iStorage datAshur Personal User Manual

Displayed below is the user manual for datAshur Personal by iStorage which is a product in the USB Flash Drives category. This manual has pages.

Related Manuals

iStorage datAshur Personal Manual

iStorage datAshur Personal2 Manual

iStorage datAshur Manual

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

User Manual

personal

Remember to save your PIN in a safe place.

If lost or forgotten, there is no way to access the drive.

If you are having difficulty using your datAshur Personal® drive please contact our technical department at

email address - support@istorage-uk.com or by phone on +44 (0) 20 8991 6260.

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

Windows™ is a registered trademark of Microsoft Corporation.

All other trademarks and copyrights referred to are the property of their respective owners.

Distribution of modied versions of this document is prohibited without the explicit permission of the copyright holder.

Distribution of the work or derivative work in any standard (paper) book form for commercial purposes is prohibited

unless prior permission is obtained from the copyright holder.

DOCUMENTATION IS PROVIDED AS IS AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND

WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE

LEGALLY INVALID.

iStorage datAshur Personal® is developed and manufactured by

iStorage Ltd. and is based on DataLock® technology licensed from

ClevX, LLC

All trademarks and brand names are the

property of their respective owners

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

Table of Contents

Introduction.............................................................................................................................. 4

Package contents ..................................................................................................................... 4

Layout ...................................................................................................................................... 5

LED indicators and their actions............................................................................................... 5

Customer delivery .................................................................................................................... 5

How to change the User PIN .................................................................................................... 6

How to create a New User PIN - when all cryptographic parameters have been zeroed ............ 6

Unlocking the drive with the User PIN ...................................................................................... 8

Locking the drive...................................................................................................................... 8

Conﬁguring the Admin PIN ...................................................................................................... 8

How to unlock the drive with the Admin PIN ............................................................................ 10

Changing the Admin PIN.......................................................................................................... 11

Administrator Privilege Commands ......................................................................................... 12

i. Clear the User PIN: ..................................................................................................... 12

ii. Enable write protect - read only mode: ....................................................................... 12

iii. Disable write protect - read only mode: ...................................................................... 12

iv. Show security controller ﬁrmware version: ................................................................ 13

How to reset the drive .....................................................................................................14

Conﬁguring the drive with Windows OS after a complete reset .......................................14

Conﬁgure the drive with Mac OS ....................................................................................20

Brute Force Hacking Detection ........................................................................................22

Booting from the datAshur Personal ...............................................................................22

FAQ’s - Frequently Asked Questions ...............................................................................23

Technical support & Warranty .........................................................................................27

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

Thank you for purchasing the iStorage datAshur Personal® drive, an ultra secure and easy to use,

hardware encrypted USB PIN activated ash drive.

The datAshur Personal® drive uses military grade AES 256-bit CBC hardware encryption, which

encrypts all data stored on the drive in real-time. The datAshur Personal® drive requires no software

and is OS and host independent.

The datAshur Personal® drive incorporates a rechargeable battery allowing the user to enter a 7-15

digit PIN (Personal Identication Number) onto the on-board keypad before connecting the drive to a

USB port.

Should the drive be lost or stolen, the user can rest assured that all data held on the

datAshur Personal® drive is safe and cannot be accessed by any unauthorised person.

The datAshur Personal® drive can be congured with both a User and Admin PIN, making it perfect

for corporate and government deployment. As the datAshur Personal® drive is unlocked via the

onboard keypad and not a host computer, it is not vulnerable to software/hardware based key-loggers

or brute force attacks.

Package contents

• datAshur Personal® USB ash drive

• Quick Start Guide

Introduction

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

1. Layout

LOCK LED, stand by while the drive is locked

UNLOCK LED, drive is unlocked when ashing

Keypad

Key Button, used to activate the drive and to enter PIN codes

BLUE LED, when solid, the drive is connected to the computer, when

ashing data is being transferred.

3. Customer delivery

• datAshur Personal® is shipped with a default User PIN 1-1-2-2-3-3-4-4

• Rechargeable battery installed and charged

• Admin PIN is not set

When all LEDs are OFF the datAshur Personal

is locked and secure.

blink Drive is locked and secure

blink Drive is unlocked in User Mode solid No User PIN is congured

double

blink

Drive is unlocked in Admin Mode blink

together

Accepting User PIN verication when

setting / changing the PIN

solid Drive is connected to a powered

USB port

double

blink

Accepting Admin PIN verication when

setting / changing the PIN

solid Drive is connected to host computer

and is idle

illuminate

together

Accepting new PIN

blink Data exchange with host computer blink

alternately

Error

2. LED indicators and their actions

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

4. How to change the User PIN

PIN requirements:

• Must be between 7-15 digits in length

• Must not contain only repetitive numbers e.g. 3-3-3-3-3-3-3

• Must not contain only consecutive numbers e.g. (1-2-3-4-5-6-7),(7-8-9-0-1-2-3-4),(7-6-5-4-3-2-1)

• Drive must NOT be connected to a host

Note: If a mistake was made while dening a new PIN or the procedure was aborted,

the drive will retain the old PIN.

5. How to create a new User PIN

INSTRUCTIONS LED ACTIVITY

Press KEY Button

Enter User PIN to unlock drive

(Factory default PIN 1,1,2,2,3,3,4,4)

and press KEY Button

will blink together

will illuminate together for approximately

4 seconds and then:

will blink indicating correct PIN entry

Press and hold KEY Button for 3 seconds will illuminate together

While illuminated enter New User PIN

and press KEY Button

will blink in unison

Re-enter New User PIN

and press KEY Button

will illuminate and then

change to blinking

Insert datAshur Personal into USB port blinks if 1st and 2nd entries match

blink alternately if PIN entry incorrect

All cryptographic parameters (including User PIN and Admin PIN) are zeroed after hacking detection

has been triggered by 10 consecutive failed attempts to unlock, or when the drive has been manually

reset (see section No. 12)

This state is evident by a solid lit RED LED indicator. It will be necessary to set a New User PIN by

following these instructions.

Once the User PIN has been dened, a new encryption key is generated using the on-board random

number generator.

Conguring a New User PIN overleaf

when all cryptographic parameters have been zeroed

N.B.

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

Note:

It becomes necessary to format

the drive at this point as all

previous data is obscured with the

previous encryption key (including

the le allocation table).

INSTRUCTIONS LED ACTIVITY

Press and hold KEY Button for 3 seconds will illuminate together

While are illuminated enter a

New User PIN and press KEY Button

will blink in unison

Re-enter New User PIN

and press KEY Button

will illuminate together for approximately

4 seconds and then:

will blink indicating correct PIN entry

Insert datAshur Personal into USB port will illuminate in a constant state

blink alternately if PIN entry incorrect

5. How to create a new User PIN - continued

PIN requirements:

• Must be between 7-15 digits in length

• Must not contain only repetitive numbers e.g. 3-3-3-3-3-3-3

• Must not contain only consecutive numbers e.g. (1-2-3-4-5-6-7),(7-8-9-0-1-2-3-4),(7-6-5-4-3-2-1)

• Drive must NOT be connected to a host

A User PIN can only be created when the

RED LED is lit in a constant state (datAshur

Personal® reset) or changed when the

GREEN LED is blinking (datAshur Personal®

unlocked).

Neither User nor Admin PIN can be created

while the drive is connected to a host com-

puter.

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

6. Unlocking the drive with User PIN

All data stored on the drive is encrypted using AES 256-bit CBC encryption. In order to access, the

drive must rst be unlocked. A locked drive is not accessible by the host computer.

INSTRUCTIONS LED ACTIVITY

Press KEY Button

Enter User PIN to unlock drive

(Factory default PIN 1,1,2,2,3,3,4,4)

and press KEY Button

will blink together

will illuminate together for

approximately 4 seconds and then:

will blink indicating correct PIN entry

Note that at this point the

following occurs: will blink indicating the correct PIN entry

will blink indicating the incorrect PIN entry

Insert your datAshur Personal into USB port

will illuminate in a constant state

will illuminate and icker

Note: Once unlocked, the GREEN LED will blink for 30 seconds, within which time

the drive needs to be connected to a USB port.

If no connection has been detected within 30 seconds the drive will lock.

7. Locking the drive

The datAshur Personal® drive automatically locks when unplugged from the host computer or power

to the USB port is turned off.

8. Conﬁguring the Admin PIN

PIN requirements:

• Must be between 7-15 digits in length

• Must not contain only repetitive numbers e.g. 3-3-3-3-3-3-3

• Must not contain only consecutive numbers e.g. (1-2-3-4-5-6-7),(7-8-9-0-1-2-3-4),(7-6-5-4-3-2-1)

• Drive must NOT be connected to a host

If a User PIN exists, the datAshur Personal® drive must be unlocked with the User’s PIN rst.

If the drive is in a reset state (solid RED indicator), an Admin PIN can be set at any time.

For details please see the table overleaf.

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

The following table depicts the possible actions when the drive is in different states:

User PIN Admin PIN Possible Actions

NOT SET NOT SET

Can set either User or Admin PIN

Cannot access drive until User or Admin PIN is dened

SET NOT SET

Can change User PIN when unlocked as User

Can set Admin PIN when unlocked with User PIN

Can access data when unlocked as User

NOT SET SET

Can set User PIN when drive is locked

Can unlock drive with Admin PIN

Can change Admin PIN when unlocked as Administrator

Can perform Administrator commands

SET SET

Can unlock drive with either User or Admin PIN

Can change User PIN when unlocked as User

Can change Admin PIN when unlocked as Administrator

INSTRUCTIONS LED ACTIVITY

Double press the KEY Button

and hold on the 2nd press for 3 seconds will double blink once and then turn solid

Enter the New Admin PIN

and press KEY Button

will double blink if correct PIN entry or

will blink alternately if PIN entry incorrect

Re - Enter the New Admin PIN

and press KEY Button

will illuminate together for approximately

2 seconds and then:

will double blink indicating correct PIN entry

Note that at this point the

following occurs:

will double blink if 1st and 2nd entries match

will blink alternately if PIN entry incorrect

Insert your datAshur Personal into USB port will illuminate in a constant state

will illuminate and icker

Note: A double blink indicates the drive is unlocked in Admin mode.

A single blink indicates the drive is unlocked in User mode.

The drive has to be unlocked in user mode in order to proceed with conguring an Admin PIN.

It is set by following the instructions below:

#10

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

Figure 1 shows the GREEN blinking characteristics when the drive is opened in user mode (top)

and admin mode (bottom).

Figure 2 shows the difference between pressing KEY Button to set a User PIN vs. setting the

Admin PIN.

Figure 2: Key entry for mode selection

User

Administrator

3 seconds

1/4 sec

Figure 1: Mode indication

Single Blink

Double Blink

User

Administrator

On On

On On On On

Off Off Off

Off

Note: Once unlocked, the GREEN LED will blink for 30 seconds, within which time

the drive needs to be connected to a USB port.

If no connection has been detected within 30 seconds the drive will lock.

9. How to unlock with Admin PIN

INSTRUCTIONS LED ACTIVITY

Press the KEY Button twice

in succession

(similar to double-clicking a mouse)

will double blink together (Figure 1. above)

Enter Admin PIN

Press KEY Button will illuminate together as self-tests are run

will double blink if admin entered correct PIN

will blink if incorrect PIN was entered

#11

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

10. Changing the Admin PIN

INSTRUCTIONS LED ACTIVITY

Press the KEY Button twice

in succession

(similar to double-clicking a mouse)

will double blink together

Enter Admin PIN

Press Key Button

will illuminate together as self-tests are run

will double blink if admin entered correct PIN

will blink if incorrect PIN was entered

Double press the KEY Button

and hold on the 2nd press for 3 seconds will double blink once and then turn solid

Enter the New Admin PIN

and press KEY Button

will double blink if correct PIN entry or

will blink alternately if PIN entry incorrect

Re-enter the New Admin PIN

and press KEY Button

will illuminate together for approximately

2 seconds and then:

will double blink indicating correct PIN entry

Note that at this point the

following occurs:

will double blink if 1st and 2nd entries match

will blink alternately if PIN entry incorrect

Insert your datAshur Personal into USB port will illuminate in a constant state

will illuminate and icker

PIN requirements:

• Must be between 7-15 digits in length

• Must not contain only repetitive numbers e.g. 3-3-3-3-3-3-3

• Must not contain only consecutive numbers e.g. (1-2-3-4-5-6-7),(7-8-9-0-1-2-3-4),(7-6-5-4-3-2-1)

• Drive must NOT be connected to a host

Once an Admin PIN has been created, the datAshur Personal® must be unlocked with the Admin

PIN rst. If the drive is in a reset state (solid RED indicator), an Admin PIN can be set at any time.

Note: GREEN LED will double blink for 30 seconds, within which time the drive

needs to be connected to a USB port.

If no connection has been detected within 30 seconds, the drive will lock.

#12

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

Each of the commands above can only be performed with the drive unlocked in admin mode.

In the event of a forgotten PIN, the Administrator can reset the User PIN.

This is done by performing the following:

• Unlock the drive in admin mode

• Double press and hold KEY Button as if changing the Admin PIN

• Enter ‘U’ + ‘R’ followed by KEY Button (e.g. 8 - 7 - KEY)

• The GREEN and RED LEDS will blink 3 times to indicate success

• The GREEN LED will then double blink until plugged in

• After the drive re-locks, it will awake with a solid RED LED

• A new User PIN can be dened at this point

It is possible to write content to the drive as an administrator and restrict user access to read-only.

This is done by performing the following:

• Unlock the drive in admin mode

• Double press and hold the KEY Button as if changing the Admin PIN

• Enter ‘W’ + ‘P’ + ‘1’ followed by KEY Button (e.g. 9 - 7 - 1 - KEY)

• GREEN and RED LEDS will blink 3 times to indicate success

• GREEN LED will then double blink until plugged in

Once activated, user access is limited to read-only.

Restricted write protect access can be turned off with access restored to read / write.

This is done by performing the following:

• Unlock the drive in admin mode

• Double press and hold the KEY Button as if changing the Admin PIN

• Enter ‘W’ + ‘P’ + ‘0’ followed by KEY Button (e.g. 9 - 7 - 0 - KEY)

• GREEN and RED LEDS will blink 3 times to indicate success

• GREEN LED will then double blink until plugged in

iii. Disable write protect - read only mode:

11. Administrator Privilege Commands

i. Clear the User PIN:

ii. Enable write protect - read only mode:

FUNCTION BUTTON COMBINATION OUTCOME

i. Clear the User PIN U + R + KEY Button User PIN RESET

ii. Turn write protect ON W + P + 1 + KEY Button Write Protect ON

iii. Turn write protect OFF W + P + 0 + KEY Button Write Protect OFF

iv. Show rmware version R + V + KEY Button Revision

A number of special functions can be performed once the drive is unlocked in administrator mode.

#13

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

To display the rmware revision do the following:

• Unlock the drive in admin mode

• Double press and hold the KEY Button as if changing the Admin PIN

• Enter ‘R’ + ‘V’ followed by the KEY Button (e.g. 7 - 8 - KEY)

• The RED LED will blink according to the most-signicant digit of revision.

• The GREEN LED will blink according to the least-signicant digit.

For example, if the revision number is ‘13’, all indicators will turn off momentarily followed

by a 1 (one) blink from the RED LED followed by 3 (three) blinks from the GREEN LED.

The drive will then start double blinking to indicate that it is unlocked in admin mode.

11. Administrator Privilege Commands - continued

iv. Show security controller rmware version:

#14

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

12. How to RESET the drive

In the event both Admin and User PIN have been forgotten, or user wants to delete all stored data,

please follow the instructions below:

The reset process will clear all cryptographic parameters including both User and Admin PIN.

In addition, the write protect feature will be reset so the drive becomes writable again.

Dening a new PIN (either User or Admin) from the reset state will cause the datAshur Personal® to

invoke the random number generator to create a new encryption key.

Once a new PIN is dened, the drive will become busy running self-tests and generating a new

random encryption key.

This phase is evident by both the RED and GREEN LEDS intensifying in brightness.

The GREEN LED will blink when the drive is ready for use.

13. Conﬁguring the drive with Windows OS after a complete reset

In the event that hacking detection has been triggered by entering the incorrect PIN 10 times in

succession or the drive has been reset, all data on the drive will be lost forever.

Once a new User PIN has been created, the datAshur Personal® drive will need to be initialised and

formatted.

To initialise your datAshur Personal® drive, do the following:

1. Create a new User PIN (see section 5 above) in the iStorage datAshur Personal® Manual

2. Unlock the datAshur Personal® drive by entering the New User PIN and connect to a computer’s

USB port.

Action continued overleaf.

INSTRUCTION LED ACTIVITY

Press and hold KEY Button &

number button together for 3 seconds will illuminate together

Release buttons will blink in unison

Enter will blink in unison

Press KEY Button will turn off

Press KEY Button will remain in solid state

Indicates User PIN must be set prior to use

#15

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

13. Conﬁgure the drive with Windows OS - continued

3. The computer should notify the user with the following message:

4. Proceed by clicking on Format disk.

Select FAT32 or NTFS depending on your needs, enter a Volume Label and click Start.

#16

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

5. Click OK to continue with formatting the drive. This procedure will erase ALL data on the drive.

6. The procedure will nish formatting the drive and conrm that formatting has been completed.

While the datAshur Personal® drive is formatting the BLUE LED will be ashing.

13. Conﬁgure the drive with Windows OS - continued

Once nished, the BLUE LED becomes solid and your datAshur Personal® drive is ready for use.

#17

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

13. Conﬁgure the drive with Windows OS - continued

In case that the formatting wizard does not appear, please follow the procedure below:

1. Right click My Computer or Computer and then click Manage.

2. In the Computer Management window under the Disk Management tab, the datAshur Personal®

drive is recognised as a removable device in raw format.

Action continued overleaf.

#18

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

13. Conﬁgure the drive with Windows OS - continued

3. In the blank area under the unallocated section right click Removable Raw Drive and select

Format

4. The Format window will open.

Enter a new Volume Label.

Select FAT32 or NTFS depending on

your needs and click OK.

#19

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

13. Conﬁgure the drive with Windows OS - continued

5. Click OK on the Format warning window to continue with formatting the drive.

This procedure will erase ALL data on the drive.

6. The procedure will nish formatting and return to the Disk Management window.

While the datAshur Personal® drive is formatting the BLUE LED will start ashing.

When nished, the BLUE LED becomes solid and your datAshur Personal® drive is ready for use.

#20

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

14. Conﬁgure the drive with Mac OS

In the event that hacking detection has been triggered by entering the incorrect PIN 10 times in

succession or the drive has been reset, all data on the drive will be lost forever.

Once a New User PIN has been created, the datAshur Personal® drive will need to be initialised and

formatted.

To format your datAshur Personal® drive on Mac OS computers, do the following:

1. Create a New User PIN (see section No. 5)

2. Unlock the datAshur Personal® drive by entering the New User PIN and connect to a Mac

computer’s USB port.

3. The system will prompt you with INITIALIZE window.

4. Press INITIALIZE and select the datAshur Personal® drive in the Disk Utility window.

#21

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

To format your datAshur Personal® drive on Mac OS computers, do the following:

5. Click on the datAshur Personal® drive on the left side of the Disk Utility window.

6. Choose Erase from the contextual menu on the right side of the window

7. Select MS-DOS for the Volume Format

8. Click Erase

14. Conﬁgure the drive with Mac OS - continued

9. The formatted datAshur Personal® drive will appear in the Disk Utility window and

will mount onto the desktop.

#22

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

15. Brute Force Hacking Detection

After 10 consecutive failed attempts to unlock the drive, all cryptographic parameters are zeroed

including User and Admin PIN. In this state, a New User PIN must be dened which will cause a

new encryption key to be generated.

All previously stored data is no longer accessible and the drive will require formatting.

16. Booting from the datAshur Personal®

iStorage datAshur Personal® USB drives are equipped with a 10 second delay in order to

accommodate power cycling during a host boot process. No special actions are required on the part

of the user. In order to use this feature, simply unlock the drive and connect to the USB port of a

host computer. Turn on host power.

Under certain conditions, the drive may take 10 seconds to lock. For example, putting the host

computer into standby mode and leaving the drive connected. To force an immediate lock, always

unplug to remove USB power to the drive.

#23

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

NOTE We strongly recommend that you carefully read this User Manual, shipped with the device or

available for download on our website before contacting us for technical support.

There are no “Back Doors” to our products, we cannot retrieve a forgotten PIN or retrieve

any data off the drives unless the PIN is known.

Below are answers for the most frequently asked questions:

Q. HOW DO I USE THE datAshur Personal® DRIVE FOR THE FIRST TIME?

A. The datAshur Personal® drive comes with a default PIN CODE which will unlock the

device for the rst time, allowing the user to create their own unique User and Admin PIN.

Please follow this procedure:

Press KEY Button

Enter 1-1-2-2-3-3-4-4

Press KEY Button

The GREEN LED light will indicate the device is unlocked

Q. WHAT IS A USER PIN CODE?

A. The User PIN (Personal Identication Number) can be changed to almost any number

that is desired.

To create your New User PIN follow the instructions below:

The New User PIN must be 7 to 15 digits long.

The New User PIN cannot contain only repetitive numbers (3-3-3-3-3-3-3)

The New User PIN cannot contain only consecutive numbers (1-2-3-4-5-6-7) , (7-6-5-4-3-2-1)

You can create a word, name, phrase or any other alphanumerical PIN combination by simply

pressing the key with the corresponding letters on it.

Examples of these types of PIN CODES are:

For Password1 you would press the following keys:

7(pqrs) 2(abc) 7(pqrs) 7(pqrs) 9(wxyz) 6(mno) 7(pqrs) 3(def) 1

For iStorage you would press:

4(ghi) 7(pqrs) 8(tuv) 6(mno) 7(pqrs) 2(abc) 4(ghi) 3(def)

Using this method, long and easy to remember PIN CODES can be created.

17. FAQ - Frequently Asked Questions

#24

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

Q. HOW DO I UNLOCK THE datAshur Personal® DRIVE IF THE BATTERY IS DEAD?

A. Your datAshur Personal® drive has a built-in rechargeable battery.

Even if the battery is fully discharged you can still continue to use the drive by following the

instructions below:

Connect the datAshur Personal® drive to a USB port on any computer

While connected to the computer, enter the User or Admin PIN to unlock the drive

While connected to the USB port, the internal battery will automatically charge - this is

shown by a ashing BLUE LED.

We recommend you keep the datAshur Personal® drive connected for approximately 1 hour to

fully charge the battery.

Q. HOW DO I CHANGE THE DEFAULT PIN CODE?

A. Please follow this procedure:

Press the Key Button

Within 10 seconds enter the Current User PIN and press the Key Button again

Press and hold the Key Button for 3 seconds

Enter a New User PIN number (The PIN must be 7 - 15 digits long)

Press the Key Button to store the New User PIN

Re-enter the New User PIN number

Press the Key Button to conrm the New User PIN .

Q. WHAT IF I FORGET MY PIN CODE ON MY datAshur Personal® DRIVE?

A. If you forget the User and Admin PIN, there is absolutely no way of gaining access to the data stored

on the drive, there are no back doors into the drive.

You will need to completely reset the datAshur Personal® drive by following the directions in this User

Manual. By resetting the drive, all data stored on the datAshur Personal® will be deleted.

When the datAshur Personal® drive is reset the following occurs:

• A new encryption key is generated

• The User and Admin PIN are deleted

• All the data on the datAshur Personal® drive is deleted

• A new User PIN will need to be set

• The datAshur Personal® drive will need to be formatted

17. FAQ - Frequently Asked Questions - continued

#25

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

Q. HOW DO I CREATE AN ADMIN PIN?

A. The Admin PIN is useful in a corporate environment where an Administrator can provide access to the

datAshur Personal® drive if the User PIN is forgotten or unavailable.

Please follow this procedure:

Press the Key Button

Enter the User PIN within 10 seconds and press the Key Button

Rapidly press the Key Button twice and hold the Key Button on the second press for 4 seconds

Enter a new Admin PIN and press the Key Button

NOTE If the LEDS in the above step are “single blinking” then the rst key press did not register

or was not fast enough.

If you continue, you will be changing the User PIN

Re-enter the New Admin PIN and press the Key Button

Q. WHAT IS BRUTE FORCE OR HACKING ATTEMPT PROTECTION?

A. 10 consecutive incorrect PIN entries will activate the brute force mechanism and will completely reset

the drive as follows:

• A new encryption key is generated

• The User and Admin PIN are deleted

• All the data on the datAshur Personal® drive is deleted

• A new User PIN will need to be set

• The datAshur Personal® drive will need to be formatted

Q. HOW DO I RESET THE datAshur Personal® DRIVE?

A. In case the User PIN is forgotten, or if you would like to delete all data stored on the drive and

congure a New User PIN, the RESET process will clear the User and Admin PIN, the encryption

key and will destroy all data. This means a New User PIN will have to be dened in order to re-enable

the datAshur Personal® drive.

Also, since this forces the creation of a new encryption key, the datAshur Personal® drive will

have to be reformatted.

Please follow this procedure:

Press and hold the Key Button and the number 2 Button for 3 seconds

Press 9 - 9 - 9 and press the Key Button

Press the Key Button again

NOTE When the solid RED LED is on, a New User PIN will need to be set.

17. FAQ - Frequently Asked Questions - continued

#26

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

Q. HOW DO I CREATE A NEW USER PIN AFTER RESETTING THE datAshur Personal® DRIVE?

A. Once the datAshur Personal® drive has been reset either with the method from the previous step

or from a brute force attack (10 unsuccessful attempts to unlock) a New User PIN will need to be

dened.

Please follow this procedure:

Press and hold the Key Button for 3 seconds

Within 10 seconds enter the New User PIN

Press the Key Button to save

Re-enter the New User PIN number & press the Key Button

If the New User PIN was accepted, the GREEN LED will be ashing.

The datAshur Personal® drive will be unlocked and be ready to format.

Q. HOW SHOULD I FORMAT MY DRIVE?

A. The datAshur Personal® drives come formatted to FAT32 ling system by default. This will allow

you to use the datAshur Personal® drive across all platforms (Windows, Apple, Linux) with a le size

limitation of up to 4GB.

Q. WHAT IS THE DIFFERENCE BETWEEN THE USER MODE AND ADMIN MODE?

A. For an ordinary user we recommend to have just one PIN code, whereas in a corporate

environment we strongly suggest creating an Admin PIN and User PIN.

When in admin mode you will be able to change the User PIN code.

Q. HOW DO I ACCESS ADMIN MODE?

A. Please follow this procedure:

Press the Key Button 2 times

Within 10 seconds enter the Admin PIN

Connect the datAshur Personal® drive to a USB port within 30 seconds

17. FAQ - Frequently Asked Questions - continued

#27

www.istorage-uk.com

iStorage datAshur Personal ® Manual – v 21

personal

iStorage provides the following helpful resources for you:

iStorage’s Website

http://www.istorage-uk.com

E-mail correspondence

support@istorage-uk.com

Telephone support with our Technical Support Department on +44 (0) 20 8991-6260.

iStorage’s Technical Support Specialists are available from 9:00 a.m. to 5:30 p.m.

GMT - Monday through Friday.

Warranty and RMA information

Three Year Warranty

iStorage offers a 3-year warranty on the iStorage datAshur Personal® against defects in materials

and workmanship under normal use. The warranty period is effective from the date of purchase either

directly from iStorage or an authorised reseller.

Disclaimer and terms of the warranty:

THE WARRANTY BECOMES EFFECTIVE ON THE DATE OF PURCHASE AND MUST BE VERIFIED WITH YOUR SALES RECEIPT OR

INVOICE DISPLAYING THE DATE OF PRODUCT PURCHASE.

ISTORAGE WILL, AT NO ADDITIONAL CHARGE, REPAIR OR REPLACE DEFECTIVE PARTS WITH NEW PARTS OR SERVICEABLE

USED PARTS THAT ARE EQUIVALENT TO NEW IN PERFORMANCE. ALL EXCHANGED PARTS AND PRODUCTS REPLACED UNDER

THIS WARRANTY WILL BECOME THE PROPERTY OF ISTORAGE.

THIS WARRANTY DOES NOT EXTEND TO ANY PRODUCT NOT PURCHASED DIRECTLY FROM ISTORAGE OR AN AUTHORIzED RE-

SELLER OR TO ANY PRODUCT THAT HAS BEEN DAMAGED OR RENDERED DEFECTIVE: 1. AS A RESULT OF ACCIDENT, MISUSE,

NEGLECT, ABUSE OR FAILURE AND/OR INABILITY TO FOLLOW THE WRITTEN INSTRUCTIONS PROVIDED IN THIS INSTRUCTION

GUIDE: 2. BY THE USE OF PARTS NOT MANUFACTURED OR SOLD BY ISTORAGE; 3. BY MODIFICATION OF THE PRODUCT; OR

4. AS A RESULT OF SERVICE, ALTERNATION OR REPAIR BY ANYONE OTHER THAN ISTORAGE AND SHALL BE VOID.

THIS WARRANTY DOES NOT COVER NORMAL WEAR AND TEAR.

NO OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OR MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE, HAS BEEN OR WILL BE MADE BY OR ON BEHALF OF ISTORAGE OR BY OPERATION OF LAW WITH

RESPECT TO THE PRODUCT OR ITS INSTALLATION, USE, OPERATION, REPLACEMENT OR REPAIR.

ISTORAGE SHALL NOT BE LIABLE BY VIRTUE OF THIS WARRANTY, OR OTHERWISE, FOR ANY INCIDENTAL, SPECIAL OR CONSE-

QUENTIAL DAMAGE INCLUDING ANY LOSS OF DATA RESULTING FROM THE USE OR OPERATION OF THE PRODUCT, WHETHER

OR NOT ISTORAGE WAS APPRISED OF THE POSSIBILITY OF SUCH DAMAGES.

18. Techical Support

#28

iStorage datAshur Personal ® Manual – v 21

www.istorage-uk.com

personal

iStorage Limited, iStorage House,

13 Alperton Lane, Perivale, Middlesex, UB6 8DH

Tel: +44 (0) 20 8991 6260 | Fax: +44 (0) 20 8991 6277

e-mail: info@istorage-uk.com | web: www.istorage-uk.com