JPL JPL-100-PM User Manual
Displayed below is the user manual for JPL-100-PM by JPL which is a product in the Headphones & Headsets category. This manual has pages.
Related Manuals
www.jpltele.com
GUARANTEE
Your JPL Telecom product has been carefully manufactured and 100% tested using high quality
assured components. It is guaranteed against faulty workmanship and materials for a period of 12
months from the date of purchase. In the unlikely event that a failure should occur, please contact
the JPL Telecom dealer from which you purchased this product or visit www.jpltele.com and follow
our product returns procedure. You will be given a RMA number and instructions on how to return
your headset.
Further help can be found on-line at www.jpltele.com on our FAQs page.
Note: Removing the factory-applied warranty label on the in-line wire will void the warranty.
Specically exempt from warranty are limited-life consumable components subject to normal wear
and tear, such as microphone windscreens, ear cushions and other accessories. Your statutory rights
under common law are in no way aected by this guarantee. The warranty does not cover cosmetic
damage or damage due to misuse, abuse, negligence, acts of nature, accident, disassembling or
modication of, or to any part of, the product. The warranty does not cover damage due to improper
operation, maintenance or installation, or attempted repair by anyone other than JPL Telecom. Any
unauthorised repairs will void this warranty.
LIMITED WARRANTY
Consequential and incidental damages, including without limitation, loss of property and those
arising from breach of any express or implied warranty, are not the responsibility of JPL Telecom and
to the extent permitted by law, are excluded.
In accordance with its policy of progressive product design, JPL Telecom reserves the right to
change product specications without prior notice.
* Repair or replacement is at the discretion of the manufacturer.
REGISTERED ADDRESS
USA Oice: JPL Telecom Holdings LLC
Box 12, Suite 310, 8910 Astronaut Blvd., Cape Canaveral, FL 32920, USA
Mexico Oice: JPL Telecom Mexico
Buon 46-604, Col. Nueva Anzures, Delg. Miguel Hidalgo C.P. 11590
UK Oice: JPL Telecom Limited
Unit 1, Church Close Business Park, Church Close, Todber, Sturminster Newton,
Dorset, DT10 1JH England
Registered in England No. 5250754
(NB. For product returns, please follow instructions and returns department address provided on our website.
Returned products received at the registered addresses are likely to be returned to sender).
14/06/061-12m-v1
2014/30/EU
USER GUIDE
Introduction
Thank you for purchasing this product.
Your new headset has been developed using the latest technology,
designed for comfort and freedom of movement.
This headset is very easy to use and setup, although to get the best from
your new purchase, we recommend you read this user guide carefully
before using the headset for the rst time.
Unpacking
Remove your headset from its packaging and ensure that along with this
user guide, you have the correct specied accessories.
Retain the headset box for storage of your unit, and also in the unlikely
event that it needs to be returned for servicing or repair.
Warning
Ensure that all electrical connections (including extension leads and
interconnections between pieces of equipment) are properly made and in
accordance with the relevant manufacturers instructions.
Do not continue to operate the equipment if you are in any doubt about
it working normally, or if it is damaged in any way. Disconnect from your
telephone equipment and consult your dealer.
Do not allow electrical equipment to be exposed to rain or moisture.
Never push anything into holes, slots or any other opening on your
headset as this could result in fatal electrical shock.
Do not open the headset housing as doing so will void the warranty.
Never guess or take chances with electrical equipment.
Telephone headsets are capable of producing high levels of sound.
Prolonged exposure to high sound levels can cause damage to hearing.
A
Safety
For your own safety, this product should only be used with CE ACA and
RoHS approved equipment. Using this headset with non approved
equipment can void this products warranty.
Maintenance
To gain optimal performance, hygiene and life-span from you headset,
replace all consumable items; - ear foam cushion, microphone foam (if
applicable) and microphone lter every 6 months.
Environmental notice
This headset has been made to CE, RoHS and WEEE standards. In the
interest of recycling raw materials, please do not dispose of this headset
in the household waste at the end of its useful life. Disposal can take place
at approved recycling or disposing locations in accordance with local
regulations.
Optional
Accessory
Connecting Your Headset
Does your desk phone have a dedicated headset connection
port?
If it does, simply connect your headsets Quick Disconnect cable to your
chosen bottom lead (not supplied), then connect the bottom lead to the
dedicated port on your desk phone.
If you nd that when the headset is connected to the phone it is not
working as expected then it is very likely you are using an incompatible
bottom lead.
There are various bottom leads available, these are all designed to connect
your headset to specic brands of desk phone, ensuring whatever your
setup, your headset will be compatible.
Please contact your dealer to attain the correct bottom lead for your desk
phone, or see the compatibility table on our website:
http://www.jpltele.com/jpl-compatibility.aspx
Note: All bottom leads are supplied as an accessory at additional cost.
Clothing Clip
Quick Disconnect
Microphone
Ear Cushion
Adjustable Headband
C
Using the Quick Disconnect Lead
Your headset may be equipped with a Quick Disconnect allowing you to
move away from your desk (disconnecting the 2 connectors) without losing
the call.
What to do if your desk phone does not support a dedicated
headset connection port:
Your desk phone requires an external headset amplier. If you already
have a headset amplier, read through the units setup guide and connect
your headset accordingly.
In the event that you do not have a headset amplier, please contact the
supplier of this headset. They will be able to provide the correct amplier
for your headset and desk phone.
Bottom Lead
Headset Amplier
Adjusting the Headband
Adjusting the Headband
Place the headset receiver to your ear(s), if using a single ear headset you
should set the T-bar above your other ear.
Adjust the headband until it is comfortable, ideally ensuring there is
virtually no pressure felt on the ear(s)
Most headsets can be worn on either side. To change the microphone side,
simply rotate the microphone boom 300 degrees to the other side.
Adjusting the Microphone Boom
To avoid low or distorted sound, and to provide clear and crisp telephone
calls, the microphone should be positioned within 30mm of your mouth.
The microphone boom arm will move in a variety of directions to ensure
the best t.
Adjusting the Clothing clip
Your new headset is supplied with a clothing clip to allow comfortable tting
of your headset without the cable getting caught or inadvertently pulled.
The clothing clip should be fastened at a comfortable level, ensuring
there is suicient slack on the cable allowing free movement of your head
without disturbing the headset position.
A
In the interests of hygiene it is advisable to replace
the ear cushions of your headset every 6 months
300°
30mm