JPL JPL-Element-X500 User Manual
Displayed below is the user manual for JPL-Element-X500 by JPL which is a product in the Headphones & Headsets category. This manual has pages.
Related Manuals
JPL-Element-X500
User Guide
Features:
• User changeable headband from single ear to dual ear
• Universal patented base with slot-in cartridge drawer to accept
Bluetooth or USB modules (Optional accessories - sold separately)
• DECT wireless technology level A
• Surround Shield™ noise cancelling microphone
• Sound Shield™ hearing protection
• Max100m(300)coverage
• Max 30 users in 50 square meters
• 6 hours talk time (stand by ~ 140 hours)
• Quick recharge time (60 to 90 mins)
• Volume contol on headset
• Boom arm adjustable through 270°
• In use / busy light indicator on speaker housing
• 50mm smooth protein leather ear cushion
• Headset weight 65g/80g
• Compatible with MS-Lync
• Patented design
• Full range of EHS cords available
• 24 Month repair or replacement warranty
Thisheadsetwillautoconguretoyourdeskphone.
The compatibility switch should be used in the alternative position, if no dial tone is heard in the headset
whenactive.Itwilltakeupto3minutesforthephoneandheadsettoestablishtheoptimumcallquality
withourAutoSetupfeature,ensuringthebestsound.Simplymakeatestexternalcallandtheheadset
willconguretotherequiredsettingsforyourphone.
IMPORTANT AUTO SET UP NOTICE
Helpful Setup Videos Found Here - https://www.jpltele.com/jpl-tutorials.aspx
What’s included
Base Unit
Monaural
Headband
Microphone
Boom Arm
Monaural
Headband
Switch Mode Power
Supply with Multi
Country Adapters &
Telephone Cord
Optional Accessories
Binaural
Headband
Bluetooth
Module
USB 2.0 Module and
USB Cable Type-A to Mini-B
JPL-DECT Lier Electronic Hook
Switch (EHS)
Type of lead varies
depending on phone model.
Please refer to EHS Guide
www.jpltele.com/ehs-cables
USB Cable Type-A to
Micro USB for optional
headset charging method
Microphone
Boom Arm
Attaching the headband
To attach the microphone boom
arm to the headband, align the
triangle shape on the microphone
boom arm with the triangle shape
on the headband and push to
clickintoplace.Themicrophone
boom arm will then rotate to your
requiredposition.
Detaching the headband
To detach the microphone boom arm from the
headband, gently push the microphone speaker from
insidetheearcushion.Thiswillpopthemicrophone
boomawayfromtheheadband.
DO NOT pull on the microphone boom
to remove it from the headband.
Align
Positioning the Microphone
30mm
Themicrophoneboomarmisexible,soyoucan
gently bend the boom and position it to suit the
curveofyourface.
The ideal position for the microphone is at the corner
ofthemouthapproximately30mm(2ngerwidth)
awayfromthemouth.
Microphone Boom Volume Control
Down Up
Mute
Mute /
Speaker Volume
HookOn/O
Answer / End
a call
In-use / busy
indicator
To change the speaker volume: roll the volume
switch towards the ‘plus’ sign to increase the
volume and roll the switch towards the ‘minus’
sign to reduce the volume and press the switch to
activatethemicrophonemutemode.
Connecting the Base Unit to your Desk Phone
DC Jack AUX Port
Handset Port
Telephone Port
• Plug the supplied telephone cord into the TEL port of the base unit
• Connect the other end of the telephone cord to the HEADSET port of the desk phone
Desk Phone with Headset Port
• On the desk phone, unplug the handset cable from the phone
• Plug the handset cable into the HANDSET port on the base unit
• Plug the telephone cord into the TEL port on the base unit and plug the other end of the
telephone cord into the HANDSET port on the desk phone
Compatibility Switch
• Select ‘1’ or ‘2’ until a dial tone is heard via the telephone connection
Desk Phone without Headset Port
Base Unit
Compatibility
Switch
This headset will auto congure to your desk phone.
The compatibility switch should be used in the alternative position, if no dial tone is heard in the headset
whenactive.Itwilltakeupto3minutesforthephoneandheadsettoestablishtheoptimumcallquality
withourAutoSetupfeature,ensuringthebestsound.Simplymakeatestexternalcallandtheheadset
willconguretotherequiredsettingsforyourphone.
IMPORTANT AUTO SET UP NOTICE
Helpful Setup Videos Found Here - https://www.jpltele.com/jpl-tutorials.aspx
Operating Instructions
Pairing a headset to the base unit:
1) Taketheheadsetothebaseunit
2) Make sure there is no power to the base unit
3) Place the headset on the base unit
4) Pluginthepowercordtothebaseunitandthe‘GREEN’TELlightwillash.
Now the base station is in pairing mode
5) Press the ‘mute button’ on the headset for 2-3 seconds until the ‘BLUE’
indicatorlightontheheadsetstartstoash(indicatingpairingmode)
6) Duringpairing,thebasestation’s‘GREEN’lightwillashandthe‘BLUE’lightontheheadsetwillash
7) Whenpairinghassuccessfullycompleted,thereisaconrmationbeeptoneontheheadset’s
earpiecespeaker.Thenbothlightswillstopashing.
Pairing a second headset to a base station:
1) Oneheadsetshouldalreadybepairedtothisbaseunit,ifsoitneedstobeturnedo
2) Toturntheheadseto,rstlytakeitothebaseunitandpressthecallaccept/rejectbuttonto
deactivate the green phone light on the base unit
3) Hold the call accept/reject button for 3 seconds, you should hear a short beep and then a longer
beepsignifyingtherstheadsetiso
4) Follow the steps in ‘Pairing a headset to a base unit’ above to connect the second headset
5) Oncethesecondheadsetisconnectedturntherstheadsetbackonwithashortpresstothecall
accept/reject button
6) Testtheheadsetsbycallingthephonesystemconnectedtothebaseunitandeachheadsetshouldring.
Please note: Pairing two headsets to one base unit allows each headset to answer the incoming call,
(amaximumofveheadsetscanbepairedtoonebaseunit)however,onlytheperson(therstto
answerthecall)willbeabletohearandinteractwiththecaller.
Mute
Please note: Your JPL-Element-X500 is supplied paired to the base unit straight out of the box.
However,ifaerchargingtheheadset,the‘GREEN’TELlightdoesn’tactivatewhentheheadsetis
removedfromthebaseunit,thenyoushouldfollowtheseinstructions.
Base Unit
Bluetooth
Pairing Button
PC/TEL
Selection
Microphone
Mute Button
Microphone
Volume
Compatibility
Switch
Mini ‘B’ USB/Bluetooth
Module Drawer
Bluetooth Button This function works when the Bluetooth module is inserted
PC/TEL Selection This function works when the USB cartridge is inserted
Microphone Mute Button Press to mute the call
Microphone Volume Yourheadsethasautomaticaudioconguration,(thiscantakeafew
minutes to settle) however, if required, you can adjust the volume
level for the speakers and microphone to suit
Compatibility Switch Select ‘1’ or ‘2’ until a dial tone is heard via the telephone connection
DC Jack Connect Power Adapter to DC Jack
AUX port ConnectionforHandsetLierorEHSAdapter(optionalextra)
Telephone Port Connect telephone cord to the headset port or handset port of a
telephone / base unit
Handset Port Plug Handset cord from the phone to Handset port
DC Jack AUX Port
Handset Port
Telephone Port
Microphone Mute Indicator
(Red Light)
PC/Bluetooth Indicator
(White Light)
Battery Charge Indicator
(Blue Light)
Telephone Indicator
(Green Light)
Bluetooth
Button
PC/TEL Selection
Microphone
Mute Button
Visual Indicator
Charging Status LED Status
Charging Battery Indicator: ‘Flashing’ 1 sec-ON, 1 sec-OFF
Fully Charged Battery Indicator: ‘ON’
LowBattery BatteryIndicator:‘Flashing’0.5sec-ON,0.5sec-OFF
Event LED Status
Press Microphone Mute Mute Indicator: ‘ON’
Press PC/TEL Selection PC/TEL Indicator - TEL: ‘OFF’ PC: ‘ON’
HookO SelectedModeIndicator:‘ON’
Audio Indicator
Event Sound Eect
Speaker / Microphone Volume Beep Sound ‘UP’ - High Tone, ‘DOWN’ - Low Tone
Max/Min Speaker Volume Double beep
Max/Min Microphone Volume Double Beep
Microphone Mute/Unmute Beep / Double Beep
Mute Reminder Beep (every 3 seconds)
HookO/On DoubleBeep(HighTone/LowTone)
Low Battery Continuous beep in headset when battery is low
Base Unit
Trouble Shooting
1. Cannot hear a dial tone.
• CheckthePC/TELbutton.TELMute:PC/TELindicator–‘OFF’
• Pleasecheckthecableconnectionbetweenbaseunitandphone.
• Check that the power adapter is plugged in and has power
• Pleasecheckthecompatibilityswitch.Adjustcompatibilityswitchuntilyoucanhearthedialtone.
2. Microphone volume (TX) is low / dead.
• Makesurethatthemicrophone(TX)mutefunctionisdeactivated.
• Check the position of the boom arm and make sure that the microphone is placed as close as
possibletoyourmouth(approx.2ngersdistance).
• Adjustthemicrophone(TX)volumeonthebottomofbaseunit.
3. Buzzing sound on the headset
• Telephone may not be fully immune to the radio transmission between your headset and base
unit.Toovercomethisproblem,movethebaseunittoatleast30cm/12”awayfromthephone.
4. Headset echoes
• Adjustthetelephone’svolume.Ifnecessary,adjustyourmicrophonevolumeontheheadsettoa
lowersetting.
5. EHS doesn’t work with the telephone
• Makesurethetelephoneiscompatiblewiththewirelessheadset.RefertotheEHSguide.
6. Headset was working, but it has stopped.
• Headsetmayneedpairingtothebaseunitagain.Refertothe‘OperatingInstructions’
• Headsetbatterymaybedead.Returntheheadsettothecradleonthebaseunitforcharging.
For more information, please contact: Support@jpltele.com and share the following information:
- Your name
- Your phone number
- Your email address
- Phone number
- Region
- Fault with product
- Barcode serial number (found on the bottom of the base unit)
- Number of units
Wewillendeavourtorespondtoyouwithinthenextfullworkingday.
Helpful Setup Videos Found Here - https://www.jpltele.com/jpl-tutorials.aspx
X500 Cartridge Module for
USB Connection
• SophoneinteroperabilitythroughUSB/computerwith3CX,AvayaOne-X,
CiscoJabber,CounterPathandSkypewithassistancefromtheJPLGateway.
• JPLGatewaysowaremustbeinstalledandrunningforremotecallcontrol
functionstoworkwithsupportedsophones.www.jpltele.com/gateway
• Before inserting your USB cartridge, make sure that the base unit
ispowered-o.
Additional Accessories
PC/Bluetooth
Indicator
PC/TEL
Selection
• Aerinsertingthecartridge,connectthepowerandthenconnecttheUSBcable.
• TomakeaUSBcall,pressthe“PC/TEL’button.
• Whenyoupressthe“PC/TEL”button,the“PC/TEL”LEDwillashonando.
USB Cable Type-A to Mini-B
Bluetooth
Pairing Button
PC/TEL
Selection
Microphone
Mute Button
Microphone
Volume
X500 Cartridge Module for
Bluetooth Connection
• Bluetooth allows the DECT headset to connect wirelessly to
Bluetoothenabledsmartphones.
• This headset allows wireless conversations from any desk phone,
sophoneandmobile.
• Before inserting your Bluetooth cartridge, make sure that the base
unitispowered-o.
JPL-DECT Lier
• TheJPL-DECTLierremotelylisthedeskphonehandset
tomakeoransweracall.
www.jpltele.com/accessories
(RefertotheJPL-DECTLierinstallationguide).
Electronic Hook Switch (EHS) Adapter
• EHS Adapter enables an incoming call to be answered
orendedbyusingtheOn/ObuttonontheHeadset.
www.jpltele.com/ehs-cables Refer to the EHS Compatibility Table to see which adapter you need for your
deskphone.(RefertotheEHSAdapterinstallationguidetoseehowtoinstallyourEHScable).
USB Cable Type-A to Micro USB
• Optionalmethodforchargingtheheadset.
Connect the micro USB jack to the micro USB port
located on the side of the headset
Type of lead varies
depending on phone
Additional Accessories
GUARANTEE
Register for 24 Month Warranty on-line at http://www.jpltele.com/product-registration.
Your JPL product has been carefully manufactured and 100% tested using high quality assured
components.It isguaranteedagainstfaultyworkmanshipandmaterials fora periodof24months
fromthedateofpurchase.Intheunlikelyevent thata failureshouldoccur,pleasecontacttheJPL
dealer from which you purchased this product or visit www.jpltele.com and follow our product
returnsprocedure.YouwillbegivenaRMAnumberandinstructionsonhowtoreturnyourheadset.
Further help can be found on-line at www.jpltele.com on our FAQs page.
Note: Removing the factory-applied warranty label on the back of the control unit will void the
warranty. Specically exempt from warranty are limited-life consumable components subject to
normalwearand tear,suchas microphonewindscreens,ear cushionsandother accessories.Your
statutory rights under common law are in no way aected by this guarantee. The warranty does
not cover cosmetic damage or damage due to misuse, abuse, negligence, acts of nature, accident,
disassemblingormodicationof,ortoanypartof,theproduct.Thewarrantydoesnotcoverdamage
due to improper operation, maintenance or installation, or attempted repair by anyone other than
JPLTelecom.Anyunauthorisedrepairswillvoidthiswarranty.
LIMITED WARRANTY
Consequential and incidental damages, including without limitation, loss of property and those
arising from breach of any express or implied warranty, are not the responsibility of JPL Telecom and
totheextentpermittedbylaw,areexcluded.
In accordance with its policy of progressive product design, JPL Telecom reserves the right to
changeproductspecicationswithoutpriornotice.
*Repairorreplacementisatthediscretionofthemanufacturer.
REGISTERED ADDRESS
UK Oice: JPL Telecom Limited
Unit 1, Church Close Business Park, Church Close, Todber, Sturminster Newton,
Dorset, DT10 1JH England
USA Oice: JPL Telecom LLC
445 W Merritt Ave, Merritt Island, FL 32953, USA
RegisteredinEnglandNo.5250754
(NB. For product returns, please follow instructions and returns department address provided on our website.
Returned products received at the registered addresses are likely to be returned to sender).
www.jpltele.com
18/268-v9