Intel 11 Pro User Manual
Displayed below is the user manual for 11 Pro by Intel which is a product in the PC/Workstation Barebones category. This manual has pages.
Related Manuals
1
NUC11TNK
User Guide – November 2021
Intel® NUC 11 Pro Kit NUC11TNKi3
Intel® NUC 11 Pro Kit NUC11TNKi5
Intel® NUC 11 Pro Kit NUC11TNKv5
Intel® NUC 11 Pro Kit NUC11TNKi7
Intel® NUC 11 Pro Kit NUC11TNKv7
Intel® NUC 11 Pro Kit NUC11TNKi30Z
Intel® NUC 11 Pro Kit NUC11TNKi50Z
Intel® NUC 11 Pro Kit NUC11TNKv50Z
Intel® NUC 11 Pro Kit NUC11TNKi70Z
User Guide
November 2021
2
NUC11TNK
User Guide – November 2021
You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products
described herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject
matter disclosed herein.
No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.
All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel product
specifications and roadmaps.
The products described may contain design defects or errors known as errata which may cause the product to deviate from published
specifications. Current characterized errata are available on request.
Copies of documents which have an order number and are referenced in this document may be obtained by calling 1-800-548-4725 or by
visiting: http://www.intel.com/design/literature.htm.
Intel technologies' features and benefits depend on system configuration and may require enabled hardware, software or service activation.
Performance varies depending on system configuration. No computer system can be absolutely secure.
Intel and the Intel logo are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2021, Intel Corporation. All rights reserved.
3
NUC11TNK
User Guide – November 2021
Contents
1.0 Introduction ............................................................................................................................. 5
1.1 Before You Begin ........................................................................................................................................... 5
1.2 Installation Precautions ............................................................................................................................. 6
1.3 Observe Safety and Regulatory Requirements ......................................................................... 6
2.0 Open the Chassis ................................................................................................................... 7
3.0 Install and Remove System Memory ......................................................................... 8
3.1 Install SO-DIMMs........................................................................................................................................... 8
3.2 Remove SO-DIMMs ...................................................................................................................................... 9
4.0 Install an M.2 SSD ...............................................................................................................10
5.0 Close the Chassis .................................................................................................................12
6.0 Use the VESA Bracket (Optional) ...............................................................................13
7.0 Connect Power ......................................................................................................................15
8.0 Install an Operating System .........................................................................................17
9.0 Install the Latest Device Drivers and Software ................................................18
4
NUC11TNK
User Guide – November 2021
Revision History
Date
Revision
Description
November 2021
3.0
Added “Z” product models.
January 2021
2.0
Minor corrections.
January 2021
1.0
Initial release.
5
NUC11TNK
User Guide – November 2021
1.0 Introduction
This User Guide provides step-by-step installation instructions for these products:
• Intel® NUC 11 Pro Kit NUC11TNKi3
• Intel® NUC 11 Pro Kit NUC11TNKi5
• Intel® NUC 11 Pro Kit NUC11TNKv5
• Intel® NUC 11 Pro Kit NUC11TNKi7
• Intel® NUC 11 Pro Kit NUC11TNKv7
• Intel® NUC 11 Pro Kit NUC11TNKi30Z
• Intel® NUC 11 Pro Kit NUC11TNKi50Z
• Intel® NUC 11 Pro Kit NUC11TNKv50Z
• Intel® NUC 11 Pro Kit NUC11TNKi70Z
1.1 Before You Begin
CAUTIONS
The steps in this guide assume you’re familiar with computer terminology and
with the safety practices and regulatory compliance required for using and
modifying computer equipment.
Disconnect the computer from its power source and from any network before
performing any of the steps described in this guide.
Failure to disconnect power, telecommunications links, or networks before you open
the computer or perform any procedures can result in personal injury or equipment
damage. Some circuitry on the board can continue to operate even though the front
panel power button is off.
Follow these guidelines before you begin:
• Always follow the steps in each procedure in the correct order.
• Create a log to record information about your computer, such as model,
serial numbers, installed options, and configuration information.
• Electrostatic discharge (ESD) can damage components. Perform the
procedures described in this chapter only at an ESD workstation using an
antistatic wrist strap and a conductive foam pad. If such a station isn’t
available, you can provide some ESD protection by wearing an antistatic wrist
strap and attaching it to a metal part of the computer chassis.
6
NUC11TNK
User Guide – November 2021
1.2 Installation Precautions
When you install and test the Intel NUC, observe all warnings and cautions in the
installation instructions.
To avoid injury, be careful of:
• Sharp pins on connectors
• Sharp pins on circuit boards
• Rough edges and sharp corners on the chassis
• Hot components (such as SSDs, processors, voltage regulators, and heat sinks)
• Damage to wires that could cause a short circuit
Observe all warnings and cautions that instruct you to refer computer servicing
to qualified technical personnel.
1.3 Observe Safety and Regulatory Requirements
If you don’t follow these instructions, you increase your safety risk and the possibility
of noncompliance with regional laws and regulations.
7
NUC11TNK
User Guide – November 2021
2.0 Open the Chassis
Unscrew the four corner screws on the bottom of the chassis and lift the cover.
8
NUC11TNK
User Guide – November 2021
3.0 Install and Remove System Memory
Intel® NUC 11 Pro Kits NUC11TNK have two 260-pin DDR4 SO-DIMM memory slots
Memory requirements:
• 1.2V low voltage memory
• 2133/2400/3200 MHz SO-DIMMs
• Non-ECC
Find compatible system memory modules at the Intel® Product Compatibility Tool:
• Intel® NUC 11 Pro Kit NUC11TNKi3
• Intel® NUC 11 Pro Kit NUC11TNKi5
• Intel® NUC 11 Pro Kit NUC11TNKv5
• Intel® NUC 11 Pro Kit NUC11TNKi7
• Intel® NUC 11 Pro Kit NUC11TNKv7
• Intel® NUC 11 Pro Kit NUC11TNKi30Z
• Intel® NUC 11 Pro Kit NUC11TNKi50Z
• Intel® NUC 11 Pro Kit NUC11TNKv50Z
• Intel® NUC 11 Pro Kit NUC11TNKi70Z
3.1 Install SO-DIMMs
If you plan to install just one SO-DIMM, install it in the lower memory socket.
To install the SO-DIMMs, follow these steps:
1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer. Turn off the
computer and disconnect the AC power cord.
3. Align the small notch at the bottom edge of the SO-DIMM with the key in
the socket.
4. Insert the bottom edge of the SO-DIMM into the socket.
5. When the SO-DIMM is inserted, push down on the outer edge of the
9
NUC11TNK
User Guide – November 2021
SO-DIMM until the retaining clips snap into place. Make sure the clips
are firmly in place.
3.2 Remove SO-DIMMs
To remove a SO-DIMM, follow these steps:
1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer. Turn off the
computer.
3. Remove the AC power cord from the computer.
4. Remove the computer’s cover.
5. Gently spread the retaining clips at each end of the SO-DIMM socket. The
SO-DIMM pops out of the socket.
6. Hold the SO-DIMM by the edges, lift it away from the socket, and
store it in an anti-static package.
7. Reinstall and reconnect any parts you removed or disconnected to reach the
SO-DIMM sockets.
8. Replace the computer’s cover and reconnect the AC power cord.
10
NUC11TNK
User Guide – November 2021
4.0 Install an M.2 SSD
Intel® NUC 11 Pro Kits NUC11TNK support 80mm and 42mm SSDs.
Find compatible M.2 SSDs at the Intel® Product Compatibility Tool:
• Intel® NUC 11 Pro Kit NUC11TNKi3
• Intel® NUC 11 Pro Kit NUC11TNKi5
• Intel® NUC 11 Pro Kit NUC11TNKv5
• Intel® NUC 11 Pro Kit NUC11TNKi7
• Intel® NUC 11 Pro Kit NUC11TNKv7
• Intel® NUC 11 Pro Kit NUC11TNKi30Z
• Intel® NUC 11 Pro Kit NUC11TNKi50Z
• Intel® NUC 11 Pro Kit NUC11TNKv50Z
• Intel® NUC 11 Pro Kit NUC11TNKi70Z
If you’re installing an 80mm M.2 SSD:
1. Remove the small silver screw from the 80mm metal standoff on the
motherboard (A).
2. Align the small notch at the bottom edge of the M.2 card with the key in the
connector.
3. Insert the bottom edge of the M.2 card into the connector (B).
4. Secure the card to the standoff with the small silver screw (C).
If you’re installing a 42mm M.2 SSD:
1. Remove the small silver screw from the metal standoff on the motherboard (A).
2. Move the standoff (B) from the 80mm position to the 42mm position (C).
3. Align the small notch at the bottom edge of the M.2 card with the key in the
connector.
11
NUC11TNK
User Guide – November 2021
4. Insert the bottom edge of the M.2 card into the connector (D).
5. Secure the card to the standoff with the small silver screw (E).
12
NUC11TNK
User Guide – November 2021
5.0 Close the Chassis
After all components have been installed, close the Intel NUC chassis. Intel
recommends this be done by hand with a screwdriver to avoid over-tightening and
possibly damaging the screws.
13
NUC11TNK
User Guide – November 2021
6.0 Use the VESA Bracket (Optional)
Follow these instructions to attach and use the VESA mount bracket:
1. Using the four small black screws that were included in the box, attach the
VESA bracket to the back of the monitor or TV.
2. Attach the two slightly larger black screws to the bottom chassis cover of the
Intel NUC.
14
NUC11TNK
User Guide – November 2021
3. Slide the Intel NUC onto the VESA mount bracket.
15
NUC11TNK
User Guide – November 2021
7.0 Connect Power
Each Intel NUC model includes either a region-specific AC power cord or no AC power
cord (only the power adapter).
Product codes
Power cord type
BNUC11TNKv70000
BNUC11TNKi70000
BNUC11TNKv50000
BNUC11TNKi50000
BNUC11TNKi30000
BNUC11TNKi30Z00
BNUC11TNKi50Z00
BNUC11TNKv50Z00
BNUC11TNKi70Z00
No power cord included. An AC power cord needs to
be purchased separately. Power cords are available at
many Internet sites for use in multiple countries. The
connector on the power adapter is a C5 type
connector.
BNUC11TNKv70001
BNUC11TNKi70001
BNUC11TNKv50001
BNUC11TNKi50001
BNUC11TNKi30001
BNUC11TNKi30Z01
BNUC11TNKi50Z01
BNUC11TNKi70Z01
US power cord included.
BNUC11TNKv70002
BNUC11TNKi70002
EU power cord included.
16
NUC11TNK
User Guide – November 2021
BNUC11TNKv50002
BNUC11TNKi50002
BNUC11TNKi30002
BNUC11TNKi30Z02
BNUC11TNKi50Z02
BNUC11TNKi70Z02
17
NUC11TNK
User Guide – November 2021
8.0 Install an Operating System
See Supported Operating Systems for a list of Intel-validated Windows* operating
systems.
The Intel Product Compatibility Tool lists versions of Linux* that have been reported
as compatible by Intel NUC owners. If you need assistance with Linux on your Intel
NUC, check the distribution’s website and forums for peer assistance.
Refer to Operating System Installation for system requirements and installation steps.
18
NUC11TNK
User Guide – November 2021
9.0 Install the Latest Device Drivers and Software
Here are the options for keeping device drivers current:
• Allow the Intel® Driver & Support Assistant (Intel® DSA) to detect out-of-
date drivers
• Manually download drivers, BIOS, and software from Download Center:
▪ Intel® NUC 11 Pro Kit NUC11TNKi3
▪ Intel® NUC 11 Pro Kit NUC11TNKi5
▪ Intel® NUC 11 Pro Kit NUC11TNKv5
▪ Intel® NUC 11 Pro Kit NUC11TNKi7
▪ Intel® NUC 11 Pro Kit NUC11TNKv7
▪ Intel® NUC 11 Pro Kit NUC11TNKi30Z
▪ Intel® NUC 11 Pro Kit NUC11TNKi50Z
▪ Intel® NUC 11 Pro Kit NUC11TNKv50Z
▪ Intel® NUC 11 Pro Kit NUC11TNKi70Z