Indesit BTW A61052 (IT) User Manual
Displayed below is the user manual for BTW A61052 (IT) by Indesit which is a product in the Washing Machines category. This manual has pages.
Related Manuals
W111 20 062
This washing machine is equipped with automatic
safety functions which detect and diagnose faults at
an early stage and react appropriately:
H. “Service” indication
I. “Water tap closed” indication
J. “Clean pump” indication
A. Programme selector
B. “Start delay” button
C. Programme sequence indicator
Start delay indicator
D. “Spin speed” button
E. “Start/Pause” button
F. “Reset/Drain” button
G. “Lid locked” indication
Programme Care
Labels
Max.
Load
kg
Type of wash / Notes
- for temperature selection, respect the manufacturer's recommendations on the care label
Detergents and Additives Special options Max.
Spin
Speed
rpm
Pre-
wash
Main
Wash
Softener Pre-
wash
Intensive
wash
Extra
rinse
Energy
saver
Start
delay
Spin
Speed
Turn & Wash
30°C
Turn & Wash
30°C 3.5
The best daily washing solution. Particularly useful for lightly and normally
soiled textiles made of cotton or synthetic fabrics, as it washes at low
temperature and at maximum spin speed.
–Yes i– – – – i–max.
Synthetics
40°C
Sintetici
40°C 3.0
For washing soiled garments made from synthetic bres (such as polyester,
polyacrylic,
viscose, etc.) or cotton/synthetic blends.
iYes i i i i i i i max.
Cotton
40 - 60 - 90°C
Cotone
40 - 60 - 90°C max. From normally to heavily soiled and robust cottons. iYes i i i i i i i max.
Eco Cotton
40 - 60°C
Cotone Eco
40 - 60°C max.
For washing normally soiled cotton garments. At 40°c and 60°C, this is the
standard cotton programme and the most ecient in terms of water and
energy consumption.
–Yes i– – i–i i max.
Wool
20°C
Lana
20°C 1.0
All wool garments can be washed using programme “Wool“ even those carryng
the “hand-wash only“ label. For best results, use special detergents and do not
exceed max kg declaration of laundry.
–Yes i– – – – i i max.
Delicates
30°C
Delicati
30°C 1.5 For washing particularly delicate garments. Preferably turn garments inside out
before washing. –Yes i– – – i i i max.
Colours
40°C
Colorati
40°C 3.5 From lightly to normally soiled laundry made of cotton, synthetics or their
blends; also delicates. Helps preserving colours. –Yes i– – i i i i max.
Cotton
30°C
Cotone
30°C 3.5 For washing lightly soiled garments quickly. This cycle lasts only 30 minutes,
saving time and energy. –Yes i– – – i i i max.
Synthetics
30°C
Sintetici
30°C 3.0 Enshorted cycle for lightly soiled garments made from synthetic bres (such as
polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends. –Yes i– – i i i i max.
Spin + Drain Centrifuga +
Scarico –max. Separate intensive spin programme. For robust laundry. – – – – – – – i i max.
Rinse + Spin Risciacquo +
Centrifuga –max. Separate rinse and intensive spin programme. For robust laundry. – – i– – i–i i max.
Yes = dosing required / i = optional
EN PROGRAMME CHART
A
B
H
F
E
G
C
D
J
I
“Intensive wash” button
• Choose this option if you use an in-wash
additive for stain removal - it will optimize
the additive’s eciency to get better wash
performance and stain removal.
• Use with the maximum load. Add an appropriate
of in-wash additive for stain removal (powder) to
the main wash.
• May prolong the programme by up to 10
minutes. Appropriate for use of stain removers
and bleaches on oxygen basis. Chlorine or
perborate bleches must not be used!
“Extra Rinse” button
• Helps to avoid detergent residues in the laundry
by extending the rinse phase.
• Particularly suitable for washing baby laundry,
for people suering from allergies and for areas
with soft water.
“Energy Saver” button
• Saves energy used for water heating while
maintaining good wash result.
• Recomentable for lightly soiled laundry without
stains.
• Make sure that your detergent is suitable for
cold wash temperatures (15 or 20 °C).
• Mainly selectable on the lowest temperature
step of the programmes.
“Spin Speed” button
• Every programme has a predened spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the nal spinning is
cancelled but intermediate spin peaks remain
during the rinse. The water is drained out only.
START DELAY
To set the selected programme to start at a later
time, press the “Start delay” button until the
lamp for the desired delay is illuminated (1h - 3h
- 6h - 9h - 12h). The lamp for the “Start delay”
option button lights up, and it goes o when the
programme starts. Once having pressed the
“Start/Pause” button, the countdown of the time
delay begins, “Start delay” lamp blinks. Number
of hours preselected can be reduced by pressing
the “Start delay” button again. Do not use liquid
detergent when activating this option. To cancel
the “Start delay” turn the programme selector to
another position.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The blinking light next to the “Start/Pause” button
becomes constant. The programme sequence
indicator shows the current programme phase,
running from left to right through Wash, Rinse,
Spin/Drain. When the programme phase is nised,
the corresponding indication goes out.
“LID LOCKED” INDICATION
After start of a program the lamp lights up to
indicate that the lid can not be opened. As long
as a wash programme is running, the lid remains
locked and must on no account be forced open.
In case you have an urgent need to open it during
a running programme, refer to “Cancel a running
programme before the end”.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Water tap closed” -
No or not sucient inlet water.
“Service” -
Failure or malfunction of an electrical component.
“Clean pump” -
Waste water is not pumped out.
Spin speed indication blinks: unbalance during
spinning.
1.
PREPARATION OF THE WASH CYCLE
Load the washing machine, close the drum door
and check that it is closed properly.
2. Pour in the detergent and any additives, as
described overleaf and in the instruction
manual.
3. Close the lid.
4. Turn the programme selector to the desired
programme and temperature. The indicator for
the preset spin speed lights up. The indication
lamp of the predened spin speed lights up.
If you do not start the programme soon after
having made your choice, the washing machine
will switch o automatically after about a
quarter of an hour. Switch on the washing
machine again by turning the programme
selector back to “O“ and then to the desired
programme.
SELECT ANY DESIRED OPTION
When the combination of programme and
additional option(s) is not possible, the indication
lights switch o automatically. Unsuitable
combinations of options are deselected
automatically.
“Prewash” button
• Only for heavily soiled loads (for example
sand, granular dirt). Increases the cycle time by
approximately 19 min.
• Do not use liquid detergent for the main wash
when activating the Prewash option.
•
PROGRAMME END
The “Lid locked” indication lights o. After about
a quarter of an hour, the washing machine will
switch o completely to save energy.
1. Turn the programme selector to the “O”
position.
2. Close the water tap.
3. Open lid and drum and unload the machine.
4. Leave the lid open for some time to allow the
interior of the machine to dry.
1.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
Press the “Start/Pause” button to pause the
programme. The light blinks.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL A RUNNING PROGRAMME BEFORE THE END
The “Reset/Drain” button cancels a programme
before the end.
• Press the “Reset/Drain” button for at least 3
seconds. The water is drained out; it may last a
while until you can open the lid.
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with
respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer
to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
The programme duration may dier from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
Approximete remaining moisture content (%). After programme end and spinning with maximum selectable spin speed, in default programme setting.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.
Programme Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration (hrs : min) %
Turn & Wash 30 3.5 43 0.40 0:45
Synthetics 40 3.0 45 0.52 1:50 47
Cotton 40 6.0 60 0.80 3:00
64
Cotton 60 6.0 60 0.99 3:00
Cotton 90 6.0 53* 1.91 2:05
Eco Cotton ** 60 6.0 48 0.90 4:00
62
Eco Cotton ** 60 3.0 31 0.78 2:10
Eco Cotton ** 40 6.0 48 0.65 2:50
Eco Cotton ** 40 3.0 31 0.60 2:00
Wool 20 1.0 40 0.40 0:35
Delicates 30 1.5 50 0.50 0:45
Colours 40 3.5 43 0.47 0:59
Cotton 30 3.5 42 0.25 0:30
Synthetics 30 3.0 40 0.31 0:50
CONSUMPTION DATA Power consumption in o-mode 0.11 W / in left-on mode 0.11 W