接的设备皆具备Thunderbolt™输出及输入插座。)
- 13 -
Installing the Driver•安裝驅動程式•安装驱动程序
After the computer starts, install the driver for the GC-TITAN RIDGE 2.0 add-in card. Insert the
included driver disc and follow the on-screen instructions to install the driver.
電腦重新開機後，請安裝GC-TITAN RIDGE 2.0的驅動程式。將所附的驅動程式光
碟片插入並且依螢幕指示完成驅動程式的安裝。
电脑重新启动后，请安装GC-TITAN RIDGE 2.0的驱动程序。将所附的驱动程序光盘插
入并且依屏幕指示完成驱动程序的安装。
Please visit GIGABYTE’s global website (http://www.gigabyte.com) and click on
Support & Downloads for the latest software driver.
請至技嘉網站(http://www.gigabyte.tw)點選「支援與下載」查詢最新版的驅動程式。
请至技嘉网站(http://www.gigabyte.com)点选「支持与下载」查询最新版的驱动程序。
Six Thunderbolt™ devices and three DisplayPort monitors
(A graphics card with DisplayPort support is required)
6台Thunderbolt™裝置及3台DisplayPort規格螢幕
(需搭配支援DisplayPort 規格的顯示卡)
6台Thunderbolt™设备及3台DisplayPort规格屏幕
(需搭配支持DisplayPort规格的显卡)
Regulatory Notices
United States of America, Federal Communications Commission Statement
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Product Name: PCIe add in card
Trade Name: GIGABYTE
Model Number: GC-TITAN RIDGE 2.0
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information: https://www.gigabyte.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufac-
turer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Inter-
ference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-
003.
Avis de conformité à la réglementation d’Industrie Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage Directive
2014/35/EU, ErP Directive 2009/125/EC, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement. This product has been
tested and found to comply with all essential requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU & the European Commission Delegated Directive (EU) 2015/863
Statement
GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP,
DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE
are continuing our efforts to develop products that do not use internationally banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE) Directive Statement
GIGABYTE will fulll the national laws as interpreted from the 2012/19/EU WEEE (Waste Electrical and Electronic Equipment) (recast)
directive. The WEEE Directive species the treatment, collection, recycling and disposal of electric and electronic devices and their
components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly.
WEEE Symbol Statement
The symbol shown below is on the product or on its packaging, which indicates that this product must not be
disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the
treatment, collection, recycling and disposal procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your local
government office, your household waste disposal service or where you purchased the product for details of
environmentally safe recycling.
End of Life Directives-Recycling
The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed
of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment,
collection, recycling and disposal procedure.
Déclaration de Conformité aux Directives de l'Union européenne (UE)
Cet appareil portant la marque CE est conforme aux directives de l’UE suivantes: directive Compatibilité Electromagnétique
2014/30/UE, directive Basse Tension 2014/35/UE, directive 2009/125/CE en matière d’écoconception, la directive RoHS II 2011/65/
UE & la déclaration 2015/863. La conformité à ces directives est évaluée sur la base des normes européennes harmonisées ap-
plicables.
European Union (EU) CE-Konformitätserklärung
Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU-Richtlinien: EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie
2014/30/EU, Ökodesign-Richtlinie 2009/125/EC, RoHS-Richtlinie 2011/65/EU erfüllt und die 2015/863 Erklärung. Die Konformität
mit diesen Richtlinien wird unter Verwendung der entsprechenden Standards zurEuropäischen Normierung beurteilt.
CE declaração de conformidade
Este produto com a marcação CE estão em conformidade com das seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/EU;
Diretiva CEM 2014/30/EU; Diretiva Conceção Ecológica 2009/125/CE; Diretiva RSP 2011/65/UE e a declaração 2015/863. A con-
formidade com estas diretivas é vericada utilizando as normas europeias harmonizadas.
CE Declaración de conformidad
Este producto que llevan la marca CE cumplen con las siguientes Directivas de la Unión Europea: Directiva EMC (2014/30/EU), Di-
rectiva de bajo voltaje (2014/35/EU), Directiva de Ecodiseño (2009/125/EC), Directiva RoHS (recast) (2011/65/EU) y la Declaración
2015/863. El cumplimiento de estas directivas se evalúa mediante las normas europeas armonizadas.
Contact point for EU based customers
G.B.T. Technology Trading GmbH
Am Stadtrand 63, 22047 Hamburg, Germany
tel: +49-40-25 33 040
BSMI CNS15663 限用物質含有情況標示聲明書
Declaraon of the Presence Condion of the Restricted Substances Marking
設備名稱：PCIe add in card 型號（型式）：GC-TITAN RIDGE 2.0
Equipment name Type designaon (Type)
單元Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr
+6
)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
印刷電路板總成
PCB Assembly
－ ○ ○ ○ ○ ○
晶片
Chip
○ ○ ○ ○ ○ ○
外殻
Case
○ ○ ○ ○ ○ ○
線材
Cable
○ ○ ○ ○ ○ ○
連接器
Connector
○ ○ ○ ○ ○ ○
備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 係指限用物質之百分比含量超出百分比含量基準值。
Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the
restricted substance exceeds the reference percentage value of presence condion.
備考2. "○"係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the
percentage of reference value of presence.
備考3. "－"係指該項限用物質為排除項目。
Note 3: The "－" indicates that the restricted substance corresponds to the exempon.
China RoHS Compliance Statement
中国《废弃电器电子产品回收处理管理条例》提示性说明
为了更好地关爱及保护地球，当用户不再需要此产品或产品寿命终止时，请遵守国家废弃电器电子
产品回收处理相关法律法规，将其交给当地具有国家认可的回收处理资质的厂商进行回收处理。
环保使用期限
Environment-friendly use period
此标识指期限（十年），电子电气产品中含有的有害物质不会发生外泄或突变、
电子电气产品用户正常使用该电子电气产品不会对环境造成严重 污染或对其人
身、财产造成严重损害的期限。
产品中有害物质的名称及含量：
Hazardous Substances Table
部件名称(Parts)
有害物质(Hazardous Substances)
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr+6)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板总成
PCB Assembly × ○ ○ ○ ○ ○
芯片
Chip ○ ○ ○ ○ ○ ○
外壳
Case ○ ○ ○ ○ ○ ○
线材
Cable
○ ○ ○ ○ ○ ○
连接器
Connector
○ ○ ○ ○ ○ ○
These tables are prepared in accordance with the provisions of SJT 11364
本表格依据SJ/T 11364 的规定编制。
○： The content of such hazardous substance in all homogeneous materials of such component is below the
limit required by GB/T 26572.
表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
×： The content of such hazardous substance in a certain homogeneous material of such component is
beyond the limit required by GB/T 26572.
表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定的限量要求。
Contact Us
GIGA-BYTE TECHNOLOGY CO., LTD.
Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan
TEL: +886-2-8912-4000, FAX: +886-2-8912-4005
Tech. and Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com
WEB address (English): https://www.gigabyte.com
WEB address (Chinese): https://www.gigabyte.com/tw
Copyright
© 2020 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specications and features in this manual may be made by GIGABYTE without prior notice.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means
without GIGABYTE's prior written permission.
For product-related information, check on our website at:
https://www.gigabyte.com