Table of Contents
LG 32WFC User Manual
Displayed below is the user manual for 32WFC by LG which is a product in the Signage Displays category. This manual has pages.
Related Manuals
ENGLISH
2
TABLE OF CONTENTS
SAFETY PRECAUTION ..................3
- Precautions In Installing the Product ..................... 3
- Precautions to the AC Adapter and Electrical
Power ......................................................................................5
- Precautions In Moving the Product ........................7
- Precautions In Using the Product ............................7
ASSEMBLY AND PREPARATION ..9
- Mounting Holes ..............................................................10
- Portrait Layout ................................................................ 11
- Storage Method for Panel Protection ................12
Correct Method
Incorrect Method
PRODUCT INSTALLATION ......... 14
- Installing an LVDS Cable.............................................14
- Lighting Installation ...................................................... 15
- Installation in Enclosure .............................................16
- Precaution ..........................................................................18
Correct Method
Incorrect Method
TROUBLESHOOTING .................. 20
PRODUCT SPECIFICATIONS ...... 21
LVDS PIN MAP GUIDE ................ 23
ENGLISH
3
WARNING - This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
SAFETY PRECAUTION
Please read these safety precautions carefully before using the product.
WARNING
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or the product may be damaged.
Precautions In Installing the Product
WARNING
• Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction, or deformation may occur.
• Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
• Do not put heavy objects on the product or sit upon it.
- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
• Do not leave the power or signal cable unattended on the pathway.
- The passerby can trip or fall, which can cause electrical shock, fire, product breakdown, or injury.
• Install the product in a neat and dry place.
- Dust or moisture can cause electrical shock, fire or product damage.
• If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
• If you dropped the product or the case is broken, turn off the product and unplug the power cord.
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.
• Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.
- It can cause injury to human, problem to product and damage the display.
ENGLISH
4
• Do not let the product fall or drop when connecting it with an external device.
- This may cause injury and/or damage to the product.
• When connecting it to a game device, keep a distance of four times the diagonal measurement of the screen from the
device.
- If the product falls because of the short cable, this may cause injury and/or damage to the product.
• Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. To use
the product for a long period of time, use a screen saver on the PC or utilize the residual image prevention function
on the product, and when the product is not used, turn off the power. Burn-in and related problems are not covered
by the warranty on this product.
CAUTION
• Make sure the product ventilation holes are not blocked. Install the product in a suitably wide place.
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
• Install the product on a flat and stable place that has no risk of dropping the product.
- If the product is dropped, you may be injured or the product may be broken.
• Install the product where no EMI occurs.
• Keep the product away from direct sunlight.
- The product can be damaged.
• If you install the product in a place that does not meet the recommended conditions, this may cause serious damage
to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before
installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are
used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a
long period of time (airport and train station), failure to do so will invalidate the warranty.
• Do not install the product in an area with poor ventilation (e.g.on a bookshelf, in a closet) or outside and avoid placing
on cushions or carpets.
• In addition, do not install it where there are heating objects such as lighting equipment.
ENGLISH
5
Precautions to the AC Adapter and Electrical Power
WARNING
• If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect the
power cord immediately and contact the service center.
- Otherwise, this may cause a fire or electric shock due to damage to the product.
• Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and dry
them before use.
- Otherwise, this may cause a fire or electric shock.
• Make sure to completely insert the power cord into the AC adapter.
- If loosely connected, the poor connection may cause a fire or electric shock.
• Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc.
- The use of non-approved products may cause a fire or electric shock.
• When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive force.
- The power line can be damaged, which may cause electric shock or fire.
• Be careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC adapter.
Be careful not to damage the power cord or AC adapter with sharp objects.
- Damaged power cords may cause a fire or electric shock.
• Never disassemble, repair or modify the power cord or AC adapter.
- This may cause a fire or electric shock.
• Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
• Use the rated voltage only.
- The product can be damaged, or you may be electrocuted.
• In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very
dangerous.
- It can cause electric shock.
• Do not connect several extension cords, electrical appliances, or electrical heaters to a single outlet. Use a power strip
with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating.
ENGLISH
6
• Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power
plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
• If you don’t intend to use the product for a long time, unplug the power cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
• Fix the power cable completely.
- If the power cable is not fixed completely, a fire can break out.
• Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected
to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input
terminal.
- You may be electrocuted.
• The appliance coupler is used as the disconnect device.
• Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily
accessible.
• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the
unit is turned off.
CAUTION
• Be sure to keep the outlet, AC adapter, and pins of the power plug clean from dust and etc.
- This may cause a fire.
• Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.
• Use only the power cord supplied with the unit. If you use another power cord, make sure that it is certified by the
applicable national standards when not provided by the supplier. If the power cable is faulty in any way, please contact
the manufacturer or the nearest authorized repair service provider for a replacement.
ENGLISH
7
Precautions In Moving the Product
WARNING
• Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
• Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
• Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged
product can cause electric shock or fire. Contact an authorized the service center for repair.
• Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to
carry larger apparatus. Do not press against or put stress on the front panel of the apparatus.
CAUTION
• Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
• Do not dispose the product-packing box. Use it when you move.
Precautions In Using the Product
WARNING
• Do not disassemble, repair or modify the product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or repair.
• When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.
• Keep the product away from water.
- Fire or electric shock accident can occur.
• Do not shock or scratch the front and sides of the screen with metallic objects.
- Otherwise, it may cause damage to the screen.
• Avoid high temperatures and humidity.
ENGLISH
8
CAUTION
• Do not put or store inflammable substances near the product.
- There is a danger of explosion or fire due to careless handling of the inflammable substances.
• When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not
clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not
use chemicals such as benzene, paint thinners, or alcohol.)
• Take a rest from time to time to protect your vision.
• Keep the product clean at all times.
• Take a comfortable and natural position when working with a product to relax the muscles.
• Take a regular break when working with a product for a long time.
• Do not press strongly upon the panel with a hand or sharp object such as nail, pencil, or pen, or make a scratch on it.
• Keep the proper distance from the product.
- Your vision may be impaired if you look at the product too closely.
• Set the appropriate resolution and clock by referring to the User’s Guide.
• Use authorized detergent only when cleaning the product. (Do not use benzene, thinner, or alcohol.)
- Product can be deformed.
• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over
the apparatus (e.g. on shelves above the unit).
• Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight, open fireplace, and
electric heaters.
• Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much
moisture may cause staining.
WATER CHEMICALS
• Do not use products using high voltage around the Monitor. (e.g., a bug zapper)
- Monitor may have malfunction as its electrical shock.
ENGLISH
9
ASSEMBLY AND PREPARATION
CAUTION
• Always use genuine components to ensure safety and product performance.
• The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
• The accessories provided with your product may vary depending on the model or region.
• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
functions.
• LVDS cable is optional and not provided with the product. Please refer to LVDS Pin Map Guide on pages 23 to 24 for
the LVDS cable assembly.
• Do not use any unauthorized parts or accessories to ensure the safety and product life span.
• The warranty will not cover any damage caused by using the product in an excessively dusty environment.
ENGLISH
10
Mounting Holes
Use M3 screws to mount the monitor. The holes for the screws are on the rear of the product.
< Front of the product >
< Rear of the product >
CAUTION
• This product has the front and back sides. Make sure the product is installed with the front side facing forward.
• The image is reversed on the back.
ENGLISH
11
Portrait Layout
To install in portrait mode, rotate the set clockwise 90 degrees when looking at from the front.
The portrait mode is only available on the scaler board. (The scaler board should support portrait mode.)
CAUTION
• You can make a scaler board or purchase AD Box (TSP500-A, TSP300).
• The scaler board is optional and it is not part of the product.
ENGLISH
12
Storage Method for Panel Protection
Correct Method
Cushion
Panel
When laying the product on a flat floor, pit it face down on a cushion or blanket to prevent scratching and damage.
Panel
If there is no a cushion or a soft cloth available, ensure the floor is clean. Then lay the product down carefully with the
panel facing either upward or downward. At this time, make sure that no object falls on the panel.
ENGLISH
13
Incorrect Method
Panel
If the product is tilted onto the bezel, the bottom of the panel may be damaged.
Panel
If the product is tilted onto the edge of the panel, the panel may be damaged.
ENGLISH
14
PRODUCT INSTALLATION
Installing an LVDS Cable
The LVDS cable port is located as shown in the figure below.
When installing the product, make sure there is enough space to install the LVDS cable.
45 mm
30 mm
LVDS Cable (Not included)
NOTE
• LVDS cable is optional and not provided with the product.
ENGLISH
15
Lighting Installation
This product must be installed with backlighting.
Lighting must be installed behind the product so that the display can be seen clearly.
Lighting
600 lux or more
(When the Full Screen is
White.)
If something obstructs the backlighting, additional lighting may be required.
Lighting
Additional lighting
Additional lighting
Object
600 lux or more
(When the Full Screen is
White.)
ENGLISH
16
Installation in Enclosure
Install the product in the enclosure. Wear work gloves when installing the product. Do not use bare hands. Otherwise, it
may cause personal injury.
1 Place the product in the enclosure.
2 Attach the product using the prepared screw holes and an additional enclosure guide frame.
NOTE
• This product can be installed in locations other than within the enclosure.
CAUTION
• The panel of this product is so thin that it can be easily broken when it is exposed to the outside. Use a clear
protective cover to keep the product from exposure to the elements.
• When installing the product in its housing, make sure that the framework of the product is grounded. (This helps
prevent the product being damaged in the event of thunder and lightning.)
ENGLISH
17
<Example of the product in the enclosure>
<Example of the lighting installation>
Lighting must be installed in the enclosure.
ENGLISH
18
Precaution
Correct Method
Do not hold the screen area when holding the product.
Use a soft cloth moistened with n-hexane to remove dust or stains on the screen.
CAUTION
• If a fixed image displays on the screen for a long period of time, it will be imprinted and become a permanent
disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.
• To prevent image sticking, do not play a still image for more than two hours.
• Recommended operation time for optimum performance and reliability is 12 hours or less per day.
ENGLISH
19
Incorrect Method
Do not lift up the product by holding a corner.
CAUTION
• Make sure the power is disconnected before moving or installing the product. Otherwise electric shock may occur.
• Wear working gloves when installing the product. Do not use bare hands. Otherwise, it may cause personal injury.
• If you install the product on a ceiling or slanted wall, it may fall and result in severe injury.
• Do not fasten the screws too tightly; this may cause damage to the product and void your warranty.
• Use M3 x L4 screws to mount the monitor. Any damages or injuries caused by misuse or use of improper accessories
are not covered by the warranty.
ENGLISH
20
TROUBLESHOOTING
After-image appears on the product.
Problem Action
After-image appears when the product is
turned off.
• If you use a fixed image for a long time, the pixels may be damaged.
Use the screen-saver function.
• When a dark image is displayed on the screen after an image with high
contrast (black and white or gray), this may cause image sticking. This
is normal for LCD screen products.
Screen color is abnormal.
Problem Action
Screen color is unstable or mono-colored. • Check the connection status of the LVDS cable.
• Check whether the LVDS cable is connected correctly following the
LVDS Pin Map Guide.
Do black spots appear on the screen? • Several pixels (red, green, blue, white, or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. This is not a malfunction of the LCD.
ENGLISH
21
PRODUCT SPECIFICATIONS
The product specifications below may be changed without prior notice due to upgrade of product functions.
Active Screen Size 80 cm diagonal
Dimensions (Width x Height x Depth) /
Weight 743.2 mm x 504.2 mm x 11.2 mm / 2.7 kg
Pixel Pitch 0.36375 mm x 0.36375 mm
Pixel Format 1920 horiz. by 1080 vert. Pixels, RGBW stripe arrangement
Color Depth 8 bit, 16.7 Million colors
Transmittance (White) 8.63 % (center 1point, (Typ.))
Viewing Angle (CR>10) Viewing angle free
Power Consumption On Mode: 12 W
Display Mode Transmissive mode, Normally black
Surface Treatment Hard coating (2 H), Anti-glare treatment of the front polarizer
(Reflectance < 2 %)
Possible Display Type Landscape and Portrait Enabled
Environmental
Conditions
Operating Temperature 0 °C to 40 °C
Operating Humidity 10 % to 80 %
Storage Temperature -20 °C to 60 °C
Storage Humidity 5 % to 85 %
ENGLISH
22
(Unit : mm)
51.6 110
743.2
110 51.6
46.612512546.6
65.1
65.1
75
75
75
75
504.2
129.1
129.1
16-Mounting Ready Hole (M3 Tap)
ENGLISH
23
LVDS PIN MAP GUIDE
• LCD Connector (CN1) : FI-RE51S-HF or Equivalent, refer to below table.
• Mating Connector : FI-RE51HL
• Cable length: 1 m of coaxial cable or less
Pin No. Symbol Description Note
1 NC or GND No Connection or Ground
2 NC No Connection 4
3 NC No Connection 4
4 NC No Connection 4
5 NC No Connection 4
6 NC No Connection 4
7 LVDS Select 'H' = JEIDA, 'L' = VESA
8 NC No Connection
9 NC No Connection
10 NC No Connection
11 GND Ground 1
12 R1AN FIRST LVDS Receiver Signal(A-)
13 R1AP FIRST LVDS Receiver Signal(A+)
14 R1BN FIRST LVDS Receiver Signal(B-)
15 R1BP FIRST LVDS Receiver Signal(B+)
16 R1CN FIRST LVDS Receiver Signal(C-)
17 R1CP FIRST LVDS Receiver Signal(C+)
18 GND Ground 1
19 R1CLKN FIRST LVDS Receiver Clock Signal(-)
20 R1CLKP FIRST LVDS Receiver Clock Signal(+)
21 GND Ground 1
22 R1DN FIRST LVDS Receiver Signal(D-)
23 R1DP FIRST LVDS Receiver Signal(D+)
24 NC No Connection 4
25 NC No Connection 4
26 NC or GND No Connection or Ground
27 NC No Connection 4
28 R2AN SECOND LVDS Receiver Signal(A-)
29 R2AP SECOND LVDS Receiver Signal(A+)
30 R2BN SECOND LVDS Receiver Signal(B-)
31 R2BP SECOND LVDS Receiver Signal(B+)
32 R2CN SECOND LVDS Receiver Signal(C-)
33 R2CP SECOND LVDS Receiver Signal(C+)
34 GND Ground 1
35 R2CLKN SECOND LVDS Receiver Clock Signal(-)
36 R2CLKP SECOND LVDS Receiver Clock Signal(+)
37 GND Ground 1
ENGLISH
24
Pin No. Symbol Description Note
38 R2DN SECOND LVDS Receiver Signal(D-)
39 R2DP SECOND LVDS Receiver Signal(D+)
40 NC No Connection 4
41 NC No Connection 4
42 NC or GND No Connection or Ground
43 NC or GND No Connection or Ground
44 GND Ground 5
45 GND Ground
46 GND Ground
47 NC No Connection
48 VLCD Power Supply+12.0V 2
49 VLCD Power Supply+12.0V 2
50 VLCD Power Supply+12.0V 2
51 VLCD Power Supply+12.0V 2
NOTE
1 All GND (ground) pins should be connected together to the LCD module’s metal frame.
2 All VLCD (power input) pins should be connected together.
3 All Input levels of LVDS signals are based on the EIA 644 Standard.
4 #1~#6 & #8~#10 NC (No Connection) These pins are used only for LGD (Do not connect)
5 Specific pin No. #44 is used for No signal detection of system signal interface. It should be GND for NSB (No
Signal Black) during the system interface signal is not. If this pin is H, LCD Module displays AGP (Auto Generation
Pattern).
Temporary noise is normal when powering ON or OFF this
device.
Make sure to read the Safety Precautions before using the
product.
The model and serial numbers of the SET are located on the
back and one side of the SET. Record it below should you ever
need service.
MODEL
SERIAL