Hoover SM156DPN 001 User Manual
Displayed below is the user manual for SM156DPN 001 by Hoover which is a product in the Handheld Vacuums category. This manual has pages.
Related Manuals
®
USER MANUAL
1 2
3 4
B
C
D
E
F
I
J
A
L
K
G
H
M*
N*
5 6
8
7
9
2
1
1
INSTRUCTIONS FOR SAFE USE
This appliance should only be used for domestic cleaning, as described
in this user guide. Please ensure that this guide is fully understood before
operating the appliance.
Always switch o and remove the charger from the socket before cleaning
the appliance or any maintenance task.
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
If the power cord is damaged stop using the appliance immediately. To avoid a
safety hazard, an authorised Hoover service engineer must replace the power cord.
Never touch the charger with wet hands.
Use only the original charger supplied with the appliance.
Check that your supply voltage is the same as that stated on the charger.
Never charge the batteries in temperatures above 37°C or below 0°C.
Plug the charger in to suitable socket outlet and connect the charger cable
to the [H] Charger Base. Ensure the product on/o switch button is at the
“OFF” position, place the cleaner into the charger base, ensuring the shroud
covers the back of the product.
For the cleaner with LED Display *. The charging LED indicator** will ash to
advise that the product is charging. When the product is fully charged and is
still positioned on the charger base, the icon will stop ashing and remain lit.
For the cleaner without LED Display*. The charging LED indicator** will illuminate
red all the time to advise that the product is charging. When the product is fully
charged and is still positioned on the charger base, the red led will remain on.
Before rst use, charge your cleaner for at least 24 hours. Do return the
appliance to the charger base after use to recharge the batteries. When
charging the cleaner, the power switch must be o. If the operating time
reduces after repeated use, let the cleaner run until it stops, then recharge
for 24 hours and repeat this monthly for best results.
It is normal for the charger to become warm to the touch when charging.
Use only attachments, consumables or spares recommended or supplied by Hoover.
Do not pick up hard or sharp objects, matches, hot ashes, cigarette ends or
other similar items.
Do not spray with or pick up ammable liquids, cleaning uids, aerosols or
their vapours.
GB
*certain models only ** May vary according to model
2
Do not continue to use your appliance or charger if it appears faulty.
Hoover service: To ensure the continued safe and ecient operation of this
appliance we recommend that any servicing or repairs are only carried out
by an authorised Hoover service engineer.
Do not use the appliance to clean animals or people.
Keep hands, feet, loose clothing and hair away from rotating brushes.
Do frequently clean the dust cup and lter assembly.
Do not unplug the charger by pulling on the power cord.
Unplug the charger in the event of prolonged absence (holidays, etc.).
Recharge appliance again before use as batteries may self discharge over
increased periods of storage.
Static electricity: Some carpets can cause a small build up of static
electricity. Any static discharge is not hazardous to health.
Do not use your appliance out of doors or on any wet surface or for wet
pickup.
Do not replace the batteries with non-rechargeable batteries.
End of Product Life Battery Disposal
If the appliance is to be disposed of the batteries must rst be removed. The
appliance must be disconnected from the supply mains when removing the
battery. Dispose of the batteries safely. Used batteries should be taken to a
recycling station and not disposed of with household waste. To remove the
batteries, please contact the Hoover Customer Centre or proceed according
to the following instructions.
IMPORTANT: Always fully discharge the batteries before removal.
Run the cleaner until the batteries are completely empty.
Remove the front cover and top cover from the unit. Unscrew 7 screws and
open the unit. Unscrew 6 screws and open the battery pack. Disconnect the
cables and remove the batteries. Remove the wires which connect to the
batteries one by one to make sure no short circuit.
NOTE: Should you experience any diculty in dismantling the unit or for
more detailed information on treatment, recovery and recycling of this
appliance, please contact your local city oce or your household waste
disposal service.
GB
3
FEATURES
STORAGE/CHARGING
UNIT STORAGE
The product is designed to sit in the charging base on a at surface or vertically if wall mounted. [1]
For tidy storage wrap excess cord on the back of the charging base and exit either side or bottom.
To Wall Mount (Tools required: Screwdriver and drill)
1. Place the cardboard ruler against the mounting surface. Mark the centres of the holes.
2. Move base then drill 4.8mm holes.
3. Fit wall plugs.
4. Position base into the insert screws, and move down to ensure the base is xed rmly to the wall.
CHARGING & LED INDICATOR**
Ensure the product on/o switch** button is at the “OFF” position, then place the cleaner into the base, ensuring the shroud covers
the back of the product.
For the cleaner with LED Display *. The charging LED indicator** will ash to advise that the product is charging. When the product
is fully charged and is still positioned on the charger base, the icon will stop ashing and remain lit.
For the cleaner without LED Display *. The charging LED indicator** will illuminate red all the time to advise that the product is
charging. When the product is fully charged and is still positioned on the charger base, the red led will remain on.
NOTE: Use only the charger supplied with your cleaner to recharge the unit.
IMPORTANT: Before rst use, charge your cleaner for at least 24 hours. When charging the cleaner, the power switch must be
o. It is normal for the charger to become warm to the touch when charging. If the operating time reduces after repeated use,
let the cleaner run until it stops, then recharge for 24 hours and repeat this monthly for best results. Never charge the batteries in
temperatures above 37°C or below 0°C.
HOW TO USE
1. Remove the cleaner from the storage base.
2. Push the switch** to ‘ON’ position to begin cleaning and to turn o move the switch** to the ‘OFF’ position.
3.
For the cleaner with Power Nozzle*, push the switch** to “1” position to begin cleaning and to turn o move the switch** to the
“0” position, push the switch** to “Power No
zzle Ic
on ” to turn on the power nozzle.
4. Empty and clean the unit and lter after each use.
5. To empty the bin pull the bin open trigger, the dust bin ap will open and stop about 45 °position for debris to empty easily. [2]
IMPORTANT: For best results clean the lter after each use.
A On/O Switch**
B LED Display*
C LED Charging Indicator**
D Removable Crevice Tool
E Suction Inlet
F Power Nozzle*
G Dust Bin Flap
H Charger Base
I Cardboard Ruler
J Charger
K Dust Brush
L Dust Bin Open Trigger
M Flexible Hose*
N Crevice Brush*
This cleaner is equipped with a LED display. When the product is on, the display will report following information:
Battery Level Indicator*:
• 4 bars = 100% charge
• 3 bars = 75% charge
• 2 bars = 50% charge
• 1 bar = 25% charge
• 0 bar <= 5% charge
LED DISPLAY*
GB
*certain models only ** May vary according to model
4
1. Pull the trigger and the dust bin ap will open automatically. [7]
2. Rotate and remove the lter. [8]
3. The container may be cleaned using a wet cloth.
4. The lter should be washed in hand warm water DO NOT USE DETERGENTS. Make sure all are completely dry before replacing
in your cleaner.
5. Replace the lter into the dust container and close the dust container ap.
End of Product Life Battery Disposal
If the cleaner is to be disposed of the b
atteries should be removed. Used batteries should be taken to a recycling station and not
disposed with household waste.
IMPORTANT: Always fully discharge the batteries before removal.
Battery removal [9]
Rem
ove the front cover and top cover from the unit. Unscrew 7 screws and open the unit. Unscrew 6 screws and open the battery
pack. Disconnect the cables and remove the batteries.
NOTE: Should you experience any diculties in dismantling the unit or for more detailed information about treatment, recovery and
recy
cling of this product, please contact your local city oce, your household waste disposal service.
IMPORTANT INFORMATION
Hoover spares and Consumables
Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. When
ordering parts always quote your model number.
Cloth Filter S103 35601645
Microber Filter S105 35601646
The Environment:
The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed
over to the appliance collection point for recycling of electrical and electronic equipment.
Disposal must be carried out in
accordance with the local environmental regulations for waste disposal. For more detailed information about treatment,
recovery and recycling of this product, please contact your local city oce, your household waste disposal service or the
shop where you purchased the product.
This product complies with the European Directives 2006/95/EC, 2004/108/EC and 2011/65/EC.
HOOVER Limited Pentrebach, Merthyr Tydl, Mid Glamorgan CF48 4TU
FILTER MAINTENANCE
Removable Crevice Tool
Fit the crevice tool onto the dust cup to clean corners and hard to reach areas. [3]
Dust Brush
Fit the dust brush onto the dust cup to clean keyboards and other delicate areas. [4]
Power Nozzle*
To use t onto the container. Ideal for deep cleaning textile surfaces (i.e. sofas) and pet hair removal. Move it steadily backwards and
forwards. Do not keep the power nozzle stationary while the brush is rotating. [5]
To clean – Detach nozzle from the container and then remove hair/threads collected on the brush with scissors if necessary.
Crevice Brush*
Insert one end of exible hose into the Suction Inlet,and attach the Crevice Brush to the other end of the exible hose. [6]
ATTACHMENTS
YOUR GUARANTEE
The guarantee conditions for this appliance are as dened by our representative in the country in which it is sold.
Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased.
The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.
Subject to change without notice.
GB
*certain models only ** May vary according to model
PRINTED IN P.R.C
48016145
®