Gigabyte MF51-ES0 User Manual

Displayed below is the user manual for MF51-ES0 by Gigabyte which is a product in the Motherboards category. This manual has pages.

Related Manuals

Gigabyte Radeon RX 6800 MASTER 16G Manual

Gigabyte G34WQC Manual

Gigabyte AORUS FI27Q-X Manual

Gigabyte GV-N210D3-1GI Manual

Gigabyte GV-N210SL-1GI Manual

Gigabyte M6980X Manual

Gigabyte GA-F2A88XM-DS2 Manual

Gigabyte AIRE M93 ICE Manual

BIOS Setup

(For Naples Server Platform)

User’s Guide

Rev.1.1

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentations:

 For detailed product information, carefully read the User's Manual.

For more information, visit our website at:

http://b2b.gigabyte.com

You are a professional?

Get an access to our complete source of sales, marketing & technical materials at:

http://reseller.b2b.gigabyte.com

- 3 -

Table of Contents

Chapter 1 BIOS Setup ....................................................................................................5

1-1 The Main Menu ................................................................................................ 7

1-2 Advanced Menu ............................................................................................... 9

1-2-1 iSCSIConguration ................................................................................................10

1-2-2 QLogic577xx/578xx10GbEthernetBCM57810 ...................................................11

1-2-3 VLANConguration ................................................................................................24

1-2-4 CPUConguration ..................................................................................................26

1-2-5 SATAConguration.................................................................................................28

1-2-6 USBConguration ..................................................................................................29

1-2-7 AST2500SuperIOConguration ...........................................................................31

1-2-8 SerialPortConsoleRedirection .............................................................................34

1-2-9 PCISubsystemSettings .........................................................................................39

1-2-10 Network Stack ........................................................................................................41

1-2-11 CSMConguration .................................................................................................42

1-2-12 TrustedComputing .................................................................................................44

1-2-13 NVMeConguration ...............................................................................................45

1-3 AMD CBS Menu ............................................................................................. 46

1-3-1 ZenCommonOptions ............................................................................................47

1-3-2 DFCommonOptions ..............................................................................................50

1-3-3 UMCCommonOptions ..........................................................................................51

1-3-4 NBIOCommonOptions ..........................................................................................58

1-3-5 FCHCommonOptions ...........................................................................................59

1-4 ChipsetSetupMenu ....................................................................................... 61

1-4-1 NorthBridge ...........................................................................................................62

1-4-2 ErrorManagement ..................................................................................................65

1-5 ServerManagementMenu ............................................................................. 66

1-5-1 SystemEventLog ..................................................................................................68

1-5-2 ViewFRUInformation ............................................................................................69

1-5-3 BMCNetworkConguration ...................................................................................70

1-5-4 IPv6BMCNetworkConguration ...........................................................................72

1-6 SecurityMenu ................................................................................................ 74

1-6-1 Secure Boot ............................................................................................................75

1-7 Boot Menu ...................................................................................................... 79

1-7-1 UEFINETWORKDriveBBSPriorities ..................................................................81

1-7-2 UEFIApplicationBootPriorities ................................................................... 82

1-8 Save&ExitMenu ........................................................................................... 83

- 4 -

1-9 ABLPOSTCodes .......................................................................................... 84

1-9-1 StartProcessorTestPoints .......................................................................................84

1-9-2 Memorytestpoints .................................................................................................84

1-9-3 PMUTestPoints .....................................................................................................84

1-9-4 OriginalPostCode .................................................................................................85

1-9-5 CPUtestpoints .......................................................................................................86

1-9-6 Topologytestpoints ................................................................................................86

1-9-7 Extendedmemorytestpoint ...................................................................................86

1-9-8 GnbEarlierinit ........................................................................................................87

1-9-9 PMUtestpoints ......................................................................................................90

1-9-10 ABL0testpoints .....................................................................................................90

1-9-11 ABL5testpoints .....................................................................................................90

1-10 AgesaPOSTCodes ....................................................................................... 94

1-10-1 UniversalPostCode ...............................................................................................94

1-10-2 [0xA1XX]ForCZonlymemoryPostcodes .............................................................94

1-10-3 S3InterfacePostCode ..........................................................................................97

1-10-4 PMUPostCode ......................................................................................................97

1-10-5 [0xA5XX]assignedforAGESAPSPModule ..........................................................97

1-10-6 [0xA9XX,0xAAXX]assignedforAGESANBIOModule .......................................100

1-10-7 [0xACXX]assignedforAGESACCXModule .......................................................102

1-10-8 [0xADXX]assignedforAGESADFModule ..........................................................103

1-10-9 [0xAFXX]assignedforAGESAFCHModule ........................................................103

1-11 BIOSPOSTBeepcode(AMIstandard) ....................................................... 105

1-11-1 PEIBeepCodes ...................................................................................................105

1-11-2 DXEBeepCodes .................................................................................................105

1-12 BIOSRecoveryInstruction ........................................................................... 106

- 5 - BIOS Setup

BIOS (Basic Input and Output System) records hardware parameters of the system in the EFI on the

motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup,

saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that

allows the user to modify basic system conguration settings or to activate certain system features. When the

power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to keep the

conguration values in the CMOS.

To access the BIOS Setup program, press the <F2> key during the POST when the power is turned on.

Chapter 1 BIOS Setup

• BIOS ashing is potentially risky, if you do not encounter problems of using the current BIOS

version, it is recommended that you don't ash the BIOS. To ash the BIOS, do it with caution.

Inadequate BIOS ashing may result in system malfunction.

• It is recommended that you not alter the default settings (unless you need to) to prevent system

instability or other unexpected results. Inadequately altering the settings may result in system's

failure to boot. If this occurs, try to clear the CMOS values and reset the board to default values.

(Refer to the Exit section in this chapter or introductions of the battery/clearing CMOS jumper in

Chapter 1 for how to clear the CMOS values.)

BIOS Setup Program Function Keys

<f><g> Move the selection bar to select the screen

<h><i> Move the selection bar to select an item

<+> Increase the numeric value or make changes

<-> Decrease the numeric value or make changes

<Enter> Execute command or enter the submenu

<Esc> Main Menu: Exit the BIOS Setup program

Submenus: Exit current submenu

<F1> Show descriptions of general help

<F3> Restore the previous BIOS settings for the current submenus

<F9> Load the Optimized BIOS default settings for the current submenus

<F10> Save all the changes and exit the BIOS Setup program

BIOS Setup - 6 -

 Main

This setup page includes all the items in standard compatible BIOS.

 Advanced

This setup page includes all the items of AMI BIOS special enhanced features.

(ex: Auto detect fan and temperature status, automatically congure hard disk parameters.)

 AMD CBS

This setup page includes the common items for conguration of AMD motherboard-related information.

 Chipset

This setup page includes all the submenu options for conguring the function of processor, network,

North Bridge, South Bridge, and System event logs.

 Server Management

Server additional features enabled/disabled setup menus.

 Security

Change, set, or disable supervisor and user password. Conguration supervisor password allows you to

restrict access to the system and BIOS Setup.

A supervisor password allows you to make changes in BIOS Setup.

A user password only allows you to view the BIOS settings but not to make changes.

 Boot

This setup page provides items for conguration of boot sequence.

 Save & Exit

Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing

<F10> can also carry out this task.)

Abandon all changes and the previous settings remain in effect. Pressing <Y> to the confirmation

message will exit BIOS Setup. (Pressing <Esc> can also carry out this task.)

- 7 - BIOS Setup

1-1 The Main Menu

Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use

arrow keys to move among the items and press <Enter> to accept or enter other sub-menu.

Main Menu Help

The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu.

Submenu Help

While in a submenu, press <F1> to display a help screen (General Help) of function keys available for the

menu. Press <Esc> to exit the help screen. Help for each item is in the Item Help block on the right side of

the submenu.

• When the system is not stable as usual, select the Restore Defaults item to set your system

to its defaults.

• The BIOS Setup menus described in this chapter are for reference only and may differ by

BIOS version.

Project Name

Displays the project name information.

Project Version

Displays version number of the BIOS setup utility.

Build Date and Time

Displays the date and time when the BIOS setup utility was created.

BMC Information(Note)

BMC Firmware Version(Note)

Displays BMC rmware version information.

Onboard LAN Information

LAN1 MAC Address(Note)

Displays LAN1 MAC address information.

LAN2 MAC Address(Note)

Displays LAN2 MAC address information.

BIOS Setup - 8 -

Total Memory(Note)

Displays the information for the installed memory size.

Memory Speed(Note)

Displays the information for the installed memory speed.

System Date

Sets the date following the weekday-month-day-year format.

System Time

Sets the system time following the hour-minute-second format.

(Note) Functions available on selected models.

- 9 - BIOS Setup

1-2 Advanced Menu

The Advanced menu display submenu options for conguring the function of various hardware components.

Select a submenu item, then press [Enter] to access the related submenu screen.

BIOS Setup - 10 -

1-2-1 iSCSI Conguration

iSCSI Initiator Name

Add an Attempt

Press [Enter] for conguration of advanced items.

Delete Attempts

Press [Enter] for conguration of advanced items.

Change Attempt Order

Press [Enter] for conguration of advanced items.

- 11 - BIOS Setup

1-2-2 QLogic 577xx/578xx 10 Gb Ethernet BCM57810

Main Conguration Page

Firmware Image Menu

Press [Enter] to view device rmware version information.

Device Hardware Conguration Menu

Press [Enter] to congure device and port specic parameters.

MBA Conguration Menu

Press [Enter] to congure Multiple Boot Agent (MBA) parameters.

iSCSI Boot Conguration Menu

Press [Enter] to congure iSCSI boot parameters.

BIOS Setup - 12 -

Multi-Function Mode

Virtualization mode conguration. System must be rebooted in order for changes to take effect.

Options available: SF/SR-IOV. Default setting is SF.

Blink LEDs

Blink LEDs for a duration up to 15 seconds.

Default setting is 0.

Chip Type

Displays the chip type.

PCI Device ID

Displays the PCI device ID.

Bus: Device: Function

Displays the bus number, device number, and function number.

Link Status

Displays the link status.

Parameter MAC Address

Displays the Permanent MAC Address.

Virtual MAC Address

Displays the Virtual MAC Address.

- 13 - BIOS Setup

1-2-2-1 Firmware Image Menu

Main Conguration Page > Firmware Image Menu

Displays the device's rmware version information.

BIOS Setup - 14 -

1-2-2-2 Device Hardware Conguration Menu

Main Conguration Page > Device Hardware Conguration Menu

Congures the device and port specic parameters. Please refer to help text dened per congurable

parameter for more information.

DCB Protocol

Enable/Disable the DCB Protocol.

Options available: Enabled/Disabled. Default setting is Enabled.

Number of VFs per PF

Displays the number of VFs per PF in multiple of 8 (0 to 64).

Max PF MSI-X Vectors

Displays the maximum number of PF MSI-X Vectors. (0 to 64).

UEFI Boot Mode

Species Driver Boot Mode in UEFI environment.

Default setting is UNDI.

MFW Crash Dump Feature

Enables MFW bootcode to collect critical device and system information during unanticipated system

crash.

Options available: Enabled/Disabled. Default setting is Enabled.

- 15 - BIOS Setup

1-2-2-3 MBA Conguration Menu

Main Conguration Page > MBA Conguration Menu

Congures the Multiple Boot Agent (MBA) parameters.

QLogic 577xx/578xx 10 Gb Ethernet BCN57810

Legacy Boot Protocol

Selects a non-UEFI Boot Protocol to be used.

Options available: PXE/iSCSI/None. Default setting is None.

BIOS Setup - 16 -

Boot Strap Type

Selects the BIOS interrupt call type.

Auto Detect: Auto Detect interrupt type; BBS: BIOS Boot Specification; Int 18h: Interrupt vector to

execute cassette BASIC; Int 19h: BIOS Interrupt vector used to load OS.

Options available: Auto Detect/BBS/Int 18h/Int 19h. Default setting is Auto Detect.

Hide Setup Prompt

Congures whether Setup Prompt is displayed during ROM initialization.

Options available: Enabled/Disabled. Default setting is Disabled.

Setup Key Stroke

Congure key strokes to invoke conguration menu.

Options available: Ctrl-S/Ctrl-B. Default setting is Ctrl-S.

Banner Message Timeout

Selects the timeout value. (0 defaults to 4 seconds, 15 is no delay, 1-14 is timeout value in seconds).

Default setting is 5.

Link Speed

Congures the link speed.

Default setting is 10 Gbps Full.

Wake On LAN

Congures Wake on LAN (WOL). This setting is per port.

Options available: Enabled/Disabled. Default setting is Disabled.

VLAN Mode

Congures the virtual LAN mode.

Options available: Enabled/Disabled. Default setting is Disabled.

VLAN ID (1..4094)

Displays the virtual LAN ID (1 to 4094).

Boot Retry Count

Selects the number of boot retries.

Options available: No Retry/1 Retry/2 Retries/3 Retries/4 Retries/5 Retries/6 Retries/Indenite Retries.

Default setting is No Retry.

- 17 - BIOS Setup

1-2-2-4 iSCSI Boot Conguration Menu

Main Conguration Page > iSCSI Boot Conguration Menu

Congures the iSCSI boot parameters.

iSCSI General Parameters

Press [Enter] for conguration of advanced items.

iSCSI Initiator Parameters

Press [Enter] for conguration of advanced items.

iSCSI First Target Parameters

Press [Enter] for conguration of advanced items.

iSCSI Second Target Parameters

Press [Enter] for conguration of advanced items.

BIOS Setup - 18 -

1-2-2-4-1 iSCSI General Parameters

Main Conguration Page > iSCSI Boot Conguration Menu > iSCSI General

Parameters

Congures the iSCSI general boot parameters.

TCP/IP Parameters via DHCP

Acquires the TCP/IP conguration via DHCP.

Options available: Enabled/Disabled. Default setting is Enabled.

IP Autoconguration

Auto-congures the IP conguration.

Options available: Enabled/Disabled. Default setting is Disabled.

Please note that this item is congurable when TCP/IP Parameters via DHCP is set to Disabled.

- 19 - BIOS Setup

iSCSI Parameters via DHCP

Acquires the iSCSI parameters via DHCP.

Options available: Enabled/Disabled. Default setting is Enabled.

CHAP Authentication

Enable/Disable the CHAP authentication.

Options available: Enabled/Disabled. Default setting is Disabled.

Boot to Target

Enable/Disable booting to iSCSI target after log-on.

Options available: Disabled/Enabled/One Time Disabled. Default setting is Enabled.

DHCP Vendor ID

Press [Enter] to congures the DHCP vendor ID (up to 32 bytes long).

Link Up Delay Time

Congures the link up to delay time in seconds (0..225).

Use TCP Timestamp

Enable/Disable the TCP timestamp.

Options available: Enabled/Disabled. Default setting is Disabled.

Target as rst HDD

Enable/Disable target appears as a rst hard disk drive (HDD) in the system.

Options available: Enabled/Disabled. Default setting is Disabled.

LUN Busy Retry Count

Congures the number of retries in 2 second intervals when LUN is busy (0..60).

Default setting is 0.

IP Version

Displays the IP version supported. Modifying this parameter will reset all IP-related elds.

BIOS Setup - 20 -

1-2-2-4-2 iSCSI Initiator Parameters

Main Conguration Page > iSCSI Boot Conguration Menu > iSCSI Initiator

Parameters

Congures the iSCSI initiator parameters.

IP Address

Congures initiator IP address.

Subnet Mask

Congures IP subnet mask.

Default Gateway

Congures default gateway IP address.

- 21 - BIOS Setup

Primary DNS

Congures the primary DNS IP address.

Secondary DNS

Congures the second DNS IP address.

iSCSI Name

Congures the iSCSI name.

CHAP ID

Configures the Challenge-Handshake Authentication Protocol (CHAP) ID (up to 128 characters in

length).

CHAP Secret

Configure the Challenge-Handshake Authentication Protocol (CHAP) Secret (12 to 16 characters in

length).

BIOS Setup - 22 -

1-2-2-4-3 iSCSI First Target/Second Target Parameters

Main Conguration Page > iSCSI Boot Conguration Menu > iSCSI First Target/

Second Target arameters

Congures the iSCSI rst target parameters.

Connect

Enable/Disable the target establishment.

Options available: Enabled/Disabled. Default setting is Disabled.

IP Address

Congures the target IP address.

- 23 - BIOS Setup

TCP Port

Congures the target TCP port number (13365535).

Boot LUN

Congure the target boot LUN number (0..255).

iSCSI Name

Congures the iSCSI name.

CHAP ID

Configures the Challenge-Handshake Authentication Protocol (CHAP) ID (up to 128 characters in

length).

CHAP Secret

Configure the Challenge-Handshake Authentication Protocol (CHAP) Secret (12 to 16 characters in

length).

BIOS Setup - 24 -

1-2-3 VLAN Conguration

Enter Conguration Menu

Press [Enter] to enter conguration menu for VLAN conguration.

- 25 - BIOS Setup

1-2-3-1 VLAN Conguration Menu

Create new VLAN

VLAN ID

Sets a VLAN ID of new VLAN or existing VLAN, valid value is 0 to 4094.

Priority

Sets the 802.1Q Priority, valid value is 0 to 7.

Add VLAN

Creates a new VLAN or update existing VLAN.

Congured VLAN List

Displays the congured VLAN list information.

Options available: Enabled/Disabled. Default setting is Disabled.

Remove VLAN(Note)

Removes the selected VLANs.

Please note that this item is only executable when Congured VLAN List is set to Enabled, and

once executed the Congured VLAN List will be updated accordingly.

(Note) Only Supported when Congured VLAN List is set to Enabled.

BIOS Setup - 26 -

1-2-4 CPU Conguration

CPU Conguration

SVM Mode

Enable/disable the CPU Virtualization.

Options available: Enabled/Disabled. Default setting is Enabled.

SMEE

Controls the Secure Memory Encryption Enable (SMEE) function.

Options available: Enabled/Disabled. Default setting is Enabled.

CPU 0 Information

Press [Enter] to view the memory information related to CPU 0.

- 27 - BIOS Setup

1-2-4-1 CPU 0 Information

BIOS Setup - 28 -

1-2-5 SATA Conguration

- 29 - BIOS Setup

1-2-6 USB Conguration

USB Conguration

USB Controllers:

Displays the supported USB controllers.

USB Devices:

Displays the USB devices connected to the system.

Legacy USB Support

Enable/disable the Legacy USB support fuction. AUTO option disables legacy support if no USB devices

are connected. DISABLE option will keep USB devices available only for EFI applications.

Options available: Enabled/Disabled/Auto. Default setting is Enabled.

XHCI Hand-off

This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be

claimed by XHCI driver.

Options available: Enabled/Disabled. Default setting is Enabled.

USB Mass Storage Driver Support(Note)

Enable/Disable the USB Mass Storage Driver Support.

Options available: Enabled/Disabled. Default setting is Enabled.

Port 60/64 Emulation

Enables the I/O port 60h/64h emulation support. This should be enabled for the complete USB Keyboard

Legacy support for non-USB aware OSes.

Options available: Enabled/Disabled. Default setting is Enabled.

USB hardware delays and time-outs:

USB transfer time-out

The time-out value for Control, Bulk, and Interrupt transfers.

Options available: 1 sec/5 sec/10 sec/20 sec. Default setting is 20 sec.

(Note) This item is present only if you attach USB devices.

BIOS Setup - 30 -

Device reset time-out

USB mass storage device Start Unit command time-out.

Options available: 10 sec/20 sec/30 sec/40 sec. Default setting is 20 sec.

Device power-up delay

Maximum time the device will take before it properly reports itself to the Host Controller. "Auto" uses

default value: for a Root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor.

Options available: Auto/Manual. Default setting is Auto.

- 31 - BIOS Setup

1-2-7 AST2500 Super IO Conguration

AST2500 Super IO Conguration

Super IO Chip

Displays the super IO chip information.

Serial Port 1/2 Conguration

Press [Enter] for conguration of advanced items.

BIOS Setup - 32 -

1-2-7-1 Serial Port 1/2 Conguration

Serial Port 1/2 Conguration

Serial Port(Note1)

Enable/Disable the Serial Port (COM). When set to Enabled allows you to congure the Serial port 1/2

settings. When set to Disabled, displays no conguration for the serial port.

Options available: Enabled/Disabled. Default setting is Enabled.

Devices Settings(Note2)

Displays the Serial Port 1/2 device settings.

(Note1) Advanced items prompt when this item is dened. (Note)

(Note2) This item appears when Serial Port is set to Enabled.

- 33 - BIOS Setup

Change Settings(Note2)

Select an optimal settings for Super IO Device.

Options available for Serial Port 1:

Auto

IO=3F8h; IRQ=4;

IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;

IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;

IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;

IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;

Default setting is Auto.

Options available for Serial Port 2:

Auto

IO=2F8h; IRQ=3;

IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;

IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;

IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;

IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;

Default setting is Auto.

Please note that this item is congurable when Serial Port is set to Enabled.

BIOS Setup - 34 -

1-2-8 Serial Port Console Redirection

COM1/COM2 Serial Over LAN Console Redirection(Note)

Select whether to enable console redirection for the specied device. Console redirection enables the

users to manage the system from a remote location.

Options available: Enabled/Disabled. Default setting is Disabled.

Legacy Console Redirection

Selects a COM port for Legacy serial redirection. The options are dependent on the available COM

ports.

Serial Port for Out-of-Band Management/Windows Emergency Management Services

(EMS) Console Redirection(Note)

Selects a COM port for EMS console redirection. EMS console redirection allows the user to congure

Console Redirection Settings to support Out-of-Band Serial Port management.

Options available: Enabled/Disabled. Default setting is Disabled.

COM1/COM2 Serial Over LAN/Legacy/Serial Port for Out-of-Band EMS Console

Redirection Settings

Press [Enter] for conguration of advanced items.

Please note that this item is congurable when COM1/COM2 Serial Over LAN/Serial Port for Out-

of-Band Management EMS Console Redirection is set to Enabled.

(Note) Advanced items prompt when this item is dened.

- 35 - BIOS Setup

1-2-8-1 COM1/COM2 Serial Over LAN/Legacy/Serial Port for Out-of-Band EMS

Console Redirection Settings

BIOS Setup - 36 -

COM1/COM2 Serial Over LAN Console Redirection Settings

Terminal Type

Selects a terminal type to be used for console redirection.

Options available: VT100/VT100+/ANSI /VT-UTF8. Default setting is ANSI.

Bits per second

Selects the transfer rate for console redirection.

Options available: 9600/19200/38400/57600/115200. Default setting is 115200.

Data Bits

Selects the number of data bits used for console redirection.

Options available: 7/8. Default setting is 8.

- 37 - BIOS Setup

Parity

A parity bit can be sent with the data bits to detect some transmission errors.

Even: parity bit is 0 if the num of 1's in the data bits is even.

Odd: parity bit is 0 if num of 1's in the data bits is odd.

Mark: parity bit is always 1. Space: Parity bit is always 0.

Mark and Space Parity do not allow for error detection.

Options available: None/Even/Odd/Mark/Space. Default setting is None.

Stop Bits

Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The standard

setting is 1 stop bit. Communication with slow devices may require more than 1 stop bit.

Options available: 1/2. Default setting is 1.

Flow control

Flow control can prevent data loss from buffer overow. When sending data, if the receiving buffers are

full, a 'stop' signal can be sent to stop the data ow. Once the buffers are empty, a 'start' signal can be

sent to re-start the ow. Hardware ow control uses two wires to send start/stop signals.

Options available: None/Hardware RTS/CTS. Default setting is None.

VT-UTF8 Combo Key Support

Enable/Disable the VT-UTF8 Combo Key Support.

Options available: Enabled/Disabled. Default setting is Enabled.

Recorder Mode(Note)

When this mode enabled, only texts will be send. This is to capture Terminal data.

Options available: Enabled/Disabled. Default setting is Disabled.

Resolution 100x31(Note)

Enable/Disable extended terminal resolution.

Options available: Enabled/Disabled. Default setting is Enabled.

Putty KeyPad(Note)

Selects FunctionKey and KeyPad on Putty.

Options available: T100/LINUX/XTERMR6/SCO/ESCN/VT400. Default setting is VT100.

Legacy Console Redirection Settings

Redirection COM Port

Selects a COM port to display redirection of Legacy OS and Legacy OPROM Messages.

Options available: COM1/COM2 Serial Over LAN. Default setting is COM1.

Resolution

On Legacy OS, the Number of Rows and Columns supported redirection.

Options available: 80x24/80x25. Default setting is 80x24.

Redirect After POST

When Bootloader is selected, then Legacy Console Redirection is disabled before booting to legacy OS.

When Always Enable is selected, then Legacy Console Redirection is enabled for legacy OS.

Options available: Bootloader/Always Enable. Default setting is Always Enable.

(Note) Advanced items prompt when this item is dened.

BIOS Setup - 38 -

Serial Port for Out-of-Band EMS Console Redirection Settings

Out-of-Band Mgmt Port

Microsoft Windows Emerency Management Service (EMS) allows for remote management of a Windows

Server OS through a serial port.

Options available: COM1/COM2 Serial Over LAN. Default setting is COM1.

- 39 - BIOS Setup

1-2-9 PCI Subsystem Settings

PCI Bus Driver Version

Displays the PCI Bus Driver version information.

PCI Devices Common Settings:

PCI Latency Timer

Sets the value to be programmed into PCI Latency Timer Register.

Options available: 32 PCI Bus Clocks/64 PCI Bus Clocks/96 PCI Bus Clocks/128 PCI Bus Clocks/160

PCI Bus Clocks/192 PCI Bus Clocks/224 PCI Bus Clocks/248 PCI Bus Clocks.

Default setting is 32 PCI Bus Clocks.

PCI-X Latency Timer

Sets the value to be programmed into PCI-X Latency Timer Register.

Options available: 32 PCI Bus Clocks/64 PCI Bus Clocks/96 PCI Bus Clocks/128 PCI Bus Clocks/160

PCI Bus Clocks/192 PCI Bus Clocks/224 PCI Bus Clocks/248 PCI Bus Clocks.

Default setting is 64 PCI Bus Clocks.

VGA Palette Snoop

Enable/Disable VGA Palette Registers Snooping.

Options available: Enabled/Disabled. Default setting is Disabled.

PERR#/SERR# Generation

Enable/Disable PCI Device to Generate PERR#/SERR#.

Options available: Enabled/Disabled. Default setting is Disabled.

Above 4G Decoding

Enable/Disable 64-bit capable Devices to be decoded in Above 4G Address Space (Only if System

Supports 64 bit PCI Decoding).

Options available: Enabled/Disabled. Default setting is Enabled.

BIOS Setup - 40 -

SR-IOV Support

If the system has SR-IOV capable PCIe devices, this item Enable/Disable Single Root IO Virtualization

Support.

Options available: Enabled/Disabled. Default setting is Disabled.

- 41 - BIOS Setup

1-2-10 Network Stack

Network stack

Enable/Disable the UEFI network stack.

Options available: Enabled/DIsabled. Default setting is Enabled.

Ipv4 PXE Support(Note)

Enable/Disable the Ipv4 PXE feature.

Options available: Enabled/DIsabled. Default setting is Enabled.

Ipv4 HTTP Support(Note)

Enable/Disable the Ipv4 HTTP feature.

Options available: Enabled/DIsabled. Default setting is Disabled.

Ipv6 PXE Support(Note)

Enable/Disable the Ipv6 PXE feature.

Options available: Enabled/DIsabled. Default setting is Disabled.

Ipv6 HTTP Support(Note)

Enable/Disable the Ipv6 HTTP feature.

Options available: Enabled/DIsabled. Default setting is Disabled.

Ipv6 Conguration Policy(Note)

Sets the IP6 Conguration Policy.

Options available: Automatic/Manual. Default setting is Manual.

PXE boot wait time(Note)

Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count(Note)

Press the <+> / <-> keys to increase or decrease the desired values.

(Note) This item appears when Network Stack is set to Enabled.

BIOS Setup - 42 -

1-2-11 CSM Conguration

Compatibility Support Module Conguration

CSM Support(Note)

Enable/Disable the Compatibility Support Module (CSM) support.

Options available: Enabled/Disabled. Default setting is Disabled.

CSM16 Module Version

Displays the CSM module version information.

Please note that this item is visible when CSM Support is set to Enabled.

(Note) Advanced items prompt when this item is set to Enabled.

- 43 - BIOS Setup

GateA20 Active

When set to Upon Request, GA20 can be disabled using BIOS services. When set to Always, GA20

cannot be disabled; this option is useful when any RT code is executed above 1MB.

Options available: Upon Request/Always. Default setting is Upon Request.

Please note that this item is congurable when CSM Support is set to Enabled.

INT19 Trap Response

Configures BIOS reaction on INT19 trapping by Option ROM. When set to Immediate, the system

executes the trap right away. When set to Postponed, the system executes the trap during legacy boot.

Options available: Immediate/Postponed. Default setting is Immediate.

Please note that this item is congurable when CSM Support is set to Enabled.

Boot option lter

Controls the Legacy/UEFI ROMs priority.

Options available: UEFI and Legacy/Legacy only/UEFI. Default setting is UEFI and Legacy.

Please note that this item is congurable when CSM Support is set to Enabled.

Option ROM execution

Network

Controls the execution of UEFI and Legacy PXE Option ROM.

Options available: Do not launch/UEFI/Legacy. Default setting is UEFI.

Please note that this item is congurable when CSM Support is set to Enabled.

Storage

Controls the execution of UEFI and Legacy Storage Option ROM.

Options available: Do not launch/UEFI/Legacy. Default setting is UEFI.

Please note that this item is congurable when CSM Support is set to Enabled.

Video

Controls the execution of UEFI and Legacy Video Option ROM.

Options available: Do not launch/UEFI/Legacy. Default setting is UEFI.

Please note that this item is congurable when CSM Support is set to Enabled.

Other PCI devices

Determines Option ROM execution policy for devices other than Network, Storage, or Video.

Options available: Do not launch/UEFI/Legacy. Default setting is UEFI.

Please note that this item is congurable when CSM Support is set to Enabled.

BIOS Setup - 44 -

1-2-12 Trusted Computing

Conguration

Security Device Support

Enable/Disable the TPM support feature.

Options available: Enable/Disable. Default setting is Disable.

Current Status Information

Displays current TPM status information.

- 45 - BIOS Setup

1-2-13 NVMe Conguration

NVMe controller and Drive information

Displays the NVMe devices connected to the system.

BIOS Setup - 46 -

1-3 AMD CBS Menu

AMD CBS menu displays submenu options for configuring the CPU-related information that the BIOS

automatically sets. Select a submenu item, then press [Enter] to access the related submenu screen.

- 47 - BIOS Setup

1-3-1 Zen Common Options

Zen Common Options

Core Performance Boost

Enable/disable the Core Performance Boost.

Options available: Disabled/Auto. Default setting is Auto.

Global C-state Control

Controls the IO based C-state generation and DF C-states.

Options available: Disabled/Enabled/Auto. Default setting is Auto.

Core/Thread Enablement

Press [Enter] for conguration of advanced items.

BIOS Setup - 48 -

1-3-1-1 Core/Thread Enablement

- 49 - BIOS Setup

Core/Thread Enablement

Displays the Core/Thread Enablement information.

Disagree

Disagrees with the Core/Thread Enablement settings.

Agree

Agrees with the Core/Thread Enablement settings.

Downcore control

Sets the number of cores to be used. Once this option has been used to remove any cores, a POWER

CYCLE is required in order for future selections to take effect.

Options available: Two (1+1) / Two (2+0) / Three (3+0) / Four (2+2) / Four (4+0) / Six (3+3) / Auto.

Default setting is Auto.

BIOS Setup - 50 -

1-3-2 DF Common Options

DF Common Options

Memory interleaving

Controls fabric level memory interleaving (AUTO, none, channel, die, socket). Note that channel, die,

and socket options have requirements on memory populations and it will be ignored if the memory

doesn't support the selected option.

Options available: None/Channel/Die/Socket/Auto. Default setting is Auto.

Memory interleaving size

Controls the memory interleaving size. The valid value are AUTO, 256 bytes, 512 bytes, 1Kbytes or

2Kbytes. This determines the starting address of the interleave (bit 8, 9, 10 or 11).

Options available: 256 Bytes/512 Bytes/1 KB/2KB/Aut. Default setting is Auto.

- 51 - BIOS Setup

1-3-3 UMC Common Options

UMC Common Options

DDR4 Common Options

Press [Enter] for conguration of advanced items.

DRAM Memory Mapping

Press [Enter] for conguration of advanced items.

BIOS Setup - 52 -

1-3-3-1 DDR4 Common Options

DDR4 Common Options

Enforce POR

Press [Enter] to congure the enforce POR.

Common RAS

Press [Enter] to congure the common RAS.

Security

Press [Enter] to congure the security.

- 53 - BIOS Setup

1-3-3-1-1 Enforce POR

BIOS Setup - 54 -

Enforce POR

Enables enforcement of Plan Of Record (POR) restrictions for DDR4 frequency and voltage

programming. Memory speeds will be capped at Intel guidelines.

WARNING - DAMAGE CAUSED BY USE OF YOUR AMD PROCESSOR OUTSIDE OF

SPECIFICATION OR IN EXCESS OF FACTORY SETTINGS ARE NOT COVERED UNDER YOUR

AMD PRODUCT WARRANTY AND MAY NOT BE COVERED BY YOUR SYSTEM MANUFACTURER'S

WARRANTY.

I Decline

Declines enabling Enforce POR.

I Accept

Accepts enabling Enforce POR.

Overclock

Congures the memory overclock settings.

Options available: Auto/Enabled. Default setting is Auto.

- 55 - BIOS Setup

1-3-3-1-2 Common RAS

Common RAS

ECC Conguration

DRAM ECC Symbol Size

Congures the DRAM ECC Symbol Size. (x4/x8) - EMC_CH::EccCtrl[ECCsymbolSize].

Options available: x4/x8/Auto. Default setting is Auto.

DRAM ECC Enable

Enable/disable DRAM ECC. When set to Auto, it will set ECC to enable.

Options available: Disabled/Enabled/Auto. Default setting is Auto.

BIOS Setup - 56 -

1-3-3-1-3 Security

Security

TSME

Transparent SME: AddrTweakEn = 1; ForceEncrEn = 1; DataEncrEn= 0.

Options available: Enabled/Disabled/Auto. Default setting is Auto.

Data Scramble

Data scrambling: DataScrambleEn.

Options available: Enabled/Disabled/Auto. Default setting is Auto.

- 57 - BIOS Setup

1-3-3-2 DRAM Memory Mapping

DRAM Memory Mapping

Chipselect Interleaving

Interleave memory blocks across the DRAM chip selects for CPU 0.

Options available: Disabled/Auto. Default setting is Auto.

BankGroupSwap

Congures the BankGroupSwap. BankGroupSwap (BGS) is a new memory mapping option in AGESA

that alters how applications get assigned to physical locations within the memory modules. When this

option sets to Auto, it is null: No help string.

Options available: Enabled/Disabled/Auto. Default setting is Auto.

BIOS Setup - 58 -

1-3-4 NBIO Common Options

NBIO Common Options

NB Conguration

Press [Enter] to congure the NB conguration.

Determinism Slider

Auto = Use default performance determinism settings.

Options available: Auto/Power/Performance. Default setting is Auto.

cTDP Control

Auto = Use the fused cTDP; Manual = User can set customized cTDP.

Options available: Manual/Auto. Default setting is Auto.

- 59 - BIOS Setup

1-3-5 FCH Common Options

FCH Common Options

AC Power Loss Options

Press [Enter] to congure the AC loss control.

BIOS Setup - 60 -

1-3-5-1 AC Power Loss Options

AC Power Loss Options

AC Loss Control

Selects the AC Loss Control method.

Options available: Always Off/Always On/Reserved/Previous. Default setting is Always Off.

- 61 - BIOS Setup

1-4 Chipset Setup Menu

Chipset Setup menu displays submenu options for conguring the function of the North Bridge. Select a

submenu item, then press [Enter] to access the related submenu screen.

SMT Mode

Enables imultaneous multithreading (SMT). Off=1T single-thread; Auto=2T two-thread if capable.

Options available: Off/Auto. Default setting is Auto.

PCIe Link Training Type

Debugges the PCIe link training issue in 1 or 2 steps.

Options available: 1 Step/2 Step. Default setting is 2 Step.

Onboard LAN Controller

Enable/Disable LAN controller.

Options available: Enabled/Disabled. Default setting is Enabled.

North Bridge

Press [Enter] for conguration of advanced items.

Error Management

Press [Enter] for conguration of advanced items.

BIOS Setup - 62 -

1-4-1 North Bridge

North Bridge Conguration

Memory Information

Total Memory

Displays the total memory information.

Memory Conguration

Press [Enter] to congure the north bridge memory.

CPU 0 Information

Press [Enter] to view information related to CPU 0.

- 63 - BIOS Setup

1-4-1-1 Memory Conguration

Memory Conguration

Memory Clock

This option allows user to select different memory clock. Default value is 800 Mhz.

Options available: Auto/1333MHz/1600MHz/1866MHz/2133MHz/2400MHz. Default setting is Auto.

BIOS Setup - 64 -

1-4-1-2 CPU 0 Information

CPU 0 Information

Displays the Information related to CPU 0.

- 65 - BIOS Setup

1-4-2 Error Management

Error Management

Platform First Error Handling

Enable/Disable PFEH.

Options available: Enabled/Disabled. Default setting is Enabled.

MCA Error Threshold Count

MCA Error Threshold Count. 0 - Disable Error.

Options available: 0/1/5/10/100/1000. Default setting is 10.

DRAM Address/Command Parity With Replay

RCD Parity

Enable/disable Registering Clock Driver (RCD) Parity (RDimmParEn).

Options available: Enabled/Disabled. Default setting is Enabled.

DRAM Address Command Parity Retry

Enable/disable DRAM Address Command Parity Retry.

Options available: Enabled/Disabled. Default setting is Disabled.

DRAM Write Data CRC with Retry

Write CRC Enable

If CRC is enabled, the memory is expecting CRC to be sent with the write data.

Options available: Enabled/Disabled. Default setting is Disabled.

BIOS Setup - 66 -

1-5 Server Management Menu

FRB-2 Timer (Note)

Enable/Disable FRB-2 timer (POST timer).

Options available: Enabled/Disabled. Default setting is Disabled.

FRB-2 Timer timeout

Congure the FRB2 Timer timeout.

Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is 6 minutes.

Please note that this item is congurable when FRB-2 Timer is set to Enabled.

FRB-2 Timer Policy

Congure the FRB2 Timer policy.

Options available: Do Nothing/Reset/Power Down. Default setting is Do Nothing.

Please note that this item is congurable when FRB-2 Timer is set to Enabled.

OS Watchdog Timer (Note)

Enable/Disable OS Watchdog Timer function.

Options available: Enabled/Disabled. Default setting is Disabled.

OS Wtd Timer Timeout

Congure OS Watchdog Timer.

Options available: 5 minutes/10 minutes/15 minutes/20 minutes. Default setting is 10 minutes.

Please note that this item is congurable when OS Watchdog Timer is set to Enabled.

OS Wtd Timer Policy

Congure OS Watchdog Timer Policy.

Options available: Reset/Do Nothing/Power Down. Default setting is Reset.

Please note that this item is congurable when OS Watchdog Timer is set to Enabled.

(Note) Advanced items prompt when this item is set to Enabled.

- 67 - BIOS Setup

System Event Log

Press [Enter] for conguration of advanced items.

View FRU Information

Press [Enter] to view the advanced items.

BMC network conguration

Press [Enter] for conguration of advanced items.

IPv6 BMC Network Conguration

Press [Enter] for conguration of advanced items.

BIOS Setup - 68 -

1-5-1 System Event Log

Enabling/Disabling Options

SEL Components

Change this item to enable or disable all features of System Event Logging during boot.

Options available: Enabled/Disabled. Default setting is Enabled.

Erasing Settings

Erasing SEL

Choose options for erasing SEL.

Options available: No/Yes, On next reset/Yes, On every reset. Default setting is No.

When SEL is Full

Choose options for reactions to a full SEL.

Options available: Do Nothing/Erase Immediately. Default setting is Do Nothing.

Custom EFI Logging Options

Log EFI Status Codes

Enable/Disable the logging of EFI Status Codes (if not already converted to legacy).

Options available: Disabled/Both/Error code/Progress code. Default setting is Error code.

NOTE: All values changed here do not take effect until computer is restarted.

- 69 - BIOS Setup

1-5-2 View FRU Information

The FRU page is a simple display page for basic system ID information, as well as System product

information. Items on this window are non-congurable.

(Note) The model name will vary depends on the product you purchased

BIOS Setup - 70 -

1-5-3 BMC Network Conguration

Select NCSI and Dedicated LAN

Selects to congure LAN channel parameters statically or dynamically (by BIOS or BMC). Do nothing

option will not modify any BMC network parameters during BIOS phase. If you select Mode1, Mode2, or

Mode3 option, it will request you complete the network congurations.

Options available: Do Nothing/Mode1 (Dedicated)/Mode2(NSCI)/Mode3 (Failover).

Default setting is Do Nothing.

- 71 - BIOS Setup

Lan Channel 1

Conguration Address source

Select to congure LAN channel parameters statically or dynamically (DHCP). Unspecied option will not

modify any BMC network parameters during BIOS phase.

Options available: Unspecied/Static/DynamicBmcDhcp. Default setting is Unspecied.

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.

Please note that the IP address must be in three digitals, for example, 192.168.000.001.

Router IP address

Displays the Router IP Address information.

Station MAC address

Displays the MAC Address information.

Real-time synchronize BMC network parameter values

Press [Enter] to synchronize the BMC network parameter values.

BIOS Setup - 72 -

1-5-4 IPv6 BMC Network Conguration

IPv6 BMC Lan Channel 1

IPv6 BMC Lan Option(Note)

Enable/Disable IPv6 BMC LAN channel function. When this item is disabled, the system will not modify

any BMC network during BIOS phase.

Options available: Enable/Disable. Default setting is Disable.

(Note) Advanced items prompt when this item is set to Enable.

- 73 - BIOS Setup

IPv6 BMC Lan IP Address Source

Select to congure LAN channel parameters statically or dynamically (by BIOS or BMC).

Options available: Unspecied/Static/Dynamic-Obtained by BMC running DHCP.

Default setting is Dynamic-Obtained by BMC running DHCP.

Please note that this item is congurable when IPv6 BMC Lan Option is set to Enable.

IPv6 BMC Lan IP Address/Prex Length

Check if the IPv6 BMC LAN IP address matches those displayed on the screen.

Please note that this item is congurable when IPv6 BMC Lan Option is set to Enable.

BIOS Setup - 74 -

1-6 Security Menu

The Security menu allows you to safeguard and protect the system from unauthorized use by setting up

access passwords.

There are two types of passwords that you can set:

• Administrator Password

Entering this password will allow the user to access and change all settings in the Setup Utility.

• User Password

Entering this password will restrict a user’s access to the Setup menus. To enable or disable

this eld, a Administrator Password must rst be set. A user can only access and modify the

System Time, System Date, and Set User Password elds.

Administrator Password

Press [Enter] to congure the administrator password.

User Password

Press [Enter] to congure the user password.

Secure Boot

Press [Enter] for conguration of advanced items.

- 75 - BIOS Setup

1-6-1 Secure Boot

System Mode

Displays the system is in User mode or Setup mode.

Secure Boot

Displays the Secure Boot function is actived or not actived.

Vendor Keys

Displays the Vendor Keys function is actived or not actived.

Attempt Secure Boot

Secure Boot activated when Platform Key (PK) is enrolled, System mode is User/Deployed, and CSM

function is disabled.

BIOS Setup - 76 -

When this option is set to Enabled, an "Platform in Setup Mode!" message will prompt to request re-

enroll Platform Key (PK).

Options available: Enabled/Disabled. Default setting is Disabled.

Secure Boot Mode(Note)

Secure Boot requires all the applications that are running during the booting process to be pre-signed

with valid digital certicates. This way, the system knows all the les being loaded before Windows loads

and gets to the login screen have not been tampered with.

When set to Standard, it will automatically load the Secure Boot keys form the BIOS databases.

When set to Custom, you can customize the Secure Boot settings and manually load its keys from the

BIOS database.

Options available: Standard/Custom. Default setting is Custom.

Key Management

Press [Enter] for conguration of advanced items.

Please note that this item is congurable when Secure Boot Mode is set to Custom.

(Note) Advanced items prompt when this item is set to Custom.

- 77 - BIOS Setup

1-6-1-1 Key Management

Provision Factory Defaults

Allows to provision factory default Secure Boot keys when system is in Setup Mode.

Options available: Enabled/Disabled. Default setting is Disabled.

Install Factory Default Keys

Installs all factory default keys. It will force the system in User Mode.

Options available: Yes/No.

Enroll E Image

Press [Enter] to enroll SHA256 hash of the binary into Authorized Signature Database (DB).

Save all Secure Boot variables

Press [Enter] to save all Secure Boot Keys and Key variables.

Secure Boot variable

Displays the current status of the variables used for secure boot.

Platform Key (PK)

Displays the current status of the Platform Key (PK).

Press [Enter] to congure a new PK.

Options available: Set New.

Key Exchange Keys (KEK)

Displays the current status of the Key Exchange Key Database (KEK).

Press [Enter] to congure a new KEK or load additional KEK from storage devices.

Options available: Set New/Append.

Authorized Signatures (DB)

Displays the current status of the Authorized Signature Database.

Press [Enter] to congure a new DB or load additional DB from storage devices.

Options available: Set New/Append.

BIOS Setup - 78 -

Forbidden Signatures (DBX)

Displays the current status of the Forbidden Signature Database.

Press [Enter] to congure a new dbx or load additional dbx from storage devices.

Options available: Set New/Append.

Authorized TimeStamps (DBT)

Displays the current status of the Authorized TimeStamps Database.

Press [Enter] to congure a new DBT or load additional DBT from storage devices.

Options available: Set New/Append.

OsRecovery Signatures

Displays the current status of the OsRecovery Signature Database.

Press [Enter] to congure a new OsRecovery Signature or load additional OsRecovery Signature from

storage devices.

Options available: Set New/Append.

- 79 - BIOS Setup

1-7 Boot Menu

The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error

message if the legacy drive(s) specied is not bootable.

Boot Conguration

Setup Prompt Timeout

Number of seconds to wait for setup activation key. 65535 (0xFFFF) means indenite waiting.

Press the numeric keys to input the desired values.

Bootup NumLock State

Enable/Disable the Bootup NumLock function.

Options available: On/Off. Default setting is On.

Full Screen LOGO Show

Enable/Disable the Full Screen Logo Show option.

Options available: Enabled/Disabled. Default setting is Enabled.

New Boot Option Policy

Controls the placement of newly detected UEFI boot options.

Options available: Default/Place First/Place Last. Default setting is Default.

Boot mode select

Selects the boot mode.

Options available: LEGACY/UEFI. Default setting is UEFI.

BIOS Setup - 80 -

FIXED BOOT ORDER Priorities

Boot Option #1/#2/#3/#4/#5

Press [Enter] to congure the boot priority.

By default, the server searches for boot devices in the following secquence:

1. Hard disk drive.

2. CD-COM/DVD drive.

3. USB device.

4. Network device.

5. UEFI device.

UEFI Network Drive BBS Priorities

Press [Enter] to congure the boot priority.

UEFI Application Boot Priorities

Press [Enter] to congure the boot priority.

- 81 - BIOS Setup

1-7-1 UEFI NETWORK Drive BBS Priorities

The UEFI network drive BBS priorities submenu allows you to specify the boot device priority from the

available UEFI network drives during system boot-up. BIOS setup will display an error message if the legacy

drive(s) specied is not bootable.

BIOS Setup - 82 -

1-7-2 UEFI Application Boot Priorities

The UEFI application boot priorities submenu allows you to specify the boot device priority from the available

UEFI applications during system boot-up. BIOS setup will display an error message if the legacy drive(s)

specied is not bootable.

- 83 - BIOS Setup

1-8 Save & Exit Menu

The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then

press Enter.

Save Options

Save Changes and Exit

Saves changes made and closes the BIOS setup.

Options available: Yes/No.

Discard Changes and Exit

Discards changes made and exits the BIOS setup.

Options available: Yes/No.

Save Changes

Saves changes made in the BIOS setup.

Options available: Yes/No.

Default Options

Restore Defaults

Loads the default settings for all BIOS setup parameters. Setup Defaults are quite demanding in terms

of resources consumption. If you are using low-speed memory chips or other kinds of low-performance

components and you choose to load these settings, the system might not function properly.

Options available: Yes/No.

Boot Override

Press [Enter] to congure the device as the boot-up drive.

BIOS Setup - 84 -

1-9 ABL POST Codes

1-9-1 StartProcessorTestPoints

Entry used for range testing for @b Processor related TPs 0xE000

1-9-2 Memory test points

Memory structure initialization (Public interface) 0xE001

SPD Data processing (Public interface) 0xE002

Memory conguration (Public interface) Phase 1 0xE003

DRAM initialization 0xE004

ProcMemSPDChecking 0xE005

ProcMemModeChecking 0xE006

Speed and TCL conguration 0xE007

ProcMemSpdTiming 0xE008

ProcMemDramMapping 0xE009

ProcMemPlatformSpecicCong 0xE00A

ProcMemPhyCompensation 0xE00B

ProcMemStartDcts 0xE00C

ProcMemBeforeDramInit (Public interface) 0xE00D

ProcMemPhyFenceTraining 0xE00E

ProcMemSynchronizeDcts 0xE00F

ProcMemSystemMemoryMapping 0xE010

ProcMemMtrrConguration 0xE011

ProcMemDramTraining 0xE012

ProcMemBeforeAnyTraining(Public interface) 0xE013

1-9-3 PMU Test Points

ABL Mem - PMU - Before PMU Firmware load 0xE014

ABL Mem - PMU - After PMU Firmware load 0xE015

ABL Mem - PMU Populate SRAM Timing 0xE016

ABL Mem - PMU Populate SRAM Cong 0xE017

ABL Mem - PMU Write SRAM Msg Block 0xE018

ABL Mem - Wait for Phy Cal Complete 0xE019

ABL Mem - Phy Cal Complete 0xE01A

ABL Mem - PMU Start 0xE01B

ABL Mem - PMU Started 0xE01C

ABL Mem - PMU Waiting for Complete 0xE01D

ABL Mem - PMU Stage Dec Init 0xE01E

ABL Mem - PMU Stage Training Wr Lvl 0xE01F

ABL Mem - PMU Stage Training Rx En 0xE020

ABL Mem - PMU Stage Training Rd Dqs 0xE021

ABL Mem - PMU Stage Traning Rd 2D 0xE022

- 85 - BIOS Setup

ABL Mem - PMU Stage Training Wr 2D 0xE023

ABL Mem - PMU Queue Empty 0xE024

ABL Mem - PMU US message Start 0xE025

ABL Mem - PMU US message End 0xE026

ABL Mem - PMU Complete 0xE027

ABL Mem - PMU - After PMU Training 0xE028

ABL Mem - PMU - Before Disable PMU 0xE029

1-9-4 Original Post Code

ProcMemTransmitDqsTraining 0xE02A

ABL Mem - Start write sweep 0xE02B

ABL Mem - Set Transmit DQ delay 0xE02C

ABL Mem - Write test pattern 0xE02D

ABL Mem - Read Test pattern 0xE02E

ABL Mem - Compare Test pattern 0xE02F

ABL Mem - Update results 0xE030

ABL Mem - Start Find passing window 0xE031

ABL Mem - ProcMemMaxRdLatencyTraining 0xE032

ABL Mem - Start sweep 0xE033

ABL Mem - Set delay 0xE034

ABL Mem - Write test pattern 0xE035

ABL Mem - Read Test pattern 0xE036

ABL Mem - Compare Test pattern 0xE037

ABL Mem - Online Spare init 0xE038

ABL Mem - Chip select Interleave Init 0xE039

ABL Mem - Node Interleave Init 0xE03A

ABL Mem - Channel Interleave Init 0xE03B

ABL Mem - ECC initialization 0xE03C

ABL Mem - Platform Specic Init 0xE03D

ABL Mem - Before callout for "AgesaReadSpd" 0xE03E

ABL Mem - After callout for "AgesaReadSpd" 0xE03F

ABL Mem - Before optional callout "AgesaHookBeforeDramInit" 0xE040

ABL Mem - After optional callout "AgesaHookBeforeDramInit" 0xE041

ABL Mem - Before optional callout "AgesaHookBeforeDQSTraining" 0xE042

ABL Mem - After optional callout "AgesaHookBeforeDQSTraining" 0xE043

ABL Mem - Before optional callout "AgesaHookBeforeDramInit" 0xE044

ABL Mem - After optional callout "AgesaHookBeforeDramInit" 0xE045

ABL Mem - After MemDataInit 0xE046

ABL Mem - Before InitializeMCT 0xE047

ABL Mem - Before LV DDR3 0xE048

ABL Mem - Before InitMCT 0xE049

BIOS Setup - 86 -

ABL Mem - Before OtherTiming 0xE04A

ABL Mem - Before UMAMemTyping 0xE04B

ABL Mem - Before SetDqsEccTmgs 0xE04C

ABL Mem - Before MemClr 0xE04D

ABL Mem - Before On DIMM Thermal 0xE04E

ABL Mem - Before DMI 0xE04F

ABL MEM - End of phase 3 memory code 0xE050

1-9-5 CPU test points

Entry point CPU init after training 0xE051

Exit point CPU init after training 0xE052

Entry point CPU APOB CCX map init 0xE053

Exit point CPU APOB CCX map init 0xE054

Entry point CPU Optimized boot init 0xE055

Exit point CPU Optimized boot init 0xE056

Entry point CPU APOB EDC info init 0xE057

Exit point CPU APOB EDC info init 0xE058

1-9-6 Topology test points

ProcTopologyEntry 0xE071

ProcTopologyDone 0xE07C

1-9-7 Extended memory test point

ProcMemSendMRS2 0xE080

Sedding MRS3 0xE081

Sending MRS1 0xE082

Sending MRS0 0xE083

Continuous Pattern Read 0xE084

Continuous Pattern Write 0xE085

Mem: 2d RdDqs Training begin 0xE086

Mem: Before optional callout to platform BIOS to change External

Vref during 2d Training

0xE087

Mem: After optional callout to platform BIOS to change External

Vref during 2d Training

0xE088

Congure DCT For General use begin 0xE089

Congure DCT For training begin 0xE08A

Congure DCT For Non-Explicit 0xE08B

Congure to Sync channels 0xE08C

Allocate C6 Storage 0xE08D

Before LV DDR4 0xE08E

Before LV DDR3 0xE08F

- 87 - BIOS Setup

1-9-8 Gnb Earlier init

TP0x90 0xE090

GNB earlier interface 0xE091

GNB internal debug code 0xE092

GNB internal debug code 0xE093

GNB internal debug code 0xE094

GNB internal debug code 0xE095

GNB internal debug code 0xE096

GNB internal debug code 0xE097

GNB internal debug code 0xE098

GNB internal debug code 0xE099

GNB internal debug code 0xE09A

GNB internal debug code 0xE09B

GNB internal debug code 0xE09C

GNB internal debug code 0xE09D

GNB internal debug code 0xE09E

GNB internal debug code 0xE09F

TP0xA0 0xE0A0

GNB internal debug code 0xE0A1

GNB internal debug code 0xE0A2

GNB internal debug code 0xE0A3

GNB internal debug code 0xE0A4

GNB internal debug code 0xE0A5

GNB internal debug code 0xE0A6

GNB internal debug code 0xE0A7

GNB internal debug code 0xE0A8

GNB internal debug code 0xE0A9

GNB internal debug code 0xE0AA

GNB internal debug code 0xE0AB

GNB internal debug code 0xE0AC

GNB internal debug code 0xE0AD

GNB internal debug code 0xE0AE

GNB internal debug code 0xE0AF

Abl1Begin 0xE0B0

ABL 1 Initialization 0xE0B1

ABL 1 DF Early 0xE0B2

ABL 1 DF Pre Training 0xE0B3

ABL 1 Debug Synchronization 0xE0B4

ABL 1 Error Detected 0xE0B5

ABL 1 Global memory error detected 0xE0B6

ABL 1 End 0xE0B7

BIOS Setup - 88 -

ABL 2 Begin 0xE0B8

ABL 2 Initialization 0xE0B9

ABL 2 After Training 0xE0BA

ABL 2 Debug Synchronization 0xE0BB

ABL 2 Error detected 0xE0BC

ABL 2 Global memory error detected 0xE0BD

ABL 2 End 0xE0BE

ABL 3 Begin 0xE0BF

ABL 3 Initialziation 0xE0C0

ABL 3 GMI/xGMI Initialization Stage 1 0xB1C0

ABL 3 GMI/xGMI Initialization Stage 1 Warning 0xF1C0

ABL 3 GMI/xGMI Initialization Stage 2 Error 0xE2C0

ABL 3 GMI/xGMI Initialization Stage 2 0xB2C0

ABL 3 GMI/xGMI Initialization Stage 2 Warning 0xF2C0

ABL 3 GMI/xGMI Initialization Stage 2 Error 0xE3C0

ABL 3 GMI/xGMI Initialization Stage 3 0xB3C0

ABL 3 GMI/xGMI Initialization Stage 3 Warning 0xF3C0

ABL 3 GMI/xGMI Initialization Stage 3 Error 0xE4C0

ABL 3 GMI/xGMI Initialization Stage 4 0xB4C0

ABL 3 GMI/xGMI Initialization Stage 4 Warning 0xF4C0

ABL 3 GMI/xGMI Initialization Stage 4 Error 0xE5C0

ABL 3 GMI/xGMI Initialization Stage 5 0xB5C0

ABL 3 GMI/xGMI Initialization Stage 5 Warning 0xF5C0

ABL 3 GMI/xGMI Initialization Stage 5 Error 0xE6C0

ABL 3 GMI/xGMI Initialization Stage 6 0xB6C0

ABL 3 GMI/xGMI Initialization Stage 6 Warning 0xF6C0

ABL 3 GMI/xGMI Initialization Stage 6 Error 0xE7C0

ABL 3 GMI/xGMI Initialization Stage 7 0xE8C0

ABL 3 GMI/xGMI Initialization Stage 8 0xE9C0

ABL 3 GMI/xGMI Initialization Stage 9 0xF9C0

ABL 3 GMI/xGMI Initialization Stage 9 Error 0xEAC0

ABL 3 GMI/xGMI Initialization Stage 10 0xFAC0

ABL 3 GMI/xGMI Initialization Stage 10 Error 0xE0C1

Abl3ProgramUmcKeys 0xE0C2

ABL 3 DF Finial Initalization 0xE0C3

ABL 3 Execute Synchronization Function 0xE0C4

ABL 3 Debug Synchronization Function 0xE0C5

ABL 3 Error Detected 0xE0C6

ABL 3 Global memroy error detected 0xE0C7

ABL 4 Initialiation - cold boot 0xE0C8

ABL 4 Memory test - cold boot 0xE0C9

- 89 - BIOS Setup

ABL 4 APOB Initialzation - cold boot 0xE0CA

ABL 4 Finalize memory settings - cold boot 0xE0CB

ABL 4 CPU Initialize Optimized Boot - cold boot 0xE0CC

ABL 4 Gmi Pcie Training - cold boot 0xE0CD

ABL 4 Cold boot End 0xE0CE

ABL 4 Initialization - Resume boot 0xE0CF

ABL 4 Resume End 0xE0D0

ABL 4 End Cold/Resume boot 0xE0D1

ABL 2 memory initialization 0xE0D2

ABL 3 memory initialization 0xE0D3

ABL 3 End 0xE0D4

ABL 1 Enter Memory Flow 0xE0D5

Memorry ow memory clock synchronization 0xE0D6

IfAmdReadEventLogEntry 0xE0D7

Exiting from AmdReadEventLog 0xE0D8

Entry to AmdGetApicId 0xE0D9

Exiting from AmdGetApicId 0xE0DA

Entry to AmdGetPciAddress 0xE0DB

Exiting from AmdGetPciAddress 0xE0DC

Entry to AmdIdentifyCore 0xE0DD

TExiting from AmdIdentifyCore 0xE0DE

After IDS calls out to run code on an AP 0xE0DF

After IDS calls out to run code on an AP 0xE0E0

Before IDS calls out to get IDS data 0xE0E1

After IDS calls out to get IDS data 0xE0E2

Before the heap manager calls out to allocate a buffer 0xE0E3

After the heap manager calls out to allocate a buffer 0xE0E4

Before the heap manager calls out to deallocate a buffer 0xE0E5

After the heap manager calls out to deallocate a buffer 0xE0E6

Before the heap manager calls out to locate a buffer 0xE0E7

After the heap manager calls out to locate a buffer 0xE0E8

Memory ow P-State synchronization 0xE0E9

After the BSP calls out to run code on an AP 0xE0EA

Before the BSP calls out to run code on an AP 0xE0EB

After the BSP calls out to run code on an AP 0xE0EC

Before the S3 save code calls out to allocate a buffer 0xE0ED

After the S3 save code calls out to allocate a buffer 0xE0EE

Before the memory S3 save code calls out to allocate a buffer 0xE0EF

After the memory S3 save code calls out to allocate a buffer 0xE0F0

Before the memory code calls out to locate a buffer 0xE0F1

After the memory code calls out to locate a buffer 0xE0F2

BIOS Setup - 90 -

Before the memory code calls out to locate a buffer 0xE0F3

After the memory code calls out to locate a buffer 0xE0F4

Before the memory code calls out to locate a buffer 0xE0F5

After the memory code calls out to locate a buffer 0xE0F6

Before the memory code calls out to locate a buffer 0xE0F7

After the memory code calls out to locate a buffer 0xE0F8

Ready to boot event

1-9-9 PMU test points

Failed PMU training 0xE0F9

End of phase 1 memory code 0xE0FA

End of phase 2 memory code 0xE0FB

1-9-10 ABL0 test points

Abl0Begin 0xE0FC

ABL 0 End 0xE0FD

1-9-11 ABL5 test points

ABL 5 End 0xE100

sume boot 0xE101

ABL 6 End 0xE102

ABL 6 Initialization 0xE103

End of phase 1b memory code 0xE104

ABL 1b memory initialization 0xE105

ABL 6 Global memroy error detected 0xE106

ABL 1b Debug Synchronization Function 0xE107

ABL 4b Debug Synchronization Function 0xE108

AblbBegin 0xE109

Ab4bBegin 0xE10A

BSP encountered HMAC fail on APOB Header 0xE10B

ABL Eroor General ASSERT 0xE2A0

Unknown Error 0xE2A1

ABL Error Log Inig Error 0xE2A2

ABL Error for On DIMM thermal Heap allocation error 0xE2A3

ABL Error for memory test error 0xE2A4

ABL Error while executing memory test error 0xE2A5

ABL Error DDR Post Packge Repair Mem Auto Heap Alloc error 0xE2A6

ABL Error for DDR Post Package repair Apob Heap Alloc error 0xE2A7

ABL Error for DDR Post Package Repair No PPR Table Heap Aloc

error

0xE2A8

ABL Error for Ecc Mem Auto Aloc Error error 0xE2A9

ABL Error for Soc Scan Heap Aloc error 0xE2AB

- 91 - BIOS Setup

ABL Error for Soc Scan No Die error 0xE2AC

ABL Error for Nb Tech Heap Aloc error 0xE2AD

ABL Error for No Nb Constructor error 0xE2AE

ABL Error for No Tech Constructor error 0xE2AE

ABL Error for ABL1b Auto Alocation error 0xE2B0

ABL Error for ABL1b No NB Constructor error 0xE2B1

ABL Error for ABL2 No Nb Constructor error 0xE2B2

ABL Error for ABL3 Auto Allocation error 0xE2B3

ABL Error for ABL3 No Nb Constructor error 0xE2B4

ABL Error for ABL1b General error 0xE2B5

ABL Error for ABL2 General error 0xE2B6

ABL Error for ABL3 General error 0xE2B7

ABL Error for Get Target Speed error 0xE2B8

ABL Error for Flow P1 Family Support error 0xE2B9

ABL Error for No Valid Ddr4 Dimms error 0xE2BA

ABL Error for No Dimm Present error 0xE2BB

ABL Error for Flow P2 Family Supprot error 0xE2BC

ABL Error for Heap Deallocation for PMU Sram Msg Block error 0xE2BD

ABL Error for DDR Recovery error 0xE2BE

ABL Error for RRW Test error 0xE2BF

ABL Error for On Die Thermal error 0xE2C1

ABL Error for Heap Allocation For Dct Struct Amd Ch Def structure

error

0xE2C2

ABL Error for Heap Allocation for PMU SRAM Msg block error 0xE2C3

ABL Error for Heap Phy PLL lock Flure error 0xE2C4

ABL Error for Pmu Training error 0xE2C5

ABL Error for Failure to Load or Verify PMU FW error 0xE2C6

ABL Error for Allocate for PMU SRAM Msg Block No Init error 0xE2C7

ABL Error for Failure BIOS PMU FW Mismatch AGESA PMU FW

version error

0xE2C8

ABL Error for Deallocate for PMU SRAM Msg Block error 0xE2CA

ABL Error for Module Type Mismatch RDIMM error 0xE2CB

ABL Error for Module type Mismatch LRDIMM error 0xE2CC

ABL Error for MEm Auto NVDIM error 0xE2CD

ABL Error for Unknowm Responce error 0xE2CE

ABL Error for Over Clock Error RRW Test Results Error 0xE2CF

ABL Error for Over Clock Error PMU Training Error 0xE2D0

ABL Error for ABL1 General Error 0xE2D1

ABL Error for ABL2 General Error 0xE2D2

ABL Error for ABL3 General Error 0xE2D3

ABL Error for ABL4 General Error 0xE2D4

BIOS Setup - 92 -

ABL Error over clock Mem Init Error 0xE2D5

ABL Error over clock Mem Other Error 0xE2D6

ABL Error for ABL6 General Error 0xE2D7

ABL Error Event Log Error 0xE2D8

ABL Error FATAL ABL1 Log Error 0xE2D9

ABL Error FATAL ABL2 Log Error 0xE2DA

ABL Error FATAL ABL3 Log Error 0xE2DB

ABL Error FATAL ABL4 Log Error 0xE2DC

ABL Error Slave Sync function execution Error 0xE2DD

ABL Error Slave Sync communicaton with data set to master Error 0xE2DE

ABL Error Slave broadcast communication from master to slave

Error

0xE2DF

ABL Error FATAL ABL6 Log Error 0xE2E0

ABL Error Slave Ofine Error 0xE2E1

ABL Error Slave Informs Master Error Info Error 0xE2E2

ABL Error Error Heap Locate for PMU SRAM Msg Block Error 0xE2E3

ABL Error ABL2 Auto Error 0xE2E4

ABL Error Flow P3 Family support Error 0xE2E5

ABL Error Abl 4 Gen Error 0xE2EB

ABL Error MBIST Heap Allocation Error 0xE2EC

ABL Error MBIST Results Error 0xE2EE

ABL Error NO Dimm Smcus Info Error 0xE2EE

ABL Error Por Max Freq Table Error 0xE2EF

ABL Error Unsupproted DIMM Cong Error 0xE2F0

ABL Error No Ps Table Error 0xE2F1

ABL Error Cad Bus Timing Not Found Error 0xE2F2

ABL Error Data Bus Timing Not Found Error 0xE2F3

ABL Error LrDIMM IBT Not Found Error 0xE2F4

ABL Error Unsupprote Dimm Cong Max Freq Error Error 0xE2F5

ABL Error Mr0 Not Found Error 0xE2F6

ABL Error Obt Pattern Not found Error 0xE2F7

ABL Error Rc10 Op Speed Not FOund Error 0xE2F8

ABL Error Rc2 Ibt Not Found Error 0xE2F9

ABL Error Rtt Not Found Error 0xE2FA

ABL Error Checksum ReStrt Results Error 0xE2FB

ABL Error No Chipselect Results Error 0xE2FC

ABL Error No Common Cas Latency Results Error 0xE2FD

ABL Error Cas Latecncy exceeds Taa Max Error 0xE2FE

ABL Error Nvdimm Arm Missmatch Power Policy Error 0xE2FF

ABL Error Nvdimm Arm Missmatch Power Source Error 0xE300

ABL Error ABL 1 Mem Init Error 0xE301

- 93 - BIOS Setup

ABL Error ABL 2 Mem Init Error 0xE302

ABL Error ABL 4 Mem Init Error 0xE303

ABL Error ABL 6 Mem Init Error 0xE304

ABL Error ABL 1 error repor Error 0xE305

ABL Error ABL 2 error repor Error 0xE306

ABL Error ABL 3 error repor Error 0xE307

ABL Error ABL 4 error repor Error 0xE308

ABL Error ABL 6 error repor Error 0xE30A

ABL Error message slave sync function execution Error 0xE30B

ABL Error slave ofine Error 0xE30C

ABL Error Sync Master Error 0xE30D

ABL Error Slave Informs Master Info Message Error 0xE30E

ABL Error General Assert Error 0xE30F

ABL Error No Dimms On Any Channel in sysem 0xE310

ABL Alert PMU Major Message captured 0xE311

ABL Alert PMU REsults Rx Timing captured 0xE312

ABL Alert PMU REsults Tx Timing captured 0xE313

ABL Alert PMU REsults Rx Vref captured 0xE314

ABL Alert PMU REsults Tx Vref captured 0xE315

EndAgesas 0xEFFF

BIOS Setup - 94 -

1-10 Agesa POST Codes

1-10-1 Universal Post Code

Universal ACPI entry 0xA001

Universal ACPI exit 0xA002

Universal ACPI abort 0xA003

Universal SMBIOS entry 0xA004

Universal SMBIOS exit 0xA005

Universal SMBIOS abort 0xA006

1-10-2 [0xA1XX] For CZ only memory Postcodes

Memory structure initialization (Public interface) 0xA101

SPD Data processing (Public interface) 0xA102

Memory conguration (Public interface) 0xA103

DRAM initialization 0xA104

TpProcMemSPDChecking 0xA105

TpProcMemModeChecking 0xA106

Speed and TCL conguration 0xA107

TpProcMemSpdTiming 0xA108

TpProcMemDramMapping 0xA109

TpProcMemPlatformSpecicCong 0xA10A

TPProcMemPhyCompensation 0xA10B

TpProcMemStartDcts 0xA10C

(Public interface) 0xA10D

TpProcMemPhyFenceTraining 0xA10E

TpProcMemSynchronizeDcts 0xA10F

TpProcMemSystemMemoryMapping 0xA110

TpProcMemMtrrConguration 0xA111

TpProcMemDramTraining 0xA112

(Public interface) 0xA113

TpProcMemWriteLevelizationTraining 0xA114

Below 800Mhz rst pass start 0xA115

Above 800Mhz second pass start 0xA116

Target DIMM congured 0xA117

Prepare DIMMS for WL 0xA118

Congure DIMMS for WL 0xA119

TpProcMemReceiverEnableTraining 0xA11A

Start sweep loop 0xA11B

Set receiver Delay 0xA11C

Write test pattern 0xA11D

Read test pattern 0xA11E

Compare test pattern 0xA11F

- 95 - BIOS Setup

Calculate MaxRdLatency per channel 0xA120

TpProcMemReceiveDqsTraining 0xA121

Set Write Data delay 0xA122

Write test pattern 0xA123

Start read sweep 0xA124

Set Receive DQS delay 0xA125

Read Test pattern 0xA126

Compare Test pattern 0xA127

Update results 0xA128

Start Find passing window 0xA129

TpProcMemTransmitDqsTraining 0xA12A

Start write sweep 0xA12B

Set Transmit DQ delay 0xA12C

Write test pattern 0xA12D

Read Test pattern 0xA12E

Compare Test pattern 0xA12F

Update results 0xA130

Start Find passing window 0xA131

TpProcMemMaxRdLatencyTraining 0xA132

Start sweep 0xA133

Set delay 0xA134

Write test pattern 0xA135

Read Test pattern 0xA136

Compare Test pattern 0xA137

Online Spare init 0xA138

Bank Interleave Init 0xA139

Node Interleave Init 0xA13A

Channel Interleave Init 0xA13B

ECC initialization 0xA13C

Platform Specic Init 0xA13D

Before callout for "AgesaReadSpd" 0xA13E

After callout for "AgesaReadSpd" 0xA13F

Before optional callout "AgesaHookBeforeDramInit" 0xA140

After optional callout "AgesaHookBeforeDramInit" 0xA141

Before optional callout "AgesaHookBeforeDQSTraining" 0xA142

After optional callout "AgesaHookBeforeDQSTraining" 0xA143

Before optional callout "AgesaHookBeforeDramInit" 0xA144

After optional callout "AgesaHookBeforeDramInit" 0xA145

After MemDataInit 0xA146

Before InitializeMCT 0xA147

Before LV DDR3 0xA148

BIOS Setup - 96 -

Before InitMCT 0xA149

Before OtherTiming 0xA14A

Before UMAMemTyping 0xA14B

Before SetDqsEccTmgs 0xA14C

Before MemClr 0xA14D

Before On DIMM Thermal 0xA14E

Before DMI 0xA14F

End of memory code 0xA150

Entry point S3Init 0xA151

Sending MRS2 0xA180

Sedding MRS3 0xA181

Sending MRS1 0xA182

Sending MRS0 0xA183

Continuous Pattern Read 0xA184

Continuous Pattern Write 0xA185

Mem: 2d RdDqs Training begin 0xA186

Mem: Before optional callout to platform BIOS to change External

Vref during 2d Training

0xA187

Mem: After optional callout to platform BIOS to change External

Vref during 2d Training

0xA188

Congure DCT For General use begin 0xA189

Congure DCT For training begin 0xA18A

Congure DCT For Non-Explicit 0xA18B

Congure to Sync channels 0xA18C

Allocate C6 Storage 0xA18D

Before LV DDR4 0xA18E

// BR CPU

BR before AP launch 0xA190

Install AP launched PPI 0xA191

BR after AP launch 0xA192

Before CPU PM 0xA193

Enable IO Cstate 0xA194

Enable C6 0xA195

Install CCX PEI complete PPI 0xA196

BR CPU memory done call back entry 0xA197

Before APM weights 0xA198

After APM weights 0xA199

BR CPU memory done call back end 0xA19A

BR Init Mid entry 0xA19B

BR enable APM 0xA19C

BR Init Mid install protocol 0xA19D

- 97 - BIOS Setup

BR Init Mid end 0xA19E

BR Init Late entry 0xA19F

BR Init Late install protocol 0xA1A0

BR Init Late end 0xA1A1

BR DXE install complete protocol 0xA1A2

UNB install complete PPI 0xA1A3

UNB AfterApLaunch callback entry 0xA1A4

UNB AfterApLaunch callback end 0xA1A5

1-10-3 S3 Interface Post Code

Before the S3 save code calls out to allocate a buffer 0xA1EC

After the S3 save code calls out to allocate a buffer 0xA1ED

Before the memory S3 save code calls out to allocate a buffer 0xA1EE

After the memory S3 save code calls out to allocate a buffer 0xA1EF

Before the memory code calls out to locate a buffer 0xA1F0

After the memory code calls out to locate a buffer 0xA1F1

Before the memory code calls out to locate a buffer 0xA1F2

After the memory code calls out to locate a buffer 0xA1F3

Before the memory code calls out to locate a buffer 0xA1F4

After the memory code calls out to locate a buffer 0xA1F5

Before the memory code calls out to locate a buffer 0xA1F6

After the memory code calls out to locate a buffer 0xA1F7

1-10-4 PMU Post Code

Failed PMU training 0xA1F9

1-10-5 [0xA5XX] assigned for AGESA PSP Module

// PSP V1 Modules

PspPeiV1 entry 0xA501

PspPeiV1 exit 0xA502

MemoryDiscoveredPpiCallback entry 0xA503

MemoryDiscoveredPpiCallback exit 0xA504

PspDxeV1 entry 0xA507

PspDxeV1 exit 0xA508

PspDxeV1 PspPciEnumerationCompleteCallBack entry 0xA50A

PspDxeV1 PspPciEnumerationCompleteCallBack exit 0xA50B

PspDxeV1 ready to boot entry 0xA50C

PspDxeV1 ready to boot exit 0xA50D

PspSmmV1 entry 0xA50E

PspSmmV1 exit 0xA50F

PspSmmV1 SwSmiCallBack entry, build the S3 save area for

resume

0xA510

BIOS Setup - 98 -

PspSmmV1 SwSmiCallBack exit, build the S3 save area for resume 0xA511

PspSmmV1 BspSmmResumeVector entry 0xA512

PspSmmV1 BspSmmResumeVector exit 0xA513

PspSmmV1 ApSmmResumeVector entry 0xA514

PspSmmV1 ApSmmResumeVector exit 0xA515

PspP2CmboxV1 entry 0xA516

PspP2CmboxV1 exit 0xA517

// PSP V2 Modules

PspPeiV2 entry 0xA521

PspPeiV2 exit 0xA522

PspDxeV2 entry 0xA523

PspDxeV2 exit 0xA524

PspDxeV2 PspMpServiceCallBack entry 0xA525

PspDxeV2 PspMpServiceCallBack exit 0xA526

PspDxeV2 FlashAccCallBack entry 0xA527

PspDxeV2 FlashAccCallBack exit 0xA528

PspDxeV2 ready to boot entry 0xA529

PspDxeV2 ready to boot exit 0xA52A

PspDxeV2 exit boot serivce entry 0xA52B

PspDxeV2 exit boot serivce exit 0xA52C

PspSmmV2 entry 0xA52D

PspSmmV2 exit 0xA52E

PspSmmV2 SwSmiCallBack entry, build the S3 save area for

resume

0xA52F

PspSmmV2 SwSmiCallBack exit, build the S3 save area for resume 0xA530

PspSmmV2 BspSmmResumeVector entry 0xA531

PspSmmV2 BspSmmResumeVector exit 0xA532

PspSmmV2 ApSmmResumeVector entry 0xA533

PspSmmV2 ApSmmResumeVector exit 0xA534

PspP2CmboxV2 entry 0xA535

PspP2CmboxV2 exit 0xA536

TpPspRecoverApcbFail 0xA537

// PSP fTpm modules

PspfTpmPei entry 0xA540

PspfTpmPei exit 0xA541

PspfTpmPei memory callback entry 0xA542

PspfTpmPei memory callback exit 0xA543

PspfTpmDxe entry 0xA544

PspfTpmDxe exit 0xA545

// P2C mailbox Handling [0xA59X]

PspP2Cmbox Command SpiGetAttrib Handling entry 0xA591

- 99 - BIOS Setup

PspP2Cmbox Command SpiSetAttrib Handling entry 0xA592

PspP2Cmbox Command SpiGetBlockSize Handling entry 0xA593

PspP2Cmbox Command SpiReadFV Handling entry 0xA594

PspP2Cmbox Command SpiWriteFV Handling entry 0xA595

PspP2Cmbox Command SpiEraseFV Handling entry 0xA596

PspP2Cmbox Command Handling exit 0xA59E

PspP2Cmbox Command Handling Fail exit 0xA59F

// C2P mailbox Handling

PSP C2P mailbox entry base [0xA5BX | Cmd] 0xA5B0

Before send C2P command MboxBiosCmdDramInfo 0xA5B1

Before send C2P command MboxBiosCmdSmmInfo 0xA5B2

Before send C2P command MboxBiosCmdSleep SxInfo 0xA5B3

Before send C2P command MboxBiosCmdRsmInfo 0xA5B4

Before send C2P command MboxBiosCmdQueryCap 0xA5B5

Before send C2P command MboxBiosCmdBootDone 0xA5B6

Before send C2P command MboxBiosCmdClearS3Sts 0xA5B7

Before send C2P command MboxBiosCmdS3DataInfo 0xA5B8

Before send C2P command MboxBiosCmdNop 0xA5B9

Before send C2P command MboxBiosCmdHSTIQuery 0xA5C4

Before send C2P command MboxBiosCmdClrSmmLock 0xA5C7

Before send C2P command MboxBiosCmdPcieInfo 0xA5C8

Before send C2P command MboxBiosCmdGetVersion 0xA5C9

PSP C2P mailbox exit base [0xA5DX | Cmd] 0xA5D0

Wait C2P command MboxBiosCmdDramInfo nished 0xA5D1

Wait C2P command MboxBiosCmdSmmInfo nished 0xA5D2

Wait C2P command MboxBiosCmdSleep SxInfo nished 0xA5D3

Wait C2P command MboxBiosCmdRsmInfo nished 0xA5D4

Wait C2P command MboxBiosCmdQueryCap nished 0xA5D5

Wait C2P command MboxBiosCmdBootDone nished 0xA5D6

Wait C2P command MboxBiosCmdClearS3Sts nished 0xA5D7

Wait C2P command MboxBiosCmdS3DataInfo nished 0xA5D8

Wait C2P command MboxBiosCmdNop nished 0xA5D9

Wait C2P command MboxBiosCmdHSTIQuery nished 0xA5E4

Wait C2P command MboxBiosCmdClrSmmLock nished 0xA5C7

Wait C2P command MboxBiosCmdPcieInfo nished 0xA5C8

Wait C2P command MboxBiosCmdGetVersion nished 0xA5C9

// fTPM command Handling [0xA5FX]

PspfTpm send TPM command entry 0xA5F0

PspfTpm send TPM command exit 0xA5F1

PspfTpm receive TPM command entry 0xA5F2

PspfTpm receive TPM command exit 0xA5F3

BIOS Setup - 100 -

1-10-6 [0xA9XX, 0xAAXX] assigned for AGESA NBIO Module

// NbioBase

AmdNbioBase PEIM driver entry 0xA900

AmdNbioBase PEIM driver exit 0xA901

AmdNbioBase DXE driver entry 0xA902

AmdNbioBase DXE driver exit 0xA903

// PCIe

AmdNbioPcie PEIM driver entry 0xA904

AmdNbioPcie PEIM driver exit 0xA905

AmdNbioPcie DXE driver entry 0xA906

AmdNbioPcie DXE driver exit 0xA907

// GFX

AmdNbioGfx PEIM driver entry 0xA908

AmdNbioGfx PEIM driver exit 0xA909

AmdNbioGfx DXE driver entry 0xA90A

AmdNbioGfx DXE driver exit 0xA90B

// IOMMU

AmdNbioIommu DXE driver entry 0xA90C

AmdNbioIommu DXE driver exit 0xA90D

// ALIB

AmdNbioALIB DXE driver entry 0xA90E

AmdNbioALIB DXE driver exit 0xA90F

// SMU

AmdSmuV8 PEIM driver entry 0xA910

AmdSmuV8 PEIM driver exit 0xA911

AmdSmuV8 DXE driver entry 0xA912

AmdSmuV8 DXE driver exit 0xA913

AmdSmuV9 PEIM driver entry 0xA914

AmdSmuV9 PEIM driver exit 0xA915

AmdSmuV9 DXE driver entry 0xA916

AmdSmuV9 DXE driver exit 0xA917

AmdSmuV10 PEIM driver entry 0xA918

AmdSmuV10 PEIM driver exit 0xA919

AmdSmuV10 DXE driver entry 0xA91A

AmdSmuV10 DXE driver exit 0xA91B

// IOMMU PEIM

AmdNbioIommu PEIM driver entry 0xA920

AmdNbioIommu PEIM driver exit 0xA921

// APCB DXE

APCB DXE Entry 0xA922

APCB DXE Exit 0xA923

- 101 - BIOS Setup

// APCB SMM

APCB SMM Entry 0xA924

APCB SMM Exit 0xA925

// [0xA950, 0xA99F] NBIO PPI/PROTOCOL Callback

NbioTopologyCongureCallback entry 0xA950

NbioTopologyCongureCallback exit 0xA951

MemoryCongDoneCallbackPpi entry 0xA952

MemoryCongDoneCallbackPpi exit 0xA953

DxioInitializationCallbackPpi entry 0xA954

DxioInitializationCallbackPpi exit 0xA955

DispatchSmuV9Callback entry 0xA956

DispatchSmuV9Callback exit 0xA957

DispatchSmuV10Callback entry 0xA958

DispatchSmuV10Callback exit 0xA959

AmdPcieMiscInit Event entry 0xA95A

AmdPcieMiscInit Event exit 0xA95B

NbioBaseHookReadyToBoot Event entry 0xA95C

NbioBaseHookReadyToBoot Event exit 0xA95D

NbioBaseHookPciIO Event entry 0xA95E

NbioBaseHookPciIO Event exit 0xA95F

// [0xA980, 0xA99F] BR GNB Task

GnbEarlyInterfaceCZ entry 0xA970

GnbEarlyInterfaceCZ exit 0xA971

PcieCongurationInit entry 0xA972

PcieCongurationInit exit 0xA973

GnbEarlierInterfaceCZ entry 0xA974

GnbEarlierInterfaceCZ exit 0xA975

PcieEarlyInterfaceCZ entry 0xA976

PcieEarlyInterfaceCZ exit 0xA977

PciePostEarlyInterfaceCZ entry 0xA978

PciePostEarlyInterfaceCZ exit 0xA979

GfxCongPostInterfaceCZ entry 0xA97A

GfxCongPostInterfaceCZ exit 0xA97B

GfxPostInterfaceCZ entry 0xA97C

GfxPostInterfaceCZ exit 0xA97D

GnbPostInterfaceCZ entry 0xA97E

GnbPostInterfaceCZ exit 0xA97F

PciePostInterfaceCZ entry 0xA980

PciePostInterfaceCZ exit 0xA981

GnbEnvInterfaceCZ entry 0xA982

GnbEnvInterfaceCZ exit 0xA983

BIOS Setup - 102 -

GfxCongEnvInterface entry 0xA984

GfxCongEnvInterface exit 0xA985

GfxEnvInterfaceCZ entry 0xA986

GfxEnvInterfaceCZ exit 0xA987

GfxMidInterfaceCZ entry 0xA988

GfxMidInterfaceCZ exit 0xA989

GfxIntInfoTableInterfaceCZ entry 0xA98A

GfxIntInfoTableInterfaceCZ exit 0xA98B

PcieMidInterfaceCZ entry 0xA98C

PcieMidInterfaceCZ exit 0xA98D

GnbMidInterfaceCZ entry 0xA98E

GnbMidInterfaceCZ exit 0xA98F

GnbSmuMidInterfaceCZ entry 0xA990

GnbSmuMidInterfaceCZ exit 0xA991

InvokeAmdInitLate entry 0xA992

InvokeAmdInitLate exit 0xA993

GnbSmuServiceRequestV8 entry 0xA994

GnbSmuServiceRequestV8 exit 0xA995

1-10-7 [0xACXX] assigned for AGESA CCX Module

CCX IDS IDS_HOOK_CCX_AFTER_AP_LAUNCH 0xAC10

CCX PEI entry 0xAC50

CCX downcore entry 0xAC51

CCX DXE entry 0xAC55

CCX MP service callback entry 0xAC56

CCX Read To Boot callback entry 0xAC57

CCX SMM entry 0xAC5D

CCX PEI start to launch APs for S3 0xAC70

CCX PEI end of launching APs for S3 0xAC71

CCX start to launch AP 0xAC90

CCX launch AP is ended 0xAC91

CCX launch AP abort 0xAC92

CCX MP service abort 0xAC93

CCX cac weights 0xAC94

CCX PEI exit 0xACE0

CCX downcore exit 0xACE1

CCX DXE exit 0xACE5

CCX MP service callback exit 0xACE6

CCX Read To Boot callback exit 0xACE7

CCX SMM exit 0xACED

- 103 - BIOS Setup

1-10-8 [0xADXX] assigned for AGESA DF Module

DF PEI entry 0xAD50

DF DXE entry 0xAD55

DF Ready to Boot entry 0xAD56

DF PEI exit 0xADE0

DF DXE exit 0xADE5

DF Ready to Boot exit 0xADE6

1-10-9 [0xAFXX] assigned for AGESA FCH Module

FCH InitReset dispatch point 0xAF01

FCH InitEnv dispatch point 0xAF06

FCH InitMid dispatch point 0xAF07

FCH InitLate dispatch point 0xAF08

FCH InitS3Early dispatch point 0xAF0B

FCH InitS3Late dispatch point 0xAF0C

FCH InitS3Early dispatch nished 0xAF0D

FCH InitS3Late dispatch nished 0xAF0E

FCH Pei Entry 0xAF10

FCH Pei Exit 0xAF11

FCH MultiFch Pei Entry 0xAF12

FCH MultiFch Pei Exit 0xAF13

FCH Dxe Entry 0xAF14

FCH Dxe Exit 0xAF15

FCH MultiFch Dxe Entry 0xAF16

FCH MultiFch Dxe Exit 0xAF17

FCH Smm Entry 0xAF18

FCH Smm Exit 0xAF19

FCH Smm Dispatcher Entry 0xAF20

FCH Smm Dispatcher Exit 0xAF21

FCH InitReset HwAcpi 0xAF40

FCH InitReset AB Link 0xAF41

FCH InitReset LPC 0xAF42

FCH InitReset SPI 0xAF43

FCH InitReset eSPI 0xAF44

FCH InitReset SD 0xAF45

FCH InitReset eMMC 0xAF46

FCH InitReset SATA 0xAF47

FCH InitReset USB 0xAF48

FCH InitReset xGbE 0xAF49

FCH InitReset HwAcpiP 0xAF4F

FCH InitEnv HwAcpi 0xAF50

BIOS Setup - 104 -

FCH InitEnv AB Link 0xAF51

FCH InitEnv LPC 0xAF52

FCH InitEnv SPI 0xAF53

FCH InitEnv eSPI 0xAF54

FCH InitEnv SD 0xAF55

FCH InitEnv eMMC 0xAF56

FCH InitEnv SATA 0xAF57

FCH InitEnv USB 0xAF58

FCH InitEnv xGbE 0xAF59

FCH InitEnv HwAcpiP 0xAF5F

FCH InitMid HwAcpi 0xAF60

FCH InitMid AB Link 0xAF61

FCH InitMid LPC 0xAF62

FCH InitMid SPI 0xAF63

FCH InitMid eSPI 0xAF64

FCH InitMid SD 0xAF65

FCH InitMid eMMC 0xAF66

FCH InitMid SATA 0xAF67

FCH InitMid USB 0xAF68

FCH InitMid xGbE 0xAF69

FCH InitLate HwAcpi 0xAF70

FCH InitLate AB Link 0xAF71

FCH InitLate LPC 0xAF72

FCH InitLate SPI 0xAF73

FCH InitLate eSPI 0xAF74

FCH InitLate SD 0xAF75

FCH InitLate eMMC 0xAF76

FCH InitLate SATA 0xAF77

FCH InitLate USB 0xAF78

FCH InitLate xGbE 0xAF79

End of TP range for FCH 0xAFFF

Last dened AGESA PCs 0xFFFF

- 105 - BIOS Setup

1-11 BIOS POST Beep code (AMI standard)

1-11-1 PEI Beep Codes

# of Beeps Description

1 Memory not Installed.

1 Memory was installed twice (InstallPeiMemory routine in PEI Core called

twice)

2 Recovery started

3DXEIPL was not found

3DXE Core Firmware Volume was not found

4Recovery failed

4S3 Resume failed

7 Reset PPI is not available

1-11-2 DXE Beep Codes

# of Beeps Description

1 Invalid password

4 Some of the Architectural Protocols are not available

5 No Console Output Devices are found

5 No Console Input Devices are found

6 Flash update is failed

7 Reset protocol is not available

8 Platform PCI resource requirements cannot be met

BIOS Setup - 106 -

1-12 BIOS Recovery Instruction

The system has an embedded recovery technique. In the event that the BIOS becomes corrupt the boot block

can be used to restore the BIOS to a working state. To restore your BIOS, please follow the instructions listed

below:

Recovery Instruction:

1. Change xxx.ROM to amiboot.rom.

2. Copy amiboot.rom and AFUDOS.exe to USB diskette.

3. Setting BIOS Recovery jump to enabled status.

4. Boot into BIOS recovery.

5. Run Proceed with ash update.

6. BIOS update.