Table of Contents
LG 38CB99-W User Manual
Displayed below is the user manual for 38CB99-W by LG which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
* LG LED Monitor applies LCD screen with LED
backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
38UC99
38CB99
OWNER’S MANUAL
IPS LED Monitor
(LED Monitor*)
2
ENGLISH
TABLE OF CONTENTS
LICENSE .......................................3
ASSEMBLING AND PREPARING 4
- Product Composition ..................................................4
- Supported Drivers and Software .........................5
- Product and Button Description...........................6
How to Use the Joystick Button
Input Connector
- Moving and Lifting the Monitor............................8
- Installing the Monitor ............................................10
Assembling the Stand
Installing on a Table
Adjusting the Stand Height
Adjusting the Angle
Tidying up Cables
Using the Kensington Lock
Detaching the Stand Body
Installing the Wall Mount Plate
Installing on the Wall
USING THE MONITOR .............. 20
- Connecting to a PC...................................................20
HDMI Connection
DisplayPort Connection
USB-C connection
- Connecting AV Devices ...........................................23
HDMI Connection
- Connecting Peripherals...........................................23
USB Cable connection
Connecting Headphones
- Service only port ........................................................ 25
USER SETTINGS ....................... 26
- Activating the Main Menu ....................................26
Main Menu Features
- User Settings ...............................................................28
Menu Settings
Quick Settings
Input
Picture
Sound
General
TROUBLESHOOTING ................ 47
PRODUCT SPECIFICATION ...... 50
- Factory Support Mode............................................52
- HDMI Timing (Video) ................................................53
- Power LED ..................................................................... 53
- Wireless module (WB1NP6) Specifications .....
............................................................................................. 53
3
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for dual-mode source devices are all registered
trademarks of the Video Electronics Standards Association.
The SuperSpeed USB Trident logo is a registered trademark of USB Implementers Forum, Inc.
The
Bluetooth
® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.
4
ENGLISH
ASSEMBLING AND PREPARING
Product Composition
Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the
product. Note that the product and related components may look different from those shown here.
CD (Owner’s Manual / Software /
Guides) / Cards Power Cord AC/DC Adapter HDMI Cable DisplayPort Cable
Stand Base Cable Holder Stand Body USB C-C Cable USB C-A Gender
5
ENGLISH
CAUTION
• Always use genuine LG components to ensure safety and product performance.
• The product warranty will not cover damage or injury caused by the use of
unauthorized components.
• It is recommend that use the supplied components.
• If you use generic cables not certified by LG, the screen may not display or there
may be image noises.
NOTE
• The components may look different from those illustrated here.
• Without prior notice, all product information and specifications contained in this
manual are subject to change to improve the performance of the product.
• To purchase optional accessories, visit an electronics store or an online shopping
site, or contact the retailer from which you purchased the product.
• The power cord provided may differ depending upon the region.
Supported Drivers and Software
Check the drivers and software supported by your product and refer to the manuals
on the CD enclosed in the product package.
Drivers and Software Installation Priority 38UC99, 38CB99
Monitor Driver Recommended O
ASM Driver Required X
OnScreen Control Recommended O
Dual Controller Optional X
True Color Pro Optional X
• Required and Recommended: You can download and install the latest version from
the enclosed CD or from the LGE website (www.lg.com).
• Optional: You can download and install the latest version from the LGE website
(www.lg.com).
6
ENGLISH
Product and Button Description
Joystick Button / Power LED
• On: Power on
• Off: Power off
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or
moving it left/right with your finger.
Basic Functions
Power on Press the joystick button once with
your finger to turn on the monitor.
Power off
Press and hold the joystick button
once with your finger to turn off the
monitor.
/ Volume
Control
You can control the volume by moving
the joystick button left/right.
NOTE
• The joystick button is located at the bottom of the monitor.
7
ENGLISH
Input Connector
8
ENGLISH
• When holding the monitor, the screen should face away from you to prevent it
from being scratched.
• When transporting the monitor, do not expose the monitor to shock or excessive
vibration.
• When moving the monitor, keep it upright and never turn the monitor on its side or
tilt it sideways.
CAUTION
• Avoid touching the monitor screen as much as possible.
- This may result in damage to the screen or some of the pixels used to create
images.
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor
from being scratched or damaged and to ensure safe transportation, regardless of
its shape or size.
• Place the monitor in the original box or packing material before attempting to
move it.
• Before moving or lifting the monitor, disconnect the power cord and all other
cables.
• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
9
ENGLISH
• If you use the monitor panel without the stand base, its joystick button may cause
the monitor to become unstable and fall, resulting in damage to the monitor or
human injury. In addition, this may cause the joystick button to malfunction.
10
ENGLISH
Installing the Monitor
Assembling the Stand
1
CAUTION
• To protect the screen, place the screen face down on the screen pad which is inside
the box.
2
11
ENGLISH
3
Stand Body
Cable Holder
* Assemble the
Cable Holder.
Stand Base
or
4
5
12
ENGLISH
NOTE
• Press the stand until the button reaches the top.
CAUTION
• Illustrations in this document represent typical procedures, so they may look
different from the actual product.
• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when
assembling the product. (Doing so may damage the product.)
• Applying excessive force when tightening screws may cause damage to the
monitor. Damage caused in this way will not be covered by the product warranty.
• Do not carry the monitor upside down by just holding the base. This may cause the
monitor to fall off the stand and could result in personal injury.
• When lifting or moving the monitor, do not touch the monitor screen. The force
applied to the monitor screen may cause damage to it.
Installing on a Table
1 Lift the monitor and place it on the table in an upright position. Place the
monitor at least 100 mm (3.9 inches) away from the wall to ensure sufficient
ventilation.
100 mm
(3.9 inches) 100 mm
(3.9 inches)
100 mm
(3.9 inches)
100 mm
(3.9 inches)
13
ENGLISH
2 Connect the power adapter to the monitor and then plug the power cord into
the wall outlet.
3 Press the joystick button on the bottom of the monitor to turn on the monitor.
CAUTION
• Unplug the power cord before moving or installing the monitor. There is risk of
electric shock.
Cautions When Connecting Power Cord
100-240 V ~
• Make sure to use the power cord that is provided in the product package and
connect it to a grounded power outlet.
• If you need another power cord, please contact your local dealer or the nearest
retail store.
14
ENGLISH
Adjusting the Stand Height
1 Place the monitor mounted on the stand base in an upright position.
2 Handle the monitor with both hands for safety.
Max 110.0 mm
(4.3 inches)
WARNING
• When adjusting the screen height, do not place your hand on
the stand body to avoid injury to your fingers.
Adjusting the Angle
1 Place the monitor mounted on the stand base in an upright position.
2 Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 15° for a
comfortable viewing experience.
-515
Front
Rear
15
ENGLISH
WARNING
• To avoid injury to the fingers when adjusting the screen, do not hold the lower part
of the monitor’s frame as illustrated below.
-515
• Be careful not to touch or press the screen area when adjusting the angle of the
monitor.
-515
NOTE
• The left or right side of the monitor head can be slightly rotated up or down (up to
3°). Adjust the horizontal level of the monitor head.
Monitor head
16
ENGLISH
Tidying up Cables
Arrange the cables using the cable holder as shown in the illustration.
Cable holder
Using the Kensington Lock
The connector for the Kensington security system is located at the bottom of the
monitor.
For more information on installation and usage, refer to the Kensington lock owner’s
manual or visit the website at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
NOTE
• The Kensington security system is optional. You can obtain optional accessories
from most electronics stores.
17
ENGLISH
Detaching the Stand Body
1 Place the monitor’s screen face down. To protect the screen from scratches,
cover the surface with a soft cloth.
2 Remove the stand from the monitor by pressing the button on the bottom
center of the back of the monitor.
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount plate or other compatible
devices.
1 Place the screen face down. To protect the monitor panel (screen), cover the
surface with a soft cloth or the monitor protection pad included in the product
package.
2 Remove the four screws tightened on the back of the monitor.
3 Place the wall mount plate onto the monitor and align it with the screw holes.
4 Tighten the four screws using a screwdriver to fix the plate to the monitor.
NOTE
• The wall mount plate is sold separately.
• For more information on installation, refer to the wall mount plate’s installation
guide.
• Be careful not to apply too much force while mounting the wall mount plate as it
may cause damage to the screen.
18
ENGLISH
Installing on the Wall
Install the monitor at least 100 mm (3.9 inches) away from the wall and leave about
100 mm (3.9 inches) of space at each side of the monitor to ensure sufficient
ventilation. Detailed installation instructions can be obtained from your local retail
store. Alternatively, please refer to the manual for how to install and set up a tilting
wall mounting bracket.
100 mm
(3.9 inches)
100 mm
(3.9 inches)
100 mm
(3.9 inches)
100 mm
(3.9 inches)
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back
of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the
wall.
1 If you use screws longer than the standard length, it may damage the inside of
the product.
2 A non-VESA standard screw may damage the product and cause the monitor
to fall. LG Electronics is not liable for any accidents relating to the use of non-
standard screws.
Wall Mount (mm) 100 x 100
Stand Screw M4 x L10
Required Screws 4
Wall Mount Plate (Optional) RW120
19
ENGLISH
NOTE
• Use the screws specified by VESA standards.
• The wall mount kit includes the installation guide and all necessary parts.
• The wall mounting bracket is optional. You can obtain optional accessories from
your local dealer.
• The length of the screw may differ for each wall mounting bracket. Be sure to use
the proper length.
• For more information, please refer to the user manual for the wall mounting
bracket.
CAUTION
• Unplug the power cord before moving or installing the monitor to avoid electric
shock.
• Installing the monitor on the ceiling or on a slanted wall may result in the monitor
falling off, which could lead to injury. Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
• Applying excessive force when tightening screws may cause damage to the
monitor. Damage caused in this way will not be covered by the product warranty.
• Use the wall mounting bracket and screws that conform to VESA standards.
Damage caused by the use or misuse of inappropriate components will not be
covered by the product warranty.
• When measured from the back of the monitor, the length of each installed screw
must be 8 mm (0.3 inches) or less.
Wall Mount Plate
Back of the Monitor
Screw
Dimensions
: M4 x L10
Wall Mount Plate
Back of the
Monitor
Max 8 mm
(0.3 inches)
20
ENGLISH
USING THE MONITOR
• The following instructions are based on the 38UC99 model. Illustrations in this
manual may differ from the actual product.
Press the joystick button, go to Menu → Input, and then select the input option.
CAUTION
• Do not press the screen for a prolonged time. This may cause image distortion.
• Do not display a still image on the screen for a prolonged time. This may cause
image retention. Use a screensaver if possible.
NOTE
• When connecting the power cord to the outlet, use a grounded (3-hole) power
strip or a grounded power outlet.
• The monitor may flicker when turned on in an area where the temperature is low.
This is normal.
• Sometimes red, green, or blue spots may appear on the screen. This is normal.
Connecting to a PC
• This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to your computer without
having to reconfigure anything or install any manual drivers.
HDMI Connection
Transmits digital video and audio signals from your PC to the monitor. Connect your
PC to the monitor using the HDMI cable as shown in the illustration below.
21
ENGLISH
CAUTION
• Make sure to use the supplied HDMI cable of the product. Otherwise, this may
cause the device to malfunction.
• Connecting your PC to the monitor using the HDMI cable may cause device
compatibility issues.
• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility
issues.
• Use a certified cable with the HDMI logo attached. If you do not use a certified
HDMI cable, the screen may not display or a connection error may occur.
• Recommended HDMI cable types
- High-Speed HDMI®/TM cable
- High-Speed HDMI®/TM cable with Ethernet
DisplayPort Connection
Transmits digital video and audio signals from your PC to the monitor. Connect the
monitor to your PC using the DisplayPort cable as shown in the illustration below.
DP OUT
NOTE
• There may be no video or audio output depending on the DP (DisplayPort) version
of the PC.
• Make sure to use the supplied DisplayPort cable of the product. Otherwise, this
may cause the device to malfunction.
• For using Mini DP to DP (Mini DisplayPort to DisplayPort) cable, it is recommended
that you use DisplayPort 1.2 cable.
22
ENGLISH
USB-C connection
Transmits digital video and audio signals and USB data from your PC to the monitor.
Connect the monitor to your PC using the USB-C cable as shown in the illustration
below. Press the menu button and then select the input option from the input menu.
(USB C-C cable)
NOTE
• PD (Power Delivery), DP Alternate Mode (DP over USB-C) and USB Data are
supported via USB-C Port.
• Features may not work properly depending on the connected device’s specifications
and the environment.
• USB-C port is not for the Monitor Power source but for a PC power source.
Connect Adapter to supply power to the Monitor.
(sold separately)(USB C-C cable +
USB C-A Gender)
23
ENGLISH
Connecting AV Devices
HDMI Connection
HDMI transmits digital video and audio signals from your AV device to the monitor.
Connect your AV device to the monitor using the HDMI cable as shown in the
illustration below.
AV
NOTE
• Make sure to use the supplied HDMI cable of the product. Otherwise, this may
cause the device to malfunction.
• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility
issues.
• Use a certified cable with the HDMI logo attached. If you do not use a certified
HDMI cable, the screen may not display or a connection error may occur.
• Recommended HDMI cable types
- High-Speed HDMI®/TM cable
- High-Speed HDMI®/TM cable with Ethernet
Connecting Peripherals
USB Cable connection
The USB port on the product functions as a USB hub.
Please connect the USB C-C cable or USB C-C cable + USB C-A gender to the PC.
To use USB 3.0, connect the USB C-C cable + USB C-A gender of the product to the PC.
Peripheral devices connected to the USB IN port can be controlled from the PC.
(sold separately)
(sold separately)
24
ENGLISH
NOTE
• Make sure to install the most recent Windows OS service pack before using the
product.
• Peripheral devices are sold separately.
• A keyboard, mouse, or USB device can be connected to the USB port.
• Quick Charge is available through the USB1 and USB2 port.
• When the Monitor is gone to Power off, Quick Charge is not available.
• The charging speed may vary depending on the device.
(sold separately)
CAUTION
Cautions When Using a USB Device
• A USB device with an automatic recognition program installed, or that uses its own
driver, may not be recognized.
• Some USB devices may not be supported or may not work properly.
• It is recommended to use a USB hub or hard disk drive with power supplied. (If the
power supply is not adequate, the USB device may not be recognized properly.)
Connecting Headphones
Connect peripherals to the monitor via the headphones port. Connect as illustrated.
(sold separately)
NOTE
• Peripheral devices are sold separately.
• If you use angled earphones, it may cause a problem with connecting another
external device to the monitor. Therefore, it is recommended to use straight
earphones.
Angled Straight
• Depending on the audio settings of the PC and external device, headphones and
speaker functions may be limited.
25
ENGLISH
Service only port
The port is used only for "Service".
26
ENGLISH
USER SETTINGS
Activating the Main Menu
1 Press the joystick button on the bottom of the
monitor.
2 Move the joystick up/down ( / ) and left/right
( / ) to set the options.
3 Press the joystick button once more to exit the
main menu.
Joystick Button
Button Menu Status Description
Main menu disabled Enables the main menu.
Main menu enabled
Exits the main menu.
(Holding down the button to turn off the monitor. You can
turn off the monitor this way at any time, including when the
OSD is on.)
Main menu disabled Adjusts the monitor volume level.
Main menu enabled Enters the Input features.
Main menu disabled Adjusts the monitor volume level.
Main menu enabled Enters the Menu feature.
Main menu disabled Displays the information on the current input.
Main menu enabled Turns off the monitor.
Main menu disabled Displays the information on the current input.
Main menu enabled Enters the Bluetooth Audio feature.
27
ENGLISH
Main Menu Features
Power Off
Input Menu
Bluetooth Audio
Exit
Main Menu Description
Input Sets input mode.
Power Off Turns off the monitor.
Menu Configures the screen settings.
Bluetooth Audio Reconnects to previously connected Bluetooth devices or disconnects from already connected Bluetooth
devices.
Exit Exits the main menu.
28
ENGLISH
User Settings
Menu Settings
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Configure the options by moving the joystick up/down/left/right.
3 To return to the upper menu or set other menu items, move the joystick to or by pressing ( / Ok).
4 If you want to exit the OSD menu, move the joystick to until you exit.
• When you enter the menu, instructions on how to use the button will appear in the bottom right corner of the screen.
Quick Settings Input Picture Sound General
29
ENGLISH
Each option is described below.
Menu Description
Quick Settings Brightness Adjusts the color contrast and brightness of the screen.
Contrast
Volume Adjusts the volume level.
NOTE
• You can adjust Mute / Unmute by moving the joystick button to in the Volume menu.
• The available minimum and maximum volumes for Bluetooth Audio depend on the monitor's OSD volume.
Screen Off Turns off the monitor's backlight and plays only the audio from the connected input or Bluetooth device.
Bluetooth Audio Reconnects to previously connected Bluetooth devices or disconnects from already connected Bluetooth devices.
Input Main Input List Selects the input mode.
Aspect Ratio Adjusts the aspect ratio of the screen.
PBP Displays the screens of two input modes on one monitor.
Main/ Sub Screen
Change Toggles between the main screen and sub screen in PBP mode.
Main/ Sub Sound
Change Toggles between the audio of the main screen and sub screen in PBP mode.
Auto Input Switch When automatic input switch is set to On, display will automatically switch to new input when connected.
30
ENGLISH
Picture Picture Mode Changes the picture mode to the one optimized for a given feature.
Picture Adjust Adjusts the Brightness, Contrast, Sharpness, SUPER RESOLUTION+, Black Level, and DFC.
Game Adjust Adjusts the Response Time, FreeSync, Black Stabilizer, and 1ms Motion Blur Reduction.
Color Adjust Adjusts the Gamma, Color Temp, Red, Green, Blue, and Six Color.
Screen Off Turns off the monitor's backlight and plays only the audio from the connected input or Bluetooth device.
Picture Reset Returns picture to the default settings.
Sound Adjusts the Volume, and Bluetooth Audio Mode.
General Sets Language, SMART ENERGY SAVING, Power LED, Automatic Standby, HDMI Compatibility Mode, DisplayPort 1.2,
Quick Charge, OSD Lock, and Reset.
Exit Exits the OSD menu.
CAUTION
• Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
31
ENGLISH
Quick Settings
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to Quick Settings by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to or by pressing ( / Ok).
5 If you want to exit the OSD menu, move the joystick to until you exit.
Quick Settings
Quick Settings
Brightness 100 >
Contrast 70 >
Input
Volume 30 >
Screen Off >
Picture
Bluetooth Audio Off >
Sound
General
: Exit / : Move / : Ok
32
ENGLISH
Each option is described below.
Menu > Quick
Settings Description
Brightness Adjusts the color contrast and brightness of the screen.
Contrast
Volume Adjusts the volume level.
NOTE
• You can adjust Mute / Unmute by moving the joystick button to in the Volume menu.
• The available minimum and maximum volumes for Bluetooth Audio depend on the monitor's OSD volume.
Screen Off Turns off the monitor's backlight and plays only the audio from the connected input or Bluetooth device. The audio continues to play even after the screen
turns off.
NOTE
• To turn the screen back on, press the joystick button on the bottom of the monitor.
Bluetooth Audio Reconnects to previously connected Bluetooth devices or disconnects from already connected Bluetooth devices.
NOTE
• The monitor can only reconnect if it was previously connected to a Bluetooth device.
33
ENGLISH
Input
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to Input by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to or by pressing ( / Ok).
5 If you want to exit the OSD menu, move the joystick to until you exit.
Input
HDMI1
Quick Settings
Input
Main Input List >
Picture
Aspect Ratio Full Wide >
Sound
PBP >
Main/Sub Screen Change
General
Main/Sub Sound Change
Auto Input Switch On >
: Exit / : Move / : Ok
34
ENGLISH
Each option is described below.
Menu > Input Description
Main Input List Selects the input mode.
Aspect Ratio Adjusts the aspect ratio of the screen.
Full Wide Displays the video in widescreen, regardless of the video signal input.
Original Displays video according to the aspect ratio of the video signal input.
1:1 The aspect ratio is not adjusted from the original.
Cinema1 Enlarges the screen with an aspect ratio of 21:9. (at 1080p)
Cinema2 Enlarges the screen with an aspect ratio of 21:9, including the black box at the bottom for subtitles. (at 1080p)
NOTE
• The display may look the same for Full Wide, Original, and 1:1 options at the recommended resolution (3840 x 1600).
• There is no 1:1, Cinema1, Cinema2 menu on FreeSync Mode.
( Go to Picture • Game Adjust • FreeSync, to set FreeSync On or Off)
PBP Displays the screens of two input modes on one monitor.
Main/Sub Screen
Change Toggles between the main screen and sub screen in PBP mode.
Main/Sub Sound
Change Toggles between the audio of the main screen and sub screen in PBP mode.
Auto Input Switch When automatic input switch is set to On, display will automatically switch to new input when connected.
35
ENGLISH
[PBP]
Menu > Input Description
Input List Displays the screens of two input modes on one monitor.
Main Input List PBP combinations are not supported between HDMI inputs or DisplayPort inputs.
Sub Input List
PBP Connection Sub Screen (Right)
HDMI 1 HDMI 2 DisplayPort USB-C
Main Screen
(Left)
HDMI 1 X X O O
HDMI 2 X X O O
DisplayPort O O X X
USB-C O O X X
Aspect Ratio Adjusts the aspect ratio of the screen.
Main Aspect
Ratio
Full Wide Displays the video to fit the PBP screen, regardless of the video signal input.
Original Displays the video in the aspect ratio of the video signal input on the PBP screen.
Sub Aspect
Ratio
Full Wide Displays the video to fit the PBP screen, regardless of the video signal input.
Original Displays the video in the aspect ratio of the video signal input on the PBP screen.
PBP You can disable the feature that displays images from two input modes simultaneously on one monitor.
Main/Sub Screen
Change Toggles between the main screen and sub screen in PBP mode.
Main/Sub Sound
Change Toggles between the audio of the main screen and sub screen in PBP mode.
Auto Input Switch When automatic input switch is set to On, display will automatically switch to new input when connected.
NOTE
• If not using the PBP feature, Main/Sub Screen Change and Main/Sub Sound Change are deactivated.
36
ENGLISH
Picture
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to Picture by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to or by pressing ( / Ok).
5 If you want to exit the OSD menu, move the joystick to until you exit.
Picture
Quick Settings
Picture Mode Custom >
Picture Adjust >
Input
Game Adjust >
Color Adjust >
Picture
Screen Off >
Picture Reset >
Sound
General
: Exit / : Move / : Ok
37
ENGLISH
Each option is described below.
Menu > Picture Description
Picture Mode Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Reader Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.
Photo Optimizes the screen for photos.
Cinema Optimizes the screen for video.
Dark Room 1 This mode adjusts the brightness to the optimal level for working in a dark environment.
Dark Room 2 This mode sets the brightness to a lower level than Dark Room 1.
Color Weakness This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish
between the two colors.
FPS Game 1 This mode is optimized for FPS games.
FPS Game 2 It has a higher Black Stabilizer value than FPS Game 1. It is suitable for very dark FPS games.
RTS Game This mode is optimized for RTS Game.
Custom (Game) In this mode, users can customize various elements including game-related options.
NOTE
• If the Picture Mode is changed in the DP (DisplayPort) input, the screen may flicker or the resolution of your PC screen may be affected.
38
ENGLISH
Menu > Picture Description
Picture Adjust Brightness
Adjusts the color contrast and brightness of the screen.
Contrast
Sharpness Adjusts the sharpness of the screen.
SUPER
RESOLUTION+
High Optimizes the screen for crystal clear images. Best for high-definition video or games.
Middle Optimizes the screen for comfortable viewing, with images at the middle level between the low and high
modes. Best for UCC or SD videos.
Low Optimizes the screen for smooth and natural images. Best for still images or images with less movement.
Off Displays in the most common setting. Disables SUPER RESOLUTION+.
NOTE
• Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for
normal text or for desktop icons. Doing so may result in unnecessarily high sharpness.
Black Level Sets the offset level (for HDMI only).
• Offset: as a reference for a video signal, this is the darkest color the monitor can display.
High Keeps the current contrast ratio of the screen.
Low Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
DFC On Adjusts the brightness automatically according to the screen.
Off Disables the DFC feature.
39
ENGLISH
Menu > Picture Description
Game Adjust Response Time Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Normal. For a fast-moving picture, it is recommended that you use
Fast.
Setting to Fast may cause image sticking.
Fast Sets the response time to high.
Normal Sets the response time to middle.
Slow Sets the response time to low.
Off Does not use the response time improvement feature.
FreeSync Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.
CAUTION
• Supported Interface: DisplayPort
• Supported Graphic Card: A graphic card that supports AMD’s FreeSync is necessary.
• Supported Version: Make sure to update the graphic card to the latest driver.
• For more information and requirement, refer to AMD website at http://www.amd.com/FreeSync.
On FreeSync function on.
NOTE
• When FreeSync function is On, the brightness is reduced.
Off FreeSync function off.
40
ENGLISH
Menu > Picture Description
Game Adjust Black Stabilizer You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark
game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.
1ms Motion Blur
Reduction
On This mode minimizes motion blur in fast-moving videos. This function only works for frame rates (vertical
frequency) of 75Hz. To take full advantage of this function, select 3840x1600 @ 75Hz for DisplayPort
(DP) or HDMI inputs before enabling 1ms Motion Blur Reduction.
This function is available for 75 Hz only.
Off Turns 1ms Motion Blur Reduction Mode off.
NOTE
• To reduce motion blur, brightness is reduced with backlight control.
• 1ms Motion Blur Reduction and FreeSync cannot be enabled simultaneously.
• This function is game-optimized.
• It is recommended to turn off when you are not using the gaming function.
41
ENGLISH
Menu > Picture Description
Color Adjust Gamma Custom gamma settings: Gamma 0, Gamma 1, Gamma 2. The higher the gamma value, the darker the image becomes. Likewise,
the lower the gamma value, the lighter the image becomes.
Color Temp Custom The user can adjust it to red, green, or blue by customization.
Warm Sets the screen color to a reddish tone.
Medium Sets the screen color to between a red and blue tone.
Cool Sets the screen color to a bluish tone.
Red You can customize the picture color using Red, Green, and Blue colors.
Green
Blue
Six Color Meets the user requirements for colors by adjusting the hue and saturation of the six colors (red, green, blue, cyan, magenta, and
yellow) and then saving the settings.
Hue Adjusts the tone of the screen colors.
Saturation Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors
become. The higher the value, the more saturated and darker the colors become.
Screen Off Turns off the monitor's backlight and plays only the audio from the connected input or Bluetooth device.
Picture Reset Returns picture to the default settings.
42
ENGLISH
Sound
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to Sound by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to or by pressing ( / Ok).
5 If you want to exit the OSD menu, move the joystick to until you exit.
Sound
Quick Settings
Volume 30 >
Bluetooth Audio Off >
Input
Picture
Sound
General
: Exit / : Move / : Ok
43
ENGLISH
Each option is described below.
Menu > Sound Description
Volume Adjusts the volume level.
NOTE
• You can adjust Mute / Unmute by moving the joystick button to in the Volume menu.
• The available minimum and maximum volumes for Bluetooth Audio depend on the monitor's OSD volume.
Bluetooth Audio On Connects to a previously connected Bluetooth device.
Off Disconnects from an already connected Bluetooth device.
NOTE
• If there is no input signal while a Bluetooth device is connected, a message is displayed for 10 minutes.
• If there is no input signal while a Bluetooth device is streaming, the monitor will not enter the power-saving mode and remain off.
44
ENGLISH
General
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to General by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to or by pressing ( / Ok).
5 If you want to exit the OSD menu, move the joystick to until you exit.
General
Quick Settings
Language English >
SMART ENERGY SAVING Low >
Input
Power LED Off >
Automatic Standby Off >
Picture
HDMI Compatibility Mode Off >
DisplayPort 1.2 Enable >
Sound
Quick Charge Off >
OSD Lock Off >
General
Reset >
: Exit / : Move / : Ok
45
ENGLISH
Each option is described below.
Menu > General Description
Language Sets the menu screen to the desired language.
SMART ENERGY
SAVING
Conserve energy by using luminance compensation algorithm.
High Saves energy using the high-efficiency SMART ENERGY SAVING feature.
Low Saves energy using the low-efficiency SMART ENERGY SAVING feature.
Off Disables the SMART ENERGY SAVING feature.
Power LED Turns the power LED on the front of the monitor On or Off.
On The power LED turns on automatically.
Off The power LED turns off.
Automatic Standby Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off
function. (Off, 4 H, 6 H, and 8 H)
HDMI Compatibility
Mode
HDMI Compatibility Mode feature can recognize the legacy equipment that does not support HDMI 2.0.
On Enables HDMI Compatibility Mode.
Off Disables HDMI Compatibility Mode.
DisplayPort 1.2 Enables or disables DisplayPort 1.2.
NOTE
• Be sure to configure this option according to the DisplayPort version supported by your graphic card. Set this option to Disable if your graphic card
does not support DisplayPort 1.2.
46
ENGLISH
Menu > General Description
Quick Charge Quick Charge is a feature that rapidly charges the device connected to the USB 3.0 port.
On Enables Quick Charge.
Off Disables Quick Charge.
NOTE
• The charging speed may vary depending on the device.
OSD Lock This feature disables the configuration and adjustment of menus.
On Enables OSD Lock.
Off Disables OSD Lock.
NOTE
• All features are disabled except Brightness, Contrast, Volume in Quick Settings, Input and OSD Lock in General.
Reset Do you want to reset your settings?
No Cancel the reset.
Yes Restores the default settings.
NOTE
• Saving Data depends on the Panel. These values vary by panel and vendor. If the option of SMART ENERGY SAVING is set High or Low, monitor luminance becomes higher or
lower depending upon the source.
47
ENGLISH
TROUBLESHOOTING
Nothing is displayed on the screen.
Is the monitor's power cord plugged in? • Check if the power cord is correctly plugged into the power outlet.
Is the power LED on? • Check the power cable connection and press the power button.
Is the power on and the power LED
displaying white?
• Check that the connected input is enabled (Menu > Input).
Is the power LED blinking? • If the monitor is in sleep mode, move the mouse, or press any key on the keyboard, to switch the display on.
• Check if the computer is turned on.
Is the OUT OF RANGE message being
displayed?
• This occurs when signals transferred from the PC (graphic card) are out of the horizontal or vertical frequency range of the
monitor. Please see the Product Specification section of this manual to set the appropriate frequency.
Is the No Signal message being
displayed?
• This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and
reconnect it.
The screen may not be displayed properly
when configuring DisplayPort 1.2 in a Mac
product.
• DisplayPort 1.2 may not be supported depending upon the Mac product. Please contact the manufacturer.
The OSD Lock message is being displayed.
Are some functions not available when
you press the Menu button?
• The OSD is locked. Go to Menu > General and set OSD Lock to Off.
48
ENGLISH
The screen retains an image.
Does image sticking occur even when the
monitor is turned off?
• Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.
• To extend the lifetime of the monitor, use a screensaver.
Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution? • If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or
the recommended resolution.
NOTE
• Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per second, like a fluorescent lamp. The number of times the screen is refreshed
per second is called vertical frequency, or refresh rate, and is represented by Hz.
• Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle. If 1 is divided by the horizontal interval, the result is the number of horizontal
lines displayed per second. This is called horizontal frequency and is represented by kHz.
• Check if the graphic card’s resolution or frequency is within the range allowed by the monitor and set it to the recommended (optimal) resolution Control Panel > Display >
Settings in Windows. (The settings may differ depending on the operating system (OS) you use.)
• Not setting the graphic card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.
• The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the
graphic card. If this is the case, contact the manufacturer of the computer or graphic card for assistance.
• Some graphic cards may not support 3840 x 1600 resolution. If the resolution cannot be displayed, contact the manufacturer of your graphic card.
49
ENGLISH
The display color is abnormal.
Does the display appear discolored
(16 colors)?
• Set the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality. (The
settings may differ depending on the operating system (OS) you use.)
Does the display color appear unstable or
monochrome?
• Check if the signal cable is connected properly. Reconnect the cable or reinsert the PC's graphic card.
Are there spots on the screen? • When using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD
screen. It is not an error, nor is it related to the monitor's performance.
Do you see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message?
Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also
download the driver from our web site: http://www.lg.com.
• Make sure to check if the graphic card supports Plug and Play function.
No sound from the headphone port.
Are images displayed using DP
(DisplayPort) or HDMI input without
sound?
• Make sure that the headphone port connections are made properly.
• Try increasing the volume with the joystick.
• Set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel > Hardware and
Sound > Sound > set the Monitor as default device. (The settings may differ depending on the operating system (OS) you use.)
50
ENGLISH
PRODUCT SPECIFICATION
LCD Screen Type TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Color Depth HDMI 8-bit color is supported.
DP (DisplayPort) 8-bit / 10-bit color is supported.
Pixel Pitch 0.22908 mm x 0.22908 mm
Resolution Max Resolution 3840 x 1600 @ 75 Hz
Recommended Resolution 3840 x 1600 @ 60 Hz
Video Signal Horizontal Frequency 30 kHz to 125 kHz
Vertical Frequency 56 Hz to 75 Hz
Synchronization Separate Sync.
Input Connector H/P OUT, HDMI IN 1/2, DP (DisplayPort) IN, USB ( ) 1/2, USB-C ( )
Power Sources Power Rating 19 V 7.7 A
Power Consumption
(Typical)
Operating Mode: 70 W (Typical, USB excluded) (Outgoing condition)*
48 W (ENERGY STAR® standard)**
Sleep Mode: ≤ 1.2 W
Off Mode: ≤ 0.3 W
AC/DC Adapter DA-180C19 type, manufactured by APD
Output: 19 V 9.48 A
51
ENGLISH
Environmental
Conditions
Operating Conditions Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity Less than 80 %
Storing Conditions Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Humidity Less than 85 %
Dimensions Monitor Size (Width x Height x Depth)
With Stand 897.2 mm x 466.2 mm x 230.4 mm
(35.3 inches x 18.3 inches x 9.0 inches)
Without Stand 897.2 mm x 394.0 mm x 91.5 mm
(35.3 inches x 15.5 inches x 3.6 inches)
Weight (Without
Packaging)
With Stand 9.3 kg (20.5 lbs)
Without Stand 7.7 kg (16.9 lbs)
Specifications are subject to change without notice.
* The Operating Mode of Power Consumption is measured with LGE test standard. (Full White pattern, Maximum resolution)
** The Power Consumption level can be different by operating condition and monitor setting.
** The Operating Mode of Power Consumption is measured with ENERGY STAR® test standard.
52
ENGLISH
Factory Support Mode
(Preset Mode, HDMI/ DisplayPort/ USB-C PC)
Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks
640 x 480 31.469 59.94 -/-
800 x 600 37.879 60.317 +/+
1024 x 768 48.363 60.0 -/-
1152 x 864 54.347 60.05 +/+
1280 x 720 45 60 +/+
1280 x 1024 63.981 60.02 +/+
1600 x 900 60.00 60.00 +/+
1680 x 1050 65.29 59.954 -/+
1920 x 1080 67.50 60 +/-
1920 x 1080 83.894 74.973 +/-
3440 x 1440 88.82 59.97 +/-
3440 x 1440 110.77 75.05 +/-
3840 x 1600 50.39 29.99 +/-
3840 x 1600 102.23 59.99 +/-
3840 x 1600 128.69 75 +/-
53
ENGLISH
HDMI Timing (Video)
Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz)
640 x 480p 31.47 60
720 x 480p 31.47 60
720 x 576p 31.25 50
1280 x 720p 45 60
1280 x 720p 37.5 50
1920 x 1080p 67.5 60
1920 x 1080p 56.25 50
2560 x 1080p 56.25 60
2560 x 1080p 66 50
1920 x 1080i 28.125 50
1920 x 1080i 33.75 60
Power LED
Mode LED Color
On Mode White (For a few seconds)
Sleep Mode White Blinking
Off Mode Off
Wireless module (WB1NP6) Specifications
Bluetooth
Frequency range Output power (Max.)
2400 to 2483.5 MHz 10 dBm
• As band channels can vary per country, the user cannot change or adjust the
operating frequency. This product is configured for the regional frequency
table.
• For consideration of the user, this device should be installed and operated with
a minimum distance of 20 cm (7.8 inches) between the device and the body.
• FCC ID: BEJ9QK-DMWB1NP6 / IC: 2703H-DMWB1NP6
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is
contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge
covering the cost of performing such distribution (such as the cost of media, shipping,
and handling) upon email request to opensource@lge.com. This offer is valid for three (3)
years from the date on which you purchased the product.
This device meets the EMC requirements for home appliances (Class B) and is intended
for home usage. This device can be used in all regions. Read the owner's manual (CD)
carefully and keep it at hand. Please note that the label attached to the product provides
information for technical support.
Model
Serial No.
Declaration of Conformity
Trade Name: LG
Model: 38UC99, 38CB99
Responsible Party: LG Electronics Inc.
Address: 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A
TEL: 201-266-2534