Table of Contents
LG 24MP400-B User Manual
Displayed below is the user manual for 24MP400-B by LG which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
* LG LED Monitor applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and
retain it for future reference.
22MP400
24MP400
27MP400
24MP40B
24MP44B
OWNER’S MANUAL
LED LCD MONITOR
(LED Monitor*)
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved.
2
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc.
TABLE OF CONTENTS
LICENSE ...................................................... 2
ASSEMBLING AND PREPARING .................. 3
USING THE MONITOR .................................. 8
USER SETTINGS ........................................ 10
TROUBLESHOOTING ................................. 19
PRODUCT SPECIFICATION .........................20
3
ENGLISH
ASSEMBLING AND PREPARING
CAUTION
•Always use genuine LG components to ensure safety and product performance.
•The product warranty will not cover damage or injury caused by the use of unauthorized components.
•It is recommended that use the supplied components.
•If you use generic cables not certified by LG, the screen may not display or there may be image noises.
•Illustrations in this document represent typical procedures, so they may look different from the actual product.
•Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.)
•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
and could result in personal injury.
•When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
NOTE
•The components may look different from those illustrated here.
•Without prior notice, all product information and specifications contained in this manual are subject to change
to improve the performance of the product.
•To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
•The power cord provided may differ depending upon the region.
Supported Drivers and Software
You can download and install the latest version from the LGE website (www.lg.com).
Drivers and Software Installation Priority
Monitor Driver Recommended
OnScreen Control Recommended
4
ENGLISH
Product and Button Description
22MP400 24MP40B
24MP44B
24MP400
27MP400
Joystick Button Joystick Button
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/
down with your finger.
Basic Functions
Power on Press the joystick button once with your finger
to turn on the monitor.
Power off
Press and hold the joystick button once more
than 3 seconds with your finger to turn off the
monitor.
NOTE
•The joystick button is located at the bottom of the monitor.
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•Place the monitor in the original box or packing material before attempting to move it.
•Before moving or lifting the monitor, disconnect the power cord and all other cables.
•Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
•When holding the monitor, the screen should face away from you to prevent it from being scratched.
•When transporting the monitor, do not expose the monitor to shock or excessive vibration.
•When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
CAUTION
•Avoid touching the monitor screen as much as possible.
-This may result in damage to the screen or some of the pixels used to create images.
•If you use the monitor panel without the stand base, its joystick button may cause the monitor to become
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick
button to malfunction.
5
ENGLISH
Installing on a Table
•Lift the monitor and place it on the table in an upright position. Place the monitor at least 100mm away from
the wall to ensure sufficient ventilation.
22MP400
100 mm 100 mm
100 mm 100 mm
100 mm 100 mm
100 mm 100 mm
24MP40B
24MP44B
24MP400
27MP400
CAUTION
•Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
•Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•If you need another power cord, please contact your local dealer or the nearest retail store.
Adjusting the Angle
1 Place the monitor mounted on the stand base in an upright position.
2 Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing
experience.
Front
Rear
WARNING
•To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
•Be careful not to touch or press the screen area when adjusting the angle of the monitor.
6
ENGLISH
Using the Kensington Lock
The Kensington security system connector is located at the back of the Monitor set.
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
22MP400 24MP40B
24MP44B
24MP400
27MP400
NOTE
•The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount plate or other compatible devices.
NOTE
•The wall mount plate is sold separately.
•For more information on installation, refer to the wall mount plate’s installation guide.
•Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
•Remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.
Installing on the Wall
Install the monitor at least 100mm away from the wall and leave about 100mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail
store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.
22MP400 24MP400
27MP400
24MP40B
24MP44B
100 mm 100 mm
100 mm 100 mm
100 mm 100 mm
100 mm 100 mm
7
ENGLISH
CAUTION
•Unplug the power cord before moving or installing the monitor to avoid electric shock.
•Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead
to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or
misuse of inappropriate components will not be covered by the product warranty.
•When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.
Wall Mount Plate
Back of the Monitor
Standard screw:
M4 x L10
Wall Mount Plate
Back of the Monitor
Max. 8 mm
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
Wall Mount (mm) 75 x 75
Standard screw M4 x L10
Number of screws 4
Wall Mount Plate (Optional) LSW 149
NOTE
•A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable
for any accidents relating to the use of non-standard screws.
•The wall mount kit includes the installation guide and all necessary parts.
•The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
•The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product.
•For more information, please refer to the user manual for the wall mounting bracket.
8
ENGLISH
USING THE MONITOR
•Illustrations in this manual may differ from the actual product.
CAUTION
•Do not press the screen for a prolonged time. This may cause image distortion.
•Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC
screensaver if possible.
•When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet.
•The monitor may flicker when turned on in an area where the temperature is low. This is normal.
•Sometimes red, green, or blue spots may appear on the screen. This is normal.
Connecting to a PC
•This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.
D-SUB connection
Transmits analog video from your PC to the Monitor set.
NOTE
•When using a D-Sub signal input cable connector for Macintosh
•Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA
connector on the supplied cable to a 15 pin 2 row connector.
HDMI Connection
Transmits digital video and audio signals from your PC to the monitor.
CAUTION
•Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•Recommended HDMI cable types
-High-Speed HDMI®/TM cable
-High-Speed HDMI®/TM cable with Ethernet
9
ENGLISH
Connecting AV Devices
HDMI Connection
HDMI transmits digital video and audio signals from your AV device to the monitor.
NOTE
•Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•Recommended HDMI cable types
-High-Speed HDMI®/TM cable
-High-Speed HDMI®/TM cable with Ethernet
10
ENGLISH
USER SETTINGS
NOTE
•Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
Activating the Main Menu
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down and left/right to set the options.
3 Press the joystick button once more to exit the main menu.
Joystick Button
Button Menu Status Description
Main menu disabled Enables the main menu.
Main menu enabled Exits the main menu.
(Holding down the button more than 3 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.)
Main menu enabled Enters the Input features.
Main menu enabled Enters the Settings feature.
Main menu disabled Displays the information on the current input.
Main menu enabled Turns off the monitor.
Main menu disabled Displays the information on the current input.
Main menu enabled Enters the Picture Mode feature. (for HDMI only)
11
ENGLISH
Main Menu Features
Power Off
Input Settings
Picture Mode
Exit
(for HDMI only)
Power Off
Input Settings
Auto Configuration
Exit
(for D-SUB only)
Main Menu Description
Input Sets input mode.
Power Off Turns off the monitor.
Settings Configures the screen settings.
Picture Mode Sets the picture mode.
Exit Exits the main menu.
Auto Configuration Operate the Auto configuration for optimal display in D-SUB.
12
ENGLISH
Menu Settings
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.
2 Move the joystick up/down and left/right to set the options.
3 To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
4 If you want to exit the OSD menu, move the joystick to until you exit.
Quick Settings Input Picture General
13
ENGLISH
Customizing settings
Quick Settings
Settings > Quick Settings Description
Brightness
Adjusts the color contrast and brightness of the screen.
Contrast
Input
Settings > Input Description
Input List Selects the input mode.
Aspect Ratio
Adjusts the aspect ratio of the screen.
Full Wide Displays the video in wide-screen, regardless of the video signal input.
Original Displays video according to the aspect ratio of the video signal input.
NOTE
•The options may disabled at the recommended resolution (1920 x 1080).
14
ENGLISH
Picture
Settings > Picture Description
Picture Mode
Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Reader Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.
Photo Optimizes the screen to view photos.
Cinema Optimizes the screen to improve the visual effects of a video.
Color Weakness This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish
between the two colors.
Game Optimizes the screen for gameplay.
NOTE
•If the Picture Mode is changed, the screen may flicker or the resolution of your PC screen may be affected.
•This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please turn off this function.
•This function can’t distinguish some colors in some images.
15
ENGLISH
Settings > Picture Description
Picture Adjust
Brightness Adjusts the brightness of the screen.
Contrast Adjusts the contrast of the screen.
Sharpness Adjusts the sharpness of the screen.
SUPER RESOLUTION+
High Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high
quality video or game.
Middle The optimized picture quality is displayed when a user wants images between low and high modes
for comfortable viewing. It is effective for UCC or SD video.
Low The optimized picture quality is displayed when a user wants smooth and natural images. It is
effective for slow-moving pictures or still images.
Off Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this mode.
NOTE
•Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for
normal text or for desktop icons. Doing so may result in unnecessarily high sharpness.
Black Level
Sets the offset level (for HDMI only).
•Offset: as a reference for a video signal, this is the darkest color the monitor can display.
High Keeps the current contrast ratio of the screen.
Low Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
DFC On Adjusts the brightness automatically according to the screen.
Off Disables the DFC feature.
16
ENGLISH
Game Adjust
Response Time
Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Fast.
For a fast-moving picture, it is recommended that you use Faster.
Once Faster Mode is selected, Motion Blur may occur depending on the content.
Faster Sets the response time to faster.
Fast Sets the response time to fast.
Normal Sets the response time to normal.
Off Does not use the response time improvement feature.
FreeSync
Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.
CAUTION
•Supported Interface: HDMI
•Supported Graphic Card : A graphic card that supports AMD’s FreeSync is necessary.
•Supported Version : Make sure to update the graphic card to the latest driver.
•For more information and requirement, refer to AMD website at http://www.amd.com/FreeSync
On FreeSync function on.
Off FreeSync function off.
Black Stabilizer
You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark
game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.
Crosshair Crosshair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the Crosshair that fits
their gaming environment among four different cross hairs.
17
ENGLISH
Color Adjust
Gamma
Mode 1, Mode 2,
Mode 3
The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the
lighter the image becomes.
Mode 4 If you do not need to adjust the gamma settings, select Mode 4.
Color Temp
Selects the factory default picture color.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Custom: The user can adjust it to red, green or blue by customization.
Red
You can customize the picture color using Red, Green, and Blue colors.
Green
Blue
Configuration Adjust
(D-SUB only)
Horizontal To move image left and right.
Vertical To move image up and down.
Clock To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change.
Phase To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
Resolution
(D-SUB only)
User can set the desired resolution.This option is enabled only when the screen resolution on your computer is set to the following(D-SUB only).
NOTE
•The function is enabled only when the screen resolution on your computer is set to the following, except that the PC output wrong resolution.
1024 x 768, 1280 x 768, 1360 x 768, 1366 x 768, Off
1280 x 960, 1600 x 900, Off
1440 x 900, 1600 x 900, Off
Picture Reset Do you want to reset your settings?
No Cancel the select.
Yes Returns to the default settings.
18
ENGLISH
General
Settings > General Description
Language To choose the language in which the control names are displayed.
SMART ENERGY SAVING
High Enables SMART ENERGY SAVING you can save energy with this energy- high efficient.
Low Enables SMART ENERGY SAVING you can save energy with this energy- low efficient.
Off Disables SMART ENERGY SAVING .
* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.
Automatic Standby Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. (8H, 6H, 4H and Off)
OSD Lock
Prevents incorrect key input.
On Key input is disabled.
NOTE
•All features are disabled except Brightness, Contrast in Quick Settings, Input, OSD Lock and Information in General.
Off Key input is enabled.
Information The display information will be shown the Model, Total Power On Time, Serial Number, Resolution.
Reset Do you want to reset your settings? No Cancel the select.
Yes Returns to the default settings.
NOTE
•The value of energy saving data may differ depending on panel and panel suppliers.
•If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become lower or higher depend on source.
19
ENGLISH
TROUBLESHOOTING
Check the following before calling for service.
No image appears
Is the power cord of the display connected? •Check and see if the power cord is connected properly to the power outlet.
Do you see an "Out of Range" message on the screen? •This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this
manual and configure your display again.
Do you see a "NO SIGNAL" message on the screen? •After the monitor is on "NO SIGNAL", the monitor goes to DPM mode.
•This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
Can 't you control some functions in OSD?
Can't you select some menu in OSD? •You can unlock the OSD controls at any time by entering the OSD lock menu and changing items to off.
CAUTION
•Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
•If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
•The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card
manufacturer.
Display image is incorrect
The screen color is mono or abnormal. •Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.
•Make sure the video card is properly inserted in the slot.
•Set the color setting higher than 24 bits (true color) at Control Panel ► Settings.
The screen blinks. •Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver? •Be sure to install the display driver from our web site: http://www.lg.com.
•Make sure to check if the video card supports Plug&Play function.
The screen is flickering.
Did you select the recommended resolution? •If the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering. Change the resolution to the recommended resolution 1080P.
20
ENGLISH
PRODUCT SPECIFICATION
22MP400
Color Depth 8-bit color is supported.
Resolution Max Resolution 1920 x 1080 @ 75 Hz (HDMI)
1920 x 1080 @ 60 Hz (D-Sub)
Recommended Resolution 1920 x 1080 @ 60 Hz
Power Sources
Power Rating 19 V 1.3 A
Power Consumption
On mode: 18 W Typ. (Typical)*
Sleep Mode (Standby Mode) ≤ 0.3 W **
Off Mode ≤ 0.3 W
AC/DC adaptor
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25SFA-19-3 19025E, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPI-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPG-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPB-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type WA-24C19FS, manufactured by Asian Power Devices Inc.,
or Type WA-24C19FN, manufactured by Asian Power Devices Inc.,
or Type DA-24B19, manufactured by Asian Power Devices Inc.,
21
ENGLISH
AC/DC adaptor
or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd.,
or Type AD2139S20, manufactured by PI Electronics (H.K.) Ltd.,
or Type AD2139620, manufactured by PI Electronics (H.K.) Ltd..
Output: 19 V 1.3 A
Environmental Conditions
Operating Conditions Temperature 0 °C to 40 °C
Humidity Less than 80 %
Storing Conditions Temperature -20 °C to 60 °C
Humidity Less than 85 %
Dimensions
Monitor Size (Width x Height x Depth)
With Stand 509.6 x 393.2 x 190.0 (mm)
Without Stand 509.6 x 304.6 x 58.0 (mm)
Weight (Without Packaging) With Stand 2.4 kg
Without Stand 2.1 kg
Specifications are subject to change without notice.
The ~ symbol means alternating current, and the symbol means direct current.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
*** This monitor does not support sound output.
22
ENGLISH
PRODUCT SPECIFICATION
24MP400 24MP40B 24MP44B
Color Depth 8-bit color is supported.
Resolution Max Resolution 1920 x 1080 @ 75 Hz (HDMI)
1920 x 1080 @ 60 Hz (D-Sub)
Recommended Resolution 1920 x 1080 @ 60 Hz
Power Sources
Power Rating 19 V 1.3 A
Power Consumption
On mode: 19 W Typ. (Typical)*
Sleep Mode (Standby Mode) ≤ 0.3 W **
Off Mode ≤ 0.3 W
AC/DC adaptor
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25SFA-19-3 19025E, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPI-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPG-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPB-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type WA-24C19FS, manufactured by Asian Power Devices Inc.,
or Type WA-24C19FN, manufactured by Asian Power Devices Inc.,
or Type DA-24B19, manufactured by Asian Power Devices Inc.,
23
ENGLISH
AC/DC adaptor
or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd.,
or Type AD2139S20, manufactured by PI Electronics (H.K.) Ltd.,
or Type AD2139620, manufactured by PI Electronics (H.K.) Ltd..
Output: 19 V 1.3 A
Environmental Conditions
Operating Conditions Temperature 0 °C to 40 °C
Humidity Less than 80 %
Storing Conditions Temperature -20 °C to 60 °C
Humidity Less than 85 %
Dimensions
Monitor Size (Width x Height x Depth)
With Stand 539.9 x 414.4 x 190.0 (mm)
Without Stand 539.9 x 321.4 x 56.2 (mm)
Weight (Without Packaging) With Stand 2.6 kg
Without Stand 2.3 kg
Specifications are subject to change without notice.
The ~ symbol means alternating current, and the symbol means direct current.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
*** This monitor does not support sound output.
24
ENGLISH
PRODUCT SPECIFICATION
27MP400
Color Depth 8-bit color is supported.
Resolution Max Resolution 1920 x 1080 @ 75 Hz (HDMI)
1920 x 1080 @ 60 Hz (D-Sub)
Recommended Resolution 1920 x 1080 @ 60 Hz
Power Sources
Power Rating 19 V 1.3 A
Power Consumption
On mode: 22 W Typ. (Typical)*
Sleep Mode (Standby Mode) ≤ 0.3 W **
Off Mode ≤ 0.3 W
AC/DC adaptor
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25SFA-19-3 19025E, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPI-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPG-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type ADS-25FSF-19 19025EPB-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE,
or Type WA-24C19FS, manufactured by Asian Power Devices Inc.,
or Type WA-24C19FN, manufactured by Asian Power Devices Inc.,
or Type DA-24B19, manufactured by Asian Power Devices Inc.,
25
ENGLISH
AC/DC adaptor
or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd.,
or Type AD2139S20, manufactured by PI Electronics (H.K.) Ltd.,
or Type AD2139620, manufactured by PI Electronics (H.K.) Ltd..
Output: 19 V 1.3 A
Environmental Conditions
Operating Conditions Temperature 0 °C to 40 °C
Humidity Less than 80 %
Storing Conditions Temperature -20 °C to 60 °C
Humidity Less than 85 %
Dimensions
Monitor Size (Width x Height x Depth)
With Stand 612.0 x 454.9 x 190.0 (mm)
Without Stand 612.0 x 362.5 x 56.2 (mm)
Weight (Without Packaging) With Stand 3.4 kg
Without Stand 3.1 kg
Specifications are subject to change without notice.
The ~ symbol means alternating current, and the symbol means direct current.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
*** This monitor does not support sound output.
26
ENGLISH
Factory Support Mode (Preset Mode, PC)
D-SUB
Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks
720 x 400 31.468 70.08 -/+
640 x 480 31.469 59.94 -/-
640 x 480 37.5 75 -/-
800 x 600 37.879 60.317 +/+
800 x 600 46.875 75 +/+
1024 x 768 48.363 60 -/-
1024 x 768 60.023 75.029 +/+
1152 x 864 67.500 75 +/+
1280 x 1024 63.981 60.023 +/+
1280 x 1024 79.976 75.035 +/+
1680 x 1050 65.290 59.954 -/+
1920 x 1080 67.500 60 +/+ Recommend Mode
27
ENGLISH
HDMI
Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks
720 x 400 31.468 70.08 -/+
640 x 480 31.469 59.94 -/-
640 x 480 37.5 75 -/-
800 x 600 37.879 60.317 +/+
800 x 600 46.875 75 +/+
1024 x 768 48.363 60 -/-
1024 x 768 60.023 75.029 +/+
1152 x 864 67.500 75 +/+
1280 x 1024 63.981 60.023 +/+
1280 x 1024 79.976 75.035 +/+
1680 x 1050 65.290 59.954 -/+
1920 x 1080 67.500 60 +/+ Recommend Mode
1920 x 1080 83.89 74.97 +/+
28
ENGLISH
HDMI Timing (Video)
Factory support mode
(Preset Mode) Horizontal Frequency(kHz) Vertical Frequency(Hz) HDMI
480P 31.50 60 O
576P 31.25 50 O
720P 37.50 50 O
720P 45.00 60 O
1080P 56.25 50 O
1080P 67.50 60 O
Recommend Mode
The model and serial number of the product are located on the back and on one side of the product.
Record them below in case you ever need service.
Model
Serial No.