Grundig 43 VLX 7710 BP User Manual
Displayed below is the user manual for 43 VLX 7710 BP by Grundig which is a product in the TVs category. This manual has pages.
Related Manuals
ENGLISH
2
Detailed instruction manual
You can find the detailed
instructions at www.grundig.de
under “Service”.
2 EU directives
3 About your TV set
3 Intended use
3 Safety
4 Environmental information
5 Packing contents
6 Setting up or hanging
7 Connections
7 Control elements
8 Inserting batteries into the remote
control
8 Setting up the TV set
8 Adding new TV stations at a later
point
8 Sorting TV stations in the channel list
9 Remote control
10 Favourites lists
10 Zapping function
10 HbbTV
11 Recording from digital TV stations
11 Watching TV with time shift
12 Media player
12 SMART inter@ctive TV 4.0+
12 Web browser
13 Product data sheet
14 Licence
14 Network interfaces
14 Cleaning the TV set
14 Abbreviations
Table of Contents
EU directives
This product complies with the
following EU directives:
2014 / 53 / EU 2014/30/
EC, 2014/35/EC, 2009/125/ EC,
2017/1369/EU and 2011/65/EU.
TV’s wireless system can only be used in
the countries below.
AT, BE, BG, CH, CY, CZ, DE, DK,
EE, ES, FI, FR, GB, GR, HU, IE,
IS, IT, LI, LT, LU, LV, MT, NL, NO,
PL, PT, RO, SE, SI, SK, HR, TR.
The use the 5150 -5350 MHz band is
restricted to indoor use only. (For Wi-Fi/
Bluetooth built-in model or Wi-Fi Built-in
model).
This device can also be operated in the
countries outside Europe.
Electromagnetic noise
7
Devices connected to the product
(satellite receiver, DVD player, and etc.)
or signal emitting devices (router and
etc.) close to the product may cause
disturbance in the image and noise in the
sound.
7
Connection cables used on the product
must be shorter than 3 m.
7
If the product cannot perform its function
due to electrostatic discharge, the user
may need to switch off and then switch on
the product.
7
A shielded, HDMI-certified and ferrite
cable must be used with the product.
3
ENGLISH
About your TV set
7 With your TV set, you can receive and
watch digital TV programmes over DVB-
S, DVB-T and DVB-C, along with ana-
logue TV.
7 Many features of the TV set require an In-
ternet connection. The TV set is equipped
with WLAN and a LAN port.
7
The TV set can record TV programmes.
For this feature you need a USB storage
device, such as an external hard drive
(not included). Recorded TV programmes
can only be played on the same TV set.
After the TV st is repaired, it is possible
that recorded programmes may no longer
be able to be played back.
Intended use
7 The TV set is designed for use in dry
rooms.
7 Use the TV set with the supplied stand or
a suitable VESA bracket.
7 The TV set is primarily intended for the
playback of TV programmes, streaming
content and audio/video material from
external devices. Any other use is strictly
prohibited.
It is not intended as an information
display or for predominant use as a
computer monitor. If a still image or a
non-full-format image is displayed for
an extended period, visible traces may
remain on the screen for some time.
This is not a defect that can be used as
the basis for a warranty claim.
Safety
WARNING
Risk of electrical accident
7 Do not open the TV set. Safety risk may
arise and also the guarantee of the
product can be void if the television set is
opened.
7 The TV set can only be operated with the
power cable or the AC/DC adapter sup-
plied with the product.
7 Do not operate the TV set with a dam-
aged power cord/AC/DC adaptor (if
supplied).
7 If the plug on the TV set has an earthing
contact, only insert the plug into a socket
with an earthing contact.
7 Plug the TV set into the mains socket only
after you have connected the external
devices and the antenna.
7 Protect the TV set from moisture. Do not
place any vessels filled with water (such
as vases) on the TV.
Fire hazard
7 To prevent the spread of fire,
keep candles or other open
flames away from this product
at all times.
7 Do not cover the ventilation slots on the
TV set.
7 Always unplug the power plug and an-
tenna plug during a thunderstorm.
7 Keep candles or other open flames away
from the TV set.
7 Do not expose the batteries to extreme
heat such as sunshine, fire or the like.
7 Only use batteries of the same type
(brand, size, properties). Do not use used
and new batteries together.
ENGLISH
4
WARNING
Injuries caused by falling TV set
Never place the TV set on an unstable sur-
face. The TV set may fall, causing serious
injury, possibly leading to death in isolated
cases.
Observe the following precautions:
7 Only use the manufacturer’s recommend-
ed cabinets or stands.
7 Only use furniture that can safely support
the TV set.
7 Make sure that the TV set does not
protrude beyond the dimensions of the
furniture on which it is resting.
7 Do not place the TV set on tall furniture
(such as kitchen cabinets, bookshelves)
without securely anchoring the furniture
and TV set.
7 Do not place the TV set on fabric or other
materials located between the TV set and
furniture.
7 Instruct children that there is danger as-
sociated with climbing on furniture when
the TV set is to be reached.
NOTICE
Shortened service life due to high
operating temperature
7 Do not place the TV set next to heating
units or in direct sunlight.
7 To ensure adequate ventilation, maintain
clearance of at least 10 cm around the
TV set.
Discolouration of furniture due to
rubber feet
7 Some furniture surfaces may discolour
when they come in contact with rubber.
To protect furniture, you can place a
sheet made of glass or plastic under the
stand. Do not use textile underlays or
mats such as doilies.
Environmental information
7 Do not dispose of batteries in
the household waste. Used
batteries must be returned to
retail stores or public collection points.
You help to protect the environment in this
way.
7 Do not dispose of the product
along with normal household
waste at the end of its service
life. Take it to a recycling centre for
electrical and electronic equipment.
7 Be sure to dispose of packaging materi-
als for your product separately according
to the guidelines of local authorities so
that they can be recycled in an environ-
mentally safe manner.
7
If you are not using your TV set for a
while, turn it to standby mode. In standby
mode, the TV set uses very little energy (≤
0.5 W).
If you do not use the TV set for an ex-
tended period, turn it off with the power
switch or unplug the power cord from
the socket. If you turn off the device or
disconnect it from the power supply, the
switch-on timer and programmed record-
ings will not work.
7 Select a location for the TV set so that
no direct sunlight falls on the screen. This
allows a lower backlight to be selected,
which saves energy.
5
ENGLISH
Packing contents
Standart accessory
1. TV
2. Stand
3. Remote control
4. Batteries for remote controls
5. Screws and mounting instructions for
stand
6. Brief Instruction
Optional accessory
Easy-Use Remote Control
Batteries for Easy-Use remote controls
Cleaning cloth
VESA bracket screws
4
2
5
6
User
Manual
3
SERVICE
1
ENGLISH
6
Setting up or hanging
7 Select a location so that no direct sunlight
falls on the screen.
Setting up with stand
7 To mount the stand, refer to the installa-
tion instructions included.
7 Place the TV set on a hard, level surface.
Preparing for mounting on the
VESA bracket
You will need:
7 A pair of scissors,
7 A crosstip screwdriver.
Follow the installation instructions for the
VESA bracket.
1. Place the TV set in the film on a smooth
surface with the screen facing down.
2. Cut open the film on the back side us-
ing the scissors.
3. Connect the required cables to the con-
nectors on the TV set. See the “Connec-
tions” section in this manual.
4. Tie the cables so they do not hang
down onto the floor.
5. Screw the VESA bracket onto the TV set
and mount it according to its installation
instructions.
SERVICE
VESA
7
ENGLISH
Connections
SERVICE
ANT-IN
5V max.50mA
Optic Out SATELLITE
13/18V max.500mA
LAN
CI
SERVICE
7 SERVICE: Service only.
7 Optic Out: optical audio output
7 LAN: Network connection
7 SATELLITE: for satellite antenna.
Suitable for single-cable GSCR system.
7 ANT IN: for antenna cable (terrestrial
antenna or cable connection).
7 U: Headphone jack or line output via
adapter.
7 CI: for CA modules for receiving en-
crypted stations.
7 USB 1 (HDD): connect data media
for recording programmes, such as an
external hard disk.
7 USB 2: USB socket for external data medi-
um and PVR function.
7 HDMI1: Input for digital audio and im-
age data.
7 HDMI2: Input for digital audio and im-
age data.
Control elements
Turning the TV to standby
1. 8/I Switches the television on and back
into standby mode.
ENGLISH
8
Inserting batteries into the
remote control
1. Open the battery compartment.
2. Insert batteries as marked on the
bottom of the battery compartment
(2 × Micro/R03/AAA).
3. Close the battery compartment.
Setting up the TV set
1. Connect the cables.
2. Insert the power plug into the socket.
3. Switch on the power switch.
4. Switch on the TV set with on the
remote control.
5. Follow the setup wizard on the screen.
Adding new TV stations at
a later point
1. Press .
2. Select »Settings«.
3. Select »Source«.
4. Select »Automatic Channel Search«.
5. Select the antenna type.
6. The next procedure depends on the
selected antenna. Follow the instructions
on the screen.
Sorting TV stations in the
channel list
1. Press .
2. Press .
3. Choose the TV station you want to
move, and highlight it with .
4. Press .
5. Use the navigation keys to move the TV
station to the new position and confirm
with .
9
ENGLISH
Remote control
Cursor Control
Moves the cursor up and
down in the menus.
Moves the cursor left/right in
menus.
Opens channel list;
activates various functions.
Turns on and off the
television set (stand-by)
Signal source
Turns volume on/off (mute)
Zapping function;
switches the menus back
one menu level
Opens the menu
Opens the Tools menu
Switches between teletext
and TV modes
Opens MyApps menu
Switches on from standby;
selects stations step by step
Adjusts the volume
Displays information
Exits menu and applica-
tions
Opens the channel list
Opens the electronic TV
guide
Switches on from standby
mode;
selects channels directly
Selects the channel list
(»ALL«, »FAV 1« to
»FAV 4«)
Record, playback, pause
or stop (only digital televi-
sion channels);
teletext on half screen
Opens Screen share.
No function
Functions according to the
screen help, HbbTV
Opens Media Player menu
Select subtitle
Select audio channel
Next/previous image/
chapter, next/previous
track
ENGLISH
10
HbbTV
HbbTV is the interactive successor to tele-
text, with content in modern design, high-
resolution images and video sequences.
For full functionality of HbbTV, the TV must
be connected to the Internet.
After you switch to a TV station that offers
HbbTV, a corresponding message appears.
1. Turn on HbbTV with the colour key
that appears after you switch to the TV
station.
Favourites lists
You can organise TV and radio stations in
favourites lists.
Saving a station to the favou-
rites list
1. Press .
2. Press .
3. Select the favourites list and confirm
with .
Opening the favourites list
1. Press .
2. Select the favourites list and confirm
with .
– Now only stations that are stored in the
selected favourites lists are available.
Zapping function
This function allows you to save a station to
which you want to return during frequent
changes of the station (zapping).
1. Press to save the current station.
2. Select other stations (zapping).
3. Press to switch to the
station on which was most recently
pressed.
4. terminates the function.
11
ENGLISH
7 In order to reliably record programmes
in HD, connect a fast data medium with
a USB3.0 connection to the USB1
(HDD) ports.
7 For one hour of recording, you need 2.6
to 6.6 GB of storage space.
7 Recorded programmes can only be
played back on the same TV set.
Watching TV with time shift
For this function, you need an external data
medium.
1. Press to pause the current pro-
gramme.
2. Press to continue the programme.
3. Press / for fast rewind/fast
forward.
4. Press to return to the current
programme.
Tips
7 The time shift can be up to one hour.
7 The option of watching TV with time shift
may be restricted by the station.
7 By default, rewinding is only possible up
to the point where you pressed .
You can set the TV set so that you can
rewind by up to an hour:
1. Press .
2. Select »Settings«.
3. Select »TV«.
4. Select »Advanced«.
5. Select »Permanent Time Shift« and
switch it on with .
6. Press .
Recording from digital TV
stations
Recording and playback of TV pro-
grammes can only be carried out using an
external data medium (hard drive or USB
stick).
Direct recording
1. Press to record the current pro-
gramme.
2. Press to stop recording.
Programming a recording
1. Press to display the programme
guide.
2. Select the required programme.
3. Press to programme the recording
of the broadcast.
Editing the list of scheduled
recordings
1. Press .
2. Select »Schedule List«.
Tips
7 To start the recording, switch the TV set
to the corresponding station. A few sec-
onds before the station is switched, a
message appears. You can cancel the
switching and the recording select »No«
with or and pressing .
7 The option of recording and playback
of recordings may be limited by the sta-
tion provider.
7 External hard drives that require ≥ 500
mA of current may only be connected to
sockets USB1 (HDD).
ENGLISH
12
SMART inter@ctive TV 4.0+
SMART inter@ctive TV offers apps that al-
low you to conveniently use various Internet
services.
Opening Application Center
1. Press on the remote control.
2. Select the app and launch it with .
Opening All Apps
1. In the »Aplication Center« menu, select
the »All Apps« option on the top right.
Web browser
Launching the web browser
1. Press .
2. On the menu bar, select the »Web
Browser« option.
Media player
The media player displays images and
plays recorded programmes, films and mu-
sic. Films, music and images can be stored
on a connected USB device or be provided
by a DLNA media server.
Playing media
1. Press .
2. Select media source. To play TV record-
ings on the external data medium,
select »PVR«.
3. To display image or music files: Select
on the top left, then »All«, »Music« or
»Photos«.
4. Navigate to the file or recording and
press .
Tips
7 When playing films and images, press
on the remote control to display
buttons.
7 Music can be played with images. Dur-
ing the playback of images, press
and select .
7 Films can be played with subtitles. The
file name of the subtitle file must be iden-
tical to the file name of the film file. Both
files must be in the same folder. Subtitles
in the format .SRT, .SUB, .ASS, .SSA,
.SMI are supported.
Turning on the display of subtitles:
1. During playback of a film, press .
2. Select Subtitles with .
3. Enable subtitles with .
13
ENGLISH
GRUNDIG 43 VLX 7710 BP
Product data sheet
Energy efficiency class
A
Screen diagonal
108 cm/43 inch
Power consumption
Operation 69,1 W/100 W max.
Standby 0.30 W
Networked standby 2.90 W
Annual power consumption
101 kWh
Maximum resolution
3840 × 2160
Additional information
Operating voltage:
220 … 240 V~, 50 … 60 Hz
Screen (dm²)
50 dm²
RoHS limits
Pb (lead)/Hg (mercury)
Pb concentration complies with RoHS limits/
0 mg
Peak luminance ratio
65%
Audio output
2 × 20 W music power
2 × 10 W sine power + 10 W sine power of
the subwoofer
The subwoofer is optional and therefore not
available on all products.
Default satellites
20
LNB power supply
13/18 V, 14/19 V optional, maximum 500
mA
LNB switching signal
0/22 kHz 650 mV +/- 250 mVpp
DiSEqC
1.0-operation, 1.1-operation, 1.2-operation
Digital reception ranges
Satellite
Ku band: 10,700 MHz … 12,750 MHz
Modulation: DVBS QPSK, DVBS2 QPSK, 8
PSK
IF band: 950 MHz … 2150 MHz
Signal level: –25 dBm … –65 dBm
Cable
Overall band: 110 MHz … 862 MHz
Modulation: 16 QAM, 32 QAM,64 QAM,
128 QAM and 256 QAM
Symbol rate: 4.0 Msym/s … 7.2 Msym/s
Terrestrial (DVB-T)
VHF/UHF-Band, bandwidth 7 MHz and 8
MHz
FFT size: 2 k, 8 k
Modulation: 16 QAM, 64 QAM, QPSK
Guard interval: 1/4, 1/8, 1/16, 1/32
Terrestrial (DVB-T2)*
VHF/UHF-Band, bandwidth 7 MHz and 8
MHz
FFT size: 1 k, 2 k, 4 k, 8 k, 16 k, 32 k
Modulation: 16 QAM, 64 QAM,
256 QAM, QPSK
Guard interval: 1/4, 19/256, 1/8, 19/128,
1/16, 1/32, 1/128
* DVB-T2 is optional and therefore not avail-
able on all products.
Analogue reception ranges
C02 … C80, special channels S01 … S41
Preset channels
TV/Radio 6000 (satellite – DVB-S),
1000 (cable – DVB-C)
or 99 (analogue)
1000 (terrestrial – DVB-T) or
99 (analogue)
2 AV, 2 USB
Supported media files
Image files: jpg/jpe, bmp, png
Music files: m4a, wma, aac
Video files: mov, xvid, mpg, mpe, vob,
dat, trp, ts, avi, mp4, mkv
Weight
approx. 9 kg
Dimensions
W × H × D 97,6 cm × 58,2 cm × 7,4 cm
Technical changes and errors reserved.
ENGLISH
14
Cleaning the TV set
Pull the power cord out of the mains socket.
Clean the appliance with a damp cloth and
a mild detergent. Do not use any deter-
gents containing alcohol, spirit, ammonia
or scouring agent.
Use a damp, soft cloth to clean the screen.
Do not use water with soap or detergent.
Abbreviations
7 AV: Audio/video.
7 CAM: Module for receiving encrypted
TV channels.
7 CI: Slot for modules for receiving en-
crypted TV channels.
7 DLNA: Organisation that develops stan-
dards for networking home devices and
certifies devices and software.
7 GSCR: Grundig Sat Channel Router.
Technology that allows multiple TVs to be
connected to a satellite antenna using a
single-cable system.
7 HbbTV: Standard for information and ser-
vices that are offered with the TV signal
as well as by the Internet, an additional
service offered by some broadcasting
stations.
7 HD: Collective term for high-resolution
audio/video data, usually 720 or 1080
lines.
7 HDMI: Connection for high-resolution
digital audio/video data.
7 LAN: local area network.
7 VESA: Organisation that has developed
a standard for the attachment of screens.
7 WLAN: wireless local area network.
Licence
EN
For DTS patents, see http://patents.dts.
com. Manufactured under license from DTS
Licensing Limited. DTS,
the Symbol, DTS and the Symbol together,
and DTS Premium Sound are registered
trademarks or trademarks of DTS, Inc. in
the United States and/or other countries. ©
DTS, Inc. All Rights Reserved.
Dolby, Dolby Audio, and the double-D
symbol are trademarks of Dolby
Laboratories.
Explanation of the symbols
which may be present on back
side of the television set
Class II or Double insula-
tion. Television set doesn’t
require connection to
electrical earth (ground).
Alternating current. The set
works only with AC line
voltage in your household
electricity.
Direct current. The set
works only with AC/DC
adapter.
Network interfaces
This product is intended for connection to
the ADSL network.