Table of Contents
LG 24MT48VF-PZ User Manual
Displayed below is the user manual for 24MT48VF-PZ by LG which is a product in the Hospitality TVs category. This manual has pages.
Related Manuals
Please read this manual carefully before operating your TV
and retain it for future reference.
www.lg.com
OWNER’S MANUAL
Safety and Reference
MT58* MT48* MT41*
LED TV*
*Disclaimer
LG LED TV applies LCD screen with LED backlights.
ENG
ENGLISH
2
Table of contents
3 Licenses
3 Open source software notice
information
3 Preparing
4 Lifting and moving the TV
4 Setting up the TV
4 Using the joystick button
4 -Basic functions
5 -Adjusting the menu
5 Mounting on a table
5 -Adjusting the angle of the TV to suit view
6 -Using the kensington security system
6 Mounting on a wall
6 -Separate purchase
(Wall mounting bracket)
7 Connections (notifications)
7 -Antenna connection
7 -Satellite dish connection
7 -CI module connection
7 -Euro scart connection
7 -Other connections
8 -Connecting to a PC
8 Remote control
9 Settings
14 To see web manual
15 Maintenance
15 -Cleaning your TV
15 -Screen, frame, cabinet and stand
15 -Power cord
15 -Preventing “Image burn” or “Burn-in” on
your TV screen
15 Troubleshooting
16 Specifications
ENGENGLISH
3
NOTE
yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
yThe available menus and options may differ from the input
source or product model that you are using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the
power consumption. And the TV should be turned off if it
will not be watched for some time, as this will reduce energy
consumption.
yThe energy consumed during use can be significantly reduced
if the level of brightness of the picture is reduced, and this will
reduce the overall running cost.
yThe items supplied with your product may vary depending on
the model.
yProduct specifications or contents of this manual may be
changed without prior notice due to upgrade of product
functions.
yFor an optimal connection, HDMI cables and USB devices
should have bezels less than 10 mm thick and 18 mm width.
Use an extension cable that supports USB 2.0 if the USB cable
or USB memory stick does not fit into your TV’s USB port.
A
B
A
B
*A
<
=
10 mm
*B
<
=
18 mm
yUse a certified cable with the HDMI logo attached. If you do
not use a certified HDMI cable, the screen may not display or a
connection error may occur.
yRecommended HDMI cable types
- High-Speed HDMI®/™ cable
- High-Speed HDMI®/™ cable with Ethernet
CAUTION
yDo not use any unapproved items to ensure the safety and
product life span.
yAny damage or injuries caused by using unapproved items are
not covered by the warranty.
ySome models have a thin film attached on to the screen and
this must not be removed.
Preparing
Licenses
Supported licenses may dier by model. For more information about
licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Denition Multimedia Interface,
and the HDMI logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
This DivX Certied® device has passed rigorous testing to ensure it
plays DivX® video.
To play purchased DivX movies, rst register your device at
vod.divx.com
. Find your registration code in the DivX VOD section of
your device setup menu.
DivX Certied® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certied® and associated logos are trademarks of DivX,
LLC and are used under license.
Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and
others available at [www.divx.com/patents]
Open source software
notice information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please
visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com. This oer is valid for three (3) years from the date
on which you purchased the product.
ENG
ENGLISH
4
Lifting and moving the TV
Please note the following advice to prevent the TV from being
scratched or damaged and for safe transportation regardless of its
type and size.
yIt is recommended to move the TV in the box or packing
material that the TV originally came in.
yBefore moving or lifting the TV, disconnect the power cord and
all cables.
yWhen holding the TV, the screen should face away from you to
avoid damage.
yHold the top and bottom of the TV frame firmly. Make sure not
to hold the transparent part, speaker, or speaker grill area.
yWhen transporting the TV, do not expose the TV to jolts or
excessive vibration.
yWhen transporting the TV, keep the TV upright, never turn the
TV on its side or tilt towards the left or right.
yDo not apply excessive pressure to cause flexing /bending of
frame chassis as it may damage screen.
CAUTION
yAvoid touching the screen at all times, as this may result in
damage to the screen.
yWhen handling the TV, be careful not to damage the
protruding joystick button. (Depending on model)
Using the joystick button
You can simply operate the TV functions, pressing or moving the
joystick button up, down, left or right.
yImage shown may differ from your TV.
Setting up the TV
CAUTION
yWhen attaching the stand to the TV set, place the screen facing
down on a cushioned table or flat surface to protect the screen
from scratches.
yDo not carry the monitor upside-down by holding the stand
body (or stand base) as this may cause it to fall off, resulting in
damage or injury.
NOTE
yRemove the stand before installing the TV on a wall mount
by performing the stand attachment in reverse. (Only MT58*,
MT48T, MT48DT)
yLift up the latch at the bottom of the stand base and detach
the stand base from the TV. (Only MT48D*, MT48V*, MT48U,
MT41*)
Basic functions
Power On
When the TV is turned o, place
your nger on the joystick button
and press it once and release it.
Power O
When the TV is turned on, place
your nger on the joystick button
and press it once for a few seconds
and release it. (However, if the
Menu button is on the screen,
pressing and holding the joystick
button will let you exit the Menu.)
Volume
Control
If you place your nger over the
joystick button and move it left or
right, you can adjust the volume
level you want.
Programmes
Control
If you place your nger over the
joystick button and move it up or
down, you can scrolls through the
saved programmes you want.
Joystick Button
Remote control
sensor
ENGENGLISH
5
Adjusting the menu
When the TV is turned on, press the joystick button one time. You
can adjust the Menu items moving the joystick button up, down, left
or right.
Turns the power o.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
Accesses the setting menu.
NOTE
yIf you press the joystick button first, you may not be able to adjust
the volume level and saved programmes.
CAUTION
yWhen your finger over the joystick button and push it to the up,
down, left or right, be careful not to press the joystick button.
Mounting on a table
yImage shown may differ from your TV.
1 Lift and tilt the TV into its upright position on a table.
-Leave a 100 mm (minimum) space from the wall for proper
ventilation.
100 mm
100 mm
100 mm
100 mm
2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
CAUTION
yDo not place the TV near or on sources of heat, as this may
result in fire or other damage.
yPlease be sure to connect the TV to the AC/DC power adapter
before connecting the TV’s power plug to a wall power outlet.
Adjusting the angle of the TV to suit view
yImage shown may differ from your TV.
(Only 22MT58*)
Tilt from -5° to 20° degrees up or down to adjust the angle of the TV
to suit your view.
Front Rear
20°
-5°
(Only 24/27MT58*)
Tilt from -2° to 15° degrees up or down to adjust the angle of the TV
to suit your view.
Front Rear
15°
-2°
CAUTION
yWhen you adjust the angle, do not hold the buttom of the TV
frame as shown on the following illustration, as may injure
your fingers.
ENG
ENGLISH
6
Using the kensington security system
(This is not available for all models.)
yImage shown may differ from your TV.
The Kensington security system connector is located at the rear of the
TV. For more information of installation and using, refer to the manual
provided with the Kensington security system or visit
http://www.kensington.com. Connect the Kensington security system
cable between the TV and a table.
NOTE
yThe Kensington security system is optional. You can obtain
additional accessories from most electronics stores.
Mounting on a wall
For proper ventilation, allow a clearance of 100 mm on each side and
from the wall. Detailed installation instructions are available from
your dealer, see the optional Tilt Wall Mounting Bracket Installation
and Setup Guide.
100 mm
100 mm
100 mm 100 mm
If you intend to mount the TV to a wall, attach Wall mounting
interface (optional parts) to the back of the TV.
When you install the TV using the wall mounting interface (optional
parts), attach it carefully so it will not drop.
1 If you use screw longer than standard, the TV might be damaged
internally.
2 If you use improper screw, the product might be damaged and
drop from mounted position. In this case, LG Electronics is not
responsible for it.
Separate purchase
(Wall mounting bracket)
Model
20MT48* / 22MT58*
22MT48* / 22MT41*
24MT58* / 24MT48*
24MT41*
27MT58*
28MT48*
28MT41*
29MT48*
Wall mount (A x B)
A
B75 x 75 100 x 100
Standard screw M4 x L10
Number of screws 4
Wall mount bracket
(optional)
RW120
CAUTION
yDisconnect the power first, and then move or install the TV.
Otherwise electric shock may occur.
yIf you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury.
yUse an authorized LG wall mount and contact the local dealer
or qualified personnel.
yDo not over tighten the screws as this may cause damage to
the TV and void your warranty.
yUse the screws and wall mounts that meet the VESA standard.
Any damages or injuries by misuse or using an improper
accessory are not covered by the warranty.
yScrew length from outer surface of back cover should be under
8 mm.
Wall mount Pad
Back Cover Standard screw
: M4 x L10
Wall mount Pad
Back Cover
Max.8 mm
NOTE
yUse the screws that are listed on the VESA standard screw
specifications.
yThe wall mount kit includes an installation manual and
necessary parts.
yThe wall mount bracket is optional. You can obtain additional
accessories from your local dealer.
yThe length of screws may differ depending on the wall mount.
Be sure to use the proper length.
yFor more information, refer to the instructions supplied with
the wall mount.
ENGENGLISH
7
Connections (notications)
Connect various external devices to the TV and switch input modes
to select an external device. For more information about an external
device’s connection, refer to the manual supplied with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
NOTE
yThe external device connection may differ from the model.
yConnect external devices to the TV regardless of the order of
the TV port.
yIf you record a TV programme on a DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a
DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
yRefer to the external equipment’s manual for operating
instructions.
yIf you connect a gaming device to the TV, use the cable
supplied with the gaming device.
yIn PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present,
change the PC output to another resolution, change the refresh
rate to another rate or adjust the brightness and contrast on
the Picture menu until the picture is clear.
yIn PC mode, some resolution settings may not work properly
depending on the graphics card.
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
yUse a signal splitter to use more than 2 TVs.
yIf the image quality is poor, install a signal amplifier properly
to improve the image quality.
yIf the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
yAn antenna cable and converter are not supplied.
ySupported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
Satellite dish connection
(Only satellite models)
Connect the TV to a satellite dish to a satellite socket with a satellite
RF cable (75 Ω).
CI module connection
(Depending on model)
View the encrypted (pay) services in digital TV mode.
yCheck if the CI module is inserted into the PCMCIA card slot in
the right direction. If the module is not inserted properly, this
can cause damage to the TV and the PCMCIA card slot.
yIf the TV does not display any video and audio when CI+ CAM
is connected, please contact to the Terrestrial/Cable/Satellite
Service Operator.
Euro scart connection
(Depending on model)
Transmits the video and audio signals from an external device to the
TV set. Connect the external device and the TV set with the euro scart
cable.
Output
Type
Current
input mode
AV1
(TV Out1)
Digital TV Digital TV
Analogue TV
Analogue TV
AV, HDMI
Component, RGB (Depending on model)
1 Outputs Analogue TV or Digital TV signals.
NOTE
yAny Euro scart cable used must be signal shielded.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
yUSB port supports 0.5 A electric current. If you need more
electric current in case of HDD, use the separate power adaptor.
NOTE
ySupported HDMI Audio format :
Dolby Digital (32 KHz, 44.1 KHz, 48 KHz),
PCM (32 KHz, 44.1 KHz, 48 KHz, 96 KHz, 192 KHz)
(Depending on model)
ENG
ENGLISH
8
Remote control
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
CAUTION
yDo not mix old and new batteries, as this may damage the
remote control.
yThe remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control
sensor on the TV.
A
(Power) Turns the TV on or o.
Selects Radio, TV and DTV programme.
Recalls your preferred subtitle in digital mode.
Turns the PIP mode on or o. (Depending on model)
By pressing the AD button, audio descriptions function will be
enabled.
Selects TV or PC mode.
(Inputs) Changes the input source.
B
Number buttons Enters numbers.
Accesses the saved programme list.
Returns to the previously viewed programme.
Adjusts the volume level.
Accesses your favourite programme list.
Shows programme guide.
Mutes all sounds.
Scrolls through the saved programmes.
Moves to the previous or next screen.
hri^Z`^\^_]
A
B
Connecting to a PC
yImage shown may differ from your TV.
Your TV supports the Plug and Play* feature and has the built-in
speakers with Virtual Surround that reproduces sound clearly with a
rich bass.
* Plug and Play: The function when a PC recognizes a connected device
that users connect to a PC and turn on, without device conguration
or user intervention.
NOTE
yIf you want to use HDMI-PC mode, you must set the Input
Label to PC mode.
yThe OSD (On Screen Display) is displayed on the screen as
shown below.
»When turning the product on in HDMI input.
»When switching to HDMI input.
Is the input connected to your PC?
Do not show message again YES NO
yIf you select "YES" the size and image quality are optimised
for your PC.
yIf you select "NO" the size and image quality are optimised for
the AV device (DVD player, set-top box).
yIf you select "Do not show message again" this message
does not appear until the TV is reset. You can change the set
value in (Home) Inputs Input Label.
yThe values set for HDMI1/HDMI2 are saved independently.
(Only MT58*)
ENGENGLISH
9
Settings
Automatically Setting Up Programme
(Settings) Programmes Auto Tuning
Automatically tunes the programmes.
yIf Input Source is not connected properly, programme
registration may not work.
yAuto Tuning only finds programmes that are currently
broadcasting.
yIf Lock System is turned on, a pop-up window will appear
asking for password.
To select Picture Mode
(Settings) Picture Picture Mode Settings Picture
Mode
Select the picture mode optimized for the viewing environment or the
programme.
yVivid : Heightens contrast, brightness and sharpness to display
vivid images.
yStandard : Displays images in standard levels of contrast,
brightness and sharpness.
yEco/APS: [Depending on model]
The Energy Saver feature changes settings on the TV to reduce
power consumption.
yCinema/Game : Displays the optimum picture for movie,
game.
ySports : [Depending on model]
Optimizes the video image for high and dynamic actions by
emphasizing primary colours such as white, grass, or sky blue.
y Expert 1,2 : Menu for adjusting picture quality that
allows experts and amateurs to enjoy the best TV viewing.
This is the adjustment menu provided for ISF-certified picture
tuning professionals. (ISF logo can only be used on ISF-certified
TVs.)
ISFccc: Imaging Science Foundation Certified Calibration
Control
yDepending on input signal, available range of picture modes
may differ.
y Expert mode is for picture tuning professionals to
control and fine-tune using a specific image. For normal
images, the effects may not be dramatic.
yThe ISF function is only available on some models.
C
Teletext buttons
( )
These buttons are used for
teletext.
(Home) Accesses the Home menu.
(Settings) Accesses the settings menu.
Accesses the Quick menus.
(Navigation buttons) Scrolls through menus or
options.
Selects menus or options and conrms your input.
Returns to the previous level.
Clears on-screen displays and returns to TV viewing.
D
Views the information of the current programme and
screen.
Not functional.
(Control buttons) Controls media contents.
, , , (Colour buttons) These access special
functions in some menus.
(Gaming mode) Turns the gaming mode on or o.
(Backlight) Adjusts the brightness of the screen by
controlling the screen backlight.
NOTE
yOn MHEG programme, you cannot adjust the backlight with
the yellow or blue key.
hri^Z`^\^_]
C
D
ENG
ENGLISH
10
Fine-tuning Picture Mode
(Settings) Picture Picture Mode Settings
This feature allows you to adjust the selected picture mode in detail.
yBacklight : Controls the level of screen brightness by adjusting
the backlight. The closer to 100, the brighter the screen.
yContrast : Adjusts the contrast of the bright and dark areas of
the picture. The closer to 100, the higher the contrast.
yBrightness : Adjusts the overall screen brightness. The closer
to 100, the brighter the screen.
ySharpness : Adjusts the sharpness of the image. The closer to
50, the sharper and clearer the image.
yColour : Tones down or up the colours displayed on the screen.
The closer to 100, the deeper the colour.
yTint : Adjusts the colour balance between red and green
displayed on the screen. The closer to Red 50, the more red
the colour will be. The closer to Green 50, the more green the
colour will be.
yColour Temperature : Adjusts the colour temperature from
cold to warm.
yDepending on input signal or other picture settings, the range
of detailed items for adjustment may differ.
To set advanced control
(Settings) Picture Picture Mode Settings
Advanced Control / Expert Control
Calibrates the screen for each picture mode; or adjusts picture settings
for a special screen.
yDynamic Contrast : Adjusts the contrast to the optimal level
according to the brightness of the image.
yDynamic Colour : Adjusts colours to make the image appear
in more natural colours.
yPreferred Colour : Adjust the colours of skin, grass and sky to
your personal preferences.
yGamma : Sets the gradation curve according to the output of
picture signal in relation to the input signal.
yColour Gamut : Selects the range of colours that can be
expressed.
yEdge Enhancer : Shows clearer and distinctive yet natural
edges of the video.
yColour Filter : Filters a specific colour spectrum in RGB colours
to fine-tune colour saturation and hue accurately.
yWhite Balance : Adjusts the overall tone of the screen as
desired.
yColour Management System : This is a system that experts
use when they adjust colour with a test pattern. They can
select from six colour areas (Red / Green / Blue / Cyan /
Magenta / Yellow) without affecting other colours. For normal
images, adjustments may not result in noticeable colour
changes.
yDepending on input signal or other picture settings, the range
of detailed items for adjustment may differ.
To set additional picture options
(Settings) Picture Picture Mode Settings
Picture Options
Adjusts detailed setting for images.
yNoise Reduction : Eliminates noise in the picture.
yMPEG Noise Reduction : Eliminates noise generated while
creating digital picture signals.
yBlack Level : Adjusts the brightness and contrast of the
screen to suit the black level of the input picture by using the
blackness (black level) of the screen.
yReal Cinema : Optimizes the screen for movie viewing.
yMotion Eye Care : Automatically adjusts brightness and
reduces image blur based on image data to reduce eyestrain.
yDepending on input signal or other picture settings, the range
of detailed items for adjustment may differ.
ENGENGLISH
11
Resetting picture settings
(Settings) Picture Picture Mode Settings
Picture Reset
Resets picture settings that the user customizes. Each picture mode is
reset. Select the picture mode you wish to reset.
To use Gaming Mode
(Settings) Picture Gaming Mode
[Available only for RGB/HDMI-PC]
This mode allows you to optimize the picture quality for games.
yDAS Mode : [Depending on model]
This mode minimizes the time taken to display the video signal
received from the input device to ensure faster gameplay.
(The screen will flicker when turning DAS Mode On or Off.)
- DAS : Dynamic Action Sync
yBlack Stabilizer :
Objects can be seen more clearly on a dark
screen by adjusting the black levels. Increasing the Black
Stabilizer value brightens the low gray levels on the screen.
(You can easily distinguish objects on a dark game screen.)
Reducing the Black Stabilizer value darkens the low gray
levels and increases the dynamic contrast on the screen.
-You can congure the detailed settings for Gaming Mode using
the key on the remote control.
-You can set DAS Mode only when the frequency for vertical input
is 50 Hz/60 Hz.
-When PIP is turned on, the DAS Mode is unavailable.
(Depending on model)
To use Energy Saving feature
(Settings) Picture
Energy Saving
Reduces power consumption by adjusting screen brightness.
yOff : Turns off the Energy Saving mode.
yMinimum / Medium / Maximum : Applies the pre-set
Energy Saving mode.
yScreen Off : Screen is turned off and only sound is played.
Press any button except Power button on the remote control
to turn the screen back on.
To use Eye Comfort Mode feature
(Settings) Picture Eye Comfort Mode
If you turn this option on, colour temperature will be automatically
adjusted to reduce eye strain.
yOn : Automatically adjusts the screen color temperature.
yOff : Turns off the Eye Comfort Mode.
Select Sound Mode
(Settings) Sound Sound Mode Settings
Sound Mode
Adjusts TV audio to an optimal level based on a selected sound mode.
yStandard : Optimizes the sound for all types of content.
yClear Voice : Boosts voice clarity from the TV.
yMusic : [Depending on model] Optimizes the sound for music.
yCinema : Optimizes the sound for cinemas.
ySports :
[Depending on model] Optimizes the sound for sports.
yGame : Optimizes the sound for gameplay.
Adjusting audio balance
(Settings) Sound Sound Mode Settings
Balance
Adjust the volume of the left and right speakers.
Using the Sound Eect function
(Settings) Sound Sound Mode Settings
The user can select various sound eects.
yVirtual Surround : Enjoy an immersive soundscape with the
virtual multi-channel surround sound effect.
yEqualizer : Set the desired sound by adjusting the equalizer
directly.
yReset : Reset the sound effect settings.
yThis is only available if Sound Mode is set to Standard.
To synchronize audio and video
(Settings) Sound AV Sync Adjustment
[Depending on model]
Synchronizes video and audio directly when they do not match. If you
set AV Sync Adjustment to On, you can adjust the sound output (TV
speakers) to the screen image.
yIf you select the Bypass, Outputs the broadcast signals or
the sound from external devices without any audio delay. The
audio may be output before the video because of the time the
TV takes to process the video input.
ENG
ENGLISH
12
PIP Setting
(Settings) General PIP
[Depending on model]
yMode : Shows or hides the sub-screen.
ySub Input : Select the input on the sub-screen.
yPosition : Adjusts the position of the sub-screen.
ySize : Adjusts the size of the sub-screen.
ySound : Switches to the main screen sound or the sub screen
sound.
yThe PIP function is only available in the following mode:
- Main : RGB-PC Sub : DTV / ATV / HDMI
- Main : HDMI Sub : DTV / ATV / Component
yThe PIP settings can also be set using Q.MENU.
yPress the PIP button on the remote control to show or hide the
sub-screen.
yThe PIP function is not available when SIMPLINK is activated.
Setting USB AutoRun
(Settings) General USB AutoRun
Play photos or videos of USB automatically when TV is turned on or
USB is connected.
yOff : Turn off the USB AutoRun.
yVideos : Play videos of USB automatically.
yPhotos : Play photos of USB automatically.
yOnly plays the files in the top level folder of the USB device in
sequence.
yWhile playing, press the BACK or EXIT button on the remote
control to end this function.
yIf the files are invalid or corrupted, the following message
appears before returning to the previous input status: "This file
is invalid."
yWhen the USB device is reconnected after being disconnected
during video playback, Continue watching starts automatically
and resumes the video from the last viewed scene (only applies
to the first video).
To use SIMPLINK
[Depending on model]
SIMPLINK is a feature that enables you to control and manage various
multimedia devices conveniently via the SIMPLINK menu.
1 Connect the TV’s HDMI IN terminal and the SIMPLINK device’s HDMI
output terminal using an HDMI cable.
2 Select (Settings) General SIMPLINK.
SIMPLINK menu window appears.
3 In SIMPLINK Setting window, set SIMPLINK function to On.
4 Congure the Auto Power Sync settings to On or O.
5 In SIMPLINK menu window, selects the device you want to control.
yYou can also set the SIMPLINK in (Home) Inputs
SIMPLINK.
yThis function is only compatible with devices with the
SIMPLINK logo.
yTo use the SIMPLINK function, you need to use a high-
speed HDMI® cable (with CEC (Consumer Electronics Control)
feature added). High-speed HDMI® cables have the No. 13 pin
connected for information exchange between devices.
yIf you switch to another input, the SIMPLINK device will stop.
yIf a third-party device with the HDMI-CEC function is also used,
the SIMPLINK device may not work normally.
yIf you select or play media from a the device with a home
theatre function, the HT Speaker(Speaker) is automatically
connected.
SIMPLINK function description
yDirect Play : Plays the multimedia device on the TV instantly.
yControlling devices with the TV remote control :
Manages the multimedia device with the TV remote control.
yMain Power O : If Auto Power Sync is set to On in the
SIMPLINK settings and turn o your TV, the devices connected
to your TV via SIMPLINK will also be turned o.
yMain Power On : If Auto Power Sync is set to On in the
SIMPLINK settings, turning on a SIMPLINK-linked device will
turn the TV on. (Behavior may vary depending on connected
device.)
To set password
(Settings) Safety Set Password
Sets or changes the TV password.
yThe initial password is set to ‘0000’.
yWhen France is selected for Country, password is not ‘0000’ but
‘1234’.
yWhen France is selected for Country, password cannot be set to
‘0000’.
ENGENGLISH
13
To specify Factory Reset
(Settings) General Reset to Initial Settings
All stored information is deleted and TV settings are reset.
The TV turns itself o and back on, and all settings are reset.
yWhen Lock System is in place, a pop-up window appears and
asks for password.
yDo not turn off the power during initialization.
To remove the USB device
Select the connected USB HDD from (Home) Inputs and
select the Eject button to disconnect the USB HDD storage device.
When you see a message that the USB device has been removed,
separate the device from the TV.
yOnce a USB device has been selected for removal, it can no
longer be read. Remove the USB storage device and then re-
connect it.
Using a USB storage device - warning
yIf the USB storage device has a built-in auto recognition
program or uses its own driver, it may not work.
ySome USB storage devices may not work or may work
incorrectly.
yUse only USB storage devices formatted with the Windows
FAT32 or NTFS File System.
yFor external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 500 mA.
yIt is recommended that you use USB memory sticks of 32 GB or
less and USB HDDs of 2 TB or less.
yIf a USB HDD with power-saving function does not work
properly, turn the power o and on. For more information,
refer to the user manual of the USB HDD.
yData in the USB storage device can be damaged, so be sure to
back up important les to other devices. Data maintenance
is the user’s responsibility and the manufacturer is not
responsible for data loss.
My Media supporting le
yMaximum data transfer rate : 20 Mbps (Mega bit per second)
yExternal supported subtitle formats : *.srt (SubRip), *.smi
(SAMI), *.sub (SubViewer, MicroDVD, DVDsubtitleSystem,
SubIdx(Vobsub)), *.ass/*.ssa (SubStation Alpha), *.txt
(TMplayer), *.psb (PowerDivX)
yInternal supported subtitle formats: *.dat/*.mpg/*.mpeg/
*.vob (DVD Subtitle), *.ts/*.tp/*.m2ts (DVB Subtitle),
*.mp4 (DVD Subtitle, UTF-8 Plain Text),
*.mkv (ASS, SSA, UTF-8 Plain Text, Universal Subtitle Format,
VobSub, DVD Subtitle), *.divx/*.avi (XSUB1, XSUB+)
1 XSUB : Supports internal subtitles generated from DivX6
Supported Video Formats
yMaximum : 1920 x 1080 @ 30p (Only Motion JPEG 640 x 480 @
30p)
y.asf, .wmv
[Video] MPEG-4 Part2, XViD, H.264/AVC, VC1(WMV3, WVC1),
MP43
[Audio] WMA Standard, WMA9(Pro), MP3, AAC, AC3
y.divx, .avi
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XViD, H.264/AVC
[Audio] HE-AAC, LPCM, ADPCM, MPEG- 1 Layer I,
MPEG-1 Layer II, Dolby Digital, MPEG-1 Layer III (MP3)
y.ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, H.265/HEVC
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, MPEG-1 Layer III
(MP3), Dolby Digital, Dolby Digital Plus, AAC, HE-AAC
y.vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I, MPEG- 1 Layer II,
DVD-LPCM
y.mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, XViD,
H.264/AVC
[Audio] AAC, MPEG-1 Layer III (MP3)
y.mkv
[Video] MPEG-2, MPEG-4 Part2, XViD, H.264/AVC
[Audio] HE-AAC, Dolby Digital, MPEG-1 Layer III (MP3), LPCM
ymotion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM
y.mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, Dolby Digital, LPCM
y.dat
[Video] MPEG-1, MPEG-2
[Audio] MP2
y.flv
[Video] Sorenson H.263, H.264/AVC
[Audio] MP3, AAC, HE-AAC
y.3gp, .3gp2
[Video] H.264/AVC, MPEG-4 Part2
[Audio] AAC, AMR(NB/WB)
ENG
ENGLISH
14
Supported Audio Formats
yFile type : mp3
[Bit rate] 32 Kbps ~ 320 Kbps
[Sample freq.] 16 kHz ~ 48 kHz
[Support] MPEG1, MPEG2, Layer2, Layer3
yFile Type : AAC
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] ADIF, ADTS
yFile Type : M4A
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] MPEG-4
yFile Type : WMA
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] WMA7, WMA8, WMA9 Standard
yFile Type : WMA10 Pro
[Bit rate] ~ 768 Kbps
[Channel / Sample freq.]
M0 : up to 2 Channel @ 48 kHz
(Except LBR mode),
M1 : up to 5.1 Channel @ 48 kHz,
M2 : up to 5.1 Channel @ 96 kHz
[Support] WMA10 Pro
yFile Type : OGG
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] OGG Vorbis
yFile Type : WAV
[Bit rate] 64 kbps ~ 1.5 Mbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] LPCM
[Bitdepth] 8 bit / 16 bit / 24 bit
Supported Photo Formats
yCategory : 2D (jpeg, jpg, jpe)
[Available file type]
SOF0: Baseline,
SOF1 : Extend Sequential,
SOF2 : Progressive
[Photo size]
Minimum : 64 x 64,
Maximum (Normal Type) : 15360 x 8640,
Maximum (Progressive Type) : 1920 x 1440
yCategory : BMP
[Photo size] Minimum : 64 x 64, Maximum : 9600 x 6400
yCategory : PNG
[Available file type] Interlace, Non-Interlace
[Photo size]
Minimum : 64 x 64,
Maximum (Interlace) : 1200 x 800,
Maximum (Non-Interlace) : 9600 x 6400
yBMP and PNG format files may be slower to display than JPEG.
To see web manual
To obtain detailed User Guide information, please visit www.lg.com.
ENGENGLISH
15
Maintenance
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend
the product lifespan.
yMake sure to turn the power off and disconnect the power cord
and all other cables first.
yWhen the TV is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent
possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in
clean water or a diluted mild detergent. Then wipe immediately with
a dry cloth.
yAvoid touching the screen at all times, as this may result in
damage to the screen.
yDo not push, rub, or hit the screen surface with your fingernail
or a sharp object, as this may result in scratches and image
distortions.
yDo not use any chemicals as this may damage the product.
yDo not spray liquid onto the surface. If water enters the TV, it
may result in fire, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
Preventing “Image burn” or “Burn-in” on
your TV screen
yIf a fixed image displays on the TV screen for a long period
of time, it will be imprinted and become a permanent
disfigurement on the screen. This is “image burn” or “burn-in”
and not covered by the warranty.
yIf the aspect ratio of the TV is set to 4:3 for a long period of
time, image burn may occur on the letterboxed area of the
screen.
yAvoid displaying a fixed image on the TV screen for a long
period of time (2 or more hours for LCD) to prevent image
burn.
Troubleshooting
Cannot control the TV with the remote control.
yCheck the remote control sensor on the product and try again.
yCheck if there is any obstacle between the product and the
remote control.
yCheck if the batteries are still working and properly installed
( to , to ).
No image display and no sound is produced.
yCheck if the product is turned on.
yCheck if the power cord is connected to a wall outlet.
yCheck if there is a problem in the wall outlet by connecting
other products.
The TV turns o suddenly.
yCheck the power control settings. The power supply may be
interrupted.
yCheck if the Auto Power Off (Depending on model) /
Sleep Timer / Timer Power Off feature is activated in the
Timers settings.
yIf there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI/RGB), 'No Signal', 'Check signal
cable' or ‘Unsupported Format’ is displayed.
yTurn the TV off/on using the remote control.
yReconnect the HDMI/RGB cable.
yRestart the PC with the TV on.
If TV is turned o automatically.
yIf Timer Power On is enabled, the TV will be turned on at the
specified time. If you do not operate the TV for two hours, the
TV will be turned off automatically.
yTo disable this function, use your remote control to go to
(Settings) Timers Timer Power On
2 Hours Auto Power Off Off.
ENG
ENGLISH
16
Specications
Product specications may be changed without prior notice due to upgrade of product functions.
Models
Dimensions (W x H x D) (mm) Weight (kg) Power
consumption
(Outgoing
condition)
Power
requirement
With stand Without stand With stand Without stand
20MT48DF
20MT48VF 467.0 x 330.5 x 146.3 467.0 x 278.0 x 52.7 2.4 2.2 22 W 19 V 1.2 A
22MT58DF
22MT58VF 507.6 x 410.5 x 198.2 507.6 x 316.5 x 75.5 3.1 2.8 26 W 19 V 1.6 A
24MT58DF
24MT58VF 554.9 x 422.9 x 203.5 554.9 x 342.3 x 92.8 3.6 3.2 28 W 19 V 2.0 A
27MT58DF
27MT58VF 642.0 x 473.7 x 203.5 642.0 x 393.5 x 93.0 5.0 4.6 32 W 19 V 2.0 A
22MT48DF
22MT48VF 507.6 x 358.0 x 146.3 507.6 x 316.5 x 52.7 3.0 2.9 26 W 19 V 1.6 A
22MT41DF
22MT41DW 507.6 x 364.6 x 143.4 507.6 x 316.5 x 52.7 3.1 2.9 26 W 19 V 1.6 A
24MT48DF
24MT48VF
24MT48U
24MT48DW
24MT48DG
24MT48VW
556 x 387.3 x 146.3 556 x 345.2 x 53.1 3.4 3.2 28 W 19 V 1.6 A
24MT41DF
24MT41DW 556 x 392.7 x 143.4 556 x 345.2 x 53.1 3.5 3.2 28 W 19 V 1.6 A
28MT48DF 641.5 x 435.5 x 186.1 641.5 x 396.3 x 57.5 4.7 4.5 28 W 19 V 1.6 A
28MT41DF
28MT41DW 641.5 x 444.0 x 178.8 641.5 x 396.3 x 57.5 5.0 4.5 28 W 19 V 1.6 A
28MT48VF
28MT48U
28MT48VW
641.5 x 435.5 x 186.1 641.5 x 396.3 x 57.5 4.7 4.5 33 W 19 V 2.0 A
28MT48DT 641.5 x 428.7 x 159.2 641.5 x 396.3 x 57.5 4.6 4.5 28 W 19 V 1.6 A
29MT48DF
29MT48VF 665.8 x 444.5 x 186.1 665.8 x 405.5 x 61.4 4.8 4.6 33 W 19 V 2.0 A
29MT48T 665.8 x 435 x 175 665.8 x 405.5 x 61.4 4.7 4.5 33 W 19 V 2.0 A
AC/DC Adapter
20MT48* 24MT58* / 27MT58* / 29MT48*
/ 28MT48V*/ 28MT48U
22MT58* / 22MT48* / 22MT41* /
24MT48* / 24MT41* / 28MT41* /
28MT48D*
Manufacturer : Lien Chang
Model : LCAP26-E, LCAP21
Manufacturer : Honor
Model : ADS-40FSG-19 19025GPG-1,
ADS-40SG-19-3 19025G
Manufacturer : Lien Chang
Model : LCAP16B-E, LCAP21C
Manufacturer : Honor
Model : ADS-45FSN-19 19040GPG,
ADS-45SN-19-3 19040G
Manufacturer : Lien Chang
Model : LCAP16A-E, LCAP21A
Manufacturer : Honor
Model : ADS-40FSG-19 19032GPG,
ADS-40SG-19-3 19032G
In : AC 100 – 240 V ~ 50/60 Hz
Out : DC 19 V 1.3 A
In : AC 100 – 240 V ~ 50/60 Hz
Out : DC 19 V 2.1 A
In : AC 100 – 240 V ~ 50/60 Hz
Out : DC 19 V 1.7 A
ENGENGLISH
17
CI module Size (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm
Environment
condition
Operating Temperature 0 °C to 40 °C
Operating Humidity Less than 80 %
Storage Temperature -20 °C to 60 °C
Storage Humidity Less than 85 %
(Depending on country)
Digital TV Analogue TV
Satellite Terrestrial Cable Terrestrial / Cable
Television system DVB-S/S2* DVB-T
DVB-T2* DVB-C PAL/SECAM B/G, D/K, I,
SECAM L
Channel coverage
(Band) 950 ~ 2150 Mhz
VHF III : 174 ~ 230 Mhz
UHF IV : 470 ~ 606 Mhz
UHF V : 606 ~ 862 Mhz
S Band II : 230 ~ 300 Mhz
S Band III : 300 ~ 470 Mhz
46 ~ 862 Mhz 46 ~ 862 Mhz
Maximum number of
storable programmes 6000 2000
External antenna impedance 75 Ω
* Only DVB-T2/C/S2 support models.
ENG
ENGLISH
18
RGB (PC) / HDMI (PC) supported mode
(Only MT58*)
Resolution Horizontal
frequency(kHz)
Vertical
frequency(Hz)
720 x 400 31.468 70.080
640 x 480 31.469
37.500
59.940
75.000
800 x 600 37.879
46.875
60.317
75.000
1024 x 768 48.363 60.004
1024 x 768
(Only HDMI (PC)) 56.476 70.069
1024 x 768 60.023 75.029
1152 x 864 67.500 75.000
1280 x 720 45.000 60.000
1280 x 800 49.702 59.810
1280 x 1024 63.981
79.976
60.020
75.025
1400 x 1050 65.317 59.978
1440 x 900 55.935 59.887
1600 x 900 60.000 60.000
1680 x 1050 64.674
65.290
59.883
59.954
1920 x 1080
(Only RGB (PC)) 66.590 59.930
1920 x 1080
(Only HDMI (PC)) 67.500 60.000
NOTE
yThe optimal display resolution is 1920 x 1080 @ 60 Hz.
yThe optimal timing in each mode is vertical frequency 60 Hz.
HDMI (PC) supported mode
(Only 22MT48*, 22MT41*)
Resolution Horizontal
frequency(kHz)
Vertical
frequency(Hz)
720 x 400 31.468 70.080
640 x 480 31.469
37.500
59.940
75.000
800 x 600 37.879
46.875
60.317
75.000
1024 x 768
48.363
56.476
60.023
60.004
70.069
75.029
1152 x 864 67.500 75.000
1280 x 720 45.000 60.000
1280 x 800 49.702 59.810
1280 x 1024 63.981
79.976
60.020
75.025
1400 x 1050 65.317 59.978
1440 x 900 55.935 59.887
1600 x 900 60.000 60.000
1680 x 1050 64.674
65.290
59.883
59.954
1920 x 1080 67.500 60.000
(Only 20/24/28/29MT48*, 24/28MT41*)
Resolution Horizontal
frequency(kHz)
Vertical
frequency(Hz)
720 x 400 31.468 70.080
640 x 480 31.469
37.500
59.940
75.000
800 x 600 37.879
46.875
60.317
75.000
1024 x 768 48.363
60.023
60.004
75.029
1280 x 800 49.702 59.810
1366 x 768 47.717 59.790
NOTE
yThe optimal display resolution
- 22MT48*, 22MT41*: 1920 x 1080 @ 60 Hz.
- 20/24/28/29MT48*, 24/28MT41*: 1366 x 768 @ 60 Hz.
yThe optimal timing in each mode is vertical frequency 60 Hz.
ENGENGLISH
19
HDMI (DTV) supported mode
Resolution Horizontal
frequency(kHz)
Vertical
frequency(Hz)
720 x 480 31.469
31.500
59.940
60.000
720 x 576 31.250 50.000
1280 x 720
37.500
44.960
45.000
50.000
59.940
60.000
1920 x 1080
33.720
33.750
28.125
27.000
33.750
56.250
67.430
67.500
59.940
60.000
50.000
24.000
30.000
50.000
59.940
60.000
Component supported mode
(Only MT58*)
Resolution Horizontal
frequency(kHz)
Vertical
frequency(Hz)
720 x 480
15.730
15.750
31.470
31.500
59.940
60.000
59.940
60.000
720 x 576 15.625
31.250
50.000
50.000
1280 x 720
44.960
45.000
37.500
59.940
60.000
50.000
1920 x 1080
33.720
33.750
28.125
56.250
67.432
67.500
59.940
60.000
50.000
50.000
59.940
60.000
NOTE
yThe optimal display resolution
- MT58*, 22MT48*, 22MT41*: 1920 x 1080 @ 60 Hz.
- 20/24/28/29MT48*, 24/28MT41*: 1366 x 768 @ 60 Hz.
yThe optimal timing in each mode is vertical frequency 60 Hz.
Component port connecting information
(Only MT58*)
Component ports on the TV Y PBPR
Video output ports
on DVD player
Y PBPR
YB-Y R-Y
YCb Cr
Y Pb Pr
ENG
ENGLISH
20
WARNING!
Never place a television set in an unstable location. A television set
may fall, causing serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking simple precautions
such as:
yUsing cabinets or stands recommended by the manufacturer
of the television set.
yOnly using furniture that can safely support the television set.
yEnsuring the television set is not overhanging the edge of the
supporting furniture.
yNot placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture
and the television set to a suitable support.
yNot placing the television set on cloth or other materials that
may be located between the television set and supporting
furniture.
yEducating children about the dangers of climbing on furniture
to reach the television set or its controls.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
Make sure to read the Safety Precautions
before using the product.
Keep the Owner’s Manual (CD) in an
accessible place for future reference.
Please note that the label attached to the
product provides information for technical
support.
MODEL
SERIAL