Indesit BTW E71253P (IT) User Manual
Displayed below is the user manual for BTW E71253P (IT) by Indesit which is a product in the Washing Machines category. This manual has pages.
Related Manuals
W111 20 065
This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately:
M. “Service” indication
N. “Water tap closed” indication
O. “Clean pump” indication
A. Programme selector
B. Temperature, Time
C. “Start delay” button
D. Programme sequence indicator
E. “Spin” button (incl. Rinse hold)
F. “Start/Pause” button
G. “Reset/Drain” button
H. “Temperature” button
I. “Soil level” button
J. Child lock button combination
K. Detergent overdosage indication
L. “Door locked” indication
Programme Care
Labels
Max.
Load
kg
Type of wash / Notes
- for temperature selection, respect the manufacturer's recommendations on the care label
Detergents and Additives Special options Max.
Spin
Speed
rpm
Pre-
wash
Main
Wash
Softe-
ner
Easy
Ironing
Stira-
Facile
Start
delay
Partenza
Ritardata
Pre-
wash
Pre-
lavaggio
Extra
Rinse
Extra
Risciacquo
Soil
Level
Livello
di Sporco
Rinse Hold /
Spin Speed
Centrifuga
Energy
Saver
Intensive
wash
Lavaggio
Intensivo
Turn & Wash
30°C
Turn & Wash
30°C 3,5 The best daily washing solution. Particularly useful for lightly and normally soiled textiles made
of cotton or synthetic fabrics, as it washes at low temperature and a maximum spin speed. –Yes i–i– – i– – – 10001)
Synthetics
cold - 60°C
Sintetici
freddo - 60°C 3.0 For washing soiled garments made from synthetic bres (such as polyester, polyacrylic,
viscose, etc.) or cotton/synthetic blends. iYes i i i i i i i i i max.
Cotton
cold - 95°C
Cotone
freddo - 95°C max. Normally to heavily soiled and robust cottons . iYes i i i i i i i i i max.
Eco Cotton
40 - 60°C
Cotone Eco
40 - 60°C
max.
For washing normally soiled cotton garments. At 40°C and 60°C, this is the standard cotton
programme and the most ecient in terms of water and energy consumption.
- Reference programme for the Energy Label.
–Yes i–i–i i i i – max.
Mixed
cold - 40°C
Misti
freddo - 40°C max. For washing mixed fabrics garments or for mixed load of cotton and synthetics, preserving
bers. iYes i–i i i i i i – max.
Gym kit
40 - 60°C
Kit Palestra
40 - 60°C 3,5 Normally soiled and sweaty sportswear made of cotton jersey or microbers. Includes a
prewash cycle – you can add detergent also to the prewash chamber. Do not use softener. iYe s – – i i i i i i –10001)
Bed and Bath
cold - 60°C
Lenzuola e
Asciugamani
freddo - 60°C
3.5
White or coloured bed linen made of cotton and synthetic bers, or blends of both. Reduces
microbes and gently cleans, also delicate bed linen. A thorough rinse phase helps to prevent
detergent and pollen residues. Prefer powder detergent for this programme.
iYes i i i i i i i i – max.
Wool
20°C
Lana
20°C 1.0
All wool garments can be washed using programme “Wool“ even those carrying the
“hand-wash only“ label. For best results, use special detergents and do not exceed max kg
declaration of laundry.
–Yes i–i– – i i – – 10001)
Delicates
30°C
Delicati
30°C 1.5 For washing particularly delicate garments. Preferably turn garments inside out before washing. –Yes i–i– – i i i –10001)
Colours
40°C
Colorati
40°C 3,5 From lightly to normally soiled laundry made of cotton, synthetics or their blends; also
delicates. Helps preserving colours. –Yes i i i –i i i i – max.
Cotton
30°C
Cotone
30°C 3.5 For washing lightly soiled garments quickly. This cycle lasts only 30 minutes, saving time and
energy –Yes i–i– – i i i – max.
Synthetics
30°C
Sintetici
30°C 3.0 Enshorted cycle for lightly soiled garments made from synthetic bres (such as polyester,
polyacrylic, viscose, etc.) or cotton/synthetic blends. –Yes i–i–i i i i – max.
Rinse + Spin Risciacquo +
Centrifuga –max. Separate rinse and intensive spin programme. For robust laundry. – – i–i–i–i– – max.
Spin + Drain Risciacquo +
Scarico –max. Separate intensive spin programme. For robust laundry. – – – – i– – – –/i – – max.
1200
1000
400
A
B
M
I
G
F
L
H
D
EC
O
K
N
J
EN PROGRAMME CHART
Yes = dosing required / i = optional
1) For improved garment care, spin speed is restricted in these programmes.
“Prewash” button
• Only for heavily soiled loads (for example sand, granular
dirt). Increases the cycle time by approximately 19 min.
Do not use liquid detergent for the main wash when
activating the Prewash option.
“Extra Rinse” button
• Helps to avoid detergent residues in the laundry by
extending the rinse phase. Particularly suitable for
washing baby laundry, for people suering from allergies
and for areas with soft water.”
“Soil Level” button
• Soil level is an option working on 3 dierent levels (Heavy,
Mid and Low) that are specially designed to set the right
washing action, depending on your cleaning needs:
-Heavy: high levels of dirtiness, removing most stubborn
stains.
-Mid: everyday stains.
-Low: lightly soiled stains.
“Rinse Hold/ Spin Speed” button
• Every programme has a predened spin speed.
• Press the button to set another spin speed.
• If you select spin speed “0”, the nal spinning is cancelled
and the water is drained out only. However, intermediate
spin phases remain during the rinse.
• If you select “Rinse hold”, the laundry remains in the last
rinse water without progressing to the nal spin cycle,
to avoid creasing and prevent colours from changing. To
activate the “Rinse hold”, press the “Spin” button repeatedly
until the “Rinse hold” symbol on the display lights up.
-The wash programme stops to “Rinse hold” when the “Rinse
hold” symbol on the display blinks; the light of “Start/
Pause” button also blinks.
-To terminate the “Rinse hold” by spinning the laundry, press
“Start/Pause” - the laundry will be spun with the default
spin speed. You can also select another spin speed with the
“Spin” button before you start the spin cycle by pressing
“Start/Pause”.
-To terminate the “Rinse hold” by draining the water without
spinning, press the “Spin” button until spin speed “0”
appears on the display; then press “Start/Pause” to start
the draining. Do not leave the laundry to soak for too long
in the “Rinse hold” (especially silk).
“Energy Saver” button
• Saves energy used for water heating while maintaining
good wash result.
• Recomentable for lightly soiled laundry without stains.
• Make sure that your detergent is suitable for cold wash
temperatures (15 or 20 °C).
• Mainly selectable on the lowest temperature step of the
programmes.
“Intensive wash” button
• Choose this option if you use an in-wash additive for stain
removal - it will optimize the additive’s eciency to get
better wash performance and stain removal.
• Use with the maximum load. Add an appropriate of
in-wash additive for stain removal (powder) to the main
wash
• May prolong the programme by up to 10 minutes.
Appropriate for use of stain removers and bleaches on
oxygen basis. Chlorine or perborate bleches must not be
used!
START DELAY
To set the selected programme to start at a later time, press
the “Start delay” button to set the desired delay time. The
lamp for the “Start delay” option button lights up, and it
goes o when the programme starts. Once having pressed
the “Start/Pause” button, the countdown of the time delay
begins. The time delay indication on the display disappears
when the programme starts and it is replaced by the
remaining programme time. Number of hours preselected
can be reduced by pressing the “Start delay” button again.
Do not use liquid detergent when activating this option. To
cancel the “Start delay” turn the programme selector to
another position.
PROGRAMME START
Open the tap and press the “Start/Pause” button. The
blinking light next to the “Start/Pause” button becomes
constant. The programme sequence indicator shows the
current programme phase, running from left to right through
Wash, Rinse, Spin/Drain. When the programme phase is
nised, the corresponding indication goes out.
1.
PREPARATION OF THE WASH CYCLE
Load the washing machine, close the drum door and
check that it is closed properly.
2. Pour in the detergent and any additives, as described
overleaf and in the instruction manual.
3. Close the lid.
4. Turn the programme selector to the desired programme.
The display shows the duration of the selected
programme (in hours and minutes), and the indicator
for the “Start/Pause” button ashes. The temperature
and spin speed can be changed by pressing the
“Temperature” and “Rinse Hold/Spin Speed” buttons.
After the end of a programme, or when a programme is
selected but not yet started, the washing machine will
therefore switch o automatically after about a quarter of
an hour. To switch the washing machine on again, turn the
programme selector to “O” and afterwards to the desired
programme again
SELECT ANY DESIRED OPTION
When the combination of programme and additional
option(s) is not possible, the indication lights switch o
automatically. Unsuitable combinations of options are
deselected automatically.
“Easy Ironing” button
• By selecting this option, the wash and the spin cycles will
be modied in order to reduce the formation of creases.
“DOOR LOCKED” INDICATION
After start of a program the lamp lights up to indicate that
the lid can not be opened. As long as a wash programme
is running, the lid remains locked and must on no account
be forced open. In case you have an urgent need to open
it during a running programme, refer to “Cancel a running
programme before the end”.
CHILD LOCK BUTTONS
You can lock the buttons of the control panel against
improper use (e.g. by children).
• Press both of the child lock buttons simultaneously and
hold them for at least 3 seconds. The key symbol on the
display lights up.
• To unlock the buttons again: proceed in the same way.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Water tap closed” - No or not sucient inlet water.
“Service” - Failure or malfunction of an electrical component.
“Clean pump” - Waste water is not pumped out.
Spin speed on display blinks: unbalance during spinning
•
PROGRAMME END
The “Door locked” indication lights o and the display
shows “End”. After about a quarter of an hour, the washing
machine will switch o completely to save energy.
1. Turn the programme selector to the “O” position.
2. Close the water tap.
3. Open lid and drum and unload the machine.
4. Leave the lid open for some time to allow the interior of the
machine to dry.
DETERGENT OVERDOSAGE INDICATION
The symbol will light up at the end of the programme if you
used too much detergent. Use less detergent next time. If the
symbol lights up and the display shows “Fod”, too much foam
interrupted the wash process; refer to the “Troubleshooting
Guide” in your Instructions for use.
1.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
Press the “Start/Pause” button to pause the programme.
The light blinks.
2. Select the new programme, temperature, any options and
another spin speed if you want.
3. Press the “Start/Pause” button again. The new programme
continues at the same position where the previous
programme was interrupted. Do not add detergent for this
programme.
CANCEL A RUNNING PROGRAMME BEFORE THE END
The “Reset/Drain” button cancels a programme before the end.
• Press the “Reset/Drain” button for at least 3 seconds. The
water is drained out; it may last a while until you can open
the lid.
Programme Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration (hrs : min) %
Turn & Wash 30 3.5 43 0.40 0:45
Synthetics 60 3.0 54* 0.89 2:05 40
Synthetics 40 3.0 50 0.56 1:50
Cotton 95 7.0 58* 2.10 2:35
64Cotton 60 7.0 52 1.33 2:35
Cotton 40 7.0 64 0.99 3:00
Eco Cotton ** 60 7.0 48 0.90 4:00
62
Eco Cotton ** 60 3.5 34 0.75 2:50
Eco Cotton ** 40 7.0 48 0.75 2:45
Eco Cotton ** 40 3.5 34 0.65 2:30
Mixed 40 7.0 55 0.80 2:00
Gym kit 40 3.5 57 0.75 1:30
Bed and Bath 60 3.5 55 1.10 2:00
Wool 20 1.0 40 0.10 0:35
Delicate 30 1.5 50 0.50 0:45
Colours 40 3.5 40 0.47 0:59
Cotton 30 3.5 42 0.25 0:30
Synthetics 30 3.0 40 0.31 0:50
CONSUMPTION DATA Power consumption in o-mode 0.11 W / in left-on mode 0.11 W
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with
respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer
to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
The programme duration may dier from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
Approximate remaining moisture content (%). After programme end and spinning with maximum selectable spin speed, in default programme setting.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.