Table of Contents
LG 22MN430M-B User Manual
Displayed below is the user manual for 22MN430M-B by LG which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ENGLISH
2
CONTENTS
LICENSE ---------------------------- 3
ASSEMBLING AND PREPARING - 4
- Supported Drivers and Software -------------- 4
- Component and Button Description ---------- 5
How to Use the Joystick Button
- Moving and Lifting the Monitor --------------- 6
Mounting on a table
Mounting on a wall
USING THE MONITOR SET ------ 10
- Connecting to a PC ---------------------------10
D-SUB connection
HDMI connection
- Connecting to AV Devices -------------------- 11
HDMI connection
- Connecting Peripherals ----------------------- 11
Connecting Headphones
CUSTOMIZING SETTINGS ------ 12
TROUBLESHOOTING ------------ 17
SPECIFICATIONS ---------------- 18
- Preset Modes (Resolution) -------------------20
- Beep Guide ------------------------------------22
3
ENG
ENGLISH
LICENSE
Each model has different licenses. Visit
www.lg.com
for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The following content is only applied to the monitor which is sold in Europe market and which needs to
meet the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
CAUTION
NOTE
Supported Drivers and Software
You can download and install the latest version from the LGE website (
www.lg.com
).
Drivers and Software Installation Priority
Monitor Driver Recommended
OnScreen Control Recommended
yAlways use genuine components to ensure safety and product performance.
yThe product warranty will not cover damage or injury caused by the use of counterfeit components.
yIt is recommend that use the supplied components.
yIf you use generic cables not certified by LG, the screen may not display or there may be image noises.
yIllustrations in this document represent typical procedures, so they may look different from the actual product.
yDo not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.)
yApplying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way
will not be covered by the product warranty.
yDo not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
and could result in personal injury.
yWhen lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
yFor wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material in
raw material.With no peeled-off appearance, it has good durability. Please use it with confidence because there
is no problem in using the product at all.
yNote that the components may look different from those shown here.
yWithout prior notice, all information and specifications in this manual are subject to change to improve the
performance of the product.
yTo purchase optional accessories, visit an electronics store or online shopping site or contact the retail store
where you purchased the product.
yThe power cord provided may differ depending upon the region.
5
ENG
ENGLISH
Component and Button Description
Joystick Button
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your
finger.
Basic Functions
Power on Press the joystick button once with your finger to turn on the
monitor.
Power off Press and hold the joystick button once with your finger to turn off the
monitor.
◄/►Volume
Control
You can control the volume by moving the joystick button left/right.
(for HDMI only)
yThe joystick button is located at the bottom of the monitor.
NOTE
6
ENG
ENGLISH
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these in-
structions to prevent the monitor from being scratched
or damaged and to ensure safe transportation regard-
less of its shape or size.
yAs far as possible, avoid touching the monitor
screen. This may result in damage to the screen or
some of the pixels used to create images.
yIt is advisable to place the monitor in the original
box or packing material before attempting to
move it.
yBefore moving or lifting the monitor, disconnect
the power cord and all cables.
yHold the top and bottom of the monitor frame
firmly. Do not hold the panel itself.
yWhen holding the monitor, the screen should face
away from you to prevent it being scratched.
yWhen moving the monitor, avoid any strong shock
or vibrations to the product.
yWhen moving the monitor, keep it upright, never
turn the monitor on its side or tilt it sideways.
CAUTION
yIf you use the monitor panel without the stand
base, its joystick button may cause the monitor to
become unstable and fall, resulting in damage to
the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
7
ENG
ENGLISH
Mounting on a table
yLift and tilt the Monitor set into its upright posi-
tion on a table.
Leave a 100 mm (3.94 inches) space from the wall
for proper ventilation.
100 mm
(3.94 inches) 100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
CAUTION
yUnplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.
yMake sure to use the power cord that is provided
in the product package and connect it to a
grounded power outlet.
yIf you need another power cord, please contact
your local dealer or the nearest retail store.
8
ENG
ENGLISH
20
When you adjust the angle, do not hold the bottom
of the Monitor set frame as shown on the following
illustration, as may injure your fingers.
Do not touch or press the screen when adjusting the
angle of the monitor.
Do not hold this set like below picture.Monitor
screen can detach from stand base and injure your
body.
WARNING
Using the Kensington security system
The Kensington security system connector is located at
the back of the Monitor set. For more information of
installation and using, refer to the manual supplied with
the Kensington security system or visit
http://www.
kensington.com
.
Connect the Kensington security system cable between
the Monitor set and a table.
yThe Kensington security system is optional. You can
obtain it from most electronics stores.
NOTE
The angle of the screen can be adjusted forward or
backward from -5° to 20° for a comfortable viewing
experience.
NOTE
Front Rear
9
ENG
ENGLISH
Mounting on a wall
For proper ventilation, allow a clearance of 100 mm
(3.94 inches) on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
If you intend to mount the Monitor set to a wall, attach
Wall mounting interface (optional parts) to the back of
the set.
When you install the Monitor set using a wall mounting
interface (optional parts), attach it carefully so it will not
drop.
1 If you use screw longer than standard, the monitor
might be damaged internally.
2 If you use improper screw, the product might be dam-
aged and drop from mounted position.
In this case, LG Electronics is not responsible for it.
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
yDisconnect the power cord first, and then move
or install the Monitor set. Otherwise electric
shock may occur.
yIf you install the Monitor set on a ceiling or
slanted wall, it may fall and result in severe
injury.
yUse only an authorized LG wall mount and
contact the local dealer or qualified personnel.
y Do not over tighten the screws as this may
cause damage to the Monitor set and void your
warranty.
y Use only screws and wall mounts that meet
the VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
yScrew length from outer surface of back cover
should be under 8mm.
yUse the screws that are listed on the VESA
standard screw specifications.
yThe wall mount kit will include an installation
manual and necessary parts.
yThe wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
yThe length of screws may differ depending on
the wall mount. Be sure to use the proper length.
yFor more information, refer to the instructions
supplied with the wall mount.
CAUTION
NOTE
Back Cover
Wall mount Pad
Wall mount Pad
Back Cover
Standard screw
Max.8mm
yWall Mount (A x B)
A
B
Wall Mount (A x B) 75 x 75
Standard screw M4
Number of screws 4
10
ENGLISH
USING THE MONITOR SET
Connecting to a PC
yYour Monitor set supports Plug & Play*.
*Plug & Play: A PC recognizes a connected device
that users connect to a PC and turn on, without
device configuration or user intervention.
D-SUB connection
Transmits analog video from your PC to the Monitor
set.
NOTE
yMac adapter
For Apple Macintosh use, a separate plug adapter
is needed to change the 15 pin high density (3
row) D-SUB VGA connector on the supplied cable
to a 15 pin 2 row connector.
yWhen using a D-Sub signal input cable connector
for Macintosh
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set.
yIf you use HDMI PC, it can cause compatibility
problem.
yUse a certified cable with the HDMI logo attached.
If you do not use a certified HDMI cable, the
screen may not display or a connection error may
occur.
yRecommended HDMI cable types
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
NOTE
NOTE
yWhen you want to use two PC in our Monitor,
please connect the signal cable(D-SUB/HDMI)
respectively in Monitor set.
yIf you turn the Monitor set on while it is cold, the
screen may flicker. This is normal.
ySome red, green, or blue spots may appear on the
screen. This is normal.
11
ENG
ENGLISH
Connecting to AV Devices
HDMI connection
Transmits the digital video and audio signals from your
AV devices to the monitor.
yIf you use HDMI PC, it can cause compatibility
problem.
yUse a certified cable with the HDMI logo attached.
If you do not use a certified HDMI cable, the
screen may not display or a connection error may
occur.
yRecommended HDMI cable types
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
NOTE
yPeripheral devices are sold separately.
yIf you use angled headphones, it may cause a
problem with connecting another external device
to the monitor. Therefore, it is recommended to
use straight headphones.
Angle Type Straight Type
NOTE
yDepending on the audio settings of the PC and
external device, headphones and speaker func-
tions may be limited.
Connecting Peripherals
Connecting Headphones
Connect peripherals to the monitor via the headphones
port. Connect as illustrated.
12
ENG
ENGLISH
CUSTOMIZING SETTINGS
Activating the Main Menu
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3 Press the joystick button once more to close the main menu.
Joystick Button
Button Menu Status Description
Picture Mode
Main menu disabled Enables the main menu.
Main menu enabled Close the main menu.
(Long press the button to turn off the monitor)
Picture Mode
◄Main menu disabled Adjusts the monitor volume level. (for HDMI only)
Main menu enabled Enters the input features.
►
Main menu disabled Adjusts the monitor volume level. (for HDMI only)
Main menu enabled Enters the Settings feature.
Picture Mode
▲Main menu disabled Enters the Accessibility menu.
Main menu enabled Turns off the monitor.
▼Main menu disabled Enters the Accessibility menu.
Main menu enabled Enters the picture mode feature. (for HDMI only)
Main Menu Features
Main Menu Description
Settings Configures the screen settings.
Picture Mode Select picture mode to achieve the best display ef-
fect.
Input Sets input mode.
Power Off Turns off the monitor.
Exit Exits the main menu.
Settings
Picture Mode
(for HDMI only)
NOTE
yYour monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yWhen Beep Guide is activated, pressing the joystick button will take you to Settings right away.
13
ENG
ENGLISH
Customizing settings
Settings > Quick Settings Description
Brightness Adjusts the contrast and brightness of the screen.
Contrast
Volume Adjusts the volume.(for HDMI only)
NOTE
yYou can adjust Mute/ Unmute by moving the joystick button to ▼ in the Volume menu.
Settings > Input Description
Input List Selects the input mode.
Aspect Ratio Adjusts the aspect ratio of the screen.
Full Wide Displays the video in wide-screen, regardless of the video signal input.
Original Displays video according to the aspect ratio of the video signal input.
NOTE
yThe options may disabled at the recommended resolution (1920 x 1080).
14
ENG
ENGLISH
Customizing settings
NOTE
yThis is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please turn off
this function.
yThis function can’t distinguish some colors in some images.
Settings > Pic-
ture Description
Picture Mode Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Reader Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.
Photo Optimizes the screen to view photos.
Cinema Optimizes the screen to improve the visual effects of a video.
Color Weak-
ness
This mode is for users who cannot distinguish between red and green. It enables users with
color weakness to easily distinguish between the two colors.
Game Optimizes the screen for gameplay.
Picture Adjust Brightness Adjusts the contrast and brightness of the screen.
Contrast
Sharpness Adjusts the sharpness of the screen.
SUPER
RESOLUTION+
High Optimized picture quality is displayed when a user wants crystal clear images. It is
effective forhigh quality video or game.
Middle The optimized picture quality is displayed when a user wants images between low
and high modes for comfortable viewing. It is effective for UCC or SD video.
Low The optimized picture quality is displayed when a user wants smooth and natural
images. It is effective for slow -moving pictures or still images.
Off Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this
mode.
Black Level Sets the offset level (for HDMI only).
yOffset: as a reference for a video signal, this is the darkest color the monitor can display.
High Keeps the current contrast ratio of the screen.
Low Lowers the black levels and raises the white levels from the current contrast ratio of the
screen.
DFC On Adjusts the brightness automatically according to the screen.
Off Disables the DFC feature.
15
ENG
ENGLISH
Game Adjust Response Time Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Fast.
For a fast-moving picture, it is recommended that you use Faster.
Setting to Faster may cause image sticking.
Faster Sets the response time to faster.
Fast Sets the response time to fast.
Normal Sets the response time to normal.
Off Does not use the response time improvement feature.
FreeSync
Provides seamless and natural images by synchronizing the vertical frequency of the input sig-
nal with that of the output signal.
CAUTION
ySupported Interface: HDMI.
ySupported Graphic Card : A graphic card that supports AMD’s FreeSync is necessary.
ySupported Version : Make sure to update the graphic card to the latest driver.
yFor more information and requirement, refer to AMD website at http://www.amd.com/
FreeSync
On FreeSync function on.
Off FreeSync function off.
Black
Stabilizer Black Stabilizer:
You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen.
(You can easily distinguish objects on dark game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic
contrast on the screen.
Cross Hair Cross Hair provides a mark on the center of the screen for First Person Shooter(FPS) games.
Users can select the cross hair that fits their gaming environment among four different cross
hairs.
yWhen the monitor is off or enters energy saving mode, the Cross Hair feature is
automatically turned off.
Color Adjust Gamma Mode 1, Mode 2,
Mode 3
The higher the gamma value, the darker the image becomes. Likewise, the
lower the gamma value, the lighter the image becomes.
Mode 4 If you do not need to adjust the gamma settings, select Mode 4.
Color Temp Selects the factory default picture color.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Custom: The user can adjust it to red, green or blue by customization.
Red/Green/
Blue You can customize the picture color using Red, Green, and Blue colors.
Configuration
Adjust
(D-SUB only)
Horizontal To move image left and right.
Vertical To move image up and down.
Clock To minimize any vertical bars or stripes visible on the screen background.The horizontal screen
size will also change.
Phase To adjust the focus of the display. This item allows you to remove any horizontal noise and clear
or sharpen the image of characters.
Resolution
(D-SUB only)
User can set the desired resolution.This option is enabled only when the screen resolution on your computer is set
to the following(D-SUB only).
NOTE
The function is enabled only when the screen resolution on your computer is set to the following, except that
the PC output wrong resolution.
1024x768, 1280x768, 1360x768, 1366x768,Off
1280x960, 1600x900,Off
1440x900, 1600x900,Off
Picture Reset Do you want to reset your settings?
No Cancel the select.
Yes Returns to the default settings.
16
ENG
ENGLISH
Customizing settings
Settings > General Description
Language To choose the language in which the control names are displayed.
SMART ENERGY
SAVING
High Saves energy using the high-efficiency SMART ENERGY SAVING feature.
Low Saves energy using the low-efficiency SMART ENERGY SAVING feature.
Off Disables the SMART ENERGY SAVING feature.
Automatic Standby The monitor will automatically switch to standby mode after a certain period.
OSD Lock Prevents incorrect key input.
On Key input is disabled.
NOTE
yAll function except for the OSD Lock mode, brightness, Contrast, Input, Information and Volume are
disabled.
Off Key input is enabled.
Information The display information will be shown the Model, Serial Number, Total Power On Time, Resolution.
Reset Do you want to reset your settings?
No Cancel the select.
Yes Returns to the default settings.
ySaving Data depends on the Panel. So, those values should be different from each panel and panel vendor. If you select the op-
tion of SMART ENERGY SAVING is High or Low, monitor luminance become lower or higher depend on source.
NOTE
17
ENG
ENGLISH
TROUBLESHOOTING
yCheck Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes,
readjust the video card to the recommend resolution.
yIf the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be
dimmed, truncated or biased. Make sure to select the recommend resolution.
yThe setting method can differ by computer and O/S (Operation System), and resolution mentioned above may
not be supported by the video card performance. In this case, please ask to the computer or the video card
manufacturer.
yKeep proper posture when using the monitor, otherwise the screen may not be optimized.
CAUTION
The screen is flickering.
Did you select the recommended
resolution?
yIf the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering.
Change the resolution to the recommended resolution 1080P.
Display image is incorrect
The screen color is mono or abnormal.
yCheck if the signal cable is properly connected and use a screwdriver to fasten if
necessary.
yMake sure the video card is properly inserted in the slot.
ySet the color setting higher than 24 bits (true color) at Control Panel ► Settings.
The screen blinks.
yCheck if the screen is set to interlace mode and if yes, change it to the recommend
resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver?
yBe sure to install the display driver from our web site:
http://www.lg.com
.
yMake sure to check if the video card supports Plug&Play function.
Check the following before calling for service.
No image appears
Is the power cord of the display
connected?
yCheck and see if the power cord is connected properly to the power outlet.
Do you see an "Out of Range" message
on the screen?
yThis message appears when the signal from the PC (video card) is out of horizontal or
vertical frequency range of the display. See the 'Specifications' section of this manual
and configure your display again.
Do you see a "NO SIGNAL" message on
the screen or black screen?
yAfter the monitor is on "NO SIGNAL", the monitor goes to DPM mode.
yThis is displayed when the signal cable between the PC and the monitor is missing or
disconnected. Check the cable and reconnect it.
yCheck PC status.
Can't you control some functions in OSD?
Can't you select some menu in
OSD?
yYou can unlock the OSD controls at any time by entering the OSD lock menu and
changing items to off.
18
ENGLISH
SPECIFICATIONS
LCD Screen Type TFT (Thin Film Transistor)
LCD(Liquid Crystal Display) Screen
Resolution Maximum Resolution 1920 x 1080 @ 75 Hz (HDMI)
1920 x 1080 @ 60 Hz (D-sub)
Recommended Resolution 1920 × 1080 @ 60 Hz
Power Input 19 V 1.3 A
Power Consumption On Mode : 22 W Typ. ( Outgoing condition ) *
Sleep Mode (Standby Mode) ≤ 0.3 W **
Off Mode ≤ 0.3 W
AC/DC adaptor Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25SFA-19-3 19025E, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSF-19 19025EPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSF-19 19025EPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSF-19 19025EPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSF-19 19025EPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSF-19 19025EPB-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type WA-24C19FS, manufactured by Asian Power Devices Inc.
or Type WA-24C19FU, manufactured by Asian Power Devices Inc.
or Type WA-24C19FK, manufactured by Asian Power Devices Inc.
or Type WA-24C19FB, manufactured by Asian Power Devices Inc.
or Type WA-24C19FN, manufactured by Asian Power Devices Inc.
or Type DA-24B19, manufactured by Asian Power Devices Inc.
or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd.
or Type AD2139S20, manufactured by PI Electronics (H.K.) Ltd.
or Type AD2139620, manufactured by PI Electronics (H.K.) Ltd.
OUTPUT: 19 V 1.3 A
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
Less than 80%
Storage Temperature
Storage Humidity
-20 °C to 60 °C
Less than 85 %
Dimension Monitor Size (Width x Height x Depth)
With Stand 509.6 mm x 395.8 mm x 181.9 mm
Without Stand 509.6 mm x 305.7 mm x 38.5 mm
Weight (Without
Packaging)
With Stand 2.8 Kg
Without Stand 2.5 Kg
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard(Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
22MN430M
19
ENG
ENGLISH
SPECIFICATIONS
LCD Screen Type TFT (Thin Film Transistor)
LCD(Liquid Crystal Display) Screen
Resolution Maximum Resolution 1920 x 1080 @ 75 Hz (HDMI)
1920 x 1080 @ 60 Hz (D-sub)
Recommended Resolution 1920 × 1080 @ 60 Hz
Power Input 19 V 1.3 A
Power Consumption On Mode : 26 W Typ. ( Outgoing condition ) *
Sleep Mode (Standby Mode) ≤ 0.3 W **
Off Mode ≤ 0.3 W
AC/DC adaptor Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25SFA-19-3 19025E, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSF-19 19025EPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSF-19 19025EPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSF-19 19025EPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSF-19 19025EPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSF-19 19025EPB-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type WA-24C19FS, manufactured by Asian Power Devices Inc.
or Type WA-24C19FU, manufactured by Asian Power Devices Inc.
or Type WA-24C19FK, manufactured by Asian Power Devices Inc.
or Type WA-24C19FB, manufactured by Asian Power Devices Inc.
or Type WA-24C19FN, manufactured by Asian Power Devices Inc.
or Type DA-24B19, manufactured by Asian Power Devices Inc.
or Type AD2139620, manufactured by PI Electronics (H.K.) Ltd.
OUTPUT: 19 V 1.3 A
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
Less than 80%
Storage Temperature
Storage Humidity
-20 °C to 60 °C
Less than 85 %
Dimension Monitor Size (Width x Height x Depth)
With Stand 555 mm x 421 mm x 181.9 mm
21.8 inches x 16.5 inches x 7.1 inches
Without Stand 555 mm x 330.9 mm x 38.4 mm
21.8 inches x 13.0 inches x 1.5 inches
Weight (Without
Packaging)
With Stand 3.1 kg (6.8 lbs)
Without Stand 2.8 kg (6.1 lbs)
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard(Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
24ML44B
20
ENG
ENGLISH
Preset Modes (Resolution)
D-sub PC Timing
Display Modes
(Resolution)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz) Polarity(H/V)
720 x 400 31.468 70.08 -/+
640 x 480 31.469 59.94 -/-
640 x 480 37.5 75 -/-
800 x 600 37.879 60.317 +/+
800 x 600 46.875 75 +/+
1024 x 768 48.363 60 -/-
1024 x 768 60.023 75.029 +/+
1152 x 864 67.500 75 +/+
1280 x 1024 63.981 60.023 +/+
1280 x 1024 79.976 75.035 +/+
1680 x 1050 65.290 59.954 -/+
1920 x 1080 67.500 60 +/+ Recommend Mode
HDMI PC Timing
Display Modes
(Resolution)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz) Polarity(H/V)
720 x 400 31.468 70.08 -/+
640 x 480 31.469 59.94 -/-
640 x 480 37.5 75 -/-
800 x 600 37.879 60.317 +/+
800 x 600 46.875 75 +/+
1024 x 768 48.363 60 -/-
1024 x 768 60.023 75.029 +/+
1152 x 864 67.500 75 +/+
1280 x 1024 63.981 60.023 +/+
1280 x 1024 79.976 75.035 +/+
1680 x 1050 65.290 59.954 -/+
1920 x 1080 67.500 60 +/+ Recommend Mode
1920 x 1080 83.89 74.97 +/+
21
ENG
ENGLISH
HDMI AV Timing
Factory support mode
(Preset Mode)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz) HDMI
480P 31.50 60 O
576P 31.25 50 O
720P 37.50 50 O
720P 45.00 60 O
1080P 56.25 50 O
1080P 67.50 60 O
Recommend Mode
22
ENG
ENGLISH
Beep Guide
Menu Location
Quick Settings 1
Quick Settings - Brightness 1 1
Quick Settings - Brightness 1 1 1 Slider
Quick Settings - Contrast 1 2
Quick Settings - Contrast 1 2 1 Slider
Quick Settings - Volume 1 3
Quick Settings - Volume 1 3 1 Slider
Quick Settings - Auto Configuration(only Dsub) 1 4
Quick Settings - Auto Configuration(only Dsub) -
No
1 4 1
Quick Settings - Auto Configuration(only Dsub) -
Yes
1 4 2
Input 2
Input - Input List 2 1
Input - Input List - D-SUB 2 1 1
Input - Input List - HDMI1 2 1 2
Input - Input List - HDMI2 2 1 3
Input - Aspect Ratio 2 2
Input - Aspect Ratio - Full Wide 2 2 1
Input - Aspect Ratio - Original 2 2 2
Picture 3
Picture - Picture Mode 3 1
Picture - Picture Mode - Custom 3 1 1
Picture - Picture Mode - Reader 3 1 2
Picture - Picture Mode - Photo 3 1 3
Picture - Picture Mode - Cinema 3 1 4
Picture - Picture Mode - Color Weakness 3 1 5
Picture - Picture Mode - Game 3 1 6
Picture - Picture Adjust 3 2
Picture - Picture Adjust - Brightness 3 2 1
Picture - Picture Adjust - Brightness 3 2 1 1
Slider
Picture - Picture Adjust - Contrast 3 2 2
Picture - Picture Adjust - Contrast 3 2 2 1
Slider
Picture - Picture Adjust - Sharpness 3 2 3
Picture - Picture Adjust - Sharpness 3 2 3 1
Slider
Picture - Picture Adjust - SUPER RESOLUTION+ 3 2 4
Picture - Picture Adjust - SUPER RESOLUTION+ -
High
3 2 4 1
Menu Location
Picture - Picture Adjust - SUPER RESOLUTION+ -
Middle
3 2 4 2
Picture - Picture Adjust - SUPER RESOLUTION+ -
Low
3 2 4 3
Picture - Picture Adjust - SUPER RESOLUTION+ -
Off
3 2 4 4
Picture - Picture Adjust - Black Level 3 2 5
Picture - Picture Adjust - Black Level - High 3 2 5 1
Picture - Picture Adjust - Black Level - Low 3 2 5 2
Picture - Picture Adjust - DFC 3 2 6
Picture - Picture Adjust - DFC - On 3 2 6 1
Picture - Picture Adjust - DFC - Off 3 2 6 2
Picture - Game Adjust 3 3
Picture - Game Adjust - Response Time 3 3 1
Picture - Game Adjust - Response Time - Faster 3 3 1 1
Picture - Game Adjust - Response Time - Fast 3 3 1 2
Picture - Game Adjust - Response Time - Normal 3 3 1 3
Picture - Game Adjust - Response Time - Off 3 3 1 4
Picture - Game Adjust - FreeSync 3 3 2
Picture - Game Adjust - FreeSync - On 3 3 2 1
Picture - Game Adjust - FreeSync - Off 3 3 2 2
Picture - Game Adjust - Black Stabilizer 3 3 3
Picture - Game Adjust - Black Stabilizer 3 3 3 1
Slider
Picture - Game Adjust - Crosshair 3 3 4
Picture - Game Adjust - Crosshair - Red Cross 3 3 4 1
Picture - Game Adjust - Crosshair - Green Cross 3 3 4 2
Picture - Game Adjust - Crosshair - Red Dot 3 3 4 3
Picture - Game Adjust - Crosshair - Green Dot 3 3 4 4
Picture - Game Adjust - Crosshair - Off 3 3 4 5
Picture - Color Adjust 3 4
Picture - Color Adjust - Gamma 3 4 1
Picture - Color Adjust - Gamma - Mode 1 3 4 1 1
Picture - Color Adjust - Gamma - Mode 2 3 4 1 2
Picture - Color Adjust - Gamma - Mode 3 3 4 1 3
Picture - Color Adjust - Gamma - Mode 4 3 4 1 4
Picture - Color Adjust - Color Temp 3 4 2
Picture - Color Adjust - Color Temp - Custom 3 4 2 1
Picture - Color Adjust - Color Temp - Warm 3 4 2 2
23
ENG
ENGLISH
Menu Location
Picture - Color Adjust - Color Temp - Medium 3 4 2 3
Picture - Color Adjust - Color Temp - Cool 3 4 2 4
Picture - Color Adjust - Red 3 4 3
Picture - Color Adjust - Red 3 4 3 1
Slider
Picture - Color Adjust - Green 3 4 4
Picture - Color Adjust - Green 3 4 4 1
Slider
Picture - Color Adjust - Blue 3 4 5
Picture - Color Adjust - Blue 3 4 5 1
Slider
Picture - Configuration Adjust (Only D-sub) 3 5
Picture - Configuration Adjust (Only D-sub) -
Horizontal
3 5 1
Picture - Configuration Adjust (Only D-sub) -
Horizontal
3 5 1 1
Slider
Picture - Configuration Adjust (Only D-sub) -
Vertical
3 5 2
Picture - Configuration Adjust (Only D-sub) -
Vertical
3 5 2 1
Slider
Picture - Configuration Adjust (Only D-sub) -
Clock
3 5 3
Picture - Configuration Adjust (Only D-sub) -
Clock
3 5 3 1
Slider
Picture - Configuration Adjust (Only D-sub) -
Phase
3 5 4
Picture - Configuration Adjust (Only D-sub) -
Phase
3 5 4 1
Slider
Picture - Resolution(Only D-sub) 3 6
Picture - Resolution(Only D-sub) - 1024*768 3 6 1
Picture - Resolution(Only D-sub) - 1280*768 3 6 2
Picture - Resolution(Only D-sub) - 1360*768 3 6 3
Picture - Resolution(Only D-sub) - 1366*768 3 6 4
Picture - Resolution(Only D-sub) - Off 3 6 5
Picture - Resolution(Only D-sub) - 1280*960 3 6 1
Picture - Resolution(Only D-sub) - 1600*900 3 6 2
Picture - Resolution(Only D-sub) - Off 3 6 3
Picture - Resolution(Only D-sub) - 1440*900 3 6 1
Picture - Resolution(Only D-sub) - 1600*900 3 6 2
Picture - Resolution(Only D-sub) - Off 3 6 3
Picture - Picture Reset 3 7
Picture - Picture Reset - No 3 7 1
Picture - Picture Reset - Yes 3 7 2
General 4
General - Language 4 1
Menu Location
General - Language - English 4 1 1
General - Language - German 4 1 2
General - Language - French 4 1 3
General - Language - Spanish 4 1 4
General - Language - Italian 4 1 5
General - Language - Swedish 4 1 6
General - Language - Finnish 4 1 7
General - Language - Portuguese 4 1 8
General - Language - Portuguese (Brazil) 4 1 9
General - Language - Polish 4 1 10
General - Language - Russian 4 1 11
General - Language - Greek 4 1 12
General - Language - Ukrainian 4 1 13
General - Language - Chinese 4 1 14
General - Language - Traditional Chinese 4 1 15
General - Language - Japanese 4 1 16
General - Language - Korean 4 1 17
General - Language - Hindi 4 1 18
General - Smart Energy Saving 4 2
General - Smart Energy Saving - High 4 2 1
General - Smart Energy Saving - Low 4 2 2
General - Smart Energy Saving - Off 4 2 3
General - Automatic Standby 4 3
General - Automatic Standby - 4H 4 3 1
General - Automatic Standby - 6H 4 3 2
General - Automatic Standby - 8H 4 3 3
General - Automatic Standby - Off 4 3 4
General - OSD Lock 4 4
General - OSD Lock - On 4 4 1
General - OSD Lock - Off 4 4 2
General - Information 4 5
General - Information 4 5 1
General - Reset 4 6
General - Reset - No 4 6 1
General - Reset - Yes 4 6 2
The model and serial number of the SET is located on the back and
one side of the SET. Record it below should you ever need service.
MODEL
SERIAL
Supplier’s Declaration of Conformity
Trade Name LG
Responsible Party LG Electronics USA, Inc.
Address 111 Sylvan Avenue, North Building,
Englewood Cliffs,NJ 07632
E-mail lg.environmental@lge.com