Table of Contents
LG 24CN650N-6A User Manual
Displayed below is the user manual for 24CN650N-6A by LG which is a product in the All-in-One PCs/Workstations category. This manual has pages.
Related Manuals
2
ENGLISH
TABLE OF CONTENTS
LICENSE .........................................................3
IMPORTANT PRECAUTIONS ...........................3
OPEN SOURCE SOFTWARE NOTICE
INFORMATION ...............................................9
BEFORE READING THE OWNER’S MANUAL ....9
ASSEMBLING AND PREPARING ...................10
USING THE MONITOR ...................................19
USER SETTINGS ...........................................23
TROUBLESHOOTING ....................................27
PRODUCT SPECIFICATION ............................29
3
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI, HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc.
(Wi-Fi/Bluetooth supported models
only.)
*
IMPORTANT PRECAUTIONS
This unit has been engineered and manufactured to ensure your personal safety, however improper use may
result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its installation, use, and servicing.
•Please use the product in the proper environment to extend the product lifespan. Use the product in a safe
and stable place.
•The warranty does not cover any damage resulting from reckless use or use in undesirable environments.
•LG Electronics Inc. does not provide warranty for data loss. In order to minimise damage from data loss,
please make backup copies of important data.
•Manufacturers and installers cannot provide services related to human safety as this wireless device may
cause radio interference.
4
ENGLISH
On Safety
•Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is
certified by the applicable national standards if not being provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or the nearest authorised repair service provider for a
replacement.
•The Power Cord is used as the disconnect device.
•Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is
easily accessible.
•Operate the display only from a power source indicated in the specifications of this manual or listed on the
display. If you are not sure what type of power supply you have in your home, consult with your dealer.
•Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They
may result in a shock or fire hazard. Call your service technician for replacement.
•As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if
the unit is turned off.
Do not Open the Display:
•There are no user serviceable components inside.
•There are Dangerous High Voltages inside, even when the power is OFF.
•Contact your dealer if the display is not operating properly.
•Do not attempt to disassemble, repair or modify the product yourself.
-If dropped, the product may be damaged or cause an injury.
To Avoid Personal Injury:
•Do not place the display on a sloping shelf unless properly secured.
•Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product
screen.
-It can cause injury to human, problem to product and damage the display.
•If the LCD screen is damaged, do not touch LCD with your hands.
-Contact the service centre as it may cause an injury.
•Dispose of the desiccating agent and plastic wrap properly.
-The desiccating agent and plastic wrap may cause suffocation.
•When you upgrade the product, ensure that children will not swallow any parts including bolts.
-If a child swallows a nut, he or she may suffocate.
-In that case, seek emergency help immediately.
5
ENGLISH
To Prevent Fire or Hazards:
•Always turn the display OFF if you leave the room for more than a short period of time. Never leave the
display ON when leaving the house.
•Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry
hazardous voltages.
•Do not add accessories that have not been designed for this display.
•When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.
•In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very
dangerous. It can cause electric shock.
•Do not place any objects within 38 cm (15 inches) of the product.
-Lack of ventilation may overheat the product from inside and put users at risk of burn injuries.
•Do not connect a key-phone line to a wired LAN port.
-A fire may occur or the product may get damaged.
•Keep the product away from heat-emitting devices such as a heater.
-The product may get deformed or catch on fire.
•Do not put in metal items such as coins, hair pin or other irons or inflammables such as paper or matches.
Especially, ensure that children will not do so.
-There is a risk of product damage, fire, or electric shock.
-If any foreign substance gets in the product, unplug the product and contact the local service centre.
On Installation
•Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power
cord is subject to damage.
•Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
•Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during
operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard.
Therefore, NEVER:
-Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
-Place the display in a built-in enclosure unless proper ventilation is provided.
-Cover the openings with cloth or other material.
-Place the display near or over a radiator or heat source.
•Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active
Matrix LCD permanently.
•Do not press the LCD screen with your finger for a long time as this may cause some afterimages.
•Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or
effect on the display performance.
•If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used
under any mode except the recommended resolution, some scaled or processed images may appear on the
screen. However, this is characteristic of the fixed-resolution LCD panel.
6
ENGLISH
•Displaying a still image for long time on the monitor may leave persistent image or stain on the monitor
screen. To avoid this problem, use a screen saver and power off when this product is not used. Persistent
image or stain caused by long time usage are not covered by the warranty on this product.
•Do not shock or scratch the front and sides of the screen with metallic objects.
-Otherwise, it may cause damage to the screen.
•Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the
damaged product can cause electric shock or fire. Contact an authorised the service centre for repair.
•Avoid high temperatures and humidity.
•Do not install this product on a wall if it could be exposed to oil or oil mist.
-This may damage the product and cause it to fall.
•For displays with glossy bezels the user should consider the placement of the display as the bezel may cause
disturbing reflections from surrounding light and bright surfaces.
•Do not use products using high voltage around the Monitor, (ex. Electrical Swatter).
-Monitor may have malfunction as its electrical shock.
•Use the product in a clean, dust-free environment.
-Otherwise, the system may not function properly.
•Do not use the product in damp places like a laundry room or bathroom.
-Moisture may cause a glitch or electric shock.
Precautions to the AC Adapter and Power
•If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect
the power cord immediately and contact the service centre.
-Otherwise, this may cause a fire or electric shock due to damage to the product.
•Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and
dry them before use.
-Otherwise, this may cause a fire or electric shock.
•Make sure to completely insert the power cord into the AC adapter.
-If loosely connected, the poor connection may cause a fire or electric shock.
•Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc.
-The use of non-approved products may cause a fire or electric shock.
•When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive
force.
-The power line can be damaged, which may cause electric shock or fire.
7
ENGLISH
•Be careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC
adapter. Be careful not to damage the power cord or AC adapter with sharp objects.
-Damaged power cords may cause a fire or electric shock.
•Never disassemble, repair or modify the power cord or AC adapter.
-This may cause a fire or electric shock.
•Be sure to keep the outlet, AC adapter, and pins of the power plug clean from dust and etc.
-This may cause a fire.
•When lightning flashes in your area, disconnect the power, wired LAN and other connections.
-An electric shock or fire may occur.
•If you detect or smell smoke from the product, stop use immediately and disconnect the power source before
contacting your local service centre.
-A fire may occur.
•As the AC adapter can be hot, do not touch it with bare skin while using it.
-An extended period of exposure may cause a burn.
Precautions in Using
•Do not store or use the product near a magnetic object (i.e. a bag with a magnetic object, a diary, a wallet, a
memo board, high-powered speakers, a bracelet, or etc.).
-Otherwise, the storage device (SSD) and the system may be damaged, and the system may fail to operate
properly.
•Operate the product where there is no electromagnetic interference.
-Keep a proper distance between the product and electronic appliances such as radios or speakers that
generate strong magnetic fields.
-Otherwise, data may be lost from the storage device (SSD) or the LCD color may be damaged.
•Do not impose excessive force on the LCD screen or drop it.
-You may break the LCD glass panel.
•When handling product parts, follow the instructions in the manual.
-Otherwise, the product may get damaged.
•Install an anti-virus program on your product and do not download illegal programs nor access any corruptive
web sites such as those with pornographic content.
-The system may be infected and impaired.
8
ENGLISH
•Do not insert devices other than designated ones in the ports.
-Otherwise, the product may get damaged.
•Please use parts certified by LG Electronics, Inc.
-Otherwise, a fire or product damage may occur.
•Handle devices and parts of the product with care.
-The product may get damaged.
•Do not drop any part or device of the product while disassembling it.
-If dropped, it may be damaged and cause an injury.
•Do not play PC games excessively.
-Playing a PC game for an extended period of time may cause a mental disorder. It may also inflict physical
impairments on the elderly and children.
•Do not put your finger or an object into product ports.
-An injury or electric shock may occur.
•Ask one of our engineers to run a safety check after your computer has been repaired.
-Otherwise, an electric shock or fire may occur.
•For minors, we recommend a program that blocks access to illegal or pornographic web sites.
-Minors' exposure to adult-only contents may inflict psychological instability or even trauma. Take extra
precaution for your children if the whole family is using this product.
•When upgrading your product, turn off the power and disconnect the power cable, battery, and LAN.
-There is a risk of electric shock or fire and the product may be damaged.
•Do not disassemble or modify the product arbitrarily.
-There is a risk of electric shock and the product may be no longer covered by the warranty.
•Handle the product with care to prevent loss of data from the storage device (SSD).
-Since the storage device is fragile, you need to back up your important data frequently.
-The manufacturer is not responsible for any storage device data loss caused by a user's mistake.
•Damage to the storage device (SSD) and data loss may occur when:
-External shocks are inflicted on the product while disassembling or installing it.
-The product is reset (i.e. restarted) or turned on again after a power outage while the storage device is
operating.
-The PC is infected with a virus, tainting the data irrecoverably.
-Abrupt turning-off of the PC can damage the PC.
-If the product is moved, shaken or exposed to external shock while the storage device is running, file
damage or bad sectors may occur.
•To minimise data loss resulting from storage device damage (SSD), frequently back up important data.
-The manufacturer is not responsible for any data loss.
9
ENGLISH
On Cleaning
•Clean the product with a proper agent and dry it completely before using it again.
-If the product is wet while used, an electric shock or fire may occur.
•Unplug the display before cleaning the face of the display screen.
•Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-
spraying may cause electrical shock.
•When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching.
Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may
occur. (Do not use chemicals such as benzene, paint thinners or alcohol.)
•Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too
much moisture may cause staining.
מים
ÁGUA
WATER CHEMICALS
On Repacking
•Do not throw away the carton and packing materials. They make an ideal container in which to transport the
unit. When shipping the unit to another location, repack it in its original material.
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
27CN650W, 27CN651W, 34CN650W, 34CN651W, 24CN650W
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.
com.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in
receipt of this information.
BEFORE READING THE OWNER’S MANUAL
For models equipped with SSD (solid state disk), stored data may be lost in the event of a malfunction due to
the nature of SSD. You must back up important user data in external storage devices (USB HDD, memory, etc.).
By the nature of this product, a malfunction in the mainboard may lead to the loss of stored data. Accordingly,
you must back up important user data in external storage devices (USB HDD, memory, etc.).
If you shut down the product before system loading is complete, it may not shut down properly. Shut down the
product once system loading is complete. (System loading takes about 1 to 2 minutes to complete, but it may
vary depending on the user environment.)
10
ENGLISH
ASSEMBLING AND PREPARING
CAUTION
•Always use genuine LG components to ensure safety and product performance.
•The product warranty will not cover damage or injury caused by the use of unauthorised components.
•It is recommended that use the supplied components.
•If you use generic cables not certified by LG, the screen may not display or there may be image noises.
•Illustrations in this document represent typical procedures, so they may look different from the actual
product.
•Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product.
(Doing so may damage the product.)
•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the
stand and could result in personal injury.
•When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
NOTE
•The components may look different from those illustrated here.
•Without prior notice, all product information and specifications contained in this manual are subject to
change to improve the performance of the product.
•To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
•The power cord provided may differ depending upon the region.
•Some games (online, 3D, 2D) may not be supported, and some high-resolution videos (including Full HD and
some HD videos) may stutter during playback.
Supported Software
You can download and install the latest version from the LGE website (www.lg.com).
-
11
ENGLISH
Product and Button Description
1
2
3 4
Front Adjust Button Functions Information
1Webcam activity status indicator 3Power Button
2Webcam 4Power Indicator
Power Indicator
Mode LED Color
PC On White
PC Sleep Blinking
PC Off Off
Webcam activity status indicator
Mode LED Color
Webcam enabled Green
Webcam disabled Off
12
ENGLISH
Button Description
(Menu) If the menu is inactive Activates the main menu.
If the menu is active Exits the OSD menu when the button is pressed.
If the menu is inactive Adjusts the volume level of the monitor.
If the menu is active Left directional key.
If the menu is inactive Adjusts the volume level of the monitor.
If the menu is active Right directional key.
If the menu is inactive Change the input signals.
* When the input signal is changed to PC, the PC is
turned on. (Depending on the PC setting)
If the menu is active Selects and confirms menus or options.
Down directional key.
Up directional key.
(Power button) HDMI input Turn the monitor power on/off.
PC input Turn the PC power on/off.
Connectors
CAUTION
•Take caution when handling the product as the SFP port’s protrusions are sharp and may injure your hand.
13
ENGLISH
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•Place the monitor in the original box or packing material before attempting to move it.
•Before moving or lifting the monitor, disconnect the power cord and all other cables.
•Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
•When holding the monitor, the screen should face away from you to prevent it from being scratched.
•When transporting the monitor, do not expose the monitor to shock or excessive vibration.
•When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
CAUTION
•Avoid touching the monitor screen as much as possible.
-This may result in damage to the screen or some of the pixels used to create images.
•If you use the monitor panel without the stand base, its button may cause the monitor to become unstable
and fall, resulting in damage to the monitor or human injury. In addition, this may cause the button to
malfunction.
Installing on a Table
•Lift the monitor and place it on the table in an upright position. Place the monitor at least 100mm away from
the wall to ensure sufficient ventilation.
A: 100mm
CAUTION
•Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
•Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•If you need another power cord, please contact your local dealer or the nearest retail store.
14
ENGLISH
Adjusting the Stand Height
1 Place the monitor mounted on the stand base in an upright position.
2 Handle the monitor with both hands for safety.
24/27CN65*
Max. 130mm
34CN65*
Max. 110mm
WARNING
•When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.
Adjusting the Angle
The angle of the screen can be adjusted forward or backward from -5° to 35° (24/27CN65*), -5° to 15°
(34CN65*) for a comfortable viewing experience.
1 Place the monitor mounted on the stand base in an upright position.
2 Adjust the angle of the screen.
WARNING
•To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
•Be careful not to touch or press the screen area when adjusting the angle of the monitor.
15
ENGLISH
Swivel stand
24/27CN65*
Swivel 355 degrees and adjust the angle of the monitor set to suit your view.
Pivot Feature
24/27CN65*
The pivot feature allows the monitor to rotate 90 degrees clockwise or counter-clockwise.
Head
Stand
WARNING
•To avoid scratching the stand base, do not use excessive force or speed when rotating the monitor using the
pivot feature, and make sure that the stand does not make contact with the monitor.
16
ENGLISH
1 Raise the monitor up to the maximum height.
2 Adjust the angle of the monitor in the direction of the arrow as shown in the figure.
3 Rotate the monitor clockwise or counter-clockwise as shown in the figure.
4 Complete the installation by rotating the monitor 90° as shown in the figure.
17
ENGLISH
NOTE
•Auto Pivot feature of the display is not supported.
•The screen can be rotated easily using the screen pivot shortcut key provided with your Windows operating
system. Note that some Windows versions and some graphics card drivers may use different settings for the
screen pivot key or may not support the pivot key at all.
•Windows operating system screen pivot shortcut key.
-0°: Ctrl + Alt + keyboard up key ( )
-90°: Ctrl + Alt + keyboard left key ( )
-180°: Ctrl + Alt + keyboard down key ( )
-270°: Ctrl + Alt + keyboard right key ( )
WARNING
•Take care when rotating the monitor if the cable is connected.
•To avoid injury to your fingers, do not put them between the screen and the stand base when turning the
monitor's screen.
Using the Kensington Lock
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
NOTE
•The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
18
ENGLISH
Installing on the Wall
Install the monitor at least 100mm away from the wall and leave about 100mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail
store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.
: 100mm
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount plate or other compatible devices.
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
Wall Mount (mm) 100 x 100
Standard screw M4 x L10
Number of screws 4
Wall Mount Plate (Optional) LSW149
NOTE
•A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable
for any accidents relating to the use of non-standard screws.
•The wall mount kit includes the installation guide and all necessary parts.
•The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
•The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product.
•For more information, please refer to the user manual for the wall mounting bracket
•Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
•Remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.
19
ENGLISH
CAUTION
•Unplug the power cord before moving or installing the monitor to avoid electric shock.
•Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could
lead to injury. Use an authorised LG wall mount and contact the local dealer or qualified personnel.
•To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation
instructions.
•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or
misuse of inappropriate components will not be covered by the product warranty.
•When measured from the back of the monitor, the length of each installed screw must be 8mm or less.
Wall Mount Plate
Back of the Monitor
Standard screw:
M4 x L10
Wall Mount Plate
Back of the Monitor
Max. 8mm
USING THE MONITOR
•Illustrations in this manual may differ from the actual product.
Press the ( ) button and then select the input option.
CAUTION
•Do not press the screen for a prolonged time. This may cause image distortion.
•Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC
screensaver if possible.
•When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet.
•The monitor may flicker when turned on in an area where the temperature is low. This is normal.
•Sometimes red, green, or blue spots may appear on the screen. This is normal.
20
ENGLISH
Connecting to a PC
•This monitor supports the * feature.
* : A feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.
HDMI Connection
Transmits digital video and audio signals from your PC to the monitor.
CAUTION
•Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
•Recommended HDMI cable types
-High Speed HDMI®/™ cable
-High Speed HDMI®/™ cable with Ethernet
Connecting monitor
DisplayPort Connection
Transmits the PC's digital video and audio signals to the monitor. Connect your monitor which is supported DP
using the DisplayPort cable.
NOTE
•There may be no video or audio output depending on the DP (DisplayPort) version of the PC.
USB-C connection
Transmits digital video and audio signals from your PC to the monitor.
NOTE
•DP Alternate Mode (DP over USB-C) are supported via USB-C Port.
•Features may not work properly depending on the connected device’s specifications and the environment.
•Connect Adapter to supply power to the Monitor.
21
ENGLISH
Connecting LAN
LAN connection
Connect the router or switch to the monitor.
NOTE
•The LAN cable is sold separately.
•The following LAN cable type can be used: Standard: IEEE 802.3 ETHERNET
•Connect the LAN cable and the peripheral devices to use the cloud monitor.
SFP connection
NOTE
•Only supports 1 Gbps module. (155 Mbps, 10 Gbps (SFP+) are not supported)
•When you choose the SFP module, refer to the compatibility list by SFP vendor.
•Use the same SFP module to connect both devices.
•Devices are sold separately.
Connecting AV Devices
HDMI Connection
HDMI transmits digital video and audio signals from your AV device to the monitor.
NOTE
•Connecting your PC to the monitor using the HDMI cable may cause device compatibility issues.
•Using a DVI to HDMI / USB-C to HDMI cable may cause compatibility issues.
•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
•Recommended HDMI cable types
-High Speed HDMI®/™ cable
-High Speed HDMI®/™ cable with Ethernet
Connecting Peripherals
USB Cable connection - PC
The USB port on the product functions as a USB hub.
CAUTION
•Cautions When Using a USB Device
-A USB device with an automatic recognition program installed, or that uses its own driver, may not be
recognised.
-Some USB devices may not be supported or may not work properly.
-It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supply is not
adequate, the USB device may not be recognised properly.)
22
ENGLISH
NOTE
•It is recommended you install all Windows Updates to keep your Windows up-to-date before connecting to
the product for use.
•Peripheral devices are sold separately.
•A keyboard, mouse, or USB device can be connected to the USB port.
•The charging speed may vary depending on the device.
Connecting Headphones
Connect peripherals to the monitor via the headphones port.
NOTE
•Peripheral devices are sold separately.
•Depending on the audio settings of the PC and external device, headphones and speaker functions may be
limited.
•If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Therefore, it is recommended to use straight earphones.
Angled Straight (Recommend)
23
ENGLISH
USER SETTINGS
NOTE
•Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
Activating the Main Menu
Monitor buttons
Menu Settings
1 To view the OSD menu, press the button and then enter the Settings.
2 Use the to adjust the options.
3 To return to the upper menu or set other menu items, press the or / it.
4 If you want to exit the OSD menu, press the button.
The applicable setting options are as shown below.
[Quick Settings] [Input] [Picture] [Sound] [General]
24
ENGLISH
[Quick Settings]
> [Quick Settings]
•[Brightness]: Adjusts the brightness of the screen.
•[Contrast]: Adjusts the contrast of the screen.
•[Volume]: Adjusts the volume level.
-You can adjust [Mute]/[Unmute] by key in the [Volume] menu.
•[Color Temp]: Set your own color temperature.
-[Custom]: The user can customise the red, green and blue color.
-[Warm]: Sets the screen color to a reddish tone.
-[Medium]: Sets the screen color to between a red and blue tone.
-[Cool]: Sets the screen color to a bluish tone.
[Input]
> [Input]
•[Input List]: Selects the input mode.
•[Aspect Ratio]: Adjusts the aspect ratio of the screen. The display may look the same for [Full Wide] and
[Original] options at the recommended resolution.
-[Full Wide]: Displays the video in widescreen, regardless of the video signal input.
-[Original]: Displays video according to the aspect ratio of the video signal input.
NOTE
•The ratio is disabled in the interlaced signal.
•The display may look the same for [Full Wide], [Original] options at the recommended resolution.
[Picture]
> [Picture] > [Picture Mode]
•[Custom]: Allows the user to adjust each element. The color mode of the main menu can be adjusted.
•[Reader]: Optimises the screen for reading documents.
•[Photo]: Optimises the screen to view photos.
•[Cinema]: Optimises the screen to improve the visual effects of a video.
•[Color Weakness]: This mode is for users who cannot distinguish between red and green. It enables users
with color weakness to easily distinguish between the two colors. This is subsidiary for color weakness
user. Therefore if you feel uncomfortable with the screen, please turn off this function. This function can’t
distinguish some colors in some images.
•[Game]: Optimises the screen for gameplay.
25
ENGLISH
> [Picture] > [Picture Adjust]
•[Brightness]: Adjusts the brightness of the screen.
•[Contrast]: Adjusts the contrast of the screen.
•[Sharpness]: Adjusts the sharpness of the screen.
•[SUPER RESOLUTION+]: Because this is a function to increase the sharpness of low resolution pictures,
it is not recommended to use the function for normal text or for desktop icons. Doing so may result in
unnecessarily high sharpness.
-[High]: Optimises the screen for crystal clear images. Best for high-definition video or games.
-[Middle]: Optimises the screen for comfortable viewing, with images at the middle level between the low
and high modes. Best for UCC or SD videos.
-[Low]: Optimises the screen for smooth and natural images. Best for still images or images with less
movement.
-[Off]: Displays in the most common setting. Disables [SUPER RESOLUTION+].
•[Black Level]: Sets the offset level (for HDMI only).
Offset: as a reference for a video signal, this is the darkest color the monitor can display.
-[High]: Keeps the current contrast ratio of the screen.
-[Low]: Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
•[DFC]: Adjusts the brightness automatically according to the screen.
> [Picture] > [Game Adjust]
•[Response Time]: Sets a response time for displayed pictures based on the speed of the screen. For a normal
environment, it is recommended that you use [Fast]. For a fast-moving picture, it is recommended that you
use [Faster]. Setting to [Faster] may cause image sticking.
-[Faster]: Sets the response time to [Faster].
-[Fast]: Sets the response time to [Fast].
-[Normal]: Sets the response time to [Normal].
-[Off]: Does not use the response time improvement feature.
•[Black Stabilizer]: You can control the black contrast to have better visibility in dark scenes. Increasing the
[Black Stabilizer] value brightens the low gray level area on the screen. (You can easily distinguish objects on
dark game screens.) Reducing the [Black Stabilizer] value darkens the low gray level area and increases the
dynamic contrast on the screen.
26
ENGLISH
> [Picture] > [Color Adjust]
•[Gamma]
-[Mode 1], [Mode 2], [Mode 3]: The higher the gamma value, the darker the image becomes. Likewise, the
lower the gamma value, the lighter the image becomes.
-[Mode 4]: If you do not need to adjust the gamma settings, select [Mode 4].
•[Color Temp]: Set your own color temperature.
-[Custom]: The user can customise the red, green and blue color.
-[Warm]: Sets the screen color to a reddish tone.
-[Medium]: Sets the screen color to between a red and blue tone.
-[Cool]: Sets the screen color to a bluish tone.
•[Red], [Green], [Blue]: You can customise the picture color using [Red], [Green], and [Blue] colors.
> [Picture] > [Picture Reset]
•[Do you want to reset your settings?]
-[Yes]: Returns to the default settings.
-[No]: Cancel the reset.
[Sound]
> [Sound]
•[MaxxAudio]
-[On]: MaxxAudio® by Waves, recipient of a Technical GRAMMY Award® is a suite of studio-quality sound
tools for a superior listening experience.
-[Off]: Disables the [MaxxAudio] function.
•[Volume]: Adjusts the volume level.
-You can adjust [Mute]/[Unmute] by key in the [Volume] menu.
[General]
> [General]
•[Language]: Sets the menu screen to the desired language.
•[SMART ENERGY SAVING]: Conserve energy by using luminance compensation algorithm.
-[High]: Saves energy using the high-efficiency [SMART ENERGY SAVING] feature.
-[Low]: Saves energy using the low-efficiency [SMART ENERGY SAVING] feature.
-[Off]: Disables the feature.
-The value of energy saving data may differ depending on panel and panel suppliers.
-If you select the option of [SMART ENERGY SAVING] is [High] or [Low], monitor luminance become higher
or lower depend on source.
•[Automatic Standby]: If there is no operation on the monitor for a certain period of time, the monitor will
automatically switch to standby mode.
•[OSD Lock]: This feature disables the configuration and adjustment of menus.
-Deactivates all functions except [Brightness], [Contrast], [Volume], [Input List], [Information] and [OSD
Lock] menu.
•[Information]: The following display information will be shown; [Model], [Total Power On Time], [Serial
Number], [Resolution].
27
ENGLISH
TROUBLESHOOTING
Nothing is displayed on the screen.
•Is the monitor's power cord plugged in?
-Check if the power cord is correctly plugged into the power outlet.
•Is the power LED on?
-Check the power cable connection and press the power button.
•Is the power on and the power LED displaying white?
-Check that the connected input is enabled ( > [Input]).
•Is the [No Signal] message being displayed?
-This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check
the cable and reconnect it.
•Is the [Out of Range] message being displayed?
-This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical
frequency range of the monitor. Please see the Product Specification section of this manual to set the
appropriate frequency.
> [General] > [Reset]
•[Do you want to reset your settings?]
-[Yes]: Returns to the default settings.
-[No]: Cancel the reset.
28
ENGLISH
Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
•Did you select the appropriate resolution?
-If the selected resolution is HDMI 1080i 60/50Hz (interlaced), the screen may be flickering. Change the
resolution to 1080p or the recommended resolution.
-Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a
dimmed screen, a truncated display area or misalignment of the display.
-The setting methods may be different depending on the computer or operating system, and some
resolutions may not be available depending on the performance of the graphics card. If this is the case,
contact the manufacturer of the computer or graphics card for assistance.
•Does image sticking occur even when the monitor is turned off?
-Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention
of the image.
-To extend the lifetime of the monitor, use a screensaver.
•Are there spots on the screen?
-When using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This
is normal for an LCD screen. It is not an error, nor is it related to the monitor's performance.
Some features are disabled.
•Are some functions not available when you press the Menu button?
-The OSD is locked. Disable [OSD Lock] in [General].
Do you see an "Unrecognised monitor, Plug and Play (VESA DDC) monitor found" message?
•Have you installed the display driver?
-Be sure to install the display driver from our web site: http://www.lg.com.
-Make sure to check if the graphics card supports Plug and Play function.
No sound from the headphone port.
•Are images displayed without sound?
-Make sure that the headphone port connections are made properly.
-Try increasing the volume with keys.
-Set the audio output of the PC to the monitor you are using. (The settings may differ depending on the
operating system (OS) you use.)
29
ENGLISH
PRODUCT SPECIFICATION
Specifications are subject to change without notice.
Color Depth: 8-bit color is supported.
Resolution:
24/27CN65*
-Max Resolution: 1920 x 1080 @ 75 Hz
-Recommended Resolution: 1920 x 1080 @ 60 Hz
34CN65*
-Max Resolution: 2560 x 1080 @ 75 Hz
-Recommended Resolution: 2560 x 1080 @ 60 Hz
AC/DC Adapter:
•Model: ADS-110CL-19-3 190110G
•Manufacturer: Shenzhen Honor Electronic Co.,Ltd
-Output: 19 V 5.79 A
Environmental Conditions:
•Operating Conditions
-Temperature: 0 °C to 40 °C
-Humidity: Less than 80 %
•Storing Conditions
-Temperature: -20 °C to 60 °C
-Humidity: Less than 85 %
Dimensions (without packaging): Monitor Size (Width x Height x Depth)
24CN65*
•With Stand
-553.4 x 512.7 x 240 (mm)
•Without Stand
-553.4 x 332.7 x 59.4 (mm)
27CN65*
•With Stand
-622.3 x 531.7 x 239.6 (mm)
•Without Stand
-622.3 x 371.5 x 61.0 (mm)
34CN65*
•With Stand
-825.6 x 570.7 x 230 (mm)
•Without Stand
-825.6 x 374.8 x 60.5 (mm)
30
ENGLISH
Weight (without packaging):
24CN65*
•With Stand
-6.2 kg
•Without Stand
-4.1 kg
27CN65*
•With Stand
-7.8 kg
•Without Stand
-5.6 kg
34CN65*
•With Stand
-8.3 kg
•Without Stand
-6.6 kg
Power Sources:
24CN65*
•Power Rating: 19 V 3.5 A
•Power Consumption:
-On Mode: 25 W (Typical) (Outgoing condition)*
-Sleep Mode: ≤ 1.3 W
-Off Mode: ≤ 1.2 W
27CN65*
•Power Rating: 19 V 4.0 A
•Power Consumption:
-On Mode: 29 W (Typical) (Outgoing condition)*
-Sleep Mode: ≤ 1.3 W
-Off Mode: ≤ 1.2 W
34CN65*
•Power Rating: 19 V 5.0 A
•Power Consumption:
-On Mode: 39 W (Typical) (Outgoing condition)*
-Sleep Mode: ≤ 1.3 W
-Off Mode: ≤ 1.2 W
* The On Mode of Power Consumption is measured with LGE test standard. (Full White pattern, Maximum
resolution)
* The Power Consumption level can be different by operating condition and monitor setting.
31
ENGLISH
Wireless module (AC9560) Specifications
(Wi-Fi/Bluetooth supported models only.)
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range Output Power (Max.)
2400 to 2483.5MHz
5150 to 5350MHz
5470 to 5725MHz
5725 to 5850MHz
20.0dBm
22dBm
22dBm
13dBm
Bluetooth
Frequency Range Output Power (Max.)
2400 to 2483.5MHz 14dBm
•As band channels can vary per country, the user cannot change or adjust the operating frequency. This
product is configured for the regional frequency table.
•For consideration of the user, this device should be installed and operated with a minimum distance of
20cm between the device and the body.
32
ENGLISH
Factory Support Mode
(Preset Mode, HDMI)
24/27CN65*
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks
640 x 480 31.469 59.94 -/-
640 x 480 37.5 75 -/-
720 X 400 31.468 70.08 -/+
720 x 480 31.47 59.94 +/+
800 x 600 37.879 60.317 +/+
800 x 600 46.875 75.0 +/+
1024 x 768 48.363 60.0 -/-
1024 x 768 60.023 75.029 +/+
1152 x 864 67.500 75.000 +/+
1280 x 720 45 60 +/+
1280 x 800 49.702 60 -/+
1280 x 1024 63.981 60.023 +/+
1280 x 1024 79.976 75.035 +/+
1400 x 1050 65.317 59.978 -/+
1440 x 900 55.935 59.887 -/+
1600 x 900 60.000 60.000 +/+
1680 x 1050 65.290 59.954 -/+
1920 x 1080 67.50 60 +/+
1920 x 1080 83.89 74.97 +/+
33
ENGLISH
34CN65*
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks
640 x 480 31.469 59.94 -/-
640 x 480 37.5 75 -/-
720 x 480 31.47 59.94 +/+
800 x 600 37.879 60.317 +/+
800 x 600 46.875 75.0 +/+
832 x 624 49.727 74.553 -/-
1024 x 768 48.363 60.0 -/-
1024 x 768 60.123 75.029 +/+
1152 x 864 53.697 60 -/+
1152 x 870 68.68 75.06 -/-
1280 x 720 45 60 +/+
1280 x 800 49.702 60 -/+
1280 x 1024 63.981 60.02 +/+
1280 x 1024 79.976 75.025 +/+
1600 x 900 60.00 60.00 +/+
1680 x 1050 65.29 59.954 -/+
1920 x 1080 67.50 60 +/-
1920 x 1080 84.643 74.906 -/+
2560 x 1080 66.636 59.98 -/+
2560 x 1080 83.915 74.99 -/+
34
ENGLISH
HDMI Timing (Video)
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Remarks
480p 31.5 60
576p 31.25 50
720p 37.5 50
720p 45 60
1080p 56.25 50
1080p 67.50 60 Recommend
The model and serial number of the product are located on the back and on one side of the product.
Record them below in case you ever need service.
Model
Serial No.
27CN650W, 27CN651W, 34CN650W, 34CN651W, 24CN650W
WARNING: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.