HP 1040 G6 User Manual

User Guide

© Copyright 2019 HP Development Company,

Bluetooth is a trademark owned by its

proprietor and used by HP Inc. under license.

Intel, Celeron, Pentium, and Thunderbolt are

trademarks of Intel Corporation or its

subsidiaries in the U.S. and/or other countries.

Lync, Oice 365, Skype, and Windows are

express warranty statements accompanying

such products and services. Nothing herein

should be construed as constituting an

additional warranty. HP shall not be liable for

technical or editorial errors or omissions

contained herein.

First Edition: July 2019

Document Part Number: L66195-001

Product notice

This user guide describes features that are

common to most models. Some features may

not be available on your computer.

Not all features are available in all editions or

To access the latest user guides, go to

http://www.hp.com/support, and follow the

instructions to nd your product. Then select

User Guides.

Software terms

By installing, copying, downloading, or

otherwise using any software product

preinstalled on this computer, you agree to be

bound by the terms of the HP End User License

Agreement (EULA). If you do not accept these

license terms, your sole remedy is to return the

entire unused product (hardware and software)

Safety warning notice

WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the

computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, at

surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as

pillows or rugs or clothing, to block airow. Also, do not allow the AC adapter to come into contact with the

skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter

Processor conguration setting (select products only)

IMPORTANT: Select computer products are congured with an Intel® Pentium® N35xx/N37xx series or a

Celeron® N28xx/N29xx/N30xx/N31xx series processor and a Windows® operating system. If your computer

is congured as described, do not change the processor conguration setting in mscong.exe from 4 or 2

processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory

reset to restore the original settings.

2 Components .................................................................................................................................................. 3

Locating hardware ................................................................................................................................................. 3

Locating software .................................................................................................................................................. 3

Right ....................................................................................................................................................................... 4

Left ......................................................................................................................................................................... 5

Display .................................................................................................................................................................... 7

Keyboard area ........................................................................................................................................................ 9

Inserting a SIM card (select products only) ......................................................................................................... 20

3 Network connections ................................................................................................................................... 21

Connecting to a wireless network ....................................................................................................................... 21

4 Navigating the screen .................................................................................................................................. 27

5 Entertainment features ............................................................................................................................... 32

6 Managing power .......................................................................................................................................... 39

Shutting down (turning o) the computer .......................................................................................................... 40

Using the Power icon and Power Options ............................................................................................................ 41

Running on battery power ................................................................................................................................... 41

Running on external power ................................................................................................................................. 43

7 Security ...................................................................................................................................................... 45

Protecting the computer ..................................................................................................................................... 45

Using passwords .................................................................................................................................................. 45

Windows Hello (select products only) ................................................................................................................. 53

Using antivirus software ...................................................................................................................................... 53

Using rewall software ........................................................................................................................................ 53

Installing software updates ................................................................................................................................. 54

Using HP Client Security (select products only) .................................................................................................. 54

Using HP Device as a Service (select products only) ........................................................................................... 54

Using an optional security cable (select products only) ..................................................................................... 54

When AC power is disconnected (battery not charging):

level. When the battery has reached a critical battery level,

the battery light begins blinking rapidly.

Thunderbolt™ ports with HP Sleep and Charge

Connect AC adapters that have a USB Type-C connector,

supplying power to the computer and, if needed, charging the

computer battery.

Connect display devices that have a USB Type-C connector,

providing DisplayPort output.

NOTE: Your computer may also support a Thunderbolt

docking station.

NOTE: Cables and/or adapters (purchased separately) may be

required.

denition television, any compatible digital or audio

component, or a high-speed High Denition Multimedia

Interface (HDMI) device.

Component Description

saving state. The computer shuts o power to the display

and other unneeded components.

power-saving state that uses the least amount of power.

(5) Security cable slot Attaches an optional security cable to the computer.

area networks (WWANs).

use your camera, see Using a camera (select products only)

on page 32. Some cameras also allow a facial recognition logon to

Windows, instead of a password logon. For more information, see

Windows Hello (select products only) on page 53.

NOTE: Camera functions vary depending on the camera hardware

Component Description

To access this guide:

Touchpad

Touchpad settings

To adjust touchpad settings and gestures, or to turn o the touchpad:

1. Type touchpad settings in the taskbar search box, and then press enter.

2. Choose a setting.

Table 2-4 Touchpad components and their descriptions

and antenna* (select products only)

Component Description

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the

Table 2-5 Lights and their descriptions

letters.

(select products only) on page 16.

(1) Speakers Produce sound.

(2) Fingerprint reader Allows a ngerprint logon to Windows, instead of a password

logon.

Hello (select products only) on page 53 for details.

IMPORTANT: To prevent ngerprint logon issues, make

NOTE: The SIM card in your computer may look slightly dierent from the illustration in this section.

This chapter will help you get connected to that world.

Connecting to a wireless network

Your computer may be equipped with one or more of the following wireless devices:

computer communicates with a wireless router or a wireless access point.

devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device

within 10 meters (approximately 33 feet) of each other.

Using the wireless controls

You can control the wireless devices in your computer using one or more of these features:

Wireless button

The computer may have a wireless button, one or more wireless devices, and one or two wireless lights. All

the wireless devices on your computer are enabled at the factory.

The wireless light indicates the overall power state of your wireless devices, not the status of individual

‒ or –

Connecting to a WLAN

Some mobile network operators require the use of a SIM card. A SIM card contains basic information about

you, such as a personal identication number (PIN), as well as network information. Some computers include

a SIM card that is preinstalled. If the SIM card is not preinstalled, it may be provided in the HP Mobile

Broadband information provided with your computer or the mobile network operator may provide it

separately from the computer.

For information about HP Mobile Broadband and how to activate service with a preferred mobile network

A Bluetooth device provides short-range wireless communications that replace the physical cable connections

that traditionally link electronic devices such as the following:

Connecting Bluetooth devices

Before you can use a Bluetooth device, you must establish a Bluetooth connection.

refer to the documentation provided with the device.

NOTE: If your device does not appear in the list, be sure that Bluetooth on that device is turned on. Some

devices may have additional requirements; refer to the documentation provided with the device.

Using NFC to share information (select products only)

Your computer supports Near Field Communication (NFC), which allows you to wirelessly share information

between two NFC-enabled devices. Information is transferred by tapping the tapping area (antenna) of the

Connecting to a local area network (LAN) (select products only)

2. Plug the other end of the network cable into a network wall jack (2) or router.

TV and radio reception, orient the circuitry end of the cable toward the computer.

Using HP LAN-Wireless Protection (select products only)

In a LAN environment, you can set HP LAN-Wireless Protection to safeguard your LAN network from

unauthorized wireless access. When HP LAN-Wireless Protection is enabled, the WLAN (Wi-Fi) or WWAN

connection is turned o when the computer is connected directly to a LAN.

Turning on and customizing HP LAN-Wireless Protection

1. Connect a network cable to the network jack on the computer, or on an optional docking device or

expansion product.

2. Start Computer Setup (BIOS).

displays all the devices installed on your computer.

Connect displays to computers with Intel graphics (with an optional hub)

display choices include Duplicate, which mirrors your computer screen on all enabled display devices, or

Extend, which extends the screen image across all enabled display devices.

NOTE: If this dialog box does not appear, be sure that each external display device is connected to the

correct port on the hub. Select the Start button, select Settings, and then select System. Under Display,

select the appropriate resolution, and then select Keep changes.

Connect displays to computers with Intel graphics (with a built-in hub)

connected to an optional docking station

connected to an optional docking station

Extend, which extends the screen image across all enabled display devices.

NOTE: If this dialog box does not appear, be sure that each external display device is connected to the

correct port on the hub. Select the Start button, select Settings, and then select System. Under Display,

select the appropriate resolution, and then select Keep changes.

Discovering and connecting to Miracast-compatible wireless displays (select

products only)

To open Miracast:

Intel WiDi, a premium Miracast solution, makes it easy and seamless to pair your secondary display device;

provides for full-screen duplication; and improves speed, quality, and scaling.

To connect to Intel WiDi certied displays:

a wireless display, and then follow the on-screen instructions.

To open Intel WiDi:

Using data transfer

Your computer is a powerful entertainment device that enables you to transfer photos, videos, and movies

from your USB devices to view on your computer.

NOTE: To connect a USB Type-C device to your computer, you need a USB Type-C cable, purchased

1. Connect one end of the USB Type-C cable to the USB Type-C port on the computer.

and conserve the battery charge.

Some power management features described in this chapter may not be available on your computer.

Using Sleep and Hibernation

CAUTION: Several well-known vulnerabilities exist when a computer is in the Sleep state. To prevent an

unauthorized user from accessing data on your computer, even encrypted data, HP recommends that you

always initiate Hibernation instead of Sleep anytime the computer will be out of your physical possession.

This practice is particularly important when you travel with your computer.

CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video playback

functionality, or loss of information, do not initiate Sleep while reading from or writing to a disc or an external

is saved to a hibernation le and the computer powers down. You can also initiate Hibernation manually.

For more information, see Initiating and exiting Hibernation (select products only) on page 40.

Initiating and exiting Sleep

You can initiate Sleep in any of the following ways:

You can exit Sleep in any of the following ways:

If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the

following emergency procedures in the sequence provided:

Battery Check indicates that your battery should be replaced, contact support.

‒ or –

Select the question mark icon in the taskbar.

2. Select Troubleshooting and xes, and then in the Diagnostics section, select HP Battery Check. If HP

Battery Check indicates that your battery should be replaced, contact support.

The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the

battery could aect your warranty coverage. If a battery is no longer holding a charge, contact support.

Running on external power

For information about connecting to external power, see the Setup Instructions poster provided in the

computer box.

Standard security features provided by the Windows operating system and the Windows Computer Setup

NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a product

from being mishandled or stolen.

NOTE: Before you send your computer for service, back up and delete condential les, and remove all

password settings.

NOTE: Some features listed in this chapter may not be available on your computer.

NOTE: Your computer supports Computrace, which is an online security-based tracking and recovery service

available in select regions. If the computer is stolen, Computrace can track the computer if the unauthorized

user accesses the Internet. You must purchase the software and subscribe to the service in order to use

Computrace. For information about ordering the Computrace software, go to http://www.hp.com.

Table 7-1 Security solutions